electric guitar nuts

THE SELF LUBRICATING NUT WITH TONE
STRINGS FLOAT EFFORTLESSLY BACK INTO TUNE.
TREM-NUT will keep your guitar in tune longer than graphite, bone plastic or
synthetic nuts. In addition, a TREM-NUT has crystal clear tone and sustain.
TREM-NUTs are factory-installed by many major guitar manufacturers.
HOW TREM-NUTS WORK: As strings move across a TREM-NUT, they shear
open microscopic “capsules” loaded with millions of “ball bearing” type
lubricants. For strings, it’s like a hardwood floor covered in marbles...
strings roll back into tune. It’s that simple!
When installing a TREM-NUT, replace any retainers (string trees) with
TREM-NUT string retainers to alleviate friction and binding at these contact
points.
COMPARISON CHART
“As far as your Trem-Nut goes, it’s incredible! I can’t believe that after tuning
the guitar and stretching the strings a bit, it actually stayed in tune! No binding,
nothing!”
C. Walog, Guitarist, USA
TREM-NUT IVORY MICARTA™ BONE CORIAN™
Increases sustain
Improves tone
Consistent quality
Super lubricating
Improves tuning
Designed for Trem use
“Before, my Strat would never stay in tune, and then I used your products and it
never goes out. All guitars should come with Graph Tech (parts).”
D. Stallard, Guitarist
“I am very impressed by your products. We have used the nuts on both acoustic and electric guitars and they have proven to be far more sustainable than
bone or graphite, the materials we have used up until now.”
H. Larrson, Guitar Manufacturer.
Flake & chip resistant
Inspires confidence
ELECTRIC GUITAR NUTS
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-1000-00
Strat Blank Nut
Length
Width
Height
E to E Spacing
Inches
1.750
0.123
0.175
NA
Approx. In.
1 3/4
1/8
11/64/
NA
Millimeters
44.45
3.13
4.45
NA
Description
Fits most American-made Strat style
guitars with curved bottom.
PT-1500-00
Slotted 12-String Nut
Length
Width
Height
E to E Spacing
Inches
1.750
0.199
0.294
1.50
Approx. In.
1 3/4
3/16
9/32
1 1/2
Millimeters
44.45
5.06
7.48
38.10
Description
Chill Boy.
PT-1575-00
1/4” Slotted 12-String Nut
www.graphtech.bc.ca
Length
Width
Height
E to E Spacing
Inches
1.75
0.248
0.335
1.46
Approx. In.
1 3/4
1/4
5/16
1 1/12
Millimeters
44.45
6.27
8.48
37.09
[email protected]
Phone 604-940-5353
Description
Designed with Rainsong Guitars.
Fax 604-940-4961
Page 1
THE SELF LUBRICATING NUT WITH TONE
ELECTRIC NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-2000-00
Standard Blank Nut
Length
Width
Height
E to E Spacing
Inches
1.749
0.14
0.245
NA
Approx. In.
1 3/4
1/8
1/4
NA
Millimeters
44.43
3.58
6.21
NA
Description
PT-2200-00
Standard Blank Nut
Length
Width
Height
E to E Spacing
Inches
1.75
.125
0.245
NA
Approx. In.
1 3/4
1/8
1/4
NA
Millimeters
44.45
3.17
6.21
NA
Length
Width
Height
E to E Spacing
1.70
0.183
0.330
NA
Approx. In.
1 11/16
3/16
21/64
NA
Millimeters
43.20
4.65
8.44
NA
Description
Fits most import Strat style guitars
with a flat bottom nut slot.
PT-3000-00
Inches
Jumbo Blank Nut
Description
Gibson style blank nut.
PT-4000-00
Extra Large Jumbo Blank Nut
Length
Width
Height
E to E Spacing
Inches
1.905
0.192
0.3878
NA
Description
Approx. In.
1 7/8
3/16
3/8
NA
Millimeters
48.39
4.87
9.53
NA
Length
Width
Height
E to E Spacing
1.925
0.193
0.295
NA
Approx. In.
1 59/64
3/16
19/64
NA
Millimeters
48.85
4.90
8.82
NA
Length
Width
Height
E to E Spacing
Description
1.693
0.132
0.21
1.385
Approx. In.
1 23/32
1/8
3/16
1 7/16
Fits most American and import Strat
and Tele style guitars. Remove spacer
for curved bottom slot.
Millimeters
43.00
3.37
5.35
36.20
Fits many acoustics such as Gibson,
Guild, Larivee, etc.
PT-4202-00
Inches
Blank 1 59/64” Nut
Description
Designed with Bob Taylor of Taylor
Guitars.
PT-5000-00
Inches
Slotted Strat Nut
Page 2
www.graphtech.bc.ca
[email protected]
Phone 604-940-5353
Fax 604-940-4961
THE SELF LUBRICATING NUT WITH TONE
ELECTRIC NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-5000-L0
Length
Width
Height
E to E Spacing
Description
1.693
0.132
0.21
1.385
Approx. In.
1 23/32
1/8
3/16
1 7/16
Fits most American and import Strat
and Tele style guitars. Remove spacer
for curved bottom slot.
Millimeters
43.00
3.37
5.35
36.20
Length
Width
Height
E to E Spacing
1.693
0.132
0.21
1.385
Approx. In.
1 23/32
1/8
3/16
1 7/16
Millimeters
43.00
3.37
5.35
36.20
Length
Width
Height
E to E Spacing
1.98
0.127
0.222
1.137
Approx. In.
1 31/32
1/8
1/4
1 1/8
Millimeters
49.53
3.22
5.63
28.87
Inches
Slotted Strat Nut
PT-5010-00
Inches
Slotted Import Strat Nut
Description
Same as our PT-5000-00, but with a
flat bottom for import Strat guitars.
PT-5700-00
Inches
Slotted Strat 7-String Nut
Description
PT-6000-00
Slotted Jumbo Nut
Length
Width
Height
E to E Spacing
Inches
1.735
0.196
0.33
1.425
Approx. In.
1 3/4
3/16
11/32
1 7/16
Millimeters
44.07
4.98
8.36
36.20
Length
Width
Height
E to E Spacing
1.715
0.195
0.335
1.415
Approx. In.
1 23/32
3/16
11/32
1 7/16
Millimeters
43.57
4.95
8.52
36.20
Description
Designed with Carvin Guitars. Fits
most 6-string electric guitars.
PT-6000-L0
Inches
Slotted Jumbo Left-hand Nut
Description
Same as PT-6000-00, but for lefties.
PT-6010-00
Slotted Jumbo Nut
www.graphtech.bc.ca
Length
Width
Height
E to E Spacing
Inches
1.735
0.196
0.38
1.425
Approx. In.
1 3/4
3/16
3/8
1 7/16
Millimeters
44.07
4.98
9.30
36.20
[email protected]
Phone 604-940-5353
Description
Fits most Gibson 6-string electrics.
Fax 604-940-4961
Page 3
THE SELF LUBRICATING NUT WITH TONE
ELECTRIC NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-6060-00
1/4” Slotted Nut
Length
Width
Height
E to E Spacing
Inches
1.73
0.2425
0.3575
1.425
Approx. In.
1 3/4
1/4
3/8
1 7/16
Millimeters
43.94
6.21
9.09
36.20
Description
PT-6225-00
1 5/8” Slotted Nut
Length
Width
Height
E to E Spacing
Inches
1.625
0.248
0.325
1.376
Approx. In.
1 5/8
1/4
21/64
1 3/8
Millimeters
41.27
6.30
8.24
34.95
Description
Designed with Rainsong Guitars.
PT-6235-00
1 3/4” Slotted Nut
Length
Width
Height
E to E Spacing
Inches
1.75
0.25
0.246
1.48
Approx. In.
1 3/4
1/4
1/4
1 1/2
Millimeters
44.46
6.36
6.25
37.62
Length
Width
Height
E to E Spacing
1.918
0.195
0.341
1.62
Approx. In.
1 29/32
3/16
11/32
1 5/8
Millimeters
48.72
4.95
8.66
41.15
Description
Designed with Rainsong Guitars.
PT-6700-00
Inches
Carvin 7-String Slotted Nut
Description
Designed with Rainsong Guitars.
PT-4025-00
Nut Slab
Length
Width
Height
E to E Spacing
Inches
2.50
0.25
0.4375
NA
Approx. In.
2 1/2
1/4
7/16
NA
Millimeters
63.50
6.35
11.10
NA
Description
For guitar nuts that require extra
length, height or thickness.
PT-4125-00
Nut Slab
Page 4
www.graphtech.bc.ca
Length
Width
Height
E to E Spacing
Inches
2.50
0.125
0.3125
NA
Approx. In.
2 1/2
1/8
5/16
NA
Millimeters
63.50
3.17
7.93
NA
[email protected]
Phone 604-940-5353
Description
For guitar nuts that require extra
length, height or thickness.
Fax 604-940-4961
THE SELF LUBRICATING NUT WITH TONE
ELECTRIC NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-4187-00
Nut Slab
www.graphtech.bc.ca
Length
Width
Height
E to E Spacing
Inches
2.50
0.1875
0.4375
NA
Approx. In.
2 1/2
3/16
7/16
NA
Millimeters
63.50
4.76
11.10
NA
[email protected]
Phone 604-940-5353
Description
For guitar nuts that require extra
length, height or thickness.
Fax 604-940-4961
Page 5
ELECTRIC GUITAR
NUT/RETAINER PACKS & BUTTONS
THE SELF LUBRICATING NUT WITH TONE
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-1001-00
3 Pieces
Nut/Retainer Pack
Length
Width
Height
E to E Spacing
Description
Inches
1.75
0.123
0.175
NA
Contains two PT-7000-00 string trees
and one PT-1000-00 nut.
Approx. In.
1 3/4
1/8
11/64
NA
Millimeters
44.45
3.13
4.45
NA
PT-2001-00
3 Pieces
Nut/Retainer Pack
Length
Width
Height
E to E Spacing
Description
Inches
1.749
0.14
0.245
NA
Contains two PT-7000-00 string trees
and one PT-2000-00 nut.
Approx. In.
1 3/4
1/8
1/4
NA
Millimeters
44.43
3.58
6.21
NA
Length
Width
Height
E to E Spacing
Description
1.693
0.132
0.21
1.385
Contains two PT-7000-00 string trees
and one PT-5000-00 nut.
Approx. In.
1 23/32
1/8
3/16
1 7/16
Millimeters
43.00
3.37
5.35
36.20
PT-5001-00
Inches
3 Pieces
Nut/Retainer Pack
PT-7000-00
PT-7001-00
Description
Description
Fits most Strat and Tele style guitars
that use string trees. Built-in spacer
provides solid contact to headstock.
Simply sand the spacer to lower it.
String Trees
2 Pieces
Contains one tall and one short string
tree.
String Trees
PT-7200-00
2 Pieces
PT-7202-00
Description
Description
“V” style strap buttons that keep your
strap on without any moving parts.
Strap Buttons
Page 6
2 Pieces
www.graphtech.bc.ca
Vintage style strap buttons.
Vintage Buttons
[email protected]
2 Pieces
Phone 604-940-5353
Fax 604-940-4961
THE SELF LUBRICATING NUT WITH TONE
BASS GUITAR NUTS
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-1200-00
Length
Width
Height
E to G Spacing
1.615
0.182
0.35
1.224
Approx.
1 39/64
3/16
11/32
1 7/32
Millimeters
41.02
4.62
8.85
31.08
Length
Width
Height
E to G Spacing
1.65
0.125
0.187
1.25
Approx.
1 5/8
1/8
3/16
1 1/4
Millimeters
41.91
3.17
4.75
31.75
Length
Width
Height
E to G Spacing
1.614
0.196
0.354
1.369
Approx.
1 5/8
1/8
3/8
1 3/8
Millimeters
41.00
4.97
9.00
34.77
Length
Width
Height
E to G Spacing
1.765
0.188
0.35
1.435
Approx.
1 49/64
3/16
11/32
1 7/16
Millimeters
44.83
4.75
8.83
36.45
Length
Width
Height
E to G Spacing
1.8
0.141
0.28
1.439
Approx.
1 13/16
9/64
9/32
1 7/16
Millimeters
45.80
3.58
7.14
36.56
Length
Width
Height
E to G Spacing
1.825
0.25
0.415
1.484
Approx.
1 13/16
1/4
13/32
1 1/2
Millimeters
46.30
6.40
10.50
37.70
Inches
4-String Bass Nut
Description
Designed with Carvin Guitars.
PT-1204-00
Inches
Precision-style Bass Nut
Description
PT-1212-00
Inches
4-String Bass Nut
Description
PT-1400-00
Inches
5-String Bass Nut
Description
Designed with Carvin Guitars.
PT-1401-00
Inches
5-String Bass Nut
Description
Designed with Peavey Guitars.
PT-1412-00
Inches
5-String Bass Nut
www.graphtech.bc.ca
[email protected]
Phone 604-940-5353
Fax 604-940-4961
Description
Page 7
THE SELF LUBRICATING NUT WITH TONE
BASS GUITAR NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-1600-00
Length
Width
Height
E to G Spacing
2.04
0.189
0.36
1.435
Approx.
2 1/32
3/16
11/32
1 7/16
Millimeters
51.73
4.78
9.10
36.45
Inches
6-String Bass Nut
Description
Designed with Carvin Guitars.
TECH TIP
HOW TO MEASURE FOR PROPER NUT HEIGHT.
Press down each string in turn behind the second fret (the G note on the E strings). Now check the clearance of the string above the first fret. If it is touching
the first fret, the nut slot is too low. Proper nut slot height is just a paper thickness between the string and the first fret on the plain strings and about twice
that on the wound strings.
Page 8
www.graphtech.bc.ca
[email protected]
Phone 604-940-5353
Fax 604-940-4961
THE SELF LUBRICATING NUT WITH TONE
ACOUSTIC GUITAR NUTS
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-1250-00
Slotted Ukele Nut
Length
Width
Height
E to E Spacing
Inches
1.402
0.14
0.222
1.137
Approx. In.
1 7/16
5/32
1/4
1 1/8
Millimeters
35.61
3.55
5.63
28.87
Description
String spacing is G to A.
PT-1535-00
Slotted Mandolin Nut
Length
Width
Height
E to E Spacing
Inches
1.197
0.162
0.298
0.975
Approx. In.
1 3/16
5/32
5/16
31.32
Millimeters
30.40
4.12
7.59
24.77
Description
String spacing is G to E.
PT-1575-00
Slotted 12-String 1/4” Nut
Length
Width
Height
E to E Spacing
Inches
1.75
0.248
0.335
1.46
Approx. In.
1 3/4
1/4
5/16
1 1/12
Millimeters
44.45
6.27
8.48
37.09
Description
Designed with Rainsong Guitars.
PT-1578-00
Slotted 12-String 3/16” Nut
Length
Width
Height
E to E Spacing
Inches
1.895
0.195
0.325
1.63
Approx. In.
1 7/8
3/16
5/16
1 5/8
Millimeters
48.19
4.95
8.26
41.41
Length
Width
Height
E to E Spacing
1.70
0.183
0.33
NA
Approx. In.
1 11/16
3/16
21/64
NA
Millimeters
43.20
4.65
8.44
NA
Description
Designed with Tacoma Guitars.
PT-3000-00
Inches
Blank Jumbo Nut
Description
Gibson style nut blank.
PT-4000-00
Blank Extra Large Jumbo Nut
www.graphtech.bc.ca
Length
Width
Height
E to E Spacing
Inches
1.905
0.192
0.3878
NA
Approx. In.
1 7/8
3/16
3/8
NA
Millimeters
48.39
4.87
9.53
NA
[email protected]
Phone 604-940-5353
Fax 604-940-4961
Description
Page 9
THE SELF LUBRICATING NUT WITH TONE
ACOUSTIC GUITAR NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-4025-00
Nut Slab
Length
Width
Height
E to E Spacing
Description
Inches
2.50
0.25
0.4375
NA
Approx. In.
2 1/2
1/4
7/16
NA
Rectangular blocks designed with
luthiers in mind, for those guitars that
need extra length, height or thickness.
Millimeters
63.50
6.35
11.10
NA
PT-4125-00
Nut Slab
Length
Width
Height
E to E Spacing
Description
Inches
2.50
0.125
0.3125
NA
Approx. In.
2 1/2
1/8
5/16
NA
Rectangular blocks designed with
luthiers in mind, for those guitars that
need extra length, height or thickness.
Millimeters
63.50
3.17
7.93
NA
PT-4187-00
Nut Slab
Length
Width
Height
E to E Spacing
Description
Inches
2.50
0.1875
0.4375
NA
Approx. In.
2 1/2
3/16
7/16
NA
Rectangular blocks designed with
luthiers in mind, for those guitars that
need extra length, height or thickness.
Millimeters
63.50
4.76
11.10
NA
Length
Width
Height
E to E Spacing
1.925
0.193
0.295
NA
Approx. In.
1 59/64
3/16
19/64
NA
Millimeters
48.85
4.90
8.82
NA
PT-4202-00
Inches
Blank 1 59/64” Nut
Description
Designed with Bob Taylor of Taylopr
Guitars.
PT-6060-00
1/4” Slotted Nut
Length
Width
Height
E to E Spacing
Inches
1.73
0.2425
0.3575
1.425
Approx. In.
1 3/4
1/4
3/8
1 7/16
Millimeters
43.94
6.21
9.09
36.20
Length
Width
Height
E to E Spacing
1.705
0.195
0.332
1.374
Approx. In.
1 23/32
3/16
11/32
1 3/8
Millimeters
43.30
4.95
8.43
34.90
Description
PT-6114-00
Inches
Slotted Left-hand Nut
Page 10
www.graphtech.bc.ca
[email protected]
Phone 604-940-5353
Fax 604-940-4961
Description
THE SELF LUBRICATING NUT WITH TONE
ACOUSTIC GUITAR NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-6114-L0
Length
Width
Height
E to E Spacing
1.705
0.195
0.332
1.374
Approx. In.
1 23/32
3/16
11/32
1 3/8
Millimeters
43.30
4.95
8.43
34.90
Length
Width
Height
E to E Spacing
1.70
0.192
0.33
1.436
Approx. In.
1 11/16
3/16
5/16
1 7/16
Millimeters
43.36
4.88
8.40
36.45
Inches
Slotted Left-hand Nut
Description
PT-6116-00
Inches
Slotted 1 11/16” Blank Nut
Description
Designed with Tacoma Guitars.
PT-6134-00
Slotted 1 3/4” Nut
Length
Width
Height
E to E Spacing
Inches
1.77
0.192
0.33
1.495
Description
Approx. In.
1 3/4
3/16
5/16
1 1/2
Millimeters
44.96
4.88
8.40
38.00
Length
Width
Height
E to E Spacing
1.83
0.185
0.34
1.55
Approx. In.
1 13/16
3/16
11/32
1 9/16
Millimeters
46.49
4.75
8.65
39.50
Length
Width
Height
E to E Spacing
Description
2.08
0.235
0.41
1.71
Approx. In.
2 5/64
1/4
13/32
1 11/16
Designed with Spanish luthier
Manuel Rodriguez Jr. Slots need final
finishing.
Millimeters
52.83
5.96
10.40
43.10
Designed with Tacoma Guitars.
PT-6136-00
Inches
Slotted 1 13/16” Nut
Description
Designed with Tacoma Guitars.
PT-6200-00
Inches
Slotted Classical Nut
PT-6225-00
1 5/8” Slotted Nut
www.graphtech.bc.ca
Length
Width
Height
E to E Spacing
Inches
1.625
0.248
0.325
1.376
Approx. In.
1 5/8
1/4
21/64
1 3/8
Millimeters
41.27
6.30
8.24
34.95
[email protected]
Phone 604-940-5353
Description
Designed with Rainsong Guitars.
Fax 604-940-4961
Page 11
THE SELF LUBRICATING NUT WITH TONE
ACOUSTIC GUITAR NUTS CONTINUED
PRODUCT SIZING TIP: All products pictured are actual size. Simply match up the nut or saddle you are upgrading by placing it on top of the image on the page.
PT-6234-00
1 3/4” Slotted Nut
Length
Width
Height
E to E Spacing
Inches
1.75
0.248
0.335
1.48
Approx. In.
1 3/4
1/4
11/32
1 1/2
Millimeters
44.47
6.30
8.54
37.62
Description
Designed with Rainsong Guitars.
PT-6235-00
1 3/4” Slotted Nut
Length
Width
Height
E to E Spacing
Inches
1.75
0.25
0.246
1.48
Approx. In.
1 3/4
1/4
1/4
1 1/2
Millimeters
44.46
6.36
6.25
37.62
Description
Designed with Rainsong Guitars.
PT-M100-00
Blank Martin Nut
Length
Width
Height
E to E Spacing
Inches
1.89
0.235
0.42
NA
Approx. In.
1 7/8
1/4
13/32
NA
Millimeters
48.00
5.75
10.66
NA
Length
Width
Height
E to E Spacing
1.71
0.228
0.36
1.378
Approx. In.
1 11/16
7/32
3/8
1 3/8
Millimeters
43.42
5.80
9.16
35.00
Description
Bottom and sides are angled.
PT-M600-00
Inches
Slotted Martin Nut
Page 12
www.graphtech.bc.ca
[email protected]
Phone 604-940-5353
Description
Bottom and sides are angled.
Fax 604-940-4961