Untitled - Heesen Yachts

The Heesen 50 metre steel displacement yacht is a combination of space, performance and Heesen Dutch quality. A precisely
calculated hull and twin MTU engines give a top speed of 14,5 knots and a range of 3.200 nautical miles.
In addition, this yacht is remarkably efficient. The specially-designed bulbous bow creates an anti-wave for a smoother path
through the water. This results in a reduction in the power required to reach a top speed of over 14 knots. Less power requires
less fuel.
The huge sun deck has a completely flexible layout – sunbathing, dining, fully-enclosed gym – or all three. There is also a
large foredeck space that can be used for sunbathing and casual dining in privacy while the yacht is in port, or even as a
heli-pad.
Vast interior volume means incredible amounts of space. From the massive, open-plan main saloon, to a glazed 270 degree
upper deck sky lounge or up to six cabins (including a full-beam master suite). Heesen expertise in weight-reduction means
that even heavy materials such as swathes of glass and marble do not impact on the yacht’s performance.
GENERAL
TECHNICAL DETAILS
Hull type:
Twin Propeller, round bilge, displacement
Maximum speed (50% load):
14,5 knots
Naval Architect:
Van Oossanen / Heesen Yachts
Range at 13 knots:
3.200Nm
Exterior Styling:
Omega Architects
Fuel capacity:
80.000 litres / 21.130 US gallons
Lloyds
Fresh water:
20.000 litres / 5.280 US gallons
Classification:
100A1 SSC YACHT [ ] LMC
Large commercial Yacht Code LY2 / MCA
Hull:
Steel
PROPULSION DETAILS
Superstructure:
Aluminium
Main Engines:
ACCOMMODATION
Guests:
Cabins:
10 / 12
2 x MTU 8V 4000 M70
Maximum Power:
2 x 1.160kW
Gearbox:
2 x ZF 4661
Engine Control:
MTU Blue Vision, three control stands
Full-beam master suite,
Propellers:
Schaffran five blade fixed pitch Ø 1.600mm
two double cabins, two twin cabins
Generators:
2 x Kilo-Pak, each 150kW
1 x Kilo-Pak, emergency 50kW
DIMENSIONS
Bowthruster:
HRP 110kW, electrically driven
Length over all:
50,50m / 165ft 8in
Steering system:
Sperry Marine Systems
Beam over all:
9,60m / 31ft 6in
Stabilizers:
VT Naiad, type 820 with 2 fins of 4,17m2, zero speed
Draft:
3,25m / 10ft 8in
Displacement (50% load):
525 tons
This document has been prepared for general marketing purposes. The information contained in this brochure (including without limitation any information concerning the dimensions, capabilities and performance characteristics of the subject yacht) is given in good faith but is not warranted to be
accurate. All such information is subject to change at any time without notice. Heesen Yachts gives no warranty or representation, nor shall it be liable, in contract, tort or any other way, for any claims relating to or arising from any use made of any such information. All intellectual property rights of
whatsoever nature and howsoever arising in this brochure belong to Heesen Yachts BV without whose prior written consent this brochure may not be copied, adapted, distributed, published, displayed, communicated to the public or otherwise used in any way in whole or in part anywhere in the world.