The Most Powerful Low Prime Adult Oxygenator
Transcription
The Most Powerful Low Prime Adult Oxygenator
Flexible set-up for different needs PrimO2X is supplied with two different brackets, with or without integrated water connections, both of which ensure optimum positioning of the device on the heart lung machine. TECHNICAL CHARACTERISTICS Max. blood flow 8000 ml/min Membrane type Microporous polypropylene Membrane surface area 1.87 m2 Heat exchanger surface area 0.14 m2 Rigid venous reservoir volume 4300 ml Priming volume 250 ml Connections: Venous return 1/2” (12.7 mm) Venous reservoir outlet 3/8” (9.53 mm) Oxygenator venous inlet 3/8” Oxygenator arterial outlet 3/8” Cardiotomy inlet ports (6) Four 1/4” - Two 3/8” Cardiotomy accessory ports (5) Four female luer lock - One female pos lock Venous accessory ports (2) One female luer lock - One female pos lock The Most Powerful Low Prime Adult Oxygenator ORDER GUIDE PrimO2X with hardshell reservoir 050533 PrimO2X oxygenator module 050532 Bracket with integrated Hansen connectors 05046 Bracket without integrated Hansen connectors 050230500 Bracket for oxygenator module 050128 manufactured by: Sorin Group Italia S.r.l. Via Statale 12 Nord, 86 41037 Mirandola Modena Italy Tel +39 0535 29811 Fax +39 0535 24312 www.sorin.com [email protected] 09295-84 05/09 according to MDD 93/42/ECC emended by Directive 2007/47/EC Leveraging over 25 years experience In oxygenation on over 25 years of experience in the development of cardiopulmonary products. PrimO2X combines the leading advantages of oxygenators by Sorin Biomedica, Dideco and Cobe Cardiovascular. Our common commitment to research and development will guarantee the availability of innovative cardiopulmonary products and perfusion systems for years to come. PrimO2X is the most powerful low prime adult oxygenator, as its design is optimised to satisfy high gas transfer demand whilst reducing hemodilution and minimizing foreign surface contact. Once you experience PrimO2X, you will understand why the Sorin Group sells more oxygenators than any other company in the world. “...very high gas transfer efficiency...” Heat Exchanger Performance Factor “...easy set up and priming, excellent overall performance...” “...the sequential cardiotomy filter dramatically reduces the dynamic hold up volume...”1 1 Market assessment study. 2005 Sorin Group. 0,80 H.E. Performance Factor PrimO2X, the first oxygenator system by the Sorin Group, is based 0,70 0,60 0,50 0,40 0,30 2,0 4,0 6,0 8,0 Blood flow ra te (l/min) NEW manifold mount for increased stability NEW caps for better retention during shipping/sterilization PrimO2X has the lowest priming volume in the range of adult oxygenators, contributing to the reduction of patient hemodilution. High Biocompatibility Advanced Reservoir Design NEW, bigger reservoir figures NEW, higher oxy module for enhanced reservoir rotation and gas port access 500 450 PrimO2X is a totally coated system. Phosphorylcholine (Ph.I.S.I.O.) treatment provides stable, hemocompatible coating, demonstrated* to be effective in improving platelet preservation and reducing platelet adhesion to foreign surfaces. The reservoir design and the low membrane surface area enhance system biocompatibility. *Perfusion 2002; 17:39-44 - “Phosphorylcholine coating offers natural platelet preservation during CPB” De Somer et Al-Gent University Hospital. 400 350 300 250 200 150 100 Intuitive, fast and easy set-up Easily recognised ports (also available in pre-connected configurations), pre-connected recirculation line and integrated cardioplegia port provide an intuitive, fast and easy set up: a useful advantage in emergency situations. Over-under pressure safety valve allows for VAVD application and post-operative chest drainage. Low Priming Volume The geometry of the sequential cardiotomy filter automatically adjusts to incoming suction flow requirements, thus reducing the reservoir dynamic hold-up volume. PrimO2X is the outcome of 25 years of experience in the manufacture of oxygenators with over 500,000 successful procedures performed in its current design configuration. 550 Tot O2 (cc/min) PrimO2X delivers the highest gas exchange using the lowest membrane surface area. Its high efficiency (gas exchange per square meter of membrane area) reduces foreign surface area exposed to blood contact while providing superior gas transfer. Its superior performance allows you to treat all adult patients even in the most critical situations. NEW manifold for easier A/V sampling Total O2Transfer Reliable Membrane Oxygenator 2,0 4,0 6,0 8,0 Flow ra te (l/min) The cross flow geometry of the gas module assures very high efficiency that produces a very high gas exchange, with a reduction of the foreign surface area in contact with the blood. Total CO2 Transfer 450 Tot CO2 (cc/min) Superior and Efficient Gas Transfer The PrimO2X cardiotomy filter has been designed to achieve high filtration performance (low hold-up volume and low breakthrough time) with extremely reduced surface contact with the blood. For this purpose, the filter comprises three modules which come into play sequentially depending on the volume of blood within the cardiotomy filter. This means that the filter automatically adapts to filtration requirements. 400 350 300 250 200 150 NEW rigid trays 100 2,0 4,0 6,0 8,0 Flow ra te (l/min) Performance data: In vitro tests with bovine blood at AAMI standard conditions Hgb: 12 ± 0,2 g/dl B.E.: 0 ± 5 mmol/l Blood Temp.: 37 ± 1 °C O2 Venous Sat.: 65 ± 5 % Venous pCO2: 45 ± 5 mmHg Water flow rate on water side = 10 lpm PrimO2X is available as a ‘stand-alone’ unit or as part of a pre-connected customized Perfusion Tubing System (PTS). In particular, Sorin Group can provide a complete Ph.I.S.I.O. coated cardiopulmonary by-pass circuit that perfectly matches the ease of use and biocompatible features of the device. Leveraging over 25 years experience In oxygenation on over 25 years of experience in the development of cardiopulmonary products. PrimO2X combines the leading advantages of oxygenators by Sorin Biomedica, Dideco and Cobe Cardiovascular. Our common commitment to research and development will guarantee the availability of innovative cardiopulmonary products and perfusion systems for years to come. PrimO2X is the most powerful low prime adult oxygenator, as its design is optimised to satisfy high gas transfer demand whilst reducing hemodilution and minimizing foreign surface contact. Once you experience PrimO2X, you will understand why the Sorin Group sells more oxygenators than any other company in the world. “...very high gas transfer efficiency...” Heat Exchanger Performance Factor “...easy set up and priming, excellent overall performance...” “...the sequential cardiotomy filter dramatically reduces the dynamic hold up volume...”1 1 Market assessment study. 2005 Sorin Group. 0,80 H.E. Performance Factor PrimO2X, the first oxygenator system by the Sorin Group, is based 0,70 0,60 0,50 0,40 0,30 2,0 4,0 6,0 8,0 Blood flow ra te (l/min) NEW manifold mount for increased stability NEW caps for better retention during shipping/sterilization PrimO2X has the lowest priming volume in the range of adult oxygenators, contributing to the reduction of patient hemodilution. High Biocompatibility Advanced Reservoir Design NEW, bigger reservoir figures NEW, higher oxy module for enhanced reservoir rotation and gas port access 500 450 PrimO2X is a totally coated system. Phosphorylcholine (Ph.I.S.I.O.) treatment provides stable, hemocompatible coating, demonstrated* to be effective in improving platelet preservation and reducing platelet adhesion to foreign surfaces. The reservoir design and the low membrane surface area enhance system biocompatibility. *Perfusion 2002; 17:39-44 - “Phosphorylcholine coating offers natural platelet preservation during CPB” De Somer et Al-Gent University Hospital. 400 350 300 250 200 150 100 Intuitive, fast and easy set-up Easily recognised ports (also available in pre-connected configurations), pre-connected recirculation line and integrated cardioplegia port provide an intuitive, fast and easy set up: a useful advantage in emergency situations. Over-under pressure safety valve allows for VAVD application and post-operative chest drainage. Low Priming Volume The geometry of the sequential cardiotomy filter automatically adjusts to incoming suction flow requirements, thus reducing the reservoir dynamic hold-up volume. PrimO2X is the outcome of 25 years of experience in the manufacture of oxygenators with over 500,000 successful procedures performed in its current design configuration. 550 Tot O2 (cc/min) PrimO2X delivers the highest gas exchange using the lowest membrane surface area. Its high efficiency (gas exchange per square meter of membrane area) reduces foreign surface area exposed to blood contact while providing superior gas transfer. Its superior performance allows you to treat all adult patients even in the most critical situations. NEW manifold for easier A/V sampling Total O2Transfer Reliable Membrane Oxygenator 2,0 4,0 6,0 8,0 Flow ra te (l/min) The cross flow geometry of the gas module assures very high efficiency that produces a very high gas exchange, with a reduction of the foreign surface area in contact with the blood. Total CO2 Transfer 450 Tot CO2 (cc/min) Superior and Efficient Gas Transfer The PrimO2X cardiotomy filter has been designed to achieve high filtration performance (low hold-up volume and low breakthrough time) with extremely reduced surface contact with the blood. For this purpose, the filter comprises three modules which come into play sequentially depending on the volume of blood within the cardiotomy filter. This means that the filter automatically adapts to filtration requirements. 400 350 300 250 200 150 NEW rigid trays 100 2,0 4,0 6,0 8,0 Flow ra te (l/min) Performance data: In vitro tests with bovine blood at AAMI standard conditions Hgb: 12 ± 0,2 g/dl B.E.: 0 ± 5 mmol/l Blood Temp.: 37 ± 1 °C O2 Venous Sat.: 65 ± 5 % Venous pCO2: 45 ± 5 mmHg Water flow rate on water side = 10 lpm PrimO2X is available as a ‘stand-alone’ unit or as part of a pre-connected customized Perfusion Tubing System (PTS). In particular, Sorin Group can provide a complete Ph.I.S.I.O. coated cardiopulmonary by-pass circuit that perfectly matches the ease of use and biocompatible features of the device. Flexible set-up for different needs PrimO2X is supplied with two different brackets, with or without integrated water connections, both of which ensure optimum positioning of the device on the heart lung machine. TECHNICAL CHARACTERISTICS Max. blood flow 8000 ml/min Membrane type Microporous polypropylene Membrane surface area 1.87 m2 Heat exchanger surface area 0.14 m2 Rigid venous reservoir volume 4300 ml Priming volume 250 ml Connections: Venous return 1/2” (12.7 mm) Venous reservoir outlet 3/8” (9.53 mm) Oxygenator venous inlet 3/8” Oxygenator arterial outlet 3/8” Cardiotomy inlet ports (6) Four 1/4” - Two 3/8” Cardiotomy accessory ports (5) Four female luer lock - One female pos lock Venous accessory ports (2) One female luer lock - One female pos lock The Most Powerful Low Prime Adult Oxygenator ORDER GUIDE PrimO2X with hardshell reservoir 050533 PrimO2X oxygenator module 050532 Bracket with integrated Hansen connectors 05046 Bracket without integrated Hansen connectors 050230500 Bracket for oxygenator module 050128 manufactured by: Sorin Group Italia S.r.l. Via Statale 12 Nord, 86 41037 Mirandola Modena Italy Tel +39 0535 29811 Fax +39 0535 24312 www.sorin.com [email protected] 09295-84 05/09 according to MDD 93/42/ECC emended by Directive 2007/47/EC