Core Drilling Pumps

Core Drilling Pumps
Core Drilling
and Mining
The durability of the FMC Technologies “Bean”
piston pumps is unsurpassed within the vertical
drilling markets. Designed for continuous duty
applications, the FMC Technologies “Bean” piston
line increases drilling productivity while lowering
the overall cost of ownership. The pump’s simple
design incorporates less wearable components and
ease of service. FMC Technologies self-cleaning
and erosion resistant valve technology enables
the pumps to handle the most abrasive and
stringy fluids within the industry. Each drilling
activity requires enhancing certain conditions and
criteria to maximize drilling performance. This
customization has let FMC technologies pumps
to become the leader within the surface and
underground coring, water well, geotechnical and
the environmental drilling markets with its “BEAN”
piston pump product line.
A prolific inventor, John Bean interrupted his
California retirement in 1884 to develop a
continuous spray pump to combat orchard scale.
The rest is FMC history.
3
Reciprocating Pumps
FMC Technologies’ reciprocating pumps have provided exceptional performance and value
since their introduction in 1884. As a pioneer and global leader in providing high-pressure fluid
pumping solutions within a variety of
markets, FMC Technologies offers a broad
array of high pressure piston and plunger
reciprocation pumps within the industrial,
oil and gas, sewer cleaning, horizontal
and vertical drilling, reverse osmosis and
agricultural markets.
Since its inception, FMC Technologies
has been known as a company that puts
its customers first and keeps them ahead
with engineered business solutions. This
Original pump designed by John Bean
philosophy has led to a broad array of
custom pump designs for the toughest of applications. By designing and engineering products
with superior quality and reliability at a competitive price, FMC Technologies’ customers are
able to deliver added value and meet their market needs. This type of partnership has allowed
FMC Technologies to set new standards in lowering overall cost of pump ownership for FMC
Technologies global partners.
Contents
4.
Piston Pump Overview
6.
Pump Data Sheet
8
A04
10
I04
12.
E04
14.
L09
16
W11
18
L11
20
L12
22
L16
In addition to the services already
listed, FMC Technologies is a leading
provider of pumping solutions designed
for mobile equipment. These pumps
feature lightweight, high performance
construction and special designs to allow
them to efficiently integrate into the
overall equipment package.
WORLD’S MOST ADMIRED
oil and gas equipment,
services company
by FORTUNE Magazine
annual survey 2012
Please use the backside of this
fold-out to determine your
pump HP requirement.
Pump Selection Procedure
1.
Determine your HP requirement
using the following equation:
HP=
GPM x PSI
1714 x Mechanical Efficiency
For preliminary sizing, use 90% for
the mechanical efficiency, then adjust
based on actual efficiency of pump
selected.
2.
Determine the duty cycle of your
application. Continuous Duty
is described as 8 hours or more
operation per day, daily for extended
periods of time.
3.
Find the Pump Series under the first
column with a HP rating that meets
or exceeds the conditions of your
application. Continuous HP is listed
first. Intermittent HP is listed second.
4.
Scan down the Rated Pressure
column in the Pump Series selected
until you find the last model whose
maximum pressure rating exceeds the
maximum pressure required by your
application.
5.
Check the appropriate capacity
column (Continuous Duty Capacity
or Intermittent Duty Capacity) to
determine if the pump you selected
meets the flow requirements of your
application. If not, go to the next
larger pump series and repeat Steps
4 & 5.
6.
Determine the speed at which the
pump will need to operate to produce
the desired flow.
RPM=
Desired Flow (GPM)
Displacement
Notes:
1. Ratings are based on nominal speeds and
pressures and may vary on FMC Technologies
written approval.
2. Capacities and speeds indicated are based on
100% volumetric efficiency.
3. Continuous Duty is described as 8 hours or
more operation per day, daily for extended
periods of time.
4. Dimensions are approximate and based
on standard pump models with cast fluid
cylinders. Width is measured parallel to the
axis of the drive shaft and does not include the
shaft extension.
A04
2.6/3.2 HP
I04
2.6/3.2 HP
E04
6.7/8.5 HP
L09
11.6/13.8 HP
W11
25/36 HP
L11
37/52 HP
L12
L16
78/105 HP
A0410
A0411
A0413
I0410
I0411
I0413
E0410
E0411
E0413
L0913
L0914
L0918
W1118
W1122
L1114
L1118
L1122
L1222
L1614
L1616
L1618
L1622
900
750
550
900
750
550
1,000
825
600
1,325
1,150
700
1,500
1,000
2,500
1,500
1,000
1,000
3,250
2,500
1,975
1,300
ut
y
5.31 GPM @ 500 RPM
6.43 GPM @ 500 RPM
8.98 GPM @ 500 RPM
5.31 GPM @ 500 RPM
6.43 GPM @ 500 RPM
8.98 GPM @ 500 RPM
12.22 GPM @ 575 RPM
14.78 GPM @ 575 RPM
20.65 GPM @ 575 RPM
15.00 GPM @ 890 RPM
17.40 GPM @ 890 RPM
28.70 GPM @ 890 RPM
35.5 GPM @ 900 RPM
53.0 GPM @ 900 RPM
30.40 GPM @ 1275 RPM
50.30 GPM @ 1275 RPM
75.10 GPM @ 1275 RPM
88.00 GPM @ 400 RMP
46.80 GPM @ 1475 RPM
61.10 GPM @ 1475 RPM
77.30 GPM @ 1475 RPM
115.50 GPM @ 1475 RPM
Ga
llo
ns
p
In
Ca ter
pa mi
cit tte
y nt
D
ut
y
4.25 GPM @ 400 RPM
5.14 GPM @ 400 RPM
7.18 GPM @ 400 RPM
4.25 GPM @ 400 RPM
5.14 GPM @ 400 RPM
7.18 GPM @ 400 RPM
9.56 GPM @ 450 RPM
11.57 GPM @ 450 RPM
16.16 GPM @ 450 RPM
12.60 GPM @ 750 RPM
14.60 GPM @ 750 RPM
24.20 GPM @ 750 RPM
29.50 GPM @ 750 RPM
44.20 GPM @ 750 RPM
21.50 GPM @ 900 RPM
35.50 GPM @ 900 RPM
53.00 GPM @ 900 RPM
71.00 GPM @ 325 RPM
34.90 GPM @ 1100 RPM
45.60 GPM @ 1100 RPM
57.70 GPM @ 1100 RPM
86.10 GPM @ 1100 RPM
er
Re
Se
vo
al
lu
Di
tio
am
n
e
Nu
te
r(
m
in
be
)
ro
fC
St
ro
yl
in
ke
de
(in
rs
)
( Pump Selection Formula Fold-Out )
Co
Ca nti
pa nu
cit ou
y sD
Ra
te
d
M
od
el
Pu
m
p
Se
rie
s
Pr
es
su
r
e
(p
si)
HP Pump Specifications
0.0106
0.0129
0.0180
0.0106
0.0129
0.0180
0.0212
0.0257
0.0359
0.0606
0.0703
0.1162
0.1420
0.2121
0.0859
0.1420
0.2121
0.2314
0.1249
0.1632
0.2065
0.3085
1.250
1.375
1.625
1.250
1.375
1.625
1.250
1.375
1.625
1.625
1.750
2.250
2.250
2.750
1.750
2.250
2.750
2.750
1.750
2.000
2.250
2.750
2
2
2
2
2
2
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
1. Broad Product Line
Offer a broad array of BEAN piston and plunger pumps that serve a number of markets including industrial, oil &
gas, sewer cleaning, reverse osmosis, horizontal and vertical drilling, and agricultural
• The plunger pump product line can be customized to operate up to 700 HP, and achieve pressures in excess of
10,000 psi (690 bar), flows up to 1,594 gpm (6,034 lpm), and temperatures to 400 F (204 C)
• The BEAN piston pump product line range in size from 3 to 450 HP, and achieve pressures up to 3,000 psi (207 bar)
and flows up to 905 gpm (3,168 lpm)
• Offer a wide variety of materials that can handle numerous applications
•
2. Proven Quality & Reliability
Every pump is tested prior to shipment to ensure it
meets industry and customer standards
• Pumps manufactured in accordance with ISO-9001
quality standards • Heavy duty construction and
superior quality components, held to the highest
achievable tolerances result in the most durable
products on the market today
• Volumetric efficiencies up to 95%
• Mechanical efficiencies up to 97%
•
3. Technical Capabilities
Dedicated engineering department that partners
with the customer to find solutions.
• In house Product R&D focused on designing
products to ensure customer success.
• Advanced engineering knowledge concerning a
variety of markets and applications.
•
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
2.25
2.25
2.25
2.75
2.75
2.75
2.75
2.75
3.00
4.00
4.00
4.00
4.00
W
ei
gh
t(
lb
s)
Pu
m
p
Ty
pe
Le
ng
th
(in
)
W
id
th
(in
)
He
ig
ht
(in
)
M
ec
ha
ni
ca
lE
Ca
ffi
st
cie
Du
nc
ct
y
ile
Ca
Ir
st
o
n
Al
um
in
Ca
um
st
Br
St
ai
on
n
ze
le
HP
ss
-F
St
or
ee
ge
l
d
HP
Ca
-F
rb
or
on
ge
St
d
ee
AP
St
l
I- F
ai
nl
or
e
ss
ge
d
St
AP
Ca
ee
I- F
rb
l
on
or
ge
St
d
ee
St
l
ai
nl
es
sS
te
el
49
49
49
45
45
45
100
100
100
229
229
229
405
405
443
443
443
551
681
681
681
681
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
PISTON
5.60
5.60
5.60
16.50
16.50
16.50
9.0
9.0
9.0
24.75
24.75
24.75
31.0
31.0
32.50
32.50
23.50
35.00
39.25
39.25
39.25
39.25
8.00
8.00
8.00
8.00
8.00
8.00
8.50
8.50
8.50
12.25
12.25
12.25
16.00
16.00
16.00
16.00
16.00
18.00
17.50
17.50
17.50
17.50
20.50
20.50
20.50
7.50
7.50
7.50
17.50
17.50
17.50
11.00
11.00
11.00
13.5
13.5
13.50
13.50
13.50
12.75
15.50
15.50
15.50
15.50
85%
90%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
85%
































4. Cost Savings
Combination of component technology and
design increase operation time while decreasing
downtime, life cycle costs, and overall costs of
ownership.
• Designed to do more with less
• Ease of service
• Requires less energy, lowering the total cost of
ownership
•
5. Product Availability
Manufacturing facility utilizing the latest in
CNC machining centers, production planning
systems, 3D CAD/CAM systems, and order and
distribution systems.
• Robust established global supply chain
• Vast parts inventory resulting in reduced lead
times and exceptional aftermarket support
•

































6. Global Presence/Distribution Network
Strategically established distribution network that
ensures our products are easily accessible in a
number of regions and markets
• Market specific distributors capable of providing
the knowledge and service required to meet your
needs
•
7. Stable – Long Term Industry Leader
Consistently top ranked most admired company by
Fortune magazine
• Manufacturing pumps since 1884
• Industry leader since 1904
• Award winning pumps since 1915
•
8. Customer Service
•
•
Dedicated, market specific account managers
Dedicated Stephenville customer service support
representatives and distribution managers
A04 Piston Pump Data
2.6 BHP Continuous Duty (3.2 BHP Intermittent Duty)
A04
Specifications
Standard Cast ISO Drawing
Pump Model
A04 (metric)
Configuration
A04 Vertical Duplex Piston
Number of Pistons
2
Stroke Length
1.0 Inches (2.54 cm)
Frame Load Rating
1,140 lbs (517 kg)
Pump Weight (Average)
43 lbs (19.5 kg)
Direction of Rotation
Either
Internal Gear Ratio
NA
Intermittent Duty Speed Rating
500 RPM
Continuous Duty Speed Rating
400 RPM
Ball Valve Max Speed Rating
NA
Minimum Speed
300 RPM
Mechanical Efficiency
90%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
1 Quart (.96 Liters)
Lube Oil Type
SAE 30
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size
1.00 Inch NPT
Standard Discharge Size
0.50 Inch NPT
0.75 Inch NPT
Fluid End Material
Cast Iron, Aluminum Bronze
Valve Types
Disc Valves
Hydraulic Motor Mount
SAE A - 2 Bolt with 7/8”-13T
Performance Table
Pump Model
Piston
Diameter
(in) / (cm)
Displacement
(GAL/REV)
(LITERS/REV)
Maximum
Pressure
(PSI) / (BAR)
300 RPM
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
350 RPM
375 RPM
400 RPM
500 RPM
A0410
1.250 / 3.175
0.0106 / 0.0401
850 / 62.05
3.19/ 12.08
3.72 / 14.08
3.98 / 15.07
4.25 / 16.09
5.31 / 20.10
A0411
1.375 / 3.493
0.0129 / 0.0488
750 / 51.71
3.86/ 14.61
4.50 / 17.03
4.82 / 18.25
5.14 / 19.46
6.43 / 24.34
A0413
1.625 / 4.128
0.0180 / 0.0681
550 / 37.92
5.39/ 20.4
6.28 / 23.77
6.73 / 25.48
7.18 / 27.18
8.98 / 33.99
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
9
A04
Cast Pump Engineering Dimensional Outline
A04 NPSHr value for Standard Disc Valves
•
FMC recommends NPSHa (available) exceeds NPSHr (required)
by 5 feet of water.
•
Take special consideration when calculating NPSHa.
Recalculate NPSHa after pump model has been selected for
more accurate values.
•
NPSHr values are in feet of water. If you are pumping a
different liquid than water, convert the required NPSH from
water to the liquid being pumped by dividing the published
NPSHr value by the specific gravity of the liquid being pumped.
•
FMC published NPSHr values are based on test data collected
on specific pumps at the factory and are estimated values.
Actual NPSHr values for an ordered pump can only be
determined by a factor test. For NPSH critical applications,
contact the factory for additional information and request an
NPSHr test performed on your pump before shipment.
•
Pump drawing dimensions in inches.
30
25
Feet of H2O
20
A0413
RPM
15
A0411
A0410
10
5
0
300
400
500
600
For additional information visit FMCPumps.com
I04 Piston Pump Data
2.6 BHP Continuous Duty (3.2 BHP Intermittent Duty)
I04
Specifications
Standard Cast ISO Drawing
Pump Model
I04 (metric)
Configuration
I04 Horizontal Duplex Piston
Number of Pistons
2
Stroke Length
1.0 Inches (1.54 cm)
Frame Load Rating
1,140 lbs (517 kg)
Pump Weight (Average)
43 lbs (19.5 kg)
Direction of Rotation
Either
Internal Gear Ratio
NA
Intermittent Duty Speed Rating
500 RPM
Continuous Duty Speed Rating
400 RPM
Ball Valve Max Speed Rating
NA
Minimum Speed
100 RPM
Mechanical Efficiency
90%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
1 Quart (.946 Liters)
Lube Oil Type
SAE 30
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (-18.9°C Capacity)
Standard Suction Size
1.00 Inch NPT
Standard Discharge Size
0.50 Inch NPT
0.75 Inch NPT
Fluid End Material
Cast Iron, Aluminum Bronze
Valve Types
Disc Valves
Hydraulic Motor Mount
SAE A - 2 Bolt with 7/8”-13T
Performance Table
Pump Model
Piston
Diameter
(in) / (cm)
Displacement
(GAL/REV)
(LITERS/REV)
Maximum
Pressure
(PSI) / (BAR)
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
300 RPM
350 RPM
375RPM
400RPM
500RPM
I0410
1.250 / 3.175
0.0106 / 0.0401
850 / 62.05
3.19 / 12.08
3.72 / 14.08
3.98 / 15.07
4.25 / 16.09
5.31 / 20.10
I0411
1.375 / 3.493
0.0129 / 0.0488
750 / 51.71
3.86 / 14.61
4.50 / 17.03
4.82 / 18.25
5.14 / 19.46
6.43 / 24.34
I0413
1.625 / 4.128
0.0180 / 0.0681
550 / 37.92
5.39 / 20.4
6.28 / 23.77
6.73 / 25.48
7.18 / 27.18
8.98 /33.99
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
11
I04
Cast Pump Engineering Dimensional Outline
I04 NPSHr value for Standard Disc Valves
• FMC recommends NPSHa (available) exceeds NPSHr
(required) by 5 feet of water.
30
• Take special consideration when calculating NPSHa.
Recalculate NPSHa after pump model has been selected for
more accurate values.
25
Feet of H2O
20
I0413
RPM
15
I0411
I0410
10
5
0
300
400
500
600
• NPSHr values are in feet of water. If you are pumping a
different liquid than water, convert the required NPSH from
water to the liquid being pumped by dividing the published
NPSHr value by the specific gravity of the liquid being pumped.
• FMC published NPSHr values are based on test data
collected on specific pumps at the factory and are estimated
values. Actual NPSHr values for an ordered pump can only be
determined by a factor test. For NPSH critical applications,
contact the factory for additional information and request an
NPSHr test performed on your pump before shipment.
• Pump drawing dimensions in inches.
For additional information visit FMCPumps.com
E04 Piston Pump Data
6.7 BHP Continuous Duty (8.5 BHP Intermittent Duty)
E04
Specifications
Standard Cast ISO Drawing
Pump Model
E04 (metric)
Configuration
Verticle Quadruplex Piston
Number of Pistons
4
Stroke Length
1.0 Inches (2.54 cm)
Frame Load Rating
1,240 lbs (562.45 kg)
Pump Weight (Average)
80 lbs (36.29 kg)
Direction of Rotation
Either
Internal Gear Ratio
1:1
Intermittent Duty Speed Rating
575 RPM
Continuous Duty Speed Rating
450 RPM
Ball Valve Max Speed Rating
NA
Minimum Speed
390 RPM
Mechanical Efficiency
85%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
1 Quart (.964 Liters)
Lube Oil Type
SAE 30
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size
1.25 Inch NPT
Standard Discharge Size
0.75 Inch NPT
Fluid End Material
Cast Iron, Aluminum Bronze
Valve Types
Disc Valves
Hydraulic Motor Mount
SAE A - 2 Bolt with 1”-6B
Performance Table
Pump Model
Piston
Diameter
(in) / (cm)
Displacement
(GAL/REV)
(LITERS/REV)
Maximum
Pressure
(PSI) / (BAR)
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
390 RPM
400 RPM
425RPM
450RPM
575 RPM
E0410
1.250 / 3.175
0.0212 / 0.0803
1,000 / 68.95
8.29 / 31.38
8.50 / 32.18
9.03 / 34.18
9.56 / 36.19
12.22 / 46.26
E0411
1.375 / 3.493
0.0257 / 0.0973
800 / 55.16
10.03 / 37.97
10.28 / 38.91
10.93 / 41.37
11.57 / 43.8
14.78 / 55.95
E0413
1.625 / 4.128
0.0359 / 0.1359
600 / 41.37
14.01 / 53.03
14.36 / 54.36
15.26 / 57.77
16.16 / 61.17
20.65 / 78.17
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
13
E04
Cast Pump Engineering Dimensional Outline
E04 NPSHr value for Standard Disc Valves
• FMC recommends NPSHa (available) exceeds NPSHr
(required) by 5 feet of water.
30
• Take special consideration when calculating NPSHa.
Recalculate NPSHa after pump model has been selected for
more accurate values.
25
Feet of H2O
20
E0413
15
E0411
E0410
10
5
• FMC published NPSHr values are based on test data
collected on specific pumps at the factory and are estimated
values. Actual NPSHr values for an ordered pump can only be
determined by a factor test. For NPSH critical applications,
contact the factory for additional information and request an
NPSHr test performed on your pump before shipment.
RPM
0
300
400
• NPSHr values are in feet of water. If you are pumping a
different liquid than water, convert the required NPSH from
water to the liquid being pumped by dividing the published
NPSHr value by the specific gravity of the liquid being
pumped.
500
600
• Pump drawing dimensions in inches.
For additional information visit FMCPumps.com
L09 Piston Pump Data
11.6 BHP Continuous Duty (13.8 BHP Intermittent Duty)
L09
Specifications
Standard Cast ISO Drawing
Pump Model
L09 (metric)
Configuration
Horizontal Triplex Piston
Number of Pistons
3
Stroke Length
2.25 Inches (5.715 cm)
Frame Load Rating
2,800 lbs (1,270 kg)
Pump Weight (Average)
200 lbs (90.7 kg)
Direction of Rotation
Top of shaft away from head
Internal Gear Ratio
3.6:1
Intermittent Duty Speed Rating
890 RPM
Continuous Duty Speed Rating
750 RPM
Ball Valve Max Speed Rating
625 RPM
Minimum Speed
360 RPM
Mechanical Efficiency
85%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
2.25 Quarts (2.13 Liters)
Lube Oil Type
SAE 30
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (-28.9°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (121°C Capacity)
Standard Suction Size
1.50 Inch NPT
Standard Discharge Size
1.00 Inch NPT
Fluid End Material
Cast Iron
Valve Types
Disc Valves, Ball Valves
Hydraulic Motor Mount
SAE B - 4 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
Performance Table
Pump Model
Piston
Diameter
(in) / (cm)
Displacement
(GAL/REV)
(LITERS/REV)
Maximum
Pressure
(PSI) / (BAR)
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
350 RPM
625 RPM
700 RPM
750 RPM
890 RPM
L0913
1.625 / 4.128
0.0168 / 0.0636
1,200 / 82.74
5.9 / 22.33
10.5 / 39.75
11.8 / 44.67
12.6 / 47.70
15.0 / 56.78
L0914
1.750 / 4.445
0.0195 / 0.0738
1,000 / 68.95
6.8 / 25.74
12.2 / 46.18
13.7 / 51.86
14.6 / 55.27
17.4 / 65.87
L0918
2.250 / 5.715
0.0323 / 0.1223
700 / 48.26
11.3 / 42.78
20.2 / 76.47
22.6 / 85.55
24.2 / 91.61
28.7 / 108.64
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
15
L09
Cast Pump Engineering Dimensional Outline
L09 NPSHr value for Standard Ball Valves
30
30
25
25
20
20
L0918D
15
L0914D
10
Feet of H2O
Feet of H2O
L09 NPSHr value for Standard Disc Valves
L0918B
15
L0914B
10
5
5
0
0
RPM
200
300
400
500
600
700
RPM
200
300
400
500
600
700
• FMC recommends NPSHa (available) exceeds NPSHr (required) by 5 feet of water.
• Take special consideration when calculating NPSHa. Recalculate NPSHa after pump model has been selected for more accurate values.
• NPSHr values are in feet of water. If you are pumping a different liquid than water, convert the required NPSH from water to the liquid being
pumped by dividing the published NPSHr value by the specific gravity of the liquid being pumped.
• FMC published NPSHr values are based on test data collected on specific pumps at the factory and are estimated values. Actual NPSHr values
for an ordered pump can only be determined by a factor test. For NPSH critical applications, contact the factory for additional information and
request an NPSHr test performed on your pump before shipment.
• Pump drawing dimensions in inches.
For additional information visit FMCPumps.com
W11 Piston Pump Data
30 BHP Continuous Duty (36 BHP Intermittent Duty)
W11
Specifications
Standard Cast ISO Drawing
Pump Model
W11 (metric)
Configuration
Horizontal Triplex Piston
Number of Pistons
3
Stroke Length
2.75 Inches (6.985 cm)
Frame Load Rating
6,000 lbs (2,721.6 kg)
Pump Weight (Average)
425 lbs (192.86 kg)
Direction of Rotation
Top of pinion shaft away from
head
Internal Gear Ratio
3.6:1
Intermittent Duty Speed Rating
900 RPM
Continuous Duty Speed Rating
750 RPM
Ball Valve Max Speed Rating
900 RPM
Minimum Speed *
360 RPM
Mechanical Efficiency
85%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
1 Gallon (3.78 Liters)
Lube Oil Type
SAE 30
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size
2.00 Inch NPT
Standard Discharge Size
1.25 Inch NPT
Fluid End Material
Cast Iron
Valve Types
Disc Valves, Ball Valves
Hydraulic Motor Mount
SAE C - 2 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
* Slower RPM can be achieved with the addition of a pressurized lubrication system
Performance Table
Pump Model
W1118
Piston
Diameter
(in) / (cm)
2.250 / 5.715
Displacement
(GAL/REV)
(LITERS/REV)
0.0394 / 0.1491
Maximum
Pressure
(PSI) / (BAR)
1,000 / 68.95
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
14.2 / 53.75
W1122
2.750 / 6.985
0.0589 / 0.2230
1,000 / 68.95
21.2 / 80.25
360 RPM
500 RPM
635 RPM
750 RPM
900 RPM
19.7 / 74.57
25.0 / 94.64
29.5 / 111.67
35.5 / 134.38
29.5 / 111.67
37.4 / 141.57
44.2 / 167.32
53.0 / 200.63
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
17
W11
Cast Pump Engineering Dimensional Outline
W11 NPSHr value for Standard Disc Valves W11 NPSHr value for Standard Ball Valves
30
30
25
25
20
W1122D
15
W1118D
10
Feet of H2O
Feet of H2O
20
W1122B
15
W1118B
10
5
5
0
0
300
400
500
600
700
800
900
300
RPM (available) exceeds NPSHr (required) by 5 feet of water.
• FMC recommends NPSHa
400
500
600
700
RPM
• Take special consideration when calculating NPSHa. Recalculate NPSHa after pump model has been selected for more accurate values.
• NPSHr values are in feet of water. If you are pumping a different liquid than water, convert the required NPSH from water to the liquid
being pumped by dividing the published NPSHr value by the specific gravity of the liquid being pumped.
• FMC published NPSHr values are based on test data collected on specific pumps at the factory and are estimated values. Actual NPSHr
values for an ordered pump can only be determined by a factor test. For NPSH critical applications, contact the factory for additional
information and request an NPSHr test performed on your pump before shipment.
• Pump drawing dimensions in inches.
For additional information visit FMCPumps.com
L11 Piston Pump Data
37 BHP Continuous Duty (52 BHP Intermittent Duty)
L11
Specifications
Standard Cast ISO Drawing
Pump Model
L11 (metric)
Configuration
Horizontal Triplex Piston
Number of Pistons
3
Stroke Length
2.75 Inches (6.985 cm)
Frame Load Rating
6,000 lbs (2,721.6 kg)
Pump Weight (Average)
460 lbs (208.7 kg)
Direction of Rotation
Top of pinion shaft away from head
Internal Gear Ratio
3.6:1
Intermittent Duty Speed Rating
1,275 RPM
Continuous Duty Speed Rating
900 RPM
Ball Valve Max Speed Rating
1050 RPM
Minimum Speed *
360 RPM
Mechanical Efficiency
85%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
1 Gallon (3.78 Liters)
Lube Oil Type
SAE 30
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size
2.50 Inch NPT
Standard Discharge Size
1.25 Inch NPT
Fluid End Material
Ductile Iron, Nickel Aluminum
Bronze
Valve Types
Disc Valves, Ball Valves, Abrasion
Resistant (AR) Valves
Hydraulic Motor Mount
SAE C - 2 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
* Slower RPM can be achieved with the addition of a pressurized lubrication system
Performance Table
Pump Model
Piston
Diameter
(in) / (cm)
Displacement
(GAL/REV)
(LITERS/REV)
Maximum
Pressure
(PSI) / (BAR)
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
360 RPM
690 RPM
900 RPM
1,050 RPM
1275 RPM
L1114
1.750 / 4.445
0.0239 / 0.0905
2,500 / 172.37
8.6 / 32.55
16.5 / 62.46
21.5 / 81.39
25.1 / 95.01
30.4 / 115.08
L1118
2.250 / 5.715
0.0394 / 0.1491
1,500 / 103.42
14.2 / 53.75
27.2 / 102.96
35.5 / 134.38
41.4 / 156.72
50.3 / 190.41
L1122
2.750 / 6.985
0.0589 / 0.2223
1,000 / 68.95
21.2 /80.25
40.7 / 154.07
53.0 / 200.63
61.9 / 234.32
75.1 / 284.28
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation: BHP = (GPM * PSI) / (1714 *
0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
19
L11
Cast Pump Engineering Dimensional Outline
L11 NPSHr value For Standard Ball Valves
30
30
25
25
20
20
L1122D
15
L1118D
10
Feet of H2O
Feet of H2O
L11 NPSHr value For Standard Disc Valves
L1122B
15
L1118B
10
5
5
0
600
700
800
RPM 1000
900
0
1100
1200
1300
200
300
RPM
400
500
600
700
• FMC recommends NPSHa (available) exceeds NPSHr (required) by 5 feet of water.
• Take special consideration when calculating NPSHa. Recalculate NPSHa after pump model has been selected for more accurate values.
• NPSHr values are in feet of water. If you are pumping a different liquid than water, convert the required NPSH from water to the liquid
being pumped by dividing the published NPSHr value by the specific gravity of the liquid being pumped.
• FMC published NPSHr values are based on test data collected on specific pumps at the factory and are estimated values. Actual NPSHr
values for an ordered pump can only be determined by a factor test. For NPSH critical applications, contact the factory for additional
information and request an NPSHr test performed on your pump before shipment.
• Pump drawing dimensions in inches.
For additional information visit FMCPumps.com
L12 Piston Pump Data
52 BHP Continuous Duty (64 BHP Intermittent Duty)
L12
Specifications
Standard Cast ISO Drawing
Pump Model
A04 (metric)
Configuration
L12 Horizontal Triplex Piston Pump
Number of Pistons
3
Stroke Length
3.0 Inches (7.62 cm)
Frame Load Rating
6,000 lbs (2,721 kg)
Pump Weight (Average)
600 lbs (272 kg)
Direction of Rotation
Top of Crank Toward Fluid End
Internal Gear Ratio
NA
Intermittent Duty Speed Rating
400 RPM
Continuous Duty Speed Rating
325 RPM
Ball Valve Max Speed Rating
NA
Minimum Speed
100 RPM
Mechanical Efficiency
90%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
4 Quarts (3.8 Liters)
Lube Oil Type
SAE 30
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (-28.9°C Capacity)
Standard Suction Size
3.00 or 2.5 Inch NPT
Standard Discharge Size
1.25 Inch NPT
1.50 Inch NPT
Fluid End Material
Ductile Iron
Valve Types
Disc Valves + AR Valves
Hydraulic Motor Mount
Consult Engineering
Performance Table
Pump Model
L1222
Piston
Diameter
(in) / (cm)
Displacement
(GAL/REV)
(LITERS/REV)
Maximum
Pressure
(PSI) / (BAR)
100 RPM
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
200 RPM
300 RPM
325 RPM
400 RPM
2.750 / 7.0
0.2314 / 0.8759
1000 / 68.95
22/ 83.28
44 / 166.56
66 / 249.84
71 / 268.76
88 / 333.12
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
21
L12
Cast Pump Engineering Dimensional Outline
For additional information visit FMCPumps.com
L16 Piston Pump Data
78 BHP Continuous Duty (105 BHP Intermittent Duty)
L16
Specifications
Standard Cast ISO Drawing
Performance Table
Pump Model
Piston
Diameter
(in) / (cm)
Displacement
(GAL/REV)
(LITERS/REV)
Pump Model
L16 (metric)
Configuration
Horizontal Triplex Piston
Number of Pistons
3
Stroke Length
4.0 Inches (10.16 cm)
Frame Load Rating
7,850 lbs (3,560.7 kg)
Pump Weight (Average)
705 lbs (319.78 kg)
Direction of Rotation
Top of pinion shaft away from
head
Internal Gear Ratio
3.94:1
Intermittent Duty Speed Rating
1,475 RPM
Continuous Duty Speed Rating
1,100 RPM
Ball Valve Max Speed Rating
900 RPM
Minimum Speed *
394 RPM
Mechanical Efficiency
85%
Lubrication System (Standard)
Splash, Gravity Return
Lube Oil Capacity
10 Quarts (37.8 Liters)
Lube Oil Type
SAE 80W90
Maximum Fluid Temperature
140 °F (250 °F Capability)
60°C (121°C Capacity)
Minimum Fluid Temperature
0 °F (-20 °F Capability)
-17.8°C (-28.91°C Capacity)
Standard Suction Size
STD - 2.50 Inch NPT
HV - 3.00 Inch NPT
Standard Discharge Size
STD - 1.25 Inch NPT
HV - 2.00 Inch NPT
Fluid End Material
Ductile Iron, Nickel Aluminum
Bronze
Valve Types
Disc Valves, Ball Valves, Abrasion
Resistant (AR) Valves
Hydraulic Motor Mount
SAE C - 2 Bolt with 1.25”-14T
SAE C - 4 Bolt with 1.25”-14T
* Slower RPM can be achieved with the addition of a pressurized lubrication system
Maximum
Pressure
(PSI) / (BAR)
Pump Capacity (GPM) / (Liters/Min) @ Input Speed (RPM)
394 RPM
750 RPM
900 RPM
1100 RPM
1475 RPM
L1614
1.750 / 4.445
0.0317 / 0.1200
2,500 / 172.37
12.5 / 47.32
23.8 / 90.09
28.5 / 107.88
34.9 / 132.11
46.8 / 177.16
L1616
2.000 / 5.08
0.0414 / 0.1567
2,500 / 172.37
16.3 / 61.70
31.1 / 117.73
37.3 / 141.20
45.6 / 172.61
61.1 / 231.29
L1618
2.250 / 5.715
0.0524 / 0.1984
2,000 / 137.90
10.7 / 40.50
39.3 / 148.77
47.2 / 178.67
57.7 / 218.42
77.3 / 292.61
L1622
2.750 / 6.985
0.0783 / 0.2964
1,300 / 89.63
30.9 / 116.97
58.7 / 222.20
70.5 / 266.87
86.1 / 325.92
115.5 / 437.22
* Horsepower based on 85 or 90% mechanical efficiency. Actual application horsepower requirements can be calculated using the equation:
BHP = (GPM * PSI) / (1714 * 0.85 or 0.90)
* Pump capacities shown are based on 100% volumetric efficiency.
* Dimensions shown are for general sizing purposes and should not be used for construction. Contact FMC for actual dimensions of pump ordered.
* FMC reserves the right to modify this information without prior notice.
STD = Standard Fluid Cylinder
HV = High Volume Fluid Cylinder
23
L16
Cast Pump Engineering Dimensional Outline
Standard Fluid End Shown
• FMC recommends NPSHa (available) exceeds NPSHr (required) by 5 feet of water.
• Take special consideration when calculating NPSHa. Recalculate NPSHa after pump model has been selected for more accurate values.
• NPSHr values are in feet of water. If you are pumping a different liquid than water, convert the required NPSH from water to the liquid
being pumped by dividing the published NPSHr value by the specific gravity of the liquid being pumped.
• FMC published NPSHr values are based on test data collected on specific pumps at the factory and are estimated values. Actual NPSHr
values for an ordered pump can only be determined by a factor test. For NPSH critical applications, contact the factory for additional
information and request an NPSHr test performed on your pump before shipment.
• Pump drawing dimensions in inches.
For additional information visit FMCPumps.com
Manufacturing
FMC Technologies Inc
2825 West Washington
500 N. Sam Houston Pkwy W.
Stephenville, TX 76401
Houston, TX 77067
800 772 8582
281 260 2121
www.fmctechnologies.com
© FMC 2012, FMC Technologies, Inc. (08/27)