products especially designed to eliminate noise and vibration on

PRODUCTS ESPECIALLY DESIGNED TO ELIMINATE
NOISE AND VIBRATION ON VEHICLES
URE-FOAM
URE-FOAM EXPANDABLE
FOAM –ACOUSTICAL
unique two-component expandable soft
foam designed to eliminate panel flutter,
water leaks, wind and noise; duplicates
OEM sound deading on sheet metal.
Expands in 30 seconds. Available in dark
gray and beige.
Part No.
P10601
P10630
KT13608
KT13609
Color
Size
Dark Gray
Dark Gray
Beige
Beige
10 oz.
1.7 oz.
7 oz.
1.7 oz.
URE-FOAM
EXPANDABLE FOAM
–ACOUSTICAL DELAYED RELEASE
60-90 second delayed expansion twocomponent expandable soft foam designed
to eliminate water leaks, water and noise;
duplicates OEM sound deadening on sheet
metal. Available in dark gray and beige.
Part No.
KT13670
KT13671
KT13668
KT13669
Color
Size
Dark Gray
Dark Gray
Beige
Beige
7 oz.
1.7 oz.
7 oz.
1.7 oz.
PILLAR
FOAM
RIGID
FOAM
2-PART
PILLAR FOAM
–ACOUSTICAL EXPANDABLE
Hard urethane foam designed to reinforce
and eliminate wind noise and panel flutter;
duplicates OEM hard foam off-white color
and appearance. Delayed 60-90 second
release allows material to fill entire pillar
before expanding.
RIGID FOAM EXPANDABLE FOAMACOUSTICAL EXPANDABLE
Hard urethane foam designed to reinforce
and eliminate wind noise and panel flutter;
duplicates OEM hard foam off-white color
and appearance. Outperforms ordinary onepart aerosol foams without opening welds
or distorting panels. 30 second expansion.
SOUND DEADENER-TWO PART
A two-part sound deadener designed to
reduce noise and vibration. For use in
narrow gaps where pads and foams cannot
be used or where 60 minute work time
is needed.
Part No.
Part No.
Part No.
KT13672
KT13673
Size
10 oz.
1.7 oz.
SOUND DEADENER
Size
P10612
P10625
10 oz.
1.7 oz.
SOUND DEADENER PADS
KT13523
Size
10 oz.
CARTRIDGE GUN
STANDARD BLACK
SOUND DEADENER PADS
Specially designed to eliminate the
“tinny” sound of replacement body panels.
Restores the original sound deadening
qualities on replacement body sheet metal
that comes without sound deadening material.
Part No.
Size
Qty
P20617
6 x 6”
FLOOR SOUND DEADENER PADS
P32947
12 x 12”
Replaces factory counterparts during
KT13305
29
x 32”
collision repair, or adds sound deadening to
existing parts. Can be applied under interior
ALUMINUM-BACKED
carpets, under rear seatrs and trunk floors.
SOUND DEADENER PADS
20
10
2
Part No.
Size
Qty
6 x 24”
12
P90225
Size
Qty
3
1
/
/
8 4 x 18 x 8” thick 10
Part No.
KT13306
DUAL CARTRIDGE GUN
Ideal for quickly applying Kent two-part
sound deadening products in 10 oz. or
7 oz. dual cartridges. Job Size Gun also
available for 1.7 oz. dual cartridges.
Part No.
P33705
P90378
For Cartridge
7 & 10 oz.
1.7 oz.
SOUND DEADENING TYPICAL APPLICATIONS
ROOF BOWS
2-Part Sound Deadener, Ure-Foam
SAIL PANEL
Rigid-Foam
ROOF SKINS
Sound Deadener Pads
A-PILLARS
Pillar Foam
TRUNK FLOORS
Sound Deadener Pads
B-PILLAR
Rigid-Foam
FIREWALL
Sound
Deadener
Pads
INNER FIREWALL
Sound Deadener Pads
FRAME RAILS
Rigid Foam,
Ure-Foam
HOOD
2-Part
Sound Deadener,
Ure-Foam
GAS FILLER NECK
2-Part Sound Deadener, Ure-Foam
FLOOR PAN
Sound Deadener Pads
DOOR BEAM
2-Part
Sound Deadener,
Ure-Foam
INNER QUARTER PANELS
Sound Deadener Pads
DECK LID
2-Part
Sound Deadener,
Ure-Foam
DOOR SKINS
Sound Deadener Pads
www.kent-automotive.com
1.800.654.6333 • Technical Services 1.888.YES.KENT
1666 E. Touhy Ave. • Des Plaines, IL 60018
Confidential Material, Reproduction in Whole or in Part Prohibited
Printed in USA • 6/06 • E-424K