patriot VFD - SHOPMASTER

Transcription

www.shopmasterusa.com
Shopmaster’s Journal
30th Anniversary Special Edition
IN THIS ISSUE:
THE NEW 2013
SHOPMASTER
PATRIOT
VFD
Now with center drive ball screws on X and Y axes for less lash and
more speed. PLUS- 2 HP SPINDLE MOTORS!!!
Introducing the New 2013
SHOPMASTER
patriot VFD
Copyright 1981-2013 Shopmaster’s Journal, Inc.
1-800-343-5775
1
Shopmaster 30th Anniversary
Shopmaster Yearbook 1981-2012
ShopTask 11-14
1981 - 1984
ShopTask 12-22 TC
1989-1991
ShopTask 17-20 BB
1985 - 1989
ShopTask 1720-XMTC
1991-1997
DARE TO COMPARE!!!!
Do the machines at the top of this page look familiar? Of course they do!
That’s because some companies are still selling these old 1980s designs
as their “top of the line” models today! As you follow the evolution of
our 3-in-1 machines, you can easily see that we constantly improve the
design. Our design improvements have always been directly based
on our customers’ input. Don’t get stuck with 1980s technology!
ShopTask 1720-XMTC Gold
1997-2000
80%
DO YOU OWN ONE OF
Shopmaster 2000
2000-2002
Shopmaster ElDorado Bridgemill
2002 - 2005
2
80%
Trade- In
Trade- In
THESE MACHINES?
Value!
Value!
If you are the original owner of any one of our older models, ShopmaSter
will offer you up to 80% credit of the original sales price, regardless of
your machine’s age. The 80% credit value is applied to your order of a
new 2013 ShopmaSter patriot VFD. This is our guarantee that your
machine shop will never become obsolete with a ShopmaSter 3-in-1
Machine. Please contact us for more details certain conditions apply.
SHOPMASTER TRI-POWER
2005-2009
PATRIOT VFD GEAR DRIVE
2009-2010
[email protected]
Why waste your time with
1980’s technology?
Shopmaster Family
2011
ShopTask Family
1984
Hi, I’m John Taylor, President of
ShopmaSter. Here it is, already 2013!
We are celebrating our 32ND year in
the business by introducing the
ShopmaSter patriot VFD machine. As
you read through our new catalog, I
am sure you will be amazed at what
we offer the home machinist, the small business and the
educational institution. Things have certainly changed a lot
since we first introduced our 3-in-1 concept machine to the
marketplace so many years ago. What was once unheard
of, except at our company, has become the standard in the
worldwide industrial marketplace. While researching, you
may have seen other companies that sell various models and
several different sizes of virtually the same machine - one
question you should ask is: “If their machine is so versatile,
why do they need to sell 6 different models?” Only Shopmaster
has maintained the original concept of ONE multi-function
machine that can be used for countless applications that
would normally require 5 or 6 different pieces of machinery.
The Shopmaster still maintains the versatility that allows anyone from novice to professional to have a fully functional,
yet compact machine shop.
WHERE ARE
SHOPMASTERS MADE?
You may be surprised to find out that all 3-in-1 machines are made overseas, particularly in Asia. Our Shopmaster machines are and always have been designed by us, and assembled in a factory we established in mainland China in 1986.
Our factory is Shopmaster exclusive, and builds only our machines and accessories to our stringent specifications. In 2006 we increased our factory size and CNC production capabilities to further enhance our machines. Shopmaster has the exclusive small to midsize CNC machine export designation from China. What that means is that Shopmaster
is the only company to sell a small to midsize 3-in-1 machine which comes CNC ready from the factory. Prior to 1986, our
machines were produced in the more common Chinese state-run factories. This type of factory has no product exclusivity and manufactures products for many companies. As our designs evolved with the industry, we needed to play a more
active part in every aspect of the production of our machines. A few of the items we were concerned with improving upon
were: quality control and inspection, raw materials quality and cost, and design integrity. Overall, we needed the factory
to meet our precise specifications instead of altering our product to correspond to pre-set factory specifications meant
for cheap mass production. The only way that this was possible was to establish our own factory. Being able to actively
control production decisions, we are able to continuously improve our designs,
allowing us to keep up with today’s technology and our customers’ demands. You may see different versions of our
older style machines for sale on the market, even today. Take a look at page 2, and see how many you recognize! You will
never see a Shopmaster product anywhere but here.
1-800-343-5775
3
SHOPMASTER PATRIOT VFD
CNC
IS NOW A
STANDARD FEATURE
ON ALL 4
AXES!!
Standard Accessories with every PATRIOT
A Value
of Over
$4500.00
FREE!!!
DUE TO CHANGES,
PICTURE MAY NOT
BE ACCURATESEE FACING PAGE
FOR FULL LIST
4
[email protected]
Shopmaster offers the Most
Standard Features and gives $4795.05
IN FREE
you $4795.05 inFREE tools! TOOLS!
*Due to ongoing design upgrades, this list is subject to change. Please check our website or call for updated information.
Shopmaster PATRIOT Standard
Every Shopmaster PATRIOT
Accessories that come with every
includes these exciting features*:
machine at no extra cost to you*: 4 axis power feed (horizontal, vertical, crossand mill height)
Steady Rest with Taper ability
Follow Rest
3-Jaw Chuck (5 inch)
Face Plate
Spare Parts Manual
Shop Manual
Compound/Adjustable Toolpost
T-Handle
Allen Wrenches
9pc Open End Wrench Set
MT4-MT3 Sleeve
1/2” Drill Chuck & Key
R-8 Drill Chuck Arbor
MT3 Drill Chuck Arbor
MT4 Center
MT3 Center
R-8 Drawbar
CNC Drive Pulleys
Coolant Drain tray
6 Bench Levelers 2 T-bolts
Mill Lift CNC Motor Mounted
R-8 Collet
3 Turning Tools
3 Highspeed End Mills
4 Handles
6 Leg All Steel Bench CNC Enclosure
3 axis ball screws
4 axis cnc system
$149.95
$149.95
$159.95
$59.95
$19.95
$19.95
$179.95
$7.95
$ 29.95
$29.95
$9.95
$12.95
$12.95
$12.95
$9.95
$9.95
$6.95
$90.65
$99.95
$70.00
$6.95
$269.95
$15.95
$20.85
$20.85
$27.80
$375.00
$119.95
$1199.00
$1595.00
Dual 2 horsepower motors
R-8 Mill Spindle
5 steel supports to stabilize the mill head
Built in DRO mounts on all three axes
All Steel bench with built in drip tray
Adjustable gibs
Carriage locks
Bed wipers
Full floating dials in inch increments
Offsetting tailstock
6.25” stroke on tailstock barrel
C-7 Ball screws with multi-track deflector style ball nuts
Factory installed CNC
Integrated CNC Enclosure
Center drive ball screws on X and Y axes
Bellows shields for ball screws
ISO 9001 Certification
NEW FOR 2013
2 HP SPINDLE MOTORS
CENTER DRIVE X AXIS BALL
SCREW
1-800-343-5775
5
What Can I Do With
B.W.
Ames, IA
N.G.
Santa
Rosa, CA
Noel does a lot of engraving on his 1998
CNC ShopTask machine. He built a special
bracket to attach a highspeed Dremel tool
for all of his super-fine work!
THE POSSIBILITIES ARE ENDLESS WITH A Shopmaster MACHINE!
Bill’s friend had an old lathe with a broken handle.
Parts were no longer available, so Bill made him
this custom replacement!
restoration - prototypes - hobbies - manufacturing - repairs - engraving gunsmithing - clock making -tool and die making - fabrication - jewelry
A.R.
Golden, CO
V.K.
Chippewa
Falls, WI
Alan is a Kart racer and uses his Shopmaster for
all sorts of repairs and modifications. He built this
hub and spacer to allow him to adjust the rear track
width to change the handling of his Kart.
6
Vern used his ShopTask in the construction of this
beautiful 3/4 scale P-51 Mustang. He also restored
this 1941 Ford Pick-Up with the help of his
ShopTask machine.
[email protected]
My New Patriot?
Here are just a few of the many
applications...one is perfect for you!
J.S. Austin, TX
(1993 ShopTask
1720-XMTC)
builds custom .50 caliber target rifles
and is the successful author of this
popular book on rebarreling.
To order his book, ask for
ST39 Volume 13
$24.95
WHAT IF I’M NOT SURE, DO YOU OFFER ANY TRIAL PERIOD?
Shopmaster has always been the only company to “screen” its potential buyers. Our focus is not to sell a new
machine to every customer who dials our toll free number. We take time to discuss your projects. If we feel that
our machine is too large or too small or just not the right style, we will actually offer advice on some of the other
products on the market that may better suit your needs. If, however, we both decide that a Shopmaster Patriot is
the machine for you, we’d like you to have plenty of time to really get in there and try out some of your work. We
have always offered our ONE YEAR TRIAL PERIOD, a full 12 months from the time you receive your machine,
not from the day you place your order (like some other companies). Why so long? We have been in business for
30 years and have learned that some of our customers have only a few hours each week to use their machines.
Other customers may be beginners and need some time to develop their skills. Every customer will experience at
least a slight learning-curve, as it goes with any new piece of equipment. Those “30 Day” trial offers are just not
long enough. Even a machinist who has plenty of experience on different machinery knows that it takes some time
to learn the different functions of a new machine, and some more time to work with applying those functions to his
projects. For a novice, 30 Days is just far too little time to learn machine work, even if that person devoted all their
time to learning! We invite you to buy with confidence and take your time to really get to know your new Shopmaster
Patriot and experiment with all of its numerous applications.
1-800-343-5775
7
ST 1, 2, 3: $6.95ea
Carbide Tipped
Lathe Cutting Tools
(please specify)
st 1 br
ST 1 (Center)
$6.95
ST1 BR (Right to Left) $6.95
ST 2 (Left)
$6.95
ST 2 BL (Left to Right) $6.95
ST3 (Right)
$6.95
ST 7C: $7.95
MT3-MT2 Taper Sleeve
ST 4, 5, 6 $6.95 ea
Highspeed Endmills
ST 89: $89.95
Indexable Carbide Lathe
Tool Set (5 pcs)
(please specify)t1
ST 4 (1/2”) $6.95
ST 5 (9/16”) $6.95
ST 6 (5/8”) $6.95
ST 19: $12.95
12” Drawbar
for R-8 Collets
ST 128: $349.95
15 piece ER collet set
Available in R-8 or MT 3 shank
st2
Comes with 5 Holders, 5 Carbides,
ST 89a $4.95ea
replacement blades
ST 125s: $129.95
R-8 Collet Set (11pc)
Includes sizes:1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,
9/16, 5/8, 11/16, 3/4
Buy The Full Set and SAVE $45.50!
ST 9 Individual R-8 Collets
$15.95ea
(please specify size)
ST 40 $99.95:
Live Center Set
ST 35: $29.95
Single Point Live Center
st5
The set includes15 collets from 1/16” to 1” in 1/16” increments,
a special collet chuck and wrench for quick changing of the
various sizes. The set comes in a fitted plastic case with manual.
ER collets are available from many sources in other sizes as well as metric.
8
includes: holder, tool and 7
interchangable tips
ST 30: $11.95
Half Center
[email protected]
ST 58 $89.95
Digital Calipers:
C (also
a available
l i inpdialestyle)r
s
ST 69 $119.95
Digital Micrometer
Order the ST65 set to
save Money
Digital Calipers and Digital Micrometer
come as a set
ST 65: Digital Caliper & Micrometer
Set $199.95
:
maintain accuracy of inside and outside measurements
ST 58 (Digital) $89.95 (inch and metric)
ST 57 (Dial) $29.95 (inch only)
ST 61 $49.95 Measuring Set
digital style measures down to .0001”
ST 69 Digital Micrometer
ST 70 Micrometer (0-1”)
$119.95
$ 29.95
Gauge Sets:
ST 59 $34.95
Dial Indicator Position and
align your work in the same place
every time! ST 63
$6.95
includes steel rule, caliper and 0-1” microm-
ST102 $9.95
Small Hole
Gauge Set
ST 88 $5.95
Pocket Drill Gauge
ST 59 Dial Indicator
$34.95
(comes with magnetic stand)
ST 67 Dial Indicator (only) $18.95
ST 52 Magnetic Stand (only) $18.95
ST 26
$4.95
Screw Pitch Gauge Set
ST 62 $25.95
6 pc Telescoping Gauge Set
measure inside diameters from 5/16” to 6”
ST 60: $49.95
Micrometer Set
(please specify inch or metric)
ST 88m Metric Drill Gauge
ST 88i Inch Drill Gauge
ST 129 $9.95
Radius Gauges
$5.95
$5.95
Includes: 0-1”, 1-2” and 2-3”
* 1-2” and 2-3” sizes not available individually.
1-800-343-5775
9
ST 127 $29.95
2” Travel Dial Indicator
ST 113 $14.95
6” Protractor and Depth Gauge
ST 91 6” SPLIT VISE 179.95
ST 29 6 PIECE
LATHE TOOL KIT
49.95
ST 116 $14.95
Mity Midget Magnetic Base
ST 18 $12.95 T-Nut Set
K.G. Oregon
Karl learned machine work in Austria
before WWII. Now retired, he does
volunteer projects for the local high
school on his Shopmaster. This water
wheel has a 16” diameter and is 7”
thick. Only a Shopmaster can handle a
job of this size!
10
[email protected]
ST 71 $29.95
Transfer Punch Set
ST 72 $14.95
Alpha-Numeric Punch Set
ST 75 $29.95
Set of Machinists’ Squares
ST 73 $ 19.95
Center/Edge Finder Set
ST 76 $12.95
Layout Fluid (blue)
ST 74 $69.95
Deluxe Measurement Set
comes with 3 sizes
comes with protective case
(please specify Spray or Felt type)
ST 76s Layout Fluid (spray)
ST 76f Layout Fluid (felt)
$12.95
$12.95
C.M. Hampton, VA
Charlie builds custom racing carbs for all
types of motors. He begins with unfinished
castings and creates his own prized products.
His products help guys win races. His
ShopTask machine has been serving him
faithfully since 1992 and has paid for itself
countless times over.
1-800-343-5775
11
ST 51: Rotary Table
Can be upgraded to ST 32
CNC Driven Rotary Table!
ST 51: Rotary Table
ST 51D: Dividing Plate Set
ST 32: CNC Driven Rotary Table
$249.95
$49.95
$499.95
(ST 32 requires CNC System- sold separately.)
ST 28 $89.95
Expanding Mandrel Set
ST 23 $39.95
Angle Plate
12
ST 14 $99.95:
6” 4-Jaw Chuck
ST 24 $89.95:
Tilting Table
ST 137 $99.95
4 Position Tailstock Turret
ST 10 $21.95
Flycutter Set
Charles loves to fix or build anything! He used his 1999
ShopTask to create this unique steam engine model
entirely from rare hardwoods!
C.S. Silt, CO
[email protected]
ST 17 $14.95
ST 122 $14.95
ST 16 $19.95
M2-M2 Taper Extension Countersink/Deburring Set
M3-M3 Taper Extension
ST 11 $39.95
Lathe Boring Tool
ST 38 $139.95
2” Boring Head with Carbide Bits
ST 109 $19.95
Carbide Deburring
Tool
ST11a Spare Carbides $4.95ea
ST 34 $39.95
Scissors-Head Knurling Tool
M.K. Tacoma, WA
Manfred used a Shopmaster
Bridgemill in the restoration of
this rare Marchetti SP260 Sport
plane. The plane has won numerous awards and has appeared on the cover of
prestigious magazines!
1-800-343-5775
13
ST21 $79.95
51 Piece Tap and Die Set
INCH AND METRIC COMBO
ST 77 $19.95
25 Piece Drill Set
(metric)
Please order ST 21m if your prefer Metric
ST 83 $69.95:
ST 81 $29.95 RachKeyless Drill Chuck
eting Tap Holder
ST 82 $12.95
Tapping Fluid
ST 80 $49.95
8pc Step-Shank Drill
Set
ST 84S $9.95
4 piece Countersink Set
ST 114 $17.95
Floating Die Holder Set
Dick is on his 3rd Shopmaster machine. He bought the
first one in 1994, then traded up in 1997, and again
traded up to a Bridgemill model in 2003. He built this
custom lift motor for his Bridgemill machine: the
castings, gears, shafts, etc. all himself.
D.M.
St. George, UT
ST 42 $24.95
V-Blocks
with Clamps
14
ST 50 $14.95
3” Cast Iron
V-Block Set
[email protected]
ST 33 $79.95
50 Piece Clamping Set
ST 48 $99.95 Precision
3” Toolmaker’s Vise
ST 90 $149.95
4” Swivel “Palmgren” style Vise
ST 45 $24.95
1-2-3 Step Block Set
ST 41 $79.95
Adjustable Angle Block
ST 105 $14.95
Slitting Saw Arbor
ST 46 $89.95
Parallel Set
ST 128 15 PIECE
ER COLLET SET
349.95
ST 123 $29.95
Carbide Tool Set
4 pair with case
ST 44 $21.95
5” Sine Bar
4” and 6” sizes
ST 107 $19.95
Floating T-Handle Set
REPLACEMENTS
FOR ST38 BORING
1-800-343-5775
15
ST 95 $79.95
14 Piece Chucking
Reamer Set
1/8-1/2” .001” OVER/UNDER
ST 97 $149.95
29 PIECE REAMER
SET
ST 120 $249.95
640oz/in Stepper Motor
1/16-1/2 BY 1/16THS EXACT SIZE
comes with hardware
Shopmaster Advanced Machining Upgrades
ST130: Shopmaster Pro-Line DRO regular price $899.00
(see page 17 for more information)
sale price
$849.00
30th Anniversary PRICE $799.00
ST108: 3 Axis Ball Screw Assembly
regular price $1199.00
(see page 20 for more information)
Now FREE!!! on every PATRIOT VFD
P.R. Racing
Ontario, Canada
WHAT IS BETTER -
A PATRIOT VFD
or a separate lathe and mill?
This is one of the most commonly asked questions. Some people feel that
separate machines are better because of reduced set-up times. In some cases,
such as commercial shops with several operators earning $30 - $40 per hour,
separate machines may indeed be more practical. However, for most small
shops, home shops, schools, and hobbyists, the Patriot VFD combination
machine offers real advantages in space-saving and a lower total purchase
price. A common oversight of the “separates is better” guys is the long term:
Upgrading each individual piece of equipment with digital read-out, ball screw
This start-up company was
assemblies, and CNC options becomes very costly, as well as taking double
spending thousands on machine the time to install, not to mention multiple coolant systems, benches, and sevwork for their carbon fiber brakes eral sets of duplicate tools. With the Shopmaster Patriot, all of our advanced
and special flywheels. Now they upgrades operate on all 3 axes and are installed at the time you purchase
build all the prototypes on a Shop- your machine for no extra charge. Overall, the better choice is CLEARLY to
master and even produce short
purchase ONE Shopmaster PATRIOT .
production runs!
16
[email protected]
Shopmaster Advanced Machining Upgrades:
THE Pro-Line DRO
STOP SQUINTING!!
The Shopmaster Pro-Line DRO has a bright
LED display
No loss of position - this DRO can remain
on permanently, displaying your last position until you return. Automatic back-up
memory saves your last position even if
there is a power failure!
ST 130: Shopmaster Pro-Line DRO
(Digital Read-out)
$799.00*Installed on your patriot machine
For a limited time only! (Regular retail price $899)
* offer available only to customers purchasing a new Patriot
see special on back cover
THE PURPOSE OF DIGITAL READ-OUT
DRO stands for Digital Read Out. It is a system designed to eliminate machinist errors and increase effciency. On
the SHOPMASTER PATRIOT each of the three axes has a drive handle and a dial dividrd into 0.001” increments.
Therefore 1 complete turn of the handle is 0.200” in motion (1 fifth of 1 inch, or 200 thousandths). In other words, if
you turn the handle 5 complete turns, you will have a motion of 1.00” (one inch). This method of measuring allows
the operator to count turns of the handle for general postioniong, and to use the dial marks for precise measurements, or “fine tuning”. The SHOPMASTER offers an exclusive feature not found elsewhere: each dial is free floating so that the operator can move the dial to zero at any time before beginnning to count. Because all machines
have some inherent backlash, the operator will move the screw in the direction of the cut, take out the last, and
then set the dial to zero. For an experienced machinist, thesr things are second nature. For a beginner, this concept can be quite rattling and cause some mistakes. Some of the old-fashioned 1980s style machines use metric
leadscrews and dials with odd-numbered measurement sequences. For the beginning machinist, especially, the
handle turn count method makes measuring accurately a real challenge. The DRO system eliminates this type
of error and reduces the learning curve. Our backlash, the DRO display tells you the exact amount of motion to
a resoloution of 0.0004” (4 ten-thousandths of an inch). Plus, if you need to step away from the machine, for any
reason (for example, the phone rings), your exact position is on the display when you return. Often, when using
the handle turn count method, being even a little distracted or interrupted often results in forgetting exactly how
many turns you have made. Our DRO has many functions to help your machining skills, such as diameter scaling
for lathe work and multiple bolt hole programming for milling/drilling projects. The SHOPMASTER PRO-LINE DRO uses
the most advanced measuring system in the industry. Housed in heavy aluminium extrusions with neoprene seals
and shielded from chips and fluids our system is virtually error-free. Our cables are flex-metal shielded with screw
on connections. Our system is similar to those used in production shops on $500,000.00 machines. Other 3-in-1
companies sell magnetic scale systems which can fail if used with liquid coolants, or low-tech systems that use mechanical racks and gears to turn encoders leaving the system vulnerable to errors from machine vibration and they
use telephone cables which are subject to melting by hot chips and errors in the connectors. SHOPMASTER tested
both these systems extensively before rejecting them in favor or our professional DRO. Those “other companies”
sell you a low-tech “kit” and tell you to hacksaw the scales to fit, then to spend frustrating hours drilling and tapping
holes to match the kit to your machine, which usually leaves an unprofessional look. Some even have the gall to
charge you hundreds of extra dollars for a “special mounting kit”. Your SHOPMASTER machine has been designed
from ground up to accept the DRO system. All holes are drilled an tapped, the drive plates and shields are included
with your standard machine-factory made and painted to match. If your order DRO with your machine as a part of
the initial purchase, we install it before shipping. If you decided to upgrade to DRO1, 2 or 10 years from now, it will
just be a pleasurable hour or so to bolt the system to your machine. If you want professsionial results, SHOPMASTER
is your only choice.
1-800-343-5775
17
Shopmaster Advanced Machining Upgrades: Fully Integrated CNC
Shopmaster has been the leader in CNC for
home shop and education for 25 years. Our first
CNC machine, the ShopTask Compu-Drive, built
in 1986 was revolutionary for its time in form
and function. Since then we have continuously
upgraded not only the machine itself, but the
CNC hardware and software. As a result of these
efforts, we have been able to produce the first
and ONLY fully-integrated CNC system available
in our class, at the LOWEST PRICE. Other companies claim to have “integral systems”, however
these add-on boxes just sit on your bench, and
you are still required to spend more money to
buy the motors, mounting brackets, etc. Not
only does it end up costing hundreds more than
the “advertised price”, but as these units often
replace the original handwheels, it renders all
your manual functions useless. The Shopmaster fully-integrated CNC uses controls that are
truly integral. In fact, every Shopmaster comes
from the factory with our custom enclosure built
into the standard design of the machine that is
designed to allow the user to retain all manual
functions. It is even possible to add this system
on to one of our older models!
1986
1986 Compu-Drive CNC Machine
WHAT IS CNC?
CNC is the abbreviated version of “Computer Numerical
Control.” CNC allows the user to do machine work via
instructions given to an IBM compatible computer. The
user tells the computer, the computer tells the machine,
and the machine performs the task. Projects can be
designed with industry standard G and M codes, or files
may be imported from most CAD-CAM software via the
DXF translator.
SHOPMASTER
FULLY INTEGRATED CNC SYSTEM
ST98CI4
CNC System for Windows
3.5 AMP 4 AXIS STEPPER SYSTEM
INSTALLED ON EVERY PATRIOT VFD
2013
Shopmaster has selected this CNC system
to match the machine size and power of
our spindle motors. In this way, both the
machine and CNC can be utilized to their
full capacity without overworking either
component.
Depending on the material being worked,
the machine will operate under load at
20 IPM ( inches per minute) and can run
at 60 IPM for rapid traverse moves.
18
[email protected]
Actual Screen Image of ST98CI with Mach3 software
One of the most frequently asked questions is:
STEPPER vs SERVO?
One of the most commonly asked questions regarding CNC operations is, “What’s the difference between Stepper
and Servo systems, and which is better?”
A lot of people make the common mistake of assuming the more expensive of the options must be the best option.
The actual answer to which is the better system depends on the machinist’s skill level as well as the nature of the
project at hand. Each system has advantages over the other depending on the project and user...
Stepper systems are best for less experienced operators because of the “fool-proof” nature of stepper motors. They
are able to tolerate a lot of errors without suffering any major damage. A stepper system when properly setup can
produce results equal to those produced with a Servo system, just using lower feed rates. On a Shopmaster Patriot
machine the parameters will be in the 6-20 IPM (inches per minute) range. In some cases, a stepper system can
stall and lose steps causing some error in your work for several possible reasons: dull tools, too high of a feed rate,
hard spots in the material, etc. For this reason we suggest you always perform some test cuts on various materials
and find the stall point, then set your feed rate at about 75% of this. Once you learn your machine’s parameters for
various materials, a stepper system will produce excellent results time and again.
A Servo system operates with a DC motor with an encoder that counts and compares signals from your computer.
Therefore, if the Servo encounters resistance, it will continue to drive until the encoder tells the computer it has
gone the entire specified distance. Because the Servo can run at higher feed rates (up to 60 IPM), errors in tool
choice, feed rates, etc may cause extensive damage to the system. For this reason, we do not offer servo systems
for our machine.
1-800-343-5775
19
GOOD NEWS!!
BALL SCREWS ARE NOW
STANDARD ON ALL MACHINES
What are Ball Screws?
SUPPORTED G-CODES CHART
G0
RAPID POSITIONING
G1
LINEAR INTERPOLATION
G2
CLOCKWISE CIRCULAR/HELIACAL INTERPOLATION
G3
COUNTER-CLOCKWISE CIRCULAR/HELIACAL INTERPOLATION
G4
DWELL
G10
COORIDNATE SYSTEM ORIGIN SETTING
Most machine tools operate with Acme thread lead
screws and nuts. Acme is a special square form screw
which has a long wearing life and generates good force
for moving objects. Acme threads generally have an
inherent backlash of about 0.004 - 0.010” (four to ten
thousandths of one inch). This backlash is necessary
for the screw to move freely inside the nut.
G12
CLOCKWISE CIRCULAR POCKET
G13
COUNTER-CLOCKWISE CIRCULAR POCKET
G15/G16
POLAR COORDINATE MOVES IN G0 AND G1
G17
XY PLANE SELECT
G18
XZ PLANE SELECT
G19
YZ PLANE SELECT
G20/G21
INCH/MILLIMETER UNIT
G28
RETURN HOME
G28.1
REFERENCE AXIS
A ball screw is a special screw with rounded grooves
and utilizes a nut which contains re-circulating ball
bearings which ride in the grooves of the screw. The
ball screw assembly generally has less inherent
backlash than the Acme screw (0.001 - 0.002”), but
its main advantage is the extemely low friction which
allows your CNC to run at higher feed rates. A ball
screw cannot be made in as fine of thread pitch as an
Acme screw. Most Acme screws are 10 TPI (threads
per inch), while the ball screw is just 5 TPI. The cutting force generated by each system is about the same
because the Acme screw has double the mechanical
leverage. However, the ball screw can generate much
greater speeds during rapid transverse moves, considerably reducing the overall program time.
The Shopmaster ball screws are grade C-7 with multi
track deflector ball nuts for anti backlash and are
20MM diameter on x and y axes for zero flex. The z
axis is 16mm.
G30
RETURN HOME
G31
STRAIGHT PROBE
G40
CANCEL CUTTER RADIUS COMPENSATION
G41/G42
START CUTTER RADIUS COMPENSATION LEFT/RIGHT
G43
APPLY TOOL LENGTH OFFSET (PLUS)
G49
CANCEL TOOL LENGTH OFFSET
G50
RESET ALL SCALE FACTORS TO 1.0
G51
SET AXIS DATA INPUT SCALE FACTORS
G52
TEMPORARY COORDINATE SYSTEM OFFSETS
G53
MOVE IN ABSOLUTE MACHINE COORDINATE SYSTEM
G54
USE FIXTURE OFFSET 1
G55
G56
G57
G58
G59
G61/G64
EXACT STOP/CONSTANT VELOCITY MODE
G73
CANNED CYCLE - PECK DRILLING
G80
CANCEL MOTION CYCLE (INCLUDING CANNED CYCLES)
G81
CANNED CYCLE - DRILLING
G82
CANNED CYCLE - DRILLING WITH DWELL
G83
CANNED CYCLE - PECK DRILLING
G84
CANNED CYCLE - RIGHT HAND RIGID TAPPING
G85
CANNED CYCLE - BORING, NO DWELL, FEED OUT
G86
CANNED CYCLE - BORING, SPINDLE STOP, RAPID OUT
G88
CANNED CYCLE - BORING, SPINDLE STOP, MANUAL OUT
G89
CANNED CYCLE - BORING, DWELL, FEED OUT
G90
ABSOLUTE DISTANCE MODE
G91
INCREMENTAL DISTANCE MODE
G92
OFFSET COORDINATES AND SET PARAMETERS
G92.x
CANCEL G92, ETC
G93
INVERSE TIME FEED MODE
G94
FEED PER MINUTE MODE
G95
FEED PER REV MODE
G98
INITIAL LEVEL RETURN AFTER CANNED CYCLES
G99
R-POINT LEVEL RETURN AFTER CANNED CYCLES
20
[email protected]
ST 39A
$599.95
ST159
$149.95
SHOPMASTER
MACHINISTS’ REFERENCE
COMPLETE LIBRARY BOOK PACKAGE (SAVE $29.75!)
27 Books written by machinists for machinists each volume treats a specific task.
Order the entire library for your collection, or
just those volumes that you desire.
BEST VALUE!
ST 39a ShopmaSTer Complete Library
(26 Volumes) reg. $703.65
$599.95 You Save $203.70!!
This 6 volume package
of books is a perfect
choice for machinists
who need a set of general reference books for
their shop.
The Package Includes:
Vol. 3: Screwcutting
Vol. 5: Milling in the Lathe
ST 39 (by volume number)
Vol. 24: Machinists’ Pocket (When Ordering, please specify by volume
Reference
number and title)
Vol. 28: Machine Shop Essentials
Each Volume
$24.95
Vol. 34: Lathe Work Course
except Volume 28 Machine Shop Essentials$49.95
and Volume 24 Machinists’ Pocket Reference $29.95 Vol 35: Milling Course
Volume 1
Volume 3
Volume 4
Volume 5
Volume 6
Volume 7
Volume 8
Volume 9 Volume 10
Volume 11
Volume 12
Volume 13
Volume 14
Hardening & Heat Treating
Screwcutting in the Lathe
Foundry Work For Amateurs
Milling Operations In The Lathe
Measuring & Marking Metal
Art of Welding
Sheet Metal Work
Soldering & Brazing
Saws and Sawing
Electroplating
Drills, Taps & Dies
Gunsmithing
Small Workshop Tools
Volume 16
Volume 17
Volume 18
Volume 19
Volume 20
Volume 24
Volume 27
Volume 28
Volume 29
Volume 30
Volume 33
Volume 34
Volume 35
Volume 37
Electric Motors
Gears And Gearcutting
Basic Benchwork
Spring Design & Manufacture
Metalwork Hints & Tips
Machinists’ Pocket Reference ($29.95)
Spindles
Machine Shop Essentials ($49.95)
CAD Drawing
Workshop Materials
Clock Making
Lathe Work - A Complete Course
Milling - A Complete Course
Dividing
* Boldface type Indicates Our Best Sellers!!!
1989-2010 ShopTask/Shopmaster
Owners Manuals are available....$19.95ea
Each manual includes a complete parts breakdown with line
drawing detail and part number reference. Helpful for ordering
spare parts!
1-800-343-5775
21
Feature to Feature, Shopmaster offers the most for your money.
HOW TO DECIDE IF A
3-IN-1 COMBINATION
MACHINE IS RIGHT
FOR YOU:
I Use a lathe, milling machine and drill press
on a regular basis.
I would like to either consolidate my tools or
reduce the size of my workshop.
I am interested or already have a small business, and would like to do my own production.
I am interested in CNC machine work, and
would like the best machine
available for an affordable price.
Only Shopmaster will
offer a warranty on a
reconditioned*
machine...
Shopmaster
OFFERS A 3 YEAR WARRANTY!
Shopmaster has always been the leader in customer warranty. We introduced
the standard 2-year warranty years before any other company even offered a
Shopmaster offers an Exclusive ma6-month warranty on their machine. No other company has enough confidence
chine trade-in program for customin their product, regardless of price to match our warranty options. We are so
ers who have purchased an older
confident in our new Patriot machine, that we are increasing the standard warmodel, and would like to trade it in
ranty to a full 3 years! We also offer every Shopmaster customer a standard
for a Patriot. (page 2)
full 12-month trial period (see page 7 for details).
That customer’s older style machine, regardless of year or model
is then cleaned up and fully reconditioned here at the shop. When put
up for resale at a discounted price,
we are so confident in the original
machine and the workmanship in
the reconditioning process, that
we offer a standard 1 year limited
warranty!
* Trade-in offer only valid for the original
purchaser as noted on the invoice. Warranty is only valid for machines that have
been reconditioned at Shopmaster. Not all
trade-in machines will be made available for
resale. Please call for details.
22
Does the warranty cover freight damage, or do I
need to purchase additional “Freight Insurance”?
Anything labeled “Freight Insurance” is yet another way that some companies
try to empty your pockets.
All reputable shipping companies offer reimbursement for cargo that has
been damaged while in their posession. Because of this policy, we find no
logical reason that our customer need shell out extra cash for “insurance”.
When you order a machine from us, we include a “receiving checklist” to help
you spot any damage and what to do if there is. Once the freight company
has been notified, just call us and we’ll send you any item that needs to
be replaced -free of charge!
[email protected]
Shopmaster Tri-Power Patriot
TECHNICAL SPECIFICATIONS
LATHE
Swing Over Bed
17 inches
7.25 inches
10 inches
Swing Over Cross Table
Cross Slide Travel
Lathe Power Feed:
Left-Right
Front-Back
Distance Between Centers
YES
YES
30 inches
Spindle Taper
Spindle Bore
Tailstock Taper
Tailstock Barrel Travel
Spindle Speeds
Chuck
Faceplate
Motor
MT 4
1.125 inches
MT 3
6.25 inches
0-2400)
5 inch 3-Jaw
8 inches 2
2 HP
MILL/DRILL
Mill Spindle Throw (center to column)
Quill Stroke
Quill Powered UP and DOWN
Quill to Table (ADJUSTABLE)
Mill Table Size
Mill Table Travel
Mill Table Powered:
Left-Right
Forward-Reverse
Spindle Taper
Spindle Speeds
ELECTRICAL
SPECIFICATIONS
Motors Voltage
Amps
Cycles
RPM
Design
Thermal Protection
Mounting Frame
Shaft Size
Bearings
Required Operating Circuit
2
220 input 380 output
6.5
50/60 hz
1400
3 PHASE / TEFC / Fan Cooled
YES
M400
24mm / 15/16
Sealed Roller
20 AMP 220 volt single phase
CRATE/SHIPPING
Shipping Weight
Crate Height
Crate Depth
Crate Length
Crate
Lifting Points
Forklift / Pallet Jack
900 pounds
44 inches
32 inches
62 inches
Wood crate with steel inner frame
YES- marked on crate
YES- 3 inch skids under crate
18 inches
4.00 inches
YES
4-13 inches
9 x 19 inches
10 x 23 inches
YES
YES
R-8
0-2400
FAQs
frequently asked questions
Once I get my crate home, what is the best
way to un load the machine?
We recommend using an engine hoist or
“Cherry-Picker” type lifting device to move the
crate from your truck or trailer to your shop
floor. (Tool rental agencies usually offer an
inexpensive half-day rental).
I live in a community that has rules about
excess noise, how loud is the Patriot?
Your lawnmower is probably much louder, in
fact, the Shopmaster Patriot is not much louder
than an average washer or dryer.
Do I have to modify my electrical panel?
No, one ShopmaSter patriot motor pulls 6.5
amps (about the same as a hairdryer). It plugs
into a standard (220 volt) household outlet
which has a capacity of about 20 amps.
What are the 4-Axes?
The four standard axes are X(left to right),Y(front
to back) ,Z (quill up and down) and A The A
axis moves the entire mill head up and down
for tool changes or for longer travel. It can also
be used for the CNC rotary table.
1-800-343-5775
23
YOUR SHOPMASTER IS A COMPLETE MACHINING
CENTER IN ONE COMPACT SPACE.
IN THE LATHE YOU CAN BORE CYLINDERS, FACE DISCS AND THREAD SHAFTS
THE MILL HEAD IS ADJUSTABLE UP AND DOWN FROM 4-13” LEFT RIGHT TRAVEL IS 23”
YOU CAN MILL A WORKPIECE ON THE TABLE OR HELD IN A VISE. THE BUILT IN STEADY REST
ALLOWS THREADING OF LONG SHAFTS SUCH AS SPINDLES OR GUN BARRELLS.
The SHOPMASTER is the only truly complete home machining on the market with full manual and
CNC capability. Buying separate CNC machines with equal capacity would cost many times the
price of the Shopmaster Patriot VFD.
24
[email protected]
WORKSHOP LATHE TOOL PACKAGE ITEM# ST 147 $179.95
SHOPMASTER
BUILT IN VALUE
Your New Shopmaster Patriot already
comes standard with these commonly used
tools for Lathe Work a retail value of
$ 240.75!
Faceplate, 3 Carbide Lathe Cutting Tools (right, left
and center), 3-Jaw Chuck, and Chuck Key
Add this for the best set ever
WORKSHOP LATHE PACKAGE
The tools in the Workshop Lathe Package are right at the top of the
“wants lists” of all of our customers! The tools in this package will
enhance your lathe capabilities and give you those desired close
tolerance finishes. We have combined them for you, and given you
a special 30th Anniversary discount! Once again, Shopmaster offers
more tools for lower prices than those “other guys”.
Includes:
ST 14 6 inch 4-Jaw Chuck
$99.95
ST 11 Indexable Carbide Boring Bar
$39.95
ST 35 MT3 Live Center
$29.95
ST 26 Screw Pitch Gauge Set
$ 4.95
ST 39 LatheWorkComplete Course(vol 34)$24.95
Value including standard tools
440.50
PRECISION MILLING PACKAGE ITEM# ST 148
$149.95
SHOPMASTER
BUILT IN VALUE
Your New Shopmaster Patriot already comes
standard with these high-demand Milling
Tools a retail value of 43.75
1/2” Collet, 3 High Speed End Mills, and T-bolts
Add our
PRECISION MILLING PACKAGE
for the most versatile set anywhere
Includes:
ST 33 50-piece Clamping Set
ST 42 V-Blocks with Clamps
ST 10 3-piece Flycutter Set
ST 39 Milling Complete Course (vol 35)
Retail Value including standard tools
195.55
$79.95
$24.95
$21.95
$24.95
When milling, not all work pieces will fit into a standard vise; oddshaped and round pieces require special holders. We solved this problem by creating this tool package that includes a 50 piece clamp set, as
well as a pair of V-blocks with clamps. This will surely keep you working
on those special projects! Shopmaster enjoys giving you DOUBLE THE
VALUE of those “other guys”.
1-800-343-5775
25
LATHE TURNING PACKAGE ITEM# ST 149
$229.95
SHOPMASTER
BUILT IN VALUE
comes standard with these specialty
tools for Turning - a retail value of over
$ 339.90!
Compound Tool Post, Parting Tool Holder (for your
Compound), Parting Tool Blade, and 3-Jaw Chuck
Add The:
LATHE TURNING PACKAGE
For all of your Turning needs
Includes:
ST 89 5pc Indexable Carbide Turning Set $89.95
ST 40 7pc Live Centers Set
$99.95
ST 34 Scissors Style Knurling Tool
$39.95
ST 39 Lathe Work Book(vol 34)
$24.95
Retail Value If Purchased Separately
$254.80
Once you have mastered the basics of turning pieces on your
Shopmaster machine, you may decide to try more complex projects and
closer tolerance work. These tools are specifically selected for quality
and versatility, and combined into one convenient package that is so
“wallet-friendly”, it beats the “other guys’” prices by hundreds!
ADVANCED SET-UP PACKAGE ITEM# ST 150
$199.95
SHOPMASTER
BUILT IN VALUE
comes standard with a 1.125” spindle bore
and 32” center distance
Add the
ADVANCED SET-UP PACKAGE
for your advanced set-up work
For the advanced machinist and gunsmith, the initial setup plays a
major role in determining the final result. Whenever high precision is
required, this set of special tools will allow you to achieve the results
of a master machinist.
Includes:
ST 45 1-2-3 Step Blocks
ST 42 V-Blocks with Clamps
ST 44 5 inch Sine Bar
ST 46 Parallel Set
ST 47 Angle Blocks
Retail Value If Sold Separately
$231.75
30th Anniversary Special Price
$24.95
$24.95
$21.95
$89.95
$69.95
ONLY $199.95
Q: I bought a 3-in-1 from an estate sale. I’m not sure of the year or model or even if it is a genuine ShopmaSter machine. Can I still get
spare parts and tools?
A: We always recommend ordering an Owner’s Manual (we still have manuals for the “late-models”- see page 21). The detailed partsbreakdown section is the best reference for making an inventory of spare parts you need. Most of our accesories are compatible with our
older models, and most can even be upgraded to full CNC, as our machines have been CNC ready since 1990. Please call or send us
an e-mail with your questions!
26
[email protected]
ENGINE BUILDERS’ PACKAGE ITEM# ST 151
$279.95
SHOPMASTER
BUILT IN VALUE
comes standard with power downfeed for
the mill head
Add the
ENGINE BUILDERS’ PACKAGE
for all your engine work
Includes:
ST 59 Dial Indicator and Magnetic Base $34.95
ST 38 2” Boring Head with R-8
Shank and Carbide Bits
$139.95
ST 62 6pc Telescoping Gauges
$25.95
ST 109 Carbide De-burring Tool
$19.95
ST 102 Small Hole Gauge Set
$9.95
ST 73 Center/Edge Finder Set
$19.95
ST 60 3pc Micrometer Set
(0-1”, 1-2”, 2-3”)
$49.95
ST 63 Feeler Gauge Set
$6.95
ST 10 Flycutter Set
$21.95
Retail Value If Sold Seperately
$329.55
30th Anniversary Price
ONLY $279.95
If you are making anything on a lathe and/or a mill, you need
some way of measuring your results. This top quality set of
tools will handle almost every imaginable measuring task!
Don’t forget to join our free online users’
group - share projects, advice, tips &
tricks with other Shopmaster machinists
www.shoptask.com
ADVANCED WORK HOLDING PACKAGE ITEM# ST 152
$349.95
SHOPMASTER BUILT
IN VALUE
Your new Shopmaster
Patriot already comes with Tbolts, and an 9x19 Mill table
For the ultimate set-up,
order this package of
high quality holding
tools:
Specialized work requires specialized tools. This is especially true for “holding”. While the standard 4.5” vise that
is included with your Shopmaster Patriot is an excellent
all-purpose tool, your projects may require more advanced holding devices that allow for greater versatility
and precision.
NOT SURE WHAT YOU NEED?
PLEASE CALL US AND WE’LL BE HAPPY TO HELP!
ADVANCED WORK HOLDING PACKAGE
Includes:
ST 48 Precision Toolmakers Vise
ST 23 Angle Plate
ST 24 Swivel Angle Plate
ST 50 V-Block Set
ST 149 PALMGREN STYLE VISE
$99.95
$39.95
$89.95
$14.95
$149.95
394.75
30th Anniversary Price ONLY $349.95
1-800-343-5775
27
MACHINISTS’ LAYOUT PACKAGE ITEM# ST 153
$99.95
SHOPMASTER BUILT IN
VALUE
comes standard with a 5” 3 jaw chuck
Add the
MACHINISTS’ LAYOUT PACKAGE
for all your layout needs
Includes:
6 piece tehnical measuring set
Transfer Punch Set
Alpha-Numeric Punch Set
Combo 12” Rule & Square
Machinist Blue
(your choice spray or felt-tip)
ST 75 Machinist Squares
Special Package Price
ONLY
ST 131
ST 71
ST 72
ST 74
ST 76
Just as a carpenter needs a pencil
and tape measure, the metal worker
needs a specific set of tools to layout
his work. This specialty set will allow
you to mark with a high level of precision on pieces that are flat, round,
or something in-between. When you
have no room for second-guessing,
the tools in this package are essential
to have in your toolbox.
$24.95
$14.95
$12.95
$69.95
$12.95
$29.95
$165.70
$139.95
$99.95
C.M. Federal Way, WA
Chuck is the consumate machinist, skilled in hand and
head, he created this 1/4 scale supercharged V-8 from
his own design. Chuck is a retired Boeing machinist and
has 2 CNC controlled ShopTask machines in his home
shop. He is making more things now than he was while
working at Boeing!
At ShopmaSTer, our policy has ALWAYS been to help customers buy the tools that they NEED. We have never
used the high-pressure approach to sell everything in our catalog. If you think a tool package is what you
are looking for, but are not 100% certain, please call first and speak to someone who can advise you, and
save you money, either by taking advantage of our 30th Anniversary Package pricing specials, or by suggesting a few tools to buy “a la carte”. We are here to assist you, not to pressure you into making perhaps,
the wrong choices!
28
[email protected]
ECONOMY HANDY TOOL PACKAGE ITEM# ST 154
$39.95
SHOPMASTER BUILT IN VALUE
Your New Shopmaster Patriot already comes standard
with inch dials on all motions!
ECONOMY HANDY TOOL PACKAGE
Includes:
ST 68 Brass Pocket Caliper
$9.95
ST 88i Pocket Drill Gauge (inch)
$5.95
ST 88m Pocket Drill Gauge (metric)
$5.95
ST 63 Feeler Gauge Set
$6.95
ST 26 Screw Pitch Gauge Set
$4.95
ST 64 Inside/Outside Calipers & Square $18.95
ST 109 Carbide De-burring Tool
$19.95
ST 113 Protractor and Depth Gauge Set $14.95
$87.60
$59.95
ONLY $39.95
All the tools listed in this convenient package are great time savers!
They will fit anywhere and are invaluable for measuring stock, sorting through loose drills, and other small but necessary tasks. These
handy tools are not expensive to purchase individually, however it’s
always the “little things” that seem to add up! We have made it easy
and affordable for you to get them all for a discount by creating the
“Economy Handy Tool Package”.
LATHE-MILL-DRILL COOLANT PACKAGE ITEM# ST 155
SHOPMASTER
BUILT IN VALUE
$179.95
JT’s TIP:
TO SAVE YOU
MONEY!
Put a small
Your New Shopmaster Patriot
piece of foam
already comes standard with a chip
rubber
over the
tray built right into the Shopmaster
workbench.
return to filter
A retail value of $250.00!!
out all the large
chips. This will
Add the
save you the
Lathe-Mill-Drill Coolant Package
cost
of replacto protect your work
includes:
ing so many
For most quick jobs, using a spray bottle filled with
filters on your
coolant is a good and efficient way to rinse away ST37F Flood Coolant System $99.95 coolant system!
$49.95
chips. When running a big job, however, especially ST116 Magnetic Base
Retail Value If Sold Separately $149.90 The Shopmaster FloodCoolant
under CNC control, a dull tool could cause large erSystem can only be used with
rors! A flood coolant system is essential to prevent 30th Anniversary Price ONLY $129.90 equipmen that is mounted to a
these 100% avoidable errors. The magnetic base
heavy duty bench with a chip
allows you to direct the coolant flow to the point of
tray and a tube that will return
the cut, keeping the tool cool and washing away
to the pump. At Shopmaster we have made it easy:
the chips that cause unnecessary wear. We have
The Shopmaster Patriot comes standard with an all steel
put together the 3 major components that you will
6-leg bench. This standard feature already has a built-in
need to cool your machine into a convenient and
chip tray and return tube.
affordable package.
No additional purchase necessary!!!
1-800-343-5775
29
EASY THREADING PACKAGE ITEM # ST 145 $189.95
SHOPMASTER
BUILT IN VALUE
comes standard with these handy tools for
Threading - a retail value of $ 354.90!
Auto Stop, and Power Driven Tailstock
EASY THREADING PACKAGE
includes:
ST 21: 40pc Inch Tap & Dies Set
ST 21m: 40pc Metric Tap & Dies Set
ST 55: Tap Extension Set
ST 77: 29pc Drill Set
ST 82: Tapping Fluid
ST 84s: Center Drills & Countersinks
ST 107: Floating T-Handle Set
ST 39: Screwcutting In The Lathe (vol #3)
ST 114: Floating Die Holder Set
Retail Value (if sold separatley)
Package Price
27th Anniversary Special Price ONLY
$49.95
$19.95
$12.95
$9.95
$19.95
$24.95
$17.95
$235.55
$199.95
$189.95
$49.95
$29.95
Your Shopmaster is fully setup for traditional single point threading,
but for the most common threads, a tap & die is the fast method.
This specifically selected package includes everything you need to
thread the world’s most commonly used fasteners.
Q: I already own a Shopmaster machine, can I get these special
tool package deals at the 30th Anniversary Price?
A: NO PROBLEM! At Shopmaster, we value ALL of our customers,
no special “membership card” required! The package prices are valid
for everyone. We also carry all the accessories seperately in case
you already have one or more of the tools that come in the package,
as well as spare parts for older model machines.
GUNSMITHING PACKAGE
ITEM# ST 146 $109.95
Your New Shopmaster Patriot already comes standard with
these Gunsmithing Essentials: compound tool post, steady
rest, follow rest, lathe spindle indexer, MT4 Center and Face
plate. - a retail value of $519.60!!
Add the Gunsmithing Package for a super set-up:
For the advanced machinist involved in the high
precision field of Gunsmithing, this package offers
all the essentials you need. We have included a
FREE BOOK on building a .50 caliber target rifle
written by a SHOPMASTER customer!
30
ST 43 Turning and Grinding Dogs
ST 39 Volume 13 “Rifle Re-barreling” book
ST 3 60 degree Threading Carbide
ST 11 Carbide Boring Tool/ Internal Threading Tool
ST 10 Fly cutter
ST 30 Half Center
27th Anniversary Special Price
ONLY
[email protected]
$29.95
$24.95
$6.95
$39.95
$21.95
$11.95
$135.70
$119.95
$109.95
ULTIMATE DRILLING PACKAGE ITEM# ST 157
standard with 1/2” Drill Chuck, 3-Jaw Chuck,
and Tailstock. A Retail Value of $402.85!!
Add the
Ultimate Drilling Package
for ultimate drilling versatility
Includes:
ST 77 25 piece Drill Set (metric)
ST 78 115 piece Drill Set
ST 80 8 piece Step-Shank Drills
ST 82 Drilling/Tapping Fluid
ST 95 14 pieceChucking Reamer Set
ST 97 29 piece Reamer Set
ST 84s Center Drill / Countersink Set
ST 122 Countersink and Deburring Set
ONLY
$29.95
$79.95
$49.95
$12.95
$79.95
$149.95
$9.95
$14.95
$427.60
399.95
$349.95
ADVANCED DIVIDING PACKAGE
ITEM# ST 158 $379.95
$349.95
Do You Have Holes To Drill?
Who doesn’t! The Shopmaster Ultimate Drilling Package will do just about
any drilling job you can imagine!
Included in the package are also tools that will allow you to clean,
ream and deburr your holes for that professional finish!
standard with a multi-purpose 5 inch 3-jaw chuck
A retail value of $15995!!
Add the
Advanced Dividing Package
For your advanced operations
Includes:
ST 51 6” Horizontal/Vertical Rotary Table
ST 51D Dividing Plate Set
ST 51T Adjustable Tailstock
ST 39 Gears and Gearcutting (book #17)
ST 39 Dividing (book #37)
ONLY
CNC UPGRADES AVAILABLE
The ST 51 (Rotary Table) can be ordered as a CNC
driven unit as part number ST 32 $499.95
If you already own an ST 51 (RotaryTable) and would
like to make it CNC driven, the upgrade is listed as part
number ST 51cnc please call for more information.
Like all Shopmaster tools, the CNC driven Rotary
Table may still be operated manually.
$249.95
$49.95
$79.95
$24.95
$19.95
$424.75
$399.95
$379.95
Once you are ready for cutting your own gears and
splines, you will need a high quality dividing set.
Shopmaster has designed this custom tool package
for maximum gear-cutting potential on the
Shopmaster Patriot machine.
1-800-343-5775
31
SAVE $1800.00!!
2013 SHOPMASTER PATRIOT
REGULAR RETAIL PRICE $7495.00
FOR A LIMITED TIME...
YOU PAY ONLY
$5695.00!!!
PLUS FREIGHT
SAVE ANOTHER
$100.OO!!!
ORDER ST130 - DIGITAL READ-OUT
WITH YOUR NEW PATRIOT MACHINE
AND PAY ONLY $799.00! (REG. $899.00)
PREPAY SPECIAL
(800) 343 5775
[email protected]
ORDER NOW!!!
PRE CONFIGURED COMPUTER INCLUDED
Save 2% more
by paying with a check

patriot VFD - SHOPMASTER

Transcription

Similar documents

HARDINGE® HLV-H - Babin Machine Tool

Oil States Houma Machine Shop

4-page pdf brochure - Babin Machine Tool

Windward Community College - PACT Kaneohe Community Family

Squirrel Nut Zippers

PUBLIC AUCTION - Industrial Auctioneers Association

Asset Sales, Inc. FIVE STAR AIRPORT ALLIANCE, INC.

NIM-COR INC. - Asset Sales

IMT MEA_06272016 - MyEquipAuctions.com

nanocellulose - Oregon State University

32nd AAMDC: Operation Iraqi Freedom