docGolf Club Shafts
download 
Report Transcription
Golf Club Shafts
0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/30/08 6:13 PM Page 142 SHAFT PUREing® w Sha PUREing® Service Description Code PUREIN Individual Shaft PUREing® 1-3 $13.99 4+ $11.99 $16.99 $14.99 (New, In-stock shafts purchased from The GolfWorks) PURENS Individual Shaft PUREing® (New, Un-cut, non-stock shafts not purchased from The GolfWorks) PURECS Individual Shaft PUREing® $25.99 $23.99 (Cut shafts removed from clubheads and sent to The GolfWorks) PURERT Complete Shaft PUREing® $49.99 $45.99 (Complete clubs sent to The GolfWorks, requiring dis-assembly and re-assembly) Individual shaft PUREing service orders will ship within 48 hours of receipt of orders on in-stock shafts! SST PURE®, SST PUREd®, retro-PURE®, PURE®, Pured®, PUREing®, The Pros Competitive Edge® and Every Golf Shaft Has a Sweet Spot® are registered trademarks of Strategic Shaft Technologies, LC, Jupiter, Florida. 142 Call Toll Free: 800.848.8358 It is not possible to align screen logos on graphite or steel shafts when installing PUREd shafts. The PUREing process may result in screen logos not being uniform in location. This condition is a distinct indication that the clubs have been PUREd. The GolfWorks performs dis-assembly, PUREing and re-assembly of complete clubs. This complete club shaft PUREing service includes a new grip (please specify type of grip when ordering). Cord and Winn grips cost an additional $3.50 per club. Available original O.E.M. grips are an additional $5.00. Individual shaft PUREing service orders will ship within 48 hours of receipt of orders on in-stock shafts. Complete club PUREing service requires 5-7 days before shipping. For additional information about PUREing services, contact The GolfWorks at 1-800-848-8358. 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/23/08 5:25 PM Page 143 MPF SHAFT RATINGS TO USE THE A GOLFWORKS EXCLUSIVE! MALTBY SHAFT PLAYABILITY FACTOR MPF SHAFT RATINGS follow these 5 simple steps: 1 Determine the appropriate shaft flex code, based upon known driver clubhead speed or the club the player uses to carry the ball 150 yards: Club Choice Driver SPF From Clubhead Flex 150 Yards Speed Code 3, 4-iron or 60-69 mph 1 fairway wood < 69 mph 5-iron 70-81 mph 2 6-iron 82-93 mph 3 7-iron 94-105 mph 4 8, 9-iron, 106+ mph 5 or wedge 2 Indicate whether the player is seeking a shaft that adds distance, control or a balance of both: Features Weight Code Distance D Control C Both B 3 Select the preferred trajectory for the player: Trajectory Trajectory Code Lower 1 Medium 2 Higher 3 4 Choose whether the player needs help in correcting a hook, a slice or no correction required: Correction Correction Required Code Slice S None M Hook H 5 Tally the results to determine the player’s Shaft MPF. In this case: The most simple and effective shaft selection system in clubmaking! The GolfWorks Technical Staff has fully analyzed every shaft in our 2009 Clubmakers Catalog. The following Shaft Playability Factor rankings will allow clubmakers to narrow shaft selection based on the overall performance characteristics required for a player. It is no secret that little standardization exists within the shaft industry. Flexes differ by manufacturer, torque ratings are not uniformly measured, flex points vary from design to design. Shaft Playability Factor removes much of the guesswork from shaft fitting by recommending a range of shaft choices for each specific swing speed and shotmaking need. Shaft flex, weight, torque, bend point and tip Years of trials, testing and research were necessary to create clubmakstiffness have all been accounted for in ing's definitive shaft rating system grouping various shafts in specific Shaft Playability Factor groups. While the final choice of shaft selection still lies with the clubmaker and the golfer, Shaft Playability Factor provides a significant advance in not only pairing the player with the right shaft, but actually helping the player correct some swing deficiencies through more advanced shaft fitting. 4B2M Now, just look up this code on the following chart to see what shafts match this Shaft MPF. woods Shaft MPF Flex Pg. Shaft MPF Flex Pg. Shaft MPF CER 75 ACD Graftech GT 65 Graftech Lite NV Pink 55 Sakura DM Low Torque KE4 V ProForce V2 55 G-Tech DM Lite ProLaunch Blue 45 Axivcore 59 Blue Competition Series Xcaliber 5 Gamer Pershing 55 ProForce Ladies Aldila Low Torque Aura 60 Competition Pro L-Tech L-Tech MPF Distance ProCustom ProForce V2 55 ProForce V2 High Launch 1B2M 1B2M 1B2M 1B2M 1B2M 1B3M 1B3M 1D3S 1D2M 1D2S 1D2S 1D3M 1D3M 1D3M 1D3M 1D3M 1D3M 1D3S 1D3S 1D3S 1D3S 1D3S 1D3S 1D3S 1D3S 1D3S L L L L L L L L L L L L L L L L L L L L LL L L L L 50L 151 153 153 171 179 152 150 159 177 152 167 157 162 175 172 177 161 172 176 162 151 151 149 163 159 159 Value Series E150 CER 65 ACD CER 75 ACD CER FW70 DM UL Gamer Graftech Lite Graftech GT 65 NV 55 NV Pink 55 NVS 55 Powercoil 50 ProForce ATR ProForce V2 ProForce V2 High Launch ProLaunch Blue 55 ProLaunch Platinum Trouble Out Fairway Xcaliber 6 Xcaliber Fairway DM Low Torque MPF Fairway Saishin G-Tech Graftech GT 55 1D3S 2B1M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B3M 2B3M 2B2H 2D2M 2D2M L A/R2 A A A A A A A A A A A A 55A 50A A A A A A A A A/R2 A A 172 179 151 151 151 152 172 153 153 171 171 170 178 161 159 159 167 165 151 175 175 152 149 179 177 153 DM Lite 2D2S N-Gage 55 2D2S Pro Launch 45 2D2S Pro Launch Fairway 2D3H Advent UL 2D3M Aura Blue 65 High Launch 2D3M Aura Golf 65 Mid Launch 2D3M Axivcore 59 Blue 2D3M Competition Series 2D3M E160 2D3M KE4 Red 60 2D3M KE4 75 2D3M KE4 V 2B3M MPF Fairway 2D3M ProLaunch Blue w/Axis Tech 2D3M ProLite 35 HL 2D3M Saber High Vector 2D3M SL Ultralite 2D3M Xcaliber 5 2D3M ProLaunch Blue 45 2D2S Competition Series Pro 2D3S L-Tech 2D3S MPF Distance 2D3S ProCustom 2D3S Value Series 2D3S ProLaunch Blue Fairway 2D3H Flex A A A A A A A A A A/R2 A A A A A A A A A A A A A A A A Pg. Shaft 152 172 167 167 154 176 176 157 162 179 150 150 150 149 165 163 166 154 175 167 162 151 149 163 172 167 MOI Proto 3B1H NV 75 3B1H Pro Jec TW6830 3B1H ProLaunch Red Fairway 3B1H Saber MOI 3B1H DM Fairway 3B1M IROD Hybrid .335 3B1M Javlnfx 63 3B1M Javlnfx 73 3B1M N-Gage 65 3B1M ProForce Classic Series 65 3B1M ProForce Classic Series 75 3B1M Pro Jec TW6535 3B1M ProLaunch Red w/Axis Tech 3B1M ProLaunch Red 3B1M ProLite 35 3B1M Tour AD YS-Q 65 3B1M VooDoo 60 3B1M VooDoo 75 3B1M Epic Fairway 3B2H Maltby Pro Launch 65 3B2H NV 85 3B2H NVS 75 3B2H Pershing 65 3B2H Pershing 75 3B2H ProForce V2 65 3B2H Go To: www.golfworks.com — Open 24 Hours Per Day! MPF Flex Pg. R R R R R R R R R 65R R R R R R R 65R R R R R R R R R R 169 171 155 166 166 152 162 173 173 172 161 161 155 165 166 163 177 169 169 163 165 171 170 177 177 159 143 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/23/08 5:46 PM Page 144 MPF SHAFT RATINGS MPF SHAFT RATINGS woods continued Shaft MPF ProForce V2 75 3B2H ProLaunch Blue 65 3B2H ProLaunch Blue 75 3B2H ProLaunch Platinum Tour 753B2H Saishin 3B2H VS Proto 60 3B2H VS Proto 70 3B2H Aura Gold 65 Mid Launch 3B2M Axivcore Blue 69 3B2M CER 65 ACD 3B2M CER 75 ACD 3B2M CER FW70 3B2M Command 3B2M Competition Series 3B2M DM UL 3B2M DVS 60 3B2M E160 3B2M Gamer 3B2M Graftech Lite 3B2M Graftech GT 55 3B2M Graftech GT 65 3B2M G-Tech 3B2M Javlnfx V-Series 65 3B2M KE4 Red 60 3B2M KE4 V 3B2M Maltby CT250 3B2M Maltby CT250 Fairway 3B2M MPF Fairway 3B2M MPF MOI 3B2M NV 55 3B2M NV 65 3B2M NV Pink 65 3B2M NVS 55 3B2M NVS 65 3B2M Pershing 3B2M Powercoil 50 3B2M Powercoil 65 3B2M Pro Launch Blue 55 3B2M ProForce ATR 3B2M ProForce V2 55 3B2M ProForce V2 High Launch 3B2M ProForce V2 High Launch 3B2M ProForce V2 High Launch 3B2M ProForce V2 LD 3B2M ProForce M3 3B2M ProForce M3HL 3B2M ProLaunch Platinum 3B2M Pro Wound 50 3B2M Pro Wound 70 3B2M Saber 3B2M SL Ultralite 3B2M SteelFiber 65 3B2M SteelFiber 75 3B2M Trouble Out Fairway 3B2M TT Lite XL 3B2M YS-5+ 3B2M YS-6+ 3B2M Xcaliber 6 3B2M Xcaliber 6+ 3B2M Xcaliber Fairway 3B2M Competition Series Pro 3B2S N-Gage 55 3B2S Pro Launch 45 3B2S Value Series 3B2S ProLaunch Fairway 3B3H Axivcore 59 Blue 3B3M Axivcore 69 Blue 3B3M DM Low Torque 3B3M Epic 3B3M KE4 75 3B3M Maltby MPF 3B3M 144 Flex Pg. Shaft MPF Flex Pg. R R R R R R R R R 65R 75R R R R R 60R R R R R 65R R R R R R R R R R R R R R 55R R R R R R 50R 60R 70R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 159 167 167 165 179 169 169 176 157 151 151 151 182 162 152 169 179 172 153 153 153 177 173 150 150 150 150 149 149 171 171 171 170 170 177 178 178 167 161 159 159 159 159 160 160 160 165 154 154 166 154 178 178 151 182 177 177 175 175 175 162 172 167 172 167 157 157 152 163 150 149 ProCustom 3B3M Tricept 55 3B3M Xcaliber 5 3B3M Dynamic Gold SL 3C1H Dynamic Gold 3C1M Dynamic Gold Sensicore 3C1M DM Lite 3D2S Advent UL 3D3M Aura Blue 65 High Launch 3D3M E150 3D3M ProLaunch Blue w/Axis Tech 3D3M ProLite 35 HL 3D3M Saber High Vector 3D3M Aldila Low Torque 3D3S MPF Distance 3D3S MOI Proto 4B1H NV 75 4B1H NV Protopype 70 4B1H Axivcore 69 Tour Red 4B1H Pro Jec TW6830 4B1H Saber MOI 4B1H VooDoo 75 4B1H YS-7+ 4B1H Xcaliber 7 4B1H DM Fairway 4B1M Javlnfx 63 4B1M Javlnfx 73 4B1M Javlnfx 83 4B1M Maltby CT250 4B1M N-Gage 65 4B1M NV 55 4B1M NV Protopype 60 4B1M ProForce Classic Series 65 4B1M Pro Jec TW6535 4B1M Pro Jec TW7530 4B1M ProLite 35 4B1M ProLaunch Red w/Axis Tech 4B1M Tour AD YS-Q 65 4B1M VooDoo 60 4B1M Xcaliber 6+ 4B1M Axivcore 69 Tour Black 4B2H Axivcore 79 Tour Black 4B2H DVS 70 4B2H Epic Fairway 4B2H E160 4B2H Maltby Pro Launch 65 4B2H NV 85 4B2H NVS 75 4B2H Pershing 65 4B2H Pershing 75 4B2H ProForce V2 65 4B2H ProForce V2 75 4B2H ProLaunch Blue 65 4B2H ProLaunch Blue 75 4B2H ProLaunch Platinum Tour 75 4B2H ProForce V2 High Launch 4B2H Saishin 4B2H VS Proto 60 4B2H VS Proto 70 4B2H VS Proto 80 4B2H Aura Gold 65 Mid Launch 4B2M Axivcore 69 Blue 4B2M Axivcore 79 Blue 4B2M CER 65 ACD 4B2M CER 75 ACD 4B2M CER FW70 4B2M Command 4B2M Competition Series 4B2M DM UL 4B2M DVS 60 4B2M Gamer 4B2M R R R R300 R300 R300 R R R R R R R R R S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 75S 70S S S S S S S S 65S 75S S S S S S S 163 150 175 181 181 181 152 154 176 179 165 163 166 172 149 169 171 170 157 155 166 169 177 175 152 173 173 173 150 172 171 170 161 155 155 163 165 177 169 175 157 157 169 163 179 165 171 170 177 177 159 159 167 167 165 159 179 169 169 169 176 157 157 151 151 151 182 162 152 169 172 Shaft MPF Flex Graftech Lite 4B2M S Graftech GT 55 4B2M S Graftech GT 65 4B2M S G-Tech 4B2M S Javlnfx V-Series 63 4B2M S Javlnfx V-Series 73 4B2M S KE4 Red 60 4B2M S KE4 V 50 4B2M S Maltby CT250 Fairway 4B2M S MPF MOI 4B2M S Maltby MPF 4B2M S MPF Fairway 4B2M S NV 65 4B2M S NV Pink 65 4B2M S NVS 55 4B2M S NVS 65 4B2M S Pershing 55 4B2M S Powercoil 65 4B2M S ProLaunch Blue 55 4B2M S ProForce ATR 4B2M S ProForce M3 4B2M S ProForce M3HL 4B2M S ProForce V2 55 4B2M S ProForce V2 High Launch 4B2M 50S ProForce V2 High Launch 4B2M 60S ProForce V2 LD 4B2M S ProLaunch Platinum 4B2M S Pro Wound 50 4B2M S Pro Wound 70 4B2M S Saber 4B2M S SteelFiber 65 4B2M S SteelFiber 75 4B2M S Tricept 55 4B2M S Trouble Out Fairway 4B2M S TT Lite XL 4B2M S YS-5+ 4B2M S YS-6+ 4B2M S Xcaliber 5 4B2M S Xcaliber 6 4B2M S Xcaliber Fairway 4B2M S Competition Series Pro 4B2S S N-Gage 55 4B2S S Pro Launch 45 4B2S S Value Series 4B2S S Pro Launch Fairway 4B3H S Advent UL 4B3M S Aura Blue 65 High Launch 4B3M S Axivcore 59 Blue 4B3M S DM Low Torque 4B3M S E150 4B3M S Epic 4B3M S KE4 75 4B3M Firm ProCustom 4B3M S ProLaunch Blue w/Axis Tech 4B3M S Saber High Vector 4B3M S SL Ultralite 4B3M S Dynamic Gold SL 4C1H S300 Aura Pro Red 70 4C1H S ProLaunch Red Fairway 4C1H S Dynamic Gold 4C1M S300 Dynamic Gold Sensicore 4C1M S300 IROD Hybrid .335" 4C1M S ProForce Classic Series 75 4C1M S ProLaunch Red 4C1M S DM Lite 4D2S S MPF Distance 4D2S S Aldila Low Torque 4D3S S ProLite 35 HL 4D3M S YS-6+ 4.5B2M X YS-7+ 4.5B1H X Xcaliber 7 4.5B1H Tour S Call Toll Free: 800.848.8358 Pg. Shaft MPF 153 153 153 177 173 173 150 150 150 149 149 149 171 171 170 170 177 178 167 161 160 160 159 159 159 160 165 154 154 166 178 178 150 151 182 177 177 175 175 175 162 172 167 172 167 154 176 157 152 179 163 150 163 165 166 154 181 176 166 181 181 162 161 166 152 149 172 163 177 177 175 Axivcore 69 Tour Red 5B1H Maltby MPF 5B1H MOI Proto 5B1H NV 75 5B1H NV Protopype 60 5B1H NV Protopype 70 5B1H Pershing 65 5B1H Pershing 75 5B1H VooDoo 60 5B1H VooDoo 75 5B1H Javlnfx 63 5B1M Javlnfx 73 5B1M Javlnfx 83 5B1M NV 55 5B1M ProForce Classic Series 65 5B1M Pro Jec TW6535 5B1M Pro Jec TW7530 5B1M ProLaunch Red w/Axis Tech 5B1M ProLite 35 5B1M Tour AD YS-Q 65 5B1M Axivcore 69 Tour Black 5B2H DVS 70 5B2H Epic Fairway 5B2H NV 85 5B2H ProForce V2 65 5B2H ProForce V2 75 5B2H ProLaunch Blue 65 5B2H ProLaunch Blue 75 5B2H ProLaunch Platinum Tour 75 5B2H VS Proto 60 5B2H VS Proto 70 5B2H VS Proto 80 5B2H Aura Gold 65 Mid Launch 5B2M Axivcore 69 Blue 5B2M Axivcore 79 Blue 5B2M DVS 60 5B2M Javlnfx V-Series 63 5B2M Javlnfx V-Series 73 5B2M Maltby MPF 5B2M NV 65 5B2M Pershing 55 5B2M Pro Launch Blue 55 5B2M ProLaunch Platinum 5B2M Aura Blue 65 High Launch 5B3M Epic 5B3M ProLaunch Blue w/Axis Tech 5B3M Pro Launch Fairway 5B3H Aura Pro Red 70 5C1H Dynamic Gold SL 5C1H ProLaunch Red Fairway 5C1H Dynamic Gold 5C1M Dynamic Gold Sensicore 5C1M ProForce Classic Series 75 5C1M ProLaunch Red 5C1M Flex Pg. X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X S+ X X X X X X X X X X100 X X100 X100 X X 157 149 169 171 170 170 177 177 169 169 173 173 173 171 161 155 155 165 163 177 157 169 163 171 159 159 167 167 165 169 169 169 176 157 157 169 173 173 149 171 177 167 165 176 163 163 167 176 181 166 181 181 161 166 Shaft x 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/23/08 5:47 PM Page 145 MPF SHAFT RATINGS irons Pg. Shaft MPF DM Steel Graftech GT 65 Graftech Lite Rifle TT Lite XL DM Low Torque KE4 V 80 CER 75 ACD G-Tech DM Lite Dynalite Gamer L-Tech L-Tech ProCustom ProForce Ladies Competition Series Competition Series Pro Aldila Low Torque MPF Distance Value Series NV Comp 85 Gamer KB V-Launch CER FW70 Graftech GT 65 Graftech Lite ProLaunch Blue Rifle TT Lite XL DM Low Torque KE4 V 80 Tour Flighted Rifle CER 75 ACD G-Tech DM Lite Dynalite FST 90 FST 115 FST 115 Stepless Advent L-Tech Maltby KE4 80 ProCustom Competition Series Competition Series Pro 1B2H 1B2M 1B2M 1B2M 1B2M 1B3M 1B3M 1D2M 1D2M 1D2S 1D3H 1D3M 1D3M 1D3M 1D3M 1D3M 1D3S 1D3S 1D3S 1D3S 1D3S 2B1H 2B2H 2B3H 2B2M 2B2M 2B2M 2B2M 2B2M 2B2M 2B3M 2B3M 2B3M 2D2M 2D2M 2D2S 2D3H 2D3H 2D3H 2D3H 2D3M 2D3M 2D3M 2D3M 2D3S 2D3S Flex L L L 4 L L L L L L L L LL L L L L L L L L A A 4.0 A A A A 4.5 A A A 4.5 A A A A A A A A A A A A A Pg. Shaft MPF Flex Pg. Shaft MPF 183 153 153 185 182 152 150 151 177 152 182 172 151 151 163 161 162 162 172 149 172 170 172 186 151 153 153 167 185 182 152 150 186 151 177 152 182 187 187 187 154 151 150 163 162 162 MPF Distance 2D3S A Value Series 2D3S A Project X 3.5B1M 5.5 Project X Flighted 3.5B2M 6.0 Rifle 3.5B2M 5.5 Rifle Spinner Wedge 3.5B2M 5 Tour Flighted Rifle 3.5B2M 5.5 Dynamic Gold SL 3B1H R300 NV 3B1H Pro R NV Comp 85 3B1H R ProForce Rv2 115 3B1H R ProLaunch Red 3B1H R SteelFiber 95 3B1H R Project X 3B1M 5.0 DM Steel 3B2H M Gamer 3B2H R KBS Black Nickel Wedge 3B2H R KBS Tour 3B2H 4.5 KB V-Launch 3B2H 5.0 Maltby Dynamic Gold Lite 3B2H R Javlnfx 3B2H R ProForce Rv2 75 3B2H R ProForce Rv2 95 3B2H R ProForce V2 3B2H R SteelFiber 80 3B2H R CER 75 ACD 3B2M R CER FW70 3B2M R Graftech GT 65 3B2M R Graftech Lite 3B2M R G-Tech 3B2M R KE4 V 80 3B2M R Maltby KE4 3B2M R Powercoil 85 3B2M R Project X Flighted 3B2M 5.5 ProLaunch Blue 3B2M R Rifle 3B2M 5.0 Rifle Spinner Wedge 3B2M 4.5 Score Sensicore 3B2M R Tour Flighted Rifle 3B2M 5.0 TT Lite XL 3B2M R Competition Series 3B2S R Competition Series Pro 3B2S R Value Series 3B2S R Dynamic Gold HL 3B3H R300 Dynalite Gold 3B3H R300 Dynalite Gold w/Sensicore 3B3H R300 149 172 185 185 185 185 186 181 170 170 161 166 178 185 183 172 186 186 186 182 173 161 161 160 178 151 151 153 153 177 150 150 178 185 167 185 185 183 186 182 162 162 172 181 183 183 Dynalite Gold SL 3B3H FST 115 Stepless 3B3H FST Hi-Rev Wedge 3B3H GS-75 3B3H DM Low Torque 3B3M Maltby MPF 3B3M Command 3C1M Dynamic Gold 3C1M Dynamic Gold w/Sensi. 3C1M Advent 3D2M DM Lite 3D2S Dynalite 3D3H FST 90 3D3H FST 115 3D3H ProCustom 3D3M Aldila Low Torque 3D3S MPF Distance 3D3S KBS Black Nickel Wedge 4B1H KBS Tour 4B1H NV 4B1H NV Comp 85 4B1H ProForce Rv2 115 4B1H SteelFiber 95 4B1H Project X 4B1M Rifle 4B1M FST 115 4B2H FST 115 Stepless 4B2H FST Hi-Rev Wedge 4B2H Gamer 4B2H Maltby Dynamic Gold Lite 4B2H Javlnfx 4B2H ProForce Rv2 75 4B2H ProForce Rv2 95 4B2H ProForce V2 4B2H Pro Jec TW9520 4B2H SteelFiber 80 4B2H CER 75 ACD 4B2M CER FW70 4B2M Graftech GT 65 4B2M Graftech Lite 4B2M G-Tech 4B2M KE4 V 80 4B2M Maltby KE4 4B2M Maltby MPF 4B2M Powercoil 85 4B2M Project X Flighted 4B2M Rifle Spinner Wedge 3.5B2M 5.0 KBS Black Nickel Wedge 4B1H S 185 186 Rifle Spinner Wedge Rifle Spinner Wedge Flex Pg. Shaft MPF Flex Pg. R300 R R R300 R R R R300 R300 R R R R R R R R S 5.5 Pro S S S S 6.0 6.0 S S S S S S S S S S S S S S S S S Firm S S 6.5 183 187 187 182 152 149 182 181 181 154 152 182 187 187 163 172 149 186 186 170 170 161 178 185 185 187 187 187 172 182 173 161 161 160 155 178 151 151 153 153 177 150 150 149 178 185 ProLaunch Blue 4B2M S Rifle Spinner Wedge 4B2M 5.5 Score Sensicore 4B2M S Tour Flighted Rifle 4B2M 6.0 TT Lite XL 4B2M S Competition Series 4B2S S Competition Series Pro 4B2S S MPF Distance 4D2S S Value Series 4B2S S Dynamic Gold HL 4B3H S300 Dynalite Gold 4B3H S300 Dynalite Gold w/Sensicore 4B3H S300 Dynalite Gold SL 4B3H S300 GS-75 4B3H S200 Advent 4B3M S DM Low Torque 4B3M S Dynamic Gold SL 4C1H S300 FST 125 4C1H S FST Pro 125 Stepless 4C1H S NV 4C1H Tour S ProLaunch Red 4C1H S Command 4C2M S Dynamic Gold 4C1M S300 Dynamic Gold w/Sensicore 4C1M S300 DM Lite 4D2S S MPF Distance 4D2S S KB V-Launch 4C2H 6.0 Dynalite 4D3H S ProCustom 4D3M S Aldila Low Torque 4D3S S Rifle Spinner Wedge 4.5B2M 6 ProForce Rv2 115 5B1H X Project X 5B1M 6.5 Project X Flighted 5B1M 6.5 Rifle 5B1M 6.5 Tour Flighted Rifle 5B1M 6.5 FST 115 5B2H X FST Hi-Rev Wedge 5B2H X Dynalite Gold 5B3H X100 Dynalite Gold w/Sensicore 5B3H X100 Dynalite Gold SL 5B3H X100 Dynamic Gold HL 5B3H X100 FST 115 Stepless 5B3H X 167 185 183 186 182 162 162 149 172 181 183 183 183 182 154 152 181 187 187 170 166 182 181 181 152 149 186 182 163 172 185 161 185 185 185 186 187 187 183 183 183 181 187 185 185 Rifle Spinner Wedge 5B2M 6.5 KBS Black Nickel Wedge 5C1H X 185 186 wedges KBS Black Nickel Wedge 3B2H R Rifle Spinner Wedge 3B2M 4.5 186 185 4B2M 5.5 4.5B2M 6.0 * All iron shafts can be trimmed for wedge use. Those listed in the wedge section of the MPF chart are wedge specific designs by the manufacturer. hybrids NV Pink Hybrid 1D2S Trouble Out .370" 1B2M Proforce V2 .370" 2B2H Proforce V2 .335" 2B2M Trouble Out .370" 2B2M DM Hybrid 2D3M KE4 80 2D3M ProLaunch Blue Hy 2D3H IROD Hybrid .370" 3B1H ProLaunch Red Hybrid .370"3B1H Tour AD YS-Q 85 .370" 3B1H IROD Hybrid .335" 3B1M Javlnfx 70 Hybrid .370" 3B1M VS Proto 3B1M Axivcore Hybrid .370" 3B2H DVS 90 .370" 3B2H Epic Hybrid 3B2H L L A A A A Lite A R R R R R R R R R 171 151 159 159 151 152 150 167 162 166 177 162 173 169 157 169 163 Gamer 3B2H KBS Hybrid 3B2H NV Hybrid 3B2H NVS Hybrid 85 3B2H “Proforce V2 .370" 3B2H Pro Jec TW9520 3B2H ProLaunch Platinum .370"3B2H YS-Hybrid .370" 3B2H Proforce V2 .335" 3B2M Maltby CT250 Fairway 3B2M ProForce V2 .335" 3B2M Pro Wound 80 3B2M Steelfiber 75 Hybrid 3B2M Trouble Out .370" 3B2M ProLaunch Blue Hy 3B3H DM Hybrid 3D3M IROD Hybrid .370" 4B1H R 4.5 R R R R R R R R R R R R R R S 172 186 171 170 159 155 165 177 159 150 159 154 178 151 167 152 162 KBS Hybrid 4B1H Tour AD YS-Q 85 .370" 4B1H Javlnfx 70 Hybrid .370" 4B1M Javlnfx 90 Hybrid .370" 4B1M VS Proto 4B1M Axivcore Hybrid .370" 4B2H DVS 90 .370" 4B2H Epic Hybrid 4B2H Gamer 4B2H NV Hybrid 4B2H NVS Hybrid 85 4B2H Proforce V2 .370" 4B2H Pro Jec TW9520 4B2H ProLaunch Platinum .370" 4B2H YS-Hybrid .370" 4B2H KE4 80 4B2M Proforce V2 .335" 4B2M S S S S S S S S S S S S S S S Firm S 186 177 173 173 169 157 169 163 172 171 170 159 155 165 177 150 159 Maltby CT250 Fairway 4B2M Pro Wound 80 4B2M Steelfiber 75 Hybrid 4B2M Trouble Out .370" 4B2M ProLaunch Blue Hy 4B3H ProLaunch Red Hybrid .370" 4C1H IROD Hybrid .335" 4C1M DM Hybrid 4D3M Javlnfx 90 Hybrid .370" 5B1M VS Proto 5B1M ProLaunch Red Hybrid .370" 5B1H Epic Hybrid 5B2H ProLaunch Platinum .370"5B2H ProLaunch Blue Hy 5B3H KBS Hybrid 5C1H Go To: www.golfworks.com — Open 24 Hours Per Day! S S S S S S S S X X X X X X 6.5 145 150 154 178 151 167 166 162 152 173 169 166 163 165 167 186 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/23/08 5:23 PM Page 146 TRIMMING INSTRUCTIONS 2009 SHAFT TRIMMING INSTRUCTIONS The GolfWorks has simplified shaft trimming instructions for 2009, everything you need to know for proper shaft trimming is right here! Each shaft in the following section has a Shaft Trim Code listed among its specifications. Consult the appropriate line and club number to determine how much to trim off the shaft. Unless noted, all directions are for TIP trimming. The charts at the right are recommended by the manufacturer. Any trimming other than what is listed may void any expressed or implied warranty. See below for additional information for each of the manufacturers. • ALDILA Gamer Hybrid: .370" tip: #2 Hybridbutt trim to length, #3-#5 Hybrid- 1/2" increments Gamer Hybrid/Fairway: .335" tip: Fairway Woods - #3-0", #5-1", #7-1 ½"Hybrid- #2-1", #3-1 ½", #4-2" • CER FW70 Wood shaft trimming is listed for borethru heads. Trim an additional ½" from the amount listed for blind bore heads, (maximum 1 ½") and 1 ¼" from the amount listed for standard bore heads, (maximum 2 ¼"). • DISTANCE MASTER Lite: Wood shaft trimming is listed for bore-thru heads. Trim an additional ½" from the amount listed for blind bore heads, (maximum 2") and 1 ¼" from the amount listed for standard bore heads, (maximum 2 ¾") • GRAFALLOY ProCustom Woods: Trim an additional ¼" from the amount listed for blind bore heads, (maximum 3 ½"), and an additional 1" from the amount listed for standard bore heads, (maximum 4 ¼") ProLaunch 65 & 75, ProLaunch Platinum, Saber, Saber MOI: Trim an additional ½" from the amount listed for blind bore heads, (maximum 1 ½") and an additional 1 ¼" from the amount listed for standard bore heads, (maximum 2 ¼"). • GRAPHITE DESIGN All wood shaft trimming is listed for thru-bore heads, trim an additional ½" for the amount listed in the chart for blind bore heads and an additional 1" from the amount listed in the chart for standard bore heads. For Tour AD Quattrotech install shaft tip 2" into the hosel of a bore through Driver designs. • MALTBY MPF HYBRID .335", use trim code W4. For .370" tip trim as follows: For 15° (225 gm. head) trim 0", - for 18° (231 gm. head) trim ½", for 21° (237 gm. head trim 1", - for 24° (243 gm. head) trim 1 ½" • TRUE TEMPER Wood shaft trimming is listed for thru-bore heads. Trim an additional ½" from the amount listed for blind bore heads and an additional 1 ½" from the amount listed for standard bore heads. Follow chart for all irons except TT Lite XL R/S flex irons to be installed in thru-bore heads, subtract 1" from the amount listed in the chart for these. • ** If the shaft is not listed on this page the manufacture is not making a recommendation for hosel bore type adjustments. Follow the charts as listed with no change whether installing into a bore through, blind bore or standard bore. PLEASE SEE TRIMMING CHART ON NEXT PAGE 146 Call Toll Free: 800.848.8358 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/23/08 5:23 PM Page 147 SHAFT TRIMMING INSTRUCTIONS TRIMMING INSTRUCTIONS TRIM CODE 1 IR1 IR2 IR3 IR4 IR5 IR6 IR7 IR8 IR9 IR10 IR11 IR12 IR13 IR14 IR15 IR16 IR17 IR18 IR19 IR20 IR21 IR22 IR23 IR24 IR25 IR26 IR27 IR28 IR29 IR30 IR31 IR32 IR33 IR34 IR35 2 3 IRON SHAFT TRIMMING INSTRUCTIONS 4 5 6 7 8 9 Butt trim to length only 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 5 1/2" 6" 0" 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 0" 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" 0" 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" 0" 7/16" 1" 1 9/16" 2 1/8" 2 11/16" 3 1/4" 3 3/16" 4 3/8" 1" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/4" 2 1/2" 2 3/4" 3" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 5 1/2" 6" 3" 3 1/2" 4" 4 1/2" 5" 5 1/2" 6" 6 1/2" 7" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 3" 3 1/2" 4" 4 1/2" 5" 5 1/2" 6" 6 1/2" 7" DM Hybrid Clubs: H18-trim 0" from tip, H21-trim 1/2" from tip, H24-trim 1" from tip, H27-trim 1 1/2" from tip Trouble Out/JAVNFX Hybrids: H2 tip trim 1/4" H3 tip trim 1/2" H4 tip trim 3/4" H5 tip trim 1" 0" 0" 0" 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" Trouble Out Hybrids H2 tip trim 1 1/4" H3 tip trim 1 1/2" H4 tip trim 1 3/4" H5 tip trim 2" 0" 0" 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 0" 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3" 0"-15 deg. 1/2"-19 deg." 1"-23 deg." 1 1/2"-27 deg." 2"-31 deg" 0" 0" 0" 3/4" 1 1/2" 2 1/4" 3" 3 3/4" 4 1/2" 3/4" 1 1/4" 1 3/4" 2 1/4" 2 3/4" 3 1/4" 3 3/4" 4 1/4" 4 3/4" 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" 5" 5 1/2" 6" 0"-41" 1/2"-40 1/2" 1"-40" 1 1/2"-39 1/2" 2" - 39" 0" 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 4 1/2" TIP TRIM TO LENGTH 0" 0" 0" 1/2" 1" 1 1/2" 2" 2 1/2" 3" 0"-14 deg." 1/2"-16 deg." 1"-18 deg. 1 1/2"-20 deg." 2"-22 deg." 0" 5/8" 1 1/4" 1 7/8" 2 1/2" 3 1/8" 3 3/4" 4 3/8" 5" 1" 1 5/8" 2 1/4" 2 7/8" 3 1/2" 4 1/8" 4 3/4" 5 3/8" 6" 2" 2 5/8" 3 1/4" 3 7/8" 4 1/2" 5 1/8" 5 3/4" 6 3/8" 7" TRIM CODE 1 W1 W2 0" W3 0" W4 0" W5 0" W6 0" W7 0" W9 W10 0" W11 1" W12 1" W13 1" W15 2" W16 2" W18 3" W19 N/A W20 N/A W21 0" W22 0" - 16 deg W23 0" W26 0" W27 0" W28 2 1/2" W30 0"-40 1/2" W31 0" W32 0" 2 3 WOOD SHAFT TRIMMING INSTRUCTIONS 4 5 6 7 8 Butt trim to length only 1/4" 1/2" 3/4" 1" 1" 1" 1" 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 1/2" 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 1/4" 1/2" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1/2" 1" 1 1/2" 2" 2" 2" 2" 1/2" 1" 1 1/2" 2" 2 1/4" 2 1/2" 2 3/4" For CT 250 Hybrid heads-H2 - trim 2" from tip, H3-trim 2 1/2" from tip, H4-trim 3" from tip 0" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1 1/4" 1 1/2" 1 3/4" 2" 2" 2" 2" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/4" 2 1/2" 2 3/4" 1 1/2" 2" 2 1/2" 3" 3" 3" 3" 2 1/4" 2 1/2" 3" 3 1/2" 3 1/2" 3 1/2" 3 1/2" 2 1/4" 2 1/2" 2 3/4" 3" 3" 3" 3" 3 1/4" 3 1/2" 3 3/4" 4" 4" 4" 4" 0" 0" 1/2" 1" 1 1/2" 2" 2" 0" 0" 1/4" 1/2" 1/2" 1/2" 1/2" 1" 1" 1" 1" 1" 1" 1" 1/2"-19 deg 3/4"-21 deg. 1"-24 deg and higher 0" 1" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/4" 0" 1/4" 1/2" 3/4" 1" 1 1/4" 1 1/2" 0" 1/4" 1/2" 3/4" 3/4" 3/4" 3/4" 2 1/2" 2 3/4" 3" 3 1/4" 3 1/4" 3 1/4" 3 1/4" 1/2"-39 3/4"-40 1/4" 1 1/2"-38 1/4"-38 3/4" 2"-37 3/4"-38" 1/2" 1" 1 1/2" 2" 2 1/4" 2 1/2" 2 1/2" 0" 0" 0" 1/2" 3/4" 1" 1 1/4" Go To: www.golfworks.com — Open 24 Hours Per Day! W 4 1/2" 4" 5 1/2" 6 1/2" 4" 2" 2 1/4" 4 15/16" 3" 5" 6" 7 1/2" 5 1/4" 7 1/4" 1 3/4" 3" 3 1/2" 4 1/2" 5 1/4" 4 1/4" 6 1/4" 3 3/4" 5" 3 1/4" 5" 6" 7" 9+ 1" 1 1/2" 2" 1 1/2" 2" 3" 1/2" 2" 3" 3" 3 1/2" 3" 4" 2" 1/2" 1" 2 1/2" 1 3/4" 3/4" 3 1/4" 2 1/2" 1 1/2" 147 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/22/08 10:31 AM Page 148 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 1/5/09 2:53 PM Page 149 MALTBY MPF DISTANCE WOOD SHAFTS code MA0165 MA0165 MA0165 MA0165 playability trim butt factor code dia. 1D3S W1 .595" 2D3S W1 .600" 3D3S W2 .600" 4D2S W2 .600" flex L A R S tip dia. .335" .335" .335" .335" weight 52 gm. 55 gm. 59 gm. 60 gm. length 45" 46" 46" 46" torque 5.5˚ 5.0˚ 4.8˚ 4.5˚ parallel tip sect. 3" 3.5" 3.5" 3.5" .370" .370" .370" .370" 65 gm. 67 gm. 69 gm. 71 gm. 41" 41" 41" 41" 5.0˚ 5.0˚ 4.7˚ 4.5˚ 5" 5" 5" 5" tip dia. .335" .335" weight 65 gm. 67 gm. length 46" 46" torque 3.5° 3.4° weight 60 gm. 65 gm. 75 gm. 85 gm. weight 75 gm. 85 gm. bend tip point stiffness low soft low soft low med/soft mid medium IRON SHAFTS MA0166 MA0166 MA0166 MA0166 L A R S 1D3S 2D3S 3D3S 4D2S IR20 IR20 IR20 IR20 playability factor 3B2M 4B2M trim code W1 W1 .595" .595" .600" .600" low low low mid MPF DISTANCE each $29.99 $29.99 $29.99 $29.99 each soft soft med/soft medium $17.99 $17.99 $17.99 $17.99 parallel bend tip tip sect. point stiffness 3.5" mid med/firm 3.5" mid/high firm each $34.99 $34.99 length 46" 46" 46" 46" parallel bend tip torque tip sect. point stiffness 4˚ 3.5" low soft 3.5˚ 3.5" low medium 3.2˚ 3.5" mid firm 3.2˚ 4.5" mid/high firm each $29.99 $34.99 $34.99 $34.99 length 41" 41" parallel bend tip torque tip sect. point stiffness 4˚ 5" low/mid medium 3.3˚ 5" mid med/firm each $17.99 $17.99 length 44" 44" 44" torque 4.0° 3.5° 3.5° • Tip structure and flex profile specifically designed to optimize distance • Constructed with ultra lightweight materials using methods to provide stability and consistency • 100% frequency tested in both 0° and 90° planes • Ultra lightweight iron shafts designed to improve distance and provide stability and control through impact MPF MOI WOOD SHAFTS code MA0129 MA0129 flex R S butt dia. .600" .600" MPF MOI • Designed to complement the latest in geometric driver head designs • Incorporates unique materials engineered to eliminate shaft deformation caused by larger driver heads MPF SERIES / WOOD SHAFTS WOOD SHAFTS code MA0025 MA0026 MA0027 MA0027 flex R S S+ X playability factor 3B3M 4B2M 5B2M 5B1H trim code W2 W2 W2 W2 butt dia. .600" .600" .605" .605" tip dia. .335" .335" .335" .335" MPF SERIES WOOD SHAFTS • 100% frequency tested in both 0° and 90° planes • Constructed of latest graphite material only being used in aero space high strength applications • Tip structure and design provide stability and consistency MPF SERIES / IRON SHAFTS IRON SHAFTS code MA0028 MA0028 flex R S playability factor 3B3M 4B2M trim code IR20 IR20 butt dia. .600" .600" tip dia. .370" .370" MPF SERIES / FAIRWAY SHAFTS WOOD SHAFTS code MA0031 MA0031 MA0031 flex A R S playability factor 2B3M 3B2M 4B2M trim code W19 W19 W19 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 75 gm. 77 gm. 77 gm. parallel bend tip sect. point 5" mid 5" mid 5" mid tip stiffness soft/med medium medium MPF SERIES IRON SHAFTS • Tip structure/design provides stability and consistency • An extension of the popular MPF line, this shaft has been designed for the mid- to low handicap player seeking more distance and control MPF SERIES FAIRWAY each $24.99 $24.99 $24.99 • Geometry and bend profile designed specifically for fairway woods • 5" tip parallel section allows for multiple trimming options • 3 bend profiles provide options for a wide range of players with varying clubhead speeds Go To: www.golfworks.com — Open 24 Hours Per Day! 149 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/19/08 3:58 PM Page 150 MALTBY MALTBY TRICEPT WOOD SHAFTS code MA0170 MA0170 flex R S playability trim butt factor code dia. 3B3M W2 .600" 4B2M W2 .600" tip dia. .335" .335" weight 57 gm. 58 gm. length 46" 46" torque 4.2° 4.0° parallel bend tip tip sect. point stiffness 3.5" low med/soft 3.5" low/mid medium tip dia. .350" .350" .350" weight 55 gm. 56 gm. 57 gm. length 46" 46" 46" torque 3.5° 3.5° 3.5° parallel tip sect. 3.5" 3.5" 3.5" .370" ..370" .370" 77 gm. 80 gm. 83 gm. 42" 42" 42" 3.5° 3.5° 3.5° 6" 6" 6" tip dia. .335" .335" .335" weight 60 gm. 61 gm. 63 gm. length 46" 46" 46" torque 4.0° 4.0° 4.0° parallel bend tip tip sect. point stiffness 3" low soft/med 3" low/mid medium 3" mid med/firm tip dia. .335" .335" .335" weight 72 gm. 74 gm. 76 gm. length 46" 46" 46" torque 4.8° 4.5° 4.5° parallel tip sect. 3" 3" 3" .370" ..370" .370" 80 gm. 80 gm. 80 gm. 42" 42" 42" 3.8° 3.8° 3.8° 6" 6" 6" TRICEPT each $39.99 $39.99 KE4 V WOOD SHAFTS playability trim butt code flex factor code dia. MA0131 L/A 1B3M/2B3M W2/W11 .600" MA0131 R 3B2M W2 .600" MA0131 S 4B2M W2 .600" IRON SHAFTS/HYBRID MA0130 L/A 1B3M/2B3M IR7/1R10 .590" MA0130 R 3B2M IR6 .600" MA0130 S 4B2M IR6 .600" bend tip point stiffness low soft/med mid med/firm mid med/firm low mid mid soft/med medium med/firm • Higher launch, lower spin to maximize distance • Ultra lightweight yields higher clubhead speeds • Designed for high performance when matched with Tricept Series Drivers KE4 V each $29.99 $29.99 $29.99 each $13.99 $13.99 $13.99 • Bend profile serves as a perfect complement to new KE4 V driver head • Premium materials provide consistent performance and smooth feel KE4 RED 60 WOODS WOOD SHAFTS code MA0050 MA0050 MA0050 flex Lite R Firm playability trim butt factor code dia. 2D3M W2 .585" 3B2M W2 .590" 4B2M W2 .595" KE4 WOOD 60 each $34.99 $34.99 $34.99 KE4 75/80 WOOD SHAFTS code MA0051 MA0051 MA0051 flex Lite R Firm playability trim butt factor code dia. 2D3M W4 .600" 3B3M W4 .600" 4B3M W4 .605" bend point low low low tip stiffness soft soft/med soft/med IRON SHAFTS/HYBRID MA0052 MA0052 MA0052 Lite R Firm 2D3M 3B2M 4B2M IR3 IR3 IR3 .595" .595" .595" low soft/med low/mid medium mid med/firm • Ultra Lightweight lowers overall club weight which results in higher clubhead speeds • Laser wrap construction produces the most consistent wrapped graphite available • Designed for use with KE4 drivers for high performance KE4 75 each $24.99 $24.99 $24.99 each $14.99 $14.99 $14.99 NOTE: KE4 80 iron shafts are also designed for use with the KE4 Hybrids. Shaft trimming for Hybrids is as follows: H15: trim 0" from tip, H18: trim 1/2" from tip, H21: trim 1" from tip, H24: trim 1 1/2" from tip. After tip trimming, trim to final length from butt. • 75 gram weight designed for those players wanting a slightly heavier overall club weight in a driver • Designed specifically for use with KE4 Fairway Woods KE4 80 • 80 gram shaft weight optimum for graphite iron and hybrid shafts, providing lighter overall club weight without being too light • Filament Wound construction CT-250 WOOD SHAFTS playability trim butt code flex factor code dia. CT35W R 3B2M W6 .600" CT35W S 4B1M W6 .600" FAIRWAY/HYBRID SHAFTS AT1001 R 3B2M W3/W9* .600" AT1001 S 4B2M W3/W9* .605" 150 tip dia. .350" .350" weight 54 gm. 54 gm. length 46" 46" torque 4.5˚ 4.3˚ .350" .350" 70 gm. 72 gm. 46" 46" 3.85˚ 3.85˚ parallel bend tip tip sect. point stiffness 4" mid medium 4" mid/high med/firm 5.5" 5.5" low low soft soft CT-250 each $39.99 $39.99 $24.99 $24.99 Call Toll Free: 800.848.8358 • Ultra, ultra lightweight yields higher swing speeds • Compression Coil Technology allows light weight to be used by even the strongest players and yields an incredibly stable shaft 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/19/08 3:59 PM Page 151 MALTBY/CER L-TECH WOMEN'S WOOD SHAFTS code MA0096 MA0096 MA0096 flex LL L A playability trim factor code 1D3S W7 1D3S W7 2D3S W7 butt dia. .580" .580" .580" tip dia. .335" .335" .335" weight 60 gm. 60 gm. 62 gm. length 45" 45" 45" torque 5.5˚ 5.5˚ 5.5˚ parallel tip sect. 6" 6" 6" bend point low low low tip stiffness soft soft soft .580" .580" .580" .370" .370" .370" 55 gm. 57 gm. 59 gm. 39" 39" 39" 4.5˚ 4.5˚ 4.5˚ 7.5" 7.5" 7.5" low low low soft soft soft IRON SHAFTS MA0097 MA0097 MA0097 LL L A 1D3M 1D3M 2D3M IR3 IR3 IR3 L-TECH WOMEN’S each $18.99 $18.99 $18.99 each $15.99 $15.99 $15.99 TROUBLE OUT WOOD SHAFTS code MA0132 MA0132 MA0132 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 75 gm. 76 gm. 77 gm. length 44" 44" 44" torque 4.0˚ 4.0˚ 4.0˚ L/A 1B2M/2B2M IR17/IR19 .600" R/S 3B2M/4B2M IR17/IR19 .600" .370" .370" 80 gm. 80 gm. 42" 42" 4.0˚ 3.8˚ weight 63 gm. 65 gm. 66 gm. length 46" 46" 46" torque 3.8° 3.6° 3.5° parallel bend tip tip sect. point stiffness 4.5" low/mid medium 4.5" mid medium 4.5" mid medium parallel bend tip tip sect. point stiffness 5" low/mid medium 5" mid medium flex A R S playability factor 2B2M 3B2M 4B2M trim code W19 W19 W19 parallel bend tip tip sect. point stiffness 4.5" low/mid medium 4.5" mid medium 4.5" mid medium HYBRID SHAFTS MA0133 MA0133 6" 6" low/mid medium mid medium • Designed specifically for women with three distinct flexes for ultimate custom fitting: — Soft Flex (LL): For 25+ handicap players who need help getting the ball in the air — Medium Flex (L): 15-30 handicaps who need less kick — Firm Flex (A): Handicaps of 20 and below who make consistent contact TROUBLE OUT each $9.99 $9.99 $9.99 each $9.99 $9.99 • Designed specifically for Trouble Out fairway and hybrid model heads • Lightweight design provides added distance without sacrificing accuracy CER 65 ACD WOOD SHAFTS code CE0026 CE0026 CE0026 flex A R S playability trim butt factor code dia. 2B2M W6 .600" 3B2M W6 .600" 4B2M W6 .600" tip dia. .335" .335" .335" CER 65 ACD each $19.99 $19.99 $19.99 • Ultra lightweight model is a good fit for players seeking more club head speed • Tight manufacturing tolerance provides reliable, repeatable performance CER 75 ACD WOOD SHAFTS code CE0027 CE0027 flex L/A R/S playability trim butt factor code dia. 1B2M/2B2M W4/W12 .595" 3B2M/4B2M W4/W12 .600" tip dia. .335" .335" weight 73 gm. 78 gm. length 46" 46" torque 4.5° 4.2° L/A R/S 1D2M/2D2M IR7/IR10 .595" 3B2M/4B2M IR7/IR10 .600" .370" .370" 75 gm. 78 gm. 42" 42" 3.9˚ 3.7˚ 5.5" 5.5" low mid medium medium IRON SHAFTS CE0028 CE0028 CER 75 ACD each $12.99 $12.99 each $12.99 $12.99 • Slightly heavier version of CER 65 ACD • Wood shaft is a versatile design for use in drivers or fairway metal woods • Iron shaft (CE0028) is an excellent lightweight design that encourages higher ball flight CER FW70 WOOD SHAFTS code flex CERFW70W05 A CERFW70W05 R CERFW70W05 S playability factor 2B2M 3B2M 4B2M trim code W7 W7 W7 butt dia. .590" .590" .595" tip dia. ..335" .335" .335" weight 73 gm. 73 gm. 73 gm. length 45" 45" 45" torque 4.5˚ 4.5° 4.5° parallel tip sect. 5" 5" 5" bend point mid mid mid tip stiffness medium medium medium 2B2M 3B2M 4B2M IR6 IR6 IR6 .595" .595" .595" .370" .370" .370" 77 gm. 77 gm. 78 gm. 40" 40" 40" 3.75˚ 3.75˚ 3.75˚ 5.5" 5.5" 5.5" mid mid mid medium medium medium IRON SHAFTS CERFW70I05 CERFW70I05 CERFW70I05 A R S CER FW70 each $12.99 $12.99 $12.99 each $11.99 $11.99 $11.99 • Filament Wound construction produces high levels of consistency from shaft to shaft • Engineered to perform well with the CER line of clubs • Extremely tight frequency tolerances • 3.75° torque provides stability in irons without sacrificing feel Go To: www.golfworks.com — Open 24 Hours Per Day! 151 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 12/19/08 3:39 PM Page 152 DISTANCE MASTER DISTANCE MASTER LITE WOOD SHAFTS code DM0070 DM0070 DM0070 DM0070 flex L A R S playability trim butt factor code dia. 1D2S W4 .580" 2D2S W4 .600" 3D2S W4 .600" 4D2S W4 .600" tip dia. .335" .335" .335" .335" weight 63 gm. 67 gm. 69 gm. 71 gm. length 46" 46" 46" 46" torque 5.5˚ 5.5˚ 5.5˚ 5.5˚ parallel bend tip tip sect. point stiffness 7.5" low soft 7.5" mid/low med/soft 7.5" mid/low med/soft 7.5" mid/low med/soft .370" .370" .370" .370" 60 gm. 68 gm. 68 gm. 68 gm. 40" 40" 40" 40" 4.5˚ 4.5˚ 4.5˚ 4.5˚ 6" 6" 6" 6" tip dia. .335" .335" .335" weight 65 gm. 65 gm. 65 gm. length 45" 45" 45" torque 3.5˚ 3.5˚ 3.5˚ parallel tip sect. 4" 4" 4" bend point mid mid mid tip stiffness medium medium medium IRON SHAFTS DM0071 DM0071 DM0071 DM0071 L A R S 1D2S 2D2S 3D2S 4D2S IR7 IR7 IR7 IR7 .580" .600" .600" .600" low soft mid/low med/soft mid/low med/soft mid/low med/soft DISTANCE MASTER LITE each $13.99 $13.99 $13.99 $13.99 each $12.99 $12.99 $12.99 $12.99 • Light and responsive with a mid/low bend point • Available for woods and irons • Laser wrap construction provides consistency from shaft to shaft DISTANCE MASTER UL WOOD SHAFTS code DM0042 DM0042 DM0042 flex A R S playability trim butt factor code dia. 2B2M W1 .600" 3B2M W1 .600" 4B2M W1 .600" DISTANCE MASTER UL each $17.99 $17.99 $17.99 • Ultra lightweight, laser wrap shaft designed for 450cc (and larger) titanium drivers • 3.5° of torque helps ensure clubface is square at impact • Medium tip stiffness DISTANCE MASTER LOW TORQUE WOOD SHAFTS code DM0044 DM0044 flex L/A R/S playability trim butt factor code dia. 1/2B3M W4/W12 .585" 3/4B3M W4/W12 .600" tip dia. .335" .335" weight 77 gm. 87 gm. length 46" 46" torque 5.0˚ 4.5˚ parallel tip sect. 5" 5" bend point low low tip stiffness soft soft .370" .370" 79 gm. 88 gm. 41" 41" 3.0˚ 3.0˚ 5.5" 5.5" low low soft soft length 42" 42" 42" torque 3.85˚ 3.85˚ 3.85˚ parallel tip sect. 5.5" 5.5" 5.5" bend point low low low tip stiffness soft soft soft each $11.99 $11.99 $11.99 length 43.5" 43.5" torque 3.5˚ 3.5˚ parallel tip sect. 7.5" 7.5" bend point mid mid tip stiffness firm firm each $13.99 $13.99 IRON SHAFTS DM0043 DM0043 L/A R/S 1/2B3M 3/4B3M IR7/IR10 .585" IR7/IR10 .585" each $11.99 $11.99 each $10.99 $10.99 DISTANCE MASTER LOW TORQUE • Low torque reduces shaft twisting and helps square clubhead at impact • Low bend point and soft tip • Combination flex for multiple trimming options • Filament wound construction DISTANCE MASTER HYBRID HYBRID SHAFTS code DM0046 DM0046 DM0046 playability trim butt flex factor code dia. A 2D3M IR16 .595" R 3D3M IR16 .595" S 4D3M IR16 .595" tip dia. .370" .370" .370" weight 80 gm. 80 gm. 80 gm. DISTANCE MASTER HYBRID • Filament wound for consistency • Designed for higher, softer ball flights • Works great with DM Hybrids DISTANCE MASTER FAIRWAY WOOD SHAFTS code DM0045 DM0045 152 flex R S playability trim butt factor code dia. 3B1M W26 .600" 4B1M W26 .600" tip dia. .335" .335" weight 83 gm. 83 gm. Call Toll Free: 800.848.8358 DISTANCE MASTER FAIRWAY • Specially designed for fairway woods • Filament-wound with a mid bend point and firm tip for penetrating ball flight • Parallel tip section is ideal for custom trimming 0109 P. 142-153 -GW Shafts:0507 P. 173-183 -GW Shafts 1/6/09 11:32 AM Page 153 GRAFTECH GT 55 WOODS WOOD SHAFTS code GW0049 GW0049 GW0049 flex A R S playability factor 2D2M 3B2M 4B2M trim code W2 W2 W2 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 56 gm. 57 gm. 58 gm. GRAFTECH GT 55 WOODS parallel bend length torque tip sect. point 46" 4.7˚ 3" mid 46" 4.6˚ 3" mid 46" 4.5˚ 3" mid tip stiffness soft soft/med soft/med each $14.99 $14.99 $14.99 parallel bend length torque tip sect. point 41" 4.1˚ 5.5" mid 41" 4.0˚ 5.5" mid tip stiffness medium medium each $12.99 $12.99 parallel bend tip tip sect. point stiffness 6" low/mid soft/med 6" mid medium each $9.99 $9.99 • Sub 60 gram, discrete flex shaft provides great performance at the lowest price available in this weight category • Soft to medium/soft tip stiffness promotes higher trajectories and provides great feel GRAFTECH GT 65 IRONS IRON SHAFTS code GW0050 GW0050 flex L/A R/S playability trim factor code 1B2M/2B2M IR7/IR10 3B2M/4B2M IR7/IR10 butt dia. .600" .600" tip dia. .370" .370" weight 66 gm. 67 gm. GRAFTECH GT 65 IRONS • Lightest combination flex graphite iron shaft available • Ultra light graphite iron shaft designed for distance and consistency GRAFTECH GT 65 WOODS WOOD SHAFTS code GW0048 GW0048 playability trim flex factor code L/A 1B2M/2B2M W4/W12 R/S 3B2M/4B2M W4/W12 butt dia. .600" .600" tip dia. .335" .335" weight 65 gm. 65 gm. length 47" 47" torque 4.5˚ 4.5˚ GRAFTECH GT 65 WOODS • Ultra lightweight model provides performance and value at a costeffective price point • Combination flex designs enable clubmakers to have multiple flex options GRAFTECH LITE WOOD SHAFTS code GW1005 GW1005 flex L/A R/S playability trim factor code 1B2M/2B2M W4/W12 3B2M/4B2M W4/W12 butt dia. .600" .600" tip dia. .335" .335" weight 73 gm. 73 gm. L/A R/S 1B2M/2B2M IR7/IR10 3B2M/4B2M IR7/IR10 .595" .595" .370" .370" 73 gm. 73 gm. parallel bend length torque tip sect. point 47" 4.8˚ 6" mid 47" 4.8˚ 6" mid tip stiffness medium medium IRON SHAFTS GW1006 GW1006 42" 42" 3.5˚ 3.5˚ 6" 6" mid mid medium medium GRAFTECH LITE each $7.99 $7.99 each $7.99 $7.99 • 100% graphite • Filament wound • Excellent alternative in both quality and cost to steel shafts • Combination flex provides multiple tip trim options Go To: www.golfworks.com — Open 24 Hours Per Day! 153 0109 P. 154-155-Rapport:0507 P. 204-205-Fujikura 12/19/08 4:01 PM Page 154 RAPPORT RAPPORT PRO WOUND 50 WOOD SHAFTS code RA0011 RA0011 flex R S playability factor 3B2M 4B2M trim code W23 W23 butt dia. .585" .590" tip dia. .335" .335" RAPPORT PRO WOUND 50 weight 55 gm. 55 gm. length 46" 46" torque 4° 4° parallel bend tip sect. point 5" mid 5" mid tip stiffness med/firm med/firm each $49.99 $49.99 weight 70 gm. 70 gm. length 46" 46" torque 3.8° 3.8° parallel bend tip sect. point 5" mid 5" mid tip stiffness med/firm med/firm each $44.99 $44.99 • Designed for distance and accuracy • Suitable for fast or slow club head speeds which is uncommon in shafts of this weight • Most concentric 55 gram shaft on the market RAPPORT PRO WOUND 70 WOOD SHAFTS code RA0012 RA0012 flex R S playability factor 3B2M 4B2M trim code W7 W7 butt dia. .600" .605" tip dia. .335" .335" RAPPORT PRO WOUND 70 RAPPORT PRO WOUND 80 HYBRID HYBRID SHAFTS code RA0013 RA0013 flex R S playability factor 3B2M 4B2M trim code IR21 IR21 butt dia. .605" .605" tip dia. .370" .370" • Mid weight works great for drivers and fairways • Laser wrapped inner core with filament wound butt section specifically designed to stabilize oversized drivers through impact without sacrificing feel RAPPORT PRO WOUND 80 weight 88 gm. 88 gm. length 43" 43" torque 3.3° 3.3° parallel bend tip sect. point 5.5" mid 5.5" mid tip stiffness med/firm med/firm each $39.99 $39.99 tip dia. .335" .335" .335" weight 57 gm. 59 gm. 61 gm. length 46" 46" 46" torque 3.7° 3.7° 3.7° parallel bend tip sect. point 3" low 3" low 3" low tip stiffness med/soft med/soft med/soft each $24.99 $24.99 $24.99 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 67 gm. 67 gm. 67 gm. length 46" 46" 46" torque 4.3° 4.3° 4.3° parallel bend tip sect. point 5" low 5" low 5" low tip stiffness soft soft soft each $16.99 $16.99 $16.99 butt dia. .595" .595" .595" tip dia. .370" .370" .370" weight 77 gm. 77 gm. 77 gm. length 42" 42" 42" torque 3.9° 3.9° 3.9° parallel bend tip sect. point 6" low 6" low 6" low tip stiffness soft soft soft each $15.99 $15.99 $15.99 • 100% filament wound for ultimate concentricity • Designed specifically to transition hybrid clubs from fairways to irons, creating a more consistent set from woods to irons RAPPORT SL ULTRALITE WOOD SHAFTS code RA0014 RA0014 RA0014 flex A R S playability factor 2D3M 3B2M 4B3M trim code W3 W3 W3 butt dia. .590" .590" .595" RAPPORT SL ULTRALITE • Rapport's #1 selling ultralite wood shaft • Uses state of the art filament winding technology • Manufactured to tight tolerances for consistency from shaft to shaft RAPPORT ADVENT UL WOOD SHAFTS code RA0010 RA0010 RA0010 flex A R S playability factor 2D3M 3D3M 4B3M trim code W23 W23 W23 RAPPORT ADVENT UL • Ultralite wood shaft version of Rapports best selling iron shaft • 100% filament wound for consistency and concentricity • Best possible Ultralight shaft on the market for the money RAPPORT ADVENT IRON SHAFTS code RA0009 RA0009 RA0009 154 flex A R S playability factor 2D3M 3D2M 4B3M trim code IR6 IR6 IR6 RAPPORT ADVENT Call Toll Free: 800.848.8358 • A must for the discerning club maker looking for a combination of performance and price • Manufactured by 100% filament winding make the Advent graphite iron shafts equal to if not more consistent than light weight steel shafts 0109 P. 154-155-Rapport:0507 P. 204-205-Fujikura 12/19/08 4:02 PM Page 155 RAPPORT RAPPORT PRO JEC R 6535 WOOD SHAFTS code flex RA0004W R RA0004W S RA0004W X 6830 WOOD SHAFTS eRA0008W R RA0008W S 7530 WOOD SHAFTS RA0005W S RA0005W X 9520 IRON SHAFTS RA0007H R RA0007H S playability factor 3B1M 4B1M 5B1M trim code W31 W31 W31 butt dia. .620" .620" .620" tip dia. .335" .335" .335" weight 65 gm. 65 gm. 65 gm. length 46" 46" 46" torque 4.0˚ 4.0˚ 4.0˚ parallel bend tip tip sect. point stiffness 4.5" mid/high med/firm 4.5" mid/high med/firm 4.5" mid/high med/firm 3B1H 4B1H W31 W31 .600" .600" .335" .335" 59 gm. 61 gm. 46" 46" 3.0˚ 3.0˚ 4" 4" mid/high med/firm mid/high med/firm 4B1M 5B1M W31 W31 .635" .635" .335" .335" 78 gm. 78 gm. 46" 46" 3.7˚ 3.7˚ 4.5" 4.5" mid/high med/firm mid/high med/firm 3B2H 4B2H IR1 IR1 .630" .630" .370" .370" 92 gm. 92 gm. 42" 42" 2.6˚ 2.6˚ 4.0" 4.0" mid mid medium medium each $109.99 $109.99 $109.99 $109.99 $109.99 each $109.99 $109.99 each $99.99 $99.99 RAPPORT PRO JEC R • Manufactured using Patent Pending Dual Process Construction by utilizing a laser wrapped single layer core ultra-modulus carbon fiber for quick shaft recovery and a lively feel • Hybrid construction adds a constant taper filament wound body for very low dynamic torque providing excellent head stability through impact Go To: www.golfworks.com — Open 24 Hours Per Day! 155 0109 P. 156-162 UST Shafts:0507 P. 184-189-UST Shafts 12/30/08 3:08 PM Page 156 4-Axis Woven Carbon Fiber for Power, Stability and Feel Strands along the zero or longitudinal axis give the shaft added stiffness (power). Strands along the bias or lateral axis control the shafts torque or resistance to twisting (control). Strands along the circumference give the shaft added hoop strength for better shaft recovery (feel). Strands along the bias or lateral axis control the shafts torque or resistance to twisting (control). ©2008 United Sports Technologies. All rights reserved. 0109 P. 156-162 UST Shafts:0507 P. 184-189-UST Shafts 12/30/08 3:09 PM Page 157 UST AXIVCORE BLUE WOOD SHAFTS-59 code US0037 US0037 US0037 US0037 flex L A R S WOOD SHAFTS-69 eaUS0038 US0038 US0038 R S X WOOD SHAFTS-79 US0039 US0039 S X AXIVCORE BLUE playability factor 1D3M 2D3M 3B3M 4B3M trim code W6 W6 W6 W6 butt dia. .590" .595" .595" .600" tip dia. .335" .335" .335" .335" weight 57 gm. 58 gm. 58 gm. 58 gm. length 46" 46" 46" 46" torque 4.9° 4.4° 4.1° 3.9° parallel tip sect. 4" 4" 4" 4" bend point low low low low tip stiffness med/soft med/soft med/soft med/soft each $89.99 $89.99 $89.99 $89.99 3B3M 4B2M 5B2M W6 W6 W6 .605" .605" .605" .335" .335" .335" 69 gm. 69 gm. 69 gm. 46" 46" 46" 3.8° 3.8° 3.8° 4" 4" 4" mid mid mid med/soft med/soft med/soft $89.99 $89.99 $89.99 4B2M 5B2M W6 W6 .615" .615" .335" .335" 78 gm. 78 gm. 46" 46" 3.3° 3.3° 4" 4" mid mid med/soft med/soft $89.99 $89.99 • Features AXIV Technology, a proprietary “interlinked weave”, 4 axis, single ply, carbon composite prepreg • Woven prepreg is more consistent than “layered alternatives” • Shape retaining properties provide stability and consistent loading and unloading of the shaft AXIVCORE TOUR BLACK WOOD SHAFTS-69 code US0040 US0040 flex S X WOOD SHAFTS-79 US0041 S playability factor 4B2H 5B2H 4B2H trim butt code dia. W6 .610" W6 .610" W6 .615" tip dia. .335" .335" weight 68 gm. 68 gm. length 46" 46" torque 3.1° 3.1° .335" 77 gm. 46" 2.5° length 46" 46" torque 3.2° 3.2° parallel bend tip tip sect. point stiffness 4" mid/high medium 4" mid/high medium 4" AXIVCORE TOUR BLACK each $139.99 $139.99 mid/high medium $139.99 parallel bend tip tip sect. point stiffness 4" mid/high med/firm 4" mid/high med/firm each $139.99 $139.99 parallel tip sect. 4" 4" each $54.99 $54.99 • Ultra low torque design • Manufactured to Tour tolerances • Multiple weight and flex options AXIVCORE TOUR RED WOOD SHAFTS code US0042 US0042 flex S X playability factor 4B1H 5B1H trim butt code dia. W6 .610" W6 .610" tip dia. .335" .335" weight 68 gm. 69 gm. AXIVCORE TOUR RED • Stronger Mid and Tip sections result in higher ball speeds and Tour launch • Multiple weights and flexes for professionals and better amateurs AXIVCORE HYBRID BLUE WOOD SHAFTS code US0043 US0043 flex R S playability factor 3B2H 4B2H trim code W6 W30 butt dia. .595" .600" tip dia. .370" .370" weight 85 gm. 87 gm. length 42" 42" torque 2.9° 2.9° bend point mid mid tip stiffness medium medium AXIVCORE HYBRID • Hybrid specific design provides optimum launch and distance control • AXIV Technology produces a stable design with rapid shaft recovery ed. Go To: www.golfworks.com — Open 24 Hours Per Day! 157 0109 P. 156-162 UST Shafts:0507 P. 184-189-UST Shafts 12/30/08 3:09 PM Page 158 0109 P. 156-162 UST Shafts:0507 P. 184-189-UST Shafts 12/30/08 3:10 PM Page 159 UST PROFORCE V2 HIGH LAUNCH WOOD SHAFTS code US0025 US0025 US0025 US0025 US0025 US0025 US0025 US0025 flex 55 L 55 A 55 R 55 S 65 R 65 S 75 R 75 S playability trim butt factor code dia. 1D3S W6 .610" 2B2M W6 .610" 3B2M W6 .615" 4B2M W6 .615" 3B2M W6 .600" 4B2M W6 .600" 3B2M W6 .605" 4B2H W6 .605" tip dia. .335" .335" .335" .335" .335" .335" .335" .335" weight 52 gm. 52 gm. 53 gm. 53 gm. 64 gm. 65 gm. 74 gm. 75 gm. length 46" 46" 46" 46" 46" 46" 46" 46" torque 5.1° 4.5° 4.2° 4.2° 3.8° 3.7° 2.8° 2.8° parallel bend tip tip sect. point stiffness 4" low soft 4" mid/low med/soft 4" mid/low med/soft 4" mid/low med/soft 4" mid med/soft 4" mid med/soft 4" mid med/soft 4" mid med/soft each $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 PROFORCE V2 HIGH LAUNCH • Higher launch version of the top selling ProForce V2 • Flexible tip and higher torque for golfers wanting to maximize launch and distance • ProForce Tip Technology produces a very stable, consistent, high performance shaft PROFORCE V2 HIGH LAUNCH LADIES • V2 High Launch technology incorporated in a ladies profile PROFORCE V2 WOOD SHAFTS code US0004W US0001W US0001W US0001W US0001W US0001W US0001W US0001W US0001W US0001W - .335" TIP playability flex factor 55 L 1D3S 55 A 2B2M 55 R 3B2M 55 S 4B2M 65 R 3B2H 65 S 4B2H 65 X 5B2H 75 R 3B2H 75 S 4B2H 75 X 5B2H .350" TIP AVAILABLE - CODE: US0003W trim code W2 W6 W6 W6 W6 W6 W6 W6 W6 W6 butt dia. .600" .600" .600" .600" .600" .600" .600" .605" .605" .605" tip dia. .335" .335" .335" .335" .335" .335" .335" .335" .335" .335" weight 55 gm. 56 gm. 57 gm. 57 gm. 65 gm. 66 gm. 66 gm. 75 gm. 76 gm. 76 gm. length 46" 46" 46" 46" 46" 46" 46" 46" 46" 46" torque 5.2° 3.7° 3.7° 3.7° 3.0° 3.0° 2.9° 2.2° 2.2° 2.2° parallel tip sect. 4" 4" 4" 4" 4" 4" 4" 4" 4" 4" bend point low mid mid mid mid/high mid/high mid/high mid/high mid/high mid/high tip stiffness soft medium medium medium medium medium medium medium medium medium PROFORCE V2 each $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 $69.99 • Already a winner on the PGA Tour • Features a balanced tip section for higher launch, increased ball speed and longer carry • High modulus material positioned to optimize the amazing feel in the hands PROFORCE V2 LADIES • Tour winning technology now available for ladies • Low bend point and soft tip provides optimal trajectory for slow swing speeds PROFORCE V2 HYBRID WOOD SHAFTS code US0013H US0013H US0013H US0013H US0013H US0013H flex A R S A R S playability factor 2B2M 3B2M 4B2M 2B2H 3B2H 4B2H trim code W19 W19 W19 W30 W30 W30 butt dia. .600" .600" .600" .605" .605" .605" tip dia. .335" .335" .335" .370" .370" .370" weight 66 gm 70 gm 72 gm 79 gm 84 gm 86 gm length 44" 44" 44" 41" 41" 41" torque 3.4° 3.4° 3.4° 3.2° 3.2° 3.2° parallel tip sect. 3.5" 3.5" 3.5" 3.5" 3.5" 3.5" bend tip point stiffness mid/low medium mid/low medium mid/low medium mid/low medium mid/low medium mid/low medium PROFORCE V2 HYBRID each $44.99 $44.99 $44.99 $44.99 $44.99 $44.99 • Fiber orientation in the butt and mid section creates a hoop strength that gives this shaft a unique stable feel • Features a balanced tip section for higher launch, increased ball speed • Optimized torque reduces spin for superior control Go To: www.golfworks.com — Open 24 Hours Per Day! 159 0109 P. 156-162 UST Shafts:0507 P. 184-189-UST Shafts 12/30/08 3:14 PM Page 160 UST PROFORCE V2 LD WOOD SHAFTS code US0026 US0026 flex S X playability factor 3B2M 4B2M trim code W6 W6 butt dia. .605" .605" tip dia. .335" .335" weight 71 gm. 71 gm. length 48" 48" torque 3.3° 3.3° parallel tip sect. 4" 4" weight 94 gm 96 gm length 36-40” 36-40” torque 2.2° 2.2° parallel tip sect. 2" 2" bend point mid mid tip stiffness med/soft med/soft PROFORCE V2 LD each $154.99 $154.99 • The ultimate long drive shaft • Easy to load and has an explosive release of energy at impact PROFORCE V2 IRONS IRON SHAFTS code US0031 US0031 flex R S playability trim butt tip factor code dia. dia. 3B2H IR1 .600-.610" .370" 4B2H IR1 .605-.615" .370" bend point mid mid tip stiffness medium medium PROFORCE V2 IRON each $34.99 $34.99 • UST engineers weight each shaft incrementally at 95 grams to match each iron in the bag • Innovative design technique produces consistent launch conditions and distance control from the tee and fairway PROFORCE M3 SERIES A GOLFWORKS EXCLUSIVE! WOOD SHAFTS code US0029 US0029 US0030 US0030 - .335" TIP playability trim butt flex factor code dia. R 3B2M W6 .600" S 4B2M W6 .600" R 3B2M W6 .600" S 4B2M W6 .600" tip dia. .335" .335" .335" .335" weight 66 gm 70 gm 66 gm 70 gm length 46" 46" 46" 46" torque 4.1° 4.1° 4.6° 4.6° parallel bend tip tip sect. point stiffness 4" mid/high medium 4" mid/high medium 3.5" low soft 3.5" low soft PROFORCE M3 SERIES each $49.99 $49.99 $49.99 $49.99 QUICK-SHIP CLUB PAKS Tricept Magnesium D R I V E R 9.5°, 10.5° ProForce M3 Shaft Crossline Tour Grip KE4 SSF1 D R I V E R 9.5°, 10.5°, 12.5° ProForce M3HL Shaft Crossline Tour Grip SAVE $ 3597 SAVE $ 3597 PMA0150M3 PMA0152M3 $ $ Separately: $205.96 Separately: $155.96 16999 160 11999 Call Toll Free: 800.848.8358 • ProForce M3 tip flex produces mid to high launch condition for carry and roll • ProForce M3 High Launch tip flex produces higher launch condition for greater carry distance • Lightweight design increases swing speed for maximum distance 0109 P. 156-162 UST Shafts:0507 P. 184-189-UST Shafts 12/30/08 3:14 PM Page 161 UST PROFORCE® CLASSIC SERIES 65/75 WOOD SHAFTS code PF65W PF65W PF65W - PROFORCE 65 playability trim butt flex factor code dia. R 3B1M W6 .610" S 4B1M W6 .610" X 5B1M W6 .615" tip dia. .335" .335" .335" weight 71 gm. 71 gm. 74 gm. length 46" 46" 46" torque 3.4˚ 3.4˚ 3.4˚ parallel bend tip tip sect. point stiffness 4" mid/high firm 4" mid/high firm 4" mid/high firm PRO FORCE® 65™ each $49.99 $49.99 $49.99 .350" TIP AVAILABLE - CODE: PF65W35 WOOD SHAFTS - PROFORCE 75 PF75W PF75W PF75W R S X 3B1M 4C1M 5C1M W6 W6 W6 PROFORCE® ATR WOOD SHAFTS code PF6ATW PF6ATW PF6ATW flex A R S .615" .618" .618" .335" .335" .335" • Equipped with Proforce Tip Technology, with optimized weight, torque and flex • Built for distance and accuracy • Mid-High flex point for penetrating launch angle PRO FORCE® 75 77 gm. 81 gm. 81 gm. 46" 46" 46" 3.3˚ 3.3˚ 3.3˚ 4" 4" 4" high high high firm firm firm torque 3.5˚ 3.5˚ 3.4˚ parallel tip sect. 4" 4" 4" bend point mid mid mid tip stiffness medium medium medium torque 3.2˚ 3.2˚ parallel bend tip tip sect. point stiffness 5.5" mid/low med/soft 5.5" mid/low med/soft torque 2.9˚ 2.9˚ parallel tip sect. 5.5" 5.5" torque 2.5˚ 2.5˚ 2.5˚ parallel bend tip tip sect. point stiffness 5.5" mid/high med/firm 5.5" mid/high med/firm 5.5" mid/high med/firm bend point low tip stiffness soft low soft $49.99 $49.99 $49.99 • The original ProForce design a “beefed up” ultralight with Proforce Tip Technology • Tighter shot dispersion on offcenter hits • High flex point A GOLFWORKS EXCLUSIVE! playability trim butt factor code dia. 2B2M W6 .590" 3B2M W6 .610" 4B2M W6 .615" tip dia. .335" .335" .335" weight 72 gm. 73 gm. 76 gm. length 46" 46" 46" PRO FORCE® ATR™ each $49.99 $49.99 $49.99 • Active Tip Response (ATR)responsive tip section produces higher launch angles/greater carry distances • Designed for driver and fairway wood installation. • Optimum weight, torque, flex and Proforce Tip Technology PROFORCE® RV2™ 75/95/115 IRON SHAFTS-75 code US201205 US201205 playability flex factor R 3B2H S 4B2H trim code IR3 IR3 butt dia. .595" .600" tip dia. .370" .370" playability trim butt flex factor code dia. R 3B2H IR3 .600" S 4B2H IR3 .600" tip dia. .370" .370" IRON SHAFTS-95 code US201206 US201206 IRON SHAFTS-115 code US0002I US0002I US0002I playability trim butt flex factor code dia. R 3B1H IR3 .600" S 4B1H IR3 .600" X 5B1H IR3 .600" tip dia. .370" .370" .370" weight 81 gm. 83 gm. weight 94 gm. 95 gm. weight 111 gm. 114 gm. 115 gm. length 40" 40" length 40" 40" length 40" 40" 40" bend point mid mid tip stiffness medium medium PROFORCE® RV2 75 each $24.99 $24.99 • Redesigned for improved balance and control • For players seeking the performance and playability of light weight graphite shafts PROFORCE® RV2 95 each $24.99 $24.99 • Easier to swing than “so-called” lightweight steel shafts • Provides improved accuracy and distance control PROFORCE® RV2 115 each $24.99 $24.99 $24.99 • Designed for players looking for the feel, balance and control of a tour weighted model • Excellent option for players seeking steel-like performance PROFORCE® LADIES WOOD SHAFTS code PFLW playability trim butt flex factor code dia. L 1D3M W6 .580" tip dia. .335" weight 66 gm. length 44" torque 3.6˚ parallel tip sect. 4" .370" 66 gm. 39" 4.8˚ 4.8" IRON SHAFTS PFLI L 1D3M IR20 .570" PROFORCE® LADIES each $29.99 each $19.99 • Lightweight graphite with low flex point • Designed to fit women golfers • Helps increase clubhead speed • Woods available in Electric Blue, Champagne Bronze, and Bright Pink • Irons available in Champagne or Light Pink (PFLIP) Go To: www.golfworks.com — Open 24 Hours Per Day! 161 0109 P. 156-162 UST Shafts:0507 P. 184-189-UST Shafts 1/5/09 12:13 PM Page 162 UST COMPETITION SERIES PRO™ WOOD SHAFTS code 2203W 2203W 2203W 2203W flex L A R S playability factor 1D3S 2D3S 3B2S 4B2S trim code W6 W6 W6 W6 butt dia. .565" .590" .595" .600" tip dia. .335" .335" .335" .335" weight 74 gm. 76 gm. 78 gm. 81 gm. length 45" 45" 45" 45" torque 5.4° 5.2° 4.9° 4.9° parallel tip sect. 3.5" 3.5" 3.5" 3.5" bend point low low mid mid tip stiffness soft soft medium medium L A R S 1D3S 2D3S 3B2S 4B2S IR3 IR3 IR3 IR3 .565" .590" .595" .600" .370" .370" .370" .370" 70 gm. 75 gm. 75 gm. 78 gm. 40" 40" 40" 40" 5.0° 4.6° 4.3° 4.3° 5.5" 5.5" 5.5" 5.5" low low mid mid soft soft medium medium each $19.99 $19.99 $19.99 $19.99 each $17.99 $17.99 $17.99 $17.99 IRON SHAFTS 2203I 2203I 2203I 2203I COMPETITION SERIES PRO™ • Light weight, yet highly durable • Designed for the mid to high handicap player needing both control and distance • Available in woods & irons COMPETITION SERIES WOOD SHAFTS code US0044 US0044 playability trim factor code 1/2D3M W6/W13 3/4B2M W6/W13 butt dia. .590" .600" tip dia. .335" .335" weight 63 gm. 66 gm. length 47" 47" torque 4.9˚ 4.9˚ parallel tip sect. 4" 4" bend point low mid tip stiffness medium medium each $17.99 $17.99 flex L/A R/S playability trim butt factor code dia. 1/2D3S IR3/IR11.590" 3/4B2S IR3/IR11.600" tip dia. .370" .370" weight 80 gm. 83 gm. length 42" 42" torque 4.8˚ 4.6˚ parallel tip sect. 6.5" 6.5" bend point low mid tip stiffness soft medium each $14.99 $14.99 bend point tip stiffness each IRON SHAFTS code US0045 US0045 COMPETITION SERIES flex L/A R/S • Lightweight, durable designs provide the ultimate club building flexibility • Longer parallel sections and combination flexes can be trimmed to fit a wide variety of golfers • Two color options available: Green (L/A flex) or Orange (R/S flex) • L/A flex designated “low kick point” and R/S flex designated “mid kick point” on both wood and iron shafts IROD™ HYBRID HYBRID SHAFTS code flex - .335" TIP US205201 R US205201 S HYBRID - .370" TIP US205202 R US205202 S playability trim butt factor code dia. tip dia. weight length torque parallel tip sect. IROD™ HYBRID HYBRID 3B1M 4C1M W19 .610" W19 .610" .335" .335" 73 gm. 73 gm. 44" 44" 3.4˚ 3.4˚ 4" 4" mid/high med/firm mid/high med/firm $29.99 $29.99 3B1H 4B1H W30 .595" W30 .600" .370" .370" 81 gm. 83 gm. 41" 41" 3.7˚ 3.7˚ 5.5" 5.5" mid/high med/firm mid/high med/firm $29.99 $29.99 • Created to work with “trouble” utility clubs as well as all modern hybrid clubs • Accurately controls distance and ball dispersion on the long fairway approach shots EASYFLEX - SWING TEMPO TRAINING SHAFT IRON/WOOD SHAFTS code US0032 US0033 162 flex n/a n/a playability trim butt factor code dia. n/a IR1 .585" n/a W1 .585" tip dia. .370" .335" weight n/a n/a length 39" 45" torque n/a n/a parallel tip sect. n/a n/a bend point n/a n/a tip stiffness n/a n/a EASYFLEX each $19.99 $19.99 Call Toll Free: 800.848.8358 • Extremely flexible design promotes better swing tempo • Provides instant feedback on perfect timing to square face • For golfers of all abilities 0109 P. 163-167 Grafalloy:0507 P. 190-194 -Grafalloy 12/19/08 4:04 PM Page 163 GRAFALLOY PROLITE 35 HL WOOD SHAFTS code TT0057 TT0057 TT0057 flex A R S playability factor 2D3M 3D3M 4D3M trim code W2 W2 W2 butt dia. .595" .600" .600" tip dia. .335" .335" .335" weight 61 gm. 66 gm. 66 gm. length 46" 46" 46" torque 4.8° 4.2° 4.2° parallel tip sect. 4" 4" 4" bend point low low low tip stiffness soft soft soft PROLITE 35 HL each $38.99 $38.99 $38.99 • A soft tip version of Grafalloy’s ProLite 35, the winningest ultra light graphite shaft in the history of the PGA Tour • Low kick point gives golfers the benefit of higher launch angles to maximize distance without sacrificing control and accuracy ORDER YOUR SHAFTS TIP PREPPED FOR ONLY $2.95! code:RSPREP PROLITE 35 WOOD SHAFTS-BURGUNDY code TT202211 TT202211 TT202211 playability flex factor R 3B1M S 4B1M X 5B1M trim code W1 W1 W1 butt dia. .605" .605" .605" tip dia. .335" .335" .335" weight 62 gm. 64 gm. 66 gm. length 46" 46" 46" .350" playability trim factor code 3B3M W2 4B3M W2 5B3M W2 3B3M W2 4B3M W2 5B3M W2 butt dia. .600" .600" .600" .600" .600" .600" tip dia. .335" .335" .335" .350" .350" .350" weight 69 gm 70 gm 71 gm 71 gm 72 gm 73 gm PROLITE™ 35 torque 3.5˚ 3.5˚ 3.5˚ parallel tip sect. 2" 2" 2" bend point high high high tip stiffness firm firm firm each $39.99 $39.99 $39.99 length 46" 46" 46" 46" 46" 46" torque 3.5° 3.5° 3.5° 3.5° 3.5° 3.5° parallel tip sect. 4" 4" 4" 4" 4" 4" bend point low low low low low low tip stiffness soft soft soft soft soft soft each $99.99 $99.99 $99.99 $99.99 $99.99 $99.99 • The original "ultralite" highperformance shaft • Low torque design ideal for stronger players • Great choice for today’s highperformance driver heads • .350" (TT0058) EPIC DRIVER SHAFTS-.335" AND code TT0023 TT0023 TT0023 TT0023 TT0023 TT0023 flex R S X R S X FAIRWAY SHAFTS-.335" TT0024 TT0024 TT0024 EPIC R S X HYBRID SHAFTS-.370" 3B2H 4B2H 5B2H W32 W32 W32 .600" .600" .600" .335" .335" .335" 84 gm 87 gm 87 gm 44" 44" 44" 2.5° 2.5° 2.5° 4" 4" 4" mid mid mid medium medium medium $79.99 $79.99 $79.99 TT0025 TT0025 TT0025 3B2H 4B2H 5B2H W22 W22 W22 .595" .595" .600" .370" .370" .370" 85 gm 85 gm 91 gm 43" 43" 43" 2.5° 2.5° 2.2° 3" 3" 3" mid mid mid medium medium medium $79.99 $79.99 $79.99 R S X • Utilizes proprietary Nanofuse® Technology • Not only produces increased distance off the tee, but also delivers a 35% improvement in shot dispersion when compared to other graphite shafts on the market today • Nanofuse® material harnesses the superior strength properties of nano-crystalline metals and fuses them at the molecular level with a composite polymer substrate • Additional tip sizes available .350" Fairway (TT0027) .335", .350", .355" Hybrid (TT0026) PRO CUSTOM™ WOOD & IRON WOOD SHAFTS code TT202214 TT202214 flex L/A R/S playability trim butt factor code dia. 1/2D3S W27/28 .595" 3/4B3M W27/28 .600" tip dia. .335" .335" weight 68 gm. 70 gm. length 48" 48" torque 5.0˚ 5.0˚ parallel tip sect. 6" 6" bend point low low tip stiffness soft soft each $19.99 $19.99 flex L/A R/S playability trim butt factor code dia. 1/2D3M IR25/26 .590" 3/4D3M IR25/26 .590" tip dia. .370" .370" weight 74 gm. 77 gm. length 43" 43" torque 4.1˚ 3.9˚ parallel tip sect. 8" 8" bend point low low tip stiffness soft soft each $17.99 $17.99 IRON SHAFTS code TT201201 TT201201 PRO CUSTOM WOOD and IRON • Allows performance to be matched to each player's needs • Ultimate shaft for all clubmaking options • Suitable for a wide range of players and clubhead styles Go To: www.golfworks.com — Open 24 Hours Per Day! 163 0109 P. 163-167 Grafalloy:0507 P. 190-194 -Grafalloy 1/7/09 9:09 AM Page 164 0109 P. 163-167 Grafalloy:0507 P. 190-194 -Grafalloy 12/19/08 4:05 PM Page 165 GRAFALLOY PROLAUNCH RED WITH AXIS TECH WOOD SHAFTS code TT0056 TT0056 TT0056 flex R S X playability factor 3B1M 4B1M 5B1M trim code W2 W2 W2 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 62 gm. 63 gm. 63 gm. length 46" 46" 46" torque 3.8° 3.8° 3.8° parallel tip sect. 2" 2" 2" bend point high high high tip stiffness stiff stiff stiff each $91.99 $91.99 $91.99 PROLAUNCH RED WITH AXIS TECH • SmartPly™ Technology features six unique cross-linked fiber axes producing extreme power, distance and accuracy • Integrated Micro-Mesh Technology maximizes clubhead stability, responsiveness and spin control • ProLaunch Axis Red is launchmonitor-tuned to promote low to medium launch conditions with lower spin PROLAUNCH BLUE WITH AXIS TECH WOOD SHAFTS code TT0055 TT0055 TT0055 TT0055 flex A R S X playability factor 2D3M 3D3M 4B3M 5B3M trim code W2 W2 W2 W2 butt dia. .600" .600" .600" .600" tip dia. .335" .335" .335" .335" weight 58 gm. 58 gm. 58 gm. 60 gm. length 46" 46" 46" 46" torque 4.5° 4.0° 4.0° 4.0° parallel tip sect. 2" 2" 2" 2" bend point low low low low tip stiffness soft soft soft soft each $91.99 $91.99 $91.99 $91.99 PROLAUNCH BLUE WITH AXIS TECH • SmartPly™ Technology features six unique cross-linked fiber axis producing extreme power, distance and accuracy • Integrated Micro-Mesh Technology maximizes clubhead stability, responsiveness and spin control • ProLaunch Axis Blue is launchmonitor-tuned to promote medium to high launch conditions with medium spin PROLAUNCH PLATINUM SERIES WOOD SHAFTS playability code flex factor TT0034 A 2B2M TT0034 R 3B2M TT0034 S 4B2M TT0034 X 5B2M TOUR 75 WOOD SHAFTS TT0036 TT0036 TT0036 trim code W2 W2 W2 W2 butt dia. .600" .600" .600" .600" tip dia. .335" .335" .335" .335" weight 49 gm. 58 gm. 63 gm. 66 gm. length 46" 46" 46" 46" torque 4.0° 3.5° 3.3° 3.3° parallel tip sect. 4" 4" 4" 4" bend point mid mid mid mid tip stiffness medium medium medium medium each $94.99 $94.99 $94.99 $94.99 R S X 3B2H 4B2H 5B2H W2 W2 W2 .605" .605" .605" .335" .335" .335" 75 gm. 77 gm. 78 gm. 46" 46" 46" 3.0° 3.0° 3.0° 4" 4" 4" mid mid mid medium medium medium $94.99 $94.99 $94.99 R S X 3B2H 4B2H 5B2H W22 .600" W22 .600" W22 .600" .370" .370" .370" 78 gm. 80 gm. 83 gm. 41" 41" 41" 2.0° 2.0° 2.0° 4" 4" 4" mid mid mid medium medium medium $54.99 $54.99 $54.99 length 46" 46" torque 3.2° 2.8° parallel bend tip tip sect. point stiffness 4.5" mid/low med/soft 4.5" mid/low med/soft each $69.99 $69.99 HYBRID SHAFTS TT0038 TT0038 TT0038 PROLAUNCH PLATINUM SERIES • Smart-Ply™ Technology provides dramatically improved shaft integrity for increased energy transfer resulting in greater distance and improved shot dispersion • High initial launch angle that flattens quickly, producing a ball flight between ProLaunch Blue and ProLaunch Red • Grafalloy's proprietary System 9 design model computes over 40,000 calculations per shaft ensuring unparalleled accuracy in material placement and lay-up • .350" wood shaft available (TT0035) • .350" Tour 75 wood shaft available (TT0037) • .355" hybrid shaft available (TT0052) MALTBY PROLAUNCH BLUE 65 WOOD SHAFTS code TT0014W TT0014W flex R S playability factor 3B2H 4B2H trim code W2 W2 butt dia. .600" .605" tip dia. .335" .335" weight 64 gm. 64 gm. MALTBY PROLAUNCH 65 • Designed in partnership with Grafalloy • Decreases likelihood of hooks or slices Go To: www.golfworks.com — Open 24 Hours Per Day! 165 0109 P. 163-167 Grafalloy:0507 P. 190-194 -Grafalloy 12/19/08 4:06 PM Page 166 GRAFALLOY SABER MOI A GOLFWORKS EXCLUSIVE! WOOD SHAFTS code TT0039 TT0039 flex R S playability factor 3B1H 4B1H trim code W2 W2 butt dia. .610" .610" tip dia. .335" .335" weight 65 gm. 67 gm. length 46" 46" torque 2.8° 2.8° parallel bend tip tip sect. point stiffness 4" mid/high med/stiff 4" mid/high med/stiff SABER MOI each $39.99 $39.99 • Engineered to work with today's generation of High MOI metal wood heads • Design eliminates ovaling caused by larger, high MOI wood heads • Smooth feel SABER HIGH VECTOR A GOLFWORKS EXCLUSIVE! WOOD SHAFTS code TT0040 TT0040 TT0040 flex A R S playability factor 2D3M 3D3M 4B3M trim code W2 W2 W2 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 55 gm. 56 gm. 57 gm. SABER HIGH VECTOR length 46" 46" 46" torque 4.5° 4.5° 4.5° parallel tip sect. 3.5" 3.5" 3.5" bend point low low low tip stiffness soft soft soft each $34.99 $34.99 $34.99 • Higher-launch version of Saber shaft • Special reinforced amorphorous material makes the lower 16 to 18 inches of the shaft softer, thus generating a higher launch SABER A GOLFWORKS EXCLUSIVE! WOOD SHAFTS code TT0041 TT0041 flex R S playability factor 3B2M 4B2M trim code W2 W2 SABER butt dia. .605" .605" tip dia. .335" .335" weight 65 gm. 67 gm. length 46" 46" torque 3.8° 3.7° parallel tip sect. 4.5" 4.5" bend point mid mid tip stiffness medium medium each $29.99 $29.99 each $69.99 $69.99 $69.99 • Special materials placed in the tip and other key zones enhance the shaft's stability and control • Design increases energy transfer at impact for a higher ball velocity and greater shot distance PROLAUNCH RED WOOD SHAFTS-.335" PROLAUNCH RED playability factor 3B1M 4C1M 5C1M trim code W1 W1 W1 butt dia. .600" .605" .610" tip dia. .335" .335" .335" weight 62 gm. 64 gm. 66 gm. length 46" 46" 46" torque 3° 3° 3° parallel tip sect. 3" 3" 3" bend point high high high tip stiffness firm firm firm 3B1M 4C1M 5C1M W1 W1 W1 .600" .605" .610" .350" .350" .350" 62 gm. 64 gm. 66 gm. 46" 46" 46" 3° 3° 3° 3" 3" 3" high high high firm firm firm $69.99 $69.99 $69.99N SHAFTS R S R S 3B1H 4C1H 3B1H 4C1H IR2 IR2 IR1 IR1 .600" .600" .600" .600" .370" .370" .355" .355" 83 gm. 88 gm. 87 gm. 88 gm. 40" 40" varied varied 2.8° 2.8° 2.8° 2.8° 6" 6" n/a n/a high high high high firm firm firm firm $39.99 $39.99 $39.99 $39.99 R S X 3B1H 4C1H 5C1H W20 .600" W20 .600" W20 .600" .335" .335" .335" 71 gm. 74 gm. 74 gm. 44" 44" 44" 3.2° 3.2° 3.2° 5" 5" 5" high high high stiff stiff stiff $59.99 $59.99 $59.99 R S X 3B1H 4C1H 5B1H W22 .600" W22 .600" W22 .600" .370" .370" .370" 87 gm. 89 gm. 90 gm. 42" 42" 42" 2.0° 2.0° 2.0° 4" 4" 4" high high high stiff stiff stiff $44.99 $44.99 $44.99 code TT0018W TT0018W TT0018W flex R S X WOOD SHAFTS-.350" TT0018W R TT0018W S TT0018W X IRON SHAFTS TT0022 TT0022 TT0022 TT0022 FAIRWAY SHAFTS TT0032 TT0032 TT0032 HYBRID SHAFTS TT0033 TT0033 TT0033 166 Call Toll Free: 800.848.8358 • Lower ball flight version of original Pro Launch • Features Micro Mesh™ tip technology • Ultimate combination of power and tour-caliber trajectory built upon the unequaled performance benefits of the ProLite 35 • .350" fairway shaft available (TT0050) • .355" hybrid shaft available (TT0051) ORDER YOUR SHAFTS TIP PREPPED FOR ONLY $2.95! code:RSPREP 0109 P. 163-167 Grafalloy:0507 P. 190-194 -Grafalloy 12/19/08 4:06 PM Page 167 GRAFALLOY PRO LAUNCH BLUE SERIES 45 WOOD SHAFTS playability flex factor L 1D2S A 2D2S R 3B2S S 4B2S PRO LAUNCH BLUE 55 WOOD SHAFTS playability code flex factor TT202205 A 2B2M TT202205 R 3B2M TT202205 S 4B2M TT202205 X 5B2M PRO LAUNCH BLUE 65 WOOD SHAFTS playability code flex factor TT202207 R 3B2H TT202207 S 4B2H TT202207 X 5B2H PRO LAUNCH BLUE 75 WOOD SHAFTS playability code flex factor TT202209 R 3B2H TT202209 S 4B2H TT202209 X 5B2H PRO LAUNCH 45 PRO LAUNCH BLUE code TT202203 TT202203 TT202203 TT202203 trim code W1 W1 W1 W1 butt dia. .595" .595" .595" .595" tip dia. .335" .335" .335" .335" weight 44 gm. 44 gm. 44 gm. 48 gm. length 46" 46" 46" 46" torque 5.0° 5.0° 5.0° 5.0° parallel tip sect. 2" 2" 2" 2" bend point mid/low mid/low mid/low mid/low tip stiffness med/soft med/soft med/soft med/soft trim code W1 W1 W1 W1 butt dia. .600" .600" .605" .605" tip dia. .335" .335" .335" .335" weight 56 gm. 56 gm. 57 gm. 58 gm. length 46" 46" 46" 46" torque 4.0° 4.0° 4.0° 4.0° parallel tip sect. 3" 3" 3" 3" bend point mid/low mid/low mid/low mid/low tip stiffness med/soft med/soft med/soft med/soft each $69.99 $69.99 $69.99 $69.99 trim code W2 W2 W2 butt dia. .600" .605" .605" tip dia. .335" .335" .335" weight 64 gm. 64 gm. 64 gm. length 46" 46" 46" torque 3.2° 2.8° 2.8° parallel bend tip tip sect. point stiffness 4.5" mid/low med/soft 4.5" mid/low med/soft 4.5" mid/low med/soft each $69.99 $69.99 $69.99 trim code W2 W2 W2 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 75 gm. 76 gm. 78 gm. length 46" 46" 46" torque 2.9° 2.9° 2.9° parallel bend tip tip sect. point stiffness 4.5" mid/low med/soft 4.5" mid/low med/soft 4.5" mid/low med/soft each $69.99 $69.99 $69.99 trim code IR2 IR2 IR2 butt dia. .600" .600" .600" tip dia. .370" .370" .370" weight 80 81 82 length 41" 41" 41" torque 3.2° 3.0° 3.0° parallel tip sect. 6" 6" 6" bend point low low low tip stiffness soft soft soft each $39.99 $39.99 $39.99 length 41" 41" 41" 41" 41" 41" 41" 41" torque 2.6° 2.4° 2.4° 2.4° 2.6° 2.4° 2.4° 2.4° parallel tip sect. 4" 4" 4" 4" 4" 4" 4" 4" bend point low low low low low low low low tip stiffness soft soft soft soft soft soft soft soft each $44.99 $44.99 $44.99 $44.99 $44.99 $44.99 $44.99 $44.99 length 44" 44" 44" 44" torque 2.8° 2.8° 2.8° 2.8° parallel tip sect. 5" 5" 5" 5" bend point low low low low tip stiffness soft soft soft soft each $59.99 $59.99 $59.99 $59.99 each $69.99 $69.99 $69.99 $69.99 PRO LAUNCH 55 PRO LAUNCH BLUE IRON SHAFTS code TT201203 TT201203 TT201203 flex A R S playability factor 2B2M 3B2M 4B2M • Ideal for slow controlled swings • Super ultralite weight for increased clubhead speed • Increases kick velocity and energy transfer • .350" tip available (TT202204) • Ultralite weight for the next generation in golf shaft technology • Micro-Mesh Technology for increased control and distance • Produces optimum launch angles • .350" tip available (TT202206) PRO LAUNCH 65 • Incorporating patent-pending "Dynamic Torsional Stability" • Decreases likelihood of hooks or slices • Increases launch angles • .350" tip available (TT202208) PRO LAUNCH 75 • Heavier design for great feel and clubhead control • Excellent torsional properties to eliminate hooks and slices • .350" tip available (TT202210) PROLAUNCH IRONS • Grafalloy's Micro-Mesh™ tip technology makes the new ProLaunch iron shaft the most torsionally stable composite iron shaft ever • Launch monitor tuned performance promotes higher launch angles and soft-landing approach shots PRO LAUNCH BLUE HY HYBRID PROLAUNCH HY HYBRID PRO LAUNCH BLUE HYBRID SHAFTS code TT205201 TT205201 TT205201 TT205201 TT205202 TT205202 TT205202 TT205202 flex A R S X A R S X playability factor 2D3H 3B3H 4B3H 5B3H 2D3H 3B3H 4B3H 5B3H trim code W22 W22 W22 W22 W22 W22 W22 W22 butt dia. .600" .600" .600" .600" .600" .600" .600" .600" tip dia. .335" .335" .335" .335" .370" .370" .370" .370" weight 79 gm. 80 gm. 81 gm. 82 gm. 79 gm. 80 gm. 81 gm. 82 gm. • Grafalloy's first shaft designed exclusively for today's popular hybrid clubs • Incorporation of Grafalloy's patented Micro Mesh™ technology produces great feel and tip stability at impact • .350" tip available (TT0053) • .355" tip available (TT0054) PROLAUNCH BLUE FAIRWAY WOOD SHAFTS code TT0021 TT0021 TT0021 TT0021 flex A R S X playability factor 2D3H 3B3H 4B3H 5B3H trim code W32 W32 W32 W32 butt dia. .600" .600" .600" .600" tip dia. .335" .335" .335" .335" weight 80 gm. 81 gm. 82 gm. 84 gm. PROLAUNCH FAIRWAY • ProLaunch technology specifically designed to optimize ball flight in performance fairway heads • 44" design features optimal weight properties to compliment Prolaunch driver shaft Go To: www.golfworks.com — Open 24 Hours Per Day! 167 0109 P. 168-172 Aldila:0507 P. 195-199-Aldila 12/22/08 11:54 AM Page 168 0109 P. 168-172 Aldila:0507 P. 195-199-Aldila 12/19/08 4:57 PM Page 169 ALDILA VOODOO WOOD SHAFTS code AL0023 AL0023 AL0023 AL0023 AL0023 AL0023 flex 60R 60S 60X 75R 75S 75X playability trim butt factor code dia. 3B1M W21 .630" 4B1M W21 .630" 5B1H W21 .630" 3B1M W21 .630" 4B1H W21 .630" 5B1H W21 .630" VOODOO tip dia. .335" .335" .335" .335" .335" .335" weight 65 gm. 66 gm. 68 gm. 74 gm. 75 gm. 76 gm. length 46" 46" 46" 46" 46" 46" torque 4.2° 3.5° 3.2° 3.9° 3.2° 2.8° parallel bend tip sect. point 3" mid/high 3" mid/high 3" mid/high 3" mid/high 3" mid/high 3" mid/high tip stiffness med/stiff med/stiff med/stiff med/stiff med/stiff med/stiff playability trim butt factor code dia. 3B2M W21 .625" 4B2M W21 .630" 5B2M W21 .630" tip dia. .335" .335" .335" weight 63 gm. 63 gm. 63 gm. length 46" 46" 46" torque 3.3° 3.3° 3.3° parallel bend tip sect. point 3.5" mid 3.5" mid 3.5" mid tip stiffness each med/soft $199.99 med/soft $199.99 med/soft $199.99 playability trim butt factor code dia. 4B2H W21 .625" 5B2H W21 .625" tip dia. .335" .335" weight 71 gm. 71 gm. length 46" 46" torque 2.8° 2.8° parallel bend tip sect. point 3.5" mid 3.5" mid tip stiffness each med/soft $199.99 med/soft $199.99 .625" .625" .370" .370" 91 gm. 91 gm. 42" 42" 1.8˚ 1.8˚ 3" 3" mid mid butt dia. .625" .625" .625" .620" .625" .625" .625" .625" tip dia. .335" .335" .335" .335" .335" .335" .335" .335" weight 62 gm. 63 gm. 64 gm. 70 gm. 70 gm. 71 gm. 83 gm. 84 gm. length 46" 46" 46" 46" 46" 46" 46" 46" torque 3.2˚ 3.2˚ 3.2˚ 2.8˚ 2.8˚ 2.8˚ 2.2˚ 2.2˚ parallel tip sect. 3" 3" 3" 3" 3" 3" 3" 3" bend point mid mid mid mid mid mid mid mid playability trim butt factor code dia. 3B1M IR1 .625" 4B1M IR1 .625" 5B1M IR1 .630" tip dia. .370" .370" .370" weight 93 gm. 94 gm. 96 gm. length 42" 42" 42" torque 1.4˚ 1.4˚ 1.4˚ parallel bend tip tip sect. point stiffness 3" mid/high med./firm 3" mid/high med./firm 3" mid/high med./firm length 46" 46" 46" torque 2.8° 2.8° 2.8° parallel bend tip sect. point 3.5" mid 3.5" mid 3.5" mid each $299.99 $299.99 $299.99 $299.99 $299.99 $299.99 • Patented S-core Technology dramatically stabilizes the shaft’s cross-section through the use of an internal carbon-fiber rib system • Increases hoop stiffness by 80% over conventional graphite and as much as 60% over competitors’ attempts at cross-section stabilization • Shaft better resists shaft ovaling and deformation during the swing DVS 60 and 70 DVS 60 WOOD SHAFTS code AL0020 AL0020 AL0020 DVS flex 60R 60S 60X 70 WOOD SHAFTS code AL0020 AL0020 flex 70S 70X HYBRID SHAFTS AL0021 AL0021 90R 90S 3B2H 4B2H IR1 IR1 med/soft med/soft $99.99 $99.99 DVS SERIES • Features an innovative, new responsive tip design for extra kick at impact with an optimum launch. • Stabilized with a unique flex profile and very low torque - distance is maximized. • Aldila’s revolutionary Micro Laminate Technology, enhanced with carbon nano-tubes, provides for perfect feel. ORDER YOUR SHAFTS TIP PREPPED FOR ONLY $2.95! code:RSPREP VS PROTO SERIES WOOD SHAFTS code AL0014W AL0014W AL0014W AL0014W AL0014W AL0014W AL0014W AL0014W - .335" TIP playability flex factor 60 R 3B2H 60 S 4B2H 60 X 5B2H 70 R 3B2H 70 S 4B2H 70 X 5B2H 80 S 4B2H 80 X 5B2H tip stiffness med/firm med/firm med/firm med/firm med/firm med/firm med/firm med/firm VS PROTO each $179.99 $179.99 $179.99 $179.99 $179.99 $179.99 $179.99 $179.99 • Next generation Micro Laminate Technology™ combines Carbon Nano-Tubes with Aldila's proprietary A65 Performance Resin System • Unparalleled performance and feel • The straightest, longest shaft Aldila has ever offered VS PROTO HYBRID HYBRID SHAFTS code AL0015 AL0015 AL0015 trim code W21 W21 W21 W21 W21 W21 W21 W21 flex R S X each $89.99 $89.99 $89.99 • Next generation Micro Laminate Technology™ combines Carbon Nano-Tubes with Aldila's proprietary A65 Performance Resin System MOI PROTO WOOD SHAFTS code AL0019 AL0019 AL0019 flex R S X playability trim butt factor code dia. 3B1H W1 .625" 4B1H W1 .625" 5B1H W1 .625" tip dia. .335" .335" .335" weight 68 gm. 68 gm. 68 gm. tip stiffness medium medium medium MOI PROTO each $129.99 $129.99 $129.99 • Combining Nano Technology and a novel design approach called Nano Enhanced Technology™ (NET2), Aldila is able to achieve the increased MOI required to offset the unique bending and twisting effect large modern head designs have on a shaft Go To: www.golfworks.com — Open 24 Hours Per Day! 169 0109 P. 168-172 Aldila:0507 P. 195-199-Aldila 12/22/08 4:31 PM Page 170 ALDILA NVS 55/65/75 WOOD SERIES WOOD SHAFTS-55 code AL202202 AL202202 AL202202 flex A R S WOOD SHAFTS-65 code AL202202 AL202202 AL0001W AL0001W flex R S R S WOOD SHAFTS-75 code AL202202 AL202202 AL0001W AL0001W flex R S R S NVS 55 playability trim butt factor code dia. 2B2M W21 .625" 3B2M W21 .625" 4B2M W21 .625" tip dia. .335" .335" .335" weight 57 gm. 58 gm. 58 gm. length 46" 46" 46" torque 4.2˚ 4.2˚ 4.2˚ parallel tip sect. 3" 3" 3" bend point mid mid mid tip stiffness each medium $67.99 medium $67.99 medium $67.99 playability trim butt factor code dia. 3B2M W21 .625" 4B2M W21 .625" 3B2M W21 .625" 4B2M W21 .625" tip dia. .335" .335" .350" .350" weight 68 gm. 68 gm. 68 gm. 68 gm. length 46" 46" 46" 46" torque 3.5˚ 3.5˚ 3.5˚ 3.5˚ parallel tip sect. 3" 3" 3" 3" bend point mid mid mid mid tip stiffness medium medium medium medium each $67.99 $67.99 $67.99 $67.99 • Features same microlaminate technology that is used in the NV Series • The most popular weight for high performance drivers • Features a more responsive tip for higher ball flight playability trim butt factor code dia. 3B2H W21 .625" 4B2H W21 .625" 3B2H W21 .625" 4B2H W21 .625" tip dia. .335" .335" .350" .350" weight 78 gm. 79 gm. 78 gm. 79 gm. length 46" 46" 46" 46" torque 3.0˚ 3.0˚ 3.0˚ 3.0˚ parallel tip sect. 3" 3" 3" 3" bend point mid mid mid mid tip stiffness medium medium medium medium each $67.99 $67.99 $67.99 $67.99 NVS 75 tip dia. .370" .370" weight 80 gm. 81 gm. length 42" 42" torque 2.7˚ 2.7˚ parallel tip sect. 3" 3" bend point mid mid tip stiffness medium medium each $47.99 $47.99 parallel bend tip sect. point 5" mid 5" mid 5" mid tip stiffness medium medium medium each $37.99 $37.99 $37.99 parallel bend tip sect. point tip stiffness sets • Features the same unmatched performance & feel of the original NV with higher launch • Features a more responsive tip for those seeking higher ball flight NVS 65 • Has the identical flex/frequency of all other NV weights • Designed for the player seeking a heavier shaft • Also great for fairway woods NVS HYBRID 85 HYBRID SHAFTS code AL0003H AL0003H flex R S playability trim butt factor code dia. 3B2H IR1 .630" 4B2H IR1 .630" NV HYBRID 85 • Take advantage of NVS technology in hybrid/utility clubs • Same great feel and performance as NVS wood shafts NV IRON COMP 85 IRON SHAFTS-.370" code AL0017 AL0017 AL0017 flex A R S playability trim butt factor code dia. 2B1H IR1 .620" 3B1H IR1 .625" 4B1H IR1 .625" tip dia. .370" .370" .370" weight length torque 86 gm. 40.5"-36.5" 3.0° 86 gm. 40.5"-36.5" 2.6° 86 gm. 40.5"-36.5" 2.5° NV IRON COMP 85 • Same Micro-Laminate Technology construction as the NV Iron shaft. • Lighter weight promotes superior performance in this new iron shaft version NV GRAPHITE IRON IRON SHAFTS-.370" code flex AL0007IS Pro R Pro S IRON SHAFTS-.355" AL0008IS Pro R Pro S Tour S playability trim butt factor code dia. tip dia. weight length torque NV GRAPHITE IRON each 3B1H 4B1H IR1 IR1 .625" .625" .370" .370" 105 105 41"-37" 41"-37" 2.4° 2.4° 2" 2" Mid/High Med/Firm Mid/High Med/Firm $383.50 $47.99 $383.50 $47.99 3B1H 4B1H 4C1H IR1 IR1 IR1 .625" .625" .625" .355" .355" .355" 105 105 130 41"-37" 41"-37" 41"-37" 2.4° 2.4° 1.5° – – – Mid/High Med/Firm $383.50 $47.99 Mid/High Med/Firm $383.50 $47.99 Mid/High Med/Firm $383.50 $47.99 trim code W21 W21 W21 W21 butt dia. .625" .630" .625" .625" tip dia. .335" .335" .335" .335" torque 3.6 3.6 2.8 2.8 parallel tip sect. 3" 3" 3" 3" • Same Micro-Laminate Technology construction of the NV Wood shaft. • Very low torque for consistency in dispersion and launch • No "boardy" feel like other "Tour" graphite iron shafts • Individual #2 and #W shafts available: AL0007I (.370" tip) $47.99 each AL0008I (.355" tip) $47.99 each NV PROTOPYPE WOOD SHAFTS code AL0010W AL0010W AL0010W AL0010W 170 - .335" TIP playability flex factor 60 S 4B1M 60 X 5B1H 70 S 4B1H 70 X 5B1H weight 63 gm. 65 gm. 73 gm. 74 gm. length 46" 46" 46" 46" 800.848.8358 • www.golfworks.com bend tip point stiffness mid/high stiff mid/high stiff mid/high stiff mid/high stiff PROTOTYPE WOOD each $125.99 $125.99 $125.99 $125.99 • All the features of the popular NV shaft but with Nanotube technology that results in a very tip stiff design that still maintains feel and performance • Produces a lower ball flight and incredibly tight shot dispersion 0109 P. 168-172 Aldila:0507 P. 195-199-Aldila 12/19/08 3:45 PM Page 171 ALDILA NV 55/65/75/85 WOOD SERIES WOOD SHAFTS-55 code AL202201 AL202201 AL202201 AL202201 tip dia. .335" .335" .335" .335" weight 57 gm. 57 gm. 59 gm. 59 gm. length 46" 46" 46" 46" torque 3.9˚ 3.9˚ 3.9˚ 3.9˚ parallel bend tip sect. point 3" mid 3" mid 3" mid/high 3" mid/high tip stiffness medium medium med/firm med/firm each $67.99 $67.99 $67.99 $67.99 playability factor 3B2M 4B2M 5B2M 3B2M 4B2M 5B2M trim code W21 W21 W21 W21 W21 W21 butt dia. .620" .625" .625" .620" .625" .625" tip dia. .335" .335" .335" .350" .350" .350" weight 68 gm. 69 gm. 69 gm. 68 gm. 69 gm. 69 gm. length 46" 46" 46" 46" 46" 46" torque 3.5˚ 3.5˚ 3.5˚ 3.5˚ 3.5˚ 3.5˚ parallel tip sect. 3" 3" 3" 3" 3" 3" bend point mid/high mid/high mid/high mid/high mid/high mid/high tip stiffness med/firm med/firm med/firm med/firm med/firm med/firm each $67.99 $67.99 $67.99 $67.99 $67.99 $67.99 playability factor 3B1H 4B1H 5B1H 3B1H 4B1H 5B1H trim code W21 W21 W21 W21 W21 W21 butt dia. .620" .625" .625" .620" .625" .625" tip dia. .335" .335" .335" .350" .350" .350" weight 78 gm. 78 gm. 79 gm. 78 gm. 78 gm. 79 gm. length 46" 46" 46" 46" 46" 46" torque 2.8˚ 2.8˚ 2.8˚ 2.8˚ 2.8˚ 2.8˚ parallel tip sect. 3" 3" 3" 3" 3" 3" bend point mid/high mid/high mid/high mid/high mid/high mid/high tip stiffness med/firm med/firm med/firm med/firm med/firm med/firm each $67.99 $67.99 $67.99 $67.99 $67.99 $67.99 playability trim butt flex factor code dia. R 3B2H W21 .620" S 4B2H W21 .625" X 5B2H W21 .625" tip dia. .335" .335"" .335" weight 87 gm. 88 gm. 89 gm. length 46" 46" 46" torque 2.6˚ 2.6˚ 2.6˚ parallel bend tip sect. point 3" mid/high 3" mid/high 3" mid/high butt dia. .615" .625" .625" .625" tip dia. .335" .335" .335" .335" weight 55 gm. 57 gm. 67 gm. 67 gm. length 46" 46" 46" 46" torque 4.6° 3.9° 3.9° 3.9° parallel bend tip tip sect. point stiffness 3" low/mid med/firm 3" mid medium 3" mid/high med/firm 3" mid/high med/firm playability trim butt factor code dia. 1D2S IR1 .600" tip dia. .370" weight 57 gm. length 42" torque 5.0˚ parallel tip sect. 5" tip stiffness medium each $47.99 tip dia. .370" .370" weight 82 gm. 82 gm. length 42" 42" torque 2.6˚ 2.6˚ parallel bend tip tip sect. point stiffness 3" low/mid med/soft 3" low/mid med/soft each $47.99 $47.99 WOOD SHAFTS-65 code 1205W 1205W 1205W 1205W35 1205W35 1205W35 flex R S X R S X WOOD SHAFTS-75 code 1205W 1205W 1205W 1205W35 1205W35 1205W35 flex R S X R S X • Micro Laminate Technology uses exclusive, ultra-thin areospace grade prepreg that produces a shaft with unmatched consistency NV 65 • Constant taper design produces uniform feel and performance • No "dead spots" or inconsistent flex zones NV 75 • Has the identical flex/frequency of all other NV weights • Designed for the player seeking a heavier shaft NV 85 WOOD SHAFTS-85 code 1205W 1205W 1205W NV 55 playability trim butt factor code dia. 2B2M W21 .625" 3B2M W21 .625" 4B1M W21 .625" 5B1M W21 .625" flex A R S X tip stiffness each med/firm $67.99 med/firm $67.99 med/firm $67.99 • Has the identical flex/frequency of all other NV weights • Designed for the player seeking a heavier shaft • Also great for use in fairway woods NV PINK WOOD SHAFTS code AL0009W AL0009W AL0009W AL0009W - .335" TIP playability flex factor 55 L 1B2M 55 A 2B2M 65 R 3B2M 65 S 4B2M HYBRID SHAFTS code AL0016 flex L trim code W21 W21 W21 W21 bend point mid each $67.99 $67.99 $67.99 $67.99 NV PINK • Features micro-laminate technology • Hybrid shaft available NV HYBRID HYBRID SHAFTS-85 code AL205201 AL205201 flex R S playability trim butt factor code dia. 3B2H IR1 .625" 4B2H IR1 .625" NV HYBRID 85 • Utilizes NV technology in hybrid/utility shafts • Same performance and feel as NV wood shafts Go To: www.golfworks.com — Open 24 Hours Per Day! 171 0109 P. 168-172 Aldila:0507 P. 195-199-Aldila 1/6/09 11:13 AM Page 172 ALDILA LOW TORQUE WOOD SHAFTS code 1204W 1204W 1204W flex L R S A GOLFWORKS EXCLUSIVE! playability trim butt factor code dia. 1D3S W7 .590" 3D3S W7 .600" 4D3S W7 .605" tip dia. .335" .335" .335" weight 72 gm. 74 gm. 78 gm. length 45" 45" 45" torque 5.3˚ 5.2˚ 5.0˚ parallel tip sect. 4" 4" 4" bend point low low low tip stiffness soft soft soft .370" .370" .370" 77 gm. 82 gm. 84 gm. 40" 40" 40" 4.7˚ 4.6˚ 4.5˚ 5" 5" 5" low low low soft soft soft IRON SHAFTS 1204I 1204I 1204I L R S 1D3S 3D3S 4D3S IR3 IR3 IR3 .585" .600" .605" LOW TORQUE each $17.99 $17.99 $17.99 each $15.99 $15.99 $15.99 • Great choice for beginning to average players • Clubmaker's choice for consistency and value ORDER YOUR SHAFTS TIP PREPPED FOR ONLY $2.95! code:RSPREP GAMER - WOODS/IRONS/HYBRIDS WOOD SHAFTS code AL0011W AL0011W AL0011W AL0011W flex L A R S playability trim butt factor code dia. 1D3M W1 .590" 2B2M W1 .600" 3B2M W1 .600" 4B2M W1 .600" tip dia. .335" .335" .335" .335" weight 62 gm. 61 gm. 63 gm. 64 gm. length 46" 46" 46" 46" torque 4.5 3.8 3.8 3.8 parallel bend tip tip sect. point stiffness 3.5" mid-low soft 4" mid medium 4" mid medium 4" mid medium .370" .370" .370" .370" 59 gm. 82 gm. 85 gm. 86 gm. 40" 41" 41" 41" 4.5 3.2 3.2 3.2 5.5" 5.5" 5.5" 5.5" 42" 42" 44" 44" 2.8° 2.8° 2.8° 2.8° 3.5" 3.5" 3.5" 3.5" IRON SHAFTS AL0012I AL0012I AL0012I AL0012I L A R S 1D3M 2B2H 3B2H 4B2H IR21 IR21 IR21 IR21 .590" .590" .595" .595" R S R S 3B2H 4B2H 3B2H 4B2H see pg. 146 see pg. 146 see pg. 146 see pg. 146 mid-low soft mid medium mid medium mid medium each $32.99 $32.99 $32.99 $32.99 each $19.99 $19.99 $19.99 $19.99 GAMER WOODS, IRONS & HYBRIDS • Wood shaft provides stability and penetrating trajectory • Iron shaft promotes distance and control for golfers of all levels • Hybrid shaft design helps eliminate "ballooned shots” • Tour-proven design that means ”Game Over” for other hybrid shafts on the market . HYBRID SHAFTS AL0005H AL0005H AL0006H AL0006H WOOD SHAFTS code VXWAL VXBW flex L/A R/S playability trim factor code 1/2D3S W5/W15 3/4B2S W5/W15 .595" .595" .595" .595" .370" .370" .335" .335" 83 gm. 87 gm. 83 gm. 87 gm. butt dia. .585" .600" tip dia. .335" .335" weight 79 gm. 88 gm. length 46" 46" torque 5.6˚ 5.4˚ 1/2D3S IR6/IR12 .580" 3/4B2S IR6/IR12 .600" .370" .370" 81 gm. 87 gm. 41" 41" 4.6˚ 4.2˚ mid mid mid mid medium medium medium medium parallel bend tip tip sect. point stiffness 7" low soft 7" mid/low med/soft IRON SHAFTS VXIAL VXBI L/A R/S 6" 6" low soft mid/low med/soft $31.99 $31.99 $32.99 $32.99 VALUE SERIES each $12.99 $12.99 each $12.99 $12.99 • Affordable graphite upgrade choice • Designed for higher handicap players • L/A woods and irons offered in Black or Platinum • 100% Graphite N-GAGE A GOLFWORKS EXCLUSIVE! WOOD SHAFTS code AL0022 AL0022 AL0022 AL0022 AL0022 172 flex 55A 55R 55S 65R 65S playability trim butt factor code dia. 2D2S W21 .590" 3B2S W21 .600" 4B2S W21 .605" 3B1M W21 .600" 4B1M W21 .605" tip dia. .335" .335" .335" .335" .335" weight 55 gm. 55 gm. 56 gm. 65 gm. 65 gm. length 46" 46" 46" 46" 46" torque 5.0˚ 5.0˚ 5.0˚ 4.1˚ 4.1˚ parallel bend tip sect. point 3" mid 3" mid 3" mid 3" mid/high 3" mid/high tip stiffness med/soft med/soft med/soft med/soft med/soft N-GAGE each $39.99 $39.99 $39.99 $39.99 $39.99 Call Toll Free: 800.848.8358 • Manufactured with the same Micro Laminate Technology featured in the popular NV and NVS models • Constant taper design produces consistent performance and smooth feel • Multiple weight and flex options provide a wide variety of fitting options 0109 P. 173 Mitsu:0507 P. 200-203-Mitsu 1/6/09 4:15 PM Page 173 JAVLNFXTM V-SERIES JAVLNFX™ V-SERIES WOOD SHAFTS code MR0011 MR0011 MR0011 MR0011 MR0011 flex 63R 63S 63X 73S 73X playability factor 3B2M 4B2M 5B2M 4B2M 5B2M trim code W10 W10 W10 W10 W10 butt dia. .600" .600" .600" .600" .600" tip dia. .335" .335" .335" .335" .335" butt dia. .600" .600" .600" .600" .600" .600" .600" .600" tip dia. .335" .335" .335" .335" .335" .335" .335" .335" butt dia. .600" .600" .600" .600" tip dia. .370" .370" .370" .370" weight 63 gm. 65 gm. 66 gm. 73 gm. 75 gm. length 46" 46" 46" 46" 46" torque 4.2° 4.1° 4.0° 3.9° 3.8° parallel tip sect. 3" 3" 3" 3" 3" bend point mid/high mid/high mid/high mid/high mid/high tip stiffness medium medium medium medium medium torque 4.3° 4.2° 4.1° 3.9° 3.9° 3.8° 3.9° 3.9° parallel tip sect. 4" 4" 4" 4" 4" 4" 4" 4" bend point mid/high mid/high mid/high mid/high mid/high mid/high mid/high mid/high tip stiffness stiff stiff stiff stiff stiff stiff stiff stiff torque 3.6° 3.5° 3.3° 3.3° parallel tip sect. 4" 4" 4" 4" bend point mid mid mid mid tip stiffness stiff stiff stiff stiff each $135.00 $135.00 $135.00 $135.00 $135.00 • Same unparalleled premium feel and performance that defines Mitsubishi Rayon • Smooth bend profile combined with a mid to moderate torque • Perfect balance between high performance and playability • Varying weight/torque profiles provide a more specialized fitting JAVLNFXTM WOOD JAVLNFX™ WOOD WOOD SHAFTS code MR0007 MR0007 MR0007 MR0007 MR0007 MR0007 MR0007 MR0007 flex 63R 63S 63X 73R 73S 73X 83S 83X playability factor 3B1M 4B1M 5B1M 3B1M 4B1M 5B1M 4B1M 5B1M trim code W10 W10 W10 W10 W10 W10 W10 W10 weight 61 gm. 63 gm. 65 gm. 69 gm. 71 gm. 73 gm. 78 gm. 81 gm. length 46" 46" 46" 46" 46" 46" 46" 46" each $150.00 $150.00 $150.00 $150.00 $150.00 $150.00 $150.00 $150.00 • Features a stable tip section with out sacrificing responsiveness or feel • Delivers outstanding performance and the stability required by today’s more demanding player JAVLNFXTM HYBRID JAVLNFX™ HYBRID HYBRID SHAFTS code MR0008 MR0008 MR0008 MR0008 flex 70R 70S 90S 90X playability factor 3B1M 4B1M 4B1M 5B1M trim code IR17 IR17 IR17 IR17 weight 71 gm. 73 gm. 93 gm. 95 gm. length 42" 42" 42" 42" each $100.00 $100.00 $100.00 $100.00 • Complements the performance characteristics of the JAVLNFX wood shafts • Provides versatility in fitting many types of hybrid designs JAVLNFXTM IRON JAVLNFX™ IRON IRON SHAFTS code MR0009 MR0009 flex R S playability factor 3B2H 4B2H trim code IR31 IR31 butt dia. .600" .600" tip dia. .370" .370" weight 79 gm. 81 gm. length 40" 40" torque 3.2° 3.2° parallel tip sect. 5" 5" bend point mid mid tip stiffness medium medium each $70.00 $70.00 • Performance characteristics are designed to match the JAVLNFX wood shaft • Provides the balance and stability that are needed in a graphite iron shaft Go To: www.golfworks.com — Open 24 Hours Per Day! 173 0109 P. 174-177 Graph.Des.Robin:0507 P. 206-207-Graph.Des. 12/19/08 3:55 PM Page 174 0109 P. 174-177 Graph.Des.Robin:0507 P. 206-207-Graph.Des. 12/19/08 3:56 PM Page 175 AXE XCALIBER 5 WOOD SHAFTS code AS0002 AS0002 AS0002 AS0002 flex L A R S playability trim factor code 1D3M W1 2D3M W2 3B3M W2 4B2M W2 bend point low low low low XCALIBER 5 butt dia. .600" .600" .600" .600" tip dia. .335" .335" .335" .335" weight 54 gm. 56 gm. 57 gm. 58 gm. length 46" 46" 46" 46" parallel torque tip sect. 4.5˚ 3.5" 4.5˚ 3.5" 4.3˚ 3.5" 4.2˚ 3.5" tip stiffness med/soft med/soft med/soft medium each $49.99 $49.99 $49.99 $49.99 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 60 gm. 62 gm. 64 gm. length 46" 46" 46" parallel bend tip torque tip sect. point stiffness 3.4˚ 3.5" low/mid medium 3.4˚ 3.5" low/mid medium 3.4˚ 3.5" low/mid medium each $49.99 $49.99 $49.99 butt dia. .600" .600" tip dia. .335" .335" weight 64 gm. 65 gm. length 46" 46" parallel bend tip torque tip sect. point stiffness 3.1˚ 3.5" high/mid med/stiff 3.1˚ 3.5" high/mid med/stiff each $49.99 $49.99 butt dia. .600" .600" tip dia. .335" .335" weight 72 gm. 73 gm. length 47" 47" parallel torque tip sect. 2.7˚ 3.5" 2.7˚ 3.5" bend point high high tip stiffness med/stiff med/stiff each $49.99 $49.99 tip dia. .335" .335" .335" weight 75 gm. 75 gm. 75 gm. length 45" 45" 45" parallel torque tip sect. 3.0˚ 5" 3.0˚ 5" 3.0˚ 5" bend point mid mid mid tip stiffness medium medium medium each $29.99 $29.99 $29.99 • Designed utilizing new Ballistic Integrated Mechanics (BIM) flight software • Final designs approved after over 125 hours player testing • Higher launch, lower spin to max distance, soft feel XCALIBER 6 WOOD SHAFTS code AS0003 AS0003 AS0003 flex A R S playability trim factor code 2B2M W2 3B2M W2 4B2M W2 XCALIBER 6 • Designed utilizing new (BIM) flight software • Final designs approved after over 125 hours player testing • Mid/high-launch, reduced spin for max distance XCALIBER 6+ WOOD SHAFTS code AS0004 AS0004 flex R S playability trim factor code 3B2M W2 4B1M W2 XCALIBER 6+ • Mid Launch profile for higher clubhead speeds • Designed utilizing new (BIM) flight software • Final designs approved after over 125 hours player testing XCALIBER 7 WOOD SHAFTS code AS0005 AS0005 flex S Tour S playability trim factor code 4B1H W2 4.5B1H W2 XCALIBER 7 • Lowest torque rating at this weight in the industry • Designed utilizing new (BIM) flight software • Final designs approved after over 125 hours player testing XCALIBER FW WOOD SHAFTS code AS0006 AS0006 AS0006 flex A R S playability trim factor code 2B2M W19 3B2M W19 4B2M W19 butt dia. .600" .600" .600" XCALIBER FW • Designed utilizing new (BIM) flight software • Final designs approved after over 125 hours player testing • Designed for higher flight, softer feel Go To: www.golfworks.com — Open 24 Hours Per Day! 175 0109 P. 174-177 Graph.Des.Robin:0507 P. 206-207-Graph.Des. 12/19/08 3:56 PM Page 176 AURA WOOD SHAFTS code GD0022 flex L playability trim factor code 1D3S W5 butt dia. .605" tip dia. .335" weight 56 gm. length 46" parallel torque tip sect. 5.9˚ 4.0" AURA LADIES - GREEN bend point low tip stiffness soft each $49.99 BLUE GD0021 GD0021 GD0021 GD0021 AURA HIGH LAUNCH - BLUE A R S X 2D3M 3D3M 4B3M 5B3M W5 W5 W5 W5 .595" .600" .600" .600" .335" .335" .335" .335" 64 gm. 65 gm. 66 gm. 67 gm. 46" 46" 46" 46" 4.9˚ 4.9˚ 4.9˚ 4.9˚ 3.0" 3.0" 3.0" 3.0" low low low low soft soft soft soft $49.99 $49.99 $49.99 $49.99 A R S X 2D3M 3B2M 4B2M 5B2M W5 W5 W5 W5 .595" .600" .600" .600" .335" .335" .335" .335" 64 gm. 65 gm. 66 gm. 67 gm. 46" 46" 46" 46" 4.8˚ 4.8˚ 4.8˚ 4.8˚ 3.0" 3.0" 3.0" 3.0" mid mid mid mid medium medium medium medium $49.99 $49.99 $49.99 $49.99 S X 4C1H 5C1H W5 W5 .615" .620" .335" .335" 68 gm. 70 gm. 47" 47" 3.2˚ 3.2˚ 3.0" 3.0" high high firm firm $69.99 $69.99 GOLD GD0020 GD0020 GD0020 GD0020 RED GD0019 GD0019 176 • Designed for slower swing tempos and club head speeds Call Toll Free: 800.848.8358 • Suits the player in search of high launch and spin combination AURA MID LAUNCH - GOLD • Produces a medium launch • Maximizes distance without compromising accuracy AURA PRO - RED • Stiff tip profile produces a flatter “tour-preferred” launch • Profile suits the golfer with 95+ MPH swing speed 0109 P. 174-177 Graph.Des.Robin:0507 P. 206-207-Graph.Des. 12/23/08 11:08 AM Page 177 GRAPHITE DESIGN TOUR AD YS-Q WOOD SHAFTS code GD0016 GD0016 GD0016 flex 65R 65S 65X playability trim factor code 3B1M W2 4B1M W2 5B1M W2 parallel torque tip sect. 3.7˚ 4" 3.7˚ 4" 3.7˚ 4" bend point mid mid mid tip stiffness each low $145.99 low $145.99 low $145.99 tip dia. .335" .335" .335" weight 67 gm. 67 gm. 67 gm. length 46" 46" 46" IR22 IR22 .595" .595" .370" .370" 87 gm. 87 gm. 42" 42" playability trim factor code 1D3M W2 3B2M W2 4B2M W2 5B2M W2 3B2H W2 4B2H W2 5B1H W2 3B2H W2 4B2H W2 5B1H W2 butt dia. .600" .600" .600" .600" .600" .600" .600" .600" .600" .600" tip dia. .335" .335" .335" .335" .335" .335" .335" .335" .335" .335" weight 55 gm. 57 gm. 59 gm. 62 gm. 68 gm. 69 gm. 73 gm. 77 gm. 79 gm. 81 gm. length 46" 46" 46" 46" 46" 46" 46" 46" 46" 46" parallel torque tip sect. 4.5˚ 4" 4.5˚ 4" 4.5˚ 4" 4.5˚ 4" 3.4˚ 4"" 3.4˚ 4" 3.4˚ 4" 3.0˚ 4" 3.0˚ 4" 3.0˚ 4" butt dia. .615" .615" tip dia. .335" .335" weight 56 gm. 56 gm. length 46" 46" torque 4.0˚ 4.0˚ parallel bend tip tip sect. point stiffness 4" mid/low med/soft 4" mid/low med/soft each $69.99 $69.99 playability trim butt factor code dia. 3B2M W2 .600" 4B2M W2 .600" 4.5B2M W2 .600" tip dia. .335" .335" .335" weight 65 gm. 66 gm. 67 gm. length 46" 46" 46" torque 3.5˚ 3.5˚ 3.5˚ parallel tip sect. 4" 4" 4" bend tip point stiffness mid med/firm mid med/firm mid med/firm each $69.99 $69.99 $69.99 • Ultralight, proven performer on the PGA Tour in all major brand head styles • .350" tip available (YS635WPL) playability trim butt factor code dia. 4B1H W2 .600" 4.5B1H W2 .600" tip dia. .335" .335" weight 78 gm. 79 gm. length 46" 46" torque 3.0˚ 3.0˚ parallel bend tip tip sect. point stiffness 4" mid/high firm 4" mid/high firm each $69.99 $69.99 • Designed for larger heads, controlling accuracy through a unique tip flex design • .350" tip available (YS735WPL) playability factor 3B2H 4B2H tip dia. .370" .370" weight 85 gm. 85 gm. length 42" 42" torque 2.6˚ 2.6˚ parallel tip sect. 5.0" 5.0" bend tip point stiffness mid med/firm mid med/firm each $59.00 $59.00 HYBRID SHAFTS GD0017 GD0017 TOUR AD YS-Q butt dia. .595" .600" .605" 85R 85S 3B1H 4B1H 2.6˚ 2.6˚ 5.0"" 5.0"" mid mid low low $85.99 $85.99 bend point mid/low mid/low mid mid/high low/mid mid mid/high low/mid mid mid/high tip stiffness soft medium medium firm medium medium firm medium medium firm each $86.99 $86.99 $86.99 $86.99 $86.99 $86.99 $86.99 $86.99 $86.99 $86.99 • Tour Ad engineering and 4-axis weave material combine with YS performance and feel • Mid-Launch design ideal for smooth yet powerful swing tempos PERSHING WOOD SHAFTS code GD0009 GD0009 GD0009 GD0009 GD0009 GD0009 GD0009 GD0009 GD0009 GD0009 flex 55L 55R 55S 55X 65R 65S 65X 75R 75S 75X PERSHING • Wide variety of shaft weights provide a match for drivers and fairway woods • Combinations of bend points and tip stiffnesses provide fitting options for a wide variety of players YS+ SERIES YS-5+ WOOD SHAFTS code flex GD202204PL R GD202204PL S YS-6+ WOOD SHAFTS code flex YS633WPL R YS633WPL S YS633WPL X YS-7+ WOOD SHAFTS code flex YS733WPL S YS733WPL X YS-HYBRID+ SHAFTS code GD0018 GD0018 flex R S playability factor 3B2M 4B2M trim code W2 W2 trim code IR22 IR22 butt dia. .595" .595" YS-5+ • Ultralight, specifically designed for golfers with slow to medium swing speeds YS-6+ YS-7+ YS-HYBRID+ • Multiple victories worldwide on the PGA, LPGA, Nationwide, and Champions Tours G-TECH SERIES WOOD SHAFTS code GD0011 GD0011 flex L/A R/S playability trim factor code 1/2D2M W5/W15 3/4B2M W5/W15 G-TECH butt dia. .595" .605" tip dia. .335" .335" weight 69 gm. 74 gm. length 47" 47" torque 4.7˚ 5.0˚ parallel tip sect. 5" 5" bend point low mid tip stiffness soft medium each $16.99 $16.99 1/2D2M IR20/IR29 .595" 3/4B2M IR20/IR29 .600" .370" .370" 77 gm. 80 gm. 41" 41" 3.5˚ 3.5˚ 6" 6" low mid soft medium $16.99 $16.99 IRON SHAFTS GD0012 GD0012 L/A R/S • Combination flex shaft available for woods (GD0011) or irons (GD0012) • L/A flex (silver color) and R/S flex (black color) available Go To: www.golfworks.com — Open 24 Hours Per Day! 177 0109 P. 178-179 Aero Fujikura:0507 P. 214-Aero 12/19/08 4:08 PM Page 178 AEROTECH STEELFIBER 65/75 WOOD SHAFTS-65 code AT0001W AT0001W flex R S WOOD SHAFTS-75 code AT0002W AT0002W flex R S playability factor 3B2M 4B2M trim code W2 W2 butt dia. .600" .600" tip dia. .335" .335" playability trim butt factor code dia. 3B2M W23 .600" 4B2M W23 .600" tip dia. .335" .335" weight 66 gm. 66 gm. length 46" 46" STEELFIBER 65 torque 4.6˚ 4.3˚ parallel tip sect. 3.5" 3.5" bend point mid mid tip stiffness medium medium bend point mid mid tip stiffness medium medium each $43.50 $43.50 each $44.50 $44.50 • Promotes slightly higher trajectory and lower spin rates for modern oversized clubheads • Lightest SteelFiber shaft made STEELFIBER 75 weight 75 gm. 75 gm. length 46" 46" torque 4.0˚ 3.8˚ parallel tip sect. 5" 5" weight 78 gm. 80 gm. 72 gm. 72 gm. length 42" 42" 44" 44" torque 3.3˚ 3.0˚ 3.8˚ 3.6˚ parallel tip sect. 3.9" 3.9" 4.1" 4.1" bend point mid mid mid mid tip stiffness medium medium medium medium each $37.00 $37.00 $37.00 $37.00 bend point mid mid • The most popular SteelFiber shaft of Tour Professionals • Control and distance are combined in perfect harmony with this shaft STEELFIBER 75 HYBRID HYBRID SHAFTS code AT0008H AT0008H AT0009H AT0009H flex R S R S playability trim butt factor code dia. 3B2M IR2 .600" 4B2M IR2 .604" 3B2M W19 .600" 4B2M W19 .600" tip dia. .370" .370" .335" .335" STEELFIBER 75 HYBRID • Low torque for better control off the fairway and out of rough • Tip soft enough to get the ball airborne easily • Perfect transition from irons to woods STEELFIBER 80/95 IRON IRON SHAFTS-80 code AT0004I AT0004I flex R S IRON SHAFTS-95 code AT0003I AT0003I flex R S STEELFIBER 80 IRON playability trim butt factor code dia. 3B2H IR21 .600" 4B2H IR21 .600" tip dia. .370" .370" weight 85 gm. 85 gm. length 41" 41" torque 2.9˚ 2.9˚ parallel tip sect. 5.5" 5.5" tip stiffness medium medium each $34.50 $34.50 playability trim butt factor code dia. 3B1H IR21 .602" 4B1H IR21 .602" tip dia. .370" .370" weight 95 gm. 95 gm. length 41" 41" torque 2.5˚ 2.4˚ parallel bend tip tip sect. point stiffness 5.25" mid medium 5.25" mid/high med/firm each $37.00 $37.00 playability trim butt factor code dia. 2B2M W23 .585" 3B2M W23 .600" tip dia. .335" .335" weight 51 gm. 51 gm. length 46" 46" torque 4.9˚ 4.6˚ parallel tip sect. 3.5" 3.5" bend point mid mid tip stiffness medium medium each $38.50 $38.50 playability trim butt factor code dia. 3B2M W23 .600" 4B2M W23 .600" tip dia. .335" .335" weight 63 gm. 66 gm. length 46" 46" torque 3.5˚ 3.1˚ parallel tip sect. 4.5" 3.5" bend point mid mid tip stiffness medium medium each $36.50 $36.50 tip dia. .370" .370" weight 83 gm. 86 gm. length 41" 41" torque 2.5˚ 2.4˚ parallel tip sect. 5" 5" bend point mid mid tip stiffness medium medium each $23.50 $23.50 • Designed for the player looking to gain distance, without sacrificing control STEELFIBER 95 IRON • Designed to give the strongest players a true alternative to steel • At 95 grams, is a perfect shaft for those players making the transition from steel to composite POWERCOIL 50/65 WOOD SHAFTS-50 code AT0006W AT0006W flex A R WOOD SHAFTS-65 code AT0005W AT0005W flex R S POWERCOIL 50 • Designed with Aerotechs Powercoil technology, which holds the shaft round for added stability and more consistent contact with the ball POWERCOIL 65 • Aerotech’s Powercoil technology combined with low torque make this shaft stable enough for even the most powerful swingers POWERCOIL 85 IRON IRON SHAFTS code AT0007I AT0007I 178 flex R S playability factor 3B2M 4B2M trim code IR21 IR21 butt dia. .600" .600" POWERCOIL 85 IRON Call Toll Free: 800.848.8358 • As the predecessor to the SteelFiber iron shaft, the Powercoil 85 incorporates a thin metal wire integrated between the graphite layers giving it similar playing characteristics of the SteelFiber iron 0109 P. 178-179 Aero Fujikura:0507 P. 214-Aero 12/19/08 4:09 PM Page 179 FUJIKURA The full range of Fujikura products are available for reshafting via The GolfWorks Retail Outlet, an authorized Fujikura Charter Dealer. Please contact Customer Service at 800-848-8358 for pricing and details. SAISHIN WOOD SHAFTS code FK0051 FK0051 FK0051 flex A/R2 R S playability factor 2B2H 3B2H 4B2H trim code W32 W32 W32 butt dia. .600" .600" .600" tip dia. .335" .335" .335" torque 4.8˚ 5˚ 5˚ parallel tip sect. 4" 4" 4" bend tip point stiffness low soft low med/soft low medium trim code W32 W32 W32 butt dia. .600" .600" .600" tip dia. .335" .335" .335" length 46" 46" 46" bend point low low low weight 55 gm. 56 gm. 57 gm. trim code W32 W32 W32 butt dia. .600" .600" .600" tip dia. .335" .335" .335" weight 64 gm. 66 gm. 66 gm. trim butt code dia. W32 .600" tip dia. .335" weight 54 gm. weight 64 gm. 65 gm. 66 gm. length 46" 46" 46" SAISHIN each $49.99 $49.99 $49.99 • Ultra-lightweight shaft designed for golfers with moderate swing speeds • Stable, yet softer-tip model E150 WOOD SHAFTS code FK0023 FK0023 FK0023 playability flex factor A/R2 2B1M R 3D3M S 4B3M E150 torque 4.5˚ 4.5˚ 4.5˚ parallel tip sect. 4" 4" 4" tip stiffness soft soft soft each $65.99 $65.99 $65.99 length 46" 46" 46" torque 4.5˚ 4.5˚ 4.5˚ parallel bend tip tip sect. point stiffness 4" mid/low med/soft 4" mid/low med/soft 4" mid/low med/soft each $65.99 $65.99 $65.99 length 45" torque 4.9˚ parallel bend tip tip sect. point stiffness 4" mid/low med/soft each $65.99 • Designed specifically for the player who is ready to get better but not yet ready for the Tour • Higher spin and high launch pro file allow for great accuracy and distance with a minimum of effort E160 WOOD SHAFTS code FK0024 FK0024 FK0024 flex A/R2 R S playability factor 2D3M 3B2M 4B2H E160 • Heavier than E150 Series • Slightly higher bend point than E150 Series • E160 Hybrid and E160 Iron shafts also available by special order SAKURA WOOD SHAFTS code FK0008 flex L playability factor 1B2M SAKURA • Bend point and tip stiffness combination provide optimal launch and spin conditions • Lightweight design encourages increased swing speed Go To: www.golfworks.com — Open 24 Hours Per Day! 179 0109 P. 180-183 True Temper:0507 P. 215-218-True Temper 12/19/08 4:10 PM Page 180 0109 P. 180-183 True Temper:0507 P. 215-218-True Temper 12/19/08 4:10 PM Page 181 TRUE TEMPER TAPER DYNAMIC GOLD HIGH LAUNCH AVAILABLE DYNAMIC GOLD HIGH LAUNCH IRON SHAFTS playability trim flex factor code butt dia. tip dia. weight TT0028 R300 3B3H IR2 .600" .370" 117 gm. TT0028 S300 4B3H IR2 .600" .370" TT0028 X100 5B3H IR2 .600" .370" TT0029 R300 3B3H IR1 TT0029 S300 4B3H TT0029 X100 5B3H code length bend point tip stiffness each 41" low soft $14.19 122 gm. 41" low soft $14.19 127 gm. 41" low soft $14.19 .600" .355" 111 gm. 37-41" low soft $14.29 IR1 .600" .355" 116 gm. 37-41" low soft $14.29 IR1 .600" .355" 121 gm. 37-41" low soft $14.29 DYNAMIC GOLD HIGH LAUNCH WITH SENSICORE CODES: TT0031 (.355" TIP) $18.59 DYNAMIC GOLD SL .350” TIP TT0030 (.370" TIP) $18.49 TAPER AVAILABLE AVAILABLE WOOD SHAFTS code TT0009W TT0009W TT0009W TT0010W TT0010W TT0010W playability trim flex factor code butt dia. tip dia. weight R300 S300 X100 R300 S300 X100 3C1H 4C1H 5C1H 3C1H 4C1H 5C1H W2 W2 W2 W2 W2 W2 .600" .600" .600" .600" .600" .600" .335" .335" .335" .350" .350" .350" 105 gm. 106 gm. 107 gm. 105 gm. 106 gm. 107 gm. R300 S300 X100 R300 S300 X100 3B1H 4C1H 5C1H 3B1H 4C1H 5C1H IR2 IR2 IR2 IR1 IR1 IR1 .600" .600" .600" .600" .600" .600" .370" .370" .370" .355" .355" .355" 106 gm. 106 gm. 109 gm. 106 gm. 106 gm. 109 gm. length bend point tip stiffness 46" 46" 46" 46" 46" 46" high high high high high high firm firm firm firm firm firm $15.99 $15.99 $15.99 $15.99 $15.99 $15.99 each 41" 41" 41" 41"-37" 41"-37" 41"-37" high high high high high high firm firm firm firm firm firm $15.49 $15.49 $15.49 $15.59 $15.59 $15.59 IRON SHAFTS TT201105 TT201105 TT201105 TT2016 TT2016 TT2016 DYNAMIC GOLD SL WITH SENSICORE CODES: each code DYNAMIC GOLD™ butt dia. tip dia. TAPER length bend point tip stiffness weight .600" .600" .600" .335" .335" .335" 125 gm. 127 gm. 124 gm. 46" 46" 46" high high high firm firm firm .600" .600" .600" .370" .370" .370" 127 gm. 130 gm. 130 gm. 41" 41" 41" high high high firm firm firm .600" .600" .600" .355" .355" .355" 127 gm. 130 gm. 130 gm. 37-41" 37-41" 37-41" high high high firm firm firm tip stiffness .350” TIP AVAILABLE each DYNAMIC GOLD W/ SENSICORE® $17.99 $17.99 $17.99 each $17.49 $17.49 $17.49 each $17.99 $17.99 $17.99 • The No. 1 shaft in golf is also offered with Sensicore® • This high-flex, tourweight shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy. • Steel consistency with graphite feel TAPER AVAILABLE WOOD SHAFTS code UDGW UDGW UDGW UDG35W UDG35W UDG35W playability trim flex factor code R300 3C1M S300 4C1M X100 5C1M R300 3C1M S300 4C1M X100 5C1M IRON SHAFTS - PARALLEL UDGI R300 3C1M UDGI S300 4C1M UDGI X100 5C1M IRON SHAFTS - TAPER DGI R300 3C1M DGI S300 4C1M DGI X100 5C1M • Superlite, stiff-tip steel iron shaft • Identical appearance & performance as Dynamic Gold, but 20% lighter! AVAILABLE WOOD SHAFTS W/SENSICORE® UDGSW R300 3C1M W2 UDGSW S300 4C1M W2 UDGSW X100 5C1M W2 ® IRON SHAFTS W/SENSICORE - PARALLEL UDGSI R300 3C1M IR2 UDGSI S300 4C1M IR2 UDGSI X100 5C1M IR2 ® IRON SHAFTS W/SENSICORE - TAPER DGSI R300 3C1M IR1 DGSI S300 4C1M IR1 DGSI X100 5C1M IR1 DYNAMIC GOLD SL TT0004I (.370" TIP) $19.79 TT5I (.355" TIP) $19.99 DYNAMIC GOLD™ With SENSICORE® playability trim flex factor code • Built upon the Dynamic Gold heritage by creating a lightweight version that will increase initial launch angles and maximize peak trajectory • Great for low trajectory players and those who prefer low spin golf ball designs butt dia. tip dia. weight length bend point W2 W2 W2 W2 W2 W2 .600" .600" .600" .600" .600" .600" .335" .335" .335" .350" .350" .350" 125 gm. 127 gm. 124 gm. 122 gm. 124 gm. 121 gm. 46" 46" 46" 45" 45" 45" high high high high high high firm firm firm firm firm firm IR2 IR2 IR2 .600" .600" .600" .370" .370" .370" 127 gm. 130 gm. 130 gm. 41" 41" 41" high high high firm firm firm IR1 IR1 IR1 .600" .600" .600" .355" .355" .355" 127 gm. 130 gm. 130 gm. 37-41" 37-41" 37-41" high high high firm firm firm each $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 each $12.89 $12.89 $12.89 each $12.99 $12.99 $12.99 Go To: www.golfworks.com — Open 24 Hours Per Day! DYNAMIC GOLD • The No. 1 shaft in golf • This high-flex, tourweight shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy • Additional Flexes Available for UDGW, UDGI and DGI: R200 S200 X200 R400 S400 X300 181 0109 P. 180-183 True Temper:0507 P. 215-218-True Temper 12/19/08 4:11 PM Page 182 TRUE TEMPER TT LITE™ XL TAPER AVAILABLE TT LITE XL WOOD SHAFTS code playability trim flex factor code UTXLWC butt dia. tip dia. length bend point tip stiffness weight R/S 3/4B2M W11/18 .600" .335" 126 gm. 48" mid medium 110 gm. 128 gm. 113 gm. 118 gm. 40" 43" 36-40" 36-40" mid mid mid mid medium medium medium medium $7.99 each $7.99 $7.99 $7.99 $7.99 L/A R/S R S 1/2B2M IR2/IR4 .580" 3/4B2M IR4/IR13 .600" 3B2M IR1 .620" 4B2M IR1 .620" .370" .370" .355" .355" butt dia. tip dia. weight length bend point tip stiffness each IR2/IR4 .580" IR2/IR5 .600" .370" .370" 110 gm. 120 gm. 40" 41" low low soft soft $7.99 $7.99 IRON SHAFTS U2LI UTXLIC 2XLI 2XLI each • The mid-kick point, longer length design of TT Lite XL is a great choice of any borethrough wood or iron, and clubs can be built substantially longer than “standard length” without requiring a butt extension DYNALITE DYNALITE IRON SHAFTS code flex UMGLI UMGLI L/A R/S playability trim factor code 1/2D3H 3/4D3H • Dynalite’s light weight, low-kick point design has made it a favorite among golfers of all skill levels COMMAND TRUE TEMPER’S BEST PRICED STEEL SHAFT! WOOD SHAFTS code flex playability factor TT202101 R/S R/S trim code butt dia. tip dia. weight length bend point tip stiffness 3/4B2M W2/W16 .600" .335" 127 gm. 47" mid medium 3/4C1M IR2/IR5 .600" .370" 127 gm. 41" mid medium IRON SHAFTS TT201103 COMMAND each $3.99 each $3.99 • Competitively priced steel shaft for use in virtually any club • Durable pro-grade finish • Great standard steel stock offering MALTBY DESIGN DYNAMIC GOLD LITE IRON SHAFTS code TT0015I playability trim flex factor code R/S butt dia. tip dia. weight length bend point tip stiffness 3/4B2H IR25/IR26.610" .370" 115 gm. 43" mid tip dia. weight length bend point tip stiffness each each med/firm $11.99 MALTBY DESIGN DYNAMIC GOLD LITE • Designed with custom clubmakers in mind • Combination flex and shaft specifications allow clubmakers to properly fit a broad range of golfers GS-75 GS-75 IRON SHAFTS code flex playability trim factor code butt dia. TT0020I R300 3B3H IR31 .600" .370" 86 gm. 40" low soft $24.99 TT0020I S200 4B3H IR31 .600" .370" 88 gm. 40" low soft $24.99 182 Call Toll Free: 800.848.8358 • The lightest alloy shaft in the world • Constructed from True Temper's proprietary super-strength S3 alloy, allowing the manufacturing of superlight, golf shafts with unmatched durability, performance and feel • Increases launch angle with no increase in spin 0109 P. 180-183 True Temper:0507 P. 215-218-True Temper 12/19/08 4:12 PM Page 183 TRUE TEMPER TAPER DYNALITE GOLD SL AVAILABLE DYNALITE GOLD SL IRON SHAFTS code TT0010I TT0010I TT0011I TT0011I TT0011I playability trim flex factor code butt dia. tip dia. weight R300 S300 R300 S300 X100 .600" .600" .600" .600" .600" .370" .370" .355" .355" .355" 104 gm. 105 gm. 102 gm. 103 gm. 108 gm. 3B3H 4B3H 3B3H 4B3H 5B3H IR2 IR2 IR1 IR1 IR1 DYNALITE GOLD SL WITH SENSICORE CODES: DYNALITE™ GOLD length bend point tip stiffness each 41" 41" 42"-37" 42"-37" 42"-37" low low low low low soft soft soft soft soft $15.49 $15.49 $15.59 $15.59 $15.59 • Tip responsive design produces high ball flight to optimize trajectory for lower ball hitters • Superlite steel design promotes increased clubhead speed for exceptional distance TT0012I (.370" TIP) $19.99 TT0013I (.355" TIP) $19.99 TAPER AVAILABLE code - PARALLEL playability trim flex factor code butt dia. tip dia. weight USDLI USDLI USDLI R300 S300 X100 IR2 IR2 IR2 .600" .600" .600" .370" .370" .370" 122 gm. 122 gm. 122 gm. 40" 40" 40" low low low soft soft soft $17.29 $17.29 $17.29 IR1 IR1 IR1 .600" .600" .600" .355" .355" .355" 120 gm. 124 gm. 124 gm. 37-42" 37-42" 37-42" low low low soft soft soft $17.49 $17.49 $17.49 IR2 IR2 IR2 .600" .600" .600" .370" .370" .370" 118 gm. 118 gm. 117 gm. 40" 40" 40" low low low soft soft soft $12.79 $12.79 $12.79 IR1 IR1 IR1 .600" .600" .600" .355" .355" .355" 116 gm. 120 gm. 120 gm. 37-42" 37-42" 37-42" low low low soft soft soft $12.89 $12.89 $12.89 bend point tip stiffness each mid mid medium medium $12.99 $12.99 DYNALITE™ GOLD IRON SHAFTS W/SENSICORE® 3B3H 4B3H 5B3H IRON SHAFTS W/SENSICORE® - TAPER SDLI R300 3B3H SDLI S300 4B3H SDLI X100 5B3H IRON SHAFTS - PARALLEL ULGI R300 3B3H ULGI S300 4B3H ULGI X100 5B3H IRON SHAFTS - TAPER LGI R300 3B3H LGI S300 4B3H LGI X100 5B3H bend tip length point stiffness each • Gold Series performance in a lighter weight, soft tip design, taking its place alongside Dynamic Gold as one of the featured shafts on Tour • Dynalite Gold delivers a higher ball flight SCORE™ with SENSICORE® IRON SHAFTS code flex UMSI UMSI R S playability trim butt factor code dia. 3B2M 4B2M IR3 IR3 .600" .600" tip dia. weight length .370" .370" 121 gm. 123 gm. 40" 40" MALTBY SCORE W/SENSICORE® • A stepless steel shaft offering super consistency and graphite feel with the control of steel • Sensicore technology for shock dampening. An outstanding shaft for most players at a great price! DISTANCE MASTER DISTANCE MASTER STEEL IRON SHAFTS code flex DM0055 Ladie’s DM0055 Men’s playability trim butt factor code dia. 1B2H IR6 .570" 3B2H IR6 .590" tip dia. .370" .370" weight 135 gm. 135 gm. parallel length tip sect. 39" 11" 39" 11" bend point mid mid tip stiffness medium medium DISTANCE MASTER STEEL each $3.79 $3.79 • Excellent, cost-efficient iron shaft alternative for clubmakers • Great steel shaft choice for hybrids • Extended tip parallel section for multiple flex options Go To: www.golfworks.com — Open 24 Hours Per Day! 183 0109 P. 184-189 Royal+misc.:0507 P. 219-223-Royal+misc. 12/19/08 3:51 PM Page 184 0109 P. 184-189 Royal+misc.:0507 P. 219-223-Royal+misc. 12/19/08 3:53 PM Page 185 RIFLE ROYAL PRECISION RIFLE® PROJECT X IRON SHAFTS-PARALLEL code flex RPXISET RPXISET RPXISET RPXISET 5.0 5.5 6.0 6.5 playability trim factor code 3B1M 3.5B1M 4B1M 5B1M IR1 IR1 IR1 IR1 TAPER AVAILABLE butt dia. tip dia. weight .600" .600" .600" .600" .370" .370" .370" .370" 115 gm. 115 gm. 125 gm. 125 gm. length bend point tip stiffness sets set 3-PW set 3-PW set 3-PW set 3-PW mid/high mid/high mid/high mid/high med/firm med/firm med/firm med/firm $254.99 $254.99 $254.99 $254.99 .355" TIP AVAILABLE - CODE: TRPXISET code flex RP14SET RP14SET RP14SET RP14SET 5.0 5.5 6.0 6.5 playability trim factor code 3B2M 3.5B2M 4B2M 5B1M IR1 IR1 IR1 IR1 • Features a long taper rate that actually achieves a more dynamic transfer of shaft energy to the ball. • Produces a slightly higher launch angle and penetrating flight pattern INDIVIDUAL SHAFTS: $31.99 RP0008I (.370" TIP) RP0009I (.355" TIP) TAPER PROJECT X FLIGHTED® IRON SHAFTS-PARALLEL RIFLE® PROJECT X AVAILABLE butt dia. tip dia. weight length bend point tip stiffness sets .600" .600" .600" .600" .370" .370" .370" .370" 115 gm. 120 gm. 125 gm. 130 gm. set 3-PW set 3-PW set 3-PW set 3-PW mid/high mid/high mid/high mid/high med/firm med/firm med/firm med/firm $269.99 $269.99 $269.99 $269.99 .355" TIP AVAILABLE - CODE: RP14SET RIFLE® PROJECT X FLIGHTED® • Features an exaggerated change in kickpoint within the set to manipulate ball flight. • Long irons provide a lower kickpoint for higher ball flight INDIVIDUAL SHAFTS: $33.99 RP0015 (.370" TIP) RP0015 (.355" TIP) TAPER RIFLE® AVAILABLE RIFLE® IRON SHAFTS-PARALLEL playability trim factor code butt dia. tip dia. weight length bend point tip stiffness code flex UFMRISET 4.0 1B2M IR1 .600" .370" 115 gm. set 3-PW mid/low med/soft UFMRISET 4.5 2B2M IR1 .600" .370" 118 gm. set 3-PW mid/low med/soft UFMRISET 5.0 3B2M IR1 .600" .370" 121 gm. set 3-PW mid medium UFMRISET 5.5 3.5B2M IR1 .600" .370" 124 gm. set 3-PW mid med/firm UFMRISET 6.0 4B1M IR1 .600" .370" 127 gm. set 3-PW mid/high med/firm UFMRISET 6.5 5B1M IR1 .600" .370" 130 gm. set 3-PW mid/high firm UFMRISET 7.0 5.5B1M IR1 .600" .370" 132 gm. set 3-PW mid/high firm $154.99 $154.99 $154.99 $154.99 $154.99 $154.99 $154.99 1B2M 2B2M 3B2M 3.5B2M 4B1M 5B1M 5.5B1M IR1 IR1 IR1 IR1 IR1 IR1 IR1 .600" .600" .600" .600" .600" .600" .600" .355" .355" .355" .355" .355" .355" .355" 115 gm. 118 gm. 121 gm. 124 gm. 127 gm. 130 gm. 132 gm. set 3-PW set 3-PW set 3-PW set 3-PW set 3-PW set 3-PW set 3-PW mid/low mid/low mid mid mid/high mid/high mid/high med/soft med/soft medium med/firm med/firm firm firm $154.99 $154.99 $154.99 $154.99 $154.99 $154.99 $154.99 IRON SHAFTS-TAPER FMRISET FMRISET FMRISET FMRISET FMRISET FMRISET FMRISET 4.0 4.5 5.0 5.5 6.0 6.5 7.0 • Widely used by top players, Rifle® features a patented stepless steel design and is Frequency Matched. This consistent PGA Tour winner is an excellent choice for all players. • Individual lengths are available sets sets ORDER YOUR SHAFTS TIP PREPPED FOR ONLY $2.95! code:RSPREP INDIVIDUAL SHAFTS: $19.99 URI (.370" TIP) FMRI (.355" TIP) RIFLE® SPINNER WEDGE WEDGE SHAFTS code UFMRSW UFMRSW UFMRSW UFMRSW UFMRSW FMRSW FMRSW FMRSW FMRSW FMRSW playability flex factor 4.5 5.0 5.5 6.0 6.5 4.5 5.0 5.5 6.0 6.5 3B2M 3.5B2M 4B2M 4.5B2M 5B2M 3B2M 3.5B2M 4B2M 4.5B2M 5B2M trim butt tip code dia. dia. IR1 IR1 IR1 IR1 IR1 IR1 IR1 IR1 IR1 IR1 .600" .600" .600" .600" .600" .600" .600" .600" .600" .600" .370" .370" .370" .370" .370" .355" .355" .355" .355" .355" TAPER AVAILABLE weight length bend point 118 gm. 122 gm. 124 gm. 126 gm. 130 gm. 118 gm. 122 gm. 124 gm. 126 gm. 130 gm. 37" 37" 37" 37" 37" 37" 37" 37" 37" 37" mid/low mid/low mid/low mid/low mid/low mid/low mid/low mid/low mid/low mid/low tip stiffness each medium medium medium medium medium medium medium medium medium medium $21.99 $21.99 $21.99 $21.99 $21.99 $21.99 $21.99 $21.99 $21.99 $21.99 Go To: www.golfworks.com — Open 24 Hours Per Day! RIFLE® SPINNER WEDGE • Developed for PGA Tour players who like a softer feel in their scoring irons which are used primarily for lessthan-full shots 185 0109 P. 184-189 Royal+misc.:0507 P. 219-223-Royal+misc. 12/31/08 3:49 PM Page 186 RIFLE TOUR FLIGHTED RIFLE® TAPER AVAILABLE IRON SHAFTS-PARALLEL code flex UTFRISET UTFRISET UTFRISET UTFRISET UTFRISET UTFRISET 4.5 5.0 5.5 6.0 6.5 7.0 playability trim butt tip factor code dia. dia. weight bend point length tip stiffness sets TOUR FLIGHTED RIFLE® 2B3M 3B2M 3.5B2M 4B2M 5B1M 5.5B1M IR1 IR1 IR1 IR1 IR1 IR1 .600" .600" .600" .600" .600" .600" .370" .370" .370" .370" .370" .370" 117 gm. 120 gm. 123 gm. 126 gm. 130 gm. 132 gm. set 3-PW low set 3-PW mid/low set 3-PW mid set 3-PW mid/high set 3-PW mid/high set 3-PW mid/high soft med/soft medium med/firm firm firm $168.99 $168.99 $168.99 $168.99 $168.99 $168.99 SINGLE PRICE: $21.99 ea. (UTFRI) 2B3M 3B2M 3.5B2M 4B2M 5B1M 5.5B1M IR1 IR1 IR1 IR1 IR1 IR1 .600" .600" .600" .600" .600" .600" .355" .355" .355" .355" .355" .355" 117 gm. 120 gm. 123 gm. 126 gm. 130 gm. 132 gm. set 3-PW low set 3-PW mid/low set 3-PW mid set 3-PW mid/high set 3-PW mid/high set 3-PW mid/high soft med/soft medium med/firm firm firm $168.99 $168.99 $168.99 $168.99 $168.99 $168.99 SINGLE PRICE: $21.99 ea. (TFRI) IRON SHAFTS-TAPER TFRISET TFRISET TFRISET TFRISET TFRISET TFRISET 4.5 5.0 5.5 6.0 6.5 7.0 • A revolutionary concept developed through exclusive Flex Distribution Technology™. Provides an exaggerated change in kick point within the club set to manipulate ball flight KBS KBS BLACK NICKEL WEDGE IRON SHAFTS code flex playability factor FS0021 FS0021 FS0021 R S X 3B2H 4B1H 5C1H trim butt tip code dia. dia. IR1 IR1 IR1 weight .600" .355" 110 gm. .600" .355" 120 gm. .600" .355" 130 gm. length 37" 37" 37" bend point tip stiffness mid mid mid/high med/stiff high stiff each $39.99 $39.99 $39.99 KBS TOUR-TAPER TIP IRON SHAFTS code playability flex factor FS0018 FS0018 FS0018 4.5 5.5 6.5 3B2H 4B1H 5C1H trim butt tip code dia. dia. IR1 IR1 IR1 weight length bend point tip stiffness .600" .355" 110 gm. 37.5"-41.5" mid medium .600" .355" 120 gm. 37.5"-41.5" mid/high med/stiff .600" .355" 130 gm. 37.5"-41.5" high stiff each $25.00 $25.00 $25.00 KBS BLACK NICKEL WEDGE • Incorporates the unique KBS design that proportionately reduces shaft mass and step radius along the shaft's entire center line KBS TOUR TAPER TIP • Designed with moment of inertia analysis to increase stability from grip to clubhead to enhance the results of wellexecuted swings KBS HYBRID HYBRID SHAFTS code FS0020 FS0020 FS0020 playability flex factor trim butt tip code dia. dia. 4.5 5.5 6.5 IR32 .600" .370" 100 gm. IR32 .600" .370" 105 gm. IR32 .600" .370" 110 gm. 3B2H 4B1H 5C1H weight length 43" 43" 43" bend point tip stiffness mid medium mid/high med/stiff high stiff KBS HYBRID each $50.00 $50.00 $50.00 • Features a gradual stepless taper starting at the anchor location (between the hands) and continuing to the tip just above the hosel KBS TOUR-PARALLEL TIP IRON SHAFTS code flex playability factor FS0019 FS0019 FS0019 4.0 5.0 6.0 2B3H 3B2H 4C2H 186 trim butt tip code dia. dia. IR9 IR9 IR9 weight .600" .370" 120 gm. .600" .370" 130 gm. .600" .370" 133 gm. length 43.5" 43.5" 43.5" bend point tip stiffness variable variable variable variable variable variable each $25.00 $25.00 $25.00 Call Toll Free: 800.848.8358 KBS TOUR PARALLEL TIP • Perfect for club builders and players who want to customize the shaft’s effect on ball spin and ball flight 0109 P. 184-189 Royal+misc.:0507 P. 219-223-Royal+misc. 12/19/08 4:28 PM Page 187 FST FST 90 FST 90 • 25% lighter than conventional steel shafts. Lighter weight allows for a club with a lower center of gravity, while produces higher shot pattern IRON SHAFTS code flex playability factor trim code FS0011 A/R 2D3H/3D3H IR20/IR3 butt dia. tip dia. weight length parallel tip sect. bend point 41" 10" low .600" .370" 100 gm. tip stiffness each soft $9.99 FST 115 FST 115 IRON SHAFTS code flex playability factor trim code butt dia. tip dia. FS0012 FS0012 A/R S/X 2D3H/3D3H IR33/IR34 4B2H/5B2H IR33/IR35 .600" .370" 115 gm. .600" .370" 115 gm. butt dia. weight length parallel tip sect. bend point 43" 43" 13" 11" low mid length parallel tip sect. bend point 43" 11" high tip stiffness each soft medium $6.99 $6.99 • Lightweight shaft is designed to increase ball flight without sacrificing consistency and control • Lighter weight allows the clubmaker to use a lower center of gravity head or more head mass without increasing overall club weight FST 125 IRON SHAFTS code flex playability factor trim code FS0014 S/X 4C1H/5C1H IR33/IR35 tip dia. weight .600" .370" 125 gm. tip stiffness each soft $6.99 FST 125 • Conventional weight iron shaft in a traditional step pattern • Excellent value for the better player FST PRO 115 STEPLESS FST PRO 115 STEPLESS IRON SHAFTS code flex playability factor trim code FS0013 FS0013 A/R S/X 2D3H/3B3H IR33/IR34 4B2H/5B3H IR33/IR35 butt dia. tip dia. weight length parallel tip sect. bend point 43" 43" 13" 11" low mid length parallel tip sect. bend point 43" 11" high .600" .370" 115 gm. .600" .370" 115 gm. tip stiffness each soft medium • A ground-breaking light weight stepless steel shaft from FST • Stepless profile delivers better feedback to the player at impact $7.99 $7.99 FST PRO 125 STEPLESS IRON SHAFTS code flex playability factor trim code FS0015 S/X 4C1H/5C1H IR33/IR35 FST HI-REV WEDGE .370"-WEDGE SHAFTS playability code flex factor FS0016 R 3B3H FS0016 S 4B2H FS0016 X 5B2H .355"-WEDGE SHAFTS FS0017 FS0017 FS0017 R S X 3B3H 4B2H 5B2H butt dia. tip dia. weight .600" .370" 125 gm. tip stiffness each stiff $7.99 TAPER AVAILABLE trim code IR1 IR1 IR1 butt tip dia. dia. .600" .370" .600" .370" .600" .370" weight length 110 gm. 37" 120 gm. 37" 130 gm. 37" IR1 IR1 IR1 .600" .355" .600" .355" .600" .355" 110 gm. 120 gm. 130 gm. 37" 37" 37" FST 125 STEPLESS • Tour-weighted shaft that generally appeals to skilled golfers • Tip-stiff design produces the lowest ball flight of any premium FST shaft • Stepless profile transfers vibration more evenly from the club head to the hands FST HI-REV WEDGE parallel tip sect. 5" 5" 5" bend point low low low tip stiffness soft medium stiff each $12.99 $12.99 $12.99 - low low low soft medium stiff $12.99 $12.99 $12.99 bend point tip stiffness each low low soft soft $3.99 $3.99 • Design specifically for heavier and more lofted heads used in wedges • Available in .355" tapered or .370" parallel tip models JUNIOR IRON SHAFTS code playability trim flex factor code butt dia. tip dia. FS0010W Junior 1D3H see right .500" .335" FS0009I Junior 1D3H see right .500" .370" weight length 108 gm. 112 gm. 42" 37" FST JUNIOR TRIMMING INSTRUCTIONS: • Woods: 1=0", 2=1/2", 3-7=1" • Irons: 1=0",2 =1/2", 3=1", 4=1 1/2", 5=2", 6-W=0" • After tip trim, trim to final length from butt Go To: www.golfworks.com — Open 24 Hours Per Day! 187 0109 P. 184-189 Royal+misc.:0507 P. 219-223-Royal+misc. 12/19/08 3:33 PM Page 188 TRUE TEMPER PUTTER TRUE TEMPER® STRAIGHT TAPER PUTTER SHAFTS butt dia. .580" .600" .580" .600" code YST TT0001P TT0004P TT0003P tip dia. .355" .370" .382"ID .370" weight 120 gm. 127 gm. 128 gm. 122 gm. length 38" 38" 38" 38" each $7.99 $6.99 $10.99 $3.99 description Sleek, stepless putter shaft for any model that accepts a straight .355" shaft tip Stepless steel putter shaft Fits OEM putters requiring a flare-tipped shaft, including Bullseye, Wilson and Ping Stepped steel putter shaft Flare Tip DOUBLE BEND by TRUE TEMPER® PUTTER SHAFTS butt dia. .600" .600" .600" .600" .600" .600" code TT1000P TT1001P TT1002P TT1004P TT1005P TT1003P tip dia. .370" .370" .370" .370" .370" .370" weight length offset 122 gm. 38" 0" 122 gm. 38" 1/4" 122 gm. 38" 3/8" 122 gm. 38" 1/2" 122 gm. 38" variable 122 gm. 38" 3/8" each $9.99 $9.99 $9.99 $9.99 $9.99 $9.99 description 0" Right & Left-hand offset – 90° bore angle required to achieve 72° lie 1/4" Right-hand offset – 90° bore angle required to achieve a 72° lie angle 3/8" Right-hand offset – 90° bore angle required to achieve a 72° lie angle 1/2" Right-hand offset – 90° bore angle required to achieve a 72° lie angle Variable Right & Left-hand offset 3/8" Left-hand offset – 90° bore angle required to achieve a 72° lie angle NEED A CUSTOM DOUBLE BEND PUTTER SHAFT? CALL THE GOLFWORKS FOR OPTIONS 1-800-848-8358 BELLY & LONG by TRUE TEMPER® PUTTER SHAFTS code TT0046 SKP TT0047 TT0048 TT0049 butt dia. .625" .625" .625" .625" .625" tip dia. .370" .370" .370" .370" .370" weight length 163 gm. 50" 163 gm. 53" 163 gm. 53" 163 gm. 53" 163 gm. 53" each $10.99 $10.99 $10.99 $10.99 $10.99 description True Temper shaft specifically designed for overlength putters True Temper shaft specifically designed for overlength putters True Temper stepped Ski Pole shaft specifically designed for overlength putters True Temper Single Bend Ski Pole shaft specifically designed for overlength putters True Temper Double Bend Ski Pole shaft specifically designed for overlength putters ODYSSEY REPLACEMENT by TRUE TEMPER® PUTTER SHAFTS code TT204102 TT204103 188 butt dia. .580" .580" tip dia. .370" .370" weight length offset 110 gm. 37" .25" 171 gm. 50" .25" each $8.99 $9.99 description Odyssey Replacement Odyssey Replacement Call Toll Free: 800.848.8358 0109 P. 184-189 Royal+misc.:0507 P. 219-223-Royal+misc. 12/19/08 3:34 PM Page 189 UST PUTTER FREQUENCY FILTEREDTM PUTTER SHAFTS-STEPLESS butt dia. .600" .600" .600" code US0010P US0011P US0012P tip dia. .370" .355" .370" FREQUENCY FILTERED weight 106 gm. 106 gm. 106 gm. length 37.75" 37.75" 37.75" each $39.99 $39.99 $39.99 description Straight .370" tip putter shaft Straight .355" tip putter shaft Double Bend .370" putter shaft • Frequency FilteredTM technology promotes feel on every putt • Unique filter provides feedback like no putter shaft ever before FST PUTTER FST PUTTER SHAFTS-STEPLESS butt dia. .570" .570" code FS0006P FS0007P tip dia. .370" .370" weight length 125 gm 35" 112 gm 35" each $3.99 $3.99 description Straight stepless putter shaft. Straight fluted putter shaft. DISTANCE MASTER PUTTER DISTANCE MASTER PUTTER SHAFTS code DM0056 butt dia. .580" tip dia. .370" weight length 120 gm 35" each $2.99 description Stepped putter shaft PUTTING AIDS PRO-LINE BALL MARKER The Pro-Line Golf Tool ensures a straight line down the exact equator of any ball. It will save the average golfer 3-6 strokes the first time he uses it! PBMT $6.99 FLOOR MIRROR SET-UP GUIDE Ensures golfer stands in proper playing position for accurate stroke assessment. Available for right- or left-handed players. FMAG FMAG RH LH $39.99 $39.99 Go To: www.golfworks.com — Open 24 Hours Per Day! 189
