ReddotSignal Product Brochure

Transcription

Every year, many accidents occur all over the world because of safety troubles. Injury and
wrongful death expectancy in industry working environment is far high than after-working
environment. Since 1990, we kept focusing on people working under hazardous environments, from harbor to mining field, metallurgy plant, tall building, high-way, and off-shore
site, etc. Our engineers go to all of above work sites to develop more reliable industry
warning & communication products.
About us
Shanghai Reddot was started in 2010 by a group of young people concentrate on signal
lighting designing and manufacturing. The company's first product is Aviation Obstruction
Light. After the Obstruction Light found its international market, the company will design
more products to meet needs of the market.
Our goal
Reddot focus on R&D and dedicate to provide state-of-the-art product for our customer.
Our advantagep
Deep understanding on technologies that our product require Absolutely following rules &
regulations in the industry we are serving
Our value
•
•
•
•
Dedication
Candor
Eager for action
Continuous change
Contents
Regulation
01
03
Introduction
ICAO Recommendation And Practice Over Various Applications
Low Intensity
05
07
09
11
13
OL10 LED Based Low Intensity Obstruction Light
E27 LED lamp for low intensity Obstruction light
Medium Intensity
15
17
OM2K LED Based Medium Intensity Aviation Obstruction Light
OM2C-D LED Based Medium Intensity Obstruction Light
Solar Light
19
21
23
25
27
29
31
33
35
37
39
OLS10 Solar Powered Low Intensity Obstruction Light
OLS32 Solar Powered Low Intensity Obstruction Light
OM2BS Solar Based Medium Intensity Obstruction Light
PL10 Solar Powered Obstruction Light
PL10A Solar Powered Obstruction Light
PL10D Double Solar powered Aviation obstruction light
PL10S Solar powered obstruction light
OLIS10-V Solar Based Low Intensity Obstruction Light
OLIS32-V Solar Based Low Intensity Obstruction Light
OLIS32 Solar Powered Low Intensity Obstruction Light
OLIS50 Solar Based Low Intensity Obstruction Light
Control Box
41
42
44
45
46
CTR04 Control Panel Indoor Type
CTR04A Control Box
CTR04B Obstruction Light Control Box
CTR04-B20 Obstruction Light Control Box
CTR04-AIDO Control box
Other
48
50
52
53
OMARK Obstruction Marking Sphere
Installation Accessories
Installation & Commissioning
Accessories for Obstruction Lighting System
Warranty Policy
54
Warranty Policy
Introduction
Aviation Obstruction light is a product to warn aircraft potential danger from above groundlevel structures like tower, smokestack, tall building, etc. In some cases, it’s also called Aircraft
Warning Light (AWL). When it comes with controller to realize extra functions like alarm
signal sending, flash synchronizing, and auto switch on at night, etc, it can also be called
Aircraft Warning Light System (AWLS).
Regulations
ICAO
• ICAO & FAA are two major international authorities that regulate obstruction light industry.
• ICAO – International Civil Aviation Organization
• FAA – Federal Aviation Authority
Some quote from ICAO Annex 14, chap. 6
6.1 The marking and/or lighting of obstacles is intended to reduce hazards to aircraft by
indicating the presence of the obstacles. It does not necessarily reduce operating limitations
which may be imposed by an obstacle.
6.3.1 The presence of objects which must be lighted, as specified in 6.1, shall be indicated y
low-, medium- or high-intensity obstacle lights, or a combination of such lights.
6.3.2 Recommendation.— low-intensity obstacle lights, type A or B, should be used where the
objects is a less extensive one and its height above the surrounding ground is less than 45m.
6.3.7 Recommendation.— medium-intensity obstacle light, type A, B or C, should be used
where the object is an extensive one or its height above the level of the surrounding ground
is greater than 45 m. medium-intensity obstacle lights, Types A and C, should be used alone,
whereas medium-intensity obstacle lights, Type B, should be used either alone or in combination with low-intensity obstacle lights, Type B.
ICAO Annex 14, chap. 6, Table6-3. Characteristics of obstacle lights
Peak intensity (cd) at given Background Luminance
Light Type
Color
Signal type
(flash rate) Above
Below
50 cd / m2
10 mnm
Vertical Beam
Spread (c)
32 mnm
32 mnm
10°
40 mnm (b)
400 max
12° (h)
Low-intensity, Type A Red
(fixed obstacle)
Low-intensity, Type B Red
(fixed obstacle)
Fixed
50-500cd
500cd / m2 / m2
10 mnm
N/A
Fixed
N/A
Low-intensity, Type C Yellow
(mobile obstacle)
Blue (a)
Low-intensity, Type D Yellow
Follow-me Vehicle
N/A
Flashing
(60-90 fpm)
N/A
Flashing
(60-90 fpm)
40 mnm (b)
400 max
Medium-intensity,
Type A
Medium-intensity,
Type B
Medium-intensity,
Type C
White
Flashing
20 000 (b)
(20-60 fpm) ± 25%
20 000 (b)
± 25%
2 000 (b)
± 25%
3° mnm
Red
N/A
Flashing
(20-60 fpm)
N/A
Fixed
N/A
2 000 (b)
± 25%
3° mnm
N/A
3° mnm
High-intensity,
Type A
White
200 000 (b) 20 000 (b)
Flashing
± 25%
(40-60 fpm) ± 25%
2 000 (b)
± 25%
2 000 (b)
± 25%
High-intensity,
Type B
White
Flashing
100 000 (b) 20 000 (b)
± 25%
(40-60 fpm) ± 25%
2 000 (b)
± 25%
3°-7
Red
10°
200 mnm (b) 200 mnm (b) 12° (i)
400 max
400 ma x
3°-7°
© Copyright 2011 Reddot Electronics Co., Ltd
www.reddotsignal.com
01
Applicable FAA Advisory Circulars
• AC 150/5345-43E Specification for Obstruction Lighting equipment
• AC 70/7460-1 Obstruction Marking and Lighting
• AC 150/5345-53 Airport Lighting Equipment Certification Program
Some quote from FAA AC 150/5345-43E
1.2 Equipment Classification
Type
FAA
Description
L-810
Steady-burning red obstruction light
L-856
High in tensity flashing white obstruction light, 40 Flashes Per Minute (FPM)
L-857
High intensity flashing white obstruction light, 60 FPM
L-864
Flashing red obstruction light, 20-40 FPM
L-865
Medium intensity flashing white obstruction light, 40 FPM
L-866
Medium intensity flashing white obstruction light, 60 FPM
L-885
Flashing red obstruction light, 60 FPM
3.3.5.2.2 Monitoring.
Each separate L-864 light unit and each tier of L-810 light units shall be monitored for
FLASH/FAIL status. FAIL is defined as outage of any lamp in an L-864 light unit, outage of
any one lamp in a tier of L-810 light units, or failure of a flasher (steady on and/or total) for an
L-864 light unit. Monitor signals shall be fail safe (i.e., active signals for FLASH and absence of
signals for FAIL). There shall be a provision to permit connection to a remote alarm device,
(supplied by others or as an option) to indicate FLASH/FAIL status.
Some quote from FAA AC 70/7460-1K
Chapter 5, 51.b.
Double Obstruction Light. A double (L-810) light should be installed when used as a top light,
at each end of a row of single obstruction lights, and in areas or locations where the failure of
a single unit could because an obstruction to be totally unlighted.
Chapter 5, 52. CONTROL DEVICE
Red obstruction lights should be operated by a satisfactory control device (e.g., photo cell,
timer, etc.) adjusted so the lights will be turned on when the northern sky illuminance
reaching a vertical surface falls below a level of 60 foot-candles (645.8 lux) but before
reaching a level of 35 foot-candles (367.7 lux). The control device should turn the lights off
when the northern sky illuminance rises to a level of not more than 60 foot-candles (645.8
lux). The lights may also remain on continuously. The sensing device should, if practical, face
the northern sky in the Northern Hemisphere. (See AC 150/5345-43.)
02
ICAO Recommendation And Practice
Over Various Applications
Tower
Height
Night only operation
Day and Night
Below 45 meters
Plan A: 2 low intensity type A or B at the top
Plan B: 2 low intensity type B at the top
3 low intensity type B at intermediate level(s)
every 45 meters on the periphery of the tower
45 m. up to
105 meters
Plan A: 2 low intensity type B at the top
3 low intensity type B at intermediate level(s)
every 45 meters on the periphery of the tower.
1 or 2 white medium intensity
type A at the top.
Plan B: 1 or 2 medium intensity lights type B at the
top. 3 low intensity lights type B at intermediate
levels at 120°
Plan C: medium intensity type A or C, use alone
Tall buildings
Above 105 meters
1 or 2 medium intensity lights type B at the top.
3 low intensity lights type B at intermediate levels
at 120°.
Above 150 meters
3 high intensity lights at 120° every 150 meters.
Height
Below 45 meters
Low intensity type A or B lights at each edge of
building and at regular interval every 45 meters.
Above 45 meters
Plan A: Low intensity type A or B lights at each
edge of building and at regular interval every 45
meters. Intermediate lights every 45 meters.
Day and Night
Plan B: medium intensity type B lights at each
edge of building and at regular interval every 45
meters. Low intensity light at intermediate level,
every 45 meters.
Wind turbines
1 or 2 white medium intensity type
A (white) at the top. 3 medium
ntensity type A at intermediate
levels.
1 or 2 white medium intensity
type A (white) at the top.
In case of a building exceeding
900 m. length, additional lights
should be installed at the edge
of the building.
Day and Night
1 or 2 medium intensity type B (red) located on
the top of the turbine. In case of a group of
windmills, additional lights at the circumference
of the farm every 450m and synchronized.
1 or 2 medium intensity type A (white) located on the
top of the turbine. In case of group of windmills,
additional lights at the circumference of the farm
every 900m and be synchronized.
03
Cranes
Height
Below 45 meters
3 low intensity type A or B lights on the jib,
counter jib and crane-top.
45 meters up to
105 meters
3 medium intensity lights type B at the top on the
jib, counter jib and crane-top.
3 low intensity lights type B at the intermediate
levels.
Above 105 meters
Chimney
1 or 2 red medium intensity type B on the
crane-top.
In case of more than one crane additional lights
should be installed and synchronized
1 or 2 white medium intensity type
A (white) on the crane-top.
In case of more than one crane,
additional lights should be installed
and synchronized.
1 or 2 red medium intensity type A
on the crane-top.
In case of more than one crane,
additional lights should be installed
and synchronized.
Above 150 meters
3 high intensity lights on the crane top
Height
Below 45 meters
3 up to 4 low intensity type A lights placed 1,5
meters up to 3 meters below the to avoid
smokes to hide the lights.
45 meters up to
105 meters
3 up to 4 medium intensity type B lights placed
1.5 meters up to 3 meters below the top. 3 up to
4 low intensity type B lights at intermediate
level(s) 45m.
3 up to 4 white medium intensity
lights type A placed 1.5 meters up
to 3 meters below the top.
Above 105 meters
3 up to 4 medium intensity type B (red) placed
1.5 meters up to 3 meters below the top.
lights type A placed 1.5 meters up
to 3 meters below the top.
lights type A at intermediate levels.
3 up to 4 low intensity type B every 45m.
Above 150 meters
Transmission
lines
Day and Night
3 high intensity lights at 120° every 150 meters.
Tower light
04
Day and Night
2 low intensity type A or B lights at the top of
each tower.
Day and Night
Aviation Obstruction Light
Low Intensity
•
•
•
•
•
OL10
OL32
OL100
OL200
E27 Bulb
http://www.reddotsignal.com/en/products/aviation/
OL10 LED Based Low
Intensity Obstruction Light
REDDOT OL10 series is typically a standard LED Obstruction light designed for airway fixed obstacle marking
application. It comply with ICAO regulation, low intensity,
type A. Working mode is steady burning.
OL10 Series Double Light
OL10 Series
Intensity
Compliant with
10cd, steady
ICAO : low intensity type A
FAA : N/A
Double light is integrated by 2 single lights. For making sure there is always a light working atop of the
tower. Two optional working patterns can meet different area’s customers.
• “Service+Standby”: Only “service light” is working normally. It will auto-transfer to “standby light” in
case of “service light” failure
• “Service+Service”: Two single lights work simultaneously. Either failure will not affect the other
normal working.
Features
•
•
•
•
•
•
•
•
Special optical design provides better light distribution
LED light source esures long lifetime, maintenance free
Low power consumption
Shock and vibration resistant
Corrosion resistant and UV stable polycarbonate housing
Ease of mount, mount accessories available
Available both in single and double type
5 years warranty
Application
•
•
•
•
•
•
•
Telecomm tower
Radio tower
Wind turbine
Smoke stacks & chimney
Tall building
Crane
Power transmission line
Standard
• ICAO Annex 14, 4th Edition, July 2004
• ICAO low intensity type A
05
Specifications
LIGHT OUTPUT
OL10S(Single)
OL10DST①(Double)
OL10DSS②(Double)
Effective Intensity
10 Candela
10 Candela
10 Candela
Vertical Divergence
10 Degree
Horizontal
360 Degree
LED color
Red
LED lifespan
100,000 Hours
OPERATION
Steady burning(default)
Flash Pattern
POWER SUPPLY
Input voltage
110-220VAC, 50/60 Hz;12VDC;24VDC;48VDC
Power Consumption
4W
4W
8W
MACHANICAL STRUCTURE
Lens
Polycarbonate,UV Stabilized
Body
Die-casting Aluminum
Water-proof
IP65
Weight
0.9KG
3.5KG
Dimension
159mmx245mm
340mmx413mmx140mm 340mmx413mmx140mm
Mounting Size
Threaded 3/4’’ bottom hub
3.5KG
-40C˚ ~ +55C˚
Temperature Range
Relative Humidity
100% with condensation
Wind speed
Up to 150mph(240kph)
Warranty
5 years
Optional
Available in flashing pattern(40FPM)
Available with built-in photosensor
Available with built-in alarm relay contacts
① ST: “Service+Standby”
② SS:”Service+Service”
Order codes
Series
OL10
Single/ AC/
Alarm
Voltage Flashing Photosensor
Double DC
relay
R
S
A
F
P
12
Pattern(For
double light only)
D
SS
D
24
ST
48
110
Pipe diameter range 30-80 mm
220
Light Effective Intensity (candela)
For example, OL10SD24R means OL10 single light, DC24V power supply, red steady
burning, with alarm relay contacts.
Ordering Code: AKU80
Mounting kit for 30-80mm vertical
or horizonal pipe
Photometric Performance
25
OL10 Data
20
ICAO 10cd minimum
requirement
15
10
5
-5˚
0˚
5˚
10˚
15˚
Vertical Divergence (degrees)
20˚
0
25˚
Mounting kit for 60-100mm vertical l pipe
06
OL32 LED Based Low
REDDOT OL32 LED Low Intensity Obstruction Light series
is a 32.5cd (candela) LED light designed for airway fixed
obstacle marking application. It comply with ICAO & FAA
regulation. It shares the same mechanical design with
OL10, but comes with more LED.
OL32 Series
Intensity
Compliant with
32.5cd, steady
ICAO : low intensity type B
FAA : L810
DGAC Mexico
OL32 series double light
• “Service+Service”: Two single lights work simultaneously. Either failure will not affect the other normal
working.
Features
• Special optical design provides better light distribution
• LED light source esures long lifetime, maintenance free
• Low power consumption
• Shock and vibration resistant
• Corrosion resistant and UV stable polycarbonate
housing
• Ease of mount, mount accessories available
• Available both in single and double type
• 5 years warranty
Application
•
•
•
•
•
•
•
Telecomm tower
Radio tower
Wind turbine
Tall building
Crane
Standard
•
•
•
•
•
ICAO Annex 14, 4th Edition, July 2004
ICAO low intensity, tpye B
FAA AC No. 150/5345-43F, 2006
FAA type L810
DGAC Mexico
07
Specifications
LIGHT OUTPUT
OL32S(Single)
OL32DST①(Double)
OL32DSS②(Double)
Effective Intensity
32.5 Candela
32.5 Candela
32.5 Candela
Vertical Divergence
10 Degree
Horizontal
360 Degree
LED color
Red
LED lifespan
100,000 Hours
OPERATION
Flash Pattern
POWER SUPPLY
Input voltage
110-220VAC, 50/60 Hz;12VDC;24VDC;48VDC
Power Consumption
6W
6W
12W
Lens
Body
Water-proof
IP65
Weight
0.9KG
3.5KG
Dimension
159mmx245mm
Mounting Size
Temperature Range
3.5KG
-40C˚ ~ +55C˚
Relative Humidity
Wind speed
Warranty
5 years
Optional
Order codes
Series
OL32
Single/ AC/
Alarm
Double DC
relay
R
S
A
F
P
12
Pattern(For
double light only)
D
SS
D
24
ST
48
110
220
For example, OL32DA220SS means OL32 double light, AC220V power supply,
red steady burning, “service+service”
or horizonal pipe
65
OL32 Data
55
FAA L810
minimum requirement
45
ICAO 32.5cd
minimum requirement
30
15
ICAO 10cd
minimum requirement
-5˚
0˚
5˚
10˚
15˚
20˚
0
25˚
08
OL100 LED Based Low
In some cases, a country has it's own Aviation regulation other than ICAO regulation. For example,
Germany and Australia require more intensity from their local Aviation Authorities. REDDOT can make
such light base on customer's request.
Double light for customized low intensity series
• “Service+Service”: Two single lights work simultaneously. Either failure will not affect the other normal
working.
Features
•
•
•
•
•
•
•
•
Special optical design provides better light distribution
LED light source esures long lifetime, maintenance free
Low power consumption
Shock and vibration resistant
Corrosion resistant and UV stable polycarbonate housing
Ease of mount, mount accessories available
Available both in single and double type
5 years warranty
Application
•
•
•
•
•
•
•
Telecomm tower
Radio tower
Wind turbine
Somke stacks & chimney
Tall building
Crane
09
Specifications
LIGHT OUTPUT
OL100S(Single)
OL100DST①(Double)
OL100DSS②(Double)
Effective Intensity
100 Candela
100 Candela
100 Candela
Vertical Divergence
10 Degree
Horizontal
360 Degree
LED color
Red
LED lifespan
100,000 Hours
OPERATION
Flash Pattern
POWER SUPPLY
Input voltage
110-220VAC, 50/60 Hz;12VDC;24VDC;48VDC
Power Consumption
8W
8W
16W
Lens
Body
Water-proof
IP65
Weight
0.9KG
3.5KG
Dimension
159mmx245mm
Mounting Size
3.5KG
-40C˚ ~ +55C˚
Temperature Range
Relative Humidity
Wind speed
Warranty
5 years
Optional
Order codes
Single/ AC/
Alarm
Double DC
relay
R
A
OL100 S
F
P
12
Series
D
D
Pattern(For
double light only)
ST
SS
24
48
110
220
For example, OL100SA220PST means OL100 double light, AC220V power supply, red
steady burning, with built-in photosensor, “service+standy”
or horizonal pipe
150
OL100 Data
120
FAA L810
minimum requirement
90
60
30
-5˚
0˚
5˚
10˚
15˚
20˚
0
25˚
ICAO 32.5cd
minimum requirement
ICAO 10cd
minimum requirement
10
OL200 LED Based Low intensity
Reddot OL200 is a type of low intensity aviation obstruction
light, peak intensity can be up to 200 Candelas, by far exceed
International standard ICAO type B(32.5Candelas)
Compliant
Australia CASA Mos Part 139
UK CAP168 Low Intensity Obstacle(Group B)
Features
NFL 197-107/03, Neues feuer W-ROT
• Configured ultra-bright LEDs technology ensure long-life and
free maintenance
• Low power consumption
• Special lens design enhance LED efficient and distributes 360 degree visibility
• Robust aluminum base with electrostatic powder painting, better corrosion-resistance
• Self-contained design for wiring which eliminate additional junction box
• Stainless steel Cable gland for easy cable entry and wring
• Optional built-in photosensor, which can work independently, turn on/off automatically from dusk to
dawn
• Optional dry contact alarm relay, 3-pin side-entry screw terminal block ”NO-COM-NC”
• Available steady-burning or flashing type
• Light-weight and easy installation
combined with REDDOT mounting kits
Application
•
•
•
•
•
•
Telecom&transmission tower
Wind turbine
Smoke stacks&chimney
Oil offshore platform
Crane
High-rise building
11
23.2
Specifications
Light out-put
Peak Intensity
200 cd
Vertical Divergence
+5 to +8 degree 200cd
0 to +15 degree 50cd
Horizontal out-put
360 degree
LED color
Red(white, yellow, green, blue availabe)
10,000 hours
10.0
LED lifespan
204.5
Power supply
Operation voltage
12VDC, 24VDC, 48VDC, 110VAC, 220VAC(50-60HZ)
Steady-Burning or
Flash Pattern
Flashing(40FPM as defunit)
15W
Power consumption
215.5
Mechanical structure
Lens
Polycarbonate, UV Stablized
Body
Aluminum die-casting
Waterproof
IP67
Weight
3.5KG
95.0
89°
Ø177.0
Ø226.0
Temperature range
-40C°-+50C°
Relative Humidity
Dimensions
215.5mm Height, 226mm Diameter
Optional
Available with built-in photo sensor
Available with built-in alarm relay
Installation
AMP3080
Ordering Code
Series Single/Double AC/DC Voltage Flashing Photo sensor Alarm Relay
OL200 S
A
12
D
D
24
F
P
R
48
110
220
AMP30150
REDDOT AMP mounting kit : Ordering Code
Series
Vertical tower leg
diameter range
Horizontal tower leg
diameter range
AMP3080
30-80mm
30-80mm
AMP30150
30-150mm
30-80mm
250
200
150
100
OL200 Data
FAA L810 minimum requirement
ICAO 32.5cd minimum requirement
ICAO 10cd minimum requirement
50
-5˚
0˚
5˚
10˚
15˚
20˚
0
25˚
12
E27 LED lamp for low intensity
Reddot E27 LED lamp is specially designed for low intensity obstruction light. with Fresnel optic lens, in
compliance with ICAO and FAA standard.
Features
Electronic characters:
• Self-contained electronic control design
• Based on LED technology, long lifetime, low maintenance
cost
• Extremely low power consumption,
• Top mounted LED indicator for power supply and operation
status
• Over voltage protection
• Reverse polarity protection
• Available in DC12/24/48V and AC110/220C
Mechanical characters:
• Universal E27 lamp holder, easy replacement
• Robust aluminum lamp body, providing better heat
dissipation
• Good anti-vibration
Advantage Comparison
Reddot E27 LED lamp
Traditional LED lamp
(incandescent , fluorescent)
Very low power consumption
(E27100 only 8W)
High power consumption
(100W or more)
Reliable long lifetime, Low
maintenance cost
High replacement frequency
Better anti-vibrant and robust
structure
Easy to break during
transportation and installation
Compact electronic control design,
expandable functions(eg. built-in
photosensor, flashing rate
adjustable), can work standalone
even without controller
Not Electronics friendly, must
work with controller
E2732
13 www.reddotsignal.com
E2710
E27100
Specifications
E2710
E2732
E27100
Effective Intensity (Work in light)
>10cd
>32.5cd
>100cd
Standard
ICAO type A
ICAO type B
FAA L810
>ICAO type B
>FAA L810
CASA
LED Nos
8
16
16(High-Flux)
Vertical Divergence
120 degree
Horizontal Output
360 degree
LED color
Aviation Red, Other colors are available upon request
LED lifespan
100,000 hours
Operation pattern
Steady-burning
Ø52±0.5
LIGHT OUT-PUT
Nominal Voltage
12VDC,24VDC,48VDC
110VAC, 220VAC 50/60HZ
Power Consumption
4W
6W
128+50
Power Supply
8W
Mechanical Structure
Body
Aluminum
Base
E27
Weight
0.15KG
Temperature Range
-40°C- +55°C
Dimension
128mm*52mm(HxDia.)
Warranty
5 year
E27
Type
Series
AC/DC
Voltage
E27
10
A
12
32
D
24
100
48
110
220
For example, E2732D48 means, E27 LED lamp, effective intensity>32.5cd fitted in Fresnel
lens, DC48V power supply , steady-burning.
Photometric Performance (Work in light)
120
E2710 Data
E2732 Data
E27100 Data
FAA L810 minimum requirement
ICAO 32.5cd minimum requirement
115
110
105
100
95
90
85
80
75
70
65
60
55
Recommendation:
50
45
•
40
35
30
25
20
15
10
5
0
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
20
For buyers who have installed other
brand-name obstruction light that with
Fresnel Lens, REDDOT E27 lamp can fit
into most of them after minor LED position
change vertically.
• Please consult our sales for further
assistance.
14
Medium
ium
ium
iu
m Int
In
Intensity
tensity
ensiity
ty
ty
• OM2K
M
• OM
OM2C-D
M2
M
2C-D
C-D
http://www
http://www.reddotsignal.com/en/produ
reddotsignal com/en/pr
ation/
on/
OM2K LED Based Medium
OM2K is a new generation medium intensity OB light. It
comes with compact-size and light-weight, which makes
installation job nice & easy.
The optical part is based on Fresnel lens, a transformed
convex lens which can concentrate light to a small specific
angel to meet with ICAO requirements. Fresnel lens is
often used to design obstruction light.
OM2K Series
Intensity
2000 cd
Compliant with
Steady
ICAO : Medium intensity type C
Flashing ICAO : Medium intensity type B
FAA Type L864
The light's ingress protection level is IP67, assures the light is well sealed to stand harsh environment
include the ocean. If work with control box, more functions like synchronization could be realized. GPS
or GPRS functions also available if needed.
Medium intensity light OM2K is for tower taller than 45m. It should be used either alone, or in combination with low-intensity light type B (our OL32 series).
Features
• Unique optical design complies with ICAO
regulation
• Aluminum head provides good thermal
performance
• Better shock-resistant perform than Xenon
• Longer lifetime expectancy
• Almost maintenance free
• Lower voltage (than xenon) makes it safer
for installer
• Cost effective in long run
• 5 years warranty
Application
•
•
•
•
Telecomm tower
Radio tower
Wind turbine
Standard
•
•
•
•
ICAO medium intensity type B & type C
FAA AC No. 150/5345-43F,2006
FAA type L864
15
Specifications
160
LIGHT OUT-PUT
2000 Candela
Peak Intensity
Horizontal out-put
360 Degree
LED Color
Red
LED Lifespan
100,000 Hours
210
-1° 950cd, Centering at 0.5°
Vertical Divergence
OPERATION
Steady-burning or flashing
Flash Pattern
POWER SUPPLY
Input voltage
110VAC ~ 220VAC, 24VDC, 48VDC
Frequency
50Hz ~ 60Hz
Rated consumption
40W with steady mode
MECHANICAL STRUCTURE
Lens
Polycarbonate, UV Stabilize
Body
Water-proof
IP67
Weight
4.5 KG
-40 ~ +55
Temperature Range
Relative humidity
Dimensions
210mm H, 226mm Diameter
Warranty
5 years
Optional
226
Available with built-in Alarm relay
Installation
Order Codes
Series Steady/flashing AC/DC Voltage
Photo sensor
Alarm relay
OM2K C (steady)
P
R
B (flashing)
A
12
D
24
AMP3080
48
110
220
For example, OM2KBD24 means a DC 24V power supply, flashing Medium
Iutensity beacon.
AMP30150
Vertical tower leg
diameter range
diameter range
AMP3080
30-80mm
30-80mm
AMP30150
30-150mm
30-80mm
2500
2000
Peak Intensity
2000
-1˚ Intensity
950
1500
1000
500
-5
-4
-2
-3
0
-1
-1
-2
-3
-5
0
-4
Series
OM2K Data
ICAO Maximum
Requirement
ICAO Minimum
Requirement
OM2C-D LED Based Medium
OM2C-D is a new generation medium intensity OB light. It
comes with compact-size and light-weight, which makes
installation job nice & easy.
OM2C-D Series
Peak Intensity
2000cd, steady
The optical part is based on Fresnel lens, a transformed
convex lens which can concentrate light to a small specific angel. Fresnel lens is often used to design
obstruction light.
The light's ingress protection level is IP67, assures the light is well sealed to stand harsh environment
include the ocean. If work with control box, more functions like synchronization could be realized. GPS
or GPRS functions also available if needed.
Medium intensity light OM2C-D is for tower taller than 45m. It should be used either alone, or in combination with low-intensity light type B (our OL32).
The light comes with a plug type connection, which makes installation nice & easy. When the light has
a built-in alarm relay, one more plug will be added to the base (alarm function needs 2 core shielded
cable). A junction box that mounted on the double bracket has a PCB who can auto transfer to the
standby light in case of failure of the service light, in “service+standby” mode.
Features
•
•
•
•
•
•
•
•
Unique optical design complys with ICAO regulation
Aluminum head provides good thermal performance
Better shock-resistant perform than Xenon
Longer lifetime expectancy
Almost maintenance free
Lower voltage (than xeon) makes it safer for installer
Cost effective in long run
5 years warranty
Application
•
•
•
•
Telecomm tower
Radio tower
Wind turbine
Standard
17
Specifications
160
LIGHT OUT-PUT
2000 Candela
Peak Intensity
Horizontal out-put
360 Degree
LED Color
Red
LED Lifespan
100,000 Hours
210
-1° 450cd, Centering at 0.5°
Vertical Divergence
OPERATION
Steady-burning
Flash Pattern
POWER SUPPLY
Input voltage
110VAC ~ 220VAC, 24VDC, 48VDC
Frequency
50Hz ~ 60Hz
Rated consumption
40W (service+standby)
80W (service+service)
Lens
Body
Water-proof
IP67
Weight
12 KG
-40 ~ +55
Temperature Range
226
Relative humidity
Dimensions
210mm H, 226mm Diameter (for one lamp)
Warranty
5 years
Optional
Avalaible with built-in alarm relay
15
Order Codes
Series
Steady/
flashing
OM2C-D C (steady)
B (flashing)
AC/DC Voltage Photo
sensor
Alarm
relay
Pattern(For
double light only)
A
12
P
R
ST
D
24
SS
48
110
220
For example, OM2KBD24 means a DC 24V power supply, flashing Medium
Iutensity beacon.
Solar Series
•
•
•
•
•
•
•
•
•
•
•
OLS10
OLS32
OM2BS
PL10
PL10A
PL10D
PL10S
OLIS10-V
OLIS32-V
OLIS32
OLIS50
OLS10 Solar Powered Low
OLS10 series is solar powered obstruction light. Solar
OLS10 Series
function make it a self-contained and alomst care-free
Intensity
light unit.
Compliant with
The light system is composed of 3 parts, light, battery box
and solar panel. When the light and solar panel connected to the battery box, the whole system can be
mounted on a tower. Both vertical mounting and horizontal mounting are ok.
OLS10 is equipped with a 10Ah VRLA (volve regulated
lead acid) rechargeable battery which could power the light up
to 5 days when the weather is cloudy & rainy. The 10Ah VRLA battery is
also easy to find almost anywhere.
Both single light & double light are available in this series.
Features
• Green enegy
• Ultra-light LEDs, energy saving
• Self-contained without outside power supply
• Maximum visibility distance 4 KM
• Once fully charged, it can work for up to 60
hours
• Cable cost saving & cabling job saving
• No wiring job, nice & easy installation
Applications
• Telecomm tower
• Radio tower
• Wind turbine
• Somke stacks & chimney
• Tall building
• Power transmission line
Standard
• ICAO low intensity, type A
10cd, steady
FAA : N/A
Specifications
600.0
266.0
LIGHT OUT-PUT
Effective Intensity
10 Candela
Vertical Divergence
-3°~20° more than 10cd, Centering at 10°
Horizontal out-put
360 Degree
LED Color
Red
LED Lifespan
100,000 Hours
300.0
352
OPERATION
Steady
Flash Pattern
420.0
POWER SUPPLY
Solar panel
17.5V / 15W module
Rechargeable battery
VRLA, 12V / 10Ah
Autonomy
5 days (in cloudy & raning weather)
Lens
Body
Water-proof
IP65
Weight
11 KG
205.0
-40C˚ ~ +55C˚
Temperature Range
Relative humidity
Battery box dimensions
352mm H, 204mm W, 650mm L
Solar module dimensions
420mm * 300mm * 28mm
Warranty
5 years for light body,
10 years for solar panel
2 years for VRLA battery
Order codes
Series
Single/Double
OLS10
S
D
For example,
OLS10S means a solar powered single light
Horizontal Mount
Vertical Mount
20
OLS32 Solar Powered Low
OLS32 series is solar powered obstruction light. Solar
unction make it a self-contained and alomst care-free
ght unit.
he light system is composed of 3 parts, light, battery box
nd solar panel. When the light and solar panel connected
o the battery box, the whole system can be mounted on a
ower. Both vertical mounting and horizontal mounting are ok.
OLS32 is equipped with a 20Ah VRLA (volve regulated
ead acid) rechargeable battery which could power the
ght up to 5 days when the weather is cloudy & rainy. The
0Ah VRLA battery is also easy to find almost anywhere.
oth single light & double light are available in this series.
eatures
Green enegy
Ultra-light LEDs, energy saving
Self-contained without outside power supply
Maximum visibility distance 5 KM
Once fully charged, it can work for up to 60
ours
Cable cost saving & cabling job saving
No wiring job, nice & easy installation
pplications
Telecomm tower
Radio tower
Wind turbine
Tall building
tandard
ICAO low intensity, type B
AA AC150/5345-43F, 2006
AA, type L810
OLS32 Series
Intensity
Compliant with
32.5cd, steady
FAA : L810
Specifications
700.0
LIGHT OUT-PUT
266.0
Effective Intensity
32.5 Candela
Vertical Divergence
-3°~20° more than 10cd, Centering at 10°
Horizontal out-put
360 Degree
LED Color
Red
LED Lifespan
100,000 Hours
410
352.0
OPERATION
Steady
Flash Pattern
600
POWER SUPPLY
Solar panel
17.5V / 30W module
VRLA, 12V / 20Ah
Autonomy
Lens
Body
Water-proof
IP65
Weight
15 KG
204.8876
-40C˚ ~ +55C˚
Temperature Range
Relative humidity
Battery box dimensions
352mm H, 204mm W, 650mm L
600mm * 410mm * 28mm
Warranty
10 years for solar panel
Order codes
Series
Single/Double
OLS32
S
D
For example,
OLS32D means a solar powered double light
Horizontal Mount
Vertical Mount
22
OM2BS Solar Based Medium
OM2BS series is solar powered obstruction light. Due to
solar module's limitation like solar panel size and battery
size, the light is being designed to work under flashing
mode instead of stead-burning mode.
But advantages like enegy saving and cable saving make
the solar powered light a good option on obstruction
marking.
Features
• Green enegy
Application
•
•
•
•
•
•
Telecomm tower
Radio tower
Wind turbine
Tall building
Standard
• ICAO medium intensity, customized
OM2BS Series
Intensity
2000 cd, Flashing
Compliant with
ICAO : Medium intensity type B
Specifications
LIGHT OUT-PUT
2000 Candela
Effective Intensity
Peak intensity at 1° with 3° spread angle
Vertical Divergence
Horizontal out-put
360 Degree
LED Color
Red
LED Lifespan
100,000 Hours
226
OPERATION
515.5
Flashing (default 40FPM)
Flash Pattern
264.0
POWER SUPPLY
17.5V / 15W module
lead-acid type, 12V / 12Ah (VRLA)
Autonomy
210
160
Solar panel
Lens
Body
Water-proof
IP65
Weight
11 KG
Temperature Range
-40°C ~ +55°C
Relative humidity
Light dimensions
420mm * 600mm (bracket not included)
Light module dimensions
625mmH, 515mmL, 450mmW
Warranty
5 years for light body
2 years for battery
10 years for solar module
545
OM2B-A Series Photometric Performance
2500
Peak Intensity
2000
-1˚ Intensity
950
2000
1500
1000
500
OM2B-A Data
ICAO Maximum Requirement
ICAO Minimum Requirement
-5
-4
-3
-2
-1
0
-1
-2
-3
-4
-5
0
24
PL10 Solar Powered
Obstruction Light
The solar panel comes with PL10 provides power supply to
the light, which makes PL10 a self-contained and care-free
light unit. Also, with the solar function, the light is easy to
deploy to almost any condition and any emergency case.
Robust body built and surface coating provides good
protection against hash environments.
Compliant
ICAO Annex 14, Volume 1, 4th Edition, July 2004
FAA Advisory Circular AC150/5370-2F
PL10 is equipped with an 8Ah NiMH rechargeable battery which could power the light up to 20 days
when the weather is cloudy & rainy. NiMH battery is also a clean power source with no pollution. The
NiMH battery is also easy to find almost anywhere.
PL10 is also available with an optional on/off switch for
storing and protect battery from over-discharging.
Features
•
•
•
•
hours
• Auto-off after being packed for 18 hours
Application
•
•
•
•
•
•
•
High-rise building marking
Telecom tower marking
Road obstruction marking
Navigation aid
Port, dock entrance & walkway
Buoy marking
Offshore gas & oil platform
Specifications
23.2
LIGHT OUT-PUT
Intensity
FLASHING
Red: >10cd
Green:>20cd
White:>25cd
Blue:>5cd
Yellow: >10cd
STEADY
Red: >4cd
White:>10cd
Yellow: >4cd
Green: >8cd
Blue:>2cd
Nominal Night Range
>4 KM
LED Color Available
Red, Green, Yellow, White, Blue
Vertical Divergence
10 Degree
Horizontal Out-put
360 Degree
Illumination
Ultra-bright LEDs
LED Lifespan
100,000 Hours
10.0
204.5
OPERATION
Autonomy
Flashing : 200 Hours / Steady : 100 Hours
On & Off Level
70/100 Lux
Flash Pattern
40FPM default（can be preprogrammed to a
specified flashing rate upon customer request)
215.5
95.0
89°
POWER SUPPLY
Power Source
Solar module, mono-crystalline silicon
Solar Efficiency
13.5%
Ø177.0
Ø226.0
Max. Power Out-put
1.8 Watts
Battery Type
High-efficiency NiMH rechargeable battery
Battery Capacity
8 AH / 3.6V
Battery Replacement
Yes, replaceable
Installation
Lens
Body
Water-proof
IP67
Weight
3.5 KG
Temperature Range
-40C˚ ~ +55C˚
Dimensions
215.5mm H, 226mm Diameter
Warranty
5 years for light
AMP3080
2 years for NiMH battery
Note: when the light is in storage, please put it outside to charge the battery
every 3 months
AMP30150
Series
Vertical tower leg
diameter range
diameter range
AMP3080
30-80mm
30-80mm
AMP30150
30-150mm
30-80mm
26
PL10A Solar Powered
Obstruction Light
PL10A based on PL10 basic features, configured synchronization and alarm signal output functions. An
internal solar panel comes with PL10A, provides power supply to the light, which makes PL10A a selfcontained and care-free light unit. Also, with the solar function, the light is easy to deploy to almost any
condition and any emergency case. Robust body built and surface coating provides good protection
against hash environments.
PL10A is equipped with an 8Ah NiMH rechargeable battery which could power the light up to 20 days
Features
Application
•
•
•
•
•
•
•
•
•
•
•
•
•
Dry contact type alarm out-put
Group Synchronization by sync data shielded cable
One unit Can be working independently as PL10
Once fully charged, it can work for up to 200 hours
Auto-off after being packed for 18 hours
Navigation aid
Buoy marking
1
1. Built-in 1.8W solar panel
2. Data interface for synchronization and alarm
signal output
3. 4-pin IP67 cable connector
2
3
3
Specifications
23.2
LIGHT OUT-PUT
Intensity
FLASHING
Red: >10cd
Green:>20cd
White:>25cd
Blue:>5cd
Yellow: >10cd
STEADY
Red: >4cd
White:>10cd
Yellow: >4cd
Green: >8cd
Blue:>2cd
Nominal Night Range
>4 KM
LED Color Available
Vertical Divergence
10 Degree
Horizontal Out-put
360 Degree
Illumination
Ultra-bright LEDs
LED Lifespan
100,000 Hours
10.0
204.5
OPERATION
Autonomy
On & Off Level
70/100 Lux
Flash Pattern
215.5
95.0
89°
POWER SUPPLY
Power Source
Solar Efficiency
13.5%
Ø177.0
Ø226.0
Max. Power Out-put
1.8 Watts
Battery Type
Battery Capacity
8 AH / 13.6V
Battery Replacement
Yes, replaceable
Installation
Lens
Body
Water-proof
IP67
Weight
3.5 KG
Temperature Range
-40C˚ ~ +55C˚
Dimensions
Warranty
5 years for light
AMP3080
every 3 months
AMP30150
Series
Vertical tower leg
diameter range
diameter range
AMP3080
30-80mm
30-80mm
AMP30150
30-150mm
30-80mm
Note: details referred to REDDOT RDM-AMP-04 and RDMP-AMP-06
28
PL10D Double Solar powered
Aviation obstruction light
Based on REDDOT PL10, PL10D is a “twin” model which can be working synchronization. An internal
solar panel comes with each single light of PL10D, provides power supply to the light, which makes
PL10D a self-contained and care-free light unit. Also, with the solar function, the light is easy to deploy
to almost any condition and any emergency case. Robust body built and surface coating provides good
protection against hash environments.
PL10D is equipped with an 8Ah NiMH rechargeable battery for each single which could power the light
up to 20 days in flashing mode when the weather is cloudy & rainy. NiMH battery is also a clean power
source with no pollution. The NiMH battery is also easy to find almost anywhere.
Features
Application
• Ultra-Bright LED, energy saving
• Once fully charged, it can work for up to
200hours
• Either single light fails will not affect the other
normal working
•
•
•
•
•
•
•
Navigation aid
Buoy marking
2
1
3
4
5
1. Master light
2. Slave light
3. PG9 cable gland
4. 3*0.5mm2 shield cable
5. IP68 4-pin cable connector
Specifications
23.2
LIGHT OUT-PUT
Intensity
FLASHING
Red: >10cd
Green:>20cd
White:>25cd
Blue:>5cd
Yellow: >10cd
STEADY
Red: >4cd
White:>10cd
Yellow: >4cd
Green: >8cd
Blue:>2cd
Nominal Night Range
>4 KM
LED Color Available
Red
Vertical Divergence
10 Degree
Horizontal Out-put
360 Degree
Illumination
Ultra-bright LEDs
LED Lifespan
100,000 Hours
10.0
204.5
OPERATION
Autonomy
On & Off Level
70/100 Lux
Flash Pattern
215.5
95.0
89°
POWER SUPPLY
Power Source
Solar Efficiency
13.5%
Ø177.0
Max. Power Out-put
1.8 Watts
Ø226.0
Battery Type
Battery Capacity
8 AH / 13.6V
Battery Replacement
Yes, replaceable
Lens
Body
Water-proof
IP67
Weight
3.5 KG
Temperature Range
-40C˚ ~ +55C˚
Dimensions
Warranty
5 years for light
Installation
every 3 months
REDDOT AMP-D mounting kit:
Ordering Code
Ordering Code
Suitable for pipe diameter
Installation type
AMP-D-80
30-80mm
Vertical
AMP-D-100
60-100mm
Vertical
AMP-D-150
100-150mm
Vertical
Noting:
Details referred to REDDOT RDM-AMP-D-02 drawing.
30
PL10S Solar powered
obstruction light
PL10S is a member of PL10 series, configured two toggle switches. An internal solar panel comes with
PL10S, provides power supply to the light, which makes PL10S a self-contained and care-free light unit.
Also, with the solar function, the light is easy to deploy to almost any condition and any emergency
case. Robust body built and surface coating provides good protection against hash environments.
PL10S is equipped with an 8Ah NiMH rechargeable battery which could power the light up to 20 days
Two toggle switches built on PL10S body:
1. ON/OFF for saving power consumption and protecting battery from over-discharging during storing
or transportation.
2. AUTO/MANUAL for EMERGENCY use.
AUTO : auto-switch on/off from dusk to dawn
MANUAL : mandatary-switch on
Features
•
•
•
•
hours
1
Application
•
•
•
•
•
•
•
Navigation aid
Buoy marking
1. Built-in 1.8W solar panel
2
2. On/Off toggle switch
3. Auto/Manual toggle switch
3
Specifications
23.2
LIGHT OUT-PUT
Intensity
FLASHING
Red: >10cd
Green:>20cd
White:>25cd
Blue:>5cd
Yellow: >10cd
STEADY
Red: >4cd
White:>10cd
Yellow: >4cd
Green: >8cd
Blue:>2cd
Nominal Night Range
>4 KM
LED Color Available
Red
Vertical Divergence
10 Degree
Horizontal Out-put
360 Degree
Illumination
Ultra-bright LEDs
LED Lifespan
100,000 Hours
10.0
204.5
OPERATION
Autonomy
On & Off Level
70/100 Lux
Flash Pattern
215.5
95.0
89°
POWER SUPPLY
Power Source
Solar Efficiency
13.5%
Ø177.0
Max. Power Out-put
1.8 Watts
Ø226.0
Battery Type
Battery Capacity
8 AH
Battery Replacement
Yes, replaceable
Lens
Body
Water-proof
IP67
Weight
4.5 KG
Temperature Range
-40C˚ ~ +55C˚
Dimensions
Warranty
5 years for light
Installation
every 3 months
REDDOT AMP-D mounting kit:
Ordering Code
Ordering Code
Suitable for pipe diameter
Installation type
AMP-D-80
30-80mm
Vertical
AMP-D-100
60-100mm
Vertical
AMP-D-150
100-150mm
Vertical
Noting:
Details referred to REDDOT RDM-AMP-D-02 drawing.
32
OLIS10-V Solar Based Low
OLS10-V series is solar powered obstruction light.
OLIS10-V Series
Solar function make it a self-contained and alomst
Intensity
10cd, steady
care-free light unit. Also, with the solar function, the
Compliant with
light is easy to deploy to almost any condition and
FAA
: N/A
any emergency case.
Robust body built and surface coating provides
good protection against hash environments. Other advantages like enegy saving and cable
saving make the solar powered light a good option on obstruction marking.
OLIS10-V is equipped with a 8Ah VRLA (volve-regulated lead acid)
rechargeable battery which could power the light up to 5 days when the weather is cloudy &
rainy. The 7.2Ah VRLA battery is also easy to find almost anywhere.
Features
• Green enegy
• Once fully charged, it can work for up to 60 hours
Application
• Telecomm tower
• Radio tower
• Wind turbine
• Tall building
Standard
• ICAO low intensity, type A
Specifications
390.50
10 Candela
Vertical Divergence
10 Degree
Horizontal out-put
360 Degree
LED Color
LED Lifespan
100,000 Hours
15°
Effective Intensity
296
LIGHT OUT-PUT
OPERATION
Steady-burning > 10CD
Flashing > 32.5CD
Flash Pattern
314
POWER SUPPLY
17.5V / 5W module
VRLA type, 8Ah/12V
Autonomy
164
Solar panel
Lens
Body
Water-proof
IP67
Weight
9 KG
Temperature Range
-40C˚ ~ 60C˚
Relative humidity
Light dimensions
296mm H, light diameter 235mm
164mm * 314mm
Warranty
Note: when the light is in storage, please put it outside to charge
thebattery every 3 months
25
20
15
OLIS10-V Data
10
5
-5˚
0˚
5˚
10˚
15˚
20˚
0
25˚
34
OLIS32-V Solar Based Low
OLIS32-V solar powered obstruction light, solar
self-contained design makes it easy to install any
condition and any emergency case.
OLIS32-V
Intensity
Compliant with
32.5cd, steady
FAA : L810
Robust body built and surface coating provides
DGAC Mexico
good protection against hash environments. Other
advantages like energy saving and cable saving make the solar powered light a good option
on obstruction marking.
OLIS32-V is equipped with a 16Ah VRLA (volve-regulated lead acid) rechargeable battery
which could power the light up to 5 days when the weather is cloudy &rainy. The 16Ah VRLA
battery is also easy to find almost anywhere.
Features
• Green energy
• Maximum visibility distance 5KM
• Once fully charged, it can work for up to 60 hours
Standard
• ICAO low intensity, type B
• FAA AC No. 150/5345-43F, 2006
• FAA type L810
Application
• Telecomm tower
• Radio tower
• Wind turbine
• Tall building
Specifications
LIGHT OUT-PUT
Intensity
32.5 Candela
LED Color Available
Red
Vertical Divergence
10 degree
Horizontal Out-put
360 degree
Illumination
Ultra-bright LEDs
LED Lifespan
100,000 hours
OPERATION
Autonomy
Steady: 5 days(14 hours/day)
On & Off Level
70/100 Lux
Flash Pattern
Steady-burning > 10CD
Flashing > 32.5CD
Ø 177
Solar Efficiency
13.5%
Max. Power Out-put
20 Watts
Battery Type
High-efficiency Lead-Acid rechargeable battery
Battery Capacity
16 AH / 12V
Battery replacement
Yes, replaceable
448
Power Source
Lens
Body
Water-proof
IP67
Weight
10 KG
Temperature Range
-40C° ~ +55C°
Light Dimensions
Solar Module dimension
306mm*420mm
Warranty
5 years for light
2 years for VARA battery
Note: when the light is in storage, please put it outside to
charge the battery every 3 months
65
55
45
30
15
-5˚
0˚
5˚
10˚
15˚
20˚
0
25˚
36
324
POWER SUPPLY
OLIS32 Solar Powered Low
The solar panel comes with OLIS32 provides power supply
to the light, which makes OLIS32 a self-contained and
care-free light unit. Also, with the solar function, the light
is easy to deploy to almost any condition and any emergency case. Robust body built and surface coating
provides good protection against hash environments.
OLIS32 Series
Intensity
Compliant with
32.5cd, flashing
ICAO : N/A
FAA : N/A
OLIS32 is equipped with an high-efficiency rechargeable battery which could power the light up to 20
days when the weather is cloudy & rainy. The rechargeable battery is also easy to find almost anywhere.
OLIS32 is working under flashing mode, while ICAO requires that the low intensity light to be steady.
But, anyway, OLIS32 could be a alternative option for some special needs.
Features
•
•
•
•
•
Once fully charged, it can work for up to 200 hours
Auto-off after being packed for 18 hours
Application
•
•
•
•
•
•
•
Navigation aid
Buoy marking
Specifications
Ø177
FLASHING
Intensity
32.5 Candela
Nominal Night Range
>5 KM
LED Color Available
Vertical Divergence
10 Degree
Horizontal Out-put
360 Degree
Illumination
Ultra-bright LEDs
LED Lifespan
100,000 Hours
297.80
LIGHT OUT-PUT
174
OPERATION
Autonomy
200 Hours
On & Off Level
70/100 Lux
Flash Pattern
Steady 20-90FPM (Preprogrammed default 40FPM)
Power Source
Solar Efficiency
13.5%
Max. Power Out-put
12 Watts
Battery Type
Battery Capacity
12V / 8AH
Battery Replacement
Yes, replaceable
Ø235
51
6
POWER SUPPLY
Lens
Body
Extrude-Aluminum
Water-proof
IP67
Weight
9 KG
Temperature Range
-40C˚ ~ +55C˚
Dimensions
Warranty
5 years for light
199.78
2 years for Lead-Acid battery
199.78
every 3 months
65
55
45
30
15
-5˚
0˚
5˚
10˚
15˚
20˚
0
25˚
38
OLIS50 Solar Based Low
The solar panel comes with OLIS50 provides power
supply to the light, which makes OLIS50 a self-contained
and care-free light unit. Also, with the solar function, the
light is easy to deploy to almost any condition and any
emergency case. Robust body built and surface coating
provides good protection against hash environments.
OLIS50 is equipped with an high-efficiency
rechargeable battery is also easy to find almost anywhere.
OLIS50 is working under flashing mode, while ICAO requires
that the low intensity light to be steady. But, anyway,
OLIS50 could be a alternative option for some special
needs.
Features
• Once fully charged, it can work for up to 200
hours
Application
•
•
•
•
•
•
•
Navigation aid
Buoy marking
OLIS50 Series
Intensity
Compliant with
50cd, flashing
ICAO : N/A
FAA : N/A
Specifications
FLASHING
Intensity
50 Candela
Nominal Night Range
>6 KM
LED Color Available
Red
Vertical Divergence
10 Degree
Horizontal Out-put
360 Degree
Illumination
Ultra-bright LEDs
LED Lifespan
100,000 Hours
OPERATION
Autonomy
200 Hours
On & Off Level
70/100 Lux
Flash Pattern
Steady 20-90FPM (Preprogrammed default 40FPM)
324
LIGHT OUT-PUT
448
Ø 177
POWER SUPPLY
Power Source
Solar Efficiency
13.5%
Max. Power Out-put
20 Watts
Battery Type
Battery Capacity
12V / 16AH
Battery Replacement
Yes, replaceable
Ø 235
Ø 16
Body
Water-proof
IP67
Weight
13.5 KG
Temperature Range
-40C˚ ~ +55C˚
Dimensions
Warranty
5 years for light
200
Lens
2 years for Lead-Acid battery
200
every 3 months
100
80
60
40
20
-5˚
0˚
5˚
10˚
15˚
20˚
0
25˚
40
CTR Control Box
Series
•
•
•
•
•
CTR04
CTR04A
CTR04B
CTR04-B20
CTR04-AIDO
h
http
// w r d otsignal.com/
com/en/p ducts/av
viation/
CTR04 Control Panel
Indoor Type
CTR04 is a microprocessor indoor control panel device for monitoring and controlling obstruction
lights, mostly for telecom, GSM, Microwave and TV towers.
Connected with external photocell, the control panel will turn on/off automatically obstruction lighting
system from dusk to dawn. Even at day time, the control panel is still in monitoring status.
CTR04 can be preprogrammed for different obstruction lighting configurations.
Features
• Control up to four channels light output, each channel control up to four LED low intensity obstruction light or one LED low intensity double obstruction light.
• Steady-burning and flashing mode adjustable by DIP switch
• Auto/manual mode by DIP switch
• Photocell with prewired shielded cable in five meters long
• Transfer relay for “service+standby” double obstruction light system
• LED indicator for lights, power, photocell operation status
• Dry contact alarm output for lights and power
• NO or NC alarm output contacts optional as customer alarm device type
• 35mm Din-rail mounting rail , easy to install
Specifications
Description
Parameter
Input Voltage
•
•
•
Power consumption
2W
Flash rate
Steady-Burning/40FPM(default)
Photocell sensitivity
70/100Lux
Operating temperature
range
-30℃——+60℃
Enclosure
PC
85-265VAC, 50/60HZ
48VDC
24VDC
Protection class
IP20
Dimension(HxWxDepth) 155x110x65mm
Weight
0.5kg
41
CTR04A Control Box
CTR04A control box is a microprocessor outdoor controller device for monitoring and controlling
obstruction lights, mostly for telecom, GSM, Microwave and TV towers.
Connected with external photocell, the control panel will turn on/off automatically obstruction lighting
system from dusk to dawn. Even at day time, the control panel is still in monitoring status.
CTR04 can be preprogrammed for different obstruction lighting configurations.
Features
MECHANICAL
• Aluminum alloy Enclosure, IP67, outdoor type, good corrosion resistance
• Circuit breaker switch, surge protection and terminal block are suitable for DIN rail mounting
• The enclosure door is secured by four captive screws
• Supplied with PG13.5 cable glands
• Four threaded mounting holes in the back of control box, suitable for attaching to any vertical
surface or rack mounting.
ELECTRICAL
• Control up to four channels light output, each channel control up to four LED low intensity
obstruction lights or one LED medium intensity beacon.
• NO or NC alarm output contacts optional as customer alarm device type
• Overvoltage protection and MOV surge protection
• Circuit breaker protection and fuse protection
Specifications
Parameter
Input Voltage
•
•
Power consumption
10W
Flash rate
70/100Lux
range
-30℃——+60℃
Enclosure
Aluminum alloy
Protection class
IP67
Dimension(HxWxDepth)
320x219x104mm
Weight
3.9kg
85-265VAC, 50/60HZ
48VDC • 24VDC
Typical System Application
45<H<90M
H≤45M
OM2B-A
OL10D
OL32D
OL32S
OL10S
OL32S
45M<H<105M
OL32S
OL10S
JB
JB
BTS
BTS
BTS
Alarm
Alarm
Power
Alarm
Power
Alarm mornitoring in BTS
Obstruction light system for telecom
tower ≤ 45 meters
Power
T90-OL101D2SC 48VDC obstruction
lighting system for 45-90m tower
TK90A solution: Steady Medium
intensity system
double obstruction lighting system
Functions & features
• Control one low intensity double light on the
top
• Under “service+standby” system, configured
transfer relay in the control box, in case of
service lam failure, will transfer to standby
lamp
• In “Service+service”type, either failure will
output signal to the control box
• One unit of OL10D double light on the top
• Two units of OL10S single lights on 1/2 or 2/3
height of tower
• OL10D double and OL10S single lights are
integrated into one junction box
• Alarm output for double light
• Alarm output for single lights level
• Alarm output for power supply
• Photocell auto switch on/off the tower
obstruction lighting system from dusk to
dawn
The height of structure more than 45meter but
less than 105m, should install medium intensity
on the top level and low intensity at the
intermediate level
• Top level : 1 or 2 units medium
intensity(OM2B-A) red Steady
• Intermediate level : 3 units L-810 low
intensity(OL32S) red steady burning, or 4
units if square tower
Note:
• Each level will be alarmed independently
• Any OB light of Each level failure will output
alarm signal to control box
Wiring method
Please connect the power cord according to the label
instruction
1
2
3
N
4
L
5
NULL
Poewr
6
N
7
L
8
N
Lamp1
L
9
10
NULL
11
N
Lamp2
L
Lamp3
12
N
13
L
15
Com NC
Lamp1 Alarm
16
17
18
Com NC Com
19
20
21
NC Com NC
22
Com
Lamp2 Alarm Lamp3 Alarm Lamp4 Alarm Power
23
AL:4
NO:3
AL:3
NO:2
AL:2
NO:1
AL:1
Charging
Power
Power off
Auto Operation
Lamp4
Photocell - photocell control terminal
“Power” - controller power input
Lamp1, Lamp2, Lamp3, Lamp4 - connect to aviation
obstruction light separately
14
NO:4
24 25
NULL
NO:1, NO:2, NO:3, NO:4 are 4 aviation
obstruction light indicators individully.
26
Green light means working fine. Red light AL1,
AL2, AL3, AL4 means corresponding light has
failed.
NC
Alarm
Photocell
Lamp1 Alarm, Lamp2 Alarm, Lamp3 Alarm, Lamp4 Alarm output alarm terminal
• Please make sure all wiring job are correct.
Connecting the power supply, then the
controller will start to work
43
CTR04B Obstruction Light
Control Box
CTR04B control box is an updated microprocessor outdoor controller device for monitoring and controlling obstruction lights, mostly for telecom, GSM, Microwave and TV towers.
Compare with CTR04A, CTR04B have more friendly LED monitoring display, Both NO and NC alarm
contacts are available.
Features
MECHANICAL
• Aluminum alloy Enclosure, IP67, outdoor type, good corrosion resistance
• Circuit breaker switch, surge protection and terminal block are suitable for DIN rail mounting
• The enclosure door is secured by four captive screws
• Supplied with PG13.5 cable glands
• Four threaded mounting holes in the back of control box, suitable for attaching to any vertical
surface or rack mounting.
ELECTRICAL
• Control up to four channels light output, each channel control one medium intensity LED beacon
or up to four L-810 low intensity LED single obstruction light.
• Both NO and NC alarm contacts are available
• Overvoltage protection and MOV surge protection
• Circuit breaker protection and fuse protection
Specifications
Parameter
Input Voltage
•
•
Power consumption
10W
Flash rate
70/100Lux
range
-30℃~+60℃
Enclosure
Aluminum alloy
Protection class
IP67
320x219x104mm
Weight
3.9kg
85-265VAC, 50/60HZ
48VDC • 24VDC
CTR04-B20 Obstruction
Light Control Box
Based on CTR04B, CTR04-B20 control box is designed with backup battery, which can support
REDDOT OL32 double obstruction light(Service+Standby) 20 hours of autonomy once the main power
supply fails.
Features
MECHANICAL
• Built-in transfer relay for OL32 double light(service+standby)
• Dry contact alarm output for light, power and battery
• Both NO and NC alarm contacts are available
• Surge protection for both input and output
• Transient overvoltage protection and over-discharge protection
Application
• For Double Obstruction light system
Specifications
Description
Parameter
Input voltage
85-265VAC, 50/60Hz
Output voltage
48VDC
Backup time with
REDDOT light
20 hours
1 OL32 double light
(Service+Standby)
Flash rate
70/100Lux
Operating temperature range
-30℃~+60℃
Enclosure
Cold-Rolled steel sheet,
Ral-7035 Electrostatic Polyester
Protection class
IP65
500x400x208mm
Weight
32kg
20 hours
1 OL32 double light
(Service+Standby)
• PHC01 Photocell
• OL32D Double Light
45
CTR04-AIDO Control box
CTR04-AIDO is specially designed for voltage AC input and DC output outdoor controller installation,
to control and monitor aviation obstruction lighting system.
CTR04-AIDO control box employs MCU IC control technology. With a pre-programmed software,
control up to 4 ways aviation obstruction lights. In case of any medium intensity beacon or any level of
low intensity sidelights failure, will send alarm signal to the controller and then output to remote monitoring system.
A photocell is deployed within the controller system, which can turn on/off the system from dusk to
dawn automatically, easy for maintenance and trouble shooting. Once the photocell fails, all lights in the
system will be on in a safe status.
Features
• Designed for AC100-240V input voltage and DC48V output obstruction lighting
system
• Control up to three medium intensity beacons and 1 level of up to 4 units of low
intensity single obstruction lights, also suitable for only single or double obstruction lighting system.
• Dry contact alarm relay for power supply, flasher, beacon, markers, photocell
• LED indicators in control board to indicate lights, power, photocell operation
status
• Alarm relay for each sidelight level
• Alarm relay for each beacon
• Auto/manual mode control switch
• Alarm signal output, easy for connecting remote alarm monitoring device
• Combined with REDDOT PHC01photocell, which can turn on/off the system from
dusk to dawn
• Surge protedtor for input and output
Specifications
Description
Parameter
Input power voltage
100-240VAC(50/60HZ)
Output operation voltage
48VDC
Surge protector
65KA/2.5KV
Protection class
IP65
Material (Two options)
Cold-Rolled steel sheet,
Ral-7035 Electrostatic Polyester
-30C°-+60C°
30/70Lux
Dimension
400mm*300mm*150mm
Weight
8KG
Cold-Rolled steel sheet
• Inside view
• PHC01 Photocell
• OL32D Double Light
Typical System Application
T45-D
T45-2S
T90-XMYS
H≤45M
OL32D
H≤45M
OL32S
OM2B-A
45M<H<105M
OL32S
OL32S
JB
OL32S
OL32S
JB
BTS
Alarm
BTS
Alarm
Power
BTS
Alarm
Power
Power
1 double obstruction lighting system
2 single obstruction lighting system
• Control one low intensity double
light on the top
• Under “service+standby” system,
configured transfer relay in the
control box, in case of service lam
failure, will transfer to standby
lamp
• In “Service+service”type, either
failure will output signal to the
control box
• Control two low intensity single
lightson the top
• Under “service+standby” system,
configured transfer relay in the
control box, in case of service lam
failure, will transfer to standby
lamp
• In “Service+service”type, either
failure will output signal to the
control box
1 medium intensity beacon+3 or 4
single low intensity obstruction
lights
• One medium intensity light on the
top and 3 or 4 single low intensity
light on 1/2 or 2/3 height of tower
• Alarm output for each medium
intensity beacon
• Alarm output for each low intensity level
Wiring method
Please connect the power cord according to the label
instruction
1
2
3
N
4
L
5
NULL
Poewr
6
N
7
L
8
N
Lamp1
L
9
10
NULL
11
N
Lamp2
L
Lamp3
12
N
13
L
15
Com NC
Lamp1 Alarm
16
17
18
Com NC Com
19
20
21
NC Com NC
22
Com
Lamp2 Alarm Lamp3 Alarm Lamp4 Alarm Power
23
AL:4
NO:3
AL:3
NO:2
AL:2
AL:1
NO:1
Charging
Power
Power off
Auto Operation
Lamp4
Photocell - photocell control terminal
“Power” - controller power input
Lamp1, Lamp2, Lamp3, Lamp4 - connect to aviation
obstruction light separately
14
NO:4
24 25
NULL
NO:1, NO:2, NO:3, NO:4 are 4 aviation
obstruction light indicators individully.
26
Green light means working fine. Red light AL1,
AL2, AL3, AL4 means corresponding light has
failed.
NC
Alarm
Photocell
Lamp1 Alarm, Lamp2 Alarm, Lamp3 Alarm, Lamp4 Alarm output alarm terminal
• Please make sure all wiring job are correct.
Connecting the power supply, then the
controller will start to work
47
Other
•
•
•
•
OMARK Obstruction Marking Sphere
•
Accessories for Aviation
Obstruction Lighting System
OMARK Obstruction
Marking Sphere
Aviation obstruction marking sphere is designed to provide daytime visual warning of electricity
transmission line for aircraft pilots, especially cross river high voltage transmission lines.
A marker should be of one colour. When installed, white and red, or white and orange markers should be
displayed alternately. The colour selected should contrast with the background against which it will be
seen.
Functions&Features
•
•
•
•
•
•
•
•
Not easy to break during transportation & installation
Super corrosion resistant character, stainless steel bolts and nuts
Aluminum alloy cable clamp guarantees good corrosion resistance
Various size of cable clamps are available to fit into customers’ cable conductor
Drain holes structure can prevent accumulated rain water inside the spheres
Stacking compatible design, save storage space and freight charge
Optional Preformed Armor Rods prevent the spheres slipping from the conductor
Optional Reflective strip for night visibility
Application
• Power transmission Line
Standard
• FAA AC 70/7460-1K, obstruction Marking and Lighting
48
Specifications
Operation
Visible Distance
1200 meters
Voltage Range
35KV-1000KV
Conductor diameter
6.5-55mm
.0
Ø600
Mechanical structure
Color
Orange, Red, White, Orange/White, Red/White
Sphere body
FRP(Fiberglass Reinforced Polyester)
Cable clamp
Aluminum alloy
Bolts/nuts/washers
Stainless steel 304
Diameter
600mm
Weight
6.9KG
Thickness
3mm
Drain holes
Yes
Optional
•
150
700
Preformed Armor Rods
• Reflective Strip
Warranty
2 Years
Ordering Code
Series
Diameter Color
OMARK 600mm
O(Orange)
Cable diameter(mm)
___.___
Armor Rods
AR
Reflective Strip
RS
R(Red)
W(White)
O/W(Orange/White)
R/W(Red/White)
or Example, OMARK600O13.1AR means a 600mm diameter warning sphere, orange color, with preformed
armor rods, suitable for diameter 13.1mm cable conductor.
Note :
For guarantee the spheres can fit for cable conductor well, customers need to provide cable diameter,
cable material and code.
Single light mounting kit parts list
Ref No DESCRIPTION
1
Single lamp
2
Gasket
3
Fixed board
6mm washer
4
5
6mm spring washer
M6 hex nut
6
7
3/4"joint
8
Cable waterproof joint (PG13.5)
10
1
11
2
12
3
13
4
5
6
15
7
8
16
9
AKU80
Mounting kit for 30-80mm vertical or horizonal pipe
AKU60
Mounting kit for 30-60mm vertical pipe
14
9
10
11
12
13
14
15
16
M8 hex nut
M6 × 25 hex bolt
Support clip
8mm spring washer
8mm washer
M8 U-bolt
M6 Trapezoidal card
Pipe
MATERIAL
Silicon
SUS #304
SUS #304
SUS #304
SUS #304
SUS #304
PA66
SUS #304
SUS #304
SUS #304
SUS #304
SUS #304
SUS #304
SUS #304
QUANTITY
1
1
1
2
2
2
1
1
4
1
1
4
4
1
1
1
AKU100
AKU150
Mounting kit for 100-150mm vertical pipe
50
Assembly & wiring diagram
Single light
Wiring Diagram
4
To Control box
3
2
5
TB1-1 TB1-2 TB1- 3 TB1- 4TB1- 5
TB1
1
IF DC
NO
DC12V~60V COM
IF AC
AC85V~265V
L
NOTE:The part within
dotted line is only applicable
when the light comes with
"alarm relay" optional
function
N
Single lamp explosion figure
Ref No
DESCRIPTION
No.Requ'd
1
2
Base
3
Bolt components M6 x 30
1
1
3
Safety rope
4
Lamp-chimney
5
Control Board Power Cord
Figure 2. Single light assembly & wiring diagram
1
1
Double light
CN1
1
3
CN5
CN5-4: ＋
CN5-3: －
CN1-4: COM COM
CN1-3: NO
NO
CN1-2: L
＋
N
－
CN1-1:
5
L
N
CN5-2: NO NO
CN5-1: COM COM
4
IF IF
DC AC
IF IF
AC DC
2
Wiring Diagram
5
To Control box
1
TB1
Double lamp explosion figure
Ref No
DESCRIPTION
No.Requ'd
1
2
"Working" Light Terminal
Single lamp
Bolt components M5x 10
1
1
4
Cover
"Stand-by" Light Terminal
1
1
3
4
5
IF DC
IF AC
TB1-1 TB1-2 TB1- 3 TB1- 4TB1- 5
DC12V~60V
L
NOTE:The part within
dotted line is only
applicable when the light
comes with "alarm relay"
optional function
COM NO
N
AC85V~265V
Figure 3. Double light assembly & wiring diagram
52
Accessories for Aviation
Obstruction Lighting System
ghai Red
an
ANTY
WARR Y
POLIC
Sh
Warranty Policy
Co., Ltd
ics
t Electron
do
REDDOT products are warranted to be free from
manufacturing defects in materials and
workmanship starting from the date of delivery.
The actual warranty period of the product depends
on the product category.
Limitation of Liability
The provisions of the warranty are in lieu of any other warranty, whether expressed or implied, written
or oral. REDDOT's liability arising out of the manufacture, sale, or supplying of the product and its use,
whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the
original cost of the product. In no event shall REDDOT be liable for unintended or consequential
damages, including, but not limited to, a loss of profits or use damages arising out of the manufacture,
sale, or supplying of the product.
Replacement
• Due to the high rate of international air transportation and custom clearance paper works, we may
not require customers to return products as long as the customer could provide enough materials of
the incorrect product. In that case, REDDOT will send out replacement product once our QC approved
the application.
• Before returning a REDDOT product, please provide information like model, quantity, your region, and
product photo or situation statement of the product in order to get quicker service. Please contact
[email protected], or contact with individual sales person.
Warranty Periods
Products Category
Warranty Period
Light & control device
5 Years
Solar panel
10 Years
2 Years
Accessory
1 Years
Note
• Please make sure connect the product according to the wiring diagram on the category.
• For products containing rechargeable battery, REDDOT normally give 2 years warranty on the
battery unless there is specific stating on the product’s category.
• For products containing solar panel & rechargeable battery, the battery’s power may reduce to
insufficient level during storage and transit. In this case, please first put the product under sunlight at
daytime for several days for battery charging purpose.
• Product warranties remain valid provided the product was properly installed and used. Defects,
malfunctions, or failures of the warranted product caused by damage resulting from acts of God (such
as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as power
line disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling,
and damage caused by misuse, abuse, and unauthorized alteration or repair, are not warranted.
• For large order projects, customers may purchase an extended maintenance contract. Some parts
may have a limited warranty from the original supplier of the parts. Please contact Reddot's sales
department if you would like to extend the maintenance period of a REDDOT product.
For customers
Thank you for taking the time to read our products!
If you are interested on any REDDOT product, please don’t hesitate to contact us. Our sales people will
come back to you at first time.
For better understanding for the right product you are looking for, or the type of solution you will need,
we recommend that you state your situation as much as possible, for example :
• Which industry the product will be applied to, telecom industry, tall building, etc
• Which position the product will be applied to, a 60 meters telecom tower, etc
• Any key functions must be included in the product, relay type alarm output, etc
• Any special industrial regulations that must be followed, Transport Canada rules, Australia CASA
rules, etc
• Others like the region you are from, your project budget, your project dead-line, etc
In some region, we have distributor already. In such case, we will forward your request to our distributor.
Our distributor can support you better locally.
Any other questions please don’t hesitate to contact us, we will be more than happy to assist!
For distributors
REDDOT welcome distributors that have expertise knowledge to sell our product. If you are interested
on distributing REDDOT product in your region, please send email to us for further discussion. You can
state your interest, together with background information like:
• Concentrating industry
• Interested areas
• Interested products
• preferred commercial terms, etc
REDDOT Sales Contact
Distributor Contact

ReddotSignal Product Brochure

Transcription

Similar documents

Light Options – There are 3 dual LED strips in the

Range of human hearing, Loudness, Decibel scale and Doppler Effect.

PDF file

Tokelau Renewable Energy Project

cardiovascular exercise - Kettering Health Network

Garrett SuperWand - Garrett Metal Detectors

Pole Mounted Obstruction Light

NAUTICO UTICO 3 NAUTICO UTICO 3

318CTB - RCS: Remote Control Solutions