International Paints

International Paints
International
Paints
Revised Edition
2-6
Antifoulings
7
8-9
Primers & Osmosis
Topcoats, Undercoats & Matting Additive
9
Bilge & Locker Paint,
Non Slip Coatings & Additives, Epoxy Filler
10
Varnishes, Wood Sealer
11
Boat Care & Thinners
Six Depots Nationwide
Aquafax Limited, 14 Dencora Way, Sundon Business Park, Luton, Beds LU3 3HP
Aquafax Ltd. (Hamble), 1-2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO31 4RF
Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU
Aquafax Ltd. (Middlewich), Unit 11, Valley Court, Sanderson Way, Middlewich, Cheshire CW10 0GF
Aquafax Ltd. (Wroxham), Unit 31, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR12 8DZ
Marinac Scotland (Aquafax Glasgow), 103-105 Barrie Road, Hillington Park, Glasgow G52 4PX
INTERNATIONAL PAINTS 2012
Tel:(01582) 568700
Tel:(023) 80457206
Tel:(01752) 669944
Tel:(01606) 841111
Tel:(01603) 781881
Tel: (0141) 8827511
Fax:(01582) 568720
Fax:(023) 80457208
Fax:(01752) 667764
Fax:(01606) 841188
Fax:(01603) 781981
Fax: (0141) 8835111
1
International
Antifoulings
ANTIFOULINGS
Reformulated Antifoulings from International Paint - What’s New?
International Paint are constantly reviewing upcoming legislation and reformulating their products to ensure they exceed compliance. One such
piece of legislation is the Biocidal Products Directive (98/8/EC, BPD). The BPD will standardise the regulation of antifoulings across the EU.
All current (and new) antifoulings, and the biocides they contain, will be assessed on their risk to both humans and the environment.
International Paint has taken a very proactive role and has worked hard to ensure its customers
will have products that are supported under the BPD. To ensure a fully compliant BPD product
range, some of the antifoulings within the UK range have been reformulated. Significant
investment in Research and Development has been made to ensure the new products are just
as good (or better) than the products they are replacing.
International Antifoulings can be applied direct over most types of antifoulings, provided they are in sound condition.
Unknown antifoulings should be removed using Interstrip AF, or sealed with Primocon. See page 6 for a compatibility chart.
MICRON® OPTIMA
Polishing Antifouling
• For the absolute cleanest hulls
• Minimum build-up – reduced preparation time
• Activated Biolux® technology for sustained
antifouling protection
Practical Coverage (m²/Lt): 8.3
No. of coats: 2 - 3
Substrates: GRP, Lead, Steel, Wood,
Application: Brush, Roller
Thinner: Water (for clean up)
Rated “Outstanding” on high fouling areas.
Colour Pre-Immersion
• Water based – low odour, easy clean up.
For the absolute cleanest hulls
Colour
2 Litre
Dover White
Red
Light Blue
Black
5-60000
5-60001
5-60002
5-60003
Colour Post-Immersion
• NOT suitable for high speed craft or
on aluminium
Dover White
MICRON® EXTRA 2
NEW
Red
Light Blue
Black
Practical Coverage (m²/Lt): 9.0
No. of coats: 2-3 (1 Season), 3-4 (2 Seasons)
Substrates: GRP, Wood, Steel/Iron & Lead
Application: Brush, Roller
Thinner: No.3 for cleaning equipt, thinning of
product not recommended
Rated “Outstanding” on high fouling areas.
Premium polishing antifouling providing
2 seasons protection in difficult fouling conditions.
• High performance, premium multi-season copolymer antifouling, providing
up to 2 years protection even in the harshest fouling conditions.
• Polishing action ensures that a fresh, active layer of antifouling is
always exposed to the water. This action results in a clean, smooth
hull, minimising friction and drag. The movement of the hull through
the water gradually wears away the coating, preventing leached layer
build-up. This reduces surface preparation prior to re-coating, helping
to save time and costs.
Colour
Dover White
Blue
Green
Navy
Red
Dark Grey
Black
• Multi-season lifetime (3-4 coats) - the convenience to haul out, wash
and re-launch without re-painting every season.
• Biolux® technology - controlled optimised biocide release for sustained
antifouling protection. Contains boosting biocides for enhanced slime
and weed control.
750ml
5-60070
5-60073
–
5-60079
5-60082
–
5-60088
2.5 Litre
5-60071
5-60074
5-60077
5-60080
5-60083
5-60086
5-60089
5 Litre
5-60072
5-60075
–
5-60081
5-60084
–
5-60090
• Wide overcoating window, can be applied up to 12 months before
launch - apply in Autumn launch in Spring.
• Suitable for high speed craft up to 25 knots
• NOT suitable on aluminium/alloy substrates or zinc sprayed surfaces.
The printing processes used in producing the colour charts do
not allow exact colour reproduction and we recommend that you
should check for accuracy before applying. International Paints
colour charts are available.
2
INTERNATIONAL PAINTS 2012
Dover White
Blue
Green
Navy
Pre-Immersion
Post-Immersion
Red
Dark Grey
Black
Visit www.yachtpaint.com
for downloadable datasheets.
International
Antifoulings
ANTIFOULINGS
CRUISER® UNO EU
All-purpose polishing antifouling offering one
season’s protection in just one coat.
NEW
• One coat per season (after initial 2 coat scheme), offers exceptional
value for money.
• One season’s protection in all but harshest fouling conditions.
• Polishing action ensures that a fresh, active layer of antifouling is
always exposed to the water. This action results in a clean, smooth hull,
minimising friction and drag. The movement of the hull through the water gradually wears away
the coating, preventing leached layer build-up. This reduces surface preparation prior to
re-coating, helping to save time and costs.
• For powerboats (up to 25 knots) and sail boats, and
suitable for all cruising leisure craft.
• Painting and immersion within 24 hours
Practical Coverage (m²/Lt): 9.0
No. of coats: 1 per season after initial 2 coat application
Substrates: GRP, Wood, Steel/Iron & Lead
Application: Brush, Roller
Thinner: No.3 for cleaning equipt, thinning of product
not recommended
Rated “Excellent” on high fouling areas.
Colour Pre-Immersion
Colour Post-Immersion
Colour
Dover White
Blue
Navy
Red
Black
750ml
5-60280
5-60282
5-60284
5-60286
5-60288
3 Litre
5-60281
5-60283
5-60285
5-60287
5-60289
• Low VOC (~350g/L) reduces overall environmental impact
to the previous International cruising antifouling
• NOT suitable for use over aluminium/alloy substrates or
zinc sprayed surfaces.
BOATGUARD EU
Dover White
Blue
NEW
Red
Black
Practical Coverage (m²/Lt): 9.0
No. of coats: 2 - 3 per season
Substrates: GRP, Wood, Steel/Iron & Lead
Application: Brush, Roller
Thinner: No.3 for cleaning equipt, thinning
of product not recommended
Rated “Good” on high fouling areas.
General purpose polishing antifouling for sail and power
boats formulated for all waters, especially fresh and brackish.
• Good general performance antifouling at low coat offering one season
protection in moderate to low fouling areas.
• Specially formulated for use in all waters.
• Suitable for inland waterways, providing effective protection for boats in
fresh water.
• Polishing action ensures that a fresh, active layer of antifouling is always
exposed to the water. This action results in a clean, smooth hull,
minimising friction and drag. The movement of the hull through the water
gradually wears away the coating, preventing leached layer build-up.
This reduces surface preparation prior to re-coating, helping to save time
and costs.
Navy
Colour Pre-Immersion
Colour Post-Immersion
Colour
2.5 Litre
Black
Blue
Navy
Red
Dover White
5-60200
5-60201
5-60202
5-60203
5-60204
• Proven to have reduced environmental impact compared
to previous International general purpose antifoulings.
• NOT suitable high speed craft or for use over
aluminium/alloy substrates or zinc sprayed surfaces.
CRUISER® BRIGHT WHITE
Dover White
Blue
Navy
Black
Practical Coverage (m²/Lt): 9.2
No. of coats: 3 per season
Substrates: GRP, Wood, Steel/Iron, Lead
Aluminium, Bronze & Stainless Steel
Application: Brush, Roller
Thinner: No.3 for cleaning equipt, thinning of
product not recommended
Rated “Good” on high fouling areas.
NEW
All-purpose bright white polishing antifouling offering
one season’s protection in moderate to low fouling conditions.
• Outstanding bright white finish.
• Good general purpose antifouling offering one season’s protection in
moderate to low fouling areas.
• Suitable for all substrates including aluminium.
• Speciality formulated for use in all waters.
Colour
Bright White
• Polishing action ensures that a fresh, active layer of antifouling is always exposed
to the water, resulting in a clean, smooth hull, minimising friction and drag.
• Formulated for power boats (up to 30 knotts) and sail boats, and suitable for all
leisure cruising craft.
Red
Bright White
2.5 Litre
5-60006
Colour Pre-Immersion
Colour Post-Immersion
The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you
should check for accuracy before applying. International Paints colour charts are available.
Visit www.yachtpaint.com
for downloadable datasheets.
INTERNATIONAL PAINTS 2012
3
International
Antifoulings
ANTIFOULINGS
TRILUX 33
Slow Polishing Antifouling
• Slow polishing, avoids seasonal paint build up
• For all substrates including aluminium;
recommended for propellers and boottops
• Bright colours, including bright white
• Effective fouling protection for up to 18 months
• Suitable for high speed craft
White
Navy
Practical Coverage (m²/Lt): 8.3
No. of coats: 2 - 3 (1 Season), 3-4 (18 months)
Substrates: Aluminium, S/Steel, Bronze, GRP,
Lead, Steel, Wood,
Application: Brush, Roller
Thinner: No.3 (for clean up)
Rated “Excellent” on high fouling areas.
Black
Red
Colour
White
Navy
Black
Red
Green
Blue
Grey
Green
Pre-Immersion
Post-Immersion
Blue
375ml
5-60100
–
5-60110
5-60115
–
5-60125
5-60130
750ml
5-60101
5-60106
5-60111
5-60116
5-60121
5-60126
5-60131
2.5 Litre
5-60102
5-60107
5-60112
5-60117
5-60122
5-60127
5-60132
Grey
INTERSPEED® ULTRA 2
Practical Coverage (m²/Lt): 9.0
No. of coats: 2 - 3 per season
Substrates: GRP, Wood, Steel/Iron & Lead
Application: Brush, Roller
Thinner: No.3 for cleaning equipt, thinning of
product not recommended
Rated “Outstanding” on high fouling areas.
NEW
A premium hard antifouling, ideal
for fast powerboats in the highest fouling conditions.
• Ultra strong formula gives maximum protection in high fouling areas
• Hard, durable finished can be burnished to produce a super smooth
surface for reduced drag and increased speed making it perfect for
fast, active craft.
Colour
Dover White
Green
Blue
Red
Navy
Dark Grey
Black
• Biolux® technology gives controlled optimised biocide release for
sustained antifouling protection. Contains boosting biocides for
enhanced slime and weed control.
• Full range of colours (final colour develops on immersion) see right.
• NOT suitable for use over aluminium/alloy substrates or zinc
sprayed surfaces.
750ml
5-60136
–
5-60142
5-60145
5-60148
–
5-60154
2.5 Litre
5-60137
5-60140
5-60143
5-60146
5-60149
5-60152
5-60155
5 Litre
5-60138
–
–
–
5-60150
5-60156
Pre-Immersion
Post-Immersion
Dover White
Green
VC® OFFSHORE EU
Hard Antifouling
Blue
NEW
• Suitable for salt and freshwater
• Hard, smooth finish can be burnished
to a smooth profile
• For racing, sailing and power boats
• Suitable for high speed craft
• NOT suitable for use over
aluminium/alloy substrates or zinc
sprayed surfaces.
Red
Navy
Dark Grey
Practical Coverage (m²/Lt): 10.5
No. of coats: 2 - 3
Substrates: GRP, Lead, Steel
Application: Roller
Thinner: VC® General Thinner (for clean up)
Rated “Excellent” on high fouling areas.
Colour
Dover White
Blue
Red
Black
750ml
5-60221
5-60223
5-60225
5-60227
2 Litre
5-60222
5-60224
5-60226
5-60228
Black
Dover White
Blue
Red
Black
Colour Pre-Immersion
Colour Post-Immersion
The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you
should check for accuracy before applying. International Paints colour charts are available.
4
INTERNATIONAL PAINTS 2012
Visit www.yachtpaint.com
for downloadable datasheets.
International
Antifoulings
ANTIFOULINGS
VC®17M EXTRA - GRAPHITE
TRILUX PROP-O-DREV
Thin Film Antifouling
• For racing sailboats and powerboats
• With fluoro microadditive for a low
friction surface
• Hard, smooth surface
• Quick drying for fast re-launch
• Suitable for high speed craft
• Aerosol application for difficult to reach areas
• For propellers, outboards & sterngear
• For aluminium, stainless steel & alloy
• Biolux® technology for
sustained antifouling protection
500ml
Prop-O-Drev Grey
Prop-O-Drev Black
5-60255
5-60256
Prop-O-Drev Primer (300ml) Grey
Part No. 5-60258
No. of coats: 3 minimum
Coverage: 1 can per medium
sized outdrive
Thinner: VC® General Thinner
(for clean up)
Rated “Excellent” on high
fouling areas.
Practical Coverage (m²/Lt): 11.7
No. of coats: 2 - 3
Substrates: GRP, Lead, Steel
Application: Roller
Thinner: VC® General Thinner (for clean up)
Rated “Excellent” on high fouling areas.
Description
Colour Pre-Immersion
Colour Post-Immersion
Colour Pre-Immersion
Colour Post-Immersion
Graphite
Colour
Graphite
750ml
5-60219
2 Litre
5-60220
Grey
Black
UNI-PRO EU
Practical Coverage (m²/Lt): 9.0
No. of coats: 2 - 3
Substrates: GRP, Wood,
Steel/Iron, Lead
Application: Brush, Roller,
Thinner: No. 3 (for clean up)
All-purpose polishing antifouling designed for sailing boats and power boats
for the professional market for one season’s antifouling protection.
• One season’s protection - a proven cost effective solution for all but the harshest
fouling conditions
• Polishing action ensures that a fresh, active layer of antifouling is always exposed to
the water resulting in a clean, smooth hull, minimising friction and drag. The
movement of the hull through the water gradually wears away the coating preventing
leached layer build up. This reduces surface preparation prior to recoating, saving
labour time and reducing costs
• Compatible with the vast majority of antifouling schemes.
Minimal surface preparation required when applying to aged antifouling.
• Low VOC (~350g/L) - Enables yards to reduce overall
emission levels, to meet SED requirements and
reducing overall environmental impact
Colour
Dover White
Blue
Navy
Red
Black
NEW
Colour Pre-Immersion
5 Litre
5-60290
5-60292
5-60294
5-60296
5-60298
20 Litre
5-60291
5-60293
5-60295
5-60297
5-60299
Colour Post-Immersion
• NOT suitable for use over aluminium/alloy
substrates or zinc sprayed surfaces.
• BPD compliant - future proof
Dover White
• IMO systems convention – Lloyds Register
Navy
Red
Black
ANTIFOUL REMOVER - INTERSTRIP AF
LAGO RACING II
• A paint stripper especially formulated
for removal of antifoulings
• Interstrip AF is not aggressive and
will not damage gelcoats
• Bright colours - Excellent aesthetics
• Waterbased - Low odour / low VOC (149g/L)
• Hard, smooth finish - Easy to clean
• Can be applied direct to GRP or any suitably
primed surface – reduced cost, reduced
working time
Theoretical Coverage (m²/Lt): 9.4
No. of coats: 2 - 3 as bottomcoat (1 as primer)
Substrates: GRP, Lead, Steel, Wood, Aluminium
Application: Brush, Roller
Blue
Substrates: GRP, Steel, Wood, Aluminium
Application: Brush
Colour
2.5 Litre
White
Blue
5-60230
5-60232
Colour 1 Litre
–
5-60270
2.5 Litre
5-60271
The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you
should check for accuracy before applying. International Paints colour charts are available.
Visit www.yachtpaint.com
for downloadable datasheets.
INTERNATIONAL PAINTS 2012
5
International
Antifoulings
ANTIFOULING COMPATIBILITY
Is My New Antifouling Compatible?
Once you’ve identified the International antifouling that’s most suitable, if you have an existing coating on your hull you will need to establish the
compatibility of the two products. Use this simple table to check compatibility between International® antifoulings and also with competitor products.
Trilux Prop-O-Drev
VC®17m Extra
VC® Offshore EU
Trilux 33
Interspeed Ultra
Interspeed Ultra 2
Boatguard EU
Cruiser
Bright White
Cruiser® Uno
Cruiser® Uno EU
Micron® Extra
Micron® Extra 2
Micron® Optima
New Antifouling
Micron® Optima
Micron® Extra
Micron® Extra 2
Cruiser® Uno
Cruiser® Uno EU
Boatguard EU
Bottomcoat
Navigator
Existing Antifouling (in good condition)
Trilux
Interspeed Ultra 2
Cruiser Bright White
Trilux 33
VC® Offshore
VC® Offshore EU
VC®17m Extra
Unknown Product
Previous antifouling
in poor condition
Awlgrip® Awlstar
Gold Label
Hempel Tiger Extra
Hempel Hard Racing
Hempel Cruising Performer
Hempel Classic
Seajet Shogun
Seajet Emperor
Seajet Coastal
Flag Cruising
Flag Performance
Jotun Mare Nostrum
XM CX2000
Key:
Apply after a light wet sand. Wash with fresh water and allow to dry
Remove the antifouling using Interstrip AF.
Apply a barrier coat of Primocon® before applying antifouling.
6
INTERNATIONAL PAINTS 2012
For brushes, rollers and
sanding equipment see our
main Section 5 catalogue.
Visit www.yachtpaint.com
for downloadable datasheets.
International Primers
PRIMERS & OSMOSIS
VC® TAR2 (2 Pack)
PRIMOCON® (Grey Single Pack Primer)
• Conventional one-part primer for use below water
• Quick drying, with anticorrosive properties
• Can be used under all major antifoulings* or as
a conversion coat over incompatible or
unknown antifoulings
Area: Below the waterline.
(*Do NOT use with VC®17m systems)
750ml 2.5 Litre 5 Litre
Finish: Matt No. of coats: 1 - 5
5-60850 5-60851 5-60852
Practical Coverage (m²/Lt): 7.4
Substrates: GRP, Wood, Steel, Aluminium, Lead, & Zinc
Application: Brush, Roller
Thinner: No. 3
YACHT PRIMER (Grey Single Pack Primer)
750ml 2.5 Litre
5-60856 5-60857
Area: Above & below the waterline.
(Do NOT use over one-part products or antifoulings)
Finish: Matt
Practical Coverage (m²/Lt): 8.1
No. of coats: 2 - 5
Colour
Substrates: Wood, Steel, Aluminium
White
Application: Brush, Roller,
Grey
Thinners: No.7
2.5 Litre
5-60881
5-60883
• Specifically developed for the economical
protection of steel
• Tough, non-cracking coating offers
protection against rust and is ideal for
Narrowboat Blacking
• Chemically resistant to mild acids & alkalis
Substrates: Steel
Application: Airless Spray,
Brush, Roller
Colour 750ml
Green 5-60860
Grey
5-60862
2.5 Litre
5-60861
5-60863
GELSHIELD® PLUS
• A high build, solventless epoxy primer
• Available in two colours to aid self-on-self
application
• Contains no harmful solvents to migrate
into the hull and cause reblistering
DO NOT THIN UNDER ANY CIRCUMSTANCES
750ml
5-60880
5-60882
INTERTUF 16 (Narrowboat Hull Blacking)
• Quick drying, easy to apply, epoxy primer for
protection of GRP against osmosis.
• Provides protection against osmosis in 5 coats
• Useable down to 5°C
• Fast drying allows multiple coat application in
a single day
Area: Below the waterline.
Finish: High Sheen
Practical Coverage (m²/Lt): 6.0
No. of coats: 4
Substrates: GRP. Apply to hull after
removing Gelcoat
Application: Brush, Roller
2.5 Litre
5-60871
–
• Quick drying, easy to apply, two-part epoxy primer
• Offers excellent anticorrosive protection
• Can be used as an antifouling tie-coat over
existing epoxy primers
GELSHIELD® 200
Area: Below the waterline.
Finish: Matt
Practical Coverage (m²/Lt): 8.1
No. of coats: 5 - 6
Substrates: GRP
Application: Brush, Roller
Thinner: No. 7
Area: Below the waterline. Finish: Semi Gloss
Practical Coverage (m²/Lt): 11.3
No. of coats: 3 - 7
Substrates: GRP, Steel,
Colour 1 Litre
Aluminium, Lead
Black
5-60870
Application: Brush, Roller, Spray
Off
White
5-60872
Thinner: VC® General Thinner
INTERPROTECT®
• Conventional one-part primer for use above the water
• Quick drying, with anticorrosive properties
• Pigments contain aluminium flake to provide an
anti-corrosive protective barrier
Area: Above water, under one-part undercoats
(Do NOT overcoat with two-part products)
Practical Coverage (m²/Lt): 12.0
No. of coats: 4
Substrates: Wood, Steel, Aluminium, Zinc
Application: Brush, Roller, Spray
Thinner: No. 1
• Osmosis defence for GRP and anticorrosion
barrier for metal
• Advanced self-levelling formulation requires
no sanding between coats
• Smooth surface – ideal primer base
for antifoulings
Colour 2.25 Ltr
Green 5-60867
Blue
5-60869
Visit www.yachtpaint.com
for downloadable datasheets.
Colour
Black
5 Litre
5-60891
20 Litre
5-60892
INTERZONE 954
A two component, low VOC, high solids, modified
epoxy barrier coat designed to give long term
protection from a single coat application.
It will continue to cure when immersed in water and
has excellent cathodic disbondment resistance.
Interzone 954 was primarily designed for use in
offshore splashzone maintenance, where its
continued cure under immersed conditions make it
ideal for coping with tidal movements & surges.
It may be applied to reoxidised and slightly
damp surfaces and should be mixed in a 4:1
mix by volume.
Can be tinted to any BS or Ral number, contact us
for details. Also available in 20 litre drums.
Finish: Gloss
Application: Airless Spray, Air Spray, Brush, Roller
5 Litre
5-60800
INTERNATIONAL PAINTS 2012
7
International
Topcoats
TOPSIDE FINISHES & UNDERCOATS
PERFECTION (2 Pack Polyurethane Gloss)
• Ultimate performance, two-part polyurethane finish
• Chemical cure for the hardest finish & highest
abrasion resistance
• Unique UV protection for superior, long-lasting
gloss and colour
• Professional-quality results
made easy
Area: Above the waterline
Finish: High Gloss
Practical Coverage (m²/Lt): 12.0
No. of coats: 2 - 3
Substrates: GRP, Wood, Steel,
Aluminium
Application: Brush, Roller
Thinner: No.9
PERFECTION UNDERCOAT
Colour
Platinum
Mediterranean White
Off White
Royal Blue
Snow White
Jade Mist Green
Chilli Red
Mauritius Blue
Flag Blue
Fighting Lady Yellow
Cream
Rochelle Red
Lauderdale Blue
Jet Black
• High performance two-part
polyurethane undercoat
• Provides an excellent base for a
long-lasting gloss finish
• Easy application, fast drying and
easy sanding
• Semi-gloss appearance
750ml
5-60350
5-60352
5-60354
5-60356
5-60358
5-60360
5-60362
5-60364
5-60366
5-60368
5-60370
5-60372
5-60374
5-60376
Area: Above the waterline
Finish: Semi Gloss
Practical Coverage (m²/Lt): 12.0
No. of coats: 1 - 2
Substrates: GRP, Wood*, Steel*, Aluminium*
(*over suitable primer)
Application: Brush, Roller
Colour 750ml
Thinner: No.9
White 5-60390
Platinum
Med White
Off White
Royal Blue
Snow White
Jade Mist Green
Chilli Red
Mauritius Blue
Flag Blue
Fighting Lady Yellow
Cream
Rochelle Red
Lauderdale Blue
Jet Black
TOPLAC® (1 Pack Gloss)
• Premium quality high-gloss durable yacht enamel
• Silicone alkyd formula lasts twice as long as conventional one-part enamels
• Excellent UV resistance
• Extended gloss and colour retention characteristics
• Easy to apply giving deep, lustrous finish
Colour
Cream
Mediterranean White
Ivory
Norfolk Green
Rescue Orange
Fire Red
Squall Blue
Snow White
Oxford Blue
Danube Blue
Atlantic Grey
Mauritius Blue
Bounty
Yellow
Rochelle Red
Lauderdale Blue
Donegal Green
Bondi Blue
Jet Black
Rustic Red
Sapphire Blue
750ml
5-60450
5-60452
5-60454
5-60456
5-60458
5-60460
5-60462
5-60464
5-60466
5-60468
5-60470
5-60472
5-60474
5-60476
5-60478
5-60480
5-60482
5-60484
5-60486
5-60488
5-60490
2.5 Litre
–
5-60453
–
–
–
–
–
5-60465
–
–
–
–
–
–
–
–
–
–
–
–
–
Undercoat
White Pre-Kote
White Pre-Kote
White Pre-Kote
Blend*
Blend*
Blend*
Blue/Grey Pre-Kote
White Pre-Kote
Blue/Grey Pre-Kote
Blue/Grey Pre-Kote
Blue/Grey Pre-Kote
Blue/Grey Pre-Kote
Blue/Grey Pre-Kote
White Pre-Kote
Blend*
Blue/Grey Pre-Kote
Blue/Grey Pre-Kote
Blue/Grey Pre-Kote
Blue/Grey Pre-Kote
Blend*
Blue/Grey Pre-Kote
Area: Above the waterline
Finish: High Gloss
Practical Coverage (m²/Lt): 12.0
No. of coats: 1 - 2
Substrates: GRP, Wood,
Steel, Aluminium
Application: Brush, Roller
Thinner: No.1
NEW
Colour
Sapphire Blue
Cream
Med White
Ivory
Norfolk Green
Rescue Orange
Fire Red
Squall Blue
Snow White
Oxford Blue
Danube Blue
Atlantic Grey
Mauritius Blue
Bounty
Yellow
Rochelle Red
Lauderdale Blue
Donegal Green
Bondi Blue
Jet Black
Rustic Red
*Blend = 50% White Pre-Kote/50% finish colour
The printing processes used in producing the colour charts do not allow
exact colour reproduction & we recommend that you should check for
accuracy before applying. International Paints colour charts are available.
8
INTERNATIONAL PAINTS 2012
Visit www.yachtpaint.com
for downloadable datasheets.
International
Miscellaneous
TOPSIDE FINISHES & UNDERCOATS
PRE-KOTE UNDERCOAT
MATTING ADDITIVES
• Undercoat for one-part finishes
• Excellent opacity allows for easy colour changing
• Long-lasting, easy to apply and rub down
• Long overcoating times allow coat-on-coat application
Area: Above the waterline
Finish: Low Sheen
No. of coats: 1 - 2 Thinner: No.1
Practical Coverage (m²/Lt): 12.0
Substrates: GRP, Wood*, Steel*, Aluminium*
(*over suitable primers)
Application: Brush, Roller
Matting additives can be added to both International
finishes and varnishes; and depending on the mix
ratio between the product and the additive, a variety
of gloss, satin or matt effects can be achieved.
International produces two types of matting additive,
suitable for use with either the one-part or two-part
products in the range.
Area: Above the waterline Thinner: No.1
Application: Brush, Roller, Conventional Spray
(professional spray application only)
Colour
White
Blue/Grey
375ml
5-60519
–
750ml
5-60520
5-60523
Description
One Pack Matting Additive 750ml
Two Pack Matting Additive 750ml
2.5 Litre
5-60521
–
Part No.
5-60500
5-60501
PAINT & NON-SLIP COATINGS
DANBOLINE BILGE & LOCKER PAINT
INTERDECK® (Non-Slip Coating)
• Hard wearing coating for bilges, lockers and bulkheads
• Chemical resistance to fumes, fuel and oil
• High opacity for thorough coverage
• Cleans easily for reduced maintenance
Area: Above and below the waterline.
Finish: High Sheen
Practical Coverage (m²/Lt): 11.0
No. of coats: 1 - 2
Substrates: GRP, Wood*, Steel*, Aluminium*
(*over suitable primers)
Application: Brush, Roller Thinners: No.1
Colour
Grey
Red
White
750ml
5-60510
5-60512
5-60514
2.5 Litre
5-60511
–
5-60515
Grey
Red
White
• Slip resistant polyurethane deck paint
• Contains fine mineral additive for hard wearing,
non-slip surface
• Suitable for all substrates
• Low sheen finish prevents sunlight dazzle
• Apply straight from the can with brush or roller
Area: Above the waterline. Finish: Low Sheen Colour
Practical Coverage (m²/Lt): 9.5
White
No. of coats: 1 - 2
Squall Blue
Substrates: GRP, Wood*, Steel*, Aluminium* Cream
(*over suitable primers)
Grey
Application: Brush, Roller Thinners: No.1
Sand Beige
White
Squall Blue
Cream
NON-SLIP ADDITIVE
NON-SLIP AGGREGATE
Non-Slip Additive is a synthetic, granular material that can
be added to topside finishes prior to application or sprinkled
onto wet paint as an aid to providing a more slip-resistant
finish. As with the matting additives, the final result is
determined by the amount of material added into the finish.
20g Part No. 5-60550
Silica sand non-slip aggregate for
a range of coating schemes.
To be added to the top coat to
give a non-slip surface profile.
Grey
750ml
5-60535
5-60536
5-60537
5-60538
5-60539
Sand Beige
500g Part No. 5-60555
EPOXY FILLER
WATERTITE EPOXY FILLER
Your boat is not only under attack from the
elements. Damage can also result from collisions
or other physical impacts. Watertite is a two-part
water resistant filler, suitable for use with most
common substrates
Area: Above and below the waterline Thinners: No.7
Practical Coverage (m²/Lt): 1.0 (at 1mm thick)
Substrates: GRP, Wood, Steel, Aluminium, Lead
FILLERS SHOULD ALWAYS BE APPLIED ONTO
PRIMER AND NOT OVER BARE SUBSTRATES.
• Quick drying epoxy filler suitable for use on GRP,
Metals and rigid Wood constructions.
• The formulation does not shrink and is extremely
water resistant, making it suitable for localised
osmosis damage repairs.
• Fills up to 20mm without sagging and is ideal for
use above and below the waterline.
• Watertite is high strength and has good adhesion properties.
It is very fast drying and supersmooth when dry.
• This is an extremely hard dry epoxy filler, therefore do not
over apply.
Visit www.yachtpaint.com
for downloadable datasheets.
250ml
1 Litre
5-60750 5-60751
INTERNATIONAL PAINTS 2012
9
International
Varnishes
VARNISHES
PERFECTION PLUS ( Two-Pack Polyurethane Varnish)
GOLDSPAR® SATIN (One-Pack Varnish)
• Ultimate performance, clear, two-part
polyurethane varnish
• Chemical cure for the hardest finish and highest
abrasion resistance
• Superior gloss lasts four times longer than
conventional one-part varnishes
• Professional quality results made easy
• 2:1 mix ratio: Easy to measure and mix
• A satin finish polyurethane varnish for interior use
• Resistant to hot water, mild acids and alkalis
• Fast-dry formulation minimises dust contamination
Finish: High Gloss No. of coats: 2 - 5
Practical Coverage (m²/Lt): 12.0
Substrates: Wood (suitable for use direct to oily
timber e.g teak or iroko)
Application: Brush, Roller Thinners: No.9
UV Protection/Gloss Retention: ❂❂❂❂❂❂
Finish: Satin No. of coats: 3
Practical Coverage (m²/Lt): 10.30
Substrates: Wood (suitable for use
375ml
750ml
direct to oily timber e.g teak or iroko)
5-60725
5-60726
Application: Brush, Roller
Thinners: No. 1 (Brush/Roller) No. 3 (Spray)
UV Protection/Gloss Retention: For interior use only
750ml 2.5 Litre
5-60701 5-60702
SCHOONER® (One-Pack Varnish)
• Premium quality, traditional tung oil varnish with
excellent UV protection
• Rich golden colour and deep gloss
• Good flow-out and self-levelling characteristics
for easier application
Finish: High Gloss No. of Coats: 5-7
Practical Coverage (m²/Lt): 14.3
375ml
750ml
Substrates: Wood (suitable for use
5-60705 5-60706
direct to oily timber e.g teak or iroko)
Application: Brush, Roller, Spray
Thinners: No. 1 (Brush/Roller) No. 3 (Spray)
UV Protection/Gloss Retention: ❂❂❂
2.5 Litre
5-60707
COMPASS (One-Pack Varnish)
• Fast-dry, high durability, polyurethane high gloss varnish
• Excellent resistance to abrasion, oils and chemicals
• Fast-drying, apply 2 coats per day, sand only after 2-3 coats
• Light amber colour
• Contains HALS and UV absorbers
Finish: High Gloss No. of coats: 3 - 6
Practical Coverage (m²/Lt): 12.9
Substrates: Wood (suitable for use direct to
oily timber e.g teak or iroko)
Application: Brush, Roller, Spray
Thinners: No. 1 (Brush/Roller) No. 3 (Spray)
UV Protection/Gloss
375ml
750ml 2.5 Litre
5 Litre
Retention: ❂❂❂
5-60730 5-60731 5-60732 5-60733
CLEAR WOOD SEALER FAST DRY
• A premium fast drying, clear, two-pack polyurethane primer.
• Its fast dry properties enable up to 4 coats to be
applied in 1 day at 23°C/73°F unthinned.
• Suitable for use above the waterline on both interior
and exterior surfaces where it provides an
exceptional impact, scratch and wear resistant
primer surface ready for overcoating with one or
two pack products.
Area: Above the waterline. Finish: High Gloss
Practical Coverage (m²/Lt): 10.0 (brush/roller), 6.60 (spray)
No. of coats: 4 Substrates: Wood
Application: Brush, Roller, Spray Thinners: No.9
SCHOONER® GOLD (One-Pack Varnish)
• Advanced UV technology, longest-lasting one-part varnish
• Exceptional deep gloss and colour are retained
over the lifetime of the coating
• Sand between every other coat
• Traditional amber colour
• Use without thinning in warm/higher
temperature climates
Finish: High Gloss No. of coats: 2 - 6
Practical Coverage (m²/Lt): 12.9
Substrates: Wood (suitable for use direct to
oily timber e.g teak or iroko)
Application: Brush, Roller, Conventional Spray
Thinners: No. 1 (Brush/Roller) No. 3 (Spray)
UV Protection/Gloss Retention: ❂❂❂❂
2.5 Litre
5-60727
750ml
5-60735
WOODSKIN
750ml 2.5 Litre
5-60711 5-60712
ORIGINAL (One-Pack Varnish)
• Traditional, general purpose gloss varnish
• Good flow, flexibility and gloss retention
• High clarity finish for light colour woods
• Interior, exterior and over existing varnish
Finish: Full Gloss No. of coats: 3
Practical Coverage (m²/Lt): 11.7
Substrates: Wood (suitable for use
375ml
750ml
direct to oily timber e.g teak or iroko)
5-60720 5-60721
Application: Brush, Roller, Spray
Thinners: No. 1 (Brush/Roller) No. 3 (Spray)
UV Protection/Gloss Retention: ❂❂
2.5 Litre
5-60722
A flexible wood oil/varnish hybrid that acts like a skin
for your wood. Microporous properties allow Woodskin
to breathe with your wood; tiny holes let the paint film
expand and contract but are small enough to repel
water; the cause of mould & mildew.
• Easy to apply; no need to thin or sand between coats
• Good flow and levelling
• Dries to a subtle, translucent sheen.
• Penetrates deep into your wood, leaving a thin
surface film that will not crack or flake.
750ml
• Minimal maintenance; simply clean and reapply
5-60737
season after season
• The natural teak colour compliments any wood type
Finish: Satin No. of coats: 3 Theoretical Coverage (m²/Lt): 10
Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko)
Application: Brush Thinners: Do not thin
UV Protection/Gloss Retention: ❂❂❂
UV Protection/Gloss Retention Ratings:
10
INTERNATIONAL PAINTS 2012
❂ Good ➔ ❂❂❂❂❂❂ Outstanding
International
Boatcare & Thinners
BOATCARE
PREMIUM TEAK OIL
SUPER CLEANER
• High strength formula removes wax, dirt, oil & grease
• Does not damage acrylic glass
For use above the waterline.
Suitable for: GRP, painted and metal surfaces
Part No. 5-60930 (500ml)
POLWAX
• Clean, polish and wax all in one
• Simple solution to save you time and effort
For use above the waterline.
Suitable for: GRP & Paintwork
Part No. 5-60931 (500ml)
Thinners are solvents which are usually the same, or very similar, to those
used within the product they are recommended with. Thinners can be used
as an additive to ease application, or to clean brushes and equipment.
THINNERS NO. 1
A general purpose thinner, for use with one-part paints and varnishes.
For above the waterline. 500ml Part No. 5-60900 1 Litre Part No. 5-60901
THINNERS NO. 3
Typically used with antifouling paints (excluding Micron® Optima and VC®
products), also used to aid with the spray application of our one-part varnishes.
For below the waterline.
500ml Part No. 5-60904 1 Litre Part No. 5-60903
• Penetrates even moist wood, to protect & enhance
• Contains rust protection wax for screws, nails
and fixings
For use above the waterline.
1-2 coats recommended by brush.
Part No. 5-60940 (500ml)
TEAK RESTORER
• Cleans and restores teak and hard wood surfaces
• Does not bleach or damage the surrounding surfaces
For use above the waterline.
Part No. 5-60941 (500ml)
THINNERS NO. 7
Formulated for use with epoxy type products.
For above and below the waterline. 1 Litre Part No. 5-60907
THINNERS NO. 9
For use with two-part polyurethane products.
For above the waterline. 1 Litre Part No. 5-60909
VC® GENERAL THINNERS
Specially formulated for use with VC® products.
For below the waterline. 1 Litre Part No. 5-60920
Many More International
Products Available...
Contact your local depot for further details...
Visit www.yachtpaint.com
for downloadable datasheets.
INTERNATIONAL PAINTS 2012
11
The Aquafax
Catalogue
For Brushes, Rollers, Scrapers and Sanding
Equipment See Section 5 of the Aquafax Catalogue
12
INTERNATIONAL PAINTS 2012