Protegra CS RO Series

Protegra CS™ RO Series
Meeting All Your Pure Water Demands
Water Technologies
s
Pressure gauge
Pressure
switch
Solenoid
valve
RO-Module
Check
valve
Pump
Flow meter
Pre-Filter
Pressure
control
Solenoid
valve
Check
valve
Conductivity
measurement
Service valve
Restrictor
Protegra CS™ RO Series flowsheet
A Convincing Performance
Multi-purpose purity – reverse osmosis equipment
Laboratory, medical and industrial
applications all need pure water in
various qualities and quantities. The
Protegra CS™ RO Series produces
pure water for a wide variety of
applications by reversing the natural
osmosis process to deionize water
in an environmentally friendly
manner. Pure water produced via
reverse osmosis can be put to a
number of uses in laboratories – for
rinsing laboratory glassware or as
feed water to autoclaves, climatized
cabinets and ultrapure water
systems. The Protegra CS™ RO Series
focuses on economic efficiency,
combining a compact design with
high quality components and
intelligent controls. The quality of
Protegra CS™ RO Series
Protegra CS™ RO Series
The Protegra CS™ RO Series series is
designed to produce large amounts
of purified water with conductivity
values depending on the salt content
of the feed water (for example 1000
μS/cm tap water quality: < 20 μS/
cm product water). The deionizaton
rate is at least 98%. Additional
equipment, such as different tank
sizes and pressure pumps, can be
added to the plant according to
customers’ individual needs. The
system can, for instance, be set up
as a central water treatment plant
Typical applications:
nFeed for ultrapure water systems
nGeneral
chemistry
n
Laboratory
washing machines
n
Water
for autoclaves and
environmental chambers
nBuffer
preparation
130
200
350
500
750
1000
1250
Permeate output at 15°C
l/h
130
200
350
500
750
1000
1250
Salt rejection rate
%
98
98
98
98
98
98
98
Recovery rate max.
%
75
75
75
75
75
75
75
bar
14
14
14
14
14
14
14
Power consumption
kW/h
0.55
0.55
0.55
0.55
1.6
1.6
1.6
Dimensions H x W x D
mm
Operating pressure max.
Catalog Number
2
with in a building and supplemented
with accessories to form a closed
circuit pipeline. All systems are
equipped with an RS 232 interface.
We would be happy to recommend
the right system for you!
the pure water produced depends
on the quality of the inlet water
entering the system.
1650 x 600 x 600
3010
3011
3013
3014
1650 x 600 x 750
3015
3016
3017
Pressure
switch
Solenoid
valve
Pressure gauge
Ball valve
RO-Module
Storage tank
Check
valve
Conductivity
measurement
Pump
Ball valve
Sample
valve
Flow
meter
Pre-Filter
Membrane
pressure
tank
Pressure
control
Check
valve
Solenoid
valve
Service valve
Deionizer
Pump
Conductivity
measurement
Pressure
switch
Restrictor
Protegra CS™ DI Series flowsheet
Protegra CS™ DI Series
The Protegra CS™ DI Series
incorporates RO membranes and
mixed-bed cartridges to produce
pure water with conductivity values
under 0.1μS/cm.
The reverse osmosis membrane is
the initial deionization component,
leaving the mixed-bed ion exchanger
to deal with post-deionizaton. This
reduces the cartridge exchange
frequency and, in turn, the operating
costs. We have integrated a
completely dischargeable storage
tank and a pressure booster pump.
This system can also be operated as
a central water treatment facility in,
for instance, a laboratory wing with
a closed circuit pipeline.
Additional integration options
include UV oxidization and
disinfection, CO2 traps for the tank,
sterile filtration and ultrafiltration.
All units are supplied ready for
immediate use, with all equipment
installed into a cabinet and fitted
with an RS 232 interface.
Typical applications:
n
Feed for ultrapurewater
systems
General chemistry
n
Laboratory washing machines
including final rinse
n
Water for autoclaves and
environmental chambers
n
Buffer preparation
n
Photometry
n
Spectrophotometry
n
Media preparation
n
Protegra CS™ DI Series
Permeate output at 15°C
130
200
l/h
130
200
Pure water quality
μS/cm
< 0.1
< 0.1
Recovery rate max.
%
75
75
bar
14
14
Operating pressure max.
Purewater pressure
bar
1.5 to 3
1.5 to 3
Power consumption
kW/h
0.55
0.55
Dimensions H x W x D
mm
1650 x 600 x 600
Catalog Number
3110
3111
3
cation exchange
membrane
raw water / dissolved salts 100%
SO4 2–
Ca 2+
salts
concentrate
anion exchange
membrane
H2O
+
Cl –
O2
H
+
cation
exchange
chamber
semipermeable
membrane
Mg
2+
–
HCO3 –
OH
–
H2
CO 3 2–
Na +
HSiO 3
H+
pure water /
permeate
dissolved salts
1–2%
anion
exchange
chamber
–
OH –
drain
concentrate
chamber
conductivity: 2 – 30 µS/cm
ultra pure water: 0.055 µS/cm
The Principle Behind
The El-Ion® Electro-Deionization Module
The El-Ion® electro-deionization module uses resin
chambers in a single bed configuration has shown to
deionize the water. Microbiological analysis has proven a
remarkable reduction in the number of bacteria with high
CFU counts in the feed water. The electrodes that contact
the resin create an electric potential in the water that is
unsuitable for bacteria to live in. The intermediate pH shift
in the cells creates a positive effect for the removal of SiO2
and CO2 and helps as well to reduce bacterial growth.
Another advantage of electro-deionization is
continuous operation. The resin is continually
regenerated without the use of any chemicals. The
energy consumption of this process is very low and
serves as an advantage for the environment – using no
chemicals and low power consumption.
Typical applications:
n
Feed for ultrapure water systems
General chemistry
n
Laboratory washing machines including final
rinse
n
Feed for autoclaves and environmental
chambers
n
Buffer preparation
n
Photometry
n
Spectrophotometry
n
General chemical analysis
n
Media preparation
n
When a mixed bed polishing module is used, the
conductivity of the product water increases during
normal operation. The resin has to be changed or
regenerated if the maximum acceptable conductivity is
reached. When using the El-Ion® electro-deionization
module, the water quality is constantly at the highest
level. No regeneration, no quality variation. Simply
high quality water at any time.
4
Protein electrophoreses
n
Microbiological media preparation
n
Cytology and histology work
n
Electrophoreses
n
Conductivity
system outlet [µS/ cm]
100,00
10,00
1,00
0,10
0,01
20
40
60
80
100
120
140
Time in days
Ix-resin
El-Ion ® module
Comparison Ix-Resin / El-Ion® electro-deionization module
The most convincing advantage of the Protegra CS™ RO/EDI Series is
the integrated deionization El-Ion® module.
A Highly Perfected Technology –
Reverse Osmosis Including El-Ion®
Electro-Deionization Module
Consistently high water quality without the use
of chemicals.
The combination of Protegra CS™ RO Series with the
El-Ion® electro-deionization module significantly
improves the quality of the pure water. The Protegra
CS™ RO/EDI Series are available with either a single stage
or a two-stage El-Ion® electrodeionization module. Our
systems are distinguished by their ability to produce
a consistent level of pure water quality, reaching
conductivity values less than 0.1 μS/cm in a single stage
plant and below 0.07 μS/cm in a two-stage plant.
Protegra CS™ RO/EDI Series, El-Ion® single-stage module
Pure water output at 15°C
l/h
Pure water quality
μS/cm
Typical pure water quality
μS/cm
Recovery rate max.
%
Operating pressure max.
bar
Power consumption
kW/h
Dimensions H x W x D
mm
Catalog Number
Protegra CS™ RO/EDI Series, El-Ion® twin-stage module
Pure water output at 15°C
l/h
Pure water quality
μS/cm
Typical pure water quality
μS/cm
Recovery rate max.
%
Operating pressure max.
bar
Power consumption
kW/h
Dimensions H x W x D
mm
Catalog Number
120
120
< 0.5
< 0.1
75
14
0.6
3051
120
120
< 0.1
< 0.07
75
14
0.6
3050
180
260
180
260
< 0.5
< 0.5
< 0.1
< 0.1
75
75
14
14
0.7
0.75
1650 x 600 x 600
3056
3061
180
260
180
260
< 0.1
< 0.1
< 0.07
< 0.07
75
75
14
14
0.7
0.75
1650 x 600 x 600
3055
3060
310
310
< 0.5
< 0.1
75
14
0.8
3066
310
310
< 0.1
< 0.07
75
14
0.8
3065
500
750
500
750
< 0.5
< 0.5
< 0.1
< 0.1
75
75
14
14
1.5
1.7
1650 x 600 x 750
3071
3076
500
750
500
750
< 0.1
< 0.1
< 0.07
< 0.07
75
75
14
14
1.5
1.7
1650 x 600 x 750
3070
3075
5
s
Solenoid
valve
Pressure
switch
Check
valve
Pressure gauge
Flushing port
RO-Module
Pump
El-Ion® cell
Flow meter
Pre-Filter
Conductivity
measurement
Restrictor
Pressure
control
Solenoid
valve
Check
valve
Solenoid valve
Service valve
Conductivity
measurement
Restrictor
The side panels are easy to remove from all Protegra
CS™ RO/EDI Series cabinets. This makes it very
easy to access the equipment inside (equipment
photographed without front and side panels).
Protegra CS™ RO/EDI Series
The TOC content is less than 30 ppb. The
special layout of the separate bed process and
the associated shift in pH value towards the
acidic reduces the bacterial count and prevents
bacterial growth in the cell. No other system
works more efficiently or more economically,
as the El-Ion® module only has a 10% loss rate.
This is a particularly inexpensive system in terms
of operating costs, and maintenance is minimal.
And the compact cabinet design means that our
system is at home in the smallest of spaces. All
plants are equipped with an RS 232 interface.
6
Fields of use :
Microbiology
Electronics
Optics
Semiconductor
Pharmaceuticals
Chemistry
Clinical
Power Plant
Glass Industry
Galvanic Industry
Stainless steel equipment meets
Customized RO/El-Ion® System
FDA standards – for use in the
combination supplying fuel cells.
pharmaceuticals industry with
integrated El-Ion® electrodeionization
module.
Protegra CS™ RO/EDI Series and ultrapure water system
incorporated into a single unit.
Specialty Applications That Meet
Industrial and FDA Standards
Many applications need specialized equipment –
for example the pharmaceuticals industry. We have
developed and built systems in which all parts that
come into contact with water are made of stainless
steel. These systems meet all FDA requirements.
The up-and-coming fuel cell technologies can
benefit from our equipment too. We can also
produce equipment that meets other industrial
standards.
All units are equipped with an RS 232 interface.
Siemens can plan and build systems in all sizes
and configurations and customize it to meet your
needs.
ROG equipment is available for production rates of up to 34.000 l/h.
Industrial scale 2-stage reverse osmosis equipment.
7
For more information contact:
Siemens
Water Technologies
Tel +49 40/6 70 868 6
Fax +49 40/6 70 868 44
[email protected]
El-Ion and Protegra CS are trademarks of
Siemens, its subsidiaries or affiliates in
some countries.
The information provided in this brochure
contains merely general descriptions or
characteristics of performance which in
actual case of use do not always apply
as described or which may change as
a result of further development of the
products. An obligation to provide the
respective characteristics shall only exist
if expressly agreed in the terms of the
contract.
©2010 Siemens Water Technologies Corp.
HPS-L-SGRO-BR-0710
Subject to change without prior notice.
www.siemens.com/water