Special Tool Configurations

Transcription

Special Tool Configurations
Special Tool Configurations
Special Overall and/or Flute Lengths
While we recommend using a standard overall and flute
length whenever possible, there are situations where the
use of special overall and/or flute lengths are warranted.
If you have any questions on the relative merits of using
special lengths, CJT’s application specialists will be glad
to be of assistance.
Special Point Geometries
With many applications, special point geometries can
increase tool life and/or performance. Any type of point
that can be put on a high speed drill can be put on a solid
carbide drill and most on a carbide tipped drill with some
exceptions.
Some of the special point geometries we offer:
Ball nose and radial lip point grinds
Double angle points
Flat points (180 degrees)
Split points
“K” notch points
Zero and negative rake cutting edges
Polyrake point
Spur and Brad points
30
© 2005 CJT Koolcarb. Inc.
All rights reserved.
Phone: 630-690-5933
Double Margin Drills
Both solid carbide and carbide tipped drills can be made with
“double margin” construction for applications requiring
added stability and straightness while drilling.
Multiple Diameter Step Tools
Drills, reamers and end mills can all be produced as step tools.
Solid carbide and carbide tipped construction is available in
non-coolant fed and with internal coolant holes.
Special Coatings
TiAlCN and Wc/C are two examples of the special coatings
available. Our application specialist will help you determine
which coating is appropriate for your application.
Ask our Application Specialist
The above are some examples of special purpose drill
configurations we make. For more information on what we can
produce or what we would recommend in special situations
please contact CJT’s application specialists.
Aerospace Specials
Refer to page 45 for more information.
800-323-2299
Fax: 630-690-6355
DURAPOINT ®
Carbide Tip Non-Coolant Fed Drills
GENERAL PURPOSE & AEROSPACE
Style 110
Style 115
Style 120
General purpose, screw machine length.
For cast aluminum, bronze, cast and ductile
irons, fiberglass, hard plastics and other
abrasive materials.
Page. 32
General purpose, 135°split point, screw
machine length. For cast aluminum, bronze,
cast and ductile irons, titaniums, fiberglass,
hard plastics and non-ferrous
Page. 34
metals.
General purpose, jobber length. For cast
aluminum, bronze, cast and ductile irons,
fiberglass, hard plastics, other non-ferrous
materials. Not recommended for
Page. 36
soft steels.
General purpose, 135° split point, jobber
For cast aluminum, bronze, cast and
Style 125 length.
ductile irons, titaniums, fiberglass, hard
plastics and non-ferrous metals.
Page. 40
Style 130
General purpose, taper length, tanged. For
cast aluminum, bronze, cast and ductile
irons, fiberglass, hard plastics and
non-ferrous materials.
Page. 42
Style 140
General purpose, Morse taper shank. For
cast aluminum, bronze, cast and ductile
irons, fiberglass, hard plastics and
non-ferrous materials.
Page. 44
Style 129
Aerospace, 135° NAS907 (P3) split
point, aircraft (12”) extension length. For
cast aluminum, bronze, cast and ductile
irons, titaniums, graphite, fiberglass, hard
plastics and non-ferrous metals. Page. 46
HEAVY DUTY
Hard steel, die drill. Extra thick carbide tip,
Style 150 high temperature braze. For hardened and
case hardened steels.
Page. 48
SPECIAL PURPOSE
Precision glass and tile drill. Carbide tip
Style 162 offers excellent abrasion resistance when
drilling glass, tile, mirrors and
ceramics.
Style 163
www.cjtkoolcarb.com
Page. 50
Bowling Ball drill, Silver & Deming style.
Brazed carbide tip on high helix masonry
flute is ideal for the economic drilling
of carbon, hard plastics, concrete, plaster,
wall board, stone, brick and
asphalt.
Page. 51
e-mail: [email protected]
© 2005 CJT Koolcarb. Inc.
All rights reserved.
31
Carbide Tip, 118° Point, Screw Machine Length Drill
Premium carbide grade provides excellent wear resistance when cutting
cast aluminum, bronze, cast and ductile irons, fiberglass, hard plastics
and other abrasive materials. Not recommended for soft steels.
Style 110
•
•
Right hand spiral, right hand cut, heavy duty high speed steel body.
•
•
118° cam relieved point, strong edge, free cutting.
2 to 2.5 times faster speed of standard high speed steel yields faster
holes with better hole finish.
Allow 2.5 x Ø of flute for chip exit up to 1/4” (6.35mm),
2 x Ø up to 7/16” (11.1mm) and 1.5 x Ø over 7/16”.
Diameter Tolerances
Nominal Size
Through
.2501”
6.36mm
.5001”
12.7mm
To
.2500”
6.35mm
.5000”
12.7mm
And Up
Cutting Ø
"D"
EDP #
11001250
11001378
11001406
11001562
11001575
11001719
11001772
11001875
11001969
11002010
11002031
11002130
11002165
11002188
11002280
11002344
11002362
11002460
11002500
11002559
11002570
11002610
11002656
11002660
11002720
11002756
11002812
11002953
11002969
11003125
11003150
11003160
32
Cutting ø
mm
Inch
+.0000 +0.000
-0.025
-.0010
+.0000 +0.000
-0.025
-.0010
+.0000 +0.000
-0.025
-.0010
Inch/
Wire
1/8
9/64
5/32
11/64
3/16
7
13/64
3
7/32
1
15/64
D
1/4
F
G
17/64
H
I
9/32
19/64
5/16
© 2005 CJT Koolcarb. Inc.
All rights reserved.
O
mm
3.175
3.5
3.572
3.967
4.
4.366
4.5
4.763
5.
5.105
5.159
5.41
5.5
5.558
5.791
5.954
6.
6.248
6.35
6.5
6.528
6.629
6.746
6.756
6.909
7.
7.142
7.5
7.541
7.938
8.
8.026
* Shk Ø = cut Ø thru 1”.
Ø’s over 1” shank is 1”
in Ø and 2.25” in length.
Shank ø
mm
Inch
+.0000 +0.000
-.0030
-0.076
+.0000 +0.000
-.0045
-0.114
+.0000 +0.000
-.0030
-0.076
Dec.
Equiv.
Inch
.1250
.1378
.1406
.1562
.1575
.1719
.1772
.1875
.1969
.2010
.2031
.2130
.2165
.2188
.2280
.2344
.2362
.2460
.2500
.2559
.2570
.2610
.2656
.2660
.2720
.2756
.2812
.2953
.2969
.3125
.3150
.3160
118°
ØD
F
B
A
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
1-7/8
mm
48.
Inch
7/8
mm
22.
Inch
.52
mm
13.
Inch
.0981 - .1290
mm
2.492 - 3.277
2-1/16
52.
1
25.
.61
15.
.1291 - .1590
3.279 - 4.039
2-3/16
56.
1-1/8
29.
.70
18.
.1591 - .1910
4.041 - 4.851
2-3/8
60.
1-1/4
32.
.72
18.
.1911 - .2210
4.854 - 5.613
2-1/2
64.
1-3/8
35.
.83
21.
.2211 - .2530
5.616 - 6.426
2-11/16
68.
1-1/2
38.
.88
22.
.2531 - .2840
6.429 - 7.214
2-13/16
71.
1-5/8
41.
1.0
25.
.2841 - .3160
7.216 - 8.026
Phone: 630-690-5933
800-323-2299
Fax: 630-690-6355
Carbide Tip, 118° Point, Screw Machine Length Drill
Style 110
EDP #
11003281
11003320
11003346
11003390
11003438
11003543
11003594
11003680
11003740
11003750
11003860
11003906
11003937
11003970
11004062
11004134
11004219
11004331
11004375
11004528
11004531
11004688
11004724
11004844
11004921
11005000
11005118
11005312
11005315
11005512
11005625
11005938
11006250
11006562
11006875
11007188
11007500
11007812
11008125
11008438
11008750
11009062
11009375
11009688
11010000
11010625
11011250
11011875
11012500
Cutting Ø
"D"
Inch/
Wire
21/64
Q
R
11/32
23/64
U
3/8
W
25/64
X
13/32
27/64
7/16
29/64
15/32
31/64
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1*
1-1/16*
1-1/8*
1-3/16*
1-1/4*
mm
8.334
8.433
8.5
8.611
8.733
9.
9.129
9.347
9.5
9.525
9.804
9.921
10.
10.084
10.317
10.5
10.716
11.
11.113
11.5
11.509
11.908
12.
12.304
12.5
12.7
13.
13.492
13.5
14.
14.288
15.083
15.875
16.667
17.463
18.258
19.05
19.842
20.638
21.433
22.225
23.017
23.813
24.608
25.4
26.988
28.575
30.163
31.75
Dec.
Equiv.
Inch
.3281
.3320
.3346
.3390
.3438
.3543
.3594
.3680
.3740
.3750
.3860
.3906
.3937
.3970
.4062
.4134
.4219
.4331
.4375
.4528
.4531
.4688
.4724
.4844
.4921
.5000
.5118
.5312
.5315
.5512
.5625
.5938
.6250
.6562
.6875
.7188
.7500
.7812
.8125
.8438
.8750
.9062
.9375
.9688
1.0000
1.0625
1.1250
1.1875
1.2500
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
mm
Inch
mm
Inch
mm
Inch
mm
3
76.
1-11/16
43.
1.0
25.
.3161 - .3470
8.029 - 8.814
3-1/8
79.
1-13/16
46.
1.0
27.
.3471 - .3780
8.816 - 9.601
3-5/16
84.
1-15/16
49.
1.1
28.
.3781 - .4100
9.604 - 10.414
3-7/16
87.
2-1/16
52.
1.2
30.
.4101 - .4410
10.417 - 11.201
3-5/8
92.
2-1/8
54.
1.2
30.
.4411 - .4730
11.204 - 12.014
3 3/4
95.
2-1/4
57.
1.3
33.
.4731 - .5040
12.017 - 12.802
3-7/8
98.
2-3/8
60.
1.4
36.
.5041 - .5340
12.804 - 13.564
4
102.
2-1/2
64.
1.5
39.
.5341 - .5650
13.566 - 14.351
4-1/8
4-1/4
4-1/2
4-5/8
4-3/4
5
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/4
6-3/8
6-5/8
6-3/4
105.
108.
114.
117.
121.
127.
130.
133.
137.
140.
143.
146.
149.
152.
159.
162.
168.
171.
2-5/8
2-3/4
67.
70.
1.6
1.7
41.
44.
2-7/8
73.
1.8
46.
3
3-1/8
3-1/4
3-3/8
76.
79.
83.
86.
1.9
48.
2
51.
2.2
55.
3-1/2
89.
2.3
58.
3-5/8
3-3/4
3-7/8
92.
95.
98.
2.4
2.5
2.6
2.7
61.
63.
66.
68.
4
102.
2.6
66.
4-1/4
4-3/8
108.
111.
2.7
2.9
69.
73.
.5651 - .5960
.5961 - .6280
.6281 - .6590
.6591 - .6900
.6901 - .7210
.7211 - .7530
.7531 - .7840
.7841 - .8150
.8151 - .8460
.8461 - .8780
.8781 - .9090
.9091 - .9400
.9401 - .9710
.9711 - 1.0030
1.0310 - 1.0650
1.0930 - 1.1280
1.1560 - 1.1900
1.2180 - 1.2530
14.354 - 15.138
15.141 - 15.951
15.954 - 16.739
16.741 - 17.526
17.529 - 18.313
18.316 - 19.126
19.129 - 19.914
19.916 - 20.701
20.704 - 21.488
21.491 - 22.301
22.304 - 23.089
23.091 - 23.876
23.879 - 24.663
24.666 - 25.476
26.187 - 27.051
27.762 - 28.651
29.362 - 30.266
30.937 - 31.826
* Shk Ø = cut Ø thru 1”.
Ø’s over 1” shank is 1”
in Ø and 2.25” in length
www.cjtkoolcarb.com
e-mail: [email protected]
© 2005 CJT Koolcarb. Inc.
All rights reserved.
33
Carbide Tip, 135° Split Point, Screw Machine Length Drill
Premium carbide grade provides excellent wear resistance when cutting
cast aluminum, bronze, cast and ductile irons, titaniums, fiberglass, hard
plastics and non-ferrous metals. Not recommended for soft steels.
Style 115
•
135° four facet split point improves true position and is an
excellent starting drill for longer coolant fed drills.
•
2 to 2.5 times faster speed than standard high speed steel with
better hole finish.
•
•
Right hand spiral, right hand cut, heavy duty high speed steel body.
Allow 2.5 x Ø of flute for chip exit up to 1/4” (6.35mm),
2 x Ø up to 7/16” (11.1mm) and 1.5 x Ø over 7/16”.
Diameter Tolerances
Nominal Size
Through
.2501”
6.36mm
.5001”
12.7mm
To
.2500”
6.35mm
.5000”
12.7mm
And Up
Cutting Ø
"D"
EDP #
11501250
11501378
11501406
11501562
11501575
11501719
11501772
11501875
11501969
11502010
11502031
11502130
11502165
11502188
11502344
11502362
11502460
11502500
11502559
11502570
11502610
11502656
11502720
11502756
11502812
11502953
11502969
11503125
11503150
11503160
11503281
11503320
34
Cutting ø
mm
Inch
+.0000 +0.000
-0.025
-.0010
+.0000 +0.000
-0.025
-.0010
+.0000 +0.000
-0.025
-.0010
Inch/
Wire
1/8
9/64
5/32
11/64
3/16
7
13/64
3
7/32
15/64
D
1/4
F
G
17/64
I
9/32
19/64
5/16
O
21/64
Q
© 2005 CJT Koolcarb. Inc.
All rights reserved.
mm
3.175
3.5
3.571
3.967
4.
4.366
4.5
4.763
5.
5.105
5.159
5.41
5.5
5.558
5.954
6.
6.248
6.35
6.5
6.528
6.629
6.746
6.909
7.
7.142
7.5
7.541
7.938
8.
8.026
8.334
8.433
* Shk Ø = cut Ø thru 1”.
Ø’s over 1” shank is 1”
in Ø and 2.25” in length.
Shank ø
mm
Inch
+.0000 +0.000
-.0030
-0.076
+.0000 +0.000
-.0045
-0.114
+.0000 +0.000
-.0030
-0.076
Dec.
Equiv.
Inch
.1250
.1378
.1406
.1562
.1575
.1719
.1772
.1875
.1969
.2010
.2031
.2130
.2165
.2188
.2344
.2362
.2460
.2500
.2559
.2570
.2610
.2656
.2720
.2756
.2812
.2953
.2969
.3125
.3150
.3160
.3281
.3320
135°
F
ØD
B
A
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
1-7/8
mm
48.
Inch
7/8
mm
22.
Inch
.52
mm
13.
Inch
.0981 - .1290
mm
2.492 - 3.277
2-1/16
52.
1
25.
.61
15.
.1291 - .1590
3.279 - 4.039
2-3/16
56.
1-1/8
29.
.70
18.
.1591 - .1910
4.041 - 4.851
2-3/8
60.
1-1/4
32.
.72
18.
.1911 - .2210
4.854 - 5.613
2-1/2
64.
1-3/8
35.
.83
21.
.2211 - .2530
5.616 - 6.426
2-11/16
68.
1-1/2
38.
.88
22.
.2531 - .2840
6.429 - 7.214
2-13/16
71.
1-5/8
41.
1.0
25.
.2841 - .3160
7.216 - 8.026
3
76.
1-11/16
43.
1.0
25.
.3161 - .3470
8.029 - 8.814
Phone: 630-690-5933
800-323-2299
Fax: 630-690-6355
Carbide Tip, 135° Split Point, Screw Machine Length Drill
Style 115
EDP #
Cutting Ø
"D"
Inch/
Wire
11503346
11503390
11503438
11503543
11503594
11503680
11503740
11503750
11503860
11503906
11503937
11504062
11504134
11504219
11504331
11504375
11504528
11504531
11504688
11504724
11504844
11504921
11505000
11505118
11505312
11505315
11505512
11505625
11505938
11506250
11506562
11506875
11507188
11507500
11507812
11508125
11508438
11508750
11509062
11509375
11509688
11510000
11510625
11511250
11511875
11512500
R
11/32
23/64
U
3/8
W
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1*
1-1/16*
1-1/8*
1-3/16*
1-1/4*
mm
8.5
8.611
8.733
9.
9.129
9.347
9.5
9.525
9.804
9.921
10.
10.317
10.5
10.716
11.
11.113
11.5
11.509
11.908
12.
12.303
12.5
12.7
13.
13.492
13.5
14.
14.288
15.083
15.875
16.667
17.463
18.256
19.05
19.842
20.638
21.433
22.225
23.017
23.813
24.608
25.4
26.988
28.575
30.163
31.75
Dec.
Equiv.
Inch
.3346
.3390
.3438
.3543
.3594
.3680
.3740
.3750
.3860
.3906
.3937
.4062
.4134
.4219
.4331
.4375
.4528
.4531
.4688
.4724
.4844
.4921
.5000
.5118
.5312
.5315
.5512
.5625
.5938
.6250
.6562
.6875
.7188
.7500
.7812
.8125
.8438
.8750
.9062
.9375
.9688
1.0000
1.0625
1.1250
1.1875
1.2500
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
mm
Inch
mm
Inch
mm
Inch
mm
3
76.
1-11/16
43.
1.0
25.
.3161 - .3470
8.029 - 8.814
3-1/8
79.
1-13/16
46.
1.0
27.
.3471 - .3780
8.816 - 9.601
3-5/16
84.
1-15/16
49.
1.1
28.
.3781 - .4100
9.604 - 10.414
3-7/16
87.
2-1/16
52.
1.2
30.
.4101 - .4410
10.417 - 11.201
3-5/8
92.
2-1/8
54.
1.2
30.
.4411 - .4730
11.204 - 12.014
3-3/4
95.
2-1/4
57.
1.3
33.
.4731 - .5040
12.017 - 12.802
3-7/8
98.
2-3/8
60.
1.4
36.
.5041 - .5340
12.804 - 13.564
4
102.
2-1/2
64.
1.5
38.
.5341 - .5650
13.566 - 14.351
4-1/8
4-1/4
4-1/2
4-5/8
4-3/4
5
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/4
6-3/8
6-5/8
6-3/4
105.
108.
114.
117.
121.
127.
130.
133.
137.
140.
143.
146.
149.
152.
159.
162.
168.
171.
2-5/8
2-3/4
67.
70.
1.6
1.7
41.
43.
2-7/8
73.
1.8
46.
3
3-1/8
3-1/4
3-3/8
76.
79.
83.
86.
1.9
48.
2.0
51.
2.2
56.
3-1/2
89.
2.3
58.
3-5/8
3-3/4
3-7/8
92.
95.
98.
2.4
2.5
2.6
2.7
61.
64.
66.
69.
4
102.
2.6
66.
4-1/4
4-3/8
108.
111.
2.7
2.9
69.
74.
.5651 - .5960
.5961 - .6280
.6281 - .6590
.6591 - .6900
.6901 - .7210
.7211 - .7530
.7531 - 7840
.7841 - .8150
.8151 - .8460
.8461 - .8780
.8781 - .9090
.9091 - .9400
.9401 - .9710
.9711 - 1.0030
1.0310 - 1.0650
1.0930 - 1.1280
1.1560 - 1.1900
1.2180 - 1.2530
14.354 - 15.138
15.141 - 15.951
15.954 - 16.739
16.741 - 17.526
17.529 - 18.313
18.316 - 19.126
19.129 - 19.914
19.916 - 20.702
20.704 - 21.488
21.491 - 22.301
22.304 - 23.089
23.091 - 23.876
23.879 - 24.663
24.666 - 25.476
26.187 - 27.051
27.762 - 28.651
29.362 - 30.226
30.937 - 31.826
* Shk Ø = cut Ø thru 1”.
Ø’s over 1”, shank is 1”
in Ø and 2.25” in length
www.cjtkoolcarb.com
e-mail: [email protected]
© 2005 CJT Koolcarb. Inc.
All rights reserved.
35
Carbide Tip, 118° Point, Jobber Length Drill
Premium carbide grade provides excellent wear resistance when cutting
cast aluminum, bronze, cast and ductile irons, fiberglass, hard plastics,
other non-ferrous materials. Not recommended for soft steels.
Style 120
•
Right hand spiral, right hand cut, heavy
duty high speed steel body.
•
Tang (automotive) drive available with
quick delivery.
•
2 to 2.5 times faster speed of standard
high speed steel yields faster holes
with better hole finish.
•
For intermediate decimal sizes see grind
down range column.
•
118° cam relieved point, strong edge,
free cutting.
•
Allow 2.5 x Ø of flute for chip exit up to
1/4” (6.35mm), 2 x Ø up to 7/16”
(11.1mm) and 5 x Ø over 7/16”.
Diameter Tolerances
Nominal Size
Through
.2501”
6.36mm
.5001”
12.7mm
To
.2500”
6.35mm
.5000”
12.7mm
And Up
Cutting Ø
"D"
EDP #
12000980
12000995
12001015
12001040
12001065
12001094
12001100
12001110
12001130
12001160
12001181
12001200
12001220
12001250
12001260
12001285
12001299
12001339
12001360
12001378
12001405
12001406
12001417
12001440
12001457
12001470
12001495
12001496
12001520
12001535
12001540
12001562
12001570
12001575
12001590
Cutting ø
mm
+0.000
-0.018
+0.000
-0.025
+0.000
-0.025
Inch
+.0000
-.0007
+.0000
-.0010
+.0000
-.0010
Inch/
Wire
40
39
38
37
36
7/64
35
34
33
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
mm
2.489
2.527
2.578
2.642
2.705
2.778
2.794
2.819
2.87
2.946
3.
3.048
3.1
3.175
3.2
3.264
3.3
3.4
3.454
3.5
3.569
3.571
3.6
3.658
3.7
3.734
3.797
3.8
3.861
3.9
3.912
3.967
3.988
4.
4.039
Shank ø
mm
Inch
+.0000 +0.000
-.0030
-0.076
+.0000 +0.000
-.0045
-0.114
+.0000 +0.000
-.0030
-0.076
Dec.
Equiv.
Inch
.0980
.0995
.1015
.1040
.1065
.1094
.1100
.1110
.1130
.1160
.1181
.1200
.1220
.1250
.1260
.1285
.1299
.1339
.1360
.1378
.1405
.1406
.1417
.1440
.1457
.1470
.1495
.1496
.1520
.1535
.1540
.1562
.1570
.1575
.1590
118°
Shk Ø = Cut Ø
F
ØD
B
A
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Inch
mm
Inch
mm
Inch
mm
Inch
mm
2-3/4
70.
1-5/8
41.
1.3
32.
.0980 - .1290
2.489 - 3.277
3-1/8
79.
2
51.
1.6
41.
.1291 - .1590
3.279 - 4.039
Shk Ø = Cut Ø
36
© 2005 CJT Koolcarb. Inc.
All rights reserved.
Grind Down Range
Phone: 630-690-5933
800-323-2299
Fax: 630-690-6355
Carbide Tip, 118° Point, Jobber Length Drill
Style 120
EDP #
12001610
12001614
12001654
12001660
12001693
12001695
12001719
12001730
12001732
12001770
12001772
12001800
12001811
12001820
12001850
12001875
12001890
12001910
12001929
12001935
12001960
12001969
12001990
12002008
12002010
12002031
12002040
12002047
12002055
12002087
12002090
12002126
12002130
12002165
12002188
12002205
12002210
12002244
12002280
12002283
12002323
12002340
12002344
12002362
12002380
12002402
12002420
12002441
12002460
12002480
12002500
12002520
12002559
12002570
12002598
12002610
Cutting Ø
"D"
Inch/
Wire
20
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
7/32
2
1
A
15/64
B
C
D
1/4
F
G
mm
4.089
4.1
4.2
4.216
4.3
4.305
4.366
4.394
4.4
4.496
4.5
4.572
4.6
4.623
4.7
4.763
4.801
4.851
4.9
4.915
4.978
5.
5.055
5.1
5.105
5.159
5.182
5.2
5.22
5.3
5.309
5.4
5.41
5.5
5.558
5.6
5.613
5.7
5.791
5.8
5.9
5.944
5.954
6.
6.045
6.1
6.147
6.2
6.248
6.3
6.35
6.4
6.5
6.528
6.6
6.629
Dec.
Equiv.
Inch
.1610
.1614
.1654
.1660
.1693
.1695
.1719
.1730
.1732
.1770
.1772
.1800
.1811
.1820
.1850
.1875
.1890
.1910
.1929
.1935
.1960
.1969
.1990
.2008
.2010
.2031
.2040
.2047
.2055
.2087
.2090
.2126
.2130
.2165
.2188
.2205
.2210
.2244
.2280
.2283
.2323
.2340
.2344
.2362
.2380
.2402
.2420
.2441
.2460
.2480
.2500
.2520
.2559
.2570
.2598
.2610
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
mm
Inch
mm
Inch
mm
Inch
mm
3-1/2
89.
2-5/16
59.
1.9
48.
.1591 - .1910
4.041 - 4.851
3-3/4
95.
2-1/2
64.
2
50.
.1911 - .2210
4.854 - 5.613
4
102.
2-3/4
70.
2.2
56.
.2211 - .2530
5.616 - 6.426
4-1/4
108.
2-15/16
75.
2.3
59.
.2531 - .2840
6.429 - 7.214
Shk Ø = Cut Ø
www.cjtkoolcarb.com
e-mail: [email protected]
© 2005 CJT Koolcarb. Inc.
All rights reserved.
37
Carbide Tip, 118° Point, Jobber Length Drill
Style 120
Cutting Ø
"D"
EDP #
Inch/
Wire
12002638
12002656
12002660
12002677
12002717
12002720
12002756
12002770
12002795
12002810
12002812
12002835
12002874
12002900
12002913
12002950
12002953
12002969
12002992
12003020
12003031
12003071
12003110
12003125
12003150
12003160
12003189
12003228
12003230
12003268
12003281
12003307
12003320
12003346
12003386
12003390
12003425
12003438
12003465
12003480
12003504
12003543
12003580
12003583
12003594
12003622
12003661
12003680
12003701
12003740
12003750
12003770
12003780
12003819
12003858
17/64
H
I
J
K
9/32
L
M
19/64
N
5/16
O
P
21/64
Q
R
11/32
S
T
23/64
U
3/8
V
mm
6.7
6.746
6.756
6.8
6.9
6.909
7.
7.036
7.1
7.137
7.142
7.2
7.3
7.366
7.4
7.493
7.5
7.541
7.6
7.671
7.7
7.8
7.9
7.938
8.
8.026
8.1
8.2
8.204
8.3
8.334
8.4
8.433
8.5
8.6
8.611
8.7
8.733
8.8
8.839
8.9
9.
9.093
9.1
9.129
9.2
9.3
9.347
9.4
9.5
9.525
9.576
9.6
9.7
9.8
Dec.
Equiv.
Inch
.2638
.2656
.2660
.2677
.2717
.2720
.2756
.2770
.2795
.2810
.2812
.2835
.2874
.2900
.2913
.2950
.2953
.2969
.2992
.3020
.3031
.3071
.3110
.3125
.3150
.3160
.3189
.3228
.3230
.3268
.3281
.3307
.3320
.3346
.3386
.3390
.3425
.3438
.3465
.3480
.3504
.3543
.3580
.3583
.3594
.3622
.3661
.3680
.3701
.3740
.3750
.3770
.3780
.3819
.3858
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Inch
mm
Inch
mm
Inch
mm
Inch
mm
4-1/4
108.
2-15/16
75.
2.3
59.
.2531 - .2840
6.429 - 7.214
4-1/2
114.
3-3/16
81.
2.6
65.
.2841 - .3160
7.216 - 8.026
4-3/4
121.
3-7/16
87.
2.7
69.
.3161 - .3470
8.029 - 8.814
5
127.
3-5/8
92.
2.9
73.
.3471 - .3780
8.816 - 9.601
5-1/4
133.
3-7/8
98.
3.1
78.
.3781 - .4100
9.604 - 10.414
Shk Ø = Cut Ø
38
© 2005 CJT Koolcarb. Inc.
All rights reserved.
Grind Down Range
Phone: 630-690-5933
800-323-2299
Fax: 630-690-6355
Carbide Tip, 118° Point, Jobber Length Drill
Style 120
EDP #
12003860
12003898
12003906
12003937
12003970
12003976
12004016
12004040
12004055
12004062
12004094
12004130
12004134
12004173
12004213
12004219
12004252
12004291
12004331
12004370
12004375
12004409
12004449
12004488
12004528
12004531
12004567
12004606
12004646
12004685
12004688
12004724
12004764
12004803
12004843
12004844
12004882
12004921
12004961
12005000
12005039
12005079
12005118
12005156
12005312
12005469
12005625
12005781
12005938
12006094
12006250
12006406
12006562
12006719
12006875
Cutting Ø
"D"
Inch/
Wire
W
25/64
X
Y
13/32
Z
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
mm
9.804
9.9
9.921
10.
10.084
10.1
10.2
10.262
10.3
10.317
10.4
10.49
10.5
10.6
10.7
10.716
10.8
10.9
11.
11.1
11.113
11.2
11.3
11.4
11.5
11.509
11.6
11.7
11.8
11.9
11.908
12.
12.1
12.2
12.3
12.304
12.4
12.5
12.6
12.7
12.8
12.9
13.
13.096
13.492
13.891
14.288
14.684
15.083
15.479
15.875
16.271
16.667
17.066
17.463
Dec.
Equiv.
Inch
.3860
.3898
.3906
.3937
.3970
.3976
.4016
.4040
.4055
.4062
.4094
.4130
.4134
.4173
.4213
.4219
.4252
.4291
.4331
.4370
.4375
.4409
.4449
.4488
.4528
.4531
.4567
.4606
.4646
.4685
.4688
.4724
.4764
.4803
.4843
.4844
.4882
.4921
.4961
.5000
.5039
.5079
.5118
.5156
.5312
.5469
.5625
.5781
.5938
.6094
.6250
.6406
.6562
.6719
.6875
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
mm
Inch
mm
Inch
mm
Inch
mm
5-1/4
133.
3-7/8
98.
3.1
78.
.3781 - .4100
9.604 - 10.414
5-1/2
140.
4-1/16
103.
3.2
81.
.4101 - .4410
10.417 - 11.201
5-3/4
146.
4-5/16
110.
3.4
86.
.4411 - .4730
11.204 - 12.014
6
152.
4-1/2
114.
3.5
90.
.4731 - .5040
12.017 - 12.802
.5041 - .5340
12.804 - 13.564
6-5/8
168.
4-13/16
122.
3.9
98.
.5341 - .5650
13.566 - 14.351
.5781 only
.5651 - .5960
14.684
14.354 - 15.138
.5961 - .6280
15.141 - 15.951
6-5/8
168.
5-3/16
132.
7-1/8
181.
5-3/16
132.
7-5/8
194.
5-5/8
143.
3.8
97.
4.2
107.
4.1
104.
.6281 - .6590
15.954 - 16.739
4.5
114.
.6591 - .6900
16.741 - 17.526
Shk Ø = Cut Ø
www.cjtkoolcarb.com
e-mail: [email protected]
© 2005 CJT Koolcarb. Inc.
All rights reserved.
39
Carbide Tip, 135° Split Point, Jobber Length Drill
Premium carbide grade provides excellent wear resistance when cutting
cast aluminum, bronze, cast and ductile irons, titaniums, fiberglass, hard
plastics and non-ferrous metals. Not recommended for soft steels.
Style 125
•
135° four facet split point improves true position on CNC
applications.
•
2 to 2.5 times faster speed than standard high speed steel with
better hole finish.
•
•
•
Tang (automotive) drive available with quick delivery.
Right hand spiral, right hand cut, heavy duty high speed steel bodies.
Allow 2.5 x Ø of flute for chip exit up to 1/4” (6.35mm),
2 x Ø up to 7/16” (11.1mm) and 1.5 x Ø over 7/16”.
Diameter Tolerances
Nominal Size
Through
.2501”
6.36mm
.5001”
12.7mm
To
.2500”
6.35mm
.5000”
12.7mm
And Up
Cutting Ø
"D"
EDP #
12501160
12501200
12501250
12501285
12501360
12501405
12501406
12501440
12501470
12501495
12501520
12501540
12501562
12501570
12501590
12501610
12501660
12501695
12501719
12501730
12501770
12501800
12501820
12501850
12501875
12501890
12501910
12501935
12501960
12501990
12502010
12502031
12502040
12502055
12502090
12502130
Cutting ø
mm
+0.000
-0.018
+0.000
-0.025
+0.000
-0.025
Inch
+.0000
-.0007
+.0000
-.0010
+.0000
-.0010
Inch/
Wire
32
31
1/8
30
29
28
9/64
27
26
25
24
23
5/32
22
21
20
19
18
11/64
17
16
15
14
13
3/16
12
11
10
9
8
7
13/64
6
5
4
3
mm
2.946
3.048
3.175
3.264
3.454
3.569
3.571
3.658
3.734
3.797
3.861
3.912
3.967
3.988
4.039
4.089
4.216
4.305
4.366
4.394
4.496
4.572
4.623
4.7
4.763
4.801
4.851
4.915
4.978
5.055
5.105
5.159
5.182
5.22
5.309
5.41
Shank ø
mm
Inch
+.0000 +0.000
-.0030
-0.076
+.0000 +0.000
-.0045
-0.114
+.0000 +0.000
-.0030
-0.076
Dec.
Equiv.
Inch
.1160
.1200
.1250
.1285
.1360
.1405
.1406
.1440
.1470
.1495
.1520
.1540
.1562
.1570
.1590
.1610
.1660
.1695
.1719
.1730
.1770
.1800
.1820
.1850
.1875
.1890
.1910
.1935
.1960
.1990
.2010
.2031
.2040
.2055
.2090
.2130
135°
Shk Ø = Cut Ø
F
ØD
B
A
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Inch
mm
Inch
mm
Inch
mm
Inch
mm
2-3/4
70.
1-5/8
41.
1.3
33.
.0980 - .1290
2.489 - 3.277
3-1/8
79.
2
51.
1.6
41.
.1291 - .1590
3.279 - 4.039
3-1/2
89.
2-5/16
59.
1.9
48.
.1591 - .1910
4.041 - 4.851
3-3/4
95.
2-1/2
64.
2
51.
.1911 - .2210
4.854 - 5.613
Shk Ø = Cut Ø
40
© 2005 CJT Koolcarb. Inc.
All rights reserved.
Grind Down Range
Phone: 630-690-5933
800-323-2299
Fax: 630-690-6355
Carbide Tip, 135° Split Point, Jobber Length Drill
Style 125
EDP #
12502188
12502210
12502280
12502340
12502344
12502380
12502420
12502460
12502500
12502570
12502610
12502656
12502660
12502720
12502770
12502810
12502812
12502900
12502950
12502969
12503020
12503125
12503160
12503230
12503281
12503320
12503390
12503438
12503480
12503580
12503594
12503680
12503750
12503770
12503860
12503906
12503970
12504040
12504062
12504130
12504219
12504375
12504531
12504688
12504844
12505000
12505156
12505312
12505469
12505625
12505781
12505938
12506094
12506250
12506406
12506562
12506719
12506875
Cutting Ø
"D"
Inch/
Wire
7/32
2
1
A
15/64
B
C
D
1/4
F
G
17/64
H
I
J
K
9/32
L
M
19/64
N
5/16
O
P
21/64
Q
R
11/32
S
T
23/64
U
3/8
V
W
25/64
X
Y
13/32
Z
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
mm
5.558
5.613
5.791
5.944
5.954
6.045
6.147
6.248
6.35
6.528
6.629
6.746
6.756
6.909
7.036
7.137
7.142
7.366
7.493
7.541
7.671
7.938
8.026
8.204
8.334
8.433
8.611
8.733
8.839
9.093
9.129
9.347
9.525
9.576
9.804
9.921
10.084
10.262
10.317
10.49
10.716
11.113
11.509
11.908
12.304
12.7
13.096
13.492
13.891
14.288
14.684
15.083
15.479
15.875
16.271
16.667
17.066
17.463
Dec.
Equiv.
Inch
.2188
.2210
.2280
.2340
.2344
.2380
.2420
.2460
.2500
.2570
.2610
.2656
.2660
.2720
.2770
.2810
.2812
.2900
.2950
.2969
.3020
.3125
.3160
.3230
.3281
.3320
.3390
.3438
.3480
.3580
.3594
.3680
.3750
.3770
.3860
.3906
.3970
.4040
.4062
.4130
.4219
.4375
.4531
.4688
.4844
.5000
.5156
.5312
.5469
.5625
.5781
.5938
.6094
.6250
.6406
.6562
.6719
.6875
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
mm
Inch
mm
Inch
mm
Inch
mm
3-3/4
95.
2-1/2
64.
2
51.
.1911 - .2210
4.854 - 5.613
4
102.
2-3/4
70.
2.2
56.
.2211 - .2530
5.616 - 6.426
4-1/4
108.
2-15/16
75.
2.3
59.
.2531 - .2840
6.429 - 7.214
4-1/2
114.
3-3/16
81.
2.6
66.
.2841 - .3160
7.216 - 8.026
4-3/4
121.
3-7/16
87.
2.7
69.
.3161 - .3470
8.029 - 8.814
5
127.
3-5/8
92.
2.9
74.
.3471 - .3780
8.816 - 9.601
5-1/4
133.
3-7/8
98.
3.1
78.
.3781 - .4100
9.604 - 10.414
5-1/2
140.
4-1/16
103.
3.2
81.
.4101 - .4410
10.417 - 11.201
5-3/4
146.
4-5/16
110.
3.4
86.
.4411 - .4730
11.204 - 12.014
6
152.
4-1/2
114.
3.5
89.
.4731 - .5040
12.017 - 12.802
6-5/8
168.
4-13/16
122.
3.9
99.
.5041 - .5340
12.804 - 13.564
6-5/8
168.
4-13/16
122.
3.9
99.
.5341 - .5650
13.566-14.351
6-5/8
168.
5-3/16
132.
3.8
97.
.5781 only
.5651 - .5960
14.684
14.354 - 15.138
7-1/8
181.
5-3/16
132.
4.2
107.
.5961 - .6280
15.141 - 15.951
7-1/8
181.
5-3/16
132.
4.1
104.
.6281 - .6590
15.954 - 16.739
7-5/8
194.
5-5/8
143.
4.5
114.
.6591 - .6900
16.741 - 17.526
Shk Ø = Cut Ø
www.cjtkoolcarb.com
e-mail: [email protected]
© 2005 CJT Koolcarb. Inc.
All rights reserved.
41
Carbide Tip, General Purpose, Taper Length Tanged Drill
Premium carbide grade provides excellent wear resistance when cutting
cast aluminum, bronze, cast and ductile irons, fiberglass, hard plastics
and non-ferrous materials.
Style 130
•
•
•
118° cam relieved point, strong edge, free cutting.
•
•
Tanged shank provides positive drive.
Right hand spiral, right hand cut, heavy duty high speed steel body.
2 to 2.5 times faster speed of standard high speed steel yields faster
holes with better hole finish.
Allow 2.5 x Ø of flute for chip exit up to 1/4” (6.35mm),
2 x Ø up to 7/16” (11.1mm) and 1.5 x Ø over 7/16”.
Diameter Tolerances
Nominal Size
Through
.2501”
6.36mm
.5001”
12.7mm
To
.2500”
6.35mm
.5000”
12.7mm
And Up
Cutting Ø
"D"
EDP #
13001250
13001406
13001562
13001719
13001875
13001969
13002031
13002165
13002188
13002344
13002362
13002500
13002559
13002656
13002756
13002812
13002953
13002969
13003125
13003150
13003281
13003346
13003438
13003543
13003594
13003740
13003750
13003906
13003937
13004062
Cutting ø
mm
+0.000
-0.018
+0.000
-0.025
+0.000
-0.025
Inch
+.0000
-.0007
+.0000
-.0010
+.0000
-.0010
Inch
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
mm
3.175
3.571
3.967
4.366
4.763
5.
5.159
5.5
5.558
5.954
6.
6.35
6.5
6.746
7.
7.142
7.5
7.541
7.938
8.
8.344
8.5
8.733
9.
9.129
9.5
9.525
9.921
10.
10.317
Shank ø
mm
Inch
+.0000 +0.000
-.0030
-0.076
+.0000 +0.000
-.0045
-0.114
+.0000 +0.000
-.0030
-0.076
Dec.
Equiv.
Inch
.1250
.1406
.1562
.1719
.1875
.1969
.2031
.2165
.2188
.2344
.2362
.2500
.2559
.2656
.2756
.2812
.2953
.2969
.3125
.3150
.3281
.3346
.3438
.3543
.3594
.3740
.3750
.3906
.3937
.4062
118°
Shk Ø = Cut Ø
F
ØD
B
A
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Inch
5-1/8
mm
130.
Inch
2-3/4
mm
70.
Inch
2.4
mm
61.
Inch
.0981 - .1290
mm
2.492 - 3.277
5-3/8
137.
3
76.
2.6
66.
.1291 - .1590
3.279 - 4.039
5-3/4
146.
3-3/8
86.
2.9
75.
.1591 - .1910
4.041 - 4.851
6
152.
3-5/8
92.
3.1
79.
.1911 - .2210
4.854 - 5.613
6-1/8
156.
3-3/4
95.
3.2
81.
.2211 - .2530
5.616 - 6.426
6-1/4
159.
3-7/8
98.
3.3
83.
.2531 - .2840
6.429 - 7.214
6-3/8
162.
4
102.
3.4
86.
.2841 - .3160
7.216 - 8.026
6-1/2
165.
4-1/8
105.
3.4
86.
.3161 - .3470
8.029 - 8.814
6-3/4
171.
4-1/4
108.
3.5
88.
.3471 - .3780
8.816 - 9.601
7
178.
4-3/8
111.
3.6
90.
.3781 - .4100
9.604 - 10.414
Shk Ø = Cut Ø
42
© 2005 CJT Koolcarb. Inc.
All rights reserved.
Grind Down Range
Phone: 630-690-5933
800-323-2299
Fax: 630-690-6355
Carbide Tip, General Purpose, Taper Length Tanged Drill
Style 130
EDP #
Cutting Ø
"D"
Inch
13004134
13004219
13004331
13004375
13004528
13004531
13004688
13004724
13004844
13004921
13005000
13005118
13005156
13005312
13005315
13005469
13005512
13005625
13005709
13005781
13005906
13005938
13006094
13006102
13006250
13006299
13006406
13006496
13006562
13006693
13006719
13006875
13006890
13007031
13007087
13007188
13007283
13007344
13007480
13007500
13008125
13008750
13009375
13010000
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
13/16
7/8
15/16
1
mm
10.5
10.716
11.
11.113
11.5
11.509
11.908
12.
12.304
12.5
12.7
13.
13.096
13.492
13.5
13.891
14.
14.288
14.5
14.684
15.
15.083
15.479
15.5
15.875
16.
16.271
16.5
16.667
17.
17.066
17.463
17.5
17.859
18.
18.258
18.5
18.654
19.
19.05
20.638
22.225
23.813
25.4
Dec.
Equiv.
Inch
.4134
.4219
.4331
.4375
.4528
.4531
.4688
.4724
.4844
.4921
.5000
.5118
.5156
.5312
.5315
.5469
.5512
.5625
.5709
.5781
.5906
.5938
.6094
.6102
.6250
.6299
.6406
.6496
.6562
.6693
.6719
.6875
.6890
.7031
.7087
.7188
.7283
.7344
.7480
.7500
.8125
.8750
.9375
1.0000
Overall Length
"A"
Flute Length
"B"
Usable Flute at
Full Regrind
"F"
Grind Down Range
Inch
mm
Inch
mm
Inch
mm
Inch
mm
7-1/4
184.
4-5/8
117.
3.8
96.
.4101 - .4410
10.417 - 11.201
7-1/2
191.
4-3/4
121.
3.8
96.
.4411 - .4730
11.204 - 12.014
7-3/4
197.
4-3/4
121.
3.8
96.
.4731 - .5040
12.017 - 12.802
8
203.
4-3/4
121.
3.8
96.
.5041 - .5340
12.804 - 13.564
8-1/4
210.
4-7/8
124.
3.9
99.
.5341 - .5650
13.566 - 14.351
8-3/4
222.
4-7/8
124.
3.9
99.
.5651 - .5960
14.354 - 15.138
8-3/4
222.
4-7/8
124.
3.9
99.
.5961 - .6280
15.141 - 15.951
9
229.
5-1/8
130.
4
103.
.6281 - .6590
15.954 - 16.739
9-1/4
235.
5-3/8
137.
4.3
108.
.6591 - .6900
16.741 - 17.526
9-1/2
241.
5-5/8
143.
4.5
115.
.6901 - .7210
17.529 - 18.313
9-3/4
248.
5-7/8
149.
4.7
120.
.7211 - .7530
18.316 - 19.126
10
254.
6-1/8
156.
4.9
125.
10-3/4
11
273.
279.
6-1/8
6-3/8
156.
162.
4.9
5
124.
128.
.7841 - .8150
.8461 - .8780
.9091 - .9400
.9711 - 1.0030
19.916 - 20.701
21.491 - 22.301
23.091 - 23.876
24.666 - 25.476
Shk Ø = Cut Ø
www.cjtkoolcarb.com
e-mail: [email protected]
© 2005 CJT Koolcarb. Inc.
All rights reserved.
43

Similar documents

HSS / HSCO Drills

HSS / HSCO Drills Standard NAS907 Type C. Manufactured with short overall and flute length.

More information