Goyen Series 4

Goyen Series 4
Reverse Pulse Jet Pulse Valve
4 Series
OVERVIEW....
Application
The extremely rapid response, and
very high flow rate delivered by the
4 Series diaphragm valves makes
this product especially suitable for
reverse pulse jet filter cleaning.
This high performance valve may
be used for new dust collector
builds or to replace existing ¾”
and 1” valves in a dust collector
refurbishment.
Application
Typical examples:
- fabric filters
- pleated filters
- Panel filters
- Manufacturing
- Power generation
- Mining
- Resources
- Steel and cement
4 Series
FEATURES
No more spring failures!
Shockwave diaphragm
 Integrated spring.
 Proprietary engineering
thermoplastic elastomer
blend for consistent
performance throughout the
temperature and pressure
range.
 Environmentally endurance
tested at the extremes.
The coupling method of your choice
Threaded
Available with ¾” and 1” ports
 The classic Goyen dresser
nut coupling design.
 FS - Flange and Slide Seal
 Threaded connections.
FS
Dresser nut
 Nitrile or viton seals.
Which repair kit? No problem!
Integral kit markings
 The 4 Series valve is marked
with the appropriate
diaphragm replacement kit
part number.
 No more searching
catalogues or calling to find
the right kit. Simple!
2-in-1: Integral or remote solenoid.
RCA3PV
 Using the RCA3PV Series, or
RCA3DM Series pilots, the 4
Series valves can be easily
configured for integral
piloting.
 RCA3PV: DIN connections,
ATEX options, CE, Low Cost.
RCA3DM
 RCA3DM: Goyen Q Coil
voltage and connection type
range with CSA*
* CSA from June 15, 2012
4 Series
QUALITY
Quality starts with Design...
15 – 40% higher peak pressure than
equivalent older ‘2’ Series models.
Consistent pulse profile, regardless of
pressure.
... And then includes execution.
World class manufacturing facility,
Quality Systems certified and audited
to international standards for design
and manufacture.
Each valve fully checked for operation
and sealing performance.
4 Series
DIMENSIONS
RCAC25 & RCAC20 MODELS
RCAC25DD4:
Dimensions in mm [inches]
RCAC20DD4:
RCAC25T4:
Dimensions in mm [inches]
RCAC20T4:
RCAC20ST4:
RCAC25FS4:
Dimensions in mm [inches]
RCAC20FS4:
4 Series
DIMENSIONS
RCA3PV & RCA3DM PILOT MODULES
RCA3PV
Dimensions in mm [inches]
RCA3DM
4 Series
PERFORMANCE
Kv and Cv values
4 Series
INSTALLATION REQUIREMENTS
Operating Conditions
Metric
US/Imperial
Supply compressed air
pressure range
0.3 to 8.6 Bar
4.35 to 124.7 PSI
Compressed air temperature
(Shockwave diaphragms)
-40ºC to 82ºC
-40ºF to 180ºF
Compressed air temperature
(Viton diaphragms)
-40ºC to 232ºC
-40ºF to 450ºF
Media type
Air or inert gases only.
Remote pilot connections
Minimum pilot tube bore: 4mm (0.16”)
Maximum length: 2m (79”)
4 Series
HOW TO ORDER
RCAC25 & RCAC20 MODELS
¾” Valves
RCAC20
__
__
__
__
Diaphragm type:
1 – Viton
2 – Shockwave
Pilot Port :
Thread
0 – NPT
1 – Rc
2–G
Pilot Port :
Size
0 – 1/8”
1 – 1/4”
Inlet/Outlet style:
T4 – Threaded
ST4 – Stub Thread
DD4 – Dresser nut
FS4 – Flange in/ Slide Seal out
The ‘4’ means this is a fourth generation pulse jet valve.
1” Valves
RCAC25
__
__
__
__
Diaphragm type:
1 – Viton
2 – Shockwave
Pilot Port :
Thread
0 – NPT
1 – Rc
2–G
Pilot Port :
Size
0 – 1/8”
1 – 1/4”
Inlet/Outlet style:
T4 – Threaded
DD4 – Dresser nut
FS4 – Flange in/ Slide Seal out
The ‘4’ means this is a fourth generation pulse jet valve.
4 Series
HOW TO ORDER
PILOT MODULES
RCA3PV integral pilot:
RCA3DM integral pilot:
RCA3DM solenoid choices:
RCAC25DD4 Series
SERVICING
Repair kit details
Diaphragm replacement kit
numbers are marked on the
diaphragm, visible before
disassembly.
Shockwave assembly
Viton assembly
Valve & Pilot service kit codes
Valve model
Shockwave
Viton
Nitrile
RCAC20T4
RCAC20ST4
K2034
K2033
N/A
RCAC20DD4
DRESSER SEAL KIT
K2034
N/A
K2033
K2009
N/A
K2008
RCAC20FS4
OUTLET SEAL
K2034
N/A
K2033
G690338-2
N/A
G690338
RCAC25T4
K2546
K2551
N/A
RCAC25DD4
DRESSER SEAL KIT
K2546
N/A
K2551
K2507
N/A
K2508
RCAC25FS4
OUTLET SEAL
K2546
N/A
K2551
G690763-2
N/A
G690763
RCA3DM
N/S
K0384
K0380
RCAC25DD4 Series
APPROVALS
Approvals
Under the treaty of establishing the European Economic
Community, the council of European Communities adopted
into law a series of directives to harmonize technical
standards.
The 4 series valves are controlled by
European Directive (CE)
Council
Directive #
Machinery
89/392/EEC
PED
97/23/EC
When used in combination with Goyen or Mecair solenoids, these
valves are also controlled by
Council
Directive #
EMC
89/336/EEC
Low Voltage
72/23/EEC
The Goyen 4 Series valves and its compatible Goyen solenoid
pilots comply with these directives, and bear the CE approval mark
on the solenoid and/or valve cover.
Approvals
The Goyen 4 series may be used with any of the Goyen or
Mecair remote pilot enclosures.
Hazardous areas
These enclosures include products with UL, CSA, and ATEX
certifications to meet the applications of
CSA:
Class I, Group D
Class II, Groups E, F, G
UL:
Class I, Group D
Class II, Groups E, F, G
ATEX:
II 2 G D (Ex d IIB T3 Gb)
II 2 G D (Ex d IIB T6 Gb)
Please refer to the Goyen or Mecair literature for further information
on these enclosures.
Goyen Series 4
Reverse Pulse Jet Pulse Valve