PDF Brochure
Transcription
PDF Brochure
ABN 17 100 208 964 METERING PROFILE GAS – WATER & ASSOCIATED CONTROLS Accutherm International is a specialist company supplying high quality gas control products, engineering services and support to all sectors of the gas and water market. Head Office (Melbourne) Sydney Brisbane (Distributor) 18 Pickering Road 2/14 Welder Road 17 Medway Street Mulgrave VIC 3170 Seven Hills NSW 2147 Rocklea QLD 4106 T: +61 3 9763 6335 T: +61 2 9620 4123 T: +61 7 3255 9255 F: +61 3 9763 8003 F: +61 2 9624 2666 F: +61 7 3255 9655 [email protected] www.accutherm.com.au [email protected] Rotary Gas Meters Turbine Gas Meters Diaphragm Gas Meters Turbine Gas Meters GAS Electronic Volume Correctors Dataloggers & Communication Hot & Cold Water Meters WATER Gas Pressure Regulators Filters Slam Shut & Relief Valves Gas Safety Shut Off System Solenoid Valves Gas Detection GAS CONTROL AND METERING SYSTEM SPECIALISTS FMG FLOW METER GROUP FMG specialises in the development and manufacture of energy and gas measurement systems. Located in the Netherlands, FMG produces a wide range of rotary and turbine gas meters, volume conversion devices, master meters and calibration benches. Unique product features include self-diagnosis and tamper prevention. Their wide range includes models up to 40,000 m3/h flow rates. Pressure ratings range are up to 100 Bar. All FMG meters comply with international safety and metrological standards. FMG FMR ROTARY GAS METER The FMR series of rotary gas meters are designed to meet the highest demands of reliable and accurate measurement of gas flow. There compact exchangeable aluminum cartridge allows local repair and on-site cleaning. Installation stresses caused by connecting piping are minimal due to the robust design and construction of the casing and cartridge. Features: • Range from 0.2 to 1,000 m³/h • Connection sizes: DN40 to DN150 • Pressure ratings: PN10 ~ 100 / ANSI150 ~ 600 • Rangeability up to 160:1 • Low frequency pulse output standard • High frequency pulse output optional FMG FMT-Lx TURBINE METER The FMT-Lx series turbine meters are designed to perform at the highest level of accuracy. The meter complies with all international standards and is approved for custody transfer. The unique long body design requires no minimum straight pipe diameters upstream or downstream of the meter. Features: • Range from 5 ~ 10,000 m³/h • Connection sizes: DN50 ~ DN500 • Pressure ratings: PN10 ~ 100 / ANSI150 ~ 600 • Low frequency pulse output standard • High frequency pulse output optional GAS CONTROL AND METERING SYSTEM SPECIALISTS GA SERIES DIAPHRAGM GAS METERS GA Series diaphragm gas meters are suitable for cost effective sub metering – domestic, commercial and industrial applications. The GA Series come standard with a low frequency pulse output for remote monitoring. Features: • Standard sizes fit common connections • Made of steel which is polyester powder plastic coated ideally suitable for outdoor applications • Measures flow mediums of natural gas, LPG and air. • Cost effective • Each meter is fully tested for accuracy • Simple connection to gas pressure regulators • The performance and parameters comply with the following Standards: AS4647 – 2005 (Domestic diaphragm gas meters) EN 1359 - 1999 (Gas meters. Diaphragm gas meters) Minimum Flow: m³/hr Model: Nominal Flow: m³/hr Maximum Flow: m³/hr G1.6 0.016 1.6 2.5 G4 0.04 4 6 G6 0.06 6 10 G10 0.1 10 16 G16 0.18 16 25 G25 0.25 25 40 GAS CONTROL AND METERING SYSTEM SPECIALISTS GWF TRZ RADIAL BLADE TURBINE METERS GAS GWF srl manufacturer’s high quality gas measurement equipment and is the daughter company to the renowned Swiss meter manufacturer GWF AG Luzern. Features: • High quality • Flow ranges: 4 ~ 650 m³/hr • Connection sizes of DN50, DN80 and DN100 • PN16 flange connection • Rated to 6 Bar • Low frequency pulse output standard • High frequency optional ELGAS s.r.o. Elgas s.r.o. specialises in the development, manufacture and supply of data collection equipment in the gas and energy industry. They have smart metering solutions such as volume converters, dataloggers and other communication systems. Elgas miniELCOR Electronic Volume Corrector The miniELCOR is a battery powered EVC, it is suitable for hazardous area applications with the addition of an external intrinsically safe power supply. The system uses secure sealed switches to prevent unauthorised configuration changes and obtaining unauthorised data from the device. It comes equipped with a six button keyboard and backlit graphic LCD display. Users can easily check instant values, device parameters or archives. GAS CONTROL AND METERING SYSTEM SPECIALISTS ELGAS s.r.o Cont. Features: • One channel Electronic Volume Converter (EVC) • Designed to be used for installation in hazardous area – Zones 0, 1 and 2 • Battery lifetime more than 5 years • Fully configurable device (Telves PC Software included) • Graphical backlit LCD display 128 x 64 pixels • Possibility to connect 3rd pressure or temperature sensor • Possibility to connect second EVC as subsystem • Typical error under reference conditions < 0.15 % from measured value (<0.5 % - MID) • Certificate IECEx & ATEX • Protection class IP 66 • Working temperature -25°C to +70°C • Communication: Serial interface: RS232 / RS485, Optical interface: IEC 62056-1 • Four digital inputs/outputs Optional Accessories: • Infrared USB Head HIE-04 • Current Output Module CL-1 (4 - 20 mA) • 240V External Power Supply GWF WATER METERS WATER Accutherm International represents Swiss water meter manufacturer GWF MessSysteme AG. GWF is the market leader for innovative measuring instruments. Their extensive range of intelligent smart metering solutions and world renowned GWFcoder® technology guarantee enhanced energy efficiency. GAS CONTROL AND METERING SYSTEM SPECIALISTS GWF WATER METERS Cont. WATER UNICO Single Jet Water Meter GWF UNICO Single Jet water meter is suitable for cold water application up to 30°C, warm water applications up to 90°C and hot water applications up to 120°C. The UNICO Meter is available in DN15 and DN20. It is suitable for measurement of low flow rates up to 2.5 3 m /hr nominal flow rate. It is a robust design with high grade wear resistant materials and has an excellent measuring stability and reliability. Features: • Single jet dry-dial meter with magnetic coupling • Register can be turned for best readout position • Maximum operating pressure PN 16 bar • Maximum operating temperature: 30°C, 90°C, 120°C • Horizontal or vertical installation • 5 dial resolution • High grade wear resistant and corrosion proof materials • Inlet strainer • Reconditionable and recyclable execution • Conformity to EEC Standard • Available with IP14 Pulse Generator. • UNICOcoder™ models with MBUS interface EN 13757-2/3 MT Multi Jet Water Meter GWF MT Multi Jet water meter range is available in the MTK cold water models, suitable for applications up to 30°C. The MTW warm water models are suitable for applications to 90°C and the MTH hot water models, suitable for applications up to 130°C. Sizes are available in DN15 to DN50 in threaded and flanged models are available in sizes from DN20 to 3 3 DN50. The horizontal models are suitable for nominal flow rates up to 15 m /h and 10 m /hr nominal flow for vertical models. It is a robust meter with a long service life and high grade wear resistant materials. It has an excellent measuring stability and reliability. GAS CONTROL AND METERING SYSTEM SPECIALISTS GWF WATER METERS Cont. WATER Features: • Horizontal or vertical installation (Vertical riser/down pipe) • Register can be turned through 360° • Maximum operation pressure PN 16 bar (Flanged PN 25 bar) • Maximum operating temperature: 30°C, 90°C or 130°C • SVGW Certification, Conformity according to EEC Standard • Available with IP14 Pulse Generator • MT_coder™ models with MBUS interface EN 13757-2/3 Woltman Water Meter GWF Woltman series is suitable for cold water applications up to 50°C and hot water applications up to 130°C. Sizes are available in flanged connection from DN50 to DN300. The WPDK cold water meter range is suitable for nominal flow rates up to 1400 m³/hr. The WPDH hot water range is suitable for nominal flow rates up to 600 m³/h. The Woltman range is a robust design with high grade wear resistant materials, it has an excellent measuring stability and reliability. It has a removable measuring insert which is easily replaceable and retrofitted. Features: • Universal installation position • Straight flow section 3xDN • Register can be turned through 355° • Maximum operating pressure PN16 bar • Maximum operating temperature: 50°C or 130°C • SVGW certification • Flood proof standard pulser register (IP68) with ports for two Reed-RD-Pulsers and one Opto-ODPulser GAS CONTROL AND METERING SYSTEM SPECIALISTS PIETRO FIORENTINI Pietro Fiorentini, have over 60 years of international experience in the design, manufacture and supply of components, systems and services to the transmission, distribution and domestic gas markets. GOVERNER Regulators Fiorentini Minireg spring-loaded governors are designed and built to comply with UNI EN 88 class A group 2 specifications and can be used for all types of natural gas, LPG or non-corrosive gases. These regulators are widely used in supply lines for mixed and combined burners and in the piped distribution of methane gas and LPG in both industrial and non-industrial applications. Features: • Compact models: DN15, DN20, DN25 • Low pressure OPSO models: DN20 & DN25 • Full capacity models: DN15 to DN100 • Spring loaded • Self-acting with balanced stem and seat • Double safety diaphragm • Enables internal use without connecting an external vent pipe • Supplied with internal sensing line and inlet/outlet pressure test points • Limited venting to atmosphere • Easy installation • Recyclable • Aluminium body • Compact lightweight design • Inbuilt filter available • External test points GAS CONTROL AND METERING SYSTEM SPECIALISTS PIETRO FIORENTINI Cont. FE Series OPSO Regulator The FE series of two stage self-driven spring loaded regulators are widely used in installations using natural gas, LPG and other non-corrosive gases. They are designed for either direct installation to a gas meter or used in general pipeline work. Features: • Balanced double stage (2 stage) • Includes Over Pressure Shut Off (OPSO) • Rated 8.6 Bar • Available in: 25m³, 50m³, 75m³ and 100m³ models • Self Driven • High accuracy • High operating reliability • Simple installation • Limited venting • Option to have a double main diaphragm for extra safety • Multiple connections to suit most installations • External test points • Perfect complement for Accutherm meters • Inbuilt filter – 100 micron • Underground models available Model: Capacity Model FE25 Model FEX Outlet Range: mBar Inlet Connection: BSP Outlet Connection: BSP FE25-BP 25 m³ 13-180 15mm 25mm FE25-TR 25 m³ 180-500 15mm 25mm FES-BP 50 m³ 13-180 15mm 25mm FES-TR 50 m³ 180-500 15mm 25mm FEX-BP 75 m³ 13-100 25mm 40mm FEX-MP 75 m³ 100-350 25mm 40mm FEXS-BP 100 m³ 13-100 25mm 40mm FEXS-MP 100 m³ 100-350 25mm 40mm GAS CONTROL AND METERING SYSTEM SPECIALISTS PIETRO FIORENTINI Cont. HP100 First Stage LPG Regulator The HP100 series of spring loaded, diaphragm controlled balanced plug regulators are suitable for medium and high pressures. They are widely used in the distribution of Natural Gas, and LPG where good performance of regulation and fast response to flow rate variations are required. Most commonly used as 1st stage reduction for domestic, commercial and industrial LPG applications. It has 25mm NPT connections and includes over pressure shut off (OPSO). DIVAL 500 Regulator The Dival 500 series of spring loaded, diaphragm controlled balanced plug regulators are suitable for low, medium, and high pressure applications. The Dival 500 Series is available with an integral 20Bar rated Slam Shut valve. DIVAL 600 Regulator The Dival 600 series of direct acting regulators are suitable for low and medium pressure applications controlled by a diaphragm and counter spring. Modular design of this series allows the installation of an incorporated slam shut or device for use as in line monitor on the same body without changing the face-to-face dimension. It has an open top entry design, allowing easy periodical maintenance without removing body from the line. 106 Gas Filter The 106 series of gas filters are designed to filter non-corrosive dry gases at 50 microns. Rated to 10 bar, they are available in BSP threaded models from DN15 to DN50. Flanged models are available in DN50 to DN100 which universal flange suiting ANSI150 and PN16. Model DN150 is 2 Bar rated. GAS CONTROL AND METERING SYSTEM SPECIALISTS ACCU-TEST GAS SAFETY SHUT OFF SYSTEM The ACCU-TEST is an emergency shut off system which is purposely designed to prevent gas being restored to open downstream piping and can easily be linked to emergency interlocks. Features: • Function of pressure proving in accordance to AS5601 Gas Shut Off • Can be monitored by BMS • Required where downstream appliances do not have intgral flame safeguard • Assembled & ready for easy installation • Automatic activation following successul pressure test • Manual activation required following failed pressure test Applications: • Hotels & Motels • Shopping Centres • Hospitals & Health Care Facilities • Sporting Clubs • Laboratories • Restaurants & Commercial Kitchens • Schools & Education Facilities Accessories: Emergency Stop Buttons, interlock relays, signage, gas alarm/sensors (Combustible, CO) Standard Low Pressure 240V Systems: Natural Gas Size: 15mm 25mm 40mm 50mm 65mm 80mm 100mm LPG MJ/h m³/h MJ/h m³/h 307 801 2,261 3,202 4,522 6,288 12,673 7.9 20.6 58.2 82.5 116.5 162.0 326.6 471 1,231 3,472 4,918 6,945 9,659 19,466 4.9 12.8 36.3 51.5 72.7 101.1 203.8 Part Number: LS-FS-015-ACCU-240V LS-FS-025-ACCU-240V LS-FS-040-ACCU-240V LS-FS-050-ACCU-240V LS-FS-065-ACCU-240V LS-FS-080-ACCU-240V LS-FS-100-ACCU-240V *Flow rates based on 2.5 mBar pressure drop For different voltages, sizes or pressures please call 03 9763 6335 GAS CONTROL AND METERING SYSTEM SPECIALISTS HONEYWELL VE Series Soleniod Valve • Normally Closed • Pressure rating up to 36 KPA • 240V Sizes: DN15 ~ DN100 • Low Voltage Sizes: DN15 ~ DN50 Maxon Gas Electro-Mechanical Valves • Sizes: DN20 ~ DN150 • Automatic & Manual Reset • Normally Closed & Normally Open • Unique Sliding Gate Valve Design • Pressure rating up to 8.6 Bar C6097 Series Pressure Switches • Designed for use with gas and air • Suitable for upper & lower limits • IP54 Enclosure standard Fixed Gas Detection • Combustible Gas Monitoring for Meter Room/Boiler Room Applications • Carbon Monixide Monitoring for Car Parks, Kitchens, Laboratories • Carbon Dioxide Monitoring • Oxygen & Other Toxic Gases available upon request S:\SALES & MARKETING\ADVERTISING & MARKETING\ACCUTHERM PROFILES\ACCUTHERM METERING PROFILE JULY 2015.DOCX GAS CONTROL AND METERING SYSTEM SPECIALISTS