Thermal Insulation – Phonic Insulation – Architectural Flexibility

Thermal Insulation – Phonic Insulation – Architectural Flexibility – Time Efficiency – Cost Efficiency
Green Panel offers you a revolutionary insulating method
that will ensure the success of your investment. Thermal and
sound insulation combined in one, only with
THERMAL efficiency
ARCHITECTURAL efficiency
EVOTHERM PLUS protects your home’s
interior environment!
 Due to the various shapes into which the
panels can be formed into perfect insulation is
assured as it is applied on the entire surface.
 Though this method the thermal voids which
might have occurred if applying traditional
materials, are avoided.
 Regardless of the season, the temperature
inside the house is always at an optimal level.
EVOTHERM PLUS panels are flexible and
can be customized to suit your building
plans!
 Due to the unique mix of PIR foam and MGO
boards, EVOTHERM PLUS panels do not affect
the structural integrity of the building.
 EVOTHERM PLUS panels can be cut in
different customized shapes to fit any type of
surface that needs insulation, including curves
surfaces, ending with a perfect finish.
 EVOTHERM PLUS panels can be set without
further need of supplementary materials or
manual labor.
 Easy to work with, Evotherm Plus panels
keep the place clean, without any material
remains.
With EVOTHERM PLUS regardless the
season, the inside temperature will
always be at an optimal level.
EVOTHERM PLUS thermal insulation panels
have the best thermal transfer coefficient,
compared to other alternative insulation
materials or methods, which means minimal
thermal loss.
Effectiveness against FIRE
The major difference between EVOTHERM
PLUS panels and other traditional insulating
products is that EVOTHERM PLUS panels
are incombustible and nonflammable.
This provides a superior protection against the
risk of fire. Its special combined structure of
PIR foam and MGO boards is fire resistant.
MGO board
 Is a revolutionary new board that protects
the building from external factors.
 Fireproof properties – incombustible and
nonflammable.
PIR foam – from ingredients
developed and supplied by
BAYER
 Has one of the best thermal transfer
coefficients in its category of thermal
insulating materials λ = 0.021 W/mK;
density 46kg/ m2
 Offers a continuous insulating process,
without thermal bridges.
 Its insulating properties are preserved
much longer than those of other insulating
materials or alternative methods.
Standard dimensions
Length: 1440mm
Width: 610mm
Now also available for
CLADDING – DIVIDING and FORMWORK
ECOLOGICAL efficiency
EVOTHERM PLUS makes the perfect fit
with a natural way of living!
 Natural product based on rapeseed oil
 Bio-degradable
 Porous structure
 The building breaths
 Does not generate harmful emissions,
ensuring healthy living standards.
PHONIC efficiency
 Being a completely insulating product,
EVOTHERM PLUS panels diminish the noise
transfer infiltrating the building.
 Due to their remarkable sound insulating
properties, beside residential, EVOTHERM
PLUS panels are extremely efficient in
insulating hospital halls, offices, commercial
spaces and other institutional buildings,
offering a near perfect noise sealing.
 The unique structure of EVOTHERM PLUS
panels stops air leakage, effectively buffering
external sounds, thus offering an enhanced
noise comfort to the interior’s environment.
COST efficiency
TIME saving and efficiency
With EVOTHERM PLUS you invest in
long term savings!
With EVOTHERM PLUS you insulate your
house in no time!
 Due to perfect fitting and the structural
qualities of the insulation panels, the cost of
heating is substantially reduced.
 Since it is a self-sufficient insulating
method there is no need for extra
resources or materials, as is the case for
other insulating products.
 Due to simple and fast method of mounting
its quick final assembly will save you up to
four times more than traditional building
methods, its special supporting system, being
an integral component, is delivered with the
panels.
 The panel design is such that it does not
require extra particular finishing, only desired,
the optional architectural ones.
EVOTHERM PLUS installation
 Directly on the wall
 Cladding wall
Please refer to our Technical
Manual for detailed information
Increased strength and resistance during
seasonal weather changes, allowing natural
thermal expanding and contracting all through
the year.
If the surface of the building is not perfect, it
does not require supplementary repairing,
EVOTHERM PLUS panels sufficiently fix and
cover any surface.
The walls breathe due to the porous structure of
the panel membrane which allows the diffusion
of the water vapors from inside the house (if
any) to the exterior, and at the same time
prevents moisture from outside to infiltrate
within.
It does not distort or disfigure through time,
keeping its insulating properties intact.
The panels can be easily fixed to any surface, no
matter the shape. Panels can be specially
ordered for any type of structure.
The reduced weight of the panels has a
minimum effect on the overall weight of the
building, in contrast with other insulating
solutions.
The panel components are derived from
rapeseed oil, making it biodegradable with zero
toxic emissions.
EVOTHERM PLUS panels:
 Easy to apply by simply fixing the panels
with special raw bolts in the building wall.
 Custom delivered in the shape and
dimensions requested by the client
. Assembly time for a building of circa
300 m2 it takes about one day to
complete.
 With the help of the assembling
instructions, they are just as easy to work
with for specialists as they are for those
have no experience in construction.
Factory
Innovations Business Park
Clinceni, Gladiolelor F.N. Street
B12 Compartiment
Ilfov, Romania
Tel: +40 (21) 369.30.73
Fax: +40 (21) 369.30.72
Sales
Marriott Hotel, 6th floor, Office 6.22,
90 Calea 13 Septembrie, 5th district,
Bucharest, Romania
Tel: +40 (21) 403.32.00
Fax: +40 (21) 403.32.01
[email protected]
www.green-panel.eu
Thermal Insulation – Phonic Insulation – Architectural Flexibility – Time Efficiency – Cost Efficiency