Geberit Inlet Valves

Geberit Inlet Valves
CL
WL
Impuls380
Fors
Fors Inlet valve for bottom connection
1/2” Art. No. 222.100.00.1
3/8” Art. No. 222.101.00.1
The Geberit Fors cistern inlet valve can be used world wide thanks to different connection versions and
because of the large pressure range in which the filling valve operates: 10-1000 kPa (0.1 to 10 bar). All parts
exposed to pressure are entirely made from PBT, a chlorine and acid resistant material.
92
96
25
CL
71
CL
WL
Min. 235
max. 385
WL
Waterline
min. 146
max. 296
CL
CL
WL
WL
41.5
G 1/2"
min.9 / max.15
G 3/8"
Art. No. 222.100.00.1
Art. No. 222.101.00.1
Service and spare parts
Geberit Fors cistern inlet valve is maintenance friendly. In the event of a blockage, the silicone diaphragm and
lever part can be easily removed without tools for cleaning. The spare part is supplied as a kit (diaphragm,
insert, cover and lever) in one package. After any maintenance or replacement of the valve, make sure that
the fill and spill level of the cistern is correctly adjusted.
02
Art. No.
Description
241.813.00.1
Diaphragm and lever
Impuls380 Inlet Valve 3/8” Art. No. 222.011.00.1
The Geberit Impuls380 inlet valve Art. No. 222.011.00.1 with short 3/8” nipple is used in many imported toilet
suites. The Impuls380 cistern inlet valve has an operating pressure range from 10 to 1000 kPa (0.1 to 10 bar).
The valve is designed for fast and quiet filling action.
Importante note: When the complete inlet valve is replaced make sure that the fill and spill level of the cistern
is correctly adjusted. If the old Servo valve was clipped to the overflow pipe of the Geberit outlet valve, the
existing clip has to be replaced with a new clip Art. No. 170.393.00.1.
29
112
30
G 3/8”
243
212
49
Service and spare parts
Geberit Impuls380 cistern inlet valve is maintenance friendly. In the event of a blockage, the silicone diaphragm
and lever part can be easily removed without tools for cleaning. The spare part is supplied as a kit (diaphragm,
insert, cover and lever) in one package. The connector nipple including nut is also available as a spare part.
Art. No.
Description
170.360.00.1
Diaphragm and lever
Art. No.
Description
880.781.00.0
3/8” Connector nipple short, incl. seals for Unifill
Art. No.
Description
170.393.00.1
Inlet valve clip
03
Impuls380 Inlet Valve 1/2” Art. No. 222.012.00.1
The Geberit Impuls380 cistern inlet valve Art. No. 222.012.00.1 with 1/2” nipple is used in some Geberit cisterns
or as a general 1/2” inlet valve. The Impuls380 cistern inlet valve has an operating pressure range from 10 to
1000 kPa (0.1 to 10 bar). The valve is designed for fast and quiet filling action.
48
112
30
G 1/2”
243
212
49
Service and spare parts
Geberit Impuls380 cistern inlet valve is maintenance friendly. In the event of a blockage, the silicone diaphragm
and lever part can be easily removed without tools for cleaning. The spare part is supplied as a kit (diaphragm,
insert, cover and lever) in one package.
04
Art. No.
Description
170.360.00.1
Diaphragm and lever
Impuls380 Inlet valve 3/8” Art. No. 222.026.00.1
The Geberit Impuls380 cistern inlet valve Art. No. 222.026.00.1 with long 3/8” stratos nipple is used in a number
of cisterns from Caroma and Villeroy & Boch. The Impuls380 cistern inlet valve has an operating pressure range
from 10 to 1000 kPa (0.1 to 10 bar). The valve is designed for fast and quiet filling action.
Important note: When the complete inlet valve is replaced make sure that the fill and spill level of the cistern is
correctly adjusted.
112
46
30
G 3/8”
50
243
212
49
Spare parts and service
Geberit Impuls380 cistern inlet valve is maintenance friendly. In the event of a blockage, the silicone diaphragm
and lever part can be easily removed without tools for cleaning. The spare part is supplied as a kit (diaphragm,
insert, cover and lever) in one package. After any maintenance or replacement of the valve, make sure that the
fill and spill level of the cistern is correctly adjusted.
Art. No.
Description
170.360.00.1
Diaphragm and lever
05
Impuls380 Bottom-Entry Inlet Valve 1/2” Art. No. 240.884.00.1
The Geberit Impuls380 cistern bottom-entry inlet valve Art. No. 240.884.00.1 with hose and 1/2” nipple is
manufactured for use with the Geberit outlet valve. It fastens onto the overflow pipe of the outlet valve via the
supplied clip. The Impuls380 cistern inlet valve has an operating pressure range from 10 to 1000 kPa (0.1 to 10
bar). The valve is designed for fast and quiet filling action.
400
50
G 1/2”
Spare parts and service
The Geberit Impuls380 cistern inlet valve is maintenance friendly. In the event of a blockage, the silicone
diaphragm and lever part can be easily removed without tools for cleaning. The part is supplied as a kit
(diaphragm, insert, cover and lever) in one package. After any maintenance or replacement of the filling valve,
make sure that the fill and spill level of the cistern is correctly adjusted.
06
Art. No.
Description
170.360.00.1
Diaphragm and lever
Art. No.
Description
170.393.00.1
Inlet valve clip
Impuls380 Rear-Entry Inlet Valve Art. No. 222.013.00.1
The Geberit Impuls380 cistern rear-entry inlet valve Art. No. 222.013.00.1 with 300mm long hose and 3/8”
female connection is manufactured for use with the Geberit outlet valve. It fastens onto the overflow pipe of the
outlet valve via a clip Art. No. 170.393.00.1 (clip has to be ordered separately). Impuls380 rear-entry Art. No.
222.013.00.1 can also be used with the Geberit UP170 concealed cistern. The Impuls380 inlet valve has an
operating pressure range from 10 to 1000 kPa (0.1 to 10 bar). The valve is designed for fast and quiet filling
action.
G 3/8”
Spare parts and service
The Geberit Impuls380 cistern inlet valve is maintenance friendly. In the event of a blockage, the silicone
diaphragm and lever part can be easily removed without tools for cleaning. The spare part is supplied as a kit
(diaphragm, insert, cover and lever) in one package. The rear-entry hose is also available as a spare part. After
any maintenance or replacement of the valve, make sure that the fill and spill level of the cistern is correctly
adjusted.
Art. No.
Description
170.360.00.1
Diaphragm and lever
Art. No.
Description
240.989.00.1
Rear-entry hose with 3/8” female nut (l = 300mm)
Art. No.
Description
170.393.00.1
Inlet valve clip
07
Impuls380 Servo Valve Replacement Set Art. No. 222.018.00.1
There were two models of the Geberit Servo filling valves with different length nipples sold in Australia. Referred to
below as A & B. Model A was extensively used in imported toilet suites such as Villeroy & Boch, Duravit etc. Model
B mainly in Caroma Suites. The Servo valve and spare parts are no longer available. A replacement set including
Impuls380 cistern inlet valve and adaptor is available.
Warning: Upon replacement of filling valve, the installer must ensure the cistern fill and spill level is
correctly adjusted!
The details below will assist in the Servo valve identification and replacement.
A
Most Geberit Servo valves
have a blue cap. Other
parts are white and grey.
The Geberit name
and Watermark is also
on this cap.
La
Lubricant
A) Short nipple La= 33 mm
Two different length and
shape nipples
.
B
B) Long nipple Lb= 50 mm
Lb
2
1
Close stop valve and remove
old Servo valve
3
Lubricate all rubber rings
A) Align insert and push
into opening
B) Install O-ring as
shown
Install new inlet valve and open stop valve
Note: Unifill inlet valve works from low
pressure (10kPa) to high pressure
(1000kPa)
Accessories
If the old servo valve was clipped to the overflow pipe of the Geberit outlet valve, the existing clip has to be replaced
with a new clip Art. No. 170.393.00.1.
08
Art. No.
Description
170.393.00.1
Inlet valve clip
Impuls380 Service
1
2
Close stop valve(1) & remove
valve(2).
Unclip spindle from lever.
Undo diaphragm cover (1/4 turn).
Remove diaphragm cover.
Wash diaphragm and cover with
clean water.
Align diaphragm with insert.
Assemble diaphragm insert and
cover. Note: This membrane
assembly is only suitable for
Impuls380 inlet valves.
Insert assembly into housing.
Lock assembly into housing 1/4 turn.
Click spindle into lever.
Re-install inlet valve. Open
stop valve.
Check and adjust the filling level.
Warning! Upon maintenance or replacement of filling valve, the installer must ensure the cistern fill and
spill level is correctly adjusted and complies with AS 1172.2 and AS/NZS 3500.1.
09
Fors Service
CL
WL
Close stop valve.
Undo diaphragm cover (1/4 turn).
Remove diaphragm cover.
Wash diaphragm with clean water.
Note: This membrane assembly
is only suitable for Fors bottom
Inlet valve!
Ensure diaphragm is aligned with
insert.
Assemble diaphragm insert
and cover.
Note: Fors is also fitted with a filter
which might need cleaning.
CL
WL
Lock assembly into housing
Remove water connector,
check filter.
Wash filter.
Re-insert into valve.
Open stop valve.
Check and adjust the filling level.
Warning! Upon maintenance or replacement of filling valve, the installer must ensure the cistern fill and
spill level is correctly adjusted and complies with AS 1172.2 and AS/NZS 3500.1.
10
GEAU037/09
Geberit Pty Ltd
T: (02) 9889 7866
F: (02) 9889 7855
E: [email protected]
www.geberit.com.au