docSpeedUp Eco Heat Panels
download 
Report Transcription
SpeedUp Eco Heat Panels
Data Sheet SpeedUp Eco Heat Panels Application SpeedUp Eco heat panel CZ SpeedUp Eco heat panel EZ SpeedUp Eco alum. header panel EZ SpeedUp Eco header panel CZ SpeedUp Eco header panel CO SpeedUp Eco corner 90° panel The Danfoss SpeedUp Eco system is a universal and optimum floor heating system for all new and old buildings. SpeedUp Eco is suitable for ecological single and multi-family dwellings, timber and prefabricated houses, commercial premises, and for retrofitting in all restoration work. Technical Data Max. value for surface roughness, according to DIN 18202, Line 4 Reference 0.1 m 1m 4m Prepared floors with extra requirements, 1 mm 3 mm 9 mm e.g. with filler Materials Base material SpeedUp heat panel Thermal conductivity Thermal resistance (R) Water vapour diffusion factor Compressive strength Building calassification Ordering 10 m 15 m 12 mm 15 mm Wood fibre, 140 kPa (manufactured according to DIN EN 13171) Aluminium, 0.5 mm, with Ω-shaped pipe channels, crimped 0.040 W/mK 0.75 m² K/W 5 ≥ 140 kPa at 10% compression, according to DIN EN 826 B2 Product Type SpeedUp Eco heat panel comfort zone, CZ SpeedUp Eco heat panel edge zone, EZ SpeedUp Eco header panel, CZ SpeedUp Eco header panel, EZ SpeedUp Eco header panel, CO SpeedUp Eco blank panel, BP SpeedUp Eco supply/return panel single SpeedUp Eco corner 90° panel SpeedUp Eco header panel (alu), CZ SpeedUp Eco header panel (alu), EZ Danfoss Heating Solutions The Danfoss 16 x 2 mm composite pipe laid into the SpeedUp Eco heat panels at laying distances of 125/ 250 mm provides a tailored heat output. The composite pipe is fastened and fixed into Ωshaped pipe channels of the prefabricated aluminium clad heating slats. An even floor is required. VDCSA502 © Danfoss FH-SEA FH-SEB FH-SEC FH-SED FH-SEE FH-SEF FH-SEG FH-SEH FH-SBL FH-SAL 06/2012 Dimensions [L x Wx H] 1000 x 500 x 30 mm 1000 x 500 x 30 mm 250 x 500 x 30 mm 250 x 500 x 30 mm 250 x 375 x 30 mm 1000 x 500 x 30 mm 1000 x 125 x 30 mm 250 x 250 x 30 mm 250 x 500 x 30 mm 250 x 500 x 30 mm Code no. 088X0201 088X0202 088X0203 088X0204 088X0205 088X0206 088X0207 088X0208 088X0211 088X0212 1 Data Sheet Accessories SpeedUp Eco Heat Panels Type Dimensions [L x Wx H] Code no. SpeedUp heating plate (alu) FH-SI 495 x 242 x 0.5 mm 088X0110 SpeedUp load bearing (steel) FH-SJ 800 x 200 x 1 mm 088X0111 SpeedUp Eco perimeter insulation FH-SEK 25 m x 140 mm x 10 mm 088X0123 SpeedUp Eco system foil FH-SEL 80 m x 1.25 m x 0.2 mm 088X0131 Support Batten FH-SFE 1000 x 45 x 30 mm 088X0134 Ball nose routing bit for SpeedUp Eco FH-TON - 088X613 Product Danfoss A/S Heating Solutions Haarupvaenget 11 8600 Silkeborg Denmark Phone:+45 7488 8000 Fax: +45 7488 8100 Email: [email protected] www.heating.danfoss.com Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss Heating Solutions and the Danfoss Heating Solutions logotype are trademarks of Danfoss A/S. All rights reserved. 2 VDCSA502 © Danfoss 06/2012 Danfoss Heating Solutions