- Olmar Supply

Transcription

- Olmar Supply

Premium-quality fasteners for every construction need.
Get the Point. Strong-Point.
Self-Drilling Screws
Drywall Screws
Stainless Steel Screws Needle Point Screws
Los Angeles 800.762.2004
Chicago 800.533.9669
Atlanta 800.822.9690
www.strong-point.net • [email protected]
Dallas 800.558.7222
Pole Gripper Screws
Woodworking Screws
Outdoor Screws
Cement Board Screws
Concrete Screws
Special Application
Portland 800.434.5606
Houston 800.558.7222
An INTERCORP Brand
Cleveland 800.533.9669
Ver. 2
About Intercorp
Terms and Conditions
Founded in 1988, Intercorp has established itself as an industry leader in the
fastener distribution business. Our flagship brand, Strong-Point®, is delivered
to thousands of distributors throughout the United States each year. The brand
consists of a variety of high-end fasteners including: Self-Drilling, Needle Point,
Woodworking, Stainless Steel, Drywall, Pole Gripper, Outdoor, Concrete, and
Cement Board screws. With an outstanding reputation for customer service,
quick delivery, and support for the distribution channel, Intercorp is unmatched
when it comes to high-quality fasteners.
TERMS - Net 30 days OAC. FOB Point of Origin. All orders subject to
acceptance by Intercorp. Minimum order is $50.00.
PREMIUM QUALITY - Premium carbon and stainless steel fasteners are
critical to our business. It doesn’t go out the door without the Intercorp stamp
of approval. This is why we stand firmly behind every transaction we make.
CUSTOMER SERVICE - You will come to rely on the knowledge and support
of our staff. We are here to help you find solutions.
DROP SHIPMENTS - Orders may be drop shipped at the request of the
distributor. Normal freight policy will prevail.
SHORTAGES - Any shortages on your shipment must be reported within
10 days of the shipping date for proper verification and possible adjustment.
All packages are sealed when leaving the factory. If a seal is broken when
received, submit your claim directly to the delivering carrier for your losses.
WARRANTY - Intercorp stands behind all of our products. Any item may be
returned due to defective workmanship or materials. The item will be replaced
or credit will be issued.
WILL CALL - Orders are ready in 30 minutes or less from one of our 7 warehouses: Los Angles, Chicago, Atlanta, Dallas, Portland, Houston, Cleveland.
FACTORY DIRECT/MILL - We can import a broad selection of volume
fasteners in addition to our standard product line of premium fasteners in steel
and stainless steel. Private labeling of containers is also available.
Master
Distributor
Competitive Pricing, Huge Inventory, Great Freight Policies
Warehouse Locations
Los Angeles - (800) 762-2004
641 North Poplar Street
Orange, CA 92868
Tel: (714) 744-2622
Fax: (714) 744-4672
[email protected]
Chicago - (800) 533-9669
2541 Millennium Drive
Elgin, IL 60124
Tel: (847) 841-8860
Fax: (847) 841-8875
[email protected]
Atlanta - (800) 822-9690
2160 Breckinridge Blvd.
Lawrenceville, GA 30043
Tel: (770) 326-9960
Fax: (770) 326-9996
[email protected]
Dallas - (800) 558-7222
1252 Avenue T
Grand Prairie, TX 75050
Tel: (972) 602-1080
Fax: (972) 602-1117
[email protected]
Same Day Shipping
From All Seven Locations!
Portland - (800) 434-5606
9494 SW Tualatin-Sherwood Rd.
Tualatin, OR 97062
Tel: (503) 783-5550
Fax: (503) 783-5555
[email protected]
Houston - (800) 558-7222
3701 Yale Street
Houston, TX 77018
Tel: (713) 692-1167
Fax: (713) 692-1274
[email protected]
Cleveland - (800) 533-9669
18450 South Miles Road
Warrensville Heights, OH 44128
Tel: (216) 750-2265
Fax: (216) 750-2266
[email protected]
Product Listing
Stainless Steel Screws
410 Stainless Steel Unslotted Indented HWH, Self-Drilling.........................10-11
410 Stainless Steel Unslotted Indented HWH w/Bonded Washer, Self-Drilling..11
18-8 Stainless Steel Bonded Sealing Washers...................................................11
Unslotted Indented Hex Washer Head.............................................................01
410 Stainless Steel Phillips Flat Head, Self-Drilling..........................................11
Unslotted Indented Hex Washer Head w/Bonded Washer...............................02
410 Stainless Steel Phillips Pan Head, Self-Drilling.........................................12
Galvanized Steel Bonded Sealing Washers......................................................02
410 Stainless Steel Phillips Modified Truss (R/W) Head, Self-Drilling..............12
Phillips Pan Head............................................................................................03
305 Stainless Steel Phillips Bugle Head, Coarse Thread...................................12
Square Drive Pan Head....................................................................................03
305 Stainless Steel Square Bugle Head, Coarse Thread, Type ‘17’....................12
Phillips Flat Head............................................................................................03
305 Stainless Steel Square Trim Head, Coarse Thread, Type ‘17’......................12
Phillips Oval Head...........................................................................................03
Needle Point Screws
Phillips Wafer Head.........................................................................................04
Slotted Indented Hex Washer Head..................................................................09
Star Drive Wafer Head.....................................................................................04
Slotted Indented Hex Washer Head w/Bonded Washer.....................................10
Phillips Flat Head Reamer w/Wings..................................................................04
Woodworking Screws
Phillips #6 Oval Head Sems w/Finishing Washer............................................04
Phillips Flat Head Particle Board Screws.........................................................15
Phillips Bugle Head.........................................................................................05
Square Flat Head Particle Board Screws..........................................................15
Phillips Bugle Head Pilot Point.......................................................................05
Phillips Flat Head w/Nibs Particle Board Screws............................................16
Phillips Pan Head Framing Screws.................................................................05
Phillips Flat Head w/Nibs Particle Board Screws, Type ‘17’...........................16
Phillips Pancake Head.....................................................................................06
Square Drive Flat Head w/Nibs Particle Board Screws, Type ‘17’....................16
Phillips Modified Truss (R/W) Head.................................................................06
Face Framing #7 Pan Head, Type ‘17”............................................................16
Phillips Flat Truss w/Serrations......................................................................06
Face Framing #7 Pan Head, Square Drive, Coarse, Type ‘17’.........................16
Square Drive Trim Head...................................................................................06
Phillips Oval and Flat Particle Board Screws “Hinge Screws”.........................17
Phillips Trim Head...........................................................................................06
Draw Bolt - Joint Fasteners............................................................................17
Drywall Screws
Pole Gripper Screws
Phillips Bugle Head, Fine Thread....................................................................07
Unslotted Indented Hi-Hex Washer Head w/Shoulder, Type S........................18
Phillips Bugle Head, Coarse Thread.................................................................07
Phillips Bugle Head, Hi-Low Thread................................................................08
Unslotted Indented Hi-Hex Washer Head w/Shoulder, Hi-Low, Type ‘17’........18
Square Bugle Head Coarse Thread.................................................................08
Phillips Bugle Head Laminating Screws...........................................................08
Concrete Screws
Phillips Trim Head Sharp Point........................................................................08
Slotted Indented Hex Washer Head, Hi-Low, Diamond Point..........................19
Square Trim Head Sharp Point........................................................................08
Phillips Flat Head, Hi-Low, Diamond Point.....................................................19
Phillips Pan Head Framing Screws.................................................................08
Cement Board Screws
Phillips Pancake Head.....................................................................................08
Phillips Wafer Head w/Nibs Cement Board Screws.......................................20
Phillips Modified Truss (R/W) Head, K-Lath....................................................09
Phillips Wafer Head w/Nibs Hi-Low Sharp Point...........................................20
Outdoor Screws
Phillips Wafer Head w/Nibs Hi-Low Spoon Point..........................................20
Phillips Bugle Head, Coarse Thread.........................................................13-14
Phillips Flat Head w/Nibs and Wings, Fiber Board Screws............................20
Square Bugle Head, Coarse Thread...............................................................13
Special Application
Square Bugle Head, Coarse Thread, Type ‘17’..............................................13
Acoustical Eye Lags.........................................................................................20
Star Flat Head w/Nibs, Coarse Thread, Type ‘17’.............................................14
Acoustical Eye Lag Driver and Star Bits...........................................................20
w/EPDM Bonded Washer.........................................................................18
w/EPDM Bonded Washer.........................................................................18
Unslotted Indented Hex Washer Head, Zinc Plated
• Meets F.I.P.-1000.7 for torsional strength & drill speed
• Meets ASTM A 510 for carbon steel manufacturing
Size
Part No.
Pt.
Qty.
6-20 x 3/8
H606
2
20M
6-20 x 1/2
H608
2
15M
6-20 x 5/8
H610
2
15M
6-20 x 3/4
H612
2
10M
8-18 x 1/2
H808
2
10M
8-18 x 5/8
H810
2
10M
8-18 x 3/4
H812
2
10M
8-18 x 1
H816
2
8M
8-18 x 1-1/4
H820
2
5M
8-18 x 1-1/2
H824
2
5M
8-18 x 2
H832
2
3M
10-16 x 1/2
H1008
2
8M
10-16 x 5/8
H1010
2
8M
10-16 x 3/4
H1012
3
8M
10-16 x 3/4**
H1012H
3
6M
10-16 x 1
H1016
3
5M
10-16 x 1-1/4
H1020
3
4M
10-16 x 1-1/2
H1024
3
3M
10-16 x 2
H1032
3
2M
10-16 x 2-1/2
H1040
3
1M
10-16 x 3
H1048
3
1M
12-14 x 3/4
H1212
3
4M
12-14 x 1
H1216
3
4M
12-14 x 1-1/4
H1220
3
3M
12-14 x 1-1/2
H1224
3
3M
12-14 x 2
H1232
3
2M
12-14 x 2-1/2
H1240
3
1.5M
12-14 x 3
H1248
3
1M
12-14 x 4
H1264
3
.5M
14-14 x 3/4
H1412
3
4M
14-14 x 1
H1416
3
3M
14-14 x 1-1/4
H1420
3
2M
14-14 x 1-1/2
H1424
3
2M
14-14 x 1-3/4
H1428
3
1.5M
14-14 x 2
H1432
3
1.5M
14-14 x 2-1/2
H1440
3
1M
14-14 x 3
H1448
3
1M
14-14 x 4
H1464
3
.5M
14-14 x 4-1/2
H1472
3
.5M
14-14 x 5
H1480
3
.5M
14-14 x 6
H1496
3
.5M
14-14 x 7/8 #12 HD
H1
1
3M
**Hi-Hex Head w/Reverse Serrations - Head Height: .160 - .178
Lbs.*
40
35
39
31
35
40
45
44
33
38
29
40
44
50
42
40
37
32
26
15
18
33
40
35
40
33
30
23
16
50
45
35
40
34
38
30
35
22
24
27
31
36
Drill Capacity (in.)
.035 - .090
.035 - .090
.035 - .090
.035 - .090
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .110
.035 - .110
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.018 - .090
Size
12-24 x 7/8
Part No.
H4
Pt.
4
Qty.
4M
Lbs.*
36
.125 - .250
Size
12-24 x 1-1/4
12-24 x 1-1/2
12-24 x 2
12-24 x 3
Part No.
H5
H52
H53
H54
*Carton weights are approximate and may vary.
Pt.
5
5
5
5
Qty.
3.5M
2.5M
2M
1M
Lbs.*
39
33
33
23
.125 - .500
.125 - .500
.125 - .500
.125 - .500
1
• Zinc plating meets ASTM B-117 for salt spray corrosion
• Meets SAE J78 for performance & dimensional specifications
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
2000 RPM
Material Application
Attaches metal to metal.
Attaches metal to metal. Lap/Stitching.
Drill Speed
1500 RPM
Drill Speed
1500 RPM
1500 RPM
1500 RPM
1500 RPM
www.strong-point.net
Unslotted Indented Hex Washer Head, Zinc Plated w/Bonded NEO-EPDM Washer
Size
8-18 x 1/2
8-18 x 5/8
8-18 x 3/4
8-18 x 1
8-18 x 1-1/4
8-18 x 1-1/2
8-18 x 2
10-16 x 1/2
10-16 x 5/8
10-16 x 3/4
10-16 x 1
10-16 x 1-1/4
10-16 x 1-1/2
10-16 x 2
10-16 x 2-1/2
10-16 x 3
12-14 x 3/4
12-14 x 1
12-14 x 1-1/4
12-14 x 1-1/2
12-14 x 2
12-14 x 2-1/2
12-14 x 3
12-14 x 4
14-14 x 3/4
14-14 x 1
14-14 x 1-1/4
14-14 x 1-1/2
14-14 x 1-3/4
14-14 x 2
14-14 x 2-1/2
14-14 x 3
14-14 x 4
14-14 x 5
14-14 x 6
14-14 x 7/8 #12 HD
Part No.
HA808
HA810
HA812
HA816
HA820
HA824
HA832
HA1008
HA1010
HA1012
HA1016
HA1020
HA1024
HA1032
HA1040
HA1048
HA1212
HA1216
HA1220
HA1224
HA1232
HA1240
HA1248
HA1264
HA1412
HA1416
HA1420
HA1424
HA1428
HA1432
HA1440
HA1448
HA1464
HA1480
HA1496
HA1
Pt.
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
Qty.
5M
5M
5M
4M
3M
2.5M
2.5M
4M
4M
4M
3M
2.5M
2M
1.5M
1M
1M
3M
3M
2.5M
2M
1.5M
1M
1M
.5M
3M
2.5M
2M
2M
1.5M
1.5M
1M
1M
.5M
.5M
.5M
2.5M
Lbs.*
28
30
33
30
26
24
29
30
32
35
32
30
26
23
18
21
32
37
35
31
29
22
26
16
45
44
40
45
38
41
33
38
23
27
32
38
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .110
.035 - .110
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.018 - .090
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
2000 RPM
Size
12-24 x 7/8
Part No.
HA4
Pt.
4
Qty.
3M
Lbs.*
38
.125 - .250
Part No.
HA5
HA52
HA53
HA54
Pt.
5
5
5
5
Qty.
3M
2.5M
2M
1M
Lbs.*
42
41
38
28
.125 - .500
.125 - .500
.125 - .500
.125 - .500
Bonded Washer Size
1/2” Outside Diameter
• Bonded washer creates leak proof seal
Drill Speed
1500 RPM
Size
12-24 x 1-1/4
12-24 x 1-1/2
12-24 x 2
12-24 x 3
Bonded Washer Size
• Used for metal roofing applications
Drill Speed
1500 RPM
1500 RPM
1500 RPM
1500 RPM
Bonded Washer Size
Galvanized Steel Bonded Sealing Washers
Size
8(10) x 1/2” O.D.
8(10) x 5/8” O.D.
12 x 9/16” O.D.
Part No.
HAW0810
HAW085
HAW1214
Qty.
12.5M
7.5M
10M
Lbs.*
28
29
25
Size
12 x 5/8” O.D.
14 x 5/8” O.D.
Part No.
HAW125
HAW14
Qty.
7.5M
10M
Lbs.*
28
27
• Creates leak proof seal and provides a
moisture barrier when used in
conjunction with proper fastener.
2
Phillips Pan Head, Zinc Plated
Size
6-20 x 3/8
6-20 x 1/2
6-20 x 5/8
6-20 x 3/4
6-20 x 1
8-18 x 3/8
8-18 x 1/2
8-18 x 5/8
8-18 x 3/4
8-18 x 1
8-18 x 1-1/4
8-18 x 1-1/2
8-18 x 2
10-16 x 1/2
10-16 x 5/8
10-16 x 3/4
10-16 x 1
10-16 x 1-1/4
10-16 x 1-1/2
10-16 x 2
10-16 x 2-1/2
10-16 x 3
Part No.
P63
P64
P65
P66
P68
P83
P84
P85
P86
P88
P810
P812
P816
P104
P105
P106
P108
P109
P110
P116
P120
P124
Pt.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
Qty.
20M
20M
15M
10M
10M
10M
10M
10M
10M
8M
5M
5M
3M
10M
10M
8M
5M
5M
4M
3M
1.5M
1M
Lbs.*
36
42
35
29
35
28
32
37
42
41
31
35
27
45
52
47
38
41
40
38
21
19
.035 - .090
.035 - .090
.035 - .090
.035 - .090
.035 - .090
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .110
.035 - .110
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Square Drive Pan Head, Zinc Plated
Size
8-18 x 1/2
8-18 x 3/4
10-16 x 3/4
Part No.
P84Q
P86Q
P106Q
Pt.
2
2
3
Qty.
10M
10M
8M
Lbs.*
32
42
47
.035 - .100
.035 - .100
.035 - .176
Drill Speed
2500 RPM
2500 RPM
2500 RPM
Phillips Flat Head, Zinc Plated
Size
8-18 x 1/2
8-18 x 3/4
8-18 x 1
8-18 x 1-1/4
8-18 x 1-1/2
10-16 x 3/4
10-16 x 1
10-16 x 1-1/4
10-16 x 1-1/2
10-16 x 2
Part No.
F82
F83
F84
F85
F86
F106
F108
F109
F110
F116
Pt.
2
2
2
2
2
3
3
3
3
3
Qty.
10M
10M
8M
5M
5M
8M
5M
3M
4M
3M
Lbs.*
25
35
34
26
31
39
32
31
37
35
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
• For counter-sunk holes
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Phillips Oval Head, Zinc Plated
Size
8-18 x 3/4
8-18 x 1
8-18 x 1-1/4
8-18 x 1-1/2
Part No.
O86
O88
O89
O90
Pt.
2
2
2
2
Qty.
10M
7.5M
6M
5M
Lbs.*
40
38
36
36
.035 - .100
.035 - .100
.035 - .100
.035 - .100
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
3
Phillips Wafer Head, Zinc Plated
Size
8-18 x 1
10-24 x 3/4
10-24 x 1
10-24 x 1-1/4
10-24 x 1-7/16**
10-24 x 1-1/2
10-24 x 2
1/4-14 x 1-7/8
**w/Wings
Part No.
W804
W103
W104
W105
R107
W106
W108
W117
Pt.
2
3
3
3
3
3
3
3
Qty.
8M
7M
5M
3M
4M
2M
2M
1.5M
Lbs.*
38
35
35
27
38
22
27
28
.035 - .100
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.048 - .220
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
1750 RPM
Attaches plywood to metal.
Star Drive Wafer Head, Zinc Plated
Size
10-16 x 3/4
10-16 x 1
10-16 x 1-1/4
10-16 x 1-1/2
Part No.
W103T
W104T
W105T
W106T
Pt.
3
3
3
3
Qty.
7M
5M
3M
2M
Lbs.*
35
35
27
22
.035 - .176
.035 - .176
.035 - .176
.035 - .176
• T-25 Star Drive for anti cam-out and higher torque values
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Phillips Flat Head Reamer w/Wings, Zinc Plated
• Used for attaching lumber or headers to steel
Size
10-16 x 1-5/8
12-24 x 2
12-24 x 2-1/4
12-24 x 2-1/2
12-24 x 2-1/2
1/4-20 x 2-3/4
1/4-20 x 3-1/4
1/4-20 x 3-1/2
1/4-20 x 3-3/4
Part No.
R158
R200
R214
R2123
R212
R234
R314
R312
R334
Pt.
3
3
3
3
4
4
4
4
4
Qty.
4M
2M
1.5M
1.5M
1.5M
1M
1M
.8M
.5M
Lbs.*
36
32
27
30
30
30
35
30
20
.060 - .176
.110 - .210
.110 - .210
.110 - .210
.110 - .250
.110 - .375
.110 - .375
.110 - .375
.110 - .375
• Wings ream hole in wood preventing “jacking action”
Drill Speed
2500 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
Attaches wood to metal.
Phillips Flat Head Reamer w/Wings, W.A.R. Coated
• Used for attaching lumber or headers to steel
• For use in pressure treated lumber
Size
12-24 x 2
12-24 x 2-1/2
1/4-20 x 2-3/4
1/4-20 x 3-1/4
1/4-20 x 3-1/2
1/4-20 x 3-3/4
Part No.
R200W
R212W
R234W
R314W
R312W
R334W
Pt.
3
4
4
4
4
4
Qty.
2M
1.5M
1M
1M
.8M
.5M
Lbs.*
32
30
30
35
30
20
.110 - .210
.110 - .250
.110 - .375
.110 - .375
.110 - .375
.110 - .375
• Wings ream hole in wood preventing “jacking action”
• Rated at 1,000/hrs. salt spray
Drill Speed
2000 RPM
2000 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
Phillips #6 Oval Head Sems, Zinc Plated w/Finishing Washer
Size
8-18 x 3/4
8-18 x 1
8-18 x 1-1/4
Part No.
E83
E84
E85
Pt.
2
2
2
Qty.
8M
6M
5M
Lbs.*
34
31
31
.035 - .100
.035 - .100
.035 - .100
4
• Commonly used for interior applications
Drill Speed
2500 RPM
2500 RPM
2500 RPM
Attaches carpet or vinyl to metal.
Phillips Bugle Head, Zinc Plated
Size
6-20 x 1
6-20 x 1-1/8
6-20 x 1-1/4
6-20 x 1-5/8
6-20 x 1-7/8
8-18 x 2-3/8
8-18 x 2-5/8
8-18 x 3
10-16 x 3-1/2
10-16 x 4
Part No.
D610Z
D611Z
D614Z
D615Z
D617Z
D823Z
D825Z
D830Z
D1031Z
D1040Z
Pt.
2
2
2
2
2
2
2
2
2
2
Qty.
10M
10M
8M
5M
4M
2.5M
2M
2M
1M
1M
Lbs.*
33
36
32
25
23
24
22
24
17
20
.035 - .090
.035 - .090
.035 - .090
.035 - .090
.035 - .090
.035 - .100
.035 - .100
.035 - .100
.035 - .110
.035 - .110
• Meets ASTM C 954 for attaching gypsum board to steel studs
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Attaches gypsum, insulation, wood to metal.
Phillips Bugle Head, Phosphate Coating
Size
6-20 x 1
6-20 x 1-1/8
6-20 x 1-1/4
6-20 x 1-5/8
6-20 x 1-7/8
8-18 x 2-3/8
8-18 x 2-5/8
8-18 x 3
10-16 x 3-1/2
10-16 x 4
Part No.
D610
D611
D614
D615
D617
D823
D825
D830
D1031
D1040
Pt.
2
2
2
2
2
2
2
2
2
2
Qty.
10M
10M
8M
5M
4M
2.5M
2M
2M
1M
1M
Lbs.*
33
36
32
25
23
24
22
24
17
20
.035 - .090
.035 - .090
.035 - .090
.035 - .090
.035 - .090
.035 - .100
.035 - .100
.035 - .100
.035 - .110
.035 - .110
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Phillips Bugle Head, Ruspert Coating
Size
6-20 x 1-1/4
6-20 x 1-5/8
Part No.
D614R
D615R
Pt.
2
2
Qty.
8M
5M
Lbs.*
32
25
.035 - .090
.035 - .090
• Exceeds 1,000/hrs. salt spray resistance
• Ruspert Coating meets ASTM B-117 for salt spray corrosion
Drill Speed
2500 RPM
2500 RPM
Attaches exterior sheathing to metal.
Attaches exterior sheathing to metal.
Phillips Bugle Head Pilot Point, Zinc Plated
Size
8-18 x 2
Part No.
D820Z
Pt.
2
Qty.
3.5M
Lbs.*
31
.035 - .104
• Pilot Point prevents “jacking action”
• Used for attaching 3/4” lumber or thinner to steel
Drill Speed
2500 RPM
Drill Speed
2500 RPM
2500 RPM
Attaches metal track to metal studs.
Phillips Pan Head Framing Screws, Phosphate Coating
Size
6-20 x 7/16
7-20 x 7/16
Part No.
F6
F7
Pt.
2
2
Qty.
10M
10M
Lbs.*
28
28
.035 - .090
.035 - .090
Phillips Pan Head Framing Screws, Zinc Plated
Size
6-20 x 7/16
7-20 x 7/16
Part No.
F6Z
F7Z
Pt.
2
2
Qty.
10M
10M
Lbs.*
28
28
.035 - .090
.035 - .090
Drill Speed
2500 RPM
2500 RPM
5
Phillips Pancake Head, Zinc Plated
Size
10-16 x 5/8
10-16 x 1
10-16 x 1-1/2
Part No.
PC5
PC8
PC12
Pt.
3
3
3
Qty.
8M
5M
4M
Lbs.*
41
34
36
.035 - .176
.035 - .176
.035 - .176
• Used in framing - Attaches panel clips to steel studs
Drill Speed
2500 RPM
2500 RPM
2500 RPM
Attaches panel clips to metal studs.
Phillips Modified Truss (R/W) Head, Zinc Plated
Size
8-18 x 1/2
8-18 x 3/4
8-18 x 1
8-18 x 1-1/4
8-18 x 1-5/8
8-18 x 1-7/8
8-18 x 2-1/2
8-18 x 3
10-16 x 3/4
12-14 x 3/4
Part No.
M82Z
M83Z
M84Z
M85Z
M87Z
M88Z
M92Z
M95Z
M106Z
M126Z
Pt.
2
2
2
2
2
2
2
2
3
3
Qty.
10M
8M
5M
5M
4M
2M
2M
1.5M
7M
4M
Lbs.*
37
37
28
34
32
18
23
20
38
25
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .100
.035 - .176
.035 - .210
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Attaches wire lath to metal studs.
Phillips Modified Truss (R/W) Head, Black Oxide
Size
8-18 x 1/2
8-18 x 3/4
8-18 x 1
8-18 x 1-1/4
Part No.
M82B
M83B
M84B
M85B
Pt.
2
2
2
2
Qty.
10M
8M
5M
5M
Lbs.*
37
37
28
34
.035 - .100
.035 - .100
.035 - .100
.035 - .100
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Finishing screw for use when aesthetics are important.
Phillips Flat Truss w/Serrations, Zinc Plated
Size
10-12 x 3/4
Part No.
FT106Z
Pt.
3
Qty.
8M
Lbs.*
37
.035 - .176
Drill Speed
2500 RPM
Attaches metal framing to metal.
Square Drive Trim Head, Zinc Plated
Size
6-20 x 1-5/8
6-20 x 2-1/4
8-18 x 3
Part No.
T1QZ
T2QZ
T3QZ
Pt.
2
2
2
Qty.
5M
3M
2M
Lbs.*
23
19
22
.035 - .090
.035 - .090
.035 - .100
Drill Speed
2500 RPM
2500 RPM
2500 RPM
Square Drive Trim Head, Phosphate Coating
Size
6-20 x 1
6-20 x 1-5/8
6-20 x 2-1/4
8-18 x 3
Part No.
T0Q
T1Q
T2Q
T3Q
Pt.
2
2
2
2
Qty.
10M
5M
3M
2M
Lbs.*
31
23
19
22
.035 - .090
.035 - .090
.035 - .090
.035 - .100
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
Phillips Trim Head, Phosphate Coating
Size
6-20 x 1-5/8
6-20 x 2-1/4
Part No.
T1P
T2P
Pt.
2
2
Qty.
5M
3M
Lbs.*
23
18
.035 - .090
.035 - .090
6
Drill Speed
2500 RPM
2500 RPM
Drywall Screws
Phillips Bugle Head, Fine Thread, Phosphate Coating
• Type ‘S’ point for fastening gypsum to light gauge steel
Size
6 x 3/4
6x1
6 x 1-1/8
6 x 1-1/4
6 x 1-1/2
6 x 1-5/8
6 x 1-3/4
6x2
6 x 2-1/4
7 x 1-1/2
7 x 2-1/2
8 x 2-1/2
8x3
Part No.
606
610
611
614
612
615
616
620
624
712
722
822
830
Qty.
15M
10M
10M
8M
6M
5M
4M
3.5M
3M
6M
2.5M
2.5M
2M
Lbs.*
38
30
33
28
23
22
20
19
18
33
20
22
21
Attaches gypsum board to light gauge steel.
Attaches double or multi-layered drywall to metal studs.
Attaches double or multi-layered drywall to metal studs.
Size
10 x 3-1/2
10 x 3-3/4
10 x 4
10 x 4-1/2
10 x 5
10 x 6
Part No.
1031
1033
1040
1041
1050
1060
Qty.
1M
.8M
.8M
.5M
.5M
.5M
Lbs.*
17
15
16
12
13
15
• Multi-purpose screw used in many
wood to wood applications
Attaches gypsum board, foam, insulation to wood.
Phillips Bugle Head, Coarse Thread, Phosphate Coating
• Used for gypsum board to wood applications
• Meets ASTM C 1002 for attaching gypsum board to wood studs
Size
6 x 3/4
6x1
6 x 1-1/8
6 x 1-1/4
6 x 1-1/2
6 x 1-5/8
6 x 1-3/4
6x2
6 x 2-1/4
7 x 1-1/2
7x2
7 x 2-1/2
8 x 2-1/2
8x3
Part No.
606C
610C
611C
614C
612C
615C
616C
620C
624C
712C
720C
722C
822C
830C
Qty.
15M
10M
10M
8M
6M
5M
4M
3.5M
3M
6M
3.5M
2.5M
2.5M
2M
Lbs.*
38
30
33
29
23
22
20
19
18
33
21
20
22
21
Attaches gypsum board to wood studs.
Attaches double or multi-layered drywall to wood studs.
Attaches double or multi-layered drywall to wood studs.
• Multi-purpose screw used in many
• Meets ASTM C 1002 for attaching gypsum board to wood studs wood to wood applications
Size
10 x 3-1/2
10 x 3-3/4
10 x 4
10 x 4-1/2
10 x 5
10 x 6
Part No.
1031C
1033C
1040C
1041C
1050C
1060C
Qty.
1M
.8M
.8M
.5M
.5M
.5M
Lbs.*
17
15
16
12
13
15
7
Drywall Screws
Phillips Bugle Head, Hi-Low Thread, Phosphate Coating
• Used in gypsum board, plastic, & wood to metal applications
Size
6x1
6 x 1-1/4
6 x 1-5/8
6x2
6 x 2-1/4
8 x 2-1/2
8x3
Part No.
610HL
614HL
615HL
620HL
624HL
822HL
830HL
Qty.
10M
8M
5M
3.5M
3M
2.5M
2M
Lbs.*
30
30
22
19
18
22
21
Attaches gypsum board to wood or metal studs.
Square Bugle Head, Coarse Thread, Phosphate Coating
Size
6 x 1-1/4
6 x 1-5/8
6x2
7x2
8 x 2-1/2
8x3
Part No.
614QC
615QC
620QC
720QC
822QC
830QC
Qty.
8M
5M
3.5M
3.5M
2.5M
2M
• Used for soft wood applications
Lbs.*
28
22
20
23
22
21
Attaches soft wood to wood studs.
Phillips Bugle Head, Laminating Screws, Phosphate Coating
Size
10 x 1-1/2
Part No.
LAM
Qty.
5M
Lbs.*
38
Attaches 3/4” to 3/4” gypsum board.
Phillips Trim Head, Sharp Point, Phosphate Coating
Size
6 x 1-5/8
6 x 2-1/4
Part No.
1PT
2PT
Qty.
5M
3M
• Used in wood finishing applications
Lbs.*
20
17
Attaches wood trim to drywall or studs.
Square Trim Head, Sharp Point, Phosphate Coating
Size
6x1
6 x 1-5/8
6 x 2-1/4
8x3
Part No.
0QT
1QT
2QT
3QT
Qty.
10M
5M
3M
2M
• Used in wood finishing applications
Lbs.*
26
20
17
20
Phillips Pan Head Framing Screws w/Serrations, Phosphate Coating
• Meets ASTM C 1002 for Type ‘S’ products
Size
6 x 7/16
7 x 7/16
Part No.
6F
7F
Qty.
10M
10M
Lbs.*
25
28
Gauge
20
20
• Type ‘S’ point for fastening light gauge steel
• Serrations for stripping control and vibration protecton
Attaches 20 gauge metal track to 20 gauge metal studs.
Attaches 20 gauge metal track to 20 gauge metal studs.
Phillips Pancake Head, Zinc Plated
• Multipurpose sheet metal screw
Size
10-12 x 1
10-12 x 1-1/2
Part No.
108PC
112PC
Qty.
5M
3M
Lbs.*
34
28
• Type ‘A’ for wood applications
Attaches panel clips to wood.
Attaches panel clips to wood.
8
Drywall Screws
Phillips Modified Truss (R/W) Head, K-Lath, Zinc Plated
• Multipurpose sheet metal screw for light to medium gauge applications
Size
Part No.
Qty.
Lbs.*
Gauge
8 x 1/2
84MZ
10M
35
24 - 20
Attaches wire lath to wood or light gauge metal.
8 x 9/16
85MZ
10M
37
24 - 20
8 x 3/4
86MZ
8M
37
24 - 20
8x1
88MZ
5M
27
24 - 20
8 x 1-1/4
89MZ
5M
32
24 - 20
8 x 1-5/8
90MZ
4M
34
24 - 20
8 x 1-7/8
92MZ
2.5M
23
24 - 20
8 x 2-1/2
95MZ
2M
21
24 - 20
8x3
97MZ
1.5M
20
24 - 20
Phillips Modified Truss (R/W) Head, K-Lath, Black Oxide
Size
Part No.
Qty.
Lbs.*
Gauge
8 x 9/16
85MB
10M
37
24 - 20
8 x 3/4
86MB
8M
37
24 - 20
8x1
88MB
5M
27
24 - 20
8 x 1-1/4
89MB
5M
32
24 - 20
8 x 1-5/8
90MB
4M
34
24 - 20
Needle Point Screws
Slotted Indented Hex Washer Head, Zinc Plated
Size
Part No.
Qty.
Lbs.*
Head Size
6 x 3/8
N606
20M
38
1/4” A.F. #6 Head
Attaches light gauge sheet metal to sheet metal.
7 x 1/2
N708
15M
44
1/4” A.F. #7 Head
8 x 1/2
N808
15M
50
1/4” A.F. #8 Head
8 x 5/8
N810
10M
35
1/4” A.F. #8 Head
8 x 3/4
N812
10M
40
1/4” A.F. #8 Head
8x1
N816
8M
40
1/4” A.F. #8 Head
8 x 1-1/4
N820
5M
29
1/4” A.F. #8 Head
8 x 1-1/2
N824
5M
33
1/4” A.F. #8 Head
8x2
N832
3M
27
1/4” A.F. #8 Head
10 x 1/2
N1008
10M
36
1/4” A.F. #8 Head
Attaches light gauge sheet metal to medium gauge sheet metal.
10 x 3/4
N1012
8M
38
1/4” A.F. #8 Head
10 x 1
N1016
5M
31
1/4” A.F. #8 Head
10 x 1-1/2
N1024
5M
40
1/4” A.F. #8 Head
10 x 1-1/2**
N1024H
3M
28
1/4” A.F. Hi-Head
10 x 2
N1032
2M
22
1/4” A.F. #8 Head
10 x 1/2
N10085
10M
47
5/16” A.F. #10 Head
10 x 3/4
N10125
8M
47
5/16” A.F. #10 Head
10 x 1
N10165
5M
36
5/16” A.F. #10 Head
10 x 1-1/2
N10245
3M
29
5/16” A.F. #10 Head
10 x 2
N10325
2M
26
5/16” A.F. #10 Head
**Hi-Hex Head
9
Needle Point Screws
Slotted Indented Hex Washer Head, Zinc Plated w/Bonded NEO-EPDM Washer
Size
Part No.
Qty.
Lbs.*
Head Size
Bonded Washer Size
8 x 1/2
NA808
5M
28
1/4” A.F. #8 Head
8 x 3/4
NA812
5M
32
1/4” A.F. #8 Head
8x1
NA816
4M
28
1/4” A.F. #8 Head
8 x 1-1/2
NA824
3M
28
1/4” A.F. #8 Head
8x2
NA832
2M
23
1/4” A.F. #8 Head
10 x 3/4
NA1012
4M
27
1/4” A.F. #8 Head
10 x 1
NA1016
3M
26
1/4” A.F. #8 Head
10 x 1-1/2
NA1024
2.5M
26
1/4” A.F. #8 Head
10 x 2
NA1032
2M
26
1/4” A.F. #8 Head
10 x 3/4
NA10125
4M
35
5/16” A.F. #10 Head
10 x 1
NA10165
2.5M
22
5/16” A.F. #10 Head
10 x 1-1/2
NA10245
2M
23
5/16” A.F. #10 Head
10 x 2
NA10325
2M
30
5/16” A.F. #10 Head
Less Than Full Carton Quantities are Available
on all Self-Drilling Stainless Steel Screws
410 Stainless Steel Unslotted Indented Hex Washer Head, Self-Drilling, Passivated & Waxed
Size
• Medium degree of corrosion resistance
Part No.
Pt.
Qty.
Lbs.*
Drill Speed
8-18 x 1/2
4H808
2
5M
18
.035 - .100
2500 RPM
8-18 x 3/4
4H812
2
5M
23
.035 - .100
2500 RPM
8-18 x 1
4H816
2
4M
22
.035 - .100
2500 RPM
10-16 x 1/2
4H1008
2
5M
26
.035 - .110
2500 RPM
10-16 x 3/4
4H1012
3
4M
25
.035 - .176
2500 RPM
10-16 x 1
4H1016
3
3M
24
.035 - .176
2500 RPM
10-16 x 1-1/4
4H1020
3
2.5M
23
.035 - .176
2500 RPM
10-16 x 1-1/2
4H1024
3
2M
21
.035 - .176
2500 RPM
10-16 x 2
4H1032
3
1.5M
15
.035 - .176
2500 RPM
12-14 x 3/4
4H1212
3
4M
33
.035 - .210
2000 RPM
12-14 x 1
4H1216
3
3M
30
.035 - .210
2000 RPM
12-14 x 1-1/4
4H1220
3
3M
35
.035 - .210
2000 RPM
12-14 x 1-1/2
4H1224
3
2.5M
33
.035 - .210
2000 RPM
12-14 x 2
4H1232
3
2M
33
.035 - .210
2000 RPM
12-14 x 2-1/2
4H1240
3
1M
18
.035 - .210
2000 RPM
14-14 x 3/4
4H1412
3
3M
38
.060 - .220
1750 RPM
14-14 x 1
4H1416
3
2.5M
38
.060 - .220
1750 RPM
14-14 x 1-1/4
4H1420
3
2M
35
.060 - .220
1750 RPM
14-14 x 1-1/2
4H1424
3
1.5M
30
.060 - .220
1750 RPM
14-14 x 2
4H1432
3
1M
25
.060 - .220
1750 RPM
14-14 x 2-1/2
4H1440
3
.8M
24
.060 - .220
1750 RPM
14-14 x 3
4H1448
3
.5M
17
.060 - .220
1750 RPM
14-14 x 4
4H1464
3
.5M
22
.060 - .220
1750 RPM
14-14 x 5
4H1480
3
.25M
13
.060 - .220
1750 RPM
14-14 x 6
4H1496
3
.25M
16
.060 - .220
1750 RPM
4H1
1
2.5M
30
.018 - .090
1750 RPM
Attaches metal to metal. Lap/Stitching.
14-14 x 7/8 #12HD
10
410 Stainless Steel Unslotted Indented Hex Washer Head, Self-Drilling, Passivated & Waxed
Size
12-24 x 1-1/4
12-24 x 1-1/2
12-24 x 2
Part No.
4H5
4H52
4H53
Pt.
5
5
5
Qty.
3M
2M
1.5M
Lbs.*
35
26
24
.125 - .500
.125 - .500
.125 - .500
Drill Speed
1500 RPM
1500 RPM
1500 RPM
410 Stainless Steel Unslotted Indented HWH, Self-Drilling, Passivated & Waxed w/Bonded NEO-EPDM Washer
Size
8-18 x 3/4
8-18 x 1
10-16 x 3/4
10-16 x 1
10-16 x 1-1/4
10-16 x 1-1/2
10-16 x 2
12-14 x 3/4
12-14 x 1
12-14 x 1-1/4
12-14 x 1-1/2
12-14 x 2
12-14 x 2-1/2
14-14 x 3/4
14-14 x 1
14-14 x 1-1/4
14-14 x 1-1/2
14-14 x 2
14-14 x 2-1/2
14-14 x 3
14-14 x 4
14-14 x 5
14-14 x 7/8 #12HD
Part No.
4HA812
4HA816
4HA1012
4HA1016
4HA1020
4HA1024
4HA1032
4HA1212
4HA1216
4HA1220
4HA1224
4HA1232
4HA1240
4HA1412
4HA1416
4HA1420
4HA1424
4HA1432
4HA1440
4HA1448
4HA1464
4HA1480
4HA1
Pt.
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
Qty.
5M
4M
4M
3M
2.5M
2M
1.5M
3M
3M
2.5M
2.5M
1.5M
1M
3M
2.5M
2M
1.5M
1M
.8M
.5M
.5M
.25M
2.5M
Lbs.*
35
30
35
31
30
26
22
32
37
35
39
28
22
45
44
40
34
28
26
18
22
14
38
.035 - .100
.035 - .100
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .176
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.035 - .210
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.060 - .220
.018 - .090
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
1750 RPM
2000 RPM
Size
12-24 x 1-1/4
12-24 x 1-1/2
12-24 x 2
Part No.
4HA5
4HA52
4HA53
Pt.
5
5
5
Qty.
3M
2M
1.5M
Lbs.*
42
33
29
.125 - .500
.125 - .500
.125 - .500
Bonded Washer Size
Drill Speed
1500 RPM
1500 RPM
1500 RPM
Bonded Washer Size
18-8 Stainless Steel Bonded Sealing Washers
Size
8(10) x 1/2” O.D.
8(10) x 5/8” O.D.
12 x 9/16” O.D.
Part No.
HAW810S
HAW105S
HAW12S
Qty.
12.5M
7.5M
10M
Lbs.*
28
29
25
Size
12 x 5/8” O.D.
14 x 5/8” O.D.
Part No.
HAW125S
HAW14S
Qty.
7.5M
10M
Lbs.*
28
27
• Creates leak proof seal and provides a
moisture barrier when used in
conjunction with proper fastener.
410 Stainless Steel Phillips Flat Head, Self-Drilling, Passivated & Waxed
Size
6-20 x 3/4
6-20 x 1
8-18 x 3/4
8-18 x 1
8-18 x 1-1/2
10-16 x 3/4
10-16 x 1
10-16 x 1-1/2
Part No.
4F63
4F64
4F83
4F84
4F86
4F103
4F104
4F106
Pt.
2
2
2
2
2
3
3
3
Qty.
10M
8M
7M
6M
4M
6M
4M
2.5M
Lbs.*
24
25
25
23
24
29
26
23
.035 - .090
.035 - .090
.035 - .100
.035 - .100
.035 - .100
.035 - .176
.035 - .176
.035 - .176
11
Drill Speed
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
2500 RPM
410 Stainless Steel Phillips Pan Head, Self-Drilling, Passivated & Waxed
Size
Part No.
Pt.
Qty.
Lbs.*
Drill Speed
6-20 x 3/8
4P63
2
20M
36
.035 - .090
2500 RPM
6-20 x 1/2
4P64
2
15M
32
.035 - .090
2500 RPM
8-18 x 1/2
4P84
2
10M
32
.035 - .100
2500 RPM
8-18 x 5/8
4P85
2
8M
30
.035 - .100
2500 RPM
8-18 x 3/4
4P86
2
7M
29
.035 - .100
2500 RPM
8-18 x 1
4P88
2
6M
31
.035 - .100
2500 RPM
8-18 x 1-1/4
4P810
2
5M
31
.035 - .100
2500 RPM
8-18 x 1-1/2
4P812
2
4M
28
.035 - .100
2500 RPM
10-16 x 1/2
4P104
2
8M
36
.035 - .110
2500 RPM
10-16 x 3/4
4P106
3
6M
35
.035 - .176
2500 RPM
10-16 x 1
4P108
3
4M
30
.035 - .176
2500 RPM
410 Stainless Steel Phillips Modified Truss (R/W) Head, Self-Drilling, Passivated & Waxed
Size
Part No.
Pt.
Qty.
Lbs.*
Drill Speed
8-18 x 1/2
4M82
2
5M
18
.035 - .100
2500 RPM
8-18 x 3/4
4M83
2
5M
23
.035 - .100
2500 RPM
8-18 x 1
4M84
2
4M
22
.035 - .100
2500 RPM
8-18 x 1-1/4
4M85
2
3M
20
.035 - .100
2500 RPM
8-18 x 1-5/8
4M87
2
3M
24
.035 - .100
2500 RPM
305 Stainless Steel Phillips Bugle Head, Coarse Thread
• For fencing, decks, patio furniture, spas
Size
Part No.
Qty.
• Highest degree of corrosion resistance
Lbs.*
8 x 1-1/4
814CSS
8M
40
Exterior wood screws for outdoor applications. Attaches wood to wood.
8 x 1-5/8
815CSS
5M
31
8x2
820CSS
3.5M
25
8 x 2-1/2
822CSS
2.5M
23
8x3
830CSS
2M
22
305 Stainless Steel Square Bugle Head, Coarse Thread, Type ‘17’
• Superior penetration through a variety of woods
Size
Part No.
Qty.
Lbs.*
6 x 1-1/4
XQ614SS
6M
22
8 x 1-5/8
XQ815SS
4M
24
8x2
XQ820SS
3M
22
8 x 2-1/2
XQ822SS
2.5M
23
10 x 2-1/2
XQ1022SS
2M
25
10 x 3
XQ1030SS
1.5M
23
10 x 3-1/2
XQ1031SS
1M
18
12 x 4
XQ1240SS
1M
28
305 Stainless Steel Square Trim Head, Coarse Thread, Type ‘17’
• Superior penetration through a variety of woods
Size
7 x 1-5/8
Part No.
Qty.
Lbs.*
X1QSS
5M
29
Exterior wood screws for attaching trim or rails to fences.
7 x 2-1/4
X2QSS
3M
23
7x3
X3QSS
2M
21
12
Outdoor Screws
Phillips Bugle Head, Coarse Thread, W.A.R. Coated
• Designed to work with ACQ treated lumber
• High degree of corrosion resistance
Size
6 x 1-1/4
6 x 1-5/8
6x2
8 x 2-1/2
8x3
Part No.
614CW
615CW
620CW
822CW
830CW
Qty.
8M
5M
3.5M
2.5M
2M
Lbs.*
29
22
19
22
21
• Exceeds 1,000/hr. salt spray resistance
®
Phillips Bugle Head, Coarse Thread, Dacrotized
• Exterior wood screw used in fencing, decks, patios
Size
6x1
6 x 1-1/4
6 x 1-5/8
6x2
6 x 2-1/4
8 x 2-1/2
8x3
Part No.
610CD
614CD
615CD
620CD
624CD
822CD
830CD
Qty.
10M
8M
5M
3.5M
3M
2.5M
2M
Lbs.*
30
29
23
20
20
22
21
• Exceeds 500/hr. salt spray resistance
Size
10 x 3-1/2
10 x 3-3/4
10 x 4
10 x 4-1/2
10 x 5
10 x 6
Part No.
1031D
1033D
1040D
1041D
1050D
1060D
Qty.
1M
1M
.8M
.5M
.5M
.5M
Lbs.*
17
18
16
12
13
15
®
Square Bugle Head, Coarse Thread, Dacrotized
Size
6x2
8 x 2-1/2
8x3
Part No.
620QCD
822QCD
830QCD
Qty.
3.5M
2.5M
2M
Lbs.*
20
22
21
Square Bugle Head, Coarse Thread, Type ‘17’, W.A.R. Coated
Size
6 x 1-5/8
6x2
8 x 2-1/2
8x3
10 x 3-1/2
Part No.
XQ615W
XQ620W
XQ822W
XQ830W
XQ1031W
Qty.
5M
3.5M
2.5M
2M
1M
Lbs.*
22
19
22
21
18
Square Bugle Head, Coarse Thread, Zinc Yellow
• Used for low corrosion applications
Size
6 x 1-1/4
6 x 1-5/8
6x2
8 x 2-1/2
8x3
Part No.
614QCY
615QCY
620QCY
822QCY
830QCY
Qty.
8M
5M
3.5M
2.5M
2M
Lbs.*
28
22
20
22
21
• 90/hr. salt spray resistance
Ideal for interior or outdoor applications. Attaches wood to wood.
13
Outdoor Screws
Phillips Bugle Head, Coarse Thread, Zinc Yellow
Size
Part No.
Qty.
Lbs.*
6 x 3/4
606CY
15M
37
6x1
610CY
10M
30
6 x 1-1/8
611CY
10M
32
6 x 1-1/4
614CY
8M
29
6 x 1-1/2
612CY
6M
26
6 x 1-5/8
615CY
5M
23
6x2
620CY
3.5M
20
6 x 2-1/4
624CY
3M
20
7x2
720CY
3.5M
23
8 x 2-1/2
822CY
2.5M
23
8x3
830CY
2M
22
Size
Part No.
10 x 3-1/2
10 x 3-3/4
Qty.
Lbs.*
1031SY
1M
17
1033SY
.8M
15
10 x 4
1040SY
.8M
16
10 x 4-1/2
1041SY
.5M
12
10 x 5
1050SY
.5M
13
10 x 6
1060SY
.5M
15
Star Flat Head w/Nibs, Coarse Thread, Type ‘17’, Zinc Yellow
• Star drive prevents cam out and stripping for improved driveability
• Used for moderate corrosion applications
• .0003 plating thickness
Size
Part No.
Qty.
Lbs.*
8 x 1-1/4
XT814Y
8M
38
8 x 1-5/8
XT815Y
5M
30
8x2
XT820Y
3.5M
25
9 x 2-1/2
XT922Y
2.5M
26
9x3
XT930Y
2M
24
10 x 3-1/2
XT1031Y
1M
17
10 x 4
XT1040Y
.8M
16
Star Flat Head w/Nibs, Coarse Thread, Type ‘17’, W.A.R. Coated
• Star drive prevents cam out and stripping for improved driveability
Size
Part No.
Qty.
Lbs.*
8 x 1-1/4
XT814W
8M
38
8 x 1-5/8
XT815W
5M
30
8x2
XT820W
3.5M
25
9 x 2-1/2
XT922W
2.5M
26
9x3
XT930W
2M
24
10 x 3-1/2
XT1031W
1M
17
10 x 4
XT1040W
.8M
16
14
Woodworking Screws
Phillips Flat Head Particle Board Screws, Plain and Lubed
• Asymmetrical thread pattern
• Resists material slippage during pull out and vibration
Size
• Superior holding power
Part No.
Qty.
Lbs.*
6 x 1/2
608L
25M
35
Wood screw for interior wood applications.
6 x 5/8
610L
25M
45
6 x 3/4
612L
20M
44
8 x 3/4
812L
10M
32
8x1
816L
10M
40
Phillips Flat Head Particle Board Screws, Plain and Lubed
• For cabinet work, furniture assembly
Size
Part No.
Qty.
Lbs.*
8 x 1-1/4
820L
8M
38
8 x 1-1/2
824L
6M
33
8 x 1-5/8
826L
5M
30
8 x 1-3/4
828L
4M
26
8x2
832L
3.5M
25
9 x 2-1/2
940L
2.5M
24
9x3
948L
2M
23
Square Flat Head Particle Board Screws, Plain and Lubed
Size
• Square drive prevents cam out and stripping
Part No.
Qty.
Lbs.*
8 x 3/4
812QL
10M
32
8x1
816QL
10M
40
Square Flat Head Particle Board Screws, Plain and Lubed
Size
Part No.
Qty.
Lbs.*
8 x 1-1/4
820QL
8M
38
8 x 1-1/2
824QL
6M
33
8 x 1-5/8
826QL
5M
30
8 x 1-3/4
828QL
4M
26
8x2
832QL
3.5M
25
9 x 2-1/2
940QL
2.5M
24
9x3
948QL
2M
23
15
Woodworking Screws
Phillips Flat Head w/Nibs Particle Board Screws, Black Oxide
Size
8x1
8 x 1-1/4
8 x 1-1/2
8 x 1-5/8
8 x 1-3/4
8x2
9 x 2-1/2
9x3
Part No.
816NB
820NB
824NB
826NB
828NB
832NB
940NB
948NB
Qty.
10M
8M
6M
5M
4M
3.5M
2.5M
2M
Lbs.*
40
38
33
30
26
25
24
23
Phillips Flat Head w/Nibs Particle Board Screws, Type ‘17’, Zinc Plated
• Type ‘17’ reduces wood splitting
Size
8x1
8 x 1-1/4
8 x 1-1/2
8 x 1-5/8
8 x 1-3/4
8x2
9 x 2-1/2
9x3
Part No.
X816NZ
X820NZ
X824NZ
X826NZ
X828NZ
X832NZ
X940NZ
X948NZ
Qty.
10M
8M
6M
5M
4M
3.5M
2.5M
2M
Lbs.*
40
38
33
30
26
25
24
23
• Counter sinking nibs for a flush finish
Square Flat Head w/Nibs Particle Board Screws, Type ‘17’, Zinc Plated
Size
8 x 3/4
8x1
8 x 1-1/4
8 x 1-1/2
8 x 1-5/8
8 x 1-3/4
8x2
9 x 2-1/2
9x3
Part No.
XQ812NZ
XQ816NZ
XQ820NZ
XQ824NZ
XQ826NZ
XQ828NZ
XQ832NZ
XQ940NZ
XQ948NZ
Qty.
10M
10M
8M
6M
5M
4M
3.5M
2.5M
2M
Lbs.*
32
40
38
33
30
26
25
24
23
Face Framing #7 Phillips Pan Head, Type ‘17’, Black Oxide
• For cabinet framing assembly
• Fine thread for hardwoods
Size
6-20 x 1-1/4
6-20 x 1-1/2
Part No.
XP5
XP6
Qty.
8M
7M
Lbs.*
34
34
Face Framing #7 Square Pan Head, Type ‘17’, Black Oxide
• Fine thread for hardwoods
Size
6-20 x 1-1/4
6-20 x 1-1/2
Part No.
XQ5
XQ6
Qty.
8M
7M
Lbs.*
34
34
Face Framing #7 Square Pan Head, Coarse Thread, Type ‘17’, Black Oxide
• Coarse thread for soft woods
Size
6-9 x 1-1/4
6-9 x 1-1/2
Part No.
XQ5C
XQ6C
Qty.
8M
7M
Lbs.*
33
34
16
Woodworking Screws
Phillips Oval Head Particle Board Screws, “Hinge Screw”, Plain
Size
6 x 5/8
• Used to attach hinges to cabinets and drawers
Part No.
Qty.
Lbs.*
610OL
25M
46
Phillips Oval Head Particle Board Screws, “Hinge Screw”, Zinc Plated
Size
Part No.
Qty.
Lbs.*
6 x 5/8
610OLZ
25M
46
Phillips Oval Head Particle Board Screws, “Hinge Screw”, Antique Brass
Size
Part No.
Qty.
Lbs.*
6 x 5/8
610OAB
25M
46
Phillips Oval Head Particle Board Screws, “Hinge Screw”, Bright Brass
Size
Part No.
Qty.
Lbs.*
6 x 5/8
610OBBL
25M
46
Phillips Flat Head Particle Board Screws, “Hinge Screw”, Zinc Plated
Size
• Flat head for counter-sinking
Part No.
Qty.
Lbs.*
6 x 1/2
608LZ
25M
35
6 x 5/8
610LZ
25M
45
6 x 3/4
612LZ
20M
44
Phillips Flat Head Particle Board Screws, “Hinge Screw”, Antique Brass
Size
Part No.
Qty.
Lbs.*
6 x 1/2
608AB
25M
35
6 x 5/8
610AB
25M
45
6 x 3/4
612AB
20M
44
Phillips Flat Head Particle Board Screws, “Hinge Screw”, Bright Brass
Size
Part No.
Qty.
Lbs.*
6 x 1/2
608BBL
25M
35
6 x 5/8
610BBL
25M
45
6 x 3/4
612BBL
20M
44
Draw Bolt, Joint Fastener
• For counter-top assembly
Size
1/4-20 x 3-1/2
• Adjust without special tools
Part No.
Qty.
Lbs.*
DRAW
.5M
48
Used to draw counter-tops together.
17
Pole Gripper Screws
Unslotted Indented Hi-Hex Washer Head w/Shoulder, Type S, Strong-Shield Coated
Size
• Rust/Acid Rain Protection
• ACQ Compatible
Part No.
Qty.
Lbs.*
9-15 x 1
PG916
7M
46
Attaches metal to wood. Used in roofing and siding applications.
9-15 x 1-1/2
PG924
4M
36
9-15 x 2
PG932
3M
33
9-15 x 2-1/2
PG940
1.5M
20
9-15 x 3
PG948
1.5M
24
Unslotted Indented Hi-Hex Washer Head w/Shoulder and EPDM Bonded Washer, Type S,
Strong-Shield Coated
Size
Part No.
Qty.
• ACQ Compatible
Lbs.*
9-15 x 1
PGA916
4M
34
9-15 x 1-1/2
PGA924
2.5M
27
9-15 x 2
PGA932
2M
26
9-15 x 2-1/2
PGA940
1.5M
23
9-15 x 3
PGA948
1M
18
Unslotted Indented Hi-Hex Washer Head w/Shoulder, Hi-Low Thread, Type ‘17’, Strong-Shield Coated
Size
Part No.
Qty.
Lbs.*
• ACQ Compatible
10-14 x 1
PG1016
5M
30
10-14 x 1-1/2
PG1024
3M
25
10-14 x 2
PG1032
2.5M
26
10-14 x 2-1/2
PG1040
1.5M
20
10-14 x 3
PG1048
1M
15
Unslotted Indented Hi-Hex Washer Head w/Shoulder and EPDM Bonded Washer, Hi-Low Thread, Type ‘17’,
Strong-Shield Coated
• ACQ Compatible
Size
Part No.
Qty.
Lbs.*
10-14 x 1
PGA1016
3M
25
10-14 x 1-1/2
PGA1024
2.5M
26
10-14 x 2
PGA1032
2M
24
10-14 x 2-1/2
PGA1040
1.5M
22
10-14 x 3
PGA1048
1M
17
TM
18
Concrete Screws
Slotted Indented Hex Washer Head, Hi-Low, Notched Threads, Diamond Point, Blue Ceramic Coating
Size
Part No.
Qty.
Lbs.*
Head Size
• Ceramic coating meets ASTM B-117 for salt spray corrosion
3/16 x 1-1/4
CH320
5M
41
1/4” A.F.
Attaches wood or metal to concrete, brick, cement block or masonry.
3/16 x 1-3/4
CH328
3M
32
1/4” A.F.
3/16 x 2-1/4
CH336
2.5M
32
1/4” A.F.
3/16 x 2-3/4
CH344
2M
32
1/4” A.F.
3/16 x 3-1/4
CH352
1.5M
28
1/4” A.F.
3/16 x 3-3/4
CH360
1M
21
1/4” A.F.
3/16 x 4
CH364
1M
23
1/4” A.F.
1/4 x 1-1/4
CH420
3M
36
5/16” A.F.
1/4 x 1-3/4
CH428
2M
33
5/16” A.F.
1/4 x 2-1/4
CH436
1.5M
30
5/16” A.F.
1/4 x 2-3/4
CH444
1M
25
5/16” A.F.
1/4 x 3-1/4
CH452
1M
29
5/16” A.F.
1/4 x 3-3/4
CH460
.5M
17
5/16” A.F.
1/4 x 4
CH464
.5M
18
5/16” A.F.
Phillips Flat Head, Hi-Low, Notched Threads, Diamond Point, Blue Ceramic Coating
Size
• Ceramic coating meets ASTM B-117 for salt spray corrosion
Part No.
Qty.
Lbs.*
3/16 x 1-1/4
CF320
5M
35
3/16 x 1-3/4
CF328
4M
39
3/16 x 2-1/4
CF336
2.5M
31
3/16 x 2-3/4
CF344
2M
29
3/16 x 3-1/4
CF352
1.5M
26
3/16 x 3-3/4
CF360
1M
20
3/16 x 4
CF364
1M
22
1/4 x 1-1/4
CF420
3M
37
1/4 x 1-3/4
CF428
2M
33
1/4 x 2-1/4
CF436
1.5M
31
1/4 x 2-3/4
CF444
1M
25
1/4 x 3-1/4
CF452
1M
28
1/4 x 3-3/4
CF460
.5M
17
1/4 x 4
CF464
.5M
18
Carbide Masonry Drill Bit
Size
Part No.
Qty.
5/32 x 3-1/2
MB531
25
5/32 x 4-1/2
MB541
25
5/32 x 5-1/2
MB551
25
3/16 x 3-1/2
MB331
25
3/16 x 4-1/2
MB341
25
3/16 x 5-1/2
MB351
25
19
Cement Board Screws
Phillips Wafer Head w/Nibs, Self-Drilling, Cement Board Screws, Ruspert Coating
• Ceramic coating provides protection from corrosion
Size
8-18 x 1-1/4
8-18 x 1-5/8
8-18 x 2-1/4
Part No.
CB814
CB815
CB824
Pt.
2
2
2
Qty.
5M
4M
3M
Lbs.*
29
29
30
.035 - .100
.035 - .100
.035 - .100
• Designed to work with all backer boards
• Nibs under head clamp board firmly
Drill Speed
2500 RPM
2500 RPM
2500 RPM
Attaches cement board to metal studs.
Phillips Wafer Head w/Nibs, Hi-Low, Sharp Point and Spoon Point, Cement Board Screws, Ruspert Coating
• Designed to work with all backer boards
Size
8-15 x 1-1/4
8-15 x 1-5/8
8-15 x 2-1/4
8-15 x 1-1/4
8-15 x 1-5/8
Part No.
814CB
815CB
824CB
CB814SPN
CB815SPN
Qty.
5M
4M
2.5M
5M
4M
Lbs.*
31
30
25
29
29
Attaches cement board to wood studs.
Attaches cement board to wood or light gauge metal studs.
Attaches cement board to wood or light gauge metal studs.
Phillips Flat Head w/Nibs and Wings, Self-Drilling, Fiber Board Screws, Ruspert Coating
Size
8-18 x 1-1/4
8-18 x 1-5/8
8-18 x 2-1/4
Part No.
FB814R
FB815R
FB824R
Pt.
2
2
2
Qty.
5M
4M
3M
Lbs.*
27
28
30
.035 - .100
.035 - .100
.035 - .100
• Nibs under head provide flush finish
• Wings ream hole in board preventing “jacking action”
Drill Speed
2500 RPM
2500 RPM
2500 RPM
Attaches fiber board to metal studs.
Special Application
Acoustical Eye Lag, Sharp Point and Self-Drilling, Zinc Plated
Size
1/4 x 3
1/4 x 2
1/4 x 3-1/4
S/P
S/D
S/D
Part No.
EA1
EA2
EA6
Qty.
1M
1M
1M
Lbs.*
32
19
25
Attaches drop ceiling tie wires to light gauge metal.
Attaches drop ceiling tie wires to steel.
Attaches drop ceiling tie wires to steel.
Acoustical Eye Lag, Plain
Size
1/4 x 3
1/4 x 4
1/4 x 5
Part No.
EA3
EA4
EA5
Qty.
1M
1M
1M
Lbs.*
22
33
40
Attaches drop ceiling tie wires to wood.
Lbs.*
80
Attaches drop ceiling tie wires to existing ceiling.
Acoustical Toggle Assembly, Zinc Plated
Size
1/4-20 x 4-1/4
Part No.
TOG
Qty.
.8M
Acoustical Eye Lag Driver
Size
1/4 x 3
Part No.
EAD
Star Bits
Qty.
1/ea.
Size
T-20 x 25
T-25 x 25
20
Part No.
T20C
T25C
Qty.
100
100
Lbs.*
1
1
Inches to Decimal
Inches
1/32
Decimal
Inches
.0312
Decimal
9/32
Inches
.2812
Decimal
17/32
Inches
.5312
25/32
Decimal
.7812
1/16
.0625
5/16
.312
9/16
.5625
13/16
.8125
3/32
.0937
11/32
.3437
19/32
.5937
27/32
.8437
1/8
.125
3/8
.375
5/8
.625
7/8
.875
5/32
.1562
13/32
.4062
21/32
.6562
29/32
.9062
3/16
.1875
7/16
.4375
11/16
.687
15/16
.9375
7/32
.2187
15/32
.4687
23/32
.7187
31/32
.9687
1/4
.250
1/2
.500
3/4
.750
1
1.00
Decimal
Gauges to Decimal
Gauge
Decimal
Gauge
Decimal
Gauge
Decimal
Gauge
3
.239
12
.105
21
.033
30
.0120
4
.224
13
.090
22
.030
31
.0105
5
.209
14
.075
23
.027
32
.0097
6
.194
15
.067
24
.024
33
.0090
7
.179
16
.060
25
.021
34
.0082
8
.164
17
.054
26
.018
35
.0075
9
.150
18
.048
27
.016
36
.0067
10
.135
19
.042
28
.015
37
.0064
11
.120
20
.036
29
.014
38
.0060
Drill Capacity Guideline for Self-Drilling Screws
Point
Diameter
1
1/4
.050
.018 ----- .090
.100
.150
.200
.250
.300
.350
.400
.500
.600
Drill Speed
2000
2
6
.035 ----- .090
2500
2
8
.035 ------- .100
2500
2
10
.035 -------- .110
2500
3
10
.035 ------------------------- .176
2500
3
12
.035 --------------------------------- .210
2000
3
1/4
.060 ---------------------------------- .220
1750
4
12
.125 -------------------------- .250
1500
5
12
.125 --------------------------------------------------------------------------- .500
1500
21
Test Results - Self-Drilling Screws
Self-Drilling Pullout Values (Avg. Lbs.)
Size
Point
22
20
18
16
14
12
6-20
2
Gauge:
149
277
462
571
855
1043
8-18
2
260
292
479
685
933
1533
1/8
3/16
10-16
2
267
360
534
763
1005
1606
10-16
3
261
293
487
690
941
1432
335
496
702
901
1469
2112
2668
283
333
537
737
1034
1585
2349
2911
484
679
959
1489
2371
3384
10-24
3
12-14
3
12-24
4
12-24
5
14-14
3
287
339
1/4
2017
3732
475
672
951
1486
2269
3593
3882
595
856
1114
1805
2337
4416
4885
Self-Drilling Shear Values (Avg. Lbs.)
Size
Point
22
20
18
6-20
2
Gauge (Lapped):
510
736
820
16
14
8-18
2
546
721
1031
1049
10-16
2
574
808
1173
1233
10-16
3
709
1231
1497
1508
12-14
3
749
1320
1574
1914
12-24
4
12-24
5
14-14
3
12
1/8
2040
2641
2682
1972
2622
1401
1/4
1929
1989
905
3/16
2509
2573
2738
Test Results - Drywall Screws
Drywall Screws Pullout Values (Avg. Lbs.)
Size
Description
22
20
6 x 1 - 6 x 1-5/8
Phillips Bugle A/P*
Gauge:
230
325
18
16
14
12
6x2-8x3
Phillips Bugle A/P*
166
237
6 x 7/16
Phillips Pan Head Framing A/P*
247
316
406
505
876
1050
6 x 1 - 6 x 1-5/8
Phillips Bugle S/D**
126
218
366
496
825
1004
6 x 1-7/8 - 8 x 3
6 x 7/16
Phillips Pan Head Framing S/D**
168
227
398
502
888
1050
156
227
375
547
875
1106
*A Point (Fine Thread) **Self-Drilling
Drywall Screws Shear Values (Avg. Lbs.)
Size
Description
6 x 1 - 6 x 1-5/8
Phillips Bugle A/P*
Gauged (Lapped):
22
20
532
568
6x2-8x3
Phillips Bugle A/P*
525
787
6 x 7/16
Phillips Pan Head Framing A/P*
624
747
6 x 1 - 6 x 1-5/8
444
721
18
16
966
1044
875
912
6 x 1-7/8 - 8 x 3
522
780
937
1025
6 x 7/16
Phillips Pan Head Framing S/D**
403
626
690
1047
14
12
*A Point (Fine Thread) **Self-Drilling
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
22
Coating Comparison
Coating
Black Oxide
Salt Spray *
Kesternich
24 hrs.
n/a
Application
Used indoors for dry, non-corrosive applications.
Black Phosphate
24 hrs.
n/a
Zinc
36 hrs.
n/a
Yellow Zinc
90 hrs.
n/a
Used outdoors for dry, non-corrosive applications.
Dacrotized®
500 hrs.
n/a
Used outdoors for medium corrosive applications.
1,000 hrs.
n/a
Used indoors and outdoors for high corrosive applications.
Used outdoors for high corrosive applications. ACQ compatible.
Ruspert
®
W.A.R.
1,000 hrs.
n/a
Strong-ShieldTM
1,000 hrs.
15 Cycles
Used outdoors for high corrosive applications. Acid rain protection. ACQ compatible.
410 Stainless Steel
500 hrs.
n/a
Used outdoors for medium corrosive applications. ACQ compatible.
305 Stainless Steel
1,000 hrs.
n/a
Used outdoors for high corrosive applications. ACQ compatible.
Coating Description
Coating
Description
Black Oxide
A conversion coating used to add mild corrosion resistance and for appearance.
Black Phosphate
A conversion coating used to add mild corrosion resistance and for lubricity.
Zinc
A plating that is applied electrically to fasteners that prevents oxidation of steel by forming a protective barrier.
Yellow Zinc
A plating that is applied electrically to fasteners that prevents oxidation of steel by forming a protective barrier.
Dacrotized
An immersion zinc flake/chromate dispersion coating with medium corrosion protection.
Ruspert®
A high-grade metal surface processing technology that prevents corrosion. The coating system consists of three layers: a metallic zinc layer, a high-grade
anti-corrosion chemical conversion film, and a baked ceramic surface coating.
W.A.R.
A high-grade metal surface processing technology that prevents corrosion. The coating system constists of three layers: a metallic zinc layer, a hex-chromium
or trivalent chromate passivation, and a high-grade anti-corrosion chemical conversion film.
Strong-ShieldTM
A high-grade metal surface processing technology that prevents corrosion. The coating system constists of four layers: a metallic zinc layer, a hex-chromium
passivation, a layer of functional nano coating used as a sealer, and a high-grade anti-corrosion chemical conversion film.
410 Stainless Steel
A low-carbon grade of hardenable stainless steel. Good corrosion resistence in mild atmospheres.
305 Stainless Steel
A nickel-chromium grade of stainless steel that has a high resistance to corrosion.
®
*(Tested in accordance with the American Society of Testing Materials - ASTM B 117)
23
Self-Drilling • Drywall • Needle Point
Pole Gripper • Concrete • Particle Board
Cement Board • Outdoor/Deck • Acoustical
NN.
A. Hex Washer Head Steel or 410 Stainless #1, #2, #3
B. Hex Washer Head Steel or 410 Stainless #4, #5
C. Hex Washer Head w/ Sealing Washer
D. Pan Head - Steel or 410 Stainless - Phillips or Square
E. Flat Head - Steel or 410 Stainless
F. Oval Head
G. Modified Truss Head - Steel or 410 Stainless
H. Flat Truss Head
I. Wafer Head - Phillips or Star Drive
J. Pancake Head
K. Bugle Head - Black, Zinc, Ruspert
L. Trim Head - Phillips or Square - Black, Zinc
M. Pan Head - Framing
N. Flat Head - Reamer w/Wings - Zinc, W.A.R.
O. Wafer Head - Reamer w/Wings
P. Oval Head “Sems” w/Finishing Washer
Self-Piercing Screws - Needle Point
Q. Slot Hex Washer Head
R. Slot Hex Washer Head w/Sealing Washer
Cement Board Screws
S. Wafer Head - Drill Point
T. Wafer Head - Spoon Point or Hi-Low S/P
U. Flat Head - Fiber Board Drill Point w/Wings and Nibs
Drywall Screws - Sharp Point
V. Bugle Head - Fine Thread Black
W. Bugle Head - Coarse Thread - Phillips or Square - Black,
Yellow, Dacro, W.A.R., 305 Stainless Steel
X. Bugle Head - Hi-Low Thread
Y. Bugle Head Laminating
Z. Trim Head - Phillips or Square Drive
AA. Modified Truss Head “K-Lath” - Black Oxide, Zinc
BB. Pan Head - Framing
CC. Pancake Head
Deck Screws
DD. Flat Head - Star Drive ‘Type 17’ w/Nibs
EE. Bugle Head - Square Drive ‘Type 17’ W.A.R. coating or
305 Stainless Steel
FF. Trim Head - Square Drive ‘Type 17’ 305 Stainless Steel
OO.
PP.
Acoustical Eye Lag
GG. Drill Point
HH. Sharp Point
Particle Board Screws
II. Flat Head Phillips or Square Drive ‘Type 17’ w/Nibs - Black, Zinc
JJ. Flat Head Hinge Screw - Ant. Br., BBL, Zinc, Plain, Black
KK. Oval Head Hinge Screw - Plain, Zinc
Cabinet Screws
LL. Pan Head - Face Framing ‘Type 17’ Fine or Coarse
Pole Gripper Screws
MM. Hex Washer Head - Sharp Point
NN. Hex Washer Head - Hi-Low ‘Type 17’
Concrete Screws
OO. Slot Hex Washer Head - Hi-Low, Notched Threads
PP. Flat Head - Hi-Low, Notched Threads
®
Strong-Point is a Registered Trademark
of Intercorp, Orange, CA 92868
Los Angeles
800.762.2004
Chicago
800.533.9669
Atlanta
800.822.9690
Dallas
800.558.7222
Portland
800.434.5606
Houston
800.558.7222
Cleveland
800.533.9669
Self-Drilling
Drywall
Needle Point
Stainless Steel
Concrete
Pole Gripper
Outdoor
Cement Board
Woodworking
Special Application
Fast. Knowledgeable. Friendly. Reliable.
Los Angeles - (800) 762-2004
641 North Poplar Street
Orange, CA 92868
Tel: (714) 744-2622
Fax: (714) 744-4672
[email protected]
Chicago - (800) 533-9669
2541 Millennium Drive
Elgin, IL 60124
Tel: (847) 841-8860
Fax: (847) 841-8875
[email protected]
Atlanta - (800) 822-9690
2160 Breckinridge Blvd.
Lawrenceville, GA 30043
Tel: (770) 326-9960
Fax: (770) 326-9996
[email protected]
Dallas - (800) 558-7222
1252 Avenue T
Grand Prairie, TX 75050
Tel: (972) 602-1080
Fax: (972) 602-1117
[email protected]
Same Day Shipping
From All Seven Locations!
Portland - (800) 434-5606
9494 SW Tualatin-Sherwood Rd.
Tualatin, OR 97062
Tel: (503) 783-5550
Fax: (503) 783-5555
[email protected]
Houston - (800) 558-7222
3701 Yale Street
Houston, TX 77018
Tel: (713) 692-1167
Fax: (713) 692-1274
[email protected]
Cleveland - (800) 533-9669
18450 South Miles Road
Warrensville Heights, OH 44128
Tel: (216) 750-2265
Fax: (216) 750-2266
[email protected]

- Olmar Supply

Transcription

Similar documents

Misc. User Notes: - Magnepan Users Group

10-The Skeuomorph Skew

- Celeste

Elemental Autumn

Recycling Bloopers

What is It Made Of?

roma termit OKISOP AN roma termit CORRUGA

YOB 05 1sht - Metal Blade Records FTP

Sym 07 1Sht - Metal Blade Records FTP

metal edge