PDF catalog

Transcription

PDF catalog

®
2016
SKYBOLT PRODUCT CATALOG
Rev 010416
Manufacturer of Skytanium®-Steel and Stainless
CLoc® Diamondhead® ALoc® ZLoc®
Quarter Turn Panel Fasteners – Meet NASM5591
Distribution of Certified AN-MS-NAS Fasteners
AN-MS-NAS Fasteners – Panel Fasteners
USA DFARS Manufacturing – Engineering Design
TSO-C148 FAA-PMA AS9100 Compliant
9000 Airport Blvd Leesburg Regional Airport Leesburg, Florida 34788
352-326-0001 (Local) 800-223-1963 (Toll Free) 352-326-0012 (Fax) www.skybolt.com
REV 040616
Skybolt ® Panel Fasteners and Kits
All Trademarked Products Made in USA (unless noted)
Panel Fastener Design
CLoc®2000 Series
Series
Page
Introduction
Intro 1 and 2
2000 Series - General
CLoc®4000 Series
1
Common Sets
2
How to Choose a CLoc® Fastener
3
2500 Studs
4-6
2600 Studs - Slotted, Phillips, Wing, Ring, Folding Wing
7-9
2700 Studs - Slotted, Phillips
10
2800 Studs - Slotted, Phillips, Torx
11
Retainers - SK2600-LWS, SK27S5-1, SK2600-SW
12
Anodizing MIL-A-8625 Standard and Hard Coat
12
212-213 Series Non Floating Receptacle
13
201-203 Series Floating Receptacle
14
209-210-230 Adjustable Depth Screw-In Receptacles
15
2000 Series Nutserts
16
220 Nut Retained Receptacles - Flanged
17
221 Nut Retained Receptacles - Countersunk
18
MS21078 Platenuts
19
4000 Series General
20
Common Sets - Panel Overlap
21
4002, 40S5, 40S45, ZG4002, Wing, Ring, Folding Wing Series
22-24
Stud Selection (Non Adjusting Receptacle)
25
Stud Selection (Adjusting Receptacle)
26
Flush Grommets (G,H,40G1)
27
PlusFlush Grommets (N,N2,O, Ext Depth)
28
Ag Plane Grommets SKN4 and SK-N114 Series Grommets 28a
PlusFlush Grommets (N3, ZG-LA, Ext Depth)
29
R4G Retainers - R560 Backing Grommet - Panel Configurations
30
214, 244, 40R17(imported) Fixed Depth Non-Floating Receptacle
31
215 and 245 Adjustable Non-Floating Receptacle
32
410 Adjustable Depth Screw-In Receptacles
33
430 Adjustable Depth Screw-In Receptacles - Extended Nose
34
4000 Series Nutserts
35
4003 Series Fasteners
36
Intentionally Left Blank
37-41
SK2003-14A, 24A, 42A, 50ADJ Platemounts - Camwashers42-43
Skybolt Installation Tools
ZLoc® Series
CLoc® Installation Tools
Aviation Studs, Grommets
EHF and EJ Series - Design Options
Racing Fasteners
ALoc® Series
Southco® Series
Panel Kits
Studs, Grommets, Receptacles
#82 and #85 Series
Introduction
Complete Kit Cross Reference
Cessna Conversion Kit Application
Skybolt Founders and Policies
47
48-49
50
51-52
53
54-59
60
Beech Bonanza Kit Application
61
Vans RV Cowling Fastener Kits
62
Billing and Returns Policy
Skybolt Founders
Skybolt Aeromotive Corp
44
45-46
Copyright 2016
Index 01
123-124
125
Rev 040616
Rev 060616
Skybolt CLoc® 2000 Series Fasteners
3 - Piece Series (Stud/Retainer - Locking Receptacle)
ZG2500, ZG2600
See Page 4 and 9
SK2500W, ZG2500W,
SK2600W, ZG2600W
See Page 6 and 8
SK25S51, SK26S51
See Page 4 and 7
SK27S3, SK28S3, ZG28S3
See Page 10 and 11
SK2500R, ZG2500R,
SK2600R, ZG2600R
See Page 6 and 8
SK2500, SK2600
See Page 4 and 7
SK2700,SK2800
See Page 10 and 11
SK2600SFW, ZG2600SFW
See Page 9
SK28T3
See Page 11
SK2500 and
ZG2500 Series
SK2600 and
ZG2600 Series
SK2700, SK2800
ZG2800 Series
For SK and ZG2600 Series Studs - Drill panel For SK and ZG 2700/2800 Series Studs to 1/4 (Precision -.257 or 6.53mm)
Drill panel to 11/32 (Precision .328 or 8.33mm)
For SK and ZG2500 Series Studs - Drill panel to 1/4 (Precision -.257 or 6.53mm)
(Note: SK2600-SW Retainers will not work if
drilled to .320) -or- Dimpled Panels - Drill to
.213 (#3) then dimple to 100 degrees.
*Industry standard (non-machined) cups have a
slight 'bump' that is .359 diameter.
*Industry standard (non-machined) cups have a
slight 'bump' that is .359 diameter.
Outer Panel
.312 x .0620
.267 x .0620
For Retainers - See Page 12
SK212-10
SK212-12
Drill Center Hole 5/16 (7.94mm) for all panels
Drill Center Hole 13/32 (10.32mm) for all panels
Inner Support Panel
.500 12.699 mm
.625
15.875mm
.750
19.050mm
Receptacles - See Page 13 thru 18
Note: Add .100 to receptacle depth to allow for fastener protrusion when cycled lock to unlock (.500 + .100) = Clearance Requirement
Copyright 2016
Page 1
Some Parts Special Order Only
Refer to www.skybolt.com for current revision
Rev 010612
Skybolt CLoc® 2000 Series Common Sets
Forget Charts - The followings assemblies solve 99% of all applications
Stainless Series - Flush Head
Skytanium® Series - Flush Head
SK28S3-SET1
Total
ZG28S3-SET2
Grip Range
SK28S3-2S Phillips Stud
SK2600-LWS Stud Retainer
SK213-2 Adjustable Receptacle
SK28S3-SET1 and ZG28S3-SET1 Shown
.040-.400
Total
Grip Range
ZG28S3-2 Phillips Stud
.040-.400
3/32" Rivets
1/8" Rivets
Most Common Aircraft Set
Stainless Series - Protruding Head
Most Common NASCAR Set
Skytanium® Series - Protruding Head
SK26S51-SET1
Total
ZG2600-SET2
Grip Range
SK26S51-1S Phillips Stud
.040-.400
3/32" Rivets
Total
Grip Range
ZG2600-1 Collared Slot Stud
.040-.400
1/8" Rivets
Note: Order SET1 for SK213-2 (3/32 Rivets). Order SET2 for SK213-28 (1/8 Rivets)
ZG2600-SET1 Shown
ZG28S3/SK28S3
ZG2600
SK26S51
SK213
What does Overlap Mean? Work from the Inner Panel out (Choose receptacle first), then
determine location of pilot hole
Pilot Hole
Either B Minimum* = .195 (SK2700); .250 (SK2600,SK2800)
B
B
Outer Panel
C
C=
Inner Panel
A
A
Minimum Panel Overlap = A Minimum x 2
Recommended .300 + A Minimum
Either A Minimum* = .178 (SK212-10 Receptacle) or .250 (SK212-12, SK213 or
.315 (SK201/203 Series Receptacle)
*Minimums reflect part dimensions in a perfect world installation.
Installation Tools Required Template-213
Template to drill rivet holes with #30 Drill
Copyright 2012
Page 2
Some Part#s Special Order Only
Rev 010612
How to Choose the Right CLoc® Fastener
The application will determine the correct fastener.
1)
Is the application non-structural with no mass consideration?
Consider the CLoc® 2000 Series
2)
Is the application semi-structural with some mass to consider?
Consider the CLoc® 4000 or 6000 Series (if lip or panel overlap greater than 1.00)
3)
Is available lip or panel overlap restrictive?
(width required to mount receptacle)
.355 to .500 – Consider the CLoc® 2500 Series
.500 to .710 – Consider the CLoc® 26000/2700/2800 Series
.710* or more – Consider the CLoc® 4000 or 6000 Series (.860* for SK244/245 Rec)
See diagram on Page 2 or Page 15 for panel configuration/restrictions.
4)
Is weight a factor?
Consider the Skytanium® CLoc® ZG Series for 30% to 50% Weight savings (without
sacrificing steel strength ratings)
5)
Do you prefer a Rivet Receptacle? A crimp Receptacle? A Backing Nut
Receptacle? Or a bonded Receptacle?
Need Convincing From Current Skybolt Customer
Applications?
What is the most demanding endurance application that also requires the absolute lightest fastener?
Auto racing. Skybolt has engineered fasteners that are lighter but stronger than anything on the
market. What works on Sundays also earns its wings 24/7 in the aerospace world, the defense world,
the commercial applications world, and the marine world.






Most NASCAR teams rely on Skybolt™ Skytanium® Series Fasteners for significant weight
savings without any sacrifice in strength.
One of the world’s largest commercial aircraft companies found the perfect Avionics Fastener
in the Skybolt™ Skytanium® CLoc® ZG2500 Series Fasteners – a 50% weight savings without
sacrificing strength.
The Cessna 150, 172, 177, and 182 fleet just found major relief in the new Skybolt™ SK2003
Cowling Mount using CLoc® 4000 Series Stainless Fasteners.
The new Skybolt™ 6000 Series Fasteners are designed for IED (Explosive) applications and
armor plating applications.
One of the world’s foremost producers of missile systems found the perfect CLoc® Adjustable
Bonded Receptacle for composite structures.
Another world leader in aerospace manufacturing found the perfect CLoc® Receptacle for an
anti-abrasive application.
Copyright 2012
Page 3
Refer to www.skybolt .com for current revision
Rev 062713
Skybolt CLoc® SK2500 ZG2500 Protruding Head Series
Stainless & Skytanium ®
Light Weight Aerospace Panel Fasteners - 50% Weight Savings
Designed for Restrictive (Minimum Overlap) Mounting Surfaces
Reduced Thru-Hole Diameter For Mounting Close to Edge
TSO-C148 Approved. Designed to Exceed NASM5591
Honeywell-Airbus Approvals - A380 Avionics (ZG2500 Series)
Tensile/Shear Loads of 200 LBS Working - 300 Lbs Plus Ultimate
SK2500SC
ZG2500
ZG2500 Series Collared Slot
(A= .375)
SK2500 Series Standard Slot
(A= .302))
SK25S51 Series Phillips
(A= .302))
SK25S51
ZG25S51
SK2500
Note: 2500 Series Studs may use SK212-10, SK212-12, or SK213 Series Receptacles
SK212-10 Series
Fixed Depth
Receptacle
Combined Panels
Thickness
Decimal
Min
Max
Protruding Head
2500 Series Stud
Total
Thickness
Millimeter
Min
Max
Stud Length
L
Decimal Millimeter
Stainless
Standard Slot
Stainless
Collared Slot
Stainless
Phillips
Skytanium
Collared Slot
Skytanium
Phillips(1)
.010
.029
0.254
0.737
.730
18.542
SK2500-0S
SK2500SC0S
SK25S51-0
ZG2500-0
ZG25S51-0
.030
.059
0.762
1.499
.760
19.304
SK2500-1S
SK2500SC1S
SK25S51-1
ZG2500-1
ZG25S51-1
.060
.089
1.524
2.261
.790
20.066
SK2500-2S
SK2500SC2S
SK25S51-2
ZG2500-2
ZG25S51-2
.090
.119
2.286
3.023
.820
20.828
SK2500-3S
SK2500SC3S
SK25S51-3
ZG2500-3
ZG25S51-3
.120
.149
3.048
3.785
.850
21.590
SK2500-4S
SK2500SC4S
SK25S51-4
ZG2500-4
ZG25S51-4
.150
.179
3.810
4.547
.880
22.352
SK2500-5S
SK2500SC5S
SK25S51-5
ZG2500-5
ZG25S51-5
.180
.209
4.572
5.309
.910
23.114
SK2500-6S
SK2500SC6S
SK25S51-6
ZG2500-6
ZG25S51-6
.210
.239
5.334
6.071
.940
23.876
SK2500-7S
SK2500SC7S
SK25S51-7
ZG2500-7
ZG25S51-7
.240
.269
6.096
6.833
.970
24.638
SK2500-8S
SK2500SC8S
SK25S51-8
ZG2500-8
ZG25S51-8
.270
.299
6.858
7.595
1.000
25.400
SK2500-9S
SK2500SC9S
SK25S51-9
ZG2500-9
ZG25S51-9
.300
.329
7.620
8.357
1.030
26.162
SK2500-10S
SK2500SC10S
SK25S51-10
ZG2500-10
ZG25S51-10
.330
.359
8.382
9.119
1.060
26.924
SK2500-11S
SK2500SC11S
SK25S51-11
ZG2500-11
ZG25S51-11
.360
.389
9.144
9.881
1.090
27.686
SK2500-12S
SK2500SC12S
SK25S51-12
ZG2500-12
ZG25S51-12
.390
.419
9.906
10.643
1.120
28.448
SK2500-13S
SK2500SC13S
SK25S51-13
ZG2500-13
ZG25S51-13
.420
.449
10.668
11.405
1.150
29.210
SK2500-14S
SK2500SC14S
SK25S51-14
ZG2500-14
ZG25S51-14
.450
.479
11.430
12.167
1.180
29.972
SK2500-15S
SK2500SC15S
SK25S51-15
ZG2500-15
ZG25S51-15
Note: See page 12 for plating options and part# suffix. Note (1) ZG25S51 use stainless Stud/Skytanium Cup.
Copyright 2013
Page 4
Rev 062812
Skybolt CLoc® SK2500 ZG2500 Flush Head Series
SK25S3
ZG25S3
.267
Note: 2500 Series Studs may use SK212-10, SK212-12, or SK213 Series Receptacles
SK212-10 Series
Fixed Depth
Receptacle
Combined Panel
Thickness
Decimal
Min
Max
Total
Thickness
Millimeter
Min
Max
Stud Length
L
Decimal Millimeter
Flush Head
2500 Series Stud
Stainless
Phillips
Skytanium
Phillips (1)
.010
.029
0.254
0.737
.610
15.494
SK25S3-1S
ZG25S3-1
.030
.059
0.762
1.499
.640
16.256
SK25S3-2S
ZG25S3-2
.060
.089
1.524
2.261
.670
17.018
SK25S3-3S
ZG25S3-3
.090
.119
2.286
3.023
.700
17.780
SK25S3-4S
ZG25S3-4
.120
.149
3.048
3.785
.730
18.542
SK25S3-5S
ZG25S3-5
.150
.179
3.810
4.547
.760
19.304
SK25S3-6S
ZG25S3-6
.180
.209
4.572
5.309
.790
20.066
SK25S3-7S
ZG25S3-7
.210
.239
5.334
6.071
.820
20.828
SK25S3-8S
ZG25S3-8
.240
.269
6.096
6.833
.850
21.590
SK25S3-9S
ZG25S3-9
.270
.299
6.858
7.595
.880
22.352
SK25S3-10S
ZG25S3-10
.300
.329
7.620
8.357
.910
23.114
SK25S3-11S
ZG25S3-11
.330
.359
8.382
9.119
.940
23.876
SK25S3-12S
ZG25S3-12
.360
.389
9.144
9.881
.970
24.638
SK25S3-13S
ZG25S3-13
.390
.419
9.906
10.643
1.000
25.400
SK25S3-14S
ZG25S3-14
.420
.449
10.668
11.405
1.030
26.162
SK25S3-15S
ZG25S3-15
.450
.479
11.430
12.167
1.060
26.924
SK25S3-16S
ZG25S3-16
Note: See page 12 for plating options and part# suffix Note (1) ZG25S3 use stainless stud/Skytanium cup.
Copyright 2012
Page 5
Rev 022114
Skybolt CLoc® SK2500 Winged & Folding Ring Series
ZG2500R Series Honeywell-Airbus Approvals - A380 Avionics
SK2500W and ZG2500W
SK2500R and ZG2500R
Note: 2500 Series Studs may use SK212-10, SK212-12, or SK213 Series Receptacles.
Winged Head
2500 Series Studs
SK212-10 Series
Fixed Depth
Folding Ring Head
2500 Series Studs
Receptacle
Combined Panel
Thickness
Thickness
Stud Length
Decimal
Millimeter
L
Stainless
Skytanium
Stud Length
Stainless
Skytanium
Decimal Millimeter
Wing
Wing
Decimal
Millimeter
Folding Ring
Folding Ring
L
Min
Max
Min
Max
0.010
0.029
0.254
0.737
.730
18.542
SK2500-0SW
ZG2500-0W
.795
20.193
SK2500R0S
ZG2500R0
0.030
0.059
0.762
1.499
.760
19.304
SK2500-1SW
ZG2500-1W
.825
20.955
SK2500R1S
ZG2500R1
0.060
0.089
1.524
2.261
.790
20.066
SK2500-2SW
ZG2500-2W
.855
21.717
SK2500R2S
ZG2500R2
0.090
0.119
2.286
3.023
.820
20.828
SK2500-3SW
ZG2500-3W
.885
22.479
SK2500R3S
ZG2500R3
0.120
0.149
3.048
3.785
.850
21.590
SK2500-4SW
ZG2500-4W
.915
23.241
SK2500R4S
ZG2500R4
0.150
0.179
3.810
4.547
.880
22.352
SK2500-5SW
ZG2500-5W
.945
24.003
SK2500R5S
ZG2500R5
0.180
0.209
4.572
5.309
.910
23.114
SK2500-6SW
ZG2500-6W
.975
24.765
SK2500R6S
ZG2500R6
0.210
0.239
5.334
6.071
.940
23.876
SK2500-7SW
ZG2500-7W
1.005
25.527
SK2500R7S
ZG2500R7
0.240
0.269
6.096
6.833
.970
24.638
SK2500-8SW
ZG2500-8W
1.035
26.289
SK2500R8S
ZG2500R8
0.270
0.299
6.858
7.595
1.000
25.400
SK2500-9SW
ZG2500-9W
1.065
27.051
SK2500R9S
ZG2500R9
0.300
0.329
7.620
8.357
1.030
26.162
SK2500-10SW
ZG2500-10W
1.095
27.813
SK2500R10S
ZG2500R10
0.330
0.359
8.382
9.119
1.060
26.924
SK2500-11SW
ZG2500-11W
1.125
28.575
SK2500R11S
ZG2500R11
0.360
0.389
9.144
9.881
1.090
27.686
SK2500-12SW
ZG2500-12W
1.155
29.337
SK2500R12S
ZG2500R12
0.390
0.419
9.906
10.643
1.120
28.448
SK2500-13SW
ZG2500-13W
1.185
30.099
SK2500R13S
ZG2500R13
0.420
0.449
10.668
11.405
1.150
29.210
SK2500-14SW
ZG2500-14W
1.215
30.861
SK2500R14S
ZG2500R14
0.450
0.479
11.430
12.167
1.180
29.972
SK2500-15SW
ZG2500-15W
1.245
31.623
SK2500R15S
ZG2500R15
Note: See page 12 for plating options and part# suffix
Copyright 2014
Page 6
Rev 102114
Skybolt CLoc® SK2600 ZG2600 Protruding Head Series
TSO-C148 Approved. NASM5591 Tested and Certified
Tensile/Shear Loads of 200 LBS Working - 300* Lbs Plus Ultimate
ZG2600 Series Collared Slot
A= .375
SK26S51 Series Phillips Head
A= .302
SK2600 Series Standard Slot
A= .302
ZG2600
SK26S51
ZG26S51
SK2600
Note: 2600 Series Studs will not fit SK212-10 Series Receptacles. Use SK212-12 or SK213 Series Receptacle
Protruding Head 2600 Series Studs
SK212 Series
SK213-1* and -2 Series
Fixed Depth
Adjustable Depth
Stainless
Stainless
Skytanium
Receptacle
Receptacle
Standard Slot
Phillips
Collared Slot
Phillips (1)
Combined Panel
Thickness
Thickness
Combined Panel
Total
Camloc®
Camloc®
Thickness (SK213-2)
Stud Length
2600S Series
26S51 Series
Skytanium
L
Monadnock®
Monadnock®
Decimal Millimeter
1126007 Series
1126008 Series
18.542
SK2600-0S
SK26S51-0
ZG2600-0
ZG26S51-0
19.304
SK2600-1S
SK26S51-1
ZG2600-1
ZG26S51-1
.790
20.066
SK2600-2S
SK26S51-2
ZG2600-2
ZG26S51-2
9.652
.820
20.828
SK2600-3S
SK26S51-3
ZG2600-3
ZG26S51-3
2.032
10.414
.850
21.590
SK2600-4S
SK26S51-4
ZG2600-4
ZG26S51-4
.440
2.794
11.176
.880
22.352
SK2600-5S
SK26S51-5
ZG2600-5
ZG26S51-5
.140
.470
3.556
11.938
.910
23.114
SK2600-6S
SK26S51-6
ZG2600-6
ZG26S51-6
6.071
.170
.500
4.318
12.700
.940
23.876
SK2600-7S
SK26S51-7
ZG2600-7
ZG26S51-7
6.096
6.833
.200
.530
5.080
13.462
.970
24.638
SK2600-8S
SK26S51-8
ZG2600-8
ZG26S51-8
0.299
6.858
7.595
.230
.560
5.842
14.224
1.000
25.400
SK2600-9S
SK26S51-9
ZG2600-9
ZG26S51-9
0.300
0.329
7.620
8.357
.260
.590
6.604
14.986
1.030
26.162
SK2600-10S
SK26S51-10
ZG2600-10
ZG26S51-10
0.330
0.359
8.382
9.119
.290
.620
7.366
15.748
1.060
26.924
SK2600-11S
SK26S51-11
ZG2600-11
ZG26S51-11
0.360
0.389
9.144
9.881
.320
.650
8.128
16.510
1.090
27.686
SK2600-12S
SK26S51-12
ZG2600-12
ZG26S51-12
0.390
0.419
9.906
10.643
.350
.680
8.890
17.272
1.120
28.448
SK2600-13S
SK26S51-13
ZG2600-13
ZG26S51-13
0.420
0.449
10.668 11.405
.380
.710
9.652
18.034
1.150
29.210
SK2600-14S
SK26S51-14
ZG2600-14
ZG26S51-14
0.450
0.479
11.430 12.167
.410
.740
10.414 18.796
1.180
29.972
SK2600-15S
SK26S51-15
ZG2600-15
ZG26S51-15
Decimal
Millimeter
Decimal
Millimeter
Min
Max
Min
Max
Min*
Max
Min
Max
0.010
0.029
0.254
0.737
.020
.290
0.508
7.366
.730
0.030
0.059
0.762
1.499
.020
.320
0.508
8.128
.760
0.060
0.089
1.524
2.261
.020
.350
0.508
8.890
0.090
0.119
2.286
3.023
.050
.380
1.270
0.120
0.149
3.048
3.785
.080
.410
0.150
0.179
3.810
4.547
.110
0.180
0.209
4.572
5.309
0.210
0.239
5.334
0.240
0.269
0.270
* For SK213-1 Receptacles, add .120 to Min Grip. Note (1) ZG26S51 use stainless stud/Skytanium cup. Note: Cloc-Camloc grip charts are identical for 2600 Series
parts. Physical dimensions are identical. See page 12 for plating options and part# suffix. Tested to 600 lbs. Skybolt stainless CLoc® testing exceeds NASM5591
standards for tensile/shear and endurance.
Copyright 2014
Page 7
Rev 102114
Skybolt CLoc® SK2600 Winged & Folding Ring Series
SK2600W and ZG2600W
SK2600R and ZG2600R
Winged
2600 Series Studs
Folding Ring Head
2600 Series Studs
SK212 Series
Fixed Depth
Adjustable Depth
Stainless
Skytanium
Stainless
Skytanium
Receptacle
Receptacle
Wing
Wing
Folding Ring
Folding Ring
Combined Panel
Thickness
Decimal
Thickness
Millimeter
Combined Panel
Total
Camloc®
Thickness (SK213-2)
Stud Length
2600SW Series
L
Monadnock®
Decimal
Millimeter
Total
Stud Length
L
Min
Max
Min
Max
Min*
Max
Min
Max
Decimal Millimeter 1126014 Series
Decimal Millimeter
.010
.029
0.254
0.737
.020
.290
0.508
7.366
.730
18.542
SK2600-0SW
ZG2600-0W
.795
20.193
SK2600R0S
ZG2600R0
.030
.059
0.762
1.499
.020
.320
0.508
8.128
.760
19.304
SK2600-1SW
ZG2600-1W
.825
20.955
SK2600R1S
ZG2600R1
.060
.089
1.524
2.261
.020
.350
0.508
8.890
.790
20.066
SK2600-2SW
ZG2600-2W
.855
21.717
SK2600R2S
ZG2600R2
.090
.119
2.286
3.023
.050
.380
1.270
9.652
.820
20.828
SK2600-3SW
ZG2600-3W
.885
22.479
SK2600R3S
ZG2600R3
.120
.149
3.048
3.785
.080
.410
2.032
10.414
.850
21.590
SK2600-4SW
ZG2600-4W
.915
23.241
SK2600R4S
ZG2600R4
.150
.179
3.810
4.547
.110
.440
2.794
11.176
.880
22.352
SK2600-5SW
ZG2600-5W
.945
24.003
SK2600R5S
ZG2600R5
.180
.209
4.572
5.309
.140
.470
3.556
11.938
.910
23.114
SK2600-6SW
ZG2600-6W
.975
24.765
SK2600R6S
ZG2600R6
.210
.239
5.334
6.071
.170
.500
4.318
12.700
.940
23.876
SK2600-7SW
ZG2600-7W
1.005
25.527
SK2600R7S
ZG2600R7
.240
.269
6.096
6.833
.200
.530
5.080
13.462
.970
24.638
SK2600-8SW
ZG2600-8W
1.035
26.289
SK2600R8S
ZG2600R8
.270
.299
6.858
7.595
.230
.560
5.842
14.224
1.000
25.400
SK2600-9SW
ZG2600-9W
1.065
27.051
SK2600R9S
ZG2600R9
.300
.329
7.620
8.357
.260
.590
6.604
14.986
1.030
26.162
SK2600-10SW
ZG2600-10W
1.095
27.813
SK2600R10S
ZG2600R10
.330
.359
8.382
9.119
.290
.620
7.366
15.748
1.060
26.924
SK2600-11SW
ZG2600-11W
1.125
28.575
SK2600R11S
ZG2600R11
.360
.389
9.144
9.881
.320
.650
8.128
16.510
1.090
27.686
SK2600-12SW
ZG2600-12W
1.155
29.337
SK2600R12S
ZG2600R12
.390
.419
9.906
10.643
.350
.680
8.890
17.272
1.120
28.448
SK2600-13SW
ZG2600-13W
1.185
30.099
SK2600R13S
ZG2600R13
.420
.449
10.668 11.405
.380
.710
9.652
18.034
1.150
29.210
SK2600-14SW
ZG2600-14W
1.215
30.861
SK2600R14S
ZG2600R14
.450
.479
11.430 12.167
.410
.740
10.414 18.796
1.180
29.972
SK2600-15SW
ZG2600-15W
1.245
31.623
SK2600R15S
ZG2600R15
* For SK213-1 Receptacles, add .120 to Min Grip. Note (1) ZG26S51 use stainless stud/Skytanium cup. Note: Cloc-Camloc grip charts are identical for 2600 Series parts. Physical
dimensions are identical. See page 12 for plating options and part# suffix. Tested to 600 lbs. Skybolt stainless CLoc® testing exceeds NASM5591 standards for tensile/shear and
endurance.
Copyright 2014
Page 8
Rev 080516
Skybolt Cloc® SK2600 Folding Wing Series
Designed to Exceed NASM5591 TSO Pending
US Patent Pending
SK2600 Style Folding Wing
SK2601 Style Folding Wing
For all Dash#s
A
B(1)
C
D (1)
Decimal
mm
Decimal
mm
Decimal
mm
Decimal
mm
SK2600SFW
1.080
27.432
.760
19.304
.567
14.402
.375
9.525
SK2601SFW
1.000
25.400
.993
25.222
.800
20.320
.375
9.525
Note (1) B & D dimensions - Nominal locked position
SK212 Series
Fixed Depth
Adjustable Depth
Folding Wing
2600 Series Studs
Receptacle
Receptacle
Combined Panel
Combined Panel
Total
Thickness (SK213-2)
Stud Length
Thickness
Thickness
Decimal
Millimeter
Decimal
Millimeter
L
SK2600 Series SK2601 Series
Stainless
Stainless
Min
Max
Min
Max
Min*
Max
Min
Max
Decimal
mm
Folding Wing
Folding Wing
.010
.029
0.254
0.737
.020
.290
0.508
7.366
0.890
22.606
SK2600-0SFW
SK2601-0SFW
.030
.059
0.762
1.499
.020
.320
0.508
8.128
0.920
23.368
SK2600-1SFW
SK2601-1SFW
.060
.089
1.524
2.261
.020
.350
0.508
8.890
0.950
24.130
SK2600-2SFW
SK2601-2SFW
.090
.119
2.286
3.023
.050
.380
1.270
9.652
0.980
24.892
SK2600-3SFW
SK2601-3SFW
.120
.149
3.048
3.785
.080
.410
2.032
10.414
1.010
25.654
SK2600-4SFW
SK2601-4SFW
.150
.179
3.810
4.547
.110
.440
2.794
11.176
1.040
26.416
SK2600-5SFW
SK2601-5SFW
.180
.209
4.572
5.309
.140
.470
3.556
11.938
1.070
27.178
SK2600-6SFW
SK2601-6SFW
.210
.239
5.334
6.071
.170
.500
4.318
12.700
1.100
27.940
SK2600-7SFW
SK2601-7SFW
.240
.269
6.096
6.833
.200
.530
5.080
13.462
1.130
28.702
SK2600-8SFW
SK2601-8SFW
.270
.299
6.858
7.595
.230
.560
5.842
14.224
1.160
29.464
SK2600-9SFW
SK2601-9SFW
.300
.329
7.620
8.357
.260
.590
6.604
14.986
1.190
30.226
SK2600-10SFW SK2601-10SFW
.330
.359
8.382
9.119
.290
.620
7.366
15.748
1.220
30.988
.360
.389
9.144
9.881
.320
.650
8.128
16.510
1.250
31.750
.390
.419
9.906
10.643
.350
.680
8.890
17.272
1.280
32.512
.420
.449
10.668
11.405
.380
.710
9.652
18.034
1.310
33.274
.450
.479
11.430
12.167
.410
.740
10.414
18.796
1.340
34.036
* For SK213-1 Receptacles, add .120 to Min Grip. Note: Cloc-Camloc grip charts are identical for 2600 Series parts. .
Copyright 2016
Page 9
Rev 052514
Skybolt CLoc® SK2700 Flush Head Series
Stainless
SK27S3S
SK2700S
Flush Head
2700 Series Stud
SK212 Series
Fixed Depth
Adjustable Depth
Stainless
Stainless
Receptacle
Receptacle
Standard Slot
Phillips
Combined Panel
Thickness
Thickness
Decimal
Millimeter
Combined Panel
Total
Camloc®
Camloc®
Thickness (SK213-2)
Stud Length
2700S Series
27S3S Series
Decimal
Millimeter
L
Monadnock®
Monadnock®
Min
Max
Min
Max
Min*
Max
Min
Max
Decimal
Millimeter
1127003 Series
112709 Series
.010
.029
0.254
0.737
.020
.270
0.508
6.858
.610
15.494
SK2700-1S
SK27S3-1S
.030
.059
0.762
1.499
.020
.300
0.508
7.620
.640
16.256
SK2700-2S
SK27S3-2S
.060
.089
1.524
2.261
.050
.330
1.270
8.382
.670
17.018
SK2700-3S
SK27S3-3S
.090
.119
2.286
3.023
.080
.360
2.032
9.144
.700
17.780
SK2700-4S
SK27S3-4S
.120
.149
3.048
3.785
.110
.390
2.794
9.906
.730
18.542
SK2700-5S
SK27S3-5S
.150
.179
3.810
4.547
.140
.420
3.556
10.668
.760
19.304
SK2700-6S
SK27S3-6S
.180
.209
4.572
5.309
.170
.450
4.318
11.430
.790
20.066
SK2700-7S
SK27S3-7S
.210
.239
5.334
6.071
.200
.480
5.080
12.192
.820
20.828
SK2700-8S
SK27S3-8S
.240
.269
6.096
6.833
.230
.510
5.842
12.954
.850
21.590
SK2700-9S
SK27S3-9S
.270
.299
6.858
7.595
.260
.540
6.604
13.716
.880
22.352
SK2700-10S
SK27S3-10S
.300
.329
7.620
8.357
.290
.570
7.366
14.478
.910
23.114
SK2700-11S
SK27S3-11S
.330
.359
8.382
9.119
.320
.600
8.128
15.240
.940
23.876
SK2700-12S
SK27S3-12S
.360
.389
9.144
9.881
.350
.630
8.890
16.002
.970
24.638
SK2700-13S
SK27S3-13S
.390
.419
9.906
10.643
.380
.660
9.652
16.764
1.000
25.400
SK2700-14S
SK27S3-14S
.420
.449
10.668
11.405
.410
.690
10.414
17.526
1.030
26.162
SK2700-15S
SK27S3-15S
.450
.479
11.430
12.167
.440
.720
11.176
18.288
1.060
26.924
SK2700-16S
SK27S3-16S
* For SK213-1 Series Receptacles - Add .120 to min thickness (shorter barrel) Note: Cloc-Camloc grip charts are not identical for
2700 Series parts. Physical dimensions are identical. Note: See page 12 for plating options and part# suffix. Tested to 600 lbs.
Skybolt stainless CLoc® testing exceeds NASM5591 standards for tensile/shear and endurance.
Copyright 2014
Page 10
Rev 040916
Skybolt CLoc® SK2800 Flush Head Series
SK28T3
ZG28T3
SK2800S
.328
SK28S3 and ZG28S3
SK212 Series
Fixed Depth
Adjustable Depth
Receptacle
Receptacle
Combined Panel
Combined Panel
Total
Thickness (SK213-2)
Stud Length
Thickness
Thickness
Decimal
Millimeter
Decimal
Millimeter
L
Flush Head
2800 Series Stud
Stainless
Stainless
Skytanium
Skytanium
Phillips
Phillips (2)
#15 Torx (3)
SK2800-1S
SK28S3-1S
ZG28S3-1
ZG28T3-1
SK2800-2S
SK28S3-2S
ZG28S3-2
ZG28T3-2
17.018
SK2800-3S
SK28S3-3S
ZG28S3-3
ZG28T3-3
.700
17.780
SK2800-4S
SK28S3-4S
ZG28S3-4
ZG28T3-4
9.906
.730
18.542
SK2800-5S
SK28S3-5S
ZG28S3-5
ZG28T3-5
3.556
10.668
.760
19.304
SK2800-6S
SK28S3-6S
ZG28S3-6
ZG28T3-6
.450
4.318
11.430
.790
20.066
SK2800-7S
SK28S3-7S
ZG28S3-7
ZG28T3-7
.200
.480
5.080
12.192
.820
20.828
SK2800-8S
SK28S3-8S
ZG28S3-8
ZG28T3-8
6.833
.230
.510
5.842
12.954
.850
21.590
SK2800-9S
SK28S3-9S
ZG28S3-9
ZG28T3-9
6.858
7.595
.260
.540
6.604
13.716
.880
22.352
SK2800-10S
SK28S3-10S
ZG28S3-10
ZG28T3-10
.329
7.620
8.357
.290
.570
7.366
14.478
.910
23.114
SK2800-11S
SK28S3-11S
ZG28S3-11
ZG28T3-11
.359
8.382
9.119
.320
.600
8.128
15.240
.940
23.876
SK2800-12S
SK28S3-12S
ZG28S3-12
ZG28T3-12
.360
.389
9.144
9.881
.350
.630
8.890
16.002
.970
24.638
SK2800-13S
SK28S3-13S
ZG28S3-13
ZG28T3-13
.390
.419
9.906
10.643
.380
.660
9.652
16.764
1.000
25.400
SK2800-14S
SK28S3-14S
ZG28S3-14
ZG28T3-14
.420
.449
10.668
11.405
.410
.690
10.414
17.526
1.030
26.162
SK2800-15S
SK28S3-15S
ZG28S3-15
ZG28T3-15
.450
.479
11.430
12.167
.440
.720
11.176
18.288
1.060
26.924
SK2800-16S
SK28S3-16S
ZG28S3-16
ZG28T3-16
Min
Max
Min
Max
Min*
Max
Min
Max
Decimal Millimeter Standard Slot
.010
.029
0.254
0.737
.020
.270
0.508
6.858
.610
15.494
.030
.059
0.762
1.499
.020
.300
0.508
7.620
.640
16.256
.060
.089
1.524
2.261
.050
.330
1.270
8.382
.670
.090
.119
2.286
3.023
.080
.360
2.032
9.144
.120
.149
3.048
3.785
.110
.390
2.794
.150
.179
3.810
4.547
.140
.420
.180
.209
4.572
5.309
.170
.210
.239
5.334
6.071
.240
.269
6.096
.270
.299
.300
.330
* For SK213-1 Series Receptacles - Add .120 to min thickness (shorter barrel) Note: Cloc-Camloc grip charts are not identical for 2800 Series parts. Physical
dimensions are identical. Note (2) ZG28S3 use stainless stud/Skytanium cup. (3) Skytanium stud/cup Note: See page 12 for plating options and part# suffix
Copyright 2016
Page 11
Rev 010612
Skybolt CLoc® 2000 Series Retainers
SK2600-LWS
Solid Retaining Ring
General Purpose
Designed as a general purpose
retainer. Will not allow studs to
retract when unlocked. Install with
SK-T2698 Tool.
SK27S5-1
Solid Retaining Ring
for Dimpled Panels
Designed for SK2700 or SK2800 Flush
Studs installed in a thin dimpled panel.
Will not allow studs to retract when
unlocked. Install with SK-T2698 Tool
Install with SK-T2698 Tool. Only install after all studs have been fitted. Place retainer flat on
the end of the stud cup; use slotted end of tool to push retainer until secure with the panel.
SK2600-SW
Split Ring Retainer
Designed for a curved panel application that require
studs to retract when unlocked. They will not
function with any 2700 or 2800 Series Studs with
oversized drilled holes for the cup dimple. They will
only work with .257 holes (after dimpling panel) or a
countersunk panel with .257 hole.
With pliers, bend open at the split; twist washer
around stud crosspin; bend close. See
www.skybolt.com for details.
MIL-A-8625 Anodizing
Standard Anodizing MIL-A-8625, Type II, Class 1
Add
Finish
Par# Suffix
Example
Clear
A
ZG2500-4A Standard anodizing - Clear
Standard Anodizing MIL-A-8625, Type II, Class 2
Add
Finish
Par# Suffix
Example
Black
A1BLK
ZG2500-4A1BLK Standard anodizing - Black
Red
A1RED
ZG2500-4A1RED Standard anodizing - Red
Hard Anodizing MIL-8625, Type III, Class 1
Add
Finish
Par# Suffix
Example
Clear
B
ZG2500-4B Hard anodizing - Clear
Hard Anodizing MIL-8625, Type III, Class 2
Add
Finish
Par# Suffix
Example
Black
B1BLK
ZG2500-4B1BLK Hard anodizing - Black
Red
B1RED
ZG2500-4B1RED Hard anodizing - Red
Copyright 2012
Page 12
See www.skybolt.com for current revision
Rev 012614
Skybolt CLoc® 2000 Series Rivet Receptacles
Standard SK212 Fixed Depth Receptacles
SK212-10
SK212-10
SK212-12
Material
TypeFinish
Rivet Size
Weight
Steel
Machined/Zinc
3/32
.0100/4.5g
SK212-12
Material
Type/Finish
Rivet Size
Weight
Steel
Machined/Zinc
3/32
.0105/4.8g
Cast/None
SK212-10A
Alum6061 Machined/None
3/32
.0030/1.4
SK212-12ACA
Alum380
SK212-10AB
Alum6061 Machined/Anod
3/32
.0030/1.4
SK212-12A
SK212-10S
Stain303 Machined/None
3/32
.0100/4.5
SK212-12A8CA
Alum380
1/8
.0040/1.9
SK212-12A8
1/8
.0035/1.7
* SK212-12AC
Alum6061
Anti Chafe
1/8
.0040/1.8
* SK212-12AC2
Alum6061
Anti Chafe
1/8
.0040/1.8
SK212-12S
Stain303
Machined/None
3/32
.0105/4.8
Cast/None
3/32
.0040/1.9
3/32
.0035/1.7
* Anti-Chafe - Prevents wire from contacting any moving parts
SK213 Adjustable Receptacles
Standard Adjustable Depth Receptacles
Material
Finish
Rivet Size
Weight
L
SK213-1
Skytanium Machined/None
3/32
.0070/3.2 .410
SK213-1S
Stain303
Machined/None
3/32
.0155/7.1 .410
SK213-2
3/32
.0070/3.2 .530
SK213-2D
3/32csk
.0070/3.2 .530
SK213-26D
3/32csk
.0070/3.2 .530
SK213-28
1/8
.0070/3.2 .530
SK213-28D
1/8csk
.0070/3.2 .530
SK213-2 (3/32 Rivet holes)
SK213-28 (1/8 Rivet Holes)
Note: SK213-26 has 11/16 Rivet Spacing
Copyright 2014
Page 13
Rev 052914
Skybolt CLoc® 2000 Series Floating Receptacles
SK201 and SK203 Floating Receptacles
Rivet - 3/32 and Bonded Versions
Fixed Depth and Adjustable Versions
Float +/- .050 (x and y)
Removable - Replacable Insert
Cage Dimensions - 1.020 x .630
Panel Overlap - Max Float - Desired .650
New for 2014 - Easy install Insert Locking Clip - Easy to remove; easy to install/replace
SK201 Foating Receptacle - Fixed Depth
Fixed Depth
Insert
Rivet/
Spacing
Height
Lbs
Grams
Grip(1)
Grip(1)
SK28S3-2
SK26S51-2
Cage
Insert
SK201C01
Stainless
Stainless
Bonded
.490
.0180
8.2
.030-.059
.060-.089
SK201C21
Stainless
Stainless
3/32x.75
.490
.0180
8.2
.030-.059
.060-.089
SK201C01A
Stainless
Aluminum
Bonded
.490
.0110
5.9
.030-.059
.060-.089
SK201C21A
Stainless
Aluminum
3/32x.75
.490
.0110
5.9
.030-.059
.060-.089
SK201A01A
Aluminum
Aluminum
Bonded
.490
.0095
4.3
.030-.059
.060-.089
SK201A21A
Aluminum
Aluminum
3/32x.75
.490
.0095
4.3
.030-.059
.060-.089
Note 1: Add or subtract .030 to grip values per dash number increase or decrease
SK203 Foating Receptacle - Adjustable Depth
Adjustable Depth
Insert
Rivet/
Spacing
Grip(2)
Grip(2)
SK28S3-2
SK26S51-2
Cage
Insert
SK203C01
Stainless
Stainless
Bonded
.540
.0260
11.7
.020-.320
.020-.350
SK203C21
Stainless
Stainless
3/32x.75
.540
.0260
11.7
.020-.320
.020-.350
SK203C01A
Stainless
Aluminum
Bonded
.540
.0200
9.1
.020-.320
.020-.350
SK203C21A
Stainless
Aluminum
3/32x.75
.540
.0200
9.1
.020-.320
.020-.350
SK203A01A
Aluminum
Aluminum
Bonded
.540
.0180
8.16
.020-.320
.020-.350
SK203A21A
Aluminum
Aluminum
3/32x.75
.540
.0180
8.16
.020-.320
.020-.350
Note 2: Add or subtract .030 to grip values per dash number increase or decrease. Must have access
to backside to adjust. Note 3: Height will increase when adjusted to thinner panels.
SK201T1 and SK203T1 Bond - Clamping Tool
Secures and seals insert for bond setup and cure
SK201T2 and SK203T2 Bond - Gummy Worm
Secures and seals insert for bond setup and cure
using traditional Gummy Worm - Reusable.
SK203T1 Shown
Copyright 2014
Page 14
Rev 032416
Skybolt CLoc® 2000 Series Threaded Receptacles
SK210/230 Series Rivetless Receptacles - Adjustable Depth
Excellent for any Non-Blind Mounting Application
Ideal for Marine and Industrial Applications
Adjustable Depth
Use thread locking compound to secure insert
All series - In addition to the charted value of .476, allow up to .580
clearance to accomodate the stud nose through it full locking action
travel.
Old Part#
SK209-31S
SK210-30A
SK210-30S
SK210-31A
SK210-31S
SK210-32S
SK230-16A*
SK230-16S*
SK210-3S
Alum,Brass,Plastic
Steel,SS,Iron
Thread-Type
'W'
Drill Hole To(2)
Drill Hole To
Tap
Inner Panel
303 Stainless
3/8-24
.375
21/64
Q
3/8-24
.250 Min
6061 Aluminum
3/8-16
.375
9/32
5/16
Use with SK2000-150 or -312 Nutsert
303 Stainless
3/8-16
9/32
11/32
7/16-20
.375
.438
5/16
6061 Aluminum
25/64
7/16-20
.250 Min
303 Stainless
7/16-20
.438
11/32
25/64
7/16-20
.250 Min
303 Stainless
1/2-13
.496
15/32
27/64
1/2-13
.250 Min
6061 Aluminum
3/8-16 Ext Nose
.375
9/32
5/16
303 Stainless
3/8-16 Ext Nose
.375
9/32
5/16
Material
Minimum (1)
Notes: * Use SK or ZG2500 studs only. Lock threads with Locktite 271 Red (1) To allow full thread length. (2) undersized for tight threads.
Stud Grip Chart (Grip range increased based on insert setting)
SK28S3 Stainless Studs installed into SK210-31S Receptacles
Protruding
Outer Panel
Flush
Outer Panel
Stud (3)
Thickness
Stud (3)
Thickness
SK26S51-1
SK26S51-2
SK26S51-3
SK26S51-4
SK26S51-5
SK26S51-6
SK26S51-7
SK26S51-8
SK26S51-9
SK26S51-10
SK26S51-11
.075-.105
SK27S3-1S
SK27S3-2S
SK27S3-3S
SK27S3-4S
SK27S3-5S
SK27S3-6S
SK27S3-7S
SK27S3-8S
SK27S3-9S
SK27S3-10S
SK27S3-11S
.010-.019
.105-.135
.135-.165
.165-.195
.195-.225
.225-.255
.255-.285
.285-.315
.315-.345
.345-.375
.375-.405
.020-.049
.050-.079
.080-.109
.110-.139
.140-.169
.170-.199
.200-.229
.230-.259
.260-.289
.290-.319
(3) Charts also apply to all S K2600 Series and SK2700/2800 Series Studs.
Copyright 2016
Page 15
Rev 040616
Skybolt CLoc® 2000 Series Nutserts
SK2000-150 and SK2000-312 Nutserts
Excellent for any Blind or Non-Blind Mounting Application
Ideal Industrial Applications
Use SK210-30S or SK230-16S Inserts - Patent Pending
SK2000-150
SK2000-312
L
Material
Body
L
Dia
Length
Grip
Hole Size
Flange
Dia
L (Protrusion)
Thickness
Installed (max)
SK2000-150
SK2000-150A
SK2000-312
Steel-Yellow Zinc
17/32-9/16
.027-.150
.530
.690
.685
.035
.470
Aluminum
17/32-9/16
.027-.150
.150-.312
.035
.035
.470
17/32-9/16
.690
.805
.685
Steel-Yellow Zinc
.530
.530
SK2000-NST
Nutsert Installation Tool
.685
.425
Use 271 Red Locktite® to lock threads when properly adjusted. Warning: Thread lockers set up in approximately 5 minutes. 2600 Series: Adjust insert
so that the face of the cup is flush with the bottom of the stud head. 2700/2800 Series: Set insert so that the stud head is no deeper than flush with the face
of the cup. If insert is set to deep with the stud locked, you will not be able to unlock the stud after 5 minutes.
Stud Grip Chart - SK210-30 Insert
Protruding
Outer Panel
Stud (4)
SK26S51-1
SK26S51-2
SK26S51-3
SK26S51-4
SK26S51-5
SK26S51-6
SK26S51-7
SK26S51-8
SK26S51-9
SK26S51-10
SK26S51-11
Stud Grip Chart - SK230-16 Insert
Flush
Outer Panel
Thickness
Stud (4)
.020-.300
SK27S3-1S
SK27S3-2S
SK27S3-3S
SK27S3-4S
SK27S3-5S
SK27S3-6S
SK27S3-7S
SK27S3-8S
SK27S3-9S
SK27S3-10S
SK27S3-11S
.020-.330
.130-.360
.160-.360
.190-.420
.220-.450
.250-.480
.280-.510
.310-.540
.340-.570
.370-.600
Protruding
Outer Panel
Thickness
Stud (4)
.020-.170
SK26S51-1
SK26S51-2
SK26S51-3
SK26S51-4
SK26S51-5
SK26S51-6
SK26S51-7
SK26S51-8
SK26S51-9
SK26S51-10
SK26S51-11
.020-.200
.020-.230
.100-.260
.130-.290
.160-.320
.190-.350
.220-.380
.250-.410
.280-.440
.310-.470
Flush
Outer Panel
Thickness
Stud (4)
Thickness
.390-.600
SK27S3-1S
SK27S3-2S
SK27S3-3S
SK27S3-4S
SK27S3-5S
SK27S3-6S
SK27S3-7S
SK27S3-8S
SK27S3-9S
SK27S3-10S
SK27S3-11S
.310-.470
.390-.630
.430-.660
.460-.690
.490-.720
.520-.750
.550-.780
.580-.810
.610-.840
.640-.870
.670-.900
.340-.500
.370-.530
.400-.560
.430-.590
.460-.620
.490-.650
.520-.680
.550-.710
.580-.740
.610-.770
(4) Charts also apply to all SK2600 Series and SK2700/2800 Series Studs.
Copyright 2016
Page 16
Rev 040616
SK220 Series Rivetless Receptacles - Straight Flange
Non-Adjustable Depth
Use thread locking compound to secure nut
SK220-1 Series (SK/ZG2500 Studs Only)
.438
SK220-2 and SK220-3 Series
.094
SK220-1N
Nut-(Steel)
Included
3/8-32
SK220-2N
Nut-(Steel)
Included
W
W
15/32-32 for Nut (-2
Only)
1/2-13 for tap
(-3 only)
Min-Max
Replaces
SK220-1A (1)
SK220-2A
SK220-2S
SK220-3S (2)
SK211-2S
Material
Thread-Type
'W'
Drill Hole To
Tap
Inner Panel
6061 Aluminum
3/8-32 with Backing Nut
6061 Aluminum
.370
3/8
NA
.010-.250
.472
15/32
NA
303 Stainless
.010-.250
.472
15/32
NA
303 Stainless
.010-.250
1/2-13 Tapped (No Backing Nut)
.500
13/32 (3)
1/2-13
.500 Min
(1) Min Total Thickness .045. (2) Course thread for tapped holes in wood/plasic/composite structures. (3) Drill Undersize.
SK220-1 Stud Grip Chart
Protruding
Outer Panel
Flush
SK220-2 Stud Grip Chart
Outer Panel
Protruding
Stud
Thickness
Stud
Thickness
Stud
SK25S51-1
SK25S51-2
SK25S51-3
SK25S51-4
SK25S51-5
SK25S51-6
SK25S51-7
SK25S51-8
SK25S51-9
SK25S51-10
SK25S51-11
.075-.104
.105-.134
.135-.164
.165-.194
.195-.224
.225-.254
.255-.284
.285-.314
.315-.344
.345-.374
.375-.404
SK25S3-1S
SK25S3-2S
SK25S3-3S
SK25S3-4S
SK25S3-5S
SK25S3-6S
SK25S3-7S
SK25S3-8S
SK25S3-9S
SK25S3-10S
SK25S3-11S
.045-.074
.075-.104
.105-.134
.135-.164
.165-.194
.195-.224
.225-.254
.255-.284
.285-.314
.315-.344
.345-.374
SK26S51-1
SK26S51-2
SK26S51-3
SK26S51-4
SK26S51-5
SK26S51-6
SK26S51-7
SK26S51-8
SK26S51-9
SK26S51-10
SK26S51-11
Copyright 2016
Page 17
Outer Panel
Flush
Thickness
Stud
.030-.059 SK28S3-1S
.060-.089 SK28S3-2S
.090-.119 SK28S3-3S
.120-.149 SK28S3-4S
.150-.179 SK28S3-5S
.180-.209 SK28S3-6S
.210-.239 SK28S3-7S
.240-.269 SK28S3-8S
.270-.299 SK28S3-9S
.300-.329 SK28S3-10S
.330-.359 SK28S3-11S
Outer Panel
Thickness
.010-.019
.020-.049
.050-.079
.080-.109
.110-.139
.140-.169
.170-.199
.200-.229
.230-.259
.260-.289
.290-.319
Rev 040616
SK221 Series Rivetless Receptacles - Countersunk Flange
Non-Adjustable Depth
Use thread locking compound to secure nut
.500
.160
.064
W
W
15/32-32 for Nut
1/2-13 for Tap
Min-Max
Replaces
SK221-2A
SK221-2S
SK221-3S*
Material
'W'
Drill Hole To
Tap
Inner Panel
.472
15/32
NA
.090-.250
303 Stainless
.472
15/32
NA
.090-.250
303 Stainless
1/2-13 Tapped (No Backing Nut)
.500
13/32 (1)
1/2-13
.500 Min
SK211-32A 6061 Aluminum
SK210-2S
Thread-Type
* Course thread for tapped holes in wood/plasic/composite structures
Stud Grip Chart
SK220-2N Nut- Steel - Bright Zinc Plated
(Included with SK220-2 Series Receptacles)
Protruding
Outer Panel
Flush
Outer Panel
Stud
Thickness
Stud
Thickness
SK26S51-1
SK26S51-2
SK26S51-3
SK26S51-4
SK26S51-5
SK26S51-6
SK26S51-7
SK26S51-8
SK26S51-9
SK26S51-10
SK26S51-11
.030-.059
.060-.089
.090-.119
.120-.149
.150-.179
.180-.209
.210-.239
.240-.269
.270-.299
.300-.329
.330-.359
SK28S3-1S
SK28S3-2S
SK28S3-3S
SK28S3-4S
SK28S3-5S
SK28S3-6S
SK28S3-7S
SK28S3-8S
SK28S3-9S
SK28S3-10S
SK28S3-11S
.010-.019
.020-.049
.050-.079
.080-.109
.110-.139
.140-.169
.170-.199
.200-.229
.230-.259
.260-.289
.290-.319
Notes: (1) Drill slightly undersized for "tight" thread tap.
Copyright 2016
Page 18
Rev 040616
Skybolt ® MS21078 Platenuts
Nylon Insert Platenuts - 6061 Aluminum - Steel
Lightweight - Equivalent to Allmetal-Crimp Nuts
Will not gall screw threads like allmetal platenuts
Adds structure to panel
Precision machined
Example Part #s
MS21078-3 12L14 Steel ASTM A29, A108 - Yellow Zinc plate
MS21078-3A 6061 T651 Aluminum ASTM B221-12 - No plating
Lbs
MS21078
Marking
AN366
NAS1032
MS21078-04
4
NA
NAS1023N04
MS21078-06
6
AN366-F632A
MS21078-08
2 or 8
MS21078-3
3
MS21078-3-8
3
NA
NA
MS21078-324
Grams
Alum
Alum
#440 3/32 Rivets 11/16 Spacing 750 Axial Load
.0035
1.587
NAS1023N06
.0035
1.587
AN366-F832A
NAS1023N08
.0035
1.587
AN366-F1032A
NAS1023N3
#10-32 3/32 Rivets 11/16 Spacing 2460 Axial Load
.0035
1.587
.0035
1.587
34
.0035
1.587
MS21078-324-8
34
.0035
1.587
MS21078-420-8S
20
1/4-20 1/8 Rivets 11/16 Spacing(S) 4580 Axial Load
.0045
2.041
MS21078-420-8L
20
1/4-20 1/8 Rivets 1.00 Spacing(L) 4580 Axial Load
.0045
2.041
MS21078-428-L
28
AN366-F428A
NAS1023N4
.0055
2.041
MS21078-428-8S
28
NA
NA
.0055
2.041
.0055
2.041
NA
NA
MS21078-428-8L
28
NA
NA
Bold indicates normally stocked in steel. Shaded indicates normally stocked in aluminum.
Part#
A
B
H
D
MS21078-04
.970
.404
.215
.373
MS21078-06
.970
.404
.255
.373
MS21078-08
.970
.404
.285
.373
MS21078-3
.970
.404
.295
.373
MS21078-3-8
.970
.406
.295
.373
MS21078-324
.970
.406
.295
.373
MS21078-324-8
.970
.406
.295
.373
MS21078-420-8S
.970
.406
.295
.373
MS21078-420-8L
1.296
.516
.250
.465
.465
MS21078-428-L
1.296
.516
.250
MS21078-428-8S
.970
.406
.250
.465
MS21078-428-8L
1.296
.516
.250
.465
Copyright 2016
Page 19
Rev 101814
Skybolt CLoc® SK4000 and ZG4000 Series
4 - Piece Series (Stud/Retainer - Grommet - Locking Receptacle)
1050 LB Ultimate Tensile Strength (Steel and CLoc® Stainless) NASM5591 and MIL-STD-810G Certified
900 LB Ultimate Tensile Strength (ZG4000 Skytanium®) TSO-C148 Certified
STUDS
3/8" Head Diameter - All Studs
Note: Stud sizes thru -15 are self
retaining in grommet. Studs require
4P3 Pliers to insert thru grommet.
40S5 Steel
SK40S5-( )S Stainless
4002 Steel*
SK4002-( )S Stainless (Collared Slot)
ZG4002 ( ) Skytanium® (Collared Slot)
Stud Dash Number
Stamped in Head
Use 4P3 Pliers to insert stud through grommet
Panel (P) Drill to 15/32"
GROMMETS
See Chart 1 for Specs
Standard
Plus Flush
Grommets
-orSee Chart 1 for Specs
Standard Flush
Grommets
4002-( )W Steel
SK4002-( )SW Stainless
SK-N2 Steel
SK-N2S Stainless
SK-N
Drill to 1/2"
Extended Depth
SK-O18
Steel
Grommets
SK-O316
Steel
Steel
SK-NS Stainless
SK-O
Steel
SK-OS Stainless
ZG-094 Skytanium®
Panel (P) Drill to 15/32" (140deg Countersunk))
SK-G Steel
SK-GS Stainless
SK-H
SK-HS
SK-O14
SK-O18S
SK-O316S
SK-O14S
Steel
Stainless
Stainless
Stainless
Steel
Stainless
-orPanel (P) Drill to 15/32"
Grommet Retainers
See Chart 1 for Specs
Wide Flange
Grommets
RECEPTACLES
SK-N3
SK-N3S
SK-N316S
ZG-094LA
ZG-125LA
ZG-187LA
Steel
Stainless
Stainless
Skytanium®
Skytanium®
Skytanium®
R4G Grommet Retainer
R4T High Shear Grommet Retainer
SK-R531 Backing Washer
(for Oversize Holes)
Use T26 Tool to install Retainers
Drill center hole to 5/8"
Support
Panel (F)
Height = .5625"
Rigid Receptacle
214-16 Steel
214-16D Dimpled
SK215-4 Adjustable
1/8" Rivets
Copyright 2014
Page 20
Floating Receptacle
244-16 Steel
244-16D Dimpled
SK244-161 Fixed
SK245-161 Adjustable
Rev 040616
Skybolt CLoc® 4000 Series Common Sets
Forget Charts - The followings assemblies solve 99% of all applications
SK40S5S
ZG4002
Stainless Series
SK40S5S-SET1
Total
Skytanium® Series
ZG4002-SET1
Total
Grip Range
SK40S5-2S Phillips Head
SK-OS Panel Grommet (.094 max thickness)
SK-R4G Stud/Grommet Retainer
SK245-4 Adjustable Receptacle 1/8” Rivets
.010 - .310
Grip Range
ZG4002-2 Collared Slot
ZG-094LA Panel Grommet (.094 max thickness)
SK-R4G Stud/Grommet Retainer
SK245-4 Adjustable Receptacle 1/8” Rivets
.010 - .310
Note (1)
Note (2)
Note 1 - OS Grommet Restrictions - Max Outer Panel Thickness = .094
Note 2 - See Dimension 'B' and 'C' below for minimum panel clearance and Overlap for SK245-4 Receptacle
What does Overlap Mean? Work from the Inner Panel Out (Choose receptacle then grommet),
then determine location of pilot hole.
Pilot Hole
Either B Minimum* = .311(G,H,N,O), .375(O94LA), .438(N3 Series)
B
B
Outer Panel
C
C = Minimum Panel Overlap = A Minimum x 2
Recommended .500 + A Minimum
Inner Panel
A
A
Either A Minimum* = .355 (SK214/SK215 Series Receptacle) - or .434 (SK244/SK245 Series Receptacle)
*Minimums reflect part dimensions in a perfect world installation.
Installation Tools
4P3-T26 Tools Tools to install studs through grommets and install grommet retainers
Template-215
Template to drill rivet holes with #30 Drill
Template-245
Template to expand center hole with Unibit-3 Stepdrill
Copyright 2016
Page 21
Rev 032416
Skybolt CLoc® SK4000, ZG4000 Series
Stainless, Stainless Diamondhead ™ & Skytanium ®
Industry Standard Heavy Duty 1/4-Turn Panel Fastener Series
TSO-C148 Approved. Tested to NASM5591 & MIL-STD-810G
Tensile/Shear Loads of 700 LBS Working - 1050 Lbs Ultimate
SK4002 Collared Slot
ZG4002 Collared Slot
SK4002-[ ]S45 Collared Slot 700°F
SK40S5-[ ] Phillips Head - Hardened Diamondhead®
SK40S5-[ ]S45 Phillips Head 700°F - Hardened Diamondhead®
SK40T5 Torx Head
ZG40T5 Torx Head
Stud Replacement (For New Design, See page 25-26 for Stud Dash#)
Measure 'L' Length .030 Tolerance Note (1)
Stud
Dash#
SK4002
inches
SK40S5
mm
inches
Interchangeable and exceeds Camloc®
mm
Stainless
Stainless
Stainless
Skytanium®
Stainless
Collared
Phillips
#25 Torx
Collared
Collared
Phillips
Slot
Head
Head
Slot
Slot 700°F
Head 700°F
40S45 Series
40S45B Series
4002/4002S Series
40S5/40S5S Series
for (Strength and Corrosion Resistance)
40S41S Series
40S41SC Series
Interchangeable and exceeds Monadnock®
1142002 Series
1142012 Series
for (Strength and Corrosion Resistance)
-0
.620
15.75
.620
15.75
SK4002-0S
-1
.650
16.51
.650
16.51
SK4002-1S
-2
.680
17.27
.680
17.27
SK4002-2S
-3
.710
18.03
.710
18.03
SK4002-3S
-4
.740
18.80
.740
18.80
SK4002-4S
-5
.770
19.56
.770
19.56
SK4002-5S
-6
.800
20.32
.800
20.32
SK4002-6S
-7
.830
21.08
.830
21.08
SK4002-7S
-8
.860
21.84
.860
21.84
SK4002-8S
-9
.890
22.61
.890
22.61
SK4002-9S
-10
.920
23.37
.920
23.37
SK4002-10S
-11
.950
24.13
.950
24.13
SK4002-11S
-12
.980
24.89
.980
24.89
SK4002-12S
-13
1.010
25.65
1.010
25.65
SK4002-13S
-14
1.040
26.42
1.040
26.42
SK4002-14S
-15
1.070
27.18
1.070
27.18
SK4002-15S
-16
1.100
27.94
1.100
27.94
SK4002-16S
-17
1.130
28.70
1.130
28.70
SK4002-17S
-18
1.160
29.46
1.160
29.464
SK4002-18S
-19
1.190
30.23
1.190
30.226
SK4002-19S
-20
1.220
30.99
1.220
30.988
SK4002-20S
Dash Numbers Continue (add .030 to numbers listed above)
1142026 Series
SK40S5-0S
SK40S5-1S
SK40S5-2S
SK40S5-3S
SK40S5-4S
SK40S5-5S
SK40S5-6S
SK40S5-7S
SK40S5-8S
SK40S5-9S
SK40S5-10S
SK40S5-11S
SK40S5-12S
SK40S5-13S
SK40S5-14S
SK40S5-15S
SK40S5-16S
SK40S5-17S
SK40S5-18S
SK40S5-19S
SK40S5-20S
Stainless
1142024 Series
SK40T5-0
SK40T5-1
SK40T5-2
SK40T5-3
SK40T5-4
SK40T5-5
SK40T5-6
SK40T5-7
SK40T5-8
SK40T5-9
SK40T5-10
SK40T5-11
SK40T5-12
SK40T5-13
SK40T5-14
SK40T5-15
SK40T5-16
SK40T5-17
SK40T5-18
SK40T5-19
SK40T5-20
ZG4002-0
ZG4002-1
ZG4002-2
ZG4002-3
ZG4002-4
ZG4002-5
ZG4002-6
ZG4002-7
ZG4002-8
ZG4002-9
ZG4002-10
ZG4002-11
ZG4002-12
ZG4002-13
ZG4002-14
ZG4002-15
ZG4002-16
ZG4002-17
ZG4002-18
ZG4002-19
ZG4002-20
SK4002-0S45
SK4002-1S45
SK4002-2S45
SK4002-3S45
SK4002-4S45
SK4002-5S45
SK4002-6S45
SK4002-7S45
SK4002-8S45
SK4002-9S45
SK4002-10S45
SK4002-11S45
SK4002-12S45
SK4002-13S45
SK4002-14S45
SK4002-15S45
SK4002-16S45
SK4002-17S45
SK4002-18S45
SK4002-19S45
SK4002-20S45
SK40S5-0S45
SK40S5-1S45
SK40S5-2S45
SK40S5-3S45
SK40S5-4S45
SK40S5-5S45
SK40S5-6S45
SK40S5-7S45
SK40S5-8S45
SK40S5-9S45
SK40S5-10S45
SK40S5-11S45
SK40S5-12S45
SK40S5-13S45
SK40S5-14S45
SK40S5-15S45
SK40S5-16S45
SK40S5-17S45
SK40S5-18S45
SK40S5-19S45
SK40S5-20S45
Note (1) Chart is accurate for industry standard (Camloc) studs. Skybolt SK4002 stud lengths are the same as SK40S5 studs
Copyright 2016
Page 22
091213
Skybolt CLoc® 4000 Series Stud Weights
SK4002
Skytanium®
SK40S5
-0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
Lbs
.0090
.0090
.0095
.0100
.0105
.0110
.0120
.0130
.0135
.0140
.0150
.0155
.0165
.0170
.0175
.0185
Grams
4.0823
4.0823
4.3091
4.5359
4.7627
4.9895
5.4431
5.8967
6.1235
6.3503
6.8039
7.0307
7.4843
7.7111
7.9379
8.3915
SK4002W
Lbs
Grams
6.5771
7.0307
7.2575
7.4843
7.9379
8.3915
8.6183
8.8451
9.2986
9.5254
9.9790
10.2058
10.4326
10.8862
ZG4002
-0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
Lbs
0.0045
0.0045
0.0045
0.0047
0.0050
0.0055
0.0060
0.0065
0.0067
0.0069
0.0074
0.0077
0.0082
0.0084
0.0087
0.0092
Grams
2.0263
2.0263
2.0414
2.1321
2.2682
2.4950
2.7219
2.9487
3.0394
3.1520
3.3772
3.4897
3.7149
3.8275
3.9400
4.1652
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
0.0145
0.0155
0.0160
0.0165
0.0175
0.0185
0.0190
0.0195
0.0205
0.0210
0.0220
0.0225
0.0230
0.0240
-16
-17
-18
-19
-20
-21
-22
-23
-24
-25
-26
-27
-28
-29
-30
-31
-32
-33
-34
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-46
-47
-48
-49
-50
.0130
.0132
.0135
.0137
.0139
.0142
.0144
.0146
.0149
.0151
.0153
.0156
.0158
.0160
.0162
.0165
.0168
.0170
.0172
.0175
.0177
.0179
.0182
.0184
.0186
.0189
.0191
.0193
.0196
.0198
.0200
.0203
.0205
.0208
.0210
5.8967
5.9874
6.1235
6.2142
6.3049
6.4410
6.5317
6.6224
6.7585
6.8492
6.9400
7.0760
7.1668
7.2575
7.3482
7.4843
7.6204
7.7111
7.8018
7.9379
8.0286
8.1193
8.2554
8.3461
8.4368
8.5729
8.6636
8.7543
8.8904
8.9811
9.0718
9.2079
9.2986
9.4347
9.5254
-16
-17
-18
-19
-20
-21
-22
-23
-24
-25
-26
-27
-28
-29
-30
-31
-32
-33
-34
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-46
-47
-48
-49
-50
0.0185
0.0187
0.0190
0.0192
0.0194
0.0197
0.0199
0.0201
0.0204
0.0206
0.0208
0.0211
0.0213
0.0215
0.0217
0.0220
0.0223
0.0225
0.0227
0.0230
0.0232
0.0234
0.0237
0.0239
0.0241
0.0244
0.0246
0.0248
0.0251
0.0253
0.0255
0.0258
0.0260
0.0263
0.0265
8.3915
8.4822
8.6183
8.7090
8.7997
8.9358
9.0265
9.1172
9.2533
9.3440
9.4347
9.5708
9.6615
9.7522
9.8430
9.9790
10.1151
10.2058
10.2965
10.4326
10.5233
10.6141
10.7501
10.8409
10.9316
11.0677
11.1584
11.2491
11.3852
11.4759
11.5666
11.7027
11.7934
11.9295
12.0202
-16
-17
-18
-19
-20
-21
-22
-23
-24
-25
-26
-27
-28
-29
-30
-31
-32
-33
-34
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-46
-47
-48
-49
-50
0.0065
0.0066
0.0067
0.0068
0.0069
0.0070
0.0072
0.0073
0.0074
0.0075
0.0076
0.0077
0.0079
0.0080
0.0081
0.0082
0.0083
0.0084
0.0086
0.0087
0.0088
0.0089
0.0090
0.0091
0.0093
0.0094
0.0095
0.0096
0.0097
0.0098
0.0100
0.0101
0.0102
0.0103
0.0104
2.9269
2.9798
3.0327
3.0856
3.1385
3.1914
3.2443
3.2972
3.3501
3.4031
3.4560
3.5089
3.5618
3.6147
3.6676
3.7205
3.7734
3.8263
3.8792
3.9321
3.9851
4.0380
4.0909
4.1438
4.1967
4.2496
4.3025
4.3554
4.4083
4.4612
4.5141
4.5671
4.6200
4.6729
4.7258
Note: -16 On Studs use -3 Cups. Must use SK-40RS Retainers (.0026Lbs/1.1795g per 10 pieces)
Weights are for Steel and Stainless or Skytanium as noted.
Copyright 2013
Page 23
Refer wo www.skybolt.com for current revision
Rev 032416
Skybolt CLoc® SK4002 W, R, FW Series
Stainless
Industry Standard Heavy Duty 1/4-Turn Panel Fastener Series
SK 4000 Series TSO-C148 Approved. (SK4002SFW TSO Pending)
SK4002W Series
SK4002R Series
SK4002SFW Series
US Patent Pending
Stud Replacement
(For New Design, See next page for Stud Dash#)
Measure 'L' Length .030 Tolerance
Stud
SK4002W
SK4002R
SK4002FW
Stainless
Stainless
Stainless
4002W Series
4002R Series
4002SFW Series
Dash#
inches
mm
inches
mm
inches
mm
Winged
Folding Ring
Folding Wing
-2
.680
17.27
.835
21.21
0.920
23.37
SK4002-2SW
SK4002-2SR
SK4002-2SFW
-3
.710
18.03
.865
21.97
0.950
24.13
SK4002-3SW
SK4002-3SR
SK4002-3SFW
-4
.740
18.80
.895
22.73
0.980
24.89
SK4002-4SW
SK4002-4SR
SK4002-4SFW
-5
.770
19.56
.925
23.50
1.010
25.65
SK4002-5SW
SK4002-5SR
SK4002-5SFW
-6
.800
20.32
.955
24.26
1.040
26.42
SK4002-6SW
SK4002-6SR
SK4002-6SFW
-7
.830
21.08
.985
25.02
1.070
27.18
SK4002-7SW
SK4002-7SR
SK4002-7SFW
-8
.860
21.84
1.015
25.78
1.100
27.94
SK4002-8SW
SK4002-8SR
SK4002-8SFW
-9
.890
22.61
1.045
26.54
1.130
28.70
SK4002-9SW
SK4002-9SR
SK4002-9SFW
-10
.920
23.37
1.075
27.31
1.160
29.46
SK4002-10SW
SK4002-10SR
SK4002-10SFW
-11
.950
24.13
1.105
28.07
1.190
30.23
SK4002-11SW
SK4002-11SR
SK4002-11SFW
-12
.980
24.89
1.135
28.83
1.220
30.99
SK4002-12SW
SK4002-12SR
SK4002-12SFW
-13
1.010
25.65
1.165
29.59
1.250
31.75
SK4002-13SW
SK4002-13SR
SK4002-13SFW
-14
1.040
26.42
1.195
30.35
1.280
32.51
SK4002-14SW
SK4002-14SR
SK4002-14SFW
-15
1.070
27.18
1.225
31.12
1.310
33.27
SK4002-15SW
SK4002-15SR
SK4002-15SFW
-16
1.100
27.94
1.255
31.88
1.340
34.04
SK4002-16SW
SK4002-16SR
SK4002-16SFW
-17
1.130
28.70
1.285
32.64
1.370
34.80
SK4002-17SW
SK4002-17SR
SK4002-17SFW
-18
1.160
29.46
1.315
33.401
1.400
35.56
SK4002-18SW
SK4002-18SR
SK4002-18SFW
-19
1.190
30.23
1.345
34.163
1.430
36.32
SK4002-19SW
SK4002-19SR
SK4002-19SFW
-20
1.220
30.99
1.375
34.925
1.460
37.08
SK4002-20SW
SK4002-20SR
SK4002-20SFW
-21
31.75
1.490
37.85
SK4002-21SW
SK4002-21SR
SK4002-21SFW
32.51
1.405
1.435
35.687
-22
1.250
1.280
36.449
1.520
38.61
SK4002-22SW
SK4002-22SR
SK4002-22SFW
-23
1.310
33.27
1.465
37.211
1.550
39.37
SK4002-23SW
SK4002-23SR
SK4002-23SFW
-24
1.340
34.04
1.495
37.973
1.580
40.13
SK4002-24SW
SK4002-24SR
SK4002-24SFW
Copyright 2016
Page 24
Rev 060812
Skybolt CLoc® SK4000, ZG4000, SK5000 Series
New Design Stud Selection with Non-Adjusting Receptacles
When Using SK214 and SK244 Series Non-Adjustable Receptacles
1) Enter Chart with Grommet Style Selected
2) Enter Chart Column with Receptacle Type Selected
3) Determine Target Stud Length
Flush Grommets
Plus Flush Grommets
SK-G,H
'G'
Non-Floating Rec
Floating Rec
Non-Floating Rec
Floating Rec
Total Thickness
SK214 Series
SK244 Series
SK214 Series
SK244 Series
inches
Min
SK-NSG,N2,N,O,N3
Max
mm
Min
Target Dash Number for SK4002, SK40S5, and SK5000 Series Studs
Max
STUD DASH#
STUD DASH#
Ulta Thin
NA
-0*
-2
-1*
-3
.020
.050
0.51
1.27
NA
.051
.080
1.30
2.032
NA
-2
-2
-4
.081
.110
2.06
2.794
-2
-3
-3
-5
.111
.140
2.82
3.556
-3
-4
-4
-6
.141
.170
3.58
4.318
-4
-5
-5
-7
.171
.200
4.34
5.08
-5
-6
-6
-8
.200
.230
5.08
5.842
-6
-7
-7
-9
.231
.260
5.87
6.604
-7
-8
-8
-10
.261
.290
6.63
7.366
-8
-9
-9
-11
.291
.320
7.39
8.128
-9
-10
-10
-12
.321
.350
8.15
8.89
-10
-11
-11
-13
.351
.380
8.92
9.652
-11
-12
-12
-14
.381
.410
9.68
10.414
-12
-13
-13
-15
.411
.440
10.44
11.176
-13
-14
-14
-16
.441
.470
11.20
11.938
-14
-15
-15
-17
.471
.500
11.96
12.7
-15
-16
-16
-18
.501
.530
12.73
13.462
-16
-17
-17
-19
.531
.560
13.49
14.224
-17
-18
-18
-20
.561
.590
14.25
14.986
-18
-19
-19
-21
.591
.620
15.01
15.748
-19
-20
-20
-22
.621
.650
15.77
16.51
-20
-21
-21
-23
.651
.680
16.54
17.27
-21
-22
-22
-24
.681
.710
17.30
18.03
-22
-23
-23
-25
.711
.740
18.06
18.80
-23
-24
-24
-26
.741
.770
18.82
19.56
-24
-25
-25
-27
.771
.800
19.58
20.32
-25
-26
-26
-28
.801
.830
20.35
21.08
-26
-27
-27
-29
.831
.860
21.11
21.84
-27
-28
-28
-30
.861
.890
21.87
22.61
-28
-29
-29
-31
.891
.920
22.63
23.37
-29
-30
-30
-32
*Use SK-NG Series Grommets Only
Copyright 2012
Page 25
Some Parts#s Special Order Only
Rev 032416
Skybolt CLoc® SK4000, ZG4000, SK5000 Series
New Design Stud Selection with Adjusting Receptacles
When Using SK215 and SK245 Series Adjustable Receptacles
1) Enter Chart with Grommet Style Selected
2) Determine Target Stud Length
Note: One CLoc® Stud can cover the equivalent of 10 Stud lengths when using the SK215 or SK245 Receptacles.
Flush Grommets
Plus Flush Grommets
SK-G,H
SK-NSG,N2,N,O,N3
G'
Total Thickness
inches
mm
Target Dash Number for SK4002, SK40S5, and SK5000 Series Studs
Min
Max
Min
Max
STUD DASH#
STUD DASH#
.010
.310
0.25
7.874
-1
-2
.040
.340
1.02
8.636
-2
-3
.070
.370
1.78
9.398
-3
-4
.100
.400
2.54
10.16
-4
-5
.130
.430
3.30
10.922
-5
-6
.160
.460
4.06
11.684
-6
-7
.190
.490
4.83
12.446
-7
-8
.220
.520
5.59
13.208
-8
-9
.250
.550
6.35
13.97
-9
-10
.280
.580
7.11
14.732
-10
-11
.310
.610
7.87
15.494
-11
-12
.340
.640
8.64
16.256
-12
-13
.370
.670
9.40
17.018
-13
-14
.400
.700
10.16
17.78
-14
-15
.430
.730
10.92
18.542
-15
-16
.460
.760
11.68
19.304
-16
-17
.490
.790
12.45
20.066
-17
-18
.520
.820
13.21
20.828
-18
-19
.550
.850
13.97
21.59
-19
-20
.580
.880
14.73
22.352
-20
-21
.610
.910
15.49
23.114
-21
-22
.640
.940
16.26
23.88
-22
-23
.670
.970
17.02
24.64
-23
-24
.700
1.000
17.78
25.40
-24
-25
.730
1.030
18.54
26.16
-25
-26
.760
1.060
19.30
26.92
-26
-27
.790
1.090
20.07
27.69
-27
-28
.820
1.120
20.83
28.45
-28
-29
.850
1.150
21.59
29.21
-29
-30
.880
1.180
22.35
29.97
-30
-31
Copyright 2016
Page 26
Rev 012715
Skybolt CLoc® SK4000 Series Flush Grommets
Standard Grommets (For Panels up to .117)
'G' Series - Panels to .074 Thickness
Replace AirlocII 1142900-1
'H' Series - Panels to .117 Thickness
SK40G1 High Shear Series
Replace AirlocII 1142909
Flush Grommets require 140 countersunk panels. Standard flush grommets are available in two thickness ranges, G for panels up to .074, and H for panels up to
.117 in thickness. Many production aircraft installations used Flush Grommets.
Engineering Data for Flush Series CLoc® Grommets (Chart 1)
Steel
Grommet#
SK-G
SK40G1-5
SK40G1-8
SK-H
Stainless
Grommet#
SK-GS
SK40G1-5S
SK40G1-8S
SK-HS
A
.065
.092
B
.066
.066
A
.065
.092
B
.066
.066
Type
Material
Flush
Flush - High Shear
Flush - High Shear
Flush
Steel
Steel
Steel
Steel
TSO-C148
Type
Material
Flush
Flush - High Shear
Flush - High Shear
Flush
Stainless
Stainless
Stainless
Stainless
Panel Depth Range
R4G
R4T
Snap Ring
Snap Ring
Up to .074
Up to .065
Up to .092
Up to .117
Up to .058
Up to .051
Up to .051
Up to .101
Panel Depth Range
R4G
R4T
Snap Ring
Snap Ring
Up to .074
Up to .065
Up to .092
Up to .117
Up to .058
Up to .051
Up to .051
Up to .101
Minimum Total Thickness*
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
Skybolt CLoc® components have
no minimum restriction
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
*Industry standard components will jam inside receptacle with minimum thickness applications. Skybolt eliminated this restriction.
Copyright 2015
Page 27
Rev 012715
Skybolt CLoc® SK4000 Series PlusFlush Grommets
Standard Grommets (For Panels up to .094)
Extended Depth Grommets (For Panels .094 to .566)
SK-N Series
SK-N2 Series
SK and ZG Extended Series
L
O
SK-O Series
Skybolt N and O Series Grommets do not require dimpled or countersunk holes . These grommets, however, are almost flush (Plus Flush) so that drag
considerations are minor. Traditional snap ring grommets are restricted in depth by the clearances required to insert the studs through the grommet. The SK-O
Extended Depth Grommets utilize a milled slot in the grommet skirt to allow any stud to be easily inserted or removed while extending the grip range of the
grommet. This is especially useful for thicker panels up through 1/2". The SK-O Extended Depth Grommet eliminates the requirement to back-counterbore holes
in order to install R4G Retainers. This Grommet is the perfect substitution for expensive Flare Retained Grommets
Engineering Data for CLoc® Grommets Plus Flush (Chart 2)
Steel
Grommet#
SK-N2
SK-N
SK-O
SK-O18
SK-316
SK-014
Stainless
Grommet#
SK-N2S
SK-NS
SK-OS
SK-O18S
SK-316S
SK-O14S
SK-O12S
R4T
Snap Ring
Up to .011
Up to .063
.050 to .083
.079 to .130
.131 to .200
.201 to .260
Material
Steel
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Panel Depth Range
R4G
Snap Ring
Up to .025
Up to .079
.066 to .094
.095 to .150
.180 to .213
.221 to .280
.281 to .566
R4T
Snap Ring
Up to .011
Up to .063
.050 to .083
.079 to .134
.164 to .197
.205 to .264
.265 to .550
Type
Material
Panel Depth Range
R4G
Snap Ring
R4T
Snap Ring
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
Plus Flush
Skytanium
.066 to .094
.050 to .078
No minimum
'L'
.184/4.68mm
.197/5.00
.197/5.00
.265/6.73mm
.352/8.94
.428/10.87
Type
Standard
Standard
Standard
Ext Depth
Ext Depth
Ext Depth
'L'
.184/4.68mm
.197/5.00
.197/5.00
.265/6.73
.352/8.94
.42810.87
.680/17.27
TSO-C148
Type
Standard
Standard
Standard
Ext Grip
Ext Depth
Ext Depth
Ext Depth
Skytanium®
Grommet#
ZG-094
Material
Steel
Steel
Steel
Steel
Steel
Steel
Panel Depth Range
R4G
Snap Ring
Up to .025
Up to .079
.066 to .094
.095 to .150
.151 to .220
.221 to .280
'L'
.197
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
Skybolt CLoc® components have no
minimum restriction
.050
.135
.215
.000-.280
.150-.260
.220-.310
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
Skybolt CLoc® components have no
.050
.135
.215
.480
.000-.280
.150-.260
.220-.310
.460-.590
*Lesser thickness allows grommet to jam against inside of receptacle when fastener is locked. SK245-4 Rev B
Copyright 2015
Page 28
Rev 032416
Skybolt CLoc® SKN4 and SK-N114 Series Grommets
Wide Flange (.750) Grommets (For Panel Thickness up to .135)*
.750
SKN4 Series
(Taper Head)
SK-N114 Series
(Flat Head)
The Skybolt SKN4 and SK-114 Grommets are the perfect balance between traditional grommet head size and the large area SK-N3 grommets. Ideal for
"workhorse" aircraft panels. Common to Ag Aircraft.
Notes: *When used with SK-R4GS retainers Grip is less with SK-R4TS retainers. Charted grip ranges are conservative.
SKN4 Series - Taper Face
Grommet#
'L'
Type
Material
Weight
lb/g
SKN4-2
SKN4-3
SKN4-4
SKN4-2S
SKN4-3S
SKN4-4S
Steel
Steel
Steel
Stainless
Stainless
Stainless
.0060/2.7
.0060/2.7
.0070/3.2
.0060/2.7
.0060/2.7
.0070/3.2
.205/5.207
.205/5.207
.241/6.121
.205/5.207
.205/5.207
.241/6.121
Taper Plus Flush
Taper Pluh Flush
Taper Plus Flush
Taper Plus Flush
Taper Plush Flush
Taper Plus Flush
SK-N114 - Flat Face
Grommet#
'L'
Type
Material
Weight
lb/g
SK-N114-2
SK-N114-3
SK-N114-4
SK-N114-2S
SK-N114-3S
SK-N114-4S
Flat Head Plus Flush
Flat Head Pluh Flush
Steel
Steel
Steel
Stainless
Stainless
Stainless
.0060/2.7
.0060/2.7
.0070/3.2
.0060/2.7
.0060/2.7
.0070/3.2
.205/5.207
.205/5.207
.241/6.121
.205/5.207
.205/5.207
.241/6.121
Panel Depth Range
R4G
R4T
Snap Ring
Snap Ring
Up to .065
Up to .094
Up to .135
Up to .065
Up to .094
Up to .135
Up to .053
Up to .078
Up to .113
Up to .053
Up to .078
Up to .113
Panel Depth Range
R4G
R4T
Snap Ring
Snap Ring
Up to .065
Up to .094
Up to .135
Up to .065
Up to .094
Up to .135
Up to .053
Up to .078
Up to .113
Up to .053
Up to .078
Up to .113
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
*Lesser thickness allows grommet to jam against inside of receptacle when fastener is locked. SK245-4 Rev B and subsequent have no restriction
Copyright 2016
Page 28a
Rev 032416
Skybolt CLoc® SK4000 Series Large Area Grommets
and Extended Depth Grommets (For panels from .065 to .546)
SK-N3 Series
Replace AirlocII 1142931
SK-N114-2,-3
Replace AirlocII 114295-2,-3
SK-N318 Series
ZG-LA Series
Skybolt N and O Series Grommets do not require dimpled or countersunk holes . These grommets, however, are almost flush (Plus Flush) so that drag
considerations are minor. Traditional snap ring grommets are restricted in depth by the clearances required to insert the studs through the grommet. The SK-O
Extended Depth Grommets utilize a milled slot in the grommet skirt to allow any stud to be easily inserted or removed while extending the grip range of the
grommet. This is especially useful for thicker panels up through 1/4". The SK-O Extended Depth Grommet eliminates the requirement to back-counterbore holes in
order to install R4G Retainers. This Grommet is the perfect substitution for expensive Flare Retained Grommets
Steel
Grommet#
SK-N3
SK-N318
Stainless
Grommet#
SK-N3S
SK-N318S
SK-N314S
SK-N312S
Skytanium®
Grommet#
ZG-094LA
ZG-125LA
ZG-187LA
ZG-250LA
TSO-C148
'W'/mm
.875/22.23mm
.875/22.23
TSO-C148
'W'/mm
.875/22.23
.875/22.23
.875/22.23
.875/22.23
'W'/mm
.750/19.05mm
.750/19.05
.750/19.05
.750/19.05
'L'/mm
.200/5.08mm
.265/6.73
'L'/mm
.200/5.08
.265/6.73
.428/10.87
.680/17.27
'L'/mm
.200/5.08
.265/6.73
.352/8.94
.428/10.87
Weight
.0075/3.3g
.0070/3.2
Weight
.0075/3.3
.0070/3.2
.0019/4.5
.0135/6.0
Weight
.0015/.7g
.0020/.9
.0025/1.1
.0030/1.3
Material
Steel
Steel
Panel Depth Range
R4G
R4T
Snap Ring
Snap Ring
Up to .079
Up to .063
Up to .159
Up to .143
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
.000
.000-.190
.050
.000-.280
Material
Stainless
Stainless
Stainless
Stainless
Panel Depth Range
R4G
R4T
Snap Ring
Snap Ring
Up to .079
Up to .063
Up to .159
Up to .143
Up to .296
Up to .280
Up to .546
Up to .530
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
.000
.000-.190
.050
.000-.280
.215
.220-.310
.480
.410-.720
Material
Skytanium
Skytanium
Skytanium
Skytanium
Panel Depth Range
R4G
R4T
Snap Ring
Snap Ring
.066 to .094
.050 to .078
.095 to .150
.079 to .130
.180 to .213
.164 to .197
.221 to .280
.201 to .260
SK214-16A
SK215
SK244-16 Rec
SK245* Rec
No minimum
.050
.000-.280
.135
.150-.300
.215
.220-.310
*Lesser thickness allows grommet to jam against inside of receptacle when fastener is locked. SK-N3 length/grip differ from Camloc.
Minimum Total Thickness (No minimum) applies to Skybolt CLoc receptacles only. Higher minimums apply to Camloc.
Copyright 2016
Page 29
Rev 040616
Grommet Retainers
.038 - .041
.053 - .057
.430
SK-R4G Steel
SK-R4GS Stainless
SK-R4T Steel
SK-R4TS Stainless
Note: Industry standard R4T parts have an ID tolerance of .428 - .458.
Install with SK-T26 -or- SK-SP5 Tools
Oversize or Worn Holes?
Simple solution to big problems. Simply insert over grommet skirt, install standard retainer,
the hole is filled and the fastener assembly remains captive.
SK-R560 Series
Grommet Backing Washer
Use with standard grommets and retainer
Part#
SK-R560
Min Hole Dia
Max Hole Dia
.530
.600
Common Panel Configurations
A
B
Outer
Panel
Inne
r
Gasket Material
C
D
Copyright 2016
Page 30
Rev 031816
Skybolt CLoc® SK4000 Series
Non-Adjusting - Fixed Depth Receptacles
NASM5591 Performance Rated (unless noted) TSO-C148 Approved
SK214 Steel/Stainless -and- SK40R17 Stainless Light Weight - Non Floating Series
SK214-16
Camloc
Airloc II
Part#
Part#
Material
Finish
Steel
Zinc
214-16
1142700
NASM5591
NASM5591
None
None
Alum6061
None
214-16S
1142710
Stainless
Passivated
NASM5591
NASM5591
NASM5591
SK214-16SD
214-16SD
1142711
Stainless
Passivated
NASM5591
NASM5591
NASM5591
Countersunk
SK40R17-1
40R17-1
1142714(1)
Stainless
Electropolish
NASM5591
NASM5591
No NASM5591
SK40R17-2
40R17-2
1142715(1)
Stainless
Electropolish
NASM5591
NASM5591
No NASM5591
Dimpled
NASM5591
SK214-16A(1)
Note 1
SK214-16S
A
B
C
D
E
F
Weight
dec/mm
dec/mm
frac/mm
dec/mm
dec/mm
dec/mm
Lb/Grams
.0170lb
1.000
1.375
1/8
0.520
0.546
0.063
25.400
34.925
3.251
3.251
3.251
3.251
7.7g
1.000
1.375
1/8
0.520
0.546
0.073
.0060lb
25.400
34.925
3.251
3.251
3.251
3.251
2.8g
1.000
1.375
1/8
0.490
0.546
0.063
.0160lb
25.400
34.925
3.251
3.251
3.251
3.251
7.2g
1.000
1.375
1/8 Csk
0.490
0.546
0.063
.0165lb
25.400
34.925
3.251 Csk
3.251
3.251
3.251
7.5g
1.000
1.375
1/8
0.520
0.605
0.045
.0120lb
25.400
34.925
3.251
3.251
3.251
3.251
5.4g
1.000
1.375
1/8 Dimp
0.520
0.605
0.045
.0120lb
25.400
34.925
3.251 Dimp
3.251
3.251
3.251
5.4g
Note (1) SK214-16A meets NASM5591 Tensile/Shear, cycle limited to 3500. Airloc II 1142714/15 will not meet NASM5591 Tensile/Shear.
SK244-161 Floating Series
Skybolt
Part#
Revised
Camloc
Airloc
Insert
Cage
A
B
C
D
E
Weight
Part#
Part#
Part#
Material
Material
dec/mm
dec/mm
frac/mm
dec/mm
dec/mm
Lb/Grams
Steel
Alum
SK244A161S
SK244-16
244-16
1142706
NASM5591
NASM5591
NASM5591
NASM5591
SK244-16A
None
None
SK244A161A
Aluminum
Alum
Note 1
SK244C161C
None
NASM5591
244-16S
1142717
NASM5591
NASM5591
Stainless
Stainless
1.000
0.865
1/8
1.375
0.560
.0235lb
25.400
21.971
3.251
34.925
14.224
10.659g
.0115lb
1.000
0.865
1/8
1.375
0.560
25.400
21.971
3.251
34.925
14.224
5.216g
1.000
0.865
1/8
1.375
0.560
.0235lb
25.400
21.971
3.251
34.925
14.224
10.659g
Maximum NASM25027 Push-Out Rating for platenuts is 125 lbs. SK244-161 tested to 250 lbs push-out.
Copyright 2016
Page 31
Rev 101814
Dash 4 and Dash 5 Series Adjustable Receptacles
TSO-C148 Approved
SK215-4 Series
Non-Floating
(External Locking)
SK215-5ENC Series
Non-Floating
Encapsulated
(Internal Locking)
SK245-161 Series*
Floating
(External Locking)
(Can be installed without removing
assembly)
US Patent Pending
Insert depth easily adjusts in .015 incriments. One fastener (stud) length covers a total thickness range of .300 or 10 dash#s
(part#s) eliminating expensive inventory. Unlimited adjustment, even without removing the panel (Dash 5). Great for PreLoad applications. New SK245-161 Series Receptacles have 18% weight advantages over any similar design.
Part#
Configuration
Material
Finish
Rivet
Weight
SK215-4
Non-Floating - Locking Clip-Rivet
Alum6061
None
1/8
.0115/5.22g
SK215-5
Non-Floating - Shuttle Pin Lock-Rivet
Alum6061
None
1/8
.0115/5.22
SK215-5ENC
Non-Floating - Shuttle Pin Lock-Rivet-Encapsulated
Alum6061
None
1/8
.0165/7.48
SK215-BN5
Non-Floating - Backing Nut
Alum6061
None
Nut
SK215BN5ENC
Non-Floating - Backing Nut - Encapsulated
Alum6061
None
Nut
SK245A161A
Floating, Removable Insert, Rivet. Replaces SK245-4
Alum6061
None
1/8
.0155/7.030
Note1
SK245C161C
Floating, Removable Insert, Rivet. Replaces SK245-4
Stainless
None
1/8
.0405/18.3
Note1
SK245-5
Floating, Shuttle Pin-Rivet
Alum6061
None
1/8
.0160/7.260
SK245-5ENC
Floating, Shuttle Pin-Rivet - Encapsulated
Alum6061
None
1/8
.0170/7.430
Note 1: Competing brand equivalent: .0185 lbs (18% heavier). SK245-161 is adjustable from
front and back. Other competing versions are not.
SK-SP5 Receptacle Adjustment Tool
Grommet Retainer Installation Tool
Specifically designed to preset and adjust CLoc® 4000 Dash
5 Series Adjustable Receptacle and Mounts. Locking Sleeve
can be set for known panel thickness to preset SK215-5,
SK245-5, and SK2003-50ADJ Series receptacles. With stud
removed from grommet in outer panel, tool may be inserted
into the receptacle to unlock and adjust insert without even
seeing the insert. Positioning sleeve to the opposite end of
tool, it becomes a “T26” Tool for installing grommet
retainers.
Copyright 2014
Page 32
REV 020614
Skybolt CLoc® 4000 Series Rivetless Receptacles
4 - Piece Series (Stud - Grommet/Retainer - Locking Receptacle)
New - CLoc® Rivetless Easy Install Receptacles
SK410 Series - Adjustable Depth
Easy to Install rivetless Locking Receptacle
SK410-28S - Stainless - 1/2-13 Thread - for wood, composites
and SK4000 Series Nutserts
SK410-29A Aluminum - 1/2-20 Thread for non-ferrous metals
SK410-29S Stainless - 1/2-20 Thread for metals
Flush Grommets
Plus Flush Grommets
SK-G,H
SK-NSG,N2,N,O,N3
'G'
Outer Panel
Inner Support Panel
Thickness
inches
Target Dash Number for
Thickness (1)
mm
inches
mm
SK4002, SK40S5, and SK5000 Series Studs
Min
Max
Min
Max
Min
Min
STUD DASH#
STUD DASH#
.010
.040
.070
.100
.130
.160
.190
.220
.250
.280
.310
.340
.370
.400
.310
.340
.370
.400
.430
.460
.490
.520
.550
.580
.610
.640
.670
.700
0.25
1.02
1.78
2.54
3.30
4.06
4.83
5.59
6.35
7.11
7.87
8.64
9.40
10.16
7.87
8.64
9.40
10.16
10.92
11.68
12.45
13.21
13.97
14.73
15.49
16.26
17.02
17.78
0.660
0.630
0.600
0.570
0.540
0.510
0.480
0.450
0.420
0.390
0.360
0.330
0.320
0.320
16.76
16.00
15.24
14.48
13.72
12.95
12.19
11.43
10.67
9.91
9.14
8.38
8.13
8.13
-1
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
.430
.460
.490
.520
.550
.580
.610
.640
.730
.760
.790
.820
.850
.880
.910
.940
10.92
11.68
12.45
13.21
13.97
14.73
15.49
16.26
18.54
19.30
20.07
20.83
21.59
22.35
23.11
23.88
0.320
0.320
0.320
0.320
0.320
0.320
0.320
0.320
8.13
8.13
8.13
8.13
8.13
8.13
8.13
8.13
-16
-17
-18
-19
-20
-21
-22
-23
-16
-17
-18
-19
-20
-21
-22
-23
Note (1) Minimum Support Panel thickness is a value that assumes the outer panel thickness is the 'Min G' stated to the left. For every outer panel thickness value
greater than the 'Min G', subtract that additional thickness from Inner Support Panel 'Min' value. Example: SK-NS Grommet, SK40S5-2 Stud - Outer Panel 'G'
thickness is .032. (.032 - .010 = .022). Inner Support Panel 'Min' thickness is (.660 - .022 = .638). The support panel (normally) can not be any thinner than the
length of the receptacle or .320 as noted.
Copyright 2013
Page 33
REV 032416
Skybolt CLoc® 4000 Series Rivetless Receptacles
4 - Piece Series (Stud - Grommet/Retainer - Locking Receptacle)
New - CLoc® Rivetless Easy Install Receptacles
SK430 Series - Adjustable Depth - Extended Nose
Easy to Install rivetless Locking Receptacle
SK430-16S - Stainless - 1/2-13 Thread - for wood, composites
and SK4000 Series Nutserts
SK430-17S - Stainless - 1/2-20 Thread for non-ferrous metals
Minimum Inner Panel Thickness for full thread engagement = .465 Drill Outer Panel to .640 (41/64)
Maximum Outer Panel Thickness
Chart 1- Receptacle is flush with Inner Panel Face
Chart 2 - Receptacle is fully extended from Inner Panel
Face (add .335* to "flush" numbers)
All
Decimal
Decimal
mm
mm
Decimal
Decimal
mm
mm
SK4000 Series
min
max
min
max
min
max
min
max
-2S
-3S
-4S
-5S
-6S
-7S
-8S
-9S
-10S
-11S
-12S
-13S
-14S
-15S
-16S
-17S
-18S
-19S
-20S
-21S
-22S
-23S
.350
.360
.390
.420
.450
.480
.510
.540
.570
.600
.630
.660
.690
.720
.750
.780
.810
.840
.870
.900
.930
.960
.360
.390
.420
.450
.480
.510
.540
.570
.600
.630
.660
.690
.720
.750
.780
.810
.840
.870
.900
.930
.960
.990
8.890
9.144
9.906
10.668
11.430
12.192
12.954
13.716
14.478
15.240
16.002
16.764
17.526
18.288
19.050
19.812
20.574
21.336
22.098
22.860
23.622
24.384
9.144
9.906
10.668
11.430
12.192
12.954
13.716
14.478
15.240
16.002
16.764
17.526
18.288
19.050
19.812
20.574
21.336
22.098
22.860
23.622
24.384
25.146
.665
.695
.725
.755
.785
.815
.845
.875
.905
.935
.965
.995
1.025
1.055
1.085
1.115
1.145
1.175
1.205
1.235
1.265
1.295
0.695
0.725
0.755
0.785
0.815
0.845
0.875
0.905
0.935
0.965
0.995
1.025
1.055
1.085
1.115
1.145
1.175
1.205
1.235
1.265
1.295
1.325
16.891
17.653
18.415
19.177
19.939
20.701
21.463
22.225
22.987
23.749
24.511
25.273
26.035
26.797
27.559
28.321
29.083
29.845
30.607
31.369
32.131
32.893
17.653
18.415
19.177
19.939
20.701
21.463
22.225
22.987
23.749
24.511
25.273
26.035
26.797
27.559
28.321
29.083
29.845
30.607
31.369
32.131
32.893
33.655
-24S
-25S
.990
1.020
1.020
1.050
25.146
25.908
25.908
26.670
1.325
1.355
1.355
1.385
33.655
34.417
34.417
35.179
If you revert to Chart 2, using a longer stud than charted positions the SK430 receptacle back towards flush,
SK430-16S - Screw-In Locking Receptacle - Adjustable Depth (.335*)
.335
*Note - Distance from face of receptacle to the 1st thread.
Copyright 2016
Page 34
Rev 032416
Skybolt CLoc® 4000 Series Nutserts
SK4000-200 SK4000-350 SK4000-500 Nutserts
Excellent for any Blind or Non-Blind Mounting Application
Ideal Industrial Applications
Use SK410-28S or SK430-16S Inserts - Patent Pending
SK4000-200
SK4000-350
L
SK4000-500
Material
Body
L
Hole Size
Grip
Dia
Length
Dia
Flange
Thickness
Installed (max)
L (Protrusion)
SK4000-200
SK4000-350
SK4000-500
Steel-Yellow Zinc
11/16
.063-.200
.685
.047
.850
11/16
.200-.350
.685
1.150
1.300
.865
Steel-Yellow Zinc
.865
.047
.850
Steel-Yellow Zinc
11/16
.350-.500
.685
1.450
.865
.047
.860
SK4000-NST
Nutsert Installation Tool
Use 271 Red Locktite® to lock threads when properly adjusted. Warning: Thread lockers set up in approximately 5 minutes. Adjust insert so that the
standard stud (SK4002/40S5) head is no lower than flush with the grommet. For SK4002-FW Folding Wings, allow a minimum of .150 distance from the
head surface to the grommet surface or use a .055 shim between the head and the grommet. If insert is set to deep with the stud locked, you will not be able to
Stud Grip Chart - SK410-28S Insert
Stud Grip Chart - SK430-16S Insert
Standard
Folding Wing
Grip-Decimal
Grip-MM
Standard
Folding Wing
Grip-Decimal
Grip-MM
SK4002/40S5
SK4002-FW
SK4002/40S5
SK4002-FW
2.03-7.62
.110-.330
2.79-8.38
10.41-16.00
3.56-9.14
.440-.660
.170-.390
4.32-9.91
.470-.690
11.18-16.76
11.94-17.53
.200-.420
5.08-10.67
.500-.720
12.70-18.29
.230-.450
5.84-11.43
.530-.750
13.46-19.05
.260-.480
6.60-12.19
.560-.780
14.22-19.81
.290-.510
7.37-12.95
8.13-13.72
8.89-14.48
9.65-15.24
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
.410-.630
.140-.360
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
Min-Max
.200-.600
Min-Max
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
Min-Max
.080-.300
Min-Max
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
.590-.810
14.99-20.57
.620-.840
.650-.870
.680-.900
15.75-21.34
16.51-22.10
17.27-22.86
-13
.320-.540
.350-.570
.380-.600
Copyright 2016
Page 35
-13
5.08-15.24
REV 032416
Skybolt CLoc® 4003 Series Studs
2 - Piece Series (Stud/Grommet - Locking Receptacle)
Stud/Grommet Assembly is bonded into Outer Panel
SK4003 Series -
SK4003G1S Grommet - does not use separate cup like the SK4002/40S5 Series.
SK4003 (Stud/Grommet Assembly) used with SK430 Series receptacle
Copyright 2016
Page 36
REV 032416
Pages 37-41
Intentionally Left Blank
(Heavy Equipment - Ballistic Fasteners)
Copyright 2016
Page 37-41
New Skybolt SK2003A Series Cessna Platemount
STC 'd FAA-PMA and TSO-C148
October 30, 2014
US Patent 7,997,843 and 8,282,329
Skybolt continues to build on success with our 4th Generation Cessna Platemount. The
SK2003A Series Mounts are specifically designed around the latest generation Cessna/Lord
J7444-42 Series Mount. The SK2003-14A, -24A, and -42A all have similar flex feature as
the J7444-42. Seeing is believing; The Skybolt product is a vast improvement in overall
quality with the improved features integrated into each dash number. This brings the -14 and
-24 up to the performance level of the -42. The Skybolt SK2003-14A, -24A, and -42A look
and install exactly the same as the Cessna/Lord part it replaces using the same fastener length.
The SK2003-14A, -24A, and -42A are fixed depth, Non-Adjustable Platemounts.
100% Made in USA. Each SK2003 Mount is stress tested for 100% reliability.
Cessna Part# J7444-14 Used On - 67-On C150 (10ea), 67-86 C172 (11ea), C172XP (13ea) 68-78 C177 (14ea)
Skybolt Part#
Description
SK2003-14A
Southco
Use with standard fasteners:
82-19-120-20
82-19-140-20
82-32-201-20
Suggested
Fastener
82-19-xxx-20
Unit Weight
SK2003-14A
J7444-14
.0230Lb 10.4g .0310Lb 14.0g
(Length Varies)
Stainless Phillips Stud
Stainless Stud Retainer
Cessna Part# J7444-24 Used On - 73-86 C182 (14ea)
Skybolt Part#
Description
SK2003-24A
Camloc or CLoc® SK27S3
SK27S3-2,3,4
SK27S3-2S.3S,4S
2600-SW
Suggested
Fastener
SK27S3-2S,3S,4S
Unit Weight
SK2003-24A
J7444-24
.0230Lb 10.4g .0310Lb 14.0g
(Length Varies)
Steel Phillips Stud
Stainless Retainer
Cessna Part# J7444-36 and -42 Used On - 96-On C172 R & S (14ea)
Skybolt Part#
Description
SK2003-42A
Camloc or CLoc® SK40S5
SK40S5-2,3,4
SK40S5-2S,3S,4S
SK-H
SK-HS
SK-O
SK-OS
SK-O18
SK-O18S
R4G
Steel Phillips Stud
Steel Grommet
Stainless Grommet
Steel Grommet
Stainless Grommet
Steel Long Reach Grommet
Stainless Long Reach Grommet
Grommet Retainer
Suggested
Fastener
SK40S5-2S,3S,4S
Unit Weight
SK2003-42A
J7444-42
.0230Lb 10.4g .0310Lb 14.0g
(Length Varies)
All Aircraft
Early 172 R & S
Later 172 R & S
All Grommets
SK2003-50ADJ - Adjustable - Use with Southco or Camloc®/CLoc® 27S3/40S5
.0325Lb 14.8g
Must use SK-SP5 Tool for Adjustment
SK2003-14A, -24A, and -42A use SK2003-AW4S CamWashers
Copyright 2014
Page 42
Pricing Subject to Change
Skybolt SK2003AW4 Platemount CamWasher Set
STC 'd FAA-PMA and TSO-C148
October 30, 2014
US Patent 7,997,843 and 8,282,329
CamWashers allow simple location adjustment of the Platemount
location so that it is aligned with the cooresponding cowling
fastener. Simply modify any Skybolt SK2003A Series Mount for
the CamWashers, install, and "dial" the location of the Platemount
as determined by the template. No complex drilling of any aircraft
components is required to perfectly align any Cessna cowling. The
patented design allows full movement in both axis plus a center
neutral location.
SK2003-AW4S Components shown with modified SK2003A Series Platemount
Skybolt Part#
SK2003-AW4S
SK2003-AW5S
SK203-TEM1
Description
CamWasher Set* Use with Non-Adjustable Mounts
CamWasher Set* Use with -50ADJ Adjustable Mounts
Alignment Template
Use with any Skybolt SK2003A Series Platemounts
*SK2003-AW4S includes 2 ea CamWashers. Use with any Non-Adjusting Platemount
*SK2003-AW5S includes 2 ea CamWashers and 1ea SK2001 Shim. Use with SK2003-50ADJ Platemount
SK2003A Series Mount drilled to 7/16 with Unibit-1 Stepdrill
SK2003-AW5 CamWashers set at
"Center Default Position"
SK2003-AW5 CamWashers set
at full left of center position
SK2003-AW5 CamWashers set
at full right of center position
The same adjustment applies for full up and full down. As these are "CamWashers", any positioning between full
up, down, left, and right are easily "dialed" for perfect alignment.
Copyright 2013
Page 43
Rev 010612
Skybolt CLoc® Tools
Template-215
Template-245
Template-213
The first step to install CLoc® Fasteners (once fastener hole position is established
with a 1/8” pilot hole in outer and inner panel….as if you were installing a POP rivet),
is to drill the locking receptacle mounting holes (rivet holes) and center relief holes.
Skybolt offers simple drill templates to drill receptacle rivet holes. For CLoc®
2000 Series, use either Template-213. Use a Unibit-1 to drill receptacle relief hole
and fastener hole in the outer panel. For CLoc® 4000 Series, use either
Template-215. You must use the Template-245 to drill the receptacle center relief
hole. Use a Unibit-3 or-4 to drill this large hole. If you attempt to drill this hole
without the Template-245 (cleko from the back), the drill will “walk” and you will
have an un-centered hole. For the outer panel grommet hole (4000 Series), the
Unibit-1 (15/32 step) will easily expand the hole without “walking”
Note: The offset hole shown in Template-213 and -215 is to drill an access hole to
adjust SK213-2 and SK215/SK245-4 Adjustable receptacles that use an external
locking clip. It is important to note that these photos show the proper “front” face of
the template (turn it over and the holes will not function with the receptacle. Use
caution when drilling so that the holes are oriented properly).
Unibits-1 and
Unibit-3 or-4
SK-4P3 Pliers – We specified the best quality pliers
on the market. Required to compress CLoc® or
Camloc® 4000 Series Studs to allow the pin to pass
through the grommet. When pressure is relieved, the
fastener is captive to the grommet; thus the assembly
is captive to the outer panel when fastener is not
locked into the inner panel.
SK-T26 Combination Tool – Installs 2000
Series “2600-LW” Retainers –or- 4000 Series
SK-R4G Grommet Retainers. Note: (a) the SKR4G Retainer is punched towards the large end
of the taper tool prior to pressing it into position
with the handle. (b) this tool only works with
stud not installed into the grommet (install the
retainers onto the grommets 1st; then install the
studs with SK-4P3 Pliers.
SK-SP5 Receptacle Adjustment Tool. For CLoc®
Dash 5 Adjusting Receptacles. Uses a sliding sleeve as
a depth setter to set the target position of the
receptacle insert. By sliding the sleeve to the far end
(flush with the pointed end and locking, reverse the
cap and the tool becomes a traditional SK-T26 Tool to
install SK-R4G grommet retainers.
Copyright 2012
Page 44
Skybolt ZLoc® Stainless Series Fasteners
Rev 010612
Skybolt manufactures studs and buttons similar to existing designs.
Dzus is a registered trademark of the Dzus Fastener Co. Skybolt has
no affiliation with Dzus Fasteners.
Design Selection Procedure:
1. From the information in the following table, consider a Stud type.
2. Select type of retainer (grommet or GP type retainer).
3. From charts, select Stud and S Spring combination for the application.
Standard Line
Fastener Size
3
4
5
6
Performance
Locked Serive
Tension (LBS)
20
30
45
55
Max. Tension W/O
Distortion (LBS)
45
60
85
110
Rated Shear (LBS) 100
150
200
300
Wear Life (Uses)
5M
5M
25M 40M
Max. sheet separation at 150% of locked service
tension = 3/64".
7
65
125
350
40M
STUDS - Hardened Carbon Steel - Cadmium Plated per QQ-P-416, Type II, Class 2.
and 300 Series Stainless (Skybolt Stainless ZLoc® Series Fasteners are TSO-C148 )
Note: SKYBOLT manufactures and stocks stainless ZLoc® Series studs.
WING HEAD STUD
Type AW,AJW,FW,FAW,FJW
Note: AJ, FJ, AJW, and FJW studs have a long undercut and are a direct replacement for A and F studs. FA studs (common to WWII aircraft)
available in 303 Stainless.
STUD RETAINERS
Type GA and GF Grommets are aluminum.
Type GA Full Grommet
For use with all Studs
except Flush Head
RECEPTACLE - S SPRING
Type GF Full Grommet
For use with Flush
Head Studs (FJ Studs)
Type GP Retainer is Nylon
Type GP Half Grommet
For use with all Studs
Cadmium plated music wire.
Type SA Spring
Copyright 2012
Page 45
Some Patr#s Special order Only
Skybolt Aircraft ZLoc®
Studs
Head
Size
W
5/16
Drill
Outer
Panel
A max
7/32
Drill
Support
Panel
B*
3/8
Typical
Stud Size
Lt
L
3-25
0.325
0.250
3-30
0.375
0.300
4-30
0.400
0.300
7/16
5/16
3/4
4-35
0.450
0.350
4-40
0.500
0.400
5-35
0.475
0.350
9/16
3/8
5/8
5-40
0.525
0.400
5-45
0.575
0.450
5-50
0.625
0.500
5-55
0.675
0.550
6-40
0.550
0.400
5/8
7/16
1
6-45
0.600
0.450
6-50
0.650
0.500
6-55
0.700
0.550
6.5-40
0.570
0.400
11/16
1/2
1
6.5-45
0.620
0.450
6.5-50
0.670
0.500
6.5-55
0.720
0.550
7-40
0.575
0.400
3/4
17/32
1-1/16
7-50
0.675
0.500
7-60
0.775
0.600
Note: B* is oversize to allow relief for grommet/retainer or dimpled panels.
Rev 010612
Rivet
Spacing
G
5/8
Rivet
Size
3/4
3/32
1"
1/8
1-3/8
1/8
1-3/8
1/8
1-7/16
1/8
3/32
S SPRING
RECEPTACLES
S Spring
Part#
Stud Grommet/Retainers
Stud
Size
3
4
5
6
6.5
7
Panel (P)
Thickness
.015-.025
.026-.050
.051-.094
.015-.025
.026-.050
.051-.075
.076-.100
.031-.062
.063-.094
.095-.125
.040-.065
.066-.100
.101-.135
Max .062
.063-.093
.094-.200
.050-.095
.096-.156
.157-.218
GA and GF Full Grommet/Retainer
Type
Type
GA
GF
OD
GA3-175
NA
7/32
GA3-200
NA
GA3-250
NA
GA4-225
GF4-125
5/16
GA4-250
GF4-150
GA4-275
GF4-175
GA4-300
GF4-200
GA5-312
GF5-175
3/8
GA5-350
GF5-225
GA5-375
GF5-250
GA6-350
GF6-218
7/16
GA6-375
GF6-250
GA6-425
GF6-300
GF6.5-218
1/2
GA6.5-375
GF6.5-250
GA6.5-500
GA7-375
GF7-250
17/32
GA7-475
GF7-325
GA7-525
GF7-400
T*
0.015
GP Plastic Retainer
Type
GP
OD
GP3B
5/16
T
.035
0.025
GP4B
7/16
.035
0.028
GP5B
9/16
.035
0.028
GP6B
5/8
.045
0.035
GP6B
5/8
.045
0.040
NA
Size
3
Size
4
Size
5
S3-150
S3-175
S4-200
S4-225
S5A-200
S5A-225
S5A-250
S5A-275
S5A-300
S5A-325
Size
S6A-225
6 & 6.5 S6A-250
S6A-275
S6A-300
S6A-400
S6A-425
Size
S7A-225
7
S7A-250
S7A-275
S7A-300
Total Thickness Charts
Choose correct chart for Stud Size. Enter Total Thickness column and select Stud/Spring combination
Size 3 Stud, SK3 Spring
Total
Thickness
.045-.069
.070-.094
.095-.119
.120-.144
.145-.169
.170-.194
Stud
Dim L
-20
-20
-25
-25
-30
-30
Use
Spring
Dim H
-175
-150
-175
-150
-175
-150
Total
Thickness
.100-.124
.125-.149
.150-.174
.175-.199
.200-.224
.225-.249
Stud
Dim L
-30
-30
-35
-35
-40
-40
Use
Spring
Dim H
-225
-200
-225
-200
-225
-200
Total
Thickness
.055-.079
.080-.104
.105-.129
.130-.154
.155-.179
.180-.204
.205-.229
.230-.254
.255-.279
Determine Total Thickness by adding:
1) Outside Panel Thickness (P)
2) Inside (Support) Panel Thickness (Q)
3) Grommet Thickness (T) if GA or GF grommet used.
4) Allow for gasket material or paint build-up. Allow for panel face misalignment.
Copyright 2012
Page 46
Stud
Dim L
-30
-30
-30
-30
-40
-40
-40
-40
-50
Use
Spring
Dim H
-275
-250
-225
-200
-275
-250
-225
-200
-275
Size 6 & 7 Stud, SK6 & 7 Spring
Total
Thickness
.140-.164
.165-.189
.190-.214
.215-.239
.240-.264
.265-.289
.290-.314
.315-.339
.340-.364
Stud
Dim L
-40
-40
-40
-40
-50
-50
-50
-50
-60
Use
Spring
Dim H
-300
-275
-250
-225
-300
-275
-250
-225
-300
Rev 010612
ZLoc® Fastener Principles and Design Options
One usually thinks of two components as part of the ZLoc® Fastener, the Stud and Spring Receptacle. In the case of the EHF
Ejector Series Stud, it is retained in the panel, when unlocked by the flange being fastened to the outside panel. Standard
ZLoc® Studs, typically use a Stud retainer to prevent them from falling from the panel when unlocked. Two common retainers
are the GP (Nylon) washer or the GA (for Oval Head Studs) or GF(for Flush Head Studs). GP (Nylon) Retainers require no
installation tooling. GA and GF Grommet/Retainers require tooling to install. GP (Nylon) Grommets do not figure into Total
Thickness calculations whereas GA or GF Grommets add .028 to Total Thickness Calculations.
Some helpful hints to remember about ZLoc® Fasteners:
1) Thicker panels require shorter Springs for a given Stud. Likewise, thinner panels require a taller Spring for a
given Stud.
2) When locked, the Stud slot or wing always aligns with the Spring mounting holes. Therefore, whatever angle
you mount the Spring Receptacle, the Stud will align with it when locked.
3) SKEHF5 Studs should only use S5A or #5 Springs. SKEHF6 Pro Studs can use either S5A or S6A Springs.
4) TOTAL THICKNESS is the summation of both the outside and inside panels plus allowances for gaskets,
grommets, interference or panels that do not lay flat together. Panel facing (panels do not lay flat together,
and in most applications, they do not) can add greatly to charted values.
5) If springs are mounted to Weld Tabs of Plates, the Tab serves as the Inside Panel and adds .100 to Total
Thickness
6) If locking torque is too tight or too loose, bend the spring with Skybolt Tool SK-7301
7) The Part# of a ZLoc® stud is the L Dimension measured from the head (beneath the head for Oval Head, on
the top of the head for Flat Head) to the far end of the slot where the spring rests when locked. SKFO65-50 is .50
from the flat of the head to the end of the slot saddle.
8) The Part# of the Spring is the height of the Spring. SK6-375 is .375 high.
L
Skybolt SK EHF Ejector Series
Skybolt SK EJ Ejector Series
SKEHF5 and SKEHF6 Self Ejecting Fasteners provide
ZLoc® 1/4-turn action with studs that eject from
the receptacle when opened. Ejected studs won't
hang up when sliding or curved panels are removed
and give visual sign of unlocked fastener. The
Stud assembly is riveted to the panel with 1/8"
rivets or screws.
SKEJ Series Ejecting Fasteners utilize a threaded
backing collar to secure fastener to outer panel.
Made from exclusive Skytanium®, the fastener has the
same strength rating as the SKEHF5 Series, is 30% lighter,
with superior finish.
No more ugly rivets!
Head
Total*
Head
SKEHF
Total*
Diameter
L
Thickness
SKEJ
Diameter
L
SKEHF5-40
5/8
.40
.075-.125
SKEJ-40A
3/4
.50
SKEHF5-50
5/8
.50
.150-.225
SKEJ-50A
3/4
.60
SKEHF5-50W
5/8
.50
.150-.225
SKEJ-50AW
3/4
.60
SKEHF5-55
5/8
.55
.225-.275
SKEJ-55A
3/4
.65
SKEHF5-60
5/8
.60
.275-.325
SKEJ-60A
3/4
.70
SKEHF5-65
5/8
.65
325-.425
SKEJ-65A
3/4
.75
SKEHF6-40
3/4
.40
.050-.100
SK-BN1
Standard Collar .125 Panel
SKEHF6-50
3/4
.50
.100-.175
SK-BN2
Optional Collar .187 Panel
SKEHF6-55
3/4
.55
.200-.250
SK-BN3
Optional Collar .250 Panel
SKEHF6-60
3/4
.60
.250-.300
Use LockTite to retain threaded BN collar
SKEHF6-65
3/4
.65
.300-.350
*Note: Total Thickness figures are for most applications using either the SK5-325 height springs or SK6-375 height springs.
Copyright 2012
Page 47
Thickness
.075-.125
.150-.225
.150-.225
.225-.275
.275-.325
325-.425
Rev 010612
Skybolt ZLoc® Series Fasteners - Racing
Steel and Skytanium®
Skytanium Strength Ratings Equivalent to Alloy Steel
1/3 the Weight of Steel Buttons
Skybolt Oval Head Buttons
Skybolt Flat Head Buttons
#5 Series 9/16 Head Diameter Torque 40 in-lb
Steel
Part#
SKAO5-50
Skytanium®
Part#
Load
ZGO5-50
800 lb
Total*
Total Lgth Thickness
.720
.100-.175
Steel
Part#
SKFO5-50
Skytanium®
Part#
Load
ZGFO5-50 800 lb
Total*
.640
.100-.175
Skytanium®
Skytanium®
Steel
Total*
Steel
Total*
Part#
Part#
Load
Total Lgth Thickness Part#
Part#
Load
SKAO65-40 ZGO65-40 1000 lb
.675
.100-.175 SKFO65-40 ZGF65-40 1000 lb
.570
.100-.175
SKAO65-50 ZGO65-50 1000 lb
775
.175-.250 SKFO65-50 ZGF65-50 1000 lb
.670
.175-.250
SKAO65-55 ZGO65-55 1000 lb
.825
.250-.300 SKFO65-55 ZGF65-55 1000 lb
.720
.250-.300
SKAO65-60 ZGO65-60 1000 lb
.875
.300-.450 SKFO65-60 ZGF65-60 1000 lb
.770
.300-.450
SKAO65-65 ZGO65-65 1000 lb
.925
.450-.500 SKFO65-65 ZGF65-65 1000 lb
.820
.450-.500
*Note: Total Thickness figures are for most applications using either SK5-325 height springs or SK6-375 height springs.
Skybolt ZLoc® Series Tabs and Springs
Tabs are welded to frame to serve as a spring mount
Use SSP43 1/8 Steel Pop Rivets.
SK944
SK945EHF
Use SK4-225 Spring
Use for all #4 Buttons
.750 Rivet Spacing
.100 Thick (Including Spring Dimple)
Weight = .0115 lbs
Use SK5-325 Spring
Use for all #5 Buttons & EHF/EJ Studs
1.000 Rivet Spacing
Weight = .0220 lbs
SK945 and SK946
SK945CL
Use SK5-325 or SK6-375 Spring
Use for all #5 or #6 Buttons & EHF Studs
1.000 Rivet Spacing (SK945)
or 1.375 Rivet Spacing (SK946)
Weight = .0260 lbs
Use SK5-325 Spring
Use CLoc SK214-16A, 244-16, SK245 Series
1.000 Rivet Spacing
Weight = .0165 lbs
Weight = .0165 lbs
ZLoc® SPRINGS (Most Common)
SK4-225
SK5-325
SK6-325
SK6-375
#4 Spring
#5 Spring
#6 Spring
#6 Spring
3/4" Rivet Spacing
1" Rivet Spacing
1-3/8 Rivet Spacing
1-3/8" Rivet Spacing
SK-DP1 PANEL REINFORCEMENT PLATE
This aluminum Doubler Plate is used with all #6 SKFO65 and ZGF65
Flush Head ZLoc® Studs to add panel strength.
Copyright 2012
Page 48
Rev 112113
Skybolt ZLoc® and Aloc® Series Fasteners - Tools
SK-DT1 Panel Dimpling Tool
Dimple any .375 diameter hole 100 to 120 degrees. Use with Size 5, 6, or
ZGF65 Series studs. Simply place dies on oppostite sides of the panel, insert
bolt-nut, and tighten to desired depth.
GROMMET TOOLING - ZLoc® Aircraft Series
The Skybolt® ZLoc® or Dzus® installation tools are specifically designed for the SK-41405-3 Clamp Tool. We developed this method of
staking the ZLoc stud/grommet 25 years ago with preferred results in insuring a uniform installation. The traditional hammer tools are very
awkward to use and typically result in a poor installation. Only Skybolt® uses a unique centering system that allows the dies to float and
self-align. Competitor’s tools are pre-set in the clamp thus alignment many or may not be true. We stock a complete range of tools from -3
thru -6.5 sizes. One SK-41405-2 Clamp fits all tool sets. Order clamp separate.
Set (Less Clamp)
SK-A3C
4 Tools
SK-F3C
2 Tools
SK-A4C
4 Tools
SK-F4C
SK-A5C*
SK-F5C
SK-A6C
SK-F6C
SK-A65C
SK-F65C
SK-41405-3 Clamp
2 Tools
4 Tools
2 Tools
4 Tools
2 Tools
4 Tools
2 Tools
*Note: The SK-A5C tool is designed to replace
grommets on Beech Bonanza cowlings without
removing brackets from cowling.
ZLoc® Spring Adjusting Tool
SK-7301
Skybolt developed this handy spring adjusting tool to effectively adjust spring depth. The SK7301 Tool eliminates the need for various
length buttons (ZLoc® studs). Think about it, one stud size fits all hole applications! And, with properly adjusted springs, you eliminate
troublesome fasteners that are either too tight or too loose. The Skybolt SK7301 tool can adjust springs outward without removing the outside
panel; will not bend or even mar the thinnest panel or the finest paint. To tighten springs, the SK7301 tool is designed to pull against the
spring legs, even with rivets in place. The SK7301 tool is designed for not only the chassis fabricator, it is designed for the car owner or
aircraft owner as well. The SK7301 fits both #5 and #6 springs. It works great!
To Loosen Spring (Pull Outward) ….Insert SK7301 and tighten nut 2-3 turns
or as necessary
To Tighten Spring (Pull Inward) - Install legs and place
over rivets, tighten 2-3 turns or as necessary.
GROMMET TOOLING - ALoc® Series
A must to replace any ALoc Grommet.
Tool
29693/29695
Type Head
#2 Flush
9529/29667
#5 Flush
9529/29770
#5 Round
Copyright 2013
Page 49
Rev 041116
Skybolt ALoc® Series Fasteners
Airloc® Replacement TSO-C148
ALoc® Fasteners are common on Beechcraft® airplanes and latches on many cowlings. The design consists of a simple stud with a pin pressed
in the shank. The pin must be installed after the stud is installed and removed prior to removing the stud. Some panel applications for #2, #5,
and #7 studs may use a wear grommet. Unlike a ZLoc® Fastener, this grommet probably does not require replacement when replacing studs.
ALoc® Fasteners are made in various stud blank lengths and this length is indicated by the 1st Dash#. Each length can have up to 10 2nd
Dash#s, or grip sizes. The 2nd Dash# indicates the maximum grip range in .010 increments. Note that the ALoc® design has the least grip range
of all 1/4 turn fasteners. Skybolt primarily stocks certain sizes in Stainless Steel for replacement purposes only. See Conversion Kits for STCd
Aloc to CLoc (Camloc style) conversions.
ALoc® Studs
Series
Flush
Steel Hd#
Round
Steel Hd#
Head
Dia
Steel
Pin#
Cloc®
Conversion
1
2
5
7
294426
98264
98265
98266
294422
98293
98292
98291
1/4
11/32
9/16
11/16
294424
99785-2
99836
99799
2000 Series
4000 Series
Common Stainless Steel Part Numbers
Airloc
Skybolt Aloc
Steel Part#
Stainles Part#
98264-2-090
98293-1-060
98265-1-070
98265-1-080
98265-1-100
98265-2-180
98265-2-190
98265-2-200
98265-2-210
98265-2-230
98265-2-240
98265-2-250
98292-1-080
98292-1-090
98292-2-170
98292-2-250
SK112060-1-090
SK98293-1-060SS
SK294186-1-070
SK294186-1-080
SK294186-1-100
SK294186-2-180
SK294186-2-190
SK294186-2-200
SK294186-2-210
SK294186-2-230
SK294186-2-240
SK294186-2-250
SK294290-1-080
SK294290-1-090
SK294290-2-170
294290-2-250
Type
Grip
'A'
Length
#2 Flush
#2 Round
#5 Flush
#5 Flush
#5 Flush
#5 Flush
#5 Flush
#5 Flush
#5 Flush
#5 Flush
#5 Flush
#5 Flush
#5 Round
#5 Round
#5 Round
#5 Round
.081-.090
.051-.060
.061-.070
.071-.080
.091-.100
.171-.180
.181-.190
.191-.200
.201-.210
.220-.230
.231-.240
.241-.250
.071-.080
.081-.090
.161-.170
.241-.250
.230
.200
.257
267
.287
.367
.377
.387
.397
.417
.427
.437
.267
.277
.357
.437
.359
.359
500
.500
.500
.609
.609
.609
.609
.609
.609
.609
.500
.500
.609
.609
*Does not include Pin. Wing studs are available in all sizes.
ALoc® Grommets
Series
Panel
Thickness
Flush
Hd#
None
Up to .040
.041-.080
.040-.121
.122-.201
Up to .040
.041-.121
295846-1
295846-2
295250-1
295250-2
295900-1
295900-2
1
2
5
7
(May not require replacement when replacing studs)
Curling
Round
Curling
Tools
Hd#
Tools
29693/29695
98013
295902
99874-1
99874-2
295899-1
295899-2
29693/29694
See Tools P49
9529/29770
See Tools P49
29674/29685
See Tools P49
Csk
Rivet
Rivet
Spacing
99947-P098
99947-P130
99967-C098
99947-C098
99947-C130
99948-P130
99948-C130
1/16
3/32
3/32
3/32
1/8
3/32
1/8
1/2
1/2
3/4
1.0
1.0
1-3/8
1-3/8
9529/29667
9543/29689
ALoc® Receptacles
Series
1
2
5
7
Solid Receptacle
Plain
294420-P067
294420-P098
99871-P098
99833-P098
99833-P130
99797-P098
99797-P130
Csk
Plain
Floating Rec
294420-C067
98871-C098
99833-C098
99833-C130
99797-C098
99948-P130
Copyright 2016
Page 50
Rev 041316
Southco 1/4 Turn Fasteners
Southco Fasteners are very common to Cessna Airplanes.
This product was previously known as a Lions Fastener.
Series
#82
#85
A
.375
.562
C
7/8
1-1/8
D
7/16
7/16
#82 Oval Head Studs - Convert to CLoc® 2000 Series
Total
Material
Thickness
.070-.089
.090-.109
.110-.129
.130-.149
.150-.169
.170-.189
.190-.209
.210-.229
.230-.249
.250-.269
.270-.289
.290-.309
Slotted
Steel
82-11-080-16
82-11-100-16
82-11-120-16
82-11-140-16
82-11-160-16
82-11-180-16
82-11-200-16
82-11-220-16
82-11-240-16
82-11-260-16
82-11-280-16
82-11-300-16
Phillips
Stainless
Steel
82-11-080-20
82-11-100-20
82-11-120-20
82-11-140-20
82-11-160-20
82-11-180-20
82-11-200-20
82-11-220-20
82-11-240-20
82-11-260-20
82-11-280-20
82-11-300-20
Steel
82-19-080-16
82-19-100-16
82-19-120-16
82-19-140-16
82-19-160-16
82-19-180-16
82-19-200-16
82-19-220-16
82-19-240-16
82-19-260-16
82-19-280-16
82-19-300-16
Stainless
Steel
82-19-080-20
82-19-100-20
82-19-120-20
82-19-140-20
82-19-160-20
82-19-180-20
82-19-200-20
82-19-220-20
82-19-240-20
82-19-260-20
82-19-280-20
82-19-300-20
'F'
.375
.395
.415
.435
.455
.475
.495
.515
.535
.555
.575
.595
#82 Flush Head Studs - Convert to CLoc® 2000 Series
Total
Material
Thickness
.070-.089
.090-.109
.110-.129
.130-.149
.150-.169
.170-.189
.190-.209
.210-.229
.230-.249
.250-.269
.270-.289
.290-.309
Slotted
Steel
82-14-080-16
82-14-100-16
82-14-120-16
82-14-140-16
82-14-160-16
82-14-180-16
82-14-200-16
82-14-220-16
82-14-240-16
82-14-260-16
82-14-280-16
82-14-300-16
Phillips
Stainless
Steel
82-14-080-20
82-14-100-20
82-14-120-20
82-14-140-20
82-14-160-20
82-14-180-20
82-14-200-20
82-14-220-20
82-14-240-20
82-14-260-20
82-14-280-20
82-14-300-20
Steel
82-28-080-16
82-28-100-16
82-28-120-16
82-28-140-16
82-28-160-16
82-28-180-16
82-28-200-16
82-28-220-16
82-28-240-16
82-28-260-16
82-28-280-16
82-28-300-16
Stainless
Steel
82-28-080-20
82-28-100-20
82-28-120-20
82-28-140-20
82-28-160-20
82-28-180-20
82-28-200-20
82-28-220-20
82-28-240-20
82-28-260-20
82-28-280-20
82-28-300-20
'F'
.375
.395
.415
.435
.455
.475
.495
.515
.535
.555
.575
.595
#82 Wing Head Studs - Convert to CLoc® 2000 Series
Total
Material
Thickness
.070-.089
.090-.109
.110-.129
.130-.149
.150-.169
.170-.189
.190-.209
.210-.229
.230-.249
.250-.269
.270-.289
.290-.309
Steel
82-12-080-16
82-12-100-16
82-12-120-16
82-12-140-16
82-12-160-16
82-12-180-16
82-12-200-16
82-12-220-16
82-12-240-16
82-12-260-16
82-12-280-16
82-12-300-16
Stainless
Steel
82-12-080-20
82-12-100-20
82-12-120-20
82-12-140-20
82-12-160-20
82-12-180-20
82-12-200-20
82-12-220-20
82-12-240-20
82-12-260-20
82-12-280-20
82-12-300-20
Copyright 2016
Page 51
'F'
.375
.395
.415
.435
.455
.475
.495
.515
.535
.555
.575
.595
Rev 041316
Southco 1/4 Turn Fasteners
#85 Studs - Convert to CLoc® 4000 Series
Oval Head Slotted
Total
Material
Thickness
.070-.089
.090-.109
.110-.129
.130-.149
.150-.169
.170-.189
.190-.209
.210-.229
.230-.249
.250-.269
.270-.289
.290-.309
Steel
85-11-080-16
85-11-100-16
85-11-120-16
85-11-140-16
85-11-160-16
85-11-180-16
85-11-200-16
85-11-220-16
85-11-240-16
85-11-260-16
85-11-280-16
85-11-300-16
Stainless
Steel
85-11-080-20
85-11-100-20
85-11-120-20
85-11-140-20
85-11-160-20
85-11-180-20
85-11-200-20
85-11-220-20
85-11-240-20
85-11-260-20
85-11-280-20
85-11-300-20
Flush Head Slotted
Steel
85-14-080-16
85-14-100-16
85-14-120-16
85-14-140-16
85-14-160-16
85-14-180-16
85-14-200-16
85-14-220-16
85-14-240-16
85-14-260-16
85-14-280-16
85-14-300-16
Stainless
Steel
85-14-080-20
85-14-100-20
85-14-120-20
85-14-140-20
85-14-160-20
85-14-180-20
85-14-200-20
85-14-220-20
85-14-240-20
85-14-260-20
85-14-280-20
85-14-300-20
'F'
.525
.545
.565
.585
.605
.625
.645
.665
.685
.705
.725
.745
Wing Head
Total
Material
Thickness
.070-.089
.090-.109
.110-.129
.130-.149
.150-.169
.170-.189
.190-.209
.210-.229
.230-.249
.250-.269
.270-.289
.290-.309
Steel
85-12-080-16
85-12-100-16
85-12-120-16
85-12-140-16
85-12-160-16
85-12-180-16
85-12-200-16
85-12-220-16
85-12-240-16
85-12-260-16
85-12-280-16
85-12-300-16
Stainless
Steel
85-12-080-20
85-12-100-20
85-12-120-20
85-12-140-20
85-12-160-20
85-12-180-20
85-12-200-20
85-12-220-20
85-12-240-20
85-12-260-20
85-12-280-20
85-12-300-20
'F'
.525
.545
.565
.585
.605
.625
.645
.665
.685
.705
.725
.745
Retainers
Split Ring
Stainless
Push-On
Stainless
Part#
82-32-101-20
85-34-101-20
CupWasher
Nylon
Part#
82-32-201-20
85-34-201-20
Part#
82-46-101-39
85-46-101-39
Alt Part#
NAS1515-H-4L
NAS1515-H-5L
Receptacles
#82 - 3/32 Rivets - .750 Spacing
#85 - 1/8 Rivets - 1.0 Spacing
Leaf Spring with Base
Leaf Spring without Base
Part#
82-35-302-15
85-35-295-15
85-35-295-20
Part#
82-35-295-15
82-35-295-20
Material
Steel
Steel
Stainless
Copyright 2016
Page 52
Material
Steel
Stainless
Rev
Revisions
By
Date
A
New Drawing
NCB
4/10/09
B
New Part#s
NCB
11/30/11
C
Added Steel designation
NCB
11/21/13
Example Part #s
MS21078-3 12L14 Steel ASTM A29, A108 - Yellow Zinc plate
MS21078-3A 6061 T651 Aluminum ASTM B221-12 - No plating
Standard Anodizing per MIL-A-8625, Type II, Class 2:
MS21078
Marking
AN366
NAS1032
MS21078-04
4
NA
NAS1023N04 #440 3/32 Rivets 11/16 Spacing 750 Axial Load
Add 'A' for Black Anodize (MS21078-04AA)
Lbs (alum) Grams (alum)
.0035
1.587
MS21078-06
6
AN366-F632
.0035
1.587
MS21078-08
2 or 8
AN366-F832
.0035
1.587
MS21078-3
3
AN366-F1032
NAS1023N3
.0035
1.587
MS21078-3-8
3
NA
NA
Add 'A' for Black Anodize (MS21078-3AA8)
.0035
1.587
MS21078-324
24 or 34
.0035
1.587
MS21078-324-8
24 or 34
Add 'A' for Black Anodize (MS21078-324AA8)
.0035
1.587
MS21078-420-8S
20
Add 'A' for Black Anodize (MS21078-420AA8S)
.0045
2.041
MS21078-420-8L
20
Add 'A' for Black Anodize (MS21078-420AA8L)
.0045
2.041
NA
NA
MS21078-428-L
28
AN366-F428
NAS1023N4
Add 'A' for Black Anodize (MS21078-428AAL)
.0055
2.041
MS21078-428-8S
28
NA
NA
Add 'A' for Black Anodize (MS21078-428AA8S)
.0055
2.041
MS21078-428-8L
28
NA
NA
Add 'A' for Black Anodize (MS21078-428AA8L)
.0055
2.041
Bold indicates normally stocked in steel. Shaded indicates normally stocked in aluminum.
Material
Alum - 6061 T651 ASTM B221-12
Steel - 12L14 ASTM A29, A108
Scale
Weight
Heat Treatment
None
Drawn by:
NA
C.Osorios
Skybolt Aeromotive Corporation
9000 Airport Blvd Leesburg, FL 34788
Title
Platenut - Nylon Insert
Checked by: N. Bowers
Finish
Tolerances Unless
Otherwise Specified
Surface Finish
Anodize (Option) MIL-A-8625 TypeII, Class2 Black. Steel - Yellow Zinc ASTM-B-633
2 Place Dec. +/- .02
3 Place Dec. +/- .010
125 Unless Specified
Angular
Dimensions
+/- 1 Deg
Drawing No
MS21078
C
This document is proprietary and confidential and it may not be copied. Upon written request, it must be returned to Skybolt Aeromotive Corp.
All structural designs, technical data, and engineering services represented thereby and originated or rendered herein are considered to be
trade secrets which are exclusive property of Skybolt Aeromotive Corp. and any reproduction, disclosure, or use is prohibited except with
express written consent of Skybolt Aeromotive Corp.
Page 52.1
Skybolt MS21078 Skytanium Series Platenut
Meet or Exceed Steel Axial Strength (LBS)
H
G Dia
K
Prior to
H
Thread
T
A
B
C +/-.005
F Min
+/-.010
Rivet
Crimp
Final
J
V
D
MS21078-04
4-40 UNJC-3B
.970
.404
.344
.115
.200
3/32
.230
.215
11/16
.068
.373
MS21078-06
6-32 UNJC-3B
.970
.404
.344
.115
.200
3/32
.270
.255
11/16
.068
.373
MS21078-08
8-32 UNJC-3B
.970
.404
.344
.115
.200
3/32
.300
.285
11/16
.068
MS21078-3
10-32 UNJF-3B
.970
.404
.344
.115
.200
3/32
.314
.295
11/16
.068
MS21078-3-8
10-32 UNJF-3B
.970
.406
.344
.115
.200
1/8
.314
.295
11/16
MS21078-324
10-24 UNJC-3B
.970
.406
.344
.115
.200
1/8
.314
.295
MS21078-324-8
10-24 UNJC-3B
.970
.406
.344
.115
.200
1/8
.314
MS21078-420-8S
1/4-20 UNJC-3B
.970
.406
.344
.115
.200
1/8
MS21078-420-8L
1/4-20 UNJC-3B
1.296
.516
.500
.115
.200
MS21078-428-L
1/4-28 UNJF-3B
1.296
.516
.500
.115
MS21078-428-8S
1/4-28 UNJF-3B
.970
.406
.344
.115
MS21078-428-8L
1/4-28 UNJF-3B
1.296
.516
.500
.115
Part#
E Prior
to Crimp
L
.373
.090
.290
.373
.125
.305
.068
.373
.125
.305
11/16
.068
.373
.125
.305
.295
11/16
.068
.373
.125
.305
.314
.295
11/16
.068
.373
.380
1/8
.375
.250
1.000
.068
.465
.380
.200
1/8
.375
.250
1.000
.068
.465
.380
.200
3/32
.375
.250
11/16
.068
.465
.380
.200
1/8
.375
.250
1.000
.068
.465
.380
C
Page 52.2
Rev 102213
Skybolt Stainless Cowling Fastener Replacement Kits (TSO-C148)
Stainless Cowling Kits replace the old, worn and rusted parts originally installed on your cowlings and access panels with exclusive
Skybolt CLoc®, ZLoc®, or ALoc® style stainless fasteners. Many kits depicted may only replace certain portions of the engine
cowling. Optional kits to complete all panels are available.
The unique Skybolt Cowling Fastener Replacement Kits were developed over a span of 5 to 6 years utilizing Parts Manuals (IPC),
field research, and customer feedback. We soon discovered that the Parts Manuals were very inaccurate and relied more on field
experience. Despite exhaustive data, we also discovered that no two aircraft were ever the same. The Skybolt Cowling Fastener Kits
will usually contain more of a selection than the aircraft may actually require so that a replacement project can efficiently move from
start to finish. Like the Trim and Fuel Tank Kit development, many companies began to copy the Skybolt Cowling Kit product line
only to discover just how difficult it is to understand each and every production aircraft produced from the 1940s to date. Without the
supporting data to back up the fasteners required on most aircraft, the copy kits can supply about 70% of the required hardware.
Skybolt’s goal is 100% in all of our kits. Cowlings are our business. As many of these kits can cost hundreds of dollars, you deserve
the best product on the market and a company that can stand by your investment for as long as you own the aircraft.
Skybolt Stainless Cessna Cowling Conversion Kits (STC’d)
Skybolt 2800 Series Kits convert early Screw Cowlings to the Skybolt developed CLoc® SK25S4S Fastener. Skybolt 203 Series Kits
convert all Platemount Cowlings to the CLoc® SK40S5 Fastener. Skybolt 4th Generation Conversion Kits (Southco® to CLoc®)
utilize the new 2013 SK2003-42A Platemount (patent 7,997,843 and 8,282,329) with SK245-4 Series Adjustable Receptacles. With
30 years experience maintaining these cowlings, our developments address the “flex” feature unique to the J7444-42 Lord® mounts;
our template based alignment process; and our (patented) SK2003-AW4 Camwashers easily position mounts for alignment in even
extreme applications.
Skybolt Stainless Beech Bonanza Cowling Replacement and
Conversion Kits (STC’d) Skybolt Stainless Bonanza Kits offer direct component replacement for Dzus®
Fasteners in the Upper Cowl and/or the Airloc® Fasteners in the Lower Cheek Cowling. Bonanza Conversion Kits replace old school
Dzus® and Airloc® Fasteners with CLoc® Fasteners for much improved performance and appearance. STCd for TC A777 & 3A15.
Skybolt Stainless Trim Kits
Trim Kits were created in the early 1980s as a convenient and cost effective
hardware selection for non-structural exterior access panels and fairings. Note: Some aircraft depict structural panels (Some Mooney
and KingAir wing panels). Skybolt supplies structural steel (AN509 Series) screws for these panels as AN509 stainless screws are not
structural equivalent to the steel AN509 screws.
Skybolt Stainless Fuel Tank Kits
Fuel Tank Kits offer the structural (and non-structural) screws
common to fuel tanks in most production aircraft. Kits are sold Per Tank (1 Tank per Kit)
The following charts depict most production aircraft with cross reference to most panel specific kits offered by Skybolt.
Copyright 2013
Page 53
041116
Cowling Fastener Replacement Kits - Production Aircraft
COMMANDER COWLING KITS
Cowling Kit
AC500-C1
AC500-C1P
AC500-C2
AC500-C2P
AC500-C2A
AC500-C2AP
AC500-C3
AC500-C3P
AC500-C4
AC500-C4P
500,520,560,720
680, 680E Round Cowl
500A,B,U,560F,680
560FP,FL,FLP Flat Cowl
685
500S
Shrike
690 72-85
695 80-85
Options AC690-NA1S
AC690-NA1P
Serial #
All 52-60
All 60-69
12000 thru 12066 72-74
1755 thru 3327 68-80
11001 thru 11565, 15001 thru 15042
95000 thru 95084, 96000 thru 96208
BEECH COWLING KIT
Cowling Kit
Model
BM-C1
BM-C1P
BM-C2
BM-C2P
B35UC530
Options
B35LC2090
Options
B35LC5080
Options
B35LC5100
Options
B35UC40S
B35UC40P
B35LC27S
B35LC28P
B35LC40S
B35LC40P
Serial #
Muskwteer23,A,B,24
M901-1284 63-69, MA1-MA363 66-69
Sport 150
MB1-480
Later Musketeer,Sport,
M1285 On,MA364 On, MB481-905,
Sundowner, Sierra
M1362-2392, MC2 On
33
CD1-CD1234 60-67
C33A,E33A
CE1-CE289 66-69
35
D1 thru 9068 47-69
See B35UC40S Stainless CLoc Conversion Slotted
See B35UC40P Stainless CLoc Conversion Phillips
33
CD1 thru 350 60-67
35
D1 thru 6567 47-61
See B35LC28S Stainless CLoc Conversion Slotted
See B35LC28P Stainless CLoc Conversion Phillips
33
CD351-CD1304 61-67
C33A,E33A,F33A
CE1-On 66-87
F33C
CJ26 On 70
N35-V35A
D6568-9068 61-69
36
E1-E424 68-73
V35B
D9069 On 70-82
36
E425 On 73-87
36TC
EA1 On 79-87
33
All
35
D1 thru 9068
33
All
35
D1 thru 9068
33
CD1 thru 350
35
D1 thru 6567
33
CD1 thru 350
35
D1 thru 6567
33
CD351 On
35
D6568 On
33
CD351 On
35
D6568 On
Copyright 2016
Pages 54-61
Description
Engine Cowlings CLoc Slotted
Engine Cowlings CLoc Phillips
Nose Access Panels CLoc Slotted
Nose Access Panels CLoc Phillips
Description
Engine Cowlings Cloc Slotted
Engine Cowlings Cloc Phillips
Engine Cowlings Slotted
Engine Cowlings Phillips
Upper SKAJ5 Stainless Replacement
Lower Airloc Stainless Replacement
Upper SK4002S Slotted Conversion
Upper SK40S5S Phillips Conversion
Lower SK2700S Slotted Conversion
Lower SK27S3S Phillips Conversion
Lower SK4002S Slotted Conversion
Lower SK40S5S Phillips Conversion
041116
BEECH COWLING KIT - Continued
Cowling Kit
Model
B50-C1
B55-C1
B55-C1P
All B50 Twin Bonanza
All 55 Baron
Baron 58P & TC
Options B55-NC
B55-EP
B55-NP1
B55-EPD
B55-RAD
B55-BD
B55-FG
B55-AFP
B55-AS1
B55-AS2
B55-C2
B55-C2P
B56-C1
B56-C1P
B60-C1
B60-C1P
Baron 58P & TC
Options B55-NP1
B55-EPD
B55-RAD
B58P-AS1
Baron 56TC
Baron 56TC
Options B55-NC
B55-NP2
B55-EPD
B55-RAD
B55-AS3
Duke
B76-C1
B76-C1P
B95-C1
Options B60-LP1S
B60-LP1P
B60-LP2S
B60-LP2P
Dutchess
Dutchess
Travel Air 95
VIK-C1
Options B55-NC
B95-AFP
B55-RAD
B55-RAD
B95-NAP
Bellanca Viking
CESSNA COWLING KIT
Cowling Kit
Model
C150
C150-C1
C150-C1P
C152-C1
C152-C1P
C152-C2
C152-C2P
C172
C172-C1
C172-C1P
C172-C2
C172-C2P
150-150F
C150G-M, A150
Serial #
H1 thru DH347 52-62
All 61-82
B55 Only
TE-1 thru TE-451 Only
C,D,E TE-1 thru TE-1078 Only
B58 TH-1 thru TH-740
E55 TE-1079 Up
B58 TH-741 Up
58P/TC TJ3 On, TK1 On 76-86
TG-1 thru TG-94 67-71
P4-P597 68-82
P4-144
P145-246
ME-1 thru ME-437 78-82
TD-2 thru TD722 58-68
Some Serial Numbers
TD-1 thru 302
TD-534 thru 614
TD-615 On
TD-615 On
300000 thru 301031 67-01
81196-86035, 0780-1049 Late 78-86
C172-172G
28000-54892 56-66
C172H-P
54893-75034 67-81
C172H-P
Options C100-EAD3
C100-EAD4
No STC
SK2003-14-11
See SK203C172P Conversion Kits
C172P,Q
75035-76079,75869-76079 82-83
Options SK2003-14-11
See SK203C172PQ Conversion Kits
Air Scoops #2 and #5 ALoc
Engine Side Panels Slotted
Engine Side Panels Phillips
Nacelle Panels #4 ZLoc
External Power Door #4 ZLoc
Radome #5 ALoc
Air Scoops #4 ZLoc
Lower Nose Cowling #5 ZLoc
Nacelle Panels #2 ALoc
Radome #5 ALoc
Lower Panels Slotted
Lower Panels Phillips
Lower Panels Slotted
Lower Panels Phillips
Engine Cowling Latch Studs, Scoop, Access Door
Nose Access Door Latch Studs, L Rear Fuselage
Aft Fuselage Panels #5 ALoc
Radome #5 ALoc
Radome #5 ALoc
Nose Access Panel
Engine Cowling CLoc Slotted
Engine Cowling CLoc Phillips
February 19, 2014
Serial#
17001-64532 59-66
64533-79406 67-77
C152, A152
79406-81195, 0735-0779 Early 78
C152, A152
Description
Cowling,Air Filter,All Covers - Zloc and Aloc
Engine Side Panels - Slotted
Engine Side Panels - Phillips
Filter Access Panels #4 ZLoc
Nacelle Panels #4 ZLoc
Radome #5 ALoc
Baggage Door #5 ALoc Wing
Fuel Gauge Panels #5 ALoc
Aft Fuselage Panel #5 ALoc
Copyright 2016
Pages 54-61
Description
See C150C2800P Conversion Kit
Engine Cowling Slotted
Engine Cowling Phillips
10 ea SK2003-14A Mounts
Engine Cowling/Ext Pwr Slotted
Engine Cowling/Ext Pwr Phillips
See C172C2800P
Engine Cowling Slotted Southco
Engine Cowling Phillips Southco
Engine Access Door Kit (Original)
Engine Access Door Kit (CLoc Conv)
Engine Cowling/Ext Pwr Slotted Southco
Engine Cowling/Ext Pwr Phillips Southco
041116
CESSNA COWLING KIT - Continued
C172-C3
C172-C3P
C172-C4
C172-C4P
C172-C5
C172-C5P
C172-C6
C172-C6P
C172-C8
C175
C177-C1
C177-C1P
C180
C180-C1
C180-C1P
C180-C2
C180-C2P
C182
C182-C1
C182-C1P
C182-C2
C182-C2P
C182-C3
C182-C3P
C182-C4
C182-C4P
C182-C5
C182-C5P
C182-C6
C182-C6P
C182-C7
C182-C7P
C172P,Q
76080-76516 84-86
See SK203C172PQ Conversion Kits
C172P
76517 On 86-On
HawkXP,XPII
R172-2000-3454 77-81
See SK203C172PXP Conversion Kits
Cutlass RG
All 80-85
C172R & S
80001-On, 8001 On 96 On
C175
All 58-62
C177
All 71-81
C177RG
All
C180-180C
30002-50911 53-60
C180
50912-52284 61-72
C185
0001-02090
Options C100-EAD5
C100-EAD4
No STC
C100-AF1
C100-EPD1S
C100-EPD1P
C180
52285-53203 73-85
C185
02091 On
Options C100-EAD5
C100-EAD4
No STC
C100-AF1
C100-EPD1S
C100-EPD1P
C182-182C
33000-53007 53-60
C182
53008-53598 61
Options C100-AF1
C100-EPD1S
C100-EPD1P
C182E-M
53599-60055
Options C100-EPD1S
C100-EPD1P
C182N-P
60056-61425 70-72
Options C100-EPD1S
C100-EPD1P
C182P-R
61426 On 73-86
62-69
Options C100-EPD1S
C100-EPD1P
SK2003-24-14
T182,R,TR,RG
All 78-86
Options C100-EPD1S
C100-EPD1P
182, 182T
Non-Turbo
T182
Turbo
80001-On 97-On
08001-On 97-On
Copyright 2016
Pages 54-61
Description
Engine Cowling Slotted 2700/4002
Engine Cowling Phillips 2700/4002
Engine Cowling/Ext Pwr Phillips
Eng Cowling/Air Box/Ext Pwr Phillips
Engine Cowling Slotted Southco
Engine Cowling Phillips Southco
Engine Access Door (Original)
Engine Access Door (CLoc Conv)
Air Filter Kit
External Pwr Door (Slotted)
External Pwr Door (Phillips)
Engine Access Door (Original)
Engine Access Door (CLoc Conv)
Air Filter Kit
Air Filter Kit
Eng Cowling/Filter Frame Slotted
Eng Cowling/Filter Frame Phillips
Eng Cowling/Filter Frame Slotted
Eng Cowling/Filter Frame Phillips
041116
C188-C1
C188-C1P
C205-C1
C205-C1P
C206-C1
C206-C1P
C206-C2P
C207-C1
C207-C1P
C208-C1P
C210-C1
C210-C1P
C210-C2
C210-C2P
C210-C3
C210-C3P
C210-C4
C210-C4P
C303-C1
C303-C1P
C310-C1
C310-C1P
C310-C2
C310-C2P
C310-C3
C310-C3P
C310-C5
C310-C5P
C336-C1
C336-C1P
C337-C1
C337-C1P
C340-C1
C340-C1P
C188
All 66-83
C100-EPD1S
C100-EPD1P
C188-RSP1
C205
C206
U,TU206
TP206
Options C200-2800
C200-28S3
U206,TU
0001-0577 63-64
0001-0275 64
0276-06846 65-84
0191-0647 65-70
No STC
No STC
06847 On 85-86
Options C200-2800
C200-28S3
C206, T206
C207,T207
No STC
No STC
08000-On 97-On
00001-00788 69-84
Options C200-2800
C200-28S3
C208
C210,A-N
T210F-L
C210L-N With A/C
T210N
P210N
T210R
P210R
C210R
No STC
No STC
All 85-On
57001-64535 60-73
0001-60089
60090-64897 74-84
60090-64897 74-84
00001-00834 78-83
64898-65009 85-86
0835-0874 85-86
64898-65009 (no Turbo) 85-86
C303 Crusader
00001-00315 82-84
C310
35000-35546 54-57
Options C300-BA1
C300-OAD1S
C300-OAD1P
C310B,C,D
35655-39299 58-60
Options C300-BA1
C300-OAD1S
C300-OAD1P
C310E-Q (No Turbo)
C320A-F (Turbo)
Options C300-BA3
C300-NA1S
C300-NA1P
C300-OAD1S
C300-OAD1P
C310P,Q (Turbo),R
All P,Q(Turbo),R 69-81
Options C300-BA3
C300-NA1S
C300-NA1P
C336
No C310R
No C310R
0001-0195 63-64
C337
C337P
Options C300-NA2
C300-NA3S
C300-NA3P
C340,A
All SN 61-74
All SN 62-68
K thru Q Only
K thru Q Only
0002-01951 65-80
0001-0356
1965-1972 F Model
1973-1980 G-On
0001-1817 72-84
Options C300-NA4S
C300-NA4P
Copyright 2016
Pages 54-61
Description
Engine Cowling - Slotted
Engine Cowling - Phillips
Fuselage ZLoc
Engine Cowling/Ext Pwr Door - Slotted
Engine Cowling/Ext Pwr Door - Phillips
Belly Panel (CLoc Conv-Slotted)
Belly Panel (CLoc Conv-Phillips)
Engine Cowling/Ext Pwr - Slotted
Engine Cowling/Ext Pwr - Phillips
Engine Cowling/All Panels - Phillips
Engine Cowling/Ext Pwr - Slotted
Engine Cowling/Ext Pwr - Phillips
Phillips
Engine Cowing/Ext Pwr Phillips
Eng Cowlings/Oil Door/Access Door Slotted
Eng Cowlings/Oil Door/Access Door Phillips
Battery Access Panel
Oil Access Door - Slotted
Oil Access Door - Phillips
Nose Access Panel - Slotted
Nose Access Panel - Phillips
Eng Cowlings/Access Door Slotted
Eng Cowlings/Access Door Phillips
Eng Cowlings/Ext Pwr/Access Door Slotted
Eng Cowlings/Ext Pwr/Access Door Phillips
Avionics Panel
Avionics Panel - Slotted
Avionics Panel - Phillips
Engine Cowlings - Collared Slotted
Engine Cowlings - Phillips
041116
C400-C1
C400-C1P
C400-C2
C400-C2P
Options
C401,A 402,A
Options C400-NF1
C400-BA1S
C400-BA1P
C400-NP1S
C400-NP1P
C400-NP2S
C400-NP2P
C400-NP3S
C400-NP3P
C402C
C414-C2
C414-C2P
C421-C1
C421-C1P
67-78
402A0001-0046
402A0047-On
402B
402C0001-0808 79-85
C400-NF1
C400-BA1S
C400-BA1P
C400-NP4S
C400-NP4P
C400-NP5S
C400-NP5P
C404 Titan
0001-0859 77-81
Options C400-BA2S
C400-BA2P
C400-CP1S
C400-CP1P
C400-NP4S
C400-NP4P
C400-NP5S
C400-NP5P
C414, 414 II
0001-0965 70-77
C404-C1
C404-C1P
C414-C1
C414-C1P
All
Options C400-NF1
C400-BA1S
C400-BA1P
C400-CP2S
C400-CP2P
C400-NP6S
C400-NP6P
C400-NP7S
C400-NP7P
C414A Chancellor
C414A III
Options C400-NF1
C400-BA1S
C400-BA1P
C400-CP2S
C400-CP2P
C400-NP6S
C400-NP6P
C400-NP7S
C400-NP7P
C411,421,A,B
0001-1212 78-85
0001-0970 68-75
Options C400-RAD1S
C400-RAD1P
C400-BA2S
C400-BA2P
C400-NP8S
C400-NP8P
Copyright 2016
Pages 54-61
Description
Engine Cowlings/Oil Access Door Slotted
Engine Cowlings/Oil Access Door Phillips
Nacelle Panels & Fairing
Battery Access Panel - Slotted
Battery Access Panel - Phillips
Nose Panel - Slotted
Nose Panel - Phillips
Battery Access Panel - Slotted
Battery Access Panel - Phillips
Nose Panel - Avionics Door - Slotted
Nose Panel - Avionics Door - Phillips
Nose Panel - No Avionics Door - Slotted
Nose Panel - No Avionics Door - Phillips
Inverter/Battery Panel Slotted
Inverter/Battery Panel Phillips
Bottom Cowling Panels Slotted
Bottom Cowling Panels Phillips
Nose Panel with Avionics Door Slotted
Nose Panel with Avionics Door Phillips
Nose Panel with no Avionics Door Slotted
Nose Panel with no Avionics Door Phillips
Engine Cowlings/Oil Doors Slotted
Engine Cowlings/Oil Doors Phillips
Radome Slotted
Radome Phillips
Battery Access Panel Slotted
Battery Access Panel Phillips
Nose Panel - No Avionics Door Slotted
Nose Panel - No Avionics Door Phillips
041116
C421-C2
C421-C2P
C425-C1
C425-C1P
C441-C1
C441-C1P
C500-C1
C500-C1P
C500-C2
C500-C2P
C421C
Options C400-OD1S
C400-OD1P
C400-BA2S
C400-BA2P
C400-NP6S
C400-NP6P
C400-NP7S
C400-NP7P
C425
Options C400-NP6S
C400-NP6P
C400-NP7S
C400-NP7P
C441
Options C400-NP6S
C400-NP6P
C400-NP7S
C400-NP7P
CIT I,II
CIT III
CHAMP-CITABRIA-DECATHLON
Cowling Kit
CIT-C1
DEK-C1S
DEK-C1P
Champ and Citabria
Options CIT-4000S
CIT-4000P
Decathlon
MERLIN COWLING KITS
Cowling Kit
MERLIN-C1
MERLIN-C1P
MERLIN-C2
MERLIN-C2P
IIA SA26AT
Options MER-NP1S
MER-NP1P
IIIA SA226-T
0001-1807 76-85
Conquest I & Corsair(PT6) 81-86
425-0001-0236
Conquest, II(TPE-331) 78-86
441-0001-0362
All
72-94
0002-0206 83-91
Serial #
All
No STC
No STC
All
Description
Engine Cowling Southco Slotted
Engine Cowling Cloc Conversion Slotted
Engine Cowling Cloc Conversion Phillips
Serial #
T26-100 thru 180 68-70
Description
Nose Panel Cloc Slotted (if installed)
T-200 thru 536 70-86
Options MER-NP1S
MER-NP1P
MITSUBISHI COWLING KITS
Cowling Kit
DIAMOND-C2S
DIAMOND-C2P
MU2-C1
MU2-C1P
MU2-C2
MU2-C2P
MU2B-P/Solitaire
Serial #
A003 thru A091,A1001 thru A1008
82-85
6 thru 459 67-85
MU2 Marquise
700 thru 1569 79-85
Diamond Jet
MOONEY COWLING KITS
Cowling Kit
M20-C2
M20-C2P
1965 M20
Serial #
C,D,E,F 65
Description
Engine Cowling/Wing Panels CLoc Slotted
Engine Cowling/Wing Panels CLoc Phillips
Engine Cowling/Wing Panels CLoc Slotted
Engine Cowling/Wing Panels CLoc Phillips
Description
Battery Access Panel Southco Slotted
Battery Access Panel Southco Phillips
Options M20-BAT1S
M20-BAT1P
Description
Oil Drain Door Slotted
Oil Drain Door Phillips
Copyright 2016
Pages 54-61
041116
MOONEY COWLING KIT - Continued
M20-C3
M20-C3P
M20-C5
M20-C5P
M20-C6
M20-C6P
M20-C6A
M20-C6AP
M20-C7
M20-C7P
1966 On M20
C,D,E,F,G 66-On
Options M20-BAT1S
M20-BAT1P
201
24-0001-1458 77-84
Options M20-BAT1S
M20-BAT1P
M20-BP1S
M20-BP1P
201
24-1459 On 77-87
Options M20-BAT2S
M20-BAT2P
M20-BP1S
M20-BP1P
231
25-0001 On 79-85
Options M20-BAT1S
M20-BAT1P
M20-BP1S
M20-BP1P
252
All 85-On
Options M20-BAT2S
M20-BAT2P
PIPER COWLING KITS
Cowling Kit
Model
PA18-C1
PA18-C2
PA18-C3
PA23-C1
PA23-C1P
PA23-C2
PA23-C2P
PA23-C3
PA23-C4
PA23-C4P
PA28-C1
PA28-C1P
Super Cub
Super Cub
Super Cub
PA23-150
PA23-160
PA23-235
PA23-250
Options PA-NP1S
PA-NP1P
PA-NP2S
PA-NP2P
PA-NP3S
PA-NP3P
PA-FD1W
PA23-250, Early C
Options PA-NP2S
PA-NP2P
PA-NP3S
PA-NP3P
PA-FD1W
PA23-250, Later C-F
Options PA-NAC1S
PA-NAC1P
PA-NP2S
PA-NP2P
PA-NP3S
PA-NP3P
PA-FD1W
PA28-201T,
PA28RT-201T
Description
Belly Access Panel CLoc Slotted
Belly Access Panel CLoc Phillips
Battery Access Panel CLoc Slotted
Battery Access Panel CLoc Phillips
Battery Access Panel CLoc Slotted
Battery Access Panel CLoc Phillips
Serial #
Description
105 HP 50-83
125 Up HP 50-83
Continental 50-83
PA23-5 thru 23-1163 54-57
PA23-1164 thru 23-2040 58-62
PA27-505 thru 622 62-65
PA27-3 thru 27-2504 60-64
Apache & Aztec No Six Place
Engine Cowling/Oil Door/Fuel Drain Slotted
Engine Cowling/Oil Door/Fuel Drain Phillips
Engine Cowling/Oil Door/Fuel Drain Slotted
Engine Cowling/Oil Door/Fuel Drain Phillips
Nose Panels Slotted
Nose Panels Phillips
Nose Panels Slotted
Nose Panels Slotted
Fuel Doors Wing
Eng Cowling/Fuel Drain - Southco Slotted
Nose Panels Slotted
Nose Panels Slotted
Fuel Doors Wing
Eng Cowling/Fuel Drain - CLoc Slotted
Eng Cowling/Fuel Drain - CLoc Phillips
Nacelle Panels Slotted
Nacelle Panels Phillips
Nose Panels Slotted
Nose Panels Slotted
Fuel Doors Wing
Aztec Six Place No Ice Shields
Aztec Six Place With Ice Shields
PA27-2505 thru PA27-2736 64
No Ice Shields
With Ice Shields
27-2737-4866,7304917-8154029
C - early E 64-72, later E - F 73-81
SN 27-4426, 27-4574 On
No Ice Shields
With Ice Shields
All 77-78
All 79-80
Copyright 2016
Pages 54-61
041116
PIPER COWLING KITS - Continued
Cowling Kit
Model
PA30-C1
PA30-C2
PA30-C2P
PA32-C1
PA32-C1P
PA34-C2
PA34-C2P
PA34-C3
PA34-C3P
PA34-C4
PA34-C4P
PA44-C1
PA44-C1P
PA46-C1
PA46-C1P
PA600-C1
PA600-C1P
PA700-C1
PA700-C1P
PA30 T Comanche
Options PA30-NP1
PA30-2701S
PA30-2701P
PA30-2702S
PA30-2702P
PA30,39
Options PA30-NP1
PA30-2702S
PA30-2702P
PA32-301T Saratoga
PA32R-301T Saratoga
PA34-200T Seneca II
Options PA34-OPTIONS-1S
PA34-OPTIONS-1P
Seneca II,III,IV
Serial #
30-1 thru 793, 799 thru 901 63-65
No STC
No STC
No STC
No STC
794-798,902 Up, PA39-1 thru 155
PA30 65-69, PA39 70-72
No STC
No STC
All 80-On
7570001-7970001 75-78
II 34-7970002-8170092,
III 34-8133001 34-48033, IV All
PA34-OPTIONS-1P
Seneca V
7970002 Up 79-93
PA34-OPTIONS-4P
Seminole
All 79-On
Malibu
All 84-On
PA60-600 Aerostar
PA601P, 602P
PA60-700P Aerostar
PA60-3 thru 836521 68-83
PA60-8423001 Up 83-84
Copyright 2016
Pages 54-61
Description
Engine Cowling Southco Slotted
Nose Panel Southco Slotted
Engine Cowling CLoc Conversion Kit Slotted
Engine Cowling CLoc Conversion Kit Phillips
Nose Panel CLoc Conversion Kit Slotted
Nose Panel CLoc Conversion Kit Phillips
Nose Panel Southco Slotted
Nose Panel CLoc Conversion Kit Slotted
Nose Panel CLoc Conversion Kit Phillips
Engine Firewall CLoc Slotted
Engine Firewall CLoc Phillips
Turtleback CLoc Slotted
Turtleback CLoc Phillips
Engine Cowlings Avionics Panel CLoc Slotted
Engine Cowlings Avionics Panel CLoc Phillips
Engine Cowlings Avionics Panel CLoc Slotted
Engine Cowlings Avionics Panel CLoc Phillips
I:/Pricelist/KIT INDEX.xls
Cowling
Kit
Kit
Description
Conversion
Kit
Kit
Description
None
C150C2800P
SK25S4S Phillips
40S5S Phillips
with Doublers
CESSNA
Serial#
Original
Fastener
C120/140
C150
All
17001-64532
Screws
None
None
C150G-M
67-On
A150 K-M Aerobat (and Commuter)
70-77
64533-On
Southco
C150-C1P
Phillips Southco
SK203C150P4
SK3203C150P4D
C152 78
79406-82031
Camloc 40S5
82032 On
Collared Slotted
Phillips
Collared Slotted
Phillips
None
C152 79-85
C152-C1
C152-C1P
Camloc 40S5 C152-C2
C152-C2P
C170
C172
56-66
All
28000-54892
Screws
None
None
C172H-P
54893-75034
Southco
C172-C1P
Standard Cowl - All Southco
75035-76079
Southco/40S5
Trim
Kit
Fuel Tank
Kit (1 Tank)
C-120/140
C-150/152
None
C150-FT1
C150-FTLR
C-170
C-172/172RG
None
C172-FT1
None
None
C172C2800P
SK25S4S Phillips
Phillips Southco
SK203C172P4
40S5S Phillips
Slotted Southco
Phillips Southco
Slotted 2700/4002
Phillips 2700/4002
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Phillips
SK203C172PQ4
40S5S Phillips
67-81
C172P,Q
80-83
C172P,Q
84-85
C172P
86
HawkXP,XPII
77-81
Cutlass RG
80-85
C172R
C172S
1997-On
C172-C2
C172-C2P
76080-76516
27S3/40S5
C172-C3
Camloc 4002 across nose - remainder Southco
C172-C3P
76517 On
40S5
C172-C4
C172-C4P
R172-2000-3454
Southco/40S5 C172-C5
Southco-firewall,4002 nose/center split
C172-C5P
All
40S5
C172-C6
C172-C6P
80001 On
Lord/40S5
C172-C8P
SK203C172PXP4
40S5S Phillips
None
SK203C172P-RS4
40S5S Phillips
C175C2800P
SK25S4S Phillips
C-172/172RG
C172-FT1
SK203C177P4
40S5S Phillips
C-177/177RG
None
C180C2800P
SK25S4S Phillips
C-180/185
C180-FT1
None
C-180/185
C180-FT1
None
C-180/185
C180-FT2
None
C-180/185
C180-FT2
None
C-180/185
C180-FT2 or FT3
Verify Fastener On Aircraft
8001 On
C175
58-62
55001-57119
Screws
C177, A, B & RG
68-78
00001-02752
Southco
C177-C1P
C180 53-60
30000-50911
Screws
None
C180 61-62
50912-51183
40S5
C180 63-72
51184-52284
40S5
C180 73-78
52285-53000
40S5
C180 79-81
53001-53203
40S5
C180-C1
C180-C1P
C180-C1
C180-C1P
C180-C2
C180-C2P
C180-C2
C180-C2P
None
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Copyright 2013
Oct 22, 2013
Original
CESSNA (Continued)
C182, A-C 56-60
C182D 61
Serial#
33000-53007
53008-53598
Fastener
Screws
40S5
C182E-M 62-69
53599-60055
40S5
C182N-P 70-72
60056-61425
40S5
C182P-Q 73-78
61426-66590
27S3/40S5
C182, Q, R 79-86
66591-On
27S3/40S5
T182,R,TR,RG 80-86
201314-68541
40S5
C182S 97-00
C182T 01-On
182T 01-On
T182T 01-On
C185 61-72
80004-80944 Non-Turbo
8001 On Non-Turbo
80945 On Turbo
8001 On Turbo
0001-02090
40S5
C185 73-78
02091-03683
40S5
C185 79-82
03684-04368
40S5
C185 82-85
04369-On
40S5
C188 Agwagon
All
40S5
C205 63-64
C206 64
U,TU206 65-84
P,TP206 65-70
U206,TU 85-86
All
0001-0275
0276-06846
All
06847 On
40S5
C206, T206 97-On
C207,T207 69-84
08000-On
All
C208
C210, A 60-61
C210 B thru F 62-66
All
57001-57840
57841-58818
C210 G thru J 67-69
C210 K thru N 70-81
T210 F 66
58819-59199
59200-64535 No Air Cond
0001-0197
T210 G thru J 67-69
T210 K thru L 70-73
C210 N 80-81
C210,T210 N 82-84
T210 74-84
P210 N 78-83
T210(Turbo) 85-86
P210 R 85-86
C210 R 85-86 (Non Turbo)
0198-0454
59200-60089 No Air Cond
63953-64535 With Air Cond
64536-64897
60090-64897
0001-00834
64898 On
00835 On
64898 On N0turbo
40S5
40S5
35000-35546
C310 B,C,D 58-60
35655-39299
Kit
Description
None
C182-C1
C182-C1P
C182-C2
C182-C2P
C182-C3
C182-C3P
C182-C4
C182-C4P
C182-C4
C182-C4P
C182-C5
C182-C5P
C182-C6
C182-C6P
C182-C7
C182-C7P
C180-C1
C180-C1P
C180-C2
C180-C2P
C180-C2
C180-C2P
C180-C2
C180-C2P
C188-C1
C188-C1P
C205-C1
C205-C1P
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Conversion
Kit
Kit
Description
Trim
Kit
Fuel Tank
Kit (1 Tank)
C182C2800P
None
SK25S4S Phillips
C-182/182RG
C-182/182RG
C182-FT1
C182-FT1
C-182/182RG
C182-FT2
C182-FT2LR
C-182/182RG
C-182/182RG
C182-FT2
C182-FT2LR
C182-FT3
None
C-182/182RG
None
None
C-182/182RG
None
C-180/185
C180-FT2
C-180/185
C180-FT2
C-180/185
C180-FT2 or FT3
C180-FT2 or FT3
None
None
None
SK203C182P4
40S5S Phillips
C-180/185
None
C-Agwagon
C-206/207
C206-FT1
C206-FT1LR
C-208
C-210
C-210
C-210
C-210
None
C210-FT1
C210-FT2
C210-FT2LR
C210-FT3
C210-FT4
C210-FT2
C210-FT2LR
C210-FT3
C210-FT4
C210-FT4
C-310-1
(55-63)
C-310-2
(64-Up
C310-FT1
(310 thru K)
C310-FT1
(310 thru K)
Note: 1985 SN06847 Up Listed Below
40S5
40S5
C206-C1
C206-C1P
C206-C2P
C207-C1
C207-C1P
C208C1
C210-C1
C210-C1P
Collared Slotted
Phillips
Collared Slotted
Collared Slotted
Phillips
Phillips
Collared Slotted
Phillips
C-210
C-210
C-210
Note: Mid Year Change
40S5
40S5
C303 T303 Crusader
C310 55-57
Cowling
Kit
40S5
Note: SN Sequence Change
C210-C2
Collared Slotted
C210-C2P
Phillips
C210-C3
C210-C3P
C210-C4
C210-C4P
C303-C1
C303-C1P
C310-C1
C310-C1P
C310-C2
C310-C2P
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Check Conversions
Note: Check break in SN
Copyright 2013
Oct 22, 2013
Original
CESSNA (Continued)
Serial#
C310 E, F thru K 61-66
F0001-K0245
All Non-Turbo
N0001-N0198
All Non-Turbo
P0001-Q1160
All Non-Turbo
All
P0001-R2140
All Turbo
All
C310 L thru N 67-68
C310 P thru Q 69-74
C320A-E SkyKnight 62-68
C310P,Q,R 69-81
C336 Skymaster (Fixed Gear) 64
Fastener
C337 Skymaster 65-80
C340,A
All
C401,402,A,B
All
C402C
All
C404 Titan
All
C414
All
C414A Chancellor
All
C411
C421,A,B Golden Eagle
C421 C Golden Eagle
All
C425 Corsair/Conquest I PT6
All
C441 Conquest/II Garrett
All
CIT I,II Citation
All
CIT III Citation
All
All
Original
BEECHCRAFT
Serial#
Fastener
Musketeer23 63-66
M1-900
MS27039
Musketeer23A,B 66-69
M901-1284
40S5
Musketeer24 66-69
MA1-363
Sport150 66-69
MB1-480
Musketeer23C 70-On
M1285-1361
40S5
Musketeer24 70
MA364-On
Sport150 70-78
MB481-905
Sundowner 180 72-83
M1362-2392
Sierra 200 70-83
MC2-795
Debonair 33,A 60-61
CD1-CD350
Bonanza 35-N35 47-61
D1-D6567
(Models M-N Change from #2 Airloc to #5 Airloc on or about SN6567…..Check)
Debonair 33 A-C 61-67
CD351-CD1234
Debonair C33A,E33A 66-69
CE1-CE289
Designated Bonanza 68 E33, SN CD1119 68 E33A, SN CE180
Bonanza N-V35A 61-69
Cowling
Kit
Kit
Description
C310-C3
C310-C3P
C310-C3
C310-C3P
C310-C4
C310-C4P
Collared Slotted
Phillips
Collared Slotted
Phillips
C310-C5
C310-C5P
C336-C1
C336-C1P
C337-C1
C337-C1P
C340-C1
C340-C1P
C400-C1
C400-C1P
C400-C2
C400-C2P
C404-C1
C404-C1P
C414-C1
C414-C1P
C414-C2
C414-C2P
C421-C1
C421-C1P
C421-C2
C421_C2P
C425-C1
C425C1P
C441-C1
C441-C1P
C500-C1
C500-C1P
C500-C2
C500-C2P
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Cowling
Kit
Conversion
Kit
Kit
Description
Trim
Kit
Fuel Tank
Kit
C-310-2
C310-FT1
C310-FT2
C310-FT3
C-310-2
C310-FT3
None
C-336/337
C337-FT1
None
C-335/340
C340-FT1
None
C-401/402
C400-FT1
C-401/402
C402C-FT1
C-411/414
C414-FT1
C-411/414
C414-FT2
C-411/414
C-421
C-421
C411-FT1
C400-FT1
C400-FT1
Trim
Kit
Fuel Tank
Kit
Collared Slotted
Phillips
Collared Slotted
Phillips
Kit
Description
MS27039C
Conversion
Kit
Kit
Description
BM-C1S
BM-C1
BM-C1PH
BE-Musketeer
None
Collared Slotted
Phillips
None
BE-Musketeer
None
BM-C2
BM-C2P
Collared Slotted
Phillips
None
BE-Musketeer
(Sundowner)
None
B35UC530
B35LC2090
AJ5 Dzus-Upper
#2 Airloc - Gills
B35UC40P
B35LC28P
SK40S5 Upper
SK28S3 Lower Gill
BE-Bonanza
None
B35UC530
B35LC5080
AJ5 Dzus-Upper
#5 Airloc - Gills
B35UC40P
B35LC40P
SK40S5 Upper
SK40S5S Lower Gill
BE-Bonanza
None
D6568-D9068
Copyright 2013
Oct 22, 2013
Original
BEECHCRAFT (Continued)
Bonanza F33,G33 70-73
Bonanza F33A,F33C 70-On
Bonanza 36, A36 68-73
Bonanza V35B 70-82
Bonanza A36 73-87
A36TC,B36TC 79-87
Serial#
CD1235-CD1304
CE290-On, CJ26-30
E1-E424
D9069-10403 (5)
E425 On
EA1-On
Travelair 95 58-68
Baron 55,A55,B55,B55A
Baron C55, D55, E55
Baron 58
Baron 56
TD2-TD721
TC1 On
TE1 On
TH1 On
TG1-TG94
Baron 58P
Baron 58TC
Duke 60,A60 68-73
TJ3 On
TK1 On
P4-P246
Duke B60 74-82
Duke
Dutchess B76
P247-596
P247-On (3)
ME1-On
Fastener
No Kit for Upper
#5 Airloc - Gills Only
No Kit for Upper
B35LC40P
SK40S5S Lower Gill
B35LC5100
No Kit for Upper
No Kit for Upper
No Kit for Upper
B35LC40P
No Kit for Upper
B35LC40P
None
B55-C1
B55-C1P
Airloc
Collared Slotted
Phillips
None
See Cowling Kit Book for Options
See Cowling Kit Book for Options
BE-Travelair
BE-Baron55
None
None
B56-C1
B56-C1P
B55-C2
B55-C2P
B60-C1
B60-C1P
B60-C2
B60-C2P
B76-C1
B76-C1P
See Cowling Ref
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
See Cowling Kit Book Options
None
BE-Baron58
None
BE-Baron58
None
BE-Baron58
None
None
BE-Baron58
None
None
BE-Kingair
Steel Only AN509
None
Latch Upper
B35LC5100
Latch Upper
Fastener
PA-J3 Cub 45-47
PA-11 47-49
PA-12 Cruiser 46-47
PA-14 Cruiser 48
PA-16 Clipper 49
PA-18 Super Cub 50-83
PA-20 Pacer 50-54
PA22 TriPacer 51-63
PA23-150,160 Apache 54-61
18-1 thru 09025
20-3 thru 1121
22-1 thru 9848
23-1 thru 2041
PA23-235 Apache 62-65
PA23-250 Aztec, B 60-64
PA23-250 Aztec C 64
PA23-250 Aztec C-F 64-81
27-505 thru 622
27-1 thru 2504
27-2505 thru 2736
27-2737 thru 8154029
PA24-180 Comanche 58-64
PA24-250 Comanche 58-64
PA24-260 Comanche,B,C 65-68
PA24-400 Comanche 400 64-65
24-1 thru 3687
24-1 thru 3687
24-4000 thru 5028 On
26-3 thru 148
40S5
PA25 Pawnee,B,C,D 60-81
PA28-140 Cherokee 64-77
PA28-150/160 Cherokee 62-67
PA28-151 Warrior 74-77
PA28-161 Warrior 77-86
PA28-180 Cherokee 63-75
PA28R-180 Arrow 67-71
PA28-181 Archer 76-87
PA28-201T Turbo Dakota 79
25-3 thru 8156001 On
28-20001 thru 7725290
28-1 thru 4377 On
28-7415001 thru 7715314
28-7716001 thru 16099 On
28-671 thru 7505259
28R30004 thru 7135229
28-7690001 thru 8690021
28-7921002 thru 7921091
Latches
Latches
Latches
Latches
Latches
Latches
Latches
40S5
PA28-235 Charger,Pathf 68-77
PA28-236 Dakota 79-87
PA28R-200 Arrow 72-76
PA28R-201,T ArrowII,III 77-78
PA28RT-201,T Arrow IV 79-87
28-11040 thru 7710089
Latches
28-7911001 thru 8611004 On
Latches
28R723500 thru 7635545
Latches
28R7635001 thru 7803373
28R7918001 thru 86R8631001 On
Kit
Description
B35LC5080
Original
Serial#
Conversion
Kit
Latch Upper
King Air
Many Variations
PIPER
Cowling
Kit
Cowling
Kit
Kit
Description
Kit
Description
Conversion
Kit
None
BE-Bonanza
SK40S5S Lower Gill
PA-Apache
None
PA-Aztec
None
None
PA-Comanche
None
None
PA-Pawnee
PA-140-235
None
PA28-FT1
PA28-FT1
None
PA-140-235
PA-140-235
PA-Arrow
PA-Warrior
PA-Warrior
PA140-235
PA-Warrior
PA-Arrow
PA-Arrow
PA28-FT1
PA28-FT2
PA28-FT1
PA28-FT1
None
None
Slotted
Phillips
Slotted
Phillips
Southco
Collared Slotted
Phillips
None
Collared Slotted
Phillips
BE-Bonanza
SK40S5S Lower Gill
None
None
None
None
PA28-C1
PA28-C1P
None
PA-J3 Cub
PA-Super Cub
None
Collared Slotted
Phillips
BE-Bonanza
Fuel Tank
Kit
None
None
None
None
None
None
None
None
PA28-C1
PA28-C1P
None
Fuel Tank
Kit
Trim
Kit
None
PA23-C1
PA23-C1P
PA23-C2
PA23-C2P
PA23-C3
PA23-C4
PA23-C4P
Trim
Kit
None
None
Copyright 2013
Kit
Description
PA28-FT2
Oct 22, 2013
PIPER (Continued)
Serial#
Fastener
Cowling
Kit
PA30 Twin Comanche 63-65
30-1 thru 793,799-901
Southco
PA30-C1
Southco
PA30 Twin Comanche 66-68
PA39 Twin Comanche CR 70-72
PA31-300,310,325 Navajo 67-84
PA31-350 Chieftain 73-84
PA31P Press Navajo 70-77
PA31T Cheyenne I,II,III 78-84
PA42-720 Cheyenne III 80-87
PA32-260 Cherokee 6 65-78
PA32-300 Cherokee 6 65-78
PA32-300 Cherokee 6 79
PA32R-300, Lance 76-79
PA32R-300T Lance T Tail 78-79
PA32R-300T Turbo Lance T Tail
PA32-301 Saratoga 80-87
PA32R-301T Saratoga 80-87
PA34-200 Seneca 72-74
30-794 thru 798, 902 thru 2000
39-1 thru 152
31-2 On
31-7305001 thru 8452021
31P-3 thru 7730012
31T-7804001 On
42-7801001 On
32-1 thru 7800008
32-40000 thru 780222
32-7940001 Up
32R7680001 thru 7987126
32R-7885001 Up
32R-7887001 Up
32-8006001 On
32R8029001 On
34-7250001 thru 7450220
40S5
40S5
Tridair
PA30-C2
PA30-C2P
None
Collared Slotted
Phillips
PA34-200T Seneca II 75-78
34-7570001-7870474
27S3
PA34-200T Seneca II 79-81
PA34-220T Seneca III 81-87
PA34 Turtleback Panels
PA34 Turtleback Panels
34-7970001 thu 8170085
34-8133001 thru 8633020 On
Turtleback Option (Both wings)
40S5
PA36 Pawnee, Brave 73-83
PA38-112 Tomahawk 78-82
PA42 Cheyenne - See PA31
PA44-180,T Seminole 79-82
36-7360001 thru 8302025
38-78A0001 thru 82A0122
PA46 Malibu 84-On
46-8408001 On
PA60-600/601/602 Aerostar
69-83
PA60-700P Aerostar
60-0001 On
Mitsubishi
Serial#
MU2 B thru P 67-78
MU2 Solitaire 79-85
MU2 Marquise 79-85
All
All
All
Mooney
Serial#
Mark20A,B Super21 55-64
All
Original
Latches
Latches
25-0001 On
M252 TSE M20K 85 On
25-1000 On
Engine Cowling 2700S
Engine Cowling 27S3S
Nose Panel 2700S
Nose Panel 27S3S
None
None
None
PA34-C2
PA34-C2P
PA34-C3
PA34-C3P
PS34-OPTIONS
PA34-OPTIONS-1P
PA44-C1
PA44-C1P
PA46-C1
PA46-C1P
PA600-C1
PA600-C1P
PA700-C1
PA700-C1P
Fastener
Cowling
Kit
MU2-C1
MU2-C1P
MU2-C2
MU2-C2P
Original
M231 M20K-L/M 79-85
PA30-2701
PA30-2701P
PA30-2702
PA30-2702P
None
Trim
Kit
Fuel Tank
Kit
PA-T Comanche
None
PA-Navajo
None
None
PA-Cherokee Six
PA32-FT4
Original
24-1459 On
Kit
Description
PA32-FT1
PA32-FT2
PA32-FT3
60-8423001 On
M201 M20J-L/M 77-87
Conversion
Kit
PA-Cheyenne
44-7995001 thru 8207020
M20C 1965
All
M20E 1965
All
M20C
All
M20E,F,G 66-78
All
M20C Ranger, M20E Chaparral, M20F Super21/Executive, M20G Statesman
M201 M20J 77-84
24-0001-1458
Kit
Description
Fastener
Cowling
Kit
None
Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Kit
Description
Collared Slotted
Phillips
Collared Slotted
Phillips
Kit
Description
PA-Seneca
See Turtleback Options
PA32-FT5
PA34-FT1
PA34-FT1
PA34-FT2
None
PA-Pawnee
PA-Tomahawk
None
None
None
PA-Seminole
None
None
PA-Malibu
None
None
PA-Aerostar
None
Trim
Kit
Fuel Tank
Kit
MU2
MU2-FT1
Trim
Kit
Fuel Tank
Kit
Conversion
Kit
Kit
Description
None
Battery Access
Kit
Net/Net
M20-BAT1P
$83.30
M-20B
None
M20-C2
M20-C2P
M20-C3
M20-C3P
Collared Slotted
Phillips
Collared Slotted
Phillips
M20-BAT1
M20-BAT1P
M20-BAT1
M20-BAT1P
$62.83
$83.30
$62.83
$83.30
M-20C/D
M-20E/G
M-20C/D
M-20E/G
None
None
None
None
M20-C5
M20-C5P
M20-C6
M20-C6P
M20-C6A
M20-C6AP
M20-C7
M20-C7P
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
M20-BAT1
M20-BAT1P
M20-BAT2
M20-BAT2P
M20-BAT1
M20-BAT1P
M20-BAT2
M20-BAT2P
$62.83
$83.30
$86.04
$86.04
$62.83
$83.30
$86.04
$86.04
M-201/231
None
M-252
None
Copyright 2013
Oct 22, 2013
AERO
COMMANDER
Original
Serial#
500,520,560,720
680, 680E Round Cowl
500A,B,U,560F,680
560FP,FL,FLP Flat Cowl
685
All
500S
All
690,695
All
OTHER
AIRCRAFT
Bel-Citabria
Bel-Scout
Bel-Viking
Ercoupe
G-AA1/AA1B
G-Ag Cat
G-Tiger
Lake Amp
Fastener
AC500-C1
AC500-C1P
AC500-C2
AC500-C2P
AC500-C2A
AC500-C2AP
AC500-C3
AC500-C3P
AC500-C4
AC500-C4P
All
All
Original
Serial#
Cowling
Kit
Fastener
Cowling
Kit
Kit
Description
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Collared Slotted
Phillips
Kit
Description
Conversion
Kit
Kit
Description
None
Conversion
Kit
None
Copyright 2013
Kit
Description
Trim
Kit
Fuel Tank
Kit
R-Commander 500
None
Trim
Kit
Fuel Tank
Kit
Bel-Citabria
Bel-Scout
Bel-Viking
Ercoupe
G-AA1/AA1B
G-Ag Cat
G-Tiger
Lake Amp
None
None
None
None
None
None
None
None
Oct 22, 2013
Cessna
Cowling Fastener Conversion Kits
Stainless SK203 Kit List
9000 Airport Blvd Leesburg, Florida 34788
(352) 326-0001 352-326-0015 (Fax)
Screw Kits - SK25S4S Series
STCd FAA-PMA Approved
SK203 Kits - Gen IV Platemounts - Diamond™ Head Studs
May 8, 2015
Conversion Kit Pricing Internal.xls
Model
Year
Serial Number
Kit Part Number
Description
C150
59-66
17001-64532
C150C2800P
Screw Cowling - to SK25S4S Phillips
C150G-M
67-On
64533-79405
SK203C150P-SD2
SK28S3 Phillips - Side Kit
A150K-M
70-77
A150001-A150685
SK203C150P4
SK40S5S Phillips - Complete Kit
SK-C150DL
SK-C150DR
$69.65
$69.65
SK203C150P4D
SK40S5S Phillips - Complete Kit/Doubler
SK203C150P-FW4
SK40S5S Phillips - Firewall Kit
SK203C150P-RET
SK40S5S Phillips - Retro Kit
C172
56-66
28000-54892
C172C2800P
C172H-P
67-81
54893-75034
SK203C172P4
SK203C172P-FW4
Standard Cowl - All Southco
SK203C172P-SD4
SK40S5S Phillips - Side Kit
SK203C172P-RET
C172P
80-83
75035-76079
SK203C172PQ4
C172Q
83
75869-76079
SK203C172P-FW4
C172P-Q
84-85
76080-76516
83-83 Southco FW, Camloc 40S5 across nose
84-85 Camloc 27S3 FW, 40S5 across nose
SK203C172PQSD4
SK203C172P-RET
C172XP-XPII
SK203C172P-XP4
77-81
R1722000-3454
Southco - Firewall Camloc 40S5 sides, nose, and center split . Will not fit T41
FR17200226-00675*
*FR17200001-00440 only 11 mounts
SK203C172P-FR4
SK40S5S Firewall Conv - SK27S3S Side/Nose/Ctr
SK203C172PXPFW4
SK203C172PXPSD4
SK203C172PXP-RET SK40S5S Phillips - Retro Kit
C172R & S
97-On
80001-On
SK203C172P-RS4
8001-On
Note: Kit replaces J7444 mounts, all CLoc studs/grommets on firewall, sides, nose, service door, filter
Camloc 4002 - firewall/sides
SK203C172P-RS4FW SK40S5S Phillips - Firewall Kit
C175
58-62
55001-57119
C175C2800P
C177A-B
68-78
00001-02752
SK203C177P4
C177RG
71-78
00001-1366
SK203C177P-FW4
SK203C177P-SD4
SK203C177P-RET
C180
53-60
30000-50911
C180C2800P
C182
56-60
33000-53007
C182C2800P
C182P-RB
73-86
61426-68542
SK203C182P2
SK28S3/40S5S Phillips - Complete Kit
SK203C182P4
SK203C182P-FW4
SK203C182P-RET
Note: RET Kits are for customers who have previously installed SK245 Kits and want to convert back to the SK2003 rubber mounts.
RET Kits include new SK2003 Mounts, SK2001AW Alignment Washers and all Hardware (No Studs or Grommets)
Cessna Firewall Bracket Part#s Upper 0453003-3
Lower 0453003-2
Copyright 2016
Page 69
May 7, 2015
Beech Bonanza 33, 35, 36 and Debonair 33
Cowling Replacement and Conversion Kits
STC'd
FAA-PMA Approved for TC A777 and 3A15
April 17, 2015 Rev 2
2015 Kits include fasteners designed specifically for the Bonanza, easier installation - less labor hours
Upper Cowl Latch Config
(Later Models)
Upper Cowl Dzus Config
(Early Models)
Lower (Gill) Cowl - Airloc
(All Models)
Upper Cowl
Dzus AJ5 Configuration
Kit
Req
Type
Tool#
Model
Year
Serial Numbers
Kit
Fastener
Debonair (33)
60-67
CD1-CD1234
B35UC530
Stainless ZLoc
Replacement
1
C33A,E33A
66-69
CE1-CE289
B35UC40P
Stainles SK40S5S Phillips CLoc
Conversion
2,6
Bonanza (35)
47-69
D1 - D9068
B35UC40S
Stainless SK4002S Collared Slot CLoc
Conversion
2,6
Upper Cowl
Latch Configuration All serial numbers not listed above (No Fasteners/No Kit)
Lower Cowl
Airloc #2 Configuration
Model
Year
Serial Numbers
Debonair (33)
60-61
Bonanza (35)
47-61
Lower Cowl
Kit
Req
Type
Tool#
Stainless #2 ALoc
Replacement
3
Stainless SK28S3S Phillips CLoc
Conversion
4
Conversion
4
Kit
Fastener
CD1-CD350
B35LC2090
D1 - D6567
B35LC28P
B35LC27S
Airloc #5-080 Configuration
Model
Year
Bonanza N35-V35A
33
Kit
Req
Type
Tool#
Serial Numbers
Kit
Fastener
61-69
D6568-D9068
B35LC5080
Stainless #5 ALoc
Replacement
5
61-67
CD351-CD1234
B35LC40P
Conversion
2,6
F33
70
CD1235-CD1254
B35LC40S
Conversion
2,6
G33
72-73
CD1255-CD1304
66-Mid 73
CE1-CE435
70
CJ26-CJ39
-080
.267
B35LC5080
68-73
E1-E424
-100
.287
B35LC5100
* C33A,E33A,F33A
* Early F33C
36
Lower Cowl
Airloc #5-100 Configuration
Model
Year
Serial Numbers
* Later F33A
* Later F33C
Mid 73-94
70
V35B
36TC
36
Installation Tool#
33 and F33 Note: Check for proper stud length.
A Dimension
A
Kit
Req
Type
Tool#
Kit
Fastener
CE418,CE436-On
B35LC5100
Stainless #5 ALoc
Replacement
5
CJ40-On
B35LC40P
Conversion
2,6
70-82
D9069-On
B35LC40S
Conversion
2,6
79-87
EA1-On
73-On
E425-On
Tool Part#
Description
1
SK-A5C and SK-41405-3
#5 ZLoc Grommet Tool Including Clamp
2
4P3-T26
Installation Pliers and Grommet retainer tool
3
29693/29695
#2 ALoc Grommet Tool - Required only if grommets need replacement
4
SK-T26
To install SK2600-LWS Retainers
5
9529/29667
#5 ALoc Grommet Tool - Required only if grommets need replacement
9000 Airport Blvd Leesburg, FL 34788 1-800-223-1963 352-326-0012 (Fax) www.skybolt.com
Copyright 2016
Page 70
April 17, 2015
Vans RV Fastener Kits
2016 Kits Include Diamondhead® Fasteners,
High Shear Anti-Float Grommets, SK-RVFS1
Interlocking Flanges, SK-RVC1 Cleko Adapters,
Rivet Kit.
9000 Airport Blvd Leesburg, Florida 34788
352-326-0001 352-326-0015 (Fax)
RV4J-C1S
RV4J-C1P
RV4J-C1S-U
RV4J-C1P-U
RV4J-C1S-F
RV4J-C1P-F
RV4J-C1S-UF
RV4J-C1P-UF
RV4J-C1S-S
RV4J-C1P-S
RV4J-C1S-C
RV4J-C1P-C
RV8J-C1S
RV8J-C1P
RV8J-C1S-U
RV8J-C1P-U
RV8J-C1S-F
RV8J-C1P-F
RV8J-C1S-UF
RV8J-C1P-UF
RV8J-C1S-S
RV8J-C1P-S
RV679J-C1S
RV679J-C1P
RV679J-C1S-U
RV679J-C1P-U
RV679J-C1S-F
RV679J-C1P-F
RV679J-C1S-UF
RV679J-C1P-UF
RV679J-C1S-S
RV679J-C1P-S
RV1014J-C1S
RV1014J-C1P
RV1014J-C1S-U
RV1014J-C1P-U
RV1014J-C1S-F
RV1014J-C1P-F
RV1014J-C1S-UF
RV1014J-C1P-UF
RV1014J-C1S-S
RV1014J-C1P-S
RV-OD1
RV-OD2
SKYBEAM-40
SK-RVFS1
SK-RVCI
Description
Vans RV4 - Complete Kit
Vans RV4 - Upper (FW/Side) Kit
Vans RV4 - Complete Firewall Kit
Vans RV4 - Upper Firewall Kit
Vans RV4 - Side Kit
Vans RV4 - Side Kit
Vans RV4 - Cheek Cowl Kit
Vans RV4 - Cheek Cowl Kit
Vans RV8 - Side Kit
Vans RV8 - Side Kit
Vans RV6,7,9 - Complete Kit
Vans RV6,7,9 - Complete Kit
Vans RV6,7,9 - Upper (FW/Side) Kit
Vans RV6,7,9 - Upper (FW/Side) Kit
Vans RV6,7,9 - Complete Firewall Kit
Vans RV6,7,9 - Complete Firewall Kit
Vans RV6,7,9 - Upper Firewall Kit
Vans RV6,7,9 - Upper Firewall Kit
Vans RV6,7,9 - Side Kit
Vans RV6,7,9 - Side Kit
Vans RV10,14 - Complete Kit
Vans RV10,14 - Complete Kit
Vans RV10,14 - Upper (FW/Side) Kit
Vans RV10,14 - Upper (FW/Side) Kit
Vans RV10,14 - Complete Firewall Kit
Vans RV10,14 - Complete Firewall Kit
Vans RV10,14 - Upper Firewall Kit
Vans RV10,14 - Upper Firewall Kit
Vans RV10,14 - Side Kit
Vans RV10,14 - Side Kit
38 Collared Slotted Fasteners
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Phillips
Oil Door Winged Fasteners (Skytanium)
Oil Door SK28S3 Flush Fasteners (Stainless)
Composite Reinforcement Strip 3"x40"
Inter-connecting Flange (Patent Pending)
Cleko insert
2 ea ZG2600-1W, SK213-2, Drill Template
2 ea SK28S3-2S, SK213-2, Drill Template
Per Strip
1ea Flange
1ea Insert
Copyright 2016
Page 71
Weight/Lbs
1.919
1.515
0.909
0.505
1.010
0.404
2.525
1.717
1.515
0.707
1.010
2.626
1.818
1.616
0.808
1.010
3.131
2.273
1.818
0.960
1.313
December 10, 2015

PDF catalog

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

Summer 2015 - LE Phillips Memorial Public Library

Parking Options for the Dr. Phillips Center

Gravlax Kit Guide and Information

LGOBO SALE SHEET

The wardrobe malfunction — it`s a Hollywood moment that

Sanitation Through Separation - Cisco

DMC1229 WIRING SYSTEM SERVICE KIT For the Kaman K-Max

Hanging file system kits. File Frame.

Drawing - Varley and Gulliver Ltd