ag chemical - Dura Products

6660 E. 266th St, Suite 300
Arcadia, IN 46030
855-502-3872
www.DuraProducts.com
PREMIUM HIGH-FLOW
AG CHEMICAL
TRANSFER SYSTEMS
UP TO 15GPM
DP_AG_MINI_122015
DURA PRODUCTS
AG CHEMICAL CHART
COMPOUND
DURA-PUMP
/ High-Flow with up to 15GPM flow rate
DURA-METER
/ Self-priming diaphragm pump with
internal by-pass
/ New meter design for 2016 made of impact
resistant Lexan™ faceplate
/ Motor thermally protected from overheating
/ 100% moisture sealed circuitry makes meter
impervious to water intrusion
/ Suction port has 2” Male NPT and 1” Female NPT
™
/ 30 minute duty cycle
l
l
Degree Xtra®
l
l
FulTime® NXT
l
l
Callisto 480SC
l
Lexar® EZ
l
Lumax® EZ
l
Halex GT
l
®
Instinct®
l
Stylet-Oil
l
Shredder™ E-99
l
2,4-D Ester
l
Max-In Ultra ZMB
®
l
l
/ Same great menu driven backlit display
/ Pump is easily field serviceable with all parts
readily available
MSO, Crop Oil, Oil Based
/ Plumbed both for in-line and 90 degree applications
/ Features 2 Year Service Warranty plan
Roundup®
l
l
SureStart
l
l
/ Features 2 Year Service Warranty plan
DP-4012 12 volt
DP-3000E EPDM
DP-3000V Viton
®
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
Specifications
Operating Temp
Flow Rate
Meter Accuracy
Backlit Display
Maximum Pressure
Wetted Materials
-10˚F to 130˚F
DP-4015 110 volt
(Available in EPDM or Viton®)
Customer
should always
check calibration
before use
2 to 22GPM
+ / – .5%
Yes
40 PSI
Polypropylene; Ryton;
304 Stainless Steel;
EPDM or Viton® seals
NEW Features for 2016
2
VITON®
Atrazine
®
™
EPDM
/ Meter is now supported by a Quick List reference chart
/ Extended battery life with use of 4 “AAA” batteries
/ Faceplate over-molded with santoprene and filled with gel for improved shock resistance
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
Specifications
Check Valve
Vertical Suction Lift
Power Cord
Internal; EPA 165.45 compliant
Self-priming to 10ft
12 Volt: 20ft
110 Volt: 6.5ft
Motor
1/4 HP
Amps
12 Volt: 18.5
110 Volt: 2.0
Suction Port
Discharge Port
Wetted Materials
2” Male and 1” Female NPT thread
1” Female NPT thread
Polypropylene; Santoprene (73 shore);
304 Stainless Steel
®
l
Matador
l
Foliars
l
Nitrogen based
l
Fungicides
l
The Dura Products Chemical Compatibility Chart should
be considered as a guide only due to the many variables
which may affect the compatibility of materials. This guide is
based on the most recent information obtained from a variety of suppliers and chemical producers and is believed to
be accurate. Actual decisions on materials used need to be
tested and evaluated by the customer for each specific application. The responsibility of proper chemical compatibility of
equipment and material used is the full responsibility of the
customer. Dura Products does not warrant product damaged by
non-compatibility.
For a more comprehensive listing of chemicals, please visit our
website: www.DuraProducts.com
For help with the proper selection of pump for your application
needs, please call 855-502-3872
7
DURA-PUMP™ SPECIALTY SYSTEMS
MONSANTO TANK
Pumping System Contains
Pump
Discharge Hose
Camlock
For use with
Monsanto tanks
WITH Meter
WITHOUT Meter
DPMTSM-4312 12 Volt
DPMTSM-4315 110 Volt
High-Flow Dura-Pump™
1” x 12ft
MTS; direct attach to tote
Motor Bracket
Yes, rear
DPMTS-4012 12 Volt
Nozzle
Ball valve
DPMTS-4015 110 Volt
Meter
Dura-Meter™ (optional)
Other
All hose clamps, barbs
and nipples
(Available in EPDM or Viton®)
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
SNYDER / GEM CAP TANK
Pumping System Contains
Pump
Discharge Hose
GEM Cap Lid
Motor Bracket
WITH Meter
For use with Snyder
tanks with large 8” lid
WITHOUT Meter
DPGEMM-4312 12 Volt
DPGEM-4012 12 Volt
DPGEMM-4315 110 Volt
DPGEM-4015 110 Volt
(Available in EPDM or Viton )
®
Downtube
Nozzle
High-Flow Dura-Pump™
DURA-PUMP™
EASY CADDY
/ The Easy Caddy can be mounted
in 6 different configurations on a
variety of tank/tote and drum types
/ Use it mounted on top of tank, on
side of tank, or off the ground
depending on user preference
/ Conversion Kits are available to mount
system on 55 Gallon Drum, and on
Monsanto and Snyder type tanks
(see page 4)
WITH Meter
WITHOUT Meter
DPEM-4312 12 volt
DPE-4012 12 volt
DPEM-4315 110 volt
DPE-4015 110 volt
(Available in EPDM or Viton®)
1” x 12ft
Spin collar; all plumbing
assembled on pump
Yes; rear
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
Tanks/Totes/Drums sold separately.
1” Telescoping
Meter
Dura-Meter™ (optional)
Other
All hose clamps, barbs
and nipples
SIDE MOUNT
Easy Caddy secured
on side of tote
Ball valve
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
N-SERVE EASY CADDY
GROUND
Easy Caddy used
from the ground
Pumping System Contains
Pump
Discharge Hose
Suction Hose
Dry-Poppet Coupler
High-Flow Dura-Pump™
1” x 12ft; Premium XPLE
1” x 5ft; Premium XPLE
Available; sold separately
WITH Meter
WITHOUT Meter
DPEM-4612NV 12 Volt
DPE-4612NV 12 Volt
Meter
Dura-Meter™ (optional)
DPEM-4615NV 110 Volt
DPE-4615NV 110 Volt
Other
All hose clamps, barbs, nipples
Nozzle
Ball valve
Female Coupling
Dry Poppet
DP-C4010N
sold separately
Easy Caddy pumping system in Viton®
N-SERVE BOTTOM UNLOAD
Pumping System Contains
Pump
Discharge Hose
WITH Meter
WITHOUT Meter
DPBM-4312NV 12 Volt
DPB-4012NV 12 Volt
DPBM-4315NV 110 Volt
DPB-4015NV 110 Volt
6
Bottom Unload pumping system in Viton
®
Motor Bracket
Dry-Poppet Coupler
Nozzle
Available; sold separately
Ball valve
Meter
Dura-Meter™ (optional)
Other
All hose clamps, barbs, nipples
Pumping System Contains
Suction Hose
1” x 12ft; Premium XPLE
Female Coupling
Dry Poppet
DP-C4010N
sold separately
DRUM
Easy Caddy used
on a 55 gallon drum
The Easy Caddy system is our top selling and the
industry’s most versatile chemical transfer system
Pump
High-Flow Dura-Pump™
Yes; rear
TOP MOUNT
Easy Caddy secured
on top of tote
High-Flow Dura-Pump™
1” x 5ft
Discharge Hose
1” x 12ft
Nozzle
Ball valve
Camlock
Conversion
How-To
on next page
2”
Meter
Dura-Meter™ (optional)
Other
All hose clamps,
barbs and nipples
SNYDER TANK
Easy Caddy with GEM Cap
MONSANTO TANK
Easy Caddy with MTS
3
DURA-PUMP™ SPECIALTY SYSTEMS
DURA-PUMP™
EASY CADDY CONVERSION KITS
DURA-PUMP™
QUICK CADDY
For Use On MONSANTO TANK
/ Our premium highly portable
system with built-in carry
handle and rugged frame.
MTS Easy Caddy Conversion Kit DP-AK0008
2
1
3
Add MTS Kit
DP-AK0008
Remove Dura-Pump™
from Easy Caddy frame
Begin with the
Dura Easy Caddy
/ For use in multiple mounting
applications both on top of tote
and ground adaptable
DP-AK0008 installed
on Monsanto tank
WITH Meter
WITHOUT Meter
DPQM-4312 12 Volt
DPQ-4012 12 Volt
DPQM-4315 110 Volt
DPQ-4015 110 Volt
(Available in EPDM or Viton®)
Pumping System Contains
Pump
Suction Hose
1” x 5ft
Discharge Hose
1” x 12ft
Nozzle
Ball valve
Camlock
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
Tanks/Totes/Drums sold separately.
For Use On SNYDER TANK
High-Flow Dura-Pump™
2”
Meter
Dura-Meter™ (optional)
Other
All hose clamps, barbs
and nipples
GEM Cap Easy Caddy Conversion Kit DP-AK0009
DURA-PUMP™
1
2
Remove Dura-Pump™
from Easy Caddy frame
Begin with the
Dura Easy Caddy
TOP UNLOAD
3
Add GEM Cap Kit
DP-AK0009
DP-AK0009 installed
on Snyder tank
For Recirculation On IBC/TOTE
Recirculation Kit DP-AK0007
1
Begin with the
Dura Easy Caddy
2
Add Recirculation Kit
DP-AK0007
/ Top mount application with
2” NPT bung, 1” telescoping
downtube to accommodate
varying tank heights
WITH Meter
WITHOUT Meter
DPTM-4312 12 Volt
DPT-4012 12 Volt
DPTM-4315 110 Volt
DPT-4015 110 Volt
Pumping System Contains
Pump
Discharge Hose
Downtube
Nozzle
High-Flow Dura-Pump™
1” x 12ft
1” Telescoping
Ball valve
(Available in EPDM or Viton®)
Meter
Dura-Meter™ (optional)
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
Tanks/Totes/Drums sold separately.
Other
All hose clamps, barbs
and nipples
DURA-PUMP™
BOTTOM UNLOAD
DP-AK0007 installed
on IBC/TOTE
/ Configured to be hard
mounted at bottom of
tank/tote
For Use On 55 GALLON DRUM
DP-T4001 1” NPT Telescoping Downtube
Pumping System Contains
Pump
1
3
2
WITH Meter
WITHOUT Meter
DPBM-4312 12 Volt
DPB-4012 12 Volt
DPBM-4315 110 Volt
DPB-4015 110 Volt
(Available in EPDM or Viton®)
Begin with the
Dura Easy Caddy
4
Remove Dura-Pump™
from Easy Caddy frame
Add DP-T4001: 1” NPT
Telescoping Downtube
DP-T4001 installed
on 55 Gallon Drum
Must specify EPDM (product # and E) or
Viton® (product # and V) when ordering.
Tanks/Totes/Drums sold separately.
Discharge Hose
Camlock
High-Flow Dura-Pump™
1” x 12ft
2”; direct attach to tote
Motor Bracket
Yes, rear
Nozzle
Ball valve
Meter
Dura-Meter™ (optional)
Other
All hose clamps, barbs
and nipples
5