Bath Brochure - Lyons Industries

Transcription

Bath Collection
Contour™ Series
Contour™ Walls
•Spacious 4" deep shelves for all your
bathing supplies
• Innovative design hides seams
• No caulk assembly
• Installs direct to studs
•Walls also fit Lyons Elite™
and Linear™ Bathtubs
•Wall kits sold separately; may also be
used on other manufacturers’ bathtubs
• Innovative design drains water away from apron corners
•Durable fiberglass construction with
High Gloss acrylic finish is scratch,
impact resistant and easy to clean
• Install direct to studs
Heated Soaker Features
•Pump gently circulates warm water
without the noise of multiple jets
•Factory plumbed, ready to install
Contour™ Bathtubs
Whirlpool Features
•Spacious bathing area with curved
front and lumbar support for
superior comfort
• Curved front provides spacious bathing area
•Eight directional massaging jets
• In-line heater also available
1
All our products are proudly
5 Year Consumer, 2 Year
Commercial Warranties
60" x 32" x 59" and 60" x 30" x 59"
Contour™ Wall Kit
60" x 32" x 59" and 60" x 30" x 59"
Contour™ Tile Wall Kit
•Smooth Walls - Two spacious
4" deep center shelves
•Tile Walls - Four spacious
4" deep corner shelves
1”
Flange
32” or 30”
32” or 30”
1”
Flange
575⁄8” Door
Opening Width
567⁄8” Door
Opening Width
59”
Door
Height
59”
Door
Height
361⁄16”
32”
109⁄16”
10”
60”
60”
f
(le
Water-Proof Gasket
(Magnified View)
el)
an
ep
id
ts
(ba
ck
pa
ne
l)
Innovative wall design
adjusts for out-of-square
alcoves and hides seams.
No caulk required.
60" x 32" x 19" Contour™ Bathtub
•Bathtub
• Heated Soaker
• 8-Jet Whirlpool
• Left or Right Drain
Alcove Dimensions
1”
Flange
56”
15-11/16"
Junction Box
10"
6"
34”
2811⁄16”
*GFI Electrical
Outlet
19”
33½"
8-3/4"
Drain CL
Floor Cut Out (6" x 10")
20”
60"
597⁄8”
* Optimum
GFI receptacle
locations.
Actual locations
vary may
* Optimum
GFI receptacle
locations.
Actualmay
locations
varydepending
on your
stud layout.
depending
on your stud
layout.
A second
GFI receptacle
is required
if whirlpoolifhas
an in-linehas
heater.
A second
GFI receptacle
is required
whirlpool
an
in-line heater.
= Stud location
317⁄8”
(cross section)
Drain, Overflow and
Faucet sold separately.
Left Drain placement mirrors
Right Drain measurements.
3” diameter support feet,
7/16” OSB and fiberglass for
maximum stability.
2
Linear™ Series
• Sleek, contemporary design
• Innovative design drains water away from apron corners
• Generous 25" x 42" bathing area
• 30˚ lumbar support
• High Gloss acrylic surface is easy to clean
• Stain and chemical resistant
• Bathtub installs direct to studs
• Suitable for tile applications
•AFR - Above Floor Plumbing,
SFR - Standard Floor Plumbing
Whirlpool Features
• Fits 60” x 32” or 60" x 30" alcove
3
60" x 36" x 21" AFR Linear™
60" x 36" x 19" SFR Linear™
•Bathtub
• Heated Soaker
•Bathtub
• Heated Soaker
• 8-Jet Whirlpool
1”
Flange
53”
29”
25”
• 8-Jet Whirlpool
1”
Flange
53”
25”
19”
or 21”
20”
or 22”
19”
20”
597⁄8”
597⁄8”
317⁄8”
or 297⁄8”
357⁄8”
Alcove Dimensions
1715⁄16"
11"
8¾"
= Stud location
16”
Junction Box
6"
37½"
Alcove Dimensions
Right Drain placement mirrors
Left Drain measurements.
*GFI Electrical
Outlet
Drain CL
Junction Box
11”
6”
33-1/2”
*GFI Electrical
Outlet
9”
60"
60”
* Optimum GFI receptacle locations. Actual locations may vary
depending on your stud layout.
* Optimum GFI receptacle
A second GFI receptacle is required if whirlpool has an in-line heater.
* Optimum GFI receptacle locations. Actual locations may vary
locations. Actual locations may varydepending
on
depending
on your
your studstud
layout. layout.
60" x 32" x 16 ½" SFR Linear™
60" x 30" x 16 ½" SFR Linear™
•Bathtub
• Heated Soaker
•Bathtub
• Heated Soaker
• 8-Jet Whirlpool
• 8-Jet Whirlpool
1½” wide
ledge
3½” wide
ledge
1”
Flange
53”
25”
1”
Flange
53”
25”
16½”
or 19”
17½”
or 20”
597⁄8”
597⁄8”
30¼”
32¼”
Alcove Dimensions
11”
Junction Box
16”
6”
33½”
9”
16½”
or 19”
17½”
or 20”
Alcove Dimensions
*GFI Electrical
Outlet
Drain CL
60”
11”
= Stud location
Floor Cutout (6” x 11”)
Junction Box
16”
6”
33½”
9”
*GFI Electrical
Outlet
Drain CL
60”
* Optimum GFI receptacle locations. Actual locations may varydepending on your stud layout.
Drain, Overflow and
4
Elite™ Series
5
No Caulk. Easy to Clean. Spacious.
Elite™ Corner Shelf Walls
el)
an
•Elite™ walls offer spacious
4” deep shelves
f
(le
p
ide
ts
(ba
ck
pa
ne
l)
•Innovative design hides seams
•No caulk assembly
•Installs direct to studs
•Wall kits sold separately;
may also be used on other
manufacturers' bathtubs
Water-Proof Gasket
(Magnified View)
No caulk required.
Elite™ Bathtubs
•30˚ lumbar support and arm rests
designed for your comfort
•Slip resistant bottom for showering
•High Gloss acrylic surface is easy to clean
•Stain and chemical resistant
•Innovative design drains water away
from apron corners
•Reinforced integral apron with brace
and gussets
3” diameter support
feet, 7/16” OSB and
fiberglass for
maximum stability.
(cross section)
Whirlpool Features
Drain, Overflow and
6
66" x 32" x 19" AFR Elite™
60" x 32" x 19" SFR Elite™
•Bathtub
• 8-Jet Whirlpool
•Bathtub
• 8-Jet Whirlpool
• Heated Soaker
• Heated Soaker
1”
Flange
61 7⁄16”
261⁄8”
1”
Flange
557⁄16”
261⁄8”
19”
19”
20”
20”
657⁄8”
597⁄8”
317⁄8”
317⁄8”
Alcove Dimensions
153⁄16”
Alcove Dimensions
153⁄16”
11”
6”
33-1/2”
GFI Electrical
Outlet
33-1/2”
GFI Electrical
Outlet
8¾”
8¾”
60”
66”
= Stud location
11”
6”
= Stud location
60" x 30" x 19" AFR Elite™
60" x 30" x 16" SFR Elite™
54" x 30" x 19" AFR Elite™
•Bathtub
• Heated Soaker
•Bathtub
• Heated Soaker
• 8-Jet Whirlpool
1”
Flange
557⁄16”
241⁄8”
241⁄8”
• 8-Jet Whirlpool
1”
Flange
497⁄16”
261⁄8”
241⁄8”
16” or
19” 17” or
19”
20”
20”
597⁄8”
537⁄8”
297⁄8”
297⁄8”
Alcove Dimensions
143⁄16”
Alcove Dimensions
GFI Electrical
Outlet
11"
11”
6”
31-1/2”
8¾”
6"
31½"
8¾"
60”
= Stud location
143⁄16"
Drain CL
54"
= Stud location
7
32” or 30”
1”
Flange
Elite™ Corner Shelf Wall
60" x 32" x 59" and 60" x 30" x 59"
• Spacious 4" deep shelves
567⁄8”
Door Opening
• Easy, direct to stud installation
59”
Door
Height
•May also be used on other
36½”
16”
60”
30”
1”
Flange
54" x 30" x 59"
507⁄8”
567⁄8”
Door Opening
59”
Door
Height
36½”
16”
54”
1”
32” or 30” Flange
Elite™ Center Shelf Wall
60" x 32" x 59" and 60" x 30" x 59"
567⁄8”
567⁄8”
Door
Door Opening
Opening
59”
Door
Height
25”
10”
10”
60”
Drain, Overflow and
8
Victory™ Series
Elite™ Corner Shelf Walls
f
(le
t
e
sid
l)
ne
pa
(ba
ck
pa
ne
l)
• Wall kits sold separately;
may also be used on other
9
Water-Proof Gasket
(Magnified View)
No caulk required.
Victory™ Bathtubs
• Head and Lumbar support for bathing
• Slip resistant bottom for showering
• Innovative design drains water away
from apron corners
• Easy to install for both new
construction and remodel projects
fiberglass for
maximum stability.
(cross section)
•One low pressure port gently
circulates warm water without
the noise of multiple jets
Whirlpool Features
Nested walls ready to ship!
Victory Contractor Packs
™
• Less Packaging Waste
• Easy to install
• Great for job sites
• Walls shipped nested in packs of 5
•Bathtubs include recyclable sump
floor protector
•Bathtubs shipped nested in packs
of 5 Left Drain or 5 Right Drain
Nested bathtubs
• Available as Bathtub only
Nested bathtubs ready to ship!
Drain, Overflow and
10
60" x 30" x 16" AFR Victory™
60" x 30" x 14" SFR Victory™
1”
Flange
557⁄16”
•Bathtub
241⁄8”
241⁄8”
16”
•Heated Soaker
17”
•8-Jet Whirlpool
597⁄8”
297⁄8”
Alcove Dimensions
143⁄16”
11”
6”
1”
Flange
557⁄16”
31-1/2”
241⁄8”
241⁄8”
8¾”
14”
15”
60”
= Stud location
* Optimum GFI receptacle locations. Actual locations may
varydepending on your stud layout.
A second GFI receptacle is required if whirlpool has an
in-line heater.
597⁄8”
297⁄8”
54" x 27" x 16" AFR Victory™
54" x 27" x 14" SFR Victory™
1”
Flange
497⁄16”
•Bathtub
241⁄8”
221⁄16”
• 3-Jet Whirlpool
16”
17”
537⁄8”
Alcove Dimensions
10"
267⁄8”
12½"
6"
28½"
7½"
1”
Flange
497⁄16”
241⁄8”
221⁄16”
Drain CL
14”
15”
54"
= Stud location
* Optimum GFI receptacle locations. Actual locations may
in-line heater.
11
537⁄8”
267⁄8”
30”
1”
Flange
60" x 30" x 59"
567⁄8”
Door Opening
59”
Door
Height
36½”
16”
60”
1”
30” Flange
Elite™ Center Shelf Wall
60" x 30" x 59"
567⁄8”
567⁄8”
Door
Door Opening
Opening
59”
Door
Height
25”
10”
10”
60”
27”
1”
Flange
54" x 27" x 59"
507⁄8”
567⁄8”
Door Opening
59”
Door
Height
36½”
16”
54”
Drain, Overflow and
12
SeaWave V™ Series
• Space saving corner design
• 18" tall corner seat area
• Spacious bathing well
• Slip resistant area for showering
• Wall kit includes curved curtain rod
• High Gloss acrylic finish
13
Whirlpool Features
•Four directional massaging jets
48" x 48" x 52" SeaWave V™ Wall
48”
48”
•Spacious, 4" deep shelves
1”
Flange
35½”
21½”
52”
Door
Height
el)
an
t
lef
73”
(
p
ide
(ba
ck
s
pa
ne
l)
21”
Water-Proof Gasket
(Magnified View)
No caulk required.
48" x 48" x 20" SeaWave V™
•Bathtub
Alcove Dimensions
• Heated Soaker
49” 33”
17”
9”
9”
• 4-Jet Whirlpool
17”
33” 49”
16”
• Rear Center Drain
13½”
Floor cutout
for plumbing
6”
6
*GFCI Electrical
Outlet
56-1/4”
Front of Tub
* Optimum GFCI receptacle locations. Actual locations may vary depending on your stud layout.
* Optimum
GFI
receptacle
Actual
locations may
A second GFCI
receptacle
is requiredlocations.
if whirlpool has an
in-line heater.
in-line heater.
= Stud location
Drain, Overflow and
fiberglass for
maximum stability.
(cross section)
14
Drop-In Series
Drop-In Styles
•Lumbar support and arm rests
designed for your comfort
• Slip resistant bottom for showering
•
High Gloss acrylic is easy to clean, stain
and chemical resistant
•Drop-In bathtubs designed for
island installation
•Easy to install for both remodel
projects and new construction
15
Inline Heater Options
• Factory Installed
• Sold Separately
Jet Trim Options
• Color code replaces "yy" in SKU
• 00 Color Matched • 01 Chrome
Whirlpool Features
Available Sizes
• 72" x 42" Rectangle Design
• 60" x 60" Corner Design
72" x 42" x 21" AFR Drop-In
72" x 42" x 19" SFR Drop-In
•Bathtub
• Heated Soaker • 8-Jet Whirlpool
Alcove Dimensions
72”
42”
15⁄8”
173⁄8” 19” or
or 193⁄8” 21”
= Stud location
66" x 34" x 22" AFR Drop-in
66" x 34" x 20" SFR Drop-in
•Bathtub
• Heated Soaker • 8-Jet Whirlpool
Alcove Dimensions
66”
34”
11"
2”
18” 20” or
or 20” 22”
17"
Junction Box
6"
35½"
9"
*GFI Electrical
Outlet
Drain CL
66"
* Optimum GFI receptacle locations.
may vary
RightActual
Drainlocations
placement
mirrors
=depending
Stud location
on your stud layout.
Drain, Overflow and
16
•Bathtub
• Center Drain only
• Heated Soaker •With or without
• 8-Jet Whirlpool nail flange
Alcove Dimensions
20"
33½"
66”
32”
2”
11"
17” 19” or
or 19” 21”
6"
33"
Drain CL
66"
= Stud location
*Optimum GFI receptacle locations. Actual locations may vary depending on your stud layout.
60" x 60" x 19" SFR Drop In
•Bathtub
• 8-Jet Whirlpool
• Heated Soaker • Front Center Drain
Alcove Dimensions
60”
60”
15⁄8”
32”
173⁄8”
or 193⁄8”
19” or
21”
395⁄8”
= Stud location
*Optimum GFI receptacle locations. Actual locations may vary depending on your stud layout.
17
•Bathtub
• 8-Jet Whirlpool
• Heated Soaker • Left or Right Drain
Alcove Dimensions
60”
42”
15⁄8”
173⁄8” 19” or
or 193⁄8” 21”
= Stud location
60" x 36" x 21" AFR Drop-in
• 8-Jet Whirlpool
•Bathtub
• Heated Soaker • Left or Right Drain
60”
Alcove Dimensions
36”
11"
15⁄8”
Junction Box
6"
37½"
173⁄8” 19” or
or 193⁄8” 21”
1715⁄16"
8¾"
*GFI Electrical
Outlet
Drain CL
60"
* Optimum GFI receptacle Right
locations.Drain
Actual placement
locations may vary
mirrors
= Stud
location
depending
on your studLeft
layout.
Drain measurements.
• 8-Jet Whirlpool
•Bathtub
• Heated Soaker
60”
Alcove Dimensions
32”
15⁄8”
173⁄8” 19” or
or 193⁄8” 21”
= Stud location
Drain, Overflow and
18
Elite™ Seated Showers
(available with optional heated seat)
Seated Base (non-heated)
Heated Seated Base
• Comfortable one piece 18” tall seat
• Easy to step over 3½” threshold
• Slip resistant area for showering
• Spacious 4” deep shelves
•Innovative design hides seams
and eliminates caulk
• Base and wall kit sold separately
• Suitable for tile applications
• Features factory installed heater pads
• Easy access push button on/off button
•Surface heats to 104° within 5 minutes
•Heater automatically shuts off after
30 minutes
•48" x 34" seated base offers heated
seat only
•60" x 32" seated base offers both heated
seat and foot area in front of the seat
19
ide
s
eft
(l
Water-Proof Gasket
(Magnified View)
l)
(ba
ne
pa
ck
Elite™ Wall
pa
ne
l)
No caulk required.
Elite™ Base
Walls overlap base.
Keeps water inside.
(cross section)
60" x 32" Seated Base and Walls
597⁄8”
1” Flange
fiberglass for
maximum stability.
• Perfect for bathtub replacement
57” Door
Width
781⁄8”
Overall
Height
• Left Seat, Right Drain
• Right Seat, Left Drain
Alcove Dimensions
25”
59”
745⁄8”
Door
Height
10”
151⁄8"
6"
6"
155⁄8”
8¾"
33½"
3½”
Threshold
Height
317⁄8”
Floor
cutout
for drain
60"
= Stud location
48" x 34" Seated Base and Walls
477⁄8”
1” Flange
• Left Seat, Center Drain
• Right Seat, Center Drain
45” Door
Width
27”
53”
12”
685⁄8”
Door
Height
155⁄8”
337⁄8”
Drain, Overflow and
721⁄8”
Overall
Height
3½”
Threshold
Height
Alcove Dimensions
16"
6"
35½"
6"
Drain CL
Floor
Cutout
(6"x 6")
24"
48"
= Stud location
20
Elite™ Showers Series
21
No Caulk. Easy to Clean. Spacious.
• Base and wall kit sold separately
•Complete your shower with a Lyons Glass Bypass Door
Elite™ Shower Walls
•Spacious 4" deep shelves
t
lef
(
• Convenient 3" foot rest
e
sid
l)
ne
pa
(ba
ck
pa
ne
l)
• Wall kits sold separately
Elite™ Shower Bases
Water-Proof Gasket
(Magnified View)
No caulk required.
•Slip resistant area for showering
•Easy to step over 3 ½” threshold
Elite™ Wall
•Suitable for tile applications
Available Base Sizes
• 60" x 34" x 6 ½" (AFR)
Elite™ Base
• 60" x 34" x 3 ¾"
• 60" x 32" x 3 ½"
• 60" x 30" x 3 ½"
Walls overlap base.
Keeps water inside.
• 54" x 27" x 4"
• 48" x 34" x 3 ½"
• 48" x 40 x 3 ½"
• 42" x 42" x 3 ½"
• 36" x 36" x 3 ½"
• 32" x 32" x 3 ½"
Available Pan Sizes
• 60" x 32" Rectangle
• 42" x 42" Neo-Angle
fiberglass for
maximum stability.
(cross section)
• 38" x 38" Neo- Angle
• 42" x 42" Square
• 36" x 36" Square
Drain, Overflow and
22
60" x 34" x 69" Elite™ Wall
597⁄8”
1” Flange
57”
Door Width
60" x 34" x 6 ½" AFR Elite™ Base
60" x 34" x 3 ¾" SFR Elite™ Base
44”
29”
• Center Drain Only
69”
Door
Height
115⁄8”
Alcove Dimensions
6"
161⁄16"
35½"
6"
6½” or 3¾”
Threshold
Height
337⁄8”
30"
Floor
cutout
for drain
75½” or
72¾”
Overall
Height
60"
= Stud location
597⁄8”
1” Flange
57”
Door Width
60" x 32" x 3 ½" SFR Elite™ Base
72½”
Overall
Height
• Right or Left Drain
44”
29”
Alcove Dimensions
115⁄8”
317⁄8”
= Stud location
23
69”
Door
Height
3½”
Threshold
Height
51”
Door Width
69”
Door
Height
44”
29”
54" x 27" x 4" SFR Elite™ Base
115⁄8”
267⁄8”
537⁄8”
72½”
Overall
Height
• Right or Left Drain
Alcove Dimensions
13" 12"
4”
Threshold
Height
28½"
6"
9"
Drain CL
54"
= Stud location
477⁄8”
1” Flange
45”
Door Width
72½”
Overall
Height
29”
44”
115⁄8”
Alcove Dimensions
69”
Door
Height
6" 157⁄8"
35½"
337⁄8”
3½”
Threshold
Height
6"
24"
Floor
cutout
for drain
48"
= Stud location
Drain, Overflow and
24
357⁄8”
1” Flange
33”
29”
Door Width
44”
72½”
Overall
Height
Alcove Dimensions
29”
6" 171⁄8"
37½"
69”
Door
Height
115⁄8”
6"
18"
Floor
cutout
for drain
357⁄8”
36"
3½”
Threshold
Height
= Stud location
317⁄8”
1” Flange
29”
Door Width
44”
72½”
Overall
Height
Alcove Dimensions
29”
6" 151⁄8"
33½"
69”
Door
Height
115⁄8”
6"
16"
Floor
cutout
for drain
32"
317⁄8”
3½”
Threshold
Height
= Stud location
25
60" x 30" x 3 1/2" SFR Elite™ Base
• Great for tile applications
6"
1”
31½"
6"
3½”
297⁄8”
1415⁄16"
30"
Floor
cutout
for drain
597⁄8”
60"
48" x 40" x 3 1/2" SFR Elite™ Base
1”
3-1/2”
39-7/8”
6" 187⁄8"
41½"
6"
24"
47-7/8”
Floor
cutout
for drain
48"
1”
Alcove Dimensions
3-1/2”
41-7/8”
41-7/8”
6" 201⁄8"
43½"
6"
21"
Floor
cutout
for drain
42"
= Stud location
Drain, Overflow and
26
Alcove Dimensions
60" x 32" Pan/Receptor
6"
597⁄8”
16"
33½"
6"
Floor
cutout
for drain
317⁄8”
30"
1”
57⁄8”
60"
= Stud location
42" x 42" Neo-Angle Pan/Receptor
Alcove Dimensions
417⁄8”
417⁄8”
1”
241⁄8”
57⁄8”
= Stud location
241⁄8”
251⁄8”
38" x 38" Neo-Angle Pan/Receptor
Alcove Dimensions
377⁄8”
377⁄8”
1”
201⁄8”
251⁄8”
57⁄8”
201⁄8”
= Stud location
Alcove Dimensions
42" x 42" Square Pan/Receptor
417⁄8”
417⁄8”
1”
57⁄8”
= Stud location
Alcove Dimensions
36" x 36" Square Pan/Receptor
357⁄8”
357⁄8”
1”
57⁄8”
= Stud location
27
Lyons Accessories
Inline Heater – HTR01
Tile Flange Kit – TFK
Built-in thermostat
maintains water
temperature,
available for all
Lyons Whirlpools except the 54” x 27"
Designed for use with Lyons Drop-in
Bathtubs for alcove installations
Chrome Curved Curtain Rod – R500
Water Spillage Control Caps
Includes rod with mounting hardware
designed for use only with SeaWave V™
Whirlpool/Bathtub
Shower Curtain
Mildew resistant
caps designed for
the water spillage
control strips
EX1613 Radius Cap
EX1615 Square Cap
Water Spillage
Control Strips
This nylon shower
curtain is machine
washable, with
reinforced eyelets
and magnetic
weights to hold
in place while
showering
Mildew resistant,
collapsible strip easily
installs to any shower base,
designed for bases without thresholds
CWR42 fits 36" showers
Cur130 designed for 36" x 72" showers
Scratch Removal Kit for Acrylic
Surfaces - SRKIT
Includes sandpaper, buffing
compound and cloth
Drain, Overflow and
28
Frameless Glass Doors
29
Frameless glass doors for bathtubs
and showers
Frameless glass doors for Contour
bathtubs only
•¼” tempered clear safety glass
•¼” tempered safety glass follows
contour of bathtub
•Special coated glass is easy to
clean and resists hard water stains
•Slides easily on durable rollers
inside silver header
•Handles can be used as towel bars
•Adjustable door jamb for out of
square walls
Available bathtub doors sizes:
•55”-59” wide by 58” high (Silver Only)
Available shower doors sizes:
•Reversible installation for right
or left opening
•One stationary panel and one
bypass panel with handle
•Bypass panel slides easily on
durable rollers
•Magnetic channel for water
tight seal
•Adjustable door jamb for out
of square walls
•Available in all three finish color
options (Silver, Brushed Nickel
& Oil Rubbed Bronze)
•56”-60” wide by 72” high
Finish Color Options:
Silver
Contour
Shower Doors
Bathtub Doors
Drain, Overflow and
Brushed Nickel
Contour
Shower Doors
Oil Rubbed Bronze
Contour
30
White
Almond
Biscuit
Color Options
Silver Metallic
Black
01 White 02 Almond 09Biscuit
22 Black 64 Silver Metallic
Please visit us at lyonsindustries.com to view our full line of products.
Bathtubs and Shower Bases are ANSI and CSA approved.
Whirlpools and Heated Soaking Bathtubs are ASME and CSA approved.
Lyons products meet flame/smoke codes for high-rise installation.
Availability and product offering subject to change without notice.
LYONS INDUSTRIES, INC.
30000 M-62 West
Dowagiac, MI 49047
phone: (800) 458-9036
fax: (269) 782-5159
www.lyonsindustries.com
e-mail: [email protected]
All product subject to manufacturing tolerance of [+] or [-] 1/8".
All products covered with a protective film to
maintain finish during installation.
Colors shown in this brochure may vary slightly from the
actual product due to variations in the printing process.
4200-00021-4 09/15
Proudly

Bath Brochure - Lyons Industries

Transcription

Similar documents

kinnie brook drain map

Idlehour Lion`s Share

Epic Winterizing Procedure

F.5.4ii MY Hemovac Drain Care_August 24_2012

ipso hf234 washer - Laundry Equipment, Commercial Washing

kitchen drain unblocker kitchen drain unblocker

Oil Change

DWV335_Datasheet copy

Kwik Trip Gas Station Expansion

Sectional Domeless Tub Shower One Piece Domeless Tub