(air to air) and Single Acting

Transcription

Figure 79U/E/D Pneumatic Actuator
models 002 to 180
!@#$
valves & controls
Double Acting (air to air) and Single Acting (spring
return), 90° operation, pneumatic actuators.
General Applications
For remote control of any quarter turn
application, for example Ball, Butterfly or
Rotary Plug Valves, Dampers etc.
Features
• Compact rack and pinion design
•
•
•
•
•
•
•
•
•
•
utilising the whole piston area to
develop output torque.
Pistons with integral rack drive
reducing the number of dynamic seals,
minimising air leakage.
Double pistons nullify sideloads on the
pinion shaft, minimising bearing wear.
Springs epoxy colour coded for
additional corrosion protection and
ease of identification
Hard anodised aluminium body, with
external ESPC finish, protects against
corrosive environments including
saliferous atmospheres.
Alternative finish: electroless nickel
plating of body, pistons and end caps.
Female output drive enabling direct
mounting in certain applications,
thereby eliminating special
connections and guaranteeing correct
alignment.
Bottom entry pinion shaft.
Anti-friction piston pads ensuring no
metal to metal contact, providing a
smooth operation. Ideal for modulating
or on/off control applications.
Adjustable travel stops in both directions on
certain models (see pages 2 and 3)
Grease lubricated for life.
A †@çô INTERNATIONAL LTD. COMPANY
Accessories
Technical Data
An extensive range of standard
accessories is available for direct
mounting to Keystone actuators.
- Solenoid Valves - weatherproof,
explosionproof or intrinsically safe.
- Limit Switchboxes - weatherproof,
explosionproof or intelligent.
- Positioners - pneumatic, electropneumatic or intelligent.
- Declutchable manual override
gearbox.
- High Visibility Indicator.
- Proximity sensing - weatherproof
intrinsically safe, or intelligent.
Max. supply pressure
: 10 bar g
Rated supply pressure : 8.3 bar g
Output torque @ 5.5 bar g
Double Acting models : up to 2054 Nm
Spring Return models : up to 1414 Nm
Temperature range
: -30° to +90°C*
with standard
components.
* For higher temperature applications
other materials available on request
Tyco reserves the right to change the contents without notice
HDLDS-0006-EN-9912
models 002 to 180
Figure 79 U/E range
1
3
Double Acting and Spring Return Pneumatic
Actuators incorporating mounting flange
configurations to Keystone or ISO 5211
Standards.
4
2
8
79U - Keystone Standard
79E - ISO 5211 Standard
Travel Stops: Open and closed adjustable
travel stops are fitted on models 065, 066,
090, 091, 180, 181
7
Typical view showing models 002-036
5
6
1
8
3
4
12
2
9
1. Position indicator/dust cover
2. Precision extruded body, hard anodised
for maximum environmental protection.
3. Engineered polymer bearings give
maximum efficiency and eliminate
galvanic corrosion.
4. Piston seals.
5. Air supply to close (port B).
6. Air supply to open (port A)
7. Anti-friction piston pads.
8. Stainless steel fasteners.
9. Retaining cone.*
10. Retaining bolt.
11. Springs.*
12. End cap.
*Spring Return models only
7
10
11
5
6
Typical view showing models 002-036 (Representation only, spring colours may differ)
Materials of Construction
Part
Material
British Standard
Equivalent Standard
Body
Extruded aluminium
hard anodised & ESPC* (or ENP†)
Die cast aluminium
LM6 or LM24
anodised & ESPC* (or ENP†)
Glass filled nylon 66
Die cast aluminium
LM6 or LM24 anodised
Carbon steel (sealbond - N coated)
Spring steel
Die cast aluminium LM6
Devlon - V or equivalent
Stainless steel A2/70
Carbon Steel (Zinc Plated)
Nitrile
BS1474 6063
DIN 3.3206.51
BS1490
DIN 1725 - 230 or 226
BS1490
DIN 1725 - 230 or 226
BS970 080M40
BS5216 HS3
BS1490
C40
DIN 17223 Pti
DIN 1725
BS970 Part 3 - 304/305
DIN 267 Part 3
BS970 Part 3 - 304/305
DIN 267 Part 3
Endcaps
Piston
Pinion
(002/003)
(Other models)
(002 only)
(Other models)
Spring
Cone
Bearings
Travel Stops
Bellhof Nut
O-Rings
Fasteners
* Electro Static Powder Coating
† Electroless Nickel Plating (when this finish is specified)
page 2
models 002 to 180
Figure 79 D range
Double Acting and Spring Return Pneumatic
Actuators incorporating mounting flange
configurations to DIN and NAMUR standards.
1
2
8
79D - DIN and NAMUR Standards
7
Travel Stops: Open and closed adjustable
travel stops are fitted,
for precise travel limitation.
(Except size 002)
1. Position indicator/dust cover
2. Precision extruded body, hard anodised
for maximum environmental protection.
3. Engineered polymer bearings give
maximum efficiency and eliminate
galvanic corrosion
4. Piston seals.
5. Travel stop bolt - open.
6. Travel stop bolt - close.
7. Anti-friction piston pads.
8. Stainless steel fasteners.
9. Retaining cone.*
10. Retaining bolt.
11. Spring.*
12. End cap.
5
6
(Model 002 is without travel stops)
1
8
4
3
2
9
*Spring Return models only
12
10
7
5
11
6
(Model 002 is without travel stops)
Materials of Construction
Part
Material
British Standard
Equivalent Standard
Body
Extruded aluminium
hard anodised & ESPC* (or ENP†)
Die cast aluminium
LM6 or LM24
anodised & ESPC* (or ENP†)
Die cast aluminium
LM6 or LM24 anodised
Carbon steel (sealbond - N coated)
Spring steel
Die cast aluminium LM6
Devlon - V or equivalent
Carbon Steel (Zinc Plated)
Nitrile
BS1474 6063
DIN 3.3206.51
BS1490
DIN 1725 - 230 or 226
BS1490
DIN 1725 - 230 or 226
BS970 080M40
BS5216 HS3
BS1490
C40
DIN 17223 Pti
DIN 1725
BS970 Part 3 - 304/305
DIN 267 Part 3
BS970 Part 3 - 304/305
DIN 267 Part 3
Endcaps
Piston
Pinion
(002/003)
(Other models)
(002 only)
(Other models)
Spring
Cone
Bearings
Travel Stops
Bellhof Nut
O-Rings
Fasteners
* Electro Static Powder Coating
† Electroless Nickel Plating (when this finish is specified)
page 3
models 002 to 180
Line drawings fig. 79U/E - models 002 to 036
Notes
1. A comprehensive range of double D and
square adaptors are available.
2. Actuators can be mounted to valves in line
or transversely.
3. Abbreviations - SB - small bore / LB large bore.
4. Mounting codes CAG/CAH/XAB are only
available on this model with the use of a
19 mm thick mounting plate.
5. F07 mounting is only available on this
model with the use of a 12mm thick
mounting plate.
6. Mounting dimension at base of model 180
is 190mm. (See end view detail below).
7. 79 Actuators can be supplied without the
locating spigot (ØH x J) and Namur
adaptor (See page 10).
mounting plate.
9. Drive details obtained using appropriate
adaptors.
10.Maximum distance the travel stop should
extend when setting the travel range of the
actuator.
A
B
C
E
'B'
'A'
D
Line drawings fig. 79D - models 002 to 180
Note: Fig 79D - Model 002 does
not have travel stops
Travel Stop Bolting - ‘F’
close
open
A
C
B
E
End View Model 180
J
G
'B'
'A'
øH
D
Max.
recommended
Line drawings fig. 79U/E - models 065, 090 and 180
Travel Stop Bolting - M16/M20 (model 180)
close
open
A
B
C
E
'B'
35 Max.
recommended
'A'
D
page 4
models 002 to 180
Actuator dimensions Fig. 79U (with Keystone standard mounting)
Bottom Shaft Hole
Type
A
B
C
D
E
J
K
Keystone Mounting
Mass
Keyway
Compatibility Code
Kg.
-
XAD
1.2
4.8
6.4
6.4
6.4
6.4
6.4
8.0
9.5
12.7
12.7
12.7
XAD/BAD
BAD
BAD
BAD/CAE
BAD/CAE
CAE/XAA/CAF
CAG
CAH
XAG/DAJ/CAG
XAG/DAJ/CAG(4)
DAK/CAH(4)/XAB(4)
1.6
3.2
5.4
10.0
13.0
19.0
19.0
29.0
29.0
45.0
45.0
(see table on page 9)
79U-002
117
81
90
80
54
79U-003
79U-006
79U-012
79U-024
79U-036
79U-065
79U-066
79U-090
79U-091
79U-180
79U-181
140
167
181
233
273
325
325
409
409
481
481
81
103
127
150
175
217
217
217
217
268
268
90
112
136
159
184
226
226
226
226
277
277
80
93
112
136
152
203
203
203
203
250
250
54
57
82
84
88
114
114
114
114
130
130
9.5 A/F(9)
9.5 x 6.4 A/F(9)
20.7 Dia. x 21.8
25.5 Dia. x 27.0
25.5 Dia. x 27.0
28.6 Dia. x 31.7
28.6 Dia. x 31.7
28.6 Dia. x 31.7
35.0 Dia. x 38.5
41.3 Dia. x 46.0
47.6 Dia. x 52.3
47.6 Dia. x 52.3
57.2 Dia. x 61.9
See notes on previous page
Actuator dimensions Fig. 79E (with ISO 5211 mounting)
Bottom Shaft Hole
Type
79E-002
79E-003
79E-006
79E-012
79E-024
79E-036
79E-065
79E-090
79E-180
A
B
C
D
E
117
140
167
181
233
273
325
409
481
81
81
103
127
150
175
217
217
268
90
90
112
136
159
184
226
226
277
80
80
93
112
136
152
203
203
250
54
54
57
82
84
88
114
114
130
J
Mounting
K
16 x 11 A/F
20.7 Dia. x 21.8
25.5 Dia. x 27.0
25.5 Dia. x 27.0
25.0 Dia. x 18 A/F
30.0 Dia. x 22 A/F
35.0 Dia. x 38.5
50.0 Dia. x 54.0
50.0 Dia. x 54.0
Mass
Keyway
Flange Type
Kg.
4.8
6.4
6.4
10.0
14.0
14.0
F05
F05/ F07
F05/F07
F07
F07/F12
F07(5) /F12
F12
F12/F16
F12(8) /F16 (6)
1.2
1.6
3.2
5.4
10.0
13.0
19.0
29.0
45.0
Actuator dimensions Fig. 79D (with DIN 3337 mounting)
Type
79D-002
79D-003
79D-006
79D-012
79D-024
79D-036
79D-065
79D-090
79D-180
A
B
C
D
E
F
G
H(7)
J(7)
117
146
173
188
242
277
325
409
481
81
81
103
127
150
175
217
217
268
90
90
112
136
159
184
226
226
277
80
80
93
112
136
152
203
203
250
54
54
57
82
84
88
114
114
130
M6
M8
M8
M12
M12
M16
M16
M20
14
18
20
23
23
35
35
40
35
35
55
70
70
85
85
100
130
3
3
3
3
3
3
3
4
5
Bottom Shaft Hole
Mounting
M
Flange Type
14
14
17
22
22
27
27
36
46
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
45°
45°
45°
45°
45°
45°
45°
45°
45°
Mass
Kg.
F05
1.2
F05
1.6
F07
3.2
F10
5.4
F10
10.0
F12
13.0
F12
19.0
F14
29.0
F16
45.0
page 5
models 002 to 180
Line drawings fig. 79U/E - models 002S to 036S
Notes
1. A comprehensive range of double D and
square adaptors is available.
2. Actuators can be mounted to valves in line
or transversely.
3. Abbreviations - SB - small bore / LB large bore.
4. Mounting codes CAG/CAH/XAB are only
available on this model with the use of a
19 mm thick mounting plate.
mounting plate.
6. Mounting dimension at base of model 180
is 190mm.(See end view detail below).
7. 79 Actuators can be supplied without the
locating spigot (ØH x J) and Namur
adaptor (See page 10).
mounting plate.
9. Drive details obtained using appropriate
adaptors.
10.Maximum distance the travel stop should
extend when setting the travel range of the
actuator.
A
C
B
E
'B'
'A'
D
Line drawings fig. 79D - models 002S to 180S
Note: Fig 79D - Model 002 does not
have travel stops
Travel Stop Bolting - ‘F’
close
open
A
End View Model 180
C
B
E
J
G
'B'
'A'
øH
See Note: (7)
D
Max.
Line drawings fig. 79U/E - models 065S, 090S and 180S
Travel Stop Bolting M16/M20
close
A
C
B
E
'B'
G
Max.
open
'A'
D
page 6
models 002 to 180
Actuator dimensions fig. 79U (with Keystone standard mounting)
Bottom Shaft Hole
Type
A
B
C
D
E
J
K
Keystone Mounting
Mass
Keyway
Compatibility Code
Kg.
-
XAD
1.6
4.8
6.4
6.4
6.4
6.4
6.4
8.0
9.5
12.7
12.7
12.7
XAD/BAD
BAD
BAD
BAD/CAE
BAD/CAE
CAE/XAA/CAF
CAG
CAH
XAG/DAJ/CAG
XAG/DAJ/CAG(4)
DAK/CAH(4)/XAB(4)
2.0
4.0
7.5
14.7
19.5
34.0
34.0
45.0
45.0
72.0
72.0
(see table on page 9)
79U-002S
186
81
90
80
54
79U-003S
79U-006S
79U-012S
79U-024S
79U-036S
79U-065S
79U-066S
79U-090S
79U-091S
79U-180S
79U-181S
216
257
282
351
422
500
500
584
584
694
694
81
103
127
150
175
217
217
217
217
268
268
90
112
136
159
184
226
226
226
226
277
277
80
93
112
136
152
203
203
203
203
250
250
54
57
82
84
88
114
114
114
114
130
130
9.5 A/F(9)
9.5 x 6.4 A/F(9)
20.7 Dia. x 21.8
25.5 Dia. x 27.0
25.5 Dia. x 27.0
28.6 Dia. x 31.7
28.6 Dia. x 31.7
28.6 Dia. x 31.7
35.0 Dia. x 38.5
41.3 Dia. x 46.0
47.6 Dia. x 52.3
47.6 Dia. x 52.3
57.2 Dia. x 61.9
Actuator dimensions fig. 79E (with ISO 5211 mounting)
Bottom Shaft Hole
Type
79E-002S
79E-003S
79E-006S
79E-012S
79E-024S
79E-036S
79E-065S
79E-090S
79E-180S
A
B
C
D
E
186
216
257
282
351
422
500
584
694
81
81
103
127
150
175
217
217
286
90
90
112
136
159
184
226
226
277
80
80
93
112
136
152
203
203
250
54
54
57
82
84
88
114
114
130
J
Mounting
K
Keyway
16 x 11 A/F
20.7 Dia. x 21.8
25.5 Dia. x 27.0
25.5 Dia. x 27.0
25.0 Dia. x 18 A/F
30.0 Dia. x 22 A/F
35.0 Dia. x 38.5
50.0 Dia. x 54.0
50.0 Dia. x 54.0
4.8
6.4
6.4
10.0
14.0
14.0
Flange Type
Mass
Kg.
F05
1.6
F05/F07
2.0
F05/F07
4.0
F07
7.5
F07/F12
14.7
F07 (5) /F12
19.5
F12
34.0
F12/F16
45.0
F12(8) /F16(6)
72.0
Actuator dimensions Fig. 79D range
Type
79D-002S
79D-003S
79D-006S
79D-012S
79D-024S
79D-036S
79D-065S
79D-090S
79D-180S
A
B
C
D
E
F
G
H(7)
J(7)
186
216
263
289
360
427
500
584
694
81
81
103
127
150
175
217
217
268
90
90
112
136
159
184
226
226
277
80
80
93
112
136
152
203
203
250
54
54
57
82
84
88
114
114
130
M6
M8
M8
M12
M12
M16
M16
M20
14
18
20
23
23
35
35
40
35
35
55
70
70
85
85
100
130
3
3
3
3
3
3
3
4
5
Bottom Shaft Hole
Mounting
M
Flange Type
14
14
17
22
22
27
27
36
46
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
45°
45°
45°
45°
45°
45°
45°
45°
45°
Mass
Kg.
F05
1.6
F05
2.0
F07
4.0
F10
7.5
F10
14.7
F12
19.5
F12
34.0
F14
45.0
F16
72.0
page 7
models 002 to 180
Actuator pinion top drive details
Fig. 79U/E/D - all models - Double Acting or Spring Return
Figure 79U (Keystone)
Model
002
003
006
012
024
036
065/066
090/091
180/181
J
16
20.7
25.5
25.5
28.6
28.6
28.6
28.6
28.6
K
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
x
x
x
x
x
x
x
x
x
Figure 79E (ISO 5211)
Keyway
11 A/F
21.8
27.0
27.0
31.7
31.7
31.7
31.7
31.7
4.8
6.4
6.4
6.4
6.4
6.4
6.4
6.4
J
16
20.7
25.5
25.5
28.6
28.6
28.6
28.6
28.6
K
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
Dia.
x
x
x
x
x
x
x
x
x
11 A/F
21.8
27.0
27.0
31.7
31.7
31.7
31.7
31.7
Figure 79D
Keyway
M
4.8
6.4
6.4
6.4
6.4
6.4
6.4
6.4
16 Dia. x 11 A/F
16 Dia. x 11 A/F
17 Sq.@ 45°
22 Sq.@ 45°
22 Sq.@ 45°
27 Sq.@ 45°
28.6 Dia. x 31.7 x 6.4 Keyway
28.6 Dia. x 31.7 x 6.4 Keyway
28.6 Dia. x 31.7 x 6.4 Keyway
Note: A comprehensive range of adaptors is available, where required, to convert all pinion top drive details to the standard Keystone top mounted accessory drive of
16 x 11 A/F
Actuator pinion bottom drive details
Mounting Flanges
Mounting Flanges
Figure 79U (Keystone)
Bottom Shaft Hole
Figure 79E (ISO 5211)
Figure 79D
Bottom Shaft Hole
Bottom Shaft Hole
Model
002
J
K
9.5 Dia. A/F x 6.4 A/F(9)
Keyway
-
J
K
16 Dia. x 11 A/F
Keyway
-
M
14 Sq.@ 45°
003
006
012
024
036
065
066
090
091
180
181
14.3 Dia. A/F x 9.5 A/F(9)
20.7 Dia. x 21.8
25.5 Dia. x 27.0
25.5 Dia. x 27.0
28.6 Dia. x 31.7
28.6 Dia. x 31.7
28.6 Dia. x 31.7
35.0 Dia. x 38.5
41.3 Dia. x 46.0
47.6 Dia. x 52.3
47.6 Dia. x 52.3
57.2 Dia. x 61.9
4.8
6.4
6.4
6.4
6.4
6.4
8.0
9.5
12.7
12.7
12.7
20.7 Dia. x 21.8
25.5 Dia. x 27.0
25.5 Dia. x 27.0
25.0 Dia. x 18 A/F
30.0 Dia. x 22 A/F
35.0 Dia. x 38.5
4.8
6.4
6.4
10.0
14
17
22
22
27
27
50.0 Dia. x 54.0
14.0
36 Sq.@ 45°
50.0 Dia. x 54.0
14.0
46 Sq.@ 45°
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
Sq.@
45°
45°
45°
45°
45°
45°
Note: A comprehensive range of adaptors for 79U/E is available to convert all pinion bottom drive details to suit all Keystone valve stems.
page 8
models 002 to 180
Notes
1. Solenoid mounting dual drilled to suit
Keystone standard and Namur standard.
Actuator body drilling for solenoid mounting
Port Hole Drillings - Fig. 79U/E (all models)
50.8
24.0
(See note 1)
3. On Model 180 Drillings are aligned vertically
(not horizontally, as shown) with Port A at
top.
ISO 228/- G 1/4”
BSP x 12 Dp.
M5 x 8 Dp. Fixings
Port Hole Drillings - Fig. 79D (all models)
24.0
(See note 2)
‘B’
‘A’
32.0
Diagram note:
air port hole ‘B’ - CLOSED
air port hole ‘A’ - OPEN
‘A’
32.0
‘B’
2. Solenoid mounting drilled to suit Namur
standard.
34.0
Diagram note:
air port hole ‘B’ - CLOSED
air port hole ‘A’ - OPEN
ISO 228/- G 1/4”
BSP x 12 Dp.
M5 x 8 Dp. Fixings
4. On sizes 002 and 003 an adaptor plate is
required (as shown) when a remote
solenoid valve is utilised.
Adaptor Plate
(see note 4)
Actuator Body top drillings for accessory mounting
Fig. 79U/E/D (models 065, 090 ,180)
M5 x 8 Dp. Fixings
M5 x 8 Dp. Fixings
J
30
80.0
93.5
93.5
130
Fixing Holes as above
Fig. 79U/E (models 003 to 036)
(for model 002 see note 6)
M5 x 8 Dp. Fixings
K
J
M
41.1
Fig. 79D (models 002/003)
30
7. Dimensions M, K and J refer to Top Drive
Details shown at top of page 8.
41.1
K
M
41.1
6. 79U/E/D Model 002 has NAMUR (VDI/VDE
3845) fixings only (80 x 30).
An adaptor plate is available for conversion
to Keystone Standard mounting details
Fig. 79D (models 006 to 036)
30
5. Top face dual drilled to suit Keystone and
NAMUR (VDI/VDE 3845) Standard
accessory mountings.
80.0
93.5
page 9
models 002 to 180
Mounting flange dimension details
Notes
Keystone Mounting Compatibility Codes
PCD
XAD
BAD
CAE
CAF
CAG
CAH
XAA
XAB
DAJ
DAK
XAG
44.45
82.6
127.0
127.0
127.0
127.0
127.0
127.0
165.0
165.0
165.0
4
4
4
4
4
4
4
4
4
4
4
ISO Mounting Types
F05
F07
F10
F12
F14
F16
PCD
50.0
70.0
102.0
125.0
140.0
165.0
Bolt Holes
4 x M6 x 10 Dp.
4 x M8 x 13 Dp.
4 x M10 x 15 Dp.
4 x M12 x 19 Dp.
4 x M16 x 25 Dp.
4 x M20 x 25 Dp.
Refer to dimension tables on pages 5/7 to
identify the relevant mounting flange
configuration.
Bolt Holes
x
x
x
x
x
x
x
x
x
x
x
M6
M10
M12
M12
M12
M12
M12
M12
M20
M20
M20
x 10 Dp.
x 13 Dp.
x 16 Dp.
x 16 Dp.
x 19 Dp.
x 19 Dp.
x 16 Dp.
x 19 Dp.
x 25 Dp.
x 25 Dp.
x 25 Dp.
1. The compatability codes also refer to the
bore and key of the pinion drive in order to
accomodate Keystone valve shaft and
topworks details
Notes
Bi-directional travel stops
7° Undertravel
0° Overtravel
5° Overtravel
Actuator Body
Actuator Body
Camshaft
Actuator Body
Open adjustment bolt
Close adjustment bolt
1. Adjustable travel stops are fitted as
standard to the following models:
79U/E - models 065, 090 and 180
79D
- models 003, 006, 012, 024, 036,
065, 066, 090, 091, 180 and 181
2. Adjustable stops on the centre of the body
provide the flexibility of accurate valve
rotational positioning at the end of the
‘open’ and ‘close’ stroke.
3. The total travel of 100 degrees allows for
end of travel adjustment of 5 degrees over /
7 degrees under at both open and close
positions.
4. Travel stops must not be used for manual
override purposes.
5. When Namur adaptor is not supplied, the
actuator is designated Fig 79L.
All views illustrated in the open position
Namur accessory adaptor details (Fig. 79D)
See note 5
M6 x 12 Dp.
4.0
4.0
4.0
30.0
ø16.0
30.0
ø16.0
4.0
M6 x 12 Dp.
11.0 A/F
11.0 A/F
Pneumatic Actuator
Pneumatic Actuator
Not on model 002
Models 065/180
Models 002 to 036
page 10
models 002 to 180
Notes
1. Operating times under no load, for air
pressures of 5.5 barg (80psi).
(Times based on actual measurements)
2. All times obtained using a standard direct
mounted Keystone 791B, 5/2(DA) and
3/2(SA) solenoid valve with a CV of 0.97
and no exhaust restrictors, with 8.0mm
diameter air connections and piping.
3. Total time is defined as time required from
energising/de-energising Solenoid Valve to
completion of 90° stroke.
4. Times for Single Acting Actuators are for
Fail Close.
Actuator operating times (seconds)
Double Acting models
Moving Time
Total Time
Actuator
Opening
Closing
Opening
Closing
002
003
006
012
024
036
065/066
090/091
180/181
0.050
0.050
0.075
0.120
0.220
0.300
0.550
0.700
1.600
0.050
0.050
0.080
0.130
0.250
0.350
0.600
0.900
1.700
0.060
0.060
0.080
0.160
0.420
0.550
1.100
1.500
2.800
0.060
0.060
0.090
0.200
0.450
0.600
1.200
1.700
2.850
Spring Return models
Moving Time
Actuator
002S
003S
006S
012S
024S
036S
065S/066S
090S/091S
180S/181S
5. Piston displacement is the total volume of
pressurised air after the actuator has
completed its stroke.
Closing
Opening
Closing
0.070
0.070
0.070
0.140
0.750
0.750
1.600
1.900
1.500
0.070
0.070
0.070
0.120
0.250
0.300
0.600
0.700
1.400
0.080
0.080
0.130
0.220
1.000
1.050
2.300
2.600
3.600
0.080
0.080
0.080
0.200
0.350
0.500
0.800
1.200
2.300
Actuator piston displacement (in litres)
Actuator
Open
Close
(Double Acting and Spring Return)
(Double Acting only)
0.137
0.187
0.346
0.629
1.290
1.945
3.523
4.779
9.690
0.097
0.123
0.234
0.455
0.912
1.363
2.635
3.347
6.700
002
003
006
012
024
036
065/066
090/091
180/181
For optimum performance on Ball Valves
utilise 70/90 psi springs when a 80/100
psi air supply is specified.
Total Time
Opening
Standard spring colour codes
Spring Rating
Models 002S to 180S
40 psi - 2.8 bar
50 psi - 3.5 bar
60 psi - 4.2 bar
70 psi - 4.8 bar
80 psi - 5.5 bar
90 psi - 6.2 bar
100 psi - 6.9 bar
* Nested (double) springs
Light Blue (both ends)
Light Blue (one end)
White (both ends)
Light Blue/Dark Blue*
Light Blue/Dark Blue* (both ends)
Light Blue/White*
Light Blue/White* (both ends)
White (other end)
White (other end)
Light Blue/Dark Blue* (other end)
page 11
models 002 to 180
Output torques for double acting actuators in lb. in., air supply in psi
Type
002
003
006
012
024
036
065/066
090/091
180/181
40
50
60
80
100
120
122
156
298
580
1159
1732
3347
4252
8736
155
198
379
737
1472
2200
4252
5401
11097
188
240
459
893
1785
2668
5157
6550
13458
254
325
621
1207
2411
3604
6966
8848
18180
320
409
782
1520
3038
4540
8775
11146
22902
386
493
943
1834
3664
5476
10585
13444
27624
Output torques for double acting actuators in Nm., air supply in psi (bar)
Type
002
003
006
012
024
036
065/066
090/091
180/181
40
50
60
80
100
120
(2.7)
(3.4)
(4.1)
(5.5)
(6.9)
(8.3)
14
18
34
66
131
196
378
480
987
18
22
43
83
166
249
480
610
1254
21
27
52
101
202
301
583
740
1521
29
37
70
136
272
407
787
1000
2054
36
46
88
172
343
513
992
1259
2588
44
56
107
207
414
619
1196
1519
3121
Output torques for double acting actuators in Nm., air supply in bar
Type
002
003
006
012
024
036
065/066
090/091
180/181
3
4
5
6
15
19
37
72
143
214
414
526
1080
20
26
51
99
197
294
569
722
1484
26
33
63
123
246
368
710
902
1854
31
40
76
149
297
444
859
1091
2241
7
37
47
89
175
348
520
1006
1277
2626
8
42
54
103
200
400
598
1155
1467
3015
page 12
models 002 to 180
Output torques for single acting actuators in Nm., air supply in bar
Actuator Spring
Mode
002S
2.7
Type(bar) start
2.7
3.4
4.1
4.8
5.5
6.2
6.9
003S
2.7
3.4
4.1
4.8
5.5
6.2
6.9
006S
2.7
3.4
4.1
4.8
5.5
6.2
6.9
012S
2.7
3.4
4.1
4.8
5.5
6.2
6.9
024S
2.7
3.4
4.1
4.8
5.5
6.2
6.9
036S
2.7
3.4
4.1
4.8
5.5
6.2
6.9
065S/066S 2.7
3.4
4.1
4.8
5.5
6.2
6.9
090S/091S 2.7
3.4
4.1
4.8
5.5
6.2
6.9
180S/181S 2.7
3.4
4.1
4.8
5.5
6.2
6.9
3.4
4.1
4.8
5.5
6.2
6.9
end
start
end
start
end
start
end
start
end
start
end
7
3
11
9
7
5
15
13
11
11
8
6
18
17
15
13
15
12
10
7
22
20
19
17
16
18
16
13
11
8
26
24
23
21
19
18
22
20
17
14
12
9
9
4
14
12
9
6
19
17
14
14
11
7
23
21
19
17
19
15
12
9
28
26
24
22
20
23
20
17
14
10
33
31
29
27
25
22
28
25
22
18
15
12
17
8
26
22
17
11
35
31
27
27
20
14
44
40
36
32
36
29
23
17
53
49
45
41
37
45
38
32
26
19
62
58
54
50
46
42
54
47
41
35
28
22
31
16
49
41
33
21
67
58
50
51
39
26
84
76
67
59
69
56
44
31
102
94
85
77
68
86
74
61
49
36
120
111
103
94
86
77
104
92
79
67
54
42
66
32
101
85
67
42
137
120
104
103
78
53
172
156
139
123
138
113
88
64
207
191
175
158
142
173
149
124
99
74
243
226
210
194
178
161
209
184
159
134
110
85
99
50
151
127
103
66
204
180
156
156
119
83
257
233
209
184
209
172
136
99
310
286
262
237
213
261
225
189
152
116
363
339
314
290
266
242
314
278
242
205
169
132
190
92
292
245
194
122
394
347
300
296
225
153
497
450
403
356
398
327
255
184
599
552
505
458
411
501
429
357
286
214
701
654
607
560
513
466
603
531
460
388
317
245
241
117
371
311
246
156
501
441
382
376
285
194
631
571
511
452
506
415
324
233
761
701
641
581
522
636
545
454
363
272
890
831
771
711
6 51
592
766
675
584
493
402
311
496
240
763
640
506
320
1029
907
784
773
586
400
1296
1173
1051
928
1040
853
666
480
1563
1440
1317
1195
1072
1307
1120
933
746
559
1830
1707
1584
1461
1339
1216
1574
1387
1200
1013
826
639
start
30
28
26
25
23
21
20
38
36
34
31
29
27
25
72
67
63
59
55
51
47
138
129
121
112
103
95
86
278
262
246
229
213
197
180
416
392
367
343
319
294
270
803
756
709
662
615
568
521
1020
961
901
841
781
722
662
2097
1974
1851
1728
1606
1483
1360
8.3
end
26
23
21
18
16
13
10
33
30
26
23
20
17
13
63
57
50
44
38
31
25
122
109
97
84
72
59
47
244
219
195
170
145
120
95
367
331
294
258
222
185
149
705
634
562
490
419
347
276
896
805
714
623
532
441
350
1840
1653
1467
1280
1093
906
719
start
37
35
34
32
30
29
27
47
45
43
41
39
37
35
90
86
81
77
73
69
65
173
164
156
147
139
130
122
349
333
316
300
284
267
251
522
497
473
449
425
400
376
1008
961
914
867
820
773
725
1280
1220
1160
1101
1041
981
921
2630
2507
2385
2262
2139
2016
1894
Spring only
end
33
31
28
26
23
20
18
43
39
36
33
29
26
23
81
75
68
62
56
49
43
157
145
132
120
107
95
82
315
290
265
241
216
191
166
473
437
400
364
327
291
254
910
838
766
695
623
552
480
1155
1064
973
882
792
701
610
2374
2187
2000
1813
1627
1440
1253
start
9
12
14
17
20
22
25
12
15
18
22
25
28
32
23
29
35
42
48
54
61
45
57
70
82
95
107
119
88
113
138
163
188
212
237
130
166
203
239
276
312
348
256
327
399
470
542
614
685
325
416
507
598
689
779
870
667
854
1041
1228
1414
1601
1788
end
5
7
9
10
12
14
15
7
9
11
13
15
18
20
14
18
22
27
31
35
39
29
37
46
54
63
72
80
55
71
87
103
120
136
152
81
106
130
154
178
203
227
158
205
252
299
346
393
440
200
260
320
379
439
499
559
411
534
656
779
902
1025
1147
page 13
Keystone Figure 79U/E/D Pneumatic Actuator
models 002 to 180
Output torques for single acting actuators in lb. in., air supply in psi
Actuator Spring
Mode
002S
Type(psi) start
40
64
50
60
70
80
90
100
003S
40
81
50
60
70
80
90
100
006S
40 150
50
60
70
80
90
100
012S
40 277
50
60
70
80
90
100
024S
40 582
50
60
70
80
90
100
036S
40 872
50
60
70
80
90
100
065S/066S 40 1682
50
60
70
80
90
100
090S/091S 40 2136
50
60
70
80
90
100
180S/181S 40 4389
50
60
70
80
90
100
40
50
60
70
80
start
end
start
100
start
end
start
end
start
31
97
82
64
41
130
115
100
97
74
51
163
148
134
119
130
107
84
61
196
181
167
152
137
163
140
117
94
71
229
214
200
185
170
156
196
173
150
127
104
82
39
123
105
81
52
166
147
128
124
94
65
208
189
170
152
166
137
107
78
250
231
213
194
175
208
179
150
120
91
292
273
255
236
217
199
250
221
192
163
133
104
73
231
194
154
98
311
274
237
235
178
122
392
355
318
281
315
259
203
147
472
435
398
361
324
396
340
283
227
171
553
516
479
442
405
368
476
420
364
308
252
195
138
434
359
295
184
591
515
440
451
341
230
748
672
596
521
608
498
387
277
904
829
753
678
602
765
654
544
433
323
1061
985
910
834
759
683
921
811
701
590
480
369
282
895
751
595
376
1209
1064
920
908
689
470
1522
1378
1233
1089
1221
1002
783
563
1835
1691
1547
1403
1258
1534
1315
1096
877
657
2148
2004
1860
1716
1572
2138
1847
1628
1409
1190
970
1170
442
1340
1125
910
588
1808
1593
1379
1378
1056
734
2276
2061
1847
1632
1846
1524
1201
879
2744
2529
2315
2100
1885
2314
1992
1669
1347
1025
3212
2997
2783
2568
2353
2138
2782
2460
2137
1815
1493
1170
813
2586
2170
1717
1084
3491
3075
2658
2622
1988
1355
4395
3979
3563
3146
3526
2893
2259
1626
5300
4884
4467
4051
4617
4431
3797
3164
2530
2409
6205
5788
5372
4956
5766
5237
5336
4702
4068
3435
3558
2753
1032
3285
2756
2181
1376
4434
3905
3376
3330
2525
1721
5583
5054
4525
3997
4479
3674
2870
2065
6732
6203
5674
5145
4617
5628
4823
4019
3214
2409
7881
7352
6823
6294
5766
5237
6777
5972
5168
4363
3558
2753
2122
6750
5664
4482
2829
9111
8025
6938
6843 11472
5190 10385
3537 9299
8213
9204
7551
5897
4244
end
90
end
end
13833 11565 16193 13926
12746 9911 15107 12272
11660 8258 14021 10619
10573 6605 12934 8966
9487 4952 11848 7312
10762 5659
page 14
start
262
247
233
218
203
189
174
334
316
297
278
260
241
222
634
597
560
523
486
449
412
1218
1142
1067
991
915
840
764
2461
2317
2173
2029
1885
2606
2391
3680
3465
3251
3036
2821
2606
2391
7109
6693
6277
5860
6915
6386
5857
9030
8501
7972
7443
6915
6386
5857
18554
17468
16381
15295
14209
13122
12036
120
end
229
206
183
160
138
115
92
292
263
234
205
176
146
117
557
501
445
388
332
276
220
1078
968
857
747
636
526
415
2161
1941
1722
1503
1284
1638
1316
3250
2928
2605
2283
1961
1638
1316
6240
5607
4973
4339
4707
3902
3098
7926
7121
6317
5512
4707
3902
3098
16286
14633
12980
11326
9673
8020
6367
start
328
313
299
284
269
255
240
419
400
381
363
344
325
307
795
758
721
684
647
610
573
1531
1456
1380
1304
1229
1153
1078
3087
2943
2799
2655
2511
3542
3327
4616
4401
4187
3972
3757
3542
3327
8918
8502
8086
7669
9213
8664
8155
11328
10799
10270
9741
9213
8664
8155
23276
22189
21103
20017
18930
17844
16758
Spring only
end
295
272
249
226
204
181
158
377
347
318
289
260
231
202
718
662
606
549
493
437
381
1392
1281
1171
1060
950
839
729
2787
2568
2348
2129
1910
2574
2252
4186
3864
3541
3219
2897
2574
2252
8049
7416
6782
6149
7005
6200
5395
10224
9419
8614
7810
7005
6200
5395
21008
19355
17701
16048
14395
12741
11008
start
end
81
49
104
63
127
78
150
92
173
107
196
122
219
136
104
62
133
81
162
99
192
118
221
137
250
155
279
174
201
124
257
161
313
198
369
235
425
272
482
309
538
346
395
255
505
331
616
406
726
482
837
558
947
633
1058
709
783
462
1002
627
1221
771
1441
915
1660 1059
2761 1793
3083 2008
1149
719
1471
934
1794 1149
2116 1363
2438 1578
2761 1793
3083 2008
2263 1394
2897 1810
3530 2227
4164 2643
6093 3886
6898 4414
7703 4943
2874 1770
3679 2299
4484 2828
5289 3357
6093 3886
6898 4414
7703 4943
5905 3637
7558 4724
9212 5810
10865 6896
12518 7983
14171 9069
15825 10155
models 002 to 180
Output torques for single acting actuators in Nm., air supply in bar
Actuator
Spring
3
4
5
6
7
Mode
Type(b ar)
start
end
start
end
start
end
start
end
002S
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
2.7
3.4
4.1
4.8
5.5
6.2
6.9
9
5
15
13
11
11
8
6
19
18
16
14
13
16
13
10
8
5
25
23
21
20
18
16
21
18
16
13
11
8
11
9
6
3
19
17
14
14
11
7
25
23
20
18
16
20
17
13
10
7
20
16
11
5
35
31
27
27
20
14
47
42
38
34
30
38
32
25
19
12
38
29
22
9
67
58
50
51
39
26
89
80
72
63
55
73
61
48
36
23
78
62
44
19
137
120
104
103
78
53
181
165
148
132
116
147
122
97
73
48
117
93
68
32
204
180
156
156
119
83
270
246
222
198
173
222
185
149
113
76
226
179
128
56
394
347
300
296
225
153
522
475
428
381
334
424
352
281
209
138
287
227
162
71
501
441
382
376
285
194
663
604
544
484
424
539
448
357
266
175
589
467
333
146
1029
567
784
773
586
400
1363
1240
1117
995
872
1107
920
733
546
359
32
29
27
25
23
21
19
60
56
51
47
43
39
35
115
106
97
89
80
72
63
232
216
200
183
167
151
134
347
323
299
274
250
226
201
670
623
576
529
482
435
388
852
792
732
672
613
553
493
1750
1627
1504
1381
1259
1136
1073
27
24
20
17
14
10
7
51
45
38
32
26
19
13
99
86
74
61
49
36
24
198
173
149
124
99
74
49
299
262
226
189
153
116
80
572
501
429
357
286
214
143
727
636
545
454
363
272
181
1493
1307
1120
933
746
559
373
003S
006S
012S
024S
036S
065S/066S
090S/091S
180S/181S
start
30
28
26
25
23
21
20
38
36
34
31
29
27
25
72
67
63
59
55
51
47
138
129
121
112
103
95
86
278
262
246
229
213
197
180
416
392
367
343
319
294
270
803
756
709
662
615
568
521
1020
961
901
841
781
722
662
2097
1974
1851
1728
1606
1483
1360
8
end
26
23
21
18
16
13
10
33
30
26
23
20
17
13
63
57
50
44
38
31
25
122
109
97
84
72
59
47
244
219
195
170
145
120
95
367
331
294
258
222
185
149
705
634
562
490
419
347
276
896
805
714
623
532
441
350
1840
1653
1467
1280
1093
906
719
start
36
34
32
31
29
27
26
45
43
41
39
37
35
33
86
82
78
74
69
65
61
166
157
149
140
132
123
115
335
318
302
286
270
253
237
500
476
452
428
403
379
355
967
920
873
826
779
732
685
1228
1168
1109
1049
989
929
870
2523
2401
2278
2155
2032
1910
1787
Spring only
end
32
29
27
24
22
19
16
41
37
34
31
27
24
21
77
71
65
58
52
46
39
150
138
125
113
100
88
75
301
276
251
226
202
177
152
452
415
379
343
306
270
233
869
797
725
654
582
511
439
1103
1012
921
831
740
649
558
2267
2080
1893
1707
1520
1333
1146
start
9
12
14
17
20
22
25
12
15
18
22
25
28
32
23
29
35
42
48
54
61
45
57
70
82
95
107
119
88
113
138
163
188
212
237
130
166
203
239
276
312
348
256
327
399
470
542
614
685
325
416
507
598
689
779
870
667
854
1041
1228
1414
1601
1788
end
5
7
9
10
12
14
15
7
9
11
13
15
18
20
14
18
22
27
31
35
39
29
37
46
54
63
72
80
55
71
87
103
120
136
152
81
106
130
154
178
203
227
158
205
252
299
346
393
440
200
260
320
379
439
499
559
411
534
656
779
902
1025
1147
page 15
models 002 to 180
page 16

(air to air) and Single Acting

Transcription

Similar documents

IW Quarter-turn Gear Series

Rotork IW