Catalog: Hay Tool Parts - Teeth:Baler,Harrow Rake, Tedder, ETC

Transcription

Catalog: Hay Tool Parts - Teeth:Baler,Harrow Rake, Tedder, ETC
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
Allis-Chalmers
A-531727
Rake Tooth
DIM A 7”
DIM B 3.750”
DIM A 7”
Rake Tooth
A 15.00”
B 10.5”
C 6.75”
Befco: (RAKE: SEVERAL)
Rake Tooth
DIM B 3.375”
A-BE2TT
Tedder Tooth
DIM A 15.75”
DIM B 3.10”
DIM C 2.250”
Allis-Chalmers: (RAKE: SEVERAL)
A-70511506
A-BE1RT
DIM C 2.250”
Allis-Chalmers: (RAKE: SEVERAL)
A-539754
Befco
DIM C 2.80”
Befco: (HAY TEDDER: SEVERAL)
Rake Tooth
Brady
A 7.750”
B 1.875”
Atlas
Rake Tooth
A 15”
B 11.5”
Spring Harrow Tooth
A 10.750”
B 7.000”
C 4.000”
Allis-Chalmers:
A-203055
A-0006907
C 2.750”
Brady: (HARROW: SEVERAL)
C 6.5”
Atlas: (RAKE: SEVERAL)
54
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
TEETH
BALER, HARROW, RAKE, TEDDER, ETC.
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
Case-IH
A-455165R1
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A 7.75”
DIM A 6.750”
B 3.625”
C 1.812”
A 6.25”
B 2.75”
C 1.375”
Case-IH: (SQUARE BALER: 428, 435, 445, 5420)
A-626742R1
Baler Tooth
A 4.125”
B 4.375”
Rake Tooth
DIM B 4.00”
DIM C 2.25”
Case-IH: (RAKE: (11, 15 ALL 1956>), 14, 16, 3, 30, 35, 4, 5, 8, 86, 9,
96, 97)
A-MA74528
Baler Tooth
Rake Tooth
Case-IH: (RAKE: 5 1952>)
A-462978R1
A-210614C1
Case-IH: (ROUND BALER: 2400)
A-ZA103012
Baler Tooth
A 5.750”
B 2.625”
Baler Tooth
C 1.5”
Case-IH: (ROUND BALER: 3650)
A 6.125”
B 4”
C 1.625”
A-R15080
Rake Tooth
A 8.5”
B 3.5”
Case-IH: (SQUARE BALER: 27, 37, 45, 46, 47, 55, 56, 57, 60, 70, 71,
420, 430, 440), (FORAGE HARVESTER: 15, 16, 55, 350, 550, 650)
A-R740S
Rake Tooth
Case-IH: (RAKE: SEVERAL)
A 7.50”
B 4.125”
A-10670P
Rake Tooth
A 6.10”
B 4.20”
C 2.50”
Case-IH: (RAKE: 169, (170, F170 ALL 1939 & Up))
A-R1044S
Rake Tooth
C 1.59”
Case-IH: (RAKE: SEVERAL)
A 7.250”
B 1.562”
A-96HE2
Rake Tooth
A 6.000”
B 3.500”
C 2.500”
Case-IH: (RAKE: 200 1953>)
A-T17350
Rake Tooth
C 1.875”
Case-IH: ((Undefined): SEVERAL Mfg By Hesston Same)
A 7.125”
B 3.75”
C 2.187”
Case-IH: (RAKE: 281 1960->)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
55
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-540565R1
A 7.125”
Rake/Tedder Tooth
B 3.750”
C 1.875”
A 6.00”
B 7.50”
C 2.750
D 1.830” Spring I.D.
C 1.535”
A-9023442
Tedder Tooth (LH)
A 14.960”
B 3.858”
C 1.650”
Claas: (HAY TEDDER: VOLTO 450, VOLTO 540, VOLTO 640, VOLTO 740,
W360, W400, W540, W600, W730, WA360, WA400, WA540, WA600,
WA730)
A-9024820
Tedder Tooth (RH)
A 15.280”
B 15.870”
Tine, Double
B 2.50”
C 1.50”
Case-IH: (SQUARE BALER: 4600, 8540)
A-700714826
B 3.312”
Spring Harrow Tooth
Case-IH: (DISC HARROW: 310 Diskall Mulcher), (MULCHER: 4200
Combo-Mulch Finisher, IH MULCHER ATTACHMENTS)
A-8045981
A 18.750”
C 3.780”
D 1.575”
Claas: (HAY TEDDER: W360, W450, W540, WA360, WA450, WA540)
A-9024830
Tedder Tooth (LH)
A 15.870”
B 15.275”
Tine, Double
C 3.780”
D 1.575”
Claas: (HAY TEDDER: W360, W450, W540, W600S, W730S, WA360,
WA450, WA540)
A 5.125”
B 2.375”
C 1.900”
A-CL9182380Z
Pick-Up Tine
A 2-11/16”
B 1-1/2”
Case-IH: (ROUND BALER: 8435), (SQUARE BALER: 8575)
A-7895642
Tine, Double
C 7-3/8”
Claas:
Crustbuster
A 2.75”
B 1.937”
A-501544
Tine
DIM A 10.00”
DIM B 3.625”
C 7”
Case-IH: (AUGER HEADER: 8840)
Claas
A-9029160
Tedder Tooth
DIM C 2.00”
Crustbuster: (SEVERAL: HARROW)
Darf
A 21.000”
B 3.540”
A-L10503
Rake Tooth
A 7.250”
B 1.687”
C 1.575”
Claas: (HAY TEDDER: ANDEX 280, ANDEX 310, WSDS310, WSDS370)
Darf: (RAKE: SEVERAL)
56
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A 15.00”
Tedder Tooth
Claas: (HAY TEDDER: WS280, WS310, WSDS280, WSDS310)
Case-IH: (MOWER CONDITIONER: 1190, 1490, 1590, 990)
A-814800C1
A-9020830
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-1104000150110 Tedder Tooth
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
David Bradley
A-DB1
Tooth
A 6.75”
B 3.687”
A 13.150”
C 2.437”
A-6580456
Deutz
Rake Tooth
B 2.875”
Fahr
A-11043030107
Tedder Tooth
A 14.875”
B 1.625”
Tooth Mounting Hardware Kit
C 2.625”
Fahr: (HAY TEDDER: KH4S, KH20, KH40, KH60, KH300DN, KH400,
KH500DN, KH600N)
Fahr: (HAY TEDDER: APOLLO, KU250DN, KV3500, SEVERAL)
A-06565744
DIM C 1.625”
Fahr: (HAY TEDDER: KH2.76DN, KH20, KH300DN, KH40, KH400DN,
KH45DN, KH500DN, KH60, KH600DN, KH700DN, KH2.36DN,
KH2.44DN, KH2.52DN)
C 2.250”
Deutz:
A-06581529K
D 1.375”
Tedder Tooth
DIM A 14.875” DIM B 3.750”
A 19.000”
C 4.134”
Fahr: (HAY TEDDER: KH2N, KH4N, KH6N)
David Bradley: (RAKE: SEVERAL)
A-6502131
B 14.567”
Tooth Mounting Hardware Kit
A-16504333
Tedder Tooth
A 24.800”
B 3.88”
Note: Used w/ 06565574.
Fahr: (HAY TEDDER: SEVERAL)
A-16502741
A 15.156”
Rotary Rake Tine (LH)
B 16.140”
C 1.575”
Fahr: (HAY TEDDER: KS1.30, KS2.29, KS2.33), (RAKE: KS1.30DN,
KS1.50DN), (RAKE: KS1.70DN)
C 3.625”
A-16504331
Tedder Tooth
A 24.800”
B 2.952”
D 1.614”
Fahr: (HAY TEDDER: APOLLO, KU250DN, KV3500)
A-16502742
Rotary Rake Tine (RH)
C 1.575”
D 3.88”
Fahr: (HAY TEDDER: KS1.50, KS1.70, KS2.37, KS2.42, KS2.60), (RAKE:
KS1.30DN, KS1.50DN), (RAKE: KS1.70DN)
A 16.140”
B 15.156”
C 3.625”
A-06231509
Tedder Tooth
A 19.000”
B 2.875”
D 1.614”
Fahr: (HAY TEDDER: APOLLO, KU250DN, KV3500)
A-1104000150010 Tedder Tooth
C 2.250”
Fahr: (HAY TEDDER: KS200, KS85DN, KS90DN)
A 14.567”
B 13.150”
C 4.134”
D 1.375”
Fahr: (HAY TEDDER: KH2N, KH4N, KH6N)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
57
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-1103663011300 Tedder Tooth
A 17.520”
Farmhand
B 3.425”
C 1.575”
A-400341
Rake Tooth
A 5.250”
B 4.5”
D 3.190”
Fahr: (HAY TEDDER: KS80DN)
A-06565574
Tedder Tooth
C 1.875”
A 14.760”
B 3.780”
A-96FH2L
Rake Tooth, LH
A 5.250”
B 4.5”
C 1.650”
Fahr: (HAY TEDDER: SEVERAL)
A-04303010700 Rake/Tedder Tooth
C 1.875”
Farmhand: (RAKE: LR5, LR6, M5, M6, 3P black RH)
A 12.750”
A-L2117R
Rake Tooth, RH
A 5.25”
B 4.5”
B 2.250”
Fahr: (HAY TEDDER: SEVERAL), (RAKE: SEVERAL)
Farendlose
A-66230000
Tedder Tooth
C 1.845”
Farmhand: (RAKE: 76)
Fella
A 14.570”
B 13.976
C 1.968”
A-461110
Rake Tooth
A 15.350”
B 13.780”
D 4.291”
Farendlose: (HAY TEDDER: RW330C)
A-66231000
Tedder Tooth
C 4.840”
D 1.535”
Fella: (HAY TEDDER: TH2, TH20, TH40)
DIM A 14.570” DIM B 13.976” DIM C 1.968”
A-461111
Rake Tooth
A 13.780”
B 15.350”
DIM D 4.291”
Farendlose: (HAY TEDDER: RW330C)
C 1.535”
D 4.84”
Fella: (HAY TEDDER: TH2, TH20, TH40)
A-460182
Rake Tooth (LH)
A 14.570”
B 13.975”
C 1.570”
D 4.050”
Fella: (HAY TEDDER: TH330, TH380, TH4, TH460, TH6)
58
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Farmhand: (RAKE: F-76)
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-488072
Tedder Tooth
A-487380K
A 13.15”
B 3.75”
Fella: (HAY TEDDER: (TH360, TH370 ALL Used w/ 488072 Teeth),
TH410 Used w/ 487922 Teeth, TH410 Used w/ 488072 Teeth, TH430
Used W/ 487922 Teeth, (TH430, TH440 ALL Used w/ 488072 Teeth),
(TH450H, TH520, TH540, TH680, TH700, TH800 ALL Used w/ 487922
Teeth))
Fella: (HAY TEDDER: TH360, TH370, TH410, TH430, TH440)
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-487922
Tedder Tooth
A-487166K
A 13.25”
A 22.440”
A 17.370”
B 3.580”
Ford/New Holland
A 17.375”
A 17.375”
A-143049
Rake Tooth
A 7.25”
B 3.5”
C 2.25”
A-64562
Rake Tooth
A 7”
B 3.875”
C 2.375”
Ford / New Holland: (RAKE: 55, 56, 57, 256, 258, 259, 260)
A-40917
Rake Tooth
A 7”
B 3.375”
C 1.620”
Fella: (HAY TEDDER: UH320)
A-460304K
C 3.500”
C 1.620”
Rotary Rake Tine
B 3.625”
B 2.250”
Ford / New Holland: (RAKE: 14-20 S/N Z1000 >, (14-40, 14-41 ALL
1949 & UP), SEVERAL)
Fella: (HAY TEDDER: UH320)
A-491100
A 7.375”
C 1.520”
Tedder Tooth
B 3.625”
Rake Tooth
Ford / New Holland: (RAKE: 14-20 < S/N W2000 1948 & up)
Tedder Tooth
B 3.625”
A-142856
C 1.535”
Fella: (HAY TEDDER: TS7, TS8, UH320)
A-491100
Fella: (HAY TEDDER: TS250, TS280, TS290, TS310, TS320, TS330,
TS335, TS385, TS415, TS630, TS631, TS7, TS780, TS8, UH320)
Tedder Tooth
Fella: (HAY TEDDER: TS250, TS280, TS290, TS310, TS320, TS330,
TS335, TS385, TS415, TS630, TS631, TS780)
A-490046
Tooth Mounting Hardware Kit
B 3.75”
Fella: (HAY TEDDER: TH410, TH430, TH450H, TH520, TH540, TH680,
TH700, TH800)
A-491774
Tooth Mounting Hardware Kit
Tooth Mounting Hardware Kit
C 2.25”
Ford / New Holland: (RAKE: 55 prior to 1951)
Fella: (HAY TEDDER: (TH2, TH20, TH330, TH380, TH4, TH40, TH460,
TH6 ALL Used W/ 460181, 460182, 461110 & 461111 Teeth))
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
59
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-850612
Rake Tooth (Single Tine)
A Yoke Opening 1-5/8”
B Punched Hole
A-792493K
C For 3/8” Bolt
Ford / New Holland: (RAKE: 256, 56, 57)
A-850613
LH Rubber Mounted Tooth
Ford / New Holland: (MOWER CONDITIONER: 1495, 1496, 1499),
(RAKE: 256, 258, 259, 260), (MOWER CONDITIONER: 495, 499), (RAKE:
55, 56, 57)
Ford / New Holland: (RAKE: 258, 259, 260)
A-850614
RH Rubber Mounted Tooth
Hold Down Clip
Ford / New Holland: (MOWER CONDITIONER: 1495, 1496, 1499),
(RAKE: 256, 258, 259, 260), (MOWER CONDITIONER: 495, 499), (RAKE:
55, 56, 57)
A-280744
Crrg Bolt 3/8-16 X 2-1/2
PKG QTY 10
Ford / New Holland: (MOWER CONDITIONER: 1495, 1496, 1499),
(RAKE: 256, 258, 259, 260), (MOWER CONDITIONER: 495, 499), (RAKE:
55, 56, 57)
Ford / New Holland: (RAKE: 258, 259, 260)
A-37762
Baler Tooth
A 6.00”
B 4.00”
A-146545
A 6.25”
Rake Tooth
B 5”
C 2.25”
Ford / New Holland: (RAKE: 503)
A-107058
Rake Tooth
A 6.75”
B 3.687”
C 2.437”
Ford / New Holland: (RAKE: 508)
A-539281
Tine, RH
A 17.625”
B 2.375”
C 2.250”
Ford / New Holland: (RAKE/TEDDER: 254, 255)
A-539330
C 1.50”
Ford / New Holland: (SQUARE BALER: 67)
A-127566
Baler Tooth
A 5.75”
B 4”
C 1.5”
Ford / New Holland: 268, 269, 270, 273, 67, 69, 78, SUPER 68
A-12027
Baler Tooth
DIM A 7.25”
DIM B 4.00”
DIM C 1.50”
Ford / New Holland: (SQUARE BALER: 77, 80, 87, 98, SUPER 77)
Tine, LH
Ford / New Holland: (RAKE/TEDDER: 254, 255)
60
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-792493
PKG QTY 10
Clip Kit
OrderForm
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-149956
Baler Tooth
A 6.0”
B 1.5”
C 4.0”
Ford / New Holland: (SQUARE BALER: 150, 250, 350, 504, 506, 509,
520, 530, 532, 540, 542)
A-28286
A 6.375”
Baler Tooth
B 4.250”
C 1.500”
Ford / New Holland: (SQUARE BALER: 166, 66, SUPER 66)
A-147535
A 5.750”
A-788853
Baler Tooth
A 5.75”
B 2.5”
C 1.625”
Ford / New Holland: (SQUARE BALER: 565 SN 808917>, 570 SN
804880>, 575 SN 808665>), (ROUND BALER: 848 SN 714629>, 853
SN 724165>, 855 SN 733140>)
A-131673
Baler Tooth
A 5.75”
B 2.5”
C 1.625”
Ford / New Holland: 273, 845, 846, 847, 850, 851, 852
Baler Tooth
A-252178
B 4.250”
Ford / New Holland: (SQUARE BALER: 1280, 1281, 1282, 1283,
1290, 1425, 178, 277, 278, 280, 281, 282, 283, 285, 286, 290, 311,
316, 320, 326, 425, 430, 500, 565, 568, 570, 575, 78, 99, S78)
C 1.500”
Ford / New Holland: (SQUARE BALER: 250, 504)
A-241380L
Baler Tooth, LH
A 6”
B 2.5”
C 4.437”
Ford / New Holland: (MOWER CONDITIONER: 488, 495, 499, 1495,
1499)
A-241379R
Baler Tooth, RH
A 6”
B 2.5”
C 4.437”
Ford / New Holland: (MOWER CONDITIONER: 488, 495, 499, 1495,
1496, 1499)
A-210614C1
Baler Tooth
A 6.25”
B 2.75”
C 1.375”
Ford / New Holland: (SQUARE BALER: 555, 565, 571, 571W)
A&I PRODUCTS
fax: 1-800-511-0516
Tine, RH
A-128102
Baler Tooth
A 7.25”
B 4”
Ford / New Holland: (SQUARE BALER: 1280, 1281, 1290, 280, 281,
290)
A-683310
Baler Tooth
A 5.75”
B 2.5”
C 1.625”
Ford / New Holland: (SQUARE BALER: 2000), (ROUND BALER: 848 SN
<714628, 849, 853 SN <724164, 855 SN <733139)
A-76517
Windrower Tooth
A 6.5”
B 4.25”
C 1.875”
Ford / New Holland: (MOWER CONDITIONER: 460, 461, 467), (WINDROWER: 468), (MOWER CONDITIONER: 472, 474, 488, 492), (WINDROWER: 903, 907, 909, 912, 1100, 1112, 1114, 1118 self-propelled)
e-mail: [email protected]
1-800-657-4343
61
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-278687
A 12.750”
Tedder Tooth
B 3.625”
Freudendahl
C 2.750”
Ford / New Holland: (HAY TEDDER: 156, 158, 162 Early Models)
Tedder Tooth
A 3.625”
B 12.5”
C 2.75”
Ford / New Holland: 156, 157, 162 Late Models, 163, 165
A-278830
A 15.750”
Rake Tooth
A 14.170”
B 10.430”
Rake Tooth
A 14.170”
B 10.430”
Ford / New Holland: (HAY TEDDER: SEVERAL)
Pickup Tooth
A 4.20”
B 5.90”
C 4.134”
D 2.000”
Freudendahl (JF): (RAKE: SEVERAL)
Galfre
C 2.000”
A-29971
D 2.000”
Freudendahl (JF): (RAKE: SEVERAL)
A-14330201
Tedder Tooth
B 4.218”
C 4.134”
C 1.50”
Ford / New Holland: (FORAGE PICK-UP HEAD: 626, 727, 728, 820,
821)
A-86729947
Rake Tooth (7mm /.276” Wire)
A 6.00”
B 11.00”
C 15.00”
Ford / New Holland: HT152, HT154
A-10370000
Rake & Tedder Tooth
A 3.5”
B 15.250”
C 2.787”
Galfre: (RAKE: (280, GT280, GTS280 ALL <-1995))
A-GT46S
Tedder Tooth
A 16.00”
B 3.50”
C 2.787”
Galfre: (280, GT280, GTS280 ALL Year 1995>)
A-1407
Tedder Tooth
A 14.960”
B 3.940”
C 1.456”
Galfre: (RAKE: SEVERAL)
A-1408
Tedder Tooth
A 14.960”
B 3.940”
Freeman
A-F1226
Baler Tooth
C 1.456”
Galfre: (RAKE: SEVERAL)
A 7”
B 2.75”
C 1.562”
Freeman: (SQUARE BALER: SEVERAL)
62
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-279542
A-14330200
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-GS-3
LH Rake / Tedder Tooth
A 13.500”
B 3.250”
C 12.250”
D 2.0625”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Galfre: (HAY TEDDER: 250 Blue Tooth)
A-GS-2
RH Rake / Tedder Tooth
A 13.500”
B 3.250”
C 12.250”
A-71607
Baler Tooth
A 5.625”
B 3.125”
C 1.625”
Gehl: SEVERAL Later Models
D 2.0625”
A-H794
Baler Tooth
DIM A 2.875”
DIM B 4.75”
Gehl: SEVERAL Early Models
Galfre: (HAY TEDDER: 250 White Tooth)
A-GS-1
Rake & Tedder Tooth
A-P1546
Spring Harrow Tooth
A 3.5”
B 13.250”
A 11.5”
B 2.875”
C 2.787”
Galfre: SEVERAL All Models W/ Black Tines
A 6”
C 1.875”
PKG QTY 10
A-807-079C
Tine
A 10.00”
B 3.625”
Grimm
Baler Tooth
A 5.125” Tine Length B 3.500” Width C 1.625” Coil Dia.
Gehl: (ROUND BALER: 1600)
A-56350
A 4.625”
A-GT51
Tedder Tooth
A 9.125”
B 3.687”
Grimm: (HAY TEDDER: SEVERAL)
Baler Tooth
B 4”
C 2.00”
Great Plains: (SEVERAL: HARROW)
Gehl: (RAKE: 2130, 2160)
A-664491
Dia. Wire .375”
Great Plains
Rake Tooth
B 3.750”
Coil I.D. 2.150”
Glencoe: (HARROW: SEVERAL)
Gehl
A-611181
DIM C 1.5625”
Guappo
A-608754
Rake Tooth
A 14.500”
B 11.00”
C 1.625”
Gehl: (ROUND BALER: SEVERAL)
C 7.00”
Guappo: (RAKE: SEVERAL)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
63
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
H&S
A-203055
Rake Tooth
A 15”
B 11.5”
Rake Tooth (7mm /.276” Wire)
DIM B 11.00”
A 5.250”
B 2.5”
C 1.5”
Hesston: (ROUND BALER: 530, 540, 5510, 5530, 5540, 5545, 5585)
A-700703860
Tine, Double
A 5.000”
B 2.375”
DIM C 15.00”
H&S: (RAKE: SEVERAL)
A-TEHS1
Baler Tooth
C .437”
Hesston: (SQUARE BALER: 4450, 4570, 4590, 4650, 4655, 4690 SN:
101-555, 4690S SN: 101-555)
Rake Tine
A-8045981
Tine, Double
A 6.00”
B 2.50”
PKG QTY 40
H&S:
Hawk Bilt
A-186SE
A 7.5”
Rake Tooth
C 1.50”
Hesston: (SQUARE BALER: 4600)
B 3.687”
A-700709760
Tine, Double
A 7”
B 2.375”
C 1.75”
Hawk Bilt: (RAKE: SEVERAL)
Hay Buster
A-268SE
Baler Tooth
A 4.75”
B 3.187”
Hesston: (SQUARE BALER: 4750), (ROUND BALER: 550 SN: 101 >,
555S, 555T, 560, 565A, 565T)
A-700714826
Tine, Double
A 5.125”
B 2.375”
C 1.5”
Hay Buster: (SQUARE BALER: SEVERAL)
Heath (HFE)
A-E806-001
Tooth, Rubber
A 8”
B 1.25”
Heath (HFE): (WINDROWER: SEVERAL Bean Windrower)
C 1.900”
Hesston: (SQUARE BALER: 4755), (ROUND BALER: 545, 845, 855, 856)
A-700716132
Tine, Double
A 5.375”
B 2.375”
C 1.900”
Hesston: (SQUARE BALER: 4790)
64
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
DIM A 6.00”
A-01710102
C 6.5”
H&S: (RAKE: SEVERAL)
A-HS1ERT
Hesston
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-7893746
Baler Tooth
A 6.250”
B 3.312”
C 1.5”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Hesston: (SQUARE BALER: 4800)
A-700714199
Tine, Double
A 6.500”
B 3.125”
C 1.500”
Hesston: (SQUARE BALER: 4900, 4910)
A-1711951
Baler Tooth
A 5.5”
B 3.125”
C 1.5”
Hesston: (ROUND BALER: 5510)
A-7894306
A 5.5”
A 4.625”
B 3.625”
C 1.5”
A 16.00”
B 3.50”
C 2.787”
Hesston: 3710, 3717, 3727
A-PZ107
Tedder Tooth
A 9”
B 5.125”
C 4”
D 6.750”
E 2.5”
Hesston: (HAY TEDDER: SEVERAL LH narrow)
A-PZ224
Tedder Tooth
A 9.5”
B 5”
C 4”
D 7”
E 2.5”
Hesston: (HAY TEDDER: SEVERAL RH narrow)
A-PZ225
Tedder Tooth
A 8”
B 3”
C 8”
D 2.5”
E 6.5”
F 2.5”
E 6.5”
F 2.5”
Hesston: (HAY TEDDER: SEVERAL RH wide)
A-PZ110
Tedder Tooth
A 8.5”
B .750”
Tedder Tooth
B 3.125”
C 1.5”
Hesston: (ROUND BALER: 5600, 5800)
A-96HE2
Tedder Tooth
Baler Tooth
Hesston: (ROUND BALER: 5500)
A-7751621
A-GT46S
C 7.125”
D 4.5”
Hesston: (HAY TEDDER: SEVERAL LH wide)
A-GS-1
Rake & Tedder Tooth
A 3.5”
B 13.250”
Rake Tooth
C 2.787”
Hesston:
A 6.000”
B 3.500”
C 1.875”
Hesston: (WINDROWER CONDITIONER: PT7, PT10, PT12), (MOWER
CONDITIONER: 1012), (WINDROWER: 1070, 1090, 420, 620, 1014,
6600)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
65
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-7895642
Tine, Double
John Deere
Rake Tooth (Single Tine)
A-AE47389
A 1-5/8” Yoke Opening
A 2.75”
John Deere: (RAKE: 54, 64, 650, 660, 670, 672, 74, 652, 662)
B 1.937”
A-7894751
A-257SE
Rake Tooth
A 7”
B 3.625”
Forage Harvester Tooth
C 2.187”
John Deere: (RAKE: 350, 851, 858, 894, 896)
A 4.75”
B 2.375”
C 1.5”
A-186SE
Rake Tooth
A 7.5”
B 3.687”
Hesston: (FORAGE HARVESTER: 688)
Hume
A-481088
LH Reel Tooth
C 1.75”
John Deere: (RAKE: 553, 594)
A 3.00”
B 1.50”
C 11.50”
A-237SE
Rake Tooth (Quick Detach)
A 7.375”
B 3.625”
Hume: (HEADER: SEVERAL)
A-48107
RH Reel Tooth
C 1.75”
John Deere: (RAKE: 596, 597, 714)
A 3.00”
B 1.50”
C 11.50”
A-EF2888001
Rake Tooth (Single Tine)
Hume: (HEADER: SEVERAL)
A-H1611
Reel Tooth, Large Dia.
PKG QTY 10
John Deere: (RAKE: 700)
A .218” Dia.
Rubber Mtd Rake Tooth
A-AE47389
PKG QTY 5
Hume: (HEADER: SEVERAL)
A-H31
Reel Tooth, Small Dia.
A 1-5/8” Yoke Opening
John Deere: (RAKE: 700)
A-AE57831
Rake Tooth
A 17.50”
B 10.00”
A .187” Dia.
Hume: (HEADER: SEVERAL)
C 6.00”
John Deere: (RAKE: 702, 704)
66
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Hesston: (AUGER HEADER: 10’), (MOWER CONDITIONER: 1150, 1170),
(AUGER HEADER: 12’), (MOWER CONDITIONER: 1260, 1265, 1270,
1275), (AUGER HEADER: 6665, 6666, 8010, 8020, 8400)
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-241SE
Rake Tooth
A 5.50”
B 4.00”
C 1.75”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
John Deere: (RAKE: SEVERAL)
A-268SE
A 4.75”
Baler Tooth
A 5.75”
B 2.437”
C 1.5”
John Deere: 330, (335, 375 ALL SN 915001->), 385, 430, 435 SN
921151->, (446, 447, 448, 456, 457, 458, 466, 467 ALL W/ REGULAR
PICKUP), 530, 535 SN 921940->, (546, 547, 556, 557, 558, 566, 567,
568 ALL W/ REGULAR PICKUP)
Baler Tooth
B 3.187”
A-E79475
A-E67036
Baler Tooth
A 4.625”
B 2.375”
C 1.5”
John Deere: (SQUARE BALER: 8F w/ pick-up attachment)
A-276SE
Baler Tooth
C 1.5”
John Deere: (ROUND BALER: 410, 430, 500, 510, 530)
A 6.75”
B 3.812”
A-E90235
Spring Tooth
A 2.50”
B 7.50”
C 1.60”
John Deere: (SQUARE BALER: 14T, 24T, 214T)
A-E13784
Rake Tooth
John Deere: (446, 447, 456, 457, 466, 467, 546, 547, 556, 557, 566,
567 ALL W/ Mega Pickup)
A 9.25”
B 3.75”
A-N135002
Harrow Tine
A 13.75”
B 7.75”
C 1.62”
John Deere: (SQUARE BALER: 216)
A-E41833
Baler Tooth
C 2.37”
John Deere: (HARROW: SEVERAL Built Prior To 1974)
A 6.5”
B 2.25”
A-H33332
Reel Finger, RH
A 11.50”
B 1.50”
C 1.625”
John Deere: (SQUARE BALER: 327, 336, 337, 346, 347), (ROUND
BALER: 467)
A-E74678
Baler Tooth
C 3.00”
John Deere: (WINDROWER PLATFORM: 78), (DRAPER PLATFORM:
120), (WINDROWER PLATFORM: 130), (DRAPER PLATFORM: 135)
A 4.625”
B 2.437”
A-E68906
Rake Tooth, Windrower
DIM A 7”
DIM B 3.5”
C 1.500”
John Deere: (ROUND BALER: 330, 340, 530, (435, 535 ALL Early
Models))
DIM C 2”
John Deere: (AUGER HEADER: 230, 240), (MOWER CONDITIONER:
710, 720, 820, 1207, 1209, 1217, 1219, 1380, 1424)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
67
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-E37596
A 5.5”
Rake Tooth, Windrower
B 3.5”
A-203055
Rake Tooth
A 15”
B 11.5”
C 1.75”
John Deere: (AUGER HEADER: 183, 220)
C 6.5”
Koehn: (RAKE: SEVERAL)
Harrow Tooth
Krause
A 13.75”
B 7.00”
Harrow Tooth
DIM A 11.875” DIM B 8.250”
A 13.5”
B 7”
DIM C 2.400”
Kewanee
A-B5182
Spring Harrow Tooth
A 13.50”
B 7.375”
C 3”
Krause: (HARROW: SEVERAL)
A-76126
John Deere: (CULTIVATOR: 1050, 1060, 960), (CHISEL PLOW: 1650),
(PLOW: 610), (DISC HARROW: 630, 635)
Spring Harrow Tooth
DIM A 10.875” DIM B 7.500”
DIM C 2.400”
Krause: (HARROW: SEVERAL)
Krone
A-0280650
Rake Tooth
A 7.280”
B 2.640”
C 2.750”
Kewanee: (DISC HARROW: 1175 10/1986> w/ 161 Harrow Attachment), (CULTIVATOR: (381, 382, 383, INTEGRATOR 490 SERIES 3 ALL
10/1986> w/ 161 Harrow Attachment))
A-61727
Harrow Tooth
C 2.37”
John Deere: (DISC HARROW: 210, 215, 220 SERIES Center-Fold,
Power Flex, 230 Wing-Fold, Power Flex, 235 Center-Fold Disk, 235
Wing-Fold Disk), (HARROW: SEVERAL MODELS 1975-1981)
A-N188605
A-76-156
C 1.062”
D 2.950”
Krone: (RAKE: LM65)
A-600039
Reel Tooth, YLW (LH)
A 14”
B 3.75”
Spring Harrow Tooth
C 13.1875”
D 2.25”
Krone: (HEADER: SEVERAL)
A 10.375”
B 7.250”
C 2.750”
A-600038
Tedder Tooth, Red (RH)
A 13.25”
B 3.5625”
Kewanee: (CULTIVATOR: (251, 252, 253, 270, 370 ALL <10/1986 w/
161 Harrow Attachment))
C 14.375”
D 2.25”
Krone: (HEADER: SEVERAL)
68
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-N136767
Koehn
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-9379190
Baler Tooth
A 6.250”
B 3.000”
C 1.062”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Baler Tooth
A 6.500”
B 3.150”
C .790”
A 5.75”
Krone Tooth
B 2.56”
A 17.050”
B 16.930”
C 3.860”
D 1.690”
A-57720200
Tedder Tooth
A 23.030”
B 22.250”
C 20.050”
D .630”
Kuhn: (HAY TEDDER: GA300GT SN S0201-960580, GA3200GT SN
970001->, GA3501S SN 920000->, (GA381GM, GA381GT ALL SN
U0001->929999), (GA4101GM, GA4101GT ALL SN 930000-949999),
GA682, GA7301, GA7302DL SN 940000-B0474, GA732, GA782,
GM10)
Krone: (ROUND BALER: KR120, KR150, KR155)
A-9379200
Tedder Tooth
Kuhn: (HAY TEDDER: GA280, GA300, GA301, GA402)
Krone: (ROUND BALER: KR120, KR150, KR180)
A-9380403
A-57701701
A-57609000
Tedder Tooth
A 3.625”
B 12.5”
C 1.5”
Krone:
Kuhn
A-57601673
Rake Tooth
A 3.625”
B 12.5”
C 2.75”
Kuhn: (HAY TEDDER: (GF22NP, GF22NT ALL SN 800001->), (GF3701,
GF4201MH ALL SN 940001->), (GF440SRP, GF440T ALL SN U0001>), (GF5000MH, GF5000T ALL SN <-919999), GF5001, GF5001 SN
920001->, GF6000, GF6000MH SN T0001->, GF6301, GF6301MH SN
910000->, GF7000T SN R0001->, GF7001, GF7001T SN R0001->,
GRS21, GRS24)
C 2.750”
A-58505210
Hay Tedder Tooth
A 15.750”
B 4.218”
Kuhn: (RAKE: GF22N), (HAY TEDDER: GF5000, GF6001)
A-58561900
A 12.750”
Tedder Tooth
B 3.625”
Kuhn: (HAY TEDDER: GF22SP, GF23, GF4, GF440M SN <-800350,
(GF440P, GF440T ALL SN <-805100), (GF452M, GF452P, GF452T ALL
SN <-803200), GF4SP)
C 2.750”
Kuhn: (RAKE: GF440S, SRP, (23N, 440 ALL 1981->)), (HAY TEDDER:
GF22F, GF4000, GF5000)
A-57502000
C 2”
A-57601100
Tedder Tooth
A 15.200”
B 4.370”
Tedder Tooth
C 1.812”
Kuhn: (HAY TEDDER: GF5000H, GRS20, GRS21)
A 18.500”
B 19.020”
C 3.900”
D 1.730”
Kuhn: (HAY TEDDER: GA20, GA230P, GA230SP, GA250, GA280P,
GA280SP, GA300SP)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
69
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-57644010
A 20.275”
Tedder Tooth
B 4.135”
Lely
Tedder Tooth (LH)
A 14.570”
B 11.220”
C 2.000”
Kuhn: (HAY TEDDER: GRS25, GRS25N)
Tooth Mounting Hardware Kit
C 4.020”
D 1.420”
Lely: (HAY TEDDER: GEMINI 300 Early Model)
A-4101101390
Tedder Tooth (RH)
A 11.220”
B 14.570”
DIM A (1) w/ M14 Bolt
Kuhn: (HAY TEDDER: (GF22F, GF4000, GF440, GF452, GF5000, GF671
ALL Used W/ 58505210, 58505214 & 58561900 Teeth))
A-58503800K
Tooth Mounting Hardware Kit
Kuhn: (HAY TEDDER: SEVERAL)
A-58525700K
Lely: (HAY TEDDER: GEMINI 300 Early Model)
A-4108003910
Tedder Tooth (LH)
A 14.570”
B 11.140”
C 4.020”
D 1.378”
Lely: (HAY TEDDER: GEMINI 300, GEMINI 600)
Tooth Mounting Hardware Kit
A-4108003920 Tedder Tooth (RH)
A 11.140”
Kuhn: (HAY TEDDER: SEVERAL)
A-80251435
C 4.016”
B 14.570”
C 4.020”
D 1.378”
Lely: (HAY TEDDER: GEMINI 300, GEMINI 600)
Washer, Tooth Mounting
A-4101500580 Tedder Tooth
Kuhn: (HAY TEDDER: SEVERAL)
A 14.960”
B 11.220”
C 3.780”
D 1.460”
C 3.780”
D 1.460”
Lely: (HAY TEDDER: LOTUS 230)
A-4101500680
Tedder Tooth
A 11.220”
B 14.960”
Lely: (HAY TEDDER: LOTUS 230)
70
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-58525714K
A-4100302080
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-4101601490
A 11.140”
Tedder Tooth (RH)
B 14.960”
M&W
C 3.860”
D 1.460”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Lely: (HAY TEDDER: (HAY LOTUS 300, LOTUS 300 ALL Early Model))
A-4101601590
Tedder Tooth (LH)
A 14.960”
B 11.140”
C 3.860”
Tine, Tedder
A 11.75”
B 3.45”
C 2.60”
M & W: PT207, PT405, PT405H, PT407
D 1.460”
A-3637507
Rake Tooth
A 15”
B 11.5”
C 6.5”
M & W: (RAKE: SEVERAL)
Lely: (HAY TEDDER: (HAY LOTUS 300, LOTUS 300 ALL Early Model))
A-4101701260
A-3677422
Tedder Tooth (LH)
A-MWS2TT
Tedder Tooth
A 12.50”
B 3.45”
C 2.60”
M & W: (HAY TEDDER: SEVERAL)
A 14.570”
B 10.830”
C 3.540”
D 1.460”
A-1437434
Baler Tooth
A 6.300”
B 2.834”
Lely: (HAY TEDDER: HAY LOTUS 300, LOTUS 460, LOTUS 520, LOTUS
600 SNB, LOTUS STABILO 520, LOTUS STABILO 600, LOTUS STABILO
640, LOTUS STABILO 675, LOTUS STABILO 725, LOTUS STABILO 770)
A-4101701380
Tedder Tooth (RH)
C 1.100”
M & W: (ROUND BALER: 1500, 1800)
A 10.830”
B 14.570”
C 3.540”
Baler Tooth
A 5.20”
B 3.00”
D 1.460”
Lely: (HAY TEDDER: HAY LOTUS 300, LOTUS 460, LOTUS 520, LOTUS
600 SNB, LOTUS STABILO 520, LOTUS STABILO 600, LOTUS STABILO
640, LOTUS STABILO 675, LOTUS STABILO 725, LOTUS STABILO 770)
A-TS1200
A-1437430
Tooth Mounting Hardware Kit
C 1.05”
M & W: (ROUND BALER: SEVERAL)
Lely: (HAY TEDDER: SEVERAL)
Lockwood-Innes
A-RTIBTLK
Bean Windrower Tooth, Rubber Mount
Bolt Hole 5/16” Inside Yoke
Dia. 1 1/4”
Tine Dia. 1/4” D Heat Treated
Lockwood-Innes: (BEAN WINDROWER: SEVERAL)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
71
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-1031118M1 Rake Tooth
Massey Ferguson
A-667530M1
Rake Tooth
A 7.25”
B 1.875”
A 17.5”
A 7.25”
B 1.937”
C 3.875”
A-581318M91 Tine Bar Bearing
Overall Length
2 1/8”
Thread Length Thread 3/4”
1 1/2”
Massey Ferguson: (RAKE: 25 SN 419012167>, 37 SN
1283005190>, 585, 588)
A-580848M1
Rake Tooth
A 7.375”
B 2”
C 1.875”
Massey Ferguson: (RAKE: SEVERAL <-1958)
Massey Ferguson: (RAKE: 25, 36, 37, SEVERAL)
Bearing O.D.
1 7/8”
A-667656M1
A-DE03435
Rake Tooth
A 7.500”
B 1.875”
Massey Ferguson: (RAKE: SEVERAL)
A-TEO01236
Rake Tooth
A 9.00”
B 3.50”
Rake Tooth (LH)
PKG QTY 10
C 1.75”
Massey Ferguson:
Massey Ferguson: (RAKE: 25 SN 419009907>, 36 SN 012159>, 37)
A-665929M1
Baler Tooth
A 6.375”
B 4”
A-1023216M1 Rake Tooth
A 17.5”
B 12.5”
C 6”
Massey Ferguson: (RAKE: 29 12 1/2” Offset)
A-92611
Rake Tooth (Long)
A 17.5”
B 12 1/2”
C 1.625”
Massey Ferguson: (SQUARE BALER: (3, 9, 10, 12 ALL <-1958))
A-665930M1
Baler Tooth
A 6.500”
B 1.625”
C 6”
Massey Ferguson: (RAKE: 29, 39 5 bar)
C 2.625”
Massey Ferguson: (SQUARE BALER: 10, 12, 3, 9)
72
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Rake Tooth
C 6”
Massey Ferguson: (RAKE: 29 SN 1233000011> W/ 10” Offset, 39
SN 1411000001> W/ 10” Offset)
Massey Ferguson: (RAKE: 21 MH, 25 SN 14550>)
A-668364M1
B 10”
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-585136M1
Baler Tooth
McKee
A-29493
A 6.5”
B 2.75”
C 1.625”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Massey Ferguson: (SQUARE BALER: 120, 124, 126, 128, 130, 220,
224, 228)
Rake Tooth
McKee: (RAKE: SEVERAL)
Midwest
A-CH113A
Harrow Tooth
PKG QTY 10
A 12.750”
B 6.5”
Massey Ferguson: (ROUND BALER: 1440, 1455, 1550, 1565)
Midwest: (HARROW: SEVERAL)
A-27997001
Rubber Mtd Tooth - 2 Prong
Miller
A-1053394M1 Baler Tooth
A 7”
B 2.875”
C 1.687”
Massey Ferguson: (ROUND BALER: 1560, 1655)
A-665930M1
C 3.250”
Baler Tooth
A-TE1700085
Rake Tine
A 20.25”
B 3.50”
C 2.50”
Miller:
A-TE1700462
Rake Tine
A 4-3/8”
B 2-1/2”
C 22”
Miller:
A 6.500”
B 1.625”
C 2.625”
A-TE1700763
Rake Tine
A 20.50”
B 2.50”
Massey Ferguson: (SQUARE BALER: SEVERAL <-1958)
A-1036679M1 Reel Tooth
Massey Ferguson: (COMBINE: 300, 410 S/N 1200006777>,
510 S/N 1201003653- 026828, 750 S/N <169619596, 760 S/N
<1746009413)
C 3.75”
Miller:
A-TE1700764
Rake Tine
A 3-3/4”
B 2-1/2”
A-1052668M1 Tedder Tooth
A 7.750”
C 22”
Miller:
PKG QTY 5
Massey Ferguson: (SWATHER: 775, 785, 885), (COMBINE: SEVERAL
Pickup Reels)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
73
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
Miscellaneous
A-828001004
Spring Harrow Tooth
A 12.750”
B 7.250”
C 2.875”
Rake Tooth
A 5.250”
B 4.5”
C 1.875”
New Idea: (RAKE: 404 1965->)
A-96R1
Rake Tooth
Yoke Opening 1-5/8”
Bolt For 3/8”
New Idea
A-GT46S
Tedder Tooth
New Idea: (RAKE: SEVERAL)
A 16.00”
B 3.50”
C 2.787”
A-96R2
Rake Tooth
New Idea: 4210, 4217, 4227
A-048ME
Rake Tooth
PKG QTY 10
New Idea: (RAKE: SEVERAL)
A 7.5”
B 3.375”
C 1.750”
A-0782ME1
Rake Tooth
A 7”
B 3.625”
New Idea: (RAKE: 4, 44, 45G)
A-M873
Rake Tooth
C 2.5”
New Idea: (RAKE: SEVERAL 1957->)
A 9.00”
B 3.30”
C 1.98”
A-149781
Harrow Tooth
A 11.250”
B 7.5”
New Idea: (RAKE: 4, 44, 45G)
A-NE400033
Rake Tooth
C 3.5”
New Idea: (HARROW: SEVERAL)
A 6.625”
B 3.875”
C 2.5”
A-41410
Harrow Tooth
A 16.5”
B 7.5”
New Idea: (RAKE: 49, 400, 402, 403 1955->)
A-400033
Rake Tooth
C 3.5”
D 12.5”
New Idea: (HARROW: SEVERAL)
A 6.625”
B 2.437”
C 4.00”
New Idea: (RAKE: (400, 402, 403, 49 ALL 1955>))
74
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Miscellaneous:
A-400341
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-290141
A 7.125”
Rake Tooth
B 3.750”
C 1.875”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
New Idea: (MOWER CONDITIONER: 270, 271, 299, 750, 751, 752)
A-103012
A 5.750”
Baler Tooth
B 2.625”
A-600034
Tedder Tooth
A 20.080”
B 3.580”
C 1.500”
Niemeyer: (HAY TEDDER: RS311D, RS330D SN 2450>, RS330VRF,
RS430D, RS550D)
A-600030
Tedder Tooth
A 21.250”
B 3.465”
C 1.500”
Niemeyer: (HAY TEDDER: RS420D)
C 1.5”
New Idea: (ROUND BALER: 55, 465, 483, 484, 485, 486)
A-600029
Tedder Tooth
A 21.250”
B 3.390”
Niemeyer
A-600038
Tedder Tooth, Red (RH)
C 1.535”
Niemeyer: (HAY TEDDER: SEVERAL)
OMC
A 13.25”
B 3.5625”
C 14.375”
D 2.25”
A-11032347
Baler Tooth
A 6.125”
B 2.5”
Niemeyer: (HAY TEDDER: HR301, HR361, HR362, HR401, HR460.11,
HR462, HR501, HR562, HR621, HR702, HR751)
A-600039
Reel Tooth, YLW (LH)
C 1.562”
OMC: (ROUND BALER: 590, 595, 596)
A 14”
B 3.75”
C 13.1875”
D 2.25”
Niemeyer: (HAY TEDDER: HR301, HR361, HR362, HR401, HR460.11,
HR462, HR501, HR562, HR621, HR702, HR751)
A-600013
OTMA
A-203055
Rake Tooth
A 15”
B 11.5”
Tedder Tooth
C 6.5”
OTMA: (RAKE: SEVERAL)
A 21.614”
B 3.425”
C 1.500”
A-OT3RT
Rake Tooth
A 26.380”
B 3.780”
Niemeyer: (HAY TEDDER: RS280, RS281, RS28D SN 1601>, RS30,
RS300, RS310, RS330, RS420D)
A-600014
Tedder Tooth
C 1.770”
OTMA: (RAKE: SEVERAL)
A 22.640”
B 3.385”
C 1.575”
A-OT2TT
Tedder Tooth
A 13.40”
B 3.75”
Niemeyer: (HAY TEDDER: RS28DL SN <1600)
C 1.95”
OTMA: (HAY TEDDER: SEVERAL)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
75
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
Owattona
A-11032354
Windrower Tooth
DIM A 6.5”
DIM B 4.25”
DIM C 1.875”
Panorama
A-P2567920
A-608754
Rake Tooth
A 14.500”
B 11.00”
C 7.00”
Rossi: (RAKE: SEVERAL)
A-54
Rake Tooth
A 14.500”
B 11.000”
Tedder Tooth
C 7.00”
Rossi: (RAKE: 2222)
A 3.60”
B 14.00”
C 2.80”
A-11010401
Tedder Tooth
A 3.50”
B 15.250”
Panorama: (HAY TEDDER: SEVERAL)
Pollard
A-7D265
Rake Tooth
C 2.787”
Rossi: (HAY TEDDER: G4L, G4LPE)
A 5.375”
Rossi Tedder Tine
A 14.00”
B 3.625”
B 1.812”
Pollard: (RAKE: SEVERAL)
A-2010R
A-TER2
Rake Tooth
C 2.75”
Rossi: SEVERAL
Schluter
A 8”
B 3.875”
A-MOD712
Tine
A 10.00”
B 3.625”
C 1.875”
Pollard: (RAKE: SEVERAL)
A-1706
Rake Tooth
C 2.00”
Schluter: (HARROW: SEVERAL)
A 6.250”
B 1.687”
Pollard: (RAKE: SEVERAL)
A-162318
Rake Tooth
A 6.00”
B 1.75”
Pollard: (RAKE: SEVERAL)
76
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Owattona: (WINDROWER: 157, 207, 235, 257)
Rossi
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Sitrex
A-200401
Tine, Tedder
A 11.75”
B 3.45”
Rake Tooth
A 15”
B 11.5”
A 15.00”
A 7.250”
A 17.250”
B 13”
C 5.250”
Tonutti: (RAKE: P4-74, P5-79, RK90, RTP-8, RTP-10)
A-PR015
Rake Tooth - RH
A 17.250”
B 13”
C 5.250”
Tonutti: (RAKE: P4-74, P5-79, RK90, RTP-8, RTP-10)
Rake Tooth
B 11.00”
A-0330049
Rake Tooth
A 18.500”
B 3.385”
C 6.00”
Sitrex: (RAKE: SEVERAL)
A-VLH7002
Rake Tooth - LH
C 6.5”
Sitrex: (RAKE: SEVERAL)
A-SS1RT
A-PL015
C 2.60”
Sitrex: 2G-252, 2GL-302, 4G-384, 5G-520, SG-252, SGL-302,
ST384H, STS20H
A-203055
Tonutti
Rake & Tedder Tooth
B 11”
C 1.850”
Tonutti: (RAKE: SEVERAL)
A-010940
Tedder Tooth
DIM A 12.69”
DIM B 3.25”
C 15”
Sitrex: (RAKE: SEVERAL)
A-SS2TT
Tedder Tooth
DIM C 2.56”
Tonutti: (HAY TEDDER: SEVERAL)
A-P25AG005
A 12.50”
B 3.45”
C 2.60”
Sitrex: (HAY TEDDER: SEVERAL)
Sunflower
A-3616
Spring Harrow Tooth
A 10.750’
B 7.250”
Tine, 7mm
DIM A 7mm
Tonutti: T13, V10 DOMINATOR, V12 DOMINATOR, V14 DOMINATOR,
V16 MILLENNIUM, V18 MILLENNIUM, V20 MILLENNIUM
C 2.375”
Sunflower: (HARROW: SEVERAL)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
77
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
Vermeer
A-115663001
A-96R5
Rubber Mtd Baler Tooth
Rake Tooth
Vermeer:
A-1738001
A 17.5”
B 10”
Bearing, Cam Follower
C 6”
Tedder Tooth
Vermeer: (RAKE: R-21, R-23 Series A W/ SN 101-105 & SN 157-751,
R-23 SN 101-5510 & SN 5631->)
Vicon
A 17.250”
B 13”
A-92611
Rake Tooth (Long)
A 17.5”
B 12 1/2”
C 5.250”
Vermeer: (HAY TEDDER: SEVERAL)
A-48893001
Baler Tooth
C 6”
Vicon: (RAKE: 5, ACROBAT Older Models, H820, HKM SPRINTER,
HKX500 Old Style, HKX620)
A 4.875”
B 3.75”
A-36133
Rake Tooth (Short)
A 17.5”
B 10.00”
C 1.625”
Vermeer: (ROUND BALER: B, C)
A-29001
Baler Tooth
C 6.00”
Vicon: 6, H1020, H1050-7, H1050-9, H1240, H1340, H1350, H820,
HK620, WT300
A 4.75”
B 3”
C 1.625”
A-96VI1
Rake Tooth
A 17.50”
B 10.00”
Vermeer: (ROUND BALER: D)
A-4059001
Baler Tooth
C 6.00”
Vicon:
A 7”
B 2.875”
C 1.687”
A-51001286
Tedder Tooth
A 7.000”
B 4.125”
Vermeer: (ROUND BALER: E, F, G)
A-27997001
Rubber Mtd Tooth - 2 Prong
Vermeer: (ROUND BALER: 504H, 504I, 504I Super, 504L, 505I, 505I
Super, 505L, (5400, 5500 ALL Rebel), 554XL, 555XL, 604J, 604K,
605H, 605J, 605J Super, 605K, 605L, 605XL)
78
A&I PRODUCTS
fax: 1-800-511-0516
C 5.125”
D 9.250”
Vicon: (HAY TEDDER: HAYBOB 300)
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Vermeer: (RAKE: SEVERAL wheel)
A-127062001
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-51001289
Tedder Tooth
A 6.875”
B 4.125”
C 7.5”
D 9.125”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Vicon: (HAY TEDDER: HAYBOB 300)
A-51001287
Tedder Tooth
A 9.000”
B 5.125”
C 4.000”
D 6.750”
Vicon: (HAY TEDDER: HAYBOB 300, HS360)
A-51001288
Tedder Tooth
A 8.50”
B 0.75”
C 7.125”
D 4.50”
Vicon: (HAY TEDDER: HAYBOB 300, HS360)
A-51001367
A-99436217
Tedder Tooth
A 13.00”
B 3.75”
Vicon: (HAY TEDDER: (RS410, RS510, RS610, RS740 ALL Older Model))
A-51000856
Tedder Tooth (LH)
A 15.43”
B 4.37”
C 4.0”
D 7.0”
A-51000855
Tedder Tooth (RH)
A 16.50”
B 4.37”
C 1.65”
D 15.43”
Tedder Tooth (RH)
Vicon:
A-90070741
Vicon: (HAY TEDDER: HS360)
A-PZ225
D 16.50”
Vicon: (HAY TEDDER: (RS410, RS510, RS610, RS740 ALL Newer
Model))
Tedder Tooth
B 5.0”
C 1.65”
Vicon: (HAY TEDDER: (RS410, RS510, RS610, RS740 ALL Newer
Model))
A-90036191
A 9.5”
C 2.75”
Upper Tedder Tooth (LH)
Tedder Tooth
Vicon:
A 8”
B 3”
C 8”
A-99136240
Tedder Tooth (LH)
A 17.50”
B 3.31”
D 2.5”
Vicon: (HAY TEDDER: HS360)
A-99136241
Tedder Tooth (RH)
Vicon:
A-GZ280V
A 17.50”
Tine Saver
B 3.31”
Vicon: (HAY TEDDER: (RC300, RC330 ALL newer model))
Vicon: (HAY TEDDER: (RS410, RS510, RS610, RS740 ALL Used W/
51000856 & 51000855 Teeth))
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
79
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-TH200
Tooth Mounting Hardware Kit
A-1408
Tedder Tooth
A 14.960”
B 3.940”
PKG QTY 10
Vicon: (HAY TEDDER: (RS410, RS510, RS610, RS740 ALL Used W/
99436217 Tooth))
A 5.625”
B 2.750”
C 1.580”
Vicon: (ROUND BALER: RP1210, RP1510)
Walton: (HAY TEDDER: WT9)
A-0946
Tedder Tooth
A 3.5”
B 15.25”
C 2.787”
Walton: (HAY TEDDER: WT9, WT16, WT19, WT21, 21046)
Welger
A-V99136220Z Tine Spring
A-0940522500 Rake Tooth
A 8.19”
B 2.25”
C 1.50”
A 6.29”
Vicon:
Walton
A-5515L
Rake Tooth-LH
DIM A 17.250” DIM B 13”
DIM C 5.250”
B 2.75”
Welger: (RAKE: SEVERAL)
A-034312
Rake Tooth
A 7.75”
B 2.62”
A-034317
Rake Tooth
DIM A 17.250” DIM B 13.000” DIM C 5.250”
A 7.00”
B 2.95”
Walton: (RAKE: FINGER REEL RAKES)
Welger: (RAKE: SEVERAL)
Rake Tooth-RH
A-1407
Tedder Tooth
A 14.960”
B 3.940”
C 1.50”
Welger: (RAKE: SEVERAL)
Walton: (RAKE: FINGER REEL RAKES)
A-5515R
C 2.75”
A-034338
Rake Tooth
A 6.61”
B 2.95”
C 1.25”
C 1.456”
Walton: (HAY TEDDER: WT9)
C 1.25”
Welger: (RAKE: SEVERAL)
80
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-V59130025Z Pickup Tine
C 1.456”
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
White / Oliver
A-500629E
Rake Tooth
DIM A 6.625”
DIM B 3.25”
DIM C 1.812”
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
Rake Tooth
A 8.250”
B 3.125”
Tedder Tooth (LH)
A 15.43”
B 4.37”
C 1.65”
D 16.50”
Zweeger: (HAY TEDDER: (FANEX 400, FANEX 500, FANEX 600, FANEX
641, FANEX 730 ALL 1987>), 400, 500)
White/ Oliver/ Mpl Moline: (RAKE: 107 rotor bar)
A-W505704E
A-PZ339
A-PZ340
Tedder Tooth (RH)
A 16.50”
B 4.37”
C 1.450”
White/ Oliver/ Mpl Moline: (RAKE: SEVERAL)
Wilrich
A-16429
A 16”
Harrow Tooth
B 9.375”
C 1.65”
D 15.43”
Zweeger: (HAY TEDDER: (FANEX 400, FANEX 500, FANEX 600, FANEX
641, FANEX 730 ALL 1987>), 400, 500)
A-PZ107
Tedder Tooth
A 9”
B 5.125”
C 5”
Wilrich: (HARROW: SEVERAL)
Zweeger
A-PZ190
A 13.312”
C 4.370”
A 13.312”
Tedder Tooth
B 11.650”
A 11.650”
C 4.375”
A 8.5”
B .750”
C 7.125”
D 4.5”
A-PZ106
Tedder Tooth
A 7”
B 4.125”
D 1.653”
Tedder Tooth
B 13.312”
Tedder Tooth
Zweeger: (HAY TEDDER: (HAY BOB, HS360 ALL LH wide))
Zweeger: (HAY TEDDER: DS5000)
A-PZ192
A-PZ110
D 1.650”
Zweeger: (HAY TEDDER: DS5000)
A-PZ191
D 6.750”
Zweeger: (HAY TEDDER: (HAY BOB, HS360 ALL LH narrow))
Tedder Tooth
B 11.650”
C 4”
C 5.125”
D 9.250”
Zweeger: (HAY TEDDER: HAY BOB RH narrow)
C 4.370”
A-PZ111
Tedder Tooth
A 6.875”
B 4.125”
D 1.650”
Zweeger: (HAY TEDDER: DS5000)
C 7.5”
D 9.125”
Zweeger: (HAY TEDDER: HAY BOB RH wide)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
81
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
A-PZ224
Tedder Tooth
A 9.5”
B 5”
A-GZ280V
C 4”
D 7”
Zweeger: (HAY TEDDER: HS360 RH narrow)
Tedder Tooth
A 8”
B 3”
C 8”
Zweeger: (HAY TEDDER: (FANEX 400, FANEX 500, FANEX 600, FANEX
641, FANEX 730, 400, 500 ALL Used W/ PZ339 & PZ340 Teeth))
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-PZ225
Tine Saver
D 2.5”
Zweeger: (HAY TEDDER: HS360 RH wide)
A-GZ280V
Tine Saver
Zweeger: (HAY TEDDER: (400, 500, FANEX 400, FANEX 500, FANEX
600, FANEX 641, FANEX 730 ALL Used W/ PZ339 & PZ340 Teeth))
A-TH200
Tooth Mounting Hardware Kit
PKG QTY 10
Zweeger: (HAY TEDDER: DS5000 Used W/ PZ190, 191, 192, 193
Teeth, (HAYBOB 300, HS360 ALL Used W/ PZ106, 107, 110, 111, 224,
225 Teeth))
A-KZ3
Shaft
Zweeger: (HAY TEDDER: FANEX 400)
A-M12LNT
Locknut, Tooth Mounting
PKG QTY 25
Zweeger: (HAY TEDDER: (FANEX 400, FANEX 500, FANEX 600, FANEX
641, FANEX 730 ALL Used W/ PZ339 & PZ340 Teeth))
82
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
OrderForm
TEETH: BALER, HARROW RAKE, TEDDER, ETC.
Complete Fingerwheels
Parts are not original equipment parts and are not sponsored, affiliated, or otherwise connected with any major brand.
A-P20BG003
A-90095347
Complete Rake Wheel, RH
Rake Wheel Complete, (RH) w/ 7mm Tines
Vicon: (RAKE: H1020, H1050, H1240, H1340, H820, HKX621, HKX620)
Gehl: (RAKE: SEVERAL)
A-90095862
Complete Rake Wheel, LH
H&S: (RAKE: SEVERAL)
John Deere: (RAKE: SEVERAL)
Miscellaneous:
OTMA: (RAKE: SEVERAL)
Rossi: (RAKE: SEVERAL)
Sitrex: (RAKE: SEVERAL)
Vicon: (RAKE: H1020, H1050, H1240, H1340, H820, HKX621, HKX620)
Tonutti: (WHEEL RAKE: T13, V10 DOMINATOR, V12 DOMINATOR, V14
DOMINATOR, V16 MILLENNIUM, V18 MILLENNIUM, V20 MILLENNIUM)
Vermeer: (RAKE: SEVERAL)
Walton: (RAKE: FINGER REEL RAKES)
A-P20BG004
Rake Wheel Complete, (LH) w/ 7mm Tines
Gehl: (RAKE: SEVERAL)
H&S: (RAKE: SEVERAL)
John Deere: (RAKE: SEVERAL)
Miscellaneous:
OTMA: (RAKE: SEVERAL)
Rossi: (RAKE: SEVERAL)
Sitrex: (RAKE: SEVERAL)
Tonutti: (WHEEL RAKE: V10 DOMINATOR, V12 DOMINATOR, V14 DOMINATOR, V16 MILLENNIUM, V18 MILLENNIUM, V20 MILLENNIUM)
Vermeer: (RAKE: SEVERAL)
Walton: (RAKE: FINGER REEL RAKES)
A&I PRODUCTS
fax: 1-800-511-0516
e-mail: [email protected]
1-800-657-4343
83

Similar documents

Hay Tool Parts - Baler Teeth - Harrow Teeth - Rake Teeth

Hay Tool Parts - Baler Teeth - Harrow Teeth - Rake Teeth Fella: (HAY TEDDER: (TH360, TH370 ALL Used w/ 488072 Teeth), TH410 Used w/ 487922 Teeth, TH410 Used w/ 488072 Teeth, TH430 Used W/ 487922 Teeth, (TH430, TH440 ALL Used w/ 488072 Teeth), (TH450H, TH...

More information