Ball Valves - Legend Valve

Transcription

Ball Valves
Catalog
It's all about performance
TM
1-800-752-2082
www.legendvalve.com
It takes more than just hard work
to become a part of a legend.
Legend is committed to technical excellence in all
aspects of our business. We maintain a technical
laboratory where we conduct live product testing,
metallurgical and material element analysis, new
product development and failure analysis. Our
technical staff of mechanical engineers, master
plumbers and support technicians are here to
ensure that you have the best possible product
quality and support. Guaranteed quality, guaranteed
performance, legendary customer service, expert
engineering, and on-demand technical assistance
is Legend’s commitment to creating customer
astonishment.
No Lead Product Identification
www.legendvalve.com
www.legendvalve.com
PRESS
NO LEAD and
PRESS order.
Legend No lead brass or
bronze
valves and fittings are easy1/2”
to identify
1/2”
1/2” P-200
1/2” P-200 No Lead
BALL VALVE
BALL VALVE
Example: If selecting
a ½” size P-200 press ball valve, the item number
101-003 is for the
Product meets National and
Product not legal for use in potable
no lead plumbing laws.
water systems after January 4, 2014.
traditional brass
version and item number 101-003NL is for the nostate
lead
brass P-200NL.
END
EG
L
END
EG
L
G
www.legendvalve.com
1/2”
1/2” P-200
PRESS
BALL VALVE
WARNING: Wetted surface area has a weighted average lead
content greater than 0.25%. It is unlawful to use this product to install
or repair any system that provides water intended for human
consumption in the United States (Effective 1/4/2014).
1/2” P-200 / 101-003
SAMPLE
N
O L AD
E
TM
1/2”
This product has been 3rd party certified to contain less
than 0.25% lead by weighted average on wetted surface
areas and can be used on all potable water systems
1/2” P-200 No Lead
/ 101-003
NO 1/2”
LEADP-200
PRESS
BALL VALVE
1/2” P-200 No Lead / 101-003NL
SAMPELE
GEND
G
REEN
REEN
TM
www.legendvalve.com
TM
1/2”
1/2” P-200
NO LEAD
PRESS hydronics),
As many brass alloy valves
and fittings have multiple uses (ie. gas, process piping,
BALL VALVE
Legend traditional brass and bronze valves and fittings for non-potable water applications are
Product
not
legal
for
use
in
potable
1/2” P-200 No Lead / 101-003NL
marked and identified.
SAMPLE
G
1/2”
REEN
1/2”
1/2”
NO LE
BALL
state no lead plumbing laws.
TM
1/2” P-200
PRESS
BALL VALVE
1/2” P-200 / 101-003
SAMPLE
w
END
EG
L
www.legendvalve.com
1/2”
www.legendvalve.com
1/2” P-200 No Lead
/ 101-003
NO 1/2”
LEADP-200
PRESS
BALL VALVE
SAMPLELE
GEND
G
REEN
TM
SAMPLE
END
EG
L
REEN
NO LEAD
This product has been 3rd party c
than 0.25% lead by weighted aver
areas and can be used on all po
1/2” P-200 No Lea
SAMPLE
All of the Legend NO
noLEADlead brass and bronze ball
valves are marked
with a “NL” or “LF” in the forged
1/2” P-200 No Lead / 101-003NL
or cast body to signify they are made of no lead
brass alloy. The handles are marked likewise along
with third party certification logos.
G
2
END
EG
L
SAMPLE
L
G
TM
NO LEAD
www.legendvalve.com
content greater
than 0.25%. It is unlawful to use this product to install
REEN
TM
1-800-752-2082
www.legendvalve.com
CONTENTS
Signature Series private label ball
valve allows you to customize the
handle, including using your logo.
This program is available for select
ball valves. For more information, call
Legend Customer Service at
1-800-752-2082.
N
Legend Performance Guarantees:
• 100% 24 hour order processing
or 5% off the order.
• 100% line item fill rate
or 5% off the backorder.
• 100% line item accuracy
or 5% off the error.
• All sales are guaranteed.
• No minimum order.
• No case requirements.
A Legendary Guarantee: 5 year /
$25 warranty. For complete details of
this legendary warranty please visit
www.legendvalve.com
lve.com
www.legendva 2-2082
1-800-75
GEND
E
D
L
Maintenance-Free Ball Valves (T/S-1001).................. 4-6
Full Port Ball Valves T/S-1002.................................... 7-9
Full Port Ball Valves T/S-2000................................ 10-11
Press Fitting Ball Valves P-200............................... 12-13
PEX Ball Valves....................................................... 14-16
Push Fit & Compression Ball Valves....................... 17-18
Specialty Ball Valves............................................... 19-20
Isolation Flanged Ball Valves.................................. 20-21
Industrial Full Port Ball Valves................................ 22-23
Mini-Ball Valves...................................................... 23-25
Ball Valve Accessories..................................................26
Stainless & Carbon Steel Ball Valves..................... 27-30
Gas Ball Valves....................................................... 31-32
Quarter Turn Low Pressure Valves.......................... 33-35
O LEA
TM
SUBMITTAL
SHEET
ITEM TAG
ER
PART NUMB
JOB NAME
DATE
JOB LOCATION
DATE
CONTRACTOR
VAL
ENGINEER APPRO
LEAD-FREE
BALL VALVE
FULL PORT
Pictured
ed in
1NL
tested and certifi l Public Law
Model T-100
DNL
• Third-party
U.S. Federa
and T-1001L
ations,
compliance with lead-free plumbing law).
le water install
nal
all no-lead potab
111-380 (Natio
is suitable for
laws.
JOB NAM
ard 61-G.
Lead-free design of all lead-free plumbing
E
ANSI / NSF Stand
iance
• Certified to
in full compl
0
stem.
JOB
SP-11
of
LOCATIO
to MSS
d blowout-pro
SUBM
• Conforms
N
Bottom-loade
seal.
ITTAL
comply with:
dual O-ring stem
•End connections CONTRA(FNPT
SHEET
CTOR )
Maintenance-free
seats.
B1.20.1
n* TFM PTFE
female sweat
ANSI / ASMEENG
solder)
1/8”- 4” and
Improved Dyneo
INEER
8 (CTS
B16.1
threaded sizes
APPROV
Pictured
ANSI / ASME
female pipe
AL facility.
ited
1LD
Available in
Model T-100
2” FNPT sizes.
in an ISO accred
1/2”- 4”.
ble on 1/2” to
Manufactured
tubing sizes
•
availa
is
option
DATE
natural,
locking device
ed for use with petroleum
Pre-installed
• CSA Certifi
d, mixed, liquid,
DATE
manufacture
T-2000
k (PSI)
ir mixtures.
MxSNL
ure, Non Shoc
and LP gas/a
p.s.i.
as a gas
1/8”- 2” 600
Lead-fr
Working Press
Z21.15 for use
:
ee
ANSI Standard
p.s.i.
pressure (CWP)
valve for 1/2-lb
installatio design is sui •
2-1/2”- 4” 400
Cold working
nce connector
ns, in full table applia
for all
3”).
no150 p.s.i.
complia system
s (1/2”Dezinc
lead pot
lb house
ificatio
nce of
:
ablfor
useterin 2 or 5
e wa
n-resist
all lead-fr
3-88
exposu
Saturated Steam
ed
ant
re to a
• CSA Certifi ee(1/4”
1/2”- 2”).
&ing
wide var (DZR)
forged systems plumb
laws. gas piping• Third-p
The 3/4
brass res
iety of piping
" MNPT
arty tes
use in
ON
water
ists cor
3 for
SPECIFICATI
complia
con ASME B16.3
ted and
threade
x 3/4"
rosion 1”).
ION
ons.
nce wit
Sweat • ANSI / diti
certifie
d dire
(1/2”-from
SPECIFICAT
A510 UNS G10060
h U.S.
Law 111
d in
Approved
MATERIAL
cop
MATERIAL
s up to 125 psig
-evident ASTM
per tub ctly into a tan configu
Federa
system
ration
UNS G10060
steel, tamper
ing righ
ASTM A510
l Public
k
allows ved for fire protection plumb -380 (Nation
PART
Dacromet coated
t at the or boilery Mutua
al lead-fr
appro the valve
ing law
High-ri
steel
nut
Dyneon*
val•ve.Factor headerl, wit
se
).
to be
ee
Dacromet coated
1 Handwheel
• UPC
permit lever handle
(1/2”- 2”). h the transiti
Viton**
e
PTFE
/ IAPMO
servic
TFM
ting
2 Handle
is
on to
orie
Washer
Standa
certifie
or manifo easy valve ope nted over
Dyneon*
Fluorocarbon
3 Anti-Friction
rd 61-G:
d to AN
the sol
C28500
ld,
rati
UNS
(2)
L
as
on
SI / NS
der
Me
372 lea
CW510
well as
during
in close
connec
TFM PTFE
4 Stem O-rings
F
d conten ets NSF
the sol
C28500
tion,
r
brass
CW510L UNS
dering a reduced cha proximity to
t requre
Lead-free forged
5 Thrust Washe
•
pro
Bot
the
nce of
Conform
ments.
cess.
brass
tom-loa
tank wa
Dyneon*
handle
s to MS
Lead-free forged
6 Stem
ded, blo
ll
sleeve
C28500
packin
S SP-110
CW510L UNS
damage
g and EPD wout-proo
TFM PTFE
7 Ball
f stem
C28500 und
• End
brass
M rubber
CW510L UNS
er tem
feature
connec
D s a dua
Lead-free forged
8 Seats (2)
peratu
O-ring
tions com
UNS G10060
brass
re and
ANSI /
ASTM A510
Self-cl
Lead-free forged
9 Body
ply wit
pressu design, assurin2 l-seal PTFE
ASME
eaning
h:
r
re extrem
B1.
g
et coated steel
AN
pos
1
chr
20.
Dacrom
10 End Adapte
sca
SI
itiv
ome-plate
1 (MNPT)
/ ASME
es.
shown)
ling.
e sealing
Device (Not
d ball res
B16.18
11 Locking
ny.
(CTS sol
ists min
the 3M compa
• Manuf
der)
eral bui
trademark of
actured
ld-up and
is a registered
t.
in an ISO
*Dyneon TFM
6
ark of DuPon
accred
registered tradem
Worki
**Viton is a
ited fac
ng
ility
Cold wo Pressure, No
3
rkin
n-Shoc
B
CV**
Satura 4 g pressure
k (PSI)
S
D
ted
(CW
C
DIMENSION
Steam
B
5
A (CXC)
(WSP): P): 600 CW
5.00
P
T/S-1001NL
LEAD-F
REE FO
Size
A (IPS)
1/8”
1.54
1/4”
1.62
3/8”
1.77
1/2”
2.08
3/4”
2.36
1”
2.91
3.30
3.74
1”-1/4”
1”-1/2”
1.02
0.31
1.66
1.02
0.31
1.66
1.28
0.39
3.01
7.74
2.32
1.46
0.59
3.01
14.68
1.89
0.79
3.70
28.43
3.15
2.05
1.00
3.70
55.04
3.82
2.24
1.26
3.70
113.24
4.31
2.75
1.57
5.33
161.77
5.00
4.25
6.10
3.07
1.97
5.75
7.00
4.01
2.28
6.30
8.03
4.33
2.68
3”
8.15
5.12
3.50
4”
7.19
2”
2”-1/2”
RGED
BRAS
S FULL
PORT
BALL
DZR
endvalv
1-800-75 e.com
2-2082
d
ITEM TAG
PART NUM
BER
VALVE
Pictur
ed:
T-2000
MxSN
1
.i.
DIMEN
SIONS
Nomin
al Size
3/4” Sw
eat x MN
PT
MATER
Pictur
C
A
2.73
B
2.29
C
0.71
ed:
D
4.1
Pictured
E
4
IAL SP
243.81
93/4" MN
5.33
8
ECIFIC
7
PT
PART
ATION 10
277.32
1 Han
6.81
dle nut
MATER
2310.83
IAL
Lever hand
6.81
Zinc plat
le
3 Pack
ed stee
l
Zinc plat
7.32 4 532.68ing nut
SPECIFI
ed stee
CATION
Stem pack
l
Forg
ASTM
ed bras
ing
5 Stem
A6, Q23
s
5
PTFE
O-ring
ASTM
6 Anti
A6, Q23
-fric
5
EPDM
UNS Allo
rubber
7 Stem tion washer
y C38500
PTFE
FR101
8 Bod
resin
y
Lead-free
Commer
9 Ball
forged
cial grad
brass
Lead-free
e
FR101
10 Sea
resin
forged
brass
ts (2)
Lead-free
UNS Allo
11 End
chrome
y C46500
adapter
plated
PTFE
UNS Allo
forged
y C46500
brass
Lead-free
UNS Allo
forged
y C46500
brass
FR101
resin
UNS Allo
y C46500
T-2000
MxSN
L
Explod
ed View
1NL
Model T-100
Cut-away
L
2
3
4
5
6
7
8
9
10
150 p.s
7.62
Oxygen cleaning for most valves
and fittings is available. Material is
cleaned, tagged and bagged. Lead
time is five business days. For more
information, call Legend Customer
Service 1-800-752-2082.
www.leg
No Lea
www.legendvalve.com
1-800-752-2082
11
SUBMITTAL SHEET
A
D
JOB NAME
ITEM TAG
JOB LOCATION
PART NUMBER
CONTRACTOR
DATE
ENGINEER APPROVAL
DATE
FULL PORT PRESS-TO-CONNECT BALL VALVE
B
P-200 Legend-Press™
Press-to-connect end connections are designed for installation onto ASTM B88 types K,
L and M hard-drawn copper tubing. Coiled (annealed) soft copper tubing is not
recommended, but can be used if ends are made round. See insertion depth chart below.
• NSF Certified to
ANSI/NSF Standard
Deeper tubing sockets and dual O-rings at each press connection, provide extra stability
during the pressing process as well as enhanced sealing.
• Valve construction
conforms to MSS
SP-110; press-type
end connections are
currently excluded
from this standard
Compatible with commercially-available VUS profile jaws
C
Oversized lever handle with pre-drilled tag hole is ideal for commercial applications
Sizes 1/2" to 1-1/4" Press x Press are also available with assembled extended T-handles
and color-coded identification discs imprinted with the following: Red; "HOT" Blue; "COLD"
and Purple; "RECLAIMED WATER" for insluated tubing applications.
Pictur
E
ed:
T-2000
Mx
Cut-awa SNL
y
61-8 and Standard
61, Annex G
• Threaded end
connections conform
to ANSI / ASME B1.20.1
• Manufactured in an
ISO accredited facility
Available in sizes; 1/2" to 4" in the Press x Press configuration, 1/2" to 2" in the MIP x Press,
and FIP x Press configurations and 1/2" to 1-1/4" in the MIP Union x Press configuration.
F
A
Working Pressure, Non-Shock (PSI)
Cold working pressure (CWP): 1/2" and 3/4": 600 psi
1" and 1-1/4": 500 psi
1-1/2" and 2": 400 psi
Saturated steam (WSP):
Not suitable for steam service
Maximum service temp:
230˚ F
D
6
Stem area
detail
B
3
E
C
MATERIAL SPECIFICATION
PART
MATERIAL
1 Ball
Chrome plated forged brass ASTM B124 UNS C37700
2 Thrust washer
SPECIFICATIONS
TFM PTFE
3 Handle
4
5
1
3M Dyneon*
Dacromet coated steel
4 End adapter
Legend-PressTM
ASTM B124 UNS C37700
TFM PTFE
3M Dyneon*
Dacromet coated
steel with resin lock
Forged brass
ASTM B124 UNS C37700
Chrome plated forged brass ASTM B124 UNS C37700
Fluoroelastomer
8
9
DuPont Viton**
10 Socket O-rings (4)
[2 per Socket]
EPDM
Commercial grade
11 Anti-friction washer
TFM PTFE
3M Dyneon*
*Dyneon TFM is a registered trademark of the 3M Company.
**Viton is a registered trademark of DuPont
Cut-away view
11
ASTM A510 UNS G10060
8 Stem
9 Stem O-rings (2)
10
A
ASTM A510 UNS G10060
Forged brass
5 Seats (2)
6 Handle nut
7 Body
7
Legend-PressTM
2
Stem area detail
See P-200XL-C submittal for 2-1/2" to 4" sizes
DIMENSIONS
Size
1/2"
†
3/4"
†
1"
†
A
3.90
4.51
4.77
1-1/4" 5.08
†
B
1.43
1.90
2.06
2.24
C
0.59
0.79
1.00
1.26
D
3.04
3.74
3.74
3.74
E
2.05
2.68
3.01
3.40
F
Legend-PressTM Tubing Insertion Depth
5.00
6.00
6.13
6.28
1-1/2"
5.83
2.77
1.58
5.38
4.15
8.30
2"
7.33
3.08
2.00
5.38
4.76
9.15
Nominal Tubing Size:
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
Insertion Depth: In.
MM
1-3/8"
35
1-9/16"
40
1-9/16"
40
1-9/16"
40
1-3/4"
45
2-3/16"
55
Note: These configurations are also available with assembled extended T-handle. The T-handle's width is 3.06" The
overall height from the stem base to the top of the handle is 1.76" and the diameter is 1.28". At least 1.25" of insulation
can be applied onto the valve's body and around the T-handle area without affecting the operation of the valve.
†
Legend Technical Support Visit
www.legendvalve.com to search for
specific model and item technical
data provided in the comprehensive
submitttal data sheets, as depicted
with the examples to the left. These
include all dimensional, specificiation,
listings, ratings and approvals data.
3
1-800-752-2082
www.legendvalve.com
Maintenance-Free Ball ValveS
T/S-1001Ball Valve
The 1001 Series Full Port Ball Valves are Maintenance-Free because the stem seals with two Viton® O-rings instead of the traditional gland
follower or packing gland design. No call backs are necessary to tighten a packing nut. The bottom loaded stem is blowout proof and includes
a PTFE thrust washer that reduces friction and makes for easier actuation. The valve body, end adaptor and cavity ball are forged brass for
lighter weight and greater durability, resulting in less torque necessary to actuate the valve and longer life for the seats. The steel handle
is Dacromet® coated and will not corrode in aggressive environments. Every valve is manufactured to precise tolerances in a completely
automated ISO certified factory and 100% pressure tested. The 1001 Series of ball valves are offered in a variety of configurations for
residential, commercial and industrial applications. The T/S-1001 is constructed of UNS C37700 forged brass. The T/S-1001NL is constructed of
no lead binary brass alloy.
• Saturated Steam (WSP): 150 PSI
• Cold Working Pressure (CWP): 600 PSI (1/8”- 2”); 400 PSI (21/2” to 4”).
• Conforms to MSS Standard Practice 110.
• Threaded end connections comply with ANSI/ASME B1.20.1
• Solder end connections comply with ANSI/ASME B16.18
1
2
3
4
5
7
6
9
8
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
nti-corrosive Dacromet® Coated Handle
A
Tamper Evident Dacromet® Coated Nut
TFM® Anti-Friction Washer
Forged Brass Stem
Dual Viton® O-rings
Forged Brass End Adapter
Expansion Slot
TFM® Seat
One Piece Chrome Plated Forged Brass Cavity Ball
Forged Brass Body
Viton and Teflon are registered trademark of Dupont. Dacromet is a
registered trademark of Dacral. Dyneon TFM is a trademark of 3M.
10
4
1-800-752-2082
www.legendvalve.com
T/S-1001 Maintenance-Free Forged Brass Full Port Ball Valve
Maintenance-free design with Dacromet® coated steel handle and nut for greater
corrosion resistance. Fully rated ball valve. Available in sizes and configurations
1/8”- 4”, FNPT x FNPT and 1/2”- 4”, Sweat x Sweat.
• T-1001 CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
and LP g as air mixtures: 1/2 lb (1/4”- 3”); 2 lb and 5 lb (1/4”, 1/2”- 2”).
• T-1001 ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 1”).
• T-1001 UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids,
#6 oil at 250 deg. F ( 1/4”- 2”).
• T-1001 UL Listed 757X for fire protection service ( 1/2”- 2”).
• T-1001 Factory Mutual approved for fire protection service (1/2”- 2”).
T/S-1001NL Maintenance-Free No Lead Forged Brass Full Port Ball Valve
Maintenance-free, dual Viton® O-ring stem design, lighter weight and durable forged
no lead brass body, blow-out proof stem, PTFE seats for improved wear. Does not
require any additional steps to solder, as compared to traditional brass valves. Suitable
for potable water applications. 1/8”- 4”, FNPT x FNPT and 1/2”- 4”, Sweat x Sweat.
• Third party certified no lead, ANSI/NSF 61-G, NSF.
• T-1001NL CSA Certified for use with natural, manufactured, mixed, liquid petroleum, and
LP gas/air mixtures: 1/2 lb (1/2”- 3”); 2 lb and 5 lb (1/4”, 1/2”- 2”).
• T-1001NL ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 1”).
• T-1001NL UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids, #6 oil
at 250 deg. F ( 1/4”- 2”).
• T-1001NL Factory Mutual approved for fire protection service (1/2”- 2”).
• T-1001NL UL listed 757X for fire protection service (1/2”-2”).
T/S-1001T Maintenance-Free Forged Brass Full Port Ball Valve with T-Handle
traditional brass body, blow-out proof stem, PTFE seats for improved wear. Coated cast
aluminum tee handle that is light weight and compact in size. Available in sizes and
configurations 1/2” x 1”, FNPT x FNPT and 1/2”- 1”, Sweat x Sweat.
• T-1001T CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
and LP gas/air mixtures: 1/2 lb (1/2”- 3”); 2 lb and 5 lb (1/4”, 1/2”- 2”).
• T-1001T ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 1”).
• T-1001T UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids, #6
oil at 250 deg. F ( 1/4”- 2”).
• T-1001T UL Listed 757X for fire protection service ( 1/2”- 2”).
• T-1001T Factory Mutual approved for fire protection service (1/2”- 2”).
T/S-1001TNL Maintenance-Free No Lead Forged Brass Full Port Ball Valve with T-Handle
no lead brass body, blow-out proof stem, PTFE seats for improved wear. Coated cast
aluminum tee handle that is light weight and compact in size. Available in sizes and
configurations 1/2” x 1”, FNPT x FNPT and 1/2”- 1”, Sweat x Sweat.
• T-1001TNL CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
• T-1001TNL ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 1”).
• T-1001TNL UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids, #6
oil at 250 deg. F ( 1/4”- 2”).
• T-1001TNL Factory Mutual approved for fire protection service (1/2”- 2”).
5
1-800-752-2082
www.legendvalve.com
T-1001TCP Maintenance-Free Chrome Plated Forged Brass Full Port Ball Valve with T-Handle
Maintenance-free, dual Viton® O-ring stem design, light weight and durable forged
traditional brass body, blow-out proof stem, PTFE seats for improved wear. Chrome
plated forged brass. Coated cast aluminum tee handle that is lightweight and compact
in size. Available in sizes and configurations 1/2”- 1”, FNPT x FNPT.
• T-1001TCP CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
• T-1001TCP ANSI ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 1”).
• T-1001TCP UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids,
#6 oil at 250 deg. F ( 1/4”- 2”).
• T-1001TCP UL Listed 757X for fire protection service ( 1/2”- 2”).
• T-1001TCP Factory Mutual approved for fire protection service (1/2”- 2”).
T-1001LD Maintenance-Free Forged Brass Full Port Ball Valve with Locking Device
traditional brass body, blow-out proof stem, PTFE seats for improved wear. Dacromet®
coated steel handle and nut for greater corrosion resistance with Dacromet® coated
steel lock shield that includes eyelet for padlock. Available in sizes and configurations
1/2”- 2”, FNPT x FNPT.
• T-1001LD CSA Certified for use with natural, manufactured, mixed, liquid petroleum, and
• T-1001LD ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 1”).
• T-1001LD UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids, #6 oil
at 250 deg. F ( 1/4”- 2”).
• T-1001LD UL Listed 757X for fire protection service ( 1/2”- 2”).
• T-1001LD Factory Mutual approved for fire protection service (1/2”- 2”).
T/S-1100 Maintenance-Free Forged Brass Full Port Ball Valve with Drain
Maintenance-free, dual Viton® O-ring stem design, light weight and durable
forged traditional brass body, blow-out proof stem, PTFE seats for improved
wear. Ball with drain for maintenance or to prevent freeze. Dacromet® coated
steel handle and nut for greater corrosion resistance. Available in sizes and
configurations 1/2”- 1”, FNPT x FNPT and 1/2”- 1”, Sweat x Sweat.
• Saturated Steam (WSP): not suitable for steam applications.
• Cold Working Pressure (CWP): 500 PSI.
T/S-1100NL Maintenance-Free No Lead Forged Brass Full Port Ball Valve with Drain
Maintenance-free, dual Viton® O-ring stem design, light weight and durable
forged no lead brass body, blow-out proof stem, PTFE seats for improved wear.
Ball with drain for maintenance or to prevent freeze. Dacromet® coated steel
handle and nut for greater corrosion resistance. Constructed of no lead binary
brass alloy. Suitable for potable water applications. Available in sizes and
• Third party certified no lead ANSI/NSF 61-G, NSF.
6
1-800-752-2082
www.legendvalve.com
FULL PORT BALL Valves
T/S-1002 Ball Valve
The 1002 Series Full Port Ball Valves are made of durable forged brass for lighter weight and greater strength. The stem is bottom loaded,
thus blow-out proof. The gland follower design has a PTFE stem packing. The valve body, end adaptor and ball are forged brass. PTFE seats
reduce friction, makes a positive seal and improve seat wear. The chrome plated steel handle has a vinyl covered sleeve. Every valve undergoes
pressure testing. The 1002 Series is offered in a variety of configurations. The Legend 1002 ball valve series has been manufactured for more
than twenty years in the same ISO certified manufacturing facility using best-in-class TQM processes. The T/S-1002 is constructed of UNS
37700 brass alloy. The T/S-1002NL is made using no lead binary brass alloy.
•Saturated Steam (WSP): 150 PSI
•Cold Working Pressure (CWP): 600 PSI (1/4”- 3”)
•Conforms to MSS SP-110.
•Threaded end connections comply with ANSI/ASME
B1.20.1
•Solder end connections comply with ANSI/ASME B16.18
2
1
1.
2.
3.
4.
5.
6.
7.
8.
9.
3
4
5
6
7
8
Steel Handle Nut
Chrome Plated Steel Handle
Forged Brass Packing Nut
PTFE Stem Packing
Forged Brass Stem
Forged Brass Body
PTFE Seats (2)
Chrome Plated Forged Brass Ball
Forged Brass End Adapter
9
7
1-800-752-2082
www.legendvalve.com
T/S-1002 Forged Brass Full Port Ball Valve
Forged traditional brass full port ball valve, bottom load blow-out proof stem with
PTFE packing gland and nut. Available in sizes and configurations 1/4”- 3”, FNPT x
FNPT and 3/8”- 3”, Sweat x Sweat.
and LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/2”- 2”).
• T-1002 UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids, #6
oil at 250 deg. F ( 1/2”- 2”).
T/S-1002NL No Lead Forged Brass Full Port Ball Valve
Forged no lead brass full port ball valve, bottom load blow-out proof stem with PTFE
packing gland and nut. Constructed of no lead binary brass alloy. Suitable for potable
water applications. Does not require any additional steps to solder, as compared to
traditional brass valves. Available in sizes and configurations 1/4”- 3”, FNPT x FNPT
and 3/8”- 3”, Sweat x Sweat.
• Third party certified no lead ANSI/NSF 61-G, Truesdail.
• T-1002NL CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
• T-1002NL UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids, #6
oil at 250 deg. F ( 1/2”- 2”).
• T-1002NL Factory Mutual approved for fire protection service (1/2”- 2”).
T/S-1102 Forged Brass Full Port Valve with Drain
Forged traditional brass full port ball valve, bottom load blow-out proof stem
with PTFE packing gland and nut. Drain for maintenance and freeze protection.
Available in sizes and configurations 1/2”- 1”, FNPT x FNPT and 1/2”- 1”, Sweat
x Sweat.
T/S-1102NL No Lead Forged Brass Full Port Valve with Drain
Forged no lead brass full port ball valve, bottom load blow-out proof stem
with PTFE packing gland and nut. Drain for maintenance and freeze protection.
Constructed of no lead binary brass alloy. Does not require any additional steps
to solder, as compared to traditional brass valves. Suitable for potable water
applications. Available in sizes and configurations 1/2”- 1”, FNPT x FNPT and
1/2”- 1”, Sweat x Sweat.
• Third party certified no lead ANSI/NSF 61-G, Truesdail.
8
1-800-752-2082
www.legendvalve.com
T-1002ST Forged Brass Full Port Ball Valve with Stainless Steel Ball & Stem
Traditional brass full port ball valve, bottom-loaded blow-out proof stem with
PTFE packing gland and nut. 304 stainless steel ball and stem which are stronger
and ideal for more heavy use, more frequent operation. Available in sizes and
configurations 1/2”- 2”, FNPT x FNPT.
• T-1002ST CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
• T-1002ST ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 2”).
• T-1002ST UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids,
#6 oil at 250 deg. F ( 1/2”- 2”).
• T-1002ST Factory Mutual approved for fire protection service (1/2”- 2”).
T-1002STLD Forged Brass Full Port Ball Valve with Stainless Steel Ball & Stem with Locking Device
PTFE packing gland and nut, 304 stainless steel ball and stem which are stronger
and ideal for more heavy use, more frequent operation. Chrome plated steel
handle with locking mechanism, eyelet for padlock. Available in sizes and
configurations 1/2”- 2”, FNPT x FNPT.
• T-1002STLD CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
• T-1002STLD ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 2”).
• T-1002STLD UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids,
#6 oil at 250 deg. F ( 1/2”- 2”).
• T-1002STLD Factory Mutual approved for fire protection service (1/2”- 2”).
T-1002LD Forged Brass Full Port Ball Valve with Locking Device
PTFE packing gland and nut. Chrome plated steel handle with locking mechanism,
eyelet for padlock. Available in sizes and configurations 1/4”- 2”, FNPT x FNPT.
• T-1002LD CSA Certified for use with natural, manufactured, mixed, liquid
petroleum, and LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/2”- 2”).
• T-1002LD ANSI/ASME B16.33 for use in gas piping systems up to 125 psig
(1/2”- 2”).
• T-1002LD UL Listed 44R8 for LP, natural and manufactured gases; flammable
liquids, #6 oil at 250 deg. F ( 1/2”- 2”).
• T-1002LD Factory Mutual approved for fire protection service (1/2”- 2”).
9
1-800-752-2082
www.legendvalve.com
Full Port Ball Valves
T/s-2000 Ball Valve
The 2000 series ball valve have both a PTFE packing gland with nut and an EPDM O-ring seal stem design. The full port ball valve body, end
adaptor and chrome plated ball are constructed of forged brass. The stem is bottom loaded, thus blow-out proof. The EPDM O-ring stem
and PTFE seats reduce friction when actuating the valve making it easier to turn. The vinyl covered, zinc plated steel handle and nut resists
corrosion. The 2000 series ball valves have a large pattern body for tremendous durability in various residential, commercial and industrial
applications. The 2000 Series valve design is offered in a several configurations and brass alloys for a wide range of uses in potable water and
gas systems. Every valve is pressure tested at the ISO certified manufacturing facility. The T/S-2000NL valve in sizes 1/4”- 1” have a no lead
forged brass ball; whereas, valve sizes 1-1/4”- 4” have a 304 stainless steel ball.
•Saturated Steam (WSP): 150 PSI
•Cold Working Pressure (CWP): 600 PSI (1/4”- 2”); 400 PSI (2-1/2”- 4”).
•Conforms to MSS Standard Practice 110.
•Threaded end connections comply with ANSI/ASME B1.20.1
•Solder end connections comply with ANSI/ASME B16.18
1
2
3
7
4
8
5
9
6
10
1. Zinc Plated Corrosion
Resistant Handle & Nut
2. Forged Brass Packing Nut
3. PTFE Stem Packing
4. EPDM O-ring
5. Forged Brass End Adapter
6. Forged Brass Body
7. Forged Brass Stem
8. Forged Brass Chrome
Plated Ball
9. PTFE Seats
1-800-752-2082
www.legendvalve.com
T/S-2000 Forged Brass Full Port Ball Valve
The T/S-2000 full port ball valve has a larger pattern body suitable for most any application.
The EPDM O-ring and PTFE packing gland stem assures reliable and smoother operation
requiring less torque to operate. The PTFE seats reduce friction thus improving the long life
of the valve. The ball is chrome plated brass. The nickel plated handle is corrosion resistant.
Available in sizes and configurations 1/4”- 4”, FNPT x FNPT and 1/2”- 4”, Sweat x Sweat.
• T-2000 UL Listed 3LZW for LP, natural and manufactured gases; to 250 PSI maximum.
• Factory Mutual approved for fire protection service (1/4”- 2” FNPT x FNPT & 1/2”- 2”
Sweat x Sweat).
T/S-2000NL No Lead Forged Brass Full Port Ball Valve
The T/S-2000NL no lead brass full port ball valve has a larger pattern body
suitable for most any application. Constructed of no lead & DZR binary brass alloy.
Available in sizes and configurations 1/4”- 4”, FNPT x FNPT and 1/2”- 4”, Sweat x
Sweat.
• Third party certified no lead ANSI/ NSF 61-G, UPC/IAPMO
• T-2000NL CSA Certified for use with natural, manufactured, mixed, liquid petroleum, and
• T-2000NL UL Listed 3LZW for LP, natural and manufactured gases; to 250 PSI maximum.
• Factory Mutual approved for fire protection service (1/4”- 2” FNPT x FNPT & 1/2”- 2” Sweat x Sweat).
T/S-2102NL No Lead Forged Brass Full Port Ball Valve with Drain
T/S-2102NL no lead brass full port ball valve with drain is ideal for maintenance
and freeze protection. The EPDM O-ring and PTFE packing gland stem assures
reliable and smoother operation requiring less torque. Constructed of no lead &
DZR binary brass alloy. 1/2”- 1”, FNPT x FNPT and 1/2”- 1”, Sweat x Sweat.
• Third party certified no lead ANSI/NSF 61-G, UPC/IAPMO.
T/S-2001NL No Lead Forged Brass Waterball™ Full Port Ball Valve
The T/S-2001NL is a smaller pattern full port ball valve designed exclusively for
potable water applications in compliance with the no lead law. Constructed of
no lead & DZR binary brass alloy that requires no additional steps to solder as
compared to traditional brass. Available in sizes and configurations 1/2”- 2”, FNPT
x FNPT and 1/2”- 2”, Sweat x Sweat.
• Third party certified no lead ANSI/NSF 61-G, UPC/IAPMO.
11
1-800-752-2082
www.legendvalve.com
PRESS FITTING BALL VALVES
P-200 LegendPress™ Maintenance-Free Ball Valve
The Legend P-200 series of press ball valves features the same reliability you’ve come to expect from the T/S-1001, the preferred ball valve
for thousands of plumbing and heating contractors. The P-200NL No Lead LegendPress™ Ball Valve has the same proven Viton® O-ring stem
design that eliminates the need for a packing gland and nut. LegendPress™ reduces labor and call backs. Compatible with VUS/XL-C profile
jaws. The P-200NL press sockets have greater depth for stabilizing the copper when pressing which assures a solid connection. The press
sockets have two EPDM O-rings for added assurance that a seal is made when pressed. Corrosion resistant Dacromet® coated steel handle,
with vinyl cover. LegendPress™ is available in several configurations: Press x Press, MNPT x Press, FNPT x Press and Union x Press. The P-200
is constructed of UNS C37700 forged brass. The P-200NL is constructed of no lead binary brass. P-200 is compatible with copper ring adapters,
has a single EPDM O-ring and beveled brass socket edge instead of a steel grip ring that could move and interfere with a proper press. (*1/2”2” VUS & 2 1/2”- 4” XLC).
•Saturated Steam (WSP): Not suitable for steam applications.
•Cold Working Pressure (CWP): 600 PSI (1/2” & 3/4”); 500 PSI
(1”- 1-1/4”); 400 PSI (1-1/2”- 3”); 300 PSI (4”).
•Maximum Service Temperature: 230° F
•Threaded end connections comply with ANSI/ASME B1.20.1
1
4
3
2
1.
2.
3.
4.
Copper tube stop inside press socket.
First socket O-ring between the press points.
Second O-ring deeper within the socket.
Press tool witness marks.
1
3
12
2
4
Viton and Teflon are registered trademark of Dupont. Dacromet is a
registered trademark of Dacral. Dyneon TFM is a trademark of 3M.
1-800-752-2082
www.legendvalve.com
P-200 LegendPress™ Press x Press
P-200 LegendPress™ Large Diameter, Press x Press
Forged Brass Full Port Ball Valve
Forged Brass Large Diameter Full Port Ball Valve
Available in sizes and
configurations: 1/2”- 2”, Press
x Press.
Large diameter and deep sockets
for stability. Available in sizes and
configurations: 2-1/2”, 3” & 4”,
Press x Press.
P-200NL LegendPress™ No Lead Press x Press
P-200NL LegendPress™ No Lead Large Diam. Press
No Lead Forged Brass Full Port Ball Valve
Third-party certified ANSI/
NSF 61-G, NSF. Available
in sizes and configurations:
1/2”- 2”, Press x Press.
No Lead Forged Brass Large Diameter
Full Port Ball Valve
Large diameter and deep sockets
for stability. Third-party certified
ANSI/NSF 61-G, NSF. Available in
sizes and configurations: 2-1/2”, 3”
& 4”, Press x Press.
P-200 LegendPress™ with T-handle Press x Press
P-200 LegendPress™ MNPT x Press
configurations: 1/2”- 1-1/4”,
Press x Press. Pre-assembled
extended plastic T-Handle,
with discs: Red (hot), Blue
(cold), and Purple (reclaimed).
configurations: 1/2”- 2”,
MNPT x Press.
P-200 LegendPress™ FNPT x Press
P-200 LegendPress™ Union x Press
configurations: 1/2”- 2”, FNPT
x Press.
configurations: 1/2”- 1-1/4”,
MNPT x Press.
13
1-800-752-2082
www.legendvalve.com
PEX BALL Valves
Legend PEX Maintenance-Free Full Port Ball Valve
Legend has the most expansive offering of compact, durable and labor saving full port PEX ball valves. All Legend PEX ball valves feature
the dual O-ring stem design that requires no packing nut removing the potential for call backs. The valves are constructed of binary brass to
meet all no lead requirements. Three models are configurations based on the T-1001 model which feature dual Viton® O-rings, a corrosion
resistant Dacromet® coated steel handle, and are constructed of no lead binary brass. These include the T-806NL and T-805NL. The T-2005NL,
T-2006NL, T-2007NL, T-2008NL, & T-1960NL are based on the T-2000NL Full Port Ball Valve. These PEX models feature dual EPDM O-rings,
zinc plated steel handle and are constructed of binary brass which are also dezincification resistant. All valves are third party certified no lead
ANSI/NSF 61-G, NSF or IAPMO.
•Cold Working Pressure (CWP): 400 PSI
•PEX barb ends comply with ASTM F1807
•(Model T-1960) PEX barb ends comply with
ASTM F-1960
•ANSI/ASTM B1.20.1 Male iron pipe threads
•ANSI/ASTM B16.18 Sweat
2
1
3
4
7
5
6
14
8
1.
2.
3.
4.
5.
6.
7.
8.
Zinc Plated Steel Nut
Zinc Plated Steel Handle with Vinyl Sleeve
No Lead Forged Brass Stem
Dual EPDM O-rings On Stem
PTFE Seats (2)
No Lead Chrome Plated Forged Brass Ball
No Lead Forged Brass End Adapter
No Lead Forged Brass Body
1-800-752-2082
www.legendvalve.com
T-806NL No Lead Forged Brass PEX x PEX Maintenance-Free Full Port PEX Ball Valve
Maintenance-free dual Viton® O-ring stem seal,
Dacromet® coated steel handle, CWP 400 PSI,
ASTM F1806 PEX Ends. Third party certified no lead
ANSI/NSF 61-G, NSF. Configuration and Sizes: PEX
x PEX, 3/8”- 1”.
T-805NL No Lead Forged Brass Sweat x PEX Maintenance-Free Full Port Ball Valve with Tee Handle
Maintenance-free dual Viton® O-ring stem seal, coated
cast aluminum handle, CWP 400 PSI, ASTM F1806 PEX
Ends. With coated cast aluminum tee handle. Third party
certified no lead ANSI/NSF 61-G, NSF. Configuration and
Sizes: Sweat x PEX, 1/2” & 3/4”.
T-805NL No Lead Forged Brass MNPT x PEX Maintenance-Free Ball Valve with Tee Handle
Maintenance-free dual Viton® O-ring stem seal,
coated cast aluminum handle, CWP 400 PSI, ASTM
F1806. With coated cast aluminum tee handle.
Third party certified no lead ANSI/NSF 61-G, NSF.
Configuration and Sizes: MNPT x PEX, 1/2” & 3/4”.
T-2006NL No Lead & DZR Forged Brass PEX x PEX Full Port Ball Valve
Maintenance-free dual EPDM® O-ring stem seal,
zinc plated steel handle with vinyl cover CWP
400 PSI, ASTM F1806. Third party certified no
lead ANSI/NSF 61-G & ANSI/NSF 14, IAPMO.
Configuration and Sizes: PEX x DZR PEX, 1/2”1-1/4”.
T-1960NL No Lead & DZR Forged Brass PEX x PEX Cold Expansion Full Port Ball Valve
zinc plated steel handle with vinyl sleeve CWP 400
PSI, cold expansion PEX ends, ASTM F 1960. Third
Party certified no lead ANSI/NSF 61-G & ANSI/NSF
14, IAPMO. Configuration and Sizes: PEX x DZR PEX,
1/2”- 1”.
15
1-800-752-2082
www.legendvalve.com
T-2006NL No Lead & DZR Forged Brass PEX x PEX Full Port Ball Valve with Tee Handle
zinc plated steel tee handle, CWP 400 PSI, Third Party
certified no lead ASNI/NSF 61-G & DZR ANSI/NSF 14,
IAPMO. ASTM F1806. Configuration and Sizes: PEX x
PEX, 1/2”- 3/4”.
T-2007NL No Lead & DZR Forged Brass PEX x PEX Drain Full Port Ball Valve with Tee Handle
Maintenance-free dual EPDM® O-ring stem seal, zinc
plated steel tee handle, CWP 400 PSI, with drain. Third
Party certified no lead ANSI/NSF 61-G & DZR ANSI/NSF
14, IAPMO. ASTM F1806. Configuration and Sizes: PEX
x PEX, 1/2”- 1”.
T-2007NL No Lead & DZR Forged Brass Sweat x PEX Full Port Ball Valve with Drain
Maintenance-free dual EPDM® O-ring stem seal, zinc
plated steel handle with vinyl sleeve CWP 400 PSI, with
drain. Third Party certified no lead ANSI/NSF 61-G &
DZR ANSI/NSF 14, IAPMO. ASTM F1806. Configuration
and Sizes: Sweat x PEX, 1/2”- 1”.
T-2005NL No Lead & DZR Forged Brass MNPT x PEX Full Port Ball Valve
zinc plated steel handle with vinyl sleeve. Third Party
certified no lead ANSI/NSF 61-G & DZR ANSI/NSF 14,
IAPMO. CWP 400 PSI. ASTM F1806. Configuration and
Sizes: MNPT x PEX, 1/2”- 1”.
T-2008NL No Lead & DZR Forged Brass PEX x PEX Drop Ear Full Port Ball Valve
zinc plated steel handle with vinyl sleeve and drop
ears. CWP 400 PSI. Third Party certified no lead ANSI/
NSF 61-G & DZR ANSI/NSF 14, IAPMO. ASTM F1806.
Configuration and Sizes: PEX x PEX, 1/2”- 1”.
16
1-800-752-2082
www.legendvalve.com
Push Fit and compression ball valves
Push fit and compression ball valves are labor saving and ideal for repair and maintenance plumbing. Legend Insta-loc II™ push fit ball
valves fit onto copper, PEX and CPVC tubing. The Insta-loc II™ can be removed using the disconnect tool by pushing down on the collar
at the fitting end which releases the stainless steel grip ring. The compression ball valves fit onto copper tubing. These valves are
manufactured in ISO certified facilities, 100% pressure tested. Each model is third party certified no lead ANSI/NSF 61-G, IAMPO or NSF.
P-2200NL Insta-Loc II™ No Lead Forged Brass Push-To-Connect Full Port Ball Valve
Push fit connect ends can be installed onto copper, PEX or CPVC.
Insert stiffeners are included for use with PEX tubing. Configuration
and Sizes: PTC x PTC 1/2”, 3/4”, & 1”. CWP 200 PSI. Third party
certified no lead ANSI/NSF 61-G & DZR ANSI/NSF 14, IAPMO.
ASSE 1061.
P-2200NL Insta-Loc II™ No Lead Forged Brass Drop Ear Ball Valve
The P-2200NL Insta-Loc II™ drop ear ball valve stabilizes onto a
frame or structure. Push fit connect ends can be installed onto
copper, PEX or CPVC. Insert stiffeners are included for use with PEX
tubing. Configuration and Sizes: PTC x PTC 1/2”, 3/4”, & 1”. CWP
200 PSI. Third party certified no lead ANSI/NSF 61-G & DZR ANSI/
NSF 14, IAPMO. ASSE 1061.
P-2200NL Insta-Loc II™ No Lead Forged Brass FNPT x PTC Full Port Ball Valve
Push fit connect ends can be installed onto copper, PEX or CPVC.
Insert stiffeners are included for use with PEX tubing. Configuration
and Sizes: FNPT x PTC 1/2”, 3/4”, & 1”. CWP 200 PSI. Third party
certified no lead ANSI/NSF 61-G & DZR ANSI/NSF 14, IAPMO.
ASSE 1061.
17
1-800-752-2082
www.legendvalve.com
T-1009NL No Lead Forged Brass Compression x Compression Maintenance-Free Full Port Ball Valve
Maintenance-free dual o-ring full port ball valve with
compression ends for convenient installation onto copper
tubing. Constructed of no lead binary brass. Configuration
and Sizes: Compression x Compression, 1/2”, 3/4”, & 1”.
Third party certified no lead ANSI/NSF 61-G, NSF.
T-2009NL No Lead Forged Brass Compression x Compression Full Port Ball Valve
Full port ball valve with compression ends for convenient
installation onto copper tubing. Constructed of no lead binary
brass. Configuration and Sizes: Compression x Compression,
1/2”, 3/4”, & 1”. Third party certified no lead ANSI/NSF 61-G,
IAPMO.
T-2002NL No Lead Forged Brass Compression x Compression Full Port Ball Valve with Drain
Full port ball valve with drain and compression ends for
convenient installation onto copper tubing. Constructed of
no lead binary brass. Configuration and Sizes: Compression
x Compression 1/2”, 3/4”, & 1”. Third party certified no
lead ANSI/NSF 61-G, IAPMO.
18
1-800-752-2082
www.legendvalve.com
Specialty ball valves
The following Legend ball valves models are designed for special applications; such as, the simpler and labor saving connecting of piping
systems to boilers and tankless water heaters. Select models are constructed of no lead brass alloy for applications within a potable water
system. These valves are manufactured in ISO certified facilities, 100% pressure tested. The no lead ball valves are third party certified.
T-1002CC Forged Brass Full Port Ball Valve with Cap & Chain
Traditional forged brass full port ball valve, 3/4” FNPT x 3/4” GHT.
Garden hose includes GHT cap with gasket and tethered to valve end.
*Capped GHT connection is rated 125 PSI.
• Saturated Steam (WSP): not recommended for steam applications.
• Cold Working Pressure (CWP): 600 PSI*
• Garden hose end connections comply with ANSI/ASME B1.20.7
T-2100 Forged Brass Full Port Three-Way Ball Valve
Traditional forged brass full port ball valve diverts media to the side-leg
connection from either run connection. Directional arrow on handle
indicates flowpath. Configurations and Sizes: FNPT x FNPT x FNPT,
1/4”- 2”.
• Cold Working Pressure (CWP): 600 PSI
T-2000MxSNL No Lead Forged Brass Full Port Ball Valve, MNPT x Sweat
No lead forged brass full port ball valve for transitioning from a
tank or boiler directly to copper tube. Configuration and Size:
MNPT x Sweat, 3/4” x 3/4”.
• Sweat end connections comply with ANSI/ASME B16.18
• Third party certified no lead ANSI/NSF 61-G, IAPMO.
19
1-800-752-2082
www.legendvalve.com
T-1007 Forged Brass Full Port Ball Valve FNPT x Sweat - Connection to Boilers
Traditional forged brass full port ball valve for connecting boilers to
copper tube. Configurations and Sizes: FNPT x Sweat, 1/2”- 1”.
No Lead Forged Brass Tankless Water Heater Valve Kits
Hot and cold water heater isolation valves and pressure relief valve. No lead
brass full port ball valves, include 150 PSI pressure relief valve. Tethered cap
on tool activated drain valves integral in body of each valve, hot and cold.
Configuration and Size: FNPT (Captive Union) X FNPT, Sweat (Captive Union) X
Sweat, 3/4” x 3/4”, & 1” x 1”.
• Saturated Steam (WSP): not recommended for steam applications.
• PRV ASME listed, ANSI Z21.22 / CSA 4.4: CSA rated to 200,000 BTU/HR.
• ASME rated 150 PSI and 500,000 BTU/HR.
• Select models include 150 PSI , 2.7 million BTU/hr PRV
• Third party certified, IAPMO, ANSI/NSF 61-G.
ISOLATION FLANGED BALL VALVES
Legend isolation ball valves permit circulation pump removal without draining the complete system. The standard diamond-shaped flange
connects to the circulation pump with two bolts and nuts, which are included with each valve. These valves are manufactured in ISO certified
facilities, 100% pressure tested. Each isolation ball valve is individually boxed.
T/S -1002FLG Forged Brass Isolation Full Port Ball Valve - Flanged
Traditional forged brass full port ball valve with flanged end for
isolating circulator pumps. Configuration and Size: FNPT x Flange,
Sweat x Flange, and 3/4”, 1” and 1-1/4”.
• Threaded end connections comply with ANSI ASME B1.20.1
20
1-800-752-2082
www.legendvalve.com
T/S-2011RFLG Forged Brass Isolation Full Port Ball Valve - Rotating Flange
Traditional forged brass full port ball valve with flanged end for isolating
circulator pumps. Standard flange connection rotates for positioning
valve. Mounting holes are elongated to fit high velocity pumps.
Configuration and Size: FNPT x Flange, Sweat x Flange, and 3/4”, 1”
and 1-1/4”.
• Saturated Steam (WSP): Not recommended for steam service.
T/S-2012RFLG Forged Brass Isolation Full Port Ball Valve - Rotating Flange & Purge
Traditional forged brass full port ball valve with flanged end and integrated
drain valve for isolating circulator pumps. Standard flange connection
rotates for positioning valve. Mounting holes are elongated to fit high
velocity pumps. 1/4- turn tool activated drain valve with 3/4” GHT end and
tethered brass cap. Configuration and Size: FNPT x Flange, Sweat x Flange,
and 3/4”, 1” and 1-1/4”.
P-2011 LegendPress™ Forged Brass Isolation Full Port Ball Valve
LegendPress™ press fitting end traditional forged brass full port ball
valve with flanged end connection for isolating circulator pumps.
Mounting holes are elongated to fit high velocity pumps. Standard flange
connection rotates for positioning valve. Configuration and Size: Press
Fitting x Flange, 3/4”, 1” and 1-1/4”.
21
1-800-752-2082
www.legendvalve.com
Industrial full port ball valves
Legend offers industrial ball valves for potable and non-potable water systems, process piping and pneumatics, including the T/S-1004 Cubic
Ball Valve. The T/S-1004 features a chrome plated forged brass cubic ball that has less surface area in contact with the seats. This minimizes
the friction between the ball and seats, reducing the operational torque to actuate by 20% and increases the seat life by 50%. The select
Legend industrial ball valves suitable for potable water systems are constructed of either no lead forging or casting brass. These valves are
manufactured in ISO certified facilities, 100% pressure tested. Each no lead model is third party certified.
T/S-1004 Forged Brass Full Port Cubic Ball Valve
Forged body and end adapters are oversized. Large body with large
wrench flats. Available in sizes and configurations 1/2”- 4”, FNPT x FNPT
and 1/2”- 3” Sweat x Sweat.
• T-1004 CSA Certified for use with natural, manufactured, mixed, liquid petroleum, and
• T-1004 UL Listed 44R8 for LP, natural and manufactured gases; flammable liquids, #6
oil at 250° F (1/2”- 2”).
• T-1004 UL Listed 757X for fire protection service (1/2”- 2”).
T/S-1004NL No Lead Forged Brass Full Port Cubic Ball Valve
Constructed of no lead binary brass. Available in sizes and configurations
1/2”- 2”, FNPT x FNPT and 1/2”- 2” Sweat x Sweat.
• Third party certified no lead, ANSI/NSF 61-G, NSF
• T-1004NL CSA Certified for use with natural, manufactured, mixed, liquid
petroleum, and LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/4”, 1/2”- 2”).
• T-1004NL ANSI/ASME B16.33 for use in gas piping systems up to 125 psig
(1/2”- 1”).
T/S-901 Cast Bronze Full Port Ball Valve
Dezincification resistant bronze, heavy pattern body. Blow-out
proof stem, PTFE seats and packing gland. Available in sizes and
• Conforms to MSS Standard Practice 110
22
1-800-752-2082
www.legendvalve.com
T/S-901NL No Lead Cast Bronze Full Port Ball Valve
No lead, dezincification resistant bronze, heavy pattern body. Blow-out proof
stem, PTFE seats and packing gland. Available in sizes and configurations
1/2”- 3”, FNPT x FNPT and 1/2”- 2”, Sweat x Sweat.
• Third party certified no lead, ANSI/NSF 61-G, NSF
T-1500 Three Piece Cast Bronze Full Port Ball Valve
Large pattern three-piece cast bronze body and end adapters. Blow-out proof,
forged brass stem. Chrome plated cast brass ball. PTFE seats (2), end adapter
seals (2), stem seal, and stem packing. Packing nut is forged brass. Chrome
plated steel handle with vinyl sleeve. AISI 304 stainless steel bolts, split
washers and nuts (4 each).
Mini-BAll Valves
Mini-ball valves are commonly used to isolate gauges and as testing ports in a potable water piping system. They are also used in process
piping systems for a variety of applications. Legend mini-ball valves are constructed of both traditional and no lead brass/bronze alloys to
accommodate the many types of applications. Several models are also certified for use in gas piping systems. These valves are manufactured in
ISO certified facilities, 100% pressure tested.
T-900MxF Forged Brass Large Port Ball Valve
Traditional forged brass mini-ball valve, with Dacromet® coated steel
handle has vinyl sleeve. Configurations and Sizes: MNPT x FNPT, 1/8”- 1”.
• Cold Working Pressure (CWP): 600 PSI (1/8”- 3/4”); 500 PSI (1”)
• CSA Certified for use with natural, manufactured, mixed, liquid petroleum,
and LP gas/air mixtures: ASME B16.44 up to 5 PSI, (1/2”- 1”).
• UL Listed 757X fire protection service, (1/2”- 1”).
23
1-800-752-2082
www.legendvalve.com
T-900MxFNL No Lead Forged Brass Large Port Ball Valve
No lead forged brass mini-ball valve, with Dacromet® coated steel
handle has vinyl cover. Configurations and Sizes: MNPT x FNPT, 1/8”- 1”.
• Cold Working Pressure (CWP): 600 PSI (1/8”- 3/4”); 500 PSI (1”).
T-900MxF-T Forged Brass Large Port Ball Valve with T-Handle
Traditional forged brass mini-ball valve, with cast aluminum tee
handle. Configurations and Sizes: MNPT x FNPT, 1/8”- 1”.
• UL Listed 757X fire protection service, (1/2”- 1”).
T-900MxF-TNL No Lead Forged Brass Large Port Ball Valve with T-Handle
No lead forged brass mini-ball valve, with cast aluminum tee handle.
Configurations and Sizes: MNPT x FNPT, 1/8”- 1”.
• Threaded end connections comply with ANSI / ASME B1.20.1
and LP gas/air mixtures: ASME B16.44 up to 5 PSI.
T-810 Forged Brass Micro Ball™ Valve
Traditional forged brass, compact body, mini-ball valve with Dacromet®
coated steel handle, vinyl cover. Configurations and Sizes: FNPT x FNPT,
1/8”- 1/4”.
24
1-800-752-2082
www.legendvalve.com
T-800T Forged Brass Micro Ball™ Valve with Tee Handle
Traditional forged brass, compact body, mini-ball valve with cast
aluminum tee handle. Configurations and Sizes: FNPT x FNPT, 1/8” &
1/4”.
T-800TNL No Lead Forged Brass Micro Ball™ Valve with Tee Handle
No lead forged brass, compact body, mini-ball valve with cast aluminum
tee handle. Configurations and Sizes: FNPT x FNPT, 1/8” & 1/4”.
T-801NL No Lead Cast Brass Ball Valve Test Cocks
No lead cast brass test cock ball valve, with screwdriver slot stem for
actuation. Configurations and Sizes: FNPT x MNPT,( 1/4” x 1/8”) & (1/4”x
1/4”).
25
1-800-752-2082
www.legendvalve.com
Ball Valve Accessories
Locking Device (lever handle valves only)
Memory Stop
Dacromet® coated steel for
corrosion resistance, locking
device. Fits 1/4”- 3”.
Accessory for models 1001, 1004, 1100, 1009, 900, 805,
806, 537L, P-200.
Stem Extension
806, 540, 537, P-200.
Extension T-Handle
Forged brass stem
extension. Fits 1/4”- 4”.
806, 540, 537, P-200.
T-Handle
Plastic extension handle.
Fits 3/8”- 2”.
806, 540, 537, P-200.
Stainless Steel Handle & Nut for T/S-1002
Coated aluminum tee
handle that is non-corrosive,
lightweight and compact in
size. Fits 1/8”- 1-1/4”.
806, 540, 537, P-200.
Stainless Steel Handle & Nut for T/S-2000
AISI 304 stainless
steel handle and nut.
Accessory for models 2000, 2002, 2005, 2006, 2007,
2008, 2009, 2011, 2012.
26
Steel memory stop.
Fits 1/4”- 2”.
AISI 304 stainless
steel handle and nut.
Accessory for models 1002, 901,1102.
1-800-752-2082
www.legendvalve.com
Stainless / carbon steel Ball valves
Legend stainless steel and carbon steel ball valves are made using investment casting, which results in less porous and smoother finished
castings with greater integrity. Moreover, the manufacturing facility is ISO Certified, using automation and comprehensive TQM processes.
Applications for the valves include process piping, pneumatics and hydraulics.
All ball valves conform to MSS Standard Practice 110. All ball valve seats, end adapter seals and packing are PTFE, with exception of T-730,
T-725, and T-715 which have graphite impregnated seats. Pressure ratings vary from model to model. All ball valves except model T-720 have
304 stainless steel latch lock handles.
• ANSI/ASME B1.20.1: Threaded end connections.
• MSS SP-110: All models comply.
• ASTM A351 CF8M: Investment cast stainless steel
body, end adapters, and ball for sizes 1/2”- 2”.
• ASTM A276: 316 stainless steel ball for 1/4”- 1/2”.
• AISI 304: Stainless steel handle, locking mechanisms,
packing nut, bolts and nuts.
T-720 Carbon Steel One-Piece Ball Valve
Heavy-duty one-piece carbon steel barstock body. Bottom-loaded
blowout-proof stem, 304 stainless steel handle & nut, stem and ball.
Ideal for commercial or industrial applications where port size is not
critical. Available in sizes and configurations 1/4”- 2”, FNPT x FNPT.
• Cold Working Pressure (CWP): 2000 PSI (1/4”- 1”); 1500 PSI (1-1/4”- 2”).
• Naturally lead free.
27
1-800-752-2082
www.legendvalve.com
T-725 Carbon Steel Large Port Ball Valve
Heavy-duty two-piece carbon steel investment cast body and end
adaptor. Bottom-loaded blowout-proof stem, 316 stainless steel
ball and stem, 304 stainless steel latch-lock handle and trim. Fiber
reinforced graphite impregnated seats maintain their shape in high
pressure service. Integral, tapped mounting pad for actuation or panel
attachment. Ideal for commercial or industrial applications. Available in
sizes & configurations: 1/4”- 2”, FNPT x FNPT.
T-730 Carbon Steel Full Port Ball Valve
Heavy-duty two-piece carbon steel investment cast body design
Bottom-loaded blowout-proof stem, 316 stainless steel ball and stem,
304 stainless steel latch-lock handle and trim. Fiber reinforced graphite
impregnated seats maintain their shape in high pressure service.
Integral, tapped mounting pad for actuation or panel attachment.
Ideal for commercial or industrial applications. Available in sizes &
configurations: 1/4”- 2”, FNPT x FNPT.
• Cold Working Pressure (CWP): 2000 PSI (1/4” - 1”); 1500 PSI (1-1/4”- 2”).
T-710 316 Stainless Steel One-Piece Ball Valve
Compact, one-piece investment cast body design, 316 stainless steel
body & end adaptor. Bottom-loaded blowout-proof stem, 316 stainless
steel stem and ball. Equipped with a latch-lock handle (except 1/8”
size), 304 stainless steel trim. Ideal for commercial or industrial
applications where port size is not critical. Available in sizes &
28
1-800-752-2082
www.legendvalve.com
T-715 316 Stainless Steel Large Port Ball Valve
Heavy-duty two-piece investment cast body design, 316 stainless steel
body & end adaptor. Bottom-loaded blowout-proof stem. Equipped with a
latch-lock handle, 304 stainless steel trim, 316 stainless steel stem and
ball. Ideal for commercial and industrial applications. Fiber reinforced,
graphite impregnated seats maintain their shape in high pressure
service. Integral, tapped mounting pad for actuation or panel attachment.
Available in sizes & configurations: 1/4”- 2”, FNPT x FNPT.
T-712 316 Stainless Steel Full Port Ball Valve
Heavy-duty two-piece investment cast body design, 316 stainless steel
body & end adaptor. Bottom-loaded blowout-proof stem. Equipped
with a latch-lock handle, 304 stainless steel trim, 316 stainless
steel stem and ball. Ideal for commercial and industrial applications.
Integral, tapped mounting pad for actuation or panel attachment. Sizes
2-1/2”- 4” are equipped with dual mounting pads. Available in sizes &
• Cold working pressure (CWP): 1000 PSI
T-717 316 Stainless Steel 3-Piece Full Port Ball Valve
Heavy-duty three-piece investment cast body design, 316 stainless
steel body & adaptors. Bottom-loaded blowout-proof stem. Equipped
with a latch-lock handle, 304 stainless steel trim, 316 stainless steel
stem and ball. Ideal for commercial and industrial applications. The
body center section lifts or swings out to permit servicing without end
adapter removal. Available in sizes & configurations: 1/4”- 2”, FNPT x
FNPT.
29
1-800-752-2082
www.legendvalve.com
T-710T Stainless Steel Mini-Ball Valve
One-piece cast 316 stainless steel body, 304 stainless steel
T-handle. 316 stainless steel stem and ball. Available in 1/4”
FNPT x FNPT.
T-710MxF-T Stainless Steel Mini-Ball Valve
One-piece cast 316 stainless steel body, 304 stainless steel
T-handle. Available in 1/4” MNPT x FNPT.
30
1-800-752-2082
www.legendvalve.com
Gas Ball Valves
T-3000 Series One-Piece Gas Ball Valve
Patented one-piece forged brass body eliminates the possibility of seam leaks that may occur to two-piece body designs. Top loaded chrome
plated brass ball. Gas ball valves are ideal for all residential and commercial gas installations. The chrome plated ball and nitrile rubber seats
resist contamination building up and offer a positive seal in low or moderate pressure gas applications. With a quarter-turn, ball-type, forged
brass design, it is more compact and superior to traditional cast bronze or cast iron gas cocks. The 175 PSI pressure rating permits highpressure air tests without the grease-seal, blowout common to plug-type gas cocks. Available in eight different configurations to meet most gas
connection applications. All gas ball valves are manufactured in a ISO certified facility, 100% pressure tested.
CSA Certified for use with natural, manufactured or mixed liquefied petroleum and LP gas/air mixtures:
• ANSI standard Z21.15 for use as a gas appliance connector valve for 1/2 lb. systems.
• CSA Certified 3-88 for use in 2 or 5 lb. house piping systems.
• Threaded end connections conform to ANSI/ASME B1.20.1
• Not suitable for steam service.
Massachusetts Commonwealth approved (Model T-3001). UL Listed 757X for the sizes 1/2” and 3/4” within the following categories:
• YQNZ.MH19347 Compressed Gas Shutoff Valves.
• YRBX.MH19347 Flammable Liquid Shutoff Valves.
• YRPV.MH19347 Gas Shutoff Valves.
• MHKZ.MH19347 Manual Valves.
• VQGU.EX4196 Valves, Trim and Drain.
T-3000 Blue Top One-Piece Gas
Forged Brass Ball Valve
FNPT x FNPT (3/8”, 1/2” & 3/4”)
T-3000 Blue Top One-Piece
Forged Brass Gas Ball Valve
Flare x FNPT (3/8” x 1/2”, 1/2”,
1/2” x 3/4”, 5/8” (15/16-16) x
1/2”, 5/8” (7/8-14) x 3/4”, 5/8”
(15/16-16) x 3/4”)
Flare x Flare (3/8”, 1/2”& 5/8”)
Flare x MNPT (3/8”x 1/2” & 1/2”)
31
1-800-752-2082
www.legendvalve.com
FNPT x Texas Pattern (1/2” x
1/8”& 3/4” x 1/8”)
T-3001 Blue Top One-Piece Forged
Brass Gas Ball Valve with T-Handle
FNPT x FNPT (3/8”- 2”)
T-3100 Blue Top One-Piece Forged Brass
Gas Valve with Sidetap For Testing
FNPT x FNPT (1/2”- 1”)
T-3100 Blue Top One-Piece Forged
Brass Gas Valve with Sidetap
Flare x Flare (3/8” & 1/2”)
T-3002 Flat Head One-Piece
Forged Brass Gas Valve Flathead
FNPT x FNPT (1/2” & 3/4”)
T-3005 Red Top™ Economy Gas Ball Valve
• Two-piece designed forged brass gas valve with coated zinc-aluminum cast handle. Manufactured in a
ISO certified facility.
• CSA Certified for use with natural, manufactured or mixed liquified petroleum and LP gas/air mixtures:
ANSI standard Z21.15 for use as a gas appliance connector valve for 1/2 lb. systems.
CSA Certified 3-88 for use in 2 or 5 lb. house piping systems.
• UL Listed for the sizes 1/2” and 3/4”:
YRPV.MH15973 gas shutoff valves
MHKZ.MH15973 manual valves
VQGU.MH15973 valves, trim and drain
Massachusetts Commonwealth approved
• Threaded end connections conform to ANSI/ASME B1.20.1
• Saturated Steam (WSP): not suitable for steam service.
FNPT x FNPT (1/2”, 3/4” & 1”)
32
1-800-752-2082
www.legendvalve.com
LOW PRESSURE Ball VALVES
Legend quarter-turn low pressure ball valves are configured to replace traditional globe style plumbing valves used in low pressure water
systems. These hose end ball valves are available in both traditional and no lead brass alloys. Compared to multi-turn low pressure valves,
ball valves have far greater flow characteristics, are more compact for tight spaces and have easy quarter turn actuation. All quarter turn low
pressure are manufactured in a ISO certified facility, 100% pressure tested.
• Saturated Steam (WSP): not suitable for steam service.
• CSA certified for Canadian plumbing applications.
• NL versions are third party certified, ANSI/NSF 61-G, NSF.
Boiler Drain
Forged brass one-piece body, chrome plated forged brass ball with cast aluminum handle. Smaller pattern ball valve. The ball valve has greater
flow than traditional low pressure valves. No lead boiler drain valves are forged using binary brass. Configurations and Sizes: MNPT (1/2” is
also Sweat) and FNPT in 1/2” & 3/4”.
R-670 Boiler Drain Forged
Brass Ball Valve
MNPT x MGHT
R-670NL No Lead Boiler Drain
MNPT x MGHT
R-672 Boiler Drain
FNPT x MGHT
R-672NL No Lead Boiler Drain
FNPT x MGHT
33
1-800-752-2082
www.legendvalve.com
Hose Bibb
Forged brass two-piece body, chrome plated forged brass ball, and cast aluminum tee handle or Dacromet® coated steel handle. A ball valve
has greater flow than traditional low pressure valves. No lead boiler hose bibbs are forged using binary brass. T-536 is one-piece forged brass
body. Configurations and Sizes: MNPT (1/2” is also Sweat) and FNPT in 1/2”, 3/4”.
T-537 Forged Brass Ball Valve
Hose Bibb with T Handle
T-537NL No Lead Forged Brass Ball
Valve Hose Bibb with T Handle
T-537L Forged Brass Ball
Valve Hose Bibb with
Lever Handle
T-540 Water Heater Drain Valve
with Lever Handle
T-540NL No Lead Water Heater Drain
Valve Forged Brass Ball Valve
with Lever Handle
T-536 Compact Forged Brass
Ball Valve Hose Bibb with
Lever Handle
T-537LNL No Lead Forged
Brass Ball Valve Hose Bibb
with Lever Handle
No Kink Hose Bibb
Forged brass one-piece body, chrome plated forged brass ball with cast aluminum handle. Smaller pattern ball valve has greater flow than
traditional low pressure valves. No lead boiler hose bibbs are forged using binary brass. Configurations and Sizes: MNPT (1/2” model is a
combination of 1/2” MNPT and 1/2” Sweat), in 1/2” & 3/4”.
R-671 Hose Bibb Forged Brass
No Kink Ball Valve
34
R-671NL No Lead Hose Bibb
Forged Brass No Kink Ball Valve
1-800-752-2082
www.legendvalve.com
Sillcock
Forged brass one-piece body, chrome plated forged brass ball with cast aluminum handle. Smaller pattern ball valve. Ball valve has greater flow
than traditional low pressure valves. (T/S-541FLG is two-piece forged body with lever handle). No lead sillcocks are forged using binary brass.
Configurations and Sizes: FNPT & Sweat in 1/2”& 3/4”.
R-673 Sillcock Forged Brass
Ball Valve
FNPT x MGHT
R-673NL No Lead Sillcock
FNPT x MGHT
R-674 Sillcock Forged
Brass Ball Valve
Sweat x MGHT
R-674NL No Lead Sillcock
Sweat x MGHT
T-541FLG Flanged Sillcock
Forged Brass
Sweat x MGHT
Did you know?
• Legend does not have a minimum order.
• Legend ships every order in 24 hours, guaranteed or you get 5% off the order.
• Legend ships every order complete or you get 5% off the backorder.
• Legend guarantees error-free transactions or you get 5% off the error.
• Legend allows you to return non-obsolete materials without a restocking charge.
• Legend guarantees our products for 5 years or $25.00 back.
This legendary performance can result in as many as three to four more additional
inventory turns annually, significantly increasing your I.R.O.I.!
35
1-800-752-2082
www.legendvalve.com
300 N. Opdyke Rd.
Auburn Hills, MI 48326
phone: (800) 752-2082
fax: (800) 835-4457
web: www.legendvalve.com
email: [email protected]
© 2015 Legend Valve & Fitting, Inc.
36
LT-BV
LT-BV

Ball Valves - Legend Valve

Transcription

Similar documents

Water Softeners Bimatic Series

Saturday 22nd September 2012

Ball Up Sports Flyer - Holland Junior School

Throw a ball up and it will fall down 1) The force of gravity pulls the

Series 50

Kerotest AGA11 Brochure.indd - Precision Pipeline Equipment, Inc.

PV0003 Data Sheet

The Murzan PI 50 Sanitary Pump Gently Handles the Widest Range

LET US Play - Lines.cdr

View Dr van Niekerk`s presentation