lighting - Aqua Services

Transcription

LIGHTING
Navigation Lights
Searchlights & Spotlights
Cabin Lights
3
Perko
4 - 11
Sea-Dog
11 - 13
Attwood
13 - 14
Innovative Lighting
14 - 15
Davis
15
Forespar
16
Aquasignal
16 - 18
Hella
19
Scotty
19
Perko
20
ITT Jabsco / Flojet
20 - 22
ACR
22
Golight
23
Optronics
23 - 24
Sea-Dog
24 - 26
Perko / Ramco
26 - 27
ITC
27 - 29
Hella / TaylorBrite
29
I2Systems
30 - 31
Courtesy / Utility Lights
32 - 35
Flood / Spreader / Docking Lights
35 - 37
Commercial
38
Flashlights
38 - 39
Light Bulbs
Sockets
39
Bulbs
40 - 52
LED Bulbs
51
4
Navigation Lights
Perko LED Stealth Bi-Colour Light
LIGHTING
• Stainless steel, uses 10% of the energy
draw of standard lights.
• For vessels under 12m (39.4')
• 1 mile visibility
• L: 2-1/2" x W: 2-5/8"
Perko Bi-Colour Side Lights
Chrome plated top, black plastic base, red and
green lens.
• Base: 4" x 3-1/8", H: 1-7/8"
PER 615-DP0-STS
PER 1161-DP-CHR
PER 1310-DP-CHR
Chrome plated brass
Chrome plated zinc
Perko Bi-Colour Light
Parts:
ANC 529102
PER 283-DPA-LNS
Bulb (2/pkg)
Red and green lens set
Chrome plated zinc top with black plastic base
and snap in bulb stand. Ultrasonically welded
lenses gasketed to the base.
• 5 year limited warranty
• L: 3-1/4" x W: 2-5/16" x H: 5/8"
PER 227-DP-CHR
Parts:
ANC 529102
Bulbs 2/pkg
Perko Bi-Colour Lights
Plastic base and top with ultrasonically
welded lenses gasketed to the base.
• 2 Mile visibility
• Sold in pairs
• L: 3-1/4" x W: 2-1/4" x H: 1-5/8"
PER 252-WB-DP1
PER 252-BB-DP1
White
Black
Parts:
PER 247-DP-LNS
ANC 529102
Spare Lens
Bulb (2/pkg)
Perko Bi-Colour Side Light
Red and green lens, chrome plated brass top,
black plastic base.
• L: 4-1/4" x W: 2-1/8" x H: 1-3/4"
PER 904-DP-CHR
Parts:
ANC 529102
Perko Bi-Colour Light
Red and green lens, chrome plated brass top
with black plastic base.
• O.D. Base: 2-3/8" x H: 1-3/4"
PER 972-DP-CHR
Parts:
ANC 529102
PER 297-DP-LNS
PER 135
Chrome plated brass top with black plastic
base and mounting gasket. One piece lens/
base assembly.
• 5 year limited warranty
• L: 4" x W: 3" x H: 7/8"
PER 229-DP0-CHR
Parts:
ANC 529102
Bulb (2/pkg)
Red and green lens
Base with socket assembly
Perko LED Side Light
Chrome plated bronze, uses 10% of the
energy draw of standard lights.
• Sold in pairs
• L: 3-1/4" x W: 2" x H: 1-1/8"
PER 602-DP1-CHR
Bulbs (2/pkg)
Red and green lens. Chrome plated zinc.
• Flag staff socket dia: 3/4"
• Base: 6-1/4", 3-7/8", H: 3-3/8"
PER 1218-DP-CHR
Parts:
ANC 529102
PER 259-DPA-LNS
Bulb (2/pkg)
Bulb (2/pkg)
Perko Chrome Plated Zinc Side Light
• Sold in pairs
• L: 5-1/2" x W: 3-1/8" x H: 1-3/4"
PER 1264-DP-CHR
Parts:
ANC 529102
PER 1264-DP-LNS
PER 1264-DP-99A
Bulb (2/pkg)
Socket assembly
5
Navigation Lights
Perko Navigation Lights
Black plastic bases.
• For vessels under 12m (39.4 ')
• Sold in pairs
• L: 4-1/4" x W: 2-3/8" x H: 1-3/4"
Made of corrosion proof plastic.
• Coloured: 1 mile visibility
• White: 2 mile visibility
• H: 3-5/8" (BMD 7") x W :4-1/8" x
Dia: 2-1/2"
LIGHTING
Perko Chrome Plated Brass Side Lights
120-BB
955
915
PER 915-DP-CHR
PER 955-DP-CHR
Horizontal mount
Vertical mount
120-BSD
963
Part #
• H: 1-5/8" x Dia: 2-3/8"
PER 963-DP-CHR
Horizontal mount
Parts:
ANC 529102
Bulb (2/pkg)
PER 281-DPA-LNS Red/green lens (open top) for 915 &963
PER 295-DP-LNS
Red/green lens (closed top)
PER 260-DP-LNS
PER 135
for 915 &963
Red/green lens set for 955
Base/socket assembly for 963
Perko Side Lights
Horizontal Mount
Plastic with ultrasonically welded lenses
gasketed to the base.
• Sold by the pair
• L: 3-1/2" x 2-1/4" x H: 7/8"
PER 253-B-DP1
Parts:
ANC 529102
PER 273-DPG-LNS
PER 273-DPR-LNS
PER 277-DPG-LNS
PER 277-DPR-LNS
Bulb 2/pkg
Green lens for 253
Red lens for 253
Green lens for 254
Red lens for 254
Description
253
120-BMD
Visibility
Arc
Colour
PER 120-BB-DP1
Bi-Colour
225°
Black
PER 120-BP-DP1
Red Side
112-1/2°
Black
Green Side
112-1/2°
Black
PER 120-BSD-DP1
White Masthead
225°
Black
PER 120-BSN-DP1
White Stern
135°
Black
PER 120-WSN-DP1
White Stern
135°
White
Red Side
112-1/2°
White
PER 120-WSD-DP1
Green Side
112-1/2°
White
PER 120-BMD-DP1
Masthead/Deck
225°
Black
PER 120-BM-DP1
PER 120-WP-DP1
Parts:
PER 69-DP-CLR
HLA H83010001
Black
Vertical Mount
• L: 3-1/2" x 2-1/4" x H: 13/16"
PER 254-B-DP1
Black
PER 254-W-DP1
White
120-BP
254
Spare bulb, 12V-10W (2/pkg)
Spare bulb, 12V-20W (Deck light)
6
Navigation Lights
Perko Transom Stern Lights
Perko Chrome Plated Brass Masthead Light
Chrome plated brass, black plastic base
• Black plastic base
• H: 1-5/8" x Base Dia: 2-3/8"
LIGHTING
PER 964-DP-CHR
939
946
PER 939-DP1-12V
PER 946-DP1-12V
L: 5-3/16" x H: 3-3/8" x Depth: 1-1/2"
Dia: 3" x Depth: 1-3/4"
Parts:
PER 70-DP0-CLR
PER 284-DP-CLR
PER 946-DP-99A
Bulb (2/pkg)
Lens w/ gasket 939
Lens w/ gasket 946
PER 945-DP-CHR
PER 965-DP-CHR
Parts:
ANC 529102
PER 74-DP-WHT
PER 281-DPA-WHT
PER 135
Vertical mount
Deck mount
Bulb (2/pkg)
White lens open top (old style)
White lens closed top (new style)
Base with socket assembly
Perko Masthead Light
Perko Chrome Plated Brass Stern Lights
• Chrome plated brass top with black plastic
base
• H: 1-5/8" x Base dia: 2-3/8"
Parts:
ANC 529102
PER 281-DPA-WHT
PER 295-DP-WHT
PER 135
• Black plastic and chrome plated zinc top,
chrome plated zinc base
• H: 3-1/4" x Base: 1" x 2-5/8"
PER 1178-DP-CHR
945
Parts:
ANC 529102
PER 278-DP-WHT
PER 1158-DP-BLK
Bulb (2/pkg)
Lens (2/pkg)
Lens cap & screw
Perko Tri-Colour Navigation Light
Bulb (2/pkg)
965
Lens for 945
Lens for 965
Base and socket assembly for 965
• Black plastic and chrome plated zinc top
with black plastic base
• H: 3-1/4" x Base: 1" x 2-5/8"
PER 1201-DP-BLK
Perko Stern Light
• Chrome plated zinc with a black plastic base
• H: 3-3/4" x W: 1-1/2"
• Replacement light ONLY
Parts:
ANC 529102
PER 278-DP-WHT
PER 268-DP-LNS
PER 1158-DP-BLK
Bulb (2/pkg)
White lenses (2/pkg)
Bi-colour lens set
Lens cap & screw
PER 1332-DP-CHR
Parts:
ANC 529102
PER 278-DP-WHT
Bulb (2/pkg)
Lens (2/pkg)
Perko Masthead Light
• Chrome plated zinc with black plastic base
• H: 3-3/4" x W: 1-1/2"
PER 1331-DP-CHR
Parts:
ANC 529102
PER 278-DP-WHT
Bulb (2/pkg)
Lens (2/pkg)
Perko Combination Masthead
and All-Round White Light
• Fixed mount
• Black plastic and chrome plated zinc top with
black plastic base
• H: 3-1/4" x Base: 1" x 2-5/8"
PER 1183-DP-CHR
Parts:
ANC 529102
PER 278-DP-WHT
PER 1158-DP-BLK
Bulb (2/pkg)
Lens (2/pkg)
Lens cap & screw
7
Navigation Lights
Perko Removable Bi-Colour Pole Light
Clear fresnel globe, xed mount, black plastic base
• Base Dia: 2-1/16"
Locking collar. Black plastic top, 3/4" diameter
anodized aluminum tube. Chrome plated brass and
black plastic base.
• Screw size: #8
• Uses a 2-pin mounting base (see below)
• Pole length: 12"
• Base sold separately
Height 4-1/2"
Height 11"
PER 455-DP1-CHR
PER 455-DP2-CHR
Parts:
SPE 90
PER 248-DP-CLR
Bulb
Globe
455-DP2
PER 1612-DP2-BLK
Parts:
PER 1045-P00-DP
ANC 529102
PER 283-DPA-LNS
Perko All-Round Light
• White translucent plastic globe on a black
plastic base
• For vessels under 20m
• Use #8 fasteners.
• H: 3-7/8" x Base: 1 x 2-5/8"
Comes with stow-a-way plug in type base,
plastic adapters for at or V type 45º wind shields
and a chrome plated zinc mounting bracket.
Tubing is 3/4" anodized aluminum.
• Use #8 screws
Bulb
Lens
and All-Round White Lights
• Tubing is 3/4" anodized aluminum
• Base: 1" x 2-5/8"
PER 1196-DP1-CHR
PER 1196-DP2-CHR
PER 1197-DP-CHR
Height 5-1/16"
Height 11-1/4"
Height 4" no base
Parts:
ANC 529102
PER 278-DP-WHT
PER 1158-DP-BLK
Bulb (2/pkg)
Lens (2/pkg)
Lens cap & screw
Perko Replacement Light Assembly
For Perko models 1236 & 1283 lights.
PER 240-DP-LNS
► Also See:
Bases pg 39
Plug-in base
Bulb (2/pkg)
Spare lenses (pair)
and All-Round Light
PER 120-SWB-DP1
Parts:
SPE 1004
PER 201-DP-WHT
LIGHTING
Perko All-Round White Lights
1196
PER 1124-DP2-CHR
Height 22"
Parts:
ANC 529102
PER 278-DP-WHT
PER 125-DP-BLK
PER 1124-DP-99A
PER 1158-DP-BLK
Bulb (2/pkg)
Lens (2/pkg)
1124
Spare cap for base
Base & socket assembly only
Lens cap & screw
and All-Round White Lights
1184
1197
Fold-down windshield mount. Black plastic and chrome
plated tops.
3/4" anodized aluminum tube.
• H: 12-5/8"
PER 1181-DP-CHR
PER 1184-DP-CHR
Hor mount, base 2" x 1-1/2"
Ver mount, base 2-1/4" x 5/8"
Parts:
ANC 529102
PER 278-DP-WHT
PER 1052-DP-CHR
PER 1054-DP-CHR
PER 1144-A00-BLK
PER 1158-DP-BLK
Bulb (2/pkg)
Lens (2/pkg)
Bracket w/ knob & end plug for 1181
Bracket w/ knob & end plug for 1184
Knob
Spare top cap with screw
8
Navigation Lights
LIGHTING
Perko White All-Round Light
This stow-a-way plug in type white all around light
features a chrome plated brass top. Tubing is 3/4"
anodized aluminum.
• Vertical height: 21-7/8"
Surface Mount
Cast bronze with chrome plated nish.
• H: 2-7/8" x Base dia: 2-1/2"
PER 371-DP-CHR
PER 1209-DP2-99A
Parts:
SPE 90
PER 1125-DP-99A
PER 248-DP-CLR
Pipe Mount 1/2" NPT
Cast bronze with chrome plated nish.
• H: 3-1/4"
Spare bulb
Plug-in socket
Clear fresnel globe
PER 362-DP-CHR
Perko All-Round White
Telescoping Pole Lights
Parts:
SPE 90
PER 248-DP-CLR
Chrome plated zinc tops and bases. 3/4" dia.
anodized aluminum tubes.
• Base: L: 3-3/4" x W: 1-5/8"
Perko All-Round Light
Cast bronze nish, base has 1/2" NPT threads
for mounting. 2 mile visibility. Use a 15W
medium screw base bulb (not included).
• Height: 6-1/2"
• Replacement ONLY
PER 1311-DP2-CHR
PER 1311-DP3-CHR
PER 1311-DP4-CHR
20-1/8"
26-5/8"
32-3/8"
Parts:
SPE 1004
PER 248-DP-CLR
PER 1059-T00-DP
Bulb
Globe
Telescoping base (16° Rake)
Perko All-Round Pole Lights
Chrome plated top and base with 3/4" anodized aluminum tube.
Fold down windshield mount.
• H: 13-1/2"
PER 1134-DP-CHR
PER 1137-DP-CHR
Hor mount, base 2" x 1-1/2"
Ver mount, base 2-1/4" x 5/8"
Parts:
SPE 90
PER 201-DP-WHT
PER 1054-DP-CHR
PER 1144-A00-BLK
Bulb
Globe
Bracket with knob and end plug
Knob (old style)
Bulb
Globe
1137
PER 309-B00-PLB
White lens
Parts:
PER 106-000-GRY
SED 441027-1
ANC 511016
Grey tinted globe
12V-15W (1/pkg)
12V-15W (1/pkg)
Perko White All-Round Light
• “Reduced glare design”
• Black plastic top and base
• Tubing is 3/4" anodized aluminum
• H: 6-7/8" x Base: 1" x 2-5/8"
PER 1604-DP-CHR
Parts:
PER 338-DP2-CLR
PER 238-DP-BLK
Bulb (2/pkg)
Lens assembly
Perko All-Round White Stow-A-Way Light
“Reduced glare design” features clear uted globe,
horizontal mount, fold-down adjustable angle. Chrome
plated zinc base. Tubing is 3/4" anodized aluminum.
• For vessels under 20m (65')
• H:13-3/8"
Removable light with waterproof cover for base.
Chrome plated zinc top and base. 3/4" diameter
anodized aluminum tube.
• L: 20-1/16 x Base: 3-3/4" x 1-5/8"
PER 1634-DP-CHR
PER 1637-DP-CHR
Parts:
PER 239-DP-BLK
PER 338-DP2-CLR
PER 1052-DP-CHR
Hor mount, Base: 2" x 1-1/2"
Ver mount, Base: 2-1/4" x 5/8"
Lens assembly
Bulb 2/pkg
Bracket (1634)
PER 1330-DP2-CHR
Parts:
SPE 90
PER 248-DP-CLR
PER 1059-P00-DP
Bulb
Globe
Plug-in base (16° Rake)
Navigation Lights
Perko Universal Replacement
Stow-A-Way All-Round Lights
PER 1400-DP2-CHR
PER 1400-DP4-CHR
PER 1400-DP6-CHR
Length 24"
Length 36"
Length 48"
Parts:
SPE 1004
PER 201-DP-WHT
PER 1045-P00-DP
PER 1046-P00-DP
PER 1048-P00-DP
PER 1059-T00-DP
PER 1060-PB0-DP
Spare bulb
Spare globe
Round plug-in base (vertical)
Rectangular plug-in base (5° rake)
Oval plug-in base (5° rake)
Plug-in base (5° rake)
Perko Universal Replacement Lights
White all-round light, plastic top, 12V bulb,
3/4” dia. anodized tubing, Stow-A-Way
plug-in design.
• Universal type plug
• Two globes, a reduced glare globe for
preserving night vision and a full output
globe for cockpit illumination
• Universal t threaded & locking collars,
while the pole has two key slot positions
providing maximum base compatibility
• Universal angle tilting head provides a 40°
(+/-20°) angle to match most popular base
angles
• For vessels under 20m (65.6’)
PER 1470-DP4-CHR
PER 1470-DP5-CHR
PER 1470-DP6-CHR
36" straight
42" straight
48" straight
PER 1451-DP6-CHR
PER 1451-DP8-CHR
48" folding
60" folding
Accessories:
PER 338-DP2-CLR
PER 239-DP-BLK
PER 1045-P00-DP
PER 1046-P00-DP
PER 1048-P00-DP
PER 1059-T00-DP
PER 1060-PB0-DP
Spare bulb (2/pkg)
Spare lens assembly
Round plug-in base (Vertical)
Rectangular plug-in base (5° Rake)
Oval plug-in base (5° Rake)
Perko All-Round Replacement Lights
These replacement reduced glare white all around lights t
into 1059 and 1060 vertical series bases. Made from
3/4" diameter anodized aluminum with locking collar.
PER 1440-DP2-CHR
PER 1440-DP3-CHR
24" pole light
30" pole light
Parts:
PER 338-DP2-CLR
PER 238-DP-BLK
PER 1045-P00-DP
PER 1046-P00-DP
Spare bulb (2/pkg)
Lens assembly
Round plug-in base (vertical)
Perko “Reduced Glare” Replacement
All-Round Lights
Tubing is 3/4" anodized aluminum and is available with
a locking or threaded collar (base is not included). Fits
bases with 5o angle. Has clear uted lens and black
plastic top.
• For vessels under 20m (65)
PER 1445-DP4-CHR
PER 1445-DP5-CHR
PER 1046-P00-DP
PER 1060-PB0-DP
36" pole locking
42" pole locking
Parts:
PER 338-DP2-CLR
PER 238-DP-BLK
Spare bulb (2/pkg)
Lens assembly
Perko Base & Socket Assembly
Plug-in type, waterproof screw on cap with plastic
adapters for “V” or at mount style lights.
• Use #8 screws
• 3/4" x 2-1/4"
PER 1124-DP-99A
Perko Plug in Type Socket
This waterproof plug in type socket ts the
Perko 1209 series white all around lights.
• Use #8 screws
PER 1125-DP-99A
16° tube angle
Perko Plug-in Type Base
Plug-in 2 contact base ts Perko lights
1343, 1348, 1400, 1445, 1451, 1455,
1456, 1465, 1470. Black plastic and
chrome plated zinc alloy construction
with a black plastic insert.
• Waterproof snap-on cover
• L: 3-3/4" x W: 1-3/4"
PER 1060-PB0-DP 5° Rake
LIGHTING
Designed to t plug-in style bases. Plastic
top and 3/4" anodized aluminum pole.
9
10
Navigation Lights
Perko Telescoping Type Bases
LIGHTING
1059-T00-DP
Fits Perko lights of the 1311 and 1611 series. Locking
collar is included with base to allow interchangeability
with discontinued style bases.
Replaces catalogue #1156-000-CHR and 1026-T00-CHR.
• L: 3-3/4" x W: 1-5/8"
• 16° rake
Base Only
PER 1059-T00-DP
Base & locking collar only
Complete Unit
Includes a 2-pin plug in with wire leads and a waterproof
snap-on cover.
Fits Perko lights 1343, 1348, 1451, 1470, 1622 & 1656.
PER 1059-P00-DP
Perko 200 Series Navigation Lights
200 Series Top Mount Navigation Lights
• Made from black plastic
• Screw size #8
• Overall height: 4-13/16" x Lens H: 2-3/4" x D:
3-5/16"
Part #
Description
Visibility
Bulbs
PER 200-BT-DP1
Bi-Colour
225°
12V-25W
PER 200-PT-DP1
Red Side
112-1/2°
12V-25W
PER 200-SDT-DP1
Green Side
112-1/2°
12V-25W
PER 200-MT-DP1
White Masthead
225°
12V-10W
PER 200-SNT-DP1
White Stern
135°
12V-10W
PER 200-TWT-DP1
Yellow Towing
135°
12V-10W
Complete
Perko Pole Light Mounting Base
For Perko stow-a-way pole lights with locking
collar on pole (locking collar is included).
Black plastic and chrome plated brass
construction with a waterproof snap-on cover.
• Double contact
• Diameter: 2-1/4"
200 Series Base Mount Navigation Lights
Same as above but base mounts.
• Screw size #10
• Overall H: 4-7/8" x Lens H: 2-3/4" x O.D.base: 3-5/16"
Visibility
Bulbs
PER 200-BB-DP1
Bi-Colour
225°
12V-25W
PER 200-PB-DP1
Red Side
112-1/2°°
12V-25W
Perko Pole Light Mounting Base
PER 200-SDB-DP1
Green Side
112-1/2°
12V-25W
Plug in type water resistant slide cover. For
Perko stow-a-way pole lights with locking
collar on pole.
• Double contact
• 3-1/2" x 1-1/2"
PER 200-MB-DP1
White Masthead
225°
12V-10W
PER 200-SNB-DP1
White Stern
135°
12V-10W
PER 200-SWB-DP1
White All-round
360°
12V-10W
PER 200-TWB-DP1
Yellow Towing
135°
12V-10W
PER 1045-P00-DP
PER 1046-P00-DP
Vertical
For Perko stow-a-way pole lights with locking
collar on pole. Black plastic and chrome
plated brass construction with a waterproof
snap-on cover.
• Double contact
• 3-1/2" x 2"
5° Rake
Perko 200 Series Mounting Bracket
Bracket allows you to mount 200 series lights
onto a 1/2" pipe thread (i.e. pipe nipple or
piping with 1/2" pipe thread). Comes with
mounting screws and gasket.
PER 222-DP-BLK
Description
5° Rake
Perko Pole Light Base
PER 1048-P00-DP
Part #
O.D. 3-5/16"
200 Series Base Mount Navigation Lights
Tri-colour-all-round light, visibility arc 360°.
• Dual purpose all-round light
• For vessels under 20m (65.6') while under sail
power only
• Two 12V bulbs (25W and 10W)
• Overall H: 8-5/8", OD base: 3-5/16"
PER 200-TAB-DP1
Parts:
ANC 529340
ANC 529343
ANC 529341
ANC 529344
ANC 529342
12V-25W bulb
12V-10W bulb
24V-25W bulb
24V-10W bulb
32V-25W bulb
11
Navigation Lights
Description
Visibility
Arc
Overall
Height
Lens
Height
PER 109-G00-BLK
Green Side Light
112-1/2°
5-1/4"
4-1/4"
PER 109-R00-BLK
Red Side Light
112-1/2°
5-1/4"
4-1/4"
PER 110-000-BLK
White Masthead
225°
5-1/4"
4-1/4"
PER 111-000-BLK
White Stern
135°
5-1/4"
4-1/4"
PER 111-M00-BLK
Yellow Towing
135°
5-1/4"
4-1/4"
PER 108-000-BLK
White All-round (pole)
360°
6"
5"
PER 108-R00-BLK
Red All-round (pole)
360°
6"
5"
Part #
LIGHTING
Made from plastic with gloss black "Perko Kote" nish.
• For vessels under 20 meters (65.6 ft.)
• 3 Mile visibility (110-000-BLK)
• Bulbs are sold separately
• Use #10 screws
Spare Lenses:
PER 259-CL2-GRN
PER 259-CL2-RED
PER 106-000-GRY
112-1/2°
112-1/2°
360°
Green
Red
Grey
Bulbs:
PER 70-DP1-CLR
PER 67-DP2-CLR
PER 70-DP2-CLR
12V
24V
32V
(2/pkg)
(2/pkg)
(2/pkg)
Made from black plastic complete with pre-wired double contact
socket and 3 feet of 16/3-SJO cable for 12, 24, 32 or 120V. Watertight
access cap for rebuilding and cleaning.
• For vessels 20 meters (65.6 ft.) to 50 meters (164.0 ft.)
• 5 Mile visibility (1128-A00-BLK)
• Bulbs are sold separately
• Uses 1/4" screws
• Overall Height: 7-1/2" x lens height: 4-1/2"
Part #
Description
Visibility Arc
PER 1127-RA0-BLK
Red Side
112-1/2°
PER 1127-GA0-BLK
Green Side
112-1/2°
PER 1128-A00-BLK
White Masthead
225°
PER 1129-A00-BLK
White Stern*
135°
PER 1129-MA0-BLK
Yellow Towing
135°
PER 1130-A00-BLK
White All-Round*
360°
PER 1130-RA0-BLK
Red All-Round
360°
*Note: Supplied with a grey tinted lens.
Parts:
PER 134
PER 1105-000-BLK
PER 1119
ANC 529300
ANC 529301
ANC 529302
ANC 529303
Double contact socket
Access cap O-ring & retainer
O-ring for cap
12V-30W bulb
24V-30W Bulb
32V-30W Bulb
120V Clear bulb
Sea-Dog Bi-Colour Bow Light
Sea-Dog Bi-Colour Bow Light
Made of die-cast zinc and injection molded
nylon, chrome plated.
Made of die-cast zinc, chrome plated.
SED 400155-1
SED 400157-1
Parts:
ANC 529102 Spare bulb (2/pkg)
*Note* Not for new construction-Replacement ONLY
Parts:
SPE 90
Spare bulb
12
Navigation Lights
Sea-Dog LED Bow Light
• Stamped 304 stainless steel
• Approved for USCG 2 NM
(Colreg 2 mile)
• 12 volt
LIGHTING
SED 400050-1
Pair of green and red lights.
• Uses #4 RH fasteners
• H: 1-3/8" x Dia: 2-5/16"
SED 400160-1
Parts:
Sea-Dog Stainless Steel
Bi-Colour Bow Light
• H: 1-3/8" x Dia: 2-5/16"
SED 400150-1
Parts:
SPE 90
SED 400151-1
Sea-Dog Stainless Steel Side Lights
Bulb
Lens
Sea-Dog LED Side Lights
• LED top mount navigation lights
construction
• USCG approved, 2 NM
• 12 Volt
• 3-5/8" x 3" x 1-1/4" high
SPE 90
SED 400161-1
• H: 1-3/8" x W: 2-5/16" x L: 4"
SED 400170-1
Parts:
SPE 90
SED 400161-1
• H: 1-3/8" x Dia: 2.5/16"
SED 400165-1
Parts:
SPE 90
SED 400161-1
SED 400070-1
SED 400073-1
Stainless steel
Black
• Flush mount LED side lights
• Stamped stainless steel construction
• USCG approved, 2NM
• 12 volt
• W: 2-5/16" x L: 7-3/4" x D: 2-11/16"
SED 400080-1
Sea-Dog
Stainless Steel Flush Mount Side Lights
• W: 2-5/16" x L: 7-3/4" x D: 2-11/16"
SED 400180-1
Parts:
SPE 90
SED 400181-1
Bulb
Lens
Bulb
Lens
SED 400035-1
• Includes one starboard (green) and one
port (red) light
• Stamped 304 stainless/nylon
• L: 3-7/8" x W: 2-1/4" x H: 1-7/8"
Bulb
Lens
Bulb
Lens
Sea-Dog Stainless Steel Stern Light
• H: 1-3/8" x Dia: 2-5/16"
SED 400130-1
Parts:
SPE 90
SED 400121-1
Bulb
Lens
Sea-Dog Stainless Steel Masthead Light
• H: 1-3/8" x Dia: 2-5/16"
SED 400120-1
Parts:
SPE 90
SED 400121-1
Bulb
Lens
Sea-Dog Stainless Steel All-Round Light
• H: 1-5/16" x Dia: 2-5/16"
SED 400140-1
Parts:
SPE 90
SED 400121-1
Bulb
Lens
Navigation Lights
Sea-Dog LED Transom Lights
• Stamped 304 stainless/nylon
• Dia: 3-3/16"
Stainless
Black
Sea-Dog LED Transom Light
• Approved for USCG 2 NM (Colreg 2 mile)
• 12 volt
• W: 4-3/4" x H: 2-3/4"
SED 400065-1
Sea-Dog Stainless Steel Transom Light
Made from stamped 304 stainless steel.
• W: 5-1/8" x H: 3-1/8" x D:1 "
SED 400136-1
Attwood Bi-Colour Bow Light
Die-cast zamak housing with
Perma-Plate chrome nish.
• For vessels under 12 meters (39.4 ft)
• H: 1-3/8" x L: 2-3/4" x W: 2-1/2"
ATT 6375-D6
Parts:
ATT 6375-205-1
SPE 90
Lens for 6375-D7 light
12V bulb
Attwood Quasar Bi-Colour Bow Lights
Smooth contours will not snag lines. Single
stainless screw holds cover to base, permitting
easy servicing. 7" wire leads for connection to
12V power supply.
• H: 1-3/8" x L: 3"
ATT 3121-7
ATT 3123-7
White
Chrome w/ black base
Parts:
ANC 529102
Spare bulb (2/pkg)
Sea-Dog LED All Around Light
Attwood Transom Stern Light
Parts:
SED 441071-1
Bulbs (2/pkg)
• Injection molded nylon
• Chrome plated zinc
• Approved for USCG 2NM (2 mile)
• 12 Volt DC
SED 400016-1
SED 400017-1
24" - 48"
36" - 60"
Sea-Dog Fold Down All Around Light
• Injection molded nylon and chrome plated zinc
construction
• Comes with a translucent lens
• 12V-12W
Stainless steel construction.
• 2 mile visibility Diameter: 3"
ATT 6356-D7
Parts:
SPE 90
ATT 6356-03-1
Bulb
Lens
Attwood Side Lights
Housing is die-cast ZAMAK with chrome nish.
• Uses #10 screws
• H: 2-1/2" x L: 3"
• Base width: 2-5/8"
Horizontal Deck Mount
SED 400110-1
Light complete
Parts:
SED 400111-1
SED 441004-1
ATT 6358-R7
ATT 6358-G7
Replacement lens
Replacement bulb (2/pkg)
Vertical Deck Mount
Port side
Starboard side
ATT 6359-R7
ATT 6359-G7
Port side
Starboard side
Attwood Bi-Colour Bow Side Light
Parts:
SPE 90
ATT 6357-203-1
ATT 6357-204-1
Bulb
Red lens
Green lens
• S/S construction and rubber gasket seals lens to the base
• Use #6 screws.
• H: 1-7/8" x W: 2-1/4" x D: 2-1/2"
ATT 66318-7
Parts:
ANC 529102
Spare bulb (2/pkg)
LIGHTING
SED 400060-1
SED 400063-1
13
14
Navigation Lights
Attwood Replacement Parts
Attwood All-Round Lights
Replacement globe for early 4900, 5400,
5401 series lights.
Complete Assembly:
Plastic head - chrome plated base features noncorrosive
plastic socket and swivel cover. 3/4" diameter aluminum
pole. 2 mile visibility.
• Complete with 12V bulb
ATT 5424-71-1
LIGHTING
Attwood Plug-In Base
• Rugged stamped stainless steel cover
• 2-3/8” diameter, when closed, 3/8” high
• Molded inner cap seals water out
• Inner socket contains a large drain hole
For use with all:
• 2-pin contact sockets
• For locking collar poles
• Straight poles
ATT 91024-7
Attwood Anti-Glare Pole Light
Anti-glare lens focuses light beam to reduce operator glare. 42"
pole. This light comes with a universal 2-pin
socket with locking collar, which is adaptable
to most competitive bases.
• For vessels under 20 meters (65.6 Ft.)
ATT 5330-42-7
Parts:
SPE 906
ATT 911339-7
PER 1045-P00-DP
PER 1046-P00-DP
PER 1048-P00-DP
PER 1059-T00-DP
PER 1060-PB0-DP
Light
Spare bulb
Base only
Attwood Folding All-Round Light
This new folding light from Attwood solves the problem
of storing long all-round lights. It has all the features of
the Anti-Glare light plus it folds in half for easy stowage.
The mid point hinge is corrosion resistant, glass lled
black plastic with a durable hinge pin.
ATT 5340-54-7
Folding light 54"
Parts:
SPE 906
ATT 911339-7
PER 1045-P00-DP
PER 1046-P00-DP
PER 1048-P00-DP
PER 1059-T00-DP
PER 1060-PB0-DP
Spare bulb
Base only
ATT 7100-A7
ATT 7100-B7
ATT 7100-C7
Length 24"
Length 30"
Length 36"
Base:
Constructed of die-cast Zamak with a Perma-Plate
chrome nish. Socket is keyed to prevent incorrect
insertion of pole light. Fits 12° angled pole lights with 2
pin connectors. Includes 7-1/2" wire leads for connection
to 12 VDC power supply.
• L: 4" x W: 1-5/8"
ATT 911339-7
Base only
Head & Pole:
ATT 5110-24-7
ATT 5110-30-7
Assembly, length: 24"
Assembly, length: 30"
Parts:
ATT 91017-B1
ATT 91017-B7
ATT 9024-05-1
SPE 90
Replacement screw-on globe, bulk
Replacement screw-on globe, packaged
360° globe for 9000 series lights
Bulb each
Innovative Lighting
LED Bi-Colour Side Lights
• Operates 9-16V DC systems
• 50,000 hours of service life
• Uses only 1 watt of energy
• Stainless steel housing
• Hard wire leads
• L: 3.45” x W: 2.60” x D: 1.65”
INO 550-1100-7
INO 550-1200-7
Enamel baked white S/S
Stainless steel
Innovative Lighting
LED Vertical Mount Side Lights
• Uses only 1/2 watt of energy
• Hard wire leads
• L: 3.37" x W: 2.3"
INO 554-1200-7
Navigation Lights
Innovative Lighting
LED Deck Mount Side Lights
INO 552-1200-7
Innovative Lighting
All-Round LED Folding Stern Light
• Single LED con guration
• Rotates 360 degrees
• 50,000 Hours LED service life
• Energy draw 120 milliamperes
• Durable stainless steel pole
• 3.38” x 1.25” rectangular base
• 14” long shaft
INO 501-0300-7
Innovative Lighting
All-Round LED Pedestal Mount Stern Light
• Operates 12V DC systems
• Vibration and shock proof
• Equipped with stainless steel shaft
• Height: 8", Base: 3” x 1”
INO 500-0200-7
Innovative Lighting
All-Round LED Plug-In Stern Light
• Pull-up / push - down operation extends from
2' to 6'
• Equipped with stainless steel shaft
• 2.62” x 1.63” rectangular base
INO 512-1200-7
Innovative Lighting
Powerlight LED Telescoping Stern Lights
All-round motorized stern light is easily installed with no
change in current switch required.
• Operates 12V DC systems
• 50,000 Hours service life
• Uses only 3 watts of energy
• Automated up/down, w/ contained storage space
• Certi ed ignition protected
• Durable stainless steel telescopic pole
• Requires 20-1/4" gunnel depth, 1-3/4" deck hole
• 2.36" deck ring
INO 504-1200-1
INO 505-1200-1
4'
5'
Innovative Lighting
Manual LED Telescoping Stern Light
• 50,000 Hours led service life
• Requires 1-3/4” hole
• Durable stainless steel telescopic pole
• Easy pull-up/push-down hand operation
• Requires 20-1/4" gunnel depth, 2.36" deck ring
INO 515-1200-1
Davis Mega Light Masthead
• Comes mounted to a stainless bracket for
easy installation to a masthead, interior
wall or bulkhead
• Draws less than 1/10th amp
• Automatically switches on at dusk and
switches off at dawn
• Light height: 3"
• Includes 2 bulbs (1892 & 1893)
• Comes with 12” 930 cm 2 lead wire
• Bracket height 3-1/2"
• Includes mounting screws
DIN 3310
Parts:
DIN 3330
SPE 1891
SPE 1813
Replacement bulbs - 1 each of
1892 14.4V 0.12A 1000 hrs
1893 14V 0.33A 7500 hrs
14V .24 amp bulb
14V .10 amp bulb
LIGHTING
• Uses only 1/2 watt of energy
• Hard wire leads
• L: 3.25" x W: 2.6"
15
16
Navigation Lights
LIGHTING
Forespar Combination Deck/Bow Light
Forespar Combination Spreader/Deck Light
Features separate switching, 6" triple lead wire and is made from a
noncorrosive, durable molded polymer that saves weight and limits
corrosion on the mast. Also incorporated is a readily adaptable
wraparound mounting apron to accommodate virtually any mast
surface curvature.
• H: 5-3/4"
Model ML-1 is a deck light designed primarily for installation
on the mast. Made from a noncorrosive, durable molded polymer
that saves weight and limits corrosion on the mast. Incorporates
a readily adaptable wraparound mounting apron to accommodate
virtually any mast surface curvature.
• H: 3-5/8"
FRS 132000
FRS 132200
ML-2 light
Stainless chafe guard
Parts:
FRS 132025
FRS 132035
Top bulb, 10W-.8 amp
Bottom bulb, 20W-1.4 amp
FRS 131000
Light
Parts:
FRS 132035
FRS 132200
Bulb, 20W-1.4 amps
S/S chafe guard
AquaSignal 20 Series Navigation Lights
• Polycarbonate black body and lens
• Screw-in base
• For vessels to 39 feet (12 meters)
• Visibility: 2 nautical miles
Part
20200-7
20300-7
20100-7
20040-7
Function
Description
Bulb
Mount
HxWxD
AQS 20100-7
Bi-Colour
White
90496-7
Horizontal
2" x 1.9" x 2.5
AQS 20200-7
Side Light - Starboard
Green
90496-7
Horizontal
2" x 1.9" x 2.5
AQS 20300-7
Side Light - Port
Red
90496-7
Horizontal
2" x 1.9" x 2.5
AQS 20040-7
All-Round
White, 12V-5W
90384-7
Pedestal
4" x 2.4"
AQS 20180-7
All-Round
White, 12V-5W
90384-7
Pedestal
18" x 2.4"
20180-7
AquaSignal 23 Series LED Portable Navigation Lights
• Waterproof oating design
• Tough double o-ring seal and shock resistant
rubber housing with rubber booted on-off switch
• Requires 4 "AA" batteries, not included
• Vessels under 7 meters
Part
23400-7
Function
Mount
H x Dia.
AQS 23400-7
Bi-Colour - Red/Green
Suction cup, c-clamp
6.5" x 2.56"
AQS 23402-7
Bi-Colour - Red/Green
In atables
6.5" x 2.56"
AQS 23410-7
Stern - White
In atables
6.5" x 2.56"
AQS 23490-7
All-Round - White
Suction cup, c-clamp
6.5" x 2.56"
AQS 23440-7
All-Round-Pole - White
Pole
24" x 2.56"
23402-7
23410-7
23490-7
23440-7
17
Navigation Lights
25100-7
25404-7
25000-7
25400-7
Part
Function
Description
Bulb (12V)
Bulb (24V)
Mount
HxWxD
AQS 25100-7
Bi-Colour
Red/Green
AQS 90200-7
AQS 90201-7
Vertical
2.9" x 2.5" x 2.28"
AQS 25200-7
Green
AQS 90200-7
AQS 90201-7
Vertical
2.9" x 2.5" x 2.28"
AQS 25300-7
Side Light - Port
Red
AQS 90200-7
AQS 90201-7
Vertical
2.9" x 2.5" x 2.28"
AQS 25400-7
Masthead
White
AQS 90200-7
AQS 90201-7
Mast
2.9" x 2.5" x 2.28"
AQS 25500-7
Stern
White
AQS 90200-7
AQS 90201-7
Vertical
2.9" x 2.5" x 2.28"
AQS 25000-7
All-Round
White
AQS 90200-7
AQS 90201-7
Vertical
2.95" x 2.4"
AQS 25404-7
Masthead/Deck
White
AQS 90200-7
AQS 90470-7, 20W
N/A
Mast
5.45" x 7" x 2.4"
AquaSignal 32 Series LED Navigation Lights
• Rigid, nonmagnetic polycarbonate black body/lens and stainless
steel side skirts
• For vessels under 50 meters (164 ft)
• Quick t lights allow easy dismantling for transport or storage
32202-7
32000-7
32410-7
Function
Description
Mount
HxWxD
AQS 32202-7
Green, 1.5W
Horizontal
2.6" x 2" x 1.7"
AQS 32302-7
Side Light - Port
Red, 1.5W
Horizontal
2.6" x 2" x 1.7"
Part
AQS 32502-7
Stern
White, 1.5W
Vertical
2.6" x 2" x 1.7"
AQS 32000-7
All-Round
White, 1.5W
Vertical
2.2" x 2.6"
AQS 32503-7*
Stern (white body)
White, 1.5W
Vertical
2.6" x 2" x 1.7"
AQS 32410-7*
Masthead/Anchor
White, 4.5W mast, 1.5W anchor
Vertical
4" x 3.8"
AQS 32706-7*
Tri-Colour/Anchor
Red/Green/White, 4.5W mast, 1.5W anchor
Vertical
6.1" x 3.8"
*Quick t system lights
*Request Items
AquaSignal 33 Series LED Navigation Lights
• Completely sealed and waterproof with IP66, IP67, IP68 testing and certi cation
• Absolutely maintenance free
• Long lifetime and low power consumption (0.18 amps)
• Nearly identical footprint to series 31 & 32 generation LED's
• 12 volt DC applications
• H: 52mm x W: 68mm
33202-7
Housing
Function
Description
AQS 33202-7
AQS 33203-7
Part
Black
White
Green
AQS 33302-7
AQS 33303-7
Black
White
Side Light - Port
Red
AQS 33502-7
AQS 33503-7
Black
White
Stern
White
33302-7
33502-7
32706-7
LIGHTING
• Rigid, nonmagnetic polycarbonate black body/lens and
stainless steel side skirts
18
Navigation Lights
LIGHTING
• Rigid, nonmagnetic polycarbonate body/lens and
stainless steel side skirts
Part
40100-7
40000-7
Function
Description
Bulb
Mount
HxWxD
Details
AQS 40100-7
Bi-Colour
Red/Green, 20W
ANC 529340
Vertical
5.1" x 3.5" x 3.1"
24V ANC 529341
AQS 40200-7
Green, 20W
ANC 529340
Vertical
5.1" x 3.5" x 3.1"
24V ANC 529341
AQS 40300-7
Side Light - Port
Red, 20W
ANC 529340
Vertical
5.1" x 3.5" x 3.1"
24V ANC 529341
AQS 40400-7
Masthead
White, 20W
ANC 529343
Vertical
5.1" x 3.5" x 3.1"
Steaming, ANC 529344
AQS 40500-7
Stern
White, 20W
ANC 529343
Vertical
5.1" x 3.5" x 3.1"
24V ANC 529344
AQS 40502-1
Stern
Yellow, 20W
ANC 529343
Vertical
5.1" x 3.5" x 3.1"
24V ANC 529344
AQS 40000-7
Masthead
White, 20W
ANC 529340
Horizontal
4.98" x 3.5"
24V ANC 529341
40806-7
40700-7
40606-7
Part
Function
Description
Bulb
Mount
H x Dia
Details
AQS 40606-7
Tri-Colour/
Anchor
Red/Green/White,
25W
ANC 529340
Deck/Mast
6.5" x 3.5"
24V ANC 529341
AQS 40700-7
Tri-Colour/
Anchor
Red/Green/White,
25-10W
ANC 529340
Deck/Mast
8.7" x 3.5"
24V 25W ANC 529341
24V 10W ANC 529344
AQS 40706-7
Tri-Colour/
Anchor
Red/Green/White,
25-10W
ANC 529340
ANC 529343
Deck/Mast
10.35" x 3.5"
24V 25W ANC 529341
24V 10W ANC 529344
AQS 40806-7
Tri-Colour/
Anchor/Strobe
Red/Green/White,
25-10-8W
ANC 529340
ANC 529343
Deck/Mast
10.35" x 3.5"
24V 25W ANC 529341
24V 10W ANC 529344
Parts:
AQS 40901-1
Pulpit rail mount
* Quick t system allows easy dismantling for transport or storage.
• Powerboat/Sailboat 12V 25W
• Rigid polycarbonate black body/lens
• Comes with self adhesive gasket used as a drilling template
• Screws included
• For vessels to 65 feet (20 meters)
• Visibility: 2 nautical miles, masthead 3 miles
Part
Function
Description
Bulb
Mount
Size
Details
AQS 41100-7
Bi-Colour
Red/Green
ANC 529340/529343
Vertical
4.1" x 3.6" x 3.2"
24V ANC 529341
AQS 41200-7
Green
ANC 529340
Horizontal
4.1" x 3.6" x 3.2"
24V ANC 529341
AQS 41300-7
Side Light - Port
Red
ANC 529340
Horizontal
4.1" x 3.6" x 3.2"
24V ANC 529341
AQS 41400-7
Masthead
White
ANC 529343
Vertical
4.1" x 3.6" x 3.2"
24V ANC 529344
AQS 41404-1
Masthead/Fordeck
White
ANC 529343
Vertical
8.3" x 5.3"
24V ANC 529344
AQS 41500-7
Stern
White
ANC 529343
Vertical
4.1" x 3.6" x 3.2"
24V ANC 529344
Navigation Lights
Hella Marine Navigation Lights
Hella Stern Lights
• Compact, ush-mounted
• All plastic noncorrosive materials
• For use on power/sail driven vessels under 12
meters
• Minimum visible distance is 2 nautical miles
• L: 2-3/4" x H :2-7/16"
Replacement
Bulb
Part #
Colour
Description
HLA 002984305
Black
Masthead
ANC 529343
HLA 002984315
Black
Combination Side
ANC 529340
HLA 002984325
Black
Stern
ANC 529343
HLA 002984335
Black
Red Side
ANC 529340
HLA 002984345
Black
Green Side
ANC 529340
HLA 002984505
Black
Anchor
ANC 529343
HLA 002984355
White
Masthead
ANC 529343
HLA 002984375
White
Stern
ANC 529343
HLA 002984385
White
Red Side
ANC 529340
HLA 002984395
White
Green Side
ANC 529340
HLA 002984565
White
360o Anchor
ANC 529343
12V-25W bulb
24V-25W bulb
32V-25W bulb
12V-10W bulb
24V-10W bulb
Black housing
White housing
Parts:
ANC 529102
12V bulb
Hella Folding Masthead/Anchor Light
• UV and impact resistant plastic housing and lens
• Anodized aluminum pole
• For use on power/sail driven vessels under 12 meters
• Minimum visible distance is 2 nautical miles
• Height:20"
• Comes with mounting screws & backing plate
HLA 995003031
Black
Parts:
ANC 529102
12V bulb
Scotty SEA-Light For Paddlers
Waterproof and corrosion resistant, includes 20"
pole and removable light that can be attached to a
life jacket. Runs up to 8 hours on 2 AA batteries
(not included). Choice of mounts between the #241
side/deck mount or the #244 ush deck mount.
USCG approved, visible up to 2 miles.
Hella Marine Navigation Lights
Impact and corrosion resistant black or
white plastic housing.
• 1 mile visibility (red & green)
• 2 mile visibility (masthead & stern)
• H: 3" x W: 2-1/2" x D: 2-1/16"
SCO 823
SCO 824
Part #
Colour
HLA 003562005
Black
Masthead
HLA 003562015
Black
Stern
HLA 003562025
Black
Green Side
HLA 003562035
Black
Red Side
Description
HLA 003562045
Black
Combination Side
HLA 003562105
White
Masthead
HLA 003562115
White
Stern
HLA 003562125
White
Green Side
HLA 003562135
White
Red Side
HLA 003562145
White
Combination Side
HLA 002492201
Black
360o Anchor
Parts:
ANC 529104
HLA 995004001
HLA 995004011
Spare bulb (2/pkg)
Comes w/ #244 deck mount
Comes w/ #241 ush mount
Scotty Marker Lights
Super tough polycarbonate fresnel lens and
bronze double contact bulb socket.
Pole mount:
• 3/4” I.P.T. base
• Overall length 5”
• Bulb not included
SCO 802C
SCO 802R
Clear
Red
Surface mount
• 3-1/4” diameter at base
• Overall length 4-1/2”
SCO 803C
SCO 803R
Clear
Red
Parts:
SPE 90
SPE 94
6CP, 13V
15CP, 12.8V
LIGHTING
Impact and corrosion resistant black
plastic housing.
• Masthead 3 mile visibility
• H: 4-1/4" x W: 4-1/4" x D: 3-1/2"
Parts:
ANC 529340
ANC 529341
ANC 529342
ANC 529343
ANC 529344
19
20
Searchlights
ITT/Jabsco
150 Series 6" Remote Control Searchlight
Perko Searchlight
LIGHTING
• Chrome plated brass head and
plated bronze base
• Switch located in head
• Convenient handle on back of head
for easy control
PER 534-003-32V
Dia.
Range
(miles)
Base
Overall
Height
CP
7"
5/8
4-7/8" x 3-1/8"
12-1/2"
260,000
Replacement bulbs:
GEL 4543
12V
GEL 4541
24V
GEL 200PAR
32V (200W 30V PAR 56)
• Complete drive unit contained in light
head
• Single lever/touchpad control for
vertical and horizontal movement
• Two speeds
• Auto sweep mode, moves light side to
side automatically
• Full 360° horizontal rotation & 70°
vertical sweep
• Chrome nished brass housing for saltwater environment
• Additional station can be added with dual station kit
• Spot/ ood sealed beam produces 200,000/50,000 CP
• H: 13" x W: 6" x D: 11"
ITT 63022-0012
Parts
ITT 64046-0006
Perko Deck Control Searchlight
• Chrome plated brass head and plated
bronze base
• Maximum ceiling thickness 4-1/2"
• Lever handle controls horizontal &
vertical movements
Exact same features as the 63022-0012 unit except
that this unit comes with a high intensity discharge
bulb that can produce 600,000 CP
ITT 63042-1224
PER 535-003-12V
Dia.
7"
5/8
Base
Control
Length
CP
4-7/8" x 3-1/8"
7-1/2"
250,000
Perko 314 Series Searchlights
• Chrome plated brass head with
chrome plated bronze base
• 12V, 7" & 8" sealed beam units
• Lever action, pilot house control
• 380° horizontal movement, 70°
vertical movement
• For ceiling thickness of up to 5"
• Lever handle controls both
horizontal and vertical movement
L
Range
Miles
CP
Watts
PER 314-C07-12V
7"
24"
5/8
250,000
100
PER 314-C08-12V
8"
26"
3/4
500,000
250
12V (8")
Control panel
ITT/Jabsco
12 Volt 130 & 180 Series
Remote Control Searchlights
Part #
Head
Dia.
Replacement bulb:
PER 433-004-12V
12V
Solid brass construction with a polished
chrome nish. Comes with a chrome zinc
base. Designed for handling severe marine
conditions. The watertight control panel
features ngertip control for 370o horizontal
sweep and 65o vertical motion. Dual speed for precise beam
control, and on/off switch for spot or ood beam. Light head can
be moved manually without damage. Complete with wiring cable
assembly. The secondary control unit features: watertight design,
attractive style, built in fuse connectors, and 2-speed control for
precise beam aiming.
• Comes complete with station selector panel
Replacement bulbs:
GEL 4543
12V
GEL 4541
24V
GEL 200PAR
32V (200W-30V, PAR 56)
Part #
Replacement bulb
6" High Intensity Searchlight
Accessories:
ITT 43690-1000
Range
(miles)
12/24V light
Dia
Spot/Flood
HxD
ITT 62026-4002H
5"
100,000/50,000
10-3/4" x 8-1/2"
ITT 62040-4002
7"
200,000
13" x 11-3/4"
Parts:
ITT 43670-0003
ITT 67294-0000
ITT 43990-0013
ITT 43990-0014
ITT 43990-0015
ITT 43990-0016
GEL 4700
GEL 4545
Replacement control
Bulk cable
10' wiring cable assembly
Replacement 5" bulb
Replacement 7" bulb
Searchlights
21
ITT/Jabsco 135SL Remote Control Searchlight
The sealed beam halogen bulb, with a 15 Lux value and 175,000
candle power produces the dusk to dawn piercing light that
enables boaters to extend their day. Tough all weather, corrosion
resistant construction. Full 3600 rotation with 600 of vertical sweep.
Complete with a 15' cable assembly and control switch.
• Amp draw- 4 Amp. @ 12V
• H: 8-15/16" x W: 8-1/2" x D: 10-1/8"
A stylish and very practical addition to any small to medium
size boat - at a surprisingly affordable price. Tough all-weather,
corrosion resistant construction. Precise 320° arc, and 75° vertical
sweep. New easy- t black control panel has a fused on/off switch
and 8-way directional switch for
precise beam control. Complete with
15' cable. All stainless steel mounting
ttings.
• 12V, 50W
• 100,000 candle power
• Amp draw: 3.6
• H: 7-7/8" x W: 7"
ITT 60080-0012
Option:
ITT 43670-0004
Second station kit
Parts:
GEL H7935-1
ITT 43990-0013
ITT 43990-0014
ITT 43990-0015
ITT 43990-0016
Spare bulb 4" x 6"
10' Harness
15' Harness
25' Harness
35' Harness
Sweeping curves complement the latest pleasure pro les. Fingertip
control of the watertight halogen sealed
beam will pick out hazards up to 900 ft.
away.
• 100 000 CP
• 320º horizontal rotation - 75º
vertical sweep
• Comes complete with joystick
remote or optional touch pad remote control including joystick
• Expandible, can add a second remote station
ITT 61050-0012
ITT 61050-1224
12V joystick control
12/24V electronic control
Parts:
ITT 43670-0004
GEL H7935-1
ITT 43990-0013
ITT 43990-0014
ITT 43990-0015
ITT 43990-0016
Second station kit
Spare bulb 4" x 6"
10' Harness
15' Harness
25' Harness
35' Harness
ITT/Jabsco
Wireless Secondary Remote Control Kit
Adds secondary wireless control to existing searchlight
installations for both console and remote control lights
• Can be installed for wireless only operation
• 12 and 24vdc
• True 8-way control
• On/Off and Spot/Flood (for applicable model lights) function
selection with LED battery check
• Receiver fuse size: 10 amp
ITT 60000-0000
ITT 60020-0000
Complete unit
Option:
ITT 43670-0005
Dual station control kit
Parts:
GEL H9405
ITT 60030-0000
ITT 43990-0013
ITT 43990-0014
ITT 43990-0015
ITT 43990-0016
Replacement sealed beam
Replacement control panel
10' Harness
15' Harness
25' Harness
35' Harness
ITT/Jabsco Dual Lamp Searchlight
The Ray-Line SL-255 remote control searchlight gives a
night piercing 200,000 candlepower from dual halogen sealed
beam lamps. The epoxy painted, heavy duty, thermoset plastic
housing horizontally rotates for a full 360o sweep. The "bulb
only" movement gives a 60o vertical sweep. The light's rugged
construction makes this the ideal modern searchlight for medium
to large vessels. Comes complete
with a 2-speed, watertight, remote
control switch and 25' of cable.
• H: 8-13/16" x W: 10-1/2" x D:
10-15/16"
ITT 60010-2012
12V
Parts:
ITT 43670-0004
ITT 18753-0350
ITT 43990-0013
ITT 43990-0014
ITT 43990-0015
ITT 43990-0016
GEL H7604
Second station kit
Drive motor
10' Harness
15' Harness
25' Harness
35' Harness
Replacement bulb
• Dual beam halogen bulb gives 200,000 candlepower
• True spot/ ood capability
• Wireless control system (100' line of sight)
• In nite motion capabilities with 8-way touch pad
• 27° vertical elevation
• Sweep feature
• Fast and slow speeds
• H: 8" x W: 9.4" x L: 9.6"
• Bolt pattern 3.78", base dia: 4-3/4"
ITT 60233-0012
12V
Parts:
ITT 64042-1007
Wiring harness 15'
LIGHTING
22
Searchlights
Flojet Wireless Remote Spotlights
LIGHTING
• 12V-50W sealed beam halogen spotlight, 4 amps, 100,000 CP
• Clutch mechanism prevents motor damage at the 30° sweep
stop
• Easy installation
• 100' range
• Auto off feature
• 7-7/8"H x 7-1/16"W x 7-1/2"D
FLJ 08035-100
Wired Remote Spotlight
• 12V-50W sealed beam halogen
spotlight, 4 amps, 100,000 CP
• Clutch mechanism prevents
motor damage at the 30° sweep stop
• Multiple function wired remote
• H: 7-7/8" x W: 7-1/16" x D: 7-1/2"
FLJ 08135-100
Parts:
GEL H9405
4" x 6" bulb
ACR
RCL-100D Single Lens
Remote Control Searchlights
• RCL-100D - 200,000 candela
• Internal elevation mechanism
provides pitch control of spotlight
beam while protecting elevation
mechanism from weather.
• High intensity 55W Halogen lamps and parabolic re ectors
provide intense concentrated spotlight beam
• Housing rotates a full 360° allowing all-around illumination
capability
• Includes a ngertip remote control Point Pad. Up to six remote
Point Pad units may be installed on system
• Die-cast with the most corrosion-resistant grade aluminum alloy
available for a rugged weatherproof enclosure
• Colour: White
• 8.0" x 9.0" x 8.0"
• 7.2 lbs
ACR 1930.3
ACR 1931.3
RCL-100D (12V)
RCL-100D (24V)
Parts:
ACR 6001
ACR 6003
ACR 9282.3
ACR 6002
12V bulb for a 1930.2 & 1930.3
24V bulb for a 1931.2
Point pad remote kit
12V bulb for a 1939.2
ACR
RCL-75 Remote Control
Searchlight
A 180,000 candlepower, dual lamp,
remote controlled searchlight. All of the
light’s electronics are in the head, whose
design creates a watertight compartment
in the back of the light head for the
electronics. The housing is made from
a robust polycarbonate. Gimbaled on
two pivot points, the RCL-75 uses a rack and pinion to provide the
user with 360° horizontal rotation and a total of 63° of pitch up
and down. Mated with ACR’s Point Pad™ style joy-stick, the hard
wired remote control is offered with both an easy to install standard
con guration or a sub-surface mounting version.
• 7 wire 17" wire harness.
• H: 8-11/16" x W: 7-5/8" x D: 7"
ACR 1946
12V Searchlight
Parts:
ACR 9403
12V-55W Halogen bulb
ACR Point Pad Universal Remote Control
• Consists of universal master control unit
and a Point Pad; installed via
single coaxial cable
• URC-102 provides optimum
voltage to ensure brightest
performance and long lamp life,
regardless of boat system voltage uctuations
• URC-102 XRCiZ feature rotates and moves light assembly
every 30 days from activation to keep all bearing surfaces
free of corrosion and all electrical contacts functional (can
be disabled)
• On-Off and light rotation speed control
• Point Pad allows nger tip control; surface/ ush mount
options included
• Has the capacity to perform up to six different duties; ideal
for searchlights, winches and other electrical devices
• Easily retro tted to most servo-motor drives
• Compatible with 12 or 24VDC operation
• Surface mount: 3.75" x 2.87" x 1.23"
• Flush mount" 4.25" x 3.32" x .4"
Point pad, mounting hardware & cable
ACR 9282.3
Point pad, master control, mounting hardware & cable
ACR 9283.3
Searchlights
Golight Remote Search Lights
Wireless remote controlled permanent
mount search light.
• 7" x 7" x 6.5"
• Programmable, wireless remote
• Mounting hardware
GLT 2000
Dash mount remote controlled permanent
mount search light.
• 7" x 7" x 6.5"
• Dash mount remote included
• Wiring harness
GLT 2020
Parts:
GLT 2020D
Remote
Dual remote controlled permanent mount
searchlight.
• 7" x 7" x 8"
• Dash mount remote
• 20' wiring harness w/ quick
disconnects
Golight
Striker Wireless Series
A more powerful version of the
Golight family with all the same
quality built features.
• 370° rotation x 135° tilt
• 500,000 candle power, 5.5
Amps
• UV ray and saltwater resistant
• Integrated 12V DC high-torque motors
• Weatherproof for land and sea applications
• Waterproof remote transmitters
• R.F. Programmable super heterodyne receiver
• 5-Year limited warranty
• Base: 5-1/4" x 5" H: 6-3/4" x W: 7-1/4" x D: 6"
GLT 3049
GLT 3066
GLT 3067
GLT 3100
GLT 3106
GLT 3151
Wireless dash & handheld remotes - Black
Wireless dash & handheld remotes - Chrome
Wireless dash & handheld remotes - White
Wireless dash remote - White
Wireless dash remote - Chrome
Wireless dash remote - Black
Parts:
GLT 39000
Spare 9011 bulb 3" x 5-1/2"
Golight Gobee Wireless Series
• 360° rotation x 90° tilt
• Dual speed
• 1000 Lumens, 55 watt
• Integral bi-colour navigation light
• Compact handheld wireless RF remote
with 16 different programmable security
settings
• UV and salt water resistant
• 12" Stanchion mounts light above the
trolling motor
• Installs in any 2 or 3 pin bow light
socket
• Includes nylon carry bag
• Overall height: 18" Head H: 6" x W: 6" x D: 8"
• 1-Year limited warranty
GLT 2151
GLT 2067
Wireless remote controlled portable search light.
• 7" x 7" x 8"
• Suction cup, magnetic mount shoe
• Amber snap-on lens
• Heavy nylon carrying case
• 15' cord w/ 12vdc plug end
GLT 7901
Parts:
GLT 49000
H-9 Replacement bulb
Optronics Blue Eye Beam
Deck Mounted Spotlight
400,000 CP deck mounted spotlight.
Durable housing resists weather, corrosion
and chipping. Blue eye lens suppresses
wave lengths that would otherwise re ect
back to you as glare. Aluminum gimbal
mount allows 360º rotation. Knob locks
spotlight into desired position, or you can
hand hold. Sealed weather-proof push
button switch. 10' coil cord comes with
battery clips.
OPT XB-4001
170W, Par 46 sealed beam
Parts:
OPT BB-4000
Replacement bulb
LIGHTING
New CR5 Pentabeam Technology
• 400,000 candlepower, 60% more usable light
• 5 sided re ector captures and directs more usable light which
helps to eliminate dark spots
• Reaches distances to one-half mile
• Powerful 65W bulb with concentrated beam re ector casts
broad spectral pattern
• 370 degrees horizontal rotation and 120 degrees vertical
elevation/depression
• Three year limited warranty
Housing - heat resistant, high impact, weather resistant housing
with highest quality UV material.
Gears and transmission parts/engineering Lexan, and brass
Motor - Automotive grade 12V DC High Torque
• Wireless Remote allows for operation up to 100 feet.
23
24
Spotlights / Cabin Lights
Optronics Blue Eye Beam
Hand Held Spotlight
LIGHTING
These portable 400,000 CP spotlights are
speci cally designed for the saltwater
environment . The housing is made from
corrosion and chip resistant ABS plastic in
blue with a white trim. The blue eye sealed
beam virtually eliminates re ective glare and
enables the beam to penetrate fog, rain, snow,
windshields and even water. Comes with a S/S
hanger, sealed push button switch and 10' white coil cord with
cigarette lighter plug.
OPT KB-4001
170W, Par 46 sealed beam
Parts:
OPT BB-4000
Replacement bulb
Optronics Night Blaster
Halogen Spotlights
12V powerful halogen sealed beam
produces intense white, brighter beam.
Ergonomically designed. Push button
trigger switch. Detachable 10' coil cord
with in-light storage compartment.
OPT QH-2000
OPT QH-100
Black 100W/ 2,000,000 CP
Black 55W/ 1,000,000 CP
Parts:
OPT A-700
55W replacement halogen bulb
Cordless Rechargeable
Spotlight
Dual power with internal battery or
12 volt cord. Momentary switch with
lock prevents accidental discharge.
Convenient wrist carrying lanyard.
Complete with AC/DC and 12V auto
chargers. LED indicator alerts you when batteries are charging.
Marine glare reduction lens.
Optronics Replacement Bulbs
OPT A704
OPT A705
OPT A709
OPT BB-4000
OPT BC-4000
OPT BH-1200
Halogen bulb for QR-5000
H3, 12V-100W bulb
H1, Halogen 12V-30W for QH-1000/1002
Blue Eye sealed beam, 16V- 400,000 CP
Sealed beam, 16V- 400,000 CP
Sealed beam 12V 200,000 CP
AquaSignal
Halogen 'Toronto' Cabin Light
• Reading and chart table light adjusts
from white to blue for chart reading
• On/off switch
• Spiral cord stretches to 4'
• Comes with two slip-in wall mount
brackets
• Black plastic housing
is shock resistant,
noncorrosive, nonmagnetic
and seawater resistant
• 12 volt, 5 watt
AQS 15404-7
Parts:
ANC 529355
12 volt .42 amp, 5 watt bulb
Sea-Dog Cabin Light
Each cabin light has a polished brass body with a
white translucent shade. Traditional styling. Prewired with an on/off switch and a 12V-10W DC
double contact bayonet bulb. Uses #6 round head
screws.
SED 400430-1
Parts:
SPE 1004
12V bulb
OPT QR-2001
100W, 2,000,000 CP
Parts:
OPT A708
Sea-Dog Halogen Reading Light
Halogen bulb for QR-2001
Chromed brass lamp with 2" re ector and clear glass lens.
10W-12V MR-16 halogen bulb.
Halogen Spotlights
12V powerful halogen sealed beam
produces intense white, brighter beam.
Utilizes a Marine Glare Reduction lens.
Ergonomically designed. Push button
trigger switch. Detachable 10 ft. coil cord
with in-light storage compartment.
OPT QH-2001
OPT QH-101
White 100W, 2,000,000 CP
White 55W, 1,000,000 CP
Parts:
OPT A-700
55W replacement xenon bulb
SED 400565-1
Light
Parts:
SED 441816-1
10W-12V bulb
25
Cabin Lights
Sea-Dog Stainless LED Dome Lights
Lacquer coated highly polished brass body
with brass knurled adjustment knobs. Interior
of body is nished in white enamel. Unit is
pre-wired with on/off switch. Comes with
12V-15W screw in bulb. Uses #6 round head
screws.
Stamped stainless body with a glass lens
and built in switch.
SED 400410-1
Parts:
SED 441027-1
12V bulb
Sea-Dog Brass Berth Light
Attractive solid brass berth light with rotary
switch. Comes complete with 12V, 14 CP
bulb and #6 brass fasteners.
SED 400400-1
Parts:
SPE 1004
A
B
C
Fastener
SED 400193-1
4"
SED 400203-1
5"
5-1/2"
2"
#4 RH
6-3/4"
2-1/8"
#6 RH
Sea-Dog Stainless Dome Lights
• Polished stainless steel
• Glass dome
• Built in switch
• Double contact bayonet base
• 21 CP bulb
12V bulb
Sea-Dog Swivel Light
Machined and stamped polished brass. Each
swivel light has a polished brass body featuring
a bell-shaped shade. Interior surface of lamp
shade is white enamel. Pre-wired with on/
off switch and 12V-10W DC double contact
bayonet bulb.
• Uses #6 round head screws
SED 400420-1
Parts:
SPE 1004
Part #
12V bulb
Sea-Dog LED Berth Light
• Chromed plastic
• MR-16 LED bulb
• Rated at 12 volt, 10 watt DC
• H: 4-13/16" x D: 4-1/8"
Part #
A
B
C
Fastener
SED 400190-1
4"
5-1/2"
2"
#4 RH
SED 400200-1
5"
6-3/4"
2-1/8"
#6 RH
Parts:
SPE 1142
SED 400191-1
SED 400201-1
Bulb
4" Lens
5" Lens
Sea-Dog Day/Night Stainless Dome Light
• Stamped stainless steel
• Rated 12V-15W
• 5" Lens and a 6-3/4" wide base
• One clear circuit and one red circuit
• Built-in switch
• Use #6 RH fasteners
SED 400350-1
SED 400825-1
Parts:
SED 400201-1
SED 441142-1
SED 441143-1
Sea-Dog Bunk Light
Sea-Dog Brass Dome Lights
Each bunk light has a exible goose
neck allowing multiple adjustments.
Polished brass light shade with
12V-10W DC double contact bayonet
bulb. Pre-wired with an on/off switch in
the base.
• Uses #6 round head screws
SED 400440-1
Parts:
SPE 1004
• Stamped polished brass
• Lacquer coated
• Glass dome
• Built in switch
• 21 CP bulb
Part #
12V bulb
Lens
Clear bulb
Red bulb
A
B
C
Fastener
SED 400195-1
4"
5-1/2"
1-13/16"
#4 RH
SED 400205-1
5"
6-3/4"
2-1/16"
#6 RH
Parts:
SED 400191-1
SED 400201-1
SPE 1142
4" Replacement lens
5" Replacement lens
Bulb 12V-15W
LIGHTING
Sea-Dog Large Brass Berth Light
26
Cabin Lights
Perko Bulkhead Reading Lamps
• Brushed stainless body with polished gold
titanium trim ring
• Frosted glass lens
• Built in switch
• Moulded black plastic
• Bulbs not included
• Wall plate size: 4-1/2" x 3-3/4"
LIGHTING
PER 1303-001-BLK
3"
Size 1 has bayonet double contact socket
and will accept bulbs up to 24 watts
Part #
A
B
C
Fastener
SED 402195-1
4"
6-1/16"
1-3/4"
#6 FH
SED 402205-1
5"
7-1/2"
2"
#8 FH
Parts:
SED 400191-1
SED 400201-1
SPE 1142
PER 1303-002-BLK
4-1/2"
Size 2 has medium screw socket and will
accommodate bulbs up to 40W.
Perko Bulkhead Reading Lamp
Chrome plated zinc. Medium screw socket. Turn
switch. For systems up to 50V. Bulb not included.
• Base size: 2-1/2" x 1-3/4"
4" Replacement lens
5" Replacement lens
Bulb 12V-15W
PER 217-DP-CHR
• Brushed stainless body with polished
stainless trim ring
• Frosted glass lens
• Built in switch
Perko Dual Voltage Light
• For 12 and 120V
• White translucent plastic globe
• Chrome plated zinc base
• Built- in junction box
• 2 - 15W-120V and 2 - 15CP x 12V bulbs
• L: 9-3/4" x W: 3-1/2" x D: 1-7/8"
Part #
A
B
C
Fastener
SED 402190-1
4"
6-1/16"
1-3/4"
#6 FH
PER 318-DP
SED 402200-1
5"
7-1/2"
2"
#8 FH
Parts:
SPE 1004
Parts:
SED 400191-1
SED 400201-1
SPE 1142
4" Replacement lens
5" Replacement lens
Bulb 12V-15W
Ramco Halogen Dome Light
For general cabin illumination; overhead or
bulkhead surface mounting. Clear, frosted
lens, white plastic only. 0.70 amps @10W
• Diameter: 4.3" x H: 2.3"
Perko Exterior Dome Light
Ivory "Perko-Kote" powder coating
with black vinyl mounting gasket. Water
resistant push button switch.
• Lens OD 4", base OD 5",
overall depth 1-7/8"
• 15 CP bulb
PER 1253-DP1-WHT
Light
Parts:
SPE 1004
12V bulb
15CP x 12V Tube
RAM 241131-60
Parts:
ANC 529362
12V bulb
Ramco Incandescent Lights
Slim pro le, incandescent ceiling lights.
Opaque lens. Integral rocker switch (es), easy
installation. 6 CP bulb.
Perko Surface Mount Dome Lights
• Push-button switch
• Double contact bayonet socket
Part #
Part #
Diameter
Depth
Spare Bulb
PER 300-DP0-CHR
3-3/4"
1-1/2"
SPE 90
PER 300-DP2-CHR
6"
2"
SPE 1142
Colour
Bulbs
LxWxD
RAM 105466
Black
2
7-1/2" x 4" x 1-1/4"
RAM 105460R
White
2
7-1/2" x 4" x 1-1/4"
Parts:
SPE 906
12V bulb
Cabin Lights
Ramco Chart-Reading Light
RAM 24022-71R
Parts:
SPE 1816
ITC Dual Radiance Overhead Halogen Light
Neutral white surface mount housing. These lights feature a soft
and powerful glow from the entire glass lens surface.
• Ideal replacement of uorescents
• Soft, frosted glass lenses
• Mercury free
• Three position switch (one light on, two lights on, both off)
• Dual, 20W halogen bulbs
• 3.34 amp draw
12V bulb
Ramco
Surface Mount Reading Lights
Provides a directional, narrow beam of
bright reading light by utilizing a prismatic
re ector. Ideal as a passenger reading light
as the concentrated beam does not disturb
the driver. Black plastic housing, integral
rocker switch, easy installation. 12V x 3
CP bulb (s).
• Double: L: 6-1/4" x W: 2-7/8" x H: 1-3/4"
RAM 109446
• Single: L: 4" x W: 2-7/8" x H:1-3/4"
RAM 109246
Parts:
SPE 168
12V bulb
ITC Halogen Hardtop Light
• Indoor/Outdoor
• Fully sealed & watertight
• 316 S/S trim ring
• 20 watt halogen bulb
• Total dia: 6", light: 4.5", cutout: 3.5"
• Screws included
ITC 81235SS-D
ITC 81237-W-D
Parts:
ANC 529367
ITC Prism Overhead Halogen Lights
Available in gloss white, brushed nickel or chrome, these
lights require less than 1/2” recess depth and a
2-1/8” diameter cutout. Lights feature a wider
mounting ange for easy installation and a
twist lock bezel. All glass, bee’s eye prism lens
provides maximum light dispersion.
• 10W-12V bulb
• 2.625” diameter
ITC 81290-CH
These lights feature a soft and powerful glow from the
entire 3” glass lens surface. Light has locking S/S spring
clips on the housing for added strength in the mounting.
Premium or watertight versions.
• Cool operating temperature
• Soft, powerful glow of light
• Frosted, slightly convex lens
• Twist lock glass installation
• No fasteners required for installation
• 3” or 4.5" dia. lights with a 2.2” cutout
ITC 81230-D
ITC 81230WR-D
ITC 81232-D
3" 10W premium
3" 10W watertight
4.5" 20W premium
Parts:
ANC 529362
ANC 529367
10W bulb
20W bulb
Chrome
Same as above but surface mounted
1" extension from surface.
ITC 81292-NI-D
ITC 81292-W-D
Nickel
White
Same as above but surface mounted with
On/Off rocker switch.
ITC 81295-NI-D
ITC Radiance Overhead Halogen Lights
20W bulb
Nickel
Parts:
ANC 529362
10W bulb
ITC Decor Overhead Halogen Light
Solid brushed brass construction, nickel nished. Features a
clear, prismatic convex lens and a highly polished re ector
for superior light output from the included bulb.
• Flush mount 2.75” diameter
• Cutout: 2.125"
• 12V-10W
• 0.83 amp draw
ITC 81929-NI-D
Parts:
ANC529362
Bulb
LIGHTING
The high intensity lamp provides uniform light
distribution and the 5" exible arm has a swivel head.
Comes complete with necessary hardware for quick,
easy installation on horizontal or vertical surfaces.
Rotary switch lamp head. Black nish.
27
28
Cabin Lights
ITC Overhead Halogen Lights
LIGHTING
Comprised of a series of solid brass rings, each features a
clear, prismatic convex lens and a highly polished re ector
for superior light output from the included bulb. The light
produces less head and twice the light output of conventional
halogens. Finished in brushed nickel or chrome.
• 3.5” diameter
• 12V-10W
• 0.83 amp draw
ITC 81926-NI-D
ITC 81926-CH
Nickel
Chrome
Parts:
ANC 529362
Bulb
ITC LED Cluster Overhead Lights
• Solid brass or brushed nickel ush mount
housing
• 18 'Warm white' LED cluster
• Ignition protected
• Very low amp draw
• Strong, steady light output
• High quality bee’s eye glass lens
• Dia: 2.75" x Cutout: 2.125"
ITC 69929-CH-D
ITC 69929-NI-D
Chromed
Brushed nickel
ITC LED Night Vision Lights
• Flush mount
• Stainless steel
• Pillow optic lens prevents glare
• Hidden fasteners
• Watertight
• Dia: 3" x Cutout: 2"
ITC 69650-SS-D
ITC 69670-SS-D
9 red & 9 white
9 blue & 9 white
ITC Round LED
Hardtop/Spreader Lights
• 18 'Cool white' LEDs
• Flush or surface mount
• Stainless steel or white nish
• Pillow optic lens prevents glare
• Watertight
• Dia: 3" x Cutout: 2"
ITC 69660-SS-D
ITC 69662-W-D
Flush mount, S/S
Surface/recess mount, white
ITC LED Cluster Courtesy Lights
• 9 bright white LEDs
(night light has 6 white & 6 blue)
• Stainless steel or white nish
• Surface or ush mount
• Directional light spread
• Pillow Optic lens prevents glare
• 12 volt, .1 amp draw
• Watertight
• Diameter: 3"
ITC 69600-SS-D
ITC 69620-SS-D
ITC 69602S-W-D
Flush mount, S/S
Flush mount, S/S, w/ blue night light
Surface mount, white
ITC LED Cluster Reading Lights
• 18 'Warm white' cluster
• Very low amp draw
• Strong, steady light output
• Mounting plate included
• High quality convex glass lens
• Solid brass chromed or brushed nickel housing
• Base dia: 2.75" x Light dia: 2.25" x D: 4.75
ITC 69922-CH
ITC 69922-CH-D
ITC 69922-NI-D
Chromed
Chromed "Warm"
Brushed nickel "Warm"
ITC Halogen Reading Lights
Brass reading lights (with a chromed or brushed nickel nish)
shine the halogen light through a convex frosted lens for a
powerful & directed light. The head
pivots & rotates and features a rotary
digital dimmer or on/off toggle switch
on the base. The lights are vented for heat
dispersion and have an escutcheon plate
that is optional for use during installation.
• 12V-10W halogen bulb. 0.83 amp draw
ITC 21922-CH-D
ITC 81922-NI-D
Chrome/Rotary switch
Brushed nickel/Toggle switch
Parts:
ANC 529362
Bulb
Cabin Lights
29
Hella Map Lights
Like the rest of the Radiance series of
reading lights, radiant light emits from the
bezel and cutouts. The head is directional
and both rotates and pivots for exibility.
The all metal housing includes a polished
re ector and bee’s eye lens for greater
light output
• 12V-10W incandescent bulb
• 0.83 amp draw
• On/Off toggle switch
Designed for the navigation station these powerful 12V-5W
halogen lights feature an additional red lens for easy eye adaptation
to surroundings. On/off switch is located in lamp head. Sturdy,
exible stalk allows light to be pointed in any direction.
ITC 81906-NI-D
Nickel
Parts:
SPE 906
Bulb
ITC Radiance Halogen Dimming Lights
This light radiates through the use of sculpted
cut-outs and a polycarbonate trim ring which
allows the light to glow from the head. Solid
brass construction with a brushed nickel
or chrome nish and colour coordinated
on/off rotary dimmer switch. Rectangular
shaped base with hidden fasteners. These
lights feature extremely cool operating
temperatures from the 12V-10W halogen
bulb. 0.83 amp draw.
ITC 21210-CH-D
ITC 21210-NI-D
Chrome
Nickel
Parts:
ANC 529362
Bulb
HLA 004532161
HLA 004532171
19" stalk length
7" stalk length
Parts:
HLA 128922011
HLA H8305000
SPE 64111
Red Lens
12V-6W Xenon bulb
12V bulb
Hella Interior/Exterior Light
Surface mounted interior lamp with
polycarbonate housing and rubber gasket.
Integral on/off switch. Mounting screws
included.
• Dia: 4-7/8" x H: 1-7/16"
HLA H26945011
Spare parts:
ANC 529104
Bulb
Hella Interior Light
Opening the shutter switches the lamp on and adjusts the light as
required. Housing and shutter are black impact-resistant plastic.
Bulb 10W-12V not included.
• L: 3-7/8" x W: 1-15/16" x D: 1-1/8"
HLA H26192031
Parts:
ANC 529104
12V bulb
ITC Directional Incandescent Reading Lights
This light is compact and allows for
mounting in areas where other lights
simply can’t be used. The lamp head
rotates to near 360° to allow for
directional illumination as well as
different light looks. Chrome or brushed
nickel nish. 12V-12W bulb. 1 amp
draw.
ITC 36704-CH/A-D
ITC 36704-NI/98-D
Chrome
Nickel
Parts:
SPE 168
Bulb
ITC Glass Shaded Nightlight
Reading Light
• Reading light with a night light feature
• Three way switch - light on, LED on &
all off
• Compact size with directional head
• Base dia: 3-1/2" x Lamp dia: 3" x H: 4" x D: 4"
ITC 69704-NI/98-D Nickel nish
Hella Fluorescent Lamp
• Contemporary design
• White housing
• Reverse polarity protection
• Vibration and shock resistant
• 12V-11W
HLA 007373062
13-7/8" x 2-5/16"
Parts:
HLA H83955021
12V bulb
Taylorbrite Lighting
Classic Fluorescent Lights
• Standard uorescent bulbs included
• Corrosion resistant aluminum housing and opaque
acrylic lenses
• Lights run on 12V DC power and only consume
16 to 30W of power
• Lights are UL approved and they will not interfere
with your boats on-board electronics
TAY EF16WW
16W, white light, 16” x 5.5” x 1”
TAY EF30WW
30W, white light, 22” x 6” x 1.5”
LIGHTING
ITC Radiance Incandescent Reading Light
30
Cabin Lights
•
•
•
•
LIGHTING
•
•
•
•
Available with a 'cool' or 'warm' light and as a tri-light (white, red, blue)
Chromed, powder coated white or nickel nish
Advanced optical system, 120° full angle-no LED dots
With SmartDriver technology, light output remains at 100% intensity
over entire operating voltage range
Stainless steel trim ring & spring clips
0 to 100% digital dimming (except for tri-lights)
Anodized aluminum housing, completely sealed
Side-emerging wires, 18 AWG
Apeiron Series Interior Lights
Part #
Light
Watts / Volts
Finish
SDi series
I2S AP-1L-SDI-11
Cool white light
1.5 watt / 6-30V
Chrome
I2S AP-1L-SDI-31
Cool white light
1.5 watt / 6-30V
Powder Coated
I2S AP-1L-SDI-41
Cool white light
1.5 watt / 6-30V
Nickel
SDi HB series
I2S AP-2HB-SDI-11
Warm white light
4 watt / 6-30V
Chrome
I2S AP-2HB-SDI-31
Warm white light
4 watt / 6-30V
Powder Coated
I2S AP-2HB-SDI-41
Warm white light
4 watt / 6-30V
Nickel
Protection Features:
• Reverse polarity
• Transient protection
• Internal resettable fuse
(HB series only)
SDi- Tri-Light series
I2S AP-174L-SDI-11
Tri-light
1.5 watt / 9-30V
Chrome
I2S AP-174L-SDI-31
Tri-light
1.5 watt / 9-30V
Powder Coated
I2S AP-174L-SDI-41
Tri-light
1.5 watt / 9-30V
Nickel
Pro le Series Interior Lights
Part #
Light
Watts / Volts
Finish
Pro le
I2S SML-2L-SDI-11
Warm white light
1.5 watt / 6-30V
Chrome
I2S SML-2L-SDI-31
Warm white light
1.5 watt / 6-30V
Powder Coated
I2S SML-2L-SDI-41
Warm white light
1.5 watt / 6-30V
Nickel
Pro le Tri-Light
I2S SML-174L-SDI-11
Tri-light
1.5 watt / 9-30V
Chrome
I2S SML-174L-SDI-31
Tri-light
1.5 watt / 9-30V
Powder Coated
I2S SML-174L-SDI-41
Tri-light
1.5 watt / 9-30V
Nickel
Pro le Touch Series Interior Lights
Light
Watts / Volts
Finish
I2S SMT-2L-SDI-11
Part #
Touch light
1.5 watt / 6-30V
Chrome
I2S SMT-2L-SDI-31
Touch light
1.5 watt / 6-30V
Powder Coated
I2S SMT-2L-SDI-41
Touch light
1.5 watt / 6-30V
Nickel
• Touch Dimming System: Network up
to 20 xtures, then use the touch light
to switch/dim the rest.
Cabin Lights
31
Ember Series Lights
Part #
Dimming Interface
Style
Finish
Dimensions
I2S EM-2L-65-13
Oval
Chrome
2.3" x 1.8"
I2S EM-2L-65-43
Oval
Nickel
2.3" x 1.8"
I2S EM-2L-65-11
Round
Chrome
1.8"
I2S EM-2L-65-41
Round
Nickel
1.8"
I2S EM-2L-65-12
Square
Chrome
1.8"
I2S EM-2L-65-42
Square
Nickel
1.8"
• Dimming control via a momentary switch or contact
• Small size, encapsulated
• Dim and Control select i2Systems and i2Systems
enabled products including:
• Apeiron Series (dim up to 18 lights per LL)
• Pro le Series (dim up to 18 lights per LL)
• V-Line Latitude Series (dim up to 20 feet per LL)
I2S LL-101
AC to DC Power Supplies
I2S PS12V12W-01
I2S PS24V25W-01
I2S PS24V40W-01
I2S PS24V80W-01
12 watt / 12 volt
25 watt / 24 volt
40 watt / 24 volt
80 watt / 24 volt
V-Line Series Lights
• SmartDriver technology inside every xture
• Retro t compatible
• Connects directly to 24V DC systems
• 4 watts per foot power use
• 50,000 hour operating life
• Produces even light, no LED dots or hot spots
• Advanced thermal technology means cool to the touch operation
• Anodized aluminum body with molded end caps
• Internal resettable fuse
V-Line Element Lights
• Light output remains continuous over the entire 22 to 26V DC range
• 8.5 watts per foot power usage
Part #
Length
Beam Angle
Light
Volts
I2S VL4-165-2
12"
65°
Warm white light
22-26V
I2S VL4-265-2
24"
65°
Warm white light
22-26V
I2S VL4-365-2
36"
65°
Warm white light
22-26V
I2S VL4-865-2
18"
65°
Warm white light
22-26V
V-Line Latitude HB Lights
• Light output remains continuous over the entire 8 to 30V DC range
• 4 watts per foot power use
• 'Warm' or 'Cool' White light options
Length
Beam Angle
Light
Volts
I2S VL3-145-2
Part #
12"
45°
Warm white light
18-30V
I2S VL3-245-2
24"
45°
Warm white light
18-30V
I2S VL3-445-1
48"
45°
Cool white light
18-30V
LIGHTING
• Warm white light
• Asymmetric beam pattern and wide lateral
beam distribution means no glare and maximum
coverage
• With SmartDriver technology, light output
remains at 100% intensity over entire operating
voltage range
• Stainless steel bezel & mounting clip
• 0 to 100% digital dimming
• Multiplex friendly
• Anodized aluminum housing, cool touch
operation
• 6" wire leads
• Depth: 3/4"
32
Cabin / Courtesy Lights
ITC Formed IllumaGrip Assist Handle
LIGHTING
• 20” long handle
• 304 Stainless steel end caps with 1.25” diameter solid acrylic
body with embedded re ective lines
• Exceeds 400 pound pull test
ITC 86433-SS/CL
ITC Straight IllumaGrip Assist Handle
ITC Oblong LED Courtesy Light
This oblong LED courtesy light features
a 'Cool white' LED in a stainless steel
trim ring & chrome plated re ector for an
elegant appearance.
• Draws a mere 0.04 amps
• Complete with mounting gaskets & screws
• Cutout: 1.25"
• 3" Wide x 1-1/2" High
ITC 69350-D
ITC Oblong Courtesy Light
• 18” long handle
• 304 Stainless steel end caps with 1.25” diameter solid acrylic
body with embedded re ective lines
ITC 86435-SS/CL18
ITC Button LED Courtesy Light
Versatile 'cool white' LED light ideal for many
applications. Optional mounting collar in
brushed nickel eliminates the need for a precise
cutout & adds beauty
• Extremely cool operating temperature
• Low pro le, watertight light
• No fasteners required, 1” cutout
• 0.04 amp draw
ITC 69503-W/ NI-D 2/pkg
• 316 Stainless steel trim ring
• Bee’s eye lens for spot type
illumination
• Chrome re ector improves light output
• Includes mounting gaskets & screws
• 4.2W incandescent bulb
• 3”x1.5” with a 1.25” cutout
ITC 80450-SS-D
Parts:
SPE 168
AquaSignal Compact Courtesy Light
Suitable for step lighting, interior or exterior
courtesy lighting, etc. Long lasting. Low
mounting depth.
• Sold in pairs
• L: 2-11/16" x W: 1-5/16" x D:15/16"
AQS 16150-7
ITC LED Baitwell Courtesy Light
• 'Cool white' LED, clear lens
• Internal mounting mechanism
allows light to be directed straight
ahead or at 15 degree angle
• Chrome plated housing & re ector
• Ignition protected LED technology
• Through hull mounted, sealed, watertight lens
• Width: 1.25" x H: 1" x Cutout: 3/4"
ITC 69300-W-D
2/pkg
ITC Oval Courtesy Light
Flush mount light with clear internally textured
polycarbonate lens
• Chrome re ector improves light output
• Includes mounting gasket & screws
• Fully assembled for quick installation
• 12V-4.2W incandescent bulb
• 1.5” cutout
ITC 80495-D
Parts:
SPE 168
Bulb
Bulb
Black 12V-8W
Innovative Lighting
LED Courtesy Lights
4-LED courtesy surface mount lights.
• Rated @ 100,000 hours of service life
• Shock and vibration proof
• Cool to the touch
• Energy draw only 65 milliamperes
• 1.57" L x .57" W x .82" H
INO 004-4000-7
INO 004-4100-7
INO 004-5000-7
INO 004-5100-7
Red LED, Black cover
Red LED, White cover
White LED, Black cover
White LED, White cover
Innovative Lighting LED Bulkhead Light
INO 011-5500-7
Perko Underwater Light
• Polished bronze with plain bronze
mounting ring
• 10' of 16/2 electrical cable
• Safety seal design prevents water
intrusion in the event of glass
breakage
• Terminal for bonding wire
• Two bulb options (included)- 25° beam bulb (3000 CB candle
power) and 40° beam bulb (1700 CB candle power)
PER 174-DP3-PLB
Innovative Lighting
White LED Step Lights
3-LED step surface mount lights.
• Rated @ 100,000 hours of service life
• Energy draw just 30 milliamperes
• 1.71" L x .65" W x .40" H
INO 003-5000-7
INO 003-5100-7
Black cover
White cover
Parts:
PER 77-DP1-12V
PER 77-DP2-12V
12V, 50W 25° bulb
12V, 50W 40° bulb
T-H Marine Livewell Courtesy Light
This rugged light is totally waterproof and virtually
indestructible. This unit is great for underwater
mounting in a livewell or for mounting in any other
potentially wet area. Unit is molded of clear acrylic.
The bulb and socket pops in from behind. 3W
THM LWL-1-DP
Perko Surface Mounted Utility Lights
Parts:
SPE 194
Complete with 12V-1W bulb
• Diffused plastic light cover
• 1-7/8" x 9/16"
TH Marine Courtesy Lights
PER 140-DP-NYN
• Complete with 12V-1W bulb
• Shielded plastic light cover
• 1-7/8" x 9/16"
This ush mount courtesy light features a moulded poly housing
that is weather resistant. Re ector directs light downward.
• Uses a wedge base bulb #184
• Requires a 2-1/8" hole for mounting
• 2-3/4" x 2-3/4"
THM CL-l-DP
THM CL-2-DP
PER 137-DP-BLK
Spare bulb
Black housing
White housing
Perko Utility Lights
• Molded black plastic
• Complete with 12V-3W bulb
• Easily installed by cutting a 1-3/4"
diameter hole
• Spade connector
• 2-1/4" x 2-1/4" x D: 15/16"
Cole Hersee Dash Lamp
• Bright chrome plated brass hood with a
wide angle aperture
• Flange mounted
• Uses a DC bayonet bulb (not included)
• Two screw terminals
• Integral on - off switch
PER 1044-DP1-BLK
PER 1044-DP1-WHT
Black
White
C/H M-451
Parts:
PER 1044-DP-99A
Spare bulb, 2pk
Parts:
ANC 520068
Perko Utility Light
• Adjustable shield
• Complete with 12V, 7W bulb
• Dia: 2-5/8" x Neck length: 3/4"
PER 1254-DP-CHR
Light
Parts:
SPE 90
Spare bulb
8W bulb, 2/pkg
LIGHTING
• Rated @ 100,000 hours
• Corrosion resistant
• Rated for underwater use
• 2 White LED
• Requires 11/16” (.687) Hole
33
34
Davis "Mega-Light" Utility Lamp
LIGHTING
• Comes with an easy hang bracket for quick
attachment on your vessel
• Draws less than 1/10th amp
• Automatically switches on at dusk and
switches off at dawn
• Light height: 3"
• Includes 2 bulbs (1892 & 1893)
• 15' cord with a fused lighter plug
• Comes with spare fuse
DIN 3310
Parts:
DIN 3330
Replacement bulbs - 1 each of
1892 14.4V 0.12A 1000 hrs
1893 14V 0.33A 7500 hrs
Ramco 12 Volt Oval Courtesy Lights
Semi recessed design with
attractive styling.
• 4" x 2-3/8"
RAM 24077-64R
RAM 24077-71R
Injection Molded Polycarbonate. Light is
secured by screwing mounting ring from the
back to the surface. Features a low pro le and
12" leads. Includes water resistant gasket and integral molded lens
allowing it to be used as a livewell light etc.
• Dia: 2-3/8" x D: 1-13/16"
SED 401510-1
SED 401515-1
Flush w/ back nut
Flush w/ screws
Sea-Dog Utility Lights
• Injection molded delrin
• Uses #6 F.H. woodscrews
• 12V-3W bulb
• H: 2-1/4" x D: 13/16"
SED 401310-1
SED 401311-1
Black
White
Sea-Dog Chrome Utility Lights
• Chrome plated brass
• Rated 12V-3W
• Includes fasteners
• H: 1-3/16" x W: 2-1/2" x D: 15/16"
White
Black
Ramco 12 Volt Tac-Lite Strip Lighting
Bulbs are placed in 3" intervals and wires are completely sealed
in a clear PVC tube that has a 3/8" ange for stapling or tacking.
The long-life, low amp bulbs (.004 amps per bulb) save energy. UL
listed. Bulbs are wired in parallel so that the string remains lit if
one or more bulbs burn out.
Part #
Sea-Dog Utility Lights
Length
# of Bulbs
RAM 33-24-07
24"
7
RAM 33-36-11
36"
11
RAM 33-72-23
72"
23
RAM 33-120-40
120"
39
RAM 33-180-59
180"
59
Ramco Waterproof Courtesy/Utility Lights
A completely waterproof light constructed of clear, impactresistant plastic and neoprene. Ideal for every damp or wet area that
requires courtesy lighting. Suitable for underwater applications.
Light diameter: 2". Requires a 1" mounting hole. Maximum wall
thickness for thru-hull model: 3/4". Surface mount model uses three
#6 fasteners (not included) for mounting.
• 2 CP, 12V bulb included.
RAM 24074R
RAM 24074SP-R
Thru-hull model
Surface mount model
Parts:
SPE 194
12V bulb
SED 401151-1
SED 401152-1
White lens
Red lens
Sea-Dog LED Utility Light
• Clear plastic amber LED utility light
• H: 7/8" x W: 1-3/4" x D: 5/8"
SED 401410-1
Sea-Dog LED Courtesy Lights
LED courtesy lights have 9 white
LED’s in each light and are rated
at 12V. Low amp draw. Plastic
construction.
• Diameter: 3-1/8"
• Cutout: 2"
SED 401625-1
SED 401627-1
Chrome
White
Sea-Dog LED Underwater / Overhead Light
• 1 super bright LED per light
• 12 volt
• 3-3/16" dia x 15/16"
• Use #8 FH
SED 406100-1
35
Courtesy / Floodlights
ITT/Jabsco Ray-Line Flush Mount Floodlights
Slim design and LED light
output make this ush mounted
lamp suitable for reading lamps,
steps or general indoor lighting.
Consists of 10 white LED'S in an impact
resistant plastic housing. 12V-2W.
Expand your boating hours with the convenience these oodlights
bring to night-time cruising, shing, or working. Available in two
different light beam patterns to match your requirements. Flood
pattern for transom mount or trapezoidal beam for bulkhead
mount to light up the deck. Light angle is easily adjusted up to 7o
horizontally and 12o vertically to custom
t to any transom or bulkhead. Heavy
duty corrosion resistant materials.
Smooth ush mount design. Sealed
beam halogen 50W-12V-3.8 amps.
Part #
Mounting Centre
LxWxD
HLA 959073001
9-3/8"
10-1/2" x 1-3/8" x 1-3/8"
Hella Marine Oval LED Courtesy Light
Suitable for step lighting, interior or exterior courtesy lighting, etc.
Long lasting. Computer designed optics provide a uniform light
output. Low mounting depth. Water and shock proof. Pre-wired
with patented cable sealing.
100,000 hr. service life.
Lifetime guarantee.
• H: 1-1/8" x W: 3-1/4" x L: 7/8"
HLA 959510851
White light
Parts:
HLA H94685007
S/S bezel
Hella Marine Round LED Courtesy Lights
This ush mount LED light is ideal for interior
and exterior use. Long lasting. Durable black
acrylic housing. Water and shock proof. Prewired with patented cable sealing. 100,000 hr.
service life. Lifetime guarantee.
• Diameter: 3"
HLA 980500041
HLA 980500051
White
Black
Barnegat Courtesy Lights
A low pro le, ush mounting light. It is watertight and
noncorrosive, making it suitable for any application including
underwater installations. The white housing has a wide caulking
ange. Bulb included.
• 4" diameter ange x 1-7/8" deep
• 2-3/4" dia cutout hole
BLP QL-CL-C
BLP QL-CL-F-12
BLP QL-CL-F-24
Clear lens, 12V
Frosted lens, 12V
Frosted lens, 24V
Parts:
SPE 211-2
12V bulb
ITT 45960-0001
ITT 45960-0000
Flood
Trapezoidal
Parts:
ITT 18753-0351
12V Flood (bulb)
J W Speaker Flood/Spotlights
Shock and vibration resistant, weatherproof lamps feature a onepiece rectangular white housing, impact resistant polycarbonate
lens and plated universal mounting bracket
with 5/16"" mounting bolt. Two sizes to
choose from.
JWS 0531915
JWS 0531935
JWS 1229845
JWS 1229855
3" x 5"
3" x 5"
4" x 6"
4" x 6"
Parts:
JWS 4830835
JWS 4929401
3" x 5" replacement bulb
4" x 6" replacement bulb
ITT/Jabsco
Rayline Halogen Floodlights
A unique trapezoidal light beam from
a specially designed lens provides
excellent and even oodlight coverage.
9900 CP 450 hour average bulb life.
Totally waterproof.
• Dimensions: 4" x 6"
Part #
Compact, white cockpit light used to brighten deck areas or provide
accent lighting in cabin areas. The waterproof housing is made of
polycarbonate, and is unaffected by moisture
or sunlight. Frosted lens eliminates glare and
provides a soft white light.
• W: 3-1/4" x H: 1-3/4" x D: 1-1/2"
BLP QL-CPW
Parts:
SPE 563
Spare bulb
VoIts
Bulb
Watts
Amps
ITT 45900-0000
12
ITT 45903-0000
50
4
ITT 45900-0001
24
ITT 45903-0001
70
3
Watts
Amps
50
4
• Dimensions: 3" x 5"
Part #
ITT 45900-1000
Barnegat Cockpit Light
Spotlight
Floodlight
Floodlight
Spotlight
VoIts
12
Bulb
ITT 45903-0002
LIGHTING
Hella LED Accessory Lamp
36
Flood / Spreader Lights
BEP Deck Lamps
Perko Spreader Light
LIGHTING
Free form lens re ector technology.
Puts the optics in the re ector,
allowing for 30% more light
output than conventional lamps.
All hardware is chrome plated, 316
stainless steel. Sealed cable system insures a watertight lamp. UV
stabilized, impact resistant plastic housing. Includes a 12V, 55W
halogen H3 bulb. W: 5-1/2 x H: 3-1/4" x D: 3-1/4".
BEP ML005BW/ DSP
BEP ML005WW/ DSP
Black
White
Parts:
OPT A-700
12V 55W Halogen bulb
Sea-Dog Halogen Floodlight
Injection molded breglass nylon
w/ stamped 304 stainless bracket. This marine
grade ood light has a solid glass lens, a
stainless steel mounting bracket and a 55W
halogen bulb.
• Chrome plated bronze
• Fixed mount
• 12V, 6CP #70-0 bulb
• Diameter: 2-3/4" x Depth: 1-3/8"
PER 265-DP-CHR
Light
Parts:
PER 70-DP0-CLR
Spare bulb (2/pkg)
Perko Spreader Light
• Adjustable
• Molded black plastic body
• 4-1/2" sealed beam bulb 12V x 35W
• Diameter: 4-1/2" x D: 4-1/2"
• Mounting bracket 4-1/2" x 1"
PER 1040-DP1-12V
Light
Parts:
GEL 4411
12V bulb
Optronics Utility Floodlight
SED 405110
Floodlight
Parts:
SED 405111-1
12V 55W bulb
Hella Halogen Floodlights
Floodlights for illumination of deck and superstructure. Uniform
light distribution. Seawater-proof, attractive
design with extending rim to protect lens.
12V/55W halogen bulb.
Set in a rugged weatherproof rubber housing, these utility ood
lights are excellent for night-time loading and
launching of your boat or wherever you need a
durable light source. 12V. Mounting hardware
is stainless steel.
• Clam pack displayed
OPT TL-10SS
Parts:
GEL 4411
12V bulb
Sea-Dog Spreader Light
• Stamped 304 stainless steel construction
• Pre-wired 12V, 35W sealed beam bulb
Exterior mount swivels vertically
• W: 6-7/8" x H: 4" x D: 5-1/2"
HLA 007118051
HLA 007118057
HLA 007118011
HLA 007118097
Exterior mount, White
Exterior mount, White (bulk)
Exterior mount, Black
Exterior mount, Black (bulk)
Flush mount
W: 6-7/8" x H: 1-3/4 x D: 3-11/16"
HLA 998518001
Flush mount, White
Spare Parts:
HLA H83135211
OPT A-700
SED 405210-3
Parts:
GEL 4411
12V-35W bulb
Sea-Dog Spreader Light
• Stainless steel xed light
• 3000 CP sealed beam, 12V-35W bulb
Perko Adjustable Spreader Light
• Chrome plated brass
• 4-1/2" sealed beam bulb 12V-35W
• Diameter: 4-5/8" x D: 2-1/2"
• Mounting bracket: 5-3/8" x 3/4"
PER 280-DP1-12V
Parts:
GEL 4411
Spare 12V bulb
SED 405220-3
Parts:
GEL 4411
12V bulb
Flood / Spreader Lights
Spectro 500 Watt Halogen Light
Barnegat Halogen Docking Flood Lights
Manufactured in corrosion proof materials, this light
uses a 12V ood lamp to generate a 70° wide and 30°
high spread of light. Bulbs swivel for
adjustment and can be replaced from
inside or outside of the boat.
• Sold as a pair
BLP QL-60-H7614
Parts:
GEL H7614
Par 36 bulb
Innovative Lighting Docking Lights
SPE HFE-JO500F
Bulbs:
SPE Q150T3/CL12V
SPE Q300T3/CL24V
SPE Q300T3/CL32V
SPE Q500T3/CL
150W-12VDC
300W-24VDC
300W-32VDC
500W-120VDC
Hella Deck Lamp
Die cast aluminum housing with
polyester powder coat. Tempered glass
& stainless steel hardware.
• Colour: white
• Lens size: 8-1/8 x 5-7/8"
• 316 Stainless steel
• 12V-50W halogen lamp draws 4 amps
• Sealed built-in rear heat sink with thermal
insulated wires
• Removable screw On/Off Pyrex
optical lens in a spring loaded
assembly
• Water tight gaskets included
• 7.57” L x 4.32” W x 4.89” D
INO 580-0200-7
Pair
Parts:
INO 580-9904-1
12V-50W halogen bulb
HLA H16980001
Light
ITC Halogen Docking/Floodlight
Order bulbs separately:
SPE Q150T3/CL12V
SPE Q300T3/CL24V
SPE Q300T3/CL32V
SPE Q500T3/CL
150W-12VDC
300W-24VDC
300W-32VDC
500W-120VDC
This light in gelcoat white has a compact & stylish design and
features a stainless steel re ector, a fully sealed lens, body and
re ector. Adjustable both horizontally and vertically, this ood
light has a reinforced mounting system for greater strength and
includes a 35W halogen bulb. Light ships with stainless steel
fasteners.
Optronic Docking Light Kits
Includes two Quartz Halogen 55W lights,
stainless mounting bracket with rubber boots,
safety-fused wiring harness and lighted switch.
OPT DL16CC
OPT DL16WC
Black
White
Parts:
OPT A-700
Spare 12 volt bulb
ITC 81380-GW
AquaSignal Watertight Searchlight
Barnegat MHL Mini Hull Halogen Lights
Manufactured in a UV stabilized polycarbonate, this light generates
42,000 candlepower of light from its 55W halogen bulb, spreading
light in a 21° horizontal beam. Easy bulb replacement from inside
or outside of the boat.
• 4.3 amp draw
• 12V
BLP QL-MHL
Pair
Parts:
BLP 8012-105-108
12V bulb
This light is the only SOLAS approved searchlight in
the world. Can be used inside and outside
the boat. Housing is black elastic rubber
and is shock-resistant, non-corrosive and
non-magnetic. 10' pigtail cable. Built-in
sealed beam. Protection IP 68.
AQS 80600-7
Accessories:
• Bremen deck mount bracket
• All stainless construction
AQS 80902-1
Parts:
GEL H7614
12.8V, 50 watt replacement bulb
LIGHTING
• This rugged quartz halogen oodlight provides a broad
asymmetric beam for high quality area lighting with good
colour rendering. Ideal for high powered deck lighting.
Seamless die cast aluminum. Fully sealed to ensure against
typical water leaks. Finish is black powder
coat paint. All external screws/bolts are
stainless steel.
• 500W QTZ. Lamp: 120V. CSA approved
(included)
• Weight: 4.63 lbs
• W: 8.7" x D: 4" x H: 12.7"
37
38
Flood Lights / Flashlights
LIGHTING
RAB Floodlights
Scepter Light Fixtures
Par 38 spot and oodlight holders. Full cast cup HR series.
Sturdy, precision construction ensures lasting reliability. A
sealing gasket at the lamp base weatherproofs
the unit. Universal swivel with 1/2" pipe
thread. Porcelain heat proof socket.
Scepter’s non-metallic light xtures simply will not
rust. Exposure to moisture, ammonia, salts and other
corrosive agents cannot degrade Scepter’s ultra-violet
resistant material. All gaskets are constructed of high
temperature silicone rubber and all screws are brass.
Manufactured from a glass reinforced thermoplastic
polyester resin, Scepter’s ame retardant xtures have
an operating temperature range (from - 40°C to +
150°C) glass globe. Unit comes complete with ceiling
mount xture, clear globe and guard.
• Dia: 4-3/4” x Height: 10”
RAB HR
RAB HRB
Silver grey nish
Black epoxy coating
Parts:
AIF 75PAR38-12V
12V-75W bulb
VPF-150-C
RAB Floodlight
SCP VPF-150C
Floodlight holder, 150 watts max. is die cast aluminum with a
baked enamel nish and a molded high temperature silicone front
seal. 3/4" long arm with 1/2" pipe thread.
Porcelain socket.
Parts:
WB-150
SCP WB-150
90° Wall bracket
SCP VPB-150
Ceiling mounting box
SCP SBA-150
Socket base w/ globe basket
SCP VPG-150
Fixture guard only
SCP SOC-150
Replacement socket
** A complete wall mount xture can be assembled
combining the WB-150, SBA-150 and VPG-150.
RAB LFP-38B
Parts:
AIF 75PAR38-12V
12V-75W bulb
Ceiling mount xture complete
Rayovac Industrial Flashlight
RAB Junction Box
This small tool box size ashlight is made from
polypropylene to help with impact and chemicals.
• Comes with hanging ring
• Yellow in colour
• Krypton bulb
• Uses 2 'AA' batteries (included)
• Length: 5-1/2"
• Lifetime warranty
Die cast 4" round box. May be wall, ceiling
or pole mounted to hold up to ve lamp
holders. Boxes are tapped 1/2" on back and
four sides. Three plugs provided. Complete
with stamped cover.
RAB 1/2 VXJ
RAY I2AA-B
Flashlight
FOX 40 Floating Flashlight
VAS-1
VBS-1
VAKS-1
GL globes
RAB Vapour Proof Fixtures
GD100/CGS
Approved for use in locations requiring protection for
the electric lamp, socket and wiring from rain, fumes,
non-combustible dusts, non-explosive vapours and
gases, as well as from physical abuse or vandalism.
RAB VAKS-1
RAB VAS-1
RAB VBS-1
Fitter w/ junction box, 100W
Fitter only, 100W
Wall bracket tter only, 100W
Vapour proof glass globes are made of crystal lime glass.
RAB GL 100
RAB GL 100/G
RAB GL 100/R
RAB GL 100/PG
RAB GD100/CGS
RAB GAX-C1
RAB GAX-VP100
RAB R-9878-VA
RAB R-10035-GTF
RAB R10FL
Clear glass globe
Green glass globe
Ruby glass globe
Clear polycarbonate globe
Cast aluminum, screw-on guard
Fitter box gasket
Globe gasket
Socket
Socket
1/2" Fitter plug
Water resistant, compact oating ashlight
has a high-intensity Krypton bulb and a
shock-resistant casing with nonslip grip.
Bright yellow colour makes it easy to spot even in the water.
• Length: 6-1/4"
• Uses 2 'AA' batteries (included)
FOX 9504
39
Flashlights / Sockets
Optronics Headlamp
Uses 2 'AA' size batteries (not included).
Perfect for all indoor and outdoor activities.
Rugged reinforced housing and adjustable
straps adapt to any situation. This
waterproof krypton headlamp uses four
"AA" batteries (not included) and has a nylon adjustable
headband.
OPT HL-6000
SCO 795
Parts:
SPE PR2
Replacement bulb
Rayovac Industrial Flashlight
This industrial grade ashlight is certi ed for use in hazardous
locations by U.L. and M.S.H.A. Internal safety breaker instantly
stops contact between batteries and broken bulb.
• Comes with hanger ring
• Yellow in colour
• Uses 2 'D' batteries (not included)
• Length: 7-1/4"
RAY I2-D BULK
Flashlight
Parts:
RAY K2-2
2.4V-1.68W bulb (2/pkg)
Rayovac Floating Lantern
This economically priced 6V lantern oats
with beam upward. It has a long range,
full, even beam. Watertight and weather
resistant.
• Uses a 6V spring terminal battery
(included)
RAY EVBFL6V-B
Flashlight
Parts:
RAY K13-2
RAY 941
4.8V-3.6W, bulbs (2/pkg)
6V, Spring terminal battery
The nickel-plated brass base halogen lamp adaptor
allows the use of halogen lamps in standard double
contact base. 1 Per pack.
Part #
Bulb Style
Base
ANC 529381
AH
Double Contact Bayonet
► Also See:
Halogen Lights pg 47
Perko Replacement Lamp Sockets
Double contact bayonet sockets:
Delrin body - brass spring. 3/4" OD
PER 24-DP1
10" Pigtail
PER 24-DP2
60" Pigtail
24-1
276-2
276-002
Brass body. Tapped 1/8" IPS.
• 2" overall height
PER 276-002
Brass, with 6" wire leads.
Rayovac Lantern
52-DP
PER 52-DP
The new 4D Sportsman Lantern is the latest in
high-quality products from Rayovac for outdoor
use. It is designed to last a lifetime.
• Bright krypton bulb
• Floats
• Weather resistant
RAY SP4D-KB
Parts:
RAY K13-2
Ancor Halogen Lamp Adaptor Base
Single contact bayonet:
Brass with 6" pigtail leads.
• 3/8" L x 3/8" O.D
PER 1109-DP
Cole Hersee Lamp Socket
4.8V-3.6W, bulbs (2/pkg)
Nickel plated brass housing. Wire connections
at end of insulator. Fits into 11/16" hole.
C/H M-432
1109
LIGHTING
Scotty Watertight Flashlight
40
Double Contact Bayonet Base Bulbs
Nomograph
LIGHTING
The scales show the relationship between voltage, current, candlepower, and life. Variations in one
of these parameters in application will generate a change in the others as depicted by the scales. For
example: Operating a 5 volt lamp at 6 volt (1.20) will cause corresponding increase in current and
candlepower of 10% and 90% respectively with an 88% loss of lamp life.
This selection of bulbs will service most needs in the marine industry.
Amperes A measure of electrical current. In incandescent lamps, the current is related to voltage and power as follows: Current (Amps) =
Power (Watts) / Voltage (Volts).
Candela (cd) The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of
lighting when a standard candle of a xed size and composition was de ned as producing one candela in every direction. A plot of
intensity versus direction is called a candela distribution curve and is often provided for re ectorized lamps and for luminaires with a lamp
operating in them.
Candlepower An obsolete term for luminous intensity; current practice is to refer to this simply as candelas.
Footcandle (fc) A unit of illuminance or light falling onto a surface. It stands for the light level on a surface one foot from a standard
candle. One footcandle is equal to one lumen per square foot.
Lumen A measure of the luminous ux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens.
A 60-watt Soft White incandescent lamp provides about 840 lumens.
Lux (lx) A unit of illuminance or light falling onto a surface. One lux is equal to one lumen per square meter. Ten lux approximately
equals one footcandle.
Rated Lamp Life For most lamp types, rated lamp life is the length of time of a statistically large sample between rst use and the
point when 50% of the lamps have died. It is possible to de ne “useful life” of a lamp based on practical considerations involving lumen
depreciation and colour shift.
Voltage A measurement of the electromotive force in an electrical circuit or the device expressed in volts. Voltage can be thought of as
being analogous to the pressure in a waterline.
Watt A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy.
Double Contact Bayonet Base Bulbs
41
Double Contact (RP-11) 1-3/8" Diameter Bayonet Base (BA15d)
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
SPE 1144
Part #
-
12.5
1.98A
32
1-1/4"
2-1/4"
400
1
SPE 1054
-
32
.74A
32
1-1/4"
2-1/4"
100
1
Part #
SED 441004-1
Trade #
Volts
Amp/Watt
1004
12.8
12W
15
3/4”
N/A
2
-
12.8
.94A
15
1-1/16"
200
1
SPE 1004
CP
L.C.L.
Rated Hrs
Per Card
Double Contact (G-6) 3/4" Diameter Bayonet Base (BA15d)
Part #
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 520068
68
13.5
8.0W
4
13/16"
1-7/16"
5000
2
ANC 520090
90
13.0
7.5W
6
3/4"
1-7/16"
750
2
SED 441082-1
82
6.5
6.6W
6
3/4"
1-7/16"
500
2
SED 441090-1
90
13.0
7.5W
6
3/4"
1-7/16"
500
2
SPE 64
-
7.0
.63A
3
3/4"
1-7/16"
1000
1
SPE 68
-
13.5
.5A
4
13/16"
1-7/16"
5000
1
SPE 82
-
6.5
1.02A
6
3/4"
1-7/16"
500
1
SPE 90
-
13
.58A
6
3/4"
1-7/16"
750
1
SPE 304
-
28
.30A
6
3/4"
1-7/16"
500
1
SPE 624
-
28.0
.37A
6
3/4"
1-7/16"
1000
1
SPE 1224
-
32
.16A
3.8
11/16"
1-7/16"
275
1
SPE 1252
-
28
.23A
3
3/4"
1-7/16"
2000
1
Double Contact (S-8) 1" Diameter Bayonet Base Dual Filament (BA15d)
Part #
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 521176
1176
12.8/14
17.2W
21/6
1-1/4"
2"
300/1500
2
Double Contact (S-8) 1" Diameter Indexing Base Dual Filament (BAY15d)
Part #
Trade #
Volts
Amp
CP
L.O.L.
M.O.L
Rated Hrs
Per Card
ANC 521034
1034
12.8/14
1.8/.59
32/3
1-1/4"
2”
200/5000
2
ANC 521157
1157
12.8/14
2.1/.59
27/8
1-1/4"
2”
1200/5000
2
SED 441034-1
1034
12.8/14
1.8/.59
32/3
1-1/4"
2"
200/5000
2
SED 441157-1
1157
12.8/14
2.1/.59
32/3
1-1/4"
2"
N/A
2
SPE 1157
-
12.8/14
2.1/.59
3
1-1/4"
2"
1200
1
SPE 2057
-
12.8/14
1.8/.48
32
1-1/4"
2"
1200
1
LIGHTING
Double Contact (B-6) 3/4" Dia. Bayonet Base (BA15d)
42
Single Contact Bayonet Base
Double Contact (S-8) 1" Diameter Bayonet Base (BA15d)
Part #
Trade #
Volts
Amp/Watt
CP
L.O.L.
M.O.L.
Rated Hrs
Per Card
ANC 520094
94
12.8
13.3W
15
1-1/8”
2”
700
2
ANC 521076
1076
12.8
23.0W
32
1-1/4”
2”
200
2
LIGHTING
ANC 521142
1142
12.8
18.4W
21
1-1/4"
2"
1000
2
ANC 521140
1142-R
12.8
18.4W
21
1-1/4"
2"
1000
2
ANC 521228
1228
32
.45/15.3
15
1-1/4"
2"
N/A
2
SED 441076-1
1076
12.8
23W
32
1-1/4”
2”
200
2
SED 441094-1
94
12.8
13.3W
15
1-1/8”
2”
700
2
SED 441142-1
1142
12.8
18.4W
21
1-1/4”
2”
1000
2
SED 441143-1
1142R
12.8
18.4W
21
1-1/4”
2”
1000
2
SPE 94
-
12.8
1.04A
15
1-1/8"
2"
700
1
SPE 306
-
28
.51A
15
1-1/8"
2"
300
1
SPE 308
-
28
.67A
21
1-1/8"
2"
300
1
SPE 1076
-
12.8
1.80A
32
1-1/4"
2"
200
1
SPE 1142
-
12.8
1.44A
21
1-1/4"
2"
1000
1
SPE 1204
-
28
.71A
21
1-1/4"
2"
400
1
SPE 1228
-
34
.45A
15
1-1/8"
2"
150
1
Navigation Double Contact Bayonet Bulbs
Part #
Volts
Amps
CP
Watts
Dia. x L
Rated Hrs
ANC 529300
12
2.5
26
30
1.0” x 2.65”
1200
ANC 529301
24
1.25
26
30
1.0” x 2.65”
1200
ANC 529302
32
.94
26
30
1.0” x 2.65”
1200
ANC 529303
120
.25
20
30
1.0” x 2.65”
1200
Navigation Double Contact Indexing Bayonet Bulbs
Volts
Amps
CP
Watts
Rated Hrs
ANC 529340
Part #
12
2.08
24
25
1200
ANC 529341
24
1.04
25
24
1200
ANC 529342
32
.78
25
25
1200
ANC 529343
12
.83
12
10
1200
ANC 529344
24
.42
12
10
1200
Navigation Double Contact
Indexing Bayonet Bulb
Part #
PER 375-32V-10W
Navigation Medium Prefocus Bulb
Volts
Watts
Dia. x L
32
10
1-3/8" x 2-1/4"
Part #
PER 342-RS4-CLR
Volts
Watts
Dia. x L
120
60
1-1/2" x 4-1/2"
Single Contact Bayonet Base
43
Single Contact (G-6) 3/4" Diameter Bayonet Base (BA15s)
Part #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
97
13.5
.69A
4
13/16"
1-7/16"
5000
2
SED 441067-1
67
13.5
.59A
4
13/16"
1-7/16"
5000
2
SPE 67
67
13.5
.59A
4
13/16"
1-7/16
5000
1
SPE 89
89
13
.58A
6
3/4"
1-7/16"
750
1
SPE 97
97
13.5
.69A
4
13/16"
1-7/16"
5000
1
1223
34
.16A
3.8
3/4"
1-7/16"
275
1
SPE 1223
LIGHTING
Trade #
ANC 520097
Single Contact (B-6) 3/4" Diameter Bayonet Base (BA15s)
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 521003
Part #
1003
12.8
.94A
15
1-1/16"
1-3/4"
100
2
SED 441003-1
1003
12.8
.94A
15
1-1/16"
1-3/4"
100
1
SPE 1003
1003
12.8
.94A
15
1-1/16"
1-3/4"
100
1
Single Contact (S-8) 1" Diameter Bayonet Base (BA15s)
Part #
Trade #
Volts
Amps
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 520093
93
12.8
1.04A
15
1-1/8"
2"
700
2
ANC 521141
1141
12.8
1.44A
21
1-1/4"
2"
500
2
ANC 521156
1156
12.8
2.10
32
1-1/8"
2"
1200
2
SED 441093-1
93
12.8
1.04A
15
1-1/8"
2"
700
2
SED 441141-1
1141
12.8
1.44A
21
1-1/4"
2"
500
2
SED 441156-1
1156
12.8
2.10A
32
1-1/4"
2"
200
2
SPE 93
93
12.8
1.04A
15
1-1/8"
2"
700
1
SPE 305
305
28
.51A
15
1-1/8"
2"
300
1
SPE 307
307
28
.67A
21
1-1/8"
2"
300
1
SPE 1073
1073
12.8
1.80A
32
1-14"
2"
200
1
SPE 1141
1141
12.8
1.44A
21
1-1/4"
2"
500
1
SPE 1156
1156
12.8
2.10A
32
1-1/4"
2"
200
1
SPE 1203
1203
28
.71A
21
1-1/4"
2"
400
1
Single Contact (R-12) 1-1/2" Diameter Bayonet Base (BA15s)
Part #
Trade #
Volts
Amp/Watt
CP
Dia. x L
Rated Hrs.
Per Card
ANC 521383
1383
13
20W
300
1-1/2” x 2-5/8”
300
1
44
Single Contact Flange Base / Miniature Bulbs
Single Contact (T-1-3/4) 7/32" Diameter Midget Flanged Base (F6)
Part #
Use
Volts
Amp/Watt
CP
Dia. x L
Rated Hrs
Per Card
SPE 382
Indicator
14
.08A
.3
S.C. .230 x .625
40000
1
LIGHTING
Miniature Screw Base (G-3-1/2) 7/16" Diameter (E10)
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
SPE 13
Part #
3.7
.30A
.98
23/32"
15/16"
15
1
SPE 52
14.4
.10A
.75
N/A
15/16"
1000
1
SPE 131
1.3
.10A
.03
23/32"
15/16"
50
1
SPE 365
3.69
.50A
1.60
23/32"
15/16"
15
1
Miniature Screw Base (TL-3) 3/8" Diameter (E10)
Part #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
SPE 222
2.25
.25A
-
-
.93"
5
1
Miniature Screw Base (T-3-1/4) 13/32" Diameter (E10)
Part #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
SPE 48
2
.06A
.04
-
1-3/16"
1000
1
Miniature Screw Base (G-4-1/2) 9/16" Diameter (E10)
Part #
SPE 407
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
4.9
.30A
1.2
13/16"
1-1/16"
50
1
SPE 425
5.0
.50A
25
23/32"
1-1/16"
15
1
SPE 605
6.15
.50A
3.4
23/32"
1-1/16"
15
1
Miniature Bulbs
45
Miniature (G-3-1/2) 7/16" Diameter Bayonet Base (BA9s)
Part #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 520053
53
14.4
.12A
1
1/2"
15/16"
1000
2
SED 441053-1
53
14.4
.12A
1
1/2"
15/16"
1000
2
SPE 53
53
14.4
.12A
1
1/2"
15/16"
1000
1
LIGHTING
Trade #
Miniature (G-4-1/2) 9/16" Diameter Bayonet Base (BA9s)
Part #
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 520057
57
14.0
.24A
2
9/16"
1-1/16"
500
2
ANC 520257
257
14
.27/3.8
1.6
9/16"
1-1/16"
500
2
ANC 521895
1895
12
.27/3.8
2
9/16"
1-1/16"
500
2
SED 441057-1
57
14.0
.24A
2
9/16"
1-1/16"
500
2
SED 441895-1
1895
14.0
3.8W
2
9/16"
1-1/16"
2000
2
SPE 55
55
7.0
.41A
2
9/16
1-1/16"
500
1
SPE 57
57
14.0
.24A
2
9/16"
1-1/16"
500
1
Miniature (T-3-1/4) 13/32" Diameter Bayonet Base (BA9s)
Part #
Features
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
13
.33A
3
5/8"
1-3/16”
1000
2
SPE 1813
14.4
.10A
.86
5/8"
1-3/16"
1000
1
SPE 1815
14
.20A
1.4
3/4"
1-3/16"
3000
1
SPE 1816
13
.33A
3
5/8"
1-3/16"
1000
1
SPE 1819
28
.04A
.34
5/8"
1-3/16"
1000
1
SPE 1829
28
.07A
1.0
5/8"
1-3/16"
1000
1
SPE 1820
28
.10A
1.6
5/8"
1-3/16"
1000
1
SPE 1822
36
.10A
2.5
5/8"
1-3/16"
1000
1
ANC 521816
SPE 1828
SPE 1850
37.5
.05A
.65
5/8"
1-3/16"
3000
1
5
.09A
.25
5/8"
1-3/16"
1500
1
2 Filament
Miniature (T-4-1/2) 9/16" Diameter Bayonet Base (BA9s)
Part #
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 521416
1416
12.8
10.2W
8
5/8"
1-3/8”
1000
2
SPE 1416
1416
12.8
.80A
8
5/8"
1-3/8”
1000
1
46
Single Contact Miniature Flange Base / Festoon Bulbs
Single Contact Miniature Flange Base (P13.5s)
LIGHTING
Part #
Trade #
Volts
SED 441992-1
PR2
2.38
SED 441993-1
PR3
3.57
SPE PR2
-
2.38
SPE PR3
-
3.57
SPE PR4
-
SPE PR6
SPE PR7
CP
L.C.L.
M.O.L
Rated Hrs
Per Card
.50A
.8
1/4”
1-1/4”
15
2
1.8W
1.5
1/4”
1-1/4”
15
2
.35A
.80
1/4”
1-1/4”
15
1
.50A
1.4
1/4”
1-1/4”
15
1
2.33
.27A
.40
1/4”"
1-1/4”
10
1
-
2.47
.30A
.45
1/4”"
1-1/4”
30
1
-
3.7
.30A
.90
1/4”
1-1/4”
30
1
SPE PR12
-
5.95
.50A
3.10
1/4”
1-1/4”
15
1
SPE PR13
-
4.75
.50A
2.20
1/4”
1-1/4”
15
1
SPE PR15
-
4.82
.50A
1.9
1/4”
1-1/4”
30
1
SPE PR18
-
7.2
.55A
5.5
1/4”"
1-1/4”
3
1
SPE PR31
-
2.5
.7A
1.3
1/4”
1-1/4”
20
1
SPE PR32
-
4.8
.7A
3.3
1/4”
1-1/4”
20
1
► Also See:
Amp/Watt
LED Festoon Bulbs pg 51
Festoon/Miniature Cap Base
Trade #
Volts
Amp/Watt
CP
Dia.
M.O.L.
Rated Hrs
Per Card
Fig #
ANC 529095
Part #
-
13.5
0.50/6
2
.43”
1.42”
1000
2
99
ANC 529102
-
12
.80/10
8
.43”
1.62”
1000
2
99
ANC 529104
-
13.5
0.83/10
8
.43”
1.62”
1000
2
99
ANC 522112
211-2
12.8
.97/15
12
.43”
1.73”
1000
2
99
ANC 522122
212-2
13.5
.74/10
6
.43”
1.73”
2000
2
99
ANC 529333
-
12
.83/10
8
.43"
1.73"
2000
2
AB
HLA H83100011
-
12
-/ 5
-
-
-
-
HLA H83205021
-
12
15W
N/A
.625"
1.625"
N/A
1
99
PER 67-DP1-CLR
-
24
.42/10
8
.375"
1.6875"
N/A
2
99
PER 67-DP2-CLR
-
24
.75/18
10
.5675"
1.6875"
N/A
2
99
PER 69-DP-CLR
-
12
.83/10
8
.375"
1.625"
N/A
2
99
PER 70-DP0-CLR
-
12
.74/10
6
.375"
1.6875"
N/A
2
99
PER 70-DP1-CLR
-
12
.97/15
12
.5675"
1.6875"
N/A
2
99
PER 70-DP2-CLR
-
32
.40/12
12
.375"
1.6875"
N/A
2
99
99
-
24
.40/10
8
.375"
1.125"
N/A
2
99
SED 441211-1
211-2
12.8
15W
12
.4375”
1.6875"
N/A
2
99
SED 441212-1
212-2
13.8
10W
6
.4375”
1.6875"
N/A
2
99
SED 441070-1
-
12.8
15W
12
.4375”
1.5625"
N/A
2
99
SED 441209-1
209
12
5W
2
.25”
1.1875”
N/A
2
99
SED 441071
71
13.8
10W
6
.4375”
1.1875"
N/A
1
99
SED 441071-1
71
13.8
10W
6
.4375”
1.1875"
N/A
2
99
SPE 211-2
211-2
12.8
.97A
12
.375"
1.675"
1000
1
63
SPE 212-2
PER 72-DP1-CLR
212-2
13.5
.74A
6
.375"
1.675"
5000
1
63
SPE 561
561
12.8
.97A
12
.375"
1.71875"
1000
1
64
SPE 563
563
13.5
.52A
4
.375"
1.71875"
2000
1
64
47
Miniature / Miniature Halogen Bulbs
Miniature 2-Pin (G-3) 7/16" Dia Base
Part #
Volts
Amp
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
SPE 10
2.5
.50
.50
5/8"
15/16"
3000
1
SPE 12
6.3
.15
.35
5/8"
15/16"
5000
1
LIGHTING
Wedge Base (T-3-1/4) 13/32" Dia
Part #
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
ANC 520194
194
14
3.8W
2
9/16”
1-1/16”
2500
2
SED 441194-1
194
14
3.8W
2
9/16”
1-1/16”
2500
2
SPE 161
161
14
.19A
1
9/16”
1-1/16”
4000
1
SPE 168
168
14
.35A
3
9/16”
1-1/16”
1500
1
SPE 194
194
14
.27A
2
9/16”
1-1/16”
2500
1
SPE 658
658
14
.08A
.31
9/16”
1-1/16”
1500
1
Wedge Base (T-5) 5/8" Dia
Part #
Trade #
Volts
Amp/Watt
CP
L.C.L.
M.O.L.
Rated Hrs
Per Card
-
12
.69/9
1
11/32"
1-1/16"
4000
1
SED 441906-1
906
13.0
9.0W
6
9/16”
1-3/8”
N/A
2
SPE 906
906
13
.69A
6
.81"
1.49"
1000
1
SPE 912
912
12.8
1.0A
12
.81"
1.49"
1000
1
PER 338-DP2-CLR
Miniature Halogen/Xenon Bi-Pin Base (G4)
Part #
Volts
Amp/Watt
CP
Dia. x L
Rated Hrs
Per Card
ANC 529338
24
0.42/10
11
.35” x 1.18”
2000
1
ANC 529361
12
0.42/5
5
.35” x 1.18”
2000
1
ANC 529362
12
0.83/10
11
.35” x 1.18”
2000
1
ANC 529367
12
1.67/20
20
.35” x 1.18”
2000
1
ANC 529368
24
0.83/20
20
.35” x 1.18”
2000
1
SPE BRL
12
50W
1400
1-3/4"
50
1
24
20W
1-3/16"
3000
1
Halogen
SPE JC24V-20W(G4)
Xenon Bulbs
Lumens
SPE XJC12V-10W-T2
12
10W
100
1-3/16”
10000
1
SPE XJC12V-10W-T3
12
10W
100
1-5/16"
10000
1
Same as above but with a red cap cover for night lighting
SPE XJC12V-10W-T3RC
SPE XJC12V-15W-T3
12
15W
160
1-5/16"
10000
1
SPE XJC12V-20W-T3
12
20W
160
1-5/16"
10000
1
Same as above but with a red cap cover for night lighting
SPE XJC12V-20W-T3RC
SPE XJC24V10W
24
10W
90
1-5/16"
10000
1
SPE XJC24V20W
24
20W
210
1-5/16"
10000
1
► Also See:
Halogen
Base Adapters pg 39
Xenon
48
Halogen Bulbs
Miniature Halogen Bayonet Base (BA9s)
Part #
LIGHTING
Volts
Amp/Watt
Dia. x L
Rated Hrs
Per Card
ANC 529337
12
1.67/20
.35” x 1.18”
2000
1
ANC 529355
12
.42/5
.35” x 1.18”
2000
1
HLA H83010001
12
20W
11/32” x 1-5/32”
N/A
1
SPE 64111
12
5W
1-1/4”
240
1
Miniature Halogen S.C. Flanged Base
Part #
Volts
Amp/Watt
Dia. x L
Rated Hrs
Per Card
5.5
1.0A
.3125" x 1.18"
40
1
SPE HPR36
Halogen MR-11 Bulb With Re ector
Part #
SED 441811-1
Trade #
Volts
Amp/Watt
CP
Dia. x L
Per Card
MR-11
12
.83/10
500
1-3/8” x 1-5/16”
1
Halogen MR-16 Bulb With Re ector
Part #
SED 441816-1
Trade #
Volts
Amp/Watt
CP
Dia. x L
Per Card
MR-16
12
.83/10
500
2” x 1-3/4”
1
Spectro Halogen G-7 Searchlight Bulbs
Part #
Volt
Watts
CP
Range Miles
M.O.L.
Rated Hrs
Fig #
SPE DYS
120
600
1,626,000
1-1/4
2-1/2"
75
18
SPE FDS
24
150
891,000
1
2-11/16"
100
70
SPE FDT
12
100
1,168,000
1
2-1/8"
50
70
SPE 1945
32
200
865,000
N/A
2-1/4"
2000
70
Spotlight Bulbs
49
Sealed Beam Bulbs
Part #
Cross Reference
Volts
Amp/Watt
CP
Base
Rated Hrs
PAR-36, 4-1/2" Diameter
PER 432-12V, SED 405411
35 W
3,000
Screw-on
300 @ 14V.
28
50 W
10,000
Screw-on
400
GEL 4509
13.0
100 W
110,000
Screw-on
25
GEL 4519
Morse 33004-012
13.0
100 W
30,000
Screw-on
25
GEL 4546
12V hand lantern
4.7
.50 A
6,300
Screw-on
100
GEL 4700
ITT spot/ ood 67296-0000
13
100 W
100,000/50,000
Screw-on
25
GEL H7604
*Halogen Light (spot)
12.8
50 W
100,000
Screw-on
100
GEL H7614
*Halogen Light ( ood)
12.8
50 W
2,000
Screw-on
100
#4406
12.8
35 W
600
Screw-on
300
PER 432-001-12V
PAR-46, 5-1/4" Diameter
GEL 4419
GEL 4537
GEL 150PAR46/1
PER 433#2 12V
ITT 98040-0100, PER 433-32V
GEL 4522
12.8
35 W
1,600
Screw-on
300 @ 14V.
13.0
100 W
200,000
Screw-on
25
32
150 W
100,000
Screw-on
1,000
13
250 W
290,000
Screw-on
25
PAR-56, 7" Diameter
GEL 4541
PER 433#3 24V
28
450 W
470,000
Screw-on
-
GEL 4543
(Spot) 12V, ITT 98040-0020
12.5
100 W
250,000
Screw-on
50
12
100 W
240,000
Screw-on
100
30
200 W
360,000
Screw-on
500
GEL 4545
GEL 200PAR
ITT 98040-0080, PER 433#3-32V
PAR-64, 8" Diameter
GEL 4552
ITT 98040-0520
28
250 W
500,000
Screw-on
-
PER 433-004-12V
Replaces 4715
13
250 W
500,000
Screw-on
-
Rectangular
GEL H7935-1
REC-58 4.2" x 6.5" (halogen)
12.8
50W
175,000
Slip-on
100
GEL H9405
REC-48 3.6" x 5.9" (halogen)
12.8
50W
100,000
2 Angle Lugs
100
LIGHTING
12.8
GEL 4502
GEL 4411
50
Miscellaneous Bulbs
Spectro Incandescent
Searchlight Bulb (P28s)
Spectro Halogen Floodlight Bulbs
Volt
Watts
Lumens
Rated
Hrs
SPE Q150T3/CL12V
12
150
2250
2000
SPE Q300T3/CL24V
24
300
5400
2000
Part #
LIGHTING
SPE Q300T3/CL32V
32
300
5400
2000
SPE Q500T3/CL
120
500
10,000
2000
Part #
SPE DLY
Volt
Watts
Base
30
500
med. prefocus
Standard Products
Heat Lamp
Spectro Bulb for Floodlights
250W-130V, R40 re ector, infrared heat lamp
for winter heat or home use.
Double ended metal halide, 12V-130,000 lumens.
SPE 250R40/1
SPE MHIL-1500W
Albrite Par 38 Floodlight
Commonly used for fore and aft deck illumination.
Medium screw base, 12V. Economically priced.
AIF 75PAR38-12V
75 watts
Candelabra Screw Base (E12)
Part #
Volts
Amp/Watt
CP
12
6
40 Lumens
3/4" x 1-7/8"
1500
1
115/125
6
40 lumens
3/4" x 1-7/8"
3000
1
SPE 6S6-12V-CAND
SPE 6S6-125V-CAND
Dia. x L
G.E. Fluorescent Tubes
These 4, 8, 13 and 22W tubes are direct replacements for those supplied
in our Thinlite uorescent lamps. Cool white.
Part #
Watts
Base
Dia. x L
Rated Hrs
GEL F4T5/CW
4
min. - bi-pin
5/8" x 6"
6,000
GEL F6T5/CW
6
min. - bi-pin
5/8" x 9"
7,500
GEL F8T5/CW
8
min. - bi-pin
5/8" x 12"
7,500
GEL F13T5/CW
13
min. - bi-pin
5/8" x 21"
7,500
GEL F15T8/CW
15
med. - bi-pin
1" x 18"
7,500
GEL FC8T9/CW
22
Cir. - 4-pin
8-1/4" O.D.
9,000
Rated Hrs
Per Card
LED Bulbs
Ancor LED Festoon Bulbs
Sea-Dog LED Festoon Bulbs
• Shock resistant and safe around
ammable liquids
• 100,000 hour life expectancy
• 12V, voltage range: 9.5-14.0
• Each
• NOT for navigational use; cabin lighting only
• Nickle plated brass
• 180 milliamperes
• 3/8" diameter
Draw
CP
LxHxW
ANC 529205
40mA
48
1.73" x .5" x .5"
ANC 529206
40mA
32
1.43” x .46” x .5”
ANC 529207
60mA
32
1.64" x .5" x .5"
ANC 529208
40mA
48
1.23” x .5” x .5”
ANC 529209
60mA
48
1.57” x .5” x .5”
Ancor LED
Double Contact Bayonet Base Bulb
• Shock resistant and safe around ammable
liquids
• 100,000 hour life expectancy
• 12V
• Each
• NOT for navigational use; cabin lighting only
Part #
ANC 521127
Draw
Volts
Colour
10mA
14.0
Red
Sea-Dog LED MR-11 Replacement Bulb
• LED bulb with re ector produces a soft
white light
• 1-3/8" diameter
• 180 milliampere, 2.5 watt
• Plastic/aluminum construction
SED 442821-1
Each
Sea-Dog LED MR-16 Replacement Bulb
• LED bulb with re ector produces a soft
white light
• 1-7/8" diameter
• 180 milliampere, 5 watt
• Plastic/aluminum construction
SED 442826-1
Each
Sea-Dog LED Sealed Festoon Bulbs
• Sealed festoon bulb is water and
corrosion resistant
• 3/8" diameter
SED 442131-1
SED 442136-1
SED 442142-1
10W, 500 CP, 1-1/4"
10W, 500 CP, 1-1/2"
20W, 700 CP, 1-5/8"
SED 442231-1
SED 442232-1
SED 442236-1
SED 442237-1
SED 442244-1
SED 442245-1
2 LED, 10W, 500 CP, 1-1/4"
4 LED, 20W, 700 CP, 1-1/4"
4 LED, 20W, 700 CP, 1-1/2"
6 LED 25W, 800 CP, 1-1/2"
6 LED, 25W, 800 CP, 1-3/4"
8 LED, 30W, 900 CP, 1-3/4"
Sea-Dog LED Allround Festoon Bulbs
• For interior installations only
• 3/8" diameter
SED 442431-1
SED 442436-1
SED 442439-1
SED 442444-1
4 LED, 10W, 500 CP, 1-1/4"
6 LED, 20W, 700 CP, 1-1/2"
8 LED, 25W, 800 CP, 1-9/16"
12 LED, 35W, 1000 CP, 1-3/4"
ITC LED G4 Replacement Bulbs
• Fits into ITC’s halogen G4 pin xtures
• Dimmable with compatible LED dimmers
• Power saving LED technology
• Replace a 10 watt halogen with this 2 watt
LED & reduce power consumption by 80%
• 50,000 hour estimated life
• 3 year warranty
• 10-28V for use in 12V or 24V systems
• Low heat LED is safer & reduces heat generated in cabin as
compared to halogens.
• For AC applications, this LED will work with most electronic
transformers
ITC 69380-N3.5K Side pin, warm white
ITC 69380-N6K
Side pin, cool white
ITC 69385-N3.5K Rear pin, warm white
ITC 69385-N6K
Rear pin, cool white
Housing: .............
Heatsink:.............
Input Current:......
Beam Angle: .......
LED Colour:........
............................
Lumens Output:..
CRI: ....................
Operating Temp: .
PBT white -UV resistant
A380 Aluminum
0.15A at 12v
120°
Warm White (3500 300K)
Cool White (6000 700K)
105 Lm
65
-40°C to +200°C
LIGHTING
Part #
51
52
Incandescent Bulbs
Ancor Medium Screw Base Bulbs
Bulb
Style
Trade #
System
Volts
Design
Volts
Amps
Watts
Life
Hrs.
Qty/
Pkg.
ANC 511016
AB
15G12/12
12
13.5
1.25
15
1000
1
ANC 531025
AC
25A17/12
12
13.5
2.08
25
1000
2
ANC 531050
AC
50A17/12
12
13.5
4.17
50
1000
2
ANC 531075
AC
75A17/12
12
13.5
6.25
75
1000
2
ANC 533025
AC
25A17/34
32
36
.74
25
1000
2
ANC 533050
AC
50A17/34
32
36
1.47
50
1000
2
ANC 533015
AC
15A17/34
32
36
.44
15
1000
2
ANC 533075
AC
75A17/34
32
36
2.21
75
1000
2
Part #
LIGHTING
Crest Medium Base Inside Frosted Bulbs
• 4-7/8" x 2-7/8" dia.
• 12V med. base I.F. bulbs, A19
G.E. Medium Base
Inside Frosted Bulbs
Med-base I.F. bulbs. The shape and
diameter are denoted by a letter and number
of eights of an inch.
Part #
Volts
Watts
Shape
GEL 50A/RS
120
50
A-19, 4-7/8" x 2-7/8" dia
GEL 100/FR/RS
120
100
A-19, 4-7/8" x 2-7/8" dia
GEL 150A21/RS
130
150
A-19, 5-5/16" x 3-7/8" dia
Rough Service Bulb
SPE 15W-12V
SPE 25W-12V
SPE 50W-12V
SPE 100W-12V
15W-12V
25W-12V
50W-12V
100W-12V
SPE 25W-24V
SPE 50W-24V
SPE 100W-24V
25W-24V
50W-24V
100W-24V
SPE 25W-32V
SPE 50W-32V
SPE 100W-32V
25W-32/34V
50W-32V
100W-32V
Sea-Dog
12 Volt Medium Screw Base Bulb
Part #
Amps/Watt
Dia. x L
Pack
SED 441027-1
1.25/15
1-9/16" x 2-1/2"
1

lighting - Aqua Services

Transcription

Similar documents

TX20 / TX21 - effective solutions for Ex Zones