product update - SEBO Australia

Transcription

product update - SEBO Australia
Product Update - PCB printed circuit boards changes SEBO Vacuums
View this email in your browser
PRODUCT UPDATE
** IMPORTANT INFORMATION **
Shortly, the PCB printed circuit boards of our SEBO AUTOMATIC X4/5 and SEBO AUTOMATIC XP1/2/3
machines will be changed to an advanced state-of-the-Art version. This refers to the PCB 12V POWER
SUPPLY (#5193ER) and COMPUTER CONTROLLER (#5740ER).
What is going to change?
- Old and new versions will not be able to inter-operate with each other, i.e. old and new PCB generations can
only be operated together as a set. However, the spare parts supply with PCBs of the old generation is
secured for the next few years. When in doubt, the new Version should be used as a set of both boards for
replacements.
- In terms of a clear differentiation, both new PCBs will receive new part numbers.
- As the new PCBs no longer provide a galvanic isolation, they will possibly be under electric power and must
not be touched. Therefore it is most important to turn off and unplug the machine before any
maintenance is carried out. For safety reasons it is essential that any maintenance must be done by an
authorised service technician.
- The new computer controller will be equipped with high-grade LED lights. These will shine brighter than
before and will be highly visible.
When exactly does the changeover take place?
Effective immediately for the X4 with all other machines above progressively upgrading with full change over
complete by 2016.
Of course we will provide adjusted parts manuals on our homepage www.sebo.com.au
If in doubt do not hesitate to contact us with Serial No. to correctly identify the PCB required.
Details correct at time of printing. Technical details subject to change without notice
Copyright © 2015 SEBO Australia, All rights reserved.
Comparison PCBs
--------------------------------------------------------------------------------------------------------------------------------------
New version PCB 12V POWER SUPPLY (Art.No. 5847ER)
New version COMPUTER CONTROLLER (Art.No. 5849ER)
SEBO Australia Pty Limited
Email: [email protected]
Ph: +61 (0)2 9678 9277
SEBO AUTOMATIC X 5
WHITE - 240 V-Australia
MADE IN GERMANY
Pos. Art.-No. Benennung (DE)
4
3
1 5642AU
2
15
5
6
7
1
10
9
8
12
16
11
13
48
27
14
14
17
18
19
22
30 32 33
23
24
25
26
37
36
34
20
21
35
38
40
26
25
41
14
39
43
23
47
28
29
44
45
14
31
47
9
49
Art.-No. 06568N, 01/2016-1
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
43
44
45
46
47
48
49
50
46
24
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
50
Handle cpl. grey black/white
with Australian power cord
5297gsSE Handle grip (incl. Pos. 7+10)
5359GS Grommet, grey black
5390dg Cable with Australian plug
05113
Switch, 2-pol, Spare part
5160we Switch cap, white
5161gs Switch cap holder, grey black
5162
Cable clamp
0103ER Screw C 3,9x16, DIN 7981
5253-1 Wire antistatic
5216ER Handle cable
0129ER Screw M 4x12
5187
Handle tube X / 345mm
0102ER Screw F 3,9x13 DIN 7981
5040sb Hose, complete, silver
5045gs Extension tube, grey black
5707we Cover, white
5319
Bag holder spring
5706gs Cover release, grey black
5091
Safety catch spring
5360
Safety catch
5324
Bag holder, complete
(incl. Pos. 20+21)
50750SE Front cover cpl., white/grey black
5093ER Sebo Filterbox X
5036ER Micro hygiene filter X
5380GS Internal cover, cpl., grey black
(incl. Pos. 40+41)
1073
Clamp
5208
Filter safety catch
5210
Return spring
5164
Cable clamp
5722gs Dust bag housing locking, grey bl.
1859gs Handle catch, grey black
0161ER Clip 4, DIN 6799
5721we Carrying handle, white
5703we Cable hook, white
5146
Stop spring
5424GS Retainig ring, grey black
5217ER Innternal cable
5266
Cable clamp
5842
Seal 54x44x6
5289
Seal
1823gs Attachment clip, grey black
5084
Spring for locking rod
5163
Seal
5083
Locking rod
5702we Dust bag housing bumper base,wht
5755we Dust bag housing X, cpl.,
white/grey black
1092gs Crevice nozzle, grey black
1491gs Upholstery nozzle, grey black
SEBO AUTOMATIC X 5
WHITE - 240 V-Australia
MADE IN GERMANY
100
Pos. Art.-No. Benennung (DE)
165
101
103
102
Down
Up
Ch
Brusheck
Ba
ful g
clog l or
111
108
106
158
109
141a
106 107
104
141
142
143
105
110
106
113
144
112
145
146
148
149
147
159
115
106
150
117
116
114
120
118
115
119
121
106
122
123
151
124
126
140
135
153
164
156
157
160
162
127
128
161
125
129
130
129
130
138
137
138
137
119
152
155 154 163
131
132
133
106
136
139
134
Art.-No. 06568N, 01/2016-2
100 5791SE Power head cover,cpl., X5,
white / greyblack
101 5712we Exhaust filter catch, white
102 5143
Exhaust filter
103 5711we Exhaust filter cover, white
104 5729hg Swivel neck assembly,
(incl. Pos.105)
105 5176
Male contact holder
106 0102ER Screw F 3,9x13 DIN 7981
107 2494
Cable clamp
108 5101
Swivel neck bearing r.h.
109 5178
Swivel neck support r.h.
110 5728
Swivel neck support l.h.
111 5717
Swivel neck bearing l.h.
112 5847ER PCB power supply
113 5205/1 Ribbon cable
114 5713we Brush roller release, white
115 5103
Spring 0,6x5x22
116 5051gs Axle assembly, cpl.
117 5059or Foot pedal, orange
118 5053
Axle
119 5819gs Wheel, cpl., grey black
120 2010
Axle spring
121 2014ER Axle clamp, 10 pcs.
122 5031we Bearing block right hand
grey black/white
123 5290ER Brush roller set X5
124 5230gs Bumper X5, grey black
125 5155gs Rubbing plate, grey black
126 5172OR Access door cpl., orange
(incl. Pos.127+128)
127 5303
Access door axle
128 5304
Access door spring
129 5154gs Hinge
130 0100ER Screw C 2,9x9,5 DIN 7981
131 0176ER Screw AM 4x30 DIN 7985TL
132 5174gs Pile adjustment wheel, grey black
133 5060ER Servo motor with gear box
134 5413gs Front bottom plate X5, cpl., grey bl.
135 5414gs Rear bottom plate X5, cpl., grey bl.
(incl. Pos. 136+139)
136 5400-2 Sealing strip X5
137 5401
Wire tie
138 5402
Wire tie
139 0197ER Screw M4x12 Z1
140 5321gs Chassis X5, cpl., grey black
141 5471
Vacuum motor 1000W/240V
141a 05118S Carbon brush set
142 5100
Rubber mounting
143 5462
Vacuum motor pulley 2MR
144 5129
Support lever
145 5107-1 Support spring
146 5112sw Motor pulley cover
147 5849ER Computer controller
148 0107ER Screw C 2,9x13
149 0143ER Washer 3,2 DIN 125
150 5173sw Suction duct access cover
151 5465
Sensor X5, cpl.
152 0104ER Screw C 3,9x25 DIN 7981
153 5463
Belt 2MR-310-6
154 5110
Belt 219 3M HTDII-6
155 5767hg Bearing block l.h., cpl.
156 0103ER Screw C 3,9x16 DIN 7981
157 0141ER Locking washer
158 5018UL Motor cover
159 5714we Brush roller release, white
160 5244hg Seal bearing
161 5249we Brush cover, white
162 5250
Egde brush
163 5246
Shaft extension cpl.
164 5117/1 Motor pulley
165 01751ER Screw 2,9x6,5 DIN x7981
Readjustment of the filter indicator - X Series
Please note: The computer controller will be delivered pre-adjusted with standard values. If a readjustment seems to be necessary this may be done on site as listed below:
1. Plug in the machine and pull out the hose. Attach the white cap (5429WE) to the end of the hose.
2. Switch on an electric torch (not included in delivery) and illuminate the LED above “Check Brush”.
3. Turn on the machine and the LED “Bag full” will light up in red. Torch can be removed. When the red
LED “Bag full” turns off the automatic readjusting is finished.
4. Turn off the machine and remove the white cap from the hose.
05/2015/ 06236R
www.sebo.com.au
[email protected]
Ph: +61 (0)2 9678 9577
S:\Operations\Tech support & parts variation\XP & X4_X5 Series\Readjustment of the filter indicator X Series
1

Similar documents

230 /240V

230 /240V DUST BAG HOUSING BUMPER BASE DUST BAG HOUSING LOCKING CATCH LOCKING ROD, DUST BAG HOLDER DUST BAG HOUSING COMPLT 100 SR UPHOLSTERY NOZZLE CREVICE NOZZLE

More information

SEBO AUTOMATIC XP 3

SEBO AUTOMATIC XP 3 Axle Wheel, cpl. Axle spring Axle clamp Bearing block r.h.dk/Light-grey Brush roller set XP 3 Bumper, set Rubbing plate Access door cpl. Access door axle Access door spring Hinge Screw C 2,9x9,5 Sc...

More information

Untitled - Windsor Vacuums

Untitled - Windsor Vacuums Crevice Nozzle Clip Dusting Brush Upholstery Nozzle Wall and Upholstery Brush

More information