Haas Control

HIGH-PERFORMANCE
VERTICAL MACHINING CENTERS
Rigid foundation
4-5
Motion control
6-7
Spindle & spindle drive
8-11
Toolchangers
12-13
Chip removal & coolant systems
14-15
Distinctive machines
16
Operator convenience
17-19
Performance enhancements
20-21
Model variations
22-23
Rotary tables & indexers
24-25
The Haas control
26-33
Machine configurations & dimensions
34-35
Specifications
36-39
W
hatever your requirements, there’s a Haas
VMC to meet your needs. Travels range from
8" x 8" x 12" (xyz) for the diminutive Office
Mill, up to 150" x 50" x 50" for the massive
VS-3, and the versatile VF series covers everything between.
Table capacities range from 2 tons for our medium and large
machines, up to 5 tons for the VS series.
The capabilities for Haas VMCs are as varied as the
machine capacities, with many configurations available,
including 40-taper, 50-taper, geared-head, high-speed,
high-production, mold making machines and more. And
the legendary Haas control makes every Haas VMC easy to
operate. Built with the operator and programmer in mind,
it’s packed with intuitive features you won’t find on any
other CNC machining center.
Inside this brochure you’ll find all the latest technological
advancements, new machine sizes and capabilities that Haas
Automation has developed through constant research and
ongoing product development.
2
MODELS:
Office Mill
Mini Mill
Toolroom Mill
Mill/Drill Center
VF-1 & 2
VF-3, 4 & 5
VF-6 – 11
VF / 50-Taper
Gantry Router
Super Large
See model guide on
pages 22-23.
Rigid Foundation
Triangulated Wide-Stance
Castings
Get out your tape measure and check the distance
between leveling bolts. Measure the width of the column
and the depth of the saddle. Then look inside the
castings for the heavy-duty, vibration-absorbing ribs
that Haas designs in. Now go measure the competition
– you’ll find they just don’t measure up to a Haas.
Massive Cast-Iron Construction
Cast iron is more expensive to buy and machine, but it
provides up to ten times the damping capacity of steel.
That’s why Haas uses cast iron for all major components.
Castings are reinforced internally with heavy ribs to
resist flex and damp vibrations, and each casting is
inspected thoroughly before and after machining to
ensure it is free of flaws.
Specifications subject to change without notice. Not responsible for typographical errors.
4
All structural components
are optimized using finite element
analysis (FEA) to produce the most rigid designs.
1 Setup, 5 Sides –
Surfaced, Drilled and Tapped
Haas base castings are machined on state-of-the-art, 5-side CNC machines. Each casting is machined,
drilled, tapped and inspected in a single setup to provide higher accuracies and smoother production.
Our ability to precisely machine all critical features of each casting eliminates alignment errors
in final assembly. High-accuracy in-process inspection
guarantees that every casting meets our stringent
quality standards.
Innovative Designs and High-Accuracy
Processing Yield a
20%
increase in
machine rigidity.
Anti-Flex, Reinforced
Base & Column Castings
Our specially designed base and column
castings feature anti-flex, vibration-absorbing
ribs that transfer vibrations away from
the cutting area. The columns feature an
internal torque-tube configuration that yields
superior rigidity and provides the most antiflex properties of any design.
Rigid, Cost-Effective Design Solutions.
5
Motion Control
Electronic Thermal
Compensation System
When ballscrews rotate, they generate
heat, which can cause them to expand. With
high duty cycles, ballscrew growth can lead
to cutting errors. Our electronic thermal
compensation (ETC) algorithm accurately
models this heating effect and compensates
for screw position.
100% Ballbar Tested
Haas uses a state-of-theart ballbar test to check
the linear accuracy and
geometry of every machine.
This test is done with
a bar that tracks machine
movement to ±0.5 micron,
with a 0.1-micron resolution.
The bar is attached to the
spindle and to a fixed point
on the table. The machine is then put through a series of circular moves to
certify synchronous movement and verify machine squareness.
Data from the ballbar is fed into a computer that plots a chart illustrating
machine accuracy. Any deviations in squareness or accuracy show up as
distorted circles that are very easy for a technician to spot. A copy of this
chart ships with each Haas VMC as assurance that the machine is accurate
and properly aligned.
Double-Anchored
Ballscrews
Haas uses only premium-quality
ballscrews and guides from the world’s
top manufacturers. Although more
expensive, their premium quality is the
only way to achieve the high accuracy
and long life that our customers demand.
Ballscrews are anchored at both ends
and inspected for 100% parallelism to
the axis guides. Preloaded ball nuts
eliminate backlash.
Linear Scales
When absolute positioning
accuracy is necessary,
linear scales are the only
way to ensure exact axis
positioning under fluctuating
temperatures. Linear scales
ensure positioning accuracy
along X, Y and Z axes by
compensating for the thermal
variations inherent in all machine
tools. With a 1-micron resolution,
these scales deliver the extreme
6
accuracy required
for mold making and other highprecision machining applications.
(Available on VF-1 through VF-11.)
Brushless
Servomotors
Recirculating Ball Guideways
Haas uses recirculating ball guideways
for each axis of every VMC. These
guideways are preloaded for zero
clearance, and provide full load-carrying
capacity in all directions. They consume
less power, do not require adjustment
and are proven to outperform sliding
box ways for accuracy and speed. Each
guideway is automatically lubricated to
guarantee long life.
Box Way
Recirculating Ball Guideway
Required Clearance
Zero Clearance
Haas uses state-of-the-art
brushless servomotors that
offer more torque in a smaller
frame than almost any other
motors available. These highperformance servos provide
more power for heavy cuts, and
higher acceleration/deceleration
rates to reduce cycle times. Highresolution encoders and closedloop digital feedback ensure ultraprecise positioning.
Recirculating Ball Guideways
Outperform Box Ways
Recirculating ball guideways are preloaded to provide zero clearance between
the moving surfaces. This increases rigidity and stiffness in all directions, while
providing higher accuracy and reliability. Box ways require clearance between
the moving surfaces in order to operate. Recirculating ball guides have a very low
coefficient of friction, allowing faster movements without sacrificing repeatability
or positioning accuracy. Box ways have a high coefficient of friction, resulting in
stick-slip effects that can lead to machine errors.
Automatic Lubrication
Haas Direct-Coupled
Servomotors
The Haas automatic lubrication system meters
and distributes oil to guideways and ballscrews as
the machine operates. This ensures that all critical
components are lubricated with the correct
amount of oil at all times,
saving time and reducing
maintenance costs.
Our servomotors are coupled
directly to the ballscrews with
steel disc couplings to eliminate
windup, even under severe loading.
This greatly improves positioning
accuracy, and provides more
accurate threading and contouring.
And they don’t wear out or lose
accuracy over time.
7
Main Spindle Features
Powerful Vector
Spindle Drives
The Haas-designed vector spindle
drive uses closed-loop, digital servo
technology to provide precise speed
control and peak performance under
heavy cutting loads. The system
optimizes the slip angle between
the rotor and stator of the spindle
motor to greatly increase low-speed
torque and accelerations, resulting
in the fastest, most powerful spindle
ever. These drives allow you to push
the spindle to 150 percent of the
motor’s continuous power rating for
15 minutes, and to 200 percent for
5 minutes. That’s more performance
headroom than other spindle drives
on the market.
Spindle Configurations
Model
40 TAPER
TM
MM
VF-1
VF-2
VF-3
VF-4
VF-5
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
VM
VR
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50 TAPER
•
2-SPEED GEARBOX
4,000 / 5,000 RPM *
6,000 RPM *
•
30,000 RPM *
•
GR
MDC
•
•
• (5K)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
12,000 RPM *
15,000 RPM *
•
• (4K)
7,500 RPM
10,000 RPM
HIGH10,000
RPM *
TORQUE
•
VS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*Not available on 50-taper machines. Gearbox standard w/50-taper spindle. Gearbox not compatible with all spindle options. All machines available in CT or BT.
See model guide on pages 22 – 23.
8
High-Capacity Cartridge Spindle (above)
On-The-Fly WYE-DELTA Switching
The advanced design of our spindles provides high axialthrust capability, yet generates minimal heat. The front and
rear bores of the housing and the OD of the spindle are
finished in one operation. This guarantees perfect alignment
between the bores and ODs, thus reducing bearing heat.
Many Haas VMCs feature the Haas Dual-Drive
system, which consists of a dual-winding motor
– Wye and Delta – and an electronic switch to
change between the two windings. Selecting the
best winding for low-rpm cutting and the best
winding for high-rpm cutting yields higher torque
over a wider rpm range. On-the-fly switching
maximizes acceleration/deceleration rates for more
chip making and less waiting.
PEAK POWER
Our spindles use pre-loaded angular-contact bearings
throughout, with the two forward bearings separated by
a large spacer to enhance radial stability – enabling heavy
cuts in steel. To ensure long life, the spindle is pressurized
with air to prevent coolant contamination, and an air/
oil mixture is injected automatically at preset intervals to
ensure precise lubrication and long bearing life.
RPM
Typical power curve
Enhanced power range with on-the-fly Wye-Delta
The cartridge design of the Haas spindle simplifies service by allowing quick
changeout of the entire spindle.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
9
Main Spindle Features
Belt Drive
Inline Drive
Gear Drive
The standard configuration for many
40-taper VMCs is a Haas-built cartridge
spindle that is driven by the motor via
belt. This provides a good combination
of torque and rpm for a wide selection
of machining operations. It is a great
overall value.
The most advanced Haas spindle
design is an innovative 12,000-rpm,
inline direct-drive spindle that is
coupled directly to the motor. This
provides super-smooth operation for
excellent surface finishes, and reduces
operating heat for greater thermal
stability. (Available only on VM & SS models.)
The Haas geared-head spindle
provides increased low-end torque
for heavy cutting, while retaining the
ability to run up to 10,000 rpm for highspeed machining. It is standard on
50-taper machines, providing 450
ft-lb of torque, and optional on 40taper machines, providing 250 ft-lb of
torque.
Vibration-Isolated Gearbox
Synchronized Tapping
Haas has invested more than
$4 million in the finest gearmaking and inspection equipment
in the world. Haas gears are CNC
machined and hobbed out of 8620
steel, heat-treated to 60 Rc, and
then precision CNC ground to
AGMA Class 13 quality. A drysump oiling system circulates oil
to all vital areas of the gearbox,
and polyurethane mounts eliminate vibrations that could
show up on finishing passes.
Using an encoder
attached directly to the
Haas high-performance
spindle, Z-axis motion
is synchronized with
the spindle’s rotation.
Synchronized tapping
eliminates the need for
expensive, floating tap
holders, and prevents
lead-thread distortion and start-thread pullout. Also,
the tap can reverse out of a rigid-tapped hole faster
than it went in, which can reduce cycle times.
(Standard on all machines except GR, Mini Mill and Toolroom Mill.)
Specifications subject to change without notice. Not responsible for typographical errors.
10
Spindle Head
Thermal Stability
Enhancements
An independent jacket in our head
casting surrounds the spindle. Coolant is
circulated through this jacket to remove heat
generated by the spindle. This minimizes
thermal distortion of the head, eliminating
Y- and Z- axis changes. Because the coolant
touches all parts of the machining area, it
accurately reflects the overall temperature of
the machine.
To improve thermal stability further, we’ve
insulated the head and increased the air flow
through the spindle-head assembly. Cool air
enters from the rear of the machine, flows
around the spindle and exits at the top, away
from the spindle head.
A spindle chiller is also available for
VF-1 through VF-11 40-taper models. This
option keeps the spindle head at a constant
temperature, even during dry machining.
0.00140
0.00100
Z Axis
Temp.
Room Temperature
Y Axis
0.00060
0.00020
0.00000
-0.00020
-0.00060
-0.00100
70º
Spindle
RPM
The chart at right shows an 8-hour thermal test of a Haas
Super-Speed VMC with inline, direct-drive spindle. The
bottom shows spindle speed changes during the test, and
the top shows thermal changes in the spindle head over
the 8 hours. The test was performed in an uncontrolled
environment. During the test, the ambient temperature
increased from 71º F (22º C) to almost 75 º F (24º C), with
virtually no affect on the spindle head.
75º
X Axis
-0.00140
10,000
6,000
2,000
1
Note: These test results are provided as an example only. Actual results will vary based on the
cutting conditions and environmental conditions during measurement.
Movement (Inches)
Spindle Head Thermal Control
2
3
4
5
6
7
8
Machine Operation Time (Hours)
More Spindle Torque
Cutting performance and material
removal rates are a product of torque, speed
and power. These charts show two of the
enhanced-performance options you can add
to your Haas VMC. The one at left shows
a gear-driven, 7,500-rpm spindle, and the
chart at right shows a gear-driven, hightorque, 10,000-rpm spindle.
Note: Charts reflect performance with optional 2-speed gearbox.
See model guide on pages 22-23.
11
Tool Changing
Economical
Electronic Tool
Changer
The standard Haas 40-taper
tool changer is an economical
choice for cost-conscious shops. A
sinusoidal motion arm accelerates
and decelerates the shuttle for
smooth operation, and each
pocket has a retractable cover that
prevents chips from entering the
changer and sticking on the tool
tapers. Simple design and minimal
moving parts guarantee long life
and reliable service.
(Standard on Mini Mill and VF-1 through VF-5
40-taper models. VF-6 through VF-11 and all
50-taper models come standard with a side-mount
tool changer.)
Tool Changer Specifications
Tool Changer Type
# Tools
Machine Models
Tool-to-Tool
Chip-to-Chip
Max Diameter
full (adj empty)
40-taper umbrella-style
20
VF-1 thru VF-5
4.2 sec
4.5 sec
3.5"
40-taper side-mount
24+1
VF-2SS thru VF-6SS
1.6 sec
2.2 sec
3" ( 5" )
40-taper side-mount
24+1
VF-6 thru VF-11
2.8 sec
3.6 sec
3" ( 6" )
50-taper side-mount
30+1
VF-5/50 thru VF-11/50
4.2 sec
6.3 sec
4" ( 10"1 )
40-taper side-mount
24+1
VF-1 thru VF-5
2.8 sec
3.6 sec
3" ( 5"2 )
40-taper side-mount
40+1
VF-2YT thru VF-11
2.8 sec
3.6 sec
3" ( 5"3, 6"4 )
Standard configuration
Optional configuration
1) VF-5/50 max diameter 4" ( 7" )
From concept to reality
The Haas-designed and -built sidemount tool changer symbolizes our
focus on in-house design, development
and manufacturing. It’s the best way
to ensure total control. We use this
approach to refine our processes, control
costs and ensure a consistent high level
of quality in everything we build.
12
2) VF-5/40 max diameter 3" ( 6" )
3) VF-2YT to VF-4
4) VF-5 to VF-11
SMTC
Tool Change Times
as Short as
1.6
SECONDS
(tool to tool)
Inside
The Haas
Side-Mount
Tool Changer
The
synchronized
cycloidal motion of our
side-mount tool changers is
controlled by precision cams
that are manufactured in-house on
custom-built, 5-axis Haas machines.
This rugged, dependable design uses
a special Haas worm-gear drive and an
electronically controlled start/stop system for
long life and maintenance-free operation. Every
Haas SMTC is manufactured completely in-house to
guarantee fast, smooth, reliable operation.
13
Chip Removal
Efficient Free-Flow
Enclosure Design
Haas VMCs provide more uncluttered room
than any other machines in their class. There’s
plenty of space for chips, with no hidden areas
where they can build up. Sloped panels direct
chips to the front of the machine, where the
optional chip auger compresses them, wrings out
the coolant and conveniently discharges them at
the side of the machine.
Chip Auger
People buy CNC machines to make parts
faster. The last thing they want is to waste time
removing chips. Our auger-style chip conveyor
automatically removes chips from the machine,
while compressing them and wringing out the
coolant at the same time. For added reliability,
the system senses torque loads and reverses
automatically if a jam occurs.
14
Coolant Systems
Programmable
Coolant Nozzle (right)
We spent time watching operators
machining parts and noticed they
were constantly opening the doors of
the machine to readjust coolant lines.
Our programmable coolant nozzle is
controlled automatically by the part
program to direct coolant precisely at
the cutting area, eliminating constant
adjustments by the operator. The
nozzle can also be adjusted from the
keypad while a program is running.
Easy-Access, Roll-Out Coolant Tanks
➥
300 psi or 1,000 psi
Through-Spindle Coolant
Our coolant tanks have wheels for
easy removal to facilitate cleaning. A
separate chip basket and lift-out screen
prevent chips from reaching the pump.
All electrical and hose connections at the
tank can be removed by hand, and the
lid and pump can be lifted up and out
without removing any fasteners.
Through-spindle coolant uses an
auxiliary pump to supply coolant
through the tool, directly to the cutting
edge. This increases tool life, allows
higher cutting speeds, and clears chips
during deep-hole drilling and blindpocket milling. Two systems are
available. One provides up to 300 psi to
the cutting edge, and the other provides
up to 1,000 psi. The 1,000-psi system
includes the auxiliary coolant filter
(shown at right). The actual pressure of
both systems will vary with the size of
the coolant passages in the tool.
A 95-gallon coolant tank is standard on the VF-6
through VF-11, and can be added to the VF-1 through
VF-5 to increase the coolant capacity.
Coolant Level Sensor
A sensor in the coolant tank allows
you to monitor coolant level directly
on the control screen, preventing
damaged tools and saving time.
Auxiliary Coolant Filter
This 25-micron, #2 bag-type filter
system removes contamination and
minute particles from the coolant
before they can be recirculated
through the coolant pump.
See page 39 for flow rate details.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
15
Distinctive Machines
Mill Drill Center with Dual Pallet Changer
For high-volume production of small parts, where cycle times
are short and part loading is frequent, keeping non-cutting time to
a minimum is crucial to maintaining a favorable cost per part.
The MDC-500 Mill Drill Center is a state-of-the-art machining
center that provides high-speed drilling and tapping, as well as
full milling capabilities, in an affordable, pallet-changing package
designed to increase a shop’s parts volume.
MDC-500 Travels
X
Y
Z
Load Stations
Table Size
20" (508 mm)
14" (356 mm)
20" (508 mm)
2
20" x 12.75"
(508 x 324 mm)
700 lb
(318 kg)
4.7 sec
Capacity
(per station, balanced load)
Load Station Change Time
Office Mills
Haas Office Mills bring CNC performance and reliability to industries that are unable
to fit a “normal” machine into their facilities. Designed for high-volume production
and/or rapid prototyping of small, high-precision 2D or 3D parts, they’re small enough
to fit through a 36" door, and light enough for most freight elevators.
Specifications
Model
OM-1A
X
8" (203 mm)
12" (305 mm)
Y
8" (203 mm)
10" (254 mm)
Z
12" (305 mm)
Table Size
Spindle Type
OM-2A
12" (305 mm)
20" x 10" (508 x 254 mm)
Haas-built
Haas-built
ISO 20 taper
ISO 20 taper
Spindle Speed
30,000 rpm
30,000 rpm
Toolchanger
20 pocket
Power Required
20 pocket
1-phase – 240V @ 20A
Automatic Pallet Changer System
Pallet Size (all models)
X 40" (1016 mm)
Y
19" (483 mm)
Max Pallet Load
1,000 lb (454 kg)
Clamping Force
14,900 lb @ 85 psi
(66279 N @ 5.86 bar)
Increase productivity and run unattended with
a Haas VF-3 or VF-4 with automatic pallet changer
(APC). The Haas APC is a side-loading pallet
changer featuring 40" x 19" steel pallets. Nonmachining tasks, such as fixture setups and part
changeovers, can be performed off-line on one
pallet while parts are being machined on another.
16
Operator Convenience Features
➭
➭
Tool Rack System
This versatile rack provides
convenient storage for
toolholders, cutting tools
and accessories right at the
machine, eliminating the need
for a separate tool cart. The
system comes with one rack, a
shelf and a storage box; extra
racks are available.
Storage Area
Another operator-focused
feature is this convenient
“glove box” below the
pendant. The hinged door
folds down to form a handy
shelf, and closes securely to
keep items out of sight.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
17
Operator Convenience Features
Automatic Air Gun
Provides a constant blast of air to the cutting tool to clear
chips during dry machining. Activated by M code, the air
gun can be programmed to turn on while the spindle is
turning, or at the end of a cycle. Air consumption for the
auto air gun is 6 scfm.
Dust Extraction System
This system removes dust and particulates generated
when machining materials such as graphite and
wood, preventing contamination of critical machine
components. Powerful suction draws dust away
from the tool and into an external collection unit. To
keep abrasive particles from reaching critical motion
components, the machine’s casting assemblies are
pressurized. (Available on VF-1 and VF-2.)
Servo Auto Door
This option opens and closes the machine doors
automatically via the part program. This reduces
operator fatigue during repetitive machining
operations, or allows for unattended operation
when used with a robotic loader. (Available on VF-1
through VF-5.)
Door-Activated High-Intensity Lighting
Halogen lights provide bright, even illumination
of the work area for part inspection, job set up and
changeovers. Lights turn on and off automatically
when doors open and close, or can be activated
manually via a switch on the lights.
Specifications subject to change without notice. Not responsible for typographical errors.
18
Haas Wireless
Intuitive Probing
System
The Haas Wireless Intuitive Probing System (WIPS),
with optical transmission for part setting, tool setting and
inspection, consists of the following elements:
• Spindle Probe Module
(work probe)
• Tool Setter Module (tool probe)
• Intuitive Probing System
Sofware
The Haas Wireless Intuitive
Probing System makes probing
easy to understand and use through
simple language, a graphical
interface and clear instructions.
Step-by-step graphical instructions
show machine operators how to set
up the probing cycles.
The Haas Intuitive Probing System software guides the
operator through the probing set-up process, prompting
them to enter each necessary dimension.
Once all dimensions are entered, the operator executes
the probing cycle by pushing the Cycle Start button. The
probing cycle can then be saved in memory, and recalled
when needed.
With the Haas Intuitive Probing System, no knowledge
of G-code programming is needed to use the probing
system.
WIPS is available as a factory-installed option on most new
Haas VMCs.
Waste Oil/Coolant
Separator
Work Probe Features
• Excellent repeatability
• Cycle-time reduction
• High protection against coolant
• High reliability
• High performance
• Easy and intuitive programming of measuring cycles
During normal
operation, tramp oil and
coolant can collect inside
a machine’s base casting.
This unit removes the
oil before it can enter the
machine’s coolant
system.
Tool Probe Features
• Excellent repeatability
• Cycle-time reduction
• High protection against coolant
• High reliability
• High performance
• Easy and intuitive programming of measuring cycles
19
Performance Enhancements
5-Axis Trunnion Machines
Model
5-Axis Trunnion
The Haas Trunnion Series machines are versatile 5-axis
machining centers that provide full, simultaneous 5-axis
motion for machining complex parts, or can position a
workpiece to almost any angle for multi-side machining.
Super Speed
Mold Making
The VF-5TR and VF-6TR have a dual-axis trunnion table
mounted directly to the bearing trucks in place of the
standard T-slot table, which increases rigidity and provides
good Z-axis clearance. Both machines are available in 40or 50-taper configurations. The VF-2TR has the dual-axis
trunnion mounted directly to the standard T-slot table,
which provides the flexibility to run the machine with or
without the trunnion table installed.
FEATURES
• Dual-Axis Table
• 16 MB Program Memory
• ±120° Tilt, 360° Rotation
• USB Port
• Side-Mount Tool Changer
• Remote Jog Handle
• Automatic Chip Auger
• High-Speed Machining
w/Look-Ahead
• Programmable Coolant
Nozzle
• User-Definable Macros
20
VF-2
•
•
VF-3 VM-2 VM-3 VM-6 VF-4 VF-5 VF-6
•
•
•
•
•
•
•
•
•
VF-SS Super-Speed VMCs
– Affordable High-Speed
Performance
The VM Series – Speed
and Accuracy for the Mold
Making Industry
The Haas VF-2SS, VF-3SS, VF-4SS, VF-5SS and VF-6SS
high-performance vertical machining centers come standard
with an innovative 12,000-rpm, inline direct-drive spindle, an
ultra-fast side-mount tool changer and high-speed rapids for
reduced cycle times.
Designed specifically for mold makers, the VM-2,
VM-3 and VM-6 feature the Haas 12,000-rpm, inline
direct-drive spindle, a unique 40-taper design that
provides superior surface finishes, excellent thermal
stability and quiet operation. VM machines come
standard with an automatic chip auger, remote jog
handle, automatic air gun, high-speed machining, hard
drive with Ethernet interface, USB port, user-definable
macros, programmable coolant nozzle and more.
The all-around enhanced performance of the Super-Speed
machines yields shorter cycle times and more parts per shift,
making them some of the more popular innovations offered
by Haas Automation.
A unique, multi-fixture table provides T-slots in
both X and Y directions, as well as drilled and tapped
holes and precision dowel-pin bores.
21
Toolroom
Office Mills
Vertical Machining Center Product Line
VM-3
TM-1P
VM-6
TM-2
TM-3
VF-2TR
MDC-500
40-taper
VM-2
TM-1
5 Axis
OM-2A
Mill Drill Center
Mold Machine
OM-1A
VF-1
VF-2
VF-3
VF-4
VF-5
VF-6
Extended X available
50-taper
Extended Y available
VF-3YT/50
VF-5/50
VF-6/50
VF-7/50
VF-8/50
VF-9/50
Super Speed
Extended X available
VF-2SS
VF-3SS
VF-4SS
VF-5SS
VF-6SS
Gantry
Extended Y available
SR-100
GR-510
GR-712
Extended Z axis available
Machine
Travels
Office Mills
40-Taper Standard VMCs
OM-1A
OM-2A
VF-1
VF-1YT
VF-2
VF-2YT
VF-3
VF-3YT
VF-4
VF-5
VF-5XT
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
8"x8"x12" (xyz) 203x203x305 mm
12"x10"x12" (xyz) 305x254x305 mm
Toolroom Mills
TM-1
TM-1P
TM-2
TM-3
30"x12"x16" (xyz) 762x305x406 mm
30"x12"x16" (xyz) 762x305x406 mm
40"x16"x16" (xyz) 1 016x406x406 mm
40"x20"x16" (xyz) 1 016x508x406 mm
Mini VMCs
Mini Mill
16"x12"x10" (xyz) 406x305x254 mm
Mini Mill 2 20"x16"x14" (xyz) 508x406x356 mm
Super Mini Mill 16"x12"x10" (xyz) 406x305x254 mm
Super MM 2 20"x16"x14" (xyz) 508x406x356 mm
20"x16"x20" (xyz) 508x406x508 mm
20"x20"x20" (xyz) 508x508x508 mm
30"x16"x20" (xyz) 762x406x508 mm
30"x20"x20" (xyz) 762x508x508 mm
40"x20"x25" (xyz) 1 016x508x635 mm
40"x26"x25" (xyz) 1 016x660x635 mm
50"x20"x25" (xyz) 1 270x508x635 mm
50"x26"x25" (xyz) 1 270x660x635 mm
60"x26"x25" (xyz) 1 524x660x635 mm
64"x32"x30" (xyz) 1 626x813x762 mm
84"x32"x30" (xyz) 2 134x813x762 mm
64"x40"x30" (xyz) 1 626x1 016x762 mm
84"x40"x30" (xyz) 2 134x1 016x762 mm
120"x32"x30" (xyz) 3 048x813x762 mm
120"x40"x30" (xyz) 3 048x1 016x762 mm
Machines shown with optional equipment.
22
w/APCs
Mini
VF-3APC | VF-4APC
Mini Mill
VF-5TR | VF-5/50TR
Super Mini Mill
Mini Mill 2
VR-8
VF-6TR | VF-6/50TR
VF-7
VF-8
VR-11
VF-9
VF-10
VF-11
VF-11/50
Large
VF-10/50
APC also available in SS models.
Super Mini Mill 2
VS-1
50-Taper Standard VMCs
VF-3YT/50
VF-5/50
VF-5/50XT
VF-6/50
VF-7/50
VF-8/50
VF-9/50
VF-10/50
VF-11/50
40"x26"x25" (xyz) 1 016x660x635 mm
50"x26"x25" (xyz) 1 270x660x635 mm
60"x26"x25" (xyz) 1 524x660x635 mm
64"x32"x30" (xyz) 1 626x813x762 mm
84"x32"x30" (xyz) 2 134x813x762 mm
64"x40"x30" (xyz) 1 626x1 016x762 mm
84"x40"x30" (xyz) 2 134x1 016x762 mm
120"x32"x30" (xyz) 3 048x813x762 mm
120"x40"x30" (xyz) 3 048x1 016x762 mm
Large Capacity VMCs
VS-1
VS-3
84"x50"x50" (xyz) 2 134x1 270x1 270 mm
150"x50"x50" (xyz) 3 810x1 270x1 270 mm
5-Axis VMCs
VF-2TR
VF-5TR
VF-5/50TR
30"x16"x20" (xyz) 762x406x508 mm
38"x26"x25" (xyz) 965x660x635 mm
38"x26"x25" (xyz) 965x660x635 mm
VS-3
VF-6TR
VF-6/50TR
VR-8
VR-11
64"x32"x30" (xyz) 1 626x813x762 mm
64"x32"x30" (xyz) 1 626x813x762 mm
64"x40"x30" (xyz) 1 626x1 016x762 mm
120"x40"x30" (xyz) 3 048x1 016x762 mm
VMCs with APC
VF-3APC
VF-3SSAPC
VF-4APC
VF-4SSAPC
(Automatic Pallet Changer)
40"x20"x25" (xyz) 1 016x508x635 mm
40"x20"x25" (xyz) 1 016x508x635 mm
50"x20"x25" (xyz) 1 270x508x635 mm
50"x20"x25" (xyz) 1 270x508x635 mm
Gantry
SR-100
GR-510
GR-712
Mold Machines
VM-2
VM-3
VM-6
VF-2SS
VF-2SSYT
VF-3SS
VF-3SSYT
VF-4SS
VF-5SS
VF-6SS
30"x16"x20" (xyz) 762x406x508 mm
30"x20"x20" (xyz) 762x508x508 mm
40"x20"x25" (xyz) 1 016x508x635 mm
40"x26"x25" (xyz) 1 016x660x635 mm
50"x20"x25" (xyz) 1 270x508x635 mm
50"x26"x25" (xyz) 1 270x660x635 mm
64"x32"x30" (xyz) 1 626x813x762 mm
23
30"x20"x20" (xyz) 762x508x508 mm
40"x26"x25" (xyz) 1 016x660x635 mm
64"x32"x30" (xyz) 1 626x813x762 mm
Mill Drill Center
MDC-500
Super-Speed VMCs
100"x52"x8" (xyz) 2 540x1 321x203 mm
121"x61"x11" (xyz) 3 073x1 549x279 mm
145"x85"x11" (xyz) 3 683x2 159x279 mm
20"x14"x20" (xyz) 508x356x508 mm
Rotary Tables & Indexers
4TH- AND 5TH-AXIS OPTIONS
Adding a fully integrated 4th- or 5th-axis Haas brushless rotary table to
your Haas VMC creates a supercharged machining center package that boosts
your productivity and reduces setups. Fully synchronized 4th- and 5th-axis
configurations are available on most Haas VMC models.
Earlier brush-style Haas rotary tables may be used on new VMCs with an
adapter kit. Contact Haas or your local Haas Factory Outlet for details.
Above: A complex impeller being created on a Haas mill using a dual-axis
trunnion table and 5-axis simultaneous motion.
Specifications subject to change without notice. Not responsible for typographical errors.
24
SCOLCR
SC02-ACR
HA5C
Servo Control
Rotary Tables & Indexers Product Line
HA5C
HA5C 2
HA5C 3
HA5C 4
T5C
HA5CSB
T5C 2
T5C 3
T5C 4
HRT
T5C
HRT110
HRT160
HRT210
HRT310
HRT320/FB
HRT450
HRT600
HRT A
HRT SP
HRT210HS also available
HRT210SP
HRT310SP
HRTA5
HRTA6
HRT SHS
HRT Dual
HRT160SP
HRT210SHS-HD
HRT210-2
TRT
HRT160-2
TRT210
TRUNNION
TRT160
TR110
TR160
TR210
TR310
Dual-platter TR160-2 also available
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
25
The Haas Control
LED Beacon Light
The Haas-designed beacon light features
ultra-bright LEDs that can easily be seen from
anywhere in the shop. The LEDs generate very
little heat and have a life expectancy of more
than 10 years.
15" Color LCD Screen
Our full-color, 15" TFT LCD display is designed
to work in the machine shop environment. The
high-intensity, high-contrast LCD features a very
wide viewing angle, and will not fade out in bright
light. The panel is mounted behind anti-glare,
tempered glass for protection and easy viewing.
USB Port
The built-in USB port allows the use of
customer-supplied USB flash memory devices.
Multi-Function
Jog Handle
Most machines use the jog handle only to
move the axes around. On Haas machines, the
jog handle can also be used in other modes to
cursor through the program for faster editing,
override spindle speeds and feedrates, or scan
through offsets, parameters, etc.
Advanced Program Editing
A unique feature of the Haas control is an
advanced program editor that allows the operator
to edit programs in a dual-window format.
Dedicated Keypad
One-Button Features
Common multi-step functions, such as powering up the machine or
setting tool offsets, have been reduced to the push of a single button. Other
often-used functions, such as setting part zeros, homing the machine and
selecting the next tool during set up, are also one-button commands.
Dedicated Closed System
Our focus is to provide Haas users with a robust, dependable control that
is seamlessly integrated with the machine. Our closed system is not reliant
on PC-based controls or third-party NC suppliers. When you call Haas, you
get a company that takes full responsibility for the entire machine.
The Haas keypad has more than 130 keys.
All common functions, including a full
alphanumeric keypad, are clearly labeled for
operator ease. If you’ve ever fumbled with hot
keys, or had to page through screens looking
for a specific function, then you will appreciate
the simplicity of the Haas control. There are
no encrypted codes to memorize, and many
functions can be performed simply with the
push of a single button.
Stainless Steel Bezel
Constructed of heavy-gauge T304 stainless
steel with a fine-grained finish, the bezel of the
Haas control not only looks great, it’s also easy
to clean, resists wear and will not corrode. (Not
available on all machines.)
Specifications subject to change without notice. Not responsible for typographical errors.
26
Control Features
■
User friendly
■
Advanced program editor
■
Brushless AC servo drives
■
Up to 833 ipm cutting feedrates
■
Triple 32-bit processors
■
Executes up to 1,000 blocks/second
■
ISO standard G-code compatibility
■
Haas one-button power-up
■
Haas one-button tool offset entry
■
200 tool offsets
■
105 work coordinates
■
Tool load monitoring
■
Tool life management
■
Helical interpolation
■
Background editing
■
Split-screen program review
■
Trig calculator
■
Tangent calculators
■
Speeds and feeds calculator
■
Arc calculator
■
RS-232 / DNC link / USB / optional Ethernet
■
Mid-program restart
■
Inch or metric programming
■
Message page
■
Selectable languages
■
Self-diagnostics
■
Fully descriptive alarms
■
Programmable mirror imaging
■
Advanced pocket milling
■
Bolt-hole drilling
■
Graphic dry run
■
5 spare M functions
■
Contour accuracy control
■
Text engraving
■
Made in the USA
Control Specifications
General
Microprocessor
Program execution speed
Axis control
Interpolation
Min. input increment
Min. output resolution
Feed Functions
Rapid Traverse Override
Feedrate Override
Jog Handle Resolution
Triple high-speed 32-bit
1,000 blocks/sec standard
3 axes linear, 4th and 5th axes optional
G01, G02, G03, helical
– inch mode 0.0001"
– metric mode 0.001 mm
0.0000072" (0.000 18 mm)
Zero Return
5%, 25%, 50%, 100%
0% to 999% in 1% increments
– inch mode 0.0001"/0.001"/0.01"/0.1" per handle division
– metric mode 0.001/0.01/0.1/1.0 mm per handle division
– inch mode 0.1/1.0/10.0/100.0 ipm
– metric mode 1.0/10/100/1000 mm/min.
One key (G28)
Spindle Functions
Speed Command
Override
S = 1 to max spindle rpm
0% to 999% in 1% increments
Tool Functions
Length Compensation
Diameter/Radius Compensation
Length Measurement
Life Management
Selection
200 sets, geometry & wear
200 sets, geometry & wear
Automatic length storage
200 sets w/alarms
Txx command
Programming
Compatibility
Positioning
Canned Cycles
Circular Pocket Milling
Bolt-Hole Drilling
Advanced Pocket Milling
Inch/Metric
Work Coordinates
Part Zero Set
M Code Outputs
2D Cutter Diameter Compensation
2D Cutter Length Compensation
3D+ Cutter Diameter Compensation
5-Axis Tool Length Compensation
ISO standard G code
Absolute (G90), incremental (G91)
22 functions standard
G12, G13
G70, G71, G72
G150
Switchable
105 sets
Automatic storage
5 spare †
G40, G41, G42
G43, G44, G49
G141
G143
Data Input/Output
Communications Port
Data Rate
RS-232, USB
To 115,200 baud ‡
Memory Capacity
Standard
Number of Programs
1 MB; up to 16 MB optional
500
Jog Feeds
† May be used by options. ‡ With 6' or shorter cable.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
27
Intuitive Programming System
Simple, intuitive and more powerful than ever
Thanks to Haas’ Intuitive Programming System, it’s no
longer necessary for a machine operator to know G code
to perform basic milling operations. The IPS software
comes standard on our Toolroom Mills, and is optional on
all other Haas vertical machining centers.
The Haas Intuitive Programming System is a proprietary
conversational operating system that uses an easy-tounderstand tabbed format with full-color graphics to
guide the operator through the steps necessary to machine
a part. First, the control leads the operator through basic
job setup: setting tool and work offsets, selecting the
tool type and specifying the material being cut. The
operator then selects an operation to perform and fills
in basic information as prompted. Default values are
automatically filled in for spindle speed, depth of cut
and feedrate based on the information provided, but the
operator can change these conservative values if desired.
Once all necessary information is entered, pushing Cycle
Start performs the desired operation. Multiple operations
can be recorded and saved as a single G-code program that
can be played back to duplicate the part. This program can
be transferred to any other Haas VMC and run without
editing. Help menus are available directly on screen, and
a graphic dry-run feature allows operators to check their
work before running a part.
Novice operators quickly learn both basic programming
and the finer points of using the Haas control by working
with the Intuitive Programming System.
1
Use the top
tab menu
to select
the type of
operation
to perform.
2
Further define
your specific
cutting
operation by
choosing from
the lower set
of tabs.
3
Fill in the
information
when
prompted
by the control
and press Cycle
Start.
Using plain language, simple graphics and easy-to-follow steps, the Haas
Intuitive Programming System guides the operator through the steps necessary
to machine a part.
Hard Drive with
Ethernet Interface
Store and transfer data between your Haas and
a network or PC with the Ethernet connection.
Program files are easily transferred to and from
memory or the internal hard drive, and large
files can be accessed by multiple machines. Highspeed data transfers allow DNC of large files at
up to 1,000 blocks per second. Compatible with
Windows 95, 98, ME, 2000 and XP. Also works
with server versions NT 4.0, 2000 and 2003. IPX/
SPX or TCP/IP protocol. Easily set up from the
control screen.
28
DXF File Import
The G-code vs. conversational programming debate has
been going on for years in the machine tool industry, with
both sides trying to fit all customers and all parts into one
box. The conversational-style camp can’t or won’t see the
merits of a CAM generated G-code program. The CAM
group can never see the advantage of setting up a job and
generating the program quickly at the machine. The fact is,
both methods are reasonable and desirable under the right
conditions. The Haas control is unique in this regard, as it
is very good at both methods of operation, and the addition
of *.dxf import takes it to a new
level of capability.
Haas’ addition of *.dxf import
capability to the Intuitive
Programming System allows a
programmer to simply import a *.dxf file into the Haas
control, select features on the
file – holes, threading, pockets,
islands or contours – and generate the toolpath. The program
output is standard G-code –
easy to understand and edit. By
taking advantage of the editing
functions of the Haas control,
the user can modify features,
change the order of operations
or even conveniently put them
into other programs – all at the
control, without going back to
a computer to repost a CAMgenerated program.
The Haas control provides the best of both G-code and
conversational-style systems. It doesn’t force the user into
one method of operation. The Haas control weaves them
into a simple, coherent control system: Use manual or CAM
generated G-code, or use the Intuitive Programming System or mix them. Use the programming strategy that is best
for the part; the Haas control will accept them all.
Memory Upgrades up to 16 MB
8 M Functions
Allows loading of large programs directly into the machine,
rather than from DNC, for faster feedrates. Battery-powered,
high-speed static RAM is faster than dynamic RAM and
retains data even when the power is turned off.
Adds 8 additional M functions for a total of up to 13 user
interfaces. Use these to activate probes, auxiliary pumps,
clamping devices, part loaders, etc.
USB Port
Memory Lock Keyswitch
Locks memory to prevent program editing by
unauthorized personnel. It can also be used to lock settings,
parameters, offsets and macro variables.
The built-in USB port allows
the use of customer-supplied
USB flash memory devices.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
29
High-Speed Machining
The High-Speed Machining option for
Haas machining centers is a powerful
tool to reduce cycle times and improve
accuracy. Testing on complex 3- to 5-axis
applications has shown drastic reductions
in cycle times, as well as increased accuracy
and smoother motion.
Using a motion algorithm called
“acceleration
before
interpolation,”
combined with up to 80 blocks of lookahead, the HSM option allows contouring
feedrates up to 833 ipm without risk of
distortion to the programmed path. All
programmed motions are accelerated
before interpolation to ensure that the
movement of each axis does not exceed
the acceleration capability of the machine.
The look-ahead algorithm determines the
fastest feedrate at which each stroke
can be blended into the next without
stopping. This results in higher accuracy,
smoother motion and a higher actual
feedrate – even with complex part
geometry.
Many of today’s “high-speed” controls
are either very expensive or require a preprocessing mode or special post, which
is time consuming and alters the G-code
program. The Haas HSM option accepts
ISO standard G code from all major CAM
systems, and is only a fraction of the cost
of other high-speed controls.
HSM BENEFITS
• Greatly reduces
cycle times
• Full look-ahead
up to 80 blocks
• Up to 833 ipm
contouring
• Acceleration before
interpolation
• ISO standard G-code
programming
• Higher accuracy
• Smoother motion
Remote Jog Handle
The patented Haas color remote jog handle
expands the capabilities of our standard
remote jog handle by adding a 2.8" color
graphic display, an 11-button keypad, a
triple-knob motion-control system and a
built-in LED inspection light. You can
set tool and work offsets, jog up to 9 axes,
display machine position, show the current
program running and much more – all from the
jog handle.
Specifications subject to change without notice. Not responsible for typographical errors.
30
4th- and 5th-Axis Control
User-Definable Macros
Allows the use of 4th- and 5th-axis rotary tables for multi-side
machining or machining complex contours and shapes, such as
impellers. Increases productivity and reduces setups.
Create subroutines for custom canned
cycles, probing routines, operator prompting,
math equations or functions, and family-ofparts machining with variables.
Coordinate Rotation/Scaling
Use rotation in conjunction with work offset probing to speed
workpiece set up, or use it to rotate a pattern to another location
or around a circumference, etc. Use scaling to reduce or enlarge a
toolpath or pattern.
Second Home Position
Allows the operator to quickly send the axes to a user-defined
Home position other than the machine’s Home position.
31
Engraving
By using a single block of code, you can
easily engrave any text string enclosed in
parentheses. Sequential part numbers can be
engraved by using the standard serializing
function.
The Hidden Power Inside the
HELP/CALC
The Help function is a built-in, searchable operator’s manual that explains
the various functions of a Haas machine. Simply type in a keyword to quickly
find a specific topic, or hit F1 for G-code help and F2 for M-code help.
The Calculator pages are another powerful tool. There are calculators for
solving triangle equations, circle-circle-tangent equations and circle-linetangent equations, as well as a speeds-and-feeds calculator. Also included
are a standard math calculator, a drill-and-tap chart, a decimal-equivalent
chart and a time-and-date function. These calculators simplify machining
operations and speed math calculations, and the solution to any equation
can easily be pasted into a program directly from the calculators.
The Power of a Single Button
Some of the most powerful features of the Haas control – features that every machinist will
truly appreciate – take only the push of a single button. For example, you can set tool offsets
with the push of a single button – without having to enter numbers manually into the control.
Simply jog a tool to the surface of the part, push the Tool Offset Measure button, and the
tool’s length is automatically stored in the tool length register. Now, push the Next Tool button
and repeat the process for each tool. That’s it! Setting work offsets is just as easy. These
time-consuming processes have been reduced to a few simple steps, and that’s just two of
the special features inside every
Haas control. Ask your distributor
for a complete demonstration, and
see for yourself how a Haas will
change the way you work.
Specifications subject to change without notice. Not responsible for typographical errors.
32
Tool Load Monitoring
Maximizing tool life is another key to increasing productivity. The Haas
control can monitor the spindle load for each tool and automatically adjust
the feeds for that tool if the load exceeds a limit set by the operator.
If a tool exceeds the preset limit, the control can be set to reduce the
commanded feedrate, alert the operator, go into feed-hold mode or
generate a tool-overload alarm. The first time a program is run, the Haas
control automatically records the highest load seen for each tool. Using
this information and the Tool Load Monitoring feature of the control, the
operator can set load limits for each tool. This maximizes tool life, and
protects the workpiece and machine from the effects of tool wear.
Advanced Tool Management
Haas Control
To maximize productivity, the Haas control has an integrated Advanced
Tool Manager that allows you to create a group of redundant tools for use
within a program. From a single screen, you can view the different tool
groups and their parameters. Simply define which tool numbers are part of
a group, and what parameter will determine when to change to a redundant
tool. This can be based on feed time, the number of tool calls,
the number of holes drilled or tapped, or a preset load limit.
To use a group of redundant tools in a program, simply
enter the group number as your tool call-out. The
tool offsets you defined during set up will
automatically be loaded for each tool as it’s
called up.
SETNG /GRAPH
CURNT/COMDS
Push this button to access the Settings pages of the Haas control,
where you’ll find a wide selection of operator-definable preferences.
Use these settings to optimize the way you work. You can set program
restarts and automatic power-off, select languages and units of measure,
lock out overrides and parameters, access special features like electronic
thermal compensation and much more. The Graphics page provides a 2D
representation of the programmed toolpath. Use this graphic dry run to
identify possible problems and avoid mishaps.
The Current Commands page displays the current running status of the
machine, including the current program running, the current position, which
tool is in the spindle, the spindle and axis loads, the current spindle speed
and the feedrate. Additional screens show which commands and G code are
being used in the current program; and a timer shows cycle time, cutting
time, power-on time and M30 count (number of parts). Other displays show
which macro variables are being used, provide tool-life information, and
show the minimum and maximum spindle load for each tool.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
33
Machine Configurations & Options
▲ = Available configuration ● = Standard on 40-taper machines ❍ = Optional on 40-taper machines ■ = Standard on 50-taper machines ❑ = Optional on 50-taper machines
SPINDLE CONFIGURATIONS
TM
MM
VF-1
VF-2
VF-3
VF-4
VF-5
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
VM
VR
40-TAPER SPINDLE
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
❍
❍
❍
❍
❍■
❍■
❍■
❍■
❍■
❍■
❍■
■
50-TAPER SPINDLE
2-SPEED GEARBOX
VS
GR
MDC
SS
▲
▲
▲
CT SPINDLE
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
BT SPINDLE
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
❍
5,000 RPM
▲
10,000 RPM
HIGH-TORQUE 10,000 RPM
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
15,000 RPM
30,000 RPM
TM
MM
24-POCKET SMTC
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
VF-1
VF-2
VF-3
❍
❍
❍
VF-4
VF-5
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
VM
❍
❍
●
●
●
●
●
●
●
■
■
■
■
■
■
■
30-POCKET SMTC
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
VF-4
VF-5
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
VM
SUPER-SPEED MODEL
▲
▲
▲
▲
▲
5-AXIS TRUNNION MODEL
▲
▲
▲
TM
TM
MM
MM
AUTO AIR GUN
❍
AUX. COOLANT FILTER
VF-1
❍
AUTOMATIC CHIP AUGER
DUST EXTRACTION SYSTEM
VF-2
VF-3
VF-4
VF-5
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
●
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
▲
▲
❍
❍
❍■
●■
●■
●■
●■
●■
●■
❍
❍
❍
❍
▲
▲
❍
EXTENDED Z AXIS
EXTENDED Y AXIS
VS
❍
GR
MDC
SS
●
●
MDC
SS
❍
VR
VS
GR
●
VF-1
AUTO PALLET CHANGER
VR
❍
■
VF-3
SPECIAL OPTIONS
❍
●
❍
VF-2
40-POCKET SMTC
SPECIAL MACHINES
❑
●
12,000 RPM
TOOL CHANGERS
❍
VM
VR
VS
❍
❍
❑
●
●
■
GR
MDC
❍
❍
SS
❍
❍
❍
●
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍
▲
❍
▲
EXTENDED X AXIS
95-GALLON COOLANT TANK
❍
❍
❍
❍
❍
●■
●■
●■
●■
●■
●■
❍
●
■
❍
LINEAR SCALES
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❍
■*
❍
❍
❍
❍
❍
❍
❍■
●■
●■
●■
●■
●■
●■
●
●
❑
❍
❍
❍
THROUGH-SPINDLE COOLANT
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❍
❑
❍
❍
❍
EXTRA RAPID TRAVERSE
▲
❍
❍
❍
❍
❍❑
❍❑
HIGH-INTENSITY LIGHTING
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❍
BASIC SPINDLE CHILLER
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
AUTOMATIC DOOR
❍
❍
❍
❍
❍ ❑
PROGRAMMABLE COOLANT
❍
❍
CONTROL OPTIONS
TM
MM
VF-1
VF-2
VF-3
VF-4
VF-5
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
VM
VR
VS
GR
MDC
SS
EXPANDED MEMORY
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
●
●
❑
❍
❍
❍
4TH-AXIS DRIVE
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❑
❍
❍
❍
5TH-AXIS DRIVE
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❑
❍
❍
❍
8 ADDITIONAL M FUNCTIONS
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❍
❑
❍
❍
❍
COORD. ROTATION/SCALING
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
●
❍
❑
❍
❍
❍
HARD DISK/ETHERNET
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
●
❍
❑
❍
❍
❍
RIGID TAPPING
❍
❍
●
●
●
●
●■
●■
●■
●■
●■
●■
●■
●
●
■
❍
●
●
HIGH-SPEED MACHINING
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
●
●
❑
❍
❍
❍
USER-DEFINABLE MACROS
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
●
❍
❑
❍
❍
❍
❍
❍
❍
❍
❍
❍■
●■
●■
●■
●■
●■
●■
●
●
■
❍
❍
❍
SPINDLE ORIENTATION
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
●
❍
❑
❍
❍
❍
INTUITIVE PROGRAMMING
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❍
❑
❍
❍
❍
TOOL & PART PROBING
❍
❍
❍
❍
❍
❍
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍❑
❍
❍
❑
❍
❍
❍
REMOTE JOG HANDLE
Important: The above chart represents the standard configurations of machines distributed in North America. Machine configurations and availability may differ for other countries and regions.
This chart is for reference only. Check with your local Haas distributor for exact pricing, configuration and availability of machines and options. *X-axis scale only.
34
Machine Dimensions
A
D
B (max)
Y
Z
W
C
X
E
0.640"
16.3 mm
0.630"
16 mm
L
F
M
H
K
1.06"
26.9 mm
G
0.42"
10.7 mm
J
I
Side View
A
B (40 Taper)
B (50 Taper)
C
D
Front View
E
F
G
H
I (Door Opening)
J
K
L
M
Table
W
X
Y
Z
T-Slots
Number on Table
VF-1
92.80"
2357 mm
104.50"
2654 mm
–
VF-2
92.80"
2357 mm
104.50"
2654 mm
–
VF-3
110.00"
2794 mm
117.50"
2985 mm
–
VF-4
110.00"
2794 mm
117.50"
2985 mm
–
58.00"
1473 mm
36.00"
914 mm
VF-1
88.00"
2235 mm
64.00"
1626 mm
42.95"
1091 mm
32.00"
813 mm
35.50"
902 mm
30.00"
762 mm
27.54"
700 mm
21.81"
554 mm
33.00"
838 mm
VF-1
2.08"
52.8 mm
26.00"
660 mm
14.00"
356 mm
4.92"
125.0 mm
VF-1
3
58.00"
1473 mm
36.00"
914 mm
VF-2
88.00"
2235 mm
64.00"
1626 mm
42.95"
1091 mm
32.00"
813 mm
35.50"
902 mm
30.00"
762 mm
27.54"
700 mm
21.81"
554 mm
33.00"
838 mm
VF-2
2.08"
52.8 mm
36.00"
914 mm
14.00"
356 mm
4.92"
125.0 mm
VF-2
3
74.40"
1890 mm
36.00"
914 mm
VF-3
122.00"
3099 mm
67.20"
1707 mm
46.15"
1172 mm
30.30"
770 mm
48.50"
1232 mm
42.50"
1080 mm
27.31"
694 mm
20.86"
530 mm
36.50"
927 mm
VF-3
2.70"
68.6 mm
48.00"
1219 mm
18.00"
457 mm
3.15"
80.0 mm
VF-3
5
74.40"
1890 mm
36.00"
914 mm
VF-4
122.00"
3099 mm
67.20"
1707 mm
46.15"
1172 mm
30.30"
770 mm
48.50"
1232 mm
42.50"
1080 mm
27.31"
694 mm
20.86"
530 mm
36.50"
927 mm
VF-4
2.70"
68.6 mm
52.00"
1321 mm
18.00"
457 mm
3.15"
80.0 mm
VF-4
5
VF-5
114.00"
2895 mm
118.20"
3002 mm
126.50"
3213 mm
82.88"
2105 mm
36.00"
914 mm
VF-5
137.00"
3480 mm
70.50"
1791 mm
49.15"
1248 mm
33.20"
843 mm
54.00"
1372 mm
42.50"
1080 mm
27.31"
694 mm
11.18"
284 mm
36.50"
927 mm
VF-5
2.05"
52.1 mm
52.00"
1321 mm
23.00"
584 mm
3.15"
80.0 mm
VF-5
7
VF-6
123.00"
3124 mm
124.00"
3150 mm
138.00"
3505 mm
94.00"
2388 mm
30.00"
762 mm
VF-6
156.00"
3962 mm
76.00"
1930 mm
55.15"
1401 mm
33.07"
840 mm
69.00"
1753 mm
60.00"
1524 mm
27.23"
692 mm
21.72"
552 mm
43.00"
1092 mm
VF-6
4.16"
105.7 mm
64.00"
1626 mm
28.00"
711 mm
4.92"
125.0 mm
VF-6
5
VF-7
123.00"
3124 mm
124.00"
3150 mm
138.00"
3505 mm
94.00"
2388 mm
30.00"
762 mm
VF-7
183.00"
4648 mm
76.00"
1930 mm
55.15"
1401 mm
33.07"
840 mm
84.75"
2153 mm
60.00"
1524 mm
27.23"
692 mm
9.30"
236 mm
43.00"
1092 mm
VF-7
4.16"
105.7 mm
84.00"
2134 mm
28.00"
711 mm
4.92"
125.0 mm
VF-7
5
VF-8
139.00"
3531 mm
124.00"
3150 mm
138.00"
3505 mm
110.00"
2794 mm
30.00"
762 mm
VF-8
156.00"
3962 mm
76.00"
1930 mm
55.15"
1401 mm
33.07"
840 mm
69.00"
1753 mm
60.00"
1524 mm
27.23"
692 mm
21.72"
552 mm
43.00"
1092 mm
VF-8
3.24"
82.3 mm
64.00"
1626 mm
36.00"
914 mm
4.92"
125.0 mm
VF-8
7
VF-9
139.00"
3531 mm
124.00"
3150 mm
138.00"
3505 mm
110.00"
2794 mm
30.00"
762 mm
VF-9
183.00"
4648 mm
76.00"
1930 mm
55.15"
1401 mm
33.07"
840 mm
84.75"
2153 mm
60.00"
1524 mm
27.23"
692 mm
9.30"
236 mm
43.00"
1092 mm
VF-9
3.24"
82.3 mm
84.00"
2134 mm
36.00"
914 mm
4.92"
125.0 mm
VF-9
7
VF-10
123.00"
3124 mm
124.00"
3150 mm
138.00"
3505 mm
98.00"
2489 mm
30.00"
762 mm
VF-10
257.00"
6528 mm
76.00"
1930 mm
55.15"
1401 mm
33.07"
840 mm
122.00"
3099 mm
60.00"
1524 mm
21.14"
537 mm
–
VF-11
139.00"
3531 mm
124.00"
3150 mm
138.00"
3505 mm
110.00"
2794 mm
30.00"
762 mm
VF-11
257.00"
6528 mm
76.00"
1930 mm
55.15"
1401 mm
33.07"
840 mm
120.13"
3051 mm
60.00"
1524 mm
21.14"
537 mm
–
43.00"
1092 mm
VF-10
4.16"
105.7 mm
120.00"
3048 mm
28.00"
711 mm
4.92"
125.0 mm
VF-10
5
43.00"
1092 mm
VF-11
4.16"
105.7 mm
120.00"
3048 mm
28.00"
711 mm
4.92"
125.0 mm
VF-11
5
Specifications subject to change without notice. Not responsible for misprints or typographical errors. Note: Overall shipping dimensions vary; contact Haas for details.
35
Machine Specifications (Standard 40-Taper Machines)
VF-1 | VF-1YT
VF-2 | VF-2YT
VF-3 | VF-3YT
VF-4
VF-5 | VF-5XT
X
20"
508 mm
30"
762 mm
40"
1 016 mm
50"
1 270 mm
50" | 60"
1 270 mm | 1 524 mm
Y
16" | 20"
406 mm | 508 mm
16" | 20"
406 mm | 508 mm
20" | 26"
508 mm | 660 mm
20"
508 mm
26"
660 mm
Z
20"
508 mm
20"
508 mm
25"
635 mm
25"
635 mm
25"
635 mm
4 - 24"
102 - 610 mm
4 - 24"
102 - 610 mm
4 - 29"
102 - 737 mm
4 - 29"
102 - 737 mm
7 - 32"
178 - 813 mm
Length
26"
660 mm
36"
914 mm
48" | 54"
1 219 mm | 1372 mm
52"
1 321 mm
52" | 62"
1321 mm | 1 575 mm
Width
14" | 18"
356 mm | 457 mm
14" | 18"
356 mm | 457 mm
18" | 25"
457 mm | 635 mm
18"
457 mm
23"
584 mm
3,000 lb
1 361 kg
3,000 lb
1 361 kg
3,500 lb
1 588 kg
3,500 lb
1 588 kg
4,000 lb
1 814 kg
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
4.92"
125 mm
4.92"
125 mm
3.15"
80 mm
3.15"
80 mm
3.15"
80 mm
Travels
Spindle Nose to Table
Table
Max Weight on Table
T-Slot Width
T-Slot Center Distance
Taper Size
#40 Taper
#40 Taper
#40 Taper
#40 Taper
#40 Taper
7,500 max rpm
7,500 max rpm
7,500 max rpm
7,500 max rpm
7,500 max rpm
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Max Torque Standard
75 ft-lb @ 1,400
102 Nm @ 1400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
with Optional Gearbox
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
Bearing Lubrication
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
20 hp
14.9 kW
20 hp
14.9 kW
20 hp
14.9 kW
20 hp
14.9 kW
20 hp
14.9 kW
(z=4,200 lb) 2,550 lb
(18 683 N) 11 343 N
(z=4,200 lb) 2,550 lb
(18 683 N) 11 343 N
(z=4,200 lb) 2,550 lb
(18 683 N) 11 343 N
(z=4,200 lb) 2,550 lb
(18 683 N) 11 343 N
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
Rapids on X Axis
1,000 ipm
25.4 m/min
1,000 ipm
25.4 m/min
1,000 ipm
25.4 m/min
1,000 ipm
25.4 m/min
710 ipm | 540 ipm
18.0 m/min | 13.7 m/min
Rapids on Y & Z Axes
1,000 ipm
25.4 m/min
1,000 ipm
1,000 ipm | 710 ipm
25.4 m/min 25.4 m/min | 18.0 m/min
1,000 ipm
25.4 m/min
710 ipm
18.0 m/min
Max Cutting
650 ipm
16.5 m/min
650 ipm
16.5 m/min
650 ipm
16.5 m/min
650 ipm
16.5 m/min
500 ipm
12.7 m/min
20 (24+1)
20 (24+1)
20 (24+1, 40+1)
20 (24+1, 40+1)
20 (24+1, 40+1)
CT or BT / 40
CT or BT / 40
CT or BT / 40
CT or BT / 40
CT or BT / 40
3.5" (full)
89 mm
3.5" (full)
89 mm
3.5" (full)
89 mm
3.5" (full)
89 mm
3.5" (full)
89 mm
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
Speed
Drive System
Spindle
Cooling
Spindle Motor Max Rating1
Axis Motors Max Thrust Rating
Axis Motors
Capacity Standard (optional)2
Tool Type / Taper
Max Tool Diameter Standard
(full / adjacent empty)
Tool Changer
Max Tool Weight
Changer Type Standard (Optional)
Accuracy
Carousel (SMTC)
Carousel (SMTC)
Carousel (SMTC)
Carousel (SMTC)
Carousel (SMTC)
Tool to Tool (optional)
4.2 sec (2.8)
4.2 sec (2.8)
4.2 sec (2.8)
4.2 sec (2.8)
4.2 sec (2.8)
Chip to Chip (optional)
4.5 sec (3.6)
4.5 sec (3.6)
4.5 sec (3.6)
4.5 sec (3.6)
4.5 sec (3.6)
Positioning
±0.0002"
±0.005 mm
±0.0002"
±0.005 mm
±0.0002"
±0.005 mm
±0.0002"
±0.005 mm
±0.0002"
±0.005 mm
Repeatability
±0.0001"
±0.003 mm
±0.0001"
±0.003 mm
±0.0001"
±0.003 mm
±0.0001"
±0.003 mm
±0.0001"
±0.003 mm
7,100 lb | 7,400 lb
3 220 kg | 3 357 kg
7,300 lb | 7,500 lb
3 311 kg | 3 402 kg
12,500 lb | 14,000 lb
5 670 kg | 6 350 kg
13,300 lb
6 033 kg
14,600 lb | 15,150 lb
6 623 kg | 6 872 kg
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
Machine Weight
Miscellaneous
Air Required
Power Required (min)
1) 5-minute rating. 2) See page 12 for optional tool changer specifications. 3) Linear scales required to achieve accuracy listed.
36
VF-6
VF-7
VF-8
VF-9
VF-10
VF-11
VM-2
VM-3
MDC
64"
1 626 mm
84"
2 134 mm
64"
1 626 mm
84"
2 134 mm
120"
3 048 mm
120"
3 048 mm
30"
762 mm
40"
1016 mm
20"
508 mm
32"
813 mm
32"
813 mm
40"
1 016 mm
40"
1 016 mm
32"
813 mm
40"
1 016 mm
20"
508 mm
26"
660 mm
14"
356 mm
30"
762 mm
30"
762 mm
30"
762 mm
30"
762 mm
30"
762 mm
30"
762 mm
20"
508 mm
25"
635 mm
20"
508 mm
4 - 34"
102 - 864 mm
4 - 34"
102 - 864 mm
4 - 34"
102 - 864 mm
4 - 34"
102 - 864 mm
4 - 34"
102 - 864 mm
4 - 34"
102 - 864 mm
4 - 24"
102 - 610 mm
4 - 29"
102 - 737 mm
4 - 24"
102 - 610 mm
64"
1 626 mm
84"
2 134 mm
64"
1 626 mm
84"
2 134 mm
120"
3 048 mm
120"
3 048 mm
36"
914 mm
54"
1 372 mm
20"
508 mm
28"
711 mm
28"
711 mm
36"
914 mm
36"
914 mm
28"
711 mm
28"
711 mm
18"
457 mm
25"
635 mm
12.75"
324 mm
4,000 lb
1 814 kg
4,000 lb
1 814 kg
4,000 lb
1 814 kg
4,000 lb
1 814 kg
4,000 lb
1 814 kg
4,000 lb
1 814 kg
3000 lb
1 361 kg
4,000 lb
1 814 kg
700 lb per pallet
318 kg
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
5/8"
16 mm
4.92"
125 mm
4.92"
125 mm
4.92"
125 mm
4.92"
125 mm
4.92"
125 mm
4.92"
125 mm
4.375"
111 mm
3.973"
100 mm
4.92"
125 mm
#40 Taper
#40 Taper
#40 Taper
#40 Taper
#40 Taper
#40 Taper
#40 Taper
#40 Taper
#40 Taper
7,500 max rpm
7,500 max rpm
7,500 max rpm
7,500 max rpm
7,500 max rpm
7,500 max rpm
12,000 max rpm
12,000 max rpm
7,500 max rpm
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Direct Speed
Belt Drive
Inline
Direct Drive
Inline
Direct Drive
Direct Speed
Belt Drive
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 1,400
102 Nm @ 1 400
75 ft-lb @ 2,100
102 Nm @ 2 100
75 ft-lb @ 2,100
102 Nm @ 2 100
75 ft-lb @ 1,400
102 Nm @ 1 400
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
250 ft-lb @ 450
339 Nm @ 450
–
–
–
–
–
–
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Air/Oil Injection
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
Liquid Cooled
20 hp
14.9 kW
20 hp
14.9 kW
20 hp
14.9 kW
20 hp
14.9 kW
20 hp
14.9 kW
20 hp
14.9 kW
30 hp
22.4 kW
30 hp
22.4 kW
20 hp
14.9 kW
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
(z=5,600 lb) 3,400 lb
(24 910 N) 15 124 N
5,600 lb
24 910 N
(z=5,600 lb) 2,550 lb
(24 910 N) 11 343 N
540 ipm
13.7 m/min
600 ipm
15.2 m/min
540 ipm
13.7 m/min
600 ipm
15.2 m/min
360 ipm
9.1 m/min
360 ipm
9.1 m/min
710 ipm
18.0 m/min
710 ipm
18.0 m/min
1,000 ipm
25.4 m/min
600 ipm
15.2 m/min
600 ipm
15.2 m/min
600 ipm
15.2 m/min
600 ipm
15.2 m/min
600 ipm
15.2 m/min
600 ipm
15.2 m/min
710 ipm
18.0 m/min
710 ipm
18.0 m/min
1,000 ipm
25.4 m/min
500 ipm
12.7 m/min
500 ipm
12.7 m/min
500 ipm
12.7 m/min
500 ipm
12.7 m/min
360 ipm
9.1 m/min
360 ipm
9.1 m/min
500 ipm
12.7 m/min
500 ipm
12.7 m/min
833 ipm
21.1 m/min
24+1 (40+1)
24+1 (40+1)
24+1 (40+1)
24+1 (40+1)
24+1 (40+1)
24+1 (40+1)
24+1 (40+1)
24+1 (40+1)
24+1 (40+1)
CT or BT / 40
CT or BT / 40
CT or BT / 40
CT or BT / 40
CT or BT / 40
CT or BT / 40
CT/40
CT/40
CT/40
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
3" / 6"
76 mm / 152 mm
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
12 lb
5.4 kg
SMTC
SMTC
SMTC
SMTC
SMTC
SMTC
SMTC
SMTC
SMTC
2.8 sec
2.8 sec
2.8 sec
2.8 sec
2.8 sec
2.8 sec
2.8 sec
2.8 sec
2.2 sec
3.6 sec
±0.0003"3
±0.008 mm
±0.0002"3
±0.005 mm
3.6 sec
±0.0003"3
±0.008 mm
±0.0002"3
±0.005 mm
3.6 sec
±0.0003"3
±0.008 mm
±0.0002"3
±0.005 mm
3.6 sec
±0.0003"3
±0.008 mm
±0.0002"3
±0.005 mm
3.6 sec
±0.0003"3
±0.008 mm
±0.0002"3
±0.005 mm
3.6 sec
±0.0003"3
±0.008 mm
±0.0002"3
±0.005 mm
3.6 sec
3.6 sec
4.8 sec
±0.0002"
±0.005 mm
±0.0002"
±0.005 mm
±0.0002"
±0.005 mm
±0.0001"
±0.003 mm
±0.0001"
±0.003 mm
±0.0001"
±0.003 mm
21,000 lb
9 526 kg
23,000 lb
10 433 kg
24,000 lb
10 886 kg
25,000 lb
11 340 kg
28,000 lb
12 701 kg
29,400 lb
13 336 kg
7500 lb
3 402 kg
14,000 lb
6 350 kg
14,000 lb
6 350 kg
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
9 scfm, 100 psi
4.25 lpm, 6.9 bar
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
200 - 250 VAC
380 - 480 VAC
NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available. Specifications subject to
change without notice. Not responsible for misprints or typographical errors.
37
Machine Specifications (Standard 50-Taper Machines)
XX
YY
Travels
ZZ
SpindleNose
NosetotoTable
Table
Spindle
Length
Length
Width
Width
Table
MaxWeight
WeightononTable
Table
Max
T-SlotWidth
Width
T-Slot
T-Slot Center Distance
T-Slot Center Distance
TaperSize
Size
Taper
Speed
Speed
Drive
DriveSystem
System
Spindle
Max
MaxTorque
TorqueStandard
Standard
610 Nm @ 500
BearingLubrication
Lubrication
Bearing
Cooling
Cooling
Spindle
Rating1
SpindleMotor
MotorMax
Max
Rating1
Axis Motors Max Thrust Rating
Axis Motors Max Thrust Rating
Rapids
RapidsononX XAxis
Axis
Axis Motors
Rapids
RapidsononY Y& &Z Axes
Z Axes
Max
MaxCutting
Cutting
Tool Changer
Capacity
CapacityStandard
Standard
Tool Type / Taper
Tool Type / Taper
Max Tool Diameter Standard
Max Tool Diameter Standard
(full
(full/ /adjacent
adjacentempty)
empty)
Max Tool Weight
Max Tool Weight
Changer
ChangerType
TypeStandard
Standard
Tool to Tool (avg)
Tool to Tool (avg)
Chip to Chip (avg)
Chip to Chip (avg)
Positioning
Accuracy
Positioning
Repeatability
Repeatability
Machine Weight
Machine Weight
Air Required
Miscellaneous
Air Required
Power Required (min)
Power Required (min)
| VF-5/50XT
VF-5/50VF-5/50
| VF-5/50XT
VF-6/50
VF-6/50
VF-7/50
VF-7/50
50" 50"
| 60"| 60"
| 1524
1 2701270
mm |mm
1 524
mmmm
26"26"
660660
mmmm
25"25"
635635
mmmm
7 - 32"
7 - 32"
178 - 813 mm
64" 64"
1 6261626
mm mm
32" 32"
813 813
mm mm
30" 30"
762 762
mm mm
5 - 35"
5 - 35"
127 - 889 mm
84"84"
2134
2 134
mmmm
32"32"
813813
mmmm
30"30"
762762
mmmm
5 -535"
- 35"
127 - 889 mm
178 - 813 mm
52" 52"
| 62"| 62"
1 3211321
mm |mm
1 575
mmmm
| 1575
23"23"
584584
mmmm
4,000
lb lb
4,000
1 8141814
kg kg
5/8"5/8"
16 mm
16 mm
3.15"
3.15"
80 mm
80 mm
#50#50
Taper
Taper
7,5007,500
maxmax
rpmrpm
2-Speed
2-Speed
Geared
Head
Geared
Head
@ 500
450 450
ft-lbft-lb
@ 500
610 Nm610
@ Nm
500@ 500
Air/Oil
Injection
Air/Oil
Injection
Liquid
Cooled
Liquid
Cooled
30 hp
30 hp
22.422.4
kWkW
5,600 lb
5,600 lb
24910
24 910 N N
710710
ipmipm
m/min
18.018.0
m/min
710710
ipmipm
18.018.0
m/min
m/min
500500
ipmipm
12.712.7
m/min
m/min
30+130+1
CT or BT / 50
CT or BT / 50
4" / 7"
4" / 7"
102
mm
/
178
102 mm / 178 mmmm
30 lb
30 lb
13.613.6
kg kg
SMTC
SMTC
4.2 sec
4.2 sec
6.3 sec
6.3 sec
±0.0002"
±0.005 mm
±0.0002"
±0.005±0.0001"
mm
±0.003 mm
±0.0001"
mm lb
16,100±0.003
lb | 16,650
7303
kg
|
7552
16,100 lb | 16,650 lb kg
7 303 kg4 |scfm,
7 552100
kg psi
113 lpm,
4 scfm,
100 6.9
psi bar
113 lpm,
barVAC
2006.9
- 250
200 380
- 250- 480
VACVAC
380 - 480 VAC
1) 5-minute rating. 2) Linear scales required to achieve accuracy listed.
38
127 - 889 mm
64" 64"
1 6261626
mm mm
28" 28"
711 711
mm mm
4,0004,000
lb lb
1 8141814
kg kg
5/8"5/8"
16 mm
16 mm
4.92"
125 mm4.92"
125 mm
#50 #50
TaperTaper
7,5007,500
maxmax
rpmrpm
2-Speed
2-Speed
Geared
HeadHead
Geared
450 ft-lb
@ 500
450 ft-lb
@ 500
610 Nm
500@ 500
610@Nm
Air/Oil
Injection
Air/Oil
Injection
Cooled
LiquidLiquid
Cooled
30 hp
30 hp
22.422.4
kW kW
5,600 lb
5,600 lb
24910
24 910 N N
540 540
ipm ipm
m/min
13.7 13.7
m/min
600 600
ipm ipm
15.2 15.2
m/min
m/min
500 500
ipm ipm
12.712.7
m/min
m/min
30+130+1
CT or BT / 50
CT or BT / 50
4" / 10"
4" / 10"
102
mm
/
254
102 mm / 254 mm mm
30 lb
30 lb
13.613.6
kg kg
SMTC
SMTC
4.2 sec
4.2 sec
6.3 sec
6.3 sec
±0.0003"2
±0.0082 mm
±0.0003"
±0.008±0.0002"2
mm
±0.0052 mm
±0.0002"
±0.00522,500
mm lb
10206
22,500 lb kg
410
scfm,
206100
kg psi
113 lpm,
6.9 bar
4 scfm,
100 psi
113 lpm,
barVAC
2006.9
- 250
200 -380
250- 480
VACVAC
380 - 480 VAC
127 - 889 mm
84"84"
2 134
mmmm
2134
28"28"
711711
mmmm
4,000
lb lb
4,000
1 814
kg
1814 kg
5/8"
5/8"
16 mm
16 mm
4.92"
4.92"
125 mm
125 mm
#50#50
Taper
Taper
7,500
7,500
maxmax
rpmrpm
2-Speed
2-Speed
Geared
Head
Geared
Head
450450
ft-lbft-lb
@@
500500
610 Nm 610
@ 500
Nm @ 500
Air/Oil
Injection
Air/Oil
Injection
Liquid
Cooled
Liquid
Cooled
30 30
hphp
22.422.4
kWkW
(x=3,400 lb) 5,600 lb
(x=3,400 lb) 5,600 lb
(15124
N) 910
24910
(15 124
N) 24
NN
600600
ipmipm
m/min
15.215.2
m/min
600600
ipmipm
15.215.2
m/min
m/min
500500
ipmipm
12.712.7
m/min
m/min
30+1
30+1
CT or BT / 50
CT or BT / 50
4" / 10"
4" / 10"
102
mm
/
254
102 mm / 254 mmmm
30 lb
30 lb
13.613.6
kg kg
SMTC
SMTC
4.2 sec
4.2 sec
6.3 sec
6.3 sec
±0.0003"2
2
±0.008 mm
±0.0003"
±0.008
mm
±0.0002"2
2
±0.005 mm
±0.0002"
±0.005
mm lb
24,500
11113lb kg
24,500
4 scfm,
11 113100kgpsi
113 lpm,
4 scfm,
1006.9
psibar
113 lpm,
200 -6.9
250bar
VAC
- 480
VAC
200380
- 250
VAC
380 - 480 VAC
VF-8/50
VF-8/50
64"
64"
1626
1 626mm
mm
40"
40"
1016mm
mm
1016
30"
30"
762mm
mm
762
35"
55- -35"
127 - 889 mm
127 - 889 mm
64"
64"
1 626mm
mm
1626
36"
36"
914mm
mm
914
4,000lblb
4,000
1 814 kg
1814 kg
5/8"
5/8"
16 mm
16 mm
4.92"
4.92"
125
mm
125 mm
#50Taper
Taper
#50
7,500
7,500max
maxrpm
rpm
2-Speed
2-Speed
GearedHead
Head
Geared
450
450ft-lb
ft-lb@@500
500
610 Nm @ 500
610 Nm @ 500
Air/OilInjection
Injection
Air/Oil
Liquid
LiquidCooled
Cooled
3030hphp
22.4kW
kW
22.4
5,600 lb
5,600 lb
24910
24 910NN
540
540ipm
ipm
13.7
13.7m/min
m/min
600
600ipm
ipm
15.2m/min
m/min
15.2
500
500ipm
ipm
12.7m/min
m/min
12.7
30+1
30+1
CT or BT / 50
CT or BT / 50
4" / 10"
4" / 10"
102
mm
/
254
102 mm / 254mm
mm
30 lb
30 lb
13.6
13.6kgkg
SMTC
SMTC
4.2 sec
4.2 sec
6.3 sec
6.3 sec
±0.0003"2
±0.008
mm 2
±0.0003"
±0.008
mm
±0.0002"2
±0.005
mm 2
±0.0002"
±0.005
25,500 mm
lb
11567
25,500kglb
4 scfm,11100
567psikg
113
lpm, 6.9
4 scfm,
100barpsi
113
bar
200lpm,
- 2506.9
VAC
380
200- -480
250VAC
VAC
380 - 480 VAC
VF-10/50
VF-10/50
VF-11/50
VF-11/50
84"84"
2134
2 134
mmmm
40"40"
1 016
mmmm
1016
30"30"
762762
mmmm
5 - 535"
- 35"
127 - 889 mm
120"120"
3 0483048
mmmm
32"32"
813813
mmmm
30"30"
762762
mmmm
5 - 35"
5 - 35"
127 - 889 mm
120"
120"
3048
mmmm
3 048
40"40"
1 016
1016
mmmm
30"30"
762762
mmmm
- 35"
5 - 535"
127 - 889 mm
127 - 889 mm
120"
120"
3 048
3048
mmmm
28"28"
711711
mmmm
4,000
4,000
lb lb
1 814 kg
1814 kg
5/8"5/8"
16 mm
16 mm
4.92"
4.92"mm
125
125 mm
Taper
#50#50
Taper
7,500
maxmax
rpmrpm
7,500
2-Speed
2-Speed
Geared
Head
Geared
Head
450450
ft-lb
@@
500500
ft-lb
610 Nm @ 500
Air/Oil
Injection
Air/Oil
Injection
Liquid
Cooled
Liquid
Cooled
30 30
hp hp
22.4
22.4
kWkW
(x=3,400 lb) 5,600 lb
(x=3,400 lb) 5,600 lb
(15124
N) N)24910
N N
(15 124
24910
360360
ipmipm
9.19.1
m/min
m/min
600600
ipmipm
15.2
m/min
15.2
m/min
360360
ipmipm
m/min
9.19.1
m/min
30+1
30+1
CT or BT / 50
CT or BT / 50
4" / 10"
4" / 10"
102
mm
/
254
mmmm
102 mm / 254
30 lb
30 lb
13.613.6
kg kg
SMTC
SMTC
4.2 sec
4.2 sec
6.3 sec
6.3 sec
±0.0003"2
±0.008
mm 2
±0.0003"
±0.008 mm
±0.0002"2
±0.005
mm 2
±0.0002"
±0.005lbmm
30,900
14016
kg lb
30,900
4 scfm, 100
psi kg
14 016
1134lpm,
6.9100
bar psi
scfm,
113 -lpm,
6.9 bar
200
250 VAC
380200
- 480
VACVAC
- 250
127 - 889 mm
84"84"
2 134
mmmm
2134
36"36"
914914
mmmm
4,000
lb lb
4,000
1 814
kg
1814 kg
5/8"5/8"
16 mm
16 mm
4.92"
4.92"
125 mm
125 mm
#50#50
Taper
Taper
7,500
7,500
maxmax
rpmrpm
2-Speed
2-Speed
Geared
Head
Geared
Head
@ 500
450450
ft-lbft-lb
@ 500
610 Nm
500@ 500
610@Nm
Air/Oil
Injection
Air/Oil
Injection
Liquid
Cooled
Liquid
Cooled
30 30
hp hp
22.422.4
kWkW
(x=3,400 lb) 5,600 lb
(x=3,400 lb) 5,600 lb
(15124
N)910
24910
(15 124
N) 24
NN
600600
ipmipm
m/min
15.215.2
m/min
600600
ipmipm
15.215.2
m/min
m/min
500500
ipmipm
12.712.7
m/min
m/min
30+1
30+1
CT or BT / 50
CT or BT / 50
4" / 10"
4" / 10"
102
mm
/
254
102 mm / 254 mmmm
30 lb
30 lb
13.613.6
kg kg
SMTC
SMTC
4.2 sec
4.2 sec
6.3 sec
6.3 sec
±0.0003"2
±0.008 2mm
±0.0003"
±0.008
mm
±0.0002"2
±0.005 2mm
±0.0002"
±0.005
mm lb
26,500
12020
26,500 lb kg
4 scfm,
12 020100
kgpsi
113 lpm,
4 scfm,
1006.9
psibar
113 lpm,
200 6.9
- 250barVAC
- 480
200380
- 250
VACVAC
380 - 480 VAC
127 - 889 mm
120"120"
3 0483048
mmmm
28"28"
711711
mmmm
4,000
lb lb
4,000
1 8141814
kg kg
5/8"5/8"
16 mm
16 mm
4.92"
4.92"
125 mm
125 mm
#50#50
Taper
Taper
7,5007,500
maxmax
rpmrpm
2-Speed
2-Speed
Geared
Head
Geared
Head
@ 500
450 450
ft-lbft-lb
@ 500
610 610
Nm Nm
@ 500
@ 500
Air/Oil
Injection
Air/Oil
Injection
Liquid
Cooled
Liquid
Cooled
30 hp
30 hp
22.422.4
kWkW
(x=3,400 lb) 5,600 lb
(x=3,400 lb) 5,600 lb
(15124
N) 24910
(15 124
N) 24910
N N
360360
ipmipm
m/min
9.1 9.1
m/min
600600
ipmipm
15.215.2
m/min
m/min
360360
ipmipm
9.1 9.1
m/min
m/min
30+130+1
CT or BT / 50
CT or BT / 50
4" / 10"
4" / 10"
102
mm
/
254
102 mm / 254 mmmm
30 lb
30 lb
13.613.6
kg kg
SMTC
SMTC
4.2 sec
4.2 sec
6.3 sec
6.3 sec
±0.0003"2
±0.008 2mm
±0.0003"
±0.008
mm
±0.0002"2
±0.005 2mm
±0.0002"
±0.00529,500
mm lb
13381
29,500 lb kg
4 13
scfm,
381100
kg psi
113 lpm,
4 scfm,
100 6.9
psibar
113 lpm,
barVAC
2006.9
- 250
200 380
- 250- 480
VACVAC
380 - 480 VAC
Through-Spindle Coolant Options
8.0
Volume (GPM)
VF-9/50
VF-9/50
7.0
6.0
5.0
4.0
3.0
2.0
1.0
300 psi
TSC output
1,000 psi TSC output
0
300
1,000
Flow Rate Dynamics
The chart above illustrates the relationship between flow and pressure. For
both the 300 psi and 1,000 psi through-spindle coolant options, the highest
pressure occurs at the lowest flow rate. The actual pressure delivered to the
cutting edge depends on the size of the coolant passages in the tool. Smaller
coolant passages restrict the flow, causing the pressure to increase (up to
the maximum provided by the system). Conversely, larger coolant passages
in the tool allow more fluid to pass through, resulting in lower pressure at
the cutting edge.
50 Taper Offers More
Gage diameter (A)
Taper length (B)
Tool clamp force*
Max tool weight
Max tool diameter
40 Taper
1.750"
44.45 mm
2.687"
68.25 mm
1,800 lb
8 007 N
12 lb
5.4 kg
6"
152.4 mm
50 Taper
2.750"
69.85 mm
4.000"
101.60 mm
4,000 lb
17 793 N
30 lb
13.6 kg
10"
254 mm
*Nominal
A
B
A
B
380 - 480 VAC
NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available.
Specifications subject to change without notice. Not responsible for misprints or typographical errors.
Some items shown in this brochure are optional. Please contact your local distributor for assistance.
39
Worldwide Support
U.S. headquarters & manufacturing facility
European headquarters & showroom with
• machine
inventory and spare parts
distribution center (Brussels)
Asian headquarters & showroom with
• machine
inventory and spare parts
distribution center (Shanghai)
Head Office, California, USA
More than $50,000,000 in spare parts are stocked at 160 locations worldwide.
European Headquarters, Brussels, Belgium
Asian Headquarters, Shanghai, China
Our network of dedicated Haas Factory Outlets provides local attention to detail, fully stocked service vans, and the training and backing of an international organization.
In total, more than $50,000,000 in spare parts are stocked at 160 locations worldwide. Local parts inventories are supported by overnight availability from main headquarters.
Haas Automation, Inc.
2800 Sturgis Road, Oxnard, California 93030 Toll Free: 800-331-6746 Fax: 805-278-8540
www.HaasCNC.com
Haas Automation, Europe
Mercuriusstraat 28, B-1930 Zaventem, Belgium • Tel: 011-32 2 522 99 05 Fax: 011-32 2 523 08 55
Haas Automation, Asia
No. 96 Yi Wei Road, Building 67, Waigaoqiao FTZ, Shanghai 200131 P.R.C. • Tel: 011-86 21 3861 6666 Fax: 011-86 21 3861 6799
39-906035