Untitled - CSI Accessories

Transcription

CSI Performance & Truck Accessories is proud to offer quality
offroad, exterior, interior, performance, and towing parts and
accessories at an affordable price. We cover products ranging
from winches and recovery equipment for your offroad vehicle,
to chrome air cleaners, alternators, and distributors for your
hotrod or muscle car, to air intakes and towing accessories for
your truck and SUV that gets your toys where you’re going...
All CSI® products are warranted against defects in material or worksmanship for a period of one year
from the date or purchase by the original purchaser.
During the warranty period, CSI®, at its option, will repair or replace any product found to be defective
upon receipt of that product with the original purchase receipt via pre-paid freight to its facility.
CSI® shall not be liable for any consequential or contingent damages, expenses, or injuries arising
either directly or indirectly from any defects in these products or from the use of these products.
You may have other rights under state or federal law, including laws governing warranties.
For all warranty claims, please contact the place of purchase for proper processing.
Some items are not legally for use or sale on pollution controlled vehicles in CA. Check local state and federal laws.
2
www.csiaccessories.com
Air Cleaners
Alloy Cylinder Heads
Alternators
Battery Mount Billet Distributors
Billet Replacement Parts
Breathers
Brute Series Tie Downs
Brute Series Winches
Carburetors Accessories
Cool Air Intakes
Cooling Accessories
Detail Duster
Differential Covers
Distributor Hold Down Kits
Engine Accessories
Exhaust Tips
Fuel Systems
Fuel Tank Doors
Gaskets
Glasspack Mufflers
Grille Guards
Header Reducers
Headers
Heat Shields
HEI Distributors
HEI Replacement Parts
Hood Pin
Ignition Accessories
4 X 4 Jack
Low Profile Winches
Mufflers
Offroad Lights
Offroad Seats
Oil Pan Accessories
Pet Barrier
Pulleys
Shifter Boots
Side Bars
Starters
Timing Covers
Tire Deflators
Towing Accessories
Transmission Accessories Utility Winches
Valve Covers
Water Necks
Water Pumps
Winch Accessories
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
39
29
34
28
24
24
33
13
17
40
40
38
12
4-6
23
27-28
45
41-42
46
43
44
7-10
44
44
22
23
23
22
24
15
16
44
15
12
31
12
35-36
22
11
25
26
15
14
30
16
32
37
37
18-21
3
Chevy/GMC
Truck; 1/2 Ton 2WD/4WD Rear
(Will Not Fit 64-70 Trucks w/Leaf Springs)
64-87
Pattern
Steel
10 Bolt
1300
Aluminum
Truck; 1/2 & 3/4 Ton 4WD Dana 44 Front
66-80
10 Bolt
1307
1366
Truck; 1/2 & 3/4 Ton 2WD/4WD Rear w/8.75" Ring Gear
67-81
12 Bolt
1303
1369
1373
Truck; 3/4 & 1 Ton 2WD/4WD Dana 60 Rear
69-99
10 Bolt
Truck; 3/4 & 1 Ton 2WD/4WD Rear
73-95
14 Bolt
1320
1371
Truck; 3/4 & 1 Ton 2WD/4WD Rear w/9.5" Ring Gear
73-95
14 Bolt
1330
Truck; 1/2 & 3/4 Ton Front
77-90
10 Bolt
1310
Truck; w/9.5" Ring Gear Rear
81-UP
14 Bolt
1330
Truck; 1/2 Ton 2WD/4WD Rear
88-02
10 Bolt
1316
1379
1381
Truck; 3/4 & 1 Ton 2WD/4WD Dana 44 Rear
88-03
10 Bolt
1307
1366
Truck; 3500 Dana 80 Rear w/13" Ring Gear
95-UP
10 Bolt
1344
1387
Blazer; Full Size Dana 44 Front
66-80
10 Bolt
1307
1366
Blazer; Full Size 2WD/4WD w/8.75" Ring Gear Rear
67-81
12 Bolt
1303
1369
Blazer; Full Size 2WD/4WD w/8.5" Ring Gear Rear
88-92
10 Bolt
1316
1381
Dulley; 2WD/4WD Rear
75-00
14 Bolt
1320
1373
Jimmy; Full Size 2WD/4WD w/8.75" Ring Gear Rear
67-81
12 Bolt
1303
1369
Jimmy; Full Size 2WD/4WD w/8.5" Ring Gear Rear
88-92
10 Bolt
1316
1381
S-10; 2WD/4WD Rear
82-03
10 Bolt
1366
S-15; 2WD/4WD Rear
82-03
10 Bolt
1366
Safari Van; 2WD/4WD Rear
85-98
10 Bolt
Sierra; 1500 1/2 Ton 2WD/4WD w/8.5" Ring Gear Rear
1999
10 Bolt
1316
Sierra; 2500 3/4 Ton 2WD/4WD w/9.5" Ring Gear Rear
1999
14 Bolt
1330
Silverado; 1500 1/2 Ton 2WD/4WD w/8.5" Ring Gear Rear
1999
10 Bolt
1316
81-UP
14 Bolt
1330
66-80
10 Bolt
1307
1366
77-91
10 Bolt
1310
1379
Suburban; 1500 1/2 Ton 2WD/4WD Rear w/8.5" Ring Gear
88-99
10 Bolt
1316
1381
Suburban; 2500 3/4 Ton 2WD/4WD Rear
88-99
14 Bolt
1320
1373
Tahoe; 2WD/4WD w/8.5" Ring Gear Rear
94-99
10 Bolt
1316
1381
Yukon; 2WD/4WD w/8.5" Ring Gear Rear
94-99
10 Bolt
1316
1381
Pattern
Steel
Aluminum
Aerostar; Van w/7.5" Ring Gear Rear
84-98
10 Bolt
1332
Aerostar; Van 4.0L V6 8.8" Ring Gear Rear
90-97
10 Bolt
1312
Bronco; 2WD/4WD Dana 60 Rear
57-95
10 Bolt
1308
1376
Bronco; Dana 44 Front
59-95
10 Bolt
1307
1366
Bronco; Dana 30 Front
66-71
10 Bolt
1328
1360
Bronco; 2WD/4WD w/8.8" Ring Gear Rear
83-03
10 Bolt
1312
Bronco II w/7.5" Ring Gear Rear
82-92
10 Bolt
1332
E-150; Full Size Van w/8.8" Ring Gear Rear
83-98
10 Bolt
1312
E-250; Van Dana 60 Rear
75-85
10 Bolt
E-250; Full Size Van w/8.8" Ring Gear Rear
83-98
10 Bolt
1312
1314
85-03
12 Bolt
75-85
10 Bolt
E-350; Full Size Van w/Heavy Duty Sterling Rear
85-03
12 Bolt
Polished aluminum
differential covers
Adds additional oil capacity and are
finned to help dissipate heat more rapidly.
Polished to a brilliant finish.
1384
1371
1314
86-03
12 Bolt
1314
1384
99-UP
10 Bolt
1308
1376
1384
Expedition; 2WD/4WD w/Heavy Duty Sterling Rear
86-03
12 Bolt
1314
Explorer; 2WD/4WD w/8.8" Ring Gear Rear
91-03
10 Bolt
1312
1371
1384
Excursion; 2WD/4WD w/Heavy Duty Sterling Rear
F-100; 2WD/4WD Dana 60 Rear
57-95
10 Bolt
1308
1376
F-100; Dana 44 Front
66-79
10 Bolt
1307
1366
57-95
10 Bolt
1308
1376
1312
1371
Excursion; 4WD Dana 60 Front
4
1310
1381
Suburban; Dana 44 Front
E-250; Full Size Van w/Heavy Duty Sterling Rear
Chromed steel has a sleek modern finish
that will not tarnish over time. Covers
feature a smooth exterior.
1381
Suburban; 4WD Front
E-350; Van Dana 60 Rear
Chromed Steel
differential covers
1366
Silverado; 2500 3/4 Ton 2WD/4WD w/9.5" Ring Gear Rear
Ford
Differential covers are a great way to dress
up trucks, SUVs, and Vans while adding
protection against the dangers of road
debris and the hazards of towing. Designed
to replace the manufacturer’s cover. They
feature thick walled construction to add
strength to the differential housing, thus
protecting the rear-end gear oil from
high-heat viscosity breakdown.
1379
Ford (continued)
Pattern
Steel
Aluminum
66-79
10 Bolt
1307
1366
F-150; 2WD/4WD w/8.8" Ring Gear Rear
83-03
10 Bolt
1312
F-150; 2WD/4WD w/Heavy Duty Sterling Rear
86-03
F-150; 2WD/4WD 9.75" Ring Gear Rear
1308
57-95
10 Bolt
1308
66-79
10 Bolt
1307
1366
86-03
12 Bolt
1314
1384
99-UP
1376
57-95
10 Bolt
1308
66-79
10 Bolt
1307
1366
12 Bolt
1314
1384
95-UP
10 Bolt
1344
1387
1376
99-UP
10 Bolt
1308
95-UP
10 Bolt
1344
1387
95-UP
10 Bolt
1344
1387
Mountaineer; 2WD/4WD w/8.8" Ring Gear Rear
91-03
10 Bolt
1312
Ranger; Pickup w/7.5" Ring Gear Rear
82-03
10 Bolt
1332
Pattern
Steel
94-99
12 Bolt
1319
Dakota; 4WD Dana 25-27-30 Front
99-03
10 Bolt
1328
1360
Dually Pickup; 2WD/4WD Dana 60 Rear
90-99
10 Bolt
1308
1376
Durango; V8 2WD/4WD w/9.25" Ring Gear Rear
94-99
12 Bolt
1319
Durango; 4WD Dana 25-27-30 Front
99-03
10 Bolt
1328
Ram; Pickup 4WD Dana 44 Front
72-03
10 Bolt
1307
1366
Ram; Pickup Dana 60 Rear
72-03
10 Bolt
1308
1376
Ram; W100 Pickup w/9.25" Ring Gear Rear
74-93
12 Bolt
1319
1376
1384
1373
Aluminum
1360
Ram; 150 Pickup w/9.25" Ring Gear Rear
74-93
12 Bolt
1319
Ram; 200 Pickup w/9.25" Ring Gear Rear
74-93
12 Bolt
1319
Ram; 1500 Pickup 2WD/4WD w/9.25" Ring Gear Rear
90-99
12 Bolt
1319
Ram; 2500 Pickup 2WD/4WD Dana 60 Rear
90-99
10 Bolt
1308
1376
Ram; 3500 Pickup 2WD/4WD Dana 60 Rear
90-99
10 Bolt
1308
1376
Ram; 3500 Pickup Dana 80 Rear
95-UP
10 Bolt
1344
1387
Ram Van; w/9.25" Ring Gear Rear
74-02
12 Bolt
1319
Ram Van; 1500 1/2 Ton w/9.25" Ring Gear Rear
80-99
12 Bolt
1319
Ram Van; 2500 3/4 Ton Dana 60 Rear
72-99
10 Bolt
1308
1376
aluminum
INTERNATIONAL
1387
1376
Dakota; V8 2WD/4WD w/9.25" Ring Gear Rear
1328
1308
1334
Dodge
1360
10 Bolt
12 Bolt
1376
1342
1384
1314
1314
1334
F-250; 2WD/4WD 9.75" Ring Gear Rear
1336
12 Bolt
12 Bolt
pattern
steel
IH Scout; Dana 44 Rear
41-80
10 Bolt
1307
1366
IH Scout; Dana 30 Rear
60-67
10 Bolt
1328
1360
IH Scout; Dana 25-27-30 Front
60-74
10 Bolt
1328
1360
IH Scout; Dana 44 Front
67-80
10 Bolt
1307
1366
Pattern
Steel
Aluminum
74-86
10 Bolt
1307
1366
Cherokee; w/Spicer 20 Corp Rear
81-84
12 Bolt
1324
Cherokee; Dana 30 Thick Front
86-97
10 Bolt
1340
Cherokee; 4.0L 6 w/9.25" Ring Gear Rear
92-99
12 Bolt
1319
Grand Cherokee; 4.0L 6 w/9.25" Ring Gear Rear
94-99
12 Bolt
1319
CJ Series; Dana 30 Front
41-03
10 Bolt
1328
jeep
Cherokee; Dana 44 Front
1360
5
jeep (continued)
Pattern
Steel
Aluminum
CJ Series; Dana 44 Rear
41-80
10 Bolt
1307
1366
CJ Series; w/Spicer 20 Corp Rear
76-85
12 Bolt
1324
Comanche; Dana 30 Thick Front
86-97
10 Bolt
1340
J Series; Dana 44 Rear
41-80
10 Bolt
1307
J Series Trucks; Dana 44 Front
74-86
10 Bolt
1307
1366
J Series Trucks; Dana 44 Rear
74-80
10 Bolt
1307
1366
J Series Trucks; Corp Rear
81-84
12 Bolt
1324
Wagoneer; Dana 44 Front
74-86
10 Bolt
1307
Wagoneer; w/Spicer 20 Corp Rear
81-84
12 Bolt
1324
Wagoneer; Dana 30 Thick Front
86-97
10 Bolt
1340
Wrangler; 4.0l 6 w/9.25" Ring Gear Rear
92-99
12 Bolt
1319
1340
XJ Midsize; Dana 30 Thick Front
86-97
10 Bolt
XJ Midsize; Dana 35 Rear
86-90
10 Bolt
1342
YJ Wrangler; Dana 30 Thick Front
86-97
10 Bolt
1340
YJ Wrangler; Series Dana 35 Rear
86-90
10 Bolt
1342
Pattern
Steel
10 Bolt
1332
mazda
2300 Rear
94-03
3000 Rear
94-03
10 Bolt
1332
4000 Rear
94-03
10 Bolt
1312
1300
1366
1366
1384- Intalled
Close-up
Aluminum
1334
1319
1320
1316
1332
1366
1340
Differential STEEL Cover Bolts
Differential steel cover bolts are designed to securely fasten
the differential cover to the rear-end housing. Hex head style
provides an easy grip head. All bolts come zinc plated for
rugged durability. Available in packs of 10, 12, and 14.
10 Bolt Pack
C9750
12 Bolt Pack
C9752
14 Bolt Pack
C9754
6
C9750
1381
Stainless Steel ONE PIECE
Grille Guards
Stainless Steel Grille Guards provide customized front end style
for the headlight and grille areas of trucks and sport utility
vehicles. Each features an application specific design so that every
installation fits the contours of the vehicle perfectly. Stainless Steel
comes polished to a glossy finish to issue years of good looks.
Cadillac
Black
99-00
2/4
150030
Escalade
02-06
2/4
150100
150107
Escalade
07-10
2/4
150320
150327
Escalade ESV
02-06
AWD
150100
150107
Escalade ESV
07-10
2/4
150310
150317
Escalade EXT
02-06
AWD
150100
150107
Escalade EXT
07-10
2/4
150310
150317
Black
Stainless
Avalanche 1500
02-06
2/4
150140
150147
Avalanche 1500
07-10
2/4
150290
150297
Avalanche 1500
03-06
2/4
150210
150217
Avalanche 2500
07-10
2/4
150350
150357
Avalanche 2500
03-06
2/4
150220
150227
Blazer
96-97
4
150090
Blazer
98-04
4
150040
Colorado
04-10
2/4
150260
K5 Blazer
92-99
2/4
150010
S-10 Pick-Up
96-97
4
150090
S-10 Pick-Up
98-03
4
150040
Silverado 1500
99-02
2/4
150020
150027
Silverado 1500 &
Z71 ‘07 Classic
03-07
2/4
150210
150217
Silverado 1500
07-10
2/4
150320
150327
Silverado 1500 HD
01-02
2/4
150160
Silverado 1500 HD
‘07 Classic
03-07
2/4
150220
Silverado 1500 HD
07-08
2/4
150330
Silverado 2500
99-02
2/4
150050
150057
Silverado 2500
03-06
2/4
150220
150227
Silverado 2500 HD & 3500
01-02
2/4
150150
Silverado 2500 HD &
3500 ‘07 Classic
03-07
2/4
150230
150237
Silverado 2500 HD
& 3500
07-10
2/4
150340
150347
Silverado C/K Pickup
88-99
2/4
150010
Suburban
92-99
2/4
150010
Suburban 1500
00-06
2/4
150020
150027
Suburban 1500
07-10
2/4
150290
150297
Suburban 2500
00-06
2/4
150050
150057
Suburban 2500
07-10
2/4
150350
150357
Tahoe
92-99
2/4
150010
Tahoe 1500
00-06
2/4
150020
150027
Tahoe 1500
07-10
2/4
150290
150297
Tahoe 2500
00-06
2/4
150050
150057
Tahoe 2500
07-10
2/4
150350
150357
Trailblazer & EXT
02-08
2/4
150120
150127
Black
Stainless
97-04
2/4
252010
Chevrolet
(No Cladding)
(No Cladding)
Chevy
Avalanche
Black Powder Coated ONE PIECE
Grille Guards
These European styled grille guards feature a high quality onepiece construction with 1/4" side plates and 1-1/2" tubing. A low
gloss black powdercoat finish gives the grille guards a resistance
to rust and chipping. Headlight guards are removable for easy
access to the headlights. Custom made for each application to
ensure a perfect fit.
Dodge
Dakota
Chevy Silverado
Stainless
Escalade
Dakota
05-11
2/4
252120
Durango
98-03
2/4
252010
150267
150227
252127
7
Dodge (Continued)
252167
Black
Stainless
Durango
04-06
2/4
252110
252117
Durango
07-10
2/4
252210
252217
Nitro
07-08
2/4
252190
252197
Ram 1500
94-01
2/4
252020
252027
Ram 1500
02-05
2/4
252080
252087
Ram 1500
06-08
2/4
252140
252147
Ram 1500
09-11
2/4
252250
252257
Ram 2500
94-02
2/4
252020
252027
Ram 2500
03-05
2/4
252090
252097
Ram 2500
06-09
2/4
252150
252157
Ram 2500
10-11
2/4
252260
252267
Ram 3500
94-02
2/4
252020
252027
Ram 3500
03-05
2/4
252090
252097
Ram 3500
06-09
2/4
252150
252157
Ram 3500
10-11
2/4
252260
252267
Ram Sport
99-01
2/4
252030
01-04
2/4
351130
Ford
Escape
Ford
Explorer
252010
Nissan Xterra
8
Black
Stainless
Escape
05-07
2/4
351260
351267
Escape
08-11
2/4
351330
351337
Excursion
00-04
2/4
351010
351017
Excursion
05-07
2/4
351250
351257
Expedition
99-02
4
351020
351027
Expedition
99-02
2
351030
351037
Expedition
97-98
4
351060
Expedition
97-98
2
351150
Expedition
03-06
2/4
351200
351207
Expedition
07-11
2/4
351310
351317
Explorer
95-98
2/4
351100
Explorer
02-05
2/4
351140
351147
Explorer
06-10
2/4
351270
351277
Explorer (Exc. 01 sport)
99-01
2/4
351040
Explorer Sport
01-05
2/4
351110
Explorer Sport Trac
01-06
2/4
351110
Explorer Sport Trac
07-10
2/4
351270
351277
F-150 Pickup
99-03
4
351020
351027
F-150 Pickup
99-03
2
351030
351037
351060
F-150 Pickup
97-98
4
F-150 Pickup (Exc. Heritage)
04-05
2/4
F-150 Pickup
06-08
2/4
351290
351297
F-150 Pickup
09-11
2/4
351360
351367
F-250 Pickup
99-03
4
351020
351027
F-250 Pickup
99-03
2
351030
351037
F-250 LD Pickup
97-98
4
351060
F-250 Super Duty
99-04
2/4
351010
351017
F-250 Super Duty
05-07
2/4
351250
351257
F-250 Super Duty
08-10
2/4
351320
351327
F-250 Super Duty
2011
2/4
351370
351377
F-350 Super Duty
99-04
2/4
351010
351017
F-350 Super Duty
05-07
2/4
351250
351257
F-350 Super Duty
08-10
2/4
351320
351327
F-350 Super Duty
2011
2/4
351370
351377
Ranger Edge
01-10
2/4
351120
351297
Ford (Continued)
Black
Stainless
Ranger Edge XLT
01-10
2/4
351120
Ranger Pickup
98-00
2/4
351050
Black
Stainless
Acadia
07-10
2/4
150380
150387
Canyon
04-10
2/4
150260
150267
Envoy/Envoy XL
02-09
2/4
150130
150137
Jimmy
98-04
2/4
150080
GMC
Sierra 1500
07-10
2/4
150360
150367
Sierra 1500
99-02
2/4
150060
150067
Sierra 1500 ‘07 Classic
03-07
2/4
150240
150247
Sierra 1500 HD
01-02
2/4
150070
Sierra 2500
99-02
2/4
150070
Sierra 2500 HD & 3500
01-02
2/4
150170
Sierra 2500 HD & 3500 ‘07
Classic
03-07
2/4
150250
150257
150377
351327
Sierra 2500 HD & 3500
07-10
2/4
150370
Sierra Denali
02-06
2/4
150180
Sierra C/K Pickup
88-98
2/4
150010
Sonoma
96-97
4
150090
Yukon
92-99
2/4
150010
Yukon/Yukon XL 1500
00-06
2/4
150060
150067
Yukon/Yukon XL 2500
00-06
2/4
150070
150077
Yukon/Yukon Denali
07-10
2/4
150310
150317
Yukon 1500
00-06
2/4
150060
150067
Yukon 1500
07-10
2/4
150310
150317
Yukon 2500
00-06
2/4
150070
150077
Yukon Denali
99-00
2/4
150030
Yukon Denali
01-06
2/4
150180
Yukon XL
07-10
2/4
150310
150317
Black
Stainless
Honda
151290
CRV
97-01
2/4
455030
CRV
02-04
2/4
455040
CRV
05-06
2/4
455090
CRV
07-09
2/4
455100
455107
Element
03-10
2/4
455060
455067
Passport
98-02
2/4
455020
Pilot
03-05
2/4
455050
455057
Pilot
06-08
2/4
455080
455087
Ridgeline
06-10
2/4
455070
455077
Black
Stainless
Santa Fe
01-06
2/4
457010
Santa Fe
07-10
2/4
457030
457037
Black
Stainless
Hyundai
Infiniti
QX4
01-04
2/4
454050
99-01
2/4
455020
Isuzu
Amigo
Black
Ascender
03-08
2/4
450130
Rodeo (Exc. Ann. Edition)
98-04
2/4
455020
Trooper
98-02
2/4
455010
Stainless
450137
Toyota Tundra
9
Jeep
Black
Stainless
Nissan
Black
Stainless
Armada
04-11
2/4
454070
454077
Frontier
98-00
2/4
454010
Frontier
01-04
2/4
454020
Frontier
05-11
2/4
454090
Pathfinder
99.5-04
2/4
454030
252077
Pathfinder
96-99
2/4
454040
252197
Pathfinder
05-11
2/4
454090
454097
252177
Pathfinder
08-11
2/4
454150
454157
252237
Titan
04-11
2/4
454070
454077
252200
252207
Xterra
00-01
2/4
454010
Black
Stainless
Xterra
02-04
2/4
454060
Xterra
05-11
2/4
454120
454127
Black
Stainless
Cherokee
84-01
2/4
252050
Cherokee Sport
97-01
2/4
252050
Commander
06-10
2/4
252160
Grand Cherokee
99-04
2/4
252040
Grand Cherokee
05-10
2/4
252130
252137
Liberty
02-04
2/4
252070
Liberty
05-07
2/4
252180
Liberty
08-11
2/4
252170
Patriot
2007
2/4
Wrangler
07-11
2/4
Sorento
03-04
2/4
158020
Sorento
03-06
2/4
458020
Toyota
KIA
Land Rover
Freelander
Black
02-04
2/4
Lincoln
Blackwood
4
Stainless
454097
4Runner
99-02
2/4
453010
4Runner
96-98
2/4
453040
4Runner
03-05
2/4
453210
351080
4Runner
06-08
2/4
453290
453297
2010
2/4
453360
453367
458010
Black
2002
252167
Stainless
453217
Blackwood
2002
2
351070
4Runner
Navigator
98-02
2
351070
FJ Cruiser
07-11
2/4
453300
453307
Navigator
98-02
4
351080
Highlander
01-05
2/4
453110
453117
Navigator
03-04
2/4
351220
351227
Highlander
06-07
2/4
453260
453267
Navigator
05-06
2/4
351280
351287
Highlander Hybrid
06-07
2/4
453260
453267
351300
351307
Highlander Non Hybrid
08-10
2/4
453270
Black
Stainless
Landcruiser
98-07
2/4
453060
RAV4
96-00
2/4
453030
Stainless
RAV4
01-05
2/4
453070
459037
RAV4
06-08
2/4
453280
459040
459047
Sequoia
01-04
2/4
453080
Black
Stainless
Sequoia
05-07
2/4
453240
98-00
2/4
453050
Navigator
07-08
2/4
Mazda
Tribute
01-07
2/4
Mercedes-Benz
ML 350
ML 500
351180
Black
06-11
06-11
2/4
2/4
Mercury
459030
453067
453287
453247
Mountaineer
98-01
2/4
351090
Tacoma
Mountaineer
95-97
2/4
351100
Tacoma
01-04
2/4
453090
453097
351170
Tacoma
05-10
2/4
453250
453257
Black
Tundra
00-02
2/4
453020
456050
Tundra
07-11
2/4
453310
453317
456030
Tundra
03-06
2/4
453220
453227
Tundra Double Cab
04-06
2/4
453230
453237
Mountaineer
02-04
2/4
Mitsubishi
Montero
Montero
Montero Sport
03-06
01-02
2/4
2/4
97-99
2/4
456010
Montero Sport
00-3/00
2/4
456020
Montero Sport
04/00-04
2/4
456040
Stainless
Display Stand
Prominently display grille guards with this simple to
install kit. Applications readily get noticed and are easily
rotated out so hot sellers are always seen.
Grille Guard Display Stand
*Guard Sold Seperately
10001
10
10001
Dodge
CSI Side Bars will add the perfect finishing touch to any truck or
SUV. These bars feature a slip-resistant, recessed step pad that won’t
fade or crack with time, adding safety when entering and exiting the
vehicle. Installation is easy. Simply bolt-on to existing OEM holes. All
brackets and hardware are powdercoated to last.
®
Black powder coated 3" side bars
The black finish will maintain the vehicles OEM look. The powder
coating process bakes on the black finish, providing rugged durability
that will outlast paint, is non toxic, and will resist chipping, cracking,
or fading.
Polished stainless steel 3" side bars
Manufactured from a
highly polished stainless
steel to achieve maximum
strength and offers corrosion
resistance finish from road
hazards and bad weather.
09-11
SB1216B
SB1216S
RAM Quad Cab
09-11
SB1215B
SB1215S
RAM Mega Cab
06-09
SB1213B
SB1213S
RAM 1500 Reg Cab
03-08
SB2008B
SB2008S
RAM 2500 Reg Cab
03-08
SB2008B
SB2008S
RAM 3500 Reg Cab
03-08
SB2008B
SB2008S
RAM 1500 Quad Cab
98-01
SB2000B
SB2000S
RAM 2500 Quad Cab
98-02
SB2000B
SB2000S
RAM 3500 Quad Cab
98-02
SB2000B
SB2000S
RAM 1500 Quad Cab
02-08
SB2003B
SB2003S
RAM 2500 Quad Cab
03-09
SB2003B
SB2003S
RAM 3500 Quad Cab
03-09
SB2003B
SB2003S
Dakota Quad Cab 4-Door
00-04
SB2006B
SB2006S
Durango 4-Door/Aspen
04-09
SB2007B
SB2007S
BLACK
Stainless
Super Duty Super Cab Ext Cab
99-09
SB3000B
SB3000S
Super Duty Crew Cab 4-Door
99-09
SB3002B
SB3002S
F150 Super Cab 4-Door
99-03
SB3004B
SB3004S
SBDISPLAY
Chevy
C/K Ext Cab 2-Door Incl Z71
F150 Super Crew 4-Door
01-03
SB3005B
SB3005S
F150 Super Crew Cab 4-Door
04-08
SB3009B
SB3009S
F150 Super Cab 4-Door (Exc.
04-08
SB3010B
SB3010S
F150 Super Crew (extended cab)
09-10
SB3023B
SB3023S
F150 Super Crew
09-10
SB3024B
SB3024S
BLACK
Stainless
C/K Ext Cab 2-Door Inc Z71
88-98
SB1000B
SB1000S
Sierra 1500 LD Ext Cab 3/4 Dr
99-10
SB1004B
SB1004S
Sierra 2500 LD, HD Ext Cab 3/4 Dr
99-10
SB1004B
SB1004S
SB1004S
Heritage)
GMC
Ford
BLACK
88-98
SB1000B
Stainless
SB1000S
Stainless
RAM Crew Cab
ford
Toyota
BLACK
Sierra 3500 LD, HD Ext Cab 3/4 Dr
99-10
SB1004B
Sierra 1500 LD Reg Cab
99-10
SB1005B
SB1005S
Sierra 2500 LD, HD REG Cab
99-10
SB1005B
SB1005S
Sierra 3500 LD, HD Reg Cab
99-10
SB1005B
SB1005S
Sierra 1500 LD, HD Crew Cab
00-10
SB1009B
SB1009S
Sierra 2500 HD Crew Cab
01-10
SB1009B
SB1009S
Sierra 3500 HD Crew Cab
01-10
SB1009B
SB1009S
Yukon 4-Door 1/2 Ton
00-10
SB1006B
SB1006S
Yukon XL 1/2 Ton
00-10
SB1007B
SB1007S
Canyon Crew Cab
04-06
SB1016B
SB1016S
BLACK
Stainless
Wrangler TJ
97-06
SB6007B
SB6007S
Wrangler LJ Unlimited
04-06
SB6006B
SB6006S
Wrangler JK 2 Door
07-10
SB6008B
SB6008S
Wrangler JK 4 Door
07-10
SB6009B
SB6009S
Black
Stainless
JEEP
Silverado 1500 LD Ext Cab 3 &
4 Dr
99-10
SB1004B
SB1004S
Silverado 2500 LD,HD Ext Cab
3/4 Dr
99-10
SB1004B
SB1004S
Silverado 3500 LD, HD Ext Cab 3
& 4 Door
99-10
SB1004B
SB1004S
Silverado 1500 LD Reg Cab
99-10
SB1005B
SB1005S
Toyota
Silverado 2500 LD, HD Reg Cab
99-10
SB1005B
SB1005S
Silverado 3500 HD Reg Cab
99-10
SB1005B
Tahoe 4-Door 1/2 Ton
00-10
Suburban 1/2 Ton
nissan
Titan King Cab
04-09
SB4014B
SB4014S
Titan Crew Cab
04-09
SB4015B
SB4015S
BLACK
Stainless
Tundra Access Cab
00-06
SB4000B
SB4000S
SB1005S
Tundra Double Cab
04-06
SB4008B
SB4008S
SB1006B
SB1006S
Tundra Double Cab
07-10
SB4012B
SB4012S
00-10
SB1007B
SB1007S
Tundra Crew Max
07-10
SB4013B
SB4013S
Avalanche (No Cladding)
00-10
SB1007B
SB1007S
Tacoma Pre Runner
95-04
SB4003B
SB4003S
Silverado 1500 LD, HD Crew Cab
00-10
SB1009B
SB1009S
Tacoma Ext Cab 4 WD
95-04
SB4003B
SB4003S
05-11
SB4009B
SB4009S
Silverado 2500 LD, HD Crew Cab
01-10
SB1009B
SB1009S
Tacoma Ext Cab 4 Dr
Silverado 3500 HD Crew Cab
01-10
SB1009B
SB1009S
Tacoma Double Cab SB & LB
05-11
SB4010B
SB4010S
Colorado Crew Cab
04-10
SB1016B
SB1016S
FJ Cruiser
06-11
SB4002B
SB4002S
Trailblazer
02-08
SB1013B
SB1013S
11
• Safely keeps your pet in the cargo area, away from driver &
passengers
• Installs in minutes with no drilling
• Innovative design maintains seat movement & easy backseat
access
• Design allows for more visibility than most pet barriers, helping
drivers maintain clear sight for vision
• Custom fits to your vehicle with horizontal & vertical adjustments
• Expandable from 33" to 58" wide. Height is 24" to 46"
• Black matte finish accents any interior décor while preventing
shiny blind spots
• Made with heavy gauge tubing for durability & protective caps
around tubing end prevents rattles
These seats feature black vinyl backing
with black cloth front face and an
attractive stitch design. Back and base
are slotted for 5 point harnesses, with
shoulder straps for optional harness
locations. Lever on both sides to recline
seat back. Sold individually, each
seat can be used for either driver or
passenger side. Universal seat slider included.
Universal
seat Slider
65000
25100
Part # 25000
•
•
•
•
•
•
Lightweight, compact, very easy to use
Will not scratch your paint
Comes with carrying case for storage
Wax-treated to lift dust easily
Great for between car washes
Wood Handle
12
25000
cambuckle tie downs
• Fast and Easy to use
• 1" x 6' & available in a 2 pack or 4 pack
• 300 lbs. Working Load Capacity
ratchet tie downs
W31026
W35016
W32516
• Ratchets provide maximum tensioning with
minimum force
• Available with 800 lbs. or 1000 lbs. Working
Load Capacity
• Available in sizes of 1 1/4" x 8', 1 1/4" x 16',
or Heavy Duty 1 1/2" x 16'
W31026
1" x 6' 300 lbs Working Load Limit 2-Pack
W31046
1" x 6' 300 lbs Working Load Limit 4-Pack
W35016
1 1/2" x 16' Heavy Duty 1,000 lbs Working Load Limit
W32516
1-1/4" x 16' 1,000 lbs Working Load Limit 2-pack
W32518
1-1/4" x 8' 1,000 lbs Working Load Limit 2-pack
W32508
1-1/4" x 8' 800 lbs Working Load Limit 2-pack
24 pk. assorted Bungees
W31046
W32508
W32518
EZ NET
• Moveable hooks for an easy custom fit
• Universal design fits full size and down size trucks-long & short beds
• High strength elastic construction keeps cargo safe & secure
• Elastic design provides constant tension and a
firm hold
• Vinyl coated steel hooks and woven polyester
strap will not mar finish
Set Includes:
(8) 12" (2) 30"
(6) 18" (2) 36"
(4) 24" (2) 48"
w33000
w36000
13
black powder coated
ball mounts
Chrome Hitch Balls
CNC machined for a
precision fit, CSI® Hitch
Balls are manufactured
using hot forged steel
and are chrome plated for
durability. V5 rated.
Part #
Description
101780
1-78" x 3/4" x 1-3/4"
101785
1-78" x 1" x 1-3/4"
102000
2" x 3/4" x 2"
102010
2" x 1" x 2-1/8"
Descriptioin
105160
2-5/16" x 1-1/4" x 2-1/2"
10" Drop 5K Towing 500 Tongue 1" Hole Size
8" drop 5K Towing 500 Tongue 1" Hole Size
6" Drop 4-3/4" Rise 5K Towing 500 Tongue 1" Hole Size
5-1/4" Drop 4" Rise 5K Towing 500 Tongue 1" Hole Size
4" Drop 2" Rise 5K Towing 500 Tongue 1" Hole Size
2" Drop 3/4" Rise 5K Towing 500 Tongue 1" Hole Size
Tri Ball Mount 2 5/16", 2", & 1 7/8" ball 7.5K
5/8" Hitch Pin & Clip Zinc
2" Ball Mount w/2" Ball, Pin & Clip 5K Towing 500 Tongue 1" Hole Size
4-1/4" Drop Combo Kit 2" Ball & Pin 5K Towing 500 Tongue 1" Hole Size
6" Drop Combo Kit 2" Ball & Pin 5K Towing 500 Tongue 1" Hole Size
105165
2-5/16" x 1" x 2"
Ball Mounts feature a black powder coat finish and all steel
construction for long life and durability. Available in various drop
heights, these ball mounts are designed to fit standard 2" receivers.
Class 2 Ball Mount
101205
Part #
102199
102200
102201
102202
102203
102205
103000
105000
105029
105030
105031
Class 2 1 1/4" Drop 3.5K Towing 300 Tongue 3/4" Hole Size
CLASS 5 ball mounts
• Solid Shank • Drop Forged • Towing 15K • Tongue 1.5K
Part #
104201
104203
104205
Descriptioin
101780
Class 5 6" Drop 5" Rise 15K Towing 1.5K Tongue 1 1/4" Hole Size
102205
101785
105160
105165
101205
102203
105029
102202
105031
105030
102201
105000
104201
102200
104205
104203
102199
103000
14
• Super bright 35 watt HID bulb
• Durable ABS housing with glass
reflector
• Built-in ballast
• Heavy-duty indexed adjustable
mount for easy installation
• Snap-on clear cover
• Includes wiring harness with
switch & relay
• Sold individually
• FOR OFFROAD USE ONLY
Part #
Description
W4500
Wiring Kit Hid Lights W/Relay
W4520
Wireless Acc Light Control
W4504
4" Off Road Hid With Cover
W4507
7" Off Road Hid With Cover
W4604
4" Light Cover For Hid Light
W4607
7" Light Cover For Hid Light
CSI® 4 X 4 Jack is an essential part of your off-road recovery
equipment. Ideal for Lifting, Pulling, Clamping and Spreading on
4-Wheel Drive Vehicles.
W4504
W4507
CSI® Tire Deflators provide an easy way to automatically deflate
your tires to a precise pressure for off highway driving.
W48
W60
Part #W48
4 X 4 Jack
Boxed
Lifting Capacity
4,660 lbs.
Maximum Height
48"
W11
Part #W60
4 X 4 Jack
Boxed
Lifting Capacity
4,660 lbs.
Maximum Height
60"
W11
Extra Wide Base for 4x4 Jack
W45
4x4 Jack Handle isolator Ea.
W45-10
4x4 Jack Handle isolator 10 Pack
W45
C59000
15
Speed, power and compact design make CSI® Winches a must for all your utility and recovery applications. These winches have an
efficient differential planetary gear train, pistol grip remote and a rugged roller fairlead at an affordable price.
Part #W2500
Rated Line Pull
2500 lbs. (1,134 kgs.) single line pull
Motor
Permanent magnetic DC 12v with 1.1hp output
Gear Train
Differential planetary
Gear Ratio
153 to 1
Fairlead
4-way roller fairlead
Wire Rope
7/32" x 32' (5.5mm x 10m)
Drum Size
1 1/4" x 2 7/8" (31.75mm x 72mm)
Dimensions
11 13/16" x 4 1/8" x 4 1/8" (300mm x 105mm x 105mm)
W2500
Part #W3500
Rated Line Pull
3500 lbs. (1,134 kgs.) single line pull
Motor
Permanent magnetic DC 12v with 1.3hp output
Gear Train
Differential planetary
Gear Ratio
153 to 1
Fairlead
Wire Rope
7/32" x 32' (5.5mm x 10m)
Drum Size
1 1/4" x 2 7/8" (31.75mm x 72mm)
Dimensions
11 13/16" x 4 1/8" x 4 1/8" (300mm x 105mm x 105mm)
W3500
PART #P8000
P8000
Part #P12000
Related Line Pull
12000 lbs. (5,443 kgs.) single line
Motor
Series wound DC 12V with 6.0hp/4.3kw output
Gear Train
3 stage planetary
Gear Ratio
265 to 1
Clutch
Sliding Ring Gear
Braking Action
Automatic in the drum
Battery
Recommended 650 CCA minimum for winching
Battery
2 gauge, 72" (1.83m)
Fairlead
Wire Rope
3/8" x 85' (9.5mm x 26m)
Drum Size
2.5" x 8.9" (63.5mm x 226mm)
Dimensions
21.6" x 6.3" x 8.6" (548mm x 160mm x 250mm)
Mounting Bolt Pattern
10" x 4.5" (254mm x 114.3mm)
16
Rated Line Pull
Motor
Permanent Magnetic DC 12v w/ input 5.5hp/2.2 hp output
Gear Train
3 stage planetary
Gear Ratio
265 to 1
Clutch
Sliding Ring Gear
Braking Action
Automatic in the Drum
Battery
Battery
2 gauge, 72" (1.83mm)
Fairlead
Wire Rope
5/16" x 92' (8.33mm x 28mm)
Drum Size
2.5" x 8.8" (64mm x 224mm)
Dimensions
21.1" x 6.3" x 8.6" (535mm x 160mm x 218mm)
Bolt Pattern
10" x 4.5" (254mm x 114.3mm)
P12000
PART #W8500
W8500
Rated Line Pull
Motor
Series wound DC 12v with 5.5hp/4.0kw output
Gear Train
3 stage planetary
Gear Ratio
216 to 1
Clutch
Sliding Ring Gear
Braking Action
Automatic in the Drum
Battery
Battery
2 gauge, 72" (1.83mm)
Fairlead
Wire Rope
5/16" x 92' (8.3mm x 224mm)
Drum Size
2.5" x 8.8" (63.5mm x 224mm)
Dimensions
21.3" x 6.3" x 9.8" (540mm x 160mm x 250mm)
10" x 4.5" (254mm x 114.3mm)
W9500
Part #W9500
Related Line Pull
9500 lbs. (4,301kgs.) single line
Motor
Series wound DC 12v with 6.0hp/4.5kw output
Gear Train
3 stage planetary
Gear Ratio
216 to 1
Clutch
Sliding ring gear
Braking Action
Battery
Battery
2 gauge, 72" (1.83mm)
Fairlead
Wire Rope
5/16" x 92' (8.3mm x 28m)
Drum Size
2.5" x 8.8" (63.5mm x 224mm)
Dimensions
21.3" x 6.3" x 9.8" (540mm x 160mm x 250mm)
10" x 4.5" (254mm x 114.3mm)
W12000
Part #W12000
Related Line Pull
Motor
Series wound Dc 12v with 6.0hp/4.3kw output
Gear Train
3 stage planetary
Gear Ratio
273 to 1
Clutch
Sliding ring gear
Braking Action
Battery
Battery
2 gauge, 72" (1.83m)
Fairlead
Wire Rope
3/8" x 85' (9.5mm x 26m)
Drum Size
2.5" x 8.8" (63.5mm x 224mm)
Dimensions
21.6" x 6.3" x 9.8" (548mm x 160mm x 250mm)
10" x 4.5" (254mm x 114.3mm)
17
Brute series Winch Accessories
Utilize your CSI® winch to its full potential by combining it with our CSI® winch accessories. From mounting and protecting your winch,
to maximizing recovery pulling power and effectiveness, we have the solution to make your winch more productive and versatile.
Synthetic rope
Wire rope
• Lighter than steel cable
• Won’t kink
• No more burs from steel cables
to cut your hand
BRUTE SERIES WINCH ACCESSORIES
W226 &
W236
Part #
Syn Rope 3/8" X 100’' W/Hook
W225
Syn Rope 3/8" X 50' W/Eyelet
W226
Syn Rope 11/32" X 100' W/Hook
W235
Syn Rope 11/32" X 50' W/Eyelet
W236
W125/W8595
Shackles & Rigging equipment
WINCH ACCESSORIES
BRUTE SERIES accessories
W225 &
W235
Part #
Recovery Accessory Kit With Bag
W302
10 Ton Snatch Block W/Storage Bag
W309
13.5 Ton Greaseable Snatch Block
W/Storage Bag
W319
Shackle 3.25"
W511
Shackle 4.75"
W512
Receiver & Shackle Combo
W580
Receiver Hook 7500lb Capacity
W590
W309
Part #
Replacement Winch Cable 3/8" X 85'
W125
Wire Rope 95x5/16for 9.5K & 8.5K W
W8595
Fairleads
W590
W110
W512
W111
W580
W319
W511
Recovery straps
WINCH ACCESSORIES
Part #
4 Way Roller Fairlead W & P Series
W110
Alum Hause Fairlead for W & P
Series & Synthetic Rope Only
W111
Part #
Snatch-Um Strap 2.5" X 20' 18,000lbs
W307
Snatch-Um Strap 2.5" x 30' 18,000lbs
W308
Tree Trunk Strap 3" x 10' 18,000lbs
W310
W302
NEW
BAG!
W302 Includes:
2.5" x 20'
Snatch-Um Strap
W307
18
2.5" x 30'
Snatch-Um Strap
W308
3" x 10'
Tree Trunk Strap
W310
W308
Snatch-Um Strap
W512
4.75" Shackle
W309
Snatch Block W/Storage Bag
W580
Receiver & Shackle Combo
--
Pair Of Gloves
--
Zippered Bag W/Handles &
Wired With A Stay Open Frame
winch Remote Controls
Winch Mounting Plate
Winch Cover
Protects your Brute Series Winch from
the elements.
W119
BRUTE SERIES WINCH ACCESSORy
Part #
Universal Mounting Plate
P130
W119
Tow Hooks
W130
wireless winch Control
• Compatible with all CSI® winches
• Operate winch safely where ever
needed within 30 yard range
• Small and lightweight, key chain
remote
• Easy installation
W100
CSI® Tow Hooks secure firmly to the
vehicle’s frame to provide an attachment
point for wire hooks, straps, and chains.
Manufactured from forge steel, each tow
hook features the rugged durability to
support up to 10,000 lbs. Available in
powder coated black and chrome finishes.
Winch Cover W/CSI Logo
Part #
W100
*Mounting Bolts Not Included.
W520
TH100
TH101
Part #
Brute W-Series Winch Remote Control
W130
Wireless Winch Remote Kit
W520
P12000 Winch Remote Control
P130
TH100
Heavy Duty Tow Hook
Black
TH101
Heavy Duty Tow Hook
Chrome
Brute Series Replacement Parts
Winch Display
Part #WDISPLAY
POP DISPLAY
Winch Display - 3 Tier,
Header Card Not Included
BRUTE SERIES Replacement Parts
Replacement Motor For W8500
W85
W95/w120
W186
W126/W196
W124
W910
W150
W140/W160
Part #
WDISPLAY
Part #
W85
W95
W120
Winch Hook W/Latch & Strap
W124
Brushes For 12k Winch
W126
Solinoid For 12k Winch
W140
Engage Handle For 12K, 9.5K & 8.5K
W150
Solinoid For 95 & 85 Winch
W160
Brushes For 8.5k Winch
W186
Brushes For 9.5k Winch
W196
Termal Sensor Kit
W910
19
Quick Disconnect Solenoid kit
Part # W8104
The solenoid kit allows power to the front or back of the
vehicle to be turned on and off at the flip of a switch.
- Includes:
(1) solenoid
(1) switch & switch holder
(2) large protective boot
(2) small protective boot
(1) dust cap
(1) wiring
W8104
Quick Disconnect Power Cable
For wiring 12V battery power from the battery to the front
or back bumper, providing power to a multi-mount winch
or other accessories.
- Includes (2) plugs and (4) metal crimp-on ends
W8160
W8124
W8150
W8104
Quick Disconnect Solenoid Kit
W8120
Quick Disconnect 20' Kit
W8124
Quick Disconnect 24' Kit
W8150
Quick Disconnect Dust Cap
W8160
Quick Disconnect Plugs Only
W8175
Quick Disconnect 7.5' Kit
brute series
winch Cradle
Mount
Winch cradle
for Brute Series
winches. Fits
standard 2"
receivers.
Collapsable handles
for easy, compact
storage when not in
use. Use our wiring
kits to maximize
your CSI winch use
for front and rear
applications.
20
W816
Brute Series Cradle Mount
Part #
W816
utility Winch accessories
Fairleads
Synthetic rope
• Lighter than steel cable
• Won’t kink
• No more burs from steel cables to cut your hand
Remote socket & switch
W116
W260
W248 &
W249
W117
UTILITY WINCH ACCESSORIES
W252
Part #
W248
W249
Utility Winch
Replacement Parts
Part #
Roller Fairlead For 2500/3500lb Winch
W116
Alum Hause Fairlead Utility Series
For Synthetic Rope
W117
Mounting Plate
utility WINCH ACCESSORIES
Part #
Handle Bar Mount Rocker Switch
W252
Remote Socket/Mount for W2500/W3500
W260
(For Csi Utility Winches)
Universal Mounting Plate for W2500/
W3500 Utility Winches
Part #
Replacement Winch Cable 3/16" X 41'
W250
Replacement Motor For 2500 Winch
W251
Solinoid For W2500 Winch
W253
W118
UTILITY WINCH ACCESSORy
Mount Plate For 2500/3500lb Winch
Part #
W118
Pulley Block
W251
W253
W115
W250
UTILITY WINCH ACCESSORy
Pulley Block For 2500/3500lb Winch
Part #
W115
21
Heat Shield Insulation helps to eliminate heat, cold,
moisture, and noise. It’s flexibility and easily customized
size makes it ideal for many applications. Use CSI®
Heat Shield Insulation to shield radiant heat from floor
boards, air cleaner housings, intake tubes, carburetors,
fuel pumps and many more areas of a car, boat, RV,
or heavy-duty truck. It has also been found helpful for
shielding electrical boxes and instruments from intense
heat. Customize the size and shape by simply cutting
off excess material with scissors or a sharp knife.
Heat Shield Insulation - 4' x 6'
25070
Do not directly apply on headers, mufflers, or exhaust pipes.
Do not use on open flame.
C5700
Secure the hood of the vehicle while giving it
a competition look at the same time. Allows
for a quick removal of the hood or deck and
is easy to install and use. Great for the added
protection of hoods that tend to break free due
to high force winds or excessive speeds. Kits
are chromed steel and work on virtually every
vehicle; early, late, domestic, or imports. All
necessary hardware is included.
Shifter Boots are designed to accommodate the additional length, width and height of floor modifications in competition shifter
installations. Accordion style shifter boot allows for easy shifting, while the chromed plate helps seal out cold air, road dust, grease, and
debris. Kits include trim plate and mounting screws. Universal design.
Small
5-5/8" x 6-3/4"
C6058
Large
7-3/4" x 8-3/4"
C6059
C6059
C6058
22
•
•
•
•
•
Fully CNC Machined - Polished Housing
Premium caps with brass terminals, and a low-saturation Ignition module
High Output Coil which Produces 50,000 volt spark through to 7,500 RPM
4340 Chromolly Steel bottom Gear, for use with cast and Steel Billet Cams
Offers true spark alignment for instantaneous response at high RPM
Part #
Description
66641
HEI Distributor All AMC V8
66841
HEI Distributor Ford 289 - 302W
66842
HEI Distributor Ford 351C - 460
66741
HEI Distributor Chrysler 318-360
66941WB
HEI Distributor SBC W\50K Coil Cap
66842
66841
66641
66941WB
66741
Part #
Description
66946
Replacement Cap & Rotor for HEI Dist
66947
Replacement Modlue for HEI Dist
66946-CAP
66946-ROTOR
66947
• Hi Performance Control Module
• Brass Terminals On Cap & Rotor
For Best Connectivity
• Capacitor Prevents Radio Static
• Hardened Gear
Take your new distributor to the next level by
installing CSI® Distributor Hold Down Clamps.
These chrome plated clamps are made from top
quality materials. They are the perfect way to
dress up your engine compartment.
Chevy V8 (63-UP)
Competition Style
C5710
Ford
OEM Style
C5720
C5710
C5720
23
• A billet of 6061 - T6 aluminium CNC is
machined into a perfect housing for
incredible strength, precision and looks
• Sealed ball bearings, sintered bushing, 1/2
inch hardened steel shaft
• Extremely accurate magnetic pickup which
never requires adjustment
• Designed with a small base and cap to suit all
makes and models
65842
65841
65941
Part # Description
65800
65801
65941
Chev Pro Billet Distributor
65841
Ford 289/302w Pro Billet Distributor
65842
Chrysler 318 Pro Billet Distributor-360
Part #
Description
65800
Red Dist Cap For Pro Billet Dist Post Terminals
65801
Rotor For Pro Billet Dist
Wire Seperator & Loom Kits
Separator Kit: For racing or
street use where extreme high temps
cause normal materials to sag or melt.
Loom Kits: Helps to lift and
separate wires to prevent cross-firing.
C3010
C3000
C3040
C3005
C6022
C3020
Wire Separator Kit
Blue
C3000
Wire Loom Kit
Chrome/Blue
C3005
Wire Loom Dluxe Kit
Chrome/Blue
C3010
4-Wire Loom Kit
Chrome-Tall
C3020
4-Wire Loom Kit
Chrome
C3040
2-Wire Loom Kit
Chrome
C3050
Wire Loom Ball Milled with Bracket
Aluminum
C6022
24
C3050
CSI’s 100% new starter units feature an offset design to result in more
clearance between the oil pan and the starter, as well as the ability to be
rotated for additional chassis clearance if necessary. The high-torque,
high-output motor spins the engine over faster than stock starters delivering
40%-50% more cranking power.
66258
66259
66268
66256
Small & Big Block Chevy
Mini Starter
Hi-Torque
66256
Universal GM
Mini Starter
Ultra Hi-Torque 2kw
66258
Universal GM
Mini Starter (Chrome)
Hi-torque
66259
Chevy
Starter
Staggered/Bolt Pattern
66268
CSI’s Starter Heat Shield helps eliminate starter problems
caused by the close proximity of the exhaust to the starter.
The radiant heat of the exhaust easily produces enough heat
to destroy the windings of the starter and solenoid. To cure
this problem, use a heat barrier to deflect the radiant heat
produced by an exhaust system. The unique construction of the
aluminized material provides protection by deflecting up to 90%
of the radiant heat.
Small Block Chevy
Polished
C6070
25
Replace your old and rusty OE Timing Chain Cover
with a flashy new modern looking cover. Your
timing chain is vital for keeping your engine running
correctly, and what better way is there to protect
it than with a new chrome plated steel or polished
aluminum cover, guaranteed to provide durability
and strength.
C6028
Mounting bolts included with C6028.
1502
1500
FINISH
Bulk
Carded
Chevy 283-350 Timing Chain Cover w/o Tab
Chrome
1500
C1500
Chevy 396-454 Timing Chain Cover w/o Tab
Chrome
1502
Chevy Small Block V8 Timing Chain Cover
Polished Aluminum
CSI® Timing Tabs are marked to indicate what degree the distributor
should be set up for and will ensure that your engine is performing
at it’s best. Tabs are available in chrome plated steel and polished
aluminum for long life and durability, as well as great looks!
C1503
C1501
C1504
Small Block Chevy 283-350
Timing Tab with 7" Pointer
C1501
Big Block Chevy 396-454
C1503
Small Block Chevy 283-350
C1504
26
C6028
Steel Billet Flywheels
• Fully CNC Machined from a high tensile aircraft material steel alloy
• Precisionly balanced for internal or external specifications
• For 10.5" clutch single bolt pattern
6268
Part #
Description
6168
168 Tooth SBC Steel Billet Flywheel
6268
168 Tooth SBC Late Steel Billet Flywheel
6168
STEEL FLEXPLATE
• Flexplates are made from high tensile strength material
• Made to handle high RPM applications
7168
Part # Description
7268
7168
168 Tooth SBC Steel Flexplate
7268
168 Tooth SBC Late Steel Flexplate
Harmonic Balancers
Installing or replacing a Harmonic Balancer will drastically
increase the life of your engine by dampening harmful
engine vibrations. The harmonic balancer is essential to
the longevity of an engine preventing crankshaft failure.
SB Chevy
66511
8"
66511
Big Block Chevy
External
66512
Small Block Chevy 400
External
66513
66512
66513
27
Cylinder Head parts
Part #
Description
C4138
3/8 Rocker Arm Studs
C4176
7/16 Rocker Arm Studs
C4205
Sbc 5/16 Flat Guide Plates (8)
C4215
Sbc 5/16 2pc Adjustable Flat (8)
C4230
289-302-351w Guide Plates (8)
C4243
Bbc 3/8 Guide Plates (8)
C4253
351c 3/8 Guide Plates
C4138
C4230
C4205
C4215
C4176
C4243
Stainless Steel
Roller Rockers
• Manufactured from 21M4 high grade
stainless steel
• Feature greater strength and durability
• Capable of withstanding valve spring load
over 750+ PSI
Part #
Description
3153
SS Roller Rockers 1.5R 3/8" SBC
3157
3163
3167
4177
SS Roller Rockers 1.7R 7/16" BBC
5163
SS Roller Rockers 1.6R 3/8" SBF
5167
SS Roller Rockers 1.6R 7/16" SBF
Polished Aluminum battery mount
CSI’s custom designed ball milled Optima Battery Tray is
lightweight and durable. It is manufactured from polished
aluminum that will withstand the vibrations that plastic
mounts cannot. Optima battery sold separately. Custom
made billet battery mounts for Optima Batteries. Set comes
with the battery tray, cover, posts and hardware.
** Optima battery sold separately
28
66250
All alloy cylinder heads are made using a superior gravity die cast process unlike the competition who make use of a sand casting.
These heads are CNC machined and flow tested.
SBC Aluminum Heads
(Angle Plug & Straight Plug Design)
Valve Size 2.020 Intake-1.600 Exhaust
*Heads with A= Angle Plug
*Heads with P= Polished
*Heads with AP= Angle Plug Polished
*Heads with S= Straight Plug
Part #
Description
6500
SBC Alloy Heads 64cc / 190cc S/Plug-Bare
6500A
SBC Alloy Heads 64cc / 190cc A/Plug
6520AP
SBC Alloy Heads 66cc / 195cc A/Plug Polished
6520P
SBC Alloy Heads 66cc / 195cc S/Plug Polished
6525
SBC Alloy Heads 68.5cc / 190cc S/Plug
6530
SBC Alloy Heads 64cc / 210cc S/Plug
6530A
6535
6535A
6550
6560AP
SBC Alloy Heads 66cc / 215cc A/Plug Polished
6560P
SBC Alloy Heads 66cc / 215cc S/Plug Polished
Part #
Description
6570
SBC Alloy Heads CNC Ported 64cc / 215cc S/Plug
6400
Alloy Head 72cc / 265cc
6570A
SBC Alloy Heads CNC Ported 64cc / 215cc A/Plug
6410
CNC Ported Head 72cc / 265cc
SBCComplete
BB Chrysler Aluminum Heads
SBC Vortec Head
Part # Description
6572
SBC Alloy Heads Late Vortec 64cc / 190cc
SBC Late Model LS1 Heads
Part #
Description
6600
SBC Alloy Heads Late LS1 62cc / 190cc
6610
SBC Alloy Heads Late LS1 CNC Ported 64cc / 190cc
Part # Description
6620
L92 Chev Alloy Heads 68cc / 274cc
6800
SBF Alloy Heads 60cc / 175cc
6630
L92 Chev CNC Alloy Cylinder Head 68cc / 274cc
6800P
SBF Alloy Heads 60cc / 175cc Polished
6805
6805P
6810
BBC Aluminum Heads
SBF Aluminum Heads
Part #
Description
6810P
6700
BBC Alloy Head Oval Port 110cc / 300cc
6815
SBF Alloy Heads CNC Ported 60cc / 230cc
6720
BBC Alloy Heads 115cc / 320cc
#6840
SBF Late Model Alloy Head Smog Legal 64cc / 175cc
SBFComplete
351C Aluminum Heads
Part #
Description
6970
Alloy 3V Head 74cc / 210cc
6980
Ford Alloy CNC Ported 4V Head 74cc / 233cc
BBF 429/460 Aluminum Heads
BBCComplete
Part #
Description
6900
BBF 429/460 Alloy Heads 95cc / 300cc
6910
BBF 429/460 Alloy Heads CNC Ported STG 3 97cc / 305cc
29
1131
Premium quality transmission accessories are vital in keeping your
transmission looking and running great! All accessories are made
from the finest materials to ensure long life and durability.
Chrome Plated
Transmission Pans
Replacing your transmission pan will add fluid capacity to
your transmission. Extra fluid means more cooling, and more
cooling means better efficiency and performance, increasing
the life of your transmission!
Aluminum
Transmission Pan
GM Turbo 350
Finned includes Bolts & Gasket
GM Turbo 350
Finned
1131
GM Turbo 400
Finned
1135
1135
1140
1603
1602
1140
Chrome Dipsticks
flexible Dipsticks
TRANS Flexible Dip Stick
C5004
These thin metal rods are used to measure the oil levels in an
otherwise inaccessible space. All Dipsticks come marked with
level indicators to make it easy to read. Dipsticks are essential
for maintaining the proper levels of oil in your transmission to
keep your ride running properly.
TH350
C5004
FINISH
BULK
TH400
C5005
GM Turbo 350 Trans. (34")
Chrome
1602
TH700
C5006
GM Turbo 400 Trans. (24" Long)
Chrome
1603
Satin Aluminum
Transmission Cooler
CHrome
Flywheel Dust Cover
Transmission Oil
Coolers will keep
the transmission
fluid cooler,
resulting in more
reliable and
consistent shifts
under racing
conditions.
This chrome plated flywheel
dust cover will block dust
from getting into the inner
workings of your flywheel,
causing it
to run poorly.
The chrome
plating will add a
modern, stylish look under
your hood, while providing
long life and durability.
Dual Pass
30
15"
8005
GM Turbo 350 & 400
2-7/8" Starter Slot
1150
Made from the finest materials available, CSI® Oil Accessories
will help you optimize your engine’s performance while
adding stylish good looks under your hood.
C6000
C1601
Billet & Chrome Dipsticks
These thin metal rods are used to measure the oil levels
in an otherwise inaccessible space. All Dipsticks come
marked with level indicators to make it easy to read.
Dipsticks are essential for maintaining the proper levels of
oil in your engine to keep your ride running properly.
FINISH
EACH
Big Block Chevy; 283-350 Engine (55-79)
Billet Aluminum
C6000
Big Block Chevy; 396-454 Engine (65-90)
Chrome
C1601
Small Block Ford; 260-289-302 Engine
Chrome
C1604
Small Block Chevy 283-350 Engine (55-79)
Chrome
C1600
C1604
C1600
1120
flexible Dipsticks
C5001
Engine Flexible Dip Stick
80-98 SBC
C5001
Pre 79 SBC
C5002
65-90 BBC
C5003
1121
1110
1114
1100
1101
Oil Pans
These quality oil pans remove oil from
the crank quickly and efficiently, then
redirect it towards the oil pump pickup.
Pans are manufactured using superior
materials to prevent warping and
insure a proper seal and fitment.
Small Block Chevy; 283-350 (Driver Side Dipstick)
55-79
Small Block Chevy; 283-350 (Driver Side Dipstick); 7quart
55-79
Small Block Chevy
1/2" x 20"
C1614
Unplated
1100
1101
Orange
1114
85+
1110
Big Block Chevy; 396-402-427-454
65-90
1120
Big Block Chevy; 396-402-454
65-90
Chrome Magnetic Drain Plug
Magnetic Drain Plugs will attract and hold
metal particles that circulate through your
lubricant. Left unattended, such particles
could result in damage.
Chrome
1121
Zinc Oil Pump
Pickup
Oil Pump Pickups keep your motor bathed with
a healthy supply of oil. Zinc plated for long life
and durability.
Standard Pickup For 1114 Pan
C1612
31
With today’s high vacuum systems and added
stress you need a valve cover that is guaranteed
to withstand the rigors of todays engines.
Replacing your valve cover is a great way to
solve oil leak problems, reduce engine noise, and
improve your vehicle’s under-hood appearance.
A new valve cover will also help quiet valve train
noise while dissipating engine heat.
1001
Chrome Plated
Valve Covers
1003
These valve covers are an excellent, cost
effective alternative to those who seek highluster Chrome Valve Covers but could do without
show car prices. Made from a durable, chrome
plated steel, they are available in a tall and short
design depending on your rocker assembly.
Fabricated Aluminum
Valve Covers
Fabricated entirely from aluminum - ultra
lightweight! These valve covers are TIG welded
and CNC manufactured to eliminate distortion
and ensure a perfect fit. The one-piece billet
aluminum gasket rail provides a precision-flat
surface for superior sealing. This air-tight sealing
allows the engine to pull greater vacuum for
improved ring seal and power. Easy to install and
sold as a pair.
1068
1005
1006
1069
1073
1010
1074
Polished Aluminum
Valve Covers
CSI’s polished aluminum valve covers are
guaranteed to draw attention to your engine
compartment. Made from a quality die cast
aluminum that is polished to help resist oil
staining, each design is CNC machined to ensure
a perfect fit when installed.
Chevy
Style
Big Block
Tall: Plain with Hole & Baffled
Big Block; 396-454 V8 (65-72)
OEM Short-Baffled Center Bolt
1077
1060
1066
Chrome
1075
Fabricated Alum.
Polished Alum.
1074
1006
Big Block; 396-502 (65-95)
with Rails
V8 396-502 (65-95)
Tall: Baffled
1073
Small Block
Short: Plain with Hole & Baffled
1066
Small Block
Tall: Plain with Hole & Baffled
1060
Small Block (57-86)
Short: “Finned” with Hole
1068
1005
Small Block; 283-350 (58-86)
Short: Baffled
1001
Small Block; 283-350 (58-86)
Tall: Baffled
1003
Small Block; 283-350 (58-86)
with Rails
1069
Small Block; 5.0-5.7L (87-97)
with Rails Center Bolt
1075
FORD
Style
Small Block; 260-289-302-351W & 5.0L (62-85)
with Rails Height 3 1/2"
Small Block; 260-289-302-351W & 5.0L V8 (62-UP)
Baffled
32
Chrome
Fabricated Alum.
1077
1010
Polished Alum.
CSI® valve cover accessories are designed for performance, ease of maintenance, and longevity. So stock up today on premium
breathers and caps, PCV valve, quality rubber grommets, and an assortment of bolts!
Chrome & Aluminum Breathers
Chrome
Add the finishing touch to your new valve cover or liven
up your old one with a new valve cover breather! Sold
individually, these chrome-plated and polished aluminum
valve cover breathers twist on or push in. Built in filter
element protects your engine and lets it breathe freely.
Push-In
Round: 2-3/4" Dia.
C1700
Push-In
Round: Mopar Style
C1705
Push-In
Round: 2-3/8" Dia.
C1708
Push-In
Round: Filter
C1718
Push-in
Oval: Finned
Push-In PCV
Round: 2-3/4" Dia. with 3/4" Neck
C1710
Push-In with Tube
Round: 2-3/4" Dia.
C1704
Twist-On
Round: 2-3/8" Dia.
C1709
C1720
C1705
C1704
C1700
C1708
C1710
C1709
Polished Alum.
C1720
C1718
Rubber Grommets
These oil resistant rubber grommets help to control oil. They’re
designed for use with valve covers that do not have an oil control
baffle system. Carded Sold in pairs.
Carded
Push-In with Foam Insert for Aluminum Valve Cover
1" ID x 1-1/4" OD
C1712
Push-In with Foam Insert for Steel Valve Cover
1" ID x 1-1/4" OD
C1713
PCV for Aluminum Valve Cover
3/4" ID x 1-1/4" OD
C1706
PCV for Steel Valve Cover
3/4" ID x 1-1/4" OD
Push-In
1" ID x 1-1/4" OD
Push-In or PCV
3/4" ID x 1-1/4" OD
Chrome oil fill cap
The Oil fill cap covers the
opening into the valve cover.
This push-in style oil fill
cap chrome plated and then
polished to a brilliant finish.
Push-In
1.25" Hole
1702
C1712
C1707
C1713
C1706
1701
1701
1702
C1707
Billet Aluminum PCV Valve
C1703
C1703
Bulk
This durable billet aluminum
PCV valve connects the
crankcase to the intake
manifold in order to maintain
proper and extract engine
vacuum.
PCV Valve with 3/4" Neck
C6016
C6016
33
Mini Bolt
1-3/8" with 1/4-20 x 1 3/8" Stud
4-Piece
C3160
Mini Tab
1-1/2"
4-Piece
C3156
Small Block Chevy
Spreader Bars: 4-3/4" Side
4-Piece
C3153
T-Bar Nut: 4 1/4"
Stud: 1/4-20 x 1 3/8"
4-Piece
C3152
T-Bar Wing Nut Stud Only
1/4-20 x 1 3/8"
4-Piece
C3170
T-Bar Wing Nut: 5-3/8"
Stud: 1/4-20 x 1 3/8" Stud
4-Piece
C3151
Wing Nut: 3-1/2"
Thread: 1/4-20 x 1"
4-Piece
C3158
Wing Bolts Deluxe
5/16-18"
4-Piece
C3159
Chrome Bolt Set
Cen Bolt Steel
8-Piece
C6038
C3160
C3156
C3153
C3159
C6038
C3170
C3152
Replacing your alternator will add charging power back to
your vehicle. Utilizing CSI’s quality alternator accessories
will assist in the installation and ensure that your alternator
stays cool and running at optimum performance!
66445-1
Chrome Alternators
66445-8
CSI’s GM Style one-wire hook-up makes for easy installation.
Completely assembled with all-new components and ready to bolt-on.
Beautifully chrome plated. One-wire alternators can be used in place
of alternators with an external regulator.
C3900
C3908
C3910
100 AMP
Single Wire
66445-1
80 AMP
Single Wire
66445-8
Chrome Alternator Brackets
Dress up your engine compartment with a CSI’s chrome plated
alternator bracket. Made from heavy gauge steel, polished to a high
luster, then chrome plated for lasting beauty.
C3905
C3906
C3912
Universal Arm
1" Wide x 14" Long with 4" Slot
C3900
Small Block Chevy 283-350 (Pre-69)
SWP Header
C3905
Chevy 283-350 (Pre-69)
Header Bracket : Left Side
C3906
Big Block Chevy 396-454 (69-UP)
LWP: “OEM” Style
C3910
Small Block Chevy 305-350 (69-75)
C3908
C3909
Low Mount: Left Side
C3912
Polished Aluminum
Alternator Fan Blade
34
C8867
Polished Aluminum pulleys
Heat treated to T-6 specifications and are made of a 356 polished aluminum alloy.
C8840
C9483
C9479
C9485
C9487
Chrome pulleys
Chrome plated steel pulleys are highly polished to give that custom finished look. Designed and engineered to match factory
specifications, they will fit a variety of Chevy cars and trucks.
C9601
C9603
C9610
C9723
C9605
C9607
C9724
Polished Alum.
Chrome
Big Block Chevy 396-454 V8
Single Groove
Water Pump: Short Water Pump: Upper
C8840
Single Groove
Water Pump: Short Water Pump: Lower
C8841
Double Groove
C8842
Double Groove
C8843
Triple Groove
C8849
Double Groove
Crankshaft: Long Water Pump:Upper
C9723
Triple Groove
Crankshaft: Long Water Pump:Lower
C9724
Early GM
Single Groove
Power Steering Pump
C9610
Small Block Chevy
Single Groove
Alternator
Small Block Chevy 283-350 V8
Double Groove
Crankshaft: Long Water Pump:Lower
Double Groove
Crankshaft: Short Water Pump:Lower
C9481
C9603
Double Groove
Water Pump: Long Water Pump:Upper
C9483
C9605
Double Groove
Water Pump: Short Water Pump:Upper
C9479
C9601
C9487
C9607
35
Polished Aluminum pulleys
C8842
C8841
C8849
C8843
C8858
C9481
Chrome pulleys
C9600
C9602
C9604
C9608
Polished Alum.
Chrome
Single Groove
Crankshaft: Short Water Pump: Lower
C9480
C9602
Single Groove
Water Pump: Long Water Pump: Upper
C9482
C9604
Single Groove
C9478
C9600
Triple Groove
Crankshaft: Long Water Pump: Lower
C9486
C9608
Small Block Chevy V8
Double Groove
C9485
Double Groove
C9481
Single Groove
C9480
Single Groove
Water Pump: Long Water Pump: Upper
C9482
Single Groove
C9478
Triple Groove
C9486
Triple Groove
Short Water Pump: Lower
C8858
Bolts for Aluminum
Water Pump Pulley
C9490
Fits Small Block and Big Block aluminum
pulleys. Designed to withstand stress for
long life and durability.
4-Piece LWP
36
C9490
water pumps
8100
Heavy duty aluminum and chrome water pumps are ideal for the street. They help
provide maximum cooling and prevent overheating. Engineered for the roughest
conditions, these water pumps provide maximum flow, pressure, and equal distribution
to both sides of the block.
Small Block Chevy
Aluminum
Chrome
8812
8101
Long
Small Block Chevy
Short
Small Block Chevy (65-68)
Short
8102
8100
Small Block Chevy: HP
Short
8810
Small Block Chevy: Reverse Pump
Long
8813
electric
Water pumps
8812
8900/8910
• Eliminate unnecessary weight and impeller
drag experienced at high RPM
• Durable lightweight aluminum pumps push up
to 35+ gallons of water per minute
Part #
Description
8900
Electric Water Pump SBC
8910
Electric Water Pump BBC
8102
water necks
C1330
Water Necks come in polished aluminum and chrome
plated steel to provide a lighter weight option to cast-iron
outlets. Available for a variety of applications including a
universal design with three different options.
POLISHED Alum.
Chevy (55-64)
Chevy (66-75)
Ford 260-289-302-351W (65-75)
*C1330
Angled
*C1332
w/Gasket
C1333
Straight-Up
Small Block Chevy
40˚ Swivel
*C6012
Small Block Chevy
90˚ Swivel
*C6014
Small Block Chevy
Straight-Up
*C6011
15˚
*C6015
Chrome
Straight-Up
Small Block Chevy
C1332
C1328
C1333
C6011
*C1328
C6015
C6014
C6012
*O-Ring Style
Chrome Water Pump Fittings
These fittings are chrome steel for heater hose to the water pump
and manifold. They have a 1/2" pipe thread and are available in
straight design only. Sold individually.
Intake Manifold Fitting
1/2" NPT to 5/8" Barb
C1336
Water Pump Fitting
1/2" NPT to 3/4" Barb
C1335
C1335
C1336
37
“s” blade thermo fans
Part # Description
2000
S-Blade universal electric cooling fans feature a quiet, reversible
(push or pull) S-Style blade. Constructed from lightweight yet
durable glass-filled nylon.
• 12v high performance
• Comes in 12", 14", & 16"
2112
12" thermo Fan S BLADE
2114
14" Thermo Fan S BLADE
2116
16" Thermo Fan S BLADE
2000
Thermo Fan Switch
2001
Electric Fan Install Kit
2112
2116
2114
#2112 Fan Specs
#2114 Fan Specs
#2116 Fan Specs
CFM Pull
1200-1400
CFM Pull
1900-2300
CFM Pull
2400-2700
CFM Push
1350-1550
CFM Push
1500-1800
CFM Push
2200-2500
Dimensions
11 x 12.5 x 2.5"
Dimensions
14 x 14.7 x 3.2"
Dimensions
16 x 16.9 x 3.2"
Amps (push or pull)
5.5 +/- 0.5 Amp
Amps (push)
6.5 +/- 0.5 Amp
Amps (push)
8.5 +/- 0.5 Amp
Volts
12
Amps (pull)
5.5 +/- 0.5 Amp
Amps (pull)
7.5 +/- 0.5 Amp
Volts
12
Volts
12
Radiators
2001
StaInless Steel
Overflow Tank
2" x 15"
8004
2" x 13"
8000
These Overflow tanks are designed using stainless steel
to provide modern good looks and durability. Installing
a new overflow tank will ensure that when your coolant
expands, it will end up safe and not on the street. When
the engine cools, the excess coolant is sucked back into
the tank so no coolant is wasted. Includes mounting brackets.
• Made from aluminum with no epoxy for
high quality radiator at an affordable price
• Comes with a billet neck
• Feature a 2 row 1" core design
• Available in various sizes
8004
8000
38
Part # Description
8027
19x27x2.2 Alum 2 Row
8031
19x31x2.2 Alum 2 Row
8131
19 X31x2.2 Alum 2 Row
8127
19 X27.5x2.2 Alum 2 Row
Add style to your engine with one of CSI’s custom Air Cleaners. Upgrading your Air Filter will increase air flow to your engine,
resulting in better fuel economy and more power. Available in muscle car and race car styles, all Air Cleaners feature a quality, high
flow, multi-weaved paper element and are available in a variety of sizes based on clearance needs. Available in chrome plated steel
or polished aluminum. Replacement filters sold seperately.
Chromed Steel Air Cleaners
Polished aluminum Air Cleaners
Chromed steel provides a high shine that will not tarnish
with time for a high-quality finish and great looks.
Polished aluminum provides the same mirror finish as chrome plating,
while resonating more color, allowing you to see the true metal.
1209
Chrome
ASSEMBLY
REPLACEMENT FILTER
10" x 2"
Muscle Car
1208
1208A
14" x 2-1/8"
Muscle Car
1210
1210A
14" x 3" - Flat Base
Muscle Car
1214
1207A
14" x 3"
Race Car Style
1216
1207A
14" x 3"
Recessed Base
1207
1207A
14" x 5"
Muscle Car
1212
1212A
6-3/8" x 2-1/2"
Muscle Car
1209
1209A
ASSEMBLY
REPLACEMENT FILTER
Polished Aluminum
14" x 3" - Finned
Muscle Car
Triangle
1212
1224
1224
1207A
ASSEMBLY
REPLACEMENT FILTER
14" x 3"
1207A
1222A
1212A
1210A
Studs & wing nuts
The Steel Air Cleaner Stud with wing nut is designed to fit all CSI® Air Cleaners.
Steel will not bend or break, keeping your Air Cleaner in place. The Tri-Bar wing nut
is a great way to dress up your air cleaner and engine compartment.
Black Plastic Risers
Steel A/C Stud & Wing Nut
Tri-Bar A/C Wing Nut
Air Cleaner Risers allows additional clearance between
the carburetor and air cleaner for custom linkage,
competition carburetor return spring kits and modified,
oversized fuel lines, or electric chokes. Made from high
impact plastic for precise fit, strength, and durability.
Kit
C1215
Each
C1205
C1205
C1215
C2380
1-1/2" Riser
Each
C2326
2" Riser
Each
C2380
C2326
39
Replacing your factory air filtration system with a CSI CAI kit will dramatically
increase your vehicle’s performance. CSI’s CAI Kits will also improve fuel economy up
to 4 miles per gallon. CSI’s intake tubes make gradual bends without any restrictions.
Combined with a high-flow air filter the CAI kits are much more efficient at delivering
larger amounts of air to your engine. This gives you seat-of-the-pants feel right off of
idle in the engine’s lower RPM range
Part#
Year
Descriptions
Engine
where you need power most for daily
815253 07-08 GM Truck
V8 Gas
driving and towing. With CSI’s CAI kits, 815353 09-10 GM Truck & SUV V8 Gas
you can save gas or go fast.
815053 99-06 GM Truck
V8 Gas
815066
815966
815866
815166
816857
816759
816867
819754
819860
819864
819873
818857
Features:
• High Grade X-Link
• Polyethylene material
• Polished aluminum lid
• Silicone sleeve
• Marine grade clamps
• Closed box design
• Bolts in factory positions
• Draws air from outside
• Comes ready to install
06-07
04-05
01-04
07-08
03-08
03-07
08-09
04-08
03-07
08-09
99-03
07-10
GM Truck
GM Truck
GM Truck
GM Truck
RAM
RAM
RAM
F150
F250/350
F250/350
F250/350
Tundra
815253
LBZ Duramax
LLY Duramax
LB7 Duramax
LMM Duramax
5.7 Gas
5.9 Diesel
6.7 Diesel
5.4 Gas
6.0 Diesel
6.4 Diesel
7.3 Diesel
5.7 Gas
815166
All CSI® Carburetor Accessories are custom designed. Accessories are made from the finest quality materials to ensure a lasting and
durable product.
Adapters
Increase your horsepower without costly manifold changes.
The Carburetor Adaptor allows for the carburetor to be
properly mounted onto the manifold. Includes all necessary hardware.
Sealing Plate-Square to Spread
C2732
Q-Jet to Square Bore Adapter
C4010
C2732
C4010
Four hole & Open Spacers
Spacers provide a valuable tuning tool by changing the
relationship of the intake manifold and carburetor. Available in
a four hole and an open hole design. Four hole carb spacers
increase the barrel lengths of your carb, which gives you
improved low end response. The open spacers increase the
plenum area under the carburetor. This increased plenum area
improves the air/fuel distribution. Includes all necessary hardware.
4-Hole
Open Hole
1" Height
C4012
C4016
2" Height
C4014
C4018
Stud KitS
The CSI Carburetor Stud Kit provides all of the correct
studs, nuts, and washers necessary to mount your
carburetor correctly. A carburetor stud kit is the best way
to make sure that carburetors stay perfectly sealed to the
intake manifold to insure no leakage.
C4012
C4016
C4014
C4018
®
2" Studs w/Nuts & Washers
C4090
1 3/8" Studs w/Nut & Washers
C4080
C4080
C4090
CHROME Return Spring Bracket
This chrome Carburetor Spring Bracket features a universal design. It
replaces the original carburetor bracket with a high performance look.
SB Chevy V8
40
C5695
C5695
CSI® Fuel Lines
Fuel system accessories are custom designed to fit most fuel systems.
Manufactured using quality materials for long life and durability!
CSI® Fuel Lines are made from chrome plated
tubing. Designed to fit most dual inlet type
carbs. They promote maximum fuel flow to
provide superior performance.
C2050/C2060
Long: 9-5/16"
C2050
Short: 8-21/32"
C2060
Stainless Steel
cable throttle
This Stainless Steel Throttle
Cable Assembly Kit is designed
to fit carbureted vehicles and
1966-93 Ford EFI vehicles.
Housing measures at 24".
Universal Throttle Assembly 24" Housing with Cable
C1622
C1622
Chrome Fuel Pump
Block-Off Plates
Fuel Pump Block-Off Plates allow you to install after
market fuel pumps by simply blocking off the OEM
fuel pump mount. All CSI® Fuel Pump Block-Off
Plates are precision designed for a positive fit, BlockOff Plates feature chrome plating for long life and
great looks. Comes complete with gasket.
Chevy Big Block
C5115
Chevy Small Block
C5116
C5115
C5116
CHROME manifold E.G.R.
Block-off plate
This block-off plate allows you to seal the E.G.R.
passages in your intake manifold for
off-road racing use.
C1722
Small Block Chevy
C1722
41
3212
Anodized Billet fuel
pressure Regulator
Part # 3212
•
•
•
•
Combine the best materials with the finest CNC machining
Provide extremely accurate regulation throughout the delivery range
Adjustable between 3-12 lbs.
3/8npt port
8409
chrome fuel
pressure Regulator
Part # 8409
•
•
•
•
Adjustable between 4-9 lbs.
Perfect for street machines and show cars
Accept 3/8npt for a one in two out design
Two regulators recommended with dual quad setup
electric Fuel pumps
•
•
•
•
Designed For Street/Strip Applications
Externally accessible pressure relief valves
Repair kits are readily available
Not for use with fuel Injection systems
Part # Description
8115
115GPH Electric Fuel Pump
8130
8140
8300
5-7PSI 20GPH Univ Fuel Pump
8300
8130
8115
8140
42
Made from the finest materials available, and precision die cut for an accurate fit, csi’s gaskets have been designed to withstand
tremendous pressures and extreme temperatures. Csi’s gaskets ability to compress helps seals flanges and avoiding re-torqueing.
Available for a variety of applications.
Carb Base gasket
150AX
Precision die cut from 1/16" thick, high temperature synthetic
material. A nitrile rubber binder for excellent sealing
characteristics and feature a non-stick coating on both sides.
collector &
exhaust gasket
•
•
•
150BX
Graphite compound withstanding extreme
heat conditions
Conforms and seals surface irregularities,
providing a solid seal
Resists shrinking and sticking and provides
excellent durability and a leak proof seal
AMC
150X
55X
Exhaust
304/360/390
Carded
Chevy
153X
C851X*
Exhaust
Big Block: Round 1-7/8"
Carded
C152X*
Big Block: Square 1-7/8"
Carded
C153X*
Small Block: Round 1.63"
Carded
C150X*
Small Block: Round 1-1/2"
Carded
C150BX*
Small Block: Square 1-3/8" x 1-1/2" Carded
C150AX*
Ford
Exhaust
332/352/390
Carded
406/427/428
Bulk
Small Block
Carded
mopar
426
Carded
273-340
Carded
*Also available in bulk: simply remove “C” when ordering
351X
54X
Universal
C251X*
Carb Base
252X
1/16" 4BL: Square Flange 4 Hole
Bulk
55X*
C253X*
1/16" 4BL: Square Flange 4 Hole
Carded
57X
Exhaust
1/16" 4BL: Square Flange Open
Carded
54X
C351X*
C358X*
1/16" 4BL Q-Jet
Bulk
56X*
1/16" Q-Jet Open Center
Bulk
56AX*
3 Hole 1/8" x 3"
Bulk
Exhaust
Collector
1204X*
*Also available by adding a “C” for carded.
Exhaust Material
10 X 10"
77X
6 X 24"
77AX
77AX
77X
43
CSI® Glasspacks are an easy way to get
that race sound and performance you
want out of a compact design.
2" Inlet/Outlet
9050
2.25" Inlet/Outlet
9051
2.5" Inlet/Outlet
9052
CSI® Mufflers are 100% welded for maximum durability. Excellent for all racing
classes or any high horsepower street machine. Easy to install. Features a rich deep
performance tone.
Made from 304 Stainless Steel
1 5/8 tubing and welded to a 1/2" laser cut flange for true seal
Coated in chrome that will not chip, fade, rust, or rainbow
Includes stainless steel hardware & gaskets for easy installation
18200
Part #
Description
18000
SS SBC Block Hugger Headers
18100
SS 67-81 Camaro-Chevelle Headers
18200
79-93 5.0 Mustang Shorty Hdr SS
Make adapting headers
to your exhaust system
easier. Sold in pairs.
3"/2.25" with gaskets (Pair)
44
9002
2.25" Offset Inlet/2.25" Center Outlet
9003
9013
3.00" Inlet/2.50" Dual Outlet
9018
9003
9018
•
•
•
•
17000
18100
18000
Clamp-on Exhaust Tips
These brilliantly polished T304 stainless steel exhaust
tips from CSI® are a popular item that is perfect for
trucks and SUVs. They won’t rust, flake, chip, or peel
and are available in a straight and slant-cut design.
A quick and easy way to add instant style to the rear of the vehicle
with simple, easy bolt-on installation that requires no welding.
Weld-On Exhaust Tips
A permanent upgrade for the rear of the vehicle. With
weld-on exhaust tips, there is never the worry that the tip
may become loose or be stolen.
40101
31106
40104
Bolt-on Turn Down Exhaust Tip
31111
50001
Turn down
Bolt-on
Slant Cut Weld-On
Slant Cut Clamp-On
Straight Cut
Weld-On
Straight Cut
Clamp-On
2.25" Inlet x 3.00" Outlet x 8" Length
31101
40101
31102
40102
31103
40103
31104
40104
31106
31105
40105
31111
40111
31107
40107
31109
40109
31115
40110
31120
31117
40117
31122
40121
31124
31121
31119
40119
31123
40123
31110
50001
40120
40122
31118
45
Replaces the factory fuel door with a modern, custom fit fuel
door. Made from a solid, aircraft-grade chrome aluminum,
CSI® Chrome Aluminum Fuel Doors deliver a custom look to
any truck or SUV. Easy to install with no drilling or cutting
necessary, they simply bolt-on in place of the factory fuel
door. Limited lifetime warranty. Also available in black
powder coat.
LOCKING FUEL DOORs
Locking fuel doors are a great way to add some shine to your
vehicle while deterring vandalism, fuel theft, and gas cap
theft. Includes two keys which will open the fuel door with
an easy 1/4 turn.
GMClocking
Cadillac
Escalade
02-UP
Escalade
99-00
Chevy
CHROME
Locking
CHROME
Push-Open
C4096L
C4096
BLACK
Locking
BLACK
Push-Open
C4096B
C4095L
C4095
C4095BL
C4095B
Locking
Push-Open
Locking
Push-Open
C4095BL
C/K Truck
91-98
C4095L
C4095
Suburban
01-UP
C4096L
C4096
C4096B
Trucks
99-UP
C4096L
C4096
C4096B
Silverado
07-09
C4100L
Dodge
Dakota
97-05
C4095B
Locking
Push-Open
Locking
Push-Open
C4098L
C4098
C4098BL
C4098B
C4098BL
C4098B
Push-Open FUEL DOORs
The innovative push-open hinge system eliminates the
need for a lifting flange for a flush, low-profile look.
Spring loaded to pop open with the push of a finger.
Ram 1500
02-UP
C4099L
C4099
Ram 1500
94-01
C4098L
C4098
Ram 2500/3500
03-UP
C4099L
C4099
Ram 2500/3500
94-02
C4098L
C4098
C4098BL
C4098B
Locking
Push-Open
Ford
Locking
Push-Open
F150
97-03
C4097L
C4097
C4097B
F-Series Super Duty
99-UP
C4097L
C4097
C4097B
Super Duty
99-UP
C4097L
C4097
C4097B
GMC
Locking
Push-Open
Trucks
99-06
C4096L
C4096
Yukon/Denali
99-00
C4095L
GM Truck
07-09
C4100L
Jeep
TJ
97-06
Locking
Push-Open
C4095
C4095BL
C4095B
Locking
Push-Open
Locking
Push-Open
C4094L
C4094
Ford
C4096B
C4094B
L = Chrome Locking
BL = Black Locking
No Suffix = Chrome Push-Open B = Black Push-Open
46
GMC-push open
Part #
Description
47

Untitled - CSI Accessories

Transcription

Similar documents

Monster Truck - $4900 (Jackson, Wi)

Fitting a Whiteline Rear Sway Bar to a Ford Fiesta Mk.6 By Chris

Rivnut Installation Instructions

Window Sticker

Bolt Messenger

MotoTec Solar Go-kart Assembly Manual

Anschutz 1727F - RUAG Ammotec UK Ltd

isuzu - Team-BHP

Anschutz 1416 - Rifle Shooter January

Rockingham Dragway