303190E , Product Selection Guide, Equipment, Spare Parts

Transcription

PRODUCT SELECTION GUIDE
Equipment, Spare Parts & Accessories
P R O V E N Q U A L I T Y. L E A D I N G T E C H N O L O G Y.
TABLE OF CONTENTS
Chapter 1a
PNEUMATIC PISTON PUMPS
®
®
- Fast-Flo , Fast-Ball and Standard
®
- Fire-Ball , Falcon™ (Oil and Grease)
- Falcon™ 10:1, 20:1
®
- Monark
®
- President
®
- Merkur
- Senator™
®
- Bulldog
®
- King
®
- Premier
®
- Orion
- Glutton™
- DynaMite™
1a, 4 – 5
1a, 6 – 7
1a, 8 – 9
1a, 10 – 15
1a, 16 – 21
1a, 22 – 23
1a, 24 – 25
1a, 26 – 31
1a, 32 – 37
1a, 38 – 39
1a, 40 – 41
1a, 42
1a, 43
Chapter 1b
NXT™ MOTORS
- NXT™ Air motor
®
- Xtreme units, packages, pumps & lowers
- Dura-Flo™, packages, pumps & lowers
®
- High-Flo , packages, pumps & lowers
- E-Flo™
®
- Check-Mate ram, pumps & lowers
1b, 2
1b, 5 – 14
1b, 15 – 21
1b, 22 – 27
1b, 28
1b, 30 - 42
Chapter 2
HYDRAULIC PISTON PUMPS
®
- Viscount
®
- Dyna-Star
2, 1 – 4
2, 5
Chapter 3
ELECTRICALLY OPERATED UNITS
®
- Magnum , 190ES™, 395/495 ST™ Pro
3, 1 – 2
®
- Ultra Max, Mark V™, Mark V™ SpackMax,
T-Max™, GTX™, RTX™
3, 3 − 4
- HVLP turbine unit
3, 5 – 6
Chapter 4
PETROL OPERATED UNITS
- GM 3000-GM 7900, HydraMax™
4, 1 – 2
- GH™ 733, GH™ Roof Rigs, LineLazer™
®
- G-Force™ & Hydra-Clean accessory
4, 3 – 4
Chapter 5
DIAPHRAGM PUMPS
- Husky™ 205, 307
- Husky™ 515, 716
- Husky™ 1040, 1590, 2150, 3150, 3275
- Husky™ units
®
- Triton 1:1 Pump
®
- Triton units
®
- Triton 3:1 Type 308HP
®
- Triton 3:1 Type 1030HP
Chapter 6
TWO COMPONENT UNITS
®
- Fixed / Variable Hydra-Cat
- Quick-set
- Xtreme Mix™ 185, Xtreme-Mix™
- Xtreme Mix™ 290-500
- ProMix™ Easy
- ProMix™ II
®
- Reactor
- Guns
- Accessories
5, 1 – 2
5, 3 – 6
5, 7 – 17
5, 18
5, 19
5, 20
5, 21
5, 22
6, 1 – 2
6, 3
6, 4
6, 5
6, 7 – 8
6, 9
6, 11 – 12
6, 13 – 14
6, 15 – 16
All information is subject to change without notice.
Santoprene® trademark belongs to Monsanto
Kynar® (PVDF) trademark belongs to Atochem North America, Inc.
All other trademarks mentioned in this catalogue belong to Graco Inc.
Chapter 7
DISPENSE VALVES & COLOUR CHANGE UNITS
DOSING & DISPENSING UNITS
- Snuffer gun & dispense valves
7, 1 – 2
- Fluid needles
7, 3
- Colour change units
7, 4
- ProBatch™
7, 5
®
- Informer
7, 6
- PR70™
7, 8
Chapter 8
APPLICATION GUNS, VALVES & ROLLERS
- Hot-melt guns
8, 1
- Precision-Flo™, PrecisionSwirl™
8, 2
- Electrostatic
8, 3 – 6
- Air gun / HVLP
8, 7 – 12
- Airless, AA & extrusion guns
8, 13 – 18
- Gun accessories
8, 19 – 22
- Paint rollers and extensions
8, 23 – 26
- Cartouche gun accessories
8, 27
Chapter 9
MATERIAL FILTERS & SURGE SUPPRESSORS
- Material filter
9, 1 - 4
- Surge suppressor
9, 5 - 6
Chapter 10
FLUID REGULATORS
- NPT & accessories
- BSP & accessories
- Gun mounted
10, 1 - 2
10, 3 - 4
10, 5
Chapter 11
AIR PRESSURE GAUGES
11, 1 - 1
Chapter 12
AIR FILTERS, REGULATORS & LUBRICATORS
12, 1 - 2
Chapter 13
CARTS & ELEVATORS
13, 1 - 2
Chapter 14
RAMS, STANDS & ACCESSORIES
14, 1 - 2
Chapter 15
WALL, DRUM BRACKETS, SUCTION KITS 15, 1 - 2
Chapter 16
AGITATORS
16, 1 - 3
Chapter 17
HEATERS
17, 1
Chapter 18
PRESSURE POTS
18, 1 - 2
Chapter 19
DISPENSING GUNS, HOSE REELS
19, 1 - 2
Chapter 20
DRUM COVERS, FOLLOW PLATES
20, 1 - 2
Chapter 21
AIR MOTORS & HYDRAULIC MOTORS
LUBRICANTS & TOOLS
21, 1 - 6
TABLE OF CONTENTS
Chapter 22
HOSES, FITTINGS, SWIVELS, VALVES
- Hoses
- Hose accessories
- High and low pressure fittings
- Ball dump valve material
- Air-valve, fittings
- Material & valve swivels
- Hose couplings
22, 1 - 7
22, 8 - 9
22, 10 - 14
22, 15
22, 16
22, 17
22, 18
Chapter 23
TIPS, NOZZELS, AIRLESS ACCESSORIES 23, 1 - 13
Chapter 24
TECHNICAL DATA
24, 1 – 7
All information is subject to change without notice.
Santoprene® trademark belongs to Monsanto
Kynar® (PVDF) trademark belongs to Atochem North America, Inc.
All other trademarks mentioned in this catalogue belong to Graco Inc.
FAST-FLO, FAST-BALL & STANDARD PUMP/EQUIPMENT
Fast-Ball
222 051
222 103
Fast-Flo
222 602
226 944
226 945
237 130
237 131
237 132
239 702
226 940*
226 941*
226 942*
226 946*
237 129*
237 134*
226 951
Standard
Delivery Pump
Accessories
224 570
206 265
225 815
295 616
256 200
226 040
223 954
205 585
215 965
13/02/09 11:38
1a - 4
FAST-FLO, FAST-BALL & STANDARD PUMP / EQUIPMENT
Part No.
222 051
222 103
CE
226 944
237 130
237 131
226 945
237 132
226 941
226 940
237 134
226 946
226 942
237 129
226 953┼
226 951
Description
1:1 Fast Ball, Short , CS
(polyureth./ leather/ rubber)
1:1 Fast Ball, 200 l, CS
(polyureth./ leather/ rubber)
1:1 Fast Flo, Short, CS
(PE)
(leather)
(PTFE)
1:1 Fast Flo, Short, SST,
(PE)
1:1 Fast Flo, Short, SST,
(PTFE)
1:1 Fast Flo, 200 l, CS
(PE), bunghole adapter
(leather), Bung
(PTFE), bunghole adapter
1:1 Fast Flo, 200 l,CS, PTFE
bunghole adapter airtight
1:1 Fast Flo, 200 l, SST,
(PE), bunghole adapter
1:1 Fast Flo, 200 l, SST,
(PTFE)
1:1 Fast Flo, 200 L SST,
(rubber) bunghole adapter
1:1 Fast Flo Adj., CS,
(rubber) bunghole adapter
256 200
2:1 Delivery pump, SST
295 616
2:1 Delivery pump, SST
223 954
2:1 Standard, Short SST,
(PTFE)
2:1 Standard, 200 l, SST,
(PTFE)
226 040
222 602
Accessories
bare pump,
for pump extention see page 84/85
pump with extention, bung - mount
pump 200L drum
Air needle valve, quick-disconnect
Motor 223 099 (307 456), Lower 215 957
Motor 223 099 (307 456), Lower 237 254
Motor 223 099 (307 456), Lower 237 255
Motor 223 099 (307 456), Lower 215 958
Motor 223 099 (307 456), Lower 237 256
Motor 223 099 (307 456), Lower 215 954
Motor 223 099 (307 456), Lower 215 953
Motor 223 099 (307 456), Lower 237 449
Motor 215 963 (307 456), Lower 217 383
Motor 223 099 (307 456), Lower 215 955
Motor 223 099 (307 456), Lower 237 253
Motor 223 099 (307 456), Lower 220 440
Air control, quick-disconnect, telescopic
extention, Buna N - O-Ring
Motor 223 099 (307 456), Lower 218 116
for delivery Polyurethan, Polyurea and similar
not flammable materials, 95cm³ / cycle
for delivery Polyurethan, Polyurea and similar
not flammable materials, 239cm³ / cycle
Bare Pump
Motor 223 953 (307 851), Lower 223 955
Bare Pump
Motor 204 722 (307 851), Lower 204 724
239 702
1:1 Fast Ball, 200 l,
(for 60 l, change the suction tube)
1:1 Fast Ball, 200 l,
225 815
2:1 Standard, 200 l, circulation pump
224 570
2:1 Standard, 19 l, 5 gal, Duo, SST
205 585
2:1 Standard, 19 l, 5 gal, CS,
(UHMWPE)
206 265
215 965┼
Discharge tube ¾″ galvanized steel
Pump extention 265 mm, 1 ½″ NPT(A) and 1 ½“ NPT(I)
Notice:
Air control Kit, 1,8m Air hose, valve kit
(Pump 222 103)
Air control Kit, 1,8 m air hose, valve kit
(Pump 222 103)
Pump, cover, agitator, hose set
(Pump 204 456)
Pump, cover, agitator,
(Pump 223 954)
Pump, cover, agitator, return throttle
(Pump 205 595)
┼ not shown
2:1 Standard Pump
- recommend only for use in bins
- not for wall mount (Packing dribble)
13/02/09 11:38
1a - 5
Rep Kit Application Manual
Lower
247 431 Delivery
307 906
(Oil)
247 431 Delivery
307 906
(Oil)
215 964 Delivery
307 427
213 012 Delivery
307 427
213 013 Delivery
307 427
215 964 Delivery
307 427
213 013 Delivery
307 427
215 964 Delivery
307 427
213 012 Delivery
307 427
213 013 Delivery
307 427
213 013 Delivery
Isocyanate
215 964 Delivery
307 552
213 013 Delivery
307 427
213 112 Delivery
307 427
218 012 Delivery
307 427
247 967 Delivery
Isocyanate
258 003 Delivery
Isocyanate
312 766
224 005
Delivery
307 026
224 005
Delivery
307 026
Delivery
307 637
Delivery
307 637
Delivery
306 560
Airspray
308 211
Airspray
306 713
207 848
e.g. 226 940 for 1040 litre containers
307 427
311 882
307 427
307 459
FAST-FLO, FAST-BALL & STANDARD PUMP/EQUIPMENT
114 829
239 877
112 202
246 775
203 876
226 290
248 097
203 872
203 857
204 254
222 087
237 526
238 108
205 626
222 065
222 095
239 887
239 888
965 129
205 394
205 395
239 729
239 730
226 269
206 699
206 700
206 405
246 911
225 827
225 852
225 640
225 931
246 914
225 014
223 108
244 635
13/02/09 11:38
225 853
225 786
222 069
240 885CE
246 916
225 026
CE
240 881
225 006
226 012
CE
240 886
6880273
246 916
225 016
225 781
244 636
1a - 6
222 073
246 913
225 773
226 013
226 018
244 637
244 905
244 906
FIRE-BALL, OIL AND GREASE PUMP/EQUIPMENT
Part No.
114 829
112 202
226 290
Description
Hand Pump
Diaphragm hand pump
Rotary hand pump
Accessories (CM = Check-Mate)
Telescopic tube, 0,38 liters per stroke
For 2″ bunghole, per stroke 3,8 l
For 2″ bunghole, 55 L light oil
Rep Kit
246 775
248 097
203 876
203 872
203 857
204 254
222 087
237 526
238 108
205 626
222 065
222 095
965 129
206 405
206 699
206 700
246 909┼
246 780┼
246 781┼
239 877
239 887
239 888
205 394
205 395
239 729
239 730
3:1 Fire Ball 225, Short
5:1 Fire Ball 300, 60 l
5:1 Fire Ball 300, 200 l
5:1 Fire Ball 300, 200 l
5:1 Fire Ball 300, 1040 l, Tank
10:1 Fire Ball 425, 200 l, cover
10:1 Fire Ball 425, 200 l, bung.
10:1 Fire Ball 425, 200 l
15:1 Fire Ball 300, 16kg, 5gal.
15:1 Fire Ball 300, 60kg
50:1 Fire Ball 225, 16kg, 35lb
50:1 Fire Ball 225, 55kg, 120lb
50:1 Fire Ball 225, 180 kg, 400 lb
50:1 Fire Ball 300, 16kg, 5gal.
50:1 Fire Ball 425, 120lb, 55kg
50:1 Fire Ball 425, 200kg,
75:1 Fire Ball 425, 120lb, 55kg
75:1 Fire Ball 425, 200kg,
Bare pump
Pump with , (15C 502)
Bare pump
Bare pump
Bare pump, cover,
Bare pump, 2“ bunghole
Incl. extention 1221mm
Bare pump
Bare pump
Bare pump
Bare pump, tube Ø 53,9mm. CM
Bare pump
Bare pump
Bare pump
Bare pump
Bare pump
Bare pump
Bare pump
Bare pump
Bare pump
Bare pump, CM,
Bare pump, CM, tube Ø 41,3mm
Bare pump, CM,
Bare pump, CM, tube Ø 41,3mm
246 918
225 852
225 640
225 931
225 853
225 786
226 269
5:1 Fire Ball 300, 200 l, bungl.
5:1 Fire Ball 300, 1040 L, tank
10:1 Fire Ball 425, 200 l, bung.
15:1 Fireball, 300, 200 kg
222 069
240 885CE
226 012
240 886 CE
6880 273
50:1 Fire Ball 300, 16 kg (5 gal),
Handluber
50:1 Fire Ball 300, 16kg, 35 lb,
5 gal. grease unit
50:1 Fire Ball 300 16kg (5 gal.)
Wax Unit
50:1 Fire Ball 225,
35 - 50 lbs
50:1 Fire Ball 300, dto
50:1 Fire Ball 225,
35 50 lbs
50:1 Fire Ball 225, 60 kg,
lubricating unit
50:1 Fire Ball 300, 120 lb, 55 kg,
lubricating unit
50:1 Fire Ball 225, 120lb, 55 kg
50:1 Fire Ball 300, 120 lb, 55 kg,
50:1 Fire Ball 425, 120 lb, 55 kg,
75:1 Fire Ball 425, 120 lb, 55 kg
50:1 Fire Ball 225, 200 kg
50:1 Fire Ball 300, 200 kg
50:1 Fire Ball 425, 200 kg, CM
75:1 Fire Ball 425, 200 kg
50:1 Fire Ball 300, 200 kg
50:1 Fire Ball 425, 3″ Ram
75:1 Fire Ball 425, 3″ Ram
0,45m hose
1,8m hose
1,8m hose
0,45m hose
1,8m hose
Complete, pump, air regulator, drumcover,
7,5m hose, gun, tip
Pump 5 gal, cover, 3,6m hose, lubricating
gun
Pump 5 gal, cart , 3,6m hose, lubricating
gun
Pump with 2 wheel cart, hand elevator,
follower plate, without hose gun
Pump, cover hose gun kit without follower
plate for Grease NLGI 0 – 00
246 911
225 827
246 913
225 773
246 916
225 026
222 073
246 914
225 014
223 108
244 635
246 916
225 016
225 781
244 636
226 013
226 018
244 637
244 905
244 906
Pump, cover, hose-gun kit, 2 wheel cart
without follower plate
Complete for 120 lbs Drum, 2 wheel cart
225 006 is on 4 roller cart
Model 240 881*, dto
Air and materialhose 1,8m, pneumatic
elevator with follow plate
Drumcover, follower plate, 1,8m hose kit
Elevator
200 kg, 1,8m hose Kit
┼ not shown
13/02/09 11:38
1a - 7
Application Manual
308 896
Oil
Delivery
238 286
Oil Delivery
237602
238225
238751
237498
206925
Grease
Delivery
246920
241623
Grease
Delivery
239320
239734
238286
238751
237498
206925
Oil
Delivery
U/B Airless
306 876
309 869
309 869
309 869
309 869
309 869
309 869
309 869
309 869
309 869
309 868
309 868
308 655
309 407
306 531
306 531
306 531
309 966
309 966
309 966
308 883
308 883
308 883
306 674
306 674
308 777
308 777
306 520
307 883
307 883
306 520
307 883
307 879
307 878
Lubrication
307 878
241623
Wax coating
3Y7 878
246920
309 957
241623
246920
307 878
309 957
Lubrication
241623
246920
307 878
309 957
241623
307 878
306 523
246920
241623
239320
239734
246920
241623
239320
239734
241623
239320
239734
239320
239734
309 957
307 880
307 880
307 880
309 957
307 880
307 880
307 880
306 556
306 556
306 556
309 345
309 345
Grease
Delivery
FALCON
241 594
241 595
15D 077
232 833
232 835
232 836
232 838
288 124
232 810
288 127
232 815
13/02/09 11:38
232 812
232 817
1a - 8
288 126
232 820
232 822
288 129
232 823
233 938
288 125
233 064
288 128
233 939
Air Motor 241 594 Falcon
10:1
Air Motor 241 595 Falcon II 20:1
Manual: 308 995
Falcon (241 504)
Falcon II (241 505)
Rep Kit 241 833 Air - Motor
Rep Kit 241 884 Valve Air Motor
Rep Kit 241 834
Rep Kit 241 884 Valve Air Motor
Ratio: 10 :1
Max working pressure: 10,4 bar
Fluid flow per cycle: 0,19 liter
Air inlet size: 3/8”
Fluid inlet: 3/8”
Fluid outlet: ¼”
Ratio: 20 :1
Max working pressure: 7 bar
Fluid flow per cycle: 0,19 liter
Air inlet size: 3/8”
Fluid inlet: 3/8”
Fluid outlet: ¼”
EC-Declaration 195 278
FALCON (two air motors one lower SST)
Part No.
Description
241 594
241 595
10:1 Falcon Pump,
20:1 Falcon II Pump,
Manual
241 504
241 505
Falcon air motor (10:1)
Falcon air motor (20:1)
308 995
241 516
Falcon displacement (lower) pump, (repair kit 241 597)
308 996
15D 077
20:1 Falcon stand unit
7,5 m hose, Gun RACX,
Airless
308 994
288 124
232 810
232 812
10:1 Falcon Wall-mounted unit
Complete, gun with hard metal needle
Complete, gun with SST needle
Without hose set/gun
Air-assistend
Airless
308 994
288 127
232 815
232 817
Air-assistend
Airless
308 994
288 126
232 820
232 822
10:1 Falcon mobile 4-wheel cart
Air-assistend
Airless
308 994
288 129
232 823
233 938
Air-assistend
Airless
308 994
288 125
233 064
Air-assistend
Airless
308 994
288 128
233 939
Air-assistend
Airless
308 994
232 833
232 835
withouth hose set / without gun
with suction tube and strainer
Air-assistend
Airless
309 022
232 836
232 838
without hose set / without gun
with suction tube and strainer
Air-assistend
Airless
309 022
243 606
241 646
241 812
241 811
115 898
mobile 2-wheel cart
Falcon mobile 4-wheel cart
Fluidlhose 7,5 m, SST nippel
Air hose 7,5 m
Swievel ¼“ -18 NPSM (wetted parts SST- PTFE - CV-75)
SST
SST
308 996
Note:
These nozzle belongs to the standard equipment of the complete airles unit: PAA 515 and FFA 312
These nozzle belongs to the AA unite equipment:
10:1 Tip AAM 413,
20:1 Tip AAM 415
Hard metal
Needle ⇒
Ball and seat is Wolframcarbid
SST
Needle ⇒
Ball SST, seat is Acetal
13/02/09 11:38
1a - 9
308 994
308 994
MONARK
261 630
223 185
223 186
224 343
224 345
247 147
902 147
Check–Mate
222 782
222 839
239 327
223 844
223 596
237 958
224 350
218 956
Sanitary
965 520
954 383
222 770
952 793
207 550
903 035
13/02/09 11:38
1a - 10
Air Motor Monark
Manual 307 043
206 955 for stanchion Tube mounting
205 997 Series K
215 363 Series D
222 791 Series D for 3 tie rod mounting
206 728 Repair Kit Air Motor
Technical Data:
241 953 Muffler conversion Kit (new
Monark – Standard 92)
Max Working Pressure : 12 bar
Effective piston area
: 45cm²
Effective piston diameter : 76mm
Stroke
: 76mm
Weight
: 5,9Kg
Air inlet
: 3/8” NPT
Air volume per cycle
: 0,7 liter
215 352 Muffler
(not for inliner or sanitary)
MONARK
Part No.
223 186
description
2:1 Monark, short,
Accessories
Bare pump
223 185
2:1 Monark, 200 l,
(UHMWPE / leather)
224 345
5:1 Monark, short, SST
Bare pump (UHMWPE/Rubber)
224 343
Bare pump (UHMWPE/PTFE)
261 630
similar 224 343 but 1½“ inlet
247 147
Bare pump (PTFE)
902 147
Bare pump (PTFE) with riser
Rep Kit
223320
Application
Transfer
Manual
307 985
224402
Transfer, cleaning
308 117
307 985
308 116
224401
Transfer
308 116
308 116
308 116
5:1 Monark, 200 l, SST
224403
308 118
239 327
5:1 Monark, 200 l,
10:1 Monark, CM 450
15:1 Monark, short,
Bare pump (PTFE)
Bare pump (PTFE/leather)
208520
222774
235635
223 844
Bare pump (PTFE/leather)
307 044
Transfer, Extrusion 308 017
306 981
Airless coating
308 106
223 596
23:1 Monark, short,
Bare pump (leather +. 1x PTFE)
239328
307 619
237 958
222 782
222 839
Bare pump (leather +. 1x PTFE)
235636
307 619
23:1 Monark, CM200,
23:1 Monark, CM200, SST
Bare pump
Bare pump
222785
308 080
Transfer, Extrusion 308 200
224 350
218 956
222 770
MONARK SANITARY
Part No.
965 520
description
5:1 Monark, short, DB
954 383
5:1 Monark, short, DB
207 550
5:1 Monark, 200 L, DB
Accessories
Pump with muffler entry,
38 mm (1,5″) Tri Clamp - flange
Rep Kit
904 427
(PTFE)
218 741
(UHMWPE)
218741
Pump with muffler
903 035
5:1 Monark, 200 L, DB,
(Buna N / Neopren)
904427
(PTFE)
952 793
5:1 Monark, Short, CM,
948147
(Buna N / Neopren)
13/02/09 11:38
1a - 11
Application Manual
304 410
307 056
304 410
Transfer
307 056
307 056
304 410
307 056
304 410
307 056
MONARK
230 993
232 464
232 463
232 457
232 451
232 062
232 434
232 433
232 437
232 446
13/02/09 11:38
232 255
232 256
232 251
232 237
232 223
232 222
232 233
231 964
231 944
231 943
231 952
231 941
231 940
231 949
232 294
1a - 12
232 425
232 416
232 415
232 419
232 688
232 412
232 411
232 047
MONARK
Part No. Description
accessories
Application
Manual
230 993
231 964
Complete
Complete with hose and gun
Delivery/circulation
Air-assist. Airless
307 745
308 690
Complete
Complete
Without hose set or gun
Complete
Complete, with fluid regulator
Complete, with agitator and
fluid regulator
With fluid regulator
without hose set or gun
With fluid regulator,
hose and gun
Complete
Complete with PRO Xs4 AA
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
308 763
308 757
308 757
308 757
308 766
308 766
Air-assist. Airless
308 766
Air-assist. Airless
308 766
308 763
308 763
308 764
Complete
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
electrostatic
Air-assist. Airless
Complete with 200l suction kit
Air-assist. Airless
Air-assist. Airless
308 757
308 757
Complete, 7,5m hose set with
200l suction kit
Complete
Air-assist. Airless
electrostatic
Air-assist. Airless
308 758
Complete
Air-assist. Airless
308 766
Complete
Complete with heater, hose
set and gun
Complete
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
308 690
308 690
308 693
Air-assist. Airless
308 690
2:1 Monark, 200 L, Drum unit
15:1 Monark, G40 gun,
large 2 wheel cart, SST
232 425 15:1 Monark, G40 gun, smal 2 wheel cart
232 255 15:1 Monark, G40 gun, Wall-mounted unit
232 256 15:1 Monark, G40 gun, Wall-mounted unit
232 251 15:1 Monark, G40 gun, Wall-mounted unit, SST
232 463 15:1 Monark, G40 gun, pail mounted
232 467┼ 15:1 Monark, G40 gun, 19L (5 gal.),
pail mounted
232 464 15:1 Monark, G40 gun, pail mounted
232 457
232 416
232 415
232 419
15:1 Monark, G40 gun, 19L (5 gal.),
pail mounted, SST
23:1 Monark, G40 gun, small 2-wheel cart
23:1 Monark, G40 gun, small 2-wheel cart
23:1 Monark, PRO Xs4 AA, small 2-wheel cart
232 688
23:1 Monark, G40 gun,
small 2-wheel cart, SST
232 226┼ 23:1 Monark, G40 gun, Wall-mounted unit
232 237┼ 23:1 Monark, G40 gun, Wall-mounted unit,
SST
232 230┼ 23:1 Monark PRO Xs4 AA, Wall-mounted unit
232 439┼ 23:1 Monark G40 Gun, 19 L (5 gal),
pail mounted
232 451 23:1 Monark G40 Gun, 19 L (5 gal),
pail mounted, SST
231 944 23:1 Monark, G40 gun, large 2 wheel cart
231 943 23:1 Monark, G40 gun, large 2 wheel cart
232 062 23:1 Monark, G40 gun, 2-wheel cart, hot unit
231 952
23:1 Monark, G40 gun, 2-wheel cart, SST
232 412
232 411
231 941
231 940
231 949
232 047
232 223
232 222
232 233
232 294
232 434
232 433
232 437
232 446
23:1 Monark, small 2-wheel cart
23:1 Monark, small 2-wheel cart
23:1 Monark, large 2 wheel cart
23:1 Monark, large 2 wheel cart
23:1 Monark, large 2 wheel cart, SST
23:1 Monark, large 2 wheel cart, hot unit, SST
23:1 Monark, Wall-mounted unit
23:1 Monark, Wall-mounted unit
23:1 Monark, Wall-mounted unit, SST
23:1 Monark, Wall-mounted unit, hot unit
23:1 Monark, 19 L (5 gal) pail mounted
23:1 Monark, 19 l (5 gal), pail mounted
23:1 Monark, 19 l (5 gal), pail mounted
23:1 Monark, 19 l (5 gal), pail mounted, SST
Complete
Complete
Complete
Complete
Without hose or gun
Complete
Complete incl. agitator
Without hose or gun
┼ not shown
For futher equipment see relevant operating instructions !
13/02/09 11:38
1a - 13
Airless
Airless
Airless
Airless
Airless
Airless
Airless
Airless
Airless
Airless
Airless
Airless
Airless
Airless
308 763
308 766
308 762
308 762
308 635
308 635
308 635
308 692
308 756
308 756
308 756
308 759
308 765
308 765
308 765
308 765
MONARK
231 134
231 155
231 144
231 145
231 170
231 113
231 117
231 168
234 005
234 006
13/02/09 11:38
223 816*
234 121
234 007
234 008
1a - 14
MONARK CHECK-MATE EQUIPMENT
Part No.
Description
accessories
Application
Manual
231 113
231 144
231 145
223 816*
231 117
231 168
10:1 Monark, Check Mate 450
SST
SST
5 gal. RAM without hose or a gun
5 gal. mobile without hose or a gun
5 gal. mobile with 7,5 m hose and gun
200 liter RAM without hose or a gun
Extrusion
Extrusion
Extrusion
Extrusion
Extrusion
Extrusion
308 026
308 087
308 087
308 027
308 026
308 198
Extrusion
Extrusion
308 087
308 199
mobile with 7,5m hose and with gun
200 liter RAM without hose or a gun
Dto follower plate PTFE coated
Extrusion
Extrusion
Extrusion
308 087
308 027
308 027
231 134
231 170
231 135┼
234 121
247 155
* not CE market ┼ not shown
MONARK SANITARY EQUIPMENT
Part No.
Description
Manual
234 008
5:1 Monark Sanitary 2 ball Pump 200L, (207 550) , follower plate (15B 114)
with wiper ring (15B 098) for Ø 571 (22,5″) drum and RAM (234 015), SST
5:1 Monark Sanitary 2 ball Pump 200 L, (207 550) , follower plate (15B 111)
with wiper ring (15B 097) Ø 565 for Ø 546 (21,5″) drum and RAM (234 015), SST
5:1 Monark Sanitary CM-Pump (952 793), follower plate (15B 111)
with wiper ring (15B 097) Ø 565 for Ø 546 (21.5″) drum and RAM (234 015), SST
5:1 Monark Sanitary CM-Pump (952 793), follower plate (15B 114)
with wiper ring (15B 098) for Ø 571 (22,5″) drum and RAM (234 015), SST
309 505
234 007
234 005
234 006
13/02/09 11:38
1a - 15
309 505
309 505
309 505
PRESIDENT
High–Flo
237 142
237 144
218 747
218 795
223 183
223 184
6720060
237 145
237 146
247 146
224 346
224 342
220 560,
220 561,
220 562,
220 563,
220 564,
237 223,
239 855,
261 631
241 266
237 222
239 854
240 618
240 619
205 627
205 628
15D 788
224 348
239 326
Check–Mate
224 347
903 295
206 897
221 075
223 586
223 843
217 580
239 140
222 167
222 768
237 207
13/02/09 11:38
1a - 16
222 783
222 907
237 205
PRESIDENT
Part No.
Description
1,5:1 President, HF, SST
220 562
220 560
2:1 President, HF
220 563
2:1 President, HF, SST
220 561
3:1 President, HF
239 855
3:1 President, HF, short
237 223
3:1 President, HF, PTFE packing
220 564
241 266
Accessories
239 854
15D 788
240 618
240 619
237 142
237 144
218 747
Rep Kit Lower
308 793
Look at
Manual
308 793
Bare pump
308 793
Transfer
308 793
308 793
308 793
Page
47
308 793
308 793
308 793
3:1 President, HF, SST, ceramic
BSP thread and tri clamp Adapter
3:1 President, HF, SST ,BSP thread
308 793
308 793
3:1 President, short,
307 674
308 793
Bare pump
237198 leather
307 674
307 674
220927
leather / UHMWPE
3:1 President, short, SST,
lowerpump,
with side lifting tube fluid outlet
3:1 President, 200 l, SST,
218 795
Manual
308 793
3:1 President, HF, SST, short
3:1 President, 200 l,
237 146
Applikation
308 793
3:1 President, HF, SST, with
adjust-a-Stroke
3:1 President, HF, SST, PTFE
237 222
Air Motor 307 043
Rep Kit 206 728
237200
Transfer
307 674
PTFE
220927
307 674
leather / UHMWPE
237 145
223 184
6720 060
223 183
3:1 President, 200 l, SST, ump,
4:1 President, short
237200
PTFE
307 674
Bare pump,
223320 leather/UHMWPE
307 986
4:1 President, 200 l
Bare pump,
Bare pump,
PTFE
223320
6000 150
307 986
leather / UHMWPE
205 628
205 627
247 146
10:1 President, 40 L,
10:1 President, short, SST
Relax A Valve inl.
Relax A Valve inl.
Bare pump
224 346
Bare pump
224402
224 347
10:1 President, short, SST, with riser
Bare pump
Neopren
308 117
903 295
10:1 President, short, SST, with riser
Bare pump
224401
308 117
224 342
Bare pump
PTFE / UHMWPE
308 116
261 631
10:1 President, short, SST similar 224 342 but 1 ½“ inlett
224 348
10:1 President, 200 l, SST,
Bare pump,
224403
(separate construction bunghole drum)
footvalve
Ø 56,33 mm
PTFE / UHMWPE
239 326
Bare pump,
(separate construction bunghole drum)
footvalve
Ø 56,33 mm
208520
PTFE
222 167
10:1 President, 200 l, Mining
Bare pump,
Bare pump,
224902 PU
235634
Bare pump,
218559 PTFE
Bare pump,
Bare pump,
Bare pump,
217 580
287 886
237 207
222 768
246 933
237498
PU/Leather
247146 PTFE
Airspray
Airspray
Transfer
306 726
306 726
308 117
Hydra - clean
308 117
308 177
308 118
Transfer
308 738
Airless
307 962
306 936
Airless
306 936
222774
Extrusion
234422
Transfer
308 017
308 017
308 017
PTFE / leather
┼ 15:1 President, short
20:1 President, short, Check Mate 450
20:1 President, Check Mate 450
20:1 President, Check Mate 450,
UHMWPE / Tuffstack
206 897
28:1 President, short, SST (Pharma)
Bare pump,
PTFE
223 586
Bare pump,
235635
221 075
30:1 President, 200 l
Bare pump,
PTFE / leather
223 843
Bare pump,
239 140
237 205
222 783
222 907
46:1 President, short, SST, DB
Bare pump,
235636 leather
46:1 President, Check Mate 200, short
46:1 President, SST, Check Mate 200
Bare pump,
Bare pump,
Bare pump,
UHMWPE / leather
┼ not shown
13/02/09 11:38
1a - 17
printer`s ink
306 769
Airless
306 981
306 981
308 106
307 619
222785
Extrusion
308 080
308 080
308 200
PRESIDENT
225 886
225 841
954 088
232 200
232 201
232 211
232 263
230 992
6880 119
232 248
232 208
232 219
232 371
232 081
232 244
232 204
232 215
231 922
231 921
231 923
231 931
232 025
231 986
231 958
231 926
231 925
231 934
231 982
231 961
231 928
231 929
231 937
231 938
231 063
13/02/09 11:38
1a - 18
231 976
PRESIDENT
Part No.
232 081
Description
Wall-mounted unit
232 089┼ 3:1 President, HF, incl. 232 081
230 992
4:1 President, 200 l drum unit
225 841 10:1 President, 20/40l,
mobile A/S device
225 886 10:1 President, 200 l
954 088
10:1 President, Tex Spray, 200 L, Unit,
SST, rubberpacking
6880 119 10:1 President, Hydra Clean Unit
231 958 15:1 President, G40 gun, mobile
231 961 15:1 President PRO Xs4 AA Smart,
mobile
232 244 15:1 President, G40 gun,
Wall-mounted unit
232 248 15:1 President, PRO Xs4 AA Smart,
Wall-mounted unit
231 926 30:1 President, G40 gun mobile
231 925 30:1 President, G40 gun mobile
231 982 30:1 President, G40 gun mobile, hot
231 934 30:1 President, G40 gun mobile, SST
231 928 30:1 President, Pro Xs4 AA Smart,
mobile
mobile
mobile, hot
mobile, SST
mobile, SST
232 204 30:1 President, G40 gun, Wall-mounted
unit
232 215 30:1 President, G40 gun,
Wall-mounted unit, SST
232 363┼ 30:1 President, G40 gun,
Wall-mounted unit, SST, hot
Wall-mounted unit
Wall-mounted unit, SST
232 371 30:1 President PRO Xs4 AA Smart,
Wall-mounted unit, SST, hot
232 286┼ 30:1 President, PRO Xs4 AA,
Wall-mounted unit, hot
231 922 30:1 President, mobile
231 976 30:1 President, mobile, hot,
231 931 30:1 President, mobile, SST
232 200 30:1 President, Wall-mounted unit
232 211 30:1 President, Wall-mounted unit, SST
232 212┼ 30:1 President, Wall-mounted unit, SST
232 270┼ 30:1 President, Wall-mounted unit, hot,
232 358┼ 30:1 President, Wall-mounted unit,
hot, SST
231 063 30:1 President, elevator 200 l
232 025┼ 46:1 President, mobile
Accessories
¾″ strainer, return throttle,
200l suction kit
Elevator, agitator (239 857) 200l
Complete
Complete, evenflo, 5m hose set
Complete, evenflo,
drum brackets, 7,5m hose set
With drum brackets, evenflo without
hose set or a gun
Complete, 12.2m 3/8″ hose
Complete
Complete
Transfer/circulate 308 768
Air Spray
306 472
Air Spray
306 402
Air Spray
309 489
Cleaning
6000 159
Air-assist. Airless 308 690
E Static coating
308 691
Complete with
200l suction kit
Complete 7,5m hose,
200l suction kit
Without hose set or a gun
Complete
Complete
Complete, 7,5m hose set
Complete
E Static coating
308 758
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
Air-assist. Airless
E-Static coating
308 690
308 690
308 693
308 690
308 691
Complete with 15m hose set
E-Static coating
308 691
Complete
E-Static coating
308 694
Complete
E-Static coating
308 691
Complete with 15m hose set
E-Static coating
308 691
Complete with 200 L suction kit
7,5m hose set, 200l suction kit
Complete 7,5m hose,
200l suction kit
Complete with 7,5m hose,
200l suction kit
7,5m hose, 200l suction kit,
E-Static coating
308 758
E-Static coating
308 758
E-Static coating
308 761
Complete, 200l suction kit
E-Statik coating
308 761
Without hose or a gun
Complete with 7,5m fluid hose
Complete with 15m fluid hose
Complete
Complete with 7,5 fluid hose
Without hose or a gun,
with 200l suction kit
Without hose or a gun,
with 200l suction kit
Complete with 200l suction kit,
heater bracket 192585 order
separately
Airless
Airless
Airless
Airless
Airless
Airless
Airless
308 635
308 635
308 635
308 692
308 635
308 756
308 756
Airless
Airless
308 756
308 756
Airless
308 759
Airless
308 759
Elevator, drum cover, agitator,
strainer, 7,5 m hose, gun
Complete
Complete
Airless coating
306 706
Airless
Airless
308 635
308 758
incl. heater bracket
┼ not shown
13/02/09 11:38
Applikation
Manual
1a - 19
PRESIDENT
231 136
231 137
231 172
231 173
232 105
231 146
231 147
234 370
231 111
231 118
231 169
Check-Mate
234 120
223 817
234 369
184 147
222 792
223 689
233 030
13/02/09 11:38
233 028
1a - 20
PRESIDENT
Part No.
231 111
233 028
Description
20:1 President 19 l, Check Mate 450
231 147
231 146
234 370
UHMWPE/Tuffstack
20:1 President, SH, Check Mate 450
20:1 President, SH, Check Mate 450
UHMWPE/Tuffstack
223 817
253 018
234 369
231 118
233 030
231 169
232 105
231 136
46:1 President 19 l, SST,
Check Mate 200
231 137
231 172
Check Mate 200
Check Mate 200,
231 173
234 120
247156┼
Check-Mate
Accessories
Complete, 5gal. Ram without hose or a gun
Single pillar 5gal. Ram without follower plate
or a hose set
Cart mounted elevator unit 5gal. with 7,5m
hose und gun
Cart mounted elevator unit, 5gal. without
hose or a gun
Cart mounted elevator unit, 5gal. without
hose or a gun
200l Ram without hose or a gun
dto follower plate PTFE coated
200l Ram without hose or a gun,
Neopren wiper ring
5gal. Ram, without hose or a gun
Single pillar 5gal. Ram without follower plate
or a hose set
5gal. Ram, without hose or a gun
Applikation Manual
Extrusion
308 026
Extrusion
308 026
Extrusion
308 087
Extrusion
308 087
Printer`s ink
Transfer
Extrusion
Extrusion
Printer`s ink
Transfer
Extrusion
Extrusion
308 087
Extrusion
308 198
5gal. Ram, with 2 whell cart
Cart mounted elevator unit 5gal.
without hose set or a gun
Cart mounted elevator unit 5gal.
with 7,5m hose und gun
Mobile, without hose or a gun
Extrusion
Extrusion
308 884
308 087
Extrusion
308 087
Extrusion
308 199
Cart mounted unit 5gal.
with 7,5m hose and gun
200l Ram without hose and gun
dto follower plate PTFE coatad
Extrusion
308 199
Extrusion
Extrusion
308 027
308 027
┼ not shown
Accessories
184 147
223 689
222 792
Protective plate 0,25 mm thick
Set of protective plate (10 St.)
Polythylene for 5 gal; follower plate
For 200l follower plate
Note:
only for lower CM 450
to use materials with a viscosity more than 1 million Cps
remove the spacer pos. 33 (184 124) from the lower.
piston rod
Pos. 1
spacer
Pos. 33
guide
Pos. 14
13/02/09 11:38
1a - 21
308 027
308 027
308 027
308 026
308 026
MERKUR PUMPS & PACKAGES
015.050
020.035
030.020
030.050
040.035
060.020
Filter
117 290
Spring
117 289
117 291 gasket (cup)
Wall Mount unit
116 902 plug G⅜
117 297 gasket (plug)
--245 717
117 237
5 liter tank
Muffler
inlet with
two ball valve
245 722 Air control-AA System, ¼ “
-screw
245 723 Air control – Airless, ¼”
117 320
233 887
117 324
234 729 Air control – Airless, 45º bend
reglulator with T-handhold
117 351
Wall mounted
245 682 Air inlet adapter, ⅜“ BSP(A)
245 718 Air inlet adapter, ¼“ NPT(A)
233 888
117 323
117 008
15F 150
connect 90° M26 x 1,5 D22
Fitting Ø 22 incl. cutting ring gasket (replacement)
O-Ring Viton I.D. Ø16 x 2B (replacement)
O-Ring Viton, PTFE coated (MEK resistant)
287 258
245 724
287 259
245 737
016 684
suctionhose(Nylon) tube, 30l with 1,8mm strainer
suctionhose (Synth. Rubber) tube, 30l with 1,8mm strainer
suctionhose (Nylon) tube, 200l with 1,8mm strainer
suctionhose((Synth. Rubber) tube, 200l with 1,8mm strainer
hose (Synth. Rubber) electr. conductive (40m roll)
77848 035009
77848 035010
233 952
233 946
13/02/09 11:38
1a - 22
suctionhose, ID 19mm, 1000mm length/D22, SST
suctionhose, ID 19mm, 1600mm length/D22, SST
117 439
117 309
Strainer* 1,0mm, ID 22mm
Strainer* 1,8mm, ID 22mm
*includet clamp
Sieve 1,0mm mesh size
Sieve 1,8mm mesh size
15B 493
15B 521
sealer ring, SST, 17,0 x 21,8mm
Fitting , SST, G 3/8 (A) x 3/8″ NPT (A)
245 681
106 553
connect M26 x 1,5 x ¾″ NPT (A)
O-Ring (replacement)
MERKUR – PUMPS & PACKAGES wetted parts SST
Part No.
233 752
233 753
233 754
233 755
233 756
Description
Accessory
Pump/Unit
BSP thread Pump, with silencer
with NPT thread
015.050 ratio 15:1, per stroke 50 cm³ bzw. per double stroke 100 cm³
233 818
233 819
233 820
233 821
233 822
233 891
233 892
233 893
233 894
233 895
015.050
020.035
030.020
030.050
040.035
Air Motor
Manual
245 354
245 354
245 354
245 355
245 355
309 462
300 606
245 354
245 354
245 354
245 355
245 355
309 463
300 606
Wall-mounted basic version, with safety valve, silencer, bracket
Wall-mounted and air inlett fitting
233 896
233 897
233 898
233 899
233 900
Wall-mounted, for 30 liter containers, with additional suction hose with strainer, pressure control
Application
valve (air inlet 3/8), sievel suction adapter
233 901
233 902
233 903
233 904
233 905
233 906
233 907
233 908
233 909
233 910
015.050
020.035
030.020
030.050
040.035
015.050
020.035
030.020
030.050
040.035
Without fluid filter, hose or a gun
With fluid filter, 7,5 m 3/16″ hose set, G15 AA gun 249 233, AAM/GG4 xxx
With fluid filter, 7,5 m ¼″ hose set, G40, 249 242, AA gun, AAM/GG4
Airless
309 463
Air assistent
309 463
Airless
Cart mounted with 5 Liter cup, with silencer, safety valve, suction hose with strainer,
pressure control valve (air inlet 3/8), sievel suction adapter, holding device for suction
233 911
233 912
233 913
233 914
233 915
233 916
233 917
233 918
233 919
233 920
015.050
020.035
030.020
030.050
040.035
015.050
020.035
030.020
030.050
040.035
With fluid filter, 7,5 m 3/16″ hose set, G15 AA gun 249 233, AAM/GG4 xxx
With fluid filter, 7,5 m ¼″ hose set, G40, 249 242, AA gun, AAM 413
Airless
309 463
Air assistent
309 463
Airless
Cart mounted with 5 Liter cup, with silencer, safety valve, suction hose with strainer,
pressure control valve (air inlet 3/8), sievel suction adapter
233 921
233 922
233 923
233 924
233 925
234 725
234 726
234 727
234 728
233 926
233 927
233 928
233 929
233 930
245 354
245 355
245 351
245 352
245 353
015:050
020:035
030:020
030:050
040:035
030:050 Air regulator with T handhold
040:035 Air regulator with T handhold
030:050 With fluid filter, 7,5 m ¼″ hose, Silver Gun, GHD 413
040:035 With fluid filter, 7,5 m ¼″ hose, Silver Gun, GHD 413
015:050 With fluid filter, 7,5 m ¼″ hose set, G15 AA Pist. 249 233, AAM/GG4 xxx
020:035 With fluid filter, 7,5 m ¼″ hose set, G40, 249 242 Gun, AAM 413
Adaptors: note that all pump connections are metric or BSPP.
NPT fitted accessories require adaptors which will soon be available
Air-motor, complete, D110 S70, Rep. Air valve 233 836, gasket 233837, Rod Kit 233838
Air-motor, complete, D160 S70, Rep. Air valve 233 836, gasket 233842, Rod Kit 233838
Lower, complete, 000.020, Packingen UHMWPE/PTFE, set 233 826
245 717
117 320
233 887
117 324
5 liter cup 304 SST, Ø 22 tube fitting, Filter inset 117 290, spring bending 117 289
Tube fitting Ø 22 x G¾″ (A)
Adapter ¾″(I) x M26 x 1.5 (A) x G¾″(I)
Gasket A27 x 32, 74188 025 070 gasket A27 x 32 aluminium
13/02/09 11:38
1a - 23
Airless
309 463
Air
assistent
Airless
309 463
309 462
309 462
SENATOR
220 565
220 568
237 282
948 292
570 019
13/02/09 11:38
244 660
237 517
237 280
237 264
246 941
231 166
949 080
686 615
245 169
245 166
234 122
224 661
949 704
948 649
1a - 24
234 009
234 010
234 011
234 012
SENATOR
Air Motor: 306 982
Rep Kit: 207 385
Part No.
220 565
Description
3,5:1 Senator HF
220 568
3,5:1 Senator HF
245 169
13:1 Senator, Xtreme 1200,
(290cc)
13:1 Senator, Dura Flo 1200,
(290cc) SST
17:1 Senator, Xtreme 900,
(220cc)
17:1 Senator, Duro Flo 900,
(220cc), SST
25:1 Senator, Dura Flo 600,
(145cc), SST
Accessories
Bare pump (UHMWPE)
Low Noise Air-motor
Bare pump (UHMWPE)
Low Noise Air-motor
Bare pump
Standard Air-motor
Bare pump (Leather,1 X PTFE)
Standard Air-motor
Bare pump
Standard Air-motor
Bare pump (Leather,1 X PTFE)
Standard Air-motor
Bare pump (Leather, 1 x PTFE)
Standard Air-motor, lower with flange
237 282
17:1 Senator, Xtreme 900, (220cc)
Wall-mounted unit
Air regulator, HD Filter CS, 200l suction kit Airless
coating
307 933
237 264
19:1 Senator, Check Mate 800
Transfer,
Extrusion
Printer`s ink
308 351
246 941┼
224 660
Standard Air-motor
Bare pump U Packing (throat) PTFE
Standard Air-motor
Low Noise Air-motor
Transfer,
Extrusion
308 017
234 377 CE
Standard Air-motor
34:1 Senator, Check Mate 450,
Low Noise Air-motor
Low Noise Air-motor
Standard Air-motor
200l, 3″ two pillar RAM, air control set,
Printer`s ink
308 027
5 gal. single pillar RAM, air control set,
follower plate with Buna N, wiper lip
200 L, 3″ two pillar RAM, air control set,
follower plate
200 L, 6,5“two pillar RAM, air control set,
Followplate, EPDM Wischring
Transfer
Extrusion
Delivery,
Extrusion
Transfer
Extrusion
308 026
237 517
245 166
237 280
686 615
231 166 CE
224 661 CE
234 122 CE
Applikation
Transfer
Manual
308 793
Transfer
308 793
Transfer
309 340
Transfer
308 353
Transfer
309 340
Transfer
308 354
Transfer
308 350
308 351
308 027
310 524
┼ not shown
SENATOR SANITARY
Part No.
948 292
949 080
949 704
948 649
570 019
234 012
234 011
234 009
234 010
Description
4:1 Senator FT 14, 200 L,
FDA Buna N, (2 Ball, UHMWPE)
4:1 Senator FT 14, short,
Viton, (2 Ball PTFE)
Viton (2 Ball UHMWPE)
FDA Buna N, (2 Ball UHMWPE)
4,3:1 Senator FT 14, CM-Pump,
UHMWPE, PTFE, FDA, Buna N
Accessories
Pump with exthaust hose and muffler
Applikation Manual
Transfer
308 076
Pump with 90° inlet bend, 2½ tri clamp,
flange, exthaust hose and muffler,
Pump with inlet-flange 2 ½ tri clamp,
exthaust hose and muffler
Pump for RAM montage, exthaust hose and
muffler
Pump with exthaust hose and muffler
Transfer
308 076
Transfer
308 076
Transfer
308 076
Transfer
308 076
4:1 Senator FT 14, 200 L RAM,
2 Ball Pump short (948 649)
2 Ball Pump short (948 649)
CM-Pump (570 019)
CM-Pump (570 019)
Follower plate (15B 114) wiper rings for
Ø 571 drum and RAM (234 015)
Ø 546 drum and RAM (234 015)
Ø 546 drum und RAM (234 015)
Ø 571 drum and RAM (234 015)
Delivery
309 505
Transfer
309 505
Transfer
309 505
Transfer
309 505
Check Mate
Dura Flo
= priming piston pump
= ball type pump (SST)
13/02/09 11:38
HF
SH
1a - 25
= ″4″ ball type pump
= priming piston pump
BULLDOG
243 737
248 335
248 336
244 849
220 577
220 578
240 625
240 626
222 826
222 827
221 104
207 321
245 190
245 191
218 096
245 117
245 118
222 829
246 935
222 903
222 813
13/02/09 11:38
244 464
246 146
246 147
244 457
244 465
205 148
237 613
236 464
1a - 26
237 274
949 444
BULLDOG
Air Motor: 307 049
Rep Kit Motor: 206 734
Part No.
Description
3:1 Bulldog HF, 2″ NPT(f)
243 737
3:1 Bulldog HF, SST, 2″ NPT(f), Cr
248 335
3:1 Bulldog HF, SST, 2″ BSP(f), Cr
248 336
HF pump 2″ repair and refitting set
220 577
4:1 Bulldog HF
220 578
4:1 Bulldog HF SST
240 625
4:1 Bulldog HF SST
Air outlet 1″ NPT(f)
240 626
4:1 Bulldog HF SST
Air outlet 1″ NPT(f)
206 418┼
5:1 Bulldog, Short, SST,
206 796┼
Buna/UHMWPE
221 104
5:1 Bulldog, Short, SST, PTFE
5:1 Bulldog, 200 l
207 321
206 797┼
222 826
222 827
245 116┼
237 516┼
245 167┼
237 287┼
245 117
244 457
244 464
245 165┼
237 367┼
237 613
245 118
244 465
237 634┼
236 464
218 334┼
218 096
205 148
222 829
246 935
222 903
237 261┼
234 978┼
246 940┼
241 901┼
237 274┼
237 779
222 813
222 778
Accessories
Rep Kit Lower
Bare pump, LN Air-Motor
Bare pump, LN Air-Motor
243 727
Bare pump, LN Remote Air-Motor (233 077)
309 130
HF Pump 2″ piston refitting set
Bare pump, LN-Motor
Bare pump, LN-Motor
Bare pump, LN-Motor with Tri Clamp Adapter
220 587
Bare pump, LN-Motor without Tri Clamp
Manual
309 136
309 177
308 793
308 793
308 793
Adapter, inlet 1 ½″ BSP(f), outlet 1 ¼″ BSP(f)
Bare pump, ST-Air Motor
206 931
306 818
207 349
306 818
307 871
306 818
5:1 Bulldog, 200 L, SST,
Buna/UHMWPE
10:1 Bulldog, Short, SST, PTFE
10:1 Bulldog, Dura Flo 2400
10:1 Bulldog, Dura Flo 2400, SST
24:1 Bulldog, Xtreme 1045, 250cc
33:1 Bulldog, Xtreme 750, Steigrohr
43:1 Bulldog
60:1 Bulldog, Short
Bare pump, ST- Air Motor
Bare pump, ST-Motor, Lower 206792
Bare pump, ST-Motor, Lower 222 801
Bare pump, ST-Motor, Lower 244412
Pump, INT. ST-Motor, Lower 244 413
Bare pump, LND-Motor, Lower 244 413
Pump, INT. ST-Motor, Lower 244 411
Bare pump
Bare pump,
Lower 217 403
3:1 Bulldog, SH
12:1 Bulldog, CM 2100
12:1 Bulldog, CM 2100, SST.
31:1 Bulldog, CM 800, SST
31:1 Bulldog, CM 800, 200 l
55:1 Bulldog, CM 450, Short,
with large wet cup
55:1 Bulldog, Check Mate 450
Bare pump
Bare pump, LN-Motor, Lower 222 810
with ¾″NPT(f) outlet
206 931
207 581
222 879
222 875
244 853
237 178
244 852
237 172
244 851
244 851
244 851
244 851
237 240
237 240
244 850
255 850
237 234
237 234
218 040
306 821
308 151
308 152
309 340
308 360
309 340
308 354
309 340
309 340
309 340
309 340
308 418
308 418
309 340
309 340
308 350
308 350
307 714
6000 102
222 860
234 419
222 860
222 864
222 866
241 782
222 864
222 864
222 773
306 642
308 149
308 149
308 150
308 351
308 352
308 351
308 351
308 351
308 017
222 773
222 773
308 017
308 017
┼ not shown
BULLDOG SANITARY
949 444
954 180┼
10:1 Bulldog, SH, Sanitary, SST,
PTFE/UHMWPE
10:1 Bulldog, SH, Sanitary, SST,
PTFE/UHMWPE
LND-Motor = Low Noise De Ice Air Motor (237 001)
245 190
245 191
244 849
246 146
246 147
13/02/09 11:38
Pump with electronickel motor and
muffler
Pump with Adjust-A-Stroke motor
LN-Motor = Low Noise Air Motor (215 255)
Inlet load spring kit for Xtreme 145cm³ + 180cm³
Inlet load spring kit for Xtreme 220cm³ + 250cm³ +, 290cm³
Connection rod set Xtreme (Standard, short)
large wet cup for Xtreme Pump 145 cm³ + 180 cm³
large wet cup for Xtreme Pump 220 cm³, 250 cm³ + 280 cm³
1a - 27
306 916/
307 049
306 916
ST-Motor = Standard Air Motor (208 356)
BULLDOG
226 314
6880 116
253 697
245 187
244 459
244 458
244 461
244 466
244 468
245 113
244 463
244 462
244 469
13/02/09 11:38
237 615
1a - 28
BULLDOG
Part No.
226 314
245 113
244 463
244 458
244 461
244 459
253 697
245 187
6880 116
245 185┼
237 615
244 462
244 466
244 468
244 469
Description
10:1 Bulldog, Hydra Clean
Cart-mounted unit
24:1 Bulldog, Xtreme, 1045
special for zinc materials
(UHMWPE/Leather)
33:1 Bulldog, Xtreme 750,
special for zinc materials
(UHMWPE/Leather)
33:1 Bulldog, Xtreme 750
Cart mounted unit
Cart-mounted unit
Cart-mounted unit, Quiet air motor
Wall-mounted unit,
Wall-mounted unit, st. air motor
Wall-mounted unit, Quiet air motor
Wall-mounted unit, hot sprayer
33:1 Bulldog, Xtreme 750, 200 L
Elevator, standard air motor
33:1 Bulldog, Xtreme 750, G40 Gun,
Cart-mounted unit
Unit Cart-mounted unit
Cart-mounted unit
41:1 Bulldog, Xtreme 600, G40 Gun,
Cart-mounted unit
Accessories
2 wheel cart, air filter/regulator, 12 m, ⅜″
hose, gun and suction kit
Lower 206 792
2 wheel cart, air filter/regulator, circulation set,
15 m ⅜“ Hose, 1.8 m ¼“ whip end, swivel,
gun XHD RAC with nozzle
Lower 244 416
2 wheel cart, air filter/regulator, circulation set,
15 m ⅜“ Hose, 1.8 m ¼“ whip end, swivel,
gun XHD RAC with nozzle
Lower 244 412
2 wheel cart, air filter/regulator,
suction kit, int. Filter
Lower 244 413
2 wheel cart, air filter/regulator, 15 m ⅜“
Hose, 1.8 m ¼“ whip end, swivel,
gun XHD RAC
Lower 244 413
2 wheel cart, air filter/regulator,
suction kit, int. Filter
Lower 244 413
Air filter/regulator, HD Filter CS,
200L Suction kit
Lower 244 414
Air filter/regulator, HD Filter CS,
200L Suction kit
Lower 244 412
Air filter/regulator, INT. Filter CS,
without Suction kit
Lower 244 413
Heater 245 863, 240 Volt,
Standard Air Motor
Lower 244 412
Elevator, drum cover, air control set
2 wheel cart, air filter/regulator, Suction kit,
INT. Filter 15m hose set, G40 HIFLO gun,
Rac with nozzle
Lower 244 413
INT. Filter
Lower 244 411
2 wheel cart, air filter/regulator, 15 m ⅜“
Hose, 1.8 m ¼“ whip end, swivel,
gun XHD RAC
Lower 244 411
INT. Filter 15m hose set, G40 HIFLO gun,
RAC with nozzle
Lower 244 411
┼ not shown
CS
SST
Check Mate
INT.
13/02/09 11:38
= Normal steel
= Stainless steel
= Check Mate
= Integrate filter
1a - 29
Applikation
Cleaning
Manual
306 926
Airless
coating
309 362
309 342
325 022
309 362
309 342
325 022
309 342
309 329
309 342
309 329
Airless
coating
Airless
coating
Airless
coating
Airless
coating
Airless
coating
Airless
coating
Airless
coating
Airless
coating
Airless
coating
Air-assist.
Airless
309 342
309 329
307 932
307 932
6000 156
3Y7 932
307 932
308 478
309 342
309 363
Airless
coating
Airless
coating
309 342
309 329
309 342
309 329
Airassist.
Airless
309 342
309 363
BULLDOG
918 371
918 386
241 083*
231 167
237 263
233 029
224 662
918 552
234 374
686 892*
234 371
C57 939
205 028
244 641
13/02/09 11:38
1a - 30
234 013
234 014
234 016
BULLDOG
Part No.
686 892*
234 371
237 263
918 371
918 552
234 374
234 979┼
234 980┼
231 167
233 029
918 386
241 083*
970 249┼
224 662
253 016┼
223 819┼
C57 939
Description
Quiet Air Motor
Standard Air Motor
Standard Air Motor
Standard Air Motor
Standard Air Motor
Standard Luftmotor
lower SST
Standard Air Motor
41:1 Bulldog, Dura Flo 600
Lower SST
Standard Air Motor
Quiet Air Motor
Standard Air Motor
Quiet Air Motor
Quiet Air Motor
55:1 Bulldog, Check Mate 450,
Quiet Air Motor
Quiet Air Motor
Quiet Air Motor
Standard Air Motor
Standard Air Motor
Accessories
200L 3″ 2 pillar ram, air filter/regulator,
follower plate, EPDM wipe lip, drum clamp
200L 3″ 2 pillar ram, air filter/regulator,
follower plate, Neopren (white), drum clamp
5Gal. single pillar ram, air filter/regulator, follower
plate
plate with gasket, PVC hose
200L 3″ 2 pillar ram, air filter/regulator, follower
plate, PVC wipe lip, drum clamp
200L 3″ , 2 pillar ram, 2 pillar ram, follower plate,
Neopren (white), drum clamp
200L 3″ , 2 pillar ram, 2 pillar ram, follower plate,
EPDM wipe lip, drum clamp
Applikation
Extrusion
Manual
308 027
Printer`s ink
Transfer
Extrusion
308 027
Extrusion
310 526
Extrusion
308 027
Printer`s ink
Transfer
Extrusion
308 027
200L 3″ , 2 pillar ram, air filter/regulator, follower
plate PTFE coated, EPDM wipe lip,
drum clamp
plate
5Gal. single pillar ram,
without follower plate, without hose set
5Gal. 3“ 2 pillar ram, air filter/regulator, follower
plate with Buna N wipe lip
30Liter, 3″ 2 pillar ram, stroke distance505 mm
follower plate with NBR wipe lip Ø330
Included: 241 083 with 3m HD-Hose
and valve 1 ¼″NPT(I)
200L, 3″ 2 pillar ram, air filter/regulator, follower
plate, EPDM wipe lip, drum clamp
dto, follower plate, PTFE coated
Transfer
Extrusion
308 027
Extrusion
308 026
Extrusion
308 026
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
308 027
Extrusion
308 027
Extrusion
308 027
Extrusion
309 076
200L, 3″ 2 pillar ram, air filter/regulator, follower
plate, EPDM wipe lip, drum clamp
200L, 3″ 2 pillar ram, short rods
5Gal. follower plate with Buna N wipe lip
308 471
308 027
Accessory
184 147
223 689
222 792
Protective plate 0,25 mm thick
For 200l follower plate
┼ not shown
* not CE marked
Note:
only for lower CM 450 to use materials with a viscosity more than 1 million Cps
remove the spacer pos. 33 (184 124) from the lower (see page 1-21).
205 028
3:1 Bulldog, SH, Sinker
244 641
3:1 Bulldog, SH
Accessories
Follower plate, 200L
200L 3″ 2 pillar ram, 2“ air filter/regulator,
1,8m material hose with 2“ valve,
1,8m ¾“ air hose, drum clamp
Applikation
Transfer
Transfer
Manual
306 642
309 345
Applikation
Transfer
Manual
309 505
Transfer
309 505
Transfer
309 505
BULLDOG SANITARY
234 013 10:1 Bulldog, 200L Ram
CM - Pump (949 444)
234 014 10:1 Bulldog, 200L Ram
CM - Pump (949 444)
234 016 10:1 Bulldog, 200L Ram
CM - Pump (954 180)
With Adjust A Stroke
13/02/09 11:38
Accessories
Follower plate set (15B 111) with wipe (15B097)
for Ø 546 mm drum and Ram(234 015)
for Ø 572 mm drum and Ram (234 015)
for Ø 572 mm drum and Ram (234 015)
1a - 31
KING
248 341,
248 342,
243 739,
248 339,
241 518
248 340
243 738
248 337
248 338
237 286
222 833
222 898
222 891
222 895
237 635
236 460
244 849
234 907
245 178
245 179
220 648
245 119
245 120
245 121
245 122
222 901
246 936
222 905
13/02/09 11:38
244 470
244 476
244 485
244 494
237 707
237 708
240 945
241 519
1a - 32
244 477
244 486
244 495
237 265
245 190
245 191
246 146
246 147
253 376
232 832
KING
Air Motor: 309 348
Rep. Kit Motor: 207 730
Part No.
248 341
248 342
243 739
248 339
248 340
243 738
248 337
248 338
Description
Accessories
3:1 King HF, SST, 4 Liter, Cr
Bare pump 2″ NPT(f)
Bare pump 2″ BSP(f)
3:1 King HF, SST, Cr
4:1 King HF, 3 Liter
Bare pump 2″ BSP(f)
6:1 King HF, 2 Liter
Bare pump Bare pump
2″ NPT(f) Bare pump
2″ BSP(f)
HF pump repair and conversion kit
HF pump piston repair and conversion kit
Used in
XtremeMix
241 518
222 833
248 828┼
222 898
222 891
222 895
245 119
244 470
245 138┼
245 120
234 907
244 477
244 476
237 286
245 173┼
245 121
245 178
244 485
244 486
237 635
236 460
245 122
245 179
244 494
244 495
220 648
222 901
246 936
222 905
237 707
237 708
236 471┼
246 942┼
237 265
240 945
236 462┼
241 519
253 376
232 832
Lower
10:1 King
20:1 King, Dura Flo 2400, 579 cm³
20:1 King, Dura Flo 2400, 579 cm³
20:1 King, Dura Flo 2400, SST
28:1 King, Dura Flo 1800, 434 cm³
45:1 King, Xtreme 1045, 250cm³
45:1 King, Xtreme 1045, 250cm³, int
80:1 King Xtreme 600, 145cm³
80:1 King Xtreme 600, 145cm³
80:1 King Xtreme 600, 145cm³, int
80:1 King Xtreme 600, 145cm³, int
20:1 King, CM SST
24:1 King, CM 2100, 504 cm³
24:1 King, CM 2100, 504 cm³
24:1 King, CM 2100, SST
50:1 King, CM 1000, 241 cc
50:1 King, CM 1000, SST
65:1 King, CM 800, 193cm³
65:1 King, CM 800
65:1 King, CM 800
65:1 King, CM 800
65:1 King, CM 800, SST
65:1 King, CM 800, SST
65:1 King, CM 800, 5Gal.
65:1 King, CM 800, 200L
LND-Motor = Low Noise De Ice Air Motor (245112)
249 282
249 274
249 278
249 283
249 279
249 275
249 284
249 276
249 280
249 285
249 277
249 281
248 331
248 331
248 332
248 330
248 330
243 731
248 329
248 329
Air
Motor
220 106
235 525
220 106
220 106
235 525
220 106
220 106
235 525
Lower
Manual
with tuff coat
243 749
243 750
309 136
243 747
243 748
309 136
243 745
243 746
309 136
309 130
309 175, 309 176 309 177
Lower
Rep Kit Lower
222 801
222 801
222 803
222 796
222 805
244 416
244 417
244 417
244 414
244 414
244 415
244 415
236 470
236 470
244 412
244 412
244 413
244 413
236 456
236 456
244 410
244 410
244 411
244 411
207 242
222 810
246 934
222 811
222 954
236 613
236 611
246 939
236 611
236 611
236 612
236 612
237 885
237 795
222 879
222 879
222 875
222 849
222 845
244 853
244 853
244 853
244 852
244 852
244 852
244 852
237 172
237 172
244 851
244 851
244 851
244 851
237 240
237 240
244 850
244 850
244 850
244 850
220 862
222 860
222 860
222 860
222 869
222 871
LN-Moto = Low Noise Air Motor (220 106)
222 866
222 866
Air Motor
LN-Motor
LN-Motor
LND-Motor
LN-Motor
LN-Motor
LN-Motor
ST-Motor
ST-Motor
LND-Motor
ST-Motor
LND-Motor
LND-Motor
ST-Motor
LND-Motor
LN-Motor
ST-Motor
LND-Motor
ST-Motor
LND-Motor
ST-Motor
LND-Motor
ST-Motor
LND-Motor
ST-Motor
LND-Motor
ST-Motor
LN-Motor
ST-Motor
LN-Motor
ST-Motor
ST-Motor
ST-Motor
ST-Motor
LND-Motor
LN-Motor
ST-Motor
LN-Motor
LN-Motor
LND-Motor
307 871
308 151
308 152
308 147
308 148
309 340
309 340
309 340
309 340
309 340
309 340
309 340
308 354
308 354
309 340
309 340
309 340
309 340
308 418
308 418
309 340
306 916
308 149
308 149
308 150
308 355
308 356
308 351
308 351
308 351
308 351
308 352
308 352
308 570
308 570
ST-Motor = Standard Air Motor (245 111)
┼ not shown
245 190
245 191
244 849
184 470
15B 316
246 146
246 147
HF
CM
Dura Flo
Inlet load spring kit
for Xtreme 145cm³ + 180cm³ Inlet load spring kit
for Xtreme 220cm³ + 250cm³ + 290cm³
Connection rod set Xtreme (Standard, short)
Outlet nipple ¾″ NPT(M) x M42 x 2,0 CS (if needed to change the 1½″ NPT(M) nipple (not Xtreme)
Outlet nipple ¾″ NPT(M) x M42 x 2,0 SST 304 (if needed to change the 1½″ NPT(M) nipple (not Xtreme)
Oil cup adapter set for Xtreme pump 145 cm³ und 180 cm³
Oil cup adapter set for Xtreme pump 220 cm³, 250 cm³ und 280 cm³
= 4 ball type (HighFlo)
= Check Mate
= ″2″ ball type
13/02/09 11:38
Int
1a - 33
= Integrierter Filter
KING
6880 242
244 474
244 482
244 491
244 500
244 471
244 478
244 487
244 496
248 838
248 839
248 840
231 175
231 174
244 479
244 488
244 497
13/02/09 11:38
231 131
1a - 34
KING
Part No.
231 175
Description
20:1 King Dura Flo 2400,
Cart mounted unit
28:1 King Dura Flo 1800
231 174
231 131
6880 242
248 838
Cart mounted Zink
28:1 King, Hydra Clean
Cart mounted Unit
45:1 King, Xtreme 1045
Cart mounted Unit
244 471
Cart mounted Unit
244 474
Cart mounted Unit
248 839
56:1 King Xtreme 900
Cart mounted Unit
244 478
56:1 King Xtreme 900,
Cart mounted Unit
quiet Air Motor
Cart mounted Unit
244 479
244 482
248 840
Cart mounted Unit
244 487
Cart mounted Unit
quiet Air Motor
Cart mounted Unit
244 488
244 491
244 496
244 497
244 500
Cart mounted Unit
quiet Air Motor
Cart mounted Unit
HF
CM
Dura Flo
Accessories
2 wheel cart, FRL (air filter, pressure regulator), suction
kit 200 L 2, (Lower 222 801)
kit 200 L, (Lower 222 796)
kit, 15m hose und gun, (Lower 222 801)
kit, 15m hose und gun, (Lower 687 055)
kit, fluid filter, hose/gun, (Lower 244 416)
(Pump 244416), fluid outlet 1“ 11 ½ NPT(f)
2 wheel cart, FRL (air filter, pressure regulator),
INT. filter, suction kit (5 gal.) 20L, without hose/gun,
(Lower 244 417)
INT. Filter, suction kit, ⅜″ hose 15m,
swivel, gun, GHD RAC, (Lower 244 417)
kit, without filter, hose/gun, (Lower 244 414)
(Pump 244414), fluid outlet 1“ 11 ½ NPT(f)
INT. Filter, suction kit, (Lower 244 415)
2 wheel cart, FRL (air filter, pressure regulator), INT.
Filter, suction kit, 15 m, ⅜″ hose, 1,8m whippend swivel,
gun, XHD RAC, (Lower 244 415)
2 wheel cart, FRL (air filter, pressure regulator), without
suction kit, fluid filter, hose/gun (Lower 244 412),
fluid outlet 1“ 11 ½ NPT(f)
INT. Filter, suction kit 15 m, ⅜″ hose, 1,8 m whippend,
swivel, gun, XHD RAC, (Lower 244 413)
INT. Filter, suction kit, 15m, ⅜″ hose, 1,8m whippend
swivel, gun, XHD RAC, (Lower 244 411)
= 4 ball type (HighFlo)
= Check Mate
= ″2″ ball type
13/02/09 11:38
1 - 35
Application
Airless
Manual
308 179
Airless
308 179
Airless Zinc
material
Cleaning
308 081
Airless
6000
134
309 329
Airless
309 342
309 329
Airless
309 342
309 329
Airless
309 329
Airless
309 342
309 329
309 342
309 329
309 342
309 329
Airless
Airless
Airless
309 329
Airless
309 342
309 329
309 342
309 329
309 342
309 329
Airless
Airless
Airless
Airless
Airless
309 342
309 329
309 342
309 329
309 342
309 329
KING
918 378
918 379
C59 522*
918 372
C59 521
918 315
918 313
13/02/09 11:38
1a - 36
241 082*
C59 769
241 606
241 607
KING
Part No.
918 379
obsolete
918 378
obsolete
918 380┼
obsolete
C59 777┼
241 630*┼
none CE
918 372
253 026┼
obsolete
970 018┼
obsolete
970 031┼
obsolete
253 293┼
obsolete
253 375┼
obsolete
241 082*
none CEobs
970 248┼
obsolete
970 247┼
P – Flo obs
C59 769*
none CE
261 629┼
CM5F79
6880 195┼
234 372┼
686 965*┼
none CEobs
918 315
obsolete
222 546*┼
none CE
C59 427*┼
none CE
C59 521
obsolete
970 074┼
obsolete
236 472┼
obsolete
234 373┼
Description
50:1 King, Check Mate
1000, Standard Air motor
1000, SST, Std Air motor
56:1 King, Dura Flo 900
Quiet Air motor
56:1 King, Dura Flo 900,
SST Quiet Air motor
65:1 King, Check Mate 800,
Quiet Air motor
65:1 King, Check Mate 800
Accessories
20L (5Gal.) two-pillar 3″, follower plate,
sealing ring PVC hose,
20L (5Gal.) two-pillar 3″, follower plate,
sealing ring Buna N wiper lip Ø 289,
20L (5Gal.) two-pillar 3″, follower plate alu. with
Buna N wiper lip Ø 289 mm,
20L (5Gal.) two-pillar 3″, follower plate, with NBR
wiper lip Ø 289, outlet 1¼″, back flow valve,
30L two-pillar 3″, follower plate,
with NBR wiper lip Ø330,
20L (5Gal.) two-pillar 3″, outlet 1 ¼″ back flow
valve, follower plate, sealing ring PVC hose,
similar 918 372 however lower SST,
Cart
Quiet Air motor
Quiet Air motor
Quiet Air motor
Quiet Air motor
Quiet Air motor
Quiet Air motor
Quiet Air motor
24:1 King, Ch Mate 2100,
SST, Quiet Air motor
2100, Quiet Air motor
1000 Standard Air motor
55:1 King
Standard Air motor
SST Quiet Air motor
similar 918 372, extra 4 wheel cart, 5 m ½″
Nylonhose, extrusion gun, air line lubricator,
Incl.: 918 372 with 3m HD hose and valve,
1 ¼″NPT(f),
20L two-pillar 3“ 20 L (5Gal.) follower plate, NBR
wiper lip Ø 289 mm, back flow valve,
20L (5 Gal.) two-pillar 3“ heated followplate,
Hotmelt lower, outlet, back flow valve,
30L two-pillar 3″, follower plate with NBR wiper lip
Ø330, outlet ½″ back flow valve,
Inc.: 241 082 with 3m HD hose, valve 1 ¼″NPT(f),
Quiet Air motor
C59 522*
none CEobs
918 313
obsolete
918 597┼
obsolete
918 314┼
obsolete
241 606
obsolete
241 607
obsolete
Standard Air motor
Standard Air motor
Standard Air motor
SST Standard Air
motor
Quiet Air motor
SST Pump
Quiet Air motor
10:1 King,
quiet Air motor
20:1 King, Dura Flo 2400,
quiet Air motor
Manual
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Extrusion
310 526
Hot melt
310 526
Extrusion
310 526
Transfer
Extrusion
310 526
Incl.: 241 082, 4 wheel cart, 5m ½″ Nylon hose,
Extrusion
extru. gun, air line lubricator,
200L (55Gal.) 3″ two-pillar, follower plate,
Extrusion
sealing ring, EPDM Hose,
200L (55Gal.) 6,5″ two-pillar, follower plate,
Extrusion
without wipe lip,
200L (55Gal.) 3″ two-pillar, follower platen,
Extrusion
sealing ring, EPDM hose,
200L 3″ two-pillar, FRL (air filter, pressure regulator), Printer´s ink
follower plate, Neoprenring (white), drum clamp,
Transfer
200L (55Gal.) 3″ two-pillar, follower plate, sealing
Extrusion
ring, EPDM hose,
200L (55Gal.) 6,5″ two-pillar, follower plate,
Extrusion
sealing ring EPDM hose,
200L 3″ two-pillar, follower plate, sealing ring,
Extrusion
EPDM hose, drum clamp,
200L (55Gal.) 3″ two-pillar, outlet 1 ¼″, back flow
Extrusion
valve, drum clamp, follower plate, sealing ring,
EPDM hose,
200L (55Gal.) 3″ two-pillar, outlet1 ¼″ back flow
Extrusion
valve, follower plate, sealing, EPDM hose,
Incl.: C59 521, 7,5m ½″HD hose, gun,
Extrusion
200L (55Gal.) 3″ two-pillar, follower plate sealing
EPDM hose,
200L 3″ two-pillar, FRL (air filter, pressure regulator),
follower plate, Neoprenring (white), drum clamp,
200L, 3″ two-pillar, short rod, 5Gal., follow plate with
blue PVC hose,
200L (55Gal;) 6,5″ two-pillar, follower plate sealing
ring, PVC hose,
ring, EPDM hose,
ring EPDM hose, outlet. 1 ¼″ back flow valve,
1000 L 6,5″ two-pillar, follower plate with wiper lip,
1000 L 6,5″ two-pillar, follower plate with wiper lip,
┼ not shown
13/02/09 11:38
Applikation
1 - 37
310 526
308 027
310 524
EU 391
308 027
308 027
310 524
308 027
308 027
308 027
Extrusion
308 027
Printer´s ink
Transfer
308 027
Extrusion
308 027
Extrusion
310 524
Extrusion
310 524
Extrusion
310 524
Transfer
Extrusion
Transfer
Extrusion
308 971
308 971
PREMIER
222 942
222 943
237 555
222 939
236 932
245 171*
Accessories
High-Volum Air Regulator
1” inlet 10,6 l/min
241 506
241 490
234 824
245 174
237 518
237 520
253 912
222 973
238 144
236 489
237 158
Air Filter
10l/min 1“ outlet
118 859
(308 169)
112 728
(308 168)
918 469
918 481
C59 702
13/02/09 11:38
1a - 38
PREMIER
Rep Kit:
222 958
Valve rep. Kit:
222 959
Detent Kit:
222 982
Shield conversion kit:
Air Motor: 222 800
Manual: 308 213
EC-decl.199 071
Techn. data:
Air inlet size:
Max air input pressure:
Max. cycles per min:
Operating temp.
Max. air consumption:
Part No.
222 942
241 506
222 943
237 555
241 490
222 939
234 824
245 171*
245 174
236 932
Description
34:1 Premier, DF 2400, 579 cm³
34:1 Premier
34:1 Premier, DF 2400, 579 cm³, SST,
45:1 Premier, DF 1800, 434 cm³
45:1 Premier, DF 1800, 434 cm³
45:1 Premier, DF 1800, 434 cm³, SST.
45:1 Premier, DF 1800, 434 cm³, SST,
ceramic balls,
67:1 Premier, DF 1200, 290 cm³, SST
67:1 Premier, DF 1200, 290 cm³, SST
74:1 Premier, DF 1100, 264 cm³
1” npsm(f)
7bar
50
12 - 65,5°C
7680 l/min
Accessories
Bare pump
(Lower 222 801)
Bare pump, long for 6,5″ RAM, 200L
Bare pump
(Lower 222 803)
Bare pump
(Lower 222 796)
Bare pump
(Lower 222 805)
(Lower 246 987)
Bare pump
(Lower 237 514)
Bare pump
(Lower 236 478)
Applikation Manual
308 151
Airless
Airless
Airless
Airless
Airless
308 152
308 147
308 148
308 148
Airless
308 812
Airless
308 357
Extrusion
310 524
Extrusion
310 524
Extrusion
310 524
Airless
311 683
Airless
308 215
Airless
308 215
Airless
308 415
Airless
308 415
* not CE marked
918 469
918 481
C59 702
253 912
222 973
238 144
236 489
237 158
34:1 Premier, DF 2400
Pump 241 506
Pump 234 824
Pump 245 174
200L, 6,5″ Two-pillar, follower plate ringe,
PVC hose, outlet 1 ¼″ back flow valve,
200L, 6,5″ Two-pillar, follower plate ringe,
PVC hose, outlet 1 ¼″ back flow valve,
200L, 6,5″ Two-pillar, follower plate ringe PVC hose,
outlet 1 ¼″ back flow valve,
Pump 222 942
Pump 237 555
Pump 237 555
Cart mounted unit, without suction kit filter, fluid hose,
gun – order sepatatley
Cart mounted unit, without suction kit filter, fluid hose,
gun – order sepatatley
Cart mounted unit with suction kit, fluid hose, ⅜″ 15 m,
¼″ 1,8 m whippend, gun and RAC with nozzle,
Cart mounted unit, with suction tube & hose
Cart mounted unit, with suction kit, fluid hose,
⅜″ 15 m, ¼″ 1,8 m, whippend, gun and RAC with nozzle,
Check Mate Pumps:
222 940┼
237 518
237 520
39:1 Premier, CM 2100
Bare pump, (Lower 222 810)
Bare pump, (Lower 222 954)
80:1 Premier, CM 1000 SST Bare pump, (Lower 236 613)
Extrusion
Extrusion
Extrusion
308 149
308 355
308 356
918 303┼
918 316┼
Extrusion
310 524
Extrusion
310 524
200L 6,5″ Two-pillar follower plate ring PVC hose,
200 L 6,5″ Two-pillar follower plate ring EPDM hose,
outlet 1 ¼″ back flow valve,
┼ not shown
13/02/09 11:38
1 - 39
ORION PUMPS & PACKAGES
245 723 air control – Airless, ¼″
Cart
243 606
Muffler
117 237
245 722 air control – AA system, ¼″
Filter SST
223 160
234 084
234 085
245 934
245 935
(15B 525)
Fitting NPT-BSPP
234 087
234 089
234 091
234 093
245 682 Air inlet
adapter ⅜” BSP (m)
245 718 Air inlet
adapter ¼” NPT (m)
C, D
A
B
(15B 525)
246 300
G40 Gun
Air hose
Fluid hose
Siphon kit
Air regulator
Pressure gauge
Fitting
Fitting
Manual: 309 573
A
incl.
249 242
241 811
239 107
15B526
116 513
110 436
162 453
115 219
Circulation accessories
A) 74188 015090
B) 77239 008003
C) 233 771
D) 233 772
246 301
sealing ring, SST, 17,0x21
double nipple, adjustable G⅜, L 49
Pressure regulator P100 – RM
Pressure regulator P200 – RM
Silver Gun
Fluid hose
Siphon kit
Manual: 309 573
Suctionhose/tube accessories
15B 282
15B 526
15B 283
15B 527
Suctionhose/tube, 30L with 1,8mm strainer
Suctionhose/tube 15B526 + Fitting 15B285
Suctionhose/tube, 200L with 1,8mm strainer
Suctionhose/tube 15B283 + Fitting 15B285
15B 528
016 689
hose I.D. 25mm (40 m roll) elect. conductive
77647 020004 Strainer (1,0) incl. clamp, Ø 28 mm
77647 020005 Strainer (1,8) incl. clamp, Ø 28 mm
5 6
4
3
2
7
Pos
1
2
3
4
5
6
7
8
6 5 8
No
Description
117 309 Filter Fluid 1,8mm (11 Mesh)
117 439 Filter fluid 1,0mm (18 Mesh)
117 614 Clamp hose
117 406 Clamp tube
234 110 Tube suction
117 352 Fitting hose
117 615 Clamp hose
7784035004 hose Ø 28mm
117 613 Fitting hose
Fitting 15B 285 Ø28mm 1”BSP(m)
Reserve gasket 75188 097003
reserve nut 75089 100003
(incl. ring and gasket)
1
13/02/09 11:38
Fitting 15B 284 Ø22mm 1”BSP(m)
Reserve gasket 75188 097002
1a - 40
incl.
235 462
239 107
15B526
ORION – PUMP & UNIT
Orion 15:1 170cm³ / cycles
Max flow 10,2 liter (60cycles/ min.)
recommend 4,25 liter (25cycles/min.)
Air consumption 0,45 m³ / min
Manual 309 512
EC decl. 199 068
Orion 28:1 100cm³ / cycles
Max flow 6,0 liter (60cycles/ min.)
recommend 2,5 liter (25cycles/min.)
Air consumption 0,45 m³ / min
Pump with bellow (for hygroscopic material) wetted parts in SST
Part No.
Description
Accessories
BSP thread pump with muffler (117 237) and safety valve (197 660)
245 935
015.085 Ratio 15:1, stroke 85 cm³ (cycle = 170 cm³)
245 934
NPT thread pump with muffler (117 237) and safety valve (197 660)
234 084
234 085
Note: With the normal suction tube for viscosity 750 mm²/s (cSt.)
Wall-mounted unit, with bracket (117 351), fluid filter (223 160), air control (245 723),
234 087
15:1 Orion
without accessories , order separately
234 089
28:1 Orion
Cart mounted unit Unit , with cart (243 606), fluid filter (223 160), air control (245 723),
234 091
15:1 Orion
with 2 wheel cart,
without accessories , order separately
234 093
28:1 Orion
thread
with BSPP thread
Inlet: 1“ BSPP (f)
Outlet: 3/8“ BSPP(f)
with NPT thread
Inlet: ¾ “ NPT(m)
Outlet: 3/8” NPT(m)
Outlet: ¼” NPT(m)
Outlet: ¼” NPT(m)
Repair Kit
234 043 Bellows 14:1 and 28:1 (equally air motor)
Accessory
Air Assistant
246 300 Accessories kit incl. suction kit 30L, with 1,8mm strainer, hose set 7,5m,
309 573
additional air control and fittings, G40 gun (249 242), nozzle AAM or GG4xxx
Airless
246 301 Accessories kit incl. suction kit 30L, with 1,8mm strainer, ¼″ hose set 7,5m,
308 573
Silver gun (235 462) and nozzle 163 xxx
15B 528 5 liter cup, SST with 1″ BSP(m) fitting, incl. filter disc 117 290 and bend spring 117289.
( 245 717 cup 5L and 15B284 fitting Ø 22 )
15B 525 Inlet fitting 1″ BSP x ¾″ NPT(m), fitting is delivery with cart and wall mounted unit, but it´s not needed for use by
accessories with BSP thread. Fitting is needed for use with NPT thread accessories.
13/02/09 11:38
1 - 41
GLUTTON PUMP
- Pump with bellow,
- for hygroscopic material,
- Viscosity to 4000cps
Technical data:
Air inlet
Max. pressure
Max. Air input
Fluid inlet
Fluid outlet
Max. suctiom lift
Max. operating temp.
Max continuous speed
Fluid per cycle
Fluid flow at 60 cpm
Manual 307843
4:1
½” npt(f)
28 bar
7 bar
1-1/4” npt(f)
1” npt(f)
4,57m
65°C
60 cycle/min
0,366 liter
21,2 liter/min
12:1
25:1
½” npt(f)
½” npt(f)
83 bar
170 bar
7 bar
7 bar
1-1/4” npt(f)
1-1/4” npt(f)
1” npt(f)
¾” npt(f)
4,57m
4,57m
65°C
65°C
60 cycle/min
60 cycle/min
0,128 liter
0,058 liter
7,35 liter/min
3,4 liter
EC - Decl. 190 544
Part No.
Description
Standard Repair Kit
Applikation
220 663
237 008
220 666
237 011
220 664
237 009
220 667
237 012
220 665
237 010
220 668
237 013
4:1 Glutton, UHMWPE
4:1 Glutton, Nylon
4:1 Glutton (SST), UHMWPE
4:1 Glutton (SST), Nylon
12:1 Glutton, UHMWPE
12:1 Glutton, Nylon
25:1 Glutton, UHMWPE
25:1 Glutton, Nylon
220 949
237 014
220 949
237 014
221 136
237 017
221 136
237 017
220 950
237 017
220 950
237 016
Delivery
Delivery
Delivery
Delivery
Delivery
Delivery
Delivery
Delivery
Airless
Airless
Airless
Airless
For material with Toluol or Xylol , use Pump with Nylon seals.
13/02/09 11:38
1a - 42
Manual
307 843
DYNAMITE 190
235 871
224 923
224 908
224 906
235 877
235 830
Part No.
Description
235 871
224 923
224 908
223 948
235 877
224 906
235 830
224 249
Dynamite 190 SST (without follower plate, order separately) , stroke high 228 mm
Follower plate, 1 kg, wiper ring rubber 187 740, Ø113,5 mm
Follower plate, 3 kg, wiper ring rubber 187 599, Ø172 mm
Follower plate protective plates (10 off)
Dispense valve handle
Dispense valve
Switch
Valve
Nozzle
size
Manual
part no.
0,84
1,19
1,60
1,80
13/02/09 11:38
224 249
111 250
111 252
111 254
111 255
1 - 43
308 302
308 302
308 302
308 302
308 266
308 266
308 266
308 099
NXT – index
NXT ™ – Air motor..............................................................
1b-2
Xtreme – Unit`s ...................................................................
Xtreme – Wall Mount Packages ..........................................
Xtreme – Pumps (Motor & Lower).. …………………………………
Xtreme – Lowers.................................................................
Xtreme – Accessories .........................................................
1b-5
1b-9
1b-10
1b-12
1b-14
DuraFlo ...............................................................................
DuraFlo – Wall Mount Packages .........................................
DuraFlo – Pumps (Motor & Lower) .............................................
DuraFlo – Lowers................................................................
DuraFlo – Accessories ........................................................
1b-15
1b-16
1b-18
1b-20
1b-21
HighFlo ...............................................................................
HighFlo – Wall Mount Packages .........................................
HighFlo – Pumps (Motor & Lower) .............................................
HighFlo – Lower..................................................................
HighFlo – Accessories ........................................................
1b-22
1b-23
1b-24
1b-26
1b-27
E-Flo ..................................................................................
1b-28
RAM - Check- Mate® & Dura Flo Ram.............................
RAM - Tandem Supply .....................................................
Check-Mate® Pump (Motor & lower) ..........................................
Dura Flo Pump (Motor & lower) ..............................................
Check-Mate® Lower ............................................................
RAM Accessories................................................................
1b-32
1b-34
1b-36
1b-38
1b-40
1b-42
18/02/09
1b - 1
NXT™ Air Motor
Manual: 311 238
II 1 G
EEx ia IIA T3
Nemko
06ATEX1124
Conforms to FM std
3600 & 3610 for use in
Class I Div 1 Group D
T3C Hazardous locations
0359
manual: 311 238
EC-declaration: 199 199
To find approximate air consumption
multiply air pressure + 1 bar atmospheric pressure then multiply by cycles per minute
Example : NXT6500 at 5 bar running at 10 cycles per minute gives,
(13 x 6 ) x 10 = 780 Liter per minute,
NXT2200 = 4,4Liter
NXT3400 = 6,8 Liter
NXT6500 = 13 Liter
Code:
Product No.
N
=
N
x
x
x
0
x
NXT -Air motor
reserve
options
Motor size
65
34
22
=
=
=
6500 cm³
3400 cm³
2200 cm³
Motor Type
D
L
R
=
=
=
de-ice
low noise
remote
N
R
T
H
=
=
=
=
non
remote (DataTrak)
DataTrak
Linear Sensor
Technical data:
Maximum air inlet pressure:
Air motor piston diameter:
Stroke length:
Air inlet size:
Remote exhaust outlet size:
Maximum Motor Speed:
Operating temperature
range:
Material of construction:
Seals and packings:
Weight:
18/02/09
100psi (0,7Mpa, 7,0 bar)
NXT Model 6500: 264mm
120 mm
¾“ npt (f)
1“ npt (f)
60 cycles per minute
0 - 60˚ C
Aluminium, ductile iron, stainless steel, carbon steel,acetal,
Polyethylene, Santoprene®, alloy steel, Polypropylene
Nitrile rubber
NXT Model 6500: 31kg
1b - 2
NXT - Air Motor
Manual: 311 238
3
N22DN0 2200cm
3
N22DT0 2200cm
3
N22DH0 2200cm
3
N22LN0 2200cm
3
N22LT0 2200cm
3
N22LH0 2200cm
3
N22RN0 2200cm
3
N22RT0 2200cm
3
N22RH0 2200cm
3
N22LR0 2200cm
3
N34DN0 3400cm
3
N34DT0 3400cm
3
N34DH0 3400cm
3
N34LN0 3400cm
3
N34LT0 3400cm
3
N34LH0 3400cm
3
N34RN0 3400cm
3
N34RT0 3400cm
3
N34RH0 3400cm
3
N34LR0 3400cm
3
N65DN0 6500cm
3
N65DT0 6500cm
3
N65DH0 6500cm
3
N65LN0 6500cm
3
N65LT0 6500cm
3
N65LH0 6500cm
3
N65RN0 6500cm
3
N65RT0 6500cm
3
N65RH0 6500cm
3
N65LR0 6500cm
DataTrak
6.0 (152)
6.0 (152)
6.0 (152)
6.0 (152)
6.0 (152)
6.0 (152)
6.0 (152)
6.0 (152)
6.0 (152)
6.0 (152)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
7.5 (191)
10,375 (264)
10,375 (264)
10,375 (264)
10,375 (264)
10,375 (264)
10,375 (264)
10,375 (264)
10,375 (264)
10,375 (264)
10,375 (264)
x
x
x
x
x
x
(T)
(R)
(H)
Sensor
Air valve
kit
(Complete)
NXT107
NXT108
x NXT109
x
NXT107
x
x
NXT108
x
x NXT109
x
NXT107
x x
NXT108
x
x NXT109
x
NXT107
NXT107
x
NXT108
x NXT109
x
NXT107
x
x
NXT108
x
x NXT109
x
NXT107
x x
NXT108
x
x NXT109
x
NXT107
NXT107
x
NXT108
x NXT109
x
NXT107
x
x
NXT108
x
x NXT109
x
NXT107
x x
NXT108
x
x NXT109
x
NXT107
“ x “ = included
PistonPackage
kit
x
NXT200
NXT300
NXT600
De-ice Low noise
Remote
Data
Trak
Conversion
NXT110
kit
NXT104
NXT105
NXT110
,- - -
,- - -
,- - -
NXT111
,- - -
,- - -
,- - -
NXT105
NXT110
---
,- - -
NXT110
,- - -
,- - -
,- - -
NXT111
,- - -
,- - -
,- - -
NXT105
NXT110
,- - -
,- - -
NXT110
,- - -
,- - -
,- - -
NXT111
,- - -
,
---
,- - -
NXT105
,- - -
,- - -
NXT110
Sensor
NXT _06 287 839
--NXT 206
----NXT 206
----NXT 206
--NXT 406
--NXT 306
----NXT 306
----NXT 306
--NXT 406
--NXT 606
----NXT 606
----NXT 606
--NXT 406
----287 839
----287 839
----287 839
------287 839
----287 839
----287 839
------287 839
----287 839
----287 839
---
“- - -“ = not included
Error code:
Runaway
Pump running faster
than set runaway
limit.
• Increased air pressure.
• Increased fluid output.
• Exhausted fluid supply.
E-1
Diving Up
Leak during upstroke.
Worn piston valve or packings.
E-2
Diving Down
Leak during downstroke.
Worn intake valve.
E-3
Low Battery
E-4
Service
Component 1
Disconnected
Solenoid
Battery voltage too low
to stop runaway.
Problem with stopping
runaway.
Solenoid is disconnected.
• Ultralife lithium # U9VL • Duracell alkaline # MN1604
• Energizer alkaline # 522• Varta alkaline # 4922
• Damaged solenoid.
• Damaged valve carriage
• Solenoid unplugged.
• Damaged solenoid wires.
• Sensors unplugged.
• Sensors mounted incorrectly.
• Damaged sensors.
• Damaged valve carriage.
• Faulty solenoid or solenoid wiring.
• Extreme temperatures (above 140°F[60°C])
Fuse NXT 413 (250mA)
E-4
18/02/09
x
x
x
DataTrak
inc.
(mm)
Remote 1
∅
(L)
Serie"D"
Repair - Kit / Conversion - Kit
(D)
Piston
Low noise
Model
De ice
Air
Motor
E-5
Service
Component 2
Problem with sensing
valve movement.
E-6
Blown Fuse
Fuse is blown.
1b - 3
NXT - Air Motor
Accessories:
Connection Kit lower pump
28820 9
Large “mid range” Hi-Flo 1000/1500/2000
28820 2
Small “mid range” Hi-Flo 730/1000/1500
28820 3
Hi-Flo Plus
28820 4
Large DuraFlo 1800/2400
28820 5
Small DuraFlo 600/750/900/1200
28820 6
1000cc DuraFlo
28820 7
Xtreme 145/ 180/ 220/ 250/ 290 (cm³)
288 860
Xtreme 85/ 115 (cm³)
Length shoulder to shoulder
362 mm
362 mm
490 mm
391 mm
391 mm
391 mm
362 mm
362 mm
(14,25 inc.)
(14,25 inc.)
(19,307 inc.)
(15,4 inc.)
(15,4 inc.)
(15,4 inc.)
(14,25 inc.)
(14,25 inc.)
Air Motor "NXT"
2200, 3400
2200, 3400, (6500)
6500
3400, 6500
2200, 3400
3400
3400, 6500
2200, 3400
other pumps connection look manual: 311 876
Adapter to connect the NXT to a Graco lower
A=3/4-16UNF-2A
15H369
HighFlo B = M22 x 1,5
15H371
DuraFlo 430-590cm³ B = M38 x 2
15H370
DuraFlo 145-290cm³ B= 1-1/4-12UNF-2A 15H392 ┼ Xtreme
Art. No:
NXT011
NXT021
NXT031
NXT 406 ┼
255 415
214 848
214 849
111 897 ┼
288 527
NXT 606
NXT 306
NXT 206
NXT 413 ┼
100 101 ┼
Description
Manual
Air control Module, with locking regulator, 7,6 bar (Standard with MSN-MCN)
311 239
Air control Module, with non locking regulator, 7,6 bar
Air control Module, with locking regulator, 5,8 bar
Remote DataTrak connection Kit
Remote DataTrak module
311 238
Lubricator Air Motor NXT 2200 – 3400
½” in and outlet / 17,5 bar / 240ml capacity
Lubricator Air Motor NXT 6500
¾” in and outlet / 17,5 bar / 480ml capacity
Muffler (threaded 1”) for use with remote exhaust manifold
Air regulator mounting kit (for Air-Mix spraying)
DataTrak conversion Kit, NXT Model 6500
311 486
Fuse DataTrak 125V 250mA
NXT 112┼
Knob de-ice (5 pieces)
Screw mounting (four pieces are used)
100 133┼
Washer mounting (four pieces are used)
┼ not shown
A
NXT 606
NXT 306
NXT 206
Connection Kit 288 xxx
B
DataTrak conversion Kit
15H 369
15H 370
15H 371
NXT 011
NXT 021
NXT 031
Air – control module
214 848
214 849
18/02/09
255 415
288 527
Air-Mix Kit
1b - 4
Xtreme Unit`s
(CarbonSteel)
Manual: 311 164
II 2 G
Technical data:
Air inlet size:
Fluid inlet size:
Fluid outlet size:
¾” npt (f)
1-1/4 npt (m)
Pumps with built-in filters
(2 outlet ports) : = ½” npt (m)
Pumps without built-in filters
(1 outlet port) :
115cm³ = ½” npt (f)
145cm³ and 180cm³ = ¾” npt (f)
220cm³, 250cm³, and 290cm³ = 1” npt (f)
Code:
Product No.
X
=
Motor size
25 =
30 =
35 =
40 =
45 =
46 =
50 =
55 =
60 =
70 =
90 =
X
x
x
x
x
Xtreme pump
25:1
30:1
35:1
40:1
45:1
46:1
50:1
55:1
60:1
70:1
90:1
Motor Type
D =
de-ice
L =
low noise
R =
remote
3400cm³Motor / 290cm³ Lower
Mounted
W =
wall mount
H =
heavy duty
options
1 =
complete unit with DataTrak
2 =
bare unit with DataTrak
3 =
complete unit without DataTrak
18/02/09
x
4 =
5 =
6 =
bare unit without DataTrak
complete unit with DataTrak and material container
complete unit no DataTrak with material container
1b - 5
Xtreme Unit`s
Wall mounted
X25 DW2 bis X90 LW2
X25 DW2 bis X90 LW4
Heavy-duty
Airless units
not shown Model 287978
40:1 ext. Filter (218029)
Air-assisted units
287 975
288 976
for zinc material
287 971, 287 972
287 973, 287 974
Ext. Filter
Suction Kit (CS)
(60Mesh)
1 ¼” NPT
218 029
245 176
Material container 288 347
for Xtreme, ca. 23 Liter
(Manual: 311 902)
18/02/09
1b - 6
Xtreme Unit`s
Motor: 311 238
Part No. Pump
X35 DW2
X35 DW4
287 978
P35EC4
P35DC4
P40MC3
P30EC4
P30EC4
P30DC4
P30DC4
P35EC4
P35EC4
P35DC4
P35DC4
P40EC4
P40EC4
P40DC4
P40DC4
P45EC4
P45EC4
P45DC4
P45DC4
P45MC4
P45MC4
P45LC4
P45LC4
P55EC4
P55EC4
P55DC4
P55DC4
P60EC4
P60EC4
P60DC4
P60DC4
P70EC4
P70EC4
P70DC4
P70DC4
P70MC4
P70MC4
P70LC4
P70LC4
P90EC4
P90EC4
P90DC4
P90DC4
P90MC4
P90MC4
P90LC4
P90LC4
DataTrak: 311 486
Lower
Wall mount
Motor
All unit with suction kit(245 176)
35:1, D-ICE, Bare unit, Data Trak
L115C2
35:1, D-ICE, Bare unit without Data Trak
40:1, LowNoise, DataTrak, ext.Filter, without air control
L180C1
Part No. Pump
X30 DH1
X30 DH2
X30 DH3
X30 DH4
X35 DH1
X35 DH2
X35 DH3
X35 DH4
X40 DH1
X40 DH2
X40 DH3
X40 DH4
X45 DH1
X45 DH2
X45 DH3
X45 DH4
X45 LH1
X45 LH2
X45 LH3
X45 LH4
X55 DH1
X55 DH2
X55 DH3
X55 DH4
X60 DH1
X60 DH2
X60 DH3
X60 DH4
X70 DH1
X70 DH2
X70 DH3
X70 DH4
X70 LH1
X70 LH2
X70 LH3
X70 LH4
X90 DH1
X90 DH2
X90 DH3
X90 DH4
X90 LH1
X90 LH2
X90 LH3
X90 LH4
Manual: 311 164
Air control module NXT: 311 239
Lower
Mobile unit
All units with suction kit (245 176)
30:1, D-ICE, Complete unit, DataTrak
30:1, D-ICE, Bare unit, DataTrak
30:1, D-ICE, Complete unit, without DataTrak
30:1, D-ICE, Bare unit, without DataTrak
35:1, D-ICE, Complete, unit without DataTrak
40:1, D-ICE, Bare unit, without Dat Trak
45:1, D-ICE, Complete unit without DataTrak
45:1, D-ICE, Bare unit without DataTrak
45:1, L.Noise, Complete unit DataTrak
45:1, L.Noise, Bare unit DataTrak
45:1, L.Noise, Complete, unit without DataTrak
45:1, L.Noise, Bare unit, without DataTrak
60:1, D-ICE, Bare unit ,without DataTrak
70:1, L.Noise, Complete unit, DataTrak
70:1, L.Noise, Bare unit,DataTrak
70:1, L.Noise, Complete, without DataTrak
90:1, L.Noise, Complete unit, DataTrak
90:1, L.Noise, Bare unit, DataTrak
90:1, L.Noise, Complete unit, without DataTrak
All lower with int. Filter 60 Mesh /
Air motor with air control kit NXT 021
∅ piston
Motor
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
hose
p.
15 m
H43850 1
H43850 1
H43850 1
H43850 1
H43850 1
H43850 1
H43850 1
H43850 1
H43850 1
H43850 1
(∅10,4")
N65LN0
(∅10,4")
XTR704
XTR704
XTR704
XTR704
XTR704
XTR704
XTR704
XTR704
XTR704
XTR704
XTR704
XTR704
-
1
1
1
1
1
1
1
1
1
1
1
1
-
H52506
H52506
H72506
H72506
H72506
H72506
H72506
H72506
H72506
H72506
H72506
H72506
-
1
1
1
1
1
1
1
1
1
1
1
1
-
H53850
H53850
H73850
H73850
H73850
H73850
H73850
H73850
H73850
H73850
H73850
H73850
-
1
1
1
1
1
1
1
1
1
1
1
1
-
(∅7,5")
N34DN0
(∅6")
N22DN0
(∅6")
N34DT0
(∅7,5")
N34DN0
(∅7,5")
N65DT0
L 290C2
(∅10,4")
N65DN0
(∅10,4")
N65LT0
(∅10,4")
N65LN0
(∅10,4")
N34DT0
L115C2
(∅7,5")
N34DN0
(∅7,5")
N65DT0
L220C2
(∅10,4")
N65DN0
(∅10,4")
N65DT0
L180C2
(∅10,4")
N65DN0
(∅10,4")
N65LT0
L145C2
(∅10,4")
N65LN0
(∅10,4")
N65DT0
(∅10,4")
N65DN0
(∅10,4")
N65LT0
Spray
gun
XTR504
XTR504
XTR504
XTR504
XTR504
XTR504
XTR504
XTR504
XTR504
XTR504
p.
1
p.
(∅7,5")
N22DT0
L180C2
Suction p.
Tube
hose
1,8 m
H42506
H42506
H42506
H42506
H42506
H42506
H42506
H42506
H42506
H42506
N34DT0
L115C2
Adapter p.
bracket
N22DT0 248613 1 243312 1 247302
(∅ 6" )
Bare wall mounted
N34LT0
∅ piston
L 220C2
Bracket p.
/ other units see Key code
Part No.
Pump
Zinc – Units with suction kit (245 176)
lower
Motor
gun
p.
hose
p.
hose
p.
287 971
287 972
287 973
287 974
P25DC3
P40DC3
P25EC3
P40EC3
25:1, D-ICE, without DataTrak, Filter or aircontrol
40:1, D-ICE, without DataTrak, Filter or aircontrol
25:1, D-ICE, DataTrak, without Filter or aircontrol
40:1, D-ICE, DataTrak, without Filter or aircontrol
Air Assisted – Units with suction kit
30:1, complete unit, D-ICE, DataTrak, Filter
40:1, complete unitt, D-ICE, DataTrak, Filter
L290C1
L180C1
L290C1
L180C1
lower
L220C2
L180C2
N34DN0
----238591
SilverGun
1
----H42506
1,8m
1
----H43850
15m
1
gun
249238
G40
p.
1
hose
H52550
Material
Part No.
287 975
287 976
Pump
P30EC4
P40EC4
DataTrack / De-ice
18/02/09
DataTrack / Low Noise
Low Noise
1b - 7
De Ice
N34DT0
Motor
N34DT0
N34DT0
St. Hose p.
1 210868 1
Air
Hose, Fittings, Guns - Xtreme Unit`s
Part No.
H42503
H42506
H42510
H42525
H42550
H4251x
H43803
H43806
H43810
H43825
H43850
H4381x
H45010
H45025
H45050
H4501x
H72503
H72506
H72510
H72525
H72550
H7251x
H73803
H73806
H73810
H73825
H73850
H7381x
H75002
H75003
H75010
H75025
H75050
H7501x
Thread
1 / 4 – 18 NPSM
3 / 8 – 18 NPSM
1 / 2 – 18 NPSM
1 / 4 – 18 NPSM
3 / 8 – 18 NPSM
1 / 2 – 18 NPSM
Length
0,9m
1,8m
3m
7,6m
15,2m
30,5m
0,9m
1,8m
3m
7,6m
15,2m
30,5m
3m
7,6m
15,2m
30,5m
0,9m
1,8m
3m
7,6m
15,2m
30,5m
0,9m
1,8m
3m
7,6m
15,2m
30,5m
0,9m
1,8m
3m
7,6m
15,2m
30,5m
Description
Pressure
Fluid hose
310 bar
310 bar
Fluid hose
Fluid hose
310 bar
Fluid hose
500 bar
Fluid hose
500 bar
Fluid hose
500 bar
240 797
239 984
3/8 – 18 NPSM
¼” – 18 NPSM
15,2m
63,5cm
Fluid hose SST
Fluid hose SST
227 bar
227 bar
210 868
1 / 4 – 18 NPSM
15,2m
Air Hose
14 bar
189 018
164 856
238 591
XTR 504
XTR 704
Swivel 1/4 NPSM(f) to 1/4 NPSM(m)
Reducing nipple 3/8 NPT(m) - 1/4 NPT(m) (SST)
SilverGun, 4 finger, GHD 619
Gun, 4 finger trigger, swivel ¼”NPSM, RAC XHD Tip 519
Gun, 4 finger trigger, swivel ¼”NPSM, RAC XHD Tip 519
517 bar
550 bar
345 bar
345 bar
500 bar
Strainer - Xtreme Filter
Part No. *
(1 piece)
167 052*
167 024*
167 053*
167 025*
167 054*
167 026*
167 055*
167 027*
Part No.
(2 piece)
236 495
224 458
236 496
224 459
236 497
224 468
236 498
224 469
Part No.
(25 piece)
238 444
238 436
238 446
238 438
238 448
238 440
238 450
238 442
For lower „Xtreme“
xxx (cm³)
085 - 115
145 – 180 – 250 – 290 - 290
085 - 115
145 – 180 – 250 – 290 - 290
085 - 115
145 – 180 – 250 – 290 - 290
085 - 115
145 – 180 – 250 – 290 - 290
* in Europe obsolete please order in piece of two
18/02/09
1b - 8
Mesh (Micron)
30 (590)
60 (250)
100 (149)
200 (74)
Manual: 312 358
Wall Mount Packages
Xtreme ”Carbon Steel“
II II 2 G
incl.:
- Air Motor xxxLT0
- DataTrak
- Air Control NXT011
- Lower
- Bracket 255 143
- Connecting kit
Xtreme
Package
Ratio
116 MCN*
216 MCN*
316 MCN*
125 MCN
225 MCN
325 MCN
130 MCN
230 MCN
330 MCN
16:1
16:1
16:1
25:1
25:1
25:1
30:1
30:1
30:1
Pump
Motor
Lower
Suction Kit
19L (CS)
200L (CS)
--247 472
----247 472
----247 472
---
----247 473
----247 473
----247 473
Filter Kit
(CS)
out 3/8” npt(m)
P16MC1
P16MC1
P16MC1
P25MC1
P25MC1
P25MC1
P30MC1
P30MC1
P30MC1
N22LT0
N22LT0
N22LT0
N34LT0
N34LT0
N34LT0
N34LT0
N34LT0
N34LT0
L29AC1
L29AC1
L29AC1
L290C1
L290C1
L290C1
L220C1
L220C1
L220C1
--247 474
247 474
--247 474
247 474
--247 474
247 474
* = incl. Adapter 15H 060 (1x) and Lock/Nut 101 566 (4x)
Code:
x
Product No.
1
2
3
4
5
6
7
=
=
=
=
=
=
=
Xtreme (bare)
Xtreme 19 Liter
Xtreme 200Liter
DuraFlo (bare)
DuraFlo 19 Liter
DuraFlo 200Liter
High-Flo (bare)
1. 03
1. 04
16
25
=
=
=
=
3:1
4:1
16:1
25:1
x x
x
18/02/09
x
C = CS
S = SST
M
S
Ratio
30
40
45
46
x
=
=
=
=
N
B
T
30:1
40:1
45:1
46:1
1b - 9
=
=
Motor Type
low noise / dataTrak
Remote / dataTrak
Connection
=
NPT
=
BSPP, SST, MaxLife (piston & rod)
=
Tri-clamp
Xtreme Air motor & lower ”Carbon Steel“
Manual: 311 164
Technical data:
Air inlet size:
Fluid inlet size:
Fluid outlet size:
¾” npt (f)
1-1/4 npt (m)
Pumps with built-in filter (2 outlet ports) :
all = ½” npt (m)
Pumps without built-in filter (1 outlet port) :
115cm³ = ½” npt (f)
145cm³ and 180cm³ = ¾” npt (f)
220cm³, 250cm³, and 290cm³ = 1” npt (f)
Shown is model with built-in Filter
Code:
Product No.
P
x
x
x
C
x
C
P
=
Carbon Steel
Pump
Motor size
25
=
25:1
30
=
30:1
=
35:1
35
=
40:1
40
=
45:1
45
=
46:1
46
=
50:1
50
55
=
55:1
60
=
60:1
70
=
70:1
=
90:1
90
18/02/09
=
3400cm³Motor / 290cm³ lower
D
E
L
M
Motor Type
=
de-ice
=
de-ice & DataTrak
=
low noise
=
low noise & DataTrak
1
2
3
4
1b - 10
option
=
=
=
=
No built-in filter / no air control
Built-in filter / non air control
No built-in filter / air control
Built-in filter / air control
Xtreme Air motor & lower ”Carbon Steel“
Manual: 311 164
motor: 311 238
lower: 311 762
(lower size: 115cm³, 145cm³, 180cm³, 220cm³, 250cm³, 290cm³)
Pump
Motor &
lower
P21DC1
P21EC1
P21LC1
P21MC1
P24DC1
P24EC1
P24LC1
P24MC1
P25DC1
P25EC1
P25LC1
P25MC1
P30DC1
P30EC1
P30LC1
P30MC1
P31DC1
P31EC1
P31LC1
P31MC1
P40DC1
P40EC1
P40LC1
P40MC1
P45DC1
P45EC1
P45LC1
P45MC1
P46DC1
P46EC1
P46LC1
P46MC1
P50DC1
P50EC1
P50LC1
P50MC1
P55DC1
P55EC1
P55LC1
P55MC1
P60DC1
P60EC1
P60LC1
P60MC1
P70DC1
P70EC1
P70LC1
P70MC1
P90DC1
P90EC1
P90LC1
P90MC1
Air - Motor
Ratio
∅
21:1
6"
24:1
6"
25:1
7,5"
30:1
7,5"
31:1
6"
40:1
7,5"
45:1
10,4"
46:1
7,5"
50:1
10,4"
55:1
7,5"
60:1
10,4"
70:1
10,4"
90:1
10,4"
DataTrack / De-ice
18/02/09
Air pressure
max. 7Bar
N22DN0
N22DT0
N22LN0
N22LT0
N22DN0
N22DT0
N22LN0
N22LT0
N34DN0
N34DT0
N34LN0
N34LT0
N34DN0
N34DT0
N34LN0
N34LT0
N22DN0
N22DT0
N22LN0
N22LT0
N34DN0
N34DT0
N34LN0
N34LT0
N65DN0
N65DT0
N65LN0
N65LT0
N34DN0
N34DT0
N34LN0
N34LT0
N65DN0
N65DT0
N65LN0
N65LT0
N34DN0
N34DT0
N34LN0
N34LT0
N65DN0
N65DT0
N65LN0
N65LT0
N65DN0
N65DT0
N65LN0
N65LT0
N65DN0
N65DT0
N65LN0
N65LT0
Lower
package
Number / area / size
leather / UHMWPE
* Standard
TuffStack/ PTFE
* Standard
L22AC1
Xtreme
900mm²
(220 cm3)
244 852*
244 902
L18AC1
Xtreme
750mm²
(180 cm3)
244 851*
244 901
L290C1
Xtreme
1200mm²
(290 cm3)
244 854*
244 904
L220C1
Xtreme
900mm²
(220 cm3)
244 852*
244 902
L14AC1
Xtreme
600mm²
(145 cm3)
244 850*
244 900
L18AC1
Xtreme
750mm²
(180 cm3)
244 851*
244 901
L290C1
Xtreme
1200mm²
(290 cm3)
244 854*
244 904
L145C1
Xtreme
600mm²
(145 cm3)
244 850*
244900
L250C1
Xtreme
1045mm²
( 250 cm3)
244 853*
244903
L115C1
Xtreme
480mm²
( 115 cm3)
288 058*
288 060
L220C1
Xtreme
900mm²
( 220 cm3)
244 852*
244902
L180C1
Xtreme
750mm²
( 180 cm3)
244 851*
244901
L145C1
Xtreme
600mm²
( 145 cm3)
244 850*
244900
DataTrack / Low Noise
Low Noise
NXT 6500m³
+
Lower
Xtreme
=
NXT+ Lower =
Code: P xx x x x
De-Ice
1b - 11
Xtreme Lower
”Carbon Steel“
Manual: 311 762
Technical data:
Fluid inlet size:
Fluid outlet
size:
1-1/4 npt (m)
Pumps with built-in filter:
(2 outlet ports) : ½” npt (m)
Pumps without built-in filter :
(1 outlet port) :
115cm³ = ½” npt (f)
145cm³ and 180cm³ = ¾” npt (f)
220cm³, 250cm³, and 290cm³ = 1” npt (f)
Maximum Operating temperature:
82˚ C
Code:
Product No.
L
x
x
x
C
x
C
L
=
Motor size
85
=
115
=
145
=
180
=
220
=
250
=
290
=
18/02/09
=
Carbon Steel
Lower Xtreme
1
2
3
4
85cm³ lower
115cm³ lower
145cm³ lower
180cm³ lower
220cm³ lower
250cm³ lower
290cm³ lower
1b - 12
=
=
=
=
option
No built-in filter / Xtreme seal
Built-in filter / Xtreme seal
No Built-in filter / Tuff Stack
Built-in filter / Tuff Stack
Xtreme - Lower
”Carbon Steel“
Rep. kit (gasket)
description
Part no.
Fluid inlet:
Fluid outlet with filter:
Fluid outlet without filter:
L115C1
L115C2
L115C3
L115C4
L145C1
L145C2
L145C3
L145C4
L180C1
L180C2
L180C3
L180C4
L220C1
L220C2
L220C3
L220C4
L250C1
L250C2
L250C3
L250C4
L290C1
L290C2
L290C3
L290C4
Manual: 311 762
1-1/4” NPT (m)
all = ½” NPT(f)
115cm³ = 1/2"NPT(f)
145cm³ - 180cm³ = ¾”NPT(f)
220cm³ - 250cm³ - 290cm³ = 1” NPT (f)
filter, packing Leather/UHMWPE
Lower without built-in
Lower with built-in filter,
Lower without built-in filter,
Lower without built- in filter,
packing Leather/UHMWPE
packing TuffStack/PTFE
Pump with
built-in filter
18/02/09
leather
TuffStack/
UHMWPE
PTFE
* Standard * Standard
288058*
288058*
288058
288058
244850*
244850*
244850
244850
244851*
244851*
244851
244851
244852*
244852*
244852
244852
244853*
244853*
244853
244853
244854*
244854*
244854
244854
Pump without
built-in filter
1b - 13
288060
288060
288060*
288060*
244900
244900
244900*
244900*
244901
244901
244901*
244901*
244902
244902
244902*
244902*
244903
244903
244903*
244903*
244904
244904
244904*
244904*
cm³
per
cycle
115cm
/DH
3
145cm
/DH
3
180cm
/DH
3
220cm
/DH
3
250cm
/DH
3
290cm
/DH
3
Accessories: Xtreme ”Carbon Steel“
247 472
247 473
┼ 189 920
Suction Kit CS 1-1/4“ in. 5 Gal (19 litre)
Suction Kit CS 1-1/4“ in. 55 Gal (208 litre)
Strainer SST 1“ , 8 Mesh
247 474
┼ 159 239
Kit - Fluid Filter CS 1“ in. (incl. 167 025, 60 Mesh)
Adapter ½“ - ⅜“ , need for use Kit 247 474 with lower 115cm³
287 884
255 143
247 312
101 566
312 358
307 273
2 wheels cart, Heavy duty
Bracket mounting,
Adapter, needed for using 255 143 or 287 884 with Air motor NXT2200cm³
Lock Nut (1 piece) to fit 247 312 need 4 x 101 566
246 146
246 147
245 190
245 191
288 207
288 860
┼ not shown
Wet cup kit for: (need to change the nut !!)
Wet cup kit for: (need to change the nut !!)
Inlet ball spring for:
Inlet ball spring for:
Connection Kit Xtreme
Connection Kit Xtreme
Wet cup
3
3
Xtreme 145 cm , 180cm
(Nut 197 330)
3
3
3
Xtreme 220cm , 250 cm , 290 cm (Nut 197 331)
3
3
Xtreme 145 cm , 180cm
3
3
3
Xtreme 220 cm , 250 cm , 290 cm
145, 180, 220, 250, 290 (cm³) / NXT 3400 & 6500
85, 115, (cm³)
/ NXT 2200 & 3400
Connection kit
Inlet ball spring
246 146
need
(197 330)
245 190
245 191
246 147
need
(197 331)
288 207
288 860
Suction Kit
Kit Fluid-Filter
Heavy Duty
247 472
Adapter plate
247 312
247 473
Lock Nut
(adapter plate)
247 474
101 566 (1St.)
Stand
287 884
Bracket Mounting
255 143
253 692
18/02/09
1b - 14
Dura - Flo
”Stainless Steel”
Manual: 311 828
311 826
II II 2 G
Technical data:
Fluid inlet
size:
DF600 (145cm³), DF750 (180cm³):
DF 900 (220cm³), DF1200 (290cm³):
DF1800 (430cm³), DF2400 (580cm³):
DF N.N. (1000cm³):
Fluid
DF600 (145cm³), DF750 (180cm³):
outlet
DF 900 (220cm³), DF1200 (290cm³):
size:
DF1800 (430cm³), DF2400 (580cm³):
DF N.N. (1000cm³):
Code:
Product No.
P
x
x
x
x
x
C = CS
S = SST
P
=
Pump (DuraFlo)
Motor size
0, 06 =
6:1
10 =
10:1
12 =
12:1
15:1
15 =
16 =
16:1
21 =
21:1
23 =
23:1
24 =
24:1
25 =
25:1
30 =
30:1
31 =
31:1
32:1
32 =
40 =
40:1
45 =
45:1
46 =
46:1
*
~
l'
18/02/09
3400cm³motor / 1000cm³ lower
Motor Type
= de-ice
= de-ice / DataTrak
= low noise
= low noise / DataTrak
= HighLevel Sensor
Package
A* = 3 UHMWPE/ 2 PTFE
B* = 3 UHMWPE/ 2 Tuff-Stack
D* = 3 PTFE / 2 leather
E~ = 4 leather / 1 PTFE
H~ = 3 PTFE / 2 leather
S~ = Severe Duty
G'
= PTFE / PTFE
K'
UHMWPE / leather
D
E
L
M
H
Package only Pump 12:1/15:1/23:1/32:1
Package only Pump 16:1/21:1/24:1/25:1/30:1/31:1/40:1/45:1/46:1
Package only Pump 6:1 / 10:1
1b - 15
1-1/2” npt (f)
2”npt(f)
2” npt (f)
2” npt (f)
¾” npt (f)
1” npt (f)
1-1/2” npt (f)
1-1/2 ” npt (f)
65,5˚ C
DURA – FLO ”Stainless Steel”
Wall-mount packages
Part No.
Ratio
416 MSN
516 MSN
616 MSN
425 MSN
525 MSN
625 MSN
430 MSN
530 MSN
630 MSN
440 MSN
445 MSN
446 MSN
16:1
16:1
16:1
25:1
25:1
25:1
30:1
30:1
30:1
40:1
45:1
46:1
Manual 312 358
Pump
Motor
P16 MSE
P16 MSE
P16 MSE
P25 MSE
P25 MSE
P25 MSE
P30 MSE
P30 MSE
P30 MSE
P40 MSE
P45 MSE
P46 MSH
Lower
N22LT0
N22LT0
N22LT0
N34 LT0
N34 LT0
N34 LT0
N34 LT0
N34 LT0
N34 LT0
N34 LT0
N65 LT0
N34 LT0
247 192
247 192
247 192
237 514
237 514
237 514
236 470
236 470
236 470
236 456
237 514
236 458
Suction
19L(SST)
244 477*
247 477
244 477*
244 477*
247 477
244 477*
244 477*
247 477
244 477*
244 475*
244 475*
244 475*
kit
Filter Kit
200L(SST)
244 478*
244 478*
out3/8”NPT
247 478
244 478*
244 478*
247 478
244 478*
244 478*
247 480*
247 480
247 480
247 480*
247 480
247 480
247 480*
247 478
247 480
247 480
244 476*
244 476*
244 476*
247 479*
247 479*
247 479*
*all lowers are SST stainless steel, with Air control, DataTrak and wall bracket
* incl. Adapter 1x) and Lock/Nut 101 566 (4x)15H 060)
* not incl. buy separately
x
Product No.
1
2
3
4
5
6
7
=
=
=
=
=
=
=
Xtreme (bare)
Xtreme 19Liter
Xtreme 200Liter
DuraFlo (bare)
DuraFlo 19Liter
DuraFlo 200Liter
Hig-Flo (bare)
1 03
. 04
1
. 16
25
=
=
=
=
3:1
4:1
16:1
25:1
x x
x
18/02/09
x
C = CS
S = SST
M
S
Ratio
30
40
45
46
x
=
=
=
=
N
B
T
30:1
40:1
45:1
46:1
1b - 16
=
=
Motor Type
low noise / DataTrak
Remote / DataTrak
Connection
= NPT
= BSPP, SST, MaxLife (piston & rod)
= Tri-clamp
DURA - FLO
Dura-Flo Packages ”Stainless Steel”
Hydra-Clean®
Part No.
247 549
247 550
247 551
247 552
247 553
247 554
Manual: 312 585
Hydra – Clean
(SST-Lower)
12:1 card,
Complete unit
12:1 wall,
with air control
23:1 card,
NXT021 and
23:1 wall,
30:1 card,
30:1 wall,
Motor
Lower
(size)
247 599
N34 DN0
(580cm³)
Items incl.
Gun 247879,
Hose (15m), 214 959
Whip end (1,8m), 247 878,
Suction Kit 166 630,
Strainer 15T284,
Tip 805446 / 805422 /
805459 / 805433 / 805450
241 648
(580cm³)
suction kit
N65 DN0
687 055
(430cm³)
Accessories Hydra-Clean®
Part No.
15T 283
15T 280
247 880
Description
Gun Bare (brass)
Extension 10” (SST)
Gun Fitting Kit
15T 282
15T 279
Gun Bare (SST)
Extension 32” (SST)
see Manual: 406 701
Wall unit
Card unit
Dura-Flo sprayer package
Part No.
287 979
287 980
Ratio
23:1
23:1
287 981
32:1
18/02/09
Description
Sprayer, bare
Sprayer, complete
with gun and hose
Sprayer, bare
Manual: 311 164
Lower (size)
222 801 (580cm³)
222 801 (580cm³)
Motor
N65DN0
N65DN0
222 796 (430cm³)
N65DN0
1b - 17
DURA – FLO Air motor & lower ”Stainless Steel”
Dura-Flo 145cm³ - 290cm³
Manual: 311 828
motor: 311 238
lower: 311 827
lower size: 600 (145cm³),
750 (180cm³),
900 (220cm³),
1200 (290cm³)
Pump
Motor & lower
P16DSE
P16ESE
P16LSE
P16MSE
P21DSE
P21ESE
P21LSE
P21MSE
P24DSE
P24ESE
P24LSE
P24MSE
P25DSE
P25ESE
P25LSE
P25MSE
P30DSE
P30ESE
P30LSE
P30MSE
P31DSE
P31ESE
P31LSE
P31MSE
P40DSE
P40ESE
P40LSE
P40MSE
P45DSE
P45ESE
P45LSE
P45MSE
P46DSH
P46ESH
P46LSH
P46MSH
P57LSS
Air - Motor
(Ratio)
∅
16:1
6"
21:1
6"
24:1
6"
25:1
7,5"
30:1
7,5"
31:1
6"
40:1
6"
45:1
10,4"
46:1
7,5"
57:1
10,4"
lower pump
Air pressure
max. 7Bar
Work
Pressure
N22DN0
N22DT0
N22LN0
N22LT0
105
Bar
Max
247192
sst
Dura-Flo
1200
(290cm3)
N22DN0
N22DT0
N22LN0
N22LT0
140
Bar
Max
247190
sst
N22DN0
N22DT0
N22LN0
N22LT0
168
Bar
Max
N34DN0
N34DT0
N34LN0
N34LT0
cylinder
237178
184487
184540
Dura-Flo
900
(220 cm3)
237172
189316
189383
261657
sst
Dura-Flo
750
(180 cm3)
237240
189853
189857
164
Bar
Max
237514
sst
Dura-Flo
1200
(290 cm3)
237178
184487
184540
N34DN0
N34DT0
N34LN0
N34LT0
219
Bar
Max
236470
sst
Dura-Flo
900
(220 cm3)
237172
189316
189383
N22DN0
N22DT0
N22LN0
N22LT0
210
Bar
Max
247168
sst
Dura-Flo
600
(145 cm3)
237234
190172
184503
N34DN0
N34DT0
N34LN0
N34LT0
262
Bar
max
236456
sst
Dura-Flo
750
(180 cm3)
237240
189853
189857
N65DN0
N65DT0
N65LN0
N65LT0
314
Bar
Max
237514
sst
Dura-Flo
1200
(290 cm3)
237178
184487
184540
N34DN0
N34DT0
N34LN0
N34LT0
328
Bar
max
236458
sst
Dura-Flo
600
(145 cm3)
237234
190172
184503
Dura-Flo
900
(220 cm3)
UHMWPE/
PTFE
189316
189383
314
Bar
Max
PTFE / leather
L220SS
sst
*all lowers are SST stainless steel
18/02/09
Repair Kit
spare part
Piston Rod
N65LN0
Number / size
lower
package
1b - 18
237 710
Dura Flo (SST & CS) Air motor & lower
Manual: 311 826
motor: 311 238
lower: 311 825
lower size: 1800 (430cm³),
2400 (580cm³)
Pump
Ratio
Air –
Motor
Motor &
lower
Work
Pressure
Air pressure
max. 7Bar
Lower pump
Repair Kit package
Number / size
P12LCD
P12LSA
P12MCD
P12MSA
P12DCD
P12DSA
P12ECD
P12ESA
P15LCD
P15LSB
P15MCD
P15MSB
P15ESB
P15DCD
P15DSB
P15ECD
P23LCD
P23LSA
P23MCD
P23MSA
P23DCD
P23DSA
P23ECD
P23ESA
P32LCD
P32LSB
P32MCD
P32MSB
P32ESB
P32DCD
P32DSB
P32ECD
∅7,5"
N34LN0
12: 1
(82 Bar)
∅7,5""
N34LT0
∅7,5"
N34DN0
∅7,5"
N34DT0
∅7,5"
15: 1
N34LN0
∅7,5"
(109 Bar)
N34LT0
∅7,5"
N34DN0
∅7,5"
N34DT0
∅10,4
23: 1
N65LN0
∅10,4
(157 Bar)
N65LT0
∅10,4
N65DN0
∅10,4
N65DT0
∅10,4
32: 1
N65LN0
∅10,4
(209 Bar)
N65LT0
∅10,4
N65DN0
∅10,4
N65DT0
222801
222803
222801
222803
222801
222803
222801
222803
222796
687055
222796
687055
687055
222796
687055
222796
222801
222803
222801
222803
222801
222803
222801
222803
222796
687055
222796
687055
687055
222796
687055
222796
Dura-Flo
2400
3
(580 cm )
Dura-Flo
1800
(430 cm3)
Dura-Flo
2400
(580 cm3)
Dura-Flo
1800
(430 cm3)
Lower = CS
Lower= SST
3 PTFE / 2 leather
3 UHMWPE /
2 PTFE
* Standard
* Standard
222879*
222879
222879*
222879
222879*
222879
222879*
222879
222875
222875*
222875
222875*
222875
222875*
222875
222875*
222849*
222849
222848
222848
222849*
222849
222849
222849*
222849
222849*
222848
222848
222848
222848
222848
222848
222879*
222879
222879*
222879
222879*
222879
222879*
222879
222875
222875*
222875
222875*
222875
222875*
222875
222875*
222849*
222849
222849*
222849
222849
222849*
222849
222849*
222848
222848
222848
222848
222848
222848
222848
222848
*CS (Carbon Steel)
*SST (Stainless Steel)
18/02/09
1b - 19
Spare part
Lower = SST
3 UHMWPE /
2 Tuff-Stack
Piston Rod
cylinder
184002
184003
piston
cylinder
184276
184461
piston
cylinder
184002
184003
piston
cylinder
184276
184461
piston
cylinder
* Standard
(no Kit number)*
(no Kit number)*
(no Kit number)*
(no Kit number)*
(no Kit number)*
(no Kit number)*
(no Kit number)*
(no Kit number)*
Dura-Flo 1000cm³ (CS & SST) Air motor & lower
(lower size: 1000cm³)
Pump
Ratio
Air –
Motor
lower pump
motor & lower
Work
Pressure
Air pressure
max. 7Bar
Number / size
P06DCK
P06DSG
P06ECK
P06ESG
P06LCK
P06LSG
P06MCK
P06MSG
P10DCK
∅7,5"
6:1
253597
= 81 Bar
N34DN0
∅7,5""
N34DT0
∅7,5"
N34LN0
253566
= 45,5 bar
P10ECK
∅7,5"
N34LT0
∅10,4
10 : 1
253597
253596
253597
253596
253597
253596
253597
253596
253597
81 Bar
P10MCK
Dura-Flo
N.N
3
(1000cm )
Lower = SST
Lower = CS
PTFE / PTFE
UHMWPE /
Leather
--207 349
--207 349
--207 349
--207 349
---
spare part
Rod
displacement
cylinder
223 439
--223 439
--223 439
--223 439
--223 439
217 478
206 451
217 478
206 451
217478
206 451
217 478
206 451
217 478
181269
166 067
181269
166 067
181269
166 067
181269
166 067
181269
N65DN0
∅10,4
253597
Dura-Flo
---
223 439
217 478
181269
253597
N.N
---
223 439
217478
181269
253597
(1000cm )
---
223 439
217 478
181269
N65DT0
P10LCK
Repair Kit lower
Manual: 311 833
motor: 311 238
lower: 311 717
∅10,4
N65LN0
∅10,4
N65LT0
3
*CS (Carbon Steel)
*SST (Stainless Steel)
=
+
NXT 6500m³
Lower
Dura-Flo
NXT + Lower =
code P xx x x x
18/02/09
1b - 20
Dura-Flo Lower
(145-290cm³) Manual: 311 827
(430-580cm³) Manual: 311 825
(1000cm³)
Manual: 311 833
Rep. kit
Description
Part No
247 168‡
236 458
241 177
L145 SS
236 456
261 657‡
L180 SS
236 470
247 190‡
248 816
236 897
L220 SS
237 514
247 192‡
237 515
236 490
L290 SS
687 055
222 796
L430 CS
L430 SS
L430 SM
247 599
241 648
222 803
222 801
L580CS
L580SS
L580SM
15F289
253 596
253 597
L10XCS
Inlet:
145cm³, 180cm³ :
1- 1/2” npt (f)
220cm³, 290cm³ , 430cm³, 580cm³, 1000cm³ :
2” npt (f)
outlet:
145cm³, 180cm³ :
¾” npt (f)
220cm³, 290cm³ ,
1” npt (f)
430cm³, 580cm³ 1000cm³ :
1-1/2” npt (m)
DF 600 (145cm³) SST (leather/PTFE)
DF 600 (145cm³) SST (UHMWPE/PTFE)
DF 900 (220cm³) SST (Throat UHMWPE / Piston PTFE)
DF 900 (220cm³) SST (PTFE)
DF 1200 (290cm³) SST (leather/UHMWPE)
DF 1200 (290cm³) SST (PTFE)
DF 1800 (430cm³) SST (UHMWPE/Tuff Stack see 311825)
DF 1800 (430cm³) CS (PTFE/leather)
DF 1800 (430cm³) CS (PTFE/UHMWPE)
DF 1800 (430cm³) SST (PTFE/UHMWPE)
DF 2400 (580cm³) SST (UHMWPE/CF-PTFE) Hydra-Clean®
DF 2400 (580cm³) SST (UHMWPE/CF-PTFE) Hydra-Clean®
DF 2400 (580cm³) CS (PTFE/leather)
DF 2400 (580cm³) CS (UHMWPE/PTFE)
DF 1000 (1000cm³) SST (PTFE)
DF 1000 (1000cm³) CS (UHMWPE/leather)
DF 1000 (1000cm³) CS (2xPTFE/4xUHMWPE)
Leather
/
PTFE
gasket
UHMWPE UHMWPE
/
/
Leather
PTFE
* Standard
237 234* 237 238 237 609 237 236
237 234* 237 238 237 609 237 236
237 234
237 238 237 609* 237 236
237 234
237 238 237 609* 237 236
237 240* 237 244 237 608 237 242
237 240* 237 244 237 608 237 242
237 240
237 244 237 608* 237 242
237 172* 237 174 237 710 237 173
237 172* 237 174 237 710 237 173
237 172
237 174 237 710 237 173
237 172
237 174 237 710 237 173*
237 172
237 174 237 710* 237 173
237 178* 237 180 237 713 237 179
237 178* 237 180 237 713 237 179
237 178 237 180* 237 713 237 179
237 178
237 180 237 713 237 179*
237 178
237 180 237 713* 237 179
222 849
222 848 222 845 222 846
222 849* 222 848 222 845 222 846
222 849
222 848 222 845* 222 846
222 849
222 848 222 845* 222 846
222 849 253 744* 222 845 222 846
247 881 UHMWPE/ carbon filled PTFE
222 880 UHMWPE/ carbon filled PTFE
222 879 222 878 222 875* 222 876
222 879* 222 878 222 875 222 876
222 879 222 878 222 875* 222 876
222 879 222 878 222 875* 222 876
222 879 253 745* 222 875 222 876
222 879 222 881* 222 875 222 876
------207 349*
--223 439* 223 443
----223 439* 223 443
---
‡ This lower can be connected only to NXT 2200 size motors.
*CS (Carbon Steel) *SST (Stainless Steel)
253 597 (cs)
Lower
430cm³
580cm³
253 596 (sst)
Lower
1000 cm³
18/02/09
1b - 21
PTFE
Lower
145-290cm³
Accessories: Dura-Flo
247 475
247 476
247 477
247 478
189 920┼
Suction Kit SST 1-½“ in. 5 Gal (19 Liter)
(Lower 145cm³ & 180cm³)
Suction Kit SST 1-½“ in. 55 Gal (200 Liter) (Lower 145cm³ & 180cm³)
Suction Kit SST 2“
in. 5 Gal (19 Liter)
Suction Kit SST 2“
in. 55 Gal (200 Liter)
Strainer SST 1“ , 8 Mesh
247 479
247 480
159 239┼
Kit - Fluid Filter SST inlet ¾“ (incl.167 025 60 Mesh) (Lower 145cm³ & 180cm³)
Kit - Fluid Filter SST inlet 1“(incl. 167 025 60 Mesh)
Adapter ½“ - ⅜“ need for use Kit 247 474 with lower 115cm³
287 884
255 143
247 312
289 279
2 wheels cart, Heavy duty
Bracket mounting
Adapter
Cart Adapter
312 358
307 273
289279 must be used by NXT2200
247 312 must be used by NXT2200
for using 255 143 or 287 884 by NXT2200
312 148
406 677
288 204
Connection Kit - large Dura-Flo (430cm³, 580cm³)
391mm (15,4 inc.)
288 205
Connection Kit - small Dura-Flo (145cm³,180cm³,220cm³,290cm³) 391mm (15,4 inc.)
288 206
Connection Kit 1000cc Dura-Flo (1000cm³)
391mm (15,4 inc.)
┼not shown
Suction Kit
19Liter
247 475
247 477
Heavy Duty
Cart
Connection Kit
200Liter
Filter Kit
288 204
288 205
288 206
247 476
247 478
Adapter plate
3400, 6500
2200, 3400,(6500)
3400
247 479
247 480
Stand
Bracket Mounting
Cart Adapter Kit
247 312
255 143
289 279
253 692
287 884
18/02/09
1b - 22
High - Flo
Manual: High – Flo 311 831
mid range 311 690
II II 2 G
Technical data :
High Flo „mid Range“
Fluid inlet size:
1½” npt (f) /
1½” BSPP
Fluid outlet size:
1“ npt (f)
/
1¼“ BSPP
65,5 ˚ C
High Flo
Fluid inlet size:
2” npt (f)
Fluid outlet size:
2” npt (f)
65,5 ˚ C
“mid Range”
Code: J x x x x x
NXT & Lower =
Code:
Product No.
J
=
J
x
x
x
x
Pump (High-Flo)
C = CS
S = SST
Motor size
20 =
2:1
30 =
3:1
3,3:1
33 =
35 =
3,5:1
40 =
4:1
44 =
4,4:1
45 =
4,5:1
60 =
6:1
18/02/09
x
L
M
R
S
1
2
3
4
5
6
7
1b - 23
=
=
=
=
Motor Type
low noise
Remote
Remote-DataTrak
Connection
=
NPT, SST, Standard
=
NPT, SST, MaxLife (piston & rod)
=
BSPP, SST, Standard
=
BSPP, SST, MaxLife (piston&rod)
=
Tri-clamp SST, Standard
=
Tri-clamp, SST, MaxLife(piston & rod)
=
NPT, CS Standard
Manual: 312 358
Wall Mount Packages
HIGH-FLO®
II II 2 G
All models with
data Track
Low Noise
Air-control NXT011
High-Flo
Package
703 MSN
703 MSB
703 MST
703 SSN
703 SSB
703 SST
704 MSN
704 MSB
704 MST
704 SSN
704 SSB
704 SST
Ratio
3:1
3:1
3:1
3:1
3:1
3:1
4:1
4:1
4:1
4:1
4:1
4:1
Pump
Motor
Lower
JS30M1
JS30M3
JS30M5
JS30S1
JS30S3
JS30S5
JS40M1
JS40M3
JS40M5
JS40S1
JS40S3
JS40S5
N22LT0
N22LT0
N22LT0
N22LT0
N22LT0
N22LT0
N22LT0
N22LT0
N22LT0
N22RT0
N22RT0
N22RT0
253 034
253 085
253 521
253 034
253 085
253 521
253 033
253 423
253 520
253 033
253 423
253 520
Fluid inlet
1-1/2“ NPT
1-1/2“ BSPP
1-1/2” tri-clamp
1-1/2“ NPT
1-1/2“ BSPP
1-1/2” tri-clamp
1-1/2“ NPT
1-1/2“ BSPP
1-1/2” tri-clamp
1-1/2“ NPT
1-1/2“ BSPP
1-1/2” tri-clamp
*all lowers are SST stainless steel
All pumps incl. adapter 15H 060 (1x) and lock/nut 101 566 (4x)
Code:
x
Product No.
1
2
3
4
5
6
7
=
=
=
=
=
=
=
Xtreme (bare)
Xtreme 19 Liter
Xtreme 200 Liter
DuraFlo (bare)
DuraFlo 19 Liter
DuraFlo 200 Liter
High-Flo (bare)
1. 03
1. 04
16
25
=
=
=
=
3:1
4:1
16:1
25:1
x x
x
18/02/09
x
C = CS
S = SST
M
S
Ratio
30
40
45
46
x
=
=
=
=
N
B
T
30:1
40:1
45:1
46:1
1b - 24
=
=
Motor Type
Remote / DataTrak
Connection
=
NPT
=
BSPP, SST, MaxLife (piston & rod)
=
Tri-clamp
HIGH-FLO® Air motor & lower
Manual: 311 831
motor: 311 238
lower: 311 832
3
motor 6500cm
lower 2000cm³ / 3000cm³ / 4000cm³
3,3:1
3,3:1
3,3:1
4,4:1
4,4:1
4,4:1
6:1
6:1
6:1
3,3:1
3,3:1
3,3:1
4,4:1
4,4:1
4,4:1
6:1
6:1
6:1
3,3:1
4,4:1
6:1
3,3:1
4,4:1
6:1
( ∅10,4" )
N65LN0
( ∅10,4" )
N65LT0
(∅10,4" )
N65RN0
(∅10,4" )
N65RT0
High-Flo
lower
243733
243773
243736
243732
243772
243735
243731
243771
243734
243733
243773
243736
243732
243772
243735
243731
243771
243734
243736
243735
243734
243736
243735
243734
2” NPT
CS
Standard
2” NPT
sst
Standard
2” BSPP
sst
Standard
2” NPT
CS
Standard
2” NPT
sst
Standard
2” BSPP
sst
Standard
2” NPT
CS
Standard
2” NPT
sst
Standard
2” BSPP
sst
Standard
2” NPT
CS
Standard
2” NPT
sst
Standard
2” BSPP
sst
Standard
2” NPT
CS
Standard
2” NPT
sst
Standard
2” BSPP
sst
Standard
2” NPT
CS
Standard
2” NPT
sst
Standard
2” BSPP
sst
Standard
2” BSPP
sst
Standard
2” BSPP
sst
Standard
2” BSPP
sst
Standard
2” BSPP
sst
Standard
2” BSPP
sst
Standard
2” BSPP
sst
4000
4000
4000
3000
3000
3000
2000
2000
2000
4000
4000
4000
3000
3000
3000
2000
2000
2000
4000
3000
2000
4000
3000
2000
=
Lower Pump
High-Flo®
NXT & Lower =
Code: J x x x x x
18/02/09
1b - 25
3
per cycle
Standard
+
NXT 6500m³
cm
Material
housing
NXT
Lower
connecting
inlet / outlet
∅ inc
motor &
lower
JC33L1
JS33L1
JS33L3
JC44L1
JS44L1
JS44L3
JC60L1
JS60L1
JS60L3
JC33M1
JS33M1
JS33M3
JC44M1
JS44M1
JS44M3
JC60M1
JS60M1
JS60M3
JS33R3
JS44R3
JS60R3
JS33S3
JS44S3
JS60S3
Motor
piston & cylinder
Ratio
Material
Pump
HIGH-FLO® mid Range - Air motor & lower
253035 Standard
JS20L1
JS20L2
(∅6")
N22LN0
JS20L3
(2:1)
JS20L4
JS20M2
JS20M3
(2:1)
JS20M4
JS20S3
JS20S4
JS30L3
JS30M2
JS30S3
JS30S4
JS35L3
JS35M2
Maxlife
253396
253396
Maxlife
Maxlife
253034 Standard
(∅6")
N22LN0
(3:1)
253569
(∅6")
N22LT0
(3:1)
Maxlife
253085 Standard
253397
Maxlife
253034 Standard
253569
Maxlife
253085 Standard
253397
Maxlife
(∅6")
N22RN0
(3:1)
253085 Standard
(∅6")
N22RT0
(3:1)
253085 Standard
253397
253397
Maxlife
Maxlife
253035 Standard
(∅7,5")
N34LN0
(3,5:1)
JS35L4
JS35M1
253086 Standard
253086 Standard
JS35L1
JS35L2
Maxlife
(∅6")
N22RT0
(2:1)
JS30M4
JS30R4
253570
253086 Standard
JS30M3
JS30R3
Maxlife
(∅6")
N22RN0
(2:1)
JS30L4
JS30M1
253086 Standard
253396
JS30L1
JS30L2
Maxlife
253035 Standard
(∅6")
N22LT0
JS20R4
253570
253396
JS20M1
JS20R3
253570
253086 Standard
253396
(∅7,5")
N34LT0
(3,5:1)
18/02/09
Maxlife
Maxlife
253035 Standard
253570
Maxlife
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
sst 2000
JS35M3
sst 2000
JS35M4
sst 2000
JS35R3
NXT
Ratio
High-Flo
lower
Standard 1½”BSPP
(∅7,5")
N34LT0
(3,5:1)
253086
253396
Maxlife
253086
Standard
sst 2000
(∅7,5")
N34RN0
JS35R4 (3,5:1)
253396
Maxlife
sst 2000
JS35S3
253086
Standard
sst 2000
JS35S4
253096
Maxlife
sst 2000
JS40L1
253033
Standard
253568
Maxlife
253423
Standard
253398
Maxlife
253033
Standard
253568
Maxlife
253423
Standard
sst 2000
JS40L2
sst 2000
JS40L3
sst 2000
JS40L4
sst 2000
JS40M1
(∅7,5")
N34RT0
(3,5:1)
(∅6")
N22LN0
(4:1)
(∅6")
N22LT0
(4:1)
sst 2000
JS40M2
sst 1500
JS40M3
sst 1500
JS40M4
253398
Maxlife
sst 1500
JS40R3
253423
Standard
sst 1500
(∅6")
N22RN0
JS40R4
(4:1)
253398
Maxlife
sst 1500
JS40S3
253423
Standard
sst 1500
JS40S4
253398
Maxlife
sst 1500
JS45L1
253034
Standard
253569
Maxlife
253085
Standard
253397
Maxlife
253034
Standard
253569
Maxlife
253085
Standard
sst 1500
JS45L2
sst 1500
JS45L3
sst 1500
JS45L4
sst 1500
JS45M1
(∅6")
N22RT0
(4:1)
(∅7,5")
N34LN0
(4,5:1)
(∅7,5")
N34LT0
(4,5:1)
sst 1500
JS45M2
sst 2000
JS45M3
sst 2000
JS45M4
253397
Maxlife
sst 2000
JS45R3
253085
Standard
sst 2000
(∅7,5")
N34RN0
JS45R4 (4,5:1)
253397
Maxlife
sst 2000
JS45S3
253085
Standard
sst 2000
JS45S4
253397
Maxlife
1b - 26
(∅7,5")
N34RT0
(4,5:1)
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½“ NPT
1” NPT
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
1½”BSPP
1¼“BSPP
cm3
lower
∅ inc
Lower
housing
lower
Motor
&
Motor
connecting
inlet / outlet
NXT
Ratio
HighFlo
Pump
Material
cylinder &
piston
∅ inc
Lower
cm3
lower
Motor
housing
Motor
&
Manual: 311 211
motor: 311 238
lower: 311 690
3
Material
cylinder &
piston
Pump
3
2200 cm / 3400 cm
1000 cm³ / 1500 cm³ / 2000 cm³
connecting
inlet / outlet
motor
lower
sst
2000
sst
2000
sst
2000
sst
2000
sst
2000
sst
2000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1000
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
sst
1500
HIGH-FLO lower
High-Flo mid range
Manual:
Manual:
311 832
(mid range) 311 690
High-Flo
Accessories
196 321
261 721
247 362
218 742
Adapter inlet / outlet 2” NPT (m) to 2” BSPP (f)
Kit Cup Booster TSL “mid range”
Cover moisture
Stand Mounting – Kit
2” NPT
261 721
Wet cup Kit
“mid range”
247 362
Cover
Moisture
Connection Kit lower pump
288 209
288 208
288 504
288 210
288 202
288 203
2” BSPP
196 321
218 742
Manual 311 876
Air Motor "NXT"
Large mid range High-Flo 1000/1500/2000
“Old “Small mid range High-Flo 750/1000/1500
High-Flo Plus
362 mm (14,25 inc.)
346 mm /13,625 inc.)
(only Piston connect)
362 mm (14,25 inc.)
362 mm (14,25 inc.)
490 mm (19,307 inc.)
2200, 3400
Bulldog/Senator
President
Viscount 1+
2200, 3400
6500
Suction kit 2“ to 1“
Material
Brass - CS - CS -Alu - sst
Brass - SST - SST -Alu - sst
sst – Alu
18/02/09
Bushing
Swivel
102 283
102 806
102 283
504 045
6878110
1b - 27
Hose
Tube
237 522
214 959
214 959
197 682
197 682
197 682
Strainer
(Filter) 8 Mesh
189 920
189 920
189 920
HIGH-FLO Lower
High-Flo mid range
1000 / 1500 / 2000
Manual: 311 832
mid range: 311 690
High-Flo
2000 / 3000 / 4000
piston packing
High-Flo mid range 1000 / 1500 / 2000
Part. No.
253033
253061
253398
253423
253520
253523
253568
253034
253062
253085
253397
253521
253524
253569
253035
253063
253086
253396
253522
253525
253570
Material
housing
size / cycle
(cm3/)
SST
CST
SST
SST
SST
SST
SST
SST
CST
SST
SST
SST
SST
SST
SST
CST
SST
SST
SST
SST
SST
1000
1000
1000
1000
1000
1000
1000
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
Manual: 311 690
Material
Connection
rod piston / cylinder
Chromex/Chrome
Chromex/Nitride
Max-life/Max-Life
Chromex/Chrome
Chromex/Chrome
Max-life/Max-Life
Max-life/Max-Life
Chromex/Chrome
Chromex/Nitride
Chromex/Chrome
Max-life/Max-Life
Chromex/Chrome
Max-life/Max-Life
Max-life/Max-Life
Chromex/Chrome
Chromex/Nitride
Chromex/Chrome
Max-life/Max-Life
Chromex/Chrome
Max-life/Max-Life
Max-life/Max-Life
NPT
NPT
BSPP
BSPP
Tri-Clamp
Tri-Clamp
NPT
NPT
NPT
BSPP
BSPP
Tri-Clamp
Tri-Clamp
NPT
NPT
NPT
BSPP
BSPP
Tri-Clamp
Tri-Clamp
NPT
High-Flo 2000 / 3000 / 4000
Part No.
Material
housing
(size) / cycle
(cm3)
243731
243734
243771
248329
248332
243732
243735
243772
248330
248333
243733
243736
243773
248331
248334
CST
SST
SST
SST
SST
CST
SST
SST
SST
SST
CST
SST
SST
SST
SST
2000
2000
2000
2000
2000
3000
3000
3000
3000
3000
4000
4000
4000
4000
4000
18/02/09
UHMWPE/
UHMWPE
(Standard*)
UHMWPE/
PTFE
(Option)
277360*
277361
277362*
277363
277358*
277359
Manual 311 832
Material
connection
rod piston / cylinder
Plasmacoat / Chrome
Plasmacoat / Chrome
Plasmacoat / Chrome
Chromex/Chrome
Chromex/Chrome
Plasmacoat / Chrome
Plasmacoat / Chrome
Plasmacoat / Chrome
Chromex/Chrome
Chromex/Chrome
Plasmacoat / Chrome
Plasmacoat / Chrome
Plasmacoat / Chrome
Chromex/Chrome
Chromex/Chrome
NPT
BSPP
NPT
BSPP
NPT
NPT
BSPP
NPT
BSPP
NPT
NPT
BSPP
NPT
BSPP
NPT
1b - 28
throat packing
UHMWPE/
leather
(Standard*)
PTFE
leather
(Option)
(Option)
277357* 239866 277356
piston packing
throat packing
UHMWPE/ UHMWPE/ UHMWPE/
UHMWPE
PTFE
leather
(Standard*) (Option) (Standard*)
PTFE
(Option)
243727* 235856
243728*
23588
243729* 235854
243671* 243672
E-Flo Pump
Pump Manual: 311 593
VFD
Manual: 311 596
Motor
VFD
Pump
E
P
x
x
x
x
first digit
second digit
third digit
fourth digit
fifth digit
Electric
Pump
sixth digit
Not
assignet
E
P
Accessory
15J 753
15J 754
15H 873
15H 874
15H 876
15H 877
15J 755
15H 883
15H 880
15H 893
15J 827
15K 012
247 341
288 036
255 216
15J 747 to 15J 752
15H 885
255 225
255 226
15H 886
15H 882
18/02/09
0
1
2
Motor
No motor
230/400 5HP ATEX
230/460 5HP UL/CSA
3
4
230/400 3HP ATEX
230/460 3HP UL/CSA
0
1
Sensor
No circuit
Circuit
sensor
Description
200-240V Variable Frequency Drive
380-480V Variable Frequency Drive
Drive linkage rebuild Kit
Slider cylinder rebuild Kit
Pressure transducer Kit
TDC sensor replacement Kit
Sensor circuit option
Crank arm rebuild Kit
Motor coupler Kit
1
2
3
Lower size
1000cc Chromex
1500cc Chromex
2000cc Chromex
4
5
6
7
1000cc Maxlife
1500cc Maxlife
2000cc Maxlife
750cc Chromex
Manual
311 596
311 598
311 599
311 600
311 601
311 603
311 604
311 605
Pneumatic VFD/BPR control
Slider cylinder collector kit
Power module
Wrist Pin replacement Kit
Pump manifold Kits
Ethernet Upgrade Kit
Electric Motor Kit
311 606
311 607
311 608
311 609
311 611
311 612
311 613
Gear reducer replacement Kit
Slider bearing Kit
311 615
311 616
1b - 29
0
E-Flo Lower
Part No. (BAR)
(L/min)
pressure flow rate
Description
Lower
Lower
2x 1000cm² chromex
2x 2000cm² maxlife
253520
253521
253522
253523
253524
253525
253520
253521
253522
253523
253524
253525
32
24
17
32
24
17
32
24
17
32
24
17
38
57
76
38
57
76
38
57
76
38
57
76
EP3070
EP3170
24
24
28
28
2x 750cm² chromex
289366
EP4170
24
28
2x 750cm² chromex
289366
EP0010
EP0020
EP0030
EP0040
EP0050
EP0060
EP0070
32
24
17
32
24
17
24
38
57
76
38
57
76
28
2x 1000cm² chromex
253520
253521
253522
253523
253524
253525
289366
2x 2000cm² chromex
2x 1000cm² maxlife
2x 1500cm² maxlife
2x 2000cm² maxlife
2x 1000cm² chromex
2x 1500cm² chromex
2x 2000cm² chromex
2x 1000cm² maxlife
2x 1500cm² maxlife
2x 1500cm² chromex
2x 2000cm² chromex
2x 1000cm² maxlife
2x 1500cm² maxlife
2x 2000cm² maxlife
2x 750cm² chromex
Motor
Manual: 311 593
Sensor
(accessory sensor)
Converter
EP1010
EP1020
EP1030
EP1040
EP1050
EP1060
EP1110
EP1120
EP1130
EP1140
EP1150
EP1160
2x 1500cm² chromex
”StainlessSteel”
255226
Adapter
Nut
Pipe
without sensor
4,04 KW
ATEX
288343
289552
2,2 KW ATEX
15H471 15H472 120378
without sensor
288343
15H471
15H472 120378
288343
15H471
15H472 120378
289551
2,2 KW
NON ATEX
without motor
255226
255225
289552
289551
Electric Motor 4 KW 5,5HP 230-400V
Electric Motor 3,6 KW 5 HP 230-460V
Electric Motor 2,2 KW 3HP 230-400V
Electric Motor 2,2 KW 3HP 230-400V
288 117
288 262
288 311
15J 489
288 278
288 414
Material pressure -regulator 1-1/4 “ inlet / outlet npt (f)
fluid max. 21bar
Material pressure -regulator 2 “ inlet / outlet npt (f) sanitary
fluid max. 21bar
Material pressure -regulator 1-1/2 “ inlet / outlet npt (f)
fluid max. 21bar
Repair kit for all material pressure regulators
Gear oil “Total SFGO-220”
1x 0,95 litre
(capacity gear 1,7 litre)
Gear oil “Total SFGO-220” 12x 0,95 litre
ATEX (E-Flo 2000/3000/4000 Pumps)
UL (E-Flo 2000/3000/4000 Pumps)
ATEX (E-Flo 1500 Pumps)
UL (E-Flo 1500 Pumps)
311 613
311 595
Air inlet max. 7 bar
material pressure max. 21 bar
material pressure control max. 17,2 bar
E-Flo lower
E-Flo Pump
motor & lower
18/02/09
1b - 30
Material pressure regulator
288 117
288 262
288 311
Ram Station
CM- Check Mate® Ram
Check Mate® Pump Carbonesteel
GD- Dura Flo Ram
Ball - Pump Stainless Steel
TC- Tandem Ram
with
Check Mate® Pump
TD- Tandem Ram
with
18/02/09
Ball - Pump Stainless Steel
1b - 31
Check- Mate® RAM
Code: CM x x
x
x
Manual: 312 373 Repair
(Pump)
Manual: 312 371 Operation
Digit 3 & 4
Digit
3&4
XX
NXT
2200/
CM100
40:1
NXT
3400/
CM100
63:1
NXT
2200/
CM200
23:1
NXT
3400/
CM200
36:1
11
12
13
14
19
15
16
17
18
21
22
23
24
25
26
27
28
29
2A
2B
2C
2F
2G
2H
2J
P40LCS
P40LCM
P40RCS
P40RCM
P40SCS
P63LCS
P63LCM
P63RCS
P63RCM
P23LCS
P23LCM
P23RCS
P23RCM
P23LSS
P23LSM
P23RSS
P23RSM
P36LCS
P36LCM
P36RCS
P36RCM
P36LSS
P36LSM
P36RSS
P36RSM
NXT
6500/
CM200
68:1
NXT
3400/
CM250
29:1
NXT
6500/
CM250
55:1
Dura-Flo RAM
Code: GD x x
2L
2M
2R
2S
2T
2U
2W
2Y
20
31
32
33
34
35
36
37
38
39
3A
3B
3C
3F
3G
3H
3J
x
P68LCS
P68LCM
P68RCS
P68RCM
P68LSS
P68LSM
P68RSS
P68RSM
P68SCS
P29LCS
P29LCM
P29RCS
P29RCM
P29LSS
P29LSM
P29RSS
P29RSM
P55LCS
P55LCM
P55RCS
P55RCM
P55LSS
P55LSM
P55RSS
P55RSM
Premier
CM250
82:1
NXT
3400/
CM500
14:1
NXT
6500
CM500
26:1
Premier
CM500
39:1
3L
3M
3R
3S
51
52
53
54
55
56
57
58
59
5A
5B
5C
5F
5G
5H
5L
5M
5R
5S
P82LCS
P82LCM
P82LSS
P82LSM
P51LCS
P51LCM
P51RCS
P51RCM
P51LSS
P51LSM
P51RSS
P51RSM
P26LCS
P26LCM
P26RCS
P26RCM
P26LSS
P26LSM
P26RSS
P39LCS
P39LCM
P39LSS
P39LSM
SST & CS
x
(Pump)
Digit 3 & 4
Digit
3&4
NXT2200
DF145SS
31:1
NTX3400
DF145SS
46:1
NXT3400
DF180SS
40:1
XX
NXT3400
DF220SS
30:1
NXT6500
DF220SS
57:1
NXT6500
DF290SS
45:1
Premier
DF290SS
67:1
NXT3400
DF430CS
15:1
18/02/09
A1
A2
A3
A4
11
12
13
14
15
16
17
18
21
22
23
24
2A
2B
2C
2D
31
32
33
34
3L
3M
3R
3S
41
42
43
44
P31LSS
P31LSM
P31HSS
P31MSH
P46LSS
P46LSM
P46HSS
P46MSH
P40LSS
P40LSM
P40HSS
P40MSH
P30LSS
P30LSM
P30HSS
P30MSH
P57LSS
P57LSM
P57HSS
P57MSH
P45LSS
P45LSM
P45HSS
P45MSH
P67LSS
P67LSM
P67HSS
P67MSH
P15LCS
P15LCM
P15HCS
P15HCM
NXT3400
DF430SS
15:1
NTX6500
DF430CS
32:1
NXT6500
DF430SS
32:1
Premier
DF430
44:1
NXT3400
DF580CS
12:1
NXT3400
DF580SS
12:1
NXT6500
DF580CS
22:1
NXT6500
DF580SS
22:1
45
46
47
48
49
4A
4B
4C
4F
4G
4H
4J
4L
4M
4R
4S
51
52
53
54
55
56
57
58
59
5A
5B
5C
5F
5G
5H
5J
P15LSS
P15LSM
P15HSS
P15MSH
P32LCS
P32LCM
P32HCS
P32HCM
P32LSS
P32LSM
P32HSS
P32MSH
P44LSS
P44LSM
P44LCS
P44LCM
P12LCS
P12LCM
P12HCS
P12HCM
P12LSS
P12LSM
P12HSS
P12MSH
P22LCS
P22LCM
P22HCS
P22HCM
P22LSS
P22LSM
P22HSS
P22MSH
1b - 32
Premier
DF580
34:1
NTX3400
DF1000CS
6:1
NXT3400
DF1000SS
6:1
NXT6500
DF1000CS
10:1
NXT6500
DF1000SS
10:1
Premier
DF1000SS
5L
5M
5H
5J
O1
O2
O3
O4
O5
O6
O7
O8
O9
0A
0B
0C
0F
0G
0H
0J
0L
0M
0R
0S
P34LSS
P34LSM
P34LCS
P34LCM
P06LCS
P06LCM
P06HCS
P06HCM
P06LSS
P06LSM
P06HSS
P06MSH
P10LCS
P10LCM
P10LCS
P10LCM
P10LSS
P10LSM
P10HSS
P10MSH
NR
NR
NR
NR
Check- Mate® & DuraFlo RAM
Code: CM or GD x x
x
x
Digit 5
Digit 6
Ram Stand
Digit
5
x
2
3
4
5
6
7
8
9
A
B
C
F
G
H
J
Style
Size
Voltage
Data Trak
S20C (255764)
S20
(237788)
D30 (255763)
D200 (255648)
D200i (255288)
D200s (255688)
D200si (255291)
D200 (255640)
D200i (255641)
D200 (255642)
D200i (255643)
D200s (255644)
D200si (255645)
D200s (255646)
D200si (255647)
3”
3”
3”
3”
3”
6,5”
6,5”
3”
3”
3”
3”
6,5”
6,5”
6,5”
6,5”
------no volt
no volt
no volt
no volt
24 Vdc
24 Vdc
100-240 VAC
100-240 VAC
24 Vdc
24 Vdc
100-240 VAC
100-240 VAC
Air Control
Standard
Standard
Standard
INT
2 button interlock
INT
2 button interlock
INT
2 button interlock
INT
2 button interlock
INT
2 button interlock
INT
2 button interlock
D200
D30
Ram Follower Plate
Plate
Digit
6
x
1
2
3
4
5
6
7
8
9
A
20L (255655)
20L (255656)
20L (255657)
20L (255658)
20L (255659)
30L (255660)
115L (255661)
200L (255662)
200L (255663)
200L (255664)
Style
wiper
Flat
Flat
Flat
Flat
Round
Flat
D
PTFE
Standard
Standard
Pump inlet
(mm)
Small 64,58
Large 89,30
Small 64,58
Large 89,30
Large 89,30
Seal Material
Buna-N
Buna-N
PTFE
PTFE
Buna-N
Buna-N (255654)
EPDM (255654)
EPDM (255653)
EPDM (255653)
Neoprene(255653)
S20
SinglePost
Wiper for follower plate
Part No.
255655 / 255656
255657 / 255658
255659
255660
255661
255662 / 255663
255664
flat
description
5 Gal (20 Liter)
5 Gal (20 Liter)
5 Gal (20 Liter)
9 Gal (30 Liter)
30 Gal (115Liter)
55 Gal (200Liter)
55 Gal (200Liter)
Wiper (upper)
Wiper (lower)
184420 (flat) Buna-N
184421(flat)Buna-N
276049 (flat) PTFE
184552 (flat)PTFE
15W597 (round) PVC
--194146 (flat) Buna-N
194147(flat)Buna-N
Kit 255654 = (2 x Wiper) round EPDM
Kit 255653 = (2 x Wiper) EDPM
Kit 255652 = (2 x Wiper) Neoprene
Worm gear
----C31154
-------
round
standard
error code
E1
E2
E4
E5
E7
leakage upstroke
leakage down stroke
Solenoid disconnect
Reed contact disconnect or damage
Drum Empty
18/02/09
1b - 33
S20C
Cart
Tandem Supply Systems®
Code: TC x x
Code: TD x x
x
x
x
x
Digit 3 &4
with Check - Mate displacement pump
with Dura - Flo displacement pump
Digit 6
Digit 5
Digit
3&4
XX
Digit
3&4
XX
11
P40LCS
NXT
12
P40LCM
2200/
NXT
13
P40RCS
CM100
6500/
14
P40RCM
40:1
CM200
19
P40SCS
68:1
NXT
15
P63LCS
3400/
16
P63LCM
CM100
17
P63RCS
63:1
18
P63RCM
21
P23LCS
22
P23LCM
NXT
23
P23RCS
NXT
2200/
24
P23RCM
CM200
3400/
25
P23LSS
23:1
CM250
26
P23LSM
29:1
27
P23RSS
28
P23RSM
29
P36LCS
2A
P36LCM
NXT
NXT
2B
P36RCS
3400/
6500/
2C
P36RCM
CM200
CM250
2F
P36LSS
36:1
55:1
2G
P36LSM
2H
P36RSS
2J
P36RSM
NXT2200
A1
P31LSS
DF145SS
A2
P31LSM
31:1
A3
P31HSS
A4
P31MSH
NTX3400
11
P46LSS
DF145SS
12
P46LSM
46:1
13
P46HSS
14
P46MSH
NXT3400
15
P40LSS
DF180SS
16
P40LSM
40:1
17
P40HSS
18
P40MSH
NXT3400
21
P30LSS
DF220SS
22
P30LSM
30:1
23
P30HSS
24
P30MSH
NXT6500
2A
P57LSS
DF220SS
2B
P57LSM
57:1
2C
P57HSS
2D
P57MSH
NXT6500
31
P45LSS
DF290SS
32
P45LSM
45:1
33
P45HSS
34
P45MSH
Premier
3L
P67LSS
DF290SS
3M
P67LSM
67:1
3R
P67HSS
3S
P67MSH
NXT3400
41
P15LCS
DF430CS
42
P15LCM
15:1
43
P15HCS
44
P15HCM
18/02/09
NXT3400
DF430SS
15:1
NTX6500
DF430CS
32:1
NXT6500
DF430SS
32:1
Premier
DF430
44:1
NXT3400
DF580CS
12:1
NXT3400
DF580SS
12:1
NXT6500
DF580CS
22:1
NXT6500
DF580SS
22:1
2L
2M
2R
2S
2T
2U
2W
2Y
20
31
32
33
34
35
36
37
38
39
3A
3B
3C
3F
3G
3H
3J
45
46
47
48
49
4A
4B
4C
4F
4G
4H
4J
4L
4M
4R
4S
51
52
53
54
55
56
57
58
59
4A
5B
5C
5F
5G
5H
5J
P68LCS
P68LCM
P68RCS
P68RCM
P68LSS
P68LSM
P68RSS
P68RSM
P68SCS
P29LCS
P29LCM
P29RCS
P29RCM
P29LSS
P29LSM
P29RSS
P29RSM
P55LCS
P55LCM
P55RCS
P55RCM
P55LSS
P55LSM
P55RSS
P55RSM
P15LSS
P15LSM
P15HSS
P15MSH
P32LCS
P32LCM
P32HCS
P32HCM
P32LSS
P32LSM
P32HSS
P32MSH
P44LSS
P44LSM
P44LCS
P44LCM
P12LCS
P12LCM
P12HCS
P12HCM
P12LSS
P12LSM
P12HSS
P12MSH
P22LCS
P22LCM
P22HCS
P22HCM
P22LSS
P22LSM
P22HSS
P22MSH
1b - 34
Premier
CM250
82:1
NXT
3400/
CM500
14:1
NXT
6500
CM500
26:1
Premier
CM500
39:1
Premier
DF580
34:1
NTX3400
DF1000CS
6:1
NXT3400
DF1000SS
6:1
NXT6500
DF1000CS
10:1
NXT6500
DF1000SS
10:1
Premier
DF1000SS
3L
3M
3R
3S
51
52
53
54
55
56
57
58
59
5A
5B
5C
5F
5G
5H
5L
5M
5R
5S
P82LCS
P82LCM
P82LSS
P82LSM
P51LCS
P51LCM
P51RCS
P51RCM
P51LSS
P51LSM
P51RSS
P51RSM
P26LCS
P26LCM
P26RCS
P26RCM
P26LSS
P26LSM
P26RSS
P39LCS
P39LCM
P39LSS
P39LSM
5L
5M
5H
5J
O1
O2
O3
O4
O5
O6
O7
O8
O9
0A
0B
0C
0F
0G
0H
0J
0L
0M
0R
0S
P34LSS
P34LSM
P34LCS
P34LCM
P06LCS
P06LCM
P06HCS
P06HCM
P06LSS
P06LSM
P06HSS
P06MSH
P10LCS
P10LCM
P10LCS
P10LCM
P10LSS
P10LSM
P10HSS
P10MSH
NR
NR
NR
NR
Tandem Supply Systems®
Code: TC x x
Code: TD x x
fifth Digit:
Electronic Crossover
(Smart Motors only)
1
√
2
√
3
√
4
√
5
√
6
√
7
8
P
Sixth Digit:
Platen Size
4
A
B
C
F
G
H
J
L
M
R
S
T
30G (114Liter)
55G (208Liter)
x
x
x
x
Pneumatic Crossover
(Standard Motors only)
Fluid
Filter
√
√
√
Carbon
Steel
√
SST
√
√
√
√
√
Plate Style
D = 90° D Style
P = PTFE
P = PTFE
P = PTFE
P = PTFE
P = PTFE
P = PTFE
N = Non PTFE
N = Non PTFE
N = Non PTFE
N = Non PTFE
N = Non PTFE
N = Non PTFE
Wiper
Material
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
EPDM
Ram
Size
n/a
n/a
n/a
n/a
n/a
n/a
D200 (3”)
D200S (6,5”)
Ram Code
D200, 0V
D200, 0V
D200, Vac
D200, Vdc
D200S, 0V
D200S, Vac
D200S, Vdc
D200, 0V
D200, Vac
D200, Vdc
D200S, 0V
D200S, Vac
D200S, Vdc
Description “Ram Code”
D200, 0V = 3” no volt
D200S 0V = 6,5” no volt
D200 Vdc = 3” 24Vdc
D200 Vac = 3” 100-240Vac
D200S Vdc = 6,5” 24Vdc
D200S Vac = 6,5” 100-240Vac
Accessories:
Part No.
255 706
255 707
255 759
255 760
255 708
255 709
255 649
15M293
255 675
255 676
247 504
255 457
255 458
Description
Electronic Crossover Kit with display Vac
3” Ram
Electronic Crossover Kit with display Vac 6,5” Ram
Electronic Crossover Kit with display Vdc
3” Ram
Electronic Crossover Kit with display Vdc 6,5” Ram
Electronic Crossover Kit without display
3” Ram
Electronic Crossover Kit without display
6,5” Ram
Power Supply 24Vdc
Power Supply 100 - 230Vac (121 261 Fuse 250V 1,2A)
Pneumatic Crossover Kit
3” Ram
Pneumatic Crossover Kit
6,5” Ram
Fluid Filter Kit, used with electr. crossover models only
Depressurization Kit CS
Depressurization Kit SST
Pump Outlet Check Valve Kits
255 452
CM 100 CS
255 455
CM 500 CS
Manual 312 400
255 453
CM 200 & 250 CS
255 456
CM 50 SST
Communications Gateway Module
Manual 313 138
CGK 010
Communications Gateway Module Instalatiotion Kit
CGM DN0
DeviceNet Gateway Module for CGK 010
CGM EP0
EtherNet/IP Gateway Module for CGK 010
CGM PB0
PROFIBUS Gateway Module for CGK 010
CGM PN0
PROFINET Gateway Module for CGK 010
18/02/09
1b - 35
Manual
312 373
312 400
255 454
256 882
CM 200 & 250 SST
DuraFlo 430&580
Check-Mate® Pump
Air motor & lower
Manual: 312 376
Technical data:
Manual:
312 376
NXT
Air inlet size:
Max speed:
Max Operating
temperature:
Product No.
P =
xx
x
x
x
Pump (Check-Mate)
Motor size
14:1
14 =
23:1
23 =
26:1
26 =
29 =
29:1
36:1
36 =
39:1
39 =
40:1
40 =
55:1
55 =
63 =
63:1
68:1
68 =
82 =
82:1
18/02/09
P
¾” npt(f)
60cpm
L
R
S
Premier /500cm³ Lower
2200cm³Motor / 100cm³ Lower C
6500cm³Motor / 250cm³ Lower S
S
M
=
=
=
Motor Type
low noise
low noise/ DataTrak
Low noise/ high level
sensor
Pump Material
=
Carbon Steel
=
Stainless Steel
=
=
1b - 36
Option
Severe Duty
MaxLife
Premier
1” npsm
50cpm
82˚ C
Check-Mate® Pump
Air motor & lower
Pump
Ratio
Air - Motor
∅
Motor
&
lower
P14LCS
P14LCM
P14LSS
P14LSM
P14RCS
P14RCM
P14RSS
P14RSM
P23LCS
P23LCM
P23LSS
P23LSM
P23RCS
P23RCM
P23RSS
P23RSM
P26LCS
P26LCM
P26LSS
P26LSM
P26RCS
P26RCM
P26RSS
P26RSM
P29LCS
P29LCM
P29LSS
P29LSM
P29RCS
P29RCM
P29RSS
P29RSM
P36LCS
P36LCM
P36LSS
P36LSM
P36RCS
P36RCM
P36RSS
P36RSM
14:1
7,5”
N34LR0
N22LN0
23:1
6"
N22LR0
N65LN0
26:1
10,4 "
N65LR0
N34LN0
29:1
7,5"
N34LR0
N34LN0
36:1
7,5"
N34LR0
Connection parts:
Pump
Rod Tie
(3x)
P14 / P26
P29/36/40/55/63/65
P23
P39
P82
15M222
18/02/09
motor: 311 238
lower: 312 375
Lower
Pump
Motor
&
lower
Motor
&
lower
L500CS
L500CM
L500SS*
L500SM*
L500CS
L500CM
L500SS*
L500SM*
P39LCS
P39LCM
P39LSS
P39LSM
P40LCS
P40LCM
P40RCS
P40RCM
P40SCS
P55LCS
P55LCM
P55LSS
P55LSM
P55RCS
P55RCM
P55RSS
P55RSM
P63LCS
P63LCM
P63RCS
P63RCM
P68LCS
P68LCM
P68LSS
P68LSM
P68RCS
P68RCM
P68RSS
P68RSM
P68SCS
P82LCS
P82LCM
P82LSS
P82LSM
Air inlet
pressure
max. 7bar
N34LN0
Manual: 312 376
L200CS
L200CM
L200SS*
L200SM*
L200CS
L200CM
L200SS*
L200SM*
L500CS
L500CM
L500SS*
L500SM*
L500CS
L500CM
L500SS
L500SM
L250CS
L250CM
L250SS*
L250SM*
L250CS
L250CM
L250SS*
L250SM*
L200CS
L200CM
L200SS*
L200SM*
L200CS
L200CM
L200SS*
L200SM*
Adapter
Coupling
15K750
15H370
184129
15K750
15H392
244819
15M619
15H392
244819
184381
15H370
184129
184381
15H392
244819
Bracket adapter (NXT 2200)
Ratio
Air - Motor
∅
39:1
Lower
Air inlet
pressure
max. 7bar
Motor
&
lower
Premier
222800
L500CS
L500CM
L500SS*
L500SM*
L100CS
L100CM
L100CS
L100CM
L100CS
L250CS
L250CM
L250SS*
L250SM*
L250CS
L250CM
L250SS*
L250SM*
L100CS
L100CM
L100CS
L100CM
L200CS
L200CM
L200SS*
L200SM*
L200CS
L200CM
L200SS*
L200SM*
L100CS
L250CS
L250CM
L250SS*
L250SM*
N22LN0
40:1
6"
N22LR0
N22LH0
N65LN0
55:1
10,4 "
N65LR0
N34LN0
63:1
7,5"
N34LR0
N65LN0
68:1
7,5"
N65LR0
N65LH0
82:1
Premier
222800
* SST –Stainless Steel
Cover
186925
197340
197340
186925
197340
Clip
244820
244820
244820
1b - 37
Coupler
------15M631
15M631
Washer
(3x)
108098
108098
108098
108098
108098
Nut
(3x)
106166
106166
106166
106166
106166
Plug
120588
120588
120588
120588
120588
DuraFlo® Pump
Air motor & lower
Manual: 311 828 / 311 826 / 311833
Technical data:
Manual:
311 828 (145cc-290cc)
311 826 (430cc-580cc)
311 833 (1000cc)
NXT
Air inlet size:
Max speed:
Max Operating
temperature:
Product No.
P =
xx
x
x
x
Pump (DuraFlo)
Motor size
.06 =
06:1
10 =
10:1
12 =
12:1
15 =
15:1
22 =
22:1
30 =
30:1
31 =
31:1
32 =
32:1
34 =
34:1
40 =
40:1
44:1
44 =
45 =
45:1
46 =
46:1
57 =
57:1
67
67:1
18/02/09
P
Motor Typ
3400cm³Motor / 1000cm³ Lower D = De-icing
6500cm³Motor / 1000cm³ Lower E = De-icing/DataTrak
L = low noise
M = low noise/DataTrak
H = Sensor
Pump Material
C =
Carbon Steel
S =
Stainless Steel
Option
S = Severe Duty
6500cm³Motor / 290cm³ Lower E = 4leather/1PTFE
3400cm³Motor / 145cm³ Lower H = PTFE leather
1b - 38
¾” npt(f)
60cpm
Premier
1” npsm
50cpm
82˚ C
Dura Flo Pump
Air motor & lower
Pump
Ratio
∅ Air - Motor
P06DSG
N34DN0
P06DCK
P06ESG
N34DT0
6:1
7,5”
P06ECK
P06LSG
N34LN0
P06LCK 1000cc
P06MSG
N34LT0
P06MCK
P10DCK
N65DN0
P10ECK
N65DT0
P10LCK 10:1 10,4 " N65LN0
P10MCK
N65LT0
P10LCS 1000cc
N65NL0
P12LCD
N34LN0
P12LSA
P12MCD
N34LT0
P12MSA
P12DSA
N34DN0
P12ESA
N34DT0
P12MSH
N34LH0
P12DCD 12:1
N34DN0
P12HSS
N34LH0
580cc
P12ECD
N34DT0
P12LSM
N34LN0
P12LSS
P12MSH
N34LH0
P12HSS
P15LCD
N34LN0
7,5”
P15LSB
P15MCD
N34LT0
P15MSB
P15DSB
N34DT0
P15ESB
N34DN0
P15MSH 15:1
N34LH0
P15DCD
N34DN0
430cc
P15HSS
N34LH0
P15ECD
N34DT0
P15LSM
P15LSS
P22MSH
N65LH0
22:1
P22HSS
10,4 "
P22LCS
N65LN0
P22LSM 580cc
P22LSS
P30DSE
N34DN0
P30HSS 30:1
N34LH0
7,5”
P30ESE
N34DT0
P30LSS 220cc
N34LN0
P30LSE
N34LN0
N34LT0
P30MSE
Connection parts:
Pump
P06/10/12/15/22/32
P30/31/40/45/46
Viscount (222796+222805
+222801+222803)
Viscount (236470+248816)
Premiere P34/P44
Premier P67
18/02/09
Rod Tie
(3x)
15H562
15H562
185596
184596
617464
C59708
Manual: 311 828 / 311 826 / 311 833
NXT motor: 311 238
Premier motor: 308 213
Lower
253596
235597
253596
235597
253596
235597
253596
235597
235597
235597
235597
235597
L10XCS
222801
222803
222801
222803
222803
222803
L580SM
222801
L580SS
222801
L580SM
L580SS
L580SM
L580SS
222796
687055
222796
687055
687055
687055
L430SM
222796
L430SS
222796
L430SM
L430SS
L580SM
L580SS
L580CS
L580SM
L580SS
236470
L220SS
236470
L220SS
236470
236470
Adapter
Pump
P31DSH
P31HSS
P31ESH
P31LSS
P31LSH
P31MSH
P32DCD
D32ECD
P32MSH
P32LCD
P32HSS
P32LSB
P32LSM
P32DSB
P32LSS
P32ESB
P32MCD
P32MSB
P34LSS
P34LSM
P34LCS
P34LCM
P40DSE
P40ESE
P40LSE
P40MSE
P44LSS
P44LSM
P44LCS
P44LCM
P45DSE
P45ESE
P45LSE
P45MSE
P46DSH
P46HSS
P46ESH
P46LSS
P46LSH
P46MSH
P57LSS
P57LSM
P57HSS
P57MSH
P67LSS
P67LSM
P67HSS
P67MSH
237290
248817
222892
222897
222834
222900
Ratio
31:1
∅ Air - Motor
N22DN0
N22LH0
6”
N22DT0
N22LN0
145cc
32:1
10,4 "
N22LT0
N65DN0
N65DT0
N65LH0
N65LN0
N65LH0
N65LN0
N65DN0
N65LN0
N65DT0
N65LT0
430cc
Lower
247168
L145SS
247168
L145SS
247168
247168
222796
222796
L430SM
222796
L430SS
687055
L430SM
687055
L430SS
687055
222796
687055
L580SS
Premier
222800
34:1
580cc
40:1
7,5”
180cc
44:1
N34DN0
N34DT0
N34LN0
N34LT0
236456
236456
236456
236456
L430SS
Premier
222800
430cc
45:1
10,4 "
46:1
7,5”
N65DN0
N65DT0
N65LN0
N65LT0
N34DN0
N34LH0
N34DT0
N34LN0
145cc
N34LT0
N65LN0
57:1
237514
237514
237514
237514
236458
L145SS
236458
L145SS
236458
236458
L220SS
10,4 "
220cc
L290SS
67:1
Premier
222800
290cc
3,5:1
Viscount
235345
15H371
15H370
184595
Collar
(2x)
184130
184129
184130
Nut
coupling
184096
186925
184096
Nut
(3x)
101712
101712
106166
190287
617463
C59707
184129
184130
184129
186925
184096
184098
106166
106166
106166
1b - 39
Plug
120588
236470
248816
222796
222805
222801
222803
Wrench
184278
184278
112887
Check-Mate® Lowers
Manual: 312 375
We cannot mount the new Check-Mate lower on old air motors. The tie rod length is different, as is the coupling style
Technical data:
C H E C K-M A T E
L100 _ _
L200_ _ & 250_
Product No.
Fluid outlet size:
L100 = ¾” NPT (m)
L200 = 1” NPT (f)
L250 = 1” NPT (f)
L500 = 1-1/2” NPT (m)
Max Fluid Pressure:
100cm³
441 bar 6396 psi
200cm³
434 bar 6295 psi
250cm³
434 bar 6295 psi
500cm³
273 bar 3960 psi
CM 800
Maximum Operating
80˚ C
temperature:
L500_ _
L
x
x
x
x
x
C = Carbon steel
S = Stainless steel
L
=
Lower Xtreme
Motor size
100
=
200
=
=
250
=
500
S
M
100cm³ lower
200cm³ lower
250cm³ lower
=
=
option
Severe Duty
Max Life
500cm³ lower
Check-Mate ™ 800 Lowers
(193cm³)
Manual: 308 570
Technical data:
C H E C K-M A T E
Fluid outlet size:
Max Fluid Pressure:
Maximum Operating
temperature:
Part No.
253141
237795
237885
Description
200 Litre Drum size Carbon Fibre PTFE
200 Litre Drum size
19 Litre Pail size
CM 800
18/02/09
CM800 = 1” NPT (f)
403bar 5850 psi
200˚ C
1b - 40
Check-Mate® Lowers
Item
Manual: 312 375
Several duty
ALL
UHMWPE
/ PTFE
UHMWPE
/ PTFE /
PTFE glass filled
maxlife
Piston rod
(rep-Kit)
Cylinder
(rep-Kit)
Brown oil filled UHMWPE
Part No.
L100CS
L100CM
L200CS
L200CM
L200SS
L200SM
L250CS
L250CM
L250SS
L250SM
L500CS
L500CM
L500SS
L500SM
Capacity
/ Cycle
100cm³/DH
100cm³/DH
200cm³/DH
200cm³/DH
200cm³/DH
200cm³/DH
250cm³/DH
250cm³/DH
250cm³/DH
250cm³/DH
500cm³/DH
500cm³/DH
500cm³/DH
500cm³/DH
Material
A) Throat
B) Piston
complete
Seal kit
Seal Kit
A+B
CS
255523
255533
255507
255569
CS
255524
255533
255508
255570
CS
255525
255534
255509
255571
CS
255527
255534
255510
255572
SST*
255526
255534
255511
255571
SST*
255527
255534
255512
255572
CS
255528
255536
255513
255573
CS
255530
255536
255514
255574
SST*
255529
255536
255515
255573
SST*
255530
255536
255516
255574
CS
255531
255538
255517
255575
CS
255532
255538
255518
255575
SST*
235531
255538
255519
255575
SST*
235532
255538
255520
255575
There is no connection kit to the fit the old air motor to the new lower !!!
255591
255592
255593
255594
255595
255596
255597
255598
255599
255600
255601
255602
255601
255602
* SST –Stainless Steel
Check-Mate® 800 Lowers
Part No.
253141
237795
237885
C03510
Capacity
/ Cycle
Material
(193cm³)
Throat
Seal kit
193cm³/cycle
CS
253545
193cm³/cycle
CS
241782
193cm³/cycle
CS
241782
Connection kit Air motor Senator / Bulldog / King
18/02/09
Manual: 308 570
Repair Kit
Shovel
Intake Valve
Piston rod
(repair kit)
Cylinder
(repair kit)
237909
237909
237910
235546
237507
237907
189317
189317
189317
190586
190586
190608
1b - 41
RAM Accessories
198 347
245 131
190 737
237 960
190 166
237 782
Montage adapter for 1-1/4”NPT(f) (64mm), Xtreme lower
Floor Stand Accessory for Xtreme – Pumps (incl. adapter 198 347)
Montage adapter for 1-1/2”NPT(m) (64mm), Dura - Flo™ 145cm³, 180cm³
Floor Stand Accessory for Dura Flo 145-180cm³ – Pumps (incl. adapter 190 737)
Montage adapter for 2”NPT(m)
(64mm), Dura - Flo™ 220cm³, 290cm³
Floor Stand Accessory for Dura Flo 220-290cm³ – Pumps (incl. adapter 190 166)
255 392
Montage kit for CM-Lower to 55 Gal. follower plate 255 664
255 393
Montage adapter for 20 – 30 liter follower plate (64,58mm – 89,30mm)
406 513
406 305
406 297
(4x screw 102637 4x clamp 276 025 1x O-Ring 109495)
Are used if mounting 255659 (Plate 20L) with 100cc displ. pump
255 316
255 317
Kit mounting NXT65 or NXT34
Kit mounting NXT22
(on bracket)
(on bracket)
in 6,5” Ram 200 liter
in 6,5” Ram 200 liter
255 308
255 309
Kit mounting NXT65 or NXT34
Kit mounting NXT22
(on bracket)
(on bracket)
in 3” Ram 200 liter
in 3” Ram 200 liter
255 305
256 235
Kit mounting NXT CM
Kit mounting NXT- DuraFlo™
(on follower plate) in 3” Ram 200 liter
(on follower plate) in 3” Ram 200 liter
255 315
255 306
Kit mounting NXT CM
Kit mounting Premier DuraFlo™
(on follower plate) in 6,5” Ram 200 liter
(on follower plate) in 6,5” Ram 200 liter
255 477
206 537
C32 463
918 395
918 397
255 719
255 720
255 627
121 264
15M293
121 226
255 704
255 705
255 757
255 758
255 415
255 467
15M 804
212 135
119 700
255 703
Kit Drum Stop (not shown) 2 stop / 2 washer/ 2 screws
Drum Clamps for D200
3” Ram (contain 2 pieces)
Drum Clamps for D200S 6,5” Ram (contain only one clamp !!!) order 2 pieces !!!
Drum clamp Heavy Duty only for 6,5” Ram
Drum clamp shell only for 6,5” Ram
Two button interlock Control Kit D200
3” Ram (Gauge 101 689)
Two button interlock Control Kit D200 S
6,5” Ram (Gauge 101 689)
Drum roller kit for D200 & D200S
Air – Switch Roller
Power Supply 24VDC, 2,5A, 60W (121 261 Fuse 250V 1,2A)
Cable 0,4m (Power supply 24VDC to remote DataTrak) (not shown)
DataTrak Accessory Kit 230V AC 3” RAM
DataTrak Accessory Kit 230V AC 6,5” RAM
DataTrak Accessory Kit 24V DC 3” RAM
DataTrak Accessory Kit 24V DC 6,5” RAM
Remote DataTrak
Light Tower Kit (not shown)
Initiator “Low Level” Drum
Air Solenoid (not shown)
Reed sensor NXT Motor (not shown)
Kit enclose wetcup recirculation
Screw 102 637
4x Clamp
276 025
Ball Valve 208 390
Pump intake
198 347 (Xtreme)
190 737 (DF145-180cm³)
190 166 (DF220-290cm³)
109 495 (Xtreme & DF)
(184 086 for CM)
(not included)
222 274 Flor Stand
outlet 3” NPT
(not included)
18/02/09
245 131
237 960
237 782
1b - 42
255 392
255 393
312 373
312 373
312 373
312 374
312 374
312 492
312 374
312 373
312 373
312 373
312 373
312 373
312 373
312 373
312 493
312 373
312 373
312 373
312 494
RAM Accessories
Pump mounting on follower plate
Pump NXT mounting on bracket
Premier mounting on bracket
Drum Clamp
C32 463
255 315
255 305
256 235
255 316
255 317
255 308
255 309
206 537
255 306
918 395
918 397
121 264
255 719
255 720
255 704
255 705
255 757
255 758
255 415
15M 804
255 627
255 691
18/02/09
1b - 43
255 703
VISCOUNT (1)
Viscount I
236 601
236 602
236 605
236 606
236 712
236 713
218 077
Motor
221 080
6710 990
238 349
236 417
217 222
223 646
Viscount II
Dura-Flo
High-Flo
210 313
243 740
243 751
243 752
243 741
248 343
248 344
243 742
248 345
243 346
05/08/08
Xtreme
222 892
222 897
222 834
222 900
245 168
2-1
High-Flo
247 355
247 356
247 357
247 358
247 359
247 360
247 361
Dura-Flo
237 290
248 817
VISCOUNT (1)
Part-No.
Description: Viscount I Lower
236 601
236 602
236 605
236 606
236 712
236 713
217 222*
236 417*
218 077
6710 990
238 349
221 080
Viscount I Plus, 31 bar,
Viscount I Plus, 15,5 bar,
Viscount I Plus, 15,5 bar,
Viscount I, Motor 69 bar,
Viscount I, Motor 103 bar,
Viscount I 1000, short,
Manual
Lower 239 833, 450 HF, CS,
Lower 239 836, 450 HF, SST,
Lower 239 834, 300 HF, CS,
Lower 239 837, 300 HF, SST,
Lower 239 835, 225 HF, CS,
Lower 239 838, 225 HF, SST,
Bare motor
With base for Viscount I Plus pumps
Lower 224 344, SST
Lower 217 529,CS
Lower 238 348, SST, Road Lazer
Lower 223 587, CS
Manual
(308793)
(308793)
(308793)
(308793)
(308793)
(308793)
Transfer
Transfer
Transfer
Transfer
Transfer
Transfer
(308 117)
(306 936)
(308 650)
(306 981)
Cleaning
Airless
Transfer
Airless
308 793
308 793
308 793
308 793
308 793
308 793
307 654
308 330
307 622
6000 161
308 674
307 623
* = oil requirement per double stroke 0,195 l - oil pressure up to max. 69 bar or 103 bar
Part-No.
Description: Viscount II
243 740
243 751
243 752
247 355
247 356
247 357
247 358
247 359
247 360
247 361
243 741
248 343
248 344
243 742
248 345
248 346
210 313
Viscount II Plus ,
Viscount II Plus,
Viscount II Plus,
Viscount II 460, NPT
Viscount II 460, BSPP
Viscount II 460, BSPP
Viscount II 460, TriClamp
Viscount II 460, TriClamp
Viscount II Plus 400,
Viscount II 300 HF,
Viscount II 300 HF,
Viscount II 300 HF,
Viscount II, 1000,
222 892
222 897
222 834
222 900
245 168
237 290
Viscount
Viscount
Viscount
Viscount
Viscount
Viscount
248 817
245 180
223 646
II,
II,
II,
II,
II,
II,
Lower
Manual
Lower 243 731, 600 HF, CS,
(309136)
Lower 243 734, 600 HF, SST,
(309136)
Lower 243 743, 600 HF, SST, 2″ BSP(F), (309136)
Lower 253 035 HF, Chromex / Chrome, SST, (311690)
Lower 253 063 HF, Chromex / Chrome, CS, (311690)
Lower 253 396 HF, Max-Life / Max-Life, SST, (311690)
Lower 243 732 HF, bare pump, CS,
Lower 248 330 HF, bare pump, SST
Lower 248 330 HF, bare pump, 2″ BSP(F)
Lower 243 733, CS, bare pump, 1,5
Lower 248 331, SST, bare pump
Lower 248 331, SST, bare pump, 2″ BSP(F)
UP 210 208 CS, bare pump,
(308 043)
DF 1800,
DF 1800,
DF 2400
DF 2400
UP 222 796 DF430cm³, CS , bare pump (311 825)
UP 222 805 DF430cm³,SST , bare pump (311 825)
UP 222 801 DF580cm³, CS, bare pump
UP 222 803 DF580cm³, SST, bare pump
UP 244 414, Xtreme 220cm³, CS, bare pump
DF 900
UP 236 470, housing ball piston CS,
(308 354)
Leather / PTFE
Viscount II, DF 900,
UP 248 216, housing ball piston CS,
(308 354)
UHMWPE / PTFE
Viscount II, Xtreme
UP 244 416, 250cm³, CS, bare pump
(309 340)
Motor Viscount II (Quiet) With base for Viscount II
05/08/2008 13:06
2-2
Manual
Ratio
1:2,5
309 136
311 211
Ratio
1:3,75
Ratio
1:1,5
Ratio
0,67:1
Ratio
1,73:1
Ratio
1,33:1
Ratio
3,5:1
Ratio 3:1
309 136
309 136
307 160
308 147
308 148
308 151
308 152
309 340
308 354
308 354
309 340
308 048
VISCOUNT (2)
Viscount I
Viscount II
236 865
450
2100
800
1 ¼-11 1/2NPSM
¾ - 14 NPT
965 322
¾ - 14 NPT
222 902
246 937
246 938
1 ¼- 11 ½ NPSM
Hydr. Aggregate
118 430
Ram 3”
Check-Mate 2100
Ram 3”
Check-Mate 800
Surge Tank
234 376
234 378
05/08/2008 13:06
218 742 (stand)
218 509
238 983 (2” SST)
2-3
Viscount (2)
Part-No.
965 322
246 938
222 902
246 937
Part-No.
234 378
234 376
Part-No.
235 345**
223 646+
Description:
Viscount I,
Check-Mate 450,
Viscount II,
Check-Mate 800,
Viscount II,
Check-Mate 2100,
Viscount II,
Check-Mate 2100
Lower
Lower 222 790 CM, CS, bare pump
(308 017)
(308 351)
(308 419)
Lower 246 934 CM, CS, UHMWPE, Tuff stack
(308 149)
Description
Viscount II,
Check-Mate 800, (246 938)
Viscount II,
Check-Mate 2100, (246 937)
Description
Viscount II, Motor
Viscount II, Motor quiet
Manual
Extrusion
2,12 : 1
Ink
3,9 : 1
Extrusion
1,53 : 1
Ink
1,53 : 1
308 351
308 149
308 149
RAM
200 L Ram 3″, Drum clamp Neoprenringe (white)
Ink
Manual
308 027
200 L Ram 3″, Drum clamp Neoprenringe (white)
Ink
308 027
Motor
Bare motor
Bare motor
Manual
307 158
308 048
Accessories
218 742
Stand for surge tank
Accessories
307 707
for Viscount II HF Serie
218 509
Surge
Accessories
238 983
Surge Tank 2″ SST
Accessories
118 430
Hydraulic-Aggregate 5,5 kW 60Hz, 230V 3-phase or 50 Hz, 380V, 3-phase, max 82 bar 38 L/min 307 550
236 865
Hydraulic-manifold hydr. Inlet ¾″ - Outlet 1 ¼″ incl. 0,9 m hose set
308 395
Note: Viscount II Check-Mate 2100, installation 200 L RAM, only with 6,5″ RAM (pump size),
used with 3″ RAM remove the top screw of the hydraulic motor
Viscount II HF repair and conversion kit Manual 309 130
Viscount II HF piston conversion kit Manual 309 175, 309 176, 309 177
+ = Standard Viscount II HF pump
HF = High-Flo,
DF = Dura-Flo
CM = Check-Mate
** = oil requirement per double stroke 0,76 l - oil pressure up to 105 bar
05/08/2008 13:06
2-4
Dyna-Star
part no
236 753
224 741
224 742
237 653
236 754
224 912
224 751
224 752
247 443
247 450
247 444
243 170
247 538
ratio
¼:1 (26 bar)
1:1 (102 bar)
1:1 (102 bar)
1:1 (69 bar)
1:1 (103 bar)
5:1 (102 bar)
5:1 (102 bar)
5:1 (102 bar)
10:1 (517 bar)
10:1 (517 bar)
10:1 (517 bar)
236 753
description
Universal pump stubby
(Motor 239 884)
(Motor 239 882)
Universal pump 55Gal
(Motor 239 882)
Universal pump stubby SST (Motor 239 882)
(Motor 236 752)
Universal pump 35 lb
(Motor 239 883)
(Motor 239 883)
(Motor 239 883)
Pump 55 kg (120 lb) flow rate 600cm³ / DH
Pump 180 kg (400lb) flow rate 600cm³ / DH
Pump Module „dyna star pump“
vent valve kit
hyd. control module kit
236 754
224 741
224 742
237 653
243 170
308 155
308 391
308 156
321 350
312 349
224 912
224 751
224 752
247 538
247 443
247 450
247 444
05/08/2008 13:06
manual
308 390
2-5
Magnum DX
Magnum XR9
ST Max™
395/(II)495/(II)595
ST Max™395 / (II) 495
395 with hopper
245 936
small
hopper
234 176, 233 963
233 972, 249 928
249 929, 249 936
232 751
232 752
232 736
232 737
UK
ST Max™ II 495
Ultra Max II 1095
Ultra Max™ II 695 / 795
lo boy
pro connect
233 955
234 286, 249 930
249 978, 249 931
249 979, 249 937
249 980
– blue
I, CH, DK –
red
Europe –
black
Finish Pro 390 / 395
255 110
255 112
255 114
253 014
249 667
249 672
249 675
249 663, 249 668, 249 671
249 673, 249 666, 249 674
Mark V
Mark X
pro connect
pro connect
Hopper
255 111
255 113
255 115
and
Bag Roller
Mark V & Mark X
EH 200 HDI
249 905
249 907
249 906
289 587
249 627
249 628
287 987
255 094
1“NPS (F)
Electric Motor
EH200
Kit - Filter (311 515)
(accessory Mark X)
287 995
245 103
Rep Kit
-EH, GH, Gmax,
-UM1095 UM1595
-LL
-Mark V
243 380
Fitting for second hose
162 485 ⅜ “/ ⅜” (Mark V)
164 672 ⅜” / ¼ “ (695-1595)
Kit - Filter
390 Units
249 056
connecting hose
hopper - lower
Purge Valve (rep kit)
for ST Max to Mark V
Auto Clean
244 253
287 293
extra:
224 807 base
187 625 lever
111 600 pin
235 014
05/08/08
3-1
248 946
Part-No.
232 736
232 737
232 751
232 752
234 176
233 963
233 972
233 955
233 963
233 972
234 286
249 928
249 929
249 936
253 014
249 978
249 979
249 980
249 930
249 931
249 937
249 663
249 668
249 673
249 666
249 671
249 674
249 667
249 672
249 675
Description
Magnum DX roller airless unit 230V, 0,91 l/min
(Denmark, Switzerland, Italy)
Magnum XR9 Cart, 230V, 1,44 l/min
ST Max 395 Stand 230V, 1,7 l/min
110 Volt (for U.K.)
ST Max 395 Hopper 230V, 1,7 l/min
(I, CH, DK)
excl. hopper 246 388
110 Volt for U.K. excl. hopper 246 388
ST Max 395, Hi Boy
ST Max 495 II Stand 230Volt , 2,1 l/min
(I, CH, DK)
110 Volt (for UK)
ST Max 495 II Lo Boy
ST Max 495 II Hi Boy
(I, CH, DK)
110 Volt (for UK)
ST Max 595 II Hi Boy 230Volt, 2,3 l/min
(I, CH, DK)
110 Volt (for UK)
Ultra Max Premium 695II Hi Boy,230 V, 3,0 l/min
(I, CH, DK)
110 Volt (for UK)
Ultra Max Premium 795 II, 230 V, 3,6 l/min
(I, CH, DK)
110 Volt (for UK)
Ultra Max ProConnect 1095 II, 230V, 4,1 l/min
(I, CH, DK)
110 Volt (for UK)
255 110
255 112
255 114
255 111
255 113
255 115
249 905
249 907
249 906
249 627
249 628
Finish Pro 390,
(I, CH, DK)
110 Volt (for UK)
Finish Pro 395,
(I, CH, DK)
110 Volt (for UK)
Mark V ProConnect, 230 V,
(I, CH, DK)
110 Volt (for U.K.)
Mark X, 230 Volt, 9,1 l/min
( I, CH, DK)
255 094
EH 200 (253 581), 230V, Electr./Hydr. 6,4 l/min,
4,3 l/min
Accessories
7,5m ¼″ hose, roller, gun, RACV,
Application Manual
309 470
Airless
309 477T
309 478
Airless
309 477T
15m ¼″ hose, gun, RAC V,
15m ¼″ hose, gun FTX, RAC V 517 tip,
Display (inlet 1 5/16“–12 un(A))
lower 246 428 (309 250)
Airless
309 674R
309 706T
15m ¼″ hose, gun FTX, RAC V, 517 tip,
lower 246 428 (309 250)
Airless
309 674R
309 706T
Display (inlet 1 5/16“–12 un(A)
Airless
309 665B
309 674R
309 706T
Airless
309 665B
309 674R
309 706T
lower 246 428 (309 250)
Filter Gun PRO FTX-E
287 032: 60 Mesh, 287 033: 100 Mesh
287 034: 60&100 Mesch
lower 246 428 (309 250)
15 m, ¼″ hose, whip hose, gun 248 475,
RAC X, Tip LTX 517, (inlet 1 5/16“–12 un(A)
lower 248 204 (310 643)
Fluid Filter Ultra-Max II 695 - MarkV Smart
244 071: 30 Mesh, 244 067: 60 Mesh
244 068: 100 Mesh, 244 069: 200 Mesh
15m ¼″ hose, whip hose, gun 248 475,
RAC X, Tip LTX 517, (inlet 1 5/16“–12 un(A)
lower 287 513 (310 894)
15m Air/Fluid hose 288 620, gunG40
288513, Tip FFT210
lower 255 198 (312 015)
15m Air/Fluid hose 288 620, gunG40
288513, Tip FFT210
lower 255 198 (312 015)
15m, ⅜“ hose., whip end, swivel, gun,
GHD 631, inlet 1“–11 ½ NPS(A),
lower 287 928 (310 894)
15m, ⅜“ hose., whip end, swivel, gun,
Tip TMX 535 & 545
lower 287 946 (309 277)
15m, ⅜“ hose, whip end, swivel,
Texture gun kit (241338), XHD RAC,
Tip 631, pressure gauge (241 339)
lower 288 819 (311 845)
Airless
311 344B
311 365R
311 363T
Airless
311 344B
311 365R
311 363T
309 953
Air Mix
312100
Air Mix
Airless
Airless
Airless
Accessories
246 388
Hopper ST Max 395/495
(old: 243 496: Hopper 395/495 ST Pro (309 166))
287 987
Texture hopper, Mark V & Mark X, 95 Liter (25 Gal.)
289 587
Bag roller (for texture hopper 287 987)
243 380
Connecting hose for connecting hopper to lower
240 296* Hose strap (4 pieces pack)
240 565* Hose strap (10 pieces pack)
287 995
Fluid filter - kit Mark V (accessory for Mark X)
162 485
⅜ “(m) / ⅜” (m) fitting second hose connect (Mark V)
164 672
⅜” (m) / ¼” (m) fitting second hose connect (Ultra-Max 695-1595)
Fluid Filter Ultra Max II 695 – Mark V
244 071* 30 Mesh
244 067* 60 Mesh
Fluid Filter ST-Max 395 – 595
246 425* 30 Mesh
246 384* 60 Mesh
246 386*
098 265*
249 056
248 946
248 949
287 293
244 253
244 068* 100 Mesh
244 069* 200 Mesh
246 382* 100 Mesh
246 383* 200 Mesh
311 344B
311 365R
311 363T
311 421
310 778
312 154
312 159R
309 825
311 534
311 535
309 012
311 515
15C 766* Tube diffusion
Suction - kit ST Max 395/495 without return hose, connection 1 ¼“–12 UNF–2B
309 706
Container Suction Kit (3/4”NPT) Ultra Max
243 167* Container Suction Kit (1”NPT) Tex spray Mark V
Fluid filter Kit for 390 incl. 60 mesh sieve 246 384
311 012
Electric Motor (230 V - 2,2 KW), for EH 200 (248 567),
310 812
GH 200, Model 120 Volt
Auto Clean 2 Kit (valve and clamp), plug 248 314
309 955
Auto Clean 1 Kit (valve and clamp), plug 196 781
* not shown
05/08/08 13:03
3-2
T-MAX, GTX, RTX, TEXTURE & GM 1030
T-Max 405
T-Max 506 - 657
Applicator texture
Bag roller
Bag Roller
289 823
T-Max 405
Hopper
Rep Kit 248 627
248 164
289 946 76 Liter
289 947 106 Liter
(for Texture 248 164)
289 588
248 195
248 269
249 075
Filter
Application
box
248 521
248 522
248 405
248 326
Tex Spray GTX 2000
Texture Gun
Gun GTX 2000
T-Max 506
255 794
255 796
255 798
T-Max 657
255 975
255 797
255 799
Mixer mount
No bleeder
gasoline
Texture Gun
256 383
Coupler
(Male 1”)
Rep kit
289 916 spool
289 918 O-Ring
289 931
118 487
248 091
248 093
248 082
248 083
248 084
UK
Round air nozzle
Airless tip
Europe –
black
TMX
248 370
248 315
I, CH, DK –
red
Fine Finish Tip
RAC 5
248 888
248 524
248 525
248 526
248 527
RTX 1500
– blue
287 227
Tip RTX 1500 & GTX 2000
15C 883 15C 888
238 080 Flex heat
Tex Spray 1030FC
Texture Gun
for Tex Spray 1030FC
Hopper
234 225
234 222
238 807 Pole Gun
Flex head and Pole Gun Tip
190 943 4,8 mm
190 944 6,4 mm
190 945 8,0 mm
190 946 9,5 mm
245 872
234 113
Ext. compressor
connection Kit
drill 248 395
Cam - Lock
Adapter swivel
15D 985
118 487
118 506
245 924
Gun + Hopper 234 225
287 337
287 328
Gasket
118 872
05/08/08 13:03
3-3
T-MAX 405/506/657, GTX 2000, RTX 1500 & GM1030 TEXTURE
Part-No. Description
248 195 T-Max 405
248 269
5,7 Liter/min
249 075
Accessories
5m 1″ hose, 3m ¾″ hose = 8 m, 15m ⅜" I.D. air hose ¼“NPT (A) with needle valve
and quick connect, Box incl.: Nozzle 6mm RND, Tip Spray, RAC V, 651 Tip, filter
screen texture 30 and 18 Mesh. Cleaning tool drill, brush and ball sponge Ø 1”
Manual
309 973B
309 977R
Accessories
289 588
248 164
248 523
248 395
248 557
248 520
248 518
248 521
248 405
248 888
248 525
248 527
255796
255794
255798
255797
255795
255799
289 931
Bag roller T-Max 405,
Incl. multi purpose tool 15D 949
Texture Applicator gun with nozzle 6mm and TMX 651 , (spool Rep Kit 248 627)
extension 120 cm
(max 17 bar Air)
drill Ø 2,778 mm
248 515
Ø 1” ball sponge 5 pieces kit
15 m air hose ⅜″ regulator (112 779) and quick connect air (114 558)
3 m fluid hose ¾″, whipped end
10 m fluid hose 1″
248 519
5 m fluid hose 1″
Filter sieve 30 Mesh, 2 p. kit with cap
248 522
Filter sieve 18 Mesh, 2 p. kit with cap
Tool box applicator (248 326 box “empty”)
3 mm
24 524
4 mm
Airless tip, with RAC V
TMX 531, 535, 541, 545, 651, 661 und 671
Round air
6 mm
248 526
8 mm
nozzle
(TMX tip are without diffuser)
10 mm
T-Max 506
6,4 Liter/min
and quick connect, cleaning tool drill, brush and ball sponge Ø 1”,
Hopper 76 Liter
T-Max 657
7,2 Liter/min
and quick connect, cleaning tool drill, brush and ball sponge Ø 1”,
Hopper 106 Liter
Hopper mixer Mount accessory
312 771
289 823
Bag Roller
GTX 2000
248 082 Tex Spray GTX 2000, gasoline
7,5m hose kit 1″, 248 093 Texture Gun
248 083 Tex Spray GTX 2000, gasoline
7,5m hose kit 1″, 238 080, Flex head Gun Texture
248 084 Tex Spray GTX 2000, gasoline Husky 1040,
7,5m hose kit 1″, 238 807 Pole Gun
Material
max.15l/ min, 8,3 bar
hopper volume 64 litre
(gun not already air closed)
248 093 Texture gun, bleeder
118 487 Quick connect 1″
Texture
approx. 50 cm
238 080 Texture flex head gun (hose) not for RTX 1500
Material
not for RTX 1500
approx. 80 cm
238 807 Texture pole gun
RTX 1500
248 370 RTX 1500 Texture, 220 Volt 50 Hz, 10 A
7,5m hose kit 1″, Texture Gun 248 091
248 315 (I, DK, CH)
hopper volume 57 litre
Tip for RTX 1500 & GTX gun
Texture
Max air pressure 3,1 bar
15C883 3 mm tip 15C884 4 mm tip Material
Max delivery 7,57 l/min
15C885 6 mm tip 15C886 8 mm tip
15C887 10 mm tip 15C888 12 mm tip
248 091 Texture Gun, non bleeder
Hose Kit with armature for RTX 1500 & GTX 2000
(incl. C.-lock coupling)
287 304
19 mm inside Ø fluid hose 7,6m and 9,5mm inside Ø air hose 7,6m
(C.-lock coupling 287 192)
287 305
25 mm inside Ø fluid hose 15m and 9,5mm inside Ø air hose 15m
287 306
32 mm inside Ø fluid hose 7,6m and 9,5mm inside Ø air hose 7,6m
287 307
32 mm inside Ø fluid hose 15m and 9,5mm inside Ø air hose 15m
Accessories
287 227
Fine Finish Kit incl. Tip 3,2mm, 6,4mm, 8,0mm, 9,5mm
248 112
Suction Kit 1 ¼“ hose 1,2m, tube 775 mm for delivery out of separate tank
287 328
Auxiliary Air Kit allows use of external air supply for greater air atomization at spray gun
287 337
Cam-Lock-coupling 1“(I) x 1“(A) to connect hose with Cam-Lock
118 506
Cam-Lock-coupling 1″NPT(A)
15G 352
Gasket, replacement for 118 506 Cam-Lock-coupling
15D 985
Fitting 1“NPS(I) x 1“NPT(A)(hose 287 304 / 307) to Husky-Pump
118 872
Gasket, replacement for 15D 985 fitting
248 117
GTX air hose inside Ø 9,5mm, 15m,
1030 FC
234 113
Tex Spray
15m hose kit ½″ air, ¾″ fluid, texture gun 235 490
1030 FC,
lower 235 166, rep. kit 235 186
gasoline
Texture
3,4 bis 11,4
l/min, max.
60 bar
309 976
309 987
310 737
309 977
309 978
309 977
312 891
312 790
309 915B
309 916T
308 603
310 616
308 603
308 603
310 624B
310 645T
310 624B
310 616
310 616
310 694
309 916
309 663B
309 662T
Material
245 872
Texture gun incl. 234 235 nozzle kit, round – and flat tip
309 661
245 924
234 225
234 153
Texture gun and hopper 5,5 litre
Material delivering hose ¾“–11,5 thread
Hopper 5,5 litre
234 222 Hopper 2,8 litre
Nozzle Kit, Texture/Hoper gun inc. tips beige 4mm, white 6mm, grey 8mm, black 12mm
309 584
309 584
309 584
05/08/08 13:03
3-4
HVLP TURBINE UNITS
HVLP2500, HVLP3800, HVLP4900
233 430
233 431
233 433
HVLP ProComp ™
inc.
hose air 241 413
hose air 240 071
Air valve
GTX
240 065
Quick connection
244 137
240 273
Air cap
plug & coupling
192 792
240 274
HVLP Gun
M70 394
HVLP Gun
nipple
under cup
192 789
240 273
240 274
197 057
244 118
244 115
M70 402
¾” –11 1/2NH
Y-connection
244 117
244 113
M71149
plug
10-32 UNF
244 836
244 135
check valve
Cup-Gasket
5 pieces
coupling
240 282
Lid
244 226
244 227
M71 681
Tube
M71 671
240 069
193 218
240 267
Cup under assembly
Lid
M70 610
196 465
240 265
(nipple)
243 714
244 131
fluid set (FS#3)
244 130
Radiator Kit
287 819
HVLP ProCart
pressure pot
1,9L
244 118
thread ¾ „ – 11 ½ NH
159 076 o-ring
straps
10 St. used
244 136
cup over
M70 402
or
240 065
103 473
electr. cable
244 138
198 115
air filter
compressor
Air – and
material hose
length
part no.
9m
241-423
18 m
241-426
Turb. air hose black
length
part no.
9m
241-413
12 m
241-414
15 m
241-415
18 m
241-416
Fluid hose
length
part no.
9m
240-476
12 m
240-477
15 m
240-478
18 m
240-479
M70-693 nipple,
brass 3/8“ NPS(A)
To connect for
two fluid hose
05/08/08 13:03
3-5
Pressure pot
standard
M70-604
PTFE
240-045
-
116 281
195 551
242 001
Air hose compress. pressure pot
cup
length
part no.
9,5 L
0,6 m
240-075
9m
240-071
1,95 L
15 m
240-073
Note:
111-265 silikon-free grease (4oz)
see flyer 300-519 for accessories HVLP
see flyer 300-674 for accessories ProComp™
HVLP TURBINE UNITS
Part No.
Description
233 430
233 431
233 433
233 449
233 450
246 857
249 768
244 117
244 113
244 118
244 115
244 130
244 131
244 132
244 135
243 714
M71 671
244 133
244 836
244 136
244 134
240 265
244 953
193 218
240 267
192 792
240 274
244 137
240 273
198 115
240 069
M70 402
240 065
M71 681
240 282
287 819
244 138
240 272
244 226
244 227
197 448
241 099
116 281
240 545
240 546
HVLP-2500, 9,0m hose, gun 244 117, nozzle 1,3mm (#3)
HVLP-3800, 9,0m hose, gun 244 117, nozzle 1,3mm (#3),1,8mm, (#4), 2,2mm (#5)
HVLP-4900, 9,0m hose, gun 244 117, nozzle 0,8mm (#2),1,3mm, (#4), 2,2mm (#5), 2,5mm (#6)
HVLP Pro Cart, Compressor/Carts 9m hose, 9,5 L pressure pot
Incl. 233 433 (HVLP4900) & 233 449 (HVLP Pro Cart)
HVLP-3800 ProComp™, gun 244 118, nozzle 0,8mm (#2), 1,3mm, (#3),
HVLP-4900 ProComp™, gun 244 118, nozzle 0,8mm (#2), 1,3mm, (#3),
HVLP-Turbine Gun (under cup), 1 L, nozzle 1,3mm (3) (tech-243853)
HVLP-Turbine Gun (under cup), 1 L, without nozzle !!!
HVLP-Turbine Gun, nozzle 1,3mm (#3)
HVLP-Turbine Gun, without nozzle !!!
Under Cup 1 L
Under Cup 1 L, with airtight lid for material storage
Under Cup 1 L, without lid
Cup check valve kit (5 pieces with O-ring),
O-ring separately 104 893
Lid assy cup, with clamp and fluid tube
Fluid tube, for 1 L under cup
Tube - kit (5 pieces) for Gun (under cup) approx. 16,5cm
Check valve – conversion kit (under cup)
Cup over kit, incl. cup / lid / clamp / tube
Tube – kit (5 pieces) for Gun (cup over) approx. 40,5cm
Lid gasket, (PP) 1 L cup (5 pieces)
M70424 Lid gasket, (PP) 1 L cup (1 pieces)
Lid gasket (PE) , 9,5 L pressure pot
Strainer 1 piece
Strainer 3 pieces
Filter (HVLP Turbine 2500 -3800 – 4900 & ProComp 3800 / 4900) 1 piece
Filter (HVLP Turbine 2500 -3800 – 4900 & ProComp 3800 / 4900) 5 pieces
Turbine mainfilter for HVLP 2500
Turbine mainfilter for HVLP 3800 und 4900
Compressor air filter (Pro Cart 233 449) Ø 111,25
Y-Adapter to connect of 2 air hoses
Quick disconnect coupling ¾″ – 11 ½ NH(f)
Air control valve, with quick disconnect coupling
Air control valve, incl. O-ring M70721 without quick disconnect coupling
Air disconnect coupling ¾″-11 ½ NH(m) x ¾″-11 ½ NH(f) for connecting hose to turbine
1,9 L Pressure pot, aluminium, 1,4 m Turbine – hose kit
Radiator - kit
Caster wheel compressor – Repair kit, ProCart
Fine Finish air cap (standard)
Heavy Duty air cap (option)
Gun tool
GTS-4900 HVLP Turbine (114 651) conversion kit
Cord Set 2,4 m Euro 230V, (not incl. 195 551 clamp, 242 001 plug 20 cm)
Brush kit HVLP 2500
Brush kit HVLP 3800 & 4900
manual
309 243
309 244
309 907
309 205
309 205
309 205
309 205
309 205
309 205
309 349
309 283
309 243
309 244
311 359
309 284
309 205
309 205
308 973
309 243
309 243
* not shown
Needle / Nozzle -Kid
part no.
size
application
244 122 accessories kit:
244 123
244 124*
244 125
244 126
244 127
244 128
Solvent, pickle, varnish
Varnish and pickle, solvent contain / watery
Filler
Filler
Spotted
Spotted
-
#2
#3
#4
#5
#6
#7
0,8 mm
1,3 mm
1,8 mm
2,2 mm
2,5 mm
2,8 mm
# 2 Needle / Nozzle kit
Gun tool
Cleaning brush
* = Standard in gun (not in gun 244115)
HVLP TURBINE UNITS 120 Volt 50/60 Hz
233 438
233 439
233 441
241 996
HVLP–3800, 9,0m hose, gun 244 117, nozzle 1,3mm (3) 2,2mm (5)
HVLP–4900, 9,0m hose, gun 244 117, nozzle 0,8mm (2) 2,8mm (6)
HVLP Pro Cart, Compressor/Carts 9m hose, 9,5 L pressure pot
Cord Set U.K 120V HVLP 3800 - 4900
Note:
Recommend Bleeder Gun for Series 500, GTS-2500 is 244 xxx HVLP Turbine-Gun,
but the valve 243 842 (Pos.26) must be change vs. 244 184 valve.
05/08/08 13:03
3-6
309 243
309 243
309 241
Chapter 4
PETROL
OPERATED
UNITS
17.02.2009 10:25
4-1
G MAX
7900
G MAX II
3900, 5900
GM 3400
248 664
255 632
249 335
248 699
GH 833
GH 200
GH 230
GH 300
231 733
687 100
687 327
255 095
253 965
253 968
Gasoline motor
GH200
LL200HS
Accessories
GH 833
GH 733
GH 5030
GH 3640
12 Volt
Battery kit
Turf wheel
Drain Valve
245 103
motor - kit
248 943
OEM lower - kit
200L Drum immersion-kit
253 473
287 843
249 082
245 340
253 471
LineLazer IV 3900- 5900
Auto layout™
LineLazer
3400
LineLazer IV 200HS
Auto layout™
249 012
249 013
249 008
249 009
249 010
249 011
249 007
245 343
Wind-Deflector
Pointer guide
277 062
277 063
Light Kit LL4
277 061
60 L Hopper
248 393
Spray Shield
kid LL
241 284
245 465
287 553
17.02.2009 10:25
262 004
262 005
245 321
245 519
277 066
Second
Gun kit
LineDriver
Hitch Kit
LineDriver
248 777
245 520
255 155
255 156
255 155
255 156
FieldLazer
Striping Ramp
287 626
D-valve kit
G-Max & LL2
4-2
249 081
Hopper Kit
287 987
EZ Bead kit
277 064
277 065
GM 3400 / GMax 3900 - 5900 - 7900 / GH 200 - 230 - 300 - 733 - 833
Part N°
248 664
248 663*
249 335
248 699
255 632
249 099
249 446
249 447
231 733
description
GMax 3400, Gas
accessories
15m ¼″ hose, whipped, gun RAC X tip 621
3,5HP@3600rpm/ 2.4 l/min
GMax II 3900, Gas
3.5HP@3600rpm/ 4.4 l/min, Display
GMax II 5900 HD, Gas
4.8HP@3600rpm/ 5.7 l/min, Display
GMax 7900, Gas
5.5HP@3600rpm / 7.9 l/min, Display
lower 235 699 (308 190)
GH 200, Gas
GH 733, Benzin, (Kohler)
253 473
GH 5030 Roof Rigs
GH 3640 Roof Rigs
GH 833, Benzin,
11HP@3600rpm, 15.1 l/min
GH 833 OEM – lower kit
Airless
Airless
lower 287 512 (310 894)
15m, ⅜″ hose, whipped, Tex.-gun GHD - tip 527
Airless
lower 287 579 (310 984)
15m ⅜″ hose, whipped, Tex.-gun GHD - tip 527
Airless
lower 249 122 (310 894)
15m ⅜″ hose, 1,8m ¼″ whipped, Tex.-gun GHD
527 lower 248 971(309 277)
4.8HP@3600rpm/ 7.5 l/min
GH 230, 5.5HP@3600rpm, 8.7 l/min Dito lower 248 736 (309 277)
GH 300, 8.0HP@3600rpm, 11.4 l/min Dito lower 248 736 (309 277)
13.4KW / 11.4 l/min
687 100
687 327
253 471
15m ⅜″ hose, whipped, Tex.- gun GHD - tip 527
application
Airless
Airless
Airless
Airless
Suction hose and tube
Without fluid filter / hose / etc.
Bare without hose or gun
With suction hose and tube
Ratio 1,45:1, max 15,1 l/min
Airless
Airless
Airless
manual
310 802
310 813R
310 892
310 893R
310 892
310 893R
310 892
310 893R
310 765
310 778R
310 778
310 778
307 616
308 972
308 972
311 279
311 484R
311 492
accessories:
248 943
287 843
245 395
287 516*
248 598*
287 987
243 392
243 380
Motor quick replacement, GH200, LL 200HS,
GH 833 Drum immersion – conversion kit 200 liter
GMax Auto Clean kit
Board control GMax II 3900 / 5900 / 5900HD 244 981* Board control HydraMax 225 / 300 / 350
Sensor kit HydraMax 225
248 599* Sensor kit HydraMax 300 und 350
Texture Hopper for G-max 5900, G-max 7900, and Ultra max 1595
Extension kit G-max 5900 and Ultra 1595 for direct connect to texture hopper
Camlock-hose set for connecting G-max 7900 to texture hopper, 2″ (50,8 mm x 0,9 m)
310 778
311 493
309 450
311 049
310 714
311 534
309 012
309 012
LineLazer 3400 – 3900 – 5900 – Field Lazer
249 007
249 008
249 009
255 151
255 152
249 010
249 011
255 153
255 154
249 012
249 013
255 155
255 156
248 777
248 942*
Lin Lazer 3400
3.5HP@3600rpm / 2.36 l/min
LineLazer IV 3900,
3.5HP@3600rpm / 4.4l/min, Display
LineLazer IV 3900
LineLazer IV 3900, AutoLayout
LineLazer IV 5900,
4.8HP@3600rpm / 5.7l/min, Display
LineLazer IV 5900, Display
LineLazer IV 200 HS
4.8HP@3600rpm / 7.6l/min (GH200)
LineLazer IV 200 HS
LineLazer IV 200 HS AutoLayout
LineLazer IV 200 HS AutoLayout
FieldLazer, Gas
1.3HP@7000rpm / 1.9 l/min
15m ¼″ hose, gun RAC5 tip 415 , pressure gauge
lower 246 428 (309 250)
15m ⅜″ hose, gun, RAC 5 tip LL5-319 tip 286 517
lower 277 069 (310 643)
similar 249 008, but with 2 guns
similar 249 008, but with AutoLayout
lower 277 070 (310 643)
Airless
Airless
Airless
lower 246 426 (309 053)
311 017
311 020R
312 190
312 195R
Airless
Airless
Airless
lower 277 068 (309 277)
7,5m, 3/16″ hose, gun RAC5 tip 421
311 016
311 019
ports
field
311 017
311 020R
312 190
312 195R
311 018
311 021R
311 021
312 194
312 226R
310 810
accessories:
262 004
277 065
277 067
245 519
245 520
277 062
248 393
287 553
245 465
241 284
287 626
15T336*
249 089
249 187
262005 Similar 262 004 but 200cm³
LineDriver 160cm³, without battery, contain hitch kit 245 321
Spray sprinkler with one sprinkler (152mm) for LineLazer IV 277 064 With two sprinklers
245 516 Similar 277 067 but 305mm
Spray sprinkler, 152mm with delivery hose and clamps
277 066 Similar but aluminium
Wind-Deflector, 152mm, 6 per pack plastic,
Wind-Deflector, 305mm, 3 per pack
277 063 Similar but 1016mm length
Pointer guide 610mm length
Hopper 60 l für LineLazer II, III & IV 3900 und 5900 (for LL 3500 u. 5000 Mod. 248 394)
Montage set with second gun for LineLazer IV 3900 / 5900 / 200HS
Montage set with second gun for LineLazer Ill 3900 u. 5900
Montage set with second gun for LineLazer II 3900 u. 5900
Stripping ramp , 50cm with 2x 286 725 RAC V reversing tip
245 343 12 Volt battery / Line Lazer
Auto Layout Spray (calk-spray) 500ml
277 061 Light kit only for LL-IV
Replacement wheel for LineDriver
249 081 Adjustable spray shield
Turf wheel LL3900/5900 or 200HS
312 540
311 068
311 068
311 069
311 067
310 660
311 066
309 416
308 939
311 289
309 406
311 025
311 008
accessories: Linelazer & Gmax/GH/GM:
245 103
241 339*
240 296*
Drain valve rep. kit for G-Max, LineLazer II units, (Smart 1595 und Mark V)
Gauge combination Max units ⅜″
240 565*
Hose retaining band - pack of 4
without picture*
17.02.2009 10:25
4-3
308 961R
308 962
Hose retaining band pack of 10
G-FORCE PRESSURE WASHER
G-Force 2525
G-Force 4043
G-Force
2730-190
3030-210
3340-230
3540-245
246 930
249 301
800 222
208 008
803 350
803 351
804 589
800 707
244 811
244 812
244 813
244 814
244 815
Coupling quick
release 1/4“
801 009
O-Ring 154 594
Spray tip type “M”
800 429
Coupling quick
release 3/8“
801 569
244 784
805 312
805 316
805 313
805 321
Gardena
O-Ring 156 082
244 779
15B 910
Gauge
116 564
804 582
205 910
205 911
Handle
Spray tip type “Q”
Rotating tip
160 959
160 970
160 958
160 921
165 090
Oscillating tip
198 012
198 014
Nipple
198 013
Quick disconnect
801 090
197 428
801 568
801 009
803 156
801 569
803 157
801 091
249 101
207 299
249 101
M22x1,5–3/8
Quick Connect
802 851
Washer
extension
Surface Cleaner
Sandblast-Kit
800 031
244 766
116 562
Hydra clean tip
805 543, 805 547
805 544, 805 548
805 545, 805 549
805 546, 805 550
805 634, 805 566
801 558
803 499
17.02.2009 10:25
801 134
803 500
4-4
G-FORCE PRESSURE WASHER
Part No
Description
246 930
249 301
800 707
244 811
244 812
244 813
244 814
244 815
803 350
244 784
244 779
800 429
803 351
208 008
G-Force 2525, 4.6HP@3600rpm, 159 bar, direct drive (Gun 244 779), max 9,0 l/min (Honda), 4 tips
G-Force 2626, 5.2HP@3600rpm, 179 bar, direct drive (Gun 244 779), max 9,8 l/min (Honda), 4 tips
G-Force 4043-280, 16 HP, 280 bar, drive belt (Gun 244 784) (Briggs & Stratton)
G-Force 2730-190, 6,5 HP, 186 bar, direct drive, (Gun 244 779), Max 9,0 l/min (Briggs & Stratton)
G-Force 2730-190, 5.5 HP@3600rpm, 186 bar, direct drive, (Gun 244 779), Max 9,0 l/min (Honda)
G-Force 3030-210, 8.0 HP@3600rpm, 210 bar, direct drive,,(Gun 244 779), Max 11,4 l/min (Honda)
G-Force 3340-230, 9.5 HP@3600rpm, 227 bar, direct drive, (Gun 244 779), Max 13,2 l/min (Honda)
G-Force 3540-245, 11 HP@3600rpm, 245 bar, direct drive, (Gun 244 779), Max 15,1 l/min (Honda)
Hydra-Clean Gun,
280 bar, brass,
inlet ⅜″, outlet ¼″
Hydra-Clean Gun,
345 bar with Lance 91 cm, inlet ⅜″, outlet ¼″, quick disconnect
Hydra-Clean Gun,
345 bar with Lance 45 cm, inlet ⅜″, outlet ¼″, quick disconnect
Hydra-Clean Gun (804 589), 280 bar with lance 81 cm and handle
Hydra-Clean Gun, SST,
280 bar,
inlet ⅜“, outlet ¼“ all guns Max 71°C
Hydra-Clean Gun, SST,
86 bar, swivel,
inlet ⅜″, outlet ¼″
manual
116 564
Telescoping Gun 5,5 m, 276 bar, outlet ¼″ quick disconnect fitting for Q-nozzle
246 377
Oil for all G-Force pumps SAE 30W 0,95 litre (not for 118122)
(G-Force 2525LD und 2626LD)
116 562
Surface cleaner, horizontal 280 bar
244 766
Wet sandblasting kit, please order valve 800 031 and nozzle separately
198 012
Rotating pressure washer tip, 250bar
198 014
Rotating pressure washer tip, 350bar
198 013
Oscillating pressure washer tip, 250 bar
804 582
Pressure gauge, 0-5000psi (0-345bar) connecting rear ¼″ NPT(A), Scale PSI, Kpa
Fitting, Pump inlet with Gardena-thread
15B 910
Spray tip type ″Q″
805 539
00035* (0° red ),
805 540
15035* (15° yellow )
805 541
25035* (25° green )
805 542
40035* (40° white)
805 543
0004 (0° red ),
805 544
1504 (15° yellow )
Manual:
805 545
2504 (25° green )
805 546
4004 (40° white)
308 514
805 547
00045 (0° red ),
805 548
15045 (15° yellow )
805 549
25045 (25° green )
805 550
40045 (40° white)
805 566
40065 (40° white)
244 769
Box with Spray tip type Q, incl. 805 539, 805 540, 805 541, 805 542
800 708
Spray tip type Q, incl. 805 543, 805 544, 805 545, 805 546
Spray tip type ″M″
805 312
tip type ″M″, 0°
805 313
805 314
805 315
Manual:
805 316
tip type ″M″, 0°,
805 317
308 514
805 318
805 319
805 320
805 634
805 312
805 316
805 321
802 851
118 125
244 783
Spray nozzle for chemical injector (black)
Spray tip type ″M″ 0004, ¼ NPT(m), (use in sand jet set) 1,19 mm, round pattern
Spray tip type ″M″ 0045, ¼ NPT(m), (use in sand jet set) 1,27 mm, round pattern
Spray tip type ″M″ 1505, ¼ NPT(m) 1,35 mm, 15°
Hand grip fit to Hydra-Clean lance
High pressure hose 9,1m, 7,9mm Ø inside , 241bar, 1 x M22x1,5 (I) + ⅜″ nipple for G-Force 2525
High pressure hose 15m, ⅜″, 280bar, blue synthetic rubber with red ends, quick disconnect coupling
and a male fitting
309 912
308 532
309 368
308 511
308 511
307 010
309 918
308 544
1,11 mm
1,19 mm
1,27 mm
1,19mm
1,27 mm
308 514
801 090
Male fitting, CS, galvanized, ¼″ NPT(f) (screw-in nozzle support type ″M″)
197 428
Male fitting, CS, galvanized ⅜″ NPT(f)
801 568
Male fitting, SST, ⅜″ NPT(f)
801 091
Male fitting, CS, ¼″ NPT(m)
801 009
Quick disconnect coupling, brass/SST, ¼″ NPT(f), (Buna-N, O-Ring 154 594)
803 156
Quick disconnect coupling, SST, ¼″ NPT(f),
(Buna N, O-Ring 154 594)
801 569
Quick disconnect coupling, brass/SST, ⅜″ NPT(f), (Buna-N, O-Ring 156 082)
803 157
Quick disconnect coupling, SST, ⅜″ NPT(f),
(Buna-N, O-Ring 156 082)
Quick disconnect, 3/8“ to M22x1,5 to connect two hoses 118 125 (9,1m) G-Force 2525 & 2626
249 101
801 134† Lance, CS 80 cm, ¼″
803 499
Lanze, aluminium 150 cm, ¼″
803 500†
801 558
Lance, SST 80 cm, ¼″
Lanze, aluminium 240 cm, ¼″
† = incl. Quick Disconnect and male fitting
207 299
Lance, brass alloy 25 cm ¼″, straight with tip 103 921 for HC gun 208 008
307 010
205 910
Lance, brass alloy 120 cm ¼″, curved with tip 103 921 for HC gun 208 008
205 911
Lance, brass alloy 180 cm ¼″, curved with tip 103 921 for HC gun 208 008
Hydra-Clean nozzle type
160 959 4001, 40°, Ø 0,66 mm
160 970
15015,15°, Ø 0,79 mm
160 958 4002, 40°, Ø 0,91 mm
160 964 2503, 25°, Ø 1,09 mm
160 963
2506, 25°, Ø 1,57 mm
103 921 4006, 40°, Ø 1,57 mm
165 090 4010, 40°, Ø 1,98 mm
17.02.2009 10:25
4-5
HUSKY DIAPHRAGM PUMPS 205 / 307
Husky 205
D01 _ _ _ Rep Kit (fluid)
238 853 Air Valve Service Kit
Air inlet: ¼” npt (f)
Fluid inlet & outlet: ¼”
Max. 82°C
46cm³ per cycle
1,15 litre / 25 cycles (max. recommend)
Max. air consumption 252dm³/min
Max. viscosity: 500 centipoise
+ Husky 205 only mounted like
drawing, use 90º bracket !!
Husky 307
Dual Inlet - Outlet
Husky 307
248 167
248 168
248 169
248 170
Fluid inlet & outlet 3/8”
Max. 65,5°C
79cm³ (76cm³ PTFE) per cycle
1,58 litre / 25 cycles (max. recommend)
Max. air consumption: 155dm³/min
Max. viscosity: 500 centipoise
224 834 (307)
235 643 (307)
239 142 (205)
239 143 (205)
239 144 (205)
235 500 (307)
235 502 (307)
Husky 307
237 210
237 211
241 810 (205)
224 835
(205 + 307)
19.02.2009 11:55
5-1
HUSKY DIAPHRAGM PUMPS 205 / 307
Husky 205 1/4“ inlet
manual: 308 652
Part No.
D11 021
D12 091
D15 0A1
D11 026
D12 096
D15 0A6
Description
Husky 205 (Acetal) BSPT
Husky 205 (Polyp.) BSPT
Husky 205 (Kynar.) BSPT
Husky 205 (Acetal) BSPT
Husky 205 (Polyp.) BSPT
Husky 205 (Kynar.) BSPT
D21 021
D22 091
D25 0A1
D21 026
D22 096
D25 0A6
Husky 205 (Acetal) Remote
Husky 205 (Polyp.) Remote
Husky 205 (Kynar) Remote
Husky 205 (Acetal) Remote
Husky 205 (Polyp.) Remote
Husky 205 (Kynar) Remote
Seat
0
(no individual seat)
Ball
AC-valve
Polyp-valve
Kynar-valve
AC-valve
Polyp-valve
Kynar-valve
2
9
A
2
9
A
Diaphragm
PTFE
1
PTFE
1
PTFE
1
Santoprene 6
Santoprene 6
Santoprene 6
0
(no individual seat)
AC-valve
Polyp-valve
Kynar-valve
AC-valve
Polyp-valve
Kynar-valve
2
9
A
2
9
A
PTFE
PTFE
PTFE
Santoprene
Santoprene
Santoprene
D01 xxx: Rep- kit Husky 205 / fluid side
238 853 Repair kit air valve Husky 205
Husky 307 3/8“ inlet
manual: 308 553
D3A 211
D3A 266
D3A 255
D3A 277
D3A 311
D3A 331
D3A 336
D3B 255
D3B 311
D3B 331
D3B 366
D3B 911
D3B 955
D3B 966
D3B 977
Part-No.
NPT
D31 211
D31 266
D31 255
D31 277
D31 311
D31 331
D31 336
D32 255
D32 311
D32 331
D32 366
D32 911
D32 955
D32 966
D32 977
248 167
248 168
248 169
248 170
Husky 307 Acetal (D31 277) with dual inlet - outlet ⅜″ NPT(F)
Husky 307 Acetal (D31 255) with dual inlet - outlet ⅜″ NPT(F)
Husky 307 Polyp. (D32 255) with dual inlet - outlet ⅜″ NPT(F)
Husky 307 Polyp. (D32 977) with dual inlet - outlet ⅜″ NPT(F)
Part No.
BSPT
Description
Husky 307 (Acetal)
Husky 307 (Acetal)
Husky 307 (Acetal)
Husky 307 (Acetal)
Husky 307 (Acetal)
Husky 307 (Acetal)
Husky 307 (Acetal)
Husky 307 (Polyp.)
Husky 307 (Polyp.)
Husky 307 (Polyp.)
Husky 307 (Polyp.)
Husky 307 (Polyp.)
Husky 307 (Polyp.)
Husky 307 (Polyp.)
Husky 307 (Polyp.)
Seat
Acetal
Acetal
Acetal
Acetal
SST 1.4401
SST 1.4401
SST 1.4401
Acetal
SST 1.4401
SST 1.4401
SST 1.4401
Polypropylen
Polypropylen
Polypropylen
Polypropylen
D03 xxx: Rep- kit Husky 307 / fluid side
Accessories
237 210
237 211
239 142
239 143
239 144
235 500
235 502
224 834
235 643
241 810
224 835
113 497
Ball
2
2
2
2
3
3
3
2
3
3
3
9
9
9
9
PTFE
Santoprene
Hytrel
Buna-N
PTFE
SST 1.4401
SST 1.4401
Hytrel
PTFE
SST 1.4401
Santoprene
PTFE
Hytrel
Santoprene
Buna-N
Diaphragm
1
6
5
7
1
3
3
5
1
3
6
1
5
6
7
PTFE
Santoprene
Hytrel
Buna-N
PTFE
PTFE
Santoprene
Hytrel
PTFE
PTFE
Santoprene
PTFE
Hytrel
Santoprene
Buna-N
1
6
5
7
1
1
6
5
1
1
6
1
5
6
7
308 553
308 439
239 952 Repair kit air valve Husky 307
Dual inlet - outlet Husky 307 Polypropylene ( kit for inlet and outlet)
Dual inlet - outlet Husky 307 Acetal
(kit for inlet and outlet)
Suction kit 200 L – Polypropylene 1,8 m (⅜″) for Husky 205 with bunghole adapter (188 182)
Suction kit 200 L – Acetal
1,8 m (⅜″) for Husky 205 with bunghole adapter (188 181)
Suction kit 200 L – Kynar
1,8 m (⅜″) for Husky 205 with bunghole adapter 191 054)
Suction kit 200 L – Acetal
Suction kit 200 L – Polypropylene 1,8 m (⅜″) for Husky 307 with bunghole adapter (188 182)
Suction kit200 L – Acetal
Inlet filter kit, PA (Nylon) ⅜″
Bracket incl. 4 screws to fix the pump (is always delivered with the Husky 205)
Bracket for Husky 205 /307 incl. 4 screws to fix the pump
Relief valve, inlet ⅜″ NPT(m), outlet ⅜″ NPT(f), pressure to open 10,3 – 12,4 bar
19.02.2009 11:55
1
1
1
6
6
6
5-2
308 439
308 439
308 230
308 652
308 553
308 403
HUSKY DIAPHRAGM PUMPS 515 acetal / polypropylene
¾“
½“
Husky 515
Ball 3/4“ (19,05mm)
108 639
103 462
112 945
112 946
108 944
112 959
Fluid inlet & outlet: ½ “ or / ¾” NPT or BSPT
Max. 65,5°C
150cm³ per cycle
3,75 litre / 25 cycles (max recommend)
Max viscosity: 5000 centipoise
PTFE
SST 316
TPE-(Hytrel)
Santroprene
Buna N
Viton
Husky 515
Dual inlet
Dual
inlet - and outlet
243 669
248 171
248 172
248 173
248 174
Dual inlet - and outlet
manifold
241 406 counter, contain Pos. 1-4
241 405 sensor, contain Pos. 1-2
Pos.:
1
2
3
4
Part-No.:
114 481
241 125
115 047
194 540
Description:
Sensor
Magnet
Counter
Bracket
Part:
1
1
1
1
224 835
239 754 Duck bill - set
19/02/09 11:55
5-3
HUSKY DIAPHRAGM PUMPS 515 acetal / polypropylene
Manual: 308 981
Ratio 1:1
Standard BSPT thread
in
(D51-xxx) NPT thread,
under (Ex St.) for Remote control
Part No.
Description
Seat
Ball
Diaphragm
BSPT
(NPT) (Remote-BSPT)
D5A 211 (D51 ) (D4A)
Husky 515 (Acetal) ½ or ¾
Acetal
2 PTFE
1 PTFE
D5A 255 (D51 ) (D4A)
Acetal
2 Hytrel
5 Hytrel
D5A 266 (D51 ) (D4A)
Acetal
2 Santoprene
6 Santoprene
D5A 275 (D51 ) (D4A)
Acetal
2 Buna-N
7 Hytrel
D5A 277 (D51 ) (D4A)
Acetal
2 Buna-N
7 Buna-N
D5A 311 (D51 ) (D4A)
SST 1.4401
3 PTFE
1 PTFE
D5A 331 (D51 ) (D4A)
SST 1.4401
3 SST 1.4401
3 PTFE
D5A 977 (D51 ) (D4A)
Polypropylene
9 Buna-N
7 Buna-N
D5A 911 (D51 ) (D4A)
Polypropylene
9 PTFE
1 PTFE
D5A D05 (D51 ) (D4A)
Duck bill
D Null
0 Hytrel
D5B 211 (D52 ) (D4B)
Husky 515 (Polyp.) ½ or ¾
Acetal
2 PTFE
1 PTFE
D5B 277 (D52 ) (D4B)
Acetal
2 Buna-N
7 Buna-N
D5B 311 (D52 ) (D4B)
SST
3 PTFE
1 PTFE
D5B 331 (D52 ) (D4B)
SST
3 SST 1.4401
3 PTFE
D5B 336 (D52 ) (D4B)
SST
3 SST 1.4401
3 Santoprene
D5B 911 (D52 ) (D4B)
Polypropylene
9 PTFE
9 PTFE
D5B 915 (D52 ) (D4B)
Polypropylene
9 PTFE
9 Hytrel
D5B 916 (D52 ) (D4B)
Polypropylene
9 PTFE
9 Santoprene
D5B 918 (D52 ) (D4B)
Polypropylene
9 PTFE
9 Viton
D5B 955 (D52 ) (D4B)
Polypropylene
9 Hytrel
9 Hytrel
D5B 961 (D52 ) (D4B)
Polypropylene
9 Santoprene
9 PTFE
D5B 966 (D52 ) (D4B)
Polypropylene
9 Santoprene
9 Santoprene
D5B 977 (D52 ) (D4B)
Polypropylene
9 Buna-N
9 Buna-N
D5B 988 (D52 ) (D4B)
Polypropylene
9 Viton
9 Viton
D5B 336 (D52 ) (D4B)
SST 1.4401
3 SST 1.4401
3 Santoprene
D5B D07 (D52 )*
Duck bill
D Null
D Buna-N
D5B D05 (D55) *
Husky 515 (Kynar) ½ or ¾
Duck bill
D Null
D Hytrel
D5E A11 (D55 ) (D4E)
A PTFE
Kynar
A PTFE
D5E A88 (D55 ) (D4E)
Kynar
A Viton
A Viton
*= for pumps with duck bill valve, the fluid connections are reserved, inlet above, outlet below
D05 xxx: Rep- kit Husky 515 – 716 / fluid side
515 pumps
241 564
241 565
1
5
6
5
7
1
1
7
1
5
1
7
1
1
6
1
5
6
8
5
1
6
7
8
4
7
5
1
8
241 657 Rep- kit air valve Husky 515 - 716
with¾″ NPT(F) suction connection underneath for drums and special applications, outlet central or side
Husky 515 (Acetal) ¾″ NPT(F)
Acetal
PTFE
PTFE
308 981
Husky 515 (Polyp.l) ¾” NPT(F)
Polypropylene
PTFE
PTFE
308 981
Husky 515 separate inlet ¾″NPT(F)
243 669
Husky 515 (Acetal),
Acetal
Buna-N
Buna-N
Husky 515 separate inlet and outlet ¾″NPT(F)
248 171
Husky 515 Acetal (D51 277)
248 172
Husky 515 Acetal (D51 255)
248 173
Husky 515 Polypropylene (D52 977)
248 174
Husky 515 Polypropylene (D52 955)
Acetal
Acetal
Polypropylene
Polypropylene
Buna-N
Hytrel
Buna-N
Hytrel
Buna-N
Hytrel
Buna-N
Hytrel
Accessories:
241 405
Sensor kit (sensor and magnet)
241 406
Counter , digital with battery and sensor
241 240
Split inlet, polypropylene for 515
241 243
Split outlet, polypropylene for 515
241 241
Split inlet, acetal for 515
Split outlet, acetal for 515
241 244
241 242
Split inlet, kynar for 515
241 245
Split outlet, kynar for 515
195 265
Car wash controller to operate D4x Pumps, 120 Volt
224 835
Wall bracket for husky 515 incl. 4 screws for mounting
239 754
Duck bill valve set, contains 4 valves and spacers (Polyurethane-Delrin) and O-rings
15A 574
Duck bill valve set, contains 4 valves and spacers (Buna-N-Delrin) and O-rings Duck bill, 4
113 497
Pressure control valve, inlet ⅜″ NPT(m), outlet ⅜″ NPT(f), opening pressure 10,3 – 12,4 bar
233 045
Suction kit 200 L with bracket, polypropylene adapter 233-073 and tube 196-096
233 046
Suction kit 200 L with bracket, acetal adapter 233-074 and tube 196-095
19.02.2009
5-4
309 204
308 981
308 951
308 951
308 951
308 951
308 951
308 951
309 004
309 009
308 403
309 116
HUSKY DIAPHRAGM PUMPS 515 Acetal / PP - 716 Alu / SST
Husky 515
Husky 716
Husky 515-716 drum pump kits & packages
233 045 PP
233 046 Acetal / Alu
233 047 Acetal / SST
233 048 SST 90°
Max. 65,5°C
150cm³ per cycle
3,75 litre / 25 cycles (max recommend)
Max viscosity: 5000 centipoise
only for
NPT !!!
Variable
from 66 to 130 mm
Suction set
with mounting
plate for
pumps with
inlet
below/central
Husky NPT
with suction drum kit
Suction drum kit
NPT
233 051
233 052
233 053
233 054
233 055
233 056
233 057
233 045 (PP)
233 046 (Acetal - Alu)
233 047 (Acetal - SST)
233 048 (90°) (SST)
(241 565+233 045)
(241 564+233 047)
(241 564+233 046)
(243 305+233 046)
(243 306+233 046)
(243 307+233 046)
(D54 311+233 048)
Husky 515 – 716 drum pump NPT
241 564 (515 AC
241 565 (515 PP
243 305 (716 AL
243 306 (716 AL
243 307 (716 AL
D54 311 (716 SS
19/02/09 11:55
AC-PTFE-PTFE)
PP-PTFE-PTFE)
AC-SP-SP)
AC-BN-BN)
AC-PTFE-PTFE)
SS-PTFE-PTFE)
5-5
Variable
from
800 to 864 mm
HUSKY DIAPHRAGM PUMPS 716 Alu / SST
Part No.
BSPT
D5C 211
D5C 215
D5C 255
D5C 266
D5C 277
D5C 288
D5C 311
D5C 315
D5C 331
D5C 335
D5C 336
D5C 337
D5C 338
D5C 355
D5C 366
D5C 377
D5C 388
D5C 911
D5C 955
D5C 966
D5C 977
D5C 237
D5C D05
D5C D07
D5D 211
D5D 255
D5D 311
D5D 331
D5D 335
D5D 336
D5D 377
D5D 381
D5D 388
D5D 911
(NPT)
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D53 )
(D54 )
(D54 )
(D54 )
(D54 )
(D54 )
(D54 )
(D54 )
(D54 )
(D54 )
(D54 )
Description
(Remote.-BSPT)
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
(D4C ) Husky 716 (Alu) ¾ ″
−
Husky 716 (Alu) ¾ ″
−
(D4D ) Husky 716 (SST) ¾″
Seat
Acetal
Acetal
Acetal
Acetal
Acetal
Acetal
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Acetal
Duck bill valve
Duck bill valve
Acetal
Acetal
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
Polypropylene
Manual: 308 981
Ball
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
9
9
9
9
2
2
2
3
3
3
3
3
3
3
9
PTFE
PTFE
Hytrel
Santoprene
Buna-N
Viton
PTFE
PTFE
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
SST 1.4401
Hytrel
Santoprene
Buna-N
Viton
PTFE
Hytrel
Santoprene
Buna-N
SST 1.4401
−
−
PTFE
Hytrel
PTFE
SST 1.4401
SST 1.4401
SST 1.4401
Buna-N
Viton
Viton
PTFE
Diaphragm
1
1
5
6
7
8
1
1
3
3
3
3
3
5
6
7
8
1
5
6
7
3
1
5
1
3
3
3
7
8
8
1
PTFE
Hytrel
Hytrel
Santoprene
Buna-N
Viton
PTFE
Hytrel
PTFE
Hytrel
Santoprene
Buna-N
Viton
Hytrel
Santoprene
Buna-N
Viton
PTFE
Hytrel
Santoprene
Buna-N
Buna-N
Hytrel
Buna-N
PTFE
Hytrel
PTFE
PTFE
Hytrel
Santoprene
Buna-N
PTFE
Viton
PTFE
1
5
5
6
7
8
1
5
1
5
6
7
8
5
6
7
8
1
5
6
7
7
5
7
1
5
1
1
5
6
7
1
8
1
716 pump with ¾″NPT(f) suction below for drums and special use, complete kit see 5-5 (page above)
243 305 (716 Alu) 266
Acetal
Santoprene
Santoprene 308 981
243 306 (716 Alu) 277
Acetal
Buna-N
Buna-N
308 981
243 307 (716 Alu) 211
Acetal
PTFE
PTFE
308 981
246 485 (716 Alu) 431
SST 1.4401
SST 316
PTFE
308 981
241 906
Husky 716 (Alu) ¾″ NPT(f) with Buna-N diaphragm and ball, for oil- systems
241 631
Air motor / control valve refitting kit Husky 715 and Husky 716 metal
Accessories
233 047
Suction kit 200L with bracket, Acetal Adapter 233-074 and SST suction tube 196-094
233 048
Suction kit 200L with bracket, SST Adapter 233-076 and SST suction tube 196-094
190 246
Inlet manifold vertical, aluminium ¾″ NPT(f) inlet thread
241 405
Switching set (sensor and magnet)
241 406
Counter set, digital with battery and switching set
241 657
Repait set, air valve
195 265
Car wash controller to operate D4x Pumps, 120 Volt
224 835
Wall bracket Husky 716 incl. 4 screws for fix the pump
239 754
Duck bill valve set, contains 4 valves and spacers (Polyurethane-Delrin) and O-rings
15A 574
Duck bill valve set, contains 4 valves and spacers (Buna-N-Delrin) and O-rings
111 453
Ceramic ball Husky 515/716 Ø ¾“ (4 pieces are used )
113 497
Pressure control valve, inlet ⅜″ NPT(m), outlet ⅜″ NPT(f), opening pressure 10,3–12,4 bar
19.02.2009
5-6
308 573
308 983
309 116
309 004
309 009
308 403
HUSKY DIAPHRAGM PUMPS 1040 Alu / SST
Husky 1040 (Alu)
Husky 1040 (SST)
A = 1“ NPT
C = 108 mm
D = 77,7 mm
Husky 1040 (Kynar)
Husky 1040
Ball 1-1/4“ (31,75mm)
Inlet / outlet 1” or flange
112 088 PTFE
112 254 acetal
103 869 SST 316
102 973 SST 440
112 089 TPE-(Hytrel)
112 092 Santroprene
15B 487 Viton
114 751 Geolast
236 273 Air Valve Service Kit Alu centre housing
255 061 Air Valve Service Kit SST centre housing
Air inlet: ½” npt (f)
Max. 65,5°C
570cm³ per cycle
14,2litre / 25 cycles (max recommend)
Max. air consumption: 1700 dm³/min
Max viscosity: 10.000 centipoise
Husky 1040
Fitting 1“-3/4“
202 965
suction hose
¾“ NPT 1,8m
214 961
217 072
1/2“ in-outlet
0 – 17,5bar
107 409
1“ – ¾“ 90°
Bracket 189 233
246 419
suction tube with
intake valve
104 266
Air Regulator
0 – 17,5 bar
½“ npt (f)
19/02/09 11:55
5-7
HUSKY DIAPHRAGM PUMPS 1040 PP/AC/KY/AL/ SST
Husky 1040 pump “flange“ Acetal / Polypropylene / Kynar®
Husky
D (all husky pumps)
center
seat
ball
7 Standard - Alu
1 Acetal
1
−
1
PTFE
1 PTFE
8 Remote - Alu
2 Polypropylene
2 Acetal
2
Acetal
2
−
R Stand.- SST
3
3 316 SST
3
316 SST
3
−
S Remote- SST
4
4 17-4 SST
4
440 SST
4
−
5 Kynar
5
Hytrel®
5
Hytrel®
5 Hytrel®
6
−
6
Santoprene
6 Santoprene
7 Buna-N
7
Buna-N
7 Buna-N
8 Viton®
8
Viton®
9 Polypropylene
9
−
9
−
A Kynar®
A
−
A
−
G
G
Geolast®
G Geolast®
Husky 1040 pump 1″
Husky
D (all husky pumps)
fluid section
Manual 308 443
diaphragm
Aluminium and SST
center
7 Standard - Alu
−
fluid section
seat
1
−
ball
1 PTFE
8 Viton®
Manual 308 479
diaphragm
1
−
1 PTFE
8 Remote - Alu
2
−
2 Acetal
2 Acetal
2
−
R Stand.- SST
3 (Aluminium – NPT)
3 316 SST
3 316 SST
3
−
S Remote- SST
4 (SST − NPT)*
4 17-4 SST
4 440C SST
4
−
C (Aluminium − BSPT)
5 Hytrel®
5 Hytrel®
5 Hytrel®
D (SST− BSPT)*
6 Santoprene®
6 Santoprene®
6 Santoprene®
7 Buna-N
7 Buna-N
7 Buna-N
8 Viton®
8 Viton®
8 Viton®
9 Polypropylene
9
−
9
−
A Kynar®
A
−
A
−
G Geolast®
G Geolast®
G Geolast®
Husky 1040 special
240 624
240 623
236 265
236 267
Husky 1040 SST
Husky 1040 SST
Husky 1040 ALU
Husky 1040 ALU
max 2,8bar
- BSP manifold 1,5”
- BSP manifold 1,5” and tri-clamp adapter
- evacuation pump
- Fuel dispense pump with pressure relief kit
seat – ball - diaphragms
SST 1.4401- PTFE - PTFE
SST 1.4401- PTFE - PTFE
Hytrel – Acetal - Hytrel
Hytrel – Acetal - Hytrel
308 788
308 326
Accessories
189 233
239 005
239 008
239 009
113 497
238 428
236 452
246 450
Wall bracket, bare
Flange kit polypropylene , with SST-screws and PTFE gasket
Flange kit acetal
, with SST-screws and PTFE gasket
Flange kit Kynar®
Pressure relief valve, inlet ⅜″ NPT(f), outlet ⅜″ NPT(m), opening pressure 10,3 – 12,4 bar
Pressure relief kit 3,5 bar (working pressure 2,8 bar)
Rubber foot kit, foot Ø 31,75 mm
Conversion kit ( SST), rebuild ALU centre to SST centre
19.02.2009
5-8
308 403
308 403
309 643
HUSKY DIAPHRAGM PUMPS 1590 SST/ Kynar®
Husky 1590 (SST)
Husky 1590 (Kynar)
Ball 1-3/4“ (44,45mm)
Husky 1590
Inlet / outlet 1-1/2” or flange
D0B _ _ _
D0C _ _ _
236 273
255 061
112 419 PTFE
112 423 acetal
112 420 SST 440
112 831 TPE-(Hytrel)
112 421 Santroprene
15B 490 Buma-N
15B 489 Viton
114 752 Geolast
Rep Kit (fluid) ALU and SST
Rep Kit (fluid) Polypropylene & Kynar
Air Valve Service Kit Alu centre housing
Air Valve Service Kit SST centre housing
Max. 65,5°C
1960cm³ (1,96 Litre) per cycle
49 litre / 25 cycles (max recommend)
217 073
¾“ in-outlet
0 – 17,5bar
206 197
Air Regulator
working pressure 0 - 9 bar
3/8” npt (f)
19/02/09 11:55
A = 1-1/2“ NPT
C = 127 mm
D = 96,5 mm
5-9
HUSKY DIAPHRAGM PUMPS 1590 SST / ALU / PP / Kynar®
Husky 1590 pump
Husky
D (all husky pumps)
Polypropylene and Kynar®
center
fluid section
B Standard - Alu
1
-
−
1 PTFE
1 PTFE
-
2 Polypropylene
2
2 Acetal
2
−
T Stand.- SST
3
-
3 316 SST
3
-
3
−
U Remote- SST
4
-
4 17-4 SST
4 440 SST
4
−
5 Hytrel®
5 Hytrel®
5 Hytrel®
6 Santroprene®
6 Santroprene®
6 Santroprene®
7 Buna-N
7
Buna-N
7 Buna-N
8 Viton®
8
Viton®
8 Viton®
9 Polypropylene
9
−
9
−
A Kynar®
A
−
A
−
G
G
Geolast®
G Geolast®
Husky 1590 pump
Husky
1
C Remote - Alu
5 Kynar
D (all husky pumps)
Manual 308 549
ball
diaphragm
seat
−
ALU and SST
center
fluid section
Manual 308 441
ball
diaphragm
seat
B Standard - Alu
1
-
1
−
1 PTFE
1 PTFE
C Remote - Alu
2
-
2
-
2 Acetal
2
−
T Stand.- SST
3
Alu - NPT
3 316 SST
3
-
3
−
U Remote- SST
4
SST - NPT
4 17-4 SST
4 440 SST
4
−
C
Alu - BSPT
5 Hytrel®
5 Hytrel®
5 Hytrel®
D
SST - BSPT
6 Santroprene®
6 Santroprene®
6 Santroprene®
7 Buna-N
7 Buna-N
7 Buna-N
8 Viton®
8 Viton®
8 Viton®
9 Polypropylene
9
−
9
−
A Kynar®
A
−
A
−
G Geolast®
G Geolast®
G Geolast®
Accessories:
239 006
239 010
15B 252
246 451
308 403
Flange kit Kynar®
308 403
Rubber foot Ø 38 mm, ⅜″-16UNC (m) x ⅜″-UNC(f), (Nut 112 913 & Spacer 112 914 are not included)
309 643
For FDA see manual 309 528
19.02.2009
5-10
Husky 2150 (Kynar)
Husky 2150 (SST)
Alu.-BSP-exten.
Alu.-NPT-exten.
(234 019 Set)
Husky 2150
Inlet / outlet 2” or flange
D0F _ _ _
D0G _ _ _
236 273
255 061
Rep Kit (fluid) ALU and SST
Rep Kit (fluid) Polypropylene & Kynar
Air Valve Service Kit Alu centre housing
Air Valve Service Kit SST centre housing
Max. 65,5°C
3900cm³ (3,9 Litre) per cycle
97 litre / 25 cycles (max recommend)
217 073
¾“ in-outlet
0 – 17,5bar
A = 1-1/2“ NPT
C = 152,4 mm
D = 119,4 mm
207 755
Air Regulator
working pressure 0 - 9 bar
3/4” npt (f)
19/02/09 11:55
5-11
Husky 2150 pump
Husky
D (all husky pumps)
Polypropylene and Kynar®
center
fluid section
F Standard - Alu
1
G Remote - Alu
V Stand.- SST
-
Husky
D (all husky pumps)
seat
1
−
1 PTFE
1 PTFE
2 Polypropylene
2
-
2 Acetal
2
−
3
-
3 316 SST
3
-
3
−
4
-
4 17-4 SST
4 440 SST
4
−
5 Hytrel®
5 Hytrel®
5 Hytrel®
6 Santroprene®
6 Santroprene®
6 Santroprene®
7 Buna-N
7
Buna-N
7 Buna-N
8 Viton®
8
Viton®
8 Viton®
9 Polypropylene
9
−
9
−
A Kynar®
A
−
A
−
G
G
Geolast®
G Geolast®
5 Kynar
Husky 2150 pump
Manual 308 550
ball
diaphragm
Geolast®
ALU and SST
center
fluid section
Manual 308 368
ball
diaphragm
seat
F Standard - Alu
1
-
1
−
1 PTFE
1 PTFE
G Remote - Alu
2
-
2
-
2 Acetal
2
−
V Stand.- SST
3
Alu - NPT
3 316 SST
3
-
3
−
4
SST - NPT
4 17-4 SST
4 440 SST
4
−
6
Cast iron NPT
5 Hytrel®
5 Hytrel®
5 Hytrel®
C
Alu - BSPT
6 Santroprene®
6 Santroprene®
6 Santroprene®
D
SST - BSPT
7 Buna-N
7 Buna-N
7 Buna-N
F
Cast iron BSPT
8 Viton®
8 Viton®
8 Viton®
9 Polypropylene
9
−
9
−
A Kynar®
A
−
A
−
G Geolast®
G Geolast®
G Alu - BSPT
extension
H Alu - NPT
extension
G Geolast®
Accessories:
239 007
239 011
15B 252
246 452
234 019
308 403
Flange kit Kynar®
308 403
Rubber foot Ø 38 mm, ⅜″-16UNC (m) x ⅜″-UNC(f), (Nut 112 913 & Spacer 112 914 are not included)
309 643
Manifold extension kit Husky 2150
19.02.2009
5-12
HUSKY SANITARY SERIES − FDA − DIAPHRAGM
Husky 1040
0,57 Litre/ Cycles
1-1/2 “ Sanitary Flange
Air inlet 1/2“ NPT(F)
Max viscosity: 10.000 centipoises
Husky 1590
1,96 Litre/ Cycles
2 “ Sanitary Flange
Husky 2150
3,67 Litre/ Cycles
2-1/2 “ Sanitary Flange
19/02/09 11:55
5-13
HUSKY SANITARY SERIES − FDA − DIAPHRAGM
Husky 1040 FDA SST Sanitary pump,
Manual: 311879
Ball
Diaphragm
Pump
Pump size
FD
1
1
316 STT with
PTFE O-Ring
1
PTFE
1
PTFE
1 = 1040
2
316 SST with
EPDM O-Ring
2
Santoprene®
2
Santoprene®
3
Neoprene
SST core
3
PTFE
heavy-duty
( Sanitary Series)
Seat
Available configuration Husky 1040 FDA:
Repair Kit 1040 FDA
FD1111, FD1122, FD1211, FD1222, FD1113,
FD1213, FD1132, FD1232
Seat
1
2
FK1
316 SST with PTFE O-Ring
316 SST with EPDM O-Ring
Available Husky 1040 Rep Kit:
Ball
Diaphragm
PTFE
PTFE
1
1
Santoprene®
Santoprene®
2
2
Neoprene
PTFE h-duty
3
3
FK1111, FK1122, FK1211, FK1222, FK1113,
FK1213, FK1132, FK1232
Manual: 311879
Ball
Diaphragm
Pump
Pump size
Seat
FD
2
1
316 STT with
PTFE O-Ring
1
PTFE
1
PTFE
( Sanitary Serie)
2 = 1590
2
316 SST with
EPDM O-Ring
2
Santoprene®
2
Santoprene®
3
Neoprene
SST core
3
PTFE
heavy-duty
Repair Kit 1590 FDA
FD2111, FD2122, FD2211, FD2222,FD2113,
FD2213, FD2132, FD2232
Seat
1
2
FK2
Ball
Diaphragm
PTFE
PTFE
1
1
Santoprene®
Santoprene®
2
2
Neoprene
PTFE h-duty
3
3
FK2111, FK2122, FK2211, FK 2222, FK2113,
FK2213, FK2132, FK2232
Manual: 311879
Ball
Diaphragm
Pump
Pump size
Seat
FD
3
1
316 SST with
PTFE O-Ring
1
PTFE
1
PTFE
( Sanitary Serie)
3 = 2150
2
316 SST with
EPDM O-Ring
2
Santoprene®
2
Santoprene®
3
Neoprene
SST core
3
PTFE
heavy-duty
Repair Kit 2150 FDA
FK3
FK3
Seat
1
2
19.02.2009
FD3111, FD3122, FD3211, FD3222, FD3113,
FD3213, FD3132, FD3232
Ball
Diaphragm
PTFE
PTFE
1
1
Santoprene®
Santoprene®
2
2
Neoprene
PTFE h-duty
3
3
FK3111, FK3122, FK3211, FK 3222, FK3113,
FK3213, FK3132, FK3232
5-14
HUSKY 3150 SANITARY SERIES − DIAPHRAGM
Husky 3150 SA
Husky 3150 SB Ball Check pump
Husky 3150 SF Flapper Check pump
Sanitary
Pump
S (for all
pumps)
Pumpen
Configuration
Inlet and
Outlet
A (3A approved)
1 (1½“x1½“)
B Ball Check
F Flapper Check
2
3
4
5
P
(2“ x 2“)
(3“ x 3“)
(4“ x 4“)
(3“ x 2“)
none
Diaphragm
A 3A approved
EPDM
6 Santoprene
7 Buna-N
8 Viton
Check Valve
Material
manual: 310 622
Leak Detector
Pump Stand
A 3A approved A Leckage Detektor
PTFE
and Pumpenständer
6 Santoprene
1 Pump Stand
7 Buna-N
3 None
8 Viton
F Flapper
Accessories:
Pump conversion Kit:
15D 989 Conversion Kit for rebuild ball to flapper valve
15E 285 Conversion Kit for rebuild flatter to ball valve, without balls
D0F 010 PTFE ball Kit
D0F 060 Santoprene ball Kit
D0F 070 Buna-N ball Kit
Leak Detector:
15D 990 Leak detector kit
D0F 080 Viton ball Kit
Pump Inlet and outlet T-fitting 234 532
234 534
234 535
234 536
Note:
Max. size pumpable solids:
Husky 3150 SA
25,4 mm
Husky 3150 SB
25,4 mm
Husky 3150 SF
63,5 mm
19/02/09 11:55
3″
3″
3″
3″
x
x
x
x
3″
2″
4″
1,5″
Max . working temperature diaphragm
PTFE
104°C
Santoprene
82°C
Buna-N
82°C
Viton
121°C
5-15
HUSKY 3275 Aluminium DIAPHRAGM
Husky 3275
7,6 Litre/ Cycles
3 “ Sanitary Flange
Air inlet 3/4“ npt (f)
Max viscosity: 25.000 centipois
D0K xxx: Repair kit 3275, fluid side
238 765 Repair Kit Air valve
Part No.
Description
Seat
Ball
DK3 311
DK3 316
DK3 366
DK3 515
DK3 525
DK3 565
DK3 616
DK3 666
DK3 G1G
DK3 GGG
Husky 3275 (Alu) Flange
SST 1.4401
SST 1.4401
SST 1.4401
Hytrel
Hytrel
Hytrel
Santoprene
Santoprene
Geolast
Geolast
PTFE
PTFE
Santoprene
PTFE
Acetal
Santoprene
PTFE
Santoprene
PTFE
Geolast
19.02.2009
5-16
Manual: 308 639
Diaphragm
PTFE
Santoprene
Santoprene
Hytrel
Hytrel
Hytrel
Santoprene
Santoprene
Geolast
Geolast
HUSKY DIAPHRAGMS PUMP UNITS
232 080
232 082
232 083
238 859
238 860
233 051 to
233 057
231 418
231 419
232 092
248 275
248 276
248 277
248 278
223 695
224 763
224 701
289 353
289 354
Part No.
Description
Accessory
223 695
Husky 716, Evacuation system portable
suction hose, 4 lance
224 763
Husky 716, FAS-VAC system without drum
fit for 120 lbs/60L drum
224 701
Husky 716, FAS-VAC system without drum
fit for 200L drum-cart Model 111 470
233 051
Husky 515, PP-Pump / seat PP, ball + diaphragm PTFE, suction tube 200L Polyp.
233 052
Husky 515, AC-Pump / seat AC, ball + diaphragm PTFE, suction tube 200L SST
233 053
Husky 515, AC-Pump / seat AC, ball + diaphragm PTFE, suction tube 200L Alu
233 054
Husky 716, Alu-Pump / seat AC, ball + diaphragm Santoprene, suction tube 200L Alu
233 055
Husky 716, Alu-Pump / seat AC, ball + diaphragm Buna-N, suction tube 200L Alu
233 056
Husky 716, Alu-Pump / seat AC, ball + diaphragm PTFE, suction tube 200L Alu
233 057
Husky 716, SST-Pump / seat SST, ball + diaphragm PTFE, suction tube 200L SST
238 859
Husky-Pump system with Twistork-agitator, Husky 515 Polyprolene 241-656, inlet below Husky238 860
Pump system with Twistork-agitator, Husky 515 Acetal 241-564, inlet below
289 353
Husky Finex Airspray Package, Regulator, hose, suction line, Finex Spray Gun
289 354
Husky Finex Airspray Package, Regulator, hose, suction line, Finex HVLP Gun
231 418
Husky 515 delivery and evacuation (200 L drum) with 1,8 m hose and gun
231 419
Husky 515 delivery and evacuation (200 L drum) without hose and gun
232 080
Husky 1040 SST wall mount with circulation, FRL, suction kit 200L, strainer116 cm², ⅜″
232 082
Husky 1040 SST wall mount with circulation, FRL, suction kit 200L, strainer 167 cm² ¾″
232 083
Husky 1040 SST wall mount with circulation, FRL, 1,8 m, strainer 167 cm², ¾″
232 092
Husky 1040 SST wall mount same as 232 082 but with200L lift and agitator
FRL = Filter ,Regulator, Lubricator
Manual
308 035
308 154
308 154
309 116
(325 006)
308 656
312 473
308 666
308 773
HUSKY SANITARY UNITS
Part No.
248 275
248 276
248 277
248 278
Description
1:1 Husky 3150 (SST-Santoprene Model 248 273) in 200 L, SST-RAM 234 015, follower plate
15D653 and wiper inflatable wiper 15B 097 for Ø 546 (21,5″) drum.
1:1 Husky 3150 (SST-Santoprene Model 248 274 ) in 200 L, SST-RAM 234 015, follower plate
1:1 Husky 3150 (SST-Santoprene Model 248 273) in 200 L, SST-RAM 234015, follower plate
1:1 Husky 3150 (SST-Santoprene Model 248 274) in 200 L, SST-RAM 234 015, follower plate
15D654 and wiper inflatable 15B 098 for Ø 571 (22,5″) drum.
19/02/09 11:55
5-17
Manual
309 505
309 505
309 505
309 505
Notes:
19.02.2009
5-18
TRITON 308
BSPP / NPT
(117036 seal)
Decleration
Air Inlet: ¼“
199 600
Fluid Inlet: ¾” NPT or M26x1,5 BSPP
Fluid Outlet: 3/8“ NPT or BSPP
Recommend flow rate 3,2 l/min (20cycles/160cm³)
max air consumption: 80l/min
Temperature range: 10 – 80 °C
Suction lift: 4,8m dry / 6,5m wet
Inlet fitting:
SST pump:
198 863
198 852
Outlet fitting
SST pump:
198 864
198 855
Manual: 309 303
Part No.
233 500 NPT
233 501 NPT
233 776 BSPP
(001.085 DP)
233 777 BSPP
(001.085 DP)
Description
1:1 Triton, aluminium, fluid inlet ¾″ NPT(f)
and Fluid outlet ⅜″NPT(f)
1:1 Triton, SST fluid inlet ¾″ NPT(f)
1:1 Triton, aluminium fluid inlet M26 x 1.5
and Fluid outlet G⅜″
1:1 Triton, SST, fluid inlet M26 x 1.5
and Fluid outlet G⅜″
Seat
Ball
Diaphragm
SST 1.4305
Acetal
PTFE/NBR
197 663
245 065
SST 1.4305
Acetal
PTFE/NBR
197 663
245 065
SST 1.4305
Acetal
PTFE/NBR
197 663
245 065
SST 1.4305
Acetal
PTFE/NBR
197 663
245 065
Accessories BSPP pump
BSPP 085-DP M26 x 1,5
Suction kit for model 233-776 and 233-777 (M26x1,5)
(for model 233-776 the gasket 117-291 and
nipple 76641 115002 are necessarie)
233-888
Fitting 90° M26 x 1,5 D22
(117 323 Nut / 15F150 O-ring)
M26 x 1,5
19/02/09 11:55
245-724
245-737
Suction tube/hose 30 L with 1,8 mm sieve
Suction tube/hose 200 L with 1,8 mm sieve
77848 035009
77848 035010
Suction hose 1000 mm long /D 22 SST
Suction hose 1600 mm long /D 22 SST
233-952
233-946
Strainer with Sieve 1,0 mm, ID 22mm
Strainer with Sieve 1,8 mm, ID 22mm
117-439
117-309
Sieve 1,0 mm mesh size
Sieve 1,8 mm mesh size
78808 008005
Suction tube 870 mm, SST, with foot valve
and sieve disc (see IT1. 14.25.02-E)
233-845
5 Litre hopper, connection M26 x 1,5
117 291
117-290
117-289
75188 097002
117-008
233-888
Inlet gasket, 15 x 24 x 4
Sieve inlet for 5 litre hopper
Spring for 5 litre hopper
Gasket NBR for 233-888
O-Ring Viton for
Retaining nut
5-19
TRITON 308 UNIT
Wall unit
Pail unit
Stand unit
Description
ALU pump (233500), bare
SST pump (233501), bare
SST pump, Air Pro gun (288 969)
1,4mm, hose 7,6m (233 499)
1,4mm, hose 7,6m (233 499)
1,4mm, hose 7,6m (233 499)
ALU pump, Air Pro gun (289 110)
1,0mm, hose 7,6m (233 498)
1,0mm, hose 7,6m (233 499)
1,0mm, hose 7,6m (233 498)
1,0mm, hose 7,6m (233 499)
1,0mm, hose 7,6m (233 498)
1,0mm, hose 7,6m (233 499)
1,4mm, hose 7,6m (233 498)
1,4mm, hose 7,6m (233 499)
1,4mm, hose 7,6m (233 498)
1,4mm, hose 7,6m (233 499)
1,4mm, hose 7,6m (233 498)
1,4mm, hose 7,6m (233 499)
ALU pump, hose kit (240 425),
PRO Xs2 electrostatic sprayer
233 498
233 499
240 425
245 082
245 083
245 084
245 085
245 065
245 066
delivert without suction kit
Card unit
Pail unit Stand unit Cart unit
Wall unit
233 466
233 467
233 473
233 474
233 480
233 481
233 487
233 488
---
---
289 632*
289 622*
---
---
289 633*
289 623*
---
---
289 634
289 624
289 645+
---
289 638+
289 628+
289 642*
---
289 635*
289 625*
289 646+
---
289 639+
289 629+
289 643*
---
289 636*
289 626*
289 647
---
289 640
289 630
289 644
---
289 637
299 627
233 468
233 475
233 482
233 489
233 469
233 476
233 483
233 490
233 470+
233 477+
233 484+
233 491+
233 471*
233 478*
233 485*
233 492*
234 911+
234 913+
234 915+
234 917+
234 912*
234 914*
234 916*
234 918*
233 741+
233 743+
233 746+
233 748+
233 742+
233 744+
233 747+
233 749+
289 648+
289 649+
289 641+
289 631+
Manual 309 304
* included
Regulator SST
214 895
(Manual: 307 212)
0,3 – 7 bar
+ included
Regulator acetal
241 976
(Manual:308 325)
0-2,1bar (Gauge 4 bar)
Max air consumption:
Pump: 42 l/min
Gun:
HVLP:
420 l/min
Electrostatic: 566 l/min
Conventional: 339 l/min
Hose set bundle, air hose (244 448) + fluid hose (244 447) CS-Fitting
Hose set bundle, air hose (244 448) + fluid hose (277 250) SST-Fitting
Hose set bundle, air hose (244 965) + fluid hose (215 637) MS-Fitting
Suction kit, ALU 1,2m, for 18,9 Litre pail
Suction kit, SST 1,2m, for 18,9 Litre pail
Suction kit, ALU 1,8m, for 200 Litre drum with acetal bung (188 181 screw 111 276)
Suction kit, SST 1,8m, for 200 Litre drum with acetal bung
Repair Kit fluid side Diaphragm PTFE
Repair Kit Air Valve
19.02.2009
5-20
TRITON 3D150
BSPP / NPT
(117036 seal)
Inlet fitting:
15A306
198 855
Decleration
199 601
Air Inlet: ¼“ NPT or 3/8” BSPP
Fluid Inlet: ¾” NPT or M26x1,5 BSPP
Outlet fitting:
15A290
198 852
Fluid Outlet: 3/8“ NPT or BSPP
Recommended flow rate 3 l/min (20cycles/150cm³)
Manual: 311 688
Part No.
253 704 BSPP
253 705 NPT
Description
3:1 Triton, SST, fluid inlet M26x1,5 BSPP(f)
and Fluid outlet ⅜″ BSPP(f)
3:1 Triton, SST fluid inlet ¾″ NPT(f)
Seat
Ball
Diaphragm
SST 1.4305
Acetal
PTFE/NBR
197 663
246 011
SST 1.4305
Acetal
PTFE/NBR
197 663
246 011
Accessories:
246 495
Bracket, wall mount
245 067
Ball check valve repair kit
246 011
245 066
Accessories BSPP pump
3
2
Pos.:
1
2
3
4
5
6
5
1
6
BSPP Pump
4
8
7
7
8
9
9
19/02/09 11:55
5-21
Description
Nipple 8-G 3/8“
SST
Elbow 90° 3/8“
SST
Ball Nipple G3/8A
SST
Regulator
SST
Fitting GE22-ZLM-ED
SST
SST
Elbow M 26x1,5 D22
- Seal for 233 888
NBR
- o-ring for 233 888
Viton
- Union Nut for 233 888
Suction Hose/Tube:
30 Litre with sieve 1,8mm
200 Litre with sieve 1,8mm
Suction Hose:
Ø 19mm (i), L1000, D22 SST
Ø 19mm (i), L1600, D22 SST
Strainer:
(117 309) 1,8 Mesh with clamps
1,8 Mesh bare
1,0 Mesh bare
No.
76640 005001
77214 017003
77254 008003
214 895
75204 010004
233 888
75188 097002
117 008
117 439
245 724
245 737
77848 035009
77848 035010
233 946
117 309
117 439
TRITON 3D350
Max. 6 bar Air input / max.18bar fluid pressure
Air Inlet: 1/2“ NPT or BSPP
Fluid Inlet: 1” NPT or BSPP
Fluid Outlet: 1“ NPT or BSPP
Recommend flow rate 7 l/min (20cycles/350cm³)
Decleration
199 062
SST-pump contain fitting
253 707 (fitting 15A 790 BSPT)
253 708 (fitting 15A 044 NPT)
Manual: 311 689
Part No.
Description
3:1 Triton, SST, fluid inlet 1″ BSPP(f)
and Fluid outlet 1″ BSPP(f)
3:1 Triton, SST fluid inlet 1″ NPT(f)
and Fluid outlet 1″NPT(f)
253 707 BSPT
253 708 NPT
Seat
Ball
Diaphragm
SST 1.4542
Acetal
PTFE/NBR
117 004
243 152
SST 1.4542
Acetal
PTFE/NBR
117 004
243 153
Accessories:
245 875
245 874
261 695
243 154
243 152
243 153
Bracket, wall mount
Stand
Installation Tool
Ball check valve repair kit
1
Pos.
Description
1
Fitting
- Gasket for 15B 285
- O-Ring for 15B 285
Elbow G1 D28
Suction Hose
- 1600mm DN25 2x D28
Suction hose / Tube:
30L with sieve 1,8 mesh
200L
Strainer with clamps
only Strainer 1,8 mesh
2
3
3
4
1
4
2
3
Stand
245 874
19.02.2009
Installation tool
261 695
5-22
Part No.
15B 285
75188 097003
74186 033020
77741 131003
77848 035004
15B 282
15B 283
77647 020005
117 309
Code Key Pumps „Husky“ pump
D
Model
1
2
3
4
5
6
7
8
205 (¼“) BSPT+NPT
205 Remote
307 (3/8“)
515 / 716 Remote
515 / 716 Standard
716 (3/8“)
1040 (1“) Alu
1040 Alu Remote
B
C
1590 (1-1/2“) Alu
1590 Alu Remote
F 2150 (2“) Alu
G 2150 Alu Remote
K
3275 (3“)
R
S
T
U
V
1040 SST
1040 SST Remote
1590 SST
1590 SST Remote
2150 SST
X
X
Housing
1
2
3
4
5
6
Acetal NPT
Polypropylene NPT
Aluminium NPT
SST NPT
Kynar NPT
Ductyle Iron Cast NPT
A
B
C
D
E
F
Acetal BSPT
Polypropylene BSPT
Aluminium BSPT
SST BSPT
Kynar BSPT
Ductyle Iron Cast BSPT
J
K
L
M
Acetal NPT
PP-conductive NPT
SST NPT
Alu NPT
S
T
U
V
W
X
Y
Z
Z
PP NPT
Kynar NPT
Acetal BSPT
PP BSPT
Alu BSPT
SST BSPT
Kynar BSPT
PP-conductive BSPT
2150 Iron Cast
X
X
X
Seats
Balls
2
3
4
5
6
8
9
9
A
B
C
D
Actal
SST 316
SST 17-4
Hytrel
Santroprene
Buna-N
Viton
Polypropylene
Kynar
SST316 FDA
Santoprene FDA
Duckbill (515/716)
G
Geolast
Diaphragm
1
2
3
4
5
6
7
8
9
A
PTFE
Check Acetal
SST 316
SST440
Hytrel
Santroprene
Buna-N
Viton
Check Acetal
Check Kynar
1
2
PTFE
Actal
5
6
7
8
Hytrel
Santroprene
Buna-N
Viton
G
Geolast
G
Geolast
Repair Kit fluid section:
D
X
X
X
X
Seats
0 - Rep Kit
X
Balls
Diaphragm
1 – 205
3 – 307
5 – 515 / 716
7 – 1040
B – 1590
F – 2150
K – 3275
Rep Kit air valve:
238 853 – Husky 205
239 952 – Husky 307
241 657 – Husky 515/716
19/02/09 11:55
236 273 – Husky 1040Alu / 1590Alu / 2150Alu
255 061 – Husky 1040SST / 1590SST / 2150SST
238 765 – Husky 3275
5-23
TWO COMPONENT UNITS
Fixed Ratio Hydra-Cat - Variable Ratio Hydra-Cat
President
231 645
231 643
231 646
231 657
231 663
King
Bulldog
Viscount II
207 914
903 843
231 897
224 567
231 908
231 912
231 915
231 910
Extruder Module 1:1
Precision Dose
6795 524
234 922
234 923
234 924
231 668
Variable Hydra Mate
570 312
953 100
954 900
988 940 see configurator
manual 684 039
President
Stand
231 632
231 638
Isocyanat
diaphragm Pump
231 878
231 883
Variable Hydra Cat
098 229
965 119
570 135
Bulldog
Stand
231 876,
231 880,
217 337
246 041
King
Stand
King
Wall mounted
234 992
234 993
234 994
234 932
234 933
234 934
King / Premier
Frame
965 477
965 478
965 466
965 481
965 479
Isocyanat
2:1 pump
295 616
256 200
23/01/09
6-1
232 434
217 341
949 239
Pail pump
Dryer
Optimizer 2K
TWO COMPONENT UNTS
Fix Ratio Hydra-Cat
Variable Ratio Hydra-Cat
Variable Ratio Hydra-Cat
Fixed Ratio Hydra-Cat-Variable Ratio Hydra-Cat
Configurator (PDF):
309 002
309 024
684 025
Hydra-Mate
P-Dose
684 038
684 039
Part No.
Description
Manual
965 119
570 135
226 931
098 229
207 914
903 843
231 645
231 643
231 646
231 657
231 663
231 910
231 908
231 912
231 915
231 897
224 567
234 921
234 922
234 923
234 924
231 668
246 611
6795 524
217 337
246 041
231 632
231 638
231 876
231 878
231 880
231 883
234 931
234 932
234 933
234 934
231 291
965 481
965 479
965 477
965 478
965 466
570 312
953 100
954 900
Extrusion unit 1:1 President CS
Extrusion unit 1:1 President SST
Monark VRHC, Ratio 2,9:1 to 10:1
Pump-Code B2-5
Bulldog VRHC, Ratio 1:0 to 4,5:1, 120-210 bar Pump-Code 2-2
President, pressure ratio 5:1, Ratio 1:1, 2 x No. 11, inlet ¾″(F) or ¾″NPT(M)
President, pressure ratio 5:1, Ratio 1:1, 2 x No. 11, inlet 1-½″ NPT(M)
President, pressure ratio 19:1, Ratio 1:1, 2 x No. 7
President, pressure ratio 10:1, Ratio 4:1, 2 x No. 2 and 1 x No. 9
Bulldog, pressure ratio 35:1, Ratio 2:1, 3 x No. 7
Bulldog, pressure ratio 26:1, Ratio 3:1, 2 x No. 2 and 1 x No.7
Bulldog, pressure ratio 28:1, Ratio 4:1, 2 x No. 2 and 1 x No.9
Bulldog, Mix 1:1, Pressure ratio 15:1, SST, polyethylene-packing (Foam Cat)
King, pressure ratio 68:1, Ratio 1:1, 2 x No. 2
King, pressure ratio 46:1, Ratio 2:1, 3 x No. 2
King, pressure ratio 50:1, Ratio 3:1, 2 x No. 2, + 1 x No.7
King, pressure ratio 54:1, Ratio 4:1, 2 x No. 2, + 1 x No.9 ca 212 cc
King, pressure ratio 35:1, Ratio 4:1, 2 x No. 0, + 1 x No.5 ca 344 cc (210 b.)
King, pressure ratio 26:1, Ratio 1:1, 2 x lower 217 339
King, pressure ratio 24:1, Ratio 1:1, 2 x No. 1 (from single parts) wide construction
Viscount II pump, pressure ratio 1.7:1, Ratio 1:1, max. fluid pressure 138 bar
Viscount II pump, pressure ratio 2.76:1, Ratio 1:1, max. fluid pressure 210 bar
President stand module, Ratio 13:1lower 231 657
(Wall mounted 231 607)
President stand module, Ratio10:1 lower 231 663
(Wall mounted 231 613)
Bulldog stand module, Ratio 23:1pump 231 908
(Wall mounted 231 847), max 210 bar
Bulldog stand module, Ratio 35:1 pump 231 910
Bulldog stand module, Ratio 26:1, pump 231 912
Bulldog stand module, Ratio 28:1, pump 231 912
King, stand module, Ratio 68:1, pump 234 921
Premier Frame III, Ratio 1,5:1 to 4,5:1, 368-502 bar
(max 345 bar) without mixer
Premier Frame III, Ratio 2:1 to 6:1,
307-394 bar
(max 345 bar) without mixing valve
King Frame III, Ratio 1:1 to 3:1,
262 - 393 bar
(max 345 bar) without mixing valve
King Frame III, Ratio 1,5:1 to 4,5:1, 210 - 286 bar
King Frame III, Ratio 3:1 to 9:1,
131 - 157 bar
25:1 Bulldog, var. Hydra-Mate, Ratio 3,7 - 8:1, main lower 222 639 slave 948 641
25:1 Bulldog, var. Hydra-Mate, Ratio 7,5 - 16:1, main lower 222 639 slave 222 017
50:1 King, var. Hydra-Mate, pressure ratio 50:1, Ratio 7,5 - 16,5:1
main lower 222 639, slave 222 017 (standard air motor)
310 726
310 726
307 399
6000 205
307 001
307 001
308 224
308 224
305 597
308 225
305 597
308 145
310 796
308 226
307 547
6000 083
307 547
308 224
308 225
310 796
308 226
684 025
6000 206
684 025
305 745
308 930
308 930
Accessories:
232 434
217 341
949 239
256 200
295 616
xxx xxx
23:1 Monark, scavenging pump pail unit
Air drier (desiccant 106 498) 1x included in 217 341
Optimizer 2K HVLP two-component glue spray gun
Transfer pump 2:1, for polyurethane, polyurea or similar not flammable material, 95cm³ /cycle
Same like 256 200 but 239cm³ / cycle
Isocyanat-diaphragm supply kit , Husky, 716, 1040, Triton 308
222 012
239 388
222 015
222 017
222 019
948 640
904 287
Lower No.2 CS / PTFE-UHMWPE Packing
Lower No.5 CS / PTFE-UHMWPE Packing (948 195)
Lower No.7 CS / PTFE-UHMWPE Packing (948 197)
Lower No.11 SST / PTFE Packing
SST= Stainless Steel
23/01/09
6-2
Effective area in mm²
357.44
357.44
285.81
238.17
178.72
570.00
953.60
308 765
307 548
308 341
312 766
311 882
309 815
307 944
307 944
307 944
307 944
307 944
307 944
307 430
TWO COMPONENT UNITS - QUICK SET
Xtreme Mix 360
Order
heater
separately
accessories:
lift, agitator, drum cover
248 841
15F028
230V
1000W
without plug and cable
Part No.
248 835
248 836
248 841
Description
King stand unit, Ratio 2:1, pressure ratio 46:1, max 317 bar,
included:
Stand-module 234 932 with pump 234 922, supply pump, scavenging pump, agitator,
Air hose kit, heated hose kit 15 m, heater control-Box, material – sensor, mix valve kit,
Static-Mixer, 1,8 m ¼“ whipped hose and airless gun
King stand unit, Ratio 3:1, pressure ratio 50:1, max 345 bar, included:
Stand-module 234 933 with pump 234 923, supply pump, scavenging pump, agitator, Air
hose kit, heated hose kit 15 m, heater control-Box, material – sensor, mix valve kit,
Static-Mixer, 1,8 m ¼“ whipped hose and airless gun
Manual
310 794
Xtreme Mix unit, Ratio 1:1 - 10:1, pressure ratio 68:1, max 345 bar, included:
310 794
310 794
Xtreme Mix 360 248 842, supply pump, scavenging pump, agitator, Air hose kit, heated
hose kit 15 m, heater control-Box, material – sensor, mix valve kit, Static-Mixer,
1,8 m ¼“ whipped hose and airless gun with XHD531 tip
Viscosity 200-20.000cps
Max.40 cycle/min (lower 180ccm)
Manuals:
Hydra Cat
Feed and solvent flush kits
Viscount heater
Heater installation kit
Heated hose control
Heated hose
Agitator kit
Mix Manifold kit
Air supply kit
23/01/09
Xtreme Mix360
310 795
310 836
309 524
310 677
310 798
309 572
310 863
310 797
309 827
68:1 (248 842 bare)
Lower L180 C4 / Air Motor King 245 111
max. : 40 cycle/min
Ratio tolerance range: up to + / - 1%
Ratio: 0,1 − 10 :1 (0,1 increments)
Viscosity (without heater): 200 − 20000 mPas (centipoises)
Flow rate: min: 0.95 lpm / max: 11,4 lpm
Max. air pressure: 310 – 500 bar
Air consumption max. 3,9m³/min
Sound pressure: 98 dBA
6-3
TWO COMPONENT UNITS - XTREME MIX 185
Xtreme Mix 185
Ratio tolerance range up to +/- 1%
Manual:
Ratio: 0,1 − 10:1 (0,1 increments)
Pump
310 662
Viscosity (without heater): 50 − 20000 cP Dispense Valve 310 655
Flow rate: min:0.02 lpm / max: 3,8 lpm
Mix Manifold
310 654
Max. air pressure: 324 bar
Hydra Mix:
310 672
Ultra Mix:
310 671
Pump size: Hydra Mix 92cm³ / cycle - Ultra Mix 54cm³ / cycle
Sound pressure: 98 dBA
Splitter
Remote Mix manifold
TLS Pump
Kit Hydra Mix
Mix manifold
234 026
234 450
248 397
Part No.
248 427
Description
Manual
Xtreme Mix 185, Cart mount, approved for hazardous location
Ratio 47:1, lower 248 542 Hydra Mix CS,
complete unit*
complete unit*
Such as 234 616 but with heater (230V 245863)
complete unit*
Xtreme Mix 185, approved for non hazardous location
complete unit*
Ratio 47:1, lower 248 542 Hydra Mix CS,
complete unit*
complete unit*
234 616
234 838
234 840
234 617
234 839
234 841
* complete unit included:
234 615
¤248 652
234 450
248 397
248 428
248 427
245 706
¤223 688
¤511 352
¤ 248 349
¤248 403
¤248 404
¤234 026
¤XTR5 504
¤XTR5 502
310 665
310 666 T
XTR-Gun XTR504, 15 m material hose H53850, 1,8m whipped H72506,
Static mixer and material container (23 Litre)
Xtreme Mix 185, Wall mount, bare unit
Ratio 47:1, lower 249 314 Hydra Mix 185 CS, for hazardous location,
with Filter 238782 in SST, 30Mesh 3/8”,
Such as 234 614 but for non hazardous location
234 614
310 665
310 666 T
Accessories
Circulations kit SST, only circulation
Mix manifold
Remote manifold kit SST
Circulation - heater - montage kit (only for cart mount unit`s)
TSL - Pump Kit for Hydra Mix
Display board
Bearing rep. Kit, for turbine power supply
Static Mixer 3/8”, 12 elements, 500 bar
Main- board for Xtreme Mix 185
† = needed by change the board
Reporting kit(†) incl. CD (15E074) & RS-232 (cable barrier 15B816) for hazardous location
Such as 248 403 but for non hazardous location (cable 15A926)
Splitter for two guns
XTR 5 gun, 4-fingers with XHD - RAC and 519 tip
XTR 5 gun, 2-fingers with XHD - RAC and 519 tip
B-components supply see manual
310 665
310 666T
310 673
310 654
310 676
310 677
310 678
310 666
308 034
309 623
309 964
309 192
¤not shown
248 570
248 572
248 574
248 576
248 441
248 437
Ultra Mix CS pump Kit with sensor
Hydra Mix 500 CS pump Kit with sensor
Tuff Stack packing all Hydra Mix
Packing kit Ultra Mix
23/01/09
Manual: 310 662 / 310 672
Ultra Mix SST Pump Kit with sensor
248 571
Hydra Mix 500 pump SST Kit with sensor
248 573
248 575
248 577
Tuff Stack repair kit all Hydra Mix
248 442
Packing kit Hydra Mix
248 438
6-4
TWO COMPONENT UNITS - XTREME MIX 290-500
Housing manifold
non mix
Splitter
15E 725
234 026
Heated Hose Kit
Manual 309 525
OEM´s
Bare Unit
248 842
Cart Unit
OEM = Original Equipment Manufacturer
without cart or material container
Unit, approved for hazardous location Class 1, Div1, Group D
Xtreme Mix
Cart
Xtreme Mix
OEM’s
Lower
(Tuff-Stack)
233 855
233 871
L250 C4
233 872
L220 C4
233 857
233 873
L180 C4
233 858
233 874
L145 C4
233 859
233 875
L250 C4
233 860
233 876
L220 C4
233 861
233 877
L180 C4
233 862
233 878
L145 C4
L145 C3
248 831‡
L180 C3
248 832‡
L220 C3
248 833‡
L250 C3
248 834‡
234 024
ohne Pumpen
‡ = Pumpen ohne integriertem Materialfilter
Ratio
Air-Motor
Max Pressure
45:1 King
56:1 King
68:1 King
80:1 King
45:1 Quiet King
56:1 Quiet King
68:1 Quiet King
80:1 Quiet King
80:1 King
68:1 King
56:1 King
45:1 King
4500PSI, (310 bar)
5600 PSI, (386 bar)
6800 PSI, (469 bar)
7250 PSI, (500 bar)
4500 PSI, (310 bar)
5600 PSI, (386 bar)
6800 PSI, (469 bar)
7250 PSI, (500 bar)
7250 PSI, (500 bar)
6800 PSI, (469 bar)
5600 PSI, (386 bar)
4500 PSI, (310 bar)
45:1 King
56:1 King
68:1 King
80:1 King
45:1 Quiet King
56:1 Quiet King
68:1 Quiet King
80:1 Quiet King
68:1 King
4500PSI, (310 bar)
5600 PSI, (386 bar)
6800 PSI, (469 bar)
7250 PSI, (500 bar)
4500 PSI, (310 bar)
5600 PSI, (386 bar)
6800 PSI, (469 bar)
7250 PSI, (500 bar)
Unit, approved for non hazardous location
233 863
233 864
233 865
233 866
233 867
233 868
233 869
233 870
248 842*
233 879
233 880
233 881
233 882
233 883
233 884
233 885
233 886
234 025
L250 C4
L220 C4
L180 C4
L145 C4
L250 C4
L220 C4
L180 C4
L145 C4
L180 C4
without Pumpe
Manual
Operation
Software kit
Parts–Rep OEM
Parts Rep card
XTR-7 Gun
Heater
Circulation kitHeated hose
Access. Kit, heater
Manifold
Xtreme lower
Xtreme operation
Air motor King
Air motor quiet King
309 535
309 623
309 521
309 518
310 743
309 524
309 525
309 615
309 568
309 340
309 329
309 347
309 348
XTR-Gun
Quickset
309 523
310 794
Xtreme Mix290-500
max. 40 cycle/min
Ratio tolerance range up to +/- 1%
Ratio: 0,1 − 10:1 (0,1 increments)
Viscosity (without heater):
200 − 20000 cP
Flow rate:
min:0.95 lpm / max: 11,4 lpm
* = Bare unit 248 842 see Manual “Quick-set“ 310 794
Accessories:
234 026 Splitter, two gun
511 352 Static misxer ⅜″, 12 Elemente, 500 bar
246 397 Reporting kit (†) incl. CD (15E732) & RS-232 (cable barrier 15A816) for hazardous location
246 322 Such as 246 322 but for non hazardous location (cable 15A926)
245 705 Main- board for Xtreme Mix 290-360-440-500 † = needed by change the board
15E 725 Housing manifold non mix,
23/01/09
6-5
309 964
309 623
309 623
Flow – Meter overview
Part No.
Description
239 716
244 292
249 426
249 427
195 568
116 161
246 190
246 652
246 340
116 158
15D 135
G3000
G3000 HR
G250
G250 HR
Kracht
Piston
HG 6000
HG 6000 HR
HG 6000 HT
Coriolis
Coriolis
Flow rate (cm³/min)
min:
max:
75
3800
38
1900
75
3800
38
1900
50
2000
40
10000
50
22712
25
7571
50
22712
40
2000
40
2000
Viscosity
min:
max:
20
3000
20
3000
20
3000
20
3000
20
1000
0,3
20
30
1mill.
30
1mill.
30
1mill.
1
2000
1
2000
for more information see page 7-7 (Informer)
Notes:
23/01/09
6-6
Max
pressure
276bar
276bar
17bar
17bar
80bar
210bar
410bar
410bar
410bar
345bar
160bar
K-factor
Manual
0,119
0,061
0,119
0,061
0,1
0,105
0,286
0,143
0,286
0,061
0,061
308 778
308 778
308 778
308 778
none
309 148
309 834
309 834
309 834
309 234
309 234
TWO COMPONENT UNITS - PROMIX EASY
Cart
mounted
Wall
mounted
Hybrite-Unit
Flow Meter Unit
Flow Meter A + Flow Meter B
Lower A + fluid meter B
Ratio - 0,1 – 30 : 1
Tolerance: +/- 1 %
Viscosity 20 – 3000 cP
Ratio – 0.1 – 10:1
Tolerance +/- 5%
A- Viscosity 50 - 20 000 cP
B-Viscosity 20 - 3000 cP
Lower A + lower B
Ratio - 0,1 – 10 : 1
Tolerance: +/- 5 %
Viskositätsbereich 50 – 20.000 cP
Flow rate: 0,02-2,8 l/min
Splitter two guns
Mix Manifold
Auto flush kit
TSL Pump Kit
Hydra Mix
Ultra Mix
248 583
248 427
234 593
234 451
249 076
248 397
Stand kit/ Caster kit
234 026
Gun
Air regulator kit
Pressure pot
248 224
248 225
248 587
248 588
23/01/09
Fluid filter
Power
supply
248 851
248 398
6-7
248 400
248 401
TWO COMPONENT UNITS - PRO MIX EASY
Part No.
Descripton
Manual
309 908 B
309 909 T
ISSeP 04 Atex020X
EEx ia p IIA T3
Cart mounted
with Ultra Mix- CS-lower, 7,5 m hose set, material regulator,
Delta HVLP air gun 239561,
Wall mount, 2 p. flow meter G3000, proportional mixer CS
Wall mount, 2 p. flow meter G3000, proportional mixer SST
Wall mount, 2 p. 2,5:1 Ultra Mix CS-lower incl. sensor, proportional mixer,
Wall mount, 2 p. 2,5:1 Ultra Mix SST-lower incl. sensor, proportional mixer,
Wall mount, 2 p. Hydra Mix 500 (248 572) CS-lower incl. sensor, proportional mixer
Wall mount, 2 p. Hydra Mix 500 (248 573) SST-lower incl. sensor, proportional mixer
Wall mount, 2 p. Hydra Mix 600 (248 574) CS-lower incl. sensor, proportional mixer
Wall mount, 2 p. Hydra Mix 600 (248 575) SST-lower incl. sensor, proportional mixer
Wall mount, 2 p. Hydra Mix 700 CS-lower (248 576) incl. sensor, proportional mixer
Wall mount, 2 p. Hydra Mix 700 SST-lower (248 577) incl. sensor, proportional mixer
Wall mount,
1p. 2,5:1 Ultra Mix CS-lower with sensor,
1p. G3000 flow meter, proportional mixer
Wall mount,
1p. 2,5:1 Ultra Mix SST-lower with sensor,
Wall mount,
1p. Hydra Mix 500 (248 573) SST-lower incl. sensor,
Wall mount,
1p. Hydra Mix 500 (248 572) lower incl. sensor,
Wall mount,
1p. Hydra Mix 600 CS-lower (248 574) incl. sensor,
Wall mount,
1p. Hydra Mix 600 SST-lower (248 575) incl. sensor,
Max
Pressure
Unite, approved for hazardous location
234 596
234 618*
234 619*
234 599*
234 601*
234 606*
234 608*
234 609*
234 611*
234 612*
234 613*
234 597*
234 598*
234 603*
234 602*
234 604*
234 605*
Unit, approved for non hazardous location
234 600*
Wall mount with two Ultra Mix lower (248 570) incl. sensor,
234 825*
Wall mount with two Ultra Mix lower SST (248 571) incl. sensor,
234 607*
Wall mount with two Hydra Mix 500 lower (248 572) incl. sensor,
234 826*
Wall mount with two Hydra Mix 500 lower SST (248 573) incl. sensor,
234 610*
Wall mount with two Hydra Mix 600 lower (248 574) incl. sensor,
234 827*
Wall mount with two Hydra Mix 600 lower SST (248 575) incl. sensor,
*Wall mount withour asseccories
Part No.
248 403
248 404
248 349
234 593
234 451
248 397
248 652
248 583
248 427
248 398
248 587
248 588
249 076
248 851
234 026
248 224
248 225
248 399
248 400
248 401
Accessories
Reporting kit(†) incl. CD (15E074) a. RS-232 (cable barrier 15B816) for hazardous location
Such as 248 403 but for non hazardous location (cable 15A926)
† = needed by change the board
Main- board for Xtreme Mix 185
proportional mixer,
(dose valve 287 222 see 310 655)
proportional mixer, SST (dose valve 287 222 see 310 655
Remote mix manifold
Circulation kit
TSL-pump kit, for Ultra Mix lower
TSL-pump kit, for Hydra Mix lower
Power supply kit, for non hazardous location
Gun air regulator kit for flow meter unit’s,
Gun air regulator kit for flow meter unit’s,
Auto flush kit for Pro-Mix Easy
HD-fluid filter, SST, 30 Mesh, ⅜″NPT(A) inlet, ⅜″ and ¼″NPT(I) outlet, 90° swivel,
Splitter for two gun
Pressure pot 9,5 L, alum. with air drier, without regulator
Pressure pot 19,0 L, alum. with air drier, without regulator
2-wheel−cart incl. backside cover plate
Stand incl. backside cover plate
4 wheel (without stand)
Ultra Mix pump, fluid inlet ¾″NPT(m) outlet ¼″NPT(f)
Hydra Mix pump, fluid inlet 1″NPS(m), outlet ⅜″NPT(f)
Lower
23/01/09
6-8
17 bar
17-275 bar
17-275 bar
17 bar
17 bar
165 bar
165 bar
234 bar
234 bar
324 bar
324 bar
17 bar
17 bar
165 bar
165 bar
234 bar
234 bar
17 bar
17 bar
165 bar
165 bar
234 bar
234 bar
manual
309 623
309 909
310 654
310 676
310 673
310 678
310 675
310 700
310 800
307 273
309 964
309 192
310 674
310 671
310 672
310 662
TWO COMPONENT UNITS - PRO-MIX II
234 441
248 252
234 443
570 132
234 588
Manual
ProMix II model see configuration in manual
310 653T
310 633 B
234 441
248 252
234 443
248 251
287 222
234 564
234 566
15D 135
15D 599
234 563
116 158
244 039
Box Booth control, Display
Control box, material, smart fluid panel
Housing Easy Key Display
Proportional – Mix Manifold Promix 2
Fluid valve, 287 787 with ¼“NPT(I) fluid circulation connect
Flow meter – 75 to 3800 cc/min (G3000
239 716 bare, 308 778)
Flow meter – 38 to 1900 cc/min (G3000HR 244 292 bare , 308 778)
Coriolis – Flow meter bare, max pressure 160 bar, 40 – 2000 cc/min, 1 – 2000 mPas
Coriolis – Flow meter 15D 135 with mounting plate and fittings
Coriolis – Flow meter 15D 135 with power supply
Coriolis – Flow meter bare, max 345 bar, 40 – 2000 cc/min, 1 – 2000 mPas
Coriolis – Flow Meter 116 158 with mounting plate and fittings
Colour change kit, low - and high pressure see manual
Colour change valve assembly, max 21 bar
Colour change valve, max 21 bar
Colour change Valve assembly, max 207 bar
Colour change valve, max 207 bar
234 588
Gun flush box kit (bare box 244105)
Gun Holder
198 405
Pro XS3-XS4
196 787
Pro XS2
196 768
196 769
DeltaSpray
196 770
Alpha
196 771
15G 093 G15
15G 346
G40
15T 646
Data Download Kit (†) incl. CD 234 669 and RS-232 cable 118 342
234 668
248 163
Main board
(†) = needed by change the board
234 670
Printer kit: electro cable, choose power supply
113 774
Printer (without electro cable)
114 443
Power supply for printer
119 340
Electro cable ProMix II– printer 3 m
514 037
Printer paper
240 652
Printer barrier-kit
570 132
Shut off valve
310 653
310 654
310 655
310 653
309 234
309 234
310 696
309 234
309 234
310 656
307 731
307 941
308 977
308 291
310 695
Pro 3500 (hc)-4500
Alpha Plus
Air Pro
310 669
310 653
308 818
308 818
308 851
240 652
Printer - Barrier
287 222
287 787
248 251
Manifold
23/01/09
Dispense Valve
15D 599
234 563
244 039
234 564
234 566
Coriolis Flow meter
113 774
Printer
Fluid Meter
6-9
Notes:
23/01/09
6-10
TWO COMPONENT UNITS - REACTOR
Reactor E-10
Reactor A-20
Reactor E-20/E-30
Reactor E-XP1/E-XP2
249 802
249 804
249 572
249 571
253 831
253 834
259 032, 259 031
259 722, 259 710
Reactor H-25
Reactor H-XP2
253 402, 255 002
253 408, 255 008
253 405, 255 005
255 402
255 012
255 405
255 015
Data Report Kit
Reactor IPH -25
Reactor IPH-40
Reactor H-40
Reactor H-XP3
Drain Valve
255 824, 255 821
255 814, 255 811
255 825, 255 822
255 815, 255 812
255 826, 255 823
255 816, 255 813
FTS Sensor
Splice Kit
6AWG
261 669
261 670
255 148
255 149
255 150
246 085
246 086
Air drier
T1-T2
pump
replacement
(15C381)
232 434
23/01/09
15M 312 (20St.)
255 039 (4St.)
261 821 (2St.)
246 477
6-11
295 616
256 200
TWO COMPONENT UNITS - REACTOR
Part No.
Description
Manual
Reactor with shot controller
¥ with Gun ARC 255828, heated hose 246 049, whip hose 246050
Reactor IPH-25 (255 814) 230V 1-phasic, 69A, 8KW, 10 kg/min,138 bar
255 824¥
255 825¥
255 826¥
255 821¥
255 822¥
255 823¥
249 571
249 802*
249 572
249 804*
259 029
259 707*
259 030
259 719*
259 032
259 710*
259 031
259 722*
253 831
253 834*
†255 402
255 012*
‡253 402
255 002*
‡253 408
255 008*
255 405
255 015*
253 405
255 005*
Reactor, E-10, 230V, 2 x 2-phasic, 3800 W (10A Motor/10A heater) 5,4 kg/min,
Reactor 249 571 + 249 499 + 249 810
Reactor, E-10, 230V, 2-phasic, 3800 W 16 A , 5,4 kg/min, 138bar
Reactor 249 572 + 249 499 + 249 810
Reactor, E-XP1, 400V 3-phasic, 15,8KW, heater 2 x 5,1KW, 3,8 l/min, 172 bar
Reactor 259 029 + 246 679 + 246 055 + AP Fusion 246 100 AR2929 +1x AR2020
Reactor, E-20, 400V, 3-phasic, Heater 6KW, 9 kg/min, 138 bar
Reactor 259 030 + 246 678 + 246 050 + AP Fusion 246 101 AR4242 + 1x AR5252
Reactor, E-XP2, 400V 3-phasic 23KW, heater 2x 7,7KW, 7,6 l/min, 241 bar
Reactor 259 032 + 246 679 + 246 055 + AP Fusion 246 100 AR2929 +1x AR2020
Reactor, E-30, 400V, 3-phasic, heater 2x5,1KW, 13,5 l/min, 140 bar
Reactor 259 031 + 246 678 + 246 050 + AP Fusion 246 101 AR4242 + 1x AR5252
Reactor, A-20, 400V, 3-phasic, 9000 Watt, 9 kg/min, 140 bar
Reactor 253 831 + 246 678 + 246 050 + AP Fusion 246 101
Reactor, H-25, 400V 3-phasic 16KW, heater 2x4KW, 10 kg/min, 138 bar
Reactor 255 402 + 246 678 + 246 050 + AP Fusion 246 101 AR4242 + 1x. AR5252
Reactor, H-40, 400V 3-phasic 26,6KW, heater 2x6KW, 20 kg/min, 138 bar
Reactor 253 402 + 246 678 + 246 050 + AP Fusion 246101 AR4242 +1x AR5252
Reactor, H-40, 400V 3-phasic 31,7KW, heater 10,2KW, 20 kg/min, 138 bar
Reactor, H-XP2, 400V 3-phasic 23,3KW, heater 2x7,7KW, 20 kg/min, 138 bar
Reactor, H-XP3 400V 3-phasig, 31,7KW, heater 2x10,2KW, 10,6 kg/min, 241 bar
† max. 94,6m 125m hose length
312 064
312 062T
312 063R
311 075
312066R
312065T
312066R
312065T
311 512R
311 511T
312 064
312 062T
312 063R
‡ max. 125m hose length
Bare & compete units
*complete unit`s with heated hose 15m, whipped 3m, Fusion gun
power hose =1000W/15 m (two hoses) or 33,3W/m hose, whipped =200W
Accessories
24A 024
247 606
255 148
255 149
15M 312
261 669
261 670
246 477
288 359
246 085
246 086
Proportioning Pumps Reactor
Seal Kit Piston & Cylinder
Feed Pump Kits
Air supply kits
Power lock heated hose
312 068
312 071
309 815
309 827
309 572
Conversion kit “shot controller” for H25 and H40 hydr. Reactor
Pump line Retrofit Kit (only hydr. part) for Gusmer H20/35-GE
Drain valve conversion kit for component A + B (lever red and blue)
312 070
Drain valve B (lever red)
255 150
Drain valve A (lever blue)
Splice kit 6AWG (20 pieces),
255 039 ( 4 pieces),
261 821 (2 pieces),
FTS Sensor JIC to FIC fittings
309 572
FTS Sensor JIC to NPT fittings
309 572
Circulation kit for Reactor drum , return tube with Air drier (Desiccant replacement 15C381) 309 852
Retrofit kit inrush limiter (hose heater)
Kit, Production- Data Report for electric unit
309 867
Kit, Production- Data Report for hydraulic and Air unit
309 814
Data Report
309 854/5 &
309 726/731
Transfer / supply
T1 Pump, Transfer pump 2:1, for polyurethane, polyurea or similar not flammable material,
256 200
311 882
95cm³ /cycle
T2 Pump, Same like 256 200 but 239cm³ / cycle
295 616
246 898
Supply Kit,
incl. 2x pump 295 616 + 2 hose 217 382 + 2x adapter 157785
246 081
Complete supply kit, same like 246 898+ adapter 113344+ drier246 640+ Air Kit 246 483
247956
same like 246 898 but with pump 256 200
247955
same like 246 081 but with pump 256 200
xxx xxx
Isocyanat - Diaphragm supply kit´s, Husky, 716, 1040, Triton 308
309 815
232 434
23:1 Monark scavenging pump pail unit
308 765
248 139
0,95 Liter solvent flush kit,
309 963
248 229
19,0 Litre solvent flush kit, Husky 307 pump
23/01/09
6-12
TWO COMPONENT UNITS - GUNS
Fusion Gun Selection Guide
Round: Stay longer clean (Foam)
AP 0 easy to clean
Harder to overlap
Flat: Smoother surface with Polyureas
Finer particle break up
Better overlapping with even film
Best for build up Polyureas
Air Purge “Round”:
Air Purge “Flat” :
Gun simplicity, longest spray gun before pattern lost
Gun simplicity with “non foam”, smoother finish, thin film build, pattern size choice with tip
Mech. Purge Round:
Mech. Purge Flat:
Better mixing performance vs AP (Polyureas), no need of large compressor,
Best mixing performance (Polyureas), smoothest finish, Patter size choice, no need of
large compressor
Foam (138 bar):
Polyurea ( 207 bar):
Round air purge – Stays longer clean, simplicity, keeps longer a good spray patter,
Flat mech. purge – Best mixing, best particles break up, low air consumption ,
choice of spray pattern
Mechanical Purge Spray Gun
Gun No.
Mix Module
247 211
247 212
247 213
247 218
247 219
247 225
247 226
247 231
247 232
247 233
247 239
247 240
247 245
247 246
MR3535
MR3535
MR3535
MR4747
MR4747
MR5757
MR5757
MR6666
MR6666
MR6666
MR8282
MR8282
MR9494
MR9494
248 603
Round
Tip
RTM030
RTM040
RTM055
RTM040
RTM055
RTM055
RTM070
RTM070
RTM080
RTM090
RTM090
RTM100
RTM100
RTM110
Mix Module
XR2323
XR2929
XR2929
XR3535
XR3535
XR3535
XR4747
XR4747
XR5757
XR5757
Round Tip
RTM040
RTM030
RTM040
RTM030
RTM040
RTM055
RTM040
RTM055
RTM055
RTM070
Gun No.
249 815
Manual 309 856
Gun No.
Mix Module
247 257
247 258
247 265
247 266
247 267
247 273
247 274
247 275
247 281
247 282
247 283
247 289
247 290
247 291
MF1818
MF1818
MF2929
MF2929
MF2929
MF3535
MF3535
MF3535
MF4747
MF4747
MF4747
MF5757
MF5757
MF5757
Conversion Kit Standard Mech. Purge Gun
converted into a solvent Purge Gun
Gun No.
247 003
247 006
247 007
247 011
247 012
247 013
247 018
247 019
247 025
247 026
“STANDARD”
Mix Module
XF2323
23/01/09
Flat
Tip
FTM317
FTM424
FTM424
FTM438
FTM624
FTM438
FTM624
FTM638
FTM624
FTM638
FTM838
FTM638
FTM838
FTM848
310 648
“IMPINGEMENT”
Gun No.
247 050
247 051
247 057
247 058
247 061
247 062
247 063
247 065
247 066
247 067
247 073
242 074
247 075
247 081
247 082
247 083
247 089
247 090
247 091
247 163
Mix Module
XF1313
XF1313
XF1818
XF1818
XF2323
XF2323
XF2323
XF2929
XF2929
XF2929
XF3535
XF3535
XF3535
XF4747
XF4747
XF4747
XF5757
XF5757
XF5757
XF2332
Flat Tip
FTM317
FTM424
FTM317
FTM424
FTM424
FTM438
FTM624
FTM424
FTM438
FTM624
FTM438
FTM624
FTM638
FTM624
FTM638
FTM838
FTM638
FTM838
FTM848
FTM438
“four – hose recirculating gun manifold”
Flat Tip
FTM438
6-13
Air Purge Spray Gun
Gun No.
246 099
246 100
248 617
246 101
246 102
246 103
246 104
246 105
255 201
255 202
Part No.
249 525
249 526
253 888
248 408
249 529
249 530
249 810
249 421
Mix Module
Round
AR2020
AR2929
AR3737
AR4242
AR5252
AR6060
AR7070
AR8686
AR4242
AR5252
Manual 309 550
Gun No.
Mix Module
247 101
247 102
247 103
247 104
247 107
247 108
247 111
247 112
247 113
247 114
247 117
247 118
247 121
247 122
247 123
247 124
247 127
247 128
247 131
247 132
247 133
247 134
247 137
247 138
AF2020
AF2020
AF2020
AF2020
AF2020
AF2020
AF2929
AF2929
AF2929
AF2929
AF2929
AF2929
AF4242
AF4242
AF4242
AF4242
AF4242
AF4242
AF5252
AF5252
AF5252
AF5252
AF5252
AF5252
Flat
Tip
FT0424
FT0438
FT0624
FT0638
FT0838
FT0848
FT0424
FT0428
FT0624
FT0638
FT0838
FT0848
FT0424
FT0438
FT0624
FT0638
FT0838
FT0848
FT0424
FT0438
FT0624
FT0638
FT0838
FT0848
Description
Flat Pattern Stud Wall Gun, AF4242 / FTM979
Flat Pattern Stud Wall Gun, AF5252 / FTM979
Non 1:1 Ratio Gun,
AR 2223
Spatter Pattern Gun,
AR 7070
Wide round pattern Gun,
AW 3939
Wide round pattern Gun,
AW 4646
Four hose Gun, AW2222
Stud Wall Foam Kit
Manual
309 550
311 071
309 550
Solvent Purge Gun
Part No.
248 597
248 647
248 603
Description
Solvent Purge Gun,
Solvent Purge Gun,
Manual
310 648
Conversion Kit Standard Mech. Purge Gun
converted into a solvent Purge Gun
Automatic Spray Gun
Part No.
248 376
248 377
248 378
248 379
248 380
248 381
248 386
248 387
248 382
248 383
248 384
248 385
Description
Air Purge Gun , round , AR 2929,
Air Purge Gun , flat , AR 2020, FT0424,
Air Purge Gun , flat , AR 2929, FT0438,
Mechanical Purge Gun, round Pattern, MR 3535, RTM040
Mechanical Purge Gun, round Pattern, MR 5757, RTM070
Direct impingement M.P. Gun, round Pattern, XR2929, RTM040
Direct impingement M.P. Gun, round Pattern, XR 3535, RTM040
Direct impingement M.P. Gun, flat Pattern, XR1313, FTM317
Direct impingement M.P. Gun, flat Pattern, XR 1818, FTM424
248 860
248 414
246 362
Threaded insert Kit
Spatter conversion Kit
Circulation Manifold Kit
23/01/09
Manual
310 649
(parts)
309 865
310 767
309 550
309 818
6-14
Pressure relive valve
2K Gun
AR poor gun
Hand
237 060
237 061
237 112
237 062
237 073
237 063
237 074
255 828
965 535
965 536
965 537
965 538
570 182
Fusion hand gun
Automatic
965 533
965 534
570 145
570 151 für P-Dose System
248 597
Mix valve
2K Monitor
System
Ratio
Monitor
241 808
215 626
241 692
Lower
240 225
207 861
241 809
Standard
cylinder
233 061
233 062
6773 174
Lower
Gauge
6773 222
098 255
6779 026
6791 551
6791 559
Standard mixer
512 012
512 013
512 014
512 016
512 071
512 287
222 012
222 015
222 017
222 019
948 640
948 641
Retaining nut
512 290
512 291
512 292
215 930
901 878
215 932
217 339
106 565
Mixer sleeve
Mixer / Standard mixer
504 068
C55 866
C26 171
6773 340
512 293
512 294
512 008
6773 342
6773 341
23/01/09
6-15
948 208
Part No.
Description
Manual
255 828
255 827
237 060
237 061
237 112
237 062
237 073
237 063
237 074
965 533
570 145
570 151
965 534
965 535
570 182
965 536
965 537
965 538
207 861
948 338
241 809
241 808
215 626
241 692
240 225
222 012
222 015
222 017
222 019
948 640
948 641
215 930
215 932
217 339
901 878
6791 551
6791 559
512 012
512 013
512 014
512 016
512 017
512 287
512 288
512 289
551 979
512 293
512 294
C55 866
512 008
512 296
512 297
512 298
6773 340
504 068
C26 171
6773 342
114 372
6773 341
948 208
511 353
511 352
512 506
512 099
6773 174
233 061
233 062
6773 222
098 255
AR-C pour gun (375) upper mount
same like 255 828 but without coupling block, tip or impinges
Pressure relief valve, opening pressure 52 bar, recommended operation range 33−40 bar
Automatic gun 2K Ultra-Lite, aluminium housing 210 bar
Automatic gun 2K Ultra-Lite, aluminium housing , bigger ratio
Automatic gun 2K Ultra-Lite for P-Dose system
Automatic gun 2K Ultra-Lite with SST housing,
Hand gun 2K Ultra-Lite with pneumatic switch, aluminium-housing
Hand gun 2K Ultra-Lite with pneumatic switch, aluminium housing, bigger ratio
Hand gun 2K Ultra-Lite with pneumatic switch, SST-housing
Hand gun 2K Ultra-Lite with electrical switch, aluminium-housing
Hand gun 2K Ultra-Lite with electrical switch, SST-housing
Static Mixer control, 210 bar, ¼″ NPT(m) fluid inlet, ½″ NPT(m) fluid outlet,
Static Mixer control, 210 bar, ½″ NPT(m) fluid inlet, ½″ NPT(m) fluid outlet,
Static Mixer control, 210 bar, ¼″ NPT(m) fluid inlet, 3/8″ NPT(m) fluid outlet, with mixer 512 506
Static Mixer control, 210 bar, ½ ″NPT(m) fluid inlet, 3/8″ NPT(m) fluid outlet, with mixer 512 506
Mixer Manifold, 210 bar, 3/8“ NPT(m) fluid inlet, ½″ NPT(m) outlet
Mixer Manifold, 210 bar, ½ ″NPT (f) fluid inlet, 3/8″ NPT(m) fluid outlet , with mixer 512 506
Mix Manifold, 345 bar, ½″ NPT(m) outlet, with ½” mixer 114 372
Standard lower No. 2,
85
cm³/ cycle
68,07 cm³/ cycle
(948 195 SST)
56,7
cm³/ cycle
(948 197 SST)
42,5
cm³/ cycle
138
cm³/ cycle 572,2 mm²,
max 210 bar
115,2 cm³/ cycle 477,4 mm²,
max 210 bar
115,89 cm³/ cycle
max 134 bar
Standard lower No. 11
193,77 cm³/ cycle, 108mm stroke, PTFE
max 103 bar
Lower
120,65 mm stroke PTFE max 103 bar
Lower (Bulldog 30:1) balance 191,5 cm³/ cycle
Dispensing cylinder No.1,
248,5 cm³/ cycle
Dispensing cylinder No.4,
134,0 cm³/ cycle
Standard mixer, plastic, ¼″ I.D. ⅜″ O.D., 140 mm, 16 elem. order separately 512 290 union nut
Standard mixer, plastic, ⅜″ I.D. ½″ O.D., 225 mm, 24 elem. order separately 512 291 union nut
Standard mixer, plastic, ⅜″ I.D. ½″ O.D., 273 mm, 30 elem. order separately 512 291 union nut
Standard mixer, plastic, ½″ I.D. ⅝″ O.D., 231 mm, 18 elem. order separately 512 292 union nut
Protective tube (Al) for mixer 512 013, order separately 512 291 union nut ⅞“ –14 UNF,
Protective tube (Al) for mixer 512 016, ½″ I.D. 229 mm long, ⅞″ – 14 UNC
Protective tube, (steel) with union nut for mixer 512 287
Standard mixer, ¼″ length 200 mm, connection thread, 11/16″ (m),
24 elements
Standard mixer, ¼″ length 203 mm, connection thread, ¼″ NPT(m), 24 elements, 10 bar
Standard mixer, ⅝″ N-jet 356 mm, connection,
⅜″ NPT(m), 12 elements, 135 bar
Mixer, length incl. connection 370 mm, connection,
⅜″ NPT(m), 30 elements, 210 bar
Standard mixer, ½″ length
241 mm, connection,
½″ NPT(m), 12 elements, 520 bar
Standard mixer,540 mm connection, ½″NPT(m) x ½“NPT(f),
30 elements, 210 bar
Mixer, ½″, nylon hose ½ NPT(m) 673 mm length,
48(acetal) elements, 241 bar
Mixer, ¼″, SST/plastic, length 218 mm, connection ¼″ NPT(m),
32 elements, 65 bar
Mixer, ⅜″, length 241 mm, connection, ⅜″ NPT(m),
Mixer, ⅜″, SST/plastic, length 333 mm connection ⅜″ NPT(m),
Mixer, ¾″, length 375 mm connection ¾″ NPT(m),
Pressure monitoring, S.B. 227 A, 50:1 Airless and S.B.227 B, 10:1, pneumatic
2K-monitor system (not flameproof measuring cell)
2K-monitor system (flameproof measuring cell)
Manometer, ¾″ (m), with damping fluid, 0-400 Bar
Seal between manometer and adapter zwischen
312 888
SST= Stainless Steel
23/01/09
6-16
308 547
309 000
305 759
306 992
306 992
306 992
306 992
307 400
307 400
308 858
307 944
307 944
307 944
307 944
307 944
307 944
307 431
307 430
307 430
901 878
6000 179
6000 178
309 000
305 573
309 000
305 573
306 961
307 399
305 573
307 399
307 399
6000 198
309 125
6779 026
Chapter 7
DISPENSING
VALVES
&
ACCESSORIES
17/02/09
7–1
®
DISPENSING VALVES & ACCESSORIES
Auto disp. valve
Meter Valve
Snuffer Gun
Metering Valve
2,75 approx.
fill level
205 435
205 612
207 440
904 227
C02026
C02078
C02078
Control Valve
Disp. Valve
Diaphragm
Metering Valve
Adjuster
Stroke
Tip, fluid
164 799
208 424
692 022
Pneu. Control Box
161 505
210 514
210 515
210 516
692 125
692 250
692 500
Dispense Valve
Compensator
212 093
918 533
918 535
243 206
243 654
243 655
243 656
243 657
243 658
918 537
Compact
Applicator
918 623
26.11.2008 10:50
2
918 625
918 539
DISPENSING VALVES & ACCESSORIES
Part No.
Description
Manual
205-435
205-612
Auto dispensing valve (tip Ø 3.18)
Dispensing valve, basic model without needle and seat (needle and seat – order separately)
Combination possibilities tip/needle
1.58 tip 164-746, needle 181-525
3.18 tip 164-747, needle 181-525
4.75 tip 164-748, needle 181-526
6.35 tip 164-749, needle 181-526
7.93 tip 164-750, needle 181-526
Dispensing valve with hard metal needle and seat, orifice 4.57 mm
Dispensing valve, ¾”, max 105 bar, outlet ø orifice 19 mm
Automatic gun, snuffer principle, 105 bar, control via 4-way air valve
Automatic dispensing valve (snuffer principle) with 7/8 -18 external fluid inlet thread, fluid outlet
⅛” NPT (I), fastening 7/16 -20 UNF.
Maximum working pressure 220 bar; 0.2 cc to 4 cc per charge output with a fluid viscosity from
3000 up to over 1 million centipoises
Same as C02-021, but fluid inlet ¼” NPT(f), outlet ⅛” NPT(f)
Same as C02-021, but fluid inlet and outlet ¼” NPT(f)
Same as C02-021, but with side container for fluids sensitive to moisture
Same as C02-021, but with double air cylinder, fluid inlet and outlet ¼” NPT(f)
Hand dispensing gun (C02-022 equipped with hand grip)
Micro-dispensing valve max. 69 bar, dispensing range 0.025 – 0.201 cc, control via 4-way air
valve, inlet ⅜″ NPT(f), outlet ¼″ NPT(f), dispense tip ø 1.6 mm, mounting fitting 2x ¼″-20
DDV membrane dispensing valve for fluids sensitive to moisture max 70 bar, control via 4-way
air valve, inlet and outlet ¼“ NPT(f). Air inlet min. 4 bar max. 8 bar outlet tip orifice 1.6 mm.
Fluid sections parts stainless steel, PTFE
Outlet tip, ⅛” NPT(m), 50.8 mm long, Ø 2.28 mm
Outlet tip, ⅛” NPT(m), 54 mm long, Ø 1.39 mm
Automatic valve, (tip seal type), outlet 2.4 mm, 68 bar
Air orifice, spring closing, ¼” fluid inlet
Automatic valve, ¼” NPT (f) inlet and outlet, 255 bar
Automatic valve, ¼” NPT (f) inlet, outlet ⅞”-14 UNF for fitting a tip reversing switch
Automatic valve, ¼” NPT (f) inlet and outlet 276 bar
Automatic valve, ¼” NPT (f) inlet and outlet snuffer principle, 276 bar
Automatic valve, ½” NPT(f) inlet and outlet, ø orifice 9.3 mm, 345 bar
Automatic valve, ¾” NPT(f) inlet, outlet ¾“ NPT(m), orifice 15.7 mm, 345 bar
Pressure compensating valve 23:1, maximum working pressure 172 bar
Pressure compensating valve 23:1, 240 Volt max. 240°C, max. working pressure 172 bar
Pressure compensating valve 51:1, maximum working pressure 241 bar
Pressure compensating valve 51:1, 240 Volt, max. 204°C, max. working pressure 241 bar
Adjust-A-Stroke, pneumatic control unit
Bulldog Adjust-A-Stroke Motor
Adjust-A-Stroke (Monark Sanitary stroke changer)
Adjust-A-Stroke (Monark stroke changer)
Adjust-A-Stroke (President stroke changer)
306-715
306-715
207-440
208-424
904-227
C02-021
C02-022
C02-025
C02-027
C02-078
C02-026
692-125
692-250
692-500
692 022
161-505
164-799
C27-148
918-623
918-625
918-533
918-535
918-537
918-539
243-655
243-656
243-654
243-657
243-658
243-206
212-093
210-302
210-516
210-514
210-515
17/02/09
7-3
306-715
306-715
307-066
306 715
310-543
310-543
310-557
310 557
310-549
310-549
310-550
310-551
309-133
(325-009)
307-270
307-050
307-205
DISPENSE NEEDLES
Stainless steel needle
with clamp connection
Part
I.D.
A.D.
No.
mm
mm
112-009
0.25
0.46
112-010
0.30
0.56
112-012
0.41
0.71
112-013
0.51
0.81
112-014
0.58
0.91
112-015
0.69
1.09
112-016
0.84
1.27
112-017
1.04
1.50
112-018
1.19
1.65
112-019
1.37
1.85
112-020
1.6
2.11
112-021
1.8
2.41
112-022
2.16
2.77
112-023
2.39
3.05
112-024
2.69
3.4
112-025
3.43
4.19
Stainless steel needle 1.4301
With chrome-plated brass connection
⅛″ NPT(m)
Part
I.D.
A.D.
Length
No.
mm
mm
mm
112-000
1.19
1.65
63.5
112-001
1.60
2.11
63.5
112-002
1.80
2.41
63.5
112-003
2.16
2.77
63.5
112-004
2.39
3.05
63.5
112-005
2.69
3.40
63.5
112-006
3.43
4.19
63.5
112-007
3.81
4.57
63.5
Length
mm
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50,8
50.8
50.8
50.8
50.8
50.8
50.8
Stainless steel needle 1.4301
With chrome-plated brass
connection ¼″ NPT(m)
Part
I.D.
A.D.
Length
No.
mm
mm
mm
690-406
1.19
1.65
63.5
690-405
1.60
2.11
63.5
690-403
2.16
2.77
63.5
690-399
3.81
4.57
63.5
109-599 Needle adapter ⅛″ NPT(m)
Brass chrome-plated
690-270 Needle adapter ¼″ NPT(m)
Brass chrome-plated
17/02/09
7–4
COLOR CHANGE UNITS
Ref No.
Description
Manual
220-xxx
218-900
218-964
692-024
907-438
Color change unit (see chart) 21 bar
Color change valve, nylon, 21 bar, orifice 6.5 mm
Color change valve, SST, 21 bar, orifice 6.5 mm
Color change valve, SST, 21 bar, 1/8” NPT(I) fluid inlet and outlet, air inlet 10-32”
Color change valve, SST, 21 bar, ¼” NPT(A) fluid discharge = 1x 218-964, 1x 188-469, 4x 112-049,
orifice 4.78 mm
HD Color change unit (see chart) 207 bar
HD Color change unit 207 bar, valve orifice ø2.16 mm
307-731
307-941
307-941
907-xxx
832-503
Housing
Part No.
Housing
stainless steel
Part No.
Number
Checks
220-019
220-020
220-021
220-022
220-023
220-024
220-025
220-026
220-027
220-028
220-029
220-030
220-031
220-032
220-033
220-034
220-035
220-036
220-037
220-038
220-039
220-040
220-041
220-042
220-043
220-044
220-045
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
220-060
220-061
220-062
220-063
220-064
220-065
220-066
220-067
220-068
220-069
220-070
220-071
220-072
220-073
220-074
220-075
220-076
220-077
220-078
220-079
220-080
220-081
220-082
220-083
220-084
220-085
With stainless steel
housing part no.
Number
Valves*
907-345
907-346
907-347
907-348
907-349
4
6
8
10
12
Color change valve
low pressure
220 060
Color change valve
low pressure
907 438
692 024
Color change valve
High pressure
* = in normal use there is one valve for air and
one valve for solvents
832 503
Model 907 349
17/02/09
7-5
308-977
308-291
PROBATCH – Electronic batch dispensing system
Adapter
floor mount
Paint Shield
Valve Kit
Calibration
weight
116 542
244 382
244 383
244 384
197 502
197 902
Barrier Kit
ProBatch
Barrier Kit
Printer
Pro-Batch
244 510
244 534
Ref No.
Description
244-440
Pro-Batch 3-fluid
Three valves for up to three fluids
One 3.2 mm Ø valve and two 6.35 mm Ø valves
Pro-Batch 6-fluid
Six valves for up to six fluids
Two 3.2 mm Ø valve and two 6.35 mm Ø valves
244-441
Manual
PrecisionView AMR 2.0, Software accessories for external control/networking
243-377
243-378
243-379
244-534
115-769
244-778
115-770
116-542
197-502
239-873
514-037
244-510
197-902
244-983
244-382
244-383
244-384
244-792
244-385
244-386
244-387
114-124
Single station license
License for up to 5 stations
License for up to 31 stations
Pro-Batch barrier kit, for use with AMR in hazardous environment incl. 15 m cable
152 m Beldon 9841 Network Cable
Converter kit with power supply RS 485 to RS232 (PC connection)
304 m Beldon 9841 Network Cable
Calibration weight 10 kg, official weight for calibration of the scale
Housing kit, allows the operator to view the screen at a 45° angle
Printer kit, including printer 113774 and 7.6 m long printer network cable 192-491
Printer paper
Printer barrier kit, if Pro-Batch is used in hazardous areas,
includes 13.7 cable and ground stud with wire
Protective shield for display; this transparent shield is supplied in a pack of 10
and protects the viewing area of the control unit from dirt
Accessory kit, used for highly viscose fluid, order dispense valve separately
Auto dispense valve, 3.2 mm stainless steel needle/tip
Auto dispense valve, 6.35 mm stainless steel needle/tip
Auto dispense valve, 6.35 mm stainless steel needle/tip for acid-catalyzed fluids
Dispense valve mounting kit/without valves, comprising regulator, mounting hardware, tubing
Needle/tip kits for auto dispense valves
Needle/tip kit stainless steel 3 mm
Needle/tip kit stainless steel 6.35 mm
Needle/tip kit special stainless steel (for acid-catalyzed fluids) 6.35 mm
Air filter ⅜″ NPT, 5 Micron
17/02/09
7-6
309-300
309-300
309-218
325-018
309-313
308-818
309-313
309-397
306-715
306-715
306-715
306-715
306-715
306-715
306-715
306-715
GEAR METERS & FLOW METERS – INFORMER
G3000 / G250 / HG6000 / Coriolis / Piston
Informer with Flowmeter
G3000 (HR)
Flowmeter
G3000 (HR)
Fig. electr. connection
243 312
234 105
Informer lead
239 716
244 292
Informer
948 924 (15m)
948 926 (30m)
948 928 (45m)
Informer
Tube fixing
243 310
243 316
243 317
243 313
243 314
243 315
Converter
Module
Power
supply 12DC
Flowmeter
G250 (HR)
Coriolis
249 426
249 427
116 158
15D 135
17/02/09
244 773
244 774
244 775
244 776
195 013
195 638
Fig. elect. connection
Interface Box
7-7
Piston
HG 6000 (HR/HT)
116 161
246 190
246 652
246 340
GEAR METERS & FLOW METERS – INFORMER
G3000 / G250 / HG6000 / Coriolis / Piston
Part No.
244 292
239 716
234 106
243 554
234 105
243 312
243 310
243 316
243 313
243 314
243 315
243 317
948 924
948 926
948 928
244 773
244 774
244 775
Description:
Flowmeter G3000 (HR) Hazardous area power supply with barrier
Manual
G3000 HR,
276 bar, 20-3000 CPS,
38 – 1.900ccm/min,
308 778
G3000,
276 bar, 20-3000 CPS,
75 – 3.800ccm/min,
(300 548)
G3000 HR
with cable kit 248 924
G3000
309 102
G3000 HR
G3000
Informer (Display) for fixed connection to the Flowmeter
Informer wall mount
243 316 + 243 554 = 6 880295
Informer to connect to tube ½“ (pipe mount)
243 313 + 243 554 = 6 880292
Informer to connect to tube 3/4“ (pipe mount)
243 314 + 243 554 = 6 880293
Informer to connect to tube 1“
(pipe mount)
243 315 + 243 554 = 6 880294
Informer to mount on DIN-rail (rail mount)
243 317 + 243 554 = 6 880296
Cable + connector from measuring cell to Informer
15 m
for remote assembly
30 m
45 m
Interface Box Non-hazardous area with power supply 24VDC (116 601), max 10 Informers
Interface Box Non-hazardous area with power supply 24VDC & isolator/repeater, max 10 Informers
309 366
Interface Box Hazardous area with power supply 12VDC (116 960)
& barriers network/signal max 2 Informers
Interface Box Hazardous area with supply 12 VDC & barriers network/signal
244 776
& isolator/repeater max 2 Informers
195 638
DC power supply for Informer & conversion kit 244 778
514 895
Barriers for 195 638
244 778
Conversion kit from RS232 to RS 485 = (195 638 + 195 013 + 514 001)
195 013
RS 485 Converter module
not shown
111 985
Barriers G3000 (HR)
not shown
195 867
Protective adhesive film display Informer (qty 10)
243 552
Rep Kit Informer
Display diaphragm switch (diaphragm – display switch)
309 111
243 551
Rep Kit Informer
LCD display
309 110
243 550
Rep Kit Informer
Board
309 109
243 549
Upgrade Kit Firmware Informer
309 108
not shown
244 107
AMR 2.0 (Precision View) for one station, (only Informer)
not shown
244 108
AMR 2.0 (Precision View) for five stations, (only Informer)
115 769 not shown
Beldon 9841 network cable 152 m
115 770 not shown
Beldon 9841 network cable 304 m
not shown
115 838
Fuse 0.1 amp for informer input and outputs
Use G3000 in hazardous area
Basic model
Battery
Supply external 12V
9V Block
243 312
234 105
Version “remote
supply”
239 716 + Display
Part No.
249 426
249 427
Part No.
246 190
246 652
246 340
Part No.
116 158
15D 135
Part No.
116 161
Battery
Ext. power
supply
No
No
Yes
Yes
Possible
Possible
Battery
Supply external 24V
Hazardous approved
Interface
No
Yes
Only with barriers
Yes
Flowmeter G250 (HR)
17 bar, 20-3000 CPS,
17 bar, 20-3000 CPS,
Flowmeter HG 6000 (HR/HT)
410 bar, 30-1,000,000 CPS,
410 bar, 30-1,000,000 CPS,
410 bar, 30-1,000,000 CPS,
Flowmeter Coriolis
345 bar, 1-2000 CPS,
160 bar, 1-2000 CPS,
Flowmeter meter
210 bar, 0.3-20 CPS,
7-8
Yes
Yes
Interface
External power
supply
Only with barriers
Only with barriers
Yes
Yes
Description
G250
G250 HR
Description
HG 6000
HG 6000 HR
HG 6000HT
Description
Coriolis
Coriolis
Description
Piston type
17/02/09
Hazardous approved
Battery
Manual
308 778
308 778
75 – 3.800ccm/min,
38 – 1.900ccm/min,
50 – 22.712ccm/min
25 – 7.571ccm/min
50 – 22.712 ccm/min,
82 Cº
82 Cº
204 Cº
309 834
309 834
309 834
40 – 2000ccm/min,
40 – 2000ccm/min,
309 234
309 234
40 – 10.000cc/min
309 148
DISPENSING UNITS - PR 70
Operation & Maintenance
Tank / Feed System
Dispense Valve MD2
Heat control Tank / Hose
Manual: 312 393
Manual: 312 394
Manual: 312 185
Manual: 312 413
Technical data:
Metering Pump:
Max Stroke:
Min Stroke:
Volume per Stroke:
Ratio (Fixed):
Max. Pressure:
Max. Cycle rate:
Max temp.:
Air inlet:
™
Order the PR70
with the configuration
Example:
Accessories:
Part No.
120910
120876
LC0027
LC0028
LC0029
LC0033
LC0110
LC0111
LC0091
LC0092
120992
121021
LC0093
LC0094
LC0095
LC0096
LC0097
LC0098
LC0099
LC0100
LC0008
Description
Switch ON/OFF with fuse 4A F 250VAC
Power Supply 24V DC / 40W / 100-240V AC in
Relief Valve
Low-Level Sensor PE-tank
Low-Level Sensor SST - tank (long)
Low-Level Sensor SST - tank (short)
Transducer, linear, PR70S
3,0° Air Cylinder
4,5° Air Cylinder
3,0° Air Cylinder repair kit (4 pieces O-Ring)
4,5° Air Cylinder repair kit (4 pieces O-Ring)
Muffler Air, flow control, ¼” NPT
Muffler Air, bronze, ¼” NPT
Check Valve repair kit (ball / seat / guide / spring)
Rear Pump seal repair kit (O-Ring / Ring RET / Posipak)
Nitrogen kit for 30 litre and 60 litre tank (1 tank)
Nitrogen kit for 30 litre and 60 litre tank (2 tank)
Desiccant Dryer, 3/8” NPT with adapter and cartridge
Desiccant Dryer refile cartridge
Vacuum transfer pump 120V
Vacuum transfer pump 240V
Cord I/O interface and foot switch part
17/02/09
7-9
80 – 960 mm² per side
38,1 mm
5,8 mm
2 – 70 cm³
1:1 – 12:1
207 bar 3000psi
30 / min
50˚C nylon / 70˚C PE
¼” NPT (f) / max 7bar
PR 70 HOSE & FITTINGS REPLACEMENT KITS
Graco No.
LC0801
LC0802
LC0803
LC0804
LC0805
LC0806
LC0807
LC0808
LC0809
LC0810
LC0811
LC0812
LC0813
LC0814
Description
Hose assy. 3/16”
Hose assy. 3/16”
Hose assy. 3/16”
Hose assy. 1/4”
Hose assy. 1/4”
Hose assy. 1/4”
Hose assy. 3/8”
Hose assy. 3/8”
Hose assy. 3/8”
Hose assy. ½”
Hose assy. ½”
Hose assy. ½”
Hose assy. ¾”
Hose assy. ¾”
Pos
1+2+3+4
1+2+3+4
1+2+3+4
1+2+3
1+2+3
1+2+3
1+2+3
1+2+3
1+2+3
1+2+3
1+2+3
1+2+3
1+2+3
1+2+3
Graco No.
Graco No.
GNV 05486
GNV 05480
GNV 05482
GNV 05523
GNV 05515
GNV 05519
GNV 05553
GNV 05547
GNV 05550
GNV 05594
GNV 05587
GNV 05590
GNV 05618
GNV 05621
Description
Hose 3/16 - 30”
Hose 3/16 - 120”
Hose 3/16 - 180”
Hose 1/4 - 30”
Hose 1/4 - 120”
Hose 1/4 - 180”
Hose 3/8 - 30”
Hose 3/8 - 120”
Hose 3/8 - 180”
Hose ½ - 30”
Hose ½ - 120”
Hose ½ - 180”
Hose 3/4 - 120”
Hose 3/4 - 180”
Pos
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Graco No.
Graco No.
GNV 07533
GNV 07536
GNV 07538
GNV 07540
GNV 07542
121 041*
121 042*
121 043*
121 044*
94/1000/98*
J6900040*
94/1007/98*
94/1009/98*
94/1083/98*
94/0488/98*
Description
Elbow 90 Grad
Elbow 90 Grad
Elbow 90 Grad
Elbow 90 Grad
Elbow 90 Grad
Elbow 45 Grad
Elbow 45 Grad
Elbow 45 Grad
Elbow 45 Grad
Adapter 3/16 “
Adapter 1/4 “
Adapter 3/8 “
Adapter ½ “
Adapter ¾ “
Bushing
Pos
2
2
2
2
2
5
5
5
5
3
3
3
3
3
4
30”
120”
180”
30”
120”
180”
30”
120”
180”
30”
120”
180”
120”
180”
3/16 “
1/4 “
3/8 “
½“
¾“
1/4 “
3/8 “
½“
¾“
Pos
↓ ↓ ↓ ↓
LC0826
LC0827
LC0828
LC0829
LC0830
LC0831
LC0832
LC0833
LC0834
LC0835
LC0836
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
½”
½”
½”
¾”
¾”
30”
120”
180”
30”
120”
180”
30”
120”
180”
120”
180”
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
1+2+3+5
Description
Heated hose
Pos
↓ ↓ ↓ ↓
LC0838
LC0840
LC0842
LC0844
LC0846
LC0848
LC0850
LC0852
LC0854
LC0856
LC0858
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
Hose assy.
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
½”
½”
½”
¾”
¾”
5
2
* Liquid control no.
17/02/09
Description
Heated hose assembly
7-10
30”
120”
180”
30”
120”
180”
30”
120”
180”
120”
180”
1
1
1
1
1
1
1
1
1
1
1
1
3
4
PR 70 PISTON REPLACEMENT KITS
Nylon
UHMWPE
Part.No
Figure
Pos.1
Pos.2
Pos.3
Pos.4
Part.No
Figure
Pos.1
Pos.2
Pos.3
Pos.4
LC1080
LC1100
LC1120
LC1140
LC1160
LC1180
LC1200
LC1220
LC1240
LC1260
LC1280
LC1300
LC1320
LC1340
LC1360
LC1400
LC1420
LC1440
LC1480
LC1520
LC1560
LC1600
LC1640
LC1720
LC1800
LC1880
LC1960
1
1
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
LCC080
LCC100
LCC120
LCC140
LCC160
LCC180
LCC200
LCC220
LCC240
LCC260
LCC280
LCC300
LCC320
LCC340
LCC360
LCC400
LCC420
LCC440
LCC480
LCC520
LCC560
LCC600
LCC640
LCC720
LCC800
LCC880
LCC960
LCB080
LCB100
LCB120
LCB140
LCB160
LCB180
LCB200
LCB220
LCB240
LCB260
LCB280
LCB300
LCB320
LCB340
LCB360
LCB400
LCB420
LCB440
LCB480
LCB520
LCB560
LCB600
LCB640
LCB720
LCB800
LCB880
LCB960
15M089
15M089
----15M099
15M099
15M099
15M099
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M101
15M101
15M101
15M101
15M101
15M101
15M101
--------15K887
15K887
15K887
15K887
15K887
15K887
15K887
15K887
15K888
15K888
15K888
15K888
15K888
15K888
15K888
15K888
15K888
15K888
15K890
15K890
15K890
15K890
15K890
LC2160
LC2180
LC2200
LC2220
LC2240
LC2260
LC2280
LC2300
LC2320
LC2360
LC2400
LC2440
LC2480
LC2520
LC2560
LC2600
LC2640
LC2720
LC2800
LC2880
LC2960
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
LCC160
LCC180
LCC200
LCC220
LCC240
LCC260
LCC280
LCC300
LCC320
LCC360
LCC400
LCC440
LCC480
LCC520
LCC560
LCC600
LCC640
LCC720
LCC800
LCC880
LCC960
LCA160
LCA180
LCA200
LCA220
LCA240
LCA260
LCA280
LCA300
LCA320
LCA360
LCA400
LCA440
LCA480
LCA520
LCA560
LCA600
LCA640
LCA720
LCA800
LCA880
LCA960
15M099
15M099
15M099
15M099
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M100
15M101
15M101
15M101
15M101
15M101
15M101
15M101
15K887
15K887
15K887
15K887
15K887
15K887
15K887
15K887
15K888
15K888
15K888
15K888
15K888
15K888
15K888
15K888
15K890
15K890
15K890
15K890
15K890
120933
120874
O-Ring
Screw
Pos.5
Pos.6
Figure 1
Figure 3
l
Figure 2
17/02/09
7-11
PR 70 MIXER AND SHROUD
Part No.
LC0063
LC0057
LC0058
LC0059
LC0060
LC0061
LC0062
LC0077
LC0078
LC0079
LC0080
LC0081
LC0083
LC0082
LC0084
LC0085
LC0086
LC0087
LC0088
LC0089
LC0090
Description
Mixer 10 pieces with shroud
3/16” x 32
10 Mixers with shroud
¼” x 24
3/8” x 24
3/8 “ x 36
3/8” combo 10 Mixers with shroud
3/16” x 32 Luer Lock 10 Mixers with shroud and sleeve
¼” x 24 Luer Lock 10 Mixers with shroud and sleeve
Mixer 50 pieces
3/16” x 32
50 Mixers
¼” x 24
50 Mixers
3/8” x 24
50 Mixers
3/8 “ x 36
50 Mixers
3/8” combo 50 Mixers
¼” x 24 Luer Lock 50 Mixers
3/16” x 32 Luer Lock 50 Mixers
Mixer 250 pieces
3/16” x 32
250 Mixers
¼” x 24
250 Mixers
3/8” x 24
250 Mixers
3/8 “ x 36
250 Mixers
3/8 “ combo 250 Mixers
¼” x 24 Luer Lock 250 Mixers
3/16” x 32 Luer Lock 250 Mixers
Sleeve
Shrou
Mixer
PR 70 MD2 VALVE
Manual: 312 185
Technical data:
Fluid inlet:
Fluid outlet:
Air inlet:
Part No.
15V628
255179
255180
255181
255182
255206
255208
255249
LC0008
255217
255218
255219
255220
9/16-18UNF(f)
7/8-9 bell
1/8” NPT (f) max 8,4 bar
Description
1:1 Soft seat, adjustable snuff back
1:1 Hard seat, non-adjustable snuff back
Wide ratio, soft seat, adjustable snuff back
Wide ratio, hard seat, non-adjustable snuff back
Handel MD2 Air trigger 8,4 bar
Handel MD2 electric air actuated
3A @ 28V DC
Handel MD2 electric actuated lever 0,5A @ 28V DC
Cord1/0 Interface with footswitch port (4m) second input switch
MD2 rebuild kit, air cylinder
MD2 repair kit, back end of wet section (no needle or seat)
MD2 Soft Seat repair kit, needle and nose
MD2 convert Soft Seat repair kit, hard seat rebuild needle and nose
MD2 Valve
electric switch valve
Handle MD2
Kit second input switch
17/02/09
7-12
pneumatic valve
PR 70 TANK / FEED SYSTEM
Part No.
255241
255281
Manual: 312 394
Description complete units 8 Litre PE
Dual Tank PE 8 litre complete, (without agitator)
Dual Tank PE 8 litre complete, with shutoff ball valve, (without agitator)
LC0156
255250
LC0126
Dual Tank PE 8 litre complete, with one agitator pneumatic
Dual Tank PE 8 litre complete, with one agitator 120V
Dual Tank PE 8 litre complete, with one agitator 240V
LC0158
255282
LC0128
Dual Tank PE 8 litre complete, with one agitator pneumatic ,shutoff ball valve
Dual Tank PE 8 litre complete, with one agitator 120V, shutoff ball valve
Dual Tank PE 8 litre complete, with one agitator 240V, shutoff ball valve
LC0157
255251
LC0127
Dual Tank PE 8 litre complete, with two agitator pneumatic
Dual Tank PE 8 litre complete, with two agitator 120V
Dual Tank PE 8 litre complete with two agitator 240V
LC0159
255283
LC0129
Dual Tank PE 8 litre complete, with two agitator pneumatic, shutoff ball valve
Dual Tank PE 8 litre complete, with two agitator 120V, shutoff ball valve
Dual Tank PE 8 litre complete with two agitator 240V, shutoff ball valve
Part No.
255479
255480
255481
15K840
LC0027
255280
255503
255246
255730
Description accessories
Dual kit Tank – (hopper) without mounting holes for agitator
Dual kit Tank – (hopper) with one side mounting holes for agitator
Dual kit Tank – (hopper) with both side mounting holes for agitator
Gasket Nitrile Ø 600mm (between tank and lid)
Low-Level Sensor PE-tank
Shut of ball valve
Agitator Kit 240V (for 8 litre PE-Tank)
Agitator Kit 120V (for 8 litre PE-Tank)
Pneumatic Agitator (for litre PE-Tank)
Agitator
electric shown
Gasket
15K840
Dual Tank
8 Litre PE
Shut of ball valve
255 280
8 Litre / PE
Flange 1-1/2” NPT
17/02/09
7-13
STAINLESS STEEL TANKS 3 L - 7.5 LITRES
SST
3L
SST
3L
SST
7,5L
SST
7,5L
&
heater
SST
7,5L
SST
7,5L
&
heater
LC0013
255 285
LC0012
LC0016
255 284
LC0017
255 280
LID ASSEMBLIES
Clamp Down Lid
Clamp Down Lid
with degas
Clamp Down lid
with agitator
Clamp Down Lid
with degas &
agitator
LC0019
LC0018
Accumulator
LC0133
LC0134
LC0020
Clamp Down Lid
with pneumatic
agitator
LC0130
Agitator
blade assy.
255 399
17/02/09
Manifold
Vacuum tree
255342
7-14
LC0021
LC0022
Clamp Down Lid
with pneumatic
agitator & vacuum
LC0131
LC0023
LC0024
Clamp Down Lid
with pneumatic
agitator & vacuum
& fill in port
LC0132
Part No.
LC0013
255285
LC0012
255284
LC0016
LC0017
LC0018
LC0019
LC0020
LC0021
LC0022
LC0023
LC0024
LC0025
LC0026
LC0130
LC0131
LC0132
255337*
255338*
255339
255342
Description
Single Tank SST 3 litre
Single Tank SST 3 litre, shut of ball valve
Single Tank SST 7,5 litre
Single Tank SST 7,5 litre, shut of ball valve
Single Tank SST 7,5 litre , heater 230V
Single Tank SST 7,5 litre , heater 230V , shut of ball valve
Lid assembly dust cover
Lid assembly 7,5L, clamp down
Lid assembly 7,5L, clamp down with vacuum degas
Lid assembly 7,5L, with electric agitator 120V
Lid assembly 7,5L, with electric agitator 240V
Lid assembly 7,5L, with electric agitator 120V and degas
Lid assembly 7,5L, with electric agitator 240V and degas
Lid assembly 7,5L, with electric agitator 120V, degas and fill port
Lid assembly 7,5L, with electric agitator 240V, degas and fill port
Lid assembly 7,5L, with pneumatic agitator
Lid assembly 7,5L, with pneumatic agitator and degas
Lid assembly 7,5L, with pneumatic agitator, degas and fill port
Agitator motor Kit 120V
Agitator motor Kit 240V
Agitator blade assembly 7,5L
Manifold assembly vacuum tree
255280
Shut of valve
LC0028
Low-Level Sensor SST - tank (long)
LC0029
Low-Level Sensor SST - tank (short)
LC0133
Accumulator viton (Rep Kit LC0154)
LC0134
Accumulator EP
(Rep Kit LC0155)
*not shown
17/02/09
7-15
OFF-BOARD 30 L / 60 L
SST TANK ASSEMBLY
LC0042
LC0043
LC0102
LC0101
LC0054
LC0055
LC0104
LC0105
255 391
LC0044
LC0045
LC0046
LC0047
LC0051
LC0049
LC0142 (30Liter)
LC0143 (60Liter)
LC0144 (30Liter)
LC0145 (60Liter)
LC0146 (30Liter)
LC0147 (60Liter)
LC0048
LC0050
17/02/09
LC0052
7-16
Part No.
Description
Tank:
LC0054
30 Litre Tank assembly
LC0055
60 Litre Tank assembly
LC0104
30 Litre Tank assembly, with heat
LC0105
60 Litre Tank assembly, with heat
Lid:
LC0042
30 Litre Clamp Down Lid
LC0101
60 Litre Clamp Down Lid
LC0043
30 Litre Clamp Down Lid, with degas
LC0102
60 Litre Clamp Down Lid, with degas
LC0044
30 Litre Lid assembly, with electric agitator
LC0045
30 Litre Lid assembly, with electric agitator and Vacuum degas
LC0046
30 Litre Lid assembly, with electric agitator, Vacuum degas and fill in port
LC0047
30 Litre Clamp Down Lid, with electric agitator
LC0048
60 Litre Clamp Down Lid, with electric agitator
LC0049
30 Litre Clamp Down Lid, with electric agitator and vacuum degas
LC0050
60 Litre Clamp Down Lid, with electric agitator and vacuum degas
LC0051
30 Litre Clamp Down Lid, with electric agitator, vacuum degas and fill in port
LC0052
60 Litre Clamp Down Lid, with electric agitator, vacuum degas and fill in port
LC0142
30 Litre Lid assembly, with pneumatic agitator
LC0143
60 Litre Lid assembly, with pneumatic agitator
LC0144
30 Litre Lid assembly, with pneumatic agitator and vacuum degas
LC0145
60 Litre Lid assembly, with pneumatic agitator and vacuum degas
LC0146
30 Litre Lid assembly, with pneumatic agitator, vacuum degas and fill in port
LC0147
60 Litre Lid assembly, with pneumatic agitator, vacuum degas and fill in port
Accessories:
255391
Feed System
LC0119*
Thermo well assembly
255386*
Agitator Motor assembly
255384*
Manifold ¾” vacuum tree
* not shown
17/02/09
7-17
HOT MELT GUNS
249 513
249 514
244 962
249 512
244 909
244 951
297 274
249 515
297 273
244 535
244 907
244 937
Valve cross section
197 842 fllange
18,3
3/8“NPT(I)
C32 089
C17 009
C01 025
C17 009
270 xxx
11,9
198 324
Adapter
3/8”NPT(A)
198 323 Ü Mutter
11/8”-12 UNF-2B
Montage
EnDure an Swirl
Part No.
description
249 514
249 512
249 513
249 515
297 273
297 274
C34 005
C34 007
244 910
Hot-Melt Gun, connections below without limit switch,
230/240 Volt, 241 bar
Hot-Melt Gun, connections below with limit switch,
230/240 Volt, 241 bar
Hot-Melt Gun, connections above with limit switch,
230/240 Volt, 241 bar
Hot-Melt Gun, connections above without limit switch
230/240 Volt, 241 bar
Hot-Melt Gun, connections above with limit switch,
230/240 Volt, 241 bar,
230/240 Volt, 241 bar,
Hot-Melt Gun, connections below without limit switch,
120 Volt
120 Volt
EnDure automatic Gun without heating, warm water circulation possible, opening/closing
pneumatically, ½”NPT(f) inlet, 1/8” NPT(f) in nozzle adapter, without adapter 5/8”-18UNF-2A
outlet, 241 bar max fluid working pressure, max 95°C, basic unit 244 535
EnDure automatic gun 230 V, 200 watt with 8 pole plug (square), opening / closing
pneumatically , ½”NPT(f) inlet, 1/8” NPT(f) in nozzle adapter, without adapter 5/8”-18UNF-2A
outlet, 241 bar max Fluid working pressure, max 95°C, basic unit 244 535
Same as 244 962 but 120 Volt, 150 watt with6 pole plug (round)
EnDure automatic gun 230 V, 200 watt with 8 pole plug (square), opening / closing
pneumatically , ½”NPT(f) inlet, 1/8” NPT(f) in nozzle adapter, without adapter 5/8”-18UNF-2A
outlet, 241 bar max Fluid working Pressure, max 95°C- 204°C, basic unit 244 937
Same 244 909 but 120 Volt, 150 Watt with 6 pole plug (round)
EnDure automatic gun 230 V, 200 watt with 8 pole plug (square), opening/closing
pneumatically , ½”NPT(f) inlet, ½ ” NPT(f) outlet, 241 bar max fluid working pressure, max
95°C- 204°C, basic unit 244 937
Same 244 951 but 120 Volt, 150 watt with 6 pole plug (round)
244 962
244 961
244 909
244 908
244 951
Manual
245 184
Accessories:
C32 089
Nozzle adapter ⅝″-18 UNF–2A x ⅛″ NPT(f) outlet for extrusion nozzle
617 585
Nozzle union nut ⅝″-18 UNF-2A for stream-spray nozzles (270 025 to 270 065)
C17 009
Extrusion nozzle ⅛″ NPT(m) orifice 3,2 mm (⅛″)
C32 003
Extrusion nozzle ¼″ NPT(m) orifice 3,2 mm
C01 025
Extrusion nozzle ⅛″ NPT(m) orifice 2,4 x 9,5 mm (3/32 x ⅜″)
06.02.2009 12:29
8-1
311 209
309 962
309 376
309 376
309 376
PRECISIONFLO & PRECISIONSWIRL
CONFIGURATOR
PrecisionFlo LT Standard,
PrecisionFlo LT Advanced,
PrecisionFlo XL, control box,
see configuration
see configuration
see configuration
Manual
309 738
309 734
309 374
from 684054 and 305483
Example:
Pflo XL F-
: 1- N -1 - N- 2 - 1 - N - 3 -1- 2 - N - N - N - N - N - 1 - 2 - N - N - N - N -N
code
: A B C
D E
F
G
H J K
L
M
N
PrecisionFlo™
XL Metering module
P
R
S
T
V
W
X
Y Z
Precision Swirl™
module
Part No.
Description
Manual
241 658
PrecisionSwirl module
incl. 233 123, 617 870, 617 829, 243 403 und 918 616
310 554
233 125
233 124
233 123
617 870
617 829
243 402
243 403
918 616
Cable, Motor flexible 1,8 m
Cable, Motor 16,8 m
Cable, Roboter 12,2 m
Orbital-outlet swirl, orifice 0,30 mm, gun mounting
Orbital-outlet swirl, orifice 0,71 mm, gun mounting
Operating box, cabinet
PrecisionFlo XL Metering module
PrecisionFlo XL module, Fluid plate, low viscosity
PrecisionFlo XL module, Fluid plate, high viscosity
PrecisionFlo XL module, Fluid plate, high viscosity, Helical D-meter, mastic regulator
PrecisionFlo XL dispense valve – PVC application, electric Regulator low flow
PrecisionFlo XL dispense valve
HG 6000 spindle volume meter
50 – 22712 cc/min max 82°C
(K-factor 0,286)
HG 6000HR spindle volume meter 25 – 7571 cc/min max 82°C
(K-factor 0,143)
HG 6000 HT same like 246190 but with heater, max 204°C, 240 Volt , 400 Watt
Automatic valve, snuffer-principle , ¾″-16, 37° JIC outlet, ½ ″ inlet. tempering ¼″
Automatic valve, snuffer-principle, P-Swirl orbiter, outlet 45° ¼ ″NPT(I) or ¾″-16 UNF(A)
Automatic valve, snuffer-principle, PrecisionFlo™, outlet straight ¼″NPT(I) or ¾-16 UNF(A)
other valve see EnDure Hot-Melt and manual 308 876
Filter module
Extrusion nozzle ¼″ NPT(A), orifice 4 mm
Stream-spray nozzle set incl.: nozzle adapter C32 089 ⅛″, extrusion nozzle C08 064, nozzle union
nut 617 585, ⅝″-18UNF-2A and stream nozzle 270 027, 270 029 and 270 031 (nozzle with one
orifice)
Multiple orifice stream nozzle 6x orifice a 0,53mm, can be used with multiple orifice air cap 220960
Swirl nozzle 0,69 mm orifice, standard equipment, see instruction for further information
Injector valve ¼“ NPT(I) und ¼“NPT(A)
233 654
233 673
245 315
244 920
244 921
246 190
246 652
246 340
918 545
243 482
243 666
C59 725
C08 179
C59 593
C08 224
918 607
947 937
Max. viscosity
1million
CPS
246 190
246 652
246 340
06.02.2009 12:29
244 920
244 921
243 482
8-2
243 666
918 545
309 403
309 375
309 382
309 834
310 539
308 876
308 969
309 403
ELECTROSTATIC GUNS
PRO Xs AA Nozzle (order separately )
Fluid flow (l/min)
Ø
mm
0,18
0,23
0,28
0,33
0,38
0,43
0,48
0,53
0,58
0,63
spraywidth
lowviscosity
(250cp)
50-100
100-150
150-200
50-100
100-150
150-200
200-250
50-100
100-150
150-200
200-250
250-300
300-350
50-100
100-150
150-200
200-250
250-300
300-350
50-100
100-150
150-200
200-250
250-300
300-350
350-400
400-460
100-150
150-200
200-250
250-300
300-350
400-460
150-200
200-250
250-300
300-350
350-400
200-250
250-300
300-350
350-400
200-250
250-300
300-350
200-250
300-350
highviscosity
(56000cp)
0,1
0,2
0,3
0,4
0,5
0,7
0,5
0,8
0,6
1,0
0,8
1,2
0,97
1,5
1,2
Nozzle
No.
GG3–107
GG3–207
GG3–307
GG3–109
GG3–209
GG3–309
GG3–409
GG3–111
GG3–211
GG3–311
GG3–411
GG3–511
GG3–611
GG3–113
GG3–213
GG3–313
GG3–413
GG3–513
GG3–613
GG3–115
GG3–215
GG3–315
GG3–415
GG3–515
GG3–615
GG3–715
GG3–815
GG3–217
GG3–317
GG3–417
GG3–517
GG3–617
GG3–817
GG3–319
GG3–419
GG3–519
GG3–619
GG3–719
GG3–421
GG3–521
GG3–621
GG3–721
GG3–423
GG3–523
GG3–623
GG3–425
GG3–625
XS-2
XS-3
(7Bar)
(7Bar)
244 400
244 579
244 399
Auto XS
XS-4
(7Bar)
(7Bar)
244 589
244 590
244 591
244 401
244 580
XS-3
XS-3
(7Bar)
(7Bar)
244 581
244 582
244 575
244 576
XS-4 AA
XS-4 AA
(207Bar)
(207Bar)
Viscosity – low
75.000cp
<
Viscosity – medium < 150.000cp
Viscosity – high
< 1.000.000cp
244 572
244 573
244 592
IsolationsSystem
WB 100
246 592
246 593
246 511(without hose and gun)
06.02.2009 12:29
Standard Modell
8-3
Smart Modell
ELECTROSTATIC GUNS
244 399
244 400
244 579
244 575
244 576
244 581
244 582
244 401
244 580
244 589
244 590
244 591
244 572
244 573
244 592
Manual
PRO Xs2, Electrostatic hand spray gun with integrated alternator 20 KV,
Power Points Design 1,5mm fluid nozzle, air cap 197 477, air inlet ¼″ NPS(m), fluid inlet 3/8”″ NPS(m)
Left thread, material resistance , 7 – 150 MΩ cm, air requirement 390-530 L/min
PRO Xs3, Electrostatic hand spray gun with integrated alternator 60 KV,
1,5 mm fluid nozzle, air cap 197 477, air inlet ¼″ NPS (m) Left thread, fluid inlet 3/8”″ NPS(m) R3/8-15,
material resistance 25 MΩ cm to ∞, air requirement 390-530 L/min,
PRO Xs3 Same as 244 400 but with Smart Display and variable voltage range
PRO Xs3, Same as 244 400 but for conductive materials (e.g. metallic with low resistance), 7 MΩ CM to ∞
PRO Xs3 Same as 244 400 but with Smart Display and variable voltage range, for conductive materials
(e.g. metallic with low resistance), 7 MΩ cm to ∞
PRO Xs3, same as 244 400 but for water base materials.
Without fluid hose set (246 431 order separately), (for WB100)
PRO Xs3, same as 244 400 but with Smart Display and variable voltage range, for water base materials,
Without fluid hose set (246 431 order separately) , (for WB100)
PRO Xs4 Same as 244 400 but with integrated alternator 85KV,
PRO Xs4 Same as 244 400 but with integrated alternator 85KV, with Smart Display and variable voltage range,
309 294
T309 291
309 294
T309 292
309 293
309 294
T309 292
PRO Auto Xs, Electrostatic automatic spray gun with integrated alternator 85KV,
Alternator can also be set to 40,50, 60 or 70 KV , 1,5mm fluid nozzle, air cap 197 477,
PRO Auto Xs, Same as 244 589 but for conductive materials (e.g. metallic with low resistance),
PRO Auto Xs, Same as 244 589 but for water base materials, (for WB100),
Fitting/ hose order separately, see manual 309457 accessories,
309 457
PRO Xs4 AA Air-assisted Electrostatic hand spray gun with integrated alternator 85 KV,
Fluid pressure 207 bar, for conductive materials 7 MΩ cm to ∞,
Mention desired fluid nozzle size when ordering, without swivel,
PRO Xs4 AA Same as 244 572 but with Smart Display and variable voltage range,
309 296
T309 295
PRO Auto Xs Air-assisted Electrostatic automatic spray gun with integrated alternator 85 KV
Alternator can also be set to 40,50, 60 or 70 KV, Fluid pressure 207 bar.
Mention desired fluid nozzle size when ordering.
309 298
246 592
WB 100 system with PRO Xs3,
244 581, 7,5m hose set 235 070 and 246 431
246 593
WB 100 system with PRO Xs Smart,
244 582, 7,5m hose set 235 070 and 246 431
246 511
WB 100 system without gun and hose set
245 895
Accessory kit agitator
245 944
Accessory kit fluid regulator
Note: Air consumption turbine only !!! 200l/min
Note: Material resistively measured with Graco meter 722 886 and probe 722 860 (used together).
PRO Xs air guns
Fluid nozzle, see manual 309 419
Part No.
197 263
197 264
197 265
197 266
197 267
197 268
Round patter spray kit 245 282
For PRO Xs4 AA, Nozzle*
* = Select the required nozzle from the
following table (manual 309 448)
Orifice
0,75 mm
1,0 mm
1,2 mm
1,5 mm
1,8 mm
2,0 mm
Round patter spray set 245 298
For PRO Auto Xs AA, Nozzle*
* = Select the required nozzle from the
following table (manual 309 449)
Air cap, see also manual 309 419
Part No.
197 477
197 478
197 479
197 480
197 481
Type
Round / oval
Smal flow
Conic
Wide
2,0 nozzle only
Spray width
381 – 432
381 – 432
330 – 381
406 – 457
432 – 483
Round patter spray kit
For low to medium viscosity
(Manual 309 447)
PRO Xs2
PRO Xs3, Xs4
Set-No.
245 217
245 219
309 293
Spray width mm
Part
No.
Description
Spray
Width
mm
Flow at 40
bar in cc/min
Flow at*
80 bar in
cc/min
236 836
236 837
236 838
236 839
236 840
236 841
236 842
4A
6A
7A
5B
7B
8B
11B
229
254
254
356
330
305
279
120
150
160
230
270
350
480
170
220
230
330
420
530
700
* = for a low – viscosity medium (20 – 40 cps)
102-152 mm
203-254 mm
8- 4
ELECTROSTATIC GUNS – ACCESSORIES
OHM Meter
722 886
MegaOhm Meter
722 860
KV-Meter
241 079
236 003
Conductible band
Grip
Pro XS Guns
245 277
Mounting kit P150
Mounting Kit
Mounting
GunFlushBox
198 405
237 763
117 823 (small)
117 824 (medium)
117 825 (large)
245 270
245 271
245 263
245 264
fluid pressure
regulator
8,23mm
304,8mm
conversion kit
Pro Xs3
color valve
31,75mm
236 853
127mm
236 854
Fluid hose set
246 431
244 919
Brush
105 749
Swivel ¼” NPS
Swivel ¼” left
Air- Nipple
coupling
Valve Push Pull, fan
Trigger 4 finger
Pro Xs3/4
1,84
244 912
112 534
115 898
189 191
244 834
244 916
06.02.2009 12:29
8-5
ELECTROSTATIC GUNS - ACCESSORIES
Air hoses, grounded, ¼”-18NPSM (F), one end left thread
185 493
Nippel to connect two electrostatic air hose ¼″ left- x ¼″ right thread (electroless nickel)
098 030
Nippel to connect two electrostatic air hose ¼″ left- x ¼″ right thread
Length
Part No.
Description
Part No.
Description
Part No.
1,8 m
244 963
Air Flex
223 068
Standard
235 068
4,6 m
244 964
Air Flex
223 069
Standard
235 069
7,6 m
244 965
Air Flex
223 070
Standard
235 070
11,0 m
244 966
Air Flex
223 071
Standard
235 071
15,0 m
244 967
Air Flex
223 072
Standard
235 072
23,0 m
244 968
Air Flex
223 073
Standard
235 073
30,5 m
244 969
Air Flex
223 074
Standard
235 074
Air Flex:
Standard:
Water base:
PDM tube and cover material for high flexibility,
grey (061 413)
tube material mod. polyamide, cover urethane,
grey (061 268)
see for water base materials, tube material Polyurethane, inlet SST wire mesh, cover Polyurethane,
Description
Water base
Water base
Water base
Water base
Water base
Water base
Water base
red (061 290)
Part No.
Description
236 130
236 131
215 637
215 638
240 793
240 794
236 134
236 135
244 914
244 915
239 945
244 555
223 688
722 886
722 860
236 003
241 079
245 277
112 534
244 834
189 191
115 898
244 916
244 919
246 431
537 107
Whip end air hose 0,9 m, 4,5 mm I.D., 7 bar, only PRO AA4500 und Xs AA, (1/4-18NPSM) one end left thread
Whip end air hose 1,8 m, 4,5 mm I.D., 7 bar, only PRO AA4500 und Xs AA, (1/4-18NPSM) one end left thread
Fluid hose, Nylon, 8,0 m, 6,35 mm I.D., ⅜″ NPSM(F), max 16 bar
Fluid hose, Nylon, 15,0 m, 6,35 mm I.D., ⅜″ NPSM(F), max 16 bar
Nylon hose, 7,5 m, ¼″, ¼″ NPS (F), 227 bar
Nylon hose, 15,0 m, ¼″, ¼″NPS(F), 227 bar
Whip end hose, Nylon-Static-Free, 0,9 m, 3,2 mm I.D., ¼″ NPS (Male & Female ), 207 bar
Whip end hose, Nylon-Static-Free, 1,8 m, 3,2 mm I.D., ¼″ NPS (Male & Female ), 207 bar
Cover for PRO Xs2, contains 10 pieces
309 291
Cover for PRO Xs3, PRO Xs4 and PRO Xs4 AA, contains 10 pieces
309 294
Cover, PRO Auto Xs und PRO Auto Xs AA, contains 10 pieces (one pieces part No. 189 888)
309 298
Turbine alternator kit for Xs
309 292
Turbine alternator bearing kit, contains bearing frond and rear and propeller
308 034
Ohm meter (Mega ohmmeter Scale 0-50MΩ ) (incl. Battery 30V Part No.725 369)
307 263
Probe – to use with 722 886 – order separately
High voltage-test probe and KV Meter (90KV DC)
308 217
Mega ohmmeter 500 Volt DC, range 0,1 – 999MΩ
Test Equipment kit, contains 236 003, 245 278, Pro XS and Alternator mounting
309 455
Air line female coupler ¼″ left thread, 112 536 coupling only, 112 535 nipple only
Swivel max 7 bar (Air) ¼″ left thread,
Air inlet nipple, 100 mm long ¼″ left thread,
Swivel, 400 bar, ¼″NPS(m) x ¼″NPS(f), 46,7 mm long, PRO Xs AA and Auto
4 finger trigger conversion kit for PRO Xs3 and PRO Xs4
PRO Xs3 conversion kit, for PRO Xs3 for handle conductive material (e.g. metallic)
Fluid hose set, for water base material (PRO Xs3)
309 359
Fluid hose ¼″ inner diameter, PTFE, outer diameter 11,6mm, Polyurethane black, max 7 bar,
309 453
(300m bulk)
Cleaning brush, metal with 9 mm long brushes (white),
Glove, small
(A=105 mm) 12 pack
Glove, medium (A=120 mm) 12 pack (standard)
Glove, large
(A=128 mm) 12 pack
Handgrip, medium size
309 401
Handgrip, big version (for large hands)
Air valve, for quick adjustment of spray pattern, 2 positions (press in , pull out)
309 360
Conversion kit for ES-ON/OFF valve, sets to on permanently,
309 358
Mounting for PRO Xs3 and Xs4 in existing Gun Flush Box
309 227
Mounting for PRO Xs2 in existing Gun Flush Box
Mounting kit for PRO Xs air gun in Gun Flush Box
308 412
Mounting kit for PRO Xs AA–air assisted Airless hand gun in Gun Flush Box
Electrode kit, contains 5 pieces for Xs AA
309 400
Pressure pot 0,95 L, contains air regulator for gun air and pressure pot,
309 361
Pressure pot 1,9 L, contains air regulator for gun air and pressure pot,
105 749
117 823
117 824
117 825
245 263
245 264
244 912
244 913
198 405
198 787
245 270
245 271
244 917
244 731
287 301
236 854
236 853
245 324
237 763
236 917
236 919
236 921
224 682
180 060
Manual
Fluid pressure regulator pneumatic, max 7 bar, connect directly to PRO Auto Xs
Colour valve pneumatic max 21 bar, connects directly to Pro Auto Xs, for quick cleaning and colour
change
PRO Auto Xs conversion kit, for Auto Xs for handle conductive material (e.g. metallic)
Robot mounting kit PRO 5500, GMF150
kV-display, contain kV-display (189 762) a. 7,6 m fibre glass cable (224 672)
Fibre glass cable 7,5 m, connection between gun and display
Warn label, English, (F) France, (G) German, (H) Dutch, (I) Italy, (S) Spain
06.02.2009 12:29
8-6
308 098
309 297
308 576
308 265
308 265
FINEX AIR SPRAY GUNS
Manual: 312 388
(replaces LT-Series)
Gravity Feed Gun
289 237
289 238
289 239
289 240
289 241
289 242
289 243
289 244
289 245
289 246
289 256
289 257
289 258
289 259
289 260
Wetted Parts:
Aluminium, SST,
engineered plastic
Technical Data:
Max. air inlet pressure
Max. fluid working pressure
Air inlet
Fluid inlet pressure feed
Pressure Feed Gun
289 247
289 248
289 249
289 250
289 251
289 252
289 253
289 254
289 255
1/4-18.6
199 224
7 bar
7 bar
¼” npsm
3/8” npsm
0 - 43°
Special thread
3/8-18.6
Special thread
Accessories:
289 517
289 323
289 321
289 320
289 322
15G145
15G146
289 520
Hose:
239 631
239 636
239 637
239 622
239 633
239 634
Cup aluminium 125 cm³
Cup plastic 125 cm³
Cup plastic 600 cm³
Tool universal
Cleaning brush
Adapter M16x1,5 for mounting
3 M cups on Finex
1,2m
4,6m
7,6m
1,2m
4,6m
7,6m
Air whip hose
Air hose
Air hose
Fluid whip hose
Fluid hose
Fluid hose
2x
2x
2x
2x
2x
2x
199 224
1/4-18.6
Special thread
¼-18 NPSM (061346)
¼-18 NPSM (061346)
¼-18 NPSM (061346)
3/8-18NPSM (061345)
3/8-18NPSM (061345)
3/8-18NPSM (061345)
600
cm³
250
cm³
125
cm³
Wetted Parts:
Aluminium, SST,
engineered plastic
289 520
289 517 Alu
289 323 Plastic
289 321 Alu
06.02.2009 12:29
289 320 Alu
289 322Plastic
8-7
FINEX AIR SPRAY GUNS
Pressure Feed Standard HVLP
Part No.
289247
289248
289249
289250
Description
Finex Gun Pressure
HVLP
Nozzle
orifice
1,0
1,2
1,4
1,8
Pressure Feed Conventional
Part No.
289251
289252
289253
289254
289255
Description
Finex Gun Pressure
Conventional
Nozzle
orifice
0,8
1,0
1,2
1,4
1,8
Gravity Feed Mini-HVLP
Part No.
289256
289257
289258
289259
289260
Description
Finex Gun
Mini HVLP
Manual: 312 388
Accessories:
Needle
Packing kit.:
288891┼
Needle, Nozzle
Air Cap Kit
289301
289302
289303
289304
Gun
Body Kit:
Gun
Repair Kit:
Gravity
Cup Kit:
288894
288897
---
Needle, Nozzle
Air Cap Kit
289305
289306
289307
289308
289309
Gun
Body Kit:
Gun
Repair Kit:
Gravity
Cup Kit:
288894
288897
---
Needle, Nozzle
Air Cap Kit
289286
289287
289288
289289
289290
Gun
Body Kit:
Gun
Repair Kit:
Gravity
Cup Kit:
288892
288895
289323
(125cm³)
Needle, Nozzle
Air Cap Kit
289291
289292
289293
289294
289295
Gun
Body Kit:
Gun
Repair Kit:
Gravity
Cup Kit:
288893
288896
289322
(600cm³)
Needle, Nozzle
Air Cap Kit
289296
289297
289298
289299
289300
Gun
Body Kit:
Gun
Repair Kit:
Gravity
Cup Kit:
288893
288896
289322
(600cm³)
Accessories:
Needle
Packing kit.:
288891┼
Accessories:
Nozzle
orifice
0,6
0,8
1,0
1,2
1,4
Needle
Packing kit.:
288890┼
Gravity Feed Conventional Accessories:
Part No.
289242
289243
289244
289245
289246
Description
Finex Gun
Standard
Conventional
Nozzle
orifice
1,0
1,3
1,4
1,5
1,8
Gravity Feed HVLP
Part No.
289237
289238
289239
289240
289241
Description
Finex Gun
Standard
HVLP
Needle
Packing kit.:
288891┼
Accessories:
Nozzle
orifice
1,0
1,3
1,4
1,5
1,8
Needle
Packing kit.:
288891┼
┼ = SST
Accessories:
234941
234940
234942
150ml 3M PPS Cup and Collar
150ml 3M PPS Lid and Liner
150ml 3M PPS Measurement insert
(box of 8)
(box of 50)
(box of 100)
234771
234772
15F531
(box of 8)
(box of 50)
(box of 100)
234937
234938
234939
(box of 4)
(box of 25)
(box of 100)
15E469
Dispenser PPS Liners
Lid and liner
Cup and collar
06.02.2009 12:29
8-8
AIRPRO SPRAY GUNS Pressure Feed
Manual: 312 414
(replaces XT-Series)
Technical data:
Air inlet
7 bar
7 bar
¼” npsm
3/8” npsm
0 - 43°
Repair Kit:
289 455
Needle Packing repair kit
289 399
Gun repair kit
289 791
Air Cap seal kit (5 pieces)
289 143
Trigger repair kit (5 pieces)
289 407
Air Valve repair kit
289 016
Gun Body repair kit
288 986*
Bare Gun 3/8” npsm fluid inlet
289 419*
Bare Gun 1/4” npsm fluid inlet
289 794
Tool
* Without needle / nozzle / air cap
1/4-18.6
Special thread
Accessories:
239 802
239 803
239 804
240 266
235 117
234 784
235 119
192 407
15T 646
239 655
Hose:
239 631
239 636
239 637
239 622
239 633
239 634
0,95 Litre Pressure Cup SST single air regulator
0,95 Litre Pressure Cup SST double air regulator
0,95 Litre Pressure Cup SST remote air regulator
PE- Liners for 0,95 Litre Siphon cup (40packs)
1,9 Litre Pressure Cup ALU with air regulator and hose
Air Control Valve with gauge (gauge 108 190)
Gun Air Regulator assembly (gauge 110 436) (regulator 110 438)
Gun Holder (mounting)
Gun Holder Flush –Box (not shown)
Swivel 9/16-18UNF-2A - ¼ -18.6 special thread
1,2m
4,6m
7,6m
1,2m
4,6m
7,6m
Air whip hose
Air hose
Air hose
Fluid whip hose
Fluid hose
Fluid hose
2x
2x
2x
2x
2x
2x
308 791
308 791
308 791
308 791
308 791
310 692
308 791
¼-18 NPSM (061346)
¼-18 NPSM (061346)
¼-18 NPSM (061346)
3/8-18 NPSM (061345)
3/8-18 NPSM (061345)
3/8-18 NPSM (061345)
Cups SST-0,95Litre
192 407
239 802
239 803
06.02.2009 12:29
239 804 (0,95 Litre)
235 117 (1,9Litre)
8-9
235 119
234 784
239 655
Manual 312 414
Metal Spray Guns
Nozzle
(mm)
Viscosity
Conventional
Conventional
0,5
0,8
288930
Conventional
288931
Part
No
288726
288929
Spray Type
Light
Light
AirCap
Kit
289773
289773
Needle
+Tip
289270
289271
Nozzle
289061
289062
1,1
Light-medium
289773
289785
289063
Conventional
1,4
Light-medium
289773
289799
289064
288932
Conventional
1,8
Light-medium
289784
289799
289065
288933
Conventional
2,2
Light-medium
289068
289787
289066
288934
Conventional
2,8
heavy
289069
289800
289067
288935
288936
HVLP
HVLP
0,5
0,8
Light
Light
289041
289041
289270
289271
289061
289062
288937
HVLP
1,1
Light-medium
289041
289785
289063
288938
HVLP
1,4
Medium
289041
289799
289064
288939
HVLP
1,8
Medium-heavy
289041
289799
289065
288940
HVLP
2,2
Medium-heavy
289070
289787
289066
288941
HVLP
2,8
heavy
289043
289800
289067
288942
288943
Compliant
Compliant
0,5
0,8
Light
Light
289042
289042
289270
289271
289061
289062
288944
Compliant
1,1
Light-medium
289042
289785
289063
288945
Compliant
1,4
Medium
289042
289799
289064
288946
Compliant
1,8
Medium-heavy
289042
289799
289065
288947
Compliant
2,2
Medium-heavy
289044
289787
289066
288948
Compliant
2,8
heavy
289045
289800
289067
Needle
Nozzle
289272
Tip
(pieces)
(5x) 289350 ‡
(5x) 288183 ‡
(1x) 192304 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 288185 ‡
(1x) 192306 ‡
(5x) 288185 ‡
(1x) 192306 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 289007 ‡
(1x) 192309 ‡
(5x) 289350 ‡
(5x) 288183 ‡
(1x) 192304 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 288185 ‡
(1x) 192306‡
(5x) 288185 ‡
(1x) 192306 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 289007 ‡
(1x) 192309 ‡
(5x) 289350 ‡
(5x) 288183 ‡
(1x) 192304 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 288185 ‡
(1x) 192306 ‡
(5x) 288185 ‡
(1x) 192306 ‡
(5x) 289004 ‡
(1x) 192308 ‡
(5x) 289007 ‡
(1x) 192309 ‡
Needle/
Nozzle Kit
289458
289459
289460
289462
289464
289466
289467
289458
289459
289460
289462
289464
289466
289467
289458
289459
289460
289462
289464
289466
289467
Metal Spray Guns with SST Tip
Nozzle
(mm)
Viscosity
Conventional
1,1
Light-medium
AirCap
Kit
289773
288950
Conventional
1,4
Medium
289773
289273
288951
Conventional
1,8
Medium-heavy
289784
289273
288952
HVLP
1,1
Light-medium
289041
289272
288953
HVLP
1,4
Medium
289041
289273
288954
HVLP
1,8
Medium-heavy
289041
289273
288955
Compliant
1,1
Light-medium
289042
289272
288956
Compliant
1,4
Medium
289042
289273
288957
Compliant
1,8
Medium-heavy
289042
289273
Part
No
288949
Spray Type
06.02.2009 12:29
Tip
(pieces)
8-10
289063
Needle/
Nozzle Kit
289461
289010┼
192310┼
289064
289013┼
289463
192311┼
289065
289013┼
289465
192311┼
289063
289010┼
289461
192310┼
289064
289013┼
289463
192311┼
289065
289013┼
289465
192311┼
289063
289010┼
289461
192310┼
289064
289013┼
289463
192311┼
289065
289013┼
289465
192311┼
‡ = Material is PEEK Polyetheretherketone
┼ = SST 17-4
Manual 312 414
Automotive Applications
Nozzle
(mm)
Viscosity
Conventional
0,8
288930
Conventional
288931
Part
No
288929
Spray Type
Needle
Nozzle
Light
AirCap
Kit
289773
289271
289062
1,1
Light-medium
289773
289785
289063
Conventional
1,4
Medium
289773
289799
289064
289034
HVLP
1,0
Light
289771
289785
289774
289035
HVLP
1,2
Light-medium
289771
289799
289775
289541
289036
HVLP
Compliant
1,4
1,0
Medium
Light
289771
289772
289786
289785
289776
289777
289037
Compliant
1,2
Light-medium
289772
289799
289778
289542
Compliant
1,4
Medium
289772
289799
289779
Viscosity
Needle
Nozzle
289270
289271
288907
288927
Tip
(pieces)
(5x) 288183 ‡
(1x) 192304 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 288185 ‡
(1x) 192306 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 288185 ‡
(1x) 192306 ‡
(5x) 289001 ‡
(5x) 288184 ┼
(1x) 192305 ┼
(5x) 288185 ┼
(1x) 192306 ┼
(5x) 288185 ┼
(1x) 192306 ┼
Needle/
Nozzle Kit
289459
289460
289462
289468
289469
289495
289470
289471
289497
Wood Applications
Part
No
288958
288959
Spray Type
Nozzle
Conventional
Conventional
(mm)
0,5
0,8
Light
Light
AirCap
Kit
289773
289773
289109
Conventional
1,0
Light
289773
289785
289112
288960
288961
HVLP
HVLP
0,5
0,8
Light
Light
289771
289771
289270
289271
288907
288927
289110
HVLP
1,0
Light
289771
289785
289112
288962
288963
Compliant
Compliant
0,5
0,8
Light
Light
289772
289772
289270
289271
288907
288927
289111
Compliant
1,0
Light
289772
289785
289112
Tip
(pieces)
(5x) 289350 ‡
(5x) 288183 ‡
(1x) 192304 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 289350 ‡
(5x) 288183 ‡
(1x) 192304 ‡
(5x) 288184 ‡
(1x) 192305 ‡
(5x) 289350 ‡
(5x) 288183 ‡
(1x) 192304 ‡
(5x) 288184 ‡
(1x) 192305 ‡
Needle/
Nozzle Kit
289459
289460
289468
289469
289495
289470
289471
289497
High Wear Applications
Part
No
288973
288974
288975
288976
288977
288978
288979
288980
288981
Spray Type
Conventional
Conventional
Conventional
HVLP
HVLP
HVLP
Compliant
Compliant
Compliant
Nozzle
(mm)
1,5
1,8
2,2
1,5
1,8
2,2
1,5
1,8
2,2
06.02.2009 12:29
Viscosity
Medium
Medium-heavy
Medium-heavy
Medium
Medium-heavy
Medium-heavy
Medium
Medium-heavy
Medium-heavy
Air Cap
Kit
288861
289049
289049
289115
289325
289325
289050
289327
289327
8-11
Needle
Nozzle
Tip
Needle/Nozzle
Kit
289352†
289074
N/A
289478
289352†
289075
N/A
289479
289351†
289076
N/A
289480
289352†
289331
N/A
289481
289352†
289332
N/A
289482
289351†
289333
N/A
289483
289352†
289331
N/A
289481
289352†
289332
N/A
289482
289351†
289333
N/A
289483
┼ = SST 17-4
† = Tungsten carbide
Manual 312 414
Waterborne Applications
Part
No
288964
288965
288966
Spray Type
Conventional
Conventional
Conventional
Nozzle
(mm)
0,8
1,1
1,4
288967
288968
288969
HVLP
HVLP
HVLP
288970
288971
288972
Compliant
Compliant
Compliant
Viscosity
Light
Light-medium
Medium
Air Cap
Kit
289046
289046
289046
Needle
Nozzle
289785
289785
289799
289071
289072
289073
1,0
1,2
1,4
Light
Light-medium
Medium
289047
289047
289047
289785
289785
289799
289071
289072
289073
1,0
1,2
1,4
Light
Light-medium
Medium
289048
289048
289048
289785
289785
289799
289071
289072
289073
Air Cap
Kit
289051
289051
Needle
Nozzle
Tip
(pieces)
(5x) 288184
(1x) 192305
(5x) 288185
(1x) 192306
(5x) 288184
(1x) 192305
(5x) 288185
(1x) 192306
(5x) 288184
(1x) 192305
(5x) 288185
(1x) 192306
┼
┼
┼
┼
┼
┼
┼
┼
┼
┼
┼
┼
Needle/
Nozzle Kit
289475
289476
289477
289475
289476
289477
289475
289476
289477
Adhesive Applications
Part
No
288982
288983
Spray Type
Conventional
Conventional
Nozzle
(mm)
1,3
1,8
Viscosity
Medium
Medium-heavy
Tip
(pieces)
289799
289799
289077
289078
Needle
Nozzle
(5x) 288185 ┼
(1x) 192306 ┼
Needle/
Nozzle Kit
289484
289485
Spatter Applications
Part
No
288985
Spray Type
HVLP
Nozzle
(mm)
1,1
Viscosity
Light-medium
Air Cap Kit
Air Cap
Kit
289053
Tip
(pieces)
289785
Needle Kit
289063
(5x) 288184 ┼
(1x) 192305 ┼
┼ = SST 17-4
Nozzle Kit
Tip (needle)
253 784
5x (O-Ring & Washer)
234636
234637
234638
234639
234648
234649
234650
234694
234695
234696
Old XT-Guns
XT AIR – Sprayer 0,030
XT AIR – HVLP
0,042
XT AIR – HVLP
0,055
XT AIR – HVLP
0,070
XT AIR – Complaint 0,042
06.02.2009 12:29
Manual
310 692
8-12
Needle/
Nozzle Kit
289460
AIRPRO SPRAY GUNS Siphon Feed
Manual: 312 578
Technical data:
Air inlet
Wetted Parts:
SST, PEEK,
Acetal, UHMWPE
7 bar
7 bar
¼” npsm
3/8” npsm
0 - 43°
Repair Kit:
3/8-18.6
289 455
289 790
289 791
289 143
289 408
289 079
Special thread
Gun repair kit
Retaining Ring Kit
1/4-18.6
Special thread
Accessories:
244 130
239 802
239 803
239 804
240 266
235 117
234 784
235 119
239 655
15D684
15E470
15E 469
15T 646
15E467
0,95 Litre Pressure Cup SST
0,95 Litre Pressure Cup SST single air regulator
0,95 Litre Pressure Cup SST double air regulator
0,95 Litre Pressure Cup SST remote air regulator
PE- Liners for 0,95 Litre Siphon cup (40packs)
1,9 Litre Pressure Cup ALU with air regulator and hose
Air Control Valve with gauge (gauge 108 190)
Gun Air Regulator assembly (gauge 110 436) (regulator 110 438)
Swivel 9/16-18UNF-2A - ¼ -18.6 special thread
3M PPS Adapter 3/8”
Lid Dispenser
Liner Dispenser
Gun Tray for 6 cups
239 631
239 636
239 637
1,2m Air whip hose 2x ¼-18NPSM (061346)
4,6m Air hose
2x ¼-18NPSM (061346)
7,6m Air hose
2x ¼-18NPSM (061346)
308 791
308 791
308 791
308 791
308 791
308 791
310 692
308 791
Cups SST-0,95 Litre
234 784
244 130
239 802
06.02.2009 12:29
239 803
239 804 (0,95 Litre)
235 117 (1,9Litre)
8-13
239 655
235 119
15D 684
AIRPRO SPRAY GUNS Siphon Feed
Manual 312 578
Siphon Feed
Part No
289028
(289991)
289029
(289992)
289030
(289993)
289031
(289994)
289032
(289995)
289033
(289996)
Spray
Type
Nozzle
(mm)
Viscosity
Conventional
Conventional
HVLP
1,4
HVLP
1,8
Compliant
Compliant
1,4
1,8
1,4
1,8
AirCap
Kit
Needle
Kit
Nozzle
Kit
Needle
Nozzle Kit
Lightmedium
Lightmedium
Lightmedium
Lightmedium
Lightmedium
289769
289788
289560*
289487
Lightmedium
289768
234778 (1x) ‡
288984 (5x) ‡
289788
288308*
289488
234778 (1x) ‡
288984 (5x) ‡
289789
289417*
289489
253917 (1x) ‡
289001 (5x) ‡
289789
289418*
289490
253917 (1x) ‡
289001 (5x) ‡
289788
288304*
289491
234778 (1x)‡
288984 (5x) ‡
289788
288306*
289492
234778 (1x) ‡
288984 (5x) ‡
* = with O Ring 111457 (PTFE)
289769
289435
289435
289768
(without cup)
Air Cap Kit
Tip
(pieces)
Needle Kit
Nozzle Kit
Tip (needle)
253 784
5x (O-Ring & Washer)
Accessories:
234941
234940
234942
(box of 8)
(box of 50)
(box of 100)
234771
234772
15F531
(box of 8)
(box of 50)
(box of 100)
234937
234938
234939
(box of 4)
(box of 25)
(box of 100)
Lid and liner
Cup and collar
06.02.2009 12:29
8-14
AIRPRO SPRAY GUNS Gravity Feed
Manual: 312 579
Technical data:
Air inlet
Wetted Parts:
SST, PEEK,
Acetal, UHMWPE
7 bar
7 bar
¼” npsm
0 - 43°
Repair Kit:
289 455
289 790
289 791
289 143
289 408
289 079
289 022
Gun repair kit
Retaining Ring Kit
Gun Body repair kit
Accessories:
289 797
Cup aluminium 0,65 Litre ,
289 770
Cup plastic, 0,65 Litre
289 802
Cup aluminium 0,95 Litre,
(gasket 189 883), lid (236 908), under cup( 239727)
192 407
Cup holder
234 784
Air Control Valve with gauge, (gauge 108 190)
235 119
Gun Air Regulator assembly, (gauge 110 436) (regulator 110 438)
239 655
Swivel (AIR) 9/16-18UNF-2A - ¼ -18.6 special thread
15T623
Air Cap Test
289 795
PPS Adapter 5/8” – 11UNC
15E470
Lid Dispenser
15T 646
15E 469 Liner Dispenser
15E467
Gun Tray for 6 cups
Hose:
239 631
1,2m Air whip hose 2x ¼-18NPSM (061346)
239 636
4,6m Air hose
2x ¼-18NPSM (061346)
239 637
7,6m Air hose
2x ¼-18NPSM (061346)
AIRPRO SPRAY GUNS Gravity Feed
06.02.2009 12:29
8-15
192 407
289 795
Gravity Feed without Cup
Part
No
289002
289003
289005
289006
289008
289009
Spray Type
Conventional
Nozzle
(mm)
1,4
Conventional
HVLP
HVLP
Compliant
Compliant
1,8
1,4
1,8
1,4
1,8
Viscosity
Manual 312 579
Light-medium
Air Cap
Kit
289773
Needle
Kit
289799
Nozzle
Kit
289780
Light-medium
Light-medium
Light-medium
Light-medium
Light-medium
289773
289771
289771
289772
289772
289786
289767
289494
(5x) 289001 ‡
289786
289776
289495
289786
289801
289496
289799
289779
289497
(1x) 192306 ‡
(5x) 288185 ‡
289799
289559
289498
Gravity Feed with Plastic Cup
Part
No
289011
289012
289014
289015
289017
289018
Spray Type
Conventional
Nozzle
(mm)
1,4
Conventional
HVLP
HVLP
Compliant
Compliant
1,8
1,4
1,8
1,4
1,8
Viscosity
289021
289023
289024
289026
289027
Spray Type
Conventional
Nozzle
(mm)
1,4
Conventional
HVLP
HVLP
Compliant
Compliant
1,8
1,4
1,8
1,4
1,8
06.02.2009 12:29
Tip
(Needle)
(1x) 192306 ‡
(5x) 288185 ‡
Manual 312 579
Light-medium
Air Cap
Kit
289773
Needle
Kit
289799
Nozzle
Kit
289780
Light-medium
Light-medium
Light-medium
Light-medium
Light-medium
289773
289771
289771
289772
289772
289786
289767
289494
(5x) 289001 ‡
289786
289776
289495
289786
289801
289496
289799
289779
289497
(1x) 192306 ‡
(5x) 288185 ‡
289799
289559
289498
‡ = Material is PEEK Polyetheretherketon
Gravity Feed with 3M PPS Cup
Part
No
289020
Needle/
Nozzle
289493
Viscosity
Needle/
Nozzle
289493
Tip
(Needle)
(1x) 192306 ‡
(5x) 288185 ‡
Manual 312 579
Light-medium
Air Cap
Kit
289773
Needle
Kit
289799
Light-medium
Light-medium
Light-medium
Light-medium
Light-medium
289773
289771
289771
289772
289772
289786
289767
289494
(5x) 289001 ‡
289786
289776
289495
289786
289801
289496
289799
289779
289497
(1x) 192306 ‡
(5x) 288185 ‡
289799
289559
289498
‡ = Material is PEEK Polyetheretherketon
8-16
Nozzle
Kit
289780
Needle/
Nozzle
289493
Tip
(Needle)
(1x) 192306 ‡
(5x) 288185 ‡
RAZOR Gravity Feed Gun
RAZOR Siphon Feed Gun
Manual 312 101
Manual 312 106
Technical data:
Air inlet
Fluid inlet Siphon feed
7 bar
7 bar
¼” npsm
3/8“ npsm
0 - 43°
Repair Kit:
199196
Wetted Parts:
SST, PEEK,
Acetal, UHMWPE
253 748
253 783
253 784
253 785
253 933
253 934
289 213
Gun repair kit
Air Cap seal kit
Trigger repair kit
Air inlet fitting repair kit
Cup gasket 10 Pack kit
Gasket Ø 9,6mm
104 893
Accessories:
288 744
234 387
288 652
253 975
104 893
M70 424
244 130
M70 394
196 467
High volume air adjusting valve with gauge
High output precision air valve
Digi-tell digital air adjusting valve
PPS Adapter
O-ring Teflon
Gasket foam
Cup 1litre HVLP
Hose connector
Duckbill valve
Gasket Ø 8,9mm
M70 424
244 130
M70 394
288 744
234 387
06.02.2009 12:29
288 652
8-17
253 975
196 467
RAZOR Gravity Feed Gun
Part
No
288561
288562
288563
288564
288565
Spray Type
Application
LVLP
LVLP
LVLP
LVLP
LVLP
Nozzle
(mm)
1,2
1,3
1,4
1,5
1,6
288566
HVLP
288567
288568
288569
288570
288571
288572
288573
288574
288575
Manual 312 101
Clear, Base
Clear, Base
Clear, Base
Clear, Base
Clear, Base
Air Cap
Kit
253823
253823
253823
253823
253823
Nozzle
Kit
253802
253803
253804
253805
253806
Needle
Kit
253771
253771
253772
253772
253773
1,0
Clear, Base
253824
253792
253769
HVLP
HVLP
HVLP
HVLP
HVLP
HVLP
HVLP
HVLP
Compliant
1,2
1,3
1,4
1,5
1,7
1,5
1,8
2,3
1,0
Clear, Base
Clear, Base
Clear, Base
Clear, Base
Clear, Base
Primer
Primer
Primer
Clear, Base, Primer
253824
253824
253824
253824
253824
253828
253828
253829
253825
253793
253794
253795
253796
253797
253789
253790
253791
253816
253771
253771
253772
253772
253772
253772
253774
253774
253769
288576
288577
288578
288657
288579
288580
Compliant
Compliant
Compliant
Compliant
Compliant
Compliant
1,2
1,3
1,4
1,5
1,6
2,0
Clear, Base, Primer
Clear, Base, Primer
Clear, Base, Primer
Clear, Base, Primer
Clear, Base, Primer
Clear, Base, Primer
253825
253825
253825
253825
253825
253826
253817
253818
253819
288653
253820
253821
253771
253771
253771
253772
253772
253774
288581
288582
288583
288584
Compliant
Conventional
Conventional
Conventional
2,5
1,2
1,3
1,4
Clear, Base, Primer
Clear, Base
Clear, Base
Clear, Base
253826
288451
253451
253451
253822
288295
288296
288297
253775
253772
253772
253771
288585
288586
288587
Conventional
Conventional
Conventional
1,6
1,8
2,5
Clear, Base
Primer
Primer
253451
253452
253453
288298
288299
288300
253772
253772
253775
289218
HVLP
1,3
Metallic
289212
253794
253771
289219
289220
HVLP
HVLP
1,4
1,5
Metallic
Metallic
289212
289212
253795
253796
253772
253772
Tip
(Needle)
(5x) 288185 ┼
(1x) 192306 ┼
(1x) 253917 ┼
(5x) 288187
(1x) 192307
(5x) 288184
(1x) 192305
(5x) 288185
(1x) 192306
┼
┼
┼
┼
┼
┼
(1x) 253917 ┼
(5x) 289004
(1x) 192308
(5x) 288184
(1x) 192305
┼
┼
┼
┼
(5x) 288185 ┼
(1x) 192306 ┼
(1x) 253917 ┼
(5x) 289004
(1x) 192308
(1x) 192309
(1x) 253917
┼
┼
┼
┼
(5x) 288185 ┼
(1x) 192306 ┼
(1x) 253917 ┼
(5x) 289007
(1x) 192309
(5x) 288185
(1x) 192306
(1x) 253917
┼
┼
┼
┼
┼
┼ = SST 17-4
RAZOR Siphon Feed Gun
Part
No
288588
Spray Type
Nozzle
(mm)
2,2
Application
288589
Compliant
288590
288591
288592
288593
288594
288595
288596
288597
288598
Compliant
Compliant
Compliant
Compliant
Compliant
Conventional
Conventional
Conventional
Conventional
HVLP
Manual 312 106
Clear, Base
Air Cap
Kit
253827
Nozzle
Kit
253778
Needle
Kit
253777
1,0
Clear, Base
253454
288301
288640
1,2
1,3
1,4
1,6
1,8
1,5
1,8
2,0
2,5
Clear, Base
Clear, Base
Clear, Base
Clear, Base
Primer
Clear, Base
Clear, Base
Primer
Primer
253454
253454
253454
253454
253454
253455
253455
253456
253457
288302
288303
288304
288305
288306
288307
288308
288309
288310
288641
288641
288642
288642
288643
288642
288642
253777
253777
06.02.2009 12:29
8-18
Tip
(Needle)
(5x) 289004
(1x) 192308
(5x) 288184
(1x) 192305
┼
┼
┼
┼
(1x) 234778 ┼
(5x) 288185 ┼
(1x) 192306 ┼
(1x) 253917 ┼
(5x) 288185 ┼
(1x) 192306 ┼
(5x) 289004 ┼
(1x) 192308 ┼
┼ = SST 17-4
AIR SPRAY GUNS
Fluid inlet ¾“ for heavy application e.g. Anti Drön coatings
TexSpray 1030FC
President
Fluid 70 bar
Recommended 10 bar
Air 7 bar
Fluid 140 bar
Air 7 bar
Nozzle 5,9mm 167 330
Horn air Meter
(remove air cap)
Option:
Nozzle 9,5mm 167 331
235 490
204 000
Automatic Air Gun
234 736, for 0,8mm, 1,1mm, 1,4mm
234 737, for 1,8mm, 2,2mm
234 738, for 2,8mm
II Gc T6
II Gc T6
XT Autom.
Air Gun
Compliant
HVLP
with needle adjustable knob
XT Autom. Air Gun, housing blue
XT Autom. Compliant, housing green
XT Autom. HVLP, housing Metal / purple
Assembly block for all automatic guns
Set screw
288 221
288 217
288 218
288 223
288 160
288 211
288 091
Air cap
Orifice
0,8 – 1,8
Width Spray
Medium Spray
Small Spray
Air Spray
288 133
234 758*
234 756*
2,2* mm
234 760
2,8* mm
234 761
* Not locked in Spray position
HVLP
Compliant
288 134
N/A
N/A
234 754
234 755
288 132
N/A
N/A
N/A
N/A
Nozzle/Needle Kit (HVLP, Air Spray & Compliant)
Nozzle orifice
0,76 mm = 0,8
1,07 mm = 1,1
1,397 mm = 1,4
1,499 mm = 1,5
1,778 mm = 1,8
2,184 mm = 2,2
2,790 mm = 2,8
1,067 mm = 1,1 SST
1,397 mm = 1,4 SST
1,778 mm = 1,8 SST
Nozzle/Needle kit
15F 829
15F830
15F 831
15F 832
15F 833
15F 834
15F 835
15F 836
-
Nozzle
234 741
234 742
234 744
234 745
234 746
234 747
234 748
234 749
234 750
234 751
Material PEEK is Polyetheretherketone
06.02.2009 12:29
Needle kit
288 175
288 176
288 177
288 177
288 178
288 179
288 180
288 181
288 182
288 182
Needle peak
288 183, PEEK*
288 184, PEEK*
288 185, PEEK*
234 778, PEEK
288 187, PEEK*
234 779, PEEK
234 780, PEEK
234 781, SST
234 782, SST
234 782, SST
* Needle peak 5 pieces / packing
8-19
AIR SPRAY GUNS
Hand gun
Part No.
Description
204 000
235 490
Hand spray gun for heavy material (also filled)
Texture Hand spray gun
Manual
Air consumption 425-708 L/min
306 494
308 274
Automatic Spray Gun, HVLP and Compliant, without manifold order separately
max. working pressure 7,0 bar
Part No.
Description
Nozzle-orifice
249 369
249 370
249 371
249 372
249 375
249 376
249 377†
249 378†
249 379†
249 380†
Pressure 0,8 mm
Pressure 1,1 mm
Pressure 1,4 mm
Pressure 1,8 mm
Pressure 1,1 mm SST
Pressure 1,4 mm SST
Pressure 0,8 mm
Pressure 1,1 mm
Pressure 1,4 mm
Pressure 1,8 mm
0,76 mm
1,07 mm
1,39 mm
1,78 mm
1,07 mm
1,39 mm
0,76 mm
1,07 mm
1,39 mm
1,78 mm
Manual: 311051
Needle/
Nozzle
15F 829
15F 830
15F 831
15F 832
15F 835
15F 836
15F 829
15F 830
15F 831
15F 832
Materialviscosity
Low
Low-Medium
Medium
Medium-Heavy
Low-Medium
Medium
Low
Low-Medium
Medium
Medium-Heavy
Spray output
L/min
0,12-0,30
0,24-0,42
0,36-0,54
0,48-0,6
0,24-0,42
0,36-0,54
0,12-0,30
0,24-0,42
0,36-0,54
0,48-0,6
FAN
Width+
381 mm
406 mm
406 mm
432 mm
406 mm
406 mm
381 mm
406 mm
406 mm
432 mm
Materialviscosity
Low
Low-Medium
Medium
Medium-Heavy
Low-Medium
Medium
Low
Low-Medium
Medium
Medium-Heavy
Spray output
L/min
0,12-0,30
0,24-0,42
0,36-0,54
0,48-0,6
0,24-0,42
0,36-0,54
0,12-0,30
0,24-0,42
0,36-0,54
0,48-0,6
FAN
Width+
381 mm
406 mm
406 mm
432 mm
406 mm
406 mm
381 mm
406 mm
406 mm
432 mm
Spray output
L/min
0,12-0,30
0,24-0,42
0,36-0,54
0,48-0,6
0,24-0,42
0,36-0,54
0,12-0,30
0,24-0,42
0,36-0,54
0,48-0,6
FAN
Width+
381 mm
406 mm
406 mm
432 mm
406 mm
406 mm
381 mm
406 mm
406 mm
432 mm
HVLP Gun, max. working pressure 2,5 bar
Part No.
Description
Nozzle-orifice
249 388
249 389
249 390
249 391
249 394
249 395
249 396†
249 397†
249 398†
249 399†
Pressure 0,8 mm
Pressure 1,1 mm
Pressure 1,4 mm
Pressure 1,8 mm
Pressure 1,1 mm SST
Pressure 1,4 mm SST
Pressure 0,8 mm
Pressure 1,1 mm
Pressure 1,4 mm
Pressure 1,8 mm
0,76 mm
1,07 mm
1,39 mm
1,78 mm
1,07 mm
1,39 mm
0,76 mm
1,07 mm
1,39 mm
1,78 mm
Description
Nozzle-orifice
249 407
249 408
249 409
249 410
288 049
288 050
249 411†
249 412†
249 413†
249 414†
Pressure 0,8 mm
Pressure 1,1 mm
Pressure 1,4 mm
Pressure 1,8 mm
Pressure 1,1 mm SST
Pressure 1,4 mm SST
Pressure 0,8 mm
Pressure 1,1 mm
Pressure 1,4 mm
Pressure 1,8 mm
0,76 mm
1,07 mm
1,39 mm
1,78 mm
1,07 mm
1,39 mm
0,76 mm
1,07 mm
1,39 mm
1,78 mm
PEEK
SST
†
+
288 133
288 133
288 133
288 133
288 133
288 133
288 133
288 133
288 133
288 133
Manual: 311051
Needle/
Nozzle
15F 829
15F 830
15F 831
15F 832
15F 835
15F 836
15F 829
15F 830
15F 831
15F 832
Compliant Gun- VOC conform, working pressure 2,0 bar
Part No.
Air cap
Needle/
Nozzle
15F 829
15F 830
15F 831
15F 832
15F 835
15F 836
15F 829
15F 830
15F 831
15F 832
Materialviscosity
Low
Low-Medium
Medium
Medium-Heavy
Low-Medium
Medium
Low
Low-Medium
Medium
Medium-Heavy
Air cap
288 134
288 134
288 134
288 134
288 134
288 134
288 134
288 134
288 134
288 134
Manual: 311051
Air cap
288 132
288 132
288 132
288 132
288 132
288 132
288 132
288 132
288 132
288 132
= Standard-Material Needle peak
= Needle/Nozzle is Stainless steel
= Needle adjustment knob to adjust the needle orifice
= Measured with gun nozzle 254 mm from target
Separate needle sets
(not available as complete gun)
Needle/
NeedleNeedleNozzle
set
peak
N/A
288 177
234 778
15F 833
288 179
234 779
15F 834
288 180
234 780
N/A
288 182
N/A
Definition of the fluid viscosity:
Low: Up to 18 sec. with Zahn-cup No. 2 (20 cP)
Medium: 19 to 28 sec with Zahn-cup No. 2 (20-64 cP)
Heavy: More than 28 sec with Zahn-cup No.2
(>64cP)
Nozzle
234 745
234 747
234 748
234 751
Ø
mm
1,5
2,2
2,8
1,8 SST
Assembly block for all automatic gun
288 221: Manifold block, fluid inlet below, ¼“ NPT(A)
288 223: Manifold block, fluid inlet side, ¼“ NPT(A) whit horn air regulator valve
288 217: Manifold block, fluid inlet side, ¼“ NPT(A)
288 218: Manifold block, fluid inlet side, # 5 JIC
288 160: Manifold block, fluid inlet behind, ¼“ NPT(A)
288 211: Manifold block, fluid inlet behind, # 5 JIC
Part No.
description
manual
234 736
234 737
234 738
Horn air pressure – control kit for 0,8; 1,1 and 1,4 mm size
Horn air pressure – control kit for 2,2 mm size
Horn air pressure – control kit for 2,8 mm size
311 051
311 051
311 051
06.02.2009 12:29
8-20
AIRLESS SPRAY GUNS
Silver Airless Gun
Flex Gun
for 2K & Zinc
235 461
235 460
235 462
XTR – Airless Gun
XTR 500, XTR 504, XTR 501
XTR 700, XTR 704, XTR 506
XTR 701
New Contractor
246 240
235 464
243 283
238 591
XTR 505
XTR 507
XTR 705
XTR 502
XTR 702
SG2 / SG3 Gun
New FTX - Gun
246 468
248 157
235 465
XTR 503
XTR 703
Hydra Mastic Gun
Mastic Gun
243 011
243 238
288 425
288 475
288 477
288 438
288 428
OFS-System
288 429
206 718
207 300
224 472
224 526
Contractor
224 990
224 991
244 364
248 947
287 026
287 027
bead gun
244 163
244 164
Extension Contractor
Automatic-Gun
Inline Valve
for telescope
gun
241 161
241 162
288 048
06.02.2009 12:29
206 513
207 614
206 887
948 864
238 377
206 660
8-21
238 338
220 229
AIRLESS SPRAY GUNS
SilverGun
345bar
50°Cmax
¼” NPSM
7/8” Guard
XTR-5
345bar
71°Cmax
¼” NPSM
7/8” Guard
XTR-7
500bar
71°Cmax
¼” NPSM
7/8” Guard
Contr.
250bar
49°Cmax
¼” NPSM
7/8” Guard
Part No.
Description
Manual
235 460
235 461
235 462
243 283
246 240
235 464
238 591
235 465
246 468
248 157
241 705
XTR 500
XTR 501
XTR 502
XTR 503
XTR 504
XTR 505
XTR 506
XTR 507
XTR 700
XTR 701
XTR 702
XTR 703
XTR 704
XTR 705
288 475
288 425
288 477
244 364
Silver Gun 2,3 mm,
bare
(2 finger trigger) Rep Kit 235 474
Silver Gun 2,3 mm
bare
Silver Gun, für F-F-Nozzle, 0,94 mm bare (2 finger trigger) Rep Kit 235 475
Silver Gun, RAC 5 & 515 Tip
Silver Gun, RAC X & LTX517 Tip
(2 finger trigger)
Silver Gun, XHD RAC & XHD 617 Tip
Silver Gun, XHD RAC & XHD 619 Tip
Silver Gun 345bar bare
Flex Plus Silver Gun, connect at housing, RAC X & LTX 517 Tip
Flex Silver Gun,
connect at housing , RAC 5, LL5 319 Tip
Texture-Gun, 276 bar, with GHD-RAC & 631Tip (4 finger trigger)
Gun, round grip (25mm) without Tip
(4 finger trigger)
Gun, round grip (25mm) Tip 163 519
(4 finger trigger)
Gun, oval Nylon grip ŧ
& XHD RAC,
519 Tip (4 finger trigger)
Gun, oval Nylon grip ŧ
& XHD RAC,
Gun, round grip (25mm) & XHD RAC,
519 Tip (2 finger trigger
Gun 500 bar, round grip without Nozzle
(4 finger trigger)
Gun 500 bar, round grip & Nozzle 163 519
(4 finger trigger)
Gun 500 bar oval Nylon grip ŧ & XHD RAC, 519 Tip
(4 finger trigger)
Gun 500 bar oval Nylon grip ŧ & XHD RAC, 519 Tip
(2 finger trigger)
Gun 500 bar round grip & XHD RAC,
519 Tip
(4 finger trigger)
Gun 500 bar round grip & XHD RAC,
519 Tip
(2 finger trigger)
New Contractor Gun RAC X, Tip LTX 517, 2 Filter, (2 finger trigger) RepKit-288 488
New Contractor Gun RAC X, Tip LTX 517, 2 Filter, (4 finger trigger) RepKit-288 488
New Contractor Gun RAC 5 without Tip
(2 finger trigger) RepKit-288 488
New Contractor Gun without Tip& Guard
(inline Design) RepKit-218 070
Coating
309 092
309 092
309 092
309 092
309 740
309 092
309 092
308 237
Coating
309 741
Coating
308 491
coating
CE EXX II 2G
coating
CE EXX II 2G c T6
coating
~ ( CE EXX II 2G )
coating
CE
287032 Filter 60Mesh, 287033 Filter 100Mesh, 287034 Filer 60+100Mesh
06.02.2009 12:29
8-22
312 145
CE EXX II 2G c T6
Contractor InLine gun, 252 bar, bare, ¼″ inlet, outlet ⅞″-14 UNF-2B
coating
Contractor clean shot * 0.9 m, fluid pressure open @ 48 bar, RAC X (517)
Contractor clean shot * 1.8 m, fluid pressure open @ 48 bar, RAC X (517)
Extension 0,9 m, clean shot,
Extension 1,8 m, clean shot
SG2 Gun, (Fieldlazer) with RAC 4, tip 262 515, 248 bar
(4 finger trigger)
FTX
SG3 Gun
with RAC 5, tip 262 515, 248 bar
(4 finger trigger)
248bar
243084 Filter 50 & 100Mesh for SG2 Gun and SG3 Gun
49°Cmax
coating
CE
¼” NPSM
288 429
New FTX Gun RAC X, tip LTX 517, 60 u. 100 Mesh filter
7/8” Guard
288 438
New FTX Gun RAC X, tip LTX 517, 60 u. 100 Mesh filter
New FTX Gun RAC 5, without tip
(4 finger trigger)
288 428
206 718
Hydra Mastic Gun, ½″ inlet, outlet ⅞″–14 UNF–2B
bare
coating
207 300
Hydra Mastic Gun, ½″
bare without Diffuser
245 820
Ultra-Lite Sp. Max, ½″ inlet, ⅞″–14 outlet, bare (without tip)
Spatter
224 472
Mastic-Flo-Gun, 275bar 25cm extension
Coating
224 526
Mastic-Flo-Gun, without extension , ½“NPT(M) inlet and outlet
Coating
224 990
Mastic-Flo-Gun without Diffuser, XHD RAC, Tip XHD 535, 275 bar
Coating
224 991
Mastic-Flo-Gun without Diffuser, XHD RAC, Tip XHD 535, 275 bar
248 947
OFS –GUN RAC V 288 424, incl. clean shot valve 287030, extension 287 726 (25 cm),
OFS
tip LL5 321, LL5 419 and 262 521
(clean shot O-Ring 120190 / Gasket 162863)
220 229
Gun, 210 bar, ¼″NPT(M), Fluid inlet and outlet (inline Design)
Coating
206
513
Automatic
Gun,
210
bar,
SST,
bare
Auto
207 614
Automatic Gun, 210 bar ,SST, bare, without Diffuser
210bar
206 887
Automatic Gun, 210 bar ,SST, housing chrome plate , PTFE
Coating
49°Cmax
948 864
similar 206 887 but with air opened/closed, O-Ring Viton, packing PTFE,
¼” NPSM
air- housing SST
288 048
Automatic Gun, 280 bar, SST , Standard tip, without assembly Manifold
coating
Auto
241 161
assembly Manifold, ¼″ NPS(M) inlet
CE 280 bar
EXX II 2G c T6
241 162
assembly Manifold, JIC No. # 5 inlet
49°Cmax
238 377
Automatic Gun, 210 bar, SST, orifice 4,57mm, without diffuser, with RAC without tip
Auto
210bar
206 660
Automatic Hydra Mastic Gun 210 bar, orifice 4,57mm, with diffuser
Air1/4” NPT(F) 238 338
Automatic bead Gun with needle kit Ø 5,16 – 5,9 – 7,14 und 8,48 (mm)
Perlenausst.
Fluid3/8”NPT(F) ŧ Nylon grip, for heat isolation, Temp. 72°C
244 364
287 026
287 027
244 163
244 164
243 011
243 238
312 145
(310 743)
311 861
311 861
311 861
309 641
309 315
309 641
309 641
309 045
309 045
311 861
311 861
306 863
309 495
308 124
308 124
308 206
311 083
307 756
306 815
311 053
308 613
306 830
308 612
AIR-ASSISTED HAND & AUTOMATIC GUNS
G 15 AA
G40 AA
Gasket
No. 183 616
to 0,011” orifice
with strainer 241 804
AAM xxx
GG4 xxx
249 233
287 926
288 844
(Fine Finish tip)
(Standard AA-tip)
249 238
249 242
249 246
241 804
Filter Swivel
239 394
G40 AA
automatic
gasket
No. 183 616
to 0,011” orifice
with strainer 241 804
288 514
conversion kit
AAP xxx
(Standard AA-Precisions - tip)
288 053
288 044
288 046
G40 Conversion Kit
287 917
Plug
nut 1 ¼ “ –18 UNEF-2B (f)
(Nozzle order separately )
15G 713
Seat/Diffuser
Seat / Gasket
Housing
249 877
246 453
15F 446
15F 442
Guard/Air cap
249 478
Tip
LTX xxx
PAA xxx Serie: blue
FFA xxx Serie: green
WR12xx Serie: blue
249 140
249 598
Manifold
288 221
288 217
288 218
288 224
06.02.2009 12:29
8-23
288 160
288 211
AIR-ASSISTED HAND & AUTOMATIC GUNS
105bar
¼“npsm Fluid
¼“npsm Air
43°C max
280bar
¼“npsm Fluid
¼“npsm Air
43°C max
280bar
¼“npsm Fluid
¼“npsm Air
49°C max
Part No.
249 233
288 844
287 926
Description
G15 AA Gun, 105 bar with SST ball and acetal seat, needle kit 288 558
G15 AA Gun, 105 bar with SST ball and acetal seat, needle kit 288 558
G15 AA Gun, 105 bar with SST ball and seat, needle kit 288 559
AAM xxx
GG4 xxx
241 804
224 453
238 563
249 598
15F 446
first digit angle in degree and than the last two digits orifice in inc (e.g. AAM 417)
Fine Finish AA tip
(odd), (e.g. AAM 417)
Standard AA tip
(odd), (e.g. GG4 423)
Nozzle filter kit (10 pieces) 150 Mesh for Alpha AA Nozzle, 0,007″-0,011″
Gun inlet strainer- 5 pieces (205 264 Tech), 100 Mesh
Gun inlet strainer- 3 pieces (205 265 Tech), 60 Mesh
Nozzle cleaning kit 12 pieces Ø 0,14 mm
Universal gun tool
249 242
249 238†
249 246
239 394
G 40 AA Hand Gun, 280 bar, standard nozzle (AAM or GG4) , Needle kit 288 559
G 40 AA Hand Gun, 280 bar, with RAC-X and FFT tip, Needle kit 288 559
G 40 AA Hand Gun, 280 bar, Hi-Flow, standard nozzle (AAM or GG4), Needle kit 288 559
Filter swievel
288 514
249 135
249 140
249 456
Conversion Kit, RAC to Flat Tip - Air Cap
Valve fan assembly , (Horn air regulator kit)
HVLP, verification, , (Horn air control kit)
carbide (3/32″) needle kit, gasket and nut for Model G40,
can also be used by G15 (not standard)
287 917
249 478
15F 442
249 877
15G 713
AAM xxx
GG4 xxx
LTX xxx
G40 conversion kit, for G40 hand and automatic Gun, incl. Air cap, housing, seat/gasket,
seat/diffuser, not be used for G15, 105 bar
Guard, RAC Alpha / G40, (O-ring 109213)
Housing
Seat/diffuser, incl. O-rings
Plug (by using the conversion kit the Horn air regulator valve is not longer in use)
Fine finish AA tip
Standard AA tip
Conversion tip AA
246 453
248 936
RAC X seals & gasket kit, 5 pieces
RAC X seals & gasket (orange) solvent resistant (seat 15A 981, gasket 15E 557)
288 046
288 044
288 053
AA-G40 Automatic, 280 bar, standard tip AAP, carbide ball and seat Ø 1,6 mm
AA-G40 Automatic, 280 bar, standard tip AAP, SST ball, acetal seat Ø 1,6 mm
311 052
AA-Automatic, 280 bar, with AA-RACX and tip FFT or LTX, carbide ball and seat Ø 1,6 mm
AAP xxx
LTX-xxx
Standard AA tip for automatic G40 gun, other nozzle are GG4-xxx, GG5-xxx and AAM series
Nozzle, also FFT-xxx and WR12 xx, for guard RAC X
288 221
288 217
288 218
288 224
288 160
288 211
Manifold for AA-Automatic-Gun, ¼″ NPS(M) inlet, bottom
Manifold for AA-Automatic-Gun, ¼″ NPS(M) inlet, side
Manifold for AA-Automatic-Gun, JIC No. #5 inlet ,side
Manifold for AA-Automatic-Gun, ¼″ NPS(M) inlet , Horn air regulator valve
Manifold for AA-Automatic-Gun, ¼″ NPS(M) inlet backside
Manifold for AA-Automatic-Gun, JIC No. #5 (½“ –20UNF)
Note:
- When using AA reserving nozzle the spraying patter is not so fine as with AA standard nozzles.
- Guns contain no horn air regulating valve, if required order separately.
06.02.2009 12:29
8-24
Manual
311 001
311 001
311001
313 214
311 001
311 001
311 001
311 052
EXTRUSION GUNS
240 199
207 945
235 627
237 607, 237 649
235 628, 243 775
204 355
965 786
965 766
243 666
243 482
965 768
965 767
C27 xxx
Automatic valve
basic model (without tip)
C27 020
½“ NPS(A)
inlet
918 512
C27 151
Tip-Seal automatic valve (with nozzle)
C27 148
C27 031
2-stage
trigger
Snuffer automatic valve (includes tip)
Tip-Seal
C27 130
C27 132
C27 134
C27 078
948 065
Balanced piston
(light trigger)
C27 067
288 554
Hand gun with balanced
piston for light trigger
06.02.2009 12:29
8-25
241 161
241 162
244 930
EXTRUSION GUNS
Part No.
Description
204 355
240 199
235 627
948 065
Extrusion-Flo-Gun, 210 bar
Ultra Lite In-line, 234 bar with carbide seat, valve needle ball, inlet ¼″ NPT(F)
Extrusions gun Ultra Lite 4000, valve needle cone,
¼″ inlet and outlet ¾″-16UNF-2B, outlet Ø 5,15 mm
Extrusions gun Ultra Lite 4000, valve needle cone Wolfram carbide, ¼″ inlet
Ultra Lite 4000, valve needle, cone Wolfram carbide, ¼″(M), inlet 37° swivel
Ultra Lite 6000, valve needle ball, ½″ inlet, ¼″ outlet NPT(M), Ø4,77 mm
Ultra Lite 6000, valve needle cone, ½″ inlet ,¼″ outlet NPT(M),
Gun, valve needle ball, ½″ inlet, outlet ⅛″ and ¼″ outlet Ø6,35 mm
Extrusions gun, valve needle ball, max 172 bar, Ø 7,5 mm, inlet ½″
outlet ¼″ NPT(M) resp. flange
Extrusions gun, 2-step trigger, needle ball, max 172 bar, Ø 7,5 mm,
inlet ½″ NPT(M), outlet ¼″ NPT(M) resp. flange
Extrusions gun, balance piston, max 172 bar, Ø 10,7 mm, inlet ½″,
outlet ¼″ NPT(M) resp. flange
Extrusions gun, Tip-Seal , max 172 bar, inlet ½″ NPT(M),
outlet Ø 2,39 mm
Extrusionlanze, ¾″ Eingang
238 338
Automatic Gun, pressure bead Gun with needle kit Ø 5,16; 5,9; 7,14 and 8,48
965 768
965 767
965 786
965 766
243 482
Ultra Lite 1 K Hand Gun, Aluminium with electric switch, 276 bar Snuffer
Ultra Lite 1 K Hand Gun, Aluminium, 276 bar Snuffer
Ultra Lite 1K Automatic, Aluminium, 276 bar Snuffer
Ultra Lite 1K Automatic, SST, 276 Bar Snuffer
Ultra Lite 1K Automatic, SST , PrecisionSwirl orbitor, outlet 45°
Ultra Lite 1K Automatic, SST, PrecisionFlo, outlet straight, ¼″ NPT(M) o ¾″–16
237 607
237 649
235 628
243 775
207 945
C27 020
C27 031
C27 067
C27 078
243 666
288 554
241 161
241 162
244 930
C27 130
C27 134
C27 132
C27 148
308 253
Extrusion
307 004
Extrusion
309 739
Extrusion
307 905
308 612
308 612
Extrusion
308 876
Automatic valve, air opened, spring closed, 165 bar
EP O-ring, without tip, ¼″ fluid inlet
Automatic valve, (snuffer type), outlet 6,35 mm, 165 bar,
Air opened/closed, EP O-ring, ¼″ fluid inlet
Automatic valve, (snuffer type), outlet 6,35 mm, 165 bar
Air opened/closed, Viton O-ring, ¼″ fluid inlet
Automatic valve, (snuffer type), outlet 3 mm, 165 bar
spring closed, Viton O-ring, ¼″ fluid inlet
Automatic valve Tip-Seal ®, air opened , spring closed EPR O-Ring, EPDM O-Ring and PTFEseals, ¼“ fluid inlet, outlet Ø 4,75 mm
Automatic valve, snuffer type, pneumatic opened /closed, ⅛″ NPT(F) outlet
06.02.2009 12:29
8-26
306 586
308 807
Extrusion
AL-Automatic for Sealer, Sealer-Nozzle 182 xxx, 270 xxx, C08 xxx
Manifold, with ¼″ NPS (M) inlet
Manifold , with JIC Nr.#5 inlet
Manifold, with ⅛″ NPT (M) connection for warm water
C27 151
918 512
manual
Extrusion
Extrusion
311 053
310 547
310 538
5x seal / gasket
RAC V - 243 281
RAC X - 246 453
RAC X - 248 936 (solvent)
XHD - XHD010
GUN ACCESSORIES
Flat Tip
RAC TIP
RAC IV – yellow gasket 111 025, 224 082 (20x)
RAC IV – black gasket 108 962, 222 155 (20x)
RAC IV – gasket & seat 221 176 (5x)
not
included
220 255
220 251
220 249
220 247
243 161 RAC V, 246 215 RAC X, XHD001
243 263 RAC V, 246 437 RAC X,
243 470 RAC V, 246 770 RAC X,
10,3 mm
Tube
206 496
Special Nipple
181 085
181 084
6 778 610
164 120
7/8“ (M) – 11/16“ (F)
7/8“ (M) – 3/4“ (F)
7/8“ (M) – M18x1 (F)
7/8“ (F) – 11/16 (A)
Extension Kit
Gasket
RAC V 115 524
RAC X 15A 978
781 mm
Wrench
171 147
Gasket
15H 622
(5x 258 017)
7/8“(M)
RAC V
243 295
243 296
243 297
243 298
Air Atomizer Kit
(without gun)
RAC X
287 019
287 020
287 021
287 022
only tube
246 294
246 295
246 296
---
(25cm)
(38cm)
(50cm)
(75cm)
Brush
101 891
101 892
244 052 with hose
244 223
CleanShot™
Directional
Spray Nozzle
287 030
(244 162 repair kit)
Dual swivel Head
Nozzle180°
206 236
206 235
Gasket
15H 622
246 297
Adapter / Fitting
224 410
224 399
187 177
244 825
167 738
224 398
198 316 SST
Manifold
208 433
208 432
208 864 (SST)
Thread:
3x ¼“ 18NPSM (M)
Thread:
2x ¼“ 18NPSM (M)
1x ¼“ 18NPSM (F)
168 680
Ø 16,26 mm
inside 1/8“ NPT
outside ¾“ 16UNF 2A
1/8“ NPT (F)
168 683
Ø 13,44 mm
Ø13,48mm
188 253
inside 1/4“ NPT
outside ¾“ 16UNF 2A
06.02.2009 12:29
8-27
Ø13,89mm
GUN ACCESSORIES
Part No.
243 161
243 263
243 470
243 281
246 215
246 437
246 770
246 453
248 936
XHD 001
XHD 010
176 161
176 167
Description
RAC V, ⅞″(F) Guard, 280bar,
for tips 262 xxx, LL5 xxx und TMX xxx
RAC V, 11/16″(F) Guard, 280bar,
RAC V, M18x1(F) (Böllhoff),
RAC V, seat and gasket kit 5 pieces
(gasket 115 524)
RAC X, ⅞″(F), 280 bar,
for PRO PAA-, FFA- and WR-12xx (blue cap)
RAC X, 11/16″(F), 280 bar,
for PRO PAA-, FFA- and WR-12xx (blue cap)
RAC X, M18 x 1(F), (Böllhoff),
RAC X, seat and gasket kit, 5 pieces,
(seat 15A 981), (gasket 15A 978)
RAC X, seat and gasket kit, 5 pieces,
(orange)–solvent resistant (seat 15A981 / gasket 15E557)
XHD RAC-, ⅞″-14 UNF-2B, Guard, 500 bar,
XHD, seat and gasket kit, 5 pieces,
(seat & gasket can not ordered separately )
Seal, GHD-RAC (old)
Gasket, GHD-RAC (old)
manual
309 055
309 640
309 640
310 791
307 991
307 991
171 601
171 602
220 255
220 251
220 249
220 247
166 969
162 863
Nut retainer 11/16″, without guard,
Nut retainer ⅞″, without guard,
Guard 11/16″ 16 UNF-2B,
350 bar, for 163/269 standard tips,
Guard ⅞″-14 UNF-2B,
350 bar, for 163/269 standard tips,
Guard 11/16″ 16 UNF-2B,
250 bar, for FF163 tips,
Guard ⅞″-14 UNF-2B,
250 bar, for FF163 tips,
RAC gasket, thinly 1,6 mm
25 pieces Part no. 223 373
RAC gasket, thick, 3,2 mm
25 pieces Part no. 223 374
101 891
101 892
Brush, nylon, Ø 9 mm
Brush, nylon, Ø 15,9 mm
287 030
Clean shot off valve/head, RAC X, ⅞″-14 UNF-2B, tip 517, fluid pressure opened by ca. 48 bar
Gasket 15H622 , O-ring 107 505
Nozzle ⅞″(F) x ⅞″(M), 180 °
Directional spray nozzle, ⅞″(F) x 11/16″(M), without tip,
with strainer 0,23 mm ≈ 60 Mesh
Dual swivel heat, ⅞″(M) x 11/16″(F),
without tip,
with strainer 0,23 mm ≈ 60 Mesh
309 642
308 987
181 085
181 084
6778610
164 120
Nut retaining ⅞″(F) for connecting an extrusion tip 161 505 ⅛″ NPT(M) to a airless gun with
bushing nozzle 168 683 ⅛″ NPT(FI)
Adapter, ⅞″(M) x 11/16″(F) montage RAC to competition like Wagner, Aro, Binks 43, Rexon
Adapter, ⅞″(M) x ¾″ 20 UNEF-2B (F), for Binks
Adapter, ⅞″(M) x M18 x 1 (F) , for Altlas Copco, Iwata, Kopperschmidt / Böllhoff
Adapter, 7/8”(F) x 11/16” (M), Wagner extension to Graco Gun
167 738
187 177
198 316
218 932
224 398
224 399
224 410
244 825
Adapter ⅞″(F) x
Adapter ⅞″(M) x
Adapter ⅞″(F) x
Adapter ⅞″(F) x
Adapter ⅞″(F) x
Adapter ⅞″(F) x
Adapter ⅞″(M) x
Adapter ⅞″(F) x
306 715
168 683
188 253
168 680
Sealer bushing nozzle, (zinc plated)
Nut retainer ¾″-16 UNF-2B, Ultra-Lite gun 4000/6000
Nut retainer ¾″-16 UNF-2B, extrusion gun (207945)
243 295
243 296
243 297
243 298
287 019
287 020
287 021
287 022
246 294
246 295
246 296
Extension 25 cm, RAC V ,without tip, incl. gasket 162 863 & O-Ring 114 049, max 279 bar,
Extension 25 cm, RAC X without tip, incl. gasket 162 863 & O-Ring 114 049, max 279 bar,
Extension 25 cm, incl. gasket 162 863 & O-Ring 114 049, max 500 bar,
246 297
206 235
206 236
615 767
6711 181
098 017
208 433
208 432
239 864
244 052
244 223
206 496
incl. gasket 166 969
308 236
⅜″NPT(M)
½″-20 UNF–2B(M)
⅛″NPT(F) SST, 1.4005,
¼″NPT(M) 45°,
⅛″ NPT(F),
⅞″(M) 45°,
¼″NPT(F) max 350 bar,
¼″NPT(M)
without
with
with
with
with
with
Air Atomizer (for Texture-Gun 241 705) with ⅜″, 15 m air hose, tip 116 190 ø 2,8 mm 65°
Air Atomizer (for Texture-Gun 241 705)
without air hose, tip 116 190 ø 2,8 mm 65°
Tube, 780 mm, spin nozzle 10,3 mm used for e.g. wax
8-28
309 853
306 788
gasket
gasket
gasket
gasket
gasket
gasket and o-ring und O-Ring
Tip cleaning kit (12 pieces), size 10
Tip cleaning kit (12 pieces), size 12
Adapter for refitting for circulation system, 1 x ¼″ NPS(F), 2 x ¼″ NPS(M),
Adapter for refitting for circulation system, 1 x ¼″ NPS(M), 2 x ¼″ NPS(M),
Adapter for refitting for circulation system, 1 x ¼″ NPS(M), 2 x ¼″ NPS(M), SST
06.02.2009 12:29
308 236
308 987
308 253
307 004
309 523
308 692
308 694
309 272
GUN ACCESSORIES – FLUID NOZZLES – BRUSHES
C17 009
C08 179
C17 008
161 505
C32 003
C08 088
164 799
9,5mm
C00 XXX
C01 025
C00 096
C04 113
12,7mm
C04 140
C04 135
C04 132
C04 128
C04 137
C00 051
C00 048
C04 116
C05 008
C00 031
C521 041
C00 047
C00 051
C00 048
C02 052
0,06
Applicator, 1.4401 SST with
hard metal - Nozzle inlays
model 234 513 to 234 524
C00 079
C02 050
C51 172
512 135
C02 051
197 471
C00 042
C00 049
C00 043
C00 050
C00 044
06.02.2009 12:29
8-29
GUN ACCESSORIES – FLUID NOZZLES – BRUSHES
Part No.
C17 008
C17 009
C08 179
Nozzle, 38 mm long, ⅛″NPT(M), orifice 1,2 mm
Nozzle, 31 mm long, ⅛″NPT(M), orifice 3,2 mm
Nozzle, 43,9 mm long, ¼″NPT(M), orifice 4,0 mm
161 505
C32 003
C08 088
Nozzle, 50,8 mm long, ⅛″NPT(M), orifice 2,4 mm
Nozzle, 76 mm long, ¼″NPT(M), orifice 3,2 mm
Nozzle, 58,4 mm long, ¼″NPT(M), orifice 4,0 mm
164 799
Nozzle, 54 mm
C00 xxx
C00 051
C00 048
C00 044
C00 046
C00 047
C00 080
C02 050
C02 051
C04 113
C00 044
Nozzle, 50,8 mm long, for connection to extrusion gun, Ultra-Lite
Ø 0,8 mm C00 014, Ø 1,2 mm C00 013, Ø 1,6 mm C00 010, Ø 2,4 mm C00 007, Ø 3,2 mm C00 006
Ø 4,0 mm C00 012, Ø 4,4 mm C00 009, Ø 4,8 mm C00 005, Ø 6,3 mm C00 008, Ø 9,5 mm C00 011
Outlet tip, 87,3 mm long, 30° bend, orifice Ø 3,2
Outlet tip, 61,0 mm long, 30° bend, orifice Ø 0,8
Outlet tip, 63,5 mm long, orifice Ø 1,6 mm
Note:
Outlet tip with flange or ¼″ NPT(M)
thread fit to Ultra Lite Guns
Outlet tip, 89,0 mm long, Orifice Ø 1,52 mm
Outlet tip, 140 mm long, Orifice 1,6 mm
Outlet tip, 140 mm long, 15° bend, orifice Ø 1,6 m m
Outlet tip, 89,0 mm long, 30° bend, orifice Ø 1,6 m m
Outlet tip, 63,5 mm long, Orifice Ø3,2 mm Special
C00 096
Outlet tip, 78 mm long, orifice Ø3,2 mm
C01 025
Outlet tip, 62 mm long, ⅛″NPT(M) orifice 2,4 x 9,5 mm
C04 140
C04 135
C04 132
C04 128
C04 137
C04 116
512 135
Outlet tip, plastic, ¼″ NPT(M), 66 mm long, orifice 1,6 mm
Outlet tip, plastic, ¼″ NPT(M), 102 mm long, orifice 1,5 x 12,7 mm wide
Outlet tip, plastic, ¼″ NPT(M), 63,5 mm long, orifice 1,6 mm
C51 172
Outlet tip, Polyethylene, ¼″ NPT(F), 76,2 mm long for high viscosity Urethane
C00 028
C00 029
C05 009
C02 052
C00 030
C05 008
521 041
C00 033
C00 031
C00 079
C00 042
C00 049
C00 043
C00 050
197 471
234 513
234 514
234 515
234 516
234 517
234 518
234 519
234 520
234 521
234 522
234 523
234 524
Brush, ⅜″-24 UNF-2B(F), horse hair 22 mm long, 16 mm wide, wide 38 mm
Brush, ⅜″-24 UNF-2B(F), horse hair 54 mm long, 35 mm wide, wide 82,5 mm
Brush, ⅜″-24 UNF-2B(F), nylon hair 22 mm long, 16 mm wide, wide 45 mm
Brush, ⅜″-24 UNF-2B(F), nylon hair 22 mm long, 28,5 mm wide, wide 54 mm
Brush, ⅛″ NPT(F) horse hair 22 mm long, 16 mm wide, wide 45 mm
Brush, ⅛″ NPT(F) horse hair 22 mm long, 16 mm wide, wide 45 mm, without nozzle
Brush, ⅛″ NPT(F) Nylon hair 22 mm long, 16 mm wide, wide 45 mm
Brush, ⅛″ NPT(F) SST wire 22 mm long, 19 mm wide, wide 59 mm
Outlet tube ¼″ I.D. 30° bend, 102 mm long, outlet thread ⅜″-24(M) for brush
Outlet tube 8,1 mm I.D. straight 153 mm long, connection thread ⅛″ NPT(M)
Applicator with 13 holes, orifice Ø 0,64 mm, 51 mm wide (M), Clean kit 234 525
Description
manual
long, ⅛″NPT(M), orifice 1,4 mm
06.02.2009 12:29
8-30
406 583
PAINT ROLLERS AND EXTENSIONS
Geospere − Roller is fixed with screws for all applications
240 005
Roller 23 cm
Roller 23 cm
107 590
fixed with screw
Telescope extension
(with 244825)
218 775 0,45 m – 0,90 m
218 776 0,90 m – 1,80 m
218 777 1,80 m – 3,60 m
Frame work roller, complete 098 085
incl. gun
(244 364)
incl. telescope
(218 775)
incl. geosperse
(218 935)
incl. cover
(107 590)
Room roller, complete
incl. gun
incl. telescope
incl. geosperse
incl. cover
098 084
(244 364)
(218 776)
(218 935)
(107 590)
Paint roller , complete
incl. gun
incl. telescope
incl. geosperse
incl. cover
6880 095
(244 364)
(232 121)
(240 005)
(107 590)
Swivel
224 399 (45º)
240 010
Adapter
244 825
Contractor
inline gun
244 364
Cover 0,30m 6880 095
Extension for cover or spray
Gasket 162 863 and O-ring 114 049 are incl.
232 121 25 cm
232 122 50 cm
232 123 100 cm
232 124 150 cm
232 125 200 cm
Roller complete 0,45- 0,90m 098 085
Roller complete 0,90- 1,80m 098 084
Frame & Diffuser, 23cm wide, 1/8“ NPT(A)
Model 218 935 included:
Cover
Pos.
1
1a
1b
1c
2
3
4
5
107 589, 107 590
107 591, 107 592
098 205, 098 206
Part N° Description
218 943 Kit Replacement
275 643 End cap inside
275 645 End cap outside
275 673 Diffuser segment
108 808 U-Packing
183 420 Nut retaining
218 582 Frame
101 983 Screw
Qty:
1
1
1
8
1
1
1
1
1a
Screw
180 577
1c
Kit Replace.
1b
5
3
Model 240 005 included parts above and:
192 637
192 638
162 863
114 049
Nut retaining 7/8“-14UNF (I)
Fitting 1/8“ NPT (I)
Gasket
O-Ring
1
2
Screw 108 290
fixed with Loctite
244 825
162 863
114 049
4
Spray extension
Rack X
287 019
287 020
287 021
287 022
pipe
108 163
Spacer not single available
108 164 O-Ring
Not single
available
06.02.2009 12:29
8-31
Geospere − Roller is fixed with screws for all applications
098 084
098 085
6880 095
107 589
107 590
107 591
107 592
098 205
098 206
108 402
186 944
186 945
186 946
PAINT ROLLER TELESCOPIC
Power Roller, 90cm to 180cm, Paint roller 098 206, 20 mm, Contractor inline gun 244 364
Power Roller, 45cm to 90cm, Paint roller 098 206, 20 mm, Contractor inline gun 244 364
PAINT ROLLER – FIXED EXTENSION
Paint roller , 25cm extension, Contractor inline gun, Paint roller 098 205
PAINT ROLLER
Paint roller, 23 cm wide, 9,5 mm, Synthetic-Flor
Paint roller, 23 cm wide, 12 mm, Synthetic-Flor
Paint roller, 23 cm wide, 14 mm, Flor, padded
Paint roller 8 cm wide 12 mm Synthetic-Flor
240 054
240 005
218 935
224 268
Paint roller-Frame and diffuser 8 cm wide, ⅞″ –14 UNF(I) only diffuser 220 233, U-cup 108 808
Paint roller-Frame and diffuser 23 cm wide, ⅞″–14 UNF(I) only diffuser 218-943 U-cup 108 808
Paint roller-Frame and diffuser, 23 cm, ⅛″ NPT(A),only diffuser 218 943 U-cup 108 808,for
telescope
Paint roller-Frame, similar 218 935 but 30 cm wide
232 121
232 122
232 123
232 124
232 125
240 010
244 825
114 049
162 863
224 399
224 410
244 364
extension 25 cm, for spray or rolling, inlet ⅞″ – 14 UNF(F), out. ⅞″–14 UNF(F)
extension 50 cm, for spray or rolling
max 248 bar
Drehgelenknippel ⅞″(A) x ⅞″(I) Zum verbinden von zwei Verlängerungen max Länge 7,20 m
Adapter ⅞″ – 14(I) x ¼″ NPT(A), incl. Dichtung 162 863 u. O-ring 114 049
O-Ring between roller and fix-extension
Gasket between roller 240 005 and fix-extension
45° swivel ⅞″(F) x ⅞″(M)
Adapter ⅞″ – 14 (M) x ¼″NPT(F) to fix extension to gun 220 229
Contactor I-Line gun ¼″ inlet, outlet ⅞″ – 14 UNF – 2b
TELESCOPIC EXTENSION max 21 bar
Telescope extension 45-90 cm, incl. 244 825, inlet ⅞″ – 14 UNF(F), outlet ⅛″ NPT(F)
SPRAY EXTENSION max 279 bar
Spray extension 25 cm with RAC X, without tip
218 775
218 776
218 777
287 019
287 020
287 021
287 022
06.02.2009 12:29
8-32
manual
309 321
307 755
308 830
307 755
308 824
308 824
308 824
308 824
308 824
308 824
309 321
307 713
309 237
309 321
309 321
307 713
Cover with quick change clamp
107 590
244 623
107 590
Paint roller with
Diffuser
& frame
244 623
Paint roller
111 612
10mm X 23cm
115 524
107 589, 107 590
107 591, 098 205
Telescope 218 775
Contractor
In-Line Gun
244 364
162 863
114 049
244 825
244 281
(complete)
224 399
swivel 45°
224 399
244 279 (complete straight)
244 512 (complete 45°)
240 010
245 397
(complete with gun)
224 399
Swivel 7/8” (M & F)
Airless Gun
Extension for rolling or spraying
Gasket 162 863 and O-ring 114 049 are incl.
232 121 25 cm
232 122 50 cm
232 123 100 cm
232 124 150 cm
232 125 200 cm
Paint roller
Pos. Part-No
1
2
245 999
3
15B 065
4
246 277
5
197 106
– 23cm
Description
Frame
End cap
Diffuser
Inlet cap
clamp
Qty.
1
1
2
1
1
Extension RacX
Screw 108 290
fix with Loctite
244 825 incl. Gasket
162 863
114 049
Extension
218 775 0,45m – 0,90m
218 776 0,90m – 1,80m
218 777 1,80m – 3,60m
pipe
Not single
available
06.02.2009 12:29
108 163
Gasket
Spacer not single available
108 164 O-Ring
8-33
287 019
287 020
287 021
287 022
COVER AND EXTENSION
Cover with Quick Connect clamp
Part No.
107 589
107 590
107 591
107 592
098 205
098 206
Description
Paint pressure roller TELESCOPIC
Scaffold roller 45 to 90 cm, for paint roller 107 590, 12 mm without gun
Paint roller fixed extension
Paint roller with 50 cm extension , Contractor Inline (244364) gun, paint roller 107 590
Paint roller with 50 cm extension, ⅞″(F) , for connecting to airless gun, without gun,
Paint roller with 50 cm extension, ⅞″(F), 45° swivel, for connecting to airless gun, wit hout gun,
Paint Roller +
Paint roller, 23 cm wide, 9,5 mm, Synthetic-Flor
244 623
244 271
Paint roller incl. Frame, Diffuser and paint roller (107 590) 23 cm, ⅛″ NPT(A), for telescope 232xxx
Paint roller similar 244 623 but with tread ⅞″−14 UNF(M)
232 121
232 122
232 123
232 124
232 125
240 010
244 825
114 049
162 863
224 399
224 410
244 364
Extension 25 cm, to spray or roll, inlet ⅞″ – 14 UNF(F), outlet ⅞″–14 UNF(M)
Swivel ⅞″(M) x ⅞″(F) for connecting of two extensions max. length 7,20 m
Adapter ⅞″ – 14(F) x ¼″ NPT(M), incl. gasket162 863 and O-Ring 114 049
O-Ring between roller and fix extension
Gasket between roller 240 005 and fix extension
45° swivel ⅞″(F) x ⅞″(M)
Adapter ⅞″ – 14 (M) x ¼″NPT(F) to install extension to gun 220 229
Contactor Inline gun ¼″ Eing., outlet ⅞″ – 14 UNF – 2b
244 281
245 397
244 279
244 512
manual
309 445
309 323
309 319
309 321
309 322
308 824
308 824
308 824
308 824
308 824
308 824
309 321
307 713
309 237
TELESCOPE max. 21 bar
218 775
218 776
218 777
Telescope 45- 90cm, incl.244 825, inlet ⅞″ – 14 UNF(F), outlet ⅛″ NPT(F)
Telescope 90-180cm, incl.244 825, inlet ⅞″ – 14 UNF(F), outlet ⅛″ NPT(F)
Telescope 180-360cm, incl.244 825, inlet ⅞″ – 14 UNF(F), outlet ⅛″ NPT(F)
287 019
287 020
287 021
287 022
Spraying extension 25 cm with RAC X, without tip
SPRAYING EXTENSION max 279 bar
06.02.2009 12:29
8-34
309 321
309 321
307 713
PNEUMATIC SEALANT GUN
C27 098
Part No.
C27 098
Description
Gun with handle for Standard 285 gr/310 cm³ cartouche and 3 m air hose
Manual
309 162
Gun with handle
Retainer
C04 090
C04 090
Gun without handle
70g
C04 077
170g
340g
C04 091
C04 069
C04 087
C04 076
C04 090
C04 068
C04 087
C04 077
C04 091
C04 069
C04 093
C04 079
Gun with handle for 70 gr. polyethylene cartouche
Gun, Palm Grip without handle for 170 gr. polyethylene cartouche
Retainer 70 gr.
Retainer 170 gr.
Retainer 340 gr.
Gun Body (Palm Grip)
Handle
Handle
C04 079
06.02.2009 12:29
Gun body
C04 093
8-35
309 968
FLUID FILTERS AND ACCESSORIES
Supporter (PE)
188 420
Supporter
186 075 (PE)
179 801 (CS)
74mm
236 495 2x30Mesh
236 496 2x60Mesh
236 497 2x100Mesh
236 498 2x200Mesh
144mm
Red-Alert
224 458 2x30Mesh
224 459 2x60Mesh
224 468 2x100Mesh
224 469 2x200Mesh
214 570 (Alu)
218 029 (CS)
223 160 (SST)
238 782 (SST)
240 183 (SST)
238 620
237 069
214 724
238 623
214 726
Bag Filter
238 630
Gasket
521 691
915 515 Model 6
915 516 Model 6
915 517 Model 12
915 518 Model 12
916 367 Model 12 (sanitary)
Strainer basket, SST,
Perforated
521 227
521 229
521 231
521 233
3,57 mm orifice.
521 268, model 6
521 276, model 12
Nylon bag order separately
Strainer basket, SST
integrated strainer
Mod.6 Mod.12
521 271,
521 272,
521 273,
916 100
521 279, 75 micron
521 280, 100 micron
521 281, 150 micron
Red Alert Filter
214 002
102 929
214 001
104 435
05/08/08
108 106, 108 110
108 111, 108 114
108 116, 108 119
244 053
9-1
915 700
C58 997
Part No.
236 495
236 496
236 497
236 498
Description
Filter inlet, 590 micron (30 mesh), 2 pieces
Filter inlet, 250 micron (60 mesh), 2 pieces,
Manual
223 160
238 782
240 183
218 029
214 570
224 458
224 459
224 468
224 469
186 075
Filter, SST, 350 bar, strainer 60 Mesh, 116 cm² filter area, ⅜″ inlet, ¼″ outlet,
Ø 6,45
Filter, SST, 350 bar, strainer 30 Mesh, 116 cm² filter area ⅜″ inlet, ⅜“ outlet 2 x, Ø 6,45
Filter, SST, 350 bar, strainer 60 Mesh, 116 cm² filter area ½″ inlet, ½″ outlet 4 x, Ø 6,45
Filter, CS, 350 bar, strainer 60 Mesh, 116 cm² filter area, ⅜″ inlet, ¼″ outlet,
Ø 6,45
Filter, Alu, 210 bar, strainer 60 Mesh, 116 cm² filter area, ⅜″ inlet, ¼″ outlet,
Ø 6,45
(238 436 = 25 pieces)
(238 438 = 25 pieces)
(238 440 = 25 pieces)
(238 442 = 25 pieces)
Standard support PE, option support metal 179 801 (CS zinc plated)
238 623
214 726
238 620
237 069
214 724
238 630
915 515
915 516
High pressure surge tank and filter 350 bar, round block 60 mesh
High pressure surge tank and filter 350 bar, square block
Filter ¾″ with manifold, 350 bar, round block 60 mesh
Filter ¾″ with manifold, 510 bar, round block 60 mesh
Filter ¾″ with manifold, 350 bar, square block, cover assembly, 60 mesh
Clamp for holding the surge tank (without locking screw)
Standard filter, max 21 bar for circulation systems, model 6, in - out 1-1/4“npt(f)
SST filter,
max 21 bar for circulation systems, model 6, in - out 1-1/4“npt(f)
(238 444= 25 pieces)
(238 446= 25 pieces)
(238 448= 25 pieces)
(238 450= 25 pieces)
307 273
307 273
307 296
307 296
307 296
both model with filter bag 5 to 300 micron, volume 1,6 L, (Gasket 521 691)
915 517
915 518
Standard filter , max 21 bar for circulation systems, model 12, in-out 1-1/2“npt(f)
SST filter ,
max 21 bar for circulation systems, model 12, in-out 1-1/2“npt(f)
915 700
Fluid filter, SST, 35 bar, for gun dispensing, without strainer, ⅜″ NPT(f) inlet and outlet
strainer 25 micron 521 898, strainer 75 micron 521 900, strainer 125 micron 521 902
strainer 50 micron 521 899, strainer 100 micron 521 901, strainer 150 micron 521 903
strainer 250 micron 515 345, seal = O-ring Viton, PTFE covered 521 897
Fluid filter, SST, 21 bar, in- outlet ¾″ NPT(f) 60 mesh, for other strainer please look in manual
Filter (incl. strainer 515 222) mastic, 420 bar, 1½″ (f) (ca19 Kg), (repl. o-ring wet cup) 116 586
Strainer 590 micron (30 mesh)
Strainer 420 micron (40mesh)
Strainer (Stab Point) perforated orifice 1,02 mm
Strainer (Stab Point) perforated orifice 1,5 - 1,65 mm
311 775
Both model with filter bag 5 to 300 micron, volume 1,6 L, (Gasket 521 691)
EU 193
916 367
SST filter 1½″, max 21 bar for circulation systems , model 12, 1-1/2“ sanitary
521 227
Nylon bag single layer, 10 micron, for model 6,
521 255 for model 12,
521 257 for model 12,
521 229
521 259 for model 12,
521 231
521 261 for model 12,
521 233
521 691
O-Ring Viton, PTFE covered for bag filter 915 515/915 518
916 100
TF 200 vibrations filter set, fit to filter housing model 12
308 046
214 001
307 282
″Red-Alert″ Filter, Alu, ¾“, 21bar, 22 L/min, 230cm², filter area, without strainer, drain¼″ NPT(I)
104 435
″Red-Alert″ Filter, Alu, ¾″, 210bar, 38 L/min, 230cm², filter area, without strainer, drain ¾″-16 UNF
307 252
″Red-Alert″ Filter, Alu, 1¼″, 21bar, 76 L/min, 1450cm², filter area, without strainer, drain ¾″ NPT(I) 307 283
214 002
″Red-Alert″ Filter, Alu, 1¼″, 210bar, 76 L/min, 1450cm², filter area, without strainer, drain¾″-16UNF 306 987
102 929
For filter “Red-Alert “ 214 001
108 106
Filter strainer, 30 mesh
108 107
108 108
108 109
108 110
For filter “Red-Alert” 214 002 and 102 929
108 111
108 112
108 113
108 115
108 114
Only for filter 102 929
108 119
1,0mm square orifice 108 120
1,3mm square orifice
For filter „Red-Alert” 104 435
108 116
108 117
108 118
244 053
C58 997
515 222
515 221
515 220
515 219
516 715
515 224
05/08/2008 15:56
9-2
308 918
⅜“ NPS
243 084
239 394
210 500
218 131
218 133
6711 221
220 609
220 610 179 731
179 732
6711 220
191 386
287 032
287 033
287 034
164 120
220 254
210 624
205 264
205 265
164 075
246 291
210 729
213 068
101 891
101 892
210 731
210 732
210 733
210 726
207 241
Ø 44,45 mm
240 418
156 967
157 332
156 939
180 199
110 877
101 078
110 878
205 306
111 911
114 361
Ø 50,5 mm
236 792
111 884
112 032
13 mm I.D.
243 102
187 119
165 447
112 724
206 300
181 163
181 164
243 080
243 081
243 226
218 798
183 770
181 072
181 073
189 920
237 675
235 004
237 840
196 773
244 071
244 067
244 068
244 069
05/08/2008 15:56
196 786
233 952
233 946
9-3
117 439
117 309
246 385
115 965
109 534
Part No.
218 131
218 133
6711 221
243 084
179 731
179 732
6711 220
220 609
220 610
287 032
287 033
287 034
220 254
210 624
164 120
205 264
205 265
164 075
210 500
239 394
246 291
240 418
Manual
309 091
309 237
307 614
309 045
309 097
307 614
110 877
101 078
110 878
210 726
207 241
238 769
206 300
Name
Filter kit, standard, 50 mesh strainer (blue)
249 197 = qty 25 for contractor gun
Filter kit, standard, 100 mesh strainer (orange), 249 198 = qty 25 for contractor gun
Filter kit, with 200 mesh strainer (blue)
Filter kit, with
1x 50 mesh strainer (blue) and 1x 100 mesh strainer (orange)
Filter strainer, 50 mesh, 250 micron,
224 455 = qty 2
224 456 = qty 2
Filter strainer, Black Max, pack of 2 50 mesh (Latex) blue
Filter strainer, Black Max, pack of 2 100 mesh (paint) orange
Filter strainer, 60 mesh, black, 249 199 = qty 25 for Contractor II, XTR 7 and FTX II gun
Filter strainer, 100 mesh, blue, 249 200 = qty 25 for Contractor II, XTR 7 and FTX II gun
Filter strainer with 1x 60 mesh and 1x 100 mesh for Contractor II, XTR 7 and FTX II gun
Inline filter kit, 60-100 mesh, Sp. filter
Inline filter kit, but without protective cap
Edge filter housing (I) ⅞″– 14 UNF – 2B x (A) 11/16″– UN – 2A
Edge filter, 0.13 mm, for 210 500, 210 624 and 220 254 238 561=qty 3, 224 453=qty 5
Edge filter, 0.23 mm, for 210 500, 210 624 and 220 254 238 563=qty 3, 224 454=qty 5
Edge filter head, individual, nylon
Hose filter, 424 bar, filter insert, standard 205 264
Hose filter/swivel, 400 bar, incl. edge filter 205264, ¼″NPS(A) x ¼″NPS(I)
Hose filter/swivel, 510 bar, incl. filter 205264, ¼″NPS(A) x ½″ UNEF
Filter, ⅜″NPT(I) 103 bar standard strainer, 60 mesh qty 3 = 238 431, qty 25 = 238 432
40 mesh qty 3 = 238 433, qty 25 = 238 434, 100 mesh qty 3 = 238 429
Y filter, ½″ NPT(I), 28 bar standard, 20 mesh strainer no. 110 906
Y filter, ¾″ NPT(I), 35 bar standard, 20 mesh standard no. 180 199, seal strainer plug 187 758
Y filter, 1″ NPT(I), 28 bar standard, 20 mesh strainer no. 110 907
Suction filter reuse, drum tube Ø to maximum 3.3 cm
Suction filter reuse, drum tube Ø to maximum 2.13 cm ½″
Kit (qty 25) filter bag for 210 726, 60 mesh, 250 micron, nylon bag wide 114, high 203
Suction filter (plastic), Hydra-Clean
115 965
109 534
218 798
181 073
183 770
246 385
181 072
189 920
237 675
235 004
237 840
187 119
Suction strainer, ⅜″ NPT(I) 1680 micron (12 mesh) 304 SST/nylon
Suction strainer, ⅜″ NPT(I) 841 micron (20 mesh) 304 SST/nylon
Suction strainer ½″,
16 mesh, Triton 308, PT 2500, 304 SST
Suction strainer, ½″ NPT(I) 16 mesh, EM380/480, Ultra 500, 304 SST/nylon
Suction strainer, ¾″,
16 mesh, 495 ST mobile, Line–Lazer 3000, 3500, Ultra 500, 304 SST/nylon
Suction strainer ⅞″–14UNF(I), (12 mesh) 304 SST/nylon 395/495 ST, max, ideal suction depth
Suction strainer, 1″ NPS(I), 16 mesh, U-Max 795/1095/1595/u.1000/1500, EM-5000, 304 SST
Suction strainer, 1″ NPT(I)
8 mesh, Mark V, GM-7000, 304 SST/nylon
Suction strainer, ½″ NPT(I) 12 mesh, GM-3000, 304 SST/nylon
Suction strainer, ¾″-16UNF, 12 mesh, 290 Easy, 395 ST, 495 ST, 304 SST/nylon
Suction strainer, 1 ¼″ NPT(I), 8 mesh, 2380 micron, GM-10000
Suction strainer, 1 ½” NPT(I), (Stab Point), perforates orifice 9.4 mm, steel, filter Ø 127 mm
309 304
306 817
308 229
308 854
236 792
112 724
233 952
233 946
117 439
117 309
205 306
307 821
309 639
310 743
307 248
306 815
306 815
306 655
Suction filter, Texspray Mark V, 12 mesh contains thumb screw 100 220
308 263
Suction filter, suction tube Ø 27 mm (order separate clamping screw 100 220), 10 mesh
308 415
Suction filter with strainer 1.0 mm, I.D. Ø 22 mm – I.D. Ø 28 mm = Mod. 77647 020004
Suction filter with strainer 1.8 mm, I.D. Ø 22 mm – I.D. Ø 28 mm = Mod. 77647 020005
309 463
Strainer, 1.0 mm mesh for 233 952 and 77647 020004
Strainer, 1.8 mm mesh for 233 946 and 77647 020005
Suction filter (submersible pump), standard 100 mesh standard no. 162 362, 149 micron
306 706
50 mesh strainer no. 162 746, 297 micron
165 447
Suction filter, 1″ NPS(I), Hydra Clean
306 845
181 163
Filter housing, nylon, fits in nylon hose 13 mm ID (Husky 307)
308 822
181 164
Inlet filter strainer, nylon, fits on 181 163
210 729
Hose filter, 210 bar, 60 mesh with 0.9 m whip end hose
307 245
213 068
Hose filter, 210 bar, 60 mesh without whip end hose (only fits safety flex hose)
210 731
Filter strainer, kit 3, 60 mesh – 210 732 set of 3, 100 mesh – 210 733 set of 3, 200 mesh
191 386
Gun filter housing, bare, possibly edge filter 205 264, ⅜“NPS(I) x ⅜“NPS(A)
111 911
Tank/filter, ⅜″ NPT(I) nylon, 841 micron (20 mesh) strainer tank seal 193 133
308 821
112 035
EDPM, orange, 193 133, polyethylene white
111 884
Filter strainer, 841 micron (112 032 = 149 micron) for 111 911
114 361
Filter, 52 mm high, ⅜″ NPT(I) nylon, 177 micron (80 mesh) seal 193 132, polyethylene
308 821
101 891
Cleaning brush, Ø 9 mm
101 892 Cleaning brush, Ø 15.9 mm
Filter strainer ST PRO, approx. 114 mm long
Filter strainer UltraMax Smart, approx. 180 mm long
243 080
244 071
Strainer 60 mesh, 250 micron, (black)
Strainer 30 mesh, 590 micron, (grey)
243 081
244 067
Strainer 100 mesh, 149 micron, (blue)
Strainer 60 mesh, 250 micron, (black)
243 226
244 068
Strainer 200 mesh, 74 micron, (red)
Strainer 100 mesh, 149 micron, (blue)
244 069
Strainer 200 mesh, 74 micron, (red)
196 773
Filter insert ST PRO
196 786
Filter insert, diffusion
243 102
Filter insert kit, 190ES with 60 mesh strainer (243 080)
05/08/2008 15:56
9-4
PULSATION DAMPERS
empty pipe
empty pipe
with piston
(only HydraClean)
207 278
205 123
214 725
209 011
214 623
with diaphragm
balg
233 736
218 509
220 157
224 892
224 893
224 894
224 895
239 091
239 088
238 986
238 987
238 988
239 095
239 096
218 742
239 126
05/08/2008 15:56
239 080
239 081
9-5
PULSATION DAMPERS
Part No.
Name
224 892
224 894
224 893
224 895
233 736
220 157
218 509
238 986
238 987
238 988
207 278
205 123
209 011
Pulsation damper ¾″ for Husky 716, aluminium,
PTFE diaphragm
Pulsation damper ¾″ for Husky 716, stainless steel (SST),
PTFE diaphragm
Pulsation damper ¾″ for Husky 716, aluminium,
Buna-N diaphragm
Pulsation damper ¾″ for Husky 716, stainless steel (SST),
Buna-N diaphragm
Pulsation damper, SST, 25 bar, ¾″ BSP(I), air inlet pressure to 8 bar, ¼″ BSP(I), PTFE
Pulsation damper, SST, 1 ¼″ NPT(I) inlet and outlet, UHMWPE diaphragm, 42 bar
Pulsation damper, 2″ NPT(I) x 2″ NPT(I), UHMWPE diaphragm, 42 bar
Pulsation damper, SST, 21 bar, 2″
NPT(I) inlet and outlet,
PTFE diaphragm
Pulsation damper, SST, 21 bar, 2″
Tri-Clamp Sanitary,
PTFE diaphragm
Pulsation damper, SST, 21 bar, 1.5″
Tri-Clamp Sanitary
PTFE diaphragm
Pulsation damper, air activated, 4-14 bar, DB 103 bar (Hydra-Clean), ½″ inlet, ⅜″ outlet.
Pulsation damper, ½″ NPT(A), maximum 35 bar, A.D. Ø 82.55, high incl. retainer 519.1 mm
Pulsation damper, ½″ NPT(A), maximum 21 bar, SST
Manual
214 725
214 623
218 742
HD surge tank 350 bar, rectangular block
HD surge tank 350 bar, round block
Stand for damper 220 157, 218 509, 238 983, 238 984 and 238 985
Pulsation damper for Husky diaphragm pumps 8.4 bar
¾″ automatic model, coupled with pump air
¾″ automatic model, coupled with pump air
Upper and lower housing polypropylene
239 096 with Buna-N bladder
(0°-79°C)
239 121 with PTFE bladder
(4°-79°C)
239 122 with Viton bladder
(0°-79°C)
(0°-79°C)
(4°-79°C)
308 178
307 707
307 707
307 707
306 933
306 487
307 136
307 296
307 296
307 707
308 703
Lower casing stainless steel, upper housing polypropylene
(0°-79°C)
(4°-79°C)
(0°-79°C)
Upper and lower housing stainless steel
(-12°-82°C)
239 123 with PTFE bladders (4°-104°C)
(-23°-170°C)
2” manual can be set via air pressure regulator
Upper and lower housing acetal
(0°-79°C)
(0°-79°C)
(4°-79°C)
¾” manual can be set via air pressure regulator
Lower casing stainless steel, upper housing polypropylene
(0°-79°C)
(4°-79°C)
(0°-79°C)
(0°-79°C)
(0°-79°C)
Upper and lower housing stainless steel
(-12°-82°C)
(4°-104°C)
(-23°-176°C)
Upper and lower housing acetal
(0°-79°C)
Part No.
Husky leakage detector
239 080
239 081
Polypropylene housing,
Acetal housing
05/08/2008 15:56
308 702
PVC wetted parts,
Stainless steel wetted parts
9-6
4.1 bar
4.1 bar
308 702
308 702
FLUID REGULATORS AND ACCESSORIES
203 831
204 500
205 425
204 501
206 200
209 030
830 352
244 375
214 895
214 706
243 414
214 980
217 314
221 118
830 351
236 081
236 449
236 216
236 450
241 976
236 281
205 122
236 770
237 503
244 486
235 287
244 531
236 854
206 019
235 282
208 997
916 154
289 208
Note: Regulators to 70 bar, max. viscosity 1000 CPS,
except model 204 500 and 206 200 max. 500 CPS
Assembly
connectors
167 001
156 953
192 661
222 200
Note:
222 121
206 819
222 405
238 926
Valve 222 200 max. 500 CPS
Regulator 222 121 to 238 926 max. 500 CPS
244 734
Note:
206 661
217 576
903 958
238 893
238 894
Regulator 238 889 to 244 734 max. 150000 CPS
961 635
246 687
C58 318
244 740
246 642
903 958 to C58 318 max. 1,000,000 CPS
244 740 to 246 643 max. 1,000,000 CPS
30/12/08
238 890
238 889
238 892
238 891
10 – 1
243 700
246 643
FLUID REGULATORS AND ACCESSORIES
Part No.
203 831
204 500
205 425
204 501
206 200
209 030
214 895
214 706
243 414
214 980
Name
ND fluid regulator, alu, max. working pressure 18 bar, regulated pressure range 0 – 4 bar, Ø 3 mm
ND fluid regulator, alu, max. working pressure 18 bar, regulated pressure range 0 – 1 bar, Ø 1.32 mm
ND fluid regulator, alu, max. working pressure 18 bar, regulated pressure range 0 – 4 bar, Ø 4.57 mm
ND fluid regulator, alu, max. working pressure 18 bar, regulated pressure range 1.4 – 11 bar, Ø 3 mm
ND fluid regulator, alu, pneumatically controlled, regulated pressure range 0 – 2 bar,
Ø 1.32 mm
NP fluid regulator, SST, max. working pressure 18 bar, regulated pressure range 0.3 – 7 bar, Ø 4.57 mm
ND fluid regulator, stainless steel, 0.3 – 7 bar, without accessories, maximum working pressure 18 bar
ND fluid regulator, SST, 0.3 – 7 bar, pressure gauge and tube stainless steel
3/8”
Manual
306 563
306 563
306 563
306 563
306 813
307 134
3/8”
307 212
Same as 214-706 but ⅜“ R thread, fluid housing PTFE polymer coated
ND fluid regulator, SST, 0.2 – 2 bar, pneum. regulated pressure range (2 bar),
chrome-plated pressure gauge/tube
fluid regulator, SST, 1.5 – 11 bar, pressure gauge and tube stainless steel
fluid regulator, SST, 1.5 – 11 bar, without riser and pressure gauge
fluid regulator, SST, 0.3 – 7 bar, pneumatically regulated, without pressure gauge
Acetal fluid regulator, 7 bar, regulated pressure range 0.2 – 2.1 bar, without pressure gauge
Acetal fluid regulator, 7 bar, regulated pressure range 0.2 – 2.1 bar, with pressure gauge
Acetal fluid regulator, 7 bar, regulated pressure range 1.4 – 7 bar, without pressure gauge
Acetal fluid regulator, 7 bar, regulated pressure range 1.4 – 7 bar, with pressure gauge
Acetal fluid regulator, 7 bar, regulated pressure range 0.2 – 2.1 bar, with pressure gauge 0 – 4.1 bar
Acetal pneumatically regulated, 7 bar, regulated pressure range 0.21 – 7 bar, with pressure gauge
217 314
221 118
244 375
236 081
236 449
236 216
236 450
241 976
236 281
235 287
224 531
236 854
830 351
830 352
830 353
235 282
223 883
205 122
236 770
237 503
237 448
206 019
208 997
916 154
224 486
223 824
206 661
(red cap)
217 576
222 121
238 889
238 890
238 891
238 892
238 893
238 894
244 734
ND
ND
ND
ND
ND
ND
1/4”
ND
ND
ND
ND acetal/Delrin, pneumatically controlled, max. air and fluid 1 – 7 bar,
ND acetal/Delrin, pneumatically controlled, max. air and fluid 1 – 7 bar, for Pro 4600
1/4”
ND acetal/Delrin, pneumatically controlled, max. air and fluid 1 – 7 bar, for Pro 5500
ND stainless steel, pneum. controlled, 18 bar, regulated pressure range 0.3 – 7 bar, with dump valve.
ND, stainless steel, pneum. controlled, 18 bar, regulated pressure range 0.3 – 7 bar, without dump valve.
ND, stainless steel, pneum. controlled, 18 bar, regulated pressure range 0.3 – 7 bar
Fluid pressure regulator, stainless steel, 1 ½” NPT(I) (HF pumps) regulated pressure range 0 – 18 bar
Fluid pressure regulator, stainless steel, 2” sanitary connection
Backpressure regulator, ⅜″,
21 bar operating range 0.3 – 12.4 bar,
gauge 0 – 21 bar
Backpressure regulator, ⅜“, SST, 21 bar regulated pressure range 0.3 – 12 bar
Backpressure regulator, ½″NPT(I),SST,21 bar control range 0.3–12 bar,bare without gauge,tube&adapter
Accessory set to convert from 236 770 & 237 503 to pneumatic control
Backpressure regulator, HV 1″,
21 bar control range 0 – 12 bar,
gauge 0 – 21 bar
Backpressure regulator, SST, 1¼″,
21 bar control range 0.35 – 14 bar,
gauge 0 – 14 bar
Backpressure regulator, 1¼″, SST, 21 bar hard metal valve, contr. range 0.3 – 14 bar, gauge 0 – 14 bar
Backpressure regulator, stainless steel, 21 bar, 1 ½”NPT(I) (HF pumps), control range 0.3-14 bar
Backpressure regulator, stainless steel, 21 bar, 2” Sanitary Clamp, control range 0.3-14 bar
HD fluid regulator, 210 bar spring yellow, when spring 501 511 is fitted = blue 14 – 70 bar
Regulated pressure range, 135 – 210 bar
501 510 = red 70 – 135 bar
HP regulator, 14 –70 bar
HP regulator, ¼” maximum working pressure 105 bar, SST, regulated pressure range 10.5 – 84 bar
HP fluid regulator, stainless steel 414 bar, regulated pressure range 34 – 207 bar with flushing plug
HP fluid regulator, stainless steel 414 bar, regulated pressure range 34 – 207 bar with gauge
HP fluid regulator, stainless steel 414 bar, regulated pressure range 207 – 345 bar with flushing plug
3/8”
HP fluid regulator, stainless steel 414 bar, regulated pressure range 207 – 345 bar with gauge
HP fluid regulator, stainless steel, regulated pressure range 34 – 276 bar with flushing plug
HP fluid regulator, stainless steel, pneumatic, regulated pressure range 34 – 276 bar with gauge
HD pressure regulator same as 238 893 but ½″ NPT(I) inlet and outlet, and opening for pressure sensor
½“
206 819
(white cap)
222 405
238 926
222 200
903 958
HP, backpressure regulator, 210 bar spring yellow when spring 501 511 is fitted = blue 14 – 70 bar
Operating range 135–210 bar (old version blue)
Spring 501 510 = red 70 – 135 bar
HP backpressure regulator, 210 bar, regulated pressure range 10-70 bar, ¼“ inlet and outlet
HD backpressure regulator, SST, 210 bar, ¼” inlet and outlet NPT
HP backpressure valve, SST, 10-350 bar, 3/8”NPT(I) inlet and outlet
Mastic regulator ¾″ NPT(I), regulated pressure range 70-130 bar, spring green, if spring 521 079 is installed, blue =
regulated pressure range 28-70 bar, inlet pressure should be 42 bar higher than the working pressure
Mastic regulator ¾″ NPT(I), pneumatically controlled, regulated pressure range 14 – 310 bar,
Inlet pressure should be 42 bar higher than the working pressure. Includes: ¼″ air regulator
Mastic regulator ¾″NPT(I), same as 961 635 but regulated pressure range 7 – 310 bar
Mastic regulator ¾″ NPT(I), same as 961 635 but in SST
Mastic regulator ¾″ NPT(I) same as 961 635 but with openings for sensor connection, without air regulator
Mastic regulator ¾″ NPT(I), 240 V heats max 202°C, regulated pressure range 17 – 241 bar
Fluid regulator 3/8“ NPT(I) 230V heats max 204°C, regulated pressure range 14 – 210 bar
Mastic regulator ¾″ NPT(I), pneumatically controlled, fluid side also spring-loaded, regulated control range 7–310
bar, openings to connect sensor, air inlet 90° quic k-connect
Mastic controller ¾″ NPT(I), pneumatically controlled, fluid side plus spring loaded, regulated control range 7 – 241,
240 Volt heated
Assembly connector ¼″ NPT(A) x 7/16″-20NF-2, separate 100 322 lock washer,150 513 nut
Assembly connector ¼″ NPT(A) x ⅜″-16NC-2 separate 100-639 lock washer,100 307 nut
Assembly connector, stainless steel, ¼”NPT(A) x ⅜”-16NC-2 (for filter, regulator)
961 635
246 687
C58 318
244 740
243 700
289 208
246 642
246 643
167 001
156 953
192 661
30/12/08
10 – 2
308 325
308 098
308 292
308 093
306 640
308 401
308 401
308 401
306 770
307 107
310 537
308 115
308 115
306 878
306 878
307 886
308 647
(305 793)
306 860
306 860
306 860
307 892
307 517
307 517
307 517
307 517
307 517
307 517
312 396
307 517
307 517
306 878
306 878
307 273
FLUID PRESSURE REGULATORS
BSP / NPT wetted sections in stainless steel
Note: Assembly standing compressed air connection on top or top setscrew
233 774
233 757
233 773
233 809
233 758
233 950
233 759
233 814
233 767
233 768
233 813
233 760
233 769
233 770
233 811
Pump connection
1010
1011
1012
Diaphragm pump
001.085-DP
1002
1001
1009
1013
P 50-VM – P 50-RM
1002
1014
1009
1006
1013
1004
1007
1008
Piston pump
Merkur
2K unit Ecomix
1004
233 810
Accessories mechanical regulators (spring) BSP(G) thread
Pos.
Part No.
Name
1001
77254 008003
Ball nipple, removable G ⅜″ A, SST
1002
77214 017003
Angle, swivel, 8-G ⅜″, SST
1003
77240 005002
Nipple, removable R ⅜″ keg. – G ⅜″, SST
1004
74188 015090
Seal A 17 x 21, SST
1006
76639 016003
Connector red. 6-G ⅜″ – G ¼, SST
1007
76640 005001
Connector 8-G ⅜″, SST
1008
75214 011001
Angle R ⅜″ keg.- G ¼″, SST
1009
77796 064003
Tube cpl. PN 100, SST
1010
75782 003001
Gauge G ¼-U, 0-4 bar, CuZn
1011
75782 006001
1012
75782 007001
1013
77654 002001
Angle cpl.
1014
75782 010001
1015
77796 063002
1016
75782 012001
1017
75782 013001
1018
75782 014001
1019
74188 012090
Seal A 14 x 18, SST
1020
76641 017001
Connector G ⅜″ A – G ¼, SST
Pressure regulator, e.g.
1003
1015
30/12/08
233 771
79637 007086
Model key
P 100-VM – P 100-RM
P 200-VM – P 200-RM
P 270-VM
1004
79637 012041
79637 012046
79637 012048
79635 060083
79635 003081
233 812
P 10-VM – P 10-RM
P 20-VM – P 20-RM
79635 011036
79635 004026
79635 010031
1019
1016
1017
1018
1020
P20
R
=
=
M
=
DN13
=
10 – 3
P20 – R M DN13
Max. operating range
20bar
Use
V – Downstream regulator
R – Upstream regulator
Control P – pneumatic
M – mechanical (spring)
Valve seat opening 13mm
FLUID PRESSURE REGULATORS – BSP / NPT wetted sections in stainless steel
Maximum
working
pressure
Regulated Seat Flow
pressure
Ø 10W – oil
range bar mm litres/min
Ref No.
BSP
NPT
Model
Style
233-774
234273
79635 021004 −
233-757
234-263
233-759
234-267
233-814
234-260
233-767
234-264
233-768
234-265
233-773
234-272
233-809
234-256
233-813
234-259
233-760
234-266
233-769
234-270
233-770
234-271
P10 – VM
P10 – VM – OEM
P20 – VM
P50 – VM
P100 – VM
P200 – VM
P270 – VM
P10 – VP
P10 – VP, OEM
P200 – VP
P60 – VP DN7
P150 – VP DN7
P320 – VP DN7
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Pneum
Pneum
Pneum
Pneum
Pneum
Pneum
⅜″
⅜″
⅜″
⅜″
⅜″
⅜″
⅜″
⅜″
⅜″
⅜″
¾″
¾″
¾″
40 bar
40 bar
40 bar
70 bar
180 bar
360 bar
360 bar
40 bar
40 bar
360 bar
360 bar
360 bar
360 bar
1 – 10
1 – 10
1 – 20
10 – 50
40 – 100
90 – 200
90 – 270
0.4 – 10
0.4 – 10
40 – 250
5 – 60
20 – 150
40 – 320
Spring
Spring
Spring
Spring
Spring
Spring
Pneum
⅜″
⅜″
1″
⅜″
⅜″
⅜″
⅜″
10 bar
20 bar
20 bar
50 bar
170 bar
235 bar
10 bar
1 – 10
1 – 20
2 – 20
5 – 50
40 – 100
90 – 200
1 – 10
Pump
5
5
5
5
Manual
26.6
26.6
26.6
37.2
30.8
31.2
35.0
26.6
26.6
40.3
42.9
44.5
46.7
309-474
6000365E
309-474
309-474
309-475
309-475
309-475
309-474
309-474
309-475
309-475
309-475
309-475
17.5
21.7
29.6
43.7
38.8
49.8
17.5
309-474
309-474
309-474
309-474
309-475
309-475
309-474
Backpressure regulator
233-758
233-950
233-811
233-812
233-771
233-772
233-810
234-262
234-261
234-255
234-258
234-268
234-269
234-257
P10 – RM
P20 – RM DN1
P20 –RM DN13
P50 – RM
P100 – RM
P200 – RM
P10 – RP
6.5
6.5
13.0
6.5
3.5
3.5
6.5
Fluid pressure regulator with riser tube, gauge and union connector – BSP thread
79635 004026
233-774 incl. pos. 1009, 1011, 1001, 1002, 1006, 1007, 1004, 1020 and 1019
P10 – VM
79635 010031
233-757 incl. pos. 1009, 1011, 1001, 1006, 1007, 1004, 1020 and 1019
P20 – VM
79635 011036
233-759 incl. pos. 1009, 1014, 1003, 1004, 1006, 1020 and 1019
P50 – VM
79637 012041
233-814 incl. pos. 1015, 1016, 1003, 1004, 1020 and 1019
P100 – VM
79637 012046
233-767 incl. pos. 1015, 1017, 1003, 1004, 1020 and 1019
P200 – VM
79637 012048
233-768 incl. pos. 1015, 1018, 1003, 1004, 1020 and 1019
P270 – VM
79635 060083
233-773 incl. pos. 1000, 1001, 1002, 1004, 1005, 1019, 1020 and 1031
P4 – VM
79635 003081
233-773 incl. pos. 1000, 1001, 1002, 1004, 1005, 1019, 1020 and 1022
P10 – VM
79637 007086
233-813 incl. pos. 1003, 1004, 1015, 1017, 1020, 1019, 1029 and 1028
P200 – VM
OEM = special, valve seat PEEK, ball silicon nitride
Pneumatic regulator accessories – BSP(G) thread
Ref .
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1022
1023
1024
1026
1027
1028
1029
1030
1031
1032
1036
Ref No.
76639 013001
77254 008003
77214 017003
77240 005002
74188 015090
76640 009001
76639 016003
76640 005001
75214 011001
77796 064003
75782 003001
75782 006001
75782 007001
77654 002001
75782 010001
77796 063002
75782 012001
75782 013001
75782 014001
74188 012090
76641 017001
77631 014002
75214 006002
77601 005002
75201 001010
70346 057004
75239 001003
75631 004001
75781 002001
75631 002002
75781 001001
76639 014001
30/12/08
Name
Nipple reduction 7-G ⅜″ – G ¼″ , STT
Ball nipple, removable ⅜″ (A), SST
Bracket, can swivel 8 – G ⅜″, SST
Nipple, removable R 3/8 tap – G ⅜″, SST
Seal A17 x 21, SST
Connector 9 – G ⅜″, SST
Nipple reduction 6 – G ⅜″ – G ¼″, SST
Connector 8 – G ⅜″, SST
Bracket R ⅜″ tap – G ¼″, SST
Gauge G ¼″-U, 0-4 bar CuZn
Bracket cpl.
Seal A 14 x 18, SST
Bracket G ⅜″ A – G ¼″, SST
Air pressure regulator cpl. G ¼″, 0.5-8 bar
Bracket R ¼″ tap – M 14 x1
Ball valve cpl. PN 15, G ¼″ – R ¼″
Connector – G. R ¼″ – 8
Hose 8 – 6, per m PUR
Nipple, removable R ¼″ tap – R ¼″ tap CuZn
Air pressure regulator G ¼″, 0-10 bar
Gauge G ⅛″-R, 0-16 bar
Air pressure regulator G ¼″, 0.1-3.5 bar
Gauge G ⅛″-R, 0-6 bar
Nipple reduction 6 – G ¼″ A- M 14 x 1
10 – 4
6000366E
6000366E
6000366E
6000369E
6000369E
6000369E
6000367E
6000367E
6000368E
GUN MOUNTED FITTINGS
PRESSURE REGULATORS AND ACCESSORIES
Stainless steel colour
controller for gun
assembly and quick
connections
223 628
(order separately)
223 617
223 618
223 619
XXX-XX2
220 102
Part No.
223-627
208-085
223-628
223-621
208-082
223-622
223-623
223-624
208-250
223-625
223-626
210-097
223-617
223-618
223-619
223-620
220-102
Name
Bayonet connection nipple
Ring connection nipple
Bayonet connection nipple
Gun regulator (bayonet)
Gun regulator (ring quick disconnect)
Gun regulator (screw connection)
Gun regulator (bayonet)
Twist lock
Ring quick disconnect
Bayonet coupling stainless steel
Bayonet twin connection
Bayonet twin connection
“Y” restrictor valve, ¼” NPS(A) inlet and outlet, bayonet coupling
“Y” restrictor valve, ⅜” NPS(A) inlet and outlet, bayonet coupling
“Y” restrictor valve, ¼” NPS(A) inlet and outlet, ⅜” NPS(I) screw seal
“Y” restrictor valve, ⅜” NPS(A) inlet and outlet, ⅜” NPS(I) screw seal
Restrictor valve adjusting key
30/12/08
10 – 5
Manual
307 016
307 016
307 016
307 016
307 016
307 016
307 016
307 016
307 016
307 016
307 016
307 016
307 751
307 751
307 751
307 751
AIR PRESSURE GAUGES
Part No.
110 444
104 655
110 436°
111 598
Input
NPT
⅛″
⅛″
⅛″
⅛″
Material
fitting
MS
MS
MS
MS
Display
range
0 – 1.1 bar
0 – 4.2 bar
0 – 7.0 bar
0 – 11 bar
Ring/housing
Ø
Mounting
Steel,
Steel,
Steel,
Steel,
black
black
black
black
50.8
38.1
50.8
38.1
down
down
down
down
102 730
108 190°
113 911
⅛″
⅛″
⅛″
MS
MS
MS
0 – 1.1 bar
0 – 7.0 bar
0 – 11 bar
Steel, black
Steel, black
Steel, black
50.8
38.1
38.1
Rear
Rear
Rear
185 350°
¼″
MS
0 – 15 PSI
Steel, black
89.0
down
100 960
101 180°
C36 260
101 689
112 123
¼″
¼″
¼″
¼″
¼″
MS
MS
MS
MS
MS
0 – 14 bar
0 – 14 bar
0 – 11 bar
0 – 14 bar
0 – 14 bar
Steel, black
Chromed
Steel, black
Chromed
Steel, black
50.8
50.8
50.8
50.8
50.8
down
down
Rear
Rear
Rear
Steel, black
63.0
Rear
AIR PRESSURE GAUGES
installed in cupboard wall, opening: 66.7 mm
114 117
¼″
MS
0 – 11 bar
xxx xxx° = Can also be used as a fluid pressure gauge
102 019 Spare glass for 50.8 mm (2”) gauge
193 199 Adhesive foil (qty 12) for 50.8 mm (2”) gauge
193 200 Adhesive foil (qty 12) for 63.5 mm (2.5”) gauge
FLUID PRESSURE GAUGES
Part No.
187 875
101 176
195 583
187 874
113 673*
187 873
187 876
101 696
105 770*
112 564
802 072*
102 397
112 941*
102 814*
115 523*
113 654*
114 434*
804 582*†
Input
NPT
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
Material
fitting
ES
MS
ES
ES
MS
ES
ES
MS
MS
ES
MS
Display
range
0 – 2.1 bar
0 – 4.1 bar
0 – 4.1 bar
0 – 7.0 bar
0 – 7.0 bar
0 – 14 bar
0 – 21 bar
0 – 70 bar
0 – 70 bar
0 – 100 bar
0 – 100 bar
Ring/housing
Ø
Mounting
stainless steel
Chrome
stainless steel
stainless steel
stainless steel
stainless steel
stainless steel
Chrome
stainless steel
stainless steel
stainless steel
63.5
50.8
63.5
63.5
50.8
63.5
63.5
50.8
63.5
63.5
63.5
down
down
down
down
down
down
down
down
down
down
down
MS
ES
MS
MS
ES
ES
MS
0 – 207 bar
0 – 350 bar
0 – 350 bar
0 – 350 bar
0 – 350 bar
0 – 700 bar
0 – 350 bar
Chrome
stainless steel
stainless steel
stainless steel
stainless steel
stainless steel
stainless steel
50.8
63.5
63.5
63.5
63.5
63.5
63.5
Rear
down
down
Rear
Rear
Rear
Rear
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
xxx xxx* = Filled with damping liquid † = G-Force, scale in PSI, 0–5000
GAUGES WITH PULSATION DAMPING
(membrane and liquid)
206 171*
¼″ NPT(I)
MS
0 – 14 bar
Chrome
50.8
down
110 182*
114 852*
¼″ NPT(I)
½″ BSP(I)
ES
ES
0 – 140 bar
0 – 410 bar
stainless steel
stainless steel
63.5
107
down
down
6773 222*
¾″ BSP(A)
ES
0 – 400 bar
stainless steel
56.5
down
11 – 1
110 146
106 148
515 873
106 149
106 150
112 859
109 075
206 199
114 124
117 629
15D 795
110 148
202 858
238 980
206 237
239 957
239 956
214 847
214 848
214 849
237 212
238 272
116 521
246 948
104 632
07/08/08
246 946
208 627
110 318
238 724
110 149
238 939
244 720
104 815
244 841
236 211
12 – 1
206 197
180 187
207 755
112 728
110 234
104 266
104 267
171 937
205 712
207 651
218 315
236 989
110 150
217 072
217 073
238 590
246 947
110 341
111 804
248 829
113 765
113 494
202 660
238 881
224 040
217 075
217 074
202 844
Part No.
Name
110 146
106 148
106 149
106 150
112 859
114 124
117 629
15D 795
104 815
110 341
111 804
110 318
115 243
115 242
116 513
110 234
104 266
104 267
171 937
114 105
114 459
206 197
180 187
207 755
112 728
110 147
109 075
244 844
206 199
110 149
110 150
217 072
217 073
238 939
238 980
239 956
239 957
239 975
239 976
240 446
240 231
238 590
238 613
202 858
206 237
238 272
248 829
238 724
205 712
207 651
218 315
236 989
246 946
246 947
113 765
113 494
238 881
244 720
116 521
244 841
202 660
217 074
217 075
202 844
224 040
104 632
236 211
208 627
6789 257
110 148 Air lubricator, ¼” NPT(I)
Air filter ¼″ NPT(I), 20 micron
Air filter ⅜″ NPT(I), 20 micron, 515 873 air filter 5 micron 214 847 Air lubricator, ⅜” NPT(I)
Air filter ½″ NPT(I), 20 micron
214 848 Air lubricator, ½” NPT(I)
Air filter ¾″ NPT(I), 40 micron
214 849 Air lubricator, ¾” NPT(I)
Air filter 1″ NPT(I), 40 micron
237 212 Air lubricator, 1” NPT(I)
Air filter ⅜″ NPT(I), 10.3 bar, 5 micron filter element 114228
Air filter ⅜″ NPT(I), 10.3 bar, 5 micron filter element 114228, with auto drain
Air filter ½″ NPT(I), 10.3 bar, 40 micron filter element, with auto drain
Air regulator 0 – 4.2 bar, ⅛″ NPT(I)
Air regulator 0 – 9 bar, ⅛” NPT(I) – piston-controlled
Air regulator 0 – 9 bar, ¼” NPT(I) – piston-controlled
Air regulator 0 – 12 bar, ¼” NPT(I)
Air regulator 0 – 21 bar, ¼” NPT(I) with gauge 0.3 – 3.4 bar
Air regulator 0 – 21 bar, ¼” NPT(I) with gauge 0.3 – 7 bar
Air regulator 0 – 21 bar, ¼” NPT(I)
Air regulator 0 – 17.5 bar, ⅜” NPT(I)
Air regulator 0 – 17.5 bar, ½” NPT(I)
Air regulator 0 – 21 bar, ½” NPT(I) with gauge 0 – 8.6 bar
Air regulator 0 – 9 bar, ½” NPT(I) – Mylar membrane
Air regulator H.V. ½″, Max. inlet 20 bar, regulated pressure range 0.3 – 10 bar
Air regulator H.V. 1″, Max. inlet 20 bar, regulated pressure range 0.3 – 10 bar
Air regulator 0 – 9 bar, ½” NPT(I)
Air regulator 0 – 5.6 bar, ¾” NPT(I)
Air regulator 0 – 9 bar, ¾” NPT(I)
Air regulator 0 – 9 bar, 1” NPT(I)
Air regulator 0 – 9 bar, ¼” NPT(I) with gauge 0 – 14 bar
Air regulator ⅜” NPT(I) with gauge
Air regulator ½” NPT(I) (104 266) with gauge
Air regulator ½” NPT(I) (206,197) with gauge
Regulator kit, maximum 21 bar, ¼”
Regulator kit, maximum 17.5 bar, ⅜”
Regulator kit, maximum 17.5 bar, ½”
Regulator kit, maximum 17.5 bar, ¾”
Filter air pressure regulator set, ½” NPS(I) air inlet for Monark and President AA units mobile
Air pressure regulator set, ⅜” NPS(I) air inlet for Monark and President AA units mobile
Filter air pressure regulator set, ⅜” NPS(I), air inlet for Monark and Pres. AA units wall units
Air pressure regulator set, ⅜” NPS(I) air inlet for Monark and President AA wall units
Filter air pressure regulator kit, ½“ NPS(I) air inlet for Monark. AA units on small cart
Air pressure regulator set, ⅜” NPS(I) air inlet for Monark airless units on small cart
Air pressure regulator set, ⅜” NPS(I) air inlet for Monark AA bucket unit
Air pressure regulator set, ⅜” NPS(I) air inlet for Monark airless bucket unit
Regulator Kit set, 17.5 bar, King Bull Senator
Regulator Kit set, 17.5 bar, King Bull Senator AA system
Air regulator, ⅜” NPT(A) x ½” NPS(I) with gauge
Air regulator set with gauge, air blowing gun
Air regulator set with gauge, shut-off cock, ½” President
Air regulator set with gauge, shut-off cock, 3/8” Monark, Markur, feed pumps
Air regulator set, incl. regulator ½″, gauge, manifold ¾″NPS(I) inlet and plug
Air regulator set Bulldog with gauge, air valve 1 – 9 bar pressure regulating range
Air regulator set King with gauge, air valve 1 – 9 bar pressure regulating range
Air regulator set King with gauge, air valve 1 – 5.6 bar pressure regulating range
Air regulator set Premier with gauge, air valve 1 – 9 bar pressure regulating range
Filter air pressure regulator, ¼″ with gauge
Filter air pressure regulator, ½″ with gauge
Filter – air pressure regulator, ⅜”
Filter – air pressure regulator, ¾”
Filter – air pressure regulator set ¾”
Filter – air pressure regulator set ¾” Xtreme,
Filter – air pressure regulator ¾″ Xtreme model 246 948 = 116 521 with gauge C36260
Air lubricator set, Xtreme accessories
Filter – wall mounting, ½” inlet, 2 outlet via ¼” ball valve
Filter, ½”, 40 micron
Filter regulating set, ½” inlet, 2 outlet via regulator, two direct
Even-Flo, air regulator, control valve, air hose
Pump runaway valve, ¾ NPT(I) inlet, ¾″ NPS(I) outlet
3-way control valve 3 x ½″NPT(I), ⅛″ NPT(I) pilot air fitting
Air blow gun
Air blow gun
Kilfrost, 1 litre
07/08/2008 11:41
307/308
12 – 2
308 169
308 167
308 859
308 168
308 167
308 169
308 686
308 722
308 167
308 167
308 168
310 863
308 168
308 168
308 168
308 168
308 169
308 169
308 686
308 648
308 648
309 341
308 169
309 341
306 273
307 476
306 479
308 201
307 081
CARTS AND ELEVATORS
247 312
233 581
243 606
205 054
204 144
240 223
203 622
287 884
244 530
238 938
203 650
237 557
236 943
224 137
207 561
204 352
204 510
204 461
204 121
02/02/09
204 124
204 385
207 408
237 579
206 276
204 490
206 232
205 332
111 470
237 746
237 902
13 – 1
241 663
203 664
204 740
205 339
CARTS AND ELEVATORS
Part No.
Name
306/310
205 054
204 144
203 622
241 646
Ring cart 19 l (5 gallons)
Ring cart 38 l – 61 l (10 – 16 gallons)
Roller support (4 rollers) for 120 lb drum
Cart
(4 rollers) for Falcon
308 668
308 994
233 581
243 606
240 223
238 938
244 530
287 884
247 312
236 943
203 650
237 557
224 137
111 470
203 664
2-wheel cart for Triton 308 high floor bottom spacer 507 mm
2-wheel cart for Falcon, Merkur high floor top edge engine fixing 525 mm
2-wheel cart (small) for Monark, Husky 307, high floor bottom spacer 513 mm
2-wheel cart for Monark, President, high floor bottom spacer 567 mm
2-wheel cart for Xtreme, Bulldog, King, with mounting holes for heater, height 714 mm
2-wheel cart for pumps with NXT – motor 3400/6500, high floor bottom spacer 813 mm
Adapter plate for cart 287 884 is also needed for pumps with MXT motor 2200
2-wheel cart for Premier, high floor bottom spacer 866 mm
2-wheel cart for 20 and 40 litre container
2-wheel cart bare, universal
2-wheel cart with pneumatic elevator and stop CM 200/450 standard, stroke height 465 mm
3-wheel cart for 200 litre drum
Hand elevator bracket fits cart 203 650
309 304
204 510
204 461
206 232
207 561
237 579
206 276
204 740
205 339
Pump assembly set including air control set (Monark, President)
Pump assembly set including control for follower plate
Pump assembly set (Bull, King)
Air regulator kit elevator
Air regulator kit elevator for mounting on stainless steel covers
Air control set (Bulldog)
Base plate 60 l / 120 lbs
Base plate 200l
306 568
306 556
306 287
306 287
205 332
204 121
204 124
204 385
207 408
237 746*
237 902*
241 663*
202 777
207 562
Elevator, 40 litre (Monark, President), stroke height 465 mm, extended 1.476 mm
Elevator, 60 litre (120 lb) bare (Fire-Ball) stroke height 743 mm
Elevator, 60 litre (120 lb) (Fire-Ball) stroke height 743 mm, with drum cover ∅ internal 385 mm
Elevator, bare for Fire-Ball, Monark and President, stroke height 965 mm, extended 2.370 mm
Elevator, bare for Bulldog, King (heavy design), stroke height 897 mm, extended 2.439 mm
Elevator (for drum cover mounted pump Mon. and Pres., with SST cover, elevator 204 385)
Elevator (for drum cover mounted pump, Bull; King only with SST cover, elevator 207 408)
Elevator (for drum cover mounted pump, for normal steel cover, elevator 204 385)
Retaining ring, necessary for 237 746, if normal steel cover plus bracket is used
Cover bracket (225 758, only normal steel cover), bracket I.D. 24 ⅞ = 631.83 mm mounting on 204
385 or 207 408
Elevator, complete for open 200 l drums, Monark, President, for bunghole pump also use
mounting plate 184140
Elevator, complete (including 204 385) 200 litre drum
306 287
306 522
204 352
204 490
* the cover is not included !! please order separately
237 746 or 237 902 elevator complete
incl. 237 578 cover mount and
237 579 air control kit,
fits SST cover
(order cover separately)
02/02/09
13 – 2
309 342
311 164
308 415
306 436
308 567
308 092
308 154
306 472
306 781
306 523
306 556
306 287
306 287
306 287
306 287
306 287
306 287
306 287
306 568
306 556
RAMS AND STANDS
247 312
555mm
218 743
245 131
237 960
237 392
241 915
198 347
190 737
190 166
218 742
223 952
222 780
190 737
190 166
220 581
217 296
241 693
205 640
205 700
253 692
222 776
237 636
237 561
237 788
206 450
222 781
224 829
Clamps
224 266
224 267
184 140
162 789
108 048
206 537
162 225
511 270
Ram 3“ D30
918 405
918 495
255 763
918 395
C32 463
160 098
161 452
180 748
Ram 3“ & 6,5“
D200 & D200S
Ram 3“ mit
Folgeplatte
918 304
233 087
918 420
255 648
255 688
918 309
234 015
sanitary
207 279
244 072
05/01/09
14 - 1
918 468
918 393
918 478
918 396
RAMS AND STANDS
Part No.
Name
manual
206 450
222 781
237 636
237 561
237 788
Single cylinder RAM, 20 litre, bare, stroke height 380 mm
Single cylinder RAM, 20 litre, bare for Check-Mate pump, 200/450 long Monark, President
Single cylinder RAM, 20 litre, bare for Check-Mate pump, 200/450 short Monark, President
Single cylinder RAM, 20 litre, bare for Check-Mate pump, 450/800 Bulldog, Senator
Single cylinder RAM, 19 litre, with air control 238 724, for NXT- Air motor
306 838
306 838
306 838
306 838
312 373
918 405
918 495
241 086
255 763
Two-cylinder RAM, 3”, 5 gallons, bare without accessories, stroke height 485 mm
Similar 918 405 but with air control kit 918 406 & shutoff/cock to follower plate
Two-cylinder RAM, 3”, 30 l, bare without accessories, stroke height 610 mm
Two-cylinder RAM, 3”, “D30” , with air control kit 238 724, stroke height (551mm)
310 525
310 525
310 525
312 373
207 279
255 648
Two cylinder RAM 3”, 200 litre, with follower plate 238 929 ring EPDM, note accessories
Two cylinder RAM “D200” 3” 200 liter, with air control kit 255 650
For more RAM and accessories please look in chapter 1b NXT
306 934
312 373
233 087
244 072
918 420
255 688
918 309
918 304
Two-cylinder RAM 6.5”, 200 litre bare, without accessories (follower plate rods etc.)
Air regulator kit 200 l, 6.5” RAM (global)
Two-cylinder RAM 6.5” hydraulic, 200 litre bare without accessories
Two-cylinder RAM “D200S” 6.5” hydraulic, 200 litre, with air control kit 255 650
Rod mounting kit for Bulldog, King pumps in global RAM, cold application
Rod mounting kit for Premier pumps in global RAM, cold application
310 523
310 524
310 523
312 373
310 524
310 524
184 140
162 225
224 829
206 537
C32 463
918 395
918 397
511 270
222 792
Mounting plate (without screws) for fitting Monark, President, Check-Mate in RAMs
Mounting plate from Fire-Ball 10:1, 50:1 & 75:1, in RAMs, mounting kit 247 337
Assembly kit for mounting Check-Mate 200 in 200 litre RAM, incl. 161 452 seal
Drum bracket kit for 200 litre RAM 207 279
Drum bracket for 6.5” 200l RAM (2 brackets required)
Drum bracket for 6.5”, 200l RAM
Drum bracket for 6,5” (5 clamp`s)
Pneumatic signal horn
Kit of protective plates (qty 10) polyethylene for 200 l follower plate
306 934
218 743
241 915
205 640
205 700
218 742
220 581
253 692
247 312
217 296
241 693
223 952
222 780
245 132
237 961
237 781
222 776
198 347
245 131
190 737
237 960
237 961
190 166
237 392
237 781
160 098
161 452
180 748
162 789
108 048
224 266
224 267
Stand, Falcon, without the corresponding plate, 4 x 108 175 foot plug and screws
Stand, Falcon
Stand for Bull, King, total height 640 mm
Stand for Bull, King, total height 945 mm
Stand for HF pump and pulsation dampeners
Stand for HF pump,
Total height 952.5 mm
Stand, for pumps with NXT motors 3400/6500,
Total height 1048 mm
Adapter plate for stand 253 692 is also needed for pumps with NXT motor 2200
Stand, Foam-Cat, heater
Total height 826 mm
Stand, Hydra-Cat, FRHC (Console 236 061)
Total height 826 mm
Floor stand, bare for 10:1 Bull and 20:1 King, SH, grease delivery, without seal and screws
Floor stand for Check-Mate 450, Dura Flo 1800 and 2400, material inlet 3” NPT
Floor stand for Xtreme pumps, material inlet 3” NPT(I)
Floor stand kit for Dura-Flo 600 and 750 with 1 ½” inlet thread (including 222 776)
Floor stand kit for Dura-Flo 900 and 1200 with 2” inlet thread (including 222 776)
Assembly kit for assembling Check-Mate 450/2100 and Dura-Flo
Assembly adapter für 1-1/4”NPT(F) (64mm), Xtreme Unterpumpe
Floor stand kit for Xtreme – Pumpe (incl. adapter 198 347)
Assembly adapter for 1-1/2”NPT(M) (64mm), Dura Flo145cm³, 180cm³
Floor stand kit for Dura Flo – Pumpe 145-180cm³ (incl. adapter 190 737)
similar 237960 but with Adapter 222 274 and valve ball 208 390
Assembly adapter für 2”NPT(M) (64mm), Dura Flo 220cm³, 290cm³
Floor stand kit for Dura Flo – Pumpe 220-290cm³ (inkl. Adapter 190 166)
similar 237392 but additional with Adapter 222 274 and valve ball 208 390
Sealing ring I.D. 50.8 mm seal packing on pump inlet and plate of the 200l RAM
Sealing plate I.D. 69.6 mm, 2 required (packing on pump inlet and plate of the RAM)
Sealing plate I.D. 79.4 mm, 2 required (packing on pump inlet and plate of the RAM)
Adapter kit, incl. Order O-ring to mount the 50/75:1 Pres. in 200 l RAM separately 160098
Adapter kit, incl. Order O-ring to mount the 50:1 Pres. in 200 l RAM separately 160098
308 994
309 022
306 720
306 720
307 678
307 837
311 619
234 015
15B 111
15B 114
947 376
Two cylinder RAM 3” sanitary stainless steel without follower plate, connection rods
Follower plate Ø 546 mm (21.5″), stainless steel with inflatable neoprene seal incl. air regulator
Follower plate Ø 571.5 mm (21.5″), stainl. steel with inflatable neoprene seal incl. air regulator
Connection rod RAM follower plate (2 required)
308 027
312 373
307 551
307 971
307 971
308 027
406 513
406 305
406 397
406 297
309 345
Sanitary rams
05/01/09
14 – 2
310 572
309 549
309 549
309 505
WALL, DRUM BRACKETS, SUCTION TUBES AND KITS
Mountings
Bung holes
193 169
176 684
222 308
100 220 (screw)
214 583
214 592
217 359
204 076
192 931
192 586
239 966
239 965
192 592
Drum clamp
192 768
192 767
205 740
Mountings
(mounting plate)
192 589
210 880
204 858
203 156
204 095
255 143 (NXT)
Adapter 247 312 (NXT2200)
192 584
6720 083
236 342
245 136
206 220
206 221
210 881
236 061
Suction tube
203 987
236 778
189 233
206 778
Container
Suctions Kit
243 167
098 301
098 265
221 094
6707 014 165 767
6707 020 197 682
192 121
112 191
170 113
15F 149
188 867
206 266 246 419 184 475
236 054
Suction kit
207 484
208 920
06/01/09
245 176
222 916
15 – 1
237 068
207 485
208 259
203 981
WALL, DRUM BRACKETS, SUCTION TUBES AND KITS
Part No.
Description
Manual
176 684
214 583
222 308
205 573
217 359
204 076
239 966
239 965
Bung adapter, suction tube 206 266, screw 100 200 order separately (I.D. Ø 38.4)
Bung adapter, Fast-Flo (metric construction)
Bung adapter, Fire-Ball, 5:1 Monark, 10:1 President
Bung adapter, 5:1 Monark, 10:1 President stainless steel
Bung adapter, sealed, Fast-Flo (metric construction) I.D. Ø 51 mm
Bung adapter, Fast-Flo (O-ring seal) I.D. Ø 54.3 mm
Bung adapter, 2″ x 32.76 I.D. Ø for 15/50:1 Fire-Ball
Bung adapter, 2″ x 41.9 I.D. Ø for 50/75:1 President
308 069
307 427
306 518
308 118
307 552
306 010
308 900
308 900
210 881
203 987
236 778
Wall bracket, Fast-Flo (metric construction)
Wall bracket, Fast-Flo, 5:1 Fire-Ball
Wall bracket for 3/6:1 President Lube
307 427
306 508
308 394
210 880
204 858
203 156
204 095
Drum bracket, Fast-Flo (metric construction)
Drum bracket, stainless steel for bunghole pump
Drum bracket for open drums
Drum bracket for fixing pumps up to Ø 54 mm in the 2” bunghole
307 427
307 026
306 305
306 521
6720 083
3 litre kit, 15/23:1 Monark, only kit 6711307,
243 496
5 litre kit, 395/495 St Pro, only kit 188 787-787, strainer 112-133 (previous 236 342)
309 166
224 835
189 233
206 778
206 220
206 221
236 061
192 584
192 589
192 592
255 143
247 312
192 767
192 768
192 931
192 586
193 169
205 740
Wall kit, Husky 307/ 716/ 515
Wall kit, Husky 1040
Wall kit, Monark, President – 3 connection rods
Wall kit, Monark, President – 2 connection rods
Wall kit, Bull, King, Viscount II, Glutton
Wall kit, Hydra-Cat FRHC
Wall kit for President HF, Viscount I, plus plate for Husky 1040
Wall kit for console 192 584
Plate for mounting a Husky 1040 to wall kit 192 584
Wall console NXT motors 3400 / 6500
Adapter plate also necessary for NXT 2000 motors
Plate, front, for mounting Monark, President (3 connection rods) on kit 192 584
Plate, rear, assembly together with 192 767
Bracket for mounting fluid pressure regulator 222 121 on console 192 584
Bracket for mounting fluid pressure regulator 236 770 on console 192 584
Bracket only for filter 240 183
Plate, for mounting ¾:1 President, 2 connection rods in stands 205 640, 205 700 etc.
308 553
308 479
306 783
306 783
306 783
308 225
308 770/3
6707 014
6707 020
196 094
196 095
196 096
184 475
165 767
197 682
192 121
Suction tube, ¾” NPT(I), 450 mm long for 20-30 l (steel), straight, OD Ø 20 mm
Suction tube, 1” NPT(I),(steel) , straight, OD Ø 28 mm
Suction tube, straight ¾” NPT(A), for 200 l Ø 27 mm, stainless steel
Suction tube, straight ¾” NPT(A), for 200 l Ø 27 mm, aluminium
Suction tube, straight ¾” NPT(A), for 200 l Ø 27 mm, polypropylene
Suction tube, straight 1 ½” NPT(A), for 200 l (steel)
Suction tube, ¾” NPT(I), 90°, 450 mm, OD 21 mm for 20-30 l (alu)
Suction tube, 1” NPT(I), 90°, 464 mm for 20-40 l (a lu), Ø 33.4 mm, 1” inlet thread
Suction tube, ¾” NPT(I), 90°, 450 mm for 20-40 l, O D,Ø 21.5 mm for 20-40 l
(alu with ½” inlet thread)
Suction tube, ¾” NPT(I), 90°, 450 mm, OD 27 mm, (SST), with ¾” inlet thread
Suction tube, plug-in tube ¾”, 90° for 20-30 l O.D. Ø 27 mm (alu with ½” thread)
Suction tube, plug-in tube 1”, 90° for 20-30 l (alu 1” thread), Ø 33
Suction tube, ¾” NPT(I), 90° for 200 l (steel) Ø 38 mm (ball 100 279 can be used in the foot )
Suction tube, 1″ NPT(I) straight, 200 l (steel) Ø38 with foot valve & sealed Sp adapter
Suction tube, ¾” NPT(I), 90° for 200 l, stainless s teel, bung adapter 188 940 and screw
100 220 (5/16″ – 18 UNC), (normal steel) must be ordered separately, SST 111 276, inlet ¾″NPS
6000 173
6000 085
309 116
309 116
309 116
308 179
306 761
309 329
207 484
208 920
241 634
245 176
245 136
236 054
207 485
208 259
221 094
237 068
222 916
223 009
203 981
203 992
Suction set, 20-30 l with 1.05 m ¾” hose, connection thread ¾” NPS(I)
Suction set, 20-30 l with 1.2 m 1” hose, connection thread ¾” NPS(I)
Suction set without suction filter, with 1.2 m hose ⅜” I.D. polyethylene core, 9/16-18 UNF
Suction set 20-40 l, Xtreme, with 1.8 m 1″ hose, adapter 1″NPT(A), elbow 1″NPT(I) x 1 ¼″ NPT(I)
Tube extension set for 245 176, can be used as 200 l suction set
Suction set, 200 l with 1.8 m ¾” Buna-N hose, connection thread 1 ½” NPT(A)
Suction set, 200 l with 1.8 m ¾″ hose, connection thread ¾″ NPS(I) (foot valve), A.D. Ø 38 mm
Suction set, 200 l with 1.8 m ¾” hose, connection thread ¾” NPS(I), O.D. Ø 38 mm
Suction set, ¾”, 200 l Husky 715, bung adapter polyethylene, tube SST 1.4301
Suction set, 20-30 l with 1.8 m 1” hose with nylon core, bush 2”(A) and suction strainer
Suction set, 200 l with 2.4 m polyethylene hose 1 ½” I.D. connection 1 ½”
Suction set, (206 266 and 221 171)
Suction set, 200 l with 1.8 m ¾” Buna-N hose, connection 1 ½” NPT(A), float and console
Suction set, 200 l with 1.8 m ¾” Buna-N hose, connection 1 ½” NPT(A), shut-off float
307 039
307 106
308 994
309 342
243 167
098 301
098 265
Container suction set, 1”, Mark V model 232 173 and 245 045
Container suction set, ¾” Mark V (with foot valve)
Container suction set, ¾”, all units with ¾ NPT(A) thread at the pump inlet
112 191
183 769
15F 149
206 266
246 419
188 867
06/01/09
15 – 2
308 773
311 619
308 757
308 757
308 768
308 333
307 039
310 893
306 787
309 815
308 332
308 335
307 111
307 855
308 415
308 179
306 508
306 508
EU 296
AGITATORS
204 536
224 571
222 695
221 096
224 572
207 953
206 760
206 758
222 698
210 067
210 068
203 711
206 219
193 315
110 270
193 316
245 081
205 715
225 831
225 883
224 854
235 534
236 629
236 760
236 661
236 662
236 663
113 779
202 659
191 920
231 414
231 413
239 857
238 157
05/08/08
238 250
16 – 1
191 606
207 199
226 086
243 340
AGITATORS
Part No.
224 571
222 695
204 536
221 096
245 081
193 315
Motor
Part No.
Output
101 687
0.2 kW
224 572
206 758
222 698
206 760
207 953
207 199
101 687
101 140
101 140
101 388
101 140
101 140
0.2 kW
0.4 kW
0.4 kW
0.8 kW
0.4 kW
0.4 kW
225 883
226 086
243 340
101 487
1.9 kW
101 687
0.2 kW
203 711
204 995
101 140
206 219
204 482
205 715
101 487
210 067
101 140
210 068
225 831
101 388
LSA-117/200
224 854
111 310
235 534
236 629
101 140
236 760
112 723
236 661
236 662
236 663
238 157
240 209
231 414
231 413
239 857
191 920
191 606
202 659
162 425
101 140
0.4 kW
1.9 kW
0.4 kW
0.8 kW
1.1 kW
0.4 kW
0.4 kW
0.4 kW
Name
Agitator 306/310
vane
Ø mm
For 5 gallons stainless steel, needle valve, shaft length 325 mm
For 5 gallons stainless steel, needle valve, air hose
For 5 gallons stainless steel, airline
For 5 gallons stainless steel for Husky 715
For 5 gallons stainless steel for Triton 308 cover mounting
Adapter I.D Ø 31.83 mm, A.D; 43.64 mm for 0.2 kW agitator,
separate 193 316 nut, & 2 x 110 272 clamping screw
For 10 gall. stainless steel, needle valve, shaft length 420 mm
200 l drum
200 l drum, stainless steel (one agitator vane)
0.8 kW 60 gallons Mix tanks 845 mm
0.4 kW 15 gallons Mix tanks 711 mm
Complete with drum cover (237 306 & adapt 206 258) for 200 l
drum
Open 200 l drum with drum bracket
5 gallons, agitator with pot cover, CS
5 gallons, agitator (224,571-571) with pot cover SST, without
hand grip
200 l drum, siphon hose for drum cover with support base
200 l drum, H.D. pump for drum cover with support base
200 l drum, H.D. for drum cover without support base
200 l drum (for 2:1 standard)
200 l drum, (cover fastening)
15 gall. Mix tanks stainless steel
30 gall. Mix tanks stainless steel
Open 200 l drum bracket
300 litre – 1100 litre tanks, use 5 micron air filter
Twistork worm agitator, 200 l bunghole drum, max 10000 cP
Twistork worm agitator, stainless steel, 200 l, 845 mm
Twistork with suction ¾″, SST, reducing gear 1,82:1
Twistork with suction ¾”, oilfree*, right-handed/left-handed
rotation, SST, ratio 1.82
19 l (5 gall.) stainless steel, bronze, reducer 20:1
200 l drum, stainless steel, reducer 24:1, max 2000 cP
Same as 238 157 with suction hose kit without agitator blades
200 l elevator- agitator kit with siphon hose kit (238 250)
200 l elevator agitator kit without siphon hose
200 l elevator agitator kit fits 3:1 Pres. HF, Husky 1040 module
Extension for 238 157, total length 990 mm
Extension for 238 157, total length 1.219 mm
Air motor oil 470 cm³ (1 pint)
96
306 565
306 565
306 565
307 857
309 306
308 822
96
140
140
140
140
140
306 565
306 840
306 840
306 840
306 840
306 938
191
96
96
306 426
306 670
306 565
191
306 459
306 459
306 459
306 558
307 277
203
307 154
140
306 358
310 500
140
308 175
308 345
216
308 371
508
308 609
308 609
308 609
308 609
308 769
207 337
Repair kit for air motor 101 687 (and R.P. 0.3 kW 6 bar)
207 335
Repair kit for air motor 101 140 (and R.P. 0.56 kW 6 bar)
207 335
Repair kit for air motor 162 425
224 954
207 336
236 996
113 779
Muffler ¼″ NPT(A)
For operation there should be an upstream oil fogger with acid-free lubricant with approx. 2-3° Engler (20 mm²/s),
oil supply under load approx. 1-3 drops per minute.
* = oil-free to maximum 1800rpm. Only motor 112 723
Technical data
Motor power
Inlet air pressure
Speed range
Air consumption
Motor power
Inlet air pressure
Speed range
Air consumption
05/08/08
0.2 kW at 6000 rpm and 5.6 bar
To max. 7 bar.
500 to 6000 rpm
70 l/min at 3000 rpm and 1.4 bar
To max. 7 bar.
300 to 3000 rpm
16 – 2
To max. 7 bar.
500 to 6000 rpm
To max. 7 bar.
300 to 2500 rpm
AGITATORS GV
100
101
102
103
Pos.
Name
Note
100
101
102
103
104
105
Shaft
D 16, L300
Shaft
D 16, L450
Shaft
D 16, L800
Propeller
D110
Hose
8/6, L*
Compr. air motor spare part
Item No.
76620 020003
76620 020005
76620 020008
77368 008001
70346 008002
75971 011005
High performance propeller
D110
79578 007002
Part No.
79578 007002
76620 020003
76620 020005
76620 020008
77368 008001
75665 006002
75665 006003
65476 005002
75665 006002
75665 006003
Name
Agitator motor 0.6 kW/6 bar with reducing gear 1:25, shaft rotational speed 40 – 159 rpm
Shaft Ø 16 mm, length 300, SST 1.4305
Propeller Ø 110 mm
Muffler 1/8”,
Ø 24 mm
Muffler ¼”,
Ø 24 mm
Repair kit for 0.5 kW motor, contains: 2 bearings, 4 vanes
Shaft seal, 3 housing seals and end cap seal
Manual
IT1.18.10.15B
65476 005002 Repair kit contains:
Pos.:
Name:
Quantity:
2
3
5
8
10
05/08/08
16 – 3
End cap seal
Ball bearing
Housing seal
Vane
Shaft seal
1
2
2
4
1
HEATERS & HEATER BANDS
Heated basic unit
HD – heater
3 KW
226 819
226 816
6 KW
Drum heating band
15F 028
245 848
245 863
246 254
245 867
245 869
246 276
192 585
Wall mounting
Connection:
black – L1
white – N
green – GND
Part No.
Type NPT Thread
237 947
239 852
239 850
226 816
226 819
245 848
245 863
246 254
HD heater 245-863, 240 Volt and electric cable
HD heater 245-863, 240 Volt and ½″ 0.60 m hose max 35 bar, fittings & bracket
HD heater 245-848, 120 Volt and ½″ 0.60 m hose max 35 bar, fittings & bracket
HD heater, 207 bar, 120 Volt, 2100 Watt, 18 Ampere
HD heater, 207 bar, 240 Volt, 2100 Watt, 9 Ampere
Heater, 500 bar, stainless steel, 120 Volt, 2300 Watt, 19.2 Ampere Hazardous EEx d IIB
T2 (250°C)
T2 (250°C)
T2 (250°C)
Heater, 500 bar, stainless steel, 120 Volt, 2300 Watt, 19.2 Ampere without Hazardous
245 867
245 869
246 276
Part No.
Type BSP thread
Name
Name
306/310
309-524
308-771
307-363
309-524
309-524
6000304
Basic design includes: temperature regulator, 5 m cable, hose connection (can swivel only at 6 kW), 230 V or
special design 400 V, maximum working pressure 280 bar
79251 001004 280.3-400
Heater, aluminium, 400 Volt, 3 kW
15F 028
Drum heating band, 200l drum, 230 V, 1000 Watt, 4.5 Amp., 76 mm wide
Connection (black & white 230V) green =GND
Accessories
76746 016001
77214 017003
76640 005001
76639 016003
75791 002001
74050 039003
192 585
Metal plate/bracket for 6 KW heater
Bracket G-⅜″ can swivel, stainless steel
Double nipple G ⅜(A) x G ⅜(A), stainless steel
Reducing nipple G ⅜(A) x G ¼(A), stainless steel
Dial indicating thermometer 0 – 120 °C
Setscrew M5 x 5
Wall bracket for model 237 947 to 246 254
05/08/2008 16:12
17-1
PRESSURE POT`S
239 802 Pressure Pot
SST, 0.95 litre,
with check valve /
air-regulator /
relief valve /
SST, 0.95 litre,
with check valve / air-regulator /
relief valve / hose kit 1.8 m /
SST, 0.95 litre,
with check valve / two airregulators / relief valve
244 130
214 627
(1.9 litre)
171 226
240 045
(9.5 litre)
236 155
236 157
236 156
236 158
(7.5 litre)
(7.5 litre)
112 632
112 077
112 078
111 330
112 633
236 143
236 144
236 145
236 149
236 150
236 151
01.10.2008 10:01
236 146
236 147
236 148
236 152
236 153
236 154
112 490
112 491
M70 695
18 – 1
117 572
117 575
103 994
244 953
117 571
117 574
189 883
M70 424
240 265
198 905
M71 425
183 337
PRESSURE POT`S
Part No.
244 130
239 802
239 803
239 804
Siphon cup/pressure pot, aluminium,
Pressure pot, stainless steel,
0.95 l
0.95 l max 0.8 bar, 1.8 m hose kit, single air regulator
0.95 l max 0.8 bar, 1.8 m hose kit, double air regulator
0.95 l max 0.8 bar, 1.8 m hose kit, remote
309 205
214 627
287 819
287 302
Pressure pot, aluminium,
Pressure pot (287 819)
1.9l max 3.5 bar, 1.8 m hose kit
with air regulator kit and hose kit
bare
307 318
311 359
311 359
171 226
240 045
Pressure pot, aluminium, inside PTFE,
9.5 l max 3.5 bar,
9.5 l max 3.5 bar,
307 133
309 243
236 155
236 156
236 157
236 158
7.5 l, max 1.1 bar,
7.5 l, max 1.1 bar, with agitator
7.5 l, max 7.0 bar,
308 370
308 370
308 370
308 370
236 143
236 144
236 145
19.0 l, max 1.05 bar,
38.0 l, max 1.05 bar,
57.0 l, max 1.05 bar,
308 369
308 369
308 369
236 146
236 147
236 148
308 369
308 369
308 369
236 149
236 150
236 151
19.0 l, max 7.0 bar,
38.0 l, max 7.0 bar,
57.0 l, max 7.0 bar,
308 369
308 369
308 369
236 152
236 153
236 154
308 369
308 369
308 369
for 0.95 l pressure pot
308 791
307 318
Description
Manual
with air regulator
308 791
Accessories
240 266
112 491
M70695
Polyethylene insert bag kit (qty 40)
15D 058
112 077
112 078
15D 059
15D 060
15D 061
Polyethylene (liner) insert cup kit (qty 20)
Polyethylene (liner) insert pot kit (qty 5)
307 133
Cover gasket
Material
189 883
M70 424
240 265
198 905
120 132
287 821
15F 346
287 404
198 905
M71 425
183 337
117 572
117 575
103 994
244 953
M70 616
117 571
117 574
for Item
Polyethylene,
for 0.95 litre pressure pot HVLP & Delta siphon cup,
Polyethylene,
for 240-260, 1.0 litre suction cup/pressure pot HVLP,
Kit, (5 x M70-424) look above!
Polyethylene,
for M70-962, 1.94 litre pressure pot,
Polyethylene,
for 287 819,
Kit, (5 x 120 132) look above!
Viton CV-75,
for 287 819, 1.9 litre pressure pot,
Kit, (5 x 15F 346) look above!
Polyethylene,
for 244 732, 1.9 litre,
Kit, (5 x 198 905) look above!
Polyethylene,
for 214627 1.9 l pressure pot,
Santoprene,
for 7.5 l pressure pot,
PTFE coated,
Buna-N
Polyethylene,
for 9.5 l pressure pot, Kit (qty 3),
EDPM,
Santoprene,
for 19.0 l, 38.0 l, 57.0 l pressure pot
PTFE coated,
for 19.0 l, 38.0 l, 57.0 l pressure pot
01/10/08
18 – 2
diameter`s
(88.77 - 78.99mm)
(88,90 - 69,98mm)
(94.57 - 78.70mm)
(95,25 – 73,15mm)
308 791
308 810
308 336
308 832
311 359
(113,8 – 99,3mm)
311 359
(94,5 – 78,7mm)
(89.60 - 72.9mm)
(251,2 – 217,3mm)
similar above!
(215,9 – 203,2mm)
(228,6 – 213,4mm)
similar above!
(384,3 – 345,2mm)
similar above!
307 318
308 370
307 133
308 832
308 369
OIL AND GREASE DISPENSING GUNS, HOSE REELS
Hose reel
Serie
500
350
224 060, 237 020
224 050, 237 030
224 051, 237 032
224 055, 237 022
224 056, 238 213
224 058,
.........
SDV15 Valve
237 728
245 410
255 852
255 885
206 941
255 853
255 856
Pro-Shot
Z-Swivel
242 055
242 056
242 057
242 058
Swivel
202 577
202 579
224 569
247 712, 247 713
247 714, 247 715
247 716, 247 717
204 083
204 084
255 854
255 857
XDV20 Valve
255 921
238 638
238 642
238 643
238 639
247 718, 247 721
247 722, 247 723
247 724, 247 725
LDM5 & LDP5
255 751
109 145
112 255
109 148
244 076
256 215
204 204
200 325
239 824
09/01/09
205 532
255 277
205 582
201 881
110 218
191 126
191 128
191 130
191 131
256 216
200 389
203 688
19 - 1
255 859
203 504
204 072
ÖL- UND FETT- ZAPFPISTOLEN, SCHLAUCHAUFROLLER
Part-No.
Description
224 060
224 050
224 055
224 056
224 058
224 051
237 728
245 410
242 055
242 056
242 057
242 058
206 941
┼ 218 340
┼ 218 341
204 083
204 084
202 577
202 579
224 569
247 712
247 713
247 714
247 715
247 716
247 717
255 857
Hose reel bare, ⅜″ max 550 bar, cs
Hose reel bare, ½″ max 124 bar, cs
Hose reel series 500 (grease), ¼″, 15 m hose, 345 bar
308 109
Hose reel (grease), ⅜″, 15 m hose, 280 bar
Hose reel (oil), ½″, 15 m hose, 126 bar
Hose reel (air/water), ⅜″, 18 m hose, 21 bar
Hose reel bare, series 700, max. 103 bar, for other hose reels see manual
308 546
Hose reel, bare series 750, 25 bar, for Husky pumps, inlet 1 ½″, outlet 1 ¼″
309 442
Pro-Shot Lubricating gun, ¼″ NPT(I) inlet, bare with safety latch
Pro-Shot Lubricating gun, ¼″ NPT(I) inlet, bare with discharge tube hydraulic coupling and safety latch
309 032
Pro-Shot Lubricating gun, ⅜″ NPT(I) inlet, bare with safety latch
Pro-Shot Lubricating gun, ⅜″ NPT(I) inlet, with discharge tube hydraulic coupling and safety
Hose reel (two hoses)
306 864
Hose stopper 6-11 mm hose
Hose stopper 12-23 mm hose
Swivel, straight, ¼″ NPT(A) x ⅛″ NPT
306 708
Swivel, straight, ¼″ NPT(A) x ¼″ NPT
306 708
Z-swivel, ¼″
308 112
Z-swivel, ⅛″ NPT(A) x ¼″ NPT
306 708
Z-swivel, ⅜″
308 112
Dispensing gun (247 717) ½″ inlet with 255 852) ¾“ outlet tube and tip, motor oil
Dispensing gun (247 717) ½″ inlet with (255 853) ¾“ outlet hose and tip, motor oil
Dispensing gun (247 717) ½″ inlet with (255 854) ½“ outlet tube and adapter ½“ – ¾“,
312 789
Dispensing gun (247 717) ½″ inlet with (255 855) ¾“ outlet tube, anti freeze
Dispensing gun (247 717) ½″ inlet with (255 855) ¾“ outlet hose and tip, anti freeze
Dispensing gun SDV15 ½“ inlet with ¾“ outlet bare ( without tube or tip)
¾“ outlet tube and tip, motor oil and anti freeze
255 858
¾“ outlet hose and tip, motor oil and anti freeze
Manual
247 718
247 721
247 722
247 723
247 724
247 725
238 642
238 643
238 638
238 639
Dispensing gun XDV20 ½“ inlet and 7/8 “ outlet tube and tip, motor oil and anti freeze
Dispensing gun XDV20 ½“ inlet and 7/8 “ outlet hose and tip, motor oil and anti freeze
Dispensing gun XDV20 ¾“ inlet and 7/8 “ outlet tube and tip, motor oil and anti freeze
Dispensing gun XDV20 ¾“ inlet and 7/8 “ outlet hose and tip, motor oil and anti freeze
Dispensing gun XDV20 ½“ inlet and 7/8 “ outlet bare (without outlet tube or tip)
Dispensing gun XDV20 ¾“ inlet and 7/8 “ outlet bare (without outlet tube or tip)
Manual flow meter EM 12, ½″ Eingang, Auslaß ½″ Rohr, Düse 15,0 mm
Manual flow meter EM 12, ½″ Eingang, Auslaß ½″ Schlauch, Düse 15,0 mm
Manual flow meter EM 12, ¾″ Eingang, Auslaß ½″ Rohr, Düse 15,0 mm
Manual flow meter EM 12, ¾″ Eingang, Auslaß ½″ Schlauch, Düse 15,0 mm
LDM 5 = flow meter
LDP 5 = flow meter „adjustable“
255 751
Manual flow meter LDM 5 electr. 9 Volt, inlet ½″, ⅜″ hose, max 18,9 L/min, 69 bar
255 277
Manual flow meter LDP 5 electr. 9 Volt, inlet ½″, ⅜″ hose, max 18,9 L/min, 69 bar
256 215
Manual flow meter LDM 5 electr. 9 Volt, inlet ½″,, ⅜″ ″ tube, 75° elbow, max 18,9 L/min, 69 bar
Manual flow meter LDP 5 electr. 9 Volt, inlet ½″,, ⅜″ ″ tube, 75° elbow, max 18,9 L/min, 69 bar
256 216
244 076
Flow meter IM6, electr. max 45,4 L/min, max 103 bar
239 824
Flow meter IM5 electr., 9 Volt, max 34 bar max 18,9 L/min
Tube extension, fits: 1:1 Fast-Ball, 5:1/10:1 Fire-Ball
191 126
Tube extension, 1 ½ NPT(A), ca. 362 mm, order sep. 110 127 foot piece, 110 mm, 60 l/16 gallon coverm.
191 128
Tube extension, 1 ½ NPT(A), ca. 553 mm, order sep. 110 127 foot piece, 110 mm, 200 l/ coverm.
191 130
Tube extension, 1 ½ NPT(A), ca. 660 mm, order sep. 110 127 foot piece, 110 mm, 200 l/, bung
191 131
Tube extension, 1 ½ NPT(A), ca. 914 mm, order sep. 110 127 foot piece, 110 mm, 1.040 l/, bung
203 688
Float valve and ball drum valve with 1 ½″ NPT internal thread fits suction tube
110 218
Hand lubricator, also cartridge use
200 325
Hydraulic coupling
200 389
Tube with hydraulic coupling
204 072
Tube 153 mm with 360° lockable pivot and hydraulic coupling, ⅛″ NPT(A)
109 145
Hose, Buna-N 30 cm with handle, without hydraulic coupling, ⅛″ NPT(A)
204 204
Hose, 30 cm with handle, hydraulic coupling and 15° angled tube 6 cm long, ⅛″ NPT(A)
112 255
Hose, 45 cm with handle, without hydraulic coupling, ⅛″ NPT(A)
203 504
Hose, 30 cm, hydraulic coupling and lock sleeve connector to quickly connect gun coupling
┼154 289
Hose, inside nylon, 30 cm without coupling/handle, both sides ⅛“ NPT(A)
109 148
Hose, Buna-N 70 cm with handle, without hydraulic coupling, ⅛″ NPT(A)
205 532
Hydraulic adapter – steel tips
205 582
Hydraulic adapter – nylon tips
201 881
Hydraulic adapter – steel (insert on external grease fittings)
┼ 236 171 Filler fitting hand lubricator
237 020
Hose reel, bare, max 124 bar
Hose reel, bare, max 552 bar, series 350, for other hose reels see manual
237 030
237 032
Hose reel (grease), ¼″, 15 m hose, 350 bar
237 022
Hose reel (oil) ½″ I.D., ½″NPT(A), 15 m hose, 124 bar
238 213
Hose reel (air, water) ⅜″ I.D., ⅜″NPT(A) x ½″NPT(A), 18 m hose, 12.5 bar, shaft SST
233 933
Accu-Shot manual flow rate meter electronic, 2 x 1.5 Volt battery for greases, max 345 bar
┼ 200 020 Lock sleeve connector for 16mm ø flat head grease fitting
┼ 200 021 Lock sleeve connector (giant) for 22mm ø flat head grease fitting
┼ not shown.
09/01/09
19 - 2
312 789
308 642
312 668
307 965
308 687
309 868
306 708
306 708
306 708
308 306
308 400
309 454
306 708
DRUM COVERS AND FOLLOWER PLATES
Drum covers 200 litre
(55 gall. barrel)
200 326
238 283
238 008
(Ø628.65mm)
Drum
covers with
holder
237 949
237 306
(Ø628.65mm)
(Ø628.65mm)
(Ø628.65mm)
204 269
206 586
237 307
237 308
237 309
237 310
(Ø628.65mm)
(Ø628.65mm)
(Ø628.65mm)
(Ø628.65mm)
Drum covers 19 litre
(5 gall. barrel)
Drum cover 60 litre
(16 gall. barrel)
1½” adapter
190 737
O-ring
109 458
Order
separately
2” adapter
190 166
Collar ring
194 152
from 89.3 to 64.58mm
O-ring
160 721
222 058
222 059
205 342
(Ø309mm)
(309mm)
(Ø309mm)
Follower plates elevators
and RAMS
204 574
(Ø384mm)
165 094
204 351
206 747
(Ø289mm)
(Ø289mm)
160 754
222 909
C58 391
237 702
186 558
237 524
204 405
223 845
223 846
223 701
241 081
222 812
235 516
C50 010
191 991
C03 064
6789 048
112 924
05/08/0816:29
237 571
206 258
220 653
220 654
223 700
204 353
205 699
918 408
626 253
20-1
918 305
DRUM COVER AND FOLLOWER PLATES
Part No.
Name
307/310
Lid
222 059
222 058
240 212
221 095
205 342
204 574
204 269
5 gallons/19 l cover I.D. 309 mm, with clamp for 50:1 Fireball, Eagle pumps
5 gallons/19 l cover I.D. 309 mm, for 3:1, 5:1 oil pumps
5 gallons/19 l cover, stainless steel with clamping screws and opening for agitator (Husky 307)
5 gallon cover for Husky 515/716 with agitator opening, siphon hose and fastenings
5 gall. cover bare without screws for agitator and siphon hose
16 gallons/120 lb US version - 60 l (ID 384 mm)
16 gallons/120 lb cover with brackets
200 326
206 586
237 306
237 307
237 308
237 309
237 310
237 949
238 283
238 008
112 924
200 kg (400 lb) drum, closed cover, normal steel 15/50:1 FB, 50/75:1 Pres., 5:1 Mon
200 kg (400 lb) drum, closed, normal steel with bracket
200 l drum, stainless steel, 1:1 Fast-Flo, 5:1 Monark, 10:1 President
200 l drum, stainless steel, 1.5:1 Monark, ¾:1 President
200 l drum, stainless steel, 30:1 President, opening for agitator and filter
200 l drum, stainless steel, Bulldog, King, for agitator 205 715
200 l drum, stainless steel, 2:1 standard for agitator 204 995, 206 219
200 l drum, stainless steel, glutton pump
200 l drum, stainless steel, only agitator 238 157
200 l drum, stainless steel, without openings for pumps or agitators
Drum cover seal EPDM, is placed on top on the drum’s border on top of the drum
220 653
220 654
223 845
223 344
223 846
223 700
223 701
25-35 lb pot, 50:1 Fire-Ball, Ø 285.7 mm
120 lb drum, 15:1 and 50:1 Fire-Ball, Ø 375 mm
200 kg drum, 15:1 and 50:1 Fire-Ball, Ø 594 mm, pump hose Ø 31.8 mm
120 lb drum, 50:1 President
200 kg drum, 50:1 President, Ø 594 mm, pump hose Ø 41.3 mm
120 lb drum, 5:1 Dynastar, Ø 375 mm, 10:1 Fire-Ball 425, pump hose Ø 53.9 mm
200 kg drum, 5:1 Dynastar, Ø 594 mm, 10:1 Fire-Ball 425, pump hose Ø 53.9 mm
222 812
918 409
235 516
222 909
237 702
241 081
194 152
C58 391
918 408
220 653
C50 010
204 351
204 353
205 699
204 405
191 991
C56136
918 305
238 929
241 251
15B 114
5 gallons, C-M pumps 200/450, outer Ø 289 mm, wiper ring and distance ring, collar Ø 64.58 and
5 gallons, same as 222 812 but with 45° elbow and ball valve
5 gallons, same as 222 812 but with check valve and wiper lip PTFE coated
5 gallons, same as 222 812 but made of stainless steel
5 gallons Check-Mate 800/1000, outer Ø 289 mm, wiper ring and distance ring, collar Ø 89.3 mm
EEC Hobbock, CM 800/1000 outer Ø 330 mm, wiper ring and distance ring, collar Ø 89.3 mm
Adapter I.D. Ø 64.58, O.D. Ø 88.8 mm for adapting to plate 237-702/241-081 CM 200/450
5 gall. Check-Mate 800/1000, O.D. 294 mm with wiper ring hose blue, collar Ø 89.3 mm
5 gall. Check-Mate 800/1000, O.D. 263 mm without wiper ring hose, collar Ø 89.3 mm
5 Gallons, 20/25:1 Bull, 55:1 King, collar Ø 68.28 mm outer 289 mm (lip)
5 gall. External Ø 289 mm wiper ring and distancing ring, ⅛″ check valve, collar Ø 68.35 mm
22.7 kg 50:1 Fire-Ball, Ø 289 mm (manual elevator)
200 kg, 50:1 Fire-Ball (pneumatic elevator)
200 kg, 50:1 President (pneumatic elevator)
200 kg, 5:1 Monark, 10:1 President, collar Ø 56.41 mm
Follower plate, bare for RAM 200 litre, 207 279, 3″, 233 087, 6.5″ and 918 420, 6.5″ hydraulic
Follower plate bare for 200 litre PTFE coated
Follower plate with check valve, ¼″ air hose, 2.4 m, prime valve without wiper rings
Follower plate for 200 l RAM with ethylene propylene hose wiper ring (EPDM)
Follower plate for 200 l RAM with PVC hose wiper ring
Follower plate, stainl. steel for 200 l stainl. steel RAM with inflatable wiper ring, Ø 571 mm drum
307 878
307 879
308 822
307 857
306 670
306 345
306 345
Drum Covers
307 879
306 345
308 466
308 466
308 466
308 466
308 466
308 466
308 466
308 466
Follow Plate
306 345
306 345
306 345
306 345
306 345
306 345
306 345
Follower plate, elevator and RAMs
308 049
310 526
308 049
308 049
310 526
310 526
306 838
307 878
306 556
306 556
306 934
306 934
310 524
306 934
310 524
309 549
Wiper ring
184 420
184 552
C03 064
918 312
C03 059
C03 228
918 241
6789 048
165 601
236 726
C31 007
237 571
206 258
237 524
160 754
186 558
165 094
626 253
5 gall. wiper ring for 222 812, 237 702
5 gall. wiper ring PTFE coated for 222 909
5 gall. wiper ring (PVC hose blue with screw clamp) for 918 408
Wiper ring kit 200 l RAM (EPDM hose with steel band)
Wiper ring kit 200 l RAM (PVC hose with steel band)
Wiper ring kit 200 l RAM (neoprene SBR hose with steel band)
Wiper ring kit 300 gallons (1145l) RAM (rubber hose with steel band)
Wiper ring, PVC, Ø 40 mm, Ø 571 mm drum (closed ring)
Wiper ring, white neoprene, food quality, drum Ø 568 to 575 mm
Wiper ring kit, per individual “T” lips, (two rings) for RAM 207 279, max 66°C
Wiper ring kit, two silicon hoses incl. clamps hot melt max 204°C
Adapter plate, stainless steel, for siphon hose or 2” bunghole pump (3 fixing holes)
Adapter plate, normal steel, cover 237 306 or 237 307 (3 fixing holes)
Hand grip kit
Adapter plate, aluminium casting, 2” orifice (2 or 4 fixing holes)
Adapter plate, SST, 2:1 standard 5 gall. 2″ with 2 x 7.9 mm Ø, equipped for Twistork with 4x 10 mm
Distancing ring, 254 mm high O.D. 144 mm. For Fireball, to balance out drum heights
Adapter I.D.5([0-9].[0-9]) mm, O.D. 6([0-9].[0-9]) mm. In order to use pumps with 56 ∅ foot valve e.g. in 222-812
05/08/2008 16:29
20-2
308 049
308 049
310 526
310 524
310 524
310 524
306 934
306 934
309 196
308 466
308 466
308 466
308 211
AIR MOTORS & HYDRAULIC MOTORS
Part No.
Name
Notes
Repair kit
223 099
204 464
204 722
223 953
241 505
246 775
203 876
206 405
239 877
237 526
238 108
205 626
206 955
222 791
205 997
215 363
207 546
215 354
241 953
Fast-Flo
Transfer
For 204 456, 226 040,
208 117, 223 954,
214 584
10.00
101
10.00
101
Standard
10.00
101
10.00
76
Falcon II
20:1 Falcon
241 834*
42.6
57
Fire-Ball 225
3:1 Inline incl. lower
246 918
25.6
57
Fire-Ball 300
238 286
45
76.2
Fire-Ball 300
15:1 Inline air motor
206 728
45
76.2
Fire-Ball 300
206 728
45
76.2
Fire-Ball 425
207 385
90
102
Fire-Ball 425
207 385
90
102
Fire-Ball 425
238 751
90
102
2 rods, 1.5:1, 2:1
206 728
45
76.2
3 rods 23:1, DB and CM
206 728
45
76.2
Monark
3 rods 5:1, 15:1
206 728
45
76.2
10:1 Monark
206 728
45
76.2
Sanitary
206 728
45
76.2
Muffler for Monark air motor (not for Inline & Sanitary)
Muffler/discharge plates refitting kit (for more recent pumps standard 92 to 75 dBA)
307 456/977
307 851
307 851
307 851
308 995
309 869
309 869
306 531
308 883
309 869
309 869
309 869
307 043
307 043
307 043
307 043
307 043
307 361
205 647
206 078
205 038
207 352
210 007
222 772
241 265
Inline 9/10:1
207 385
90
102
102
Inline 45/50:1
207 385
90
2 connection rods
207 385
90
102
3 connection rods
207 385
90
102
Presidents
2 connection rods SST
207 385
90
102
90
102
Check Mate
207 385
Adjust-A-Stroke (stroke
207 385
90
adjustment)
Outlet plate kit connection possible for external air evacuation
Presidents
Outlet plate muffler kit for HF President, ¾:1 Pres. 2 balls & 30:1 Pres.
Red. by approx 20 dBA
Muffler for President air motor
306 982
306 982
306 982
306 982
307 157
306 982
308 952
243 801
243 421
214 873
Standard
Quiet
Sanitary Electronickel
Piston
area cm²
Stroke
length
Manual
309 152
309 094
307 361
217 540
220 571
624 250
Senator
218 122
220 916
218 122
158
158
158
120.6
120.6
120.6
307 592
307 592
307 592
208 356
625 794
215 255
237 001
233 077
210 302
208 804
Standard
206 734
Sanitary Electronickel
206 734
Bulldogs
Quiet
215 906
Quiet unit icing
215 906
External air evacuation
215 906
(Obsolete)
Adjust a Stroke
206 734
Muffler for Bulldog/King motor encapsulated in hood
249
249
249
249
249
249
120.6
120.6
120.6
120.6
120.6
120.6
307 049
307 049
307 304
307 304
307 304
307 050
307 104
245 111
220 106
235 525
245 112
Kings
Standard
Quiet
External air evacuation
Quiet unit icing
506
506
506
506
120.6
120.6
120.6
120.6
309 347
309 348
309 348
309 348
222 800
239 003
Premier
Casing kit
222 958*
800
Refitting kit air motor casing Premier – plastic
120.6
308 213
308 689
6720 038
217 222
236 417
Viscount I
2 connection rods
Motor block
3 connection rods
218 210
218 210
236 698
9.55
9.55
9.55
101
101
101
307 654
308 330
217 022
217 338
235 345
223 646
Viscount II
GH units
2 components
Standard motor
Quiet
220 457
220 457
223 654
223 654
31.6
31.6
31.6
31.6
119
119
119
119
307 158
307 158
307 158
308 048
207 730
207 730
207 730
207 730
* = without air control valve
09/12/08
21 – 1
LOWER PUMPS – BALL TYPE
Part No.
241 516
237 140
218 746
237 199
223 177
224 341
15G 976
224 344
224 349
220 465
222 173
223 587
223 842
223 595
239 145
240 444
239 835
239 838
15D 787
240 606
240 607
239 834
239 837
240 608
240 609
239 833
239 836
686 679
239 860
239 859
240 610
240 611
240 612
240 613
217 529
206 184
243 731
243 734
248 329
243 771
243 736
248 331
243 773
243 732
243 735
248 330
243 772
210 208
206 453
206 452
222 801
222 803
237 514
236 470
236 456
236 458
241 177
217 403
222 796
222 805
687 055
241 956
236 478
Name
Stand repair kit
1:1 Fast-Flo, CS and SS, leather
1:1 Fast-Flo, CS and SS, UHMWPE
1:1 Fast-Flo, CS and SS, PTFE
1:1 Fast-Flo, CS and SS rubber
10:1/20:1 Falcon
1,5:1 Monark, 3:1 President DB, Leather
1,5:1 Monark, 3:1 President DB, stainless steel, UHMWPE/leather
1,5:1 Monark, 3:1 President DB, stainless steel, PTFE
2:1 Monark, 4:1 President DB, UHMWPE/leather
2:1 Monark, 4:1 President DB, Leather
2:1 Monark, 4:1 President DB, leather/PTFE
5:1 Monark, 10:1 President, short, stainless steel, UHMWPE/PTFE
5:1 Monark, 10:1 President, short, stainless steel, PTFE
5:1 Monark, 10:1 President, short, stainless steel, neoprene
5:1 Monark, 10:1 President, 200 l bung, stainless steel, UHMWPE/PTFE
5:1 Monark, 10:1 President, 200 l bung, PTFE
5:1 Monark, 10:1 President, mining pump
15:1 Monark, 30:1 President DB, leather 1x PTFE, normal steel glands
15:1 Monark, 30:1 President DB, leather/PTFE mixed, stainless steel glands
15:1 Monark, 30:1 President DB, PTFE, stainless steel glands
15:1 Monark, 30:1 President, stainless steel, UHMWPE/leather
23:1 Monark, DB, leather 1x PTFE, normal steel glands
23:1 Monark, DB, leather 1x PTFE, stainless steel glands
23:1 Monark DB, 46:1 President DB, leather/PTFE mixed, stainless steel glands
23:1 Monark DB, 46:1 President DB, stainless steel, PTFE
1,5:1 President, 4:1 Bulldog, ″4 ball″ HF
1,5:1 President, 4:1 Bulldog, ″4 ball″ HF, stainless steel
4:1 Bulldog, ″4 ball″ HF, stainless steel, ceramic
1,5:1 President, 4:1 Bulldog, ″4 ball″ HF, stainless steel with Tri-Clamp adapter
1,5:1 President, 4:1 Bulldog, ″4 ball″ HF, SST, inlet 1½″ BSP(I), outlet 1¼″ BSP(I)
2:1 President, ″4 bar″ HF, Viscount
2:1 President, ″4 bar″ HF, stainless steel, Viscount
2:1 President, ″4 ball″ HF, stainless steel with Tri-Clamp adapter
2:1 President, ″4 bar″ HF, stainless steel, inlet 1½″ BSP(I), outlet 1¼″ BSP(I)
3:1 President/Viscount 300, ″4 ball″ HF
3:1 President/Viscount 300, ″4 ball″ HF, stainless steel
3:1 President/Viscount 300, ″4 ball″ HF, stainless steel, ceramic
3:1 President/Viscount 300, ″4 ball″ HF, PTFE
3:1 President/Viscount 300, ″4 ball″ HF, stainless steel, PTFE
3:1 President, ″4 ball″ HF, stainless steel with Tri-Clamp adapter
3:1 President, ″4 bar″ HF, stainless steel, inlet 1½″ BSP(I), outlet 1¼″ BSP(I)
3:1 President, ″4 ball″ HF, stainless steel, PTFE with Tri-Clamp adapter
3:1 President, ″4 bar″ HF, stainl. steel, PTFE, inlet 1½″ BSP(I), outlet 1¼″ BSP(I)
15:1 President DB, leather/PTFE
28:1 President DB, stainless steel/PTFE
3:1 Bulldog, 6:1 King, Viscount II 600 ″4 ball″ HF
3:1 Bulldog, 6:1 King, Viscount II 600 stainless steel, ″4 ball″ HF, 2 BSP(I)
3:1 Bulldog, 6:1 King, Viscount II 600 stainless steel, ″4 ball″ HF, 2 BSP(I), Cr
3:1 Bulldog, 6:1 King, Viscount II 600 stainless steel, ″4 ball″ HF, 2” NPT(I)
3:1 King, Viscount II 300, stainless steel, ″4 ball″ HF, 2″ BSP(I)
3:1 King, Viscount II 300, stainless steel, ″4 ball″ HF, 2″ BSP(I), Cr
3:1 King, Viscount II 300, stainless steel, ″4 ball″ HF, 2″ NPT(I)
4:1 King, Viscount II 400, ″4 ball″ HF, 2″ NPT(I)
4:1 King, Viscount II 400, stainless steel, ″4 ball″ HF, 2″ BSP(I)
4:1 King, Viscount II 400, stainless steel, ″4 ball″ HF, 2″ BSP(I), Cr
4:1 King, Viscount II 400, stainless steel, ″4 ball″ HF, 2″ NPT(I)
5:1 Bulldog DB, 10:1 King/Viscount II 1000
5:1 Bulldog, stainless steel, PTFE DB
5:1 Bulldog, stainless steel, rubber DB
10:1 Bulldog, 20:1 King, 34:1 Premier, Dura-Flo 2400
10:1 Bulldog, 20:1 King, 34:1 Premier, Dura-Flo 2400, stainless steel
21:1 Bulldog, Dura-Flo 1200, stainless steel, leather
28:1 Bulldog, 56:1 King, Dura-Flo 900, stainless steel, leather
33:1 Bulldog, 68:1 King, Dura-Flo 750, stainless steel, leather
41:1 Bulldog, Dura-Flo 600, stainless steel, leather
41:1 Bulldog, Dura-Flo 600, stainless steel, PTFE/UHMWPE
60:1 Bulldog
28:1 King, 45:1 Premier, Dura-Flo 1800
28:1 King, 45:1 Premier, Dura-Flo 1800, stainless steel
28: 1 King, Dura-Flo 1800, SST, 3 x UHMWPE/2 x PTFE graphite, Hydra-Clean
28: 1 King, Viscount II, Dura-Flo 1800, stainless steel, ceramic, UHMWPE/PTFE
45:1 King, CS, leather
(224 435)
45:1 King, stainless steel, leather
(223 841)
63:1 King, CS, leather
(224 545)
63:1 King, stainless steel, leather
(223 600)
68:1 King, Dura Flo 750, leather
74:1 King, Dura Flo 1100, leather
* = without throat seal
Cr = Chromed piston rod
09/12/08
21 – 2
213 012
215 964
213 013
218 112
241 597
237 198
220 927
237 200
223 320
237 193
237 194
224 401
224 889
224 402
224 403
208 520
224 902
206 733
235 635
237 725
223 675
218 135
239 328
235 636
236 724
220 587*
220 587*
220 587*
220 587*
220 587*
220 588*
220 588*
220 589*
220 589*
220 589*
220 589*
220 589*
224 934*
224 934*
220 589*
220 589*
224 934*
224 934*
235 634
307/308
307 427
307 427
307 427
307 427
308 996
307 652
307 652
307 652
307 983
307 983
307 983
308 116
308 116
308 117
308 118
307 044
307 962
306 981
306 981
308 106
306 981
307 619
307 619
307 619
307 619
308 793
308 793
308 793
306 936
306 769
243 727*
309 136
(309 130)
243 729*
309 136
243 728*
309 136
223 439
207 349
206 931
222 879
222 875
237 178
237 172
237 240
237 234
237 609
218 040
222 849
222 845
−
222 845
224 438
223 643
224 433
223 658
238 117
237 166
308 043
306 818
306 818
308 151
308 152
308 360
308 354
308 418
308 350
308 350
307 647
308 147
308 148
308 148
308 148
307 728
308 107
307 663
308 417
308 357
XTREME LOWER PUMPS WITH INTEGRATED FILTERS
Part No.
Delivery per
cycle
Surface
244 411
244 413
244 415
244 417
244 419
145 cm³
6 cm²
180 cm³
7.5 cm²
220 cm³
9.0 cm²
250 cm³
10.45 cm²
290 cm³
12 cm²
Pressure
ratio
80:1 King,
41:1 Bulldog
68:1 King,
33:1 Bulldog
56:1 King,
28:1 Bulldog
45:1 King,
24:1 Bulldog
13:1 Senator,
21:1 Bulldog
Seal repair
kit
PE leather
244 850
Standard
244 851
Standard
244 852
Standard
244 853
Standard
244 854
Standard
Alternative
Leather /
1XTuffst.
246 833
246 835
Alternative
Tuff Stack
repair kit
Pump rod
Plasma Coat
(Standard)
Hard
chromed
Instruction
manual
244 900
197 320
198 414
309 340
244 901
197 321
198 415
309 340
244 902
197 322
198 416
309 340
244 903
197 323
198 417
309 340
244 904
197 324
198 418
309 340
244 900
197 320
198 414
309 340
244 901
197 321
198 415
309 340
244 902
197 322
198 416
309 340
244 903
197 323
198 417
309 340
244 904
197 324
198 418
309 340
197 320
198 414
309 340
197 321
198 415
309 340
197 322
198 416
309 340
197 323
198 417
309 340
197 320
198 414
309 340
197 321
198 415
309 340
197 322
198 416
309 340
197 323
198 417
309 340
197 324
198 418
309 340
Stand repair kit
307/308
XTREME LOWER PUMPS WITHOUT FILTER
244 410
244 412
244 414
244 416
244 418
145 cm³
6 cm²
180 cm³
7.5 cm²
220 cm³
9.0 cm²
250 cm³
10.45 cm²
290 cm³
12 cm²
80:1 King,
41:1 Bulldog
68:1 King,
33:1 Bulldog
56:1 King,
28:1 Bulldog
45:1 King,
24:1 Bulldog
67:1 Premier,
21:1 Bulldog
244 850
Standard
244 851
Standard
244 852
Standard
244 853
Standard
244 854
Standard
246 833
246 835
XTREME LOWER PUMPS WITH INTEGRATED FILTER (Tuffstack)
249 270
249 271
249 272
249 273
145 cm³
6 cm²
180 cm³
7.5 cm²
220 cm³
9.0 cm²
250 cm³
10.45 cm²
80:1 King,
41:1 Bulldog
68:1 King,
33:1 Bulldog
56:1 King,
28:1 Bulldog
45:1 King,
24:1 Bulldog
−
−
−
−
−
−
−
−
244 900
Standard
244 901
Standard
244 902
Standard
244 903
Standard
XTREME LOWER PUMPS FOR 2K SYSTEMS WITHOUT FILTER (Tuffstack, Hydracats)
244 420
244 421
244 422
244 423
244 424
145 cm³
6 cm²
180 cm³
7.5 cm²
220 cm³
9.0 cm²
250 cm³
10.45 cm²
290 cm³
12 cm²
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
244 900
Standard
244 901
Standard
244 902
Standard
244 903
Standard
244 904
Standard
LOWER PUMPS – CHECK-MATE PRIMING PISTON
Part No.
Name
222 790
246 932
235 540
237 206
237 450
222 771
222 814
237 202
222 810
246 934
222 811
236 611
246 939
236 612
222 954
236 613
237 795
237 885
253 141
10:1 Monark, 20:1 President, 55:1 Bulldog Check-Mate 450
10:1 President CheckMate, UHMWPE−Tuff Stack
10:1 Monark, 20:1 President, 55:1 Bulldog Check-Mate 450, PTFE
20:1 President Check-Mate 450, short with ⅝″ – UNC –2A on the piston rod
34:1 Senator, 55:1 Bulldog, short, with ¾″ NPT(I) outlet and larger oil cup
23:1 Monark, 46:1 President, Check-Mate 200
23:1 Monark, 46:1 President, Check-Mate 200, stainless steel
46:1 President, Check-Mate 200, short
12:1 Bulldog, 24:1 King, 39:1 Premier, Check-Mate 2100, PE/PTFE
12:1 Bulldog, 24:1 King, 39:1 Premier, Check-Mate 2100, PE/PTFE–Tuff Stack
12:1 Bulldog, 24:1 King, 39:1 Premier, Check-Mate 2100, stainless steel
31:1 Bulldog, 65:1 King, Check-Mate 800
31:1 Bulldog, 65:1 King, 19:1 Senator Check-Mate 800 (inks)
31:1 Bulldog, 65:1 King, Check-Mate 800, stainless steel
50:1 King, 80:1 Premier, Check-Mate 1000
50:1 King, 80:1 Premier, Check-Mate 1000, stainless steel
Check-Mate 800, 200l Hot-Melt (237 896)
Check-Mate 800, 5 Gall. Hot-Melt (237 897)
Check-Mate 800, 200l Hot-Melt, graphite filled PTFE, designed with grease chamber
222 773*
234 422
222 773* and †
222 773*
222 773*
222 784*
222 972*
222 784*
222 860
234 419
222 860
222 864
241 782 throat seal
222 866
222 869
222 871
253 545 throat seal
* = without throat seal
† = Order PTFE piston packing 188 257 and inlet valve packing 189 217 separately, see manual 308 017
Note: When processing polysulfide with Check-Mate pump, an alternative is to replace the throat seal with the
“Tuff Stack”
Packing kit 244 857 (contains 10 V packs) for Check-Mate 450
Packing kit 244 861 (contains 10 V packs) for Check-Mate 1000
Packing kit 234 422 (contains 3xUHMWPE, 2xTuff Stack) for Check-Mate 450
308 017
09/12/08
21 – 3
308 017
308 017
308 080
308 200
308 080
308 149
308 149
308 150
308 351
308 351
308 352
308 355
308 356
308 570
308 570
308 570
LUBRICANTS
Part No.
Name
306/308
206 994
239 049
206 995
206 997
206 996
206 998
288 166
TSL liquid 0.24 litre for pump throat packing. Not for air motors!
TSL liquid, one box a. 12 x 206 994
TSL liquid 0.95 litre
TSL liquid, one box a. 12 x 206 995 = 12 quarts = 11.4 l
TSL liquid 3.8 litre
TSL liquid, one box a. 4 x 206 996 = 15.14 l
TSL liquid 6X 0.95 litre (old TSL)
TSL liquid, dissolves or retards curing of material on displacements rods
307 765
218 797
207 428
169 236
Hydraulic oil 0.95l for PT2500
Hydraulic oil 3.785 litres for EH 333, EH 433, GH, Hydra-Max, etc.
Hydraulic oil 19 litres for Viscount
308 166
307 766
307 766
202 659
6789257
Air motor oil 473 cm³ (US 1 pint) for agitators etc.
Kilfrost 1 litre (de-icer)
217 374
218 656
106 565
ISO pumps – oil 473 ml (US – 1 pint)
ISO pumps – oil 15.14 litres (4 x 1 gallons)
ISO pumps – grease 430 cm³ cartridge
(073 004)
307 764
(073 020)
(070 420)
111 920
118 665
117 773
551 189
111 265
110 293
115 982
Tube grease 10.6 gram lithium base for Husky air valve
(070 272)
Tube grease 118 gram lithium base for Fusion gun
(070 272)
Grease cartridge 88 gram for Fusion gun (food grade) (gun 117 792)
Grease gun incl. additional 1 cartridge, 88 gram cartridge (115 982)
Tube clear grease 113 gram silicone-free, also for Sanitary
(070 302)
Can 208 ml gear grease NLGI class I
(070 386)
Tube 88 gram synthetic grease, silicon-free, dropping point 240°C, NLG class 2, red (070
303)
116 553
Tube grease, dielectric 1 OZ =28.25 gr. (E-static)
(070 521)
253 574
Anti-corrosion agent (armour) for pumps 1 litre
245 133
Anti-corrosion agent (armour) for pumps 3.8 litre (1 gallon)
70950003001
Tube white grease paste OKS 270, 100 g, silicon-free, fully waterproof
117 784
Synthetic oil for G-Force 2525 LD and 2626 LD water pump, water pump, 4.5 fl. oz, 133
cm³
246 377
Oil for all G-Force pumps with exception of 118122 (G-Force 2525LD and 2626LD)
110 009
C07 664
Heat-conducting white paste (silicon free) 30 gr
Heat-conducting white paste (silicon free) 120 gr
206 994
206 995
206 996
202 659
106 565
70950003001
09/12/08
551 189
(117 792)
21 – 4
307 767
307 763
308 177
307 972
MSD 020
309 031
309 124
MSD 029
6000 370
309 828
TOOLS
Allen Keys
114 141 1/16″ = 1.587 mm
101 369 3/32″ = 2.381 mm
110 890 7/64″ = 2.778 mm
101 690 1/8″ = 3.175 mm
101 690 1/8″ = 3.175 mm
101 821 3/16″ = 4.763 mm
101 976 ¼″ = 6.35 mm
Ball-end hexagon socket
112 080 2.0 mm
107 460 4.0 mm
Hand socket wrench
101 821 3/16″
Allen key
106 571
106 571 –5/16“ 2.381 mm
106 572 3/16″ 4.762 mm
15A 724 Spring pin (Rep. Merkur pump)
171 147
Universal gun key
102 176 Cross key
197 448
Key, HVLP guns
70620 100003 Jointed cross key for Ø 35 – 60, (d-Ø 5 mm)
70620 100004 Jointed cross key for Ø 60 – 90, (d-Ø 6 mm)
101 891 Round brush, nylon, Ø 9 mm
101 892 Rund brush, nylon, Ø 15.9 mm
105 749 Cleaning brush, metal
with 9 mm longen white fibres
M70 612 Tool kit for
HVLP gun series 960/980
(Rep.Merkur pump)
191 744 Multifunction key
for Pro 3500, 4500 & 5500
276 741 Multifunction key
for Pro Xs2, Xs3, Xs4 & Auto Xs
Thickness gauge
25 – 500 Mµ,(ES-1.4301)
70783 001001
117 661 Pen reversible chuck with
adjustable sizes on both sides up to
3.1 mm
15C 162
Gun cleaning kit HVLP contains: round
brushes, 1 ea 1.8/2.5/3.2/4.0/4.7/6.7/13.5 mmØ
Pin chuck, incl. 1 x 5 mm & 1 x 6.5 mm brush
Pin chuck, incl. 6 ea 0.5 mm Ø wire chucks
09/12/08
Tip cleaning needle kit
75143 010002
No. 00, Ø 08
098017
No. 1, Ø 158
6711 181
No. 10, Ø 10
75143 010006
No. 4, Ø 30
15C 161 Gun cleaning kit contains:
Round brushes 1 ea 1.8/2.5/3.2/4.0/4.7/6.5/9.5/22-32 mm Ø
Round brush, metal 10 mm Ø, round brush, plastic 10 mm Ø.
Pin chuck incl. 1 x 5 mm & 1 x 6.5 mm Ø brush
Pin chuck incl. 3 x 0.3 mm & 6 x 0.5 mm Ø wire chucks
Brush 31 mm wide, plastic B
Brush plastic hair, brush metal wire. One O-ring lifter.
21 – 5
TOOLS
176 881 Key, size 38, 46 mm
Package nut, Hydra-Cat
Hook key for package nut
184 119 Check-Mate 200/450 small wet-cup
112 887 Dura-Flo 600/750/900
Check-Mate 800/1000 & Check-Mate 450
With large wet-cup
184 278 Dura-Flo 1800/2400 & Check-Mate 2100
168 092 Steel band pliers
(use 200 LRAM)
168 513 Assembly gauge
For correct assembly of air distributors
For Senator, Bulldog & King air motors
207 579 Pliers
To hold the control bar on the air motor
in a protected manner: Fire-Ball, Monark,
President, Senator, Bulldog and King
171 818 Gauge
To measure the valve play between the inlet valve and piston on
Fire-Ball, Monark and President air motors
Piston rod
110 335 Key, size 44.7mm
Package nut, “mid range”
HF – pump
220 385 Tool kit
To hold the piston rod on HF
piston pumps in a protected
manner 309 136
189 780 Assembly key
Round pattern kit
ProXs4 AA & Auto Xs AA
09/12/08
21 – 6
AIR, GAS AND FLUID HOSES
(Recommended application areas)
Collar
Connector
Earthing wire
Core
Insert
Top cover
Elastomer
Buna-N (NBR)
•
•
•
•
Resistant to petroleum products
Abrasion-proof
Can be used for: water, air, oils, silicone greases, ethylene and synthetic lubricants
Can not be used for: brake and hydraulic fluid, ketones and concentrated acids
Buna-S (SBR)
•
•
•
•
Resistant to non-petroleum products
Robust and abrasion-proof
Can be used for: water, air, brake and hydraulic fluid and alcohols
Cannot be used for: petroleum products, concentrated chemicals and ozone
Neoprene (CR)
•
•
•
•
Resistant to weather and temperature influences
Extremely robust, elastic and abrasion-proof
Can be used for: petroleum products, silicone grease, freon and weak acids
Cannot be used for: ketones and phosphate fluids
Polyamide (PA)
Nylon®*
•
•
•
•
Especially robust, abrasion-proof and temperature stable
Neutral and resistant to most chemicals, rapid solvents and petroleum products
Can be used for: ketones and ethers, fatty acids, aromatic hydrocarbons, alkaline media and esters
Cannot be used for: concentrated acids and oxidising liquids
Polytetrafluorethylene (PTFE)
• Especially robust and resistant to any wear
• Best resistance against chemicals and temperature effects
• Completely absorption-proof
• Can be used for: corrosive media and concentrated acids, rapid solvents, steam, food and pharmaceutical
products
• Cannot be used for: fluorine
The correct choice of hose
1.
2.
3.
4.
Using the “Raw Hose Specification" table, determine the required raw hose part no. taking into account the
inner diameter, working pressure and fluid properties.
The already specified raw hose part no. should be looked up in the “Sheathed Hose Lengths” below.
Now identify the corresponding part no. from the connection dimensions and hose length.
Other hose lengths, as well as raw hoses together with the corresponding fittings can be supplied on request.
* Designations are registered trademarks.
21/01/09
22 – 1
LOW PRESSURE HOSES (AIR, GAS & WATER)
Air hoses for electrostatic, see Chapter 8-6 (electrostatic accessories)
Neoprene
(SBR)
Raw hose
Part No.
Bruna-S
(SBR)
Bruna-N
(NBR)
Dimensions
mm (in.)
ID
054 753
054 754
054 757
598 095
054 118
054 130
C12,509
C12,508
Oper
ating
pres
sure
bar
17.2
17.2
17.2
17.5
8.0
8.6
17.2
17.2
054 760
8.6
8.33
12.7
-
061 304*
061 346
061 338
061 374
114 888
061 020
061 360
15E 291
15E 292
15E 293
15E 294
061 215*
061 342+
7
7
7
8.6
12.5
18
21
14
14
14
14
13
14
4.8
7.9
6.3
6.3
8.0
6.4
6.35
6.4
7.9
9.5
12.7
19.1
19.1
9.4
14.0
9.5
9.5
10.0
15.8
12.7
12.5
15.6
17.5
22.0
28.5
28
polyurethane
rubber
Neoprene
PVC
PVC
PVC
PVC
PVC
Buna-N
Synth. rubber
2.7
2.7
2.7
2.7
4.3
4.3
4.57
7.0
Nylon
self-coiling
Spiral hose
Cupper
cover
colour
Fluid/properties
OD
3.96 (5/32)
3.96 (5/32)
3.96 (5/32)
3.96 (5/32)
6.35 (¼″)
6.35 (¼″)
6.35
9.5
Cover
Core
Insert
-
Fabric steel SS
Textile fabric
2 fabrics
Textile fabric
2 fabrics
2 fabrics
2 fabrics
1 fabrics
1 textile fabric
1 steel fabric
Nylon 12
Nylon 12
Nylon 12
Nylon
polyethylene
polyethylene
Nylon
Nylon
Polyethylene/
Polyurethane
polyurethane
Kautschuck
polyurethane
polyurethane
Nylon
Buna-N
PVC
PVC
PVC
PVC
PVC
Buna-N
Synth. rubber
black
red
green
Clear
Transparent
black
black
black
black
red
red
pink
black
black
black
blue
red
red
red
red
red
black
+ = conducts electricity – conductible inner hose
* = conducts electricity – cable strands
Part
Connection thread
Fixture
Sheathed hose finished length in m and part no.
No.
Part No.
1.2
1.8
3.0
4.5
7.5
15.0
061 304
NW 3/16″
061 338
NW ¼″
061 020
NW ¼″
15E 291
NW ¼″
061 360
NW ¼“
061 140
NW ¼″
061 346
NW 5/16″
15E 292
NW 5/16″
15E 293
NW ⅜″
15E 294
NW ½″
¼″ NPS(I) – ¼″ NPS(A)
¼″ NPT(A) – ¼″ NPT(A)
Spiral hose
¼″ NPS(I) – ¼″ NPS(I)
¼″ NPS(A) – ¼″ NPS(I)
¼″ NPS(I) – ¼″ NPS(I)
R ¼″ BSP(I)
¼″ NPS(I)
⅜″ NPS(I)
R⅜″ BSP(I)
¼″ NPT(I) – ½″NPT(A)
⅜″ NPT(A)– ⅜″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
061 215+ ½″ NPT(A) – ¾″ NPT(A)
NW ¾″
¾″ NPT(A) – ¾″ NPT(A)
72.57
40.82
45.36
54.43
113.4
163.3
190.5
Special
241 811
207 348
200 115
104 415
109 124
200 033
212 005
109 125
206 749(0.9)
200 118(0.8)
200 991
216 069
(8.0)
109 127
109 126
109 123(0.45)
109 128(12.0)
237 583(0.76)
C12014 (2.44)
C12,007
(0.91)
115 425
239 636³
239 637³
210 866
210 867
205 600
239 631³
103 605
6773 017
210 868
244 448 (7.9)
104 414
6773 021
214 652
(0.52)
110 046
110 048
205 418
214 950
208 610
061 342+
¾″ NPT(A) – ¾″ NPT(A)
NW ¾″
³ = with spring guards both ends + = conducts electricity
21/01/09
–
54.43
–
236 873
¼″ NPS(I) – ¼″ NPS(I)
⅛″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPS(I) – ¼″ NPS(I)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ½″ NPT(A)
⅛″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
Weight
gram per
30 cm
22 – 2
214 656
214 955
214 651
(5.1)
253 229
205 548
214 655
214 951
208 611
214 657(1.5)
214 653(30.0)
218 093(0.56)
214 952(0.4)
214 954 (0.8)
214 956(0.6)
214 953(0.4)
238 374(0.53)
LOW AND MEDIUM PRESSURE HOSES
(coating solvents)
Nylon
(synflex)
Nylon
Hose specification
Raw hose
Part No.
Oper
ating
press
ure
Dimensions
mm (in.)
Fluid/properties
Upper cover
fluid
Top cover
Colour
ID
OD
Core
Insert
061 135
054 123
054 175
061 345
061 132
054 188
054 785
054 780
061 134
061 205
061 195
bar
21
17
21
7
16
13
7
7
14
35
21
3.2
4.57
4.3
4.8
6.4
6.35
6.3
7.0
9.5
6.4
9.5
5.6
6.35
6.35
6.35
8.9
9.5
9.5
9.5
12.7
12.7
17.5
Nylon
Nylon 11
Nylon 11
Nylon
Nylon
PTFE
L.D. Polyethyl
Nylon PA 12
Nylon
Nylon
Nylon
none
none
none
none
none
none
none
none
1 fabrics
1 fabrics
none
none
polyurethanes
none
none
none
none
none
Neoprene
Synth. rubber
Clear
Natural/light
Natural/light
Clear
Clear
Natural/light
Grey
blue
Clear
black
black
061 200
061 185
061 260◊
061 188
016 684+
016 689+
35
35
35
35
12
12
12.7
19.1
19.1
25.4
19.0
25.0
21.8
30.2
30.2
38.1
29.0
37.0
Nylon
Nylon
Nylon
Nylon
Synth. rubber
Synth. rubber
2 fabrics
2 fabrics
2 fabrics
2 fabrics
Textile fabric, 1 wire
Textile fabric, 1 wire
Neoprene
Neoprene
Neoprene
Neoprene
Synth. rubber
Synth. rubber
black
black
black
black
black
black
Part No.
061 135
NW ⅛″
061 345
NW 3/16″
061 132
NW ¼″
054 785
NW 6,3
054 780
NW 7.0
061 205
NW ¼″
061 134
NW ⅜″
061 195
NW ⅜″
061 200
NW ½″
061 185
NW ¾″
061 260
NW ¾″
061 188
NW 1″
Connection thread
⅛″ NPT(A) – ⅛″ NPT(A)
¼″ NPS(A)
⅜″ NPS(I)
⅜″ NPS(A)
⅛″ NPT(A)
¼″ NPS(I) – ¼″ NPS(I)
⅜″ NPS(I) – ⅜″ NPS(I)
¼″ NPS(I)
⅜″ NPS(I)
⅜″ NPS(I)
¼″ NPS(I) − ¼″ NPS(I)
Fixture
Part No.
239 629²*
239 630²*
205 437
205 447
205 448
111 913²*
111 914²*
1.8
4.5
239 633³
7.5
15.0
Special
239 634³
205 406
215 637
(8 m)
208 591
206 965 (0.9)
215 638
235 339³(7.9)
244 447³(7.9)
243 802
243 803
(0.9)
243 804
(3.0)
243 805
205 375
104 415
104 084
205 439
113 187 NY
212 006
216 076 (8.0)
194 178³
104 414
6773 021
205 398
194 179(2.4)³
205 169 (0.9)
114 253*
208 112
214 961³
221 170*‡
1″ NPT(A) – 1″ NPT(A)
1″ NPT(A)
188 150°
² = with spring guard on one end
³ = with spring guards both ends
+ = Electricity conducting copper wire
◊ = Resistance max 1 MΩ per 7.6 m
205 142
114 198*
202 300
235 148
¾“ NPT(A) − ¾“ NPT(A)
21/01/09
1.2
205 436
¼″ NPS(I) − ¼″ NPS(I)
¼″ NPT(A) – ¼″ NPS(I)
¼″ NPS(I) – ¼″ NPS(I)
⅜″ NPS(I) – ⅜″ NPS(I)
⅜″ NPS(I)
½″ NPT(I)
¼″ NPS(I) – ¼″ NPT(I)
⅜″ NPS(I) – ⅜″ NPS(I)
R⅜″ BSP(I)
½″ NPT(A) – ⅜″ NPS(I)
½“ NPT(A) − ⅜″ NPT(A)
½″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
¾″ NPT(A) − ½″ NPT(A)
¾″ NPT(A) – ¾″ NPT(A)
0.6
217 382
(3.0)
221 171 *‡ 221 172*‡
(3.0)
214 959²*
220 372
* = Stainless steel
° = Without fixt ure
‡ = Grounding wire compressed fitting
22 – 3
214 960³ (1.1)
236 075³ (1.1)
220 373 (3.7)
PRESSURE HOSES for universal use
Buna-N
(NBR)
(air, water, oil, grease, etc.)
Raw
hose
Part No.
Operating
pressure
bar
061 127*
061 257*
061 089*
061 083*
061 062*
061 258*
061 084*
061 253*
061 216*
061 222*
061 380*
061 074*
061 262*
061 228
061 220*
061 259*
061 244*
061 409*
061 367
88
350
14
21
158
280
140
207
240
350
415
53
155
215
350
88
165
345
345
Dimensions in mm
Fluid/properties
Top cover
Colour
ID
OD
Core
Insert
fluid
6.4
6.4
9.5
9.5
9.5
9.5
12.7
12.7
12.7
12.7
12.7
19.1
19.1
19.1
19.1
25.4
25.4
25.4
31.75
14.3
13.7
16.7
17.5
19.8
17.8
19.1
19.9
25.4
27.9
24.6
31.8
28.1
29.0
33.3
35.7
35.0
38.6
45.5
Buna-N
Buna-N
Buna-N
Buna-N
Buna-N
Buna-N
Buna-N
Buna-N
Buna-N
Buna-N
Neoprene
Buna-N
Buna-N
Synth. rubber
Neoprene
Buna-N
Buna-N
Neoprene
Synth. rubber
2 fabrics
2 wire
1 fabrics
4 fabrics
1 wire
2 wire
1 wire
1 wire
2 wire
2 wire
4 wire
2 fabrics
2 wire
2 wire
2 wire
1 wire
2 wire
4 wire
4 wire
Buna-N
Buna-N
Buna-N
Buna-N/PVC
Buna-N/PVC
Buna-N
Neoprene
Buna-N
Buna-N
Buna-N
Neoprene
Neoprene
Buna-N
Synth. rubber
Buna-N
Buna-N
Buna-N/PVC
Buna-N/PVC
Synth. rubber
black
black
red
black
Grey
black
black
black
black
black
black
black
black
black
black
black
black
black
black
*= Raw hose not available – only sheathed hose finished length
Raw hose
Part No.
Connection thread
0.3
061 127
NW ¼″
061 257
NW ¼″
061 089
NW ⅜″
061 083
NW ⅜″
061 258
NW ⅜″
061 062
NW ⅜″
061 084
NW ½″
061 253
NW ½″
0.6
1.2
1.8
3.0
4.5
7.5
15.0
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ⅜″ NPT(A)
¼″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ½″ NPT(A)
¼″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ½″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ⅜″ NPT(A)
⅜″ NPS(I) – ½″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)+
⅜″ NPT(A) – ½″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
⅜″ NPT(A) – ½″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
½″ NPT(A) – ¾″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
061 216
NW ½″
061 222 ½″ NPT(A) – ½″ NPT(A)
NW ½″
061 380 ½″ NPT(A) − ½″ NPT(A)
NW ½″
061 074 ½″ NPT(A) – ¾″ NPT(A)
NW ¾″
¾″ NPT(A) – ¾″ NPT(A)
061 262 ½″ NPT(A) – 1″ NPT(A)
NW ¾″
¾″ NPT(A) – ¾″ NPT(A)
061 228 ¾″ NPT(A) – ¾″ NPT(A)
NW ¾“
061 220 ¾″ NPT(A) – ¾″ NPT(A)
NW ¾″
061 259 1″ NPT(A) – 1″ NPT(A)
NW 1″
061 244 1″ NPT(A) – 1″ NPT(A)
NW 1″
061 409 1″ NPT(A) – 1″ NPT(A)
NW 1
061 367 1 ¼″ NPT(A)
+ = Stainless steel
21/01/09
Special
205 174(12.2)
109 149
109 146
(0.38)
(0.4)
204 560
109 150
109 152
109 153
(6.0)
109 147
204 561
(0.9)
208 048
109 130
203 320
109 131
(3m)
109 154
109 156
(10.6)
109 158
110 326
(4.9 m)
109 132
109 134
(12m)
109 135 (18.0)
109 133 (9.2)
218 498 (18.2)
109 170
109 169(12.2)
207 831
205 753(12.2)
202 961
109 165
109 161
109 162
109 151(3.6)
109 157(12.2)
109 167
109 163
158 743
214 601(0.65)
220 596
238 401
220 591
109 063
220 590
220 594
220 608
214 962
215 445
(1.5)
215 441
220 603
220 602
220 593(6.0)
237 861(23.0)
214 964
215 443
215 444
C12.380
155 816
237 866
109 105
218 689
215 241
215 238
215 239
215 240
109 064
(0.71)
115 042
218 986
244 657
521 973
22 – 4
237 867(20.0)
HIGH PRESSURE HOSES (flex)
Raw hose
Part No.
061 448
061 440
061 446
061 461
061 240
061 447
061 462
061 463
Raw hose
Part No.
Operating
pressure
bar
227
207
227
276
207
227
276
276
Connection thread
Dimensions in mm
Fluid/properties
ID
OD
Core
Insert
Top cover
5.0
6.5
6.5
6.4
9.5
9.6
9.5
12.8
10.7
12.2
12.2
14.4
18.5
17.8
19.2
22.5
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
1 textile fabric
4 textile fabric
4 textile fabric
Textile fabric
2 textile fabric
1 textile fabric
Textile fabric
Textile fabric
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
Top cover
Colour
blue
blue
blue
blue
blue
blue
blue
blue
0.6
1.0
2.0
5.0
7.5
15.0
30.0
Special
Safety Flex Hose – Temperature to max. 66°C
061 448
NW 3/16″, 5 mm
061 446
NW ¼″, 6.3 mm
061 461
NW ¼″, 6.4 mm
061 240
NW ⅜″, 9.5 mm
061 447
NW ⅜″, 9.5 mm
061 462
NW ⅜″, 9.5 mm
061 463
NW ½″, 12.7 mm
¼″ NPS(I)
¼″ NPS(I) – ¼″ NPT(A)
¼“ NPS(I)
¼″ NPS(I)°
¼″ NPS(I)
¼″ NPT(A)
¼″ NPS(I) – ¼″ NPT(A)
238 358
(0.9)
249 149°
239 984
(0.63)
241 926
(0.29)
¼″ NPS(I)
¼″ NPS(I) – ⅜″ NPT(A)
238 359
(1.8)
245 798°
248 008
(1.2)
241 735
(0.90)
214 981
(4.5)
223 756
(4.5)
238 959 (1.4)
240 793
249 080°
240 794
223 771
249 232° (0.91)
241 272 (20.0)
277 250
277 249
(0.9)
239 287
(0.42)
240 796
240 797
245 225°
241 275
239 278 (0.3)
277 351
(0.9)
277 251
277 253
Safety Flex hoses with spring guards at both ends
+ = Stainless steel
° = Nickel plated fitting conn ector
21/01/09
214 697
241 812+
⅜″ NPT(A) − ⅜“ NPT(A) 217 378
(0.76)
⅜″ NPT(A) − ⅜“ NPS(I) 222 516
(0.73)
220 849
⅜″ NPS(I) − ⅜“ NPS(I)
(0.76)
⅜″ NPS(I)
⅜″ NPT(A)
⅜″ NPS(I) – ½“NPT(A)
⅜″ NPS(I)
½″ NPT(I)
214 698
22 – 5
HIGH PRESSURE HOSES (steel)
Raw hose
Part No.
Operating
pressure
bar
061 333 GWI (6877 554)²
061 328 GWI (6877 550)²
061 341
061 334 GWI (6877 551)²
061 326 GWII (6877 558)²
061 335 GWI (6877 552)³
061 327 GWII (6877 556)³
061 336 GWI (6877 553)³
061 340 GWI
061 329 GWII (6877 557)³
061 337 GWII
H42 500 ¼“
H52 500 ¼“
H72 500 ¼“
H43 800 ⅜“
H53 800 ⅜“
H73 800 ⅜“
H45 000 ½“
H55 000 ½“
H75 000 ½“
345
283
345
283
345
207
345
172
207
345
103
310
386
500
310
386
500
310
386
500
Raw hose
Part No.
Connection thread
Dimensions in mm
Fluid/properties
ID
OD
Core
Insert
Top cover
3.2
4.7
4.8
6.3
6.3
9.7
9.9
12.8
13.1
12.8
19.4
6.4
6.4
6.4
9.5
9.5
9.5
12.7
12.7
12.7
7.0
9.8
9.4
11.9
12.5
15.9
17.0
19.3
18.3
20.7
26.7
13.72
13.72
13.72
17.53
17.53
17.53
21.00
21.00
21.10
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
Nylon
1 wire braid
1 wire braid
1 layer wire
1 wire braid
2 wire braids
1 wire braid
2 wire braids
1 wire braid
1 wire braid
2 wire braids
1 wire braid
2 wire braids
2 wire braids
1 wire 1 textile
2 wire braids
1 wire 1 textile
1 wire 1 textile
1 wire 1 textile
1 wire 1 textile
1 wire 1 textile
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
polyurethane
061 333
NW ⅛″, 3.2 mm
061 328
NW 3/16″, 4.8 mm
061 341
NW 3/16″, 4.8 mm
061 334
NW ¼″, 6.3 mm
061 335
NW ⅜″, 9.7 mm
061 336
NW ½″ 12.8 mm
061 340
NW ½″, 13.1 mm
061 337
NW ¾″, 19.4 mm
¼″ NPS(I)
238 771
238 772
¼″ NPS(I)
¼″ NPS(I)+
¼″ NPS(I)
238 708
239 069
239 083
238 709
¼″ NPS(I)
¼″ NPS(I)+
⅜″ NPS(I)
238 823
238 824
239 108
238 829
238 830
½″ NPS(I)
238 836
238 837
½″ NPT(A)
½″ NPT(A)+
¾″ NPS(I)
H42 500
NW ¼“ 6.4 mm
H52 500
NW ¼“ 6.4 mm
H72 500
NW ¼“ 6.4 mm
H43 800
NW ⅜“ 9.5 mm
H53 800
NW ⅜“ 9.5 mm
H73 800
NW ⅜“ 9.5 mm
H45 000
NW ½“ 12.7 mm
H55 000
NW ½“ 12.7 mm
H75 000
NW ½“ 12.7 mm
¼″ NPS(I)
¼″ NPS(I)
⅜″ NPS(I)
⅜″ NPS(I)
⅜″ NPS(I)
238 773
30.0
238 774
238 775
238 711
238 712
238 713
238 832
239 107
238 833
239 111
238 831
238 838
238 839
238 840
238 841
239 148 (0.49)
239 153 (0.58)
238 843
238 844
239 149 (0.91)
239 154 (0.91)
238 845
238 846
238 847
238 848
H42 503
(0.9)
H52 503
(0.9)
H72 503
(0.9)
H43 803
(0.9)
H53 803
(0.9)
H73 803
(0.9)
H42 510
(3.0)
H52 510
(3.0)
H72 510
(3.0)
H43 810
(3.0)
H53 810
(3.0)
H73 810
(3.0)
H45 010
(3.0)
H55 010
(3.0)
H75 010
(3.0)
H42 525
H42 550
H42 51X
H52 525
H52 550
H52 51X
H72 525
H72 550
H72 51X
H43 825
H43 850
H43 81X
H53 825
H53 850
H53 51X
H73 825
H73 850
H73 81X
H45 025
H45 050
H45 01X
H55 025
H55 050
H55 01X
H75 025
H75 050
H75 01X
Special
238 777
239 082
H42 506
(1.8)
H52 506
(1.8)
H72 506
(1.8)
H43 806
(1.8)
H53 806
(1.8)
H73 806
(1.8)
½″ NPS(I)
½″ NPS(I)
½″ NPS(I)
H X XX XX
Length in feet
I. D. in 1/100 inch
Pressure
4 = 310 bar (4500 psi,
5 = 386 bar (5600 psi, gray)
7 = 500 bar (7250 psi, black)
22 – 6
239 109 (0.37)
238 835
+ = Stainless steel
300 m roll
° = Nickel plated fitting connector
(x.x) = length in metres
violet)
21/01/09
blue
blue
blue
blue
blue
blue
blue
blue
blue
blue
blue
violet
Grey
black
violet
Grey
black
violet
Grey
black
0.6
1.0
2.0
5.0
7.5
15.0
Nylon hose with wire braid insert – Temperature to max. 82°C
¼″ NPS(I)
Top cover
Colour
238 842
(6877 xxx)² =
(6877 xxx)³ = 1 50 m roll
HOSE KITS
Part No.
Name
Operating
pressure
214 695
239 165
239 342
7.5 m hose kit with 2 x nylon hoses 4.8 mm, I.D. ¼″ NPS(I)
7.5 m hose kit* with 2 x nylon hoses 6.3 mm, I.D. ¼″ NPS(I)
7.5 m hose kit* with 2 x nylon hoses 6.3 mm, I.D. ¼″ NPS(I) stainless steel
* one hose is 254 mm longer
239 102
239 104
Air/Airless hose ¼’ 7.5 m ¼″ NPS(I)
283
283
239 074
239 076
Air/Airless hose ¼’ 7.5 m stainless steel fitting ¼″ NPS(I)
Air/Airless hose ¼’ 15.0 m stainless steel fitting ¼″ NPS(I)
283
283
238 608
238 610
345
345
238 721
Air/Airless hose ¼’ 15.0 m 3/8″ NPS(I)
345
239 347
239 311
Air/Airless hose circulation ¼’ 7.5 m ¼″ NPS(I)
Air/Airless hose circulation ¼’ stainless steel 7.5 m ¼″ NPS(I)
239 361
239 362
239 363
239 364
Air/Airless hose – Pro AA 4500 ¼″ 7.5 m ¼″ NPS(I)
283
283
283
283
Mobile President
Wall unit President
Small cart Monark
Mobile President
239 097
239 098
239 099
239 100
Air/Airless hose– Pro AA 4500 ¼″ 7.5 m stainless steel ¼″ NPS(I)
Air/Airless hose – Pro AA 4500 ¼″ 15.0 m stainless steel
283
283
283
283
Mobile President
Wall unit President
Small cart Monark
239 357
239 352
Air/Airless hose – Pro AA 4500 Hot ¼″ 7.5 m
Air/Airless hose – Pro AA 4500 Hot ¼″ stainless steel 7.5 m
Hose kits in cover
227
283
283
Hose kits bound (tie wrap 103 473)
Hose kits vulcanised
Hose kits in cover
283
283
Hose kits bound
Hose kits in cover
283
283
Safety hose
070 353
70354 012008
70354 020023
41098000010
41079000010
246 078
21/01/09
Hose cover length per foot (23″ feet for 7.5 m hose kit) fibreglass with polyvinyl ø31.75 – 34 mm, black
Safety hose, SBR external pattern, internally smooth textile insert Ø I.D. 35 mm black –40° – +80°C, 40 m
Safety hose braid, polyamide 6.6, in grey, ø range from 18 – 30 mm, roll of 50 m
Safety hose for 2 x NW10 830, roll of 50 m
Safety hose, polyethylene transparent core I.D. 77 mm, roll of 200 m
Safety hose – braid, polyamide, black, normal Ø 63.5, 15 m, −57° to +125°C
22 – 7
HOSES ACCESSORIES
PTFE hoses
Part No.
Length m
512 028
685 612
685 614
205 324
206 966
205 099
205 058
552 231
205 349
204 938
206 024
207 295
207 296
206 260
235 905
685 602
685 603
222 935
222 934
685 605
512 247
3.0
2.0
4.6
0.3
0.48
0.76
1.8
3.6
4.5
7.5
15.0
0.48
0.76
1.8
0.76
4.6
7.6
4.5
4.5
2.0
2.3
Fluid
ID mm
PFTE hose
4.8
Operating
pressure bar
207
PFTE hose
5.6
276
Thread Size
Fixture
¼″ NPT(A)
Steel
¼″ NPT(I)
stainless steel
Temperature
At 172 bar max.
93°C
PFTE hose
6.4
207
¼″ NPS(I)
Steel
At 103 bar max.
230°C
PFTE hose
10.3
172
⅜″ NPT(A)
Steel
PFTE hose
7.8
275
⅜″ NPT(A)
stainless steel
PFTE hose
7.8
276
⅜″ NPT(A)
stainless steel
PFTE hose
PFTE hose
PFTE hose
PFTE hose
7.9
9.5
15.7
15.9
350
280
276
105
½″ NPT(A) x ½″ NPT(I)
½″ NPT(A) x ½″ NPT(I)
¾″ NPT(A)
¾″ NPT(A)
Steel
Steel
stainless steel
Steel
Suction hoses – (for metric suction hoses see Chapter 1-22 / 1-23 Merkur and 1-40 Orion)
Part No.
188 150
208 112
214 960
236 075
214 961
214 959
237 522
Length m
0.91
0.61
1.05
1.05
1.8
1.8
1.8
ID mm
19.1
19.1
19.1
19.1
19.1
25.4
25.4
247 301
1.8
25.4
247 302
3
25.4
185 381
170 706
222 914
1.04
1.2
2.44
25.4
25.4
38.1
Thread Size
Without fixture
¾″ x ½″NPT(A)
¾″ NPT(A)
¾″ NPT(A)
¾″ NPT(A)
1″ NPT(A)
1″ NPT(A)
1” NPT(A) On one
side
1” NPT(A) On one
side
Without fixture
Without fixture
1 ½″ NPT(A)
Notes
stainless steel
stainless steel
With swivel nipple on one side
On one side with quick connection to adapter 116 402, 1“
NPT(A)
On one side with quick connection to adapter 116 402, 1“
NPT(A)
Polyethylene
Fluid hoses, earthed (061 260) with the grounding wire compressed fitting (also suction hose)
Part No.
Length m
ID mm
Core
Insert
Top cover
0.9
1.8
3.0
19.1
19.1
19.1
Nylon
Nylon
Nylon
2 fabrics
2 fabrics
2 fabrics
Neoprene
Neoprene
Neoprene
221 170
221 171
221 172
Operating
pressure
bar
35
35
35
Thread Size
¾″ NPT(A)
¾″ NPT(A)
¾″ NPT(A)
Fixture
stainless steel
stainless steel
stainless steel
Fluid hose 12 bar maximum working pressure
Part No.
238 740
Name
1.8 m x ID 9.5 mm hose inside polyethylene, outside rubber ¼” NPT(I) x ⅜” NPT(A)
Special nipple (see also gun accessories Chapter 8-19 / 8-20)
Part No.
6785 508
6789 269
109 046
Name
Connection piece, ¼”(I) x M16 x 1.5(A) for connection of Graco guns to hoses with metric thread
Connection piece, ¼”(A) x M16 x 1.5(I) for connection of Graco hoses to guns with metric thread
Adapter 11/16″ – 16 UN(I) x ⅜″ NPT(A)
Guns/hose kits (textile fabric)
243 922 incl.: 240 794 hose ¼″, 15 m, gun SG3 243 238, tip 286 515
287 076 incl.: 240 794 hose ¼″, 15 m, 238 358 whip end 3/16″, gun PRO Contractor II, tip 286 517
287 038 incl.: 240 794 hose ¼″, 15 m, 238 358 whip end 3/16″, gun PRO Contractor II 246 222, RAC X, tip LTX 621
287 123 incl.: 240 794 hose ¼″, 15 m, 238 358 whip end 3/16″, gun PRO Contractor II 246 538, tip 286 517
287 124 incl.: 240 794 hose ¼″, 15 m, 238 358 whip end 3/16″, gun PRO FTX-E 246 539, RAC 5 & tip 286 517
243 321 incl.: 240 794 hose ¼″, 15 m, 238 358 whip end 3/16″, gun Silver 243 283, tip 286 517
287 041 incl.: 240 794 hose ¼″, 15 m, 238 358 whip end 3/16″, gun Silver Flex Plus, RAC X, tip LTX 517
287 042 incl.: 240 797 hose ⅜″, 15 m, 238 358 whip end 3/16″, gun Silver 246 240, RAC X, tip LTX 517
287 043 incl.: 277 251 hose ⅜″, 15 m, 244 926 whip end ¼″, gun Silver 246 240, RAC X, tip LTX 517
287 037 incl.: 240 797 hose ⅜″, 15 m, 238 358 whip end 3/16″, gun Pro Contractor II 246 222 , RAC X, tip 517
241 338 incl.: 240 797 hose ⅜″, 15 m, 241 735 whip end ¼″, gun Texture 241 705, tip GHD 427
287 852 incl.: 277 251 hose ⅜″, 15 m, 277 249 whip end ¼″, gun Texture 241 705, tip GHD 655 for HydraMax 350
Guns/hose kits (steel fabric)
238 615 incl.: 237 072 hose ⅜″, 15 m, 237 070 whip end ¼″, gun 248 609, RAC without tip
21/01/09
22 – 8
HOT HOSES
used only in Therm-O-Flow systems 240 V
Part No.
115 865
115 866
115 867
115 868
115 869
115 870
115 871
115 872
115 902
115 873
115 874
115 875
115 876
115 877
115 878
115 879
115 903
115 880
115 881
115 882
115 883
115 884
115 885
115 886
115 887
115 885
21/01/09
Length
m
ID mm
Fitting
Operating
Pressure
3
6
7.5
1.8
3
4.5
6
7.5
1.8
3
4.5
1.8
3
4.5
6
7.5
1.8
3
4.5
6
7.5
1.8
3
4.5
6
7.5
7.9
7.9
7.9
12.7
12.7
12.7
12.7
12.7
10.2
10.2
10.2
12.5
12.5
12.5
12.5
12.5
15.7
15.7
15.7
15.7
15.7
22
22
22
22
22
9/16″−18 JIC
9/16″−18 JIC
9/16″−18 JIC
⅞″−14 JIC
⅞″−14 JIC
⅞″−14 JIC
⅞″−14 JIC
⅞″−14 JIC
¾″−16 JIC
¾″−16 JIC
¾″−16 JIC
⅞″−14 JIC
⅞″−14 JIC
⅞″−14 JIC
⅞″−14 JIC
⅞″−14 JIC
1-1/16″−12 JIC
1-1/16″−12 JIC
1-1/16″−12 JIC
1-1/16″−12 JIC
1-1/16″−12 JIC
1-5/16″−12 JIC
1-5/16″−12 JIC
1-5/16″−12 JIC
1-5/16″−12 JIC
1-5/16″−12 JIC
103
103
103
103
103
103
103
103
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
22 – 9
Instruction
manual
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
309 160
HIGH AND LOW PRESSURE FITTINGS
SWIVEL UNION 45°
UNION, swivel
Outer – inner
Part No.
Dimensions
Mat
bar
C19,002
208 434
513 949
113 915
156 823
114 339
157 705
112 497
112 496
112 498
110 476
111 748
155 665
235 208
235 207
162 505
158 256
236 892
190 451
114 190
156 684
113 344
157 785
112 268
202 965
160 022
⅛″ NPT(A) – ⅛″ NPT(I)
⅛″ NPT(A) – ¼″ NPS(I)
⅛″ NPT(A) – ¼″ NPS(I)
⅛″ NPT(A) – ¼″ NPS(I)
¼″ NPT(A) – ¼″ NPS(I)
¼″ NPT(A) – ¼″ NPS(I)
¼″ NPT(A) – ⅜″ NPS(I)
¼″ NPT(A) – ⅜″ NPS(I)
¼″ NPT(A) – ⅜″ BSP(I)
¼″ NPT(A) – ⅜″ BSP(I)
⅜″ NPT(A) – ¼″ NPS(I)
⅜″ NPT(A) – ¼″ NPS(I)
⅜″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(A) – ⅜″ NPS(I) (35 mm)
⅜″ NPT(A) – ⅜″ NPS(I) (48 mm)
⅜″ NPT(A) – ½″ NPS(I)
½″ NPT(A) – ⅜″ NPS(I)
½″ NPT(A) – ⅜″ NPS(I)
½″ NPT(A) – ½″ NPS(I)
½″ NPT(A) – ½″ NPS(I)
½″ NPT(A) – ½″ NPS(I)
½″ NPT(A) – ¾″ NPS(I)
¾″ NPT(A) – ¾″ NPS(I)
¾″ NPT(A) – ¾″ NPS(I)
1″ NPT(A) – ¾″ NPS(I)
1″ NPT(A) – 1″ NPS(I)
ST
ST
VA
MS
ST
VA
ST
VA
ST
VA
ST
VA
ST
VA
VA
ST
ST
VA
ST
VA
ST
ST
ST
VA
ST
ST
350
350
116 648
103 977
236 433
113 864
116 470
1″ NPT(A) – 1″ NPS(I)
1″ NPT(A) – 1″ NPS(I) (50.8 mm)
1″ NPT(A) – 1″ NPS(I) (76.2 mm)
1½″ NPT(A) – 1½″ NPS(I)
2″ NPT(A) – 2″ NPS(I)
ST
VA
VA
ST
ST
17.5
350
350
350
350
350
510
350
350
350
210
240
350
350
250
155
310
140
290
21
21
128
Part
No.
Dimensions
Mat
Operating
pressure
bar
110 220
109 106
110 195
161 889
209 029
207 411
222 297
105 281
¼″ NPT(A) – ¼″ NPS(I)
¼″ NPT(A) – ¼″ NPS(I)
¼″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(I) – ⅜″ NPS(I)
½″ NPT(A) – ½″ NPS(I)
¾″ NPT(A) – ¾″ NPS(I)
ST
ST
ST
ST
VA
ST
ST
ST
140
510
350
350
350
350
250
350
UNION, swivel
Inner – inner
Part
No.
Dimensions
Mat
Operating
pressure
bar
155 570
159 153
156 173
207 152
155 653
161 077
155 865
203 828
156 172
202 966
158 383
¼″ NPT(I) – ¼″ NPS(I)
⅜″ NPT(I) – ¼″ NPS(I)
⅜″ NPT(I) – ⅜″ NPS(I)
⅜″ NPT(I) – ⅜″ NPS(I)
½″ NPT(I) – ¼″ NPS(I)
½″ NPT(I) – ⅜″ NPS(I)
½″ NPT(I) – ½″ NPS(I)
½″ NPT(I) – ¾″ NPS(I)
¾″ NPT(I) – ¾″ NPS(I)
¾″ NPT(I) – 1″ NPS(I)
1″ NPT(I) – 1″ NPS(I)
ST
ST
ST
VA
ST
ST
ST
ST
ST
ST
ST
350
350
510
350
350
240
310
350
350
290
290
UNION, swivel
Inner – inner 90°
UNION, swivel
Outer – inner 90°
Part No. Dimensions
C19,005
155 541
114 446
116 395
155 495
155 494
207 123
217 430
161 037
155 470
C19 024
116 095
C50 359
160 327
110 292
107 409
119 363
102 806
112 580
⅛“ NPT(A) – ⅛“ NPS(I)
¼″ NPT(A) – ¼″ NPS(I)
¼″ NPT(A) – ¼″ NPS(I)
¼″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(A) – ¼″ NPS(I)
⅜″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(A) – ½″ NPS(I)
½″ NPT(A) – ⅜″ NPS(I)
½″ NPT(A) – ½″ NPS(I)
½″ NPT(A) – ½″ NPS(I)
½″ NPT(A) – ¾″ NPS(I)
¾″ NPT(A) – ½″ NPS(I)
¾″ NPT(A) – ¾″ NPS(I)
¾″ NPT(A) – ¾″ NPS(I)
1″ NPT(A) – ¾″ NPS(I)
1″ NPT(A) – 1″ NPS(I)
1″ NPT(A) – 1″ NPS(I)
1¼″ NPT(A) – 1¼″ NPS(I)
Mat
bar
ST
ST
VA
ST
ST
ST
VA
ST
ST
ST
ST
ST
ST
ST
VA
ST
ST
ST
ST
410
350
345
350
350
350
240
350
210
390
155
210
160
160
155
190
105
Part
No.
Dimensions
Mat
Operating
pressure
bar
157 676
162 803
155 677
159 801
157 416
113 934
156 589
112 572
112 955
109 512
¼″ NPT(I) – ¼″ NPS(I)
¼″ NPT(I) – ⅜″ NPS(I)
⅜″ NPT(I) – ⅜″ NPS(I)
⅜″ NPT(I) – ½″ NPS(I)
½″ NPT(I) – ½″ NPS(I)
½″ NPT(I) – ½″ NPS(I)
¾″ NPT(I) – ¾″ NPS(I)
¾″ NPT(I) – ¾″ NPS(I)
1″ NPT(I) – 1″ NPS(I)
1 ½″ NPT(I) – 1 ½″ NPS(I)
ST
ST
ST
ST
ST
VA
ST
VA
ST
ST
350
350
350
290
280
210
170
UNION, swivel
Outer – inner
Part
No.
Dimensions
Mat
Operating
pressure
bar
117 595
¼″ NPT(A) – #5 JIC (½“ – 20
UNF)
¼″ NPT(A) – #6 JIC (9/16“ – 18
UNF)
ST
410
ST
345
Rotary screw joint
117 506
Inner – inner
Part No.
Dimensions
Mat.
Operating
pressure
bar
119 020
517 099
521 975
¾″ NPT(I) – ¾″ NPT(I)
1″ NPT(I) – 1″ NPT(I)
1 ¼″ NPT(I) – 1 ¼″ NPT(I)
ST
ST
ST
410
410
410
105
140
Abbreviations:
MS = Brass
Z = Z-Swivel
ST = Steel
AL = Aluminium VA= NiRo steel
NY= Nylon
TE= PTFE
GT= Malleable cast iron VI= Viton
WVB= reusable
NPT(A)= Conical hose – (outer) thread
NPS(I)= Cylindrical hose – (inner) thread
Note:
• Indicated operating pressures (BD) based on 4-fold safety.
21/01/09
22 – 10
• Fittings with an operating pressure (BD) above 25 bar are
correspondingly marked.
• All standard steel, brass and cast fittings and fixtures are
galvanized, chrome plated or nickel plated.
(xx) Special length
† = electroless nickel plating
CONNECTOR
Special length (xx)
CONNECTOR
Part
No.
Dimensions
Mat.
103 656
151 243
C20,477
156 971
166 421
162 453
196 181
166 846
156 849
C20 483
166 469
167 702
162 485
196 178
188 089
158 491
166 244
114 373
160 032
510 073
C20 487
C20 489
C20 490
⅛″ NPT(A) – ⅛″ NPT(A)
⅛″ NPT(A) – ⅛″ NPT(A)
⅛″ NPT(A) – ⅛″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPS(A)
¼″ NPT(A) – ¼″ NPS(A)
¼″ NPT(A) – ¼″ NPS(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPS(A)
⅜″ NPT(A) – ⅜″ NPS(A)
⅜″ NPT(A) – ⅜″ NPS(A)
½″ NPT(A) – ½″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
¾″ NPT(A) – ¾″ NPT(A)
¾″ NPT(A) – ¾″ NPT(A)
¾″ NPT(A) – ¾″ NPT(A)
1″ NPT(A) − 1″ NPT(A)
1 ¼″ NPT(A) –1 ¼″
NPT(A)
MS
ST
ST
ST
VA
ST
ST †
VA
ST
VA
VA
MS
ST
ST †
VA
ST
VA
VA
ST
VA
ST
ST
ST
Tight
bar
sinking
25
45°
410
510
210
510
510
350
410
410
210
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
350
350
350
510
210
345
350
210
410
410
345
30°
30°
30°
Dimensions
Mat
151 519
111 643
191 872
191 929
195 224
112 495
112 493
156 296
157 350
165 198
164 856
164 672
196 177
196 176
112 494
113 070
166 863
164 856
160 704
162 449
159 239
112 027
158 979
111 874
161 800
194 048
166 606
098 193
157 191
190 864
166 443
192 593
503 086
158 555
6740 117
179 970
C38 306
¼″ NPT(A) –⅛″ NPT(A)
¼″ NPT(A) –⅛″ NPT(A)
¼″ NPS(A) –⅛″ NPT(A)
¼″ NPS(A) –⅛″ NPT(A)
¼″ NPT(A) –⅜″-18.6 SP
¼″ NPT(A) – ⅜″BSP(A) conical
¼″ NPT(A) – ⅜″BSP(A) conical
⅜″ NPT(A) –⅛″ NPT(A)(50.8)
⅜″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ¼″ NPT(A)(44)
⅜″ NPT(A) – ¼″ NPT(A)(43)
⅜″ NPT(A) – ¼″ NPS(A)
⅜″ NPT(A) – ¼″ NPS(A)
⅜” NPS(A) − ¼” NPT(A)
⅜″ NPS(A) – ¼″ NPT(A)
⅜″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ¼″ NPT(A)(33)
⅜″ NPT(A) – ¼″ NPT(A)(42.8)
⅜″ NPT(A) – ¼″ NPT(A)(92)
½″ NPT(A) – ¼″ NPT(A)
½″ NPT(A) – ⅜″ NPT(A)
½″ NPT(A) – ⅜″ NPT(A)
½″ NPT(A) – ⅜″ NPT(A)(70)
½″ NPT(A) – ⅜″ NPT(A)(70)
¾″ NPT(A) – ⅜″ NPS(A)
¾″ NPT(A) – ⅜″ NPT(A)
¾″ NPT(A) – ⅜″ NPT(A)(116)
¾″ NPT(A) – ⅜″ NPT(A)(116)
¾″ NPT(A) – ½″ NPT(A)
¾“ NPT(A) – ½“ NPT(A)
¾″ NPT(A) – ½″ NPT(A)
¾″ NPT(A) – ½″ NPT(A)(70)
1″ NPT(A) – ½″ NPT(A)
1″ NPT(A) – ¾″ NPT(A)
1″ NPT(A) – ¾″ NPT(A)(128)
1″ NPT(A) – ¾″ NPS(A)
1 ¼″ NPT(A) – 1″ NPT(A)
ST
VA
ST
VA
VA
VA
ST
ST
ST
ST
VA
ST
ST †
ST †
VA
VA
VA
VA
ST
ST
ST
VA
ST
VA
ST
ST
ST
VA
St
ST
VA
VA
VA
ST
ST
ST
VA
21/01/09
Tight
sink.
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
Dimensions
192 644
193 167
168 696
156 850
191 931
160 790
193 024
156 877
193 180
175 013
157 129
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
¾″ NPT(A) – ¾″ NPT(A)
¾″ NPT(A) – ¾″ NPT(A)
Mat Tight bar
sink.
(55)
(95.5)
(50.8)
(63.8)
(63.8)
(92)
(169)
(63.5)
(76.2)
(63.5)
(82.5)
ST
VA
VA
ST
VA
ST
ST
ST
VA
ST
ST
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
550
350
350
410
210
410
500
380
350
350
480
BUSHING, reducer, pipe
REDUCING DOUBLE NIPPLE
Part No.
Part
No.
bar
510
350
345
310
350
350
690
550
410
410
350
350
510
350
510
510
350
280
350
350
280
350
350
350
350
350
350
350
350
350
365
Part
No.
Dimensions
Mat.
Tight bar
sink.
100 030
196 180
503 025
100 730
100 176
168 160
100 329
C19 678
100 206
102 022
108 476
158 212
504 285
517 414
100 615
100 505
102 281
100 896
C19 652
101 742
106 466
C19 653
513 299
100 380
C19 654
158 586
502 851
C19 659
C19 660
C19 661
516 296
503 425
500 054
515 992
101 496
114 188
102 000
C19 668
112 972
112 839
102 283
109 505
¼″ NPT(A) – ⅛″ NPT(I)
¼″ NPT(A) – ⅛″ NPT(I)
¼″ NPT(A) – ⅛″ NPT(I)
⅜″ NPT(A) – ⅛″ NPT(I)
⅜″ NPT(A) – ¼″ NPT(I)
⅜″ NPT(A) – ¼″ NPT(I)
½″ NPT(A) – ⅛″ NPT(I)
½″ NPT(A) – ⅛″ NPT(I)
½″ NPT(A) – ¼″ NPT(I)
½″ NPT(A) – ¼″ NPT(I)
½″ NPT(A) – ¼″ NPT(I)
½″ NPT(A) – ⅜″ NPT(I)
½″ NPT(A) – ⅜″ NPT(I)
½″ NPT(A) – ⅜″ NPT(I)
¾″ NPT(A) – ¼″ NPT(I)
¾″ NPT(A) – ⅜″ NPT(I)
¾″ NPT(A) – ⅜″ NPT(I)
¾″ NPT(A) – ½″ NPT(I)
1″ NPT(A) − ¼″ NPT(I)
1″ NPT(A) – ⅜″ NPT(I)
1″ NPT(A) – ⅜″ NPT(I)
1″ NPT(A) – ⅜″ NPT(I)
1″ NPT(A) – ½″ NPT(I)
1″ NPT(A) – ½″ NPT(I)
1″ NPT(A) – ½″ NPT(I)
1″ NPT(A) – ¾″ NPT(I)
1″ NPT(A) – ¾″ NPT(I)
1 ¼″ NPT(A) – ¼″ NPT(I)
1 ¼″ NPT(A) – ½″ NPT(I)
1 ¼″ NPT(A) – ¾″ NPT(I)
1 ¼″ NPT(A) – ¾″ NPT(I)
1 ¼″ NPT(A) – ¾″ NPT(I)
1 ¼″ NPT(A) – 1″ NPT(I)
1 ¼″ NPT(A) – 1″ NPT(I)
1 ½ ″ NPT(A) – ¾″ NPT(I)
1 ½ ″ NPT(A) – ¾″ NPT(I)
1 ½ ″ NPT(A) – 1″ NPT(I)
1 ½ ″ NPT(A) – 1″ NPT(I)
1 ½ ″ NPT(A) – 1 ¼″ NPT(I)
2″ NPT(A) – 1″ NPT(I)
2″ NPT(A) – 1″ NPT(I)
2″ NPT(A) – 1 ½″ NPT(I)
ST
ST†
VA
ST
ST
VA
GT
ST
ST
VA
MS
ST
VA
MS
ST
ST
VA
ST
ST
GT
ST
ST
VA
ST
ST
St
VA
ST
ST
ST
VA
VA
ST
VA
ST
VA
GT
ST
GT
GT
MS
GT
30°
30°
30°
30°
30°
45°
30°
-30°
30°
30°
30°
-
22 – 11
350
350
380
350
350
210
25
410
350
350
350
410
70
350
350
350
350
410
16
270
410
210
210
410
210
210
410
410
410
21
210
210
210
16
410
25
16
16
16
BUSHING, reducer, pipe
ELBOW 90°
Outer – outer
Part No.
Dimensions
Mat bar
105 276
¾″ – 16 UNF – ¼″ NPT(I) with O ring
ST
210
DOUBLE NIPPLE NPT(A) – ISO 228 –G – BSP
Part No.
Dimensions
Mat bar
15C 332
15C 333
15B 521
234 083
¼“ NPT(A) − ¼“BSP(A)
Sealing ring fits 15C 332
⅜″NPT(A) – ⅜″ BSP(A)
⅜″ NPT(A) – ⅜″ BSP(A) incl. sealing
ring
¾″ NPT(A) – ¾″ BSP(A)
¾″ NPT(A) – 1″ BSP(A)
VA
15A 984
15B 525
VA
VA
550
540
VA
VA
500
365
ELBOW 90°
111 763
Part No.
Dimensions
110 207
110 249
111 763
114 342
114 504
109 544
15E279
116 117
114 506
108 307
106 465
⅛″ NPT(A) − ⅛″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
½″ NPT(A) – ½″ NPT(A)
¾″ NPT(A) – ¾″ NPT(A)
1″ NPT(A) – 1″ NPT(A)
Tight
sinking
30°
30°
30°
30°
Dimensions
Mat
Operating
pressure
bar
C19,425
108 417
165 472
500 658
100 119
500 947
102 325
100 349
112 192
112 040
112 885
C19 438
500 251
115 262
116 401
112 175
109 475
115 129
¼″ NPT(I) – ¼″ NPT(I)
¼″ NPT(I) – ¼″ NPT(I)
⅜″ NPT(I) – ⅜″ NPT(I)
⅜″ NPT(I) – ⅜″ NPT(I)
½″ NPT(I) – ½″ NPT(I)
½″ NPT(I) – ½″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
1″ NPT(I) – ½″ NPT(I)
1″ NPT(I) – 1″ NPT(I)
1″ NPT(I) – 1″ NPT(I)
1″ NPT(I) – 1″ NPT(I)
1 ¼″ NPT(I) – 1″ NPT(I)
1 ½″ NPT(I) – ¾″ NPT(I)
1 ½″ NPT(I) – 1 ½″ NPT(I)
1 ½″ NPT(I) – 1 ½″ NPT(I)
ST
VA
ST
VA
GT
VA
VA
GT
VA
ST
GT
ST
VA
ST
GT
GT
GT
ST
140
345
350
140
25
140
35
35
16
350
16
140
10,5
410
35
10.5
16
410
ELBOW 90°
Outer – inner
Part No.
Dimensions
Mat
112 307
112 538
C19,445
100 286
C19 462
110 756
112 026
100 119
100 611
100 549
115 813
100 467
110 300
504 045
C38 324
101 552
100 088
110 183
⅛″ NPT(A) – ⅛″ NPT(I)
¼″ NPT(A) – ⅛″ NPT(I)
¼″ NPT(A) – ¼″ NPT(I)
⅜″ NPT(A) – ⅜″ NPT(I)
⅜″ NPT(A) – ⅜″ NPT(I)
⅜″ NPT(A) – ⅜″ NPT(I)
⅜″ NPT(A) – ⅜″ NPT(I)
½″ NPT(A) – ½″ NPT(I)
½″ NPT(A) – ¾″ NPT(I)
¾″ NPT(A) – ¾″ NPT(I)
¾″ NPT(A) – ¾″ NPT(I)
1″ NPT(A) – 1″ NPT(I)
1″ NPT(A) – 1″ NPT(I)
1″ NPT(A) – 1″ NPT(I)
1 ¼″ NPT(A) – 1 ¼″ NPT(I)
1 ½″ NPT(A) – 1 ½″ NPT(I)
2″ NPT(A) – 2″ NPT(I)
2″ NPT(A) – 2″ NPT(I)
ST
ST
GT
GT
ST
VA
VA
GT
GT
GT
VA
GT
ST
VA
ST
GT
GT
VA
21/01/09
Operating
press. bar
11
16
210
21
350
16
16
16
11
16
350
70
410
16
16
16
ST
ST
ST
VA
VA
ST
VA
ST
VA
ST
ST
bar
414
360
350
414
345
586
350
270
ELBOW 45°
Part
No.
Dimensions
Mat
Operating
pressure
bar
113 630
C38,073
113 444
114 030
113 933
116 756
116 755
15J 002
⅛″ NPT(A) – ⅛″ NPT(I)
⅛“ NPT(A) – ⅛“ NPT(A)
¼″ NPT(A) – ¼″ NPT(I)
¼″ NPT(A) – ¼″ NPT(I)
¼″ NPT(A) – ¼″ NPT(I)
⅜″ NPT(A) – ⅜″ NPT(I)
½″ NPT(A) – ½″ NPT(I)
½″ NPT(A) – ½″ NPT(A)
MS
ST
MS
ST
VA
ST
ST
ST
70
680
70
345
345
345
275
414
Inner – inner
Part No.
Mat
Tee
Part No.
Dimensions
Mat
Operating
press. bar
C19,466
104 984
110 290
103 696
100 483
114 526
105 690
102 901
103 475
502 570
166 466
113 833
500 566
106 464
C19 488
113 606
C19 491
⅛″ NPT(I)
¼″ NPT(I)
¼″ NPT(I)
¼″ NPT(I)
⅜″ NPT(I)
⅜″ NPT(I)
⅜″ NPT(I)
⅜″ NPT(I)
½″ NPT(I)
½″ NPT(I)
¾″ NPT(I)
¾″ NPT(I)
1″ NPT(I)
1″ NPT(I)
1 NPT(I)
1″ NPT(I)
1 ¼″ NPT(I)
ST
ST
VA
MS
ST
ST
ST
VA
ST
VA
ST
VA
ST
ST
ST
VA
ST
207
350
350
170
210
330
310
210
310
210
210
70
270
410
10.5
138
Tee
Part No.
Dimensions
Mat
Operating
press. bar
110 440
164 815*
108 638
185 281
113 777
111 928
117 780
517 434
C20 900
⅛″NPT(A), 2x⅛″ NPT(I)
⅛″NPT(A), 2x⅛″ NPT(I)
¼″ NPT(A), 2x ¼″ NPT(I)
¼″ NPT(A), 2x ¼″ NPT(I)
⅜″ NPT(A), 2x ⅜″ NPT(I)
⅜″ NPT(A), 2x ⅜ NPT(I)
½″ NPT(A), 2x ½ NPT(I)
½″ NPT(A), 2x ½ NPT(I)
¾″ NPT(A), 2 x ¾″ NPT(I)
MS
ST
ST
VA
ST
VA
MS
VA
ST
22
410
22 – 12
350
310
70
240
207
Crosspiece
Tee
Part No.
Dimensions
Mat
110 475
106 228
116 504
803 088
108 673
108 126
111 337
⅛″ NPT(I) x ⅛″ NPT(A) x ⅛″ NPT(I)
¼″ NPT(I) x ¼ ″ NPT(A) x ¼″ NPT(I)
¼″ NPT(I) x ¼ ″ NPT(A) x ¼″ NPT(I)
⅜″ NPT(I) x ⅜″ NPT(A) x ⅜″ NPT(I)
⅜″ NPT(I) x ⅜″ NPT(A) x ⅜ ″ NPT(I)
½″ NPT(I) x ½″ NPT(A) x ½″NPT(I)
¾″ NPT(I) x ¾″ NPT(A) x ¾″ NPT(I)
ST
MS
ST
ST
VA
ST
ST
bar
210
345
280
150
Tee
Part No.
Dimensions
Mat
bar
113 264
102 959
110 191
188 033
119 874
C20,432
C20,434
112 168
501 179
¼″ NPT(I)
¼″ NPT(I)
¼″ NPT(I)
⅜″ NPT(I)
⅜“ NPT(I)
½″ NPT(I)
¾″ NPT(I)
¼″NPT(A)x¼″NPT(I)x¼″NPS(A)x¼″NPT
½ NPT(I)
MS
ST
VA
VA
ST
ST
ST
VA
ST
70
140
350
10.5
310
82
82
Bracket 90°
Part No.
Part No.
Dimensions
Mat
Operating
press. bar
113 548
115 219
113 786
116 400
108 066
114 757
3 x ¼″ NPT(A)
3 x ¼″ NPT(A)
3 x ⅜″ NPT(A)
3 x ⅜″ NPT(A)
⅜″ NPT(I), 2 x ⅜″ NPT(A)
3 x ½″ NPT(A)
MS
ST
ST
VA
ST
VA
269
345
11
345
Tee
Part No.
Dimensions
Mat
bar
119 783
¼” NPS(I) x ¼” NPS(I) x ¼” NP(I)
ST
345
Adapter
Part No.
Dimensions
Mat
150 171
159 840
C20 895
156 580
108 415
0500 242
116 393
115 571
150 287
512 351
113 032
159 842
159 841
183 050
150 286
15B 729
156 022
114 499
188 030
104 969
C20 894
164 660
166 044
188 597
⅛″ NPT(A) – ⅛″ NPT(I)
⅛″ NPT(A) – ¼″ NPT(I)
⅛″ NPT(A) – ¼″ NPT(I)
⅛″ NPT(A) – ⅜″ NPT(I)
⅛″ NPT(A) – ⅜″ NPT(I)
¼″ NPT(A) – ¼″ NPT(I)
¼″ NPT(A) – ¼″ NPT(I)
¼″ BSP(A) – ¼″ NPT(I)
¼″ NPT(A) – ⅜″ NPT(I)
¼″ NPT(A) – ⅜″ NPT(I)
¼″ NPT(A) – ½″ NPT(I)
¼″ NPT(A) – ½″ NPT(I)
⅜″ NPT(A) – ¼″ NPT(I)
⅜″ NPT(A) – ¼″ NPT(I)
⅜″ NPT(A) – ⅜″ NPT(I)
⅜″ NPS(A) − ⅜″ NPT(I)
⅜″ NPT(A) – ½″ NPT(I)
½″ NPT(A) – ½″ NPT(I)
⅜″ NPT(A) – ¾″ NPT(I)
½″ NPT(A) – ¾″ NPT(I)
½″ NPT(A) – ¾″ NPT(I)
¾″ NPT(A) – ¾″ NPT(I)
¾″ NPT(A) – ¾″ NPT(I)
¾″ NPS(A) – ¾″
NPT(A)(114)
1″ NPT(A) – 1 ¼″ NPT(I)
ST
ST
VA
ST
VA
ST
ST
VA
ST
VA
MS
ST
ST
VA
ST
ST
ST
VA
VA
ST
ST
ST
VA
ST
112 573
21/01/09
ST
210
Dimensions
100 839
⅛″ NPT(A) – ⅛″ NPT(I)
191 892* ⅛″ NPT(A) – ⅛″ NPT(I) (29.2)
160 701* ⅛″ NPT(A) – ⅛″ NPT(I) (41.3)
C38 441
⅛″ NPT(A) – ¼″ NPT(I)
158 962
⅛” NPT(A) − ¼” NPT(I) (28.6)
103 893
¼″ NPT(A) – ¼″ NPT(I)
100 840
¼″ NPT(A) – ¼″ NPT(I) (25.4)
115 335
¼″ NPT(A) – ¼″ NPT(I) (17-4)
166 866
¼″ NPT(A) – ¼″ NPT(I)
187 357
¼″ NPT(A) – ¼″ NPT(I) (31.75)
162 667
¼″ NPT(A) – ½″ NPT(I)
167 000
⅜″ NPT(I) – ¼″ NPS(A)
164 259
⅜″ NPT(A) – ¼″ NPT(I)
155 699
⅜″ NPT(A) – ⅜″ NPT(I)
196 179
⅜″ NPT(A) – ⅜″ NPT(I)
166 999
½″ NPT(A) – ¼″ NPT(I)
115 764
½″ NPT(A) – ½″ NPT(I)
158 683
½″ NPT(A) – ½″ NPT(I)
166 242
½″ NPT(A) – ½″ NPT(I)
166 590
¾″ NPT(A) – ¾″ NPT(I)
111 386
¾″ NPT(A) – ¾″ NPT(I)
180 180
1 ½″ NPT(A) – 1″ NPT(I)
6878 110 2″ NPT(A) – 1″ NPT(I)
† = electroless nickel plating
Mat
Tight bar
sink.
ST
ST
ST
ST
ST
MS
ST
VA
VA
ST
ST
ST
ST
ST
ST †
ST
ST
ST
VA
ST
VA
ST
VA
45°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
45°
250
248
410
310
80
510
350
350
350
350
350
350
210
510
310
350
35
35
Tight
bar
sinking
30°
30°
30°
30°
30°
30°
30°
30°
30°
350
350
310
350
345
210
550
350
10.5
280
350
280
280
500
280
350
680
276
210
210
30°
*160 701
191 892
Coupling sleeve
Part No.
Dimensions
Mat
Operating
press. bar
100 451
150 278
113 093
110 336
100 083
162 024
161 490
6878 109
158 581
117 627
158 556
100 385
C38 447
112 176
116 649
100 474
116 650
C38 457
⅛″ NPT(I) – ⅛″ NPT(I)
⅛″ NPT(I) – ¼″ NPT(I)
¼″ NPT(I) – ¼″ NPT(I)
¼″ NPT(I) – ¼″ NPT(I)
¼″ NPT(I) – ⅜″ NPT(I)
⅜″ NPT(I) – ⅜″ NPT(I)
⅜″ NPT(I) – ¾″ NPT(I)
⅜″ NPT(I) – ¾″ NPT(I)
½″ NPT(I) – ½″ NPT(I)
½″ NPT(I) – ½″ NPT(I)
½″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – ¾″ NPT (I)
¾″ NPT(I) – ¾″ NPT (I)
¾″ NPT(I) – 1″ NPT(I)
1″ NPT(I) –1″ NPT(I)
1″ NPT(I) –1 ½″ NPT(I)
1 ½″ NPT(I) –1 ¼″ NPT(I)
ST
ST
ST
VA
ST
ST
ST
VA
ST
VA
ST
GT
ST
VA
ST
GT
ST
ST
350
350
350
350
22 – 13
350
210
210
350
410
210
16
410
350
410
210
207
410
Double nipple
Pipe nipple
NPT – JIC 37°
Part No.
111 612
116 150
116 704
119 998
116 703
116 702
116 712
114 337
112 100
117 608
C20 769
116 766
C20 700
C20 703
C20 768
C20 642
C20 595
C20 708
C20 709
C20 647
C20 586
114 868
Dimensions
Mat.
⅛″ NPT(A) – 9/16 -18 UNF #6
⅛″ NPT(A) – ⅝″ 18
¼″ NPT(A) – 9/16 –18 UNF
¼“ NPT(A) – ½ – 20 JIC
¼″ NPT(A) – ¾″– 16 JIC
¼″ NPT(A) – ⅞ – 14 JIC
¼″ NPT(A) – 1 1/16–12 JIC
⅜″ NPT(A) – 9/16″- 18 UNF
⅜″ NPT(A) – 9/16″- 18 UNF
⅜“ NPT(A) – ¾″–16 UNF
⅜″ NPT(A) – ⅞″ – 14
⅜“ NPT(A) – 1-1/16″ –12
½″ NPT(A) – ¾″ –16
½″ NPT(A) – ⅞″ – 14
½″ NPT(A) – ⅞″ – 14
½″ NPT(A) – 1-1/16″ – 12
¾″ NPT(A) – ⅞″ – 14
¾″ NPT(A) – 1-1/16″ –12
¾″ NPT(A) – 1-5/16″ – 12
1″ NPT(A) – 1-1/16″ – 12
1″ NPT(A) – 1-5/16″ – 12
1″ NPT(A) – 1-⅝″ – 12
ST
MS
ST
ST
ST
ST
VA
ST
VA
ST
ST
ST
ST
ST
MS
ST
ST
ST
ST
ST
ST
ST
Conical
nipple
37°
45°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37
Oper.
press
bar
228
345
345
345
345
345
345
310
275
275
240
240
240
345
Part
No.
Dimensions
Length
(mm)
Mat
151 249
503 869
100 628
100 124
100 200
100 992
100 213
100 195
111 478
100 122
101 353
100 627
101 407
C19 614
513 507
100 485
114 508
⅛″ NPT(A)
¼“ NPT(A)
¼″ NPT(A)
¼″ NPT(A)
¼″ NPT(A)
⅜″ NPT(A)
⅜″ NPT(A)
⅜″ NPT(A)
⅜″ NPT(A)
½″ NPT(A)
½″ NPT(A)
¾″ NPT(A)
¾″ NPT(A)
¾″ NPT(A)
¾″ NPT(A)
1″ NPT(A)
1″ NPT(A)
63.5
50.8
54
63.5
152
63.5
76
102
238
28.5
102
50.8
76
102
178
50.8
178
ST
VA
ST
ST
ST
ST
ST
ST
VA
ST
ST
ST
ST
ST
VA
ST
ST
Operating
press. bar
150
10.5
10.5
10.5
10.5
21
21
10.5
90
10.5
10.5
10.5
10.5
45
Plug
Elbow 45°
JIC 37º
Outer – outer
NPT – JIC 37°
Part No.
Dimensions
Mat.
C20,654
C20 972
C20 655
C20 665
C20 666
C20 651
C20 635
C20 650
⅜″ NPT(A) – 9/16″ – 14
½″ NPT(A) – ¾″ – 16
½″ NPT(A) – ⅞″ – 14
¾″ NPT(A) – ⅞″ – 14
¾″ NPT(A) – 1-1/16″ –12
¾″ NPT(A) – 1 5/16 – 12
1″ NPT(A) – 1-1/16 ″– 12
1″ NPT(A) – 1-5/16″ – 12
ST
ST
ST
ST
ST
ST
ST
ST
Conical
nipple
37°
37°
37°
37°
37°
37°
37°
37°
.
press.
bar
345
345
345
155
240
Part No.
Dimensions
Key
size
Mat.
103 147
116 134
104 765
110 208
100 721
101 970
101 754
101 748
100 361
103 778
102 726
113 989
112 183
113 991
1/16” NPT(A) – hexagon socket
1/16” NPT(A) – hexagon socket
⅛” NPT(A) – hexagon socket
⅛” NPT(A) – hexagon socket
¼” NPT(A) – Hexagon socket
¼” NPT(A) – Hexagon socket
⅜” NPT(A) – Hexagon socket
⅜” NPT(A) – Hexagon socket
½” NPT(A) – Hexagon socket
½” NPT(A) – Hexagon socket
¾” NPT(A) – Hexagon socket
¾” BSP(A) – Hexagon socket
1” NPT(A) – Hexagon socket
1” BSP(A) – Hexagon socket
5/32″
5/32″
3/16″
3/16″
¼″
17/64″
5/16″
5/16″
⅜″
⅜″
9/16″
12 mm
⅝″
17 mm
ST
VA
ST
VA
ST
VA
ST
VA
ST
VA
ST
ST
ST
ST
Elbow 90°
NPT – JIC 37°
JIC 37º
JIC 37º
Part No.
Dimensions
Mat.
C20,676
C20 670
C20 677
C20 678
C20 679
C38 006
C20 687
C20 681
C20 694
C20 690
C20 686
¼″ NPT(A) – 9/11″ –18
⅜″ NPT(A) – 9/16″ – 18
⅜″ NPT(A) – ¾″ – 16
½″ NPT(A) – ¾″ 16
½″ NPT(A) – ⅞″ – 14
½″ NPT(A) – 1-1/16″ – 12
¾″ NPT(A) – ⅞″ – 14
¾″ NPT(A) – 1 1/16 – 12
1″ NPT(A) – 1-1/16″ – 12
¾″ NPT(A) – 1-5/16″ – 12
1″ NPT(A) – 1-5/16″ – 12
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
Conical
nipple
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
37°
Oper.
press.
bar
345
345
345
345
276
240
345
276
240
241
Reducing nipple
37° conical nipple
Part No.
117 502
117 677
Dimensions
¾“–16(I) #8 − ½“–20(A) #5
⅞“–14(I) #10 − 9/16“–18(A) #6
21/01/09
JIC 37º
Plug
Part No.
Dimensions
Key
Pump
100 403
⅛” NPT(A) – External square
9/32″
107 570
⅛” NPT(A) – External square
9/32″
100 509
¼” NPT(A) – External square
⅜″
111 697
¼” NPT(A) – External square
⅜″
100 040
⅜” NPT(A) – External square
7/16″
110 740
⅜” NPT(A) – External square
11/16″
100 737
½” NPT(A) – External square
9/16″
104 663
¾” NPT(A) – External square
⅝″
103 943
¾” NPT(A) – External square
⅝″
100 345
1” NPT(A) – External square
13/16″
113 561
⅝″
100 346
1 ½” NPT(A) – External square
1 ⅛″
102 042
1 5/16″
103 936
1 5/16″
103 219
⅛” NPT(A) – Flat screwdriver
GT = Malleable cast iron only for low pressure
Mat. Op. press. bar
ST 345
ST 345
22 – 14
Mat.
ST
VA
ST
VA
ST
VA
ST
ST
VA
GT
VA
GT
GT
VA
MS
Insert, hose/hose insert
Screw connection – Celcon – Acetal
Part No.
Dimensions
111 811
111 864
⅜“ NPT(A) for ¼“ hose
⅜“ NPT(A) for ½“ hose
Part No.
Dimensions
117 426
Insert ½“ O.D. plastic hose
Screw connection, stainless steel
Screw connection – Celcon – Acetal
90°
Part No.
Dimensions
111 808
⅜“ NPT(A) for ⅝“ hose
Part No.
Dimensions
513 308
513 697
115 449
117 344
¼“ NPT(A) − ⅜“ O.D. hose
G ¼“(A) conical ISO – ⅜“ O.D. hose
⅜“ NPT(A) − ⅝“O.D. hose, union nut steel
½“ NPT(A) – ⅝“ O.D. hose
90°
Tube connection – Celcon – Acetel
Part No.
Dimensions
111 863
15.875 ⅝“ O.D. hose to 12.7 ½“ O.D. hose
Screw connection – nylon
Part No.
Dimensions
513 816
510 223
15E 272
15E 273
G⅛“ ISO 228(I) − ¼“ hose
¼“ NPT(A) − ⅜“ hose
½“ NPT(A) – ⅝“ hose
⅜“ NPT(I) − ⅝“ hose
90°
90°
Part No.
Dimensions
Part No.
Dimensions
113 521
¼“ NPT(A) − ⅜“ O.D. 9.525 mm hose
114 119
⅜“ O.D. − ⅜“ O.D. hose
Tube connection, polypropylene
Ferrule, stainless steel
Part No.
Dimensions
Part No.
Dimensions
116 316
½“ NPT(A) – ½“ O.D. 12.7 hose
513 987
513 979
513 988
513 980
¼“ SST, front ferrule
¼“ SST, rear ferrule
⅜“ SST, front ferrule
⅜“ SST, rear ferrule
Tube connection, polypropylene
90°
Coupling Nut
Part No.
Dimensions
116 314
117 423
117 424
⅜“ NPT(A) – ¼“ O.D. 6.3 mm hose
½“ NPT(A) – ½“ O.D. 12.7 mm hose
½“ NPT(I) – ½“ O.D. 12.7 mm hose
Part No.
Dimensions
513 972
Coupling nut ⅜“ SST, ⅜“ O.D. hose
Screw connection, galvanised steel
Tube connection, tee polypropylene
Part No.
Dimensions
117 425
3 x ½“ O.D. –12.7 mm hose
21/01/09
22 – 15
Part No.
Dimensions
bar
198 465
1“ NPT(A) x Ø 30 hose
400
Ball valves
Ball valves
Manual 307 068
Part No. Dimensions
Mat
Operating
press. bar
208 390
208 393
218 109
208 391
208 392
208 475
208 476
208 630
¼″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ⅜″ NPS(A)
⅜″ NPT(A) – ⅜″ NPT(I)
⅜″ NPT(I) – ¼″ NPT(A)
⅜″ NPT(I) – ¼″ NPS(A)
⅜″ NPT(I) – ⅜″ NPS(A)
⅜″ NPT(I) – ½″ NPT(A)
ST-VI
ST-VI
ST-VI
ST-VI
ST-VI
ST-VI
ST-VI
ST-VI
35
35
35
35
35
35
35
35
237 528
237 529
237 530
237 531
237 533
237 532
237 534
237 535
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ⅜″ NPS(A)
⅜″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ⅜″ NPT(A)
⅜″ NPS(A) – ⅜″ NPT(A)
⅜″ NPT(I) – ⅜″ NPT(I)
⅜″ NPT(I) – ⅜″ NPT(A)
⅜″ NPT(I) – ⅜″ NPS(A)
VA-TE
VA-TE
VA-TE
VA-TE
VA-TE
VA-TE
VA-TE
VA-TE
35
35
35
35
35
35
35
35
Part No.
Dimensions
Mat
Operating
press. bar
512 148
512 149
512 150
512 151
512 152
512 212
512 213
¼″ NPT(I) – ¼″ NPT(I)
⅜″ NPT(I) – ⅜″NPT(I)
½″ NPT(I) – ½″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
1″ NPT(I) – 1″ NPT(I)
1 ½″ NPT(I) – 1 ½″ NPT(I)
2″ NPT(I) – 2″ NPT(I)
ST-TE
ST-TE
ST-TE
ST-TE
ST-TE
ST-TE
ST-TE
138
138
138
138
138
138
138
512 482
512 483
512 484
512 485
512 486
¼″ NPT(I) – ¼″ NPT(I)
½″ NPT(I) – ½″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
1″ NPT(I) – 1″ NPT(I)
VA-TE
VA-TE
VA-TE
VA-TE
VA-TE
138
138
138
138
138
Ball valves
Ball valves
Manual 306 861
Part No. Dimensions
Mat
Operating
press. bar
Part No.
Dimensions
Mat
Operating
press. bar
210 657
214 037
237 303
239 018
210 659
235 992
223 959
210 658
238 612
223 960
237 304
238 967
223 522
ST-VI
ST-TE
ST-PEEK
VA-TEI
ST-VI
VA-TE
ST-TE
ST-VI
ST-VI
ST-TE
ST-PEEK
VA-PEEK
VA-TE
350
350
510
350
350
350
350
350
350
350
510
350
350
C07 048
C07 063
½″ NPT(I) – ½″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
ST-VI-AC
ST-VI-AC
345
345
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ¼″ NPT(A)
¼” NPT(A) On one side
Manifold 90°
Ball valves
Part No.
Dimensions
Mat
bar
160 878
177 088
6773 301
188 600
189 986
166 998
113 927
166 444
¼″ NPT(I) – ¼″ NPS(I) – ⅛″(I) front
⅜″ NPT(I) – ⅜″ NPS(I) – ⅛″(I) side
⅜″ NPT(I) – ⅜″ NPS(I) – ¼″(I) front
¾″ NPT(A) – ¾″ NPS(I) – ¼″(I) side
¾″ NPT(A) – ¾″ NPS(I) – ⅛″(I) side
¾″ NPT(I) – ¾″ NPS(I) – ¼″(I) front
¾″ NPT(I) – ¾″ NPS(I) – ¼″(I) front
1″ NPT(A) 90°, 2 x ⅜″ NPT(I) side
ST
ST
ST
ST
ST
ST
VA
MS
350
275
275
280
155
280
280
140
ST
345
Distribution
manifold
Manual 306 861
Part No. Dimensions
Mat
Operating
press. bar
214 711
113 834
114 189
117 366
ST-VI
VA-TE
VA-TE
MS-TE
350
350
105
28
¼″ NPT(A) three-way valve
¼″ NPT(A) three-way valve
⅜″ NPT(A) three-way valve
1 ¼″ NPT(I) three-way valve
158 990
2 x ½“ NPT(I), 4x ⅜“NPT(I)
“Y” manifold
O.D. Ø 47.6 mm
Ball valves
Part No.
Dimensions
Mat
bar
194 205
3 x ⅜″NPT(I)
ST
228
Drain valve
Part No.
Dimensions
Mat
Operating
press. bar
114 363
75601 006002
114 354
102 646
117 325
102 644
108 537
521 477
118 854
G⅜″(I) x G⅜″(A) DN10
½″ NPT(I) – ½″ NPT(I)
½″ NPT(I) – ½″ NPT(I)
G¾″(I) x G¾″(A) DN16
¾″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
1″ NPT(I) – 1″ NPT(I)
1 ¼″ NPT(I) – 1″
¼″NPT(I)
VA-TE
ST-VI
VA-TE
ST-NY
ST-VI
ST-NY
ST-TE
ST-VI
ST-VI
55
500
345
210
25
210
138
345
345
21/01/09
22 – 16
Part No.
Dimensions
Mat
bar
224 774
Inlet outlet ⅛“NPT(I)
ST-CA-VI
345
AIR FITTINGS
Ball valves
Ball valves short lever
(A) inlet
(A) outlet
With bleed-type
Part No. Dimensions
Pump
Operating
press. bar
113 329
113 331
113 332
113 163
113 333
113 269
113 218
Fast-Flo
President, Glutton
Senator, Bulldog, King
Premier
Monark, President
Bulldog, President
17
17
17
17
17
17
17
¼″ (I)
½″ (I)
¾″ (I)
1″ (I)
⅜″ (I x A)
½″ (I x A)
¾″ (I x A)
With bleed-type
Part No. Dimensi
ons
Pump
Operating
press. bar
110 223
110 224
110 225
110 226
107 142
Fast-Flo
Monark, Fire-Ball
President, Glutton
Bulldogs
17
17
17
17
17
¼″ (I)
⅜″ (I)
½″ (I)
¾″ (I)
½″ (I x A)
Ball valve − Mini
Fluid Pressure Relief Valve
AIR
Part No.
Dimensions
Mat.
Operating
press. bar
214 691
115 288
110 065
108 124
098 074
116 643
098 075
103 347
113 498
098 078
113 769
113 916
098 080
⅛″ (A)
⅛″ (A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
¼″(A)
⅜″(A)
⅜″(A)
¼″(A)
Alu
MS
MS
MS
MS
MS
MS
MS
MS
MS
MS
MS
MS
3.5
5.15
4
5.2
5.8
6.2
6.3
7.0
7.7
8.4
8.6
10.5
12.5
Part No.
Dimensions
Operating
press. bar
15B 565
¼″ NPT(I x A)
41
Air needle valves
O ring Buna-N
¼” NPT
1/8” NPT
1/8” NPT
205 528
206 264
1/8” NPT
Hose barbed fitting
¼”NPSM
1/8” NPT
203 743
¼” NPSM
205 090
Part No.
Dimensions
Mat.
116 691
114 287
M70809
183 575
102 550
113 607
198 119
115 508
⅛″ NPT(A) x 4.57 mm I.D. hose/hose
⅛″ NPT(A) x ¼″ connector I.D. hose/hose
¼” NPT(A) x ¼” connector
⅜” NPT(A) x ½” connector
¾” NPT(A) x ¾” connector
1” NPT(A) x 1” connector
1″ NPT(I) x 1″ connector, 90°
1″ NPT(I) short x 1″ connector, 90°
MS
MS
MS
ST
NY
VA
ST
ST
Part No.
Dimensions
205 528
202 233
205 090
206 264
203 743
⅛″ (I) x ⅛″(A)
⅛″ (I) x ¼″ (A)
¼″(I) x ¼″(A)
¼″(A) x ⅛″(I)
⅛″(I) x ⅛″(A)
With lock nut
Air Line Quick-disconnect
Manifold, air
Part No.
inlet
Outlet
Mat.
171 992
177 117
191 550
180 916
15E 145
Inlet ⅜″
Inlet ½”
½″ NPT(A)
¾″ NPT(I)
¾″ NPT(I)
Inlet ⅜” (A) Two ⅛” NPT(I)
Five ½”
½″ NPT(A) – to the side ¼″ NPT(I)
¾″ NPT(A) – to the side ¼″ NPS(I)
¾″NPT(I) to the side 3 x ⅜“ NPT(I)
ST
ST
ST
ST
ST
Air manifold 90°
Part No. Inlet outlet
Additional outlet
Mat.
161 262
207 438
162 376
206 205
¼″ NPT
1 x ⅛″ NPT(I)
3 X ⅛″ NPT(I)
¼″ NPT & ⅛″ NPT
ST
ST
ST
ST
¼″ NPT & ⅛″ NPT
ST
⅛″ NPT(I)
ST
207 675
189 986
½″ NPT(A) ½″ NPSM(I)
½″ NPT(A) ½″ NPS(I)
½″ NPT(A x I)
¾″ NPSM(I) x ½″ NPT(A)
Bulldog
¾″ NPT(I) x ¾″ NPT(A)
King
¾″ NPT(A) x ¾″ NPS(I)
21/01/09
Part No.
Dimensions
208 536
110 198
110 199
110 200
¼″ NPT(I)
⅜″ NPT(I)
½″ NPT(I)
¾″ NPT(I)
Male coupling
Part No.
Dimensions
169 969
169 970
169 967
169 971
110 196
110 197
⅛″ NPT(A)
¼″ NPT(A)
¼″ NPT(I)
⅜″ NPT(A)
½″ NPT(A)
¾″ NPT(A)
Coupler air line
22 – 17
Part No.
Dimensions
113 429
113 430
Coupling half ¾″ NPT(A)
Coupling half ¾″ NPT(I)
Fluid – needle valves
108 233
098 260
114 451
202 869
103 067
Part No.
Dimensions
Mat.
Operating
press. bar
108 233
098 260
114 451
202 869
103 067
¼″ (A) x ¼″(A) NPT
¼″ (I) x ¼″(I) BSP
¼″ (A) x ¼″(A) NPT
½″ (I) x ½″(I) NPT
¼″ (A) x ¼″(I) NPT
ST – PTFE
VA – PTFE
ST – PTFE
ST – leather
MS – PTFE
345
400
510
345
345
Ball Check Valves
114 317
501 951
501 867
501 684
106 243
Part No.
102 717
206 831
114 243
949 709
949 710
220 179
235 132
6773 150
203 916
246 929
114 317501 951-°
106 495-°
114 378
102 717+°
552 137+°
501 867-°
114 243-°
206 831+
206 962+
949 709+°
949 710+°
501 684206 833+
501 603115 032+°
235 132+
6773 150-°
220 179+°
C59,546
203 916+°
C07 070
521 850-°
246 929+
Part No.
239 663
202 577
Rep-Kit
207 839
223 342
239 394
21/01/09
⅛″ NPT(A) – ⅛″ NPT(A)
⅛″ NPT(A) – ⅛″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
¼″ NPT(A) – ¼″ NPT(A)
⅜″ NPT(A) – ⅜″ NPS(I)
⅜″ NPT(A) – ⅜″ NPS(A) 90°
½″ NPT(A) – ½″ NPT(A)
½″ NPT(I) – ½″ NPT(I)
¾″ NPT(A) – ¾″ NPT(I)
¾″ BSP(I) – ¾″ BSP(I)
¾″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – ¾″ NPT(I)
¾″ NPT(I) – 1″ NPT(I) 90°
1″ NPT(I) – 1″ NPT(I)
1 ¼″ NPT(I) – 1 ¼″ NPT(I)
1 ¼″ NPT(A) – 1 ¼″ NPT(I)
+ = Ball check valve
* = Kalrez
Opening
Mat
press. in bar
Oper.
press.
bar
0.21
0.27 – 0.35
0.07
0.07 – 0.17
VA–TE
VA–TE
MS – VI
MS–MS
VA – VI
0.27 – 0.35
0.27 – 0.35
0.03
3.5
7.0
0.27 – 0.35
0.27 – 0.35
-
VA – KAL*
55
210
17.5
140
410
210
210
14
210
210
210
210
210
210
210
350
350
500
280
345
500
350
350
345
VA–TE
ST
ST
ST
ST
ST
VA–TE
ST
VA–TE
ST
ST
ST-Nitrile
ST
0.2 – 0.55
VA
ST
ST
ST
ST
- = plate check valve
° = spring loaded
Swivel
115 032
C07 070
521 850
C50 239
C57 733
C33 242
Dimensions
106 243
Dimensions
I.D.
mm
Mat.
O. P. Working
bar
manual
⅛″ NPT(A) – ¼″ NPT(I) Z 2.76 ST leather
202 579
560
204 083
¼″ NPT(A) – ⅛″ NPT(I)
2.76 ST leather
560
306 708
204 084
¼″ NPT(A) – ¼″ NPT(I)
2.76 ST leather
560
306 708
239 663
¼″ NPT(A) – ¼″ NPS(I)
2.76 ST leather
250
306 861
223 341
¼″ NPT(A) – ¼″ NPS(I)
2.76 ST-PTFE
250
306 861
189 018† ¼″ NPS(A) – ¼″ NPS(I)
3.9
VA-PTFE
517
115 898‡ ¼″ NPS(A) – ¼″ NPS(I)
4.10 VA-PTFE
400
239 394* ¼″ NPS(A) – ¼″ NPS(I)
3.5
VA-PTFE
400
236 987
¼″ NPS(A) – ¼″ NPS(I)
4.8
VA-PTFE
510
306 861
¼″ NPT(A) – ¼″ NPT(I) Z 2.76 ST leather
202 577
450
¼″ NPT(A) – ¼″ NPT(I) Z 2.76 ST-PTFE
223 340
480
214 925
⅜″ NPT(I) – ¼″ NPS(I)
6.35 ST leather
350
306 861
214 926
⅜″ NPT(I) – ½″ NPS(I)
6.35 ST leather
350
306 861
ST-AFLAS-PTFE
C57,733
⅜″ NPT(I) – ⅜″ NPS(I)
13.5
345
ST-AFLAS-PTFE
C33,242
½″ NPT(I) – ⅜″ NPS(I)
13.5
345
C50,239
½″ NPT(I) – ½″ NPT(I)
13.5 ST-Viton
345
207 947
½″ NPT(I) – ½″ NPT(A)
7.93 ST-Polyurethane 420
307 005
196 337
½″ NPT(I) – ½″ NPT(A)
7.93 ST-PTFE
420
307 005
½″ NPT(A) – ½″ NPT(I) Z 6.25 ST Polyurethane 420
207 948
307 005
207 946
½″ NPT(I) – ⅜″ NPT(I)
7.93
STPolyurethane 420
307 005
203 844
¾″ NPS(A) – ¾″ NPT(I)
12.7 ST-Buna-N
70
C20,838
¾″ NPT(I) – ¾″ NPT(A)
16.0 ST-Viton
345
Z = Z joint
† = Torque 4 IN LB non-loaded, 50.8 mm long
* = Contains an edge filter
‡ = Torque 1 IN LB non-loaded, 46 mm long
22 – 18
HOSE FITTINGS – NIPPLES
Union swivel
103 605
104 412
239 629, 111 913
239 630, 111 914
104 641
Press fittings
Union swivel max. 70 bar I.D. ¼“ NPT(I)
O.D. thread ¾“-20 UNEF-2A Ø19 mm
WVB hose fitting
Part No.
Dimensions
Mat.
Hose
6712 805
6712 800
6712 668
6712 669
6712 670
6712 672
6712 673
6712 674
6712 675
6712 778
6712 801
¼″ NPS(I)
¼″ NPS(I)
¼″ NPS(I)
¼″ NPS(A)
¼″ NPS(I)
⅜″ NPS(I)
⅜″ NPS(A)
⅜″ NPS(I)
⅜″ NPS(A)
½″ NPS(I)
½″ NPS(I)
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
ST
6877 554
6877 550
6877 551
6877 551
6877 558
6877 552
6877 552
6877 556
6877 556
6877 557
6877 553
Plug-in nipple
90°
Part No.
Dimensions
Hose/hose
109 193
10 – 32 UNF– 5/32″ OD 3.968 mm
598 140
⅛″ NPT(A) − 5/32″ OD 3.968
111 162
⅛″ NPT(A) – ¼″ OD
6.35 mm
111 225
⅛″ NPT(A) – ⅜″ OD
9.525 mm
115 949* ¼″ NPT(A) – 5/32″ OD 3.968 mm
C19,391
¼″ NPT(A) – ¼″ OD
115 948* ¼″ NPT(A) – 5/16″ OD 7.94 mm
115 841
¼“ NPT(A) – ⅜“ OD
9.525 mm
C38,211
½″ NPT(A) – ⅜″ OD
* with Viton o ring for higher temperature
598 095
598 095
054 130
½″ O.D.
3 X 5/32 O.D.
3 X ¼″ O.D.
061-135
061 345
061 345
061 132
061 132
061 132
061 132
061 132
061 134
061 204
061 204
061 205
061 205
061 393
061 393
061 195
061 195
MS
Ferrule
104 412
104 412
104 412
104 412
104 413
Straight
Plug-in tee
113 278
112 739
Hose
MS
SST(304)
SST(304)
MS
MS
MS
SST(304)
SST(304)
MS
MS
MS
MS
MS
MS
054 118
90°
113 278
Mat.
Plug-in nipple
Plug-in nipple, double
114 157
Dimensions
206 020
¼″ NPS(I)
239 629* ⅜″ NPS(I)
239 630* ⅜″ NPS(A)
205 437
⅛″ NPT(A)
205 447
¼″ NPS(I)
205 448
⅜″ NPS(I)
111 913* ¼″ NPS(I)
111 914* ⅜″ NPS(I)
205 439
⅜″ NPS(I)
104 415
¼″ NPS(I)
104 084
⅜″ NPS(I)
104 415
¼″ NPS(I)
104 084
⅜″ NPS(I)
6773 017 R ¼″ BSP(I)
103 605
¼″ NPS(I)
6773 021 R⅜″ BSP(I)
104 414
⅜″ NPS(I)
= spring guard
Part No.
112 739
054 172
Part No.
Dimensions
114 332
114 263
115 671
108 982
113 058
C19 407
C19 413
114 320
114 471
114 112
115 950
112 790
114 991
114 129
114 111
10-32 UNF – ¼″OD
⅛″ NPT(A) – 5/32″ OD
⅛″ NPT(A) – ¼″ OD
⅛″ NPT(A) – ⅜″ OD
¼″ NPT(A) – 5/32″ OD
¼″ NPT(A) – ¼″ OD
¼″ NPT(A) – ⅜″ OD
⅛″ NPT(I) – ¼″ OD
¼″ NPT(I) – 5/32″ OD
¼″ NPT(I) – ¼″ OD
¼″ NPT(A) – 5/16″ OD
¼″ NPT(I) – ⅜″ OD
¼″ BSP(A) – 10.0 mm
⅜″ NPT(A) – ½″ OD
½″ NPT(A) – ½″ OD
Hose/hose
3.968 mm
6.35 mm
9.525 mm
3.968 mm
6.35 mm
9.525 mm
598 095
054 130
054 118
C12 508
3.968 mm
6.35 mm
7.94 mm 054 776
9.525 mm 054 106
12.7 mm 061 134
12.7 mm 061 134
Plug-in tee
Plug-in nipple – SWIVEL
90°
C20,359
⅜″ NPT(A) – 2 x ⅜″ O.D.
Y plug-in adapter
198 175
114 158
Y plug-in adapter 4 mm
Y plug-in adapter 6.25 mm
Connector
115 743
Connector ⅜“ to ¼“ nylon hose
Plug-in bung
113 279
9.525 mm
Part No.
Dimensions Mat.
114 151
114 469
112 698
114 109
111 225
C19 395
114 316
114 114
114 110
114 128
114 153
⅛″ NPT(A) – 5/32″ OD
¼″ NPT(A) – 5/32″ OD
⅛″ NPT(A) – ¼″ OD
¼″ NPT(A) – ¼″ OD
⅛″ NPT(A) – ⅜″ OD
¼″ NPT(A) – ⅜″ OD
⅜″ NPT(A) – ⅜″ OD
⅜″ NPT(A) – ½″ OD
½″ NPT(A) – ½″ OD
¼″ NPT(A) – ½″ OD
⅜″ NPT(A) – ¼″ OD
Hose/hose
061 134
054 760
Plug-in tee
Plug-in bung for 5/32 nylon hose
21/01/09
Part No.
Dimensions Mat.
C38,157
114 130
¼″ NPT(A) – 2 x ⅜″OD 9.525 mm
¼″ NPT(A) – 2 x ½″OD 12.7 mm
22 – 19
Hose
TIPS FOR AIRLESS AND AIR-ASSISTED AIRLESS
GRACO offers a large range of precision-manufactured tips for the most varied application. Standard tips, FF fine spraying tips and
self-cleaning tips – all have a tungsten carbide core for a long service life. The orifice ground with a diamond disk provides a precise,
shadowfree spraying patter with soft edge zone.
Airless Spraying tips for multi-purpose use
Standard Tip
163-xxx,
odd part no.
Guard see page 23-8
Standard Tips (163-xxx, odd part no.)
5000 psi (345 bar)
Graco`s universal standard-airless-tips fit the airless spraying guns of the most manufactures.
A wide range of the most varied tips, spraying widths and fluid flow rates is available.
Fine Finish Airless Spray Tips (163-xxx, even part no.) 3000 psi (210 bar)
Fine spray tips are double tips, i.e. a pre atomizer tip is inserted in front of the spraying tip witch already
breaks up the fluid before it is atomized into extremely fine particles in the second tip. This produces an
especially soft, shadofree spraying pattern. FF fine spraying tips are used for applications where highquality paint work is especially important, e.g. in the furniture and leather industry or in automobile paint
shops. They fit the airless spraying guns of most manufacturers. (only for Silver Gun)
FF- Tip 163-xxx, even part no.
165 397 Tip retainer
164 769 PTFE gasket
Guard see page 23-8
RAC Reversible Tip
1. RAC V Reversible Tip:
NEW
262-xxx - (old 286-xxx) (black)
/ only the number changed
LL5-xxx (yellow)
/ LineLazer
TMX-xxx
/ filler
A quick-change tip is inserted in the RAC V which also functions as a tool to install the metal or
plastic seat. The RAC V has an aerodynamic design, which ensures a uniform spraying pattern and
prevents paint deposits at the guard. All metal parts consist of stainless steel and have anti-corrosion
protection. If the tip is blocked it can be turned through 180° whit an arrow shaped lever. A short pull
on the gun is immediately ready for spraying again. The maximum operating pressure is 280 bar.
Colour of the guard RAC V: Orange
Part
Part
Part
Part
no.
no.
no.
no.
243 161 without
243 470 without
243 263 without
243 789 without
tip,
tip,
tip,
tip,
RAC V
5 Pieces kit 243 281
thread 7/8″-14 UNC (f)
thread M18 x1 (f)
thread 11/16″ (f)
thread M18 x 1,5(f)
incl. 5x Seat 195 558
incl. 5x Gasket 115 524
RAC X ReversibleTip:
FFT -xxx
LTX-xxx
WA-12xx
-
Fine Finish
Latex
Wide RAC,
FFA-xxx
PAA-xxx
HDA-xxx
-
Fine Finish
(green) 0,008” – 0,014”
Professional airless
(blue) 0,015” – 0,025”
Heavy Duty and texture (brown) 0,027” – 0,071”
-
(green)
(blue)
(blue)
G15/G40
AA
This tips don’t fit in RAC V !!!
The tips are in tungsten carbide. The maximum operating pressure is 280 bar
RAC X
Colour of the guard RAC X: Blue
Part
Part
Part
Part
no.
no.
no.
no.
246 215 without tip, thread 7/8″- 14 UNC (f)
246 437 without tip, thread 11/16″ (f)
246 770 without tip, thread M18 x 1 (f)
288 465 without tip, thread 1-1/4” 18UNF-2B for G40 AA
incl. 5x Seat
15A 981
incl. 5x Gasket 15A 978
RAC X
RAC X (Solvent)
incl. 5x Seat 15A 981
incl. 5x Gasket 15E 557
2. XHD - Reversible Tip:
XHD -xxx
-
Heavy Duty RAC
(grey)
Colour of the guard XHD001 (old was GHD – RAC) : grey
Part no. XHD 001 without tip, thread 7/8″ – 14 UNC (f)
The old and the new guards and tips are compatible!!!
The maximum operating pressure = 500 bar
09/09/2008 15:01
23-1
XHD
5 Pieces kit XHD010
incl. 5x Seat 15K 880*
incl. 5x Gasket 15R 420*
*not sold separately
SPECIAL AIRLESS SPRAYING TIPS
1. RAC Fine Finish for Reversible switch (FFT-xxx) even !!!
Tip with pre atomizer tip like 163 xxx however with reversible switch for quick cleaning.
Used with reversing switch RAC X
2. RAC LineLazer Airless Tip (LL5-xxx)
Used with reversing switch RAC V (243 161)
3. Adjustable Airless Spray Tips
4. Airless Automatic Tips (GG0-xxx)
For Robot and automatic applications, standard tips with part No. GGO-XXX can be supplied with smaller spray
pattern width tolerance. A standard Tip, e.g. 163217, has a spray width of 100-150 mm at a distance of 300 mm.
An Airless automatic tip, GGO217, has a spray width of 100-115 mm at a distance of 300 mm.
See manual 308813 for automatic airless guns and tip table for available GGOXXX tips.
AIR-ASSISTED AIRLESS SPRAYING TIPS (AA)
1. AAM-xxx - Fine Finish-tips
Fine Finish Tip, develop for a more efficient atomization.
Especially for wood applications that requires of superior finish quality.
For gun G15 only size to 0,021“ 0,53 mm
For gun G40 and G40 Automatic all size
AAM-xxx
Gasket
No. 183 616
(UHMWPE)
Strainer
241 804
2. GG4-xxx - manufacturing Tips (successor AAM-xxx)
Fine Finish Tip, for a better atomization with high solid fluids
(GG4 used with Alpha Plus AA gun).
note: GG4-xxx fit in new G15-G40 gun (AAM-xxx)
GG4-xxx
3. AA RAC V Tips 262-xxx (old 286-xxx before 242-xxx)
AA Reverse – A – Clean Spray Tip quick clean turning function.
To reduce downtime caused by frequent plugging.
For guns: Contractor / FTX
note:
262-xxx RAC V
286-xxx RAC V (USA)
242-xxx RAC V (old)
4. AAP-xxx Standard AA Automatic Spray tips
(predecessor GG5-xxx)
For automatic finishing application requiring high finish quality
Gasket
183 616
(UHMWPE)
5. Electrostatic Air-Assisted Airless Spray tips (GG3-xxx)
For AA200HS & Pro AA 4500
For Pro Xs Guns see 309 419
09/09/2008 15:01
23-2
AAP-xxx
< Ø 0,013“
Strainer
241 804
AIRLESS SPRAYING TIPS FOR MULTI-PURPOSE USE
0.28 mm
.011″
010028
020028
030028
040028
050028
060028
070028
0.33 mm
.013″
010033
020033
030033
040033
050033
060033
070033
080033
0.38 mm
.015″
010038
020038
030038
040038
050038
060038
070038
080038
0.43 mm
.017″
010043
020043
030043
040043
050043
060043
070043
080043
090043
0.48 mm
.019″
010048
020048
030048
040048
050048
060048
070048
080048
090048
mm
0.189
50-100
100-150
150-200
200-250
163-107
163-207
163-307
---
XHD-107
--XHD-307
---
--262-207
262-307
---
163-109
163-209
163-309
163-409
163-509
163-609
XHD-109
XHD-209
XHD-309
XHD-409
XHD-509
XHD-609
262-109
262-209
262-309
262-409
262-509
262-609
mm
0.303
50-100
100-150
150-200
200-250
250-300
300-350
mm
0.454
50-100
100-150
150-200
200-250
250-300
300-350
350-400
163-111
163-211
163-311
163-411
163-511
163-611
163-711
XHD-111
XHD-211
XHD-311
XHD-411
XHD-511
XHD-611
XHD-711
262-111
262-211
262-311
262-411
262-511
262-611
---
163-113
163-213
163-313
163-413
163-513
163-613
163-713
163-813
XHD-113
XHD-213
XHD-313
XHD-413
XHD-513
XHD-613
XHD-713
XHD-813
262-113
262-213
262-313
262-413
262-513
262-613
-----
Spray pattern-
* lowviscous with/mm at
fluid distance of
300mm from
the object
** highviscous
fluid
0.53 mm
.021″
100538
020053
030053
040053
050053
060053
070053
080053
090053
163-121
163-221
163-321
163-421
163-521
163-621
163-721
163-821
163-921
XHD-121
XHD-221
XHD-321
XHD-421
XHD-521
XHD-621
XHD-721
XHD-821
---
262-121
262-221
262-321
262-421
262-521
262-621
262-721
262-821
---
163-223
163-323
163-423
163-523
163-623
163-723
163-823
163-923
--XHD-323
XHD-423
XHD-523
XHD-623
XHD-723
XHD-823
XHD-923
262-223
262-323
262-423
262-523
262-623
262-723
-----
163-225
163-325
163-425
163-525
163-625
163-725
163-825
163-925
XHD-225
XHD-325
XHD-425
XHD-525
XHD-625
XHD-725
XHD-825
---
262-225
262-325
262-425
262-525
262-625
262-725
-----
+ Standard
Airless Flat Tip
No.163 xxx
Tip abbreviation in
accordance with
DIN 24375
+ Cylindrical tips
RAC V
No. 262 xxx
+ Cylindrical tips
XHD RAC
No. XHD xxx
viscous
fluid
Flow rate
l/min.
+ Cylindrical tips
RAC V
No. 262 xxx
0.23 mm
.009″
010023
020023
030023
040023
050023
060023
Spray
* low- patternviscous with/mm at
fluid distance of
300mm from
** highthe object
+ Cylindrical tips
XHD RAC
No. XHD xxx
0.18 mm
.007″
010018
020018
030018
040018
Flow rate
l/min.
+ Standard
Airless Flat Tip
No.163 xxx
Tip abbreviation in
accordance with
DIN 24375
Airless standard, XHD and RAC V Tips (163-xxx odd, XHD-xxx, 262-xxx)
mm
1.741
0.58 mm
.023″
50-100
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
020058
030058
040058
050058
060058
070058
080058
090058
2.082
0.63 mm
.025″
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
mm
0.643
50-100
100-150
150-200
200-250
250-300
300-350
350-400
400-450
0.871
50-100
100-150
150-200
200-250
250-300
300-350
350-400
400-450
mm
163-115
163-215
163-315
163-415
163-515
163-615
163-715
163-815
XHD-115
XHD-215
XHD-315
XHD-415
XHD-515
XHD-615
XHD-715
XHD-815
262-115
262-215
262-315
262-415
262-515
262-615
--262-815
1.136
50-100
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
163-117
163-217
163-317
163-417
163-517
163-617
163-717
163-817
163-917
XHD-117
XHD-217
XHD-317
XHD-417
XHD-517
XHD-617
XHD-717
XHD-817
---
--262-217
262-317
262-417
262-517
262-617
--262-817
262-917
50-100
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
163-119
163-219
163-319
163-419
163-519
163-619
163-719
163-819
163-919
XHD-119
XHD-219
XHD-319
XHD-419
XHD-519
XHD-619
XHD-719
XHD-819
---
262-119
262-219
262-319
262-419
262-519
262-619
--262-819
---
09/09/2008 15:01
2.498
0.68 mm
.027″
mm
1.363
020063
030063
040063
050063
060063
070063
080063
090063
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
020068
030068
040068
050068
060068
070068
080068
090033
0.74 mm
.029″
2.914
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
163-227
163-327
163-427
163-527
163-627
163-727
163-827
163-927
XHD-227
XHD-327
XHD-427
XHD-527
XHD-627
XHD-727
XHD-827
XHD-927
--262-327
262-427
262-527
262-627
--262-827
---
020074
030074
040074
050074
060074
070074
080074
090074
0.79 mm
.031″
3.331
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
163-229
163-329
163-429
163-529
163-629
163-729
163-829
163-929
XHD-229
XHD-329
XHD-429
XHD-529
XHD-629
XHD-729
XHD-829
---
----262-429
262-529
262-629
262-729
-------
3.861
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
163-231
163-331
163-431
163-531
163-631
163-731
163-831
163-931
XHD-231
XHD-331
XHD-431
XHD-531
XHD-631
XHD-731
XHD-831
XHD-931
----262-431
262-531
262-631
--262-831
---
020079
030079
040079
050079
060079
070079
080079
090079
23-3
0.871
1.098
1.04 mm
.041 ″
030104
040104
050105
060104
070104
080104
090104
1.363
4.958
1.703
5.526
2.082
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
--163-433
163-533
163-633
163-733
163-833
163-933
XHD-333
XHD-433
XHD-533
XHD-633
XHD-733
XHD-833
XHD-933
--262-433
262-533
262-633
--262-833
---
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
163-235
163-335
163-435
163-535
163-635
163-735
163-835
163-935
XHD-235
XHD-335
XHD-435
XHD-535
XHD-635
XHD-735
XHD-835
XHD-935
262-235
150-200
200-250
250-300
300-350
350-400
400-450
450-500
---------------
XHD-337
XHD-437
XHD-537
XHD-637
XHD-737
XHD-837
XHD-937
262-435
262-535
262-635
262-735
262-835
262-935
539
2.536
100-150
150-200
200-250
250-300
300-350
350-400
400-450
450-500
163-239
163-339
163-439
163-539
163-639
--163-839
163-939
XHD-139
XHD-239
XHD-339
XHD-439
XHD-539
XHD-639
XHD-739
XHD-839
XHD-939
030119
040119
050119
060119
070119
080119
1.24 mm
.049″
---------------
------262-439
---------
3.028
150-200
200-250
250-300
300-350
350-400
400-450
450-500
8.970
5.11
5.98
XHD-341
XHD-441
XHD-541
XHD-641
XHD-741
XHD-841
---
1.40 mm
.055″
030140
040140
050140
060140
070140
080140
10.674
7.154
12.150
9.273
1.45 mm
.057″
+ Cylindrical tips
No. RAC V
250-300
350-400
163-449
163-749
-----
-----
163-351
163-451
163-551
163-651
-----
XHD-351
XHD-451
XHD-551
XHD-651
XHD-751
XHD-851
--262-451
262-551
262-651
-----
--163-455
163-555
163-655
-----
XKD-355
XHD-455
XHD-555
XHD-655
XHD-755
XHD-855
--262-455
262-555
262-655
-----
200-250
250-300
300-350
163-457
163-557
163-657
-------
-------
350-400
163-757
---
---
163-459
163-659
-----
-----
----163-661
--163-861
XHD-461
XHD-561
XHD-661
XHD-761
XHD-861
-----------
163-463
163-563
163-663
163-863
---------
-262-563
-----
150-200
200-250
250-300
300-350
350-400
400-450
150-200
200-250
250-300
300-350
350-400
400-450
12.772
040145
050145
060145
040150
060150
mm
11.907
200-250
300-350
mm
mm
7.532
3.634
150-200
200-250
250-300
300-350
350-400
400-450
450-500
mm
--163-443
163-543
163-643
----163-943
200-250
250-300
300-350
400-450
163-445
163-545
163-645
163-845
XHD-343
XHD-443
XHD-543
XHD-643
XHD-743
XHD-843
---
262-443
262-543
---------
8.251
040114
050114
060114
080114
-------------
mm
1.55 mm
.061″
1.09 mm
.043″
030109
040109
050109
060109
070109
080109
090109
1.14 mm
.045″
XHD-347
XHD-447
XHD-547
XHD-647
XHD-747
XHD-847
mm
1.50 mm
.059″
---------------
----163-547
163-647
--163-847
mm
10.395
163-341
163-441
163-541
163-641
--163-841
---
150-200
200-250
250-300
300-350
350-400
400-450
mm
mm
1.30 mm
.051″
mm
6.813
** highviscous
fluid
Spray
patternwith/mm at
distance of
300mm
from
the object
9.727
040124
070124
030130
040130
050130
060130
070130
080130
mm
6.170
339
* lowviscous
fluid
1.19 mm
.047″
mm
4.353
Tip abbreviation in
accordance with
DIN 24375
+ Cylindrical tips
No. RAC V
+ Cylindrical tips
No. XHD RAC
** highviscous
fluid
Flow rate
l/min.
+ Cylindrical tips
No. XHD RAC
0.99 mm
.039″
010099
020099
030099
040099
050099
060099
070099
080099
090099
* lowviscous
fluid
Spray
patternwith/mm at
distance of
300mm
from
the object
+ Standard
Airless Flat Tip
No.
0.84 mm
.033″
030084
040084
050084
060084
070084
080084
090084
0.89 mm
.035″
020089
030089
040089
050089
060089
070089
080089
090089
0.94 mm
.037″
030094
040094
050094
060094
070094
080094
090094
Flow rate
l/min.
+ Standard
Airless Flat Tip
No.
Tip abbreviation in
accordance with
DIN 24375
4.353
09/09/2008 15:01
XHD-445
-------
----262-645
---
23-4
040155
050155
060155
070155
080155
1.60 mm
.063″
040160
050160
060160
080160
13.626
200-250
250-300
300-350
350-400
400-450
mm
15.140
200-250
250-300
300-350
400-450
1.65 mm
.065″
050165
060165
080165
mm
250-300
300-350
400-450
17.01
1.70 mm
.067″
040170
050170
060170
070170
080170
*
**
163-665
---
262-665
200-250
250-300
300-350
350-400
400-450
18.9
--163-567
163-667
--163-867
XHD-467
XHD-567
XHD-667
XHD-767
XHD-867
-----------
XHD-471
XHD-571
XHD-671
XHD-771
1.90 mm
.073″
040190
050190
060180
+ Cylindrical tips
No. RAC V
+ Cylindrical tips
No. XHD RAC
+ Standard
Airless Flat Tip
No.
300mm from
the object
** highviscous
fluid
mm
200-250
250-300
300-350
XHD-475
XHD-575
XHD-675
-------
163-477
---
---
163-479
---
---
XHD-481
---
mm
200-250
mm
200-250
2.06 mm
.081″
040206
163-471
--163-671
---
Spray pattern-
* low- with/mm at
viscous
distance of
fluid
2.01 mm
.79″
040201
mm
250-300
300-350
350-400
Flow rate
l/min.
1.95 mm
0.077″
040195
mm
1.80 mm
.071″
040180
050180
060180
070180
•
+
Tip abbreviation in
accordance with
DIN 24375
viscous
fluid
+ Cylindrical tips
No. RAC V
Spray
* low- patternviscous with/mm at
fluid distance of
300mm from
** highthe object
+ Cylindrical tips
No. XHD RAC
Flow rate
l/min.
+ Standard
Airless Flat Tip
No.
Tip abbreviation in
accordance with
DIN 24375
mm
200-250
---------
The DIN abbreviation gives the spraying angle with the first three digits and the equivalent tip hole diameter in 1/100 mm with the last three digits.
the fourth digit gives the approximate spraying angle in ... th of a degree and the last two digits the approximate equivalent tip hole diameter in 1/1000″ ,e.g.,
543 or GHD-543 has an approximate spraying angle of 50° and an approximate tip hole diameter of 0,043″ (1,09 mm).
This value is based on a fluid viscosity of 250 m Pas (57 s DIN-cup 4 or 250 cP) at a pressure of 122 bar.
There are values for thick matter with a viscosity of 56000 (No. 6 Spindel,10 rpm or 56000cP) at a pressure of 105 bar.
The recoil forces for tip hole diameters up to ,076 mm are max. 80 N for a test pressure of 350 bar and for tip hole diameter up to 2 mm max. 190 N for a test pressure of 110 bar.
For all special sizes, round spray tips etc. please contact your Graco dealer.
0.25 mm
.010″
020025
030025
040025
050025
060025
0.30 mm
.012″
020030
030030
040030
050030
060030
070030
50-100
100-150
200-250
163-108
163-208
163-408
0.341
100-150
150-200
200-250
250-300
300-350
163-210
163-310
163-410
163-510
163-610
0.53
100-150
150-200
200-250
250-300
300-350
350-400
163-212
163-312
163-412
163-512
163-612
163-712
09/09/2008 15:01
0.41 mm
.016″
020041
030041
040041
050041
060041
070041
080041
0.46 mm
.018″
020046
030046
040046
050046
0.719
100-150
150-200
200-250
250-300
300-350
350-400
400-450
163-214
163-314
163-416
163-516
163-616
163-714
163-814
0.946
100-150
150-200
200-250
250-300
300-350
350-400
400-450
163-216
163-316
163-416
163-516
163-616
163-716
163-816
050046
060046
070046
080046
163-218
163-318
163-418
163-518
250-300
300-350
350-400
100-450
163-518
163-618
163-718
163-818
0.66 mm
.026″
0.51 mm
.020″
040051
050051
060051
080051
0.56 mm
.022″
050056
060056
080056
060061
080061
23-5
Flow rate
l/min.
Spray
patternwith/mm at
distance of
300mm from
the object
2.687
300-350
400-450
Fine Finish Spray
Tips No.
Spray patternwith/mm at
distance of
300mm from
the object
060066
080066
0.61 mm
.024″
1.249
100-150
150-200
200-250
250-300
Tip abbreviation in
accordance with
DIN 24375
Fine Finish Spray
Tips No.
Tip abbreviation in
accordance with
DIN 24375
0.36 mm
.014″
020038
030038
040038
050038
060038
070038
080038
distance of
300mm from
the object
Flow rate
l/min.
Tip abbreviation in
accordance with
DIN 24375
0.027
Flow rate
l/min.
Fine Finish Spray
Tips No.
0.20 mm
.008 ″
010020
020020
040020
distance of
300mm from
the object
Fine Finish Spray
Tips No.
Tip abbreviation in
accordance with
DIN 24375
Fine Finish Airless Spray Tips (163-xxx, even)
Flow rate
l/min.
6
163-626
163-826
1.552
200-250
250-300
300-350
350-400
163-420
163-520
163-620
163-820
1.893
250-300
300-350
350-400
163-522
163-622
163-822
2.271
300-350
400-450
163-624
163-824
0.76 mm
.030″
040076
050076
0.81 mm
.032″
020081
080081
3.596
200-250
250-300
163-430
163-530
4.164
100-150
400-450
163-232
163-832
CHOOSING THE RIGHT TIP RAC X (1)
Use with RAC X and G40 switch, not RAC IV & RAC V,
RAC X LATEX application (LTX - xxx)
LTX xxx
Orifice mm (In.)
Spray pattern
width
mm
(In.)
102-152 (4 – 6″)
152-203 (6 – 8″)
203-254 (8 – 10″)
254-305 (10 – 12″)
305-356 (12 – 14″)
356-406 (14 – 16″)
Fluid flow l/min
Fluid flow gal./min
0.23
(.009)
209
309
0.28
(.011)
211
311
411
511
0.33
(.013)
213
313
413
513
0.38
(.015)
215
315
415
515
615
0.43
(.017)
217
317
417
517
617
0.48
(.019)
219
319
419
519
619
.91
1.17
1.47
0.53 0.58 0,63 0,68 0,74 0,79 0,89
(.021) (.023) (.025) (.027) (.029) (.031) (.035)
321
421
521
621
721
1.79
423
523
623
525
625
527
627
629
531
631
535
635
2.15
2.54
2.96
3.42
3.90
4.98
.24 .31 .38 .47 .57
Water @ 2000 psi, 138 bar
Example: Order no. Tip with 0.38mm (0.015″) orifice and a spray pattern of 152mm (6″) is LTX 315 .
Spray pattern
width
RAC X WITH RAC application (WR-12xx)
mm
(In.)
610 mm
(24″)
Fluid flow l/min
Fluid flow gal./min
WR12 xx
“blue“
Orifice mm (In.)
0.53 0.58 0.63 0.68 0.74 0.79 0.83 0.89 0.94 0.99
(.021) (.023) (.025) (.027) (.029) (.031) (.033) (.035) (.037) (.039)
1221 1223 1225 1227 1229 1231 1233 1235 1237 1239
1.79
.47
2.15 2.54 2.96 3.42 3.90 4.42 4.98 5.56 6.18
.57
.67
.77
.90 1.03 1.17 1.31 1.47 1.63
Example: Order no. Tip with 0.68mm (0.027″) orifice and a spray pattern of 610mm (24″) is WR1227.
RAC X FINE FINISH application (FFT - xxx),
with solvent resistant gasket 15E557 (acetal „delrin“) orange and seat 15A981 (316SST)
Kit 248 936 included: (5x 15A981 & 5x 15E557)
FFT xxx
Orifice mm (In.)
0.20
0.25
0.30
0.36
(In.)
(.008) (.010) (.012) (.014)
102-152 (4 – 6″)
208
210
212
214
152-203 (6 – 8″)
308
310
312
314
203-254 (8 – 10″)
410
412
414
279 330 (11 - 13″)
510
512
514
330 380 (13 – 15″)
612
614
Fluid flow l/min
.91
1.17
1.47
1.79
Fluid flow gal./min
.24
.31
.38
.47
Example: Order no. Tip with 0.25mm (0.010″) orifice and a spray pattern of 203mm (8″) is FFT410.
width
Spray pattern
mm
09/09/2008 15:01
23-6
“green“
“blue”
CHOOSING THE RIGHT TIP RAC X (2)
FFA - xxx
PAA - xxx
HDA - xxx
FFA-xxx
PAA-xxx
RAC X Fine Finish
RAC X Professional Airless
RAC X Professional Airless
0,008" - 0,014"
0,015" - 0,025"
HDA-xxx 0,027" - 0,071"
orifice
0,008"
0,010"
0,012"
0,014"
5 cm
108
110
112
0,015"
0,017"
0,019"
0,021"
0,023"
0,025"
115
0,027"
0,029"
0,031"
0,033"
0,035"
0,037"
0,039"
0,041"
0,043"
0,045"
0,051"
0,055"
0,061"
0,065"
0,071"
application (FFA- xxx) 0,008” – 0,014”
application (PAA- xxx) 0,015” – 0,025”
application (HDA- xxx) 0,027” – 0,071”
Spray Pattern width
10 cm
15 cm
20 cm
208
308
210
310
410
212
312
412
214
314
414
215
217
219
221
25 cm
30 cm
510
512
514
612
614
315
317
319
321
323
325
415
417
419
421
423
435
515
517
519
521
523
525
615
617
619
621
623
625
231
327
329
331
235
335
427
429
431
433
435
527
529
531
533
535
537
539
541
543
545
551
555
561
627
629
631
633
635
637
639
641
643
645
651
655
661
665
671
225
227
439
441
443
445
451
455
35 cm
721
723
40 cm
817
819
821
827
729
WR-xxx
60 cm
1221
1223
1225
1227
1229
1231
1233
1235
1237
1239
735
831
833
835
35 cm
40 cm
711
713
715
717
719
721
723
725
727
729
731
733
735
737
739
741
743
813
815
817
819
821
823
825
827
829
831
833
835
837
839
841
843
Æ G40-RAC conversion Kit 287 917 for G40 and G40 Automatic-gun
Thread 1 ¼“-18 UNEF 2B
XHD – xxx
RAC X High pressure coating
FlowRate l/min
0,2
0,33
0,49
0,69
0,91
1,17
1,47
1,79
2,15
2,54
2,96
3,42
3,9
4,42
4,98
5,56
6,18
6,83
7,51
8,23
8,98
9,76
10,57
16,13
12,29
13,2
14,14
15,12
16,13
17,17
18,24
19,34
20,48
22,85
26,66
09/09/2008 15:01
orifice
0,007"
0,009"
0,011"
0,013"
0,015"
0,017"
0,019"
0,021"
0,023"
0,025"
0,027"
0,029"
0,031"
0,033"
0,035"
0,037"
0,039"
0,041"
0,043"
0,045"
0,047"
0,049"
0,051"
0,053"
0,055"
0,057"
0,059"
0,061"
0,063"
0,065"
0,067"
0,069"
0,071"
0,075"
0,081"
5 cm
107
111
113
115
117
119
121
10 cm
209
211
213
215
217
219
221
225
227
229
231
235
139
239
15 cm
307
309
311
313
315
317
319
321
323
325
327
329
331
333
335
337
339
341
343
345
347
20 cm
25 cm
30 cm
409
411
413
415
417
419
421
423
435
427
429
431
433
435
437
439
441
443
445
447
449
451
453
455
509
511
513
515
517
519
521
523
525
527
529
531
533
535
537
539
541
543
545
547
549
551
553
555
557
609
611
613
615
617
619
621
623
625
627
629
631
633
635
637
639
641
643
645
647
649
651
351
355
459
461
463
465
467
471
475
481
23-7
561
565
567
571
575
655
657
659
661
663
665
667
669
671
675
747
749
751
753
755
847
851
855
761
861
863
767
867
771
SPECIAL AIRLESS SPRAYING TIPS
Contractor flat tip (269 xxx) housing nickel plated Manual: 306 686
Spray pattern
width*
Contractor flat tip (269 xxx) housing nickel plated
(Contractor and Silver)
Orifice mm (In.)
mm
(In.)
102−152 mm
152−203 mm
203−254 mm
254−305 mm
305−356 mm
356−406 mm
406−457 mm
457−508 mm
Fluid flow l/min
Fluid flow gal./m
(4-6″)
(6-8″)
(8-10″)
(10-12″)
(12-14“)
(14-16″)
(16-18″)
(18-20″)
0.28
(.011)
211
311
411
511
0.12
0.49
0.33
(.013)
213
313
413
513
613
0.38
(.015)
215
315
415
515
615
715
815
0.18
0.69
0.43
(.017)
217
317
417
517
617
717
0.48
(.019)
219
319
419
519
619
0.53
(.021)
819
421
521
621
721
821
0.24
0.31
0.38
0.47
0.91
1.17
1.47
1.79
0.58
(.023)
323
423
523
623
0.63
(.025)
225
325
425
525
0.68
(.027)
227
327
427
527
627
0.74
(.029)
0.79
(.031)
827
829
831
0.74
2.96
0.90
3.42
1.03
3.9
0.89
(0.35
435
531
631
635
725
0.57
2.15
925
0.67
2.54
1.31
4.98
* Spray pattern width by a distance of 300 mm
RAC Line Lazer Airless Spraying Tips(LL5-xxx) Use in RAC V (243-161 or 243-263)
Spray pattern
width
152mm distance
to the object
Tip size
mm (In..)
Fluid Flow l/min.*
Tip -No.
51
0.33 mm
(0.013″)
LL5-213
0.69
51
102
0.38 mm
(0.015″)
51
102
152
51
102
152
102
152
305
102
152
305
102
152
305
0.43 mm
(0.017″)
0.48 mm
(0.019″)
0.53 mm
(0.021″)
0.58 mm
(0.023″)
0.63 mm
(0.025″)
LL5-215
LL5-315
0.91
LL5-217
LL5-317
LL5-417
LL5-219
LL5-319
LL5-419
LL5-321
LL5-421
LL5-621
LL5-323
LL5-423
LL5-623
LL5 325
LL5 425
LL5-625
1.17
1.47
1.79
2.15
2.54
Tip size
mm (In. )
Spray pattern
width
152mm distance
to the object
102
152
305
102
152
305
102
152
305
102
0.68 mm
(0.027″)
0.74 mm
(0.029″)
0.79 mm
(0.031”)
0.84
(0.033”)
yellow
Fluid Flow l/min.*
2.96
3.42
3.9
Tip -No.
LL5-327
LL5 427
LL5-627
LL5 329
LL5 429
LL5 629
LL5 331
LL5 431
LL5 631
LL5 333
4.42
102
152
305
0.89 mm
(0.035”)
0.99 mm
(0.039”)
4.98
LL5 335
LL5 435
LL5 635
6.18
305
102
1.4 mm
(0.055”)
LL5 639
LL5-355
12.29
* = Water @ 140 bar
Adjustable Airless Spray Tips
Spray pattern
width
152mm distance
to the object
Tip size
mm
0.13-0.46 mm
0.18-0.48 mm
0.18-0.66 mm
50-350 mm
100-500 mm
50-350 mm
Tip -No.
material
75304 001003 pickle
75304 001006 pickle
75304 001009 Latex
Tip size
mm
0.88-0.66 mm
0.43-0.90 mm
0.53-1.37 mm
Spray pattern
width
152mm distance to
the object
150-550 mm
150-600 mm
150-400 mm
Tip -No.
material
75304 001012 Latex, enamel
75304 001015 Heavy undercoat
75304 001018 Mastic
Accessories
220 254
210 624
6711 181
098 017
166 969
162 863
6778 610
Edge filter front element with 60 u. 100 Mesh
Edge filter element but without protective cap
Cleaning needle set (12 pieces) size 10
Cleaning needle set (12 pieces) size 12
Tip seal, 1,6 mm thick
Tip seal, 3,3 mm thick
⅞″ (A) x M 18 x 1 (l)
Tip protection cap, aerodynamic design (guard)
220 255
11/16″ For standard-tips
220 251
⅞″
For standard-tips
220 250
¾″
For standard-tips
220 247
⅞″
For FF-fine spray tips
220 249
11/16″ For FF-fine spray tips
Reducing bush for fitting reversing switches on pole guns and competition
181 085
⅞″ (A) x 11/16″ (l), Wagner, Aro, Rexson, Binks 43
09/09/2008 15:01
23-8
Airless Automatic Tips GG0-xxx (similar 163 xxx but with higher precision)
Fluid flow
l/min.
Tip
size
in mm
(In.)
Fluid flow
l/min.
Spray pattern
tip
width
part-No.
300mm
distance to the
object
0.18 mm
(0.007″)
0.20
50-63
150-163
GG0107
GG0307
0.23 mm
(0.009″)
0.33
50-63
100-113
150-163
GG0109
GG0209
GG0309
0.28 mm
(0.011″)
0.49
50-63
100-113
150-163
196-213
250-263
300-325
0.33 mm
(0.013″)
0.38 mm
(0.015″)
0.69
100-113
150-163
196-213
250-263
300-325
350-375
0.91
50-63
100-113
150-163
196-213
250-263
300-325
350-375
400-425
GG0111
GG0211
GG0311
GG0411
GG0511
GG0611
GG0213
GG0313
GG0413
GG0513
GG0613
GG0713
GG0115
GG0215
GG0315
GG0415
GG0515
GG0615
GG0715
GG0815
09/09/2008 15:01
Tip
size
in mm
(In. )
0.43 mm
(0.017″)
0.48 mm
(0.019″)
0.53 mm
(0.021″)
0.58 mm
(0.023″)
Spray pattern
width
300mm
distance to the
object
1.17
50-63
100-113
150-163
196-213
250-263
300-325
400-425
450-475
1.47
100-113
150-163
196-213
250-263
300-325
350-375
400-425
Fluid flow
l/min.
Tip
size
in mm
(In. )
tip
part-No.
GG0117
GG0217
GG0317
GG0417
GG0517
GG0617
GG0817
GG0917
2.54
150-163
196-213
250-263
300-325
350-375
400-425
450-475
0.68 mm
(0.027″)
2.96
150-163
196-213
250-263
300-325
350-375
400-425
450-475
GG0327
GG0427
GG0527
GG0627
GG0727
GG0827
GG0927
3.42
196-213
250-263
300-325
350-375
GG0429
GG0529
GG0629
GG0729
0.74 mm
(0.029″)
GG0221
GG0321
GG0421
GG0521
GG0621
GG0721
GG0821
GG0921
2.15
100-113
150-163
196-213
250-263
300-325
350-375
400-425
450-475
GG0223
GG0323
GG0423
GG0523
GG0623
GG0723
GG0823
GG0923
tip
part-No.
0.63 mm
(0.025″)
GG0219
GG0319
GG0419
GG0519
GG0619
GG0719
GG0819
1.79
100-113
150-163
196-213
250-263
300-325
350-375
400-425
450-475
Spray pattern
width
300mm
distance to the
object
Fluid flow
l/min.
0.79 mm
(0.031″)
0.84 mm
(0.033″)
23-9
GG0325
GG0425
GG0525
GG0625
GG0725
GG0825
GG0925
3.90
150-163
196-213
250-263
300-325
350-375
450-475
GG0331
GG0431
GG0531
GG0631
GG0731
GG0931
4.42
200-213
250-263
300-325
350-375
450-475
GG0433
GG0533
GG0633
GG0733
GG0933
Tip
size
in mm
(In. )
Spray
pattern width
300mm
distance to
the object
tip
part-No.
0.89 mm
(0.035″)
4.98
110-113
150-163
196-213
250-263
300-325
350-375
GG0235
GG0335
GG0435
GG0535
GG0635
GG0735
0.94 mm
(0.037″)
5.56
300-325
GG0637
0.99 mm
(0.039″)
6.18
250-263
400-425
GG0539
GG0639
1.041 mm
(0.041″)
6.83
250-263
400-425
GG0541
GG0841
1.09
(0.043“)
7.51
250-263
300-325
GG0543
GG0643
1.14
(0.045“)
8.23
250-263
GG0545
1.19 mm
(0.047″)
8.98
250-263
GG0547
1.24 mm
(0.049″)
9.76
350-375
GG0749
1.35 mm
(0.053″)
11.40
250-263
GG0553
1.40 mm
(0.055″)
12.30
300-325
GG0655
Fine Finish Alpha air-assisted high pressure Tips (AAM-xxx) G15 & G40 Guns
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
0.18 mm
(.007″)
0.10
100-150
150-200
0.23 mm
(.009″)
0.20
50-100
100-150
150-200
200-250
250-300
0.28 mm
(.011″)
0.33 mm
(.013″)
0.30
50-100
100-150
150-200
200-250
250-300
300-350
350-400
0.40
100-150
150-200
200-250
250-300
300-350
350-400
Flow rate
l/min.
(light - to
tip
part-No.
AAM-207
AAM-307
AAM-109
AAM-209
AAM-309
AAM-409
AAM-509
Tip
size
in mm
(In.)
0.38 mm
(.015″)
0.43 mm
(.017″)
AAM-111
AAM-211
AAM-311
AAM-411
AAM-511
AAM-611
AAM-711
0.48 mm
(.019″)
AAM-213
AAM-313
AAM-413
AAM-513
AAM-613
AAM-713
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
tip
part-No.
0.50
100-150
150-200
200-250
250-300
300-350
350-400
400-460
AAM-215
AAM-315
AAM-415
AAM-515
AAM-615
AAM-715
AAM-815
0.70 / 0.50
100-150
150-200
200-250
250-300
300-350
350-400
400-450
457-508
AAM-217
AAM-317
AAM-417
AAM-517
AAM-617
AAM-717
AAM-817
AAM-917
0.80 / 0.60
100-150
150-200
200-250
250-300
300-350
350-400
400-450
457-508
AAM-219
AAM-319
AAM-419
AAM-519
AAM-619
AAM-719
AAM-819
AAM-919
0.53 mm
(.021″)
0.58 mm
(.023″)
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.10 / 0.80
150-200
200-250
250-300
300-350
350-400
400-450
457-508
AAM-321
AAM-421
AAM-521
AAM-621
AAM-721
AAM-821
AAM-921
1.40 / 1.00
200-250
250-300
300-350
350-400
457-508
AAM-423
AAM-523
AAM-623
AAM-723
AAM-923
0.63 mm
(.025″)
1.50 / 1.20
200-250
300-350
350-400
400-450
AAM-425
AAM-625
AAM-725
AAM-825
0.68 mm
(.027″)
1.70 / 1.20
250-300
300-350
400-460
AAM-527
AAM-627
AAM-827
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray
pattern width
300mm
distance to
the object
tip
part-No.
0.74 mm
(.029″)
1.90 / 1.70
300-350
0.79 mm
(.031″)
0.84 mm
(.033″)
2.20 / 2.00
200-250
300-350
2.40 / 2.20
300-350
0.89 mm
(.035″)
2.80 / 2.50
200-250
AAM-435
0.94 mm
(.037″)
3.10 / 2.80
350-400
AAM-737
0.99 mm
(.039″)
3.40 / 3.10
250-300
300-350
400-450
AAM-539
AAM-639
AAM-839
AAM-629
AAM-431
AAM-631
AAM-633
Alpha air-assisted medium pressure tips (GGW-xxx) Alpha AA Gun
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.18 mm *
(.007″)
0.10
50-100
100-150
150-200
GGW-107
GGW-207
GGW-307
0.23 mm *
(.009″)
0.20
50-100
100-150
150-200
200-250
250-300
GGW-109
GGW-209
GGW-309
GGW-409
GGW-509
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
tip
part-No.
0.28 mm *
(.011″)
0.30
50-100
100-150
150-200
200-250
250-300
300-350
GGW-111
GGW-211
GGW-311
GGW-411
GGW-511
GGW-611
0.33 mm
(.013″)
0.40
100-150
150-200
200-250
250-300
300-350
350-400
GGW-213
GGW-313
GGW-413
GGW-513
GGW-613
GGW-713
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.38 mm
(.015″)
0.50
100-150
150-200
200-250
250-300
300-350
350-400
400-460
GGW-215
GGW-315
GGW-415
GGW-515
GGW-615
GGW-715
GGW-815
0.43 mm
(.017″)
0.70 / 0.50
100-150
150-200
200-250
250-300
300-350
350-400
400-450
457-508
GGW-217
GGW-317
GGW-417
GGW-517
GGW-617
GGW-717
GGW-817
GGW-917
Tip
size
in mm
(In. )
0.48 mm
(.019″)
0.53 mm
(.021″)
* These tips contain a tip filter in the housing. A tip filter set (10 items) 150 mesh can be ordered with following P/N: 241 804
*² Fluid output (Q) at other pressure (P) can be calculated by this formula:
Q = (0.041) * (QT) * /_P).Where QT = Fluid output(fl oz/min) from the above table for the selected orifice size.
09/09/2008 15:01
23-10
medium
fluids / highly
viscous fluids)
tip
part-No.
Spray
pattern
width
300mm
distance to
the object
0.80 / 0.60
100-150
150-200
200-250
250-300
300-350
350-400
400-450
457-508
GGW-219
GGW-319
GGW-419
GGW-519
GGW-619
GGW-719
GGW-819
GGW-919
0.10 / 0.80
200-250
250-300
300-350
350-400
400-450
457-508
GGW-421
GGW-521
GGW-621
GGW-721
GGW-821
GGW-921
Alpha air-assisted high pressure Tips (GG4-xxx) AA-Pus Gun
Flow rate
l/min.
(light - to
medium
fluids / highly
viscous fluids)
Tip
size
in mm
(In. )
Spray pattern
width
300mm
distance to the
object
0.18 mm
(.007″)
0.23 mm
(.009″)
0.28 mm
(.011″)
0.33 mm
(.013″)
Flow rate
l/min.
(light - to
tip
part-No.
0.10
50-100
GG4-107
100-150
150-200
GG4-207
GG4-307
0.20
50-100
100-150
150-200
200-250
250-300
0.30
50-100
100-150
150-200
200-250
250-300
300-350
0.40
100-150
150-200
200-250
250-300
300-350
350-400
GG4-109
GG4-209
GG4-309
GG4-409
GG4-509
medium
fluids / highly
viscous fluids)
Tip
size
in mm
(In. )
Spray pattern
width
300mm
distance to the
object
0.38 mm
(.015″)
0.43 mm
(.017″)
GG4-111
GG4-211
GG4-311
GG4-411
GG4-511
GG4-611
0.48 mm
(.019″)
GG4-213
GG4-313
GG4-413
GG4-513
GG4-613
GG4-713
Tip
size
in mm
(In. )
tip
part-No.
0.50
100-150
GG4-215
150-200
200-250
250-300
300-350
350-400
400-460
GG4-315
GG4-415
GG4-515
GG4-615
GG4-715
GG4-815
0.53 mm
(.021″)
0.58 mm
(.023″)
0.70 / 0.50
100-150
150-200
200-250
250-300
300-350
350-400
400-450
457-508
GG4-217
GG4-317
GG4-417
GG4-517
GG4-617
GG4-717
GG4-817
GG4-917
0.80 / 0.60
100-150
150-200
200-250
250-300
300-350
350-400
400-450
457-508
GG4-219
GG4-319
GG4-419
GG4-519
GG4-619
GG4-719
GG4-819
GG4-919
0.63 mm
(.025″)
0.68 mm
(.027″)
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.10 / 0.80
200-250
GG4-421
250-300
300-350
350-400
400-450
457-508
GG4-521
GG4-621
GG4-721
GG4-821
GG4-921
1.40 / 1.00
200-250
250-300
300-350
350-400
400-450
457-508
GG4-423
GG4-523
GG4-623
GG4-723
GG4-823
GG4-923
1.50 / 1.20
200-250
250-300
300-350
350-400
400-450
GG4-425
GG4-525
GG4-625
GG4-725
GG4-825
1.70 / 1.20
250-300
300-350
400-460
GG4-527
GG4-627
GG4-827
* Fluid output at 41 bar.
Fluid output (Q) at other pressure (P) can be calculated by this formula:
Note: With Hi-Flo AA guns, no tips with a size less than 0.64mm should be used.
Automatic G40 Tips (AAP xxx)
Sray pattern width
Orifice mm (In.)
mm
(In.)
102−152 mm
(4-6″)
152−203 mm
(6-8″)
203−254 mm (8-10″)
254−305 mm (10-12″)
305−356 mm (12-14“)
356−406 mm (14-16″)
406−457 mm (16-18″)
Fluid-Flow l/min @ 41 bar
Fluid-Flow l/min @i 70 bar
0.23 #
(.009)
209
309
409
509
0.28 #
(.011)
211
311
411
511
611
0.33
(.013)
213
313
413
513
613
713
0.2
0.27
0.3
0.4
0.4
0.5
0.38
(.015)
215
315
415
515
615
715
815
0.5
0.7
0.43
(.017)
* = 300mm distance to the object
# = with sieve gasket
09/09/2008 15:01
fit in G15 / G40
Flow rate
l/min.
(light - to
23-11
317
417
517
617
717
817
0.7
0.85
0.48
(.019)
219
319
419
519
619
719
0.53
(.021)
0.8
1.09
1.0
1.36
421
521
621
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray
pattern width
300mm
distance to
the object
tip
part-No.
0.74 mm
(.029″)
1.90 / 1.70
300-350
GG4-629
0.79 mm
(.031″)
2.20 / 2.00
200-250
300-350
GG4-431
GG4-631
0.84 mm
(.033″)
2.40 / 2.20
300-350
400-450
GG4-633
GG4-833
0.89 mm
(.035″)
2.80 / 2.50
200-250
300-350
GG4-435
GG4-635
0.94 mm
(.037″)
3.10 / 2.80
350-400
GG4-737
0.99 mm
(.039″)
3.40 / 3.10
250-300
300-350
400-450
GG4-539
GG4-639
GG4-839
AA RAC Spray Tips (242-xxx)
Flow rate
l/min.
(light - to
medium
fluids / highly
viscous fluids)
Tip
size
in mm
(In.)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.28 mm
(.011″)
0.30
100-200
200-250
250-300
242-311
242-411
242-511
0.33 mm
(.013″)
0.40
100-150
150-200
200-250
250-300
300-350
242-213
242-313
242-413
242-513
242-613
0.38 mm
(.015″)
0.50
100-150
150-200
200-250
250-300
300-350
242-215
242-315
242-415
242-515
242-615
Tip
size
in mm
(In. )
0.43 mm
(.017″)
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
0.70 / 0.50
100-150
150-200
200-250
250-300
300-350
Alpha Plus AA
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
tip
part-No.
242-217
242-317
242-417
242-517
242-617
0.48 mm
(.019″)
0.80 / 0.60
100-150
150-200
200-250
250-300
300-350
242-219
242-319
242-419
242-519
242-619
0.53 mm
(.021″)
0.10 / 0.80
100-150
150-200
200-250
250-300
300-350
242-221
242-321
242-421
242-521
242-621
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.58 mm
(.023″)
1.20 / 0.97
200-250
300-350
242-423
242-623
0.63 mm
(.025″)
1.50 / 1.20
250-300
300-350
242-525
242-625
0.68 mm
(.027″)
1.70 / 1.40
200-250
242-427
Tip
size
in mm
(In.)
medium
fluids / highly
viscous fluids)
Spray
pattern width
300mm
distance to
the object
tip
part-No.
0.74 mm
(.029″)
1.90 / 1.70
300-350
242-529
0.79 mm
(.031″)
250-300
242-531
* Fluid Output at 41 bar.
Note: for Alpha Plus manual guns (use reversing switch: 243 570)
- A plastic seat (193-000) is included with the delivery of the tip.
- The air guide ring is not used when using a RAC reserving switch. The air separator must be removed.
- AA RAC conversion kit is available (243-790).
- With Hi-Flo AA guns, no tips with a size smaller than 0.64mm should be used.
Note: for AA Plus Automatic guns (use reversing switch: 238 701)
- A plastic seat (193-000) is included with the delivery of the tip.
- When using AA-RAC the reversing switch, order RAC-housing 192-096 and air cap assembly, 238 701
- The corresponding diffuser need also to be changed 239 173
- The air guide ring is not used when using a RAC reserving switch. the air separator must be removed.
Standard AA Automatic Tips (GG5-xxx) Alpha & G40 AA
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.23 mm
(.008″)
0.20
100-125
150-175
200-225
250-275
GG5-209
GG5-309
GG5-409
GG5-509
0.28 mm
(.011″)
0.30
100-125
150-175
200-225
250-275
GG5-211
GG5-311
GG5-411
GG5-511
09/09/2008 15:01
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
tip
part-No.
0.33 mm
(.013″)
0.40
100-125
150-175
200-225
250-275
300-325
350-375
GG5-213
GG5-313
GG5-413
GG5-513
GG5-613
GG5-713
0.38 mm
(.015″)
0.50
100-125
150-175
200-225
250-275
300-325
350-375
400-425
GG5-215
GG5-315
GG5-415
GG5-515
GG5-615
GG5-715
GG5-815
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.43 mm
(.017″)
0.70 / 0.50
150-175
200-225
250-275
300-325
350-375
400-425
GG5-317
GG5-417
GG5-517
GG5-617
GG5-717
GG5-817
0.48 mm
(.019″)
0.80 / 0.60
200-225
250-275
300-325
350-375
GG5-419
GG5-519
GG5-619
GG5-719
23-12
Tip
size
in mm
(In. )
0.53 mm
(.021″)
medium
fluids / highly
viscous fluids)
Spray
pattern width
300mm
distance to
the object
0.10 / 0.80
200-250
250-300
300-350
400-435
tip
part-No.
GG5-421
GG5-521
GG5-621
GG5-821
Electrostatic air-assisted airless spray Tips (GG3-xxx)
für Pro XS 4 AA, Pro Auto Xs AA
Flow rate
l/min.
(light - to
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.18 mm
(.007″)
0.10
50-100
100-150
150-200
GG3-107
GG3-207
GG3-307
0.23 mm
(.009″)
0.20
50-100
100-150
150-200
200-250
GG3-109
GG3-209
GG3-309
GG3-409
0.28 mm
(.011″)
0.30
50-100
100-150
150-200
200-250
250-300
300-350
GG3-111
GG3-211
GG3-311
GG3-411
GG3-511
GG3-611
Düsengröße
in mm
(In.)
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.33 mm
(.013″)
0.40
50-100
100-150
150-200
200-250
250-300
300-350
350-400
GG3-113
GG3-213
GG3-313
GG3-413
GG3-513
GG3-613
GG3-713
0.38 mm
(.015″)
0.50
50-100
100-150
150-200
200-250
250-300
300-350
350-400
400-460
GG3-115
GG3-215
GG3-315
GG3-415
GG3-515
GG3-615
GG3-715
GG3-815
0.43 mm
(.017″)
0.70 / 0.60
100-150
150-200
200-250
250-300
300-350
400-460
GG3-217
GG3-317
GG3-417
GG3-517
GG3-617
GG3-817
Tip
size
in mm
(In. )
medium
fluids / highly
viscous fluids)
Spray pattern
width
300mm
distance to the
object
Flow rate
l/min.
(light - to
tip
part-No.
0.48 mm
(.019″)
0.80 / 0.60
150-200
200-250
250-300
300-350
350-400
GG3-319
GG3-419
GG3-519
GG3-619
GG3-719
0.53 mm
(.021″)
1.00 / 0.80
200-250
250-300
300-350
350-400
GG3-421
GG3-521
GG3-621
GG3-721
0.58 mm
(.023″)
1.40 / 1.00
200-250
250-300
300-350
GG3-423
GG3-523
GG3-623
* Fluid Output at 41 bar.
Round Spray Pattern Kit 245 282
For Pro Xs 4 AA, manual guns
Select the required tip from the following table (operation instructions 309448)
Round Spray Pattern Kit 245 298
For Pro automatic guns
Select the required tip from the following table (operation instructions 309448)
Spray Tip Selection Chart
for 236 902 and 237 159
Part-No.
Designation / B. width
Thoughput
at 40 bar
Thoughput
at 80 bar
236-836
236-837
236-838
236-839
236-840
236-841
236-842
4A
6A
7A
5B
7B
9B
11B
120 cm³/min
150 cm³/min
160 cm³/min
230 cm³/min
270 cm³/min
350 cm³/min
480 cm³/min
170 cm³/min
220 cm³/min
230 cm³/min
330 cm³/min
420 cm³/min
530 cm³/min
700 cm³/min
229 mm
254 mm
254 mm
356 mm
330 mm
305 mm
279 mm
09/09/2008 15:01
23-13
Tip
size
in mm
(In. )
0.63 mm
(.025″)
medium
fluids / highly
viscous fluids)
Spray
pattern width
300mm
distance to
the object
1.50 / 1.20
200-250
300-350
tip
part-No.
GG3-425
GG3-625
SEALER APPLICATION TIPS AND AIR CAP SELECTION
Gasket
No. 183-616
Fan Jet Tips with Single Orifice
Use with 217-303 or 218-336 air cap
Tip
size
in mm
(In.)
Spray pattern
width
300mm distance to
the object
0.53 mm
(0.021″)
0.58 mm
(0.023″)
0.63 mm
(0.025″)
0.68 mm
(0.027″)
0.74 mm
(0.029″)
Tip
size
in mm
(In.)
tip
part-No.
Recomended
Air cap
200-250
250-300
300-350
350-400
400-460
182-421
182-521
182-621
182-721
182-821
217-303
0.79 mm
(0.031″)
200-250
250-300
300-350
350-400
400-460
182-423
182-523
182-623
182-723
182-823
217-303
0.89 mm
(0.035″)
200-250
250-300
300-350
350-400
400-450
182-425
182-525
182-625
182-725
182-825
217-303
0.99 mm
(0.039″)
200-250
300-350
182-427
182-627
218-336
1.04 mm
(0.041″)
200-250
300-350
350-400
182-429
182-629
218-336
1.09 mm
(0.043″)
Air Cap
Application
Tips
Air cap No.
Streamer
Fan jet
Fan jet
C08187, C08224, 270 series
182X21 – 182X25
182X27 – 182X77
220960
217303
218336
Spray pattern
width
300mm distance to
the object
tip
part-No.
Recomended
Air cap
200-250
300-350
182-431
182-631
218-336
200-250
300-350
182-435
182-535
218-336
200-250
250-300
300-350
182-439
182-539
182-639
218-336
200-250
218-336
200-250
250-300
300-350
182-443
182-543
182-643
218-336
Stream tips with multiple-orifices
Use with air cap 220-960
No. of orifices
6
Tip size mm (In.)
0.53 (.021″)
Order-No.
C08224
Stream tips, Single Orifice Round Section Jet
Use with circular air cap 220 960
Part-No.
270 025
270 027
270 029
270 031
270 035
Tip size mm (In.)
0.63 (.025″)
0.68 (.027″)
0.74 (.029″)
0.79 (.031″)
0.89 (.035″)
Part-No.
270 037
270 039
270 041
270 043
Round Jet
09/09/2008 15:01
Tip size mm (In.)
0.94 (.037″)
0.99 (.039″)
1.04 (.041″)
1.09 (.043″)
Fan Jet
23-14
®
PUMP PERFORMANCE CHARTS
THEORETICAL PUMP LIFTING VOLUME (2 BALL TYPE)
FAST-FLO STANDARD PUMP
Calculator Flow rate l/min.
Viscosity DIN Becher 4, 10“
Divorced 1,3:1
Liter
Inline 1:1
Liter
2:1
Liter
AIR CONSUMPTION IN LITRES FOR
Vol.
1
2
3
bar
bar
bar
bar
4
bar
5
bar
Flow rate for 1 DS
0,15
0,20
0,10
0,22
0,44
0,66
0,88
1,10
1,32
Flow rate for 10 DS
1,50
2,00
1,00
2,20
4,40
6,60
8,8
11,00
13,20
Flow rate for 20 DS
3,00
4,00
2,00
4,40
8,80
13,20
17,6
22,00
26,40
Flow rate for 30 DS
4,50
6,00
3,00
6,60
13,20
19,80
26,40
33,00
39,60
Flow rate for 40 DS
6,00
8,00
4,00
8,80
17,60
26,40
35,20
44,00
52,80
Flow rate for 50 DS
7,50
10,00
5,00
11,00
22,00
33,00
44,00
55,00
66,00
Flow rate for 100 DS
15,00
20,00
10,00
12,00
44,00
66,00
88,00
110,00
122,00
4
bar
5
bar
STANDARD –PUMP (76 mm Hub)
Vol.
1
2
3
bar
bar
bar
bar
Calculator Flow rate for l/min.
1.5:1
Liter
Flow rate for 1 DS
0,071
0,16
0,32
0,48
0,64
0,80
0,96
Flow rate for 50 DS
3,55
8,00
16,00
24,00
32,00
40,00
48,00
Flow rate for 130 DS
9,23
20,80
41,60
62,40
83,20
104,00
125,00
4
bar
5
bar
FIREBALL- AND MONARK-PUMP
Vol.
1
2
3
bar
bar
bar
bar
1,5:1
Liter
5:1
Liter
10:1
Liter
15:1
Liter
23:1
Liter
Flow rate for 1 DS
0,465
0,15
0,063
0,038
0,027
0,7
1,4
2,1
2,8
3,5
4,2
Flow rate for 10 DS
4,65
1,50
0,63
0,38
0,27
7,0
14,0
21,0
28,0
35,0
42,0
Flow rate for 20 DS
9,30
3,00
1,26
0,78
0,54
14,0
28,0
42,0
56,0
70,0
84,0
Flow rate for 30 DS
13,95
4,50
1,89
1,14
0,81
21,0
42,0
63,0
84,0
105,0
126,0
Flow rate for 40 DS
18,00
6,00
2,52
1,52
1,08
18,0
56,0
84,0
112,0
140,0
168,0
Flow rate for 50 DS
23,25
7,50
3,15
1,90
1,35
35,0
70,0
105,0
140,0
175,0
210,0
Flow rate for 60 DS
27,90
9,00
3,78
2,28
1,62
42,0
84,0
126,0
168,0
210,0
252,0
Flow rate for 70 DS
32,55
10,50
4,41
2,66
1,89
49,0
98,0
147,0
196,
245,0
294,0
Free flow/min DIN 24374
67,00
40,00
13,00
11,00
8,50
4
bar
5
bar
Air inlet pressure max.:
12,50
12,50
6,30
12,50
8,40
Maximum working pressure:
18,75
62,00
63,00
190,00
190,00
3:1
Liter
10:1
Liter
15:1
Liter
30:1
Liter
46:1
Liter
RESIDENT-PUMP
Vol.
1
2
3
bar
bar
bar
bar
Flow rate for 1 DS
0,62
0,20
0,108
0,061
0,035
1,9
3,8
5,7
7,6
9,5
11,4
Flow rate for 10 DS
6,20
2,00
1,08
0,61
0,35
19,0
38,0
47,0
76,0
95,0
114,0
Flow rate for 20 DS
12,40
4,00
2,16
1,22
0,70
38,0
76,0
114,0
152,0
190,0
228,0
Flow rate for 30 DS
18,60
6,00
3,24
1,83
1,05
57,0
114,0
171,0
228,0
285,0
342,0
Flow rate for 40 DS
24,80
8,00
4,32
2,44
1,40
76,0
152,0
228,0
304,0
380,0
456,0
Flow rate for 50 DS
31,00
10,00
5,40
3,05
1,75
95,0
190,0
285,0
380,0
475,0
570,0
Flow rate for 60 DS
37,20
12,00
6,48
3,66
2,10
114,0
228,0
342,0
458,0
570,0
684,0
73,00
35,00
24,00
13,50
8,00
133,0
266,0
399,0
532,0
665,0
798,0
12,40
12,40
8,40
8,40
7,50
37,00
124,00
126,00
250,00
350,00
Bulldog-PUMP
Vol.
1
2
3
bar
bar
bar
bar
Calculator Flow rate
l/min. Viscosity DIN4.10"
5:1
Liter
10:1
Liter
14:1
Liter
21:1
Liter
28:1
Liter
33:1
Liter
41:1
Liter
60:1
Liter
Flow rate for 1 DS
1,108
0,57
0,434
0,289
0,217
0,181
0,145
0,095
6
12
18
24
30
36
Flow rate for 10 DS
11,08
5,79
4,34
2,89
2,17
1,81
1,45
0,95
60
120
180
240
300
360
Flow rate for 20 DS
22,16
11,5
8,68
5,78
4,34
3,62
2,;90
1,90
120
240
360
480
600
720
Flow rate for 30 DS
32,24
17,3
13,02
8,67
6,51
5,43
4,35
2,85
180
360
540
720
900
1080
Flow rate for 40 DS
44,32
23,1
17,36
11,56
8,68
7,24
5,80
3,30
240
480
720
960
1200
1440
Flow rate for 50 DS
55,40
28,9
21,70
14,45
10,85
9,05
7,25
4,75
300
600
900
1200
1500
1800
Free flow DIN24374
120,00
104,0
78,50
52,00
39,50
33,00
26,50
18,50
7,00
7,00
7,00
7,00
7,00
7,00
7,00
bar ?
35,00
70,0
98,00
147,00
196,00
231,0
287,00
bar ?
10:1
Liter
20:1
Liter
28:1
Liter
56:1
Liter
68:1
Liter
4
bar
5
bar
Max. work pressure:
KING-PUMP
Viscosity DIN Becher 4.10"
3:1
Liter
Vol.
1
2
3
bar
bar
bar
bar
4
bar
5
bar
Flow rate for 1 DS
3,953
1,108
0,579
0,434
0,217
0,181
12
24
36
48
60
73
Flow rate for 10 DS
39,53
11,08
5,79
4,34
2,17
1,81
121
243
364
486
607
729
Flow rate for 20 DS
79,06
22,06
11,58
8,68
4,34
3,62
243
486
729
972
1215
1458
Flow rate for 30 DS
118,59
33,24
17,37
13,02
6,51
5,43
364
729
1093
1458
1822
2187
Flow rate for 40 DS
158,12
44,32
23,16
17,36
8,68
7,24
486
972
1458
1944
2430
2916
Flow rate for 50 DS
197,65
55,40
28,95
21,70
10,85
9,05
607
1215
1822
2430
3037
3645
395,00
150,00
74,00
69,00
41,00
36,00
6,30
6,30
6,30
6,30
6,30
6,30
18,00
63,00
128,00
176,0
350,00
428,00
Note: All numbers refer to the sucked in compressed air. he pressure numbers state the overpressure in bar. DS = Double stroke
03/02/09
24 - 1
PUMP PERFORMANCE CHARTS
FLOW RATE FOR FIREBALL and
10:1
Liter
MONARK PUMPS
23:1
Liter
50:1
Liter
80:1
Liter
THEORETICAL PUMP LIFTING VOLUME (Check-Mate)
Vol.
1
2
3
bar
bar
bar
bar
4
bar
5
bar
Flow rate for 1 DS
0.068
0.030
0.012
0.0047
0.7
1.4
2.1
2.8
4.5
4.2
Flow rate for 10 DS
0.68
0.30
0.125
0.047
7.0
14.0
21.0
28.0
35.0
42.0
Flow rate for 20 DS
1.36
0.60
0.25
0.096
14.0
28.0
42.0
56.0
70.0
34.0
Flow rate for 30 DS
2.04
0.90
0.37
0.141
21.0
42.0
63.0
84.0
105.0
126.0
Flow rate for 40 DS
2.72
1.20
0.50
0.188
28.0
56.0
84.0
112.0
140.0
168.0
Flow rate for 50 DS
3.40
1.50
0.62
0.235
35.0
70.0
105.0
140.0
175.0
210.0
Flow rate for 60 DS
4.08
1.80
0.75
0.282
42.0
84.0
126.0
168.0
210.0
252.0
Flow rate for 70 DS
4.76
2.10
0.88
0.329
49.0
98.0
147.0
196.0
245.0
294.0
14.00
9.30
4.20
4
bar
5
bar
12.50
12.50
11.00
125.00
285.00
550.00
FLOW RATE FOR “PRESIDENT” PUMPS
Calculated flow rate in lpm.
20:1
46:1
Viscosity DIN cup 4.10”
Litres
Litres
1
2
3
bar
bar
bar
Vol.
bar
Flow rate for
1
DS
0.091
0.040
1.9
3.8
5.7
7.6
9.5
11.4
Flow rate for
10
DS
0.91
0.40
19.0
38.0
57.0
76.0
95.0
114.0
Flow rate for
20
DS
1.82
0.80
38.0
76.0
114.0
152.0
190.0
228.0
Flow rate for
30
DS
2.73
1.20
57.0
114.0
171.0
228.0
285.0
342.0
Flow rate for
40
DS
3.64
1.60
76.0
152.0
228.0
304.0
380.0
456.0
Flow rate for
50
DS
4.55
2.00
95.0
190.0
285.0
380.0
475.0
570.0
Flow rate for
60
DS
5.46
2.40
114.0
228.0
342.0
456.0
570.0
684.0
Flow rate for
70
DS
6.37
2.80
133.0
266.0
399.0
532.0
665.0
798.0
20.00
6.40
4
bar
5
bar
12.50
7.00
250.00
320.00
FLOW RATE FOR “BULLDOG” PUMPS
3:1
12:1
31:1
Litres
Litres
Litres
Vol. bar
1
2
3
bar
bar
bar
Flow rate for
1
DS
0.985
0.504
0.193
6
12
18
24
30
36
Flow rate for
10
DS
9.85
5.04
1.93
60
120
180
240
300
360
Flow rate for
20
DS
19.70
10.08
3.86
120
240
360
480
600
720
Flow rate for
30
DS
29.55
15.12
5.79
180
360
540
720
900
1080
Flow rate for
40
DS
39.40
20.16
7.72
240
480
720
900
1200
1440
Flow rate for
50
DS
49.25
25.20
9.65
300
600
900
1200
1500
1800
Flow rate for
60
DS
59.10
30.24
11.58
360
720
1080
1440
1800
2160
Flow rate for
70
DS
68.95
35.28
13.51
420
840
1260
1680
2100
2520
159.00
92.00
36.0
4
bar
5
bar
8.40
7.00
7.0
25.00
84.00
215
FLOW RATE FOR “KING”
24:1
Litres
50:1
Litres
Vol.
bar
PUMPS AIR CONSUMPTION IN LITRES FOR
1
2
3
bar
bar
bar
Flow rate for
1
DS
0.504
0.241
12
24
36
48
60
72
Flow rate for
10
DS
5.04
2.41
121
243
364
486
607
729
Flow rate for
20
DS
10.08
4.82
243
486
729
972
1215
1458
Flow rate for
30
DS
15.12
7.24
364
729
1093
1458
1822
2187
Flow rate for
40
DS
20.16
9.65
486
972
1458
1944
2430
2916
Flow rate for
50
DS
25.20
12.05
607
1215
1822
2430
3037
3645
64.00
31.50
6.30
6.3
151.0
151.00
Note:
All numbers refer to the sucked in compressed air.
Recommended DS/min.: The pressure numbers state the overpressure in bar.
For ink pastes
40
For oils and greases
70
For other liquids, such as highly viscose adhesives, bonding and thick pastes
DS = Double stroke
24 - -2
20-40
®
PUMP PERFORMANCE CHARTS ”NXT Series”
2 ball pump volume
Ratio
6:1
10:1
12:1
15:1
16:1
21:1
23:1
24:1
25:1
30:1
31:1
32:1
35:1
40:1
45:1
46:1
50:1
55:1
60:1
70:1
90:1
Lower
(cm³)
1000
1000
580
430
290
220
580
180
290
220
145
430
115
180
290
145
250
115
220
180
145
Air Motor
(cm³)
3400
6500
3400
3400
2200
2200
6500
2200
3400
3400
2200
6500
2200
3400
6500
3400
6500
3400
6500
6500
6500
1/DS
(litre)
1
1
0.58
0.43
0.29
0.22
0.58
0.18
0.29
0.22
0.145
0.43
0.115
0.18
0.29
0.145
0.25
0.115
0.22
0.18
0.145
10/DS
(litre)
10
10
5.8
4.3
2.9
2.2
5.8
1.8
2.9
2.2
1.45
4.3
1.15
1.8
2.9
1.45
2.5
1.15
2.2
1.8
1.45
60/DS
(litre)
60
60
34.8
25.8
17.4
13.2
34.8
10.8
17.4
13.2
8.7
25.8
6.9
10.8
17.4
8.7
15
6.9
13.2
10.8
8.7
1/DS
(litre)
2.0
1.5
4.0
2.0
1.0
3.0
1.5
2.0
10/DS
(litre)
20
15
40
20
10
30
15
20
60/DS
(litre)
120
90
240
120
60
180
90
120
4 ball pump volume
Ratio
2:1
3:1
3,3:1
3,5:1
4:1
4,4:1
4,5:1
6:1
Lower
(cm³)
2000
1500
4000
2000
1000
3000
1500
2000
Air Motor
(cm³)
2200
2200
6500
3400
2200
6500
3400
6500
Air consumption NXT motor
Air Motor
(cm³)
2200
3400
6500
03/02/09
m³
1bar/
DS
4.4
6.8
13
m³
2bar/
DS
6.6
10.2
19.5
m³
3bar/
DS
8.8
13.6
26
m³
4bar/
DS
11
17
32.5
m³
5bar/
DS
13.2
20.4
39
m³
6bar/
DS
15.4
23.8
45.5
24 - 3
TECHNICAL DATA FOR HF 4-BALL PUMPS FOR HIGH FLOW RATE
Bulldog pumps 3:1
Models 243 737 and 243 743
Viscount II 600 pumps
Models 243 740 and 243 751
: 21 bar
Air operating range bar
: 2.8-7 bar
Theoretical stroke volume per DS: 2 litres
Recommended maximum double stroke number:
60 DS/min
Air input
: ¾” NPS(I)
Fluid inlet and outlet
: 2” npt(f)
Parts that contact the fluid
: Steel, stainless steel,
UHMWPE, PTFE, Viton® or stainless steel, UHMWPE, PTFE,
Viton®
: 41 bar
Maximum hydraulic oil inlet pressure: 103 bar
Theoretical stroke volume per DS : 2 Litre
60 DS/min
Hydraulic inlet
: ¾″ NPT(I)
Viton®
President Pumps 1.5:1
Models 220-562
King Pumps 3:1
Models 243 749 and 243 750
: 21 bar
Inlet air pressure
: 2.8-6.3 bar
60 DS/min
Air input
: ¾” NPS(I)
: 2” npt(f)
: Steel, stainless steel, UHMWPE,
PTFE, Viton® or stainless steel, UHMWPE, PTFE, Viton®
King Pumps 4:1
Models 243 739, 243 747 and 243 748
: 28 bar
Inlet air pressure
: 7.0 bar
Theoretical stroke volume per DS: 3 Litre
60 DS/min
Air input
: ¾” NPS(I)
: 2” npt(f)
King Pumps 6:1
Models 243 738 and 243 746
: 37 bar
Inlet air pressure
: 2.8-6.3 bar
Theoretical stroke volume per DS: 2 Litre
60 DS/min
Air input
: ¾” NPS(I)
: 2” npt(f)
Viscount II 300 Pumps
Model 243 755
Maximum hydraulic oil inlet pressure : 103 bar
: 21 bar
60 DS/min
Hydraulic inlet
: ¾” NPTS(I)
Parts that contact the fluid : Steel, stainless steel, UHMWPE,
Models 243 741 and 243 753
: 28 bar
Maximum hydraulic oil inlet pressure : 103 bar
60 DS/min
Hydraulic inlet
: ¾″ NPT(I)
Viton®
24 - -4
: 19 bar
Inlet air pressure
: 1.4-12.0 bar
Maximum flow rate
: 70 lpm
DS per litre
: 0.90
60 DS/min
Air input
: ½” NPS(I)
Fluid In
: 1 ½” NPT(I)
Primary fluid outlet
: 1 NPT(F)
: Model 220-562:
Stainless steel, polyethylene, leather, PTFE
President Pumps 2:1
Models 220-560 and 220-563
: 25.2 bar
Inlet air pressure
: 1.4-12.6 bar
Maximum flow rate
: 49.2 lpm
DS per litre
:1
60 DS/min
Air input
: ½” NPS(I)
Fluid in
: 1 ½” NPT(I)
: 1” npt(f)
Model 220-560: Normal steel,
stainless steel, polyethylene, leather, PTFE,
Model 220-563: Stainless steel,
polyethylene, leather, PTFE
President Pumps 3:1; 0.65 L/cycle
Models 220-561 and 220-564
: 34 bar
Inlet air pressure
: 1.4-11.0 bar
Maximum flow rate
: 37.1 lpm
DS per litre
: 1.60
60 DS/min
Air input
: ½” NPS(I)
Fluid in
: 1 ½” NPT(I)
: 1 NPT(F)
stainless steel, polyethylene, leather, PTFE
TECHNICAL DATA FOR HF 4-BALL PUMPS FOR HIGH FLOW RATE
Models 236 605 and 236 606
Bulldog Pumps 4:1; 1.5 L/DS
Models 220-577 and 220-578
: 21 bar
Maximum oil inlet pressure
: 103 bar
Maximum flow rate
: 55.6 lpm
DS per litre
: 1.1
Recommended maximum double stroke number : 60 DS/ min
Maximum temperature for the
hydraulic liquid
: 54°C
Hydraulic liquid inlet
: ⅞” - 14 UNF, 37°
Hydraulic liquid outlet
: ¾” - 14 UNF, 37°
Model 236 605: Normal steel,
Model 236 606: Stainless steel,
: 28 bar
Inlet air pressure
: 2.8-7.0 bar
Maximum flow rate
: 90.8 lpm
DS per litre
: 0.66
Recommended maximum double stroke number : 60 DS/ min
Air input
: ¾” NPS(I)
Fluid in
: 1 ½” NPT(I)
: 1” npt(f)
DELIVERY AND USAGE RANGE OF CHECK-MATE PUMPS
03/02/09
24 - 5
Fluid recirculation system without recirculation to spray gun (dead end)
Fluid recirculation system with pressure reduction as per the last
Removal location to the gun
Figure 1
Figure 2
Fluid recirculation system with separate ring line and recirculation to spray gun Figure 3
24 - 6
EXAMPLE OF A CENTRAL LUBRICATION SYSTEM
Lubricants can be delivered from drums 1 and 2 or tanks 3 and 4
5
6
7
8
9
10
11
Grease pump
Oil pump
Oil pump, underground tank
Hose reel
Dispensing gun
Manual filling station
Transportable units
SAMPLE INSTALLATION IN CENTRAL GREASE SUPPLY
Drum cover
horizontal
03/02/09
Elevator
side
Ram
Floor stand
24 - 7
Tank floor
assembly
OTHER GRACO PRODUCTS
Gun cleaning unit
Triumpf
Electrically operated
piston pumps
Model 244-105
Gun Flush Box
Manual 309 227
Gun holder
Model 112 634
Normal steel
polyethylene (tank)
Stainless steel, aluminium
brass, PTFE, Acetal
Model 112 635
Stainless steel aluminium
polyethylene (tank)
brass, PTFE, Acetal
198 405 PRO Xs3, Pro Xs4
198 787 PRO Xs2
196 768 PRO 3500, hc, 4500
196 769 Delta-Spray
196 770 Alpha-Gun
196 771 Alpha Plus & RAC
196 767 Devilb. JGA/MSA
15G 093 G15, AA
15G 346 G40, AA
15T 646 Air Pro Gun
Model 239 482
4-ball stainless
steel pump
(308 366)
(308 254)
(308 255)
(308 793)
Model 244 595
Check-Mate 450
Priming piston pump
(308 380)
Model 117 438
Stainless steel, brass
PTFE, Acetal
Also equipped with fed hand
cleaning brush and foot
opening for tank cover
Hydraulically operated
oil and grease pumps
Dyna Star
Model 224 741
(308 155)
101 108
5 gall. (19 Ltr.) container CS
115 077 plastic (Line-Lazer)
Dyna Star
Model 236 390
(308 390)
204 134
10 gall. (38 Ltr.)
container CS
Power Star
Model 236 754
(308 391)
TTANK ASSEMBLY KIT
948 393 assembly kit for Fire Ball pumps
948 392 assembly kit for President pumps
512 874 coupler 3” NPT(I)
Tank
Assembly kit
Coupler
3” NPT(I)
tank connection
24 - 8
Dyna Star
Model 236 752
(308 156)
Turbine pump
Free standing
Corrosion protected or
for fluids based on water
(308 059)
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
GRACO LOCATIONS
CONTACT
AMERICAS
EUROPE
MAILING ADDRESS
MINNESOTA
BELGIUM
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612.623.6000
Fax: 612.623.6777
Worldwide Headquarters
Graco Inc.
88-11th Avenue N.E.
Minneapolis, MN 55413
European Headquarters
Graco N.V.
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32.89.770.700
Fax: 32.89.770.777
ASIA PACIFIC
ASIA PACIFIC
ASIA PACIFIC
JAPAN
CHINA
KOREA
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81.45.593.7300
Fax: 81.45.593.7301
Graco Hong Kong Ltd.
Representative Office
Room 118 1st Floor
No.2 Xin Yuan Building
No.509 Cao Bao Road
Shanghai, P.R. China 200233
Tel: 86.21.649.50088
Fax: 86.21.649.50077
Graco Korea Inc.
Choheung Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-Si, Gyunggi-Do,
Korea 431-060
Tel: 82(Korea).31.476.9400
Fax: 82(Korea).31.476.9801
All written and visual data contained in this document are based on the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Graco is certified ISO 9001.
Europe
+32 89 770 700
FAX +32 89 770 777
WWW.GRACO.BE
©2008 Graco N.V. Form No. 303190E Rev. C 8/08 Printed in Europe.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

303190E , Product Selection Guide, Equipment, Spare Parts

Transcription

Similar documents

Ltsrs) rr{

The Premium Choice in Landscape Lighting™ Kichler Catalog.

312713N - Check-Mate®- Pumpensysteme, Anleitungen