GT-600EX

TRUCK CRANE
front
left
rear
right
GT-600EX
60 METRIC TON CAPACITY
Maximum traveling speed: 84 km/h
Maximum gradient: 58%
Carrier
A high-performance engine that meets the EURO Ⅲ standards is mounted on
the carrier. The steering ability of the wheel when the carrier is in a stop condition,
along with the adoption of a new hydraulic suspension system, substantially
improves the mobility of the crane. In addition, the flat carrier fender eases access
to the upper structure.
DIMENSION
WORKING RANGE
45
25˚
5˚
˚
[Telescoping mode ]
G
IN
W
L S50
I
TA 3,6
R
65
43m
Bo
o
70˚
m+
8.8
m
43.
0m 60˚
Bo
om 55˚
The engine used in this model of crane is made by
Daimler and has a maximum output of 260 kW.
It satisfies the EURO Ⅲ standards and is
environment-friendly.
27
19
. 0m
40˚
Bo
om
30˚
Bo
10
20
15
20˚
10
10˚
15
1,800
25
om
Bo
5
MIN. 11,000 - MAX. 43,000
30
5
0˚
0
5,480
35
48˚
m
om
Bo
0m
11
.
40
20
25
30
Working Radius (m)
35
40
0
Continuing technical development requires Tadano to retain the right to
make specifications, equipment and price changes without notice.
13˚
Daimler OM457LA
4-cycle, turbo charged and inter cooled
Max. output 260kW {353PS}
Max. torque 1,850Nm {188kgf-m}
15
.0m
.0m
Bo
o
50˚
295
The full-sized cabin accommodates two passengers.
The telescoping and tilting steering wheel can be
manipulated to adjust the driving position to suit
the operator. Furthermore, the three-way adjustable
air-suspended seat, with headrest, allows comfortable
traveling for the operator.
35.
0m
45
Jib
20˚
Engine
50
Jib
om
Two-person, full-width cabin
m
2,820
m+
15
.2
3,730
81˚
55
Bo
o
Lifting height (m)
43m
MIN. 2,390
MID. 4,600
MAX. 6,800
60
1,965
2,385
1,385
2,580
3,915
10,950
13,170
100
1,400
2,900
1,865
155
*Some specifications are subject to change
Strengthened functions and equipment
Hydraulic suspension
All axles are equipped with a hydraulic suspension system
which helps absorb the shocks and vibrations which take
place due to a change in road conditions (on a bad road) to
realize comfortable roadability.
• Multistage transmission: 9-speed transmission forward
• Differential lock
• Electrically adjustable and defrosting rear view mirror
• Cruise control
• Emergency steering pump for greater safety
• Tool box
TADANO LTD. (International Division)
4-12, Kamezawa 2-chome, Sumida-ku Tokyo 130-0014, Japan
Phone: 81-3-3621-7750 Fax: 81-3-3621-7785
http://www.tadano-global.com E-mail: [email protected]
GT-600EX-1-E-13-3-02-43-479-B3
Printed in Japan
This newly designed truck crane has been
crafted in Japan using the accumulated
engineering prowess of Tadano.
It has a capacity of 60 metric tons.
Maximum traveling speed: 84 km/h
Maximum gradient: 58%
Carrier
Crane capacity: 60,000 kg
5-section long boom: 43.0 m
2-staged bi-fold jib: 8.8 / 15.2 m
Maximum lifting height: 43.1m(Boom)
A high-performance engine that meets the EURO Ⅲ standards is mounted on
the carrier. The steering ability of the wheel when the carrier is in a stop condition,
along with the adoption of a new hydraulic suspension system, substantially
improves the mobility of the crane. In addition, the flat carrier fender eases access
to the upper structure.
58.1m(Jib)
Maximum load radius: 35.7m(Boom)
42.4m(Jib)
Strong winches: 5,600 kgf
Two-person, full-width cabin
Engine
The full-sized cabin accommodates two passengers.
The telescoping and tilting steering wheel can be
manipulated to adjust the driving position to suit
the operator. Furthermore, the three-way adjustable
air-suspended seat, with headrest, allows comfortable
traveling for the operator.
The engine used in this model of crane is made by
Daimler and has a maximum output of 260 kW.
It satisfies the EURO Ⅲ standards and is
environment-friendly.
Daimler OM457LA
4-cycle, turbo charged and inter cooled
Max. output 260kW {353PS}
Max. torque 1,850Nm {188kgf-m}
Strengthened functions and equipment
The GT-600EX has a newly developed rounded solid boom of 43.0 m—the longest boom
in its class. In addition, with the introduction of a new Automatic Moment Limiter model,
the AML-C offers customers a safer operating environment. Further, improved traveling
performance ensures a comfortable drive to work sites.
Hydraulic suspension
All axles are equipped with a hydraulic suspension system
which helps absorb the shocks and vibrations which take
place due to a change in road conditions (on a bad road) to
realize comfortable roadability.
• Multistage transmission: 9-speed transmission forward
• Differential lock
• Electrically adjustable and defrosting rear view mirror
• Cruise control
• Emergency steering pump for greater safety
• Tool box
This newly designed truck crane has been
crafted in Japan using the accumulated
engineering prowess of Tadano.
It has a capacity of 60 metric tons.
Crane
5°
45°
58.1m(Jib)
Maximum load radius: 35.7m(Boom)
The operator can select either of the two boom telescoping
modes based on the designated job plan. This provides
enhanced crane capabilities in accordance with work needs.
Bi-fold fly jib
25°
Crane capacity: 60,000 kg
5-section long boom: 43.0 m
2-staged bi-fold jib: 8.8 / 15.2 m
Maximum lifting height: 43.1m(Boom)
Two telescoping modes [Ⅰ] & [Ⅱ]
The 43-meter boom is the longest in its class.
The rounded boom is made of high tensile steel, which allows for
decreased boom weight as well as increased boom strength.
In addition, the high-performance AML-C secures safe operation.
A two-stage, bi-fold lattice-type jib is
used for this model of crane.
It is offsettable at 5°, 25°, and 45° to
enable the operator to carry out jobs
that require extra reaching ability.
Rounded construction
boom
Mode [Ⅰ]
Mode [Ⅱ]
Mode [Ⅰ] is extension of 2nd section
Mode [Ⅱ] is synchronized extension
only. Then synchronized extension
of 3rd , 4th and 5th sections.
of 3rd , 4th and 5th sections. Then
2nd section independently.
Two winches with cable follower
Both the main winch and the auxiliary
winch have powerful 5.6-ton line pull and
operate at high speeds for increased work efficiency.
Assist cylinder for jib
When mounting and storing the fly jib, assistant hydraulic
cylinders ensure operation, thus increasing the work efficiency
of jib mounting and storage.
Automatic moment limiter [AML-C]
42.4m(Jib)
Strong winches: 5,600 kgf
The easy-to-view AML-C of Tadano’s latest model monitors and
displays crane operating conditions (such as boom length, boom angle,
load radius, swing position, actual load, total rated load, outrigger position,
jib length, jib offset angle, and number of parts of line) to secure safety
in operation. In addition, the AML-C is provided with a working
range limit function.
Operator Comfort
The crane cabin provides improved
livability and offers the operator
a comfortable working environment.
●
The AML-C detects the state of overloading to prevent damage to
the boom and overturning of the crane.
●
The emergency release function restores crane operation even
when the crane is automatically stopped due to overloading.
●
In view of stringent safety measures to be taken, it is advisable that
the emergency release switch key be kept by a work supervisor.
A: Over-front B: Over-rear
C: Over-side D: Over-side
E: Rated Load (O/R max.6.8m)
F: Rated Load (O/R mid.4.6m)
G: Rated Load (O/R min.2.39m)
A
The crane operating
levers are of finger
control type and
surely and steadily
respond to the operator.
The GT-600EX has a newly developed rounded solid boom of 43.0 m—the longest boom
in its class. In addition, with the introduction of a new Automatic Moment Limiter model,
the AML-C offers customers a safer operating environment. Further, improved traveling
performance ensures a comfortable drive to work sites.
The rounded boom
constructed of high tensile steel
contributes to decreased
boom weight and increased
boom strength.
There is no need to detach the counterweights of the GT-600EX
when traveling on roads.
Thus, crane operations can be started once the crane has arrived
at a work site.
Control of asymmetric
outrigger extension width
E
G
F
At all times, the new type AML-C
system offers a maximum “work value” D
for each work area. Even when the
outrigger extension width differs
between the front and the rear of the crane,
or between its two sides, the AML-C detects
such working conditions and displays
the optimal value.
C
B
O/R MIN
O/R MID
O/R MAX
Minimum extension ( 2.39 m )
Middle extension ( 4.6 m )
Maximum extension ( 6.8 m )