View Conference Booklet

2011 Postsecondary
Summer Conference
Career and Technical Education
Energizing Mississippi:
Moving on Up to Credentials
Thursday, AUGUST 4
HINDS COMMUNITY COLLEGE RANKIN CAMPUS
CLYDE MUSE CENTEr
REGISTRATION AND CONTINENTAL BREAKFAST Clyde Muse Center Lobby
9:00 am to 10:00 am
Opening General Session
10:00 am to 10:45 am Auditorium Floor & Upper Balcony
Opening Remarks EMCEE Dr. Shawn Mackey, MCCB Associate Executive Director for
Workforce & CTE
Welcome from Hinds Community College Dr. Clyde Muse, President Hinds Community College
Mississippi Community College Board Update Dr. Debra West, MCCB Deputy Executive Director
Mississippi Department of Education Update Jean Massey, MDE Associate Superintendent
Thank You Sponsors & Exhibitors & Introduction of Ingalls, Platinum Sponsor Dr. Shawn Mackey
Remarks from Platinum Sponsor Ingalls Mr. Jeff Allman
Conference Overview Dr. Shawn Mackey
Morning Breakout Sessions
10:45 a.m. – 11:45 a.m.
GOING FOR GOLD:
BEING WORK-READY Auditorium
Presenter: Mitch Rosin, Editorial Director McGraw Hill Education
Facilitators: Dexter Holloway, MCCB; Dwight Myrick, Holmes Community College; Christi
Gregory, Mississippi Delta Community College; Sue Powell, Hinds Community College
What does it mean to be “work-ready?” Increasingly the answer to this question can be found
through contextualized instruction and career readiness and industry specific certificates. This session will address the shift in the job market, why career certification is gaining increased recognition
nationwide, and how you can prepare your learners for the certification tests. Explore how contextualized instruction and practice can help build applied workplace skills while helping learners develop a
systematic, consistent problem-solving approach for success in test-taking and real-world situations.
TECHNOLOGY TOOLS: HOW TO MAKE THEM WORK FOR YOU MR 1
Presenter: Margaret Britt, Copiah Lincoln Community College
Facilitator: Jackie Martin, Copiah Lincoln Community College
Cloud computing, social media, and digital storytelling are some of the ways that technology has
evolved to change the way we operate and how we engage with our students. In this session, participants will review some of the latest technology trends and review some free or low cost tools that
can be used in the classroom.
Takeaways:
List of free or low cost technology tools;
Knowledge of latest technology trends; and
General guidelines on how to choose the right tools.
IT’S A NEW BRAND DAY: BUILDING YOUR BRAND IN THE DAY OF THE NEW - THE
NEW ECONOMY, THE NEW BUSINESS CLIMATE, AND NEW MEDIA MR 2
Presenter: Rodney Richardson, RARE Designs
Facilitator: Gwen Smith, Pearl River Community College
Thanks to New Media, the Information Age, and the New Economy, brands are more exposed and
more stringently assessed than at any other time in history. To stand out you have to strip back to
your core and then understand how your brand is both viewed and felt by the people most important
to it. We will discuss principles that help committed brand builders do just that.
ALL YOU NEED TO KNOW ABOUT PERKINS INDICATORS MR 3
Presenter(s): Shawn Mackey, Mississippi Community College Board; Debra West, Mississippi
Community College Board; Gail Baldwin, Copiah Lincoln Community College; Beverly Clark, Mississippi Gulf Coast Community College
Facilitator: Shawn Mackey, Mississippi Community College Board
This interactive panel presentation will focus on what faculty need to know about all of the Perkins
Indicators. This team of postsecondary CTE professionals will provide a thorough explanation of the
indicators, how they are measured, and the impacts on programs and accountability.
WArning: HIGH VOLTAGE DEMONSTRATION
Located in theDock Area adjacent to the Auditorium
STAYIN’ ALIVE WITH HIGH VOLTAGE Dock Area
Presenters: Stephen D. Sullivan, Entergy MS Senior Safety Specialist
Facilitator: Cindy Johnson, East Mississippi Community College
“Arcs, sparks, and fireworks” will get you going when an 8,000-volt power line is grounded. Everyone will enjoy this HIGHLY ELECTRIFIED live mobile exhibition on the effects of “High Voltage”
energy. While showing the power of 8,000 volts, presenters will demonstrate the dangers and
safety of power lines in your shops, labs, and in our everyday world, especially during this severe
storm season. Questions and answers are welcomed by the industry experts.
CONSTRUCTION ED: BEST PRACTICES FOR STACKABLE CREDENTIALS
AND APPRENTICESHIP CLR 104
Panel Moderator: Mike Barkett-State Director MCEF
Panelists: Blake Warren, East Central Community College Craft Instructor; Bruce Hanson, EMCC
Community Entrepreneurial Development Facilitator-Wired Grant; Stanley Bishop, Meridian Community College Craft Instructor; Jeremy Smith, Southwest Community College Vice President
for CTE; Scott Alsobrooks, Pearl River Community College Vice President Economic and Career
Development; Chevis Necaise, Hancock Vocational Center Craft Instructor; Mike Farra, Vice
President W.G. Yates and Sons Construction; Gary Bambauer, President MCEF
Facilitator: Napoleon Jones, East Mississippi Community College
Postsecondary Career and Technical Education Instructors, Deans and Directors, and Workforce
Specialists engage in a round table discussion to share colleges’ best practices for moving their Construction Education programs to National Credentials. Mike Barkett, State Director of the Mississippi Construction Education Foundation, leads the group of experts and Commercial Contractors
sharing best practices at different Mississippi Community Colleges. This discussion focuses on
recruitment and retention of academic and career and technical education students , how to assist
students in building on their stackable National Center for Construction Education and Research
(NCCER) credentials, and the value of registered apprenticeship programs.
TEACHING ACROSS THE GENERATIONS CLR 105
Presenter: Kimberly Sallis, Ph.D.; LPC; LCIDDT; CPM Director of Psychology North Mississippi
Regional Center
Facilitator: Nan Robinson, Meridian Community College
This presentation will briefly describe the characteristics of each generation: how they learn, how
they process and take in information, what motivates them to learn, and how educators can best
teach and present information when the class is a mixture of different generations.
SMART ENERGY…SAVINGS TO YOU CLR 106
Presenters: Tom Davis, PE – Systems Engineer, Singing River Electric Power Association
Facilitator: Dean Belton, Mississippi Gulf Coast Community College
“How SMART is your ENERGY?” Participants will be intrigued as we watch the electric meter
change in this thought-provoking demonstration. See just how much energy savings can be obtained
with a few simple tricks. Learn the latest strategies by the energy-industry experts: how Smart Grid
technology is utilized today and where it is heading in the future; how Smart Grid technology can
save money and make more efficient use of generating resources; and how energy savings could be
maximized in the future.
ARE WE GREEN YET? CLR 108
Presenters: Tommie Broome, MGCCC Process Technology Instructor; John Poelma, MGCCC
Electronics Instrumentation Instructor; Tommy Conerly, MGCCC Process Technology Instructor
Facilitator: Brock Clark, Mississippi Gulf Coast Community College
“Are We Green Yet?” answers questions about “green” energy or “green” technology such as wind,
solar, and other alternative fuels. The presenters will cover the pros and cons of alternative fuels
along with future developments in these fields. Those who attend the session will learn that “Going
Green” means we need to get better at the ways we are using all energy today through the cleaner
use of fossil fuels, through learning more efficient uses of energy, and through better use of new
technology such as “Smart Grid.”
WHAT’S NEW WITH INVENTOR, 3D PRINTING AND GEOSPATIAL TECHNOLOGY CLR 109
Presenter: Eddie Hanebuth, Sales Manager, Technical Training Aids
Facilitator: Joyce Jenkins, Hinds Community College
This hands-on demonstration is designed to show you some of the features of Autodesk Inventor,
Stratasys 3D/rapid prototyping, and the applications of Geospatial Technology. What can you do
with Inventor and how do you point out a working model of your invention. The presenter, Eddie
Hanebuth, is the founder and president of Digital Quest, a Mississippi-based development and training-oriented company that produces GIS instructional material for educational institutions. He is a
co-author of over 15 books and he chairs the U.S. Department of Labor’s National Standard Geospatial Apprenticeship Program, the Skills USA Geospatial Competition Committee. He also runs
the SPACESTARS teacher training program in the Center of Geospatial Excellence and NASA’s
John C. Stennis Space Center. Mr. Hanebuth will share and discuss several new books he has coauthored concerning applications of Geospatial Technology.
LEAPING FROM CPAS TO NATIONAL CREDENTIALS CLR 110A
Presenter: Dr. Marilyn D. Bowen, IC3 PL Manager
Co-Presenter: Doug Ferguson, Instructional Design Specialist
Facilitator: Chad Stocks, Hinds Community College
Jump into this session to gain an overview of how National Certifications can serve as an assessment
for your program. Certifications that are aligned with the curricula and are Industry recognized could
allow your students to leap into a career. Students leave your class Workforce Ready!
Learning Outcomes:
The participants will identify benefits or hurdles of using National Certifications as program assessments.
!"#$%"#$&"%'()*##
+*,"*-'./0
Today’s bright ideas become tomorrow’s opportunities. Opportunities to live your
passion. To earn the money your talent deserves. To join a team of dedicated
professionals and make the innovative products that transform our lives.
At DreamItDoItMS.org, learn how you can make
the things that make our world better
with a career in advanced manufacturing.
Your Future is Here for the Making
!!!"# $%&'( )# * ( )'+ "*$,
TEACHING CLINICAL JUDGMENT THROUGH CLINICAL SIMULATION CLR 110B
Presenter: Paulette Hopkins, MSN, RNC, WHNPB, Associate Degree Nursing Instructor, Meridian Community College
Facilitator: Sherry Comfort, Hinds Community College
This session will present clinical simulation, as used by the Associate Degree Nursing Program at
Meridian Community College, to teach clinical reasoning and judgment. These teaching methods
can be applied to various Allied Health Programs. Learning outcomes: Upon completion of this presentation, the participant will identify methods to enhance clinical judgment in the clinical simulation lab.
Luncheon and keynote address
11:45 a.m. - 1:30 p.m.
RECOGNITION OF PLATINUM SPONSOR: THE MISSISSIPPI MANUFACTURERS
ASSOCIATION Auditorium
Emcee: Dr. Shawn Mackey, MCCB
INTRODUCTION OF KEYNOTE SPEAKER
Jay C. Moon CEcD, FM President and CEO, Mississippi Manufacturers Association
KEYNOTE ADDRESS: Building Mississippi’s 21st Century Manufacturing Talent
Pipeline - Manufacturers’ Competitive Advantage.
Speaker: Emily Stover DeRocco, President, The Manufacturing Institute
Afternoon Breakout Sessions
1:45 a.m. – 2:45 p.m.
BUILDING A CREDENTIALED MANUFACTURING TALENT POOL / IMPLEMENTING THE
NAM-ENDORSED MANUFACTURING SKILLS CERTIFICATION SYSTEM Auditorium
Presenter: Emily Stover DeRocco and Vearl Turnpaugh
Facilitator(s): Tony Tice, Itawamba Community College; Shawn Mackey, Mississippi Community
College Board; Gwen Smith, Pearl River Community College; Candace Weaver, Jones County
Junior College; John Shows, Mississippi Gulf Coast Community College; Melanie Sanders, East
Mississippi Community College; and Sherrie Cheek-Holmes Community College
This session will help community college administrators, deans, and faculty understand the processes
for integrating nationally portable, industry-recognized manufacturing skills certifications into
for-credit programs of study, aligning directly with industry’s needs and expectations. It will be an
interactive dialogue session, exploring with a successful community college implementer the policies,
processes, challenges, and promising practices for success.
SHOW ME THE MONEY: FUNDING THAT FACULTY CAN SECURE FOR THE
CTE PROGRAM! MR 1
Presenter: Melanie Groner Busby
Facilitator: Cindy Johnson, East Mississippi Community College
Learn how to search for grants for your classroom from foundations, companies, and the government. Get some pointers on how to make your grant application fundable! Grant funding can mean
the difference in getting your CTE program off the ground. To increase your chances of acquiring a
grant, come learn from an experienced grant writer that has acquired more than $6 million in grant
funds. This workshop is high energy and promises to provide you with information and tools to help
you turn your dreams into dollars.
IT’S A NEW BRAND DAY: BUILDING YOUR BRAND IN THE DAY OF THE NEW - THE
NEW ECONOMY, THE NEW BUSINESS CLIMATE, AND NEW MEDIA MR 2
Presenter: Rodney Richardson, RARE Designs
Facilitator: Rhonda Still, Northwest Community College
Thanks to New Media, the Information Age, and the New Economy, brands are more exposed and
more stringently assessed than at any other time in history. To stand out you have to strip back to
your core and then understand how your brand is both viewed and felt by the people most important
to it. We’ll discuss principles that help committed brand builders do just that.
“A FEELING LIKE NO OTHER” CREATING A CUSTOMER SERVICE EXPERIENCE MR 3
Presenter: Jenifer Doby-Freridge, MGCCC Alumni Relations Coordinator
Facilitator: Aurelia Gayden, Southwest Mississippi Community College
Tips on creating a customer service experience for your students while preparing them for careers in
the service industry. Teaching students how to provide “A Feeling Like No Other” for every customer they encounter. In today’s tough economy, customer service is more important than ever.
It is important to teach students the importance of providing exceptional customer service by going
above and beyond.
BEWARE OF THE BULLY WOOLY: LEARN HOW TO CONFRONT NEGATIVE BEHAVIORS
PROFESSIONALLY AND CREATE POSITIVE CHANGE CLR 104
Presenter: Sheryl Allen, ADN Instructor at Meridian Community College
Facilitator: Ed Roberson, Mississippi Community College Board
Students and faculty are often the recipients of bullying behavior in a variety of situations, and this
bullying can hinder scholarly learning and create physical and mental stress and illnesses. Some even
learn how to survive in a hostile and negative environment by mimicking the same behaviors. Change
agents are desperately needed for the future of the education so that we can stop the negativity and
move toward positive growth and development personally and professionally. In this session we will
define bullying and learn how to recognize the behaviors. Participants will also learn how to confront
the negative behaviors professionally and create change for excellence in education.
CONCEPT LINKING: AN APPLIED STRATEGY TO INCREASE ACHIEVEMENT CLR 110A
Presenter: Janice Fortenberry
Facilitator: Stephanie Price, Holmes Community College
Students often enter community college Allied Health classes and the prerequisite classes have only
taught them how to pass tests by rote memorization, not through thinking and applying the learning
to complex problems. Allied Health Ready offers an innovative approach that allows the instructor
to help students master and actually learn content-rich course materials and learn critical thinking skills. Developed by Janice Fortenberry, Allied Health Ready, LLC, uses “concept linking” to
increase student retention, recall, and application of learned principles to tests. Data collected over
four semesters shows that incorporating concept linking into lectures can improve student success
rates on application-oriented tests by an average of 15%. This thought-provoking seminar illustrates
the basic tenets of concept linking and how it can be applied to Allied Health course content.
TEACHING ACROSS THE GENERATIONS CLR 106
Presenter: Dr. Kim Sallis
Facilitator: Patsy Gardner, Northwest Mississippi Community College
This presentation will briefly describe the characteristics of each generation: how they learn, how
they process and take in information, what motivates them to learn, and how educators can best
teach and present information when the class is a mixture of different generations.
REACHING THE NON-TRADITIONAL STUDENT IN NON-TRADITIONAL WAYS CLR 108
Presenter: Shane Brown
Facilitator: Kelly Trahan, Hinds Community College
This session will help you understand the needs, aspirations, challenges, and fears of the adult or
non-traditional student. You will discover the major socio-economic reasons for their reluctance
to continue their education and how to better handle the student who many times is thinking of
returning because of a crisis (divorce, economy, etc).
WORK-BASED LEARNING BEST PRACTICES:
STRATEGIES THAT WORK CLR 109
Presenter: Linda Gates, Director of Job Placement/Work-based Learning & Military Liaison, East
Mississippi Community College
Panel Members: Chris Harris, WBL Coordinator, Athletic Director, and HR, ECCC; Edie Irvin,
Senior Coordinator, Cooperative Education, Career Center, MSU; James Williams, VP for Workforce Services and Community Development, ICC
Facilitator: Joe Johnson, Hinds Community College
Work-Based Learning (WBL) can have a very positive impact on colleges’ Career/Technical/Academic Programs and Workforce Services. When properly implemented, WBL can enhance performance measures, including recruitment, retention, job placement, wages, and advanced degrees.
With budget cuts and reorganizations, individuals responsible for community colleges’ WBL programs find themselves responsible for a wide array of job duties. Come learn from some of Mississippi‘s WBL professionals and their partners as they share ideas, strategies, and best practices for
maintaining successful WBL programs with the realities of today’s work environment. Don’t miss
out on this outstanding opportunity to ask questions, network, and learn from your peers. Attendees will leave with handouts, activities, resources, and other information. By building a strong team,
we can continue to demonstrate the value of WBL in our districts and throughout the state.
A World Leader in Quality of Daily Life Solutions
Terry L. Woodard, District Manager
[email protected]
601-278-9422 - Office
601-898-2133 - Fax
www.SodexoUSA.com
Join the fight against hunger:
www.helpstophunger.org
THE RCU
Research and Curriculum Unit
Education that's about empowering students to achieve their full potential.
Education that’s about ensuring bright futures.
Education that’s about connecting academics to real-world success.
THE RCU
Education that's about Jobs
Whether the clients are students, teachers, or business professionals, we prepare them for the future. The RCU offers many
unique services for the state of Mississippi, and beyond. We offer nationally recognized curriculum development, research and
assessment, online training, and professional development are a few of the concentrations of RCU personnel. The Pathway to
Success program is poised to reenergize and rebrand education as we know it for the students of Mississippi. We are
constantly researching, proposing, and launching programs that benefit the future of Mississippi through education.
CYBERBULLYING, CYBER SAFETY, AND CYBER CITIZENSHIP CLR 110A
Presenter: Craig Jackson RCU
Facilitator: Ed Roberson, Mississippi Community College Board
Bullies have always been a problem for schools and the public in general. Cyberspace is no different because cyberbullies can take on more forms and do more damage than traditional bullies. This
presentation will discuss the growing trend of cyberbullying, how social media fits in the equation,
and ways to prevent cyberbullying. The presentation will also cover basic cyber safety and cyber
nettiquette and will identify resources you can use to help put an end to cyberbullying.
OVERCOMING TECHNO FRIGHT: FINDING REAL EDUCATIONAL USES FOR
THE IPAD CLR 110B
Presenter: Terry Pollard
Facilitator: Laura Bigbee, Holmes Community College
(iPad 1 or iPad 2 will be required)
Note: This hands on session focuses exclusively on downloading applications and creating content
with an iPad. iPads will not be provided. To fully engage and participate in the session, you will need
an iPad with access to the iTunes Store for downloads.
In this workshop, participants will learn of an iPad app framework tailored for teaching and learning.
Many of the apps in this classification framework will be demonstrated for the group, with an opportunity for several hands-on activities with a select few apps. An iPad 1 or 2 will be required.
The presenter will also discuss how content can be created on the iPad in new and innovative ways.
Free- and commercial-based software that enable faculty to develop and distribute their own eBook
content will also be discussed and demonstrated.
Attendees will also learn about the iPad as an accessible device, including online resources that
extend the usefulness of the device for the sight- and hearing-impaired.
Participants will be encouraged to share their own institution’s experiences with mobile learning
initiatives.
Participants will :
Learn about how to compartmentalize apps into education “buckets” from the thousands of apps available in the App store,
Learn about options for creating their own content for distribution on an iPad,
Learn about the iPad as an accessible device, including how to turn on speech con-
trols, sight controls, and more,
Be encouraged to share their own experiences with mobile learning initiatives on their campus.
REFreshments and door prize giveaway
BREAK/REFRESHMENTS Auditorium
2:45 pm – 3:00 pm
DOOR PRIZE GIVEAWAYS Auditorium
3:00 pm – 3:30 pm
Emcee: Dr. Shawn Mackey
BIOS
Sheryl Allen is an ADN instructor at Meridian Community College. She worked at Rush Health
Systems in Meridian for five years before coming to MCC. At Rush, Sheryl served as Registered
Staff Nurse, Trauma Nurse Coordinator, Nurse Recruiter, American Heath Association Coordinator, and Director of Nursing Education. Sheryl has also worked at Anderson Regional Hospital as
an ICU/CRU Staff Nurse, at Riley Hospital as the Emergency Room Staff Nurse, and at St. Dominic Hospital as a Critical Care Float Nurse. She holds memberships in Sigma Theta Tau, Phi Kappa
Phi, MS Nurses Association, American Nurses Association, Mississippi Organization for Associate
Degree Nurses, National Association for Associate Degree Nurses, National League of Nurses, and
Association of Critical Care Nurses. One of Sheryl’s publications is “The Revolution of Nursing
Pedagogy: A Transformational Assessment Process Teaching and Learning in Nursing.”
Jeff Allman is the Director of Operations Training and Workforce Management for Ingalls Shipbuilding in Pascagoula. In this capacity, Jeff leads the effort to develop and manage the workforce
for the largest private employer in Mississippi. After beginning his career in shipbuilding in 1990,
Jeff has worked in many phases of the shipbuilding industry, including as a craftsman, business
administrator, and human resources manager. His current duties include the implementation of the
manning strategy for the sector. Also, Jeff manages the effort to train craft workers which includes
Apprenticeship, skill upgrade training, continuing education, after-hour programs, secondary/
post secondary vocational programs, and Waterfront and Engineering Co-op programs. He holds
a bachelor’s degree in business from the University of Southern Mississippi and a master’s in business administration from William Carey College. He is a member of Southeastern Employment and
Training Association and The American Society for Training and Development. Jeff is a resident of
Gautier, Mississippi; he enjoys traveling and golf and is the proud father of twin daughters, Addison
and Lauren, age 5.
Gail Baldwin is Dean of Career, Technical and Workforce Education at Copiah-Lincoln Community
College. Gail received a B.S. from Auburn University, a M.S. from the University of Southern Mississippi, and a PhD from Jackson State University. Gail also has additional studies at William Carey
University. Gail taught secondary education for 15 years before moving to Copiah-Lincoln Com-
munity College. She has also taught Child Development Technology and worked as Assistant Dean
of Career-Technical Education. Gail is active in church and community activities as well as businessand industry- related activities to promote economic development.
Mike Barkett is a graduate of Centenary College in Shreveport, LA, where he earned his bachelor’s
degree. He has a master’s degree in administration and is working toward his doctorate in education. He has owned and operated his own sporting goods business. Mike spent 25 years in education
serving as Business Manager, Teacher, Administrator, Athletic Director, and Head Baseball Coach at
St. Andrew’s Episcopal School. He has spent the last nine years working with the Mississippi Construction Education Foundation where he now serves as the State Director of Education and Training. His responsibilities include overseeing the School to Career Program, the Adult Craft Apprenticeship Training Program, and the three Area Directors, who cover the entire state, working with
the Mississippi State Department of Education in implementing the NCCER Contren® Learning
Series Curriculum in the Career and Technical Centers, where they work closely with the Directors
and Instructors at the different centers in the State. He has developed close ties with the nine trade
associations that comprise the Board of Director’s for the MCEF. He also serves as both a certified
Master Trainer and Ambassador for the National Center for Construction Education and Research
(NCCER). Mike is married to the former Linda Simpson of Gulfport, and they have a 23-year-old
daughter, Katherine, who is a graduate of the University of Mississippi. He also serves as an elder at
Lakeland Presbyterian Church in Brandon and president of Actor’s Playhouse, a theater formed for
youth and young adults.
Marilyn D. Bowen, serving public education in Mississippi for more than 15 years, is the RCU’s professional learning manager, researching and developing innovative programs in both face-to-face and
online pedagogy and learning. She is the developer and leader of a rigorous C.O.O.L. certification
program for instructors desiring to become highly qualified to teach online. She provides oversight
for all RCU online professional learning opportunities, as well as teacher endorsement trainings. Her
education includes a Doctorate in Educational Technology, and Master’s and Bachelor’s degrees in
Elementary Education.
Margaret Britt is a member of the Computer Science/Mathematics Department at Copiah-Lincoln
Community College where she teaches introductory level computer classes. In addition to teaching for Co-Lin, she currently teaches the History and Philosophy of Vocational Education online for
Mississippi State University (VIP). She also continues to provide faculty training for the college and
its district. During the summer 2009, she attended and presented at Blackboard World in Washington, DC, and July of this year she attended the Blackboard World Conference in Las Vegas, NV.
Margaret was recently selected as a Course Technology Innovative Instructor (CTI2). This honor has
been given to twelve instructors across the nation who are leaders in the use of technology in the
classroom. In addition, she is a Cengage SAM Power Technology User providing training for SAM
software users across the southeastern part of the country. She is married to Gene Britt who is the
basketball coach at Loyd Star Attendance Center, and they have two sons and one grandson, Preston. Their oldest son, Kyle, is a teacher at Petal High School and also teaches adjunct for Co-Lin—
Simpson Campus. Their youngest son, Russ, teaches and coaches Junior High Football at Alexander
Junior High and is the Strength Coach at Brookhaven High School.
Tommie Ann Broome teaches Process Operations Technology at Mississippi Gulf Coast Community
College. She worked for Chevron Pascagoula Refinery for 23 years as a Process Operator with over
10 years of her career in the Training Department for the Refinery. Tommie Ann retired in 2003
and accepted the position as instructor for the Process Operations Technology Program. In 2008
she was named CAPT Instructor of the Year.
Shane Brown is the adult recruiter at Hinds Community College and an adjunct instructor of Old
and New Testament Survey. He has a BA in Theology and an MA in Christian Education. Over the
years he has held positions as a high school teacher, principal, and chaplain at the MS state hospital
(all three very similar…lol). He is also currently the pastor of Turning Pointe Church on the reservoir.
Melanie Groner-Busby has been a grant writer for 9 years and has won over $6 million in grant
funds. She is a former high school math teacher and guidance counselor. She has owned her own
consulting firm for 6 years. She is a graduate of Mississippi State University with a specialist degree
and is a national board certified school counselor.
Beverly S. Clark is the Assistant Dean of Career Technical Instruction at Mississippi Gulf Coast
Community College, Jefferson Davis Campus. She has also taught and served as department chair
in the Business and Office Technology Department at MGCCC and taught business education at
St. Martin High School. Dr. Clark is an active member of several educational organizations and
holds degrees from the University of Mississippi, William Carey University, and Mississippi State
University.
Tommy Conerly is a Process Operations Technology Instructor at Mississippi Gulf Coast Community College, where he has taught for the past 5 years. He has 30 years industrial experience in oil
and gas production and refining. Tommy retired from Chevron Corporation as an operations production supervisor. He graduated from the University of Southern Mississippi with a BS degree in Industrial Management. Tommy has varied experience in industrial training and OSHA’s Process Safety
Management (PSM). He is a member of the Gulf Coast Process Technology Alliance where he
currently serves on the Curriculum and Education Committee. Tommy is also an authorized OSHA
Outreach Trainer for General Industry.
Tom Davis graduated from George County High School and went on to graduate from Mississippi
State University with a BS in Electrical Engineering. He attends Agricola Baptist Church in Agricola, MS. He has been employed by Singing River Electric Power Association in Lucedale, MS, for
23.5 years. Currently a System Engineer, Mr. Davis’ experience includes: system planning, distribution system modeling, coordination studies, arc flash studies, GIS mapping, outage management
system, substation construction, and maintenance.
Emily Stover DeRocco is president of The Manufacturing Institute and its new National Center for
the American Workforce and Senior Vice President of the National Association of Manufacturers.
Elected by The Manufacturing Institute’s Board of Trustees on March 5, 2008, she will oversee the
education and research arm of the NAM and the design and operations of the new national center
dedicated to fostering a new generation of manufacturing workers for the 21st century.
Nominated by President Bush and confirmed by the U.S. Senate as the Assistant Secretary of Labor
in 2001, DeRocco was responsible for managing a $10 billion investment in the nation’s workforce in
her previous position. She created and implemented regional economic development initiatives in 39
regions across the nation during her tenure, using talent development strategies to drive competitive
advantage for America’s businesses. Her responsibilities included implementation of Trade Adjustment Assistance for displaced workers, alternative educational pathways for the nation’s youth, the
permanent and temporary foreign labor certification programs for employment-based immigration,
the national apprenticeship program, and workforce development programs nationwide. She created
and led Presidential initiatives to align education, economic development, and workforce development investments and to increase the capacity of the nation’s community college system.
During her tenure with the Labor Department, DeRocco chaired or vice-chaired numerous boards
and commissions, including the Education and Workforce Committee of the Secretary of Education’s Commission on the Future of Higher Education, the Education and Workforce Committee
of the Department of Commerce’s Interagency Working Group on Manufacturing, and the President’s Committee on Economic Adjustment for the Defense Department’s Base Realignment and
Adjustment Commission. She also was active on the National Advisory Board of the Manufacturing
Extension Partnership.
DeRocco has represented the United States and led delegations in international forums including
the G-8 Labor Ministerials, the Organization for Economic Cooperation and Development, the
Western Hemisphere Competitiveness Forum, U.S.-Canada Policy Forums, and U.S.-EU Dialogues.
DeRocco also brings over 10 years of private sector experience in managing a national non-profit
organization and prior federal government experience at the Departments of Energy and Interior,
the Federal Energy Regulatory Commission and the Interstate Commerce Commission.
DeRocco is a proud graduate of The Pennsylvania State University and received her Juris Doctor
degree from the Georgetown Law Center.
Doug Ferguson is an instructional design specialist in the Manufacturing and Construction clusters. He worked for more than 15 years in the manufacturing environment, which included casting,
metal forming, coating, and assembly. He also was an agricultural land surveyor for seven years and
taught in Mississippi’s community college system for five years in electrical/electronic technology.
With educational experience of more than nine years in career and technical education, he earned a
Career Certificate in Industrial Electricity and an Associate of Applied Science Degree in Electronic
Technology from Mississippi Delta Community College. He also holds a Bachelor of Science Degree
in Industrial Technology and a Master of Science Degree in Technology from Mississippi State University. Currently, he is pursuing a doctorate in instructional systems and workforce development,
with a minor in community college leadership, at Mississippi State.
Ferguson’s industrial credentials include certifications in Master Standard Data (MST), Certified
Fiber Optic Technician (CFOT), Certified Fiber Optic Specialist in Testing (CFOS/T), and Certified
Fiber Optic Specialist in Splicing (CFOS/S). Educational certifications include Electrical Instructor
in the National Center for Construction Education and Research (NCCER), Internet and Computing Core Certification (IC3), and Interactive Competency Assessment of Technology for Teachers Certification (iCAT).
Jenifer Doby Freridge is a marketing expert with extensive experience in training trainers how to
teach customer service soft skills. She completed her Associate of Arts and Associate of Applied
Science degree at Mississippi Gulf Coast Community College (MGCCC). She also holds a Bachelor of Science in Marketing and a Master of Science in Business Administration from William Carey
University. After serving ten years at the Beau Rivage as the Convention Services Manager, Jenifer
currently serves as MGCCC’s Coordinator of Alumni Relations. She is married to Cory Freridge
and has two children, Brandon and Cayla. Other accomplishments include serving as the President
of the MGCCC Jackson County Alumni Association and member of the Junior Auxillary.
Janice Fortenberry is a graduate of Mississippi College, earning both a Bachelor of Science degree
in Chemistry and a Master of Combined Sciences in Biochemistry and Cell Physiology in 1974
and 1976, respectively. She has completed additional graduate work at Mississippi State University,
University of Mississippi Medical Center, Bloomsburg University, Chaminade University in Honolulu, Hawaii, the University of South Alabama, and Oklahoma State University. She was employed at
Meridian Community College for 19 years where she taught anatomy and physiology and was then
promoted to Director of the Media Center in 1986. Janice also wrote federal grants at MCC. In
1995 Janice and her husband Larry moved to McComb, Mississippi, where she taught anatomy and
physiology at Copiah-Lincoln Community College for nine years. She concluded her 25-year career
teaching A&P at Southwest Mississippi Community College. After retiring in December 2010,
Janice founded Allied Health Ready, LLC, and now holds seminars and workshops teaching a study
and thinking skills strategy, called concept linking, to improve critical thinking skills among today’s
students. Fortenberry was named Phi Theta Kappa Outstanding Educator in 1981 and in 2004 and
was named a Community College Fellow in 1994.
Linda “L.L.” Gates serves as District Director of Job Placement/Work-based Learning and Military
Liaison at East MS Community College. Linda began her career at EMCC as the Career Development Specialist, followed by being Work-based Learning Coordinator for the Golden Triangle campus. Her WBL duties have expanded through the years to include academic, career, and technical
students throughout the district. She is also responsible for career & technical program reporting
for the Eligible Training Provider List. Linda currently serves on the MS State Workforce Investment Board, which advises the governor on workforce issues. In addition, she serves as the Work
Readiness representative for the Golden Triangle Human Resource Association and as a member of
the Columbus-Lowndes Development Link Education Committee. She recently completed Sector
Skills Academy, a year-long workforce training program.
Eddie Hanebuth is sales manager for Technical Training Aids (TTA), where he has worked for 24
years. TTA provides a wide array of products to satisfy practically all the technical training needs
of educators, from middle school through the university level. TTA is committed to the concept of
hands-on training, supported by the latest in educational technology. Eddie Hanebuth is founder
and president of Digital Quest, a Mississippi-based development and training-oriented company
that produces GIS instructional material for educational institutions. He is a co-author of over 15
books. Eddie chairs the U.S. Department of Labor’s National Standard Geospatial Apprenticeship
Program and the SkillsUSA Geospatial Competition Committee. He also runs the SPACESTARS
teacher training program in the Center of Geospatial Excellence, NASA’s John C. Stennis Space Center.
Chris Harris is the Director of Personnel, Athletics, and Work-based Learning at East Central Community College. Chris began his career in secondary education in 1978 and served as a counselor,
principal, teacher, and coach over that 10 year period. After 10 years in education, he moved into
the private industry sector and served 16 years as Human Resource Manager at La-Z-Boy South
in Newton, MS. He became acquainted with Work-based Learning while at La-Z-Boy and utilized
the program through Roger Whitlock at East Central Community College (ECCC). In 2004, he
began working as Work-based Learning Coordinator at ECCC. Since that time, he has acquired the
responsibility of Director of Personnel & Athletics along with his WBL responsibilities.
Paulette Hopkins currently serves as an ADN instructor at Meridian Community College and a
Nurse Practitioner at the Women’s Group of Meridian. Prior to this, Paulette was an instructor in
the Practical Nursing Program at MCC, worked as a Staff Nurse in Obstetrical Gynecology Unit at
Rush Foundation Hospital and worked as an office nurse for Dr. Jim Purdy, a local OBGYN. Paulette holds degrees from Meridian Community College, the University of Southern MS, the University of Mississippi and Emory University. Paulette is a member of the Mississippi Organization for
Associate Degree Nursing, Mississippi Nurse Association, Association of Women’s Health, Obstetric and Neonatal Nurses and served as a member of Meridian Community College Faculty Senate
from 2006 to 2009. Paulette has served as the simulation lab instructor at MCC since 2009 and
has been a speaker at the following conferences: Creating Futures Through Technology Conference
in February 2009, “Teaching Clinical Judgment through High Fidelity Clinical Simulation” and at
Mississippi Organization for Associate Degree Nursing State Convention in April 2009, “Clinical
Simulation: Integrating Clinical Judgment.”
Edie Irvin is a Senior Co-op Coordinator with the MSU Career Center. Her experience in education began as a Work-based Learning Coordinator with Northwest MS Community College where
she was awarded WBL Site of the Year and the MS Manufacturing Association’s Vo-Tech Educator
of the Year. Briefly leaving the education field, she gained industry experience with RR Donnelley
magazine printer in Senatobia, MS, where she earned a green belt in Six Sigma and 5S lean manufacturing practices. Returning to education, she served as the director of a Sylvan Learning Center before returning to higher education with the Career Center at MSU. Edie is one of 14 MSU
professionals selected to participate in MSU’s leadership program, LEAP, Leadership Experience
for Aspiring Professionals. She is active in community leadership roles including president of MSU
Women’s Club and the Kappa Delta Sorority Alumnae Chapter, and CAB advisor for the MSU KD
chapter.
Craig Jackson has worked in the arena of video production, Web design, and e-learning development
for nearly 30 years. As a video producer, he shot, voiced over, and edited several hundred industryspecific, customized training videos, and he was responsible for introducing non-linear digital editing to his organization. He moved into the e-learning area to enable the merging of manual-based,
video-based, and Web-based content into e-learning modules. He has produced over 100 e-learning
modules for business and industry.
Jackson has a Bachelor of Science degree in Broadcast Journalism from the University of Southern
Mississippi. He has spoken on the subject of e-learning and Web 2.0 tools at more than 20 local,
state, national, and international conferences and webinars. A member of ASTD, The E-learning
Guild, and MECA, he has authored a publication titled DISK: The Digital Immigrant’s Survival Kit.
Shawn Mackey is a three time graduate of Delta State University with a Bachelor of Science degree
in Criminal Justice (1997), a Bachelor of Arts in Psychology (1997), and a master’s degree in Social
Science Education (2000). Dr. Mackey received his Doctor of Education degree from the University of Memphis in the area of Higher Education Administration (2008). He has worked in nonprofit for eight years and in higher education for nine years, teaching and serving as Assistant Dean
of Career Technical Education at Coahoma Community College. Dr. Mackey presently serves as
the Associate Executive Director for Workforce, Career and Technical Education for the Mississippi
Community College Board. Dr. Mackey recently started his own consulting/speaking company,
Mackey Training & Consulting, Inc. MTCI is geared toward professional development through seminars and speaking on a variety of topics to include: Diversity, Career/Soft Skills, Transitioning from
High School to College, Leadership, Effective Teaching Skills, Sexual Harassment, Motivation, and
Youth Development to name a few. MTCI is especially proud of the work performed as an external
program evaluator for organizations.
Jean Massey has worked at the Mississippi Department of Education (MDE) since January of
2008. At MDE, she has been Director of Accreditation, assisted with Conservatorship and School
Improvement efforts, and is currently serving as Associate Superintendent for the Office of Career
and Technical Education. Jean has worked in education for over 25 years as a teacher, assistant
principal, and high school principal. She completed her undergraduate work at Hinds Community
College, Mississippi State University, and Belhaven University and graduate work at Jackson State
University and Mississippi College. She is currently completing her doctoral degree at Mississippi
State University. Jean was the Mississippi 2002 Met Life Principal of the year for the National
Association of Secondary School Principals and the 2003 Administrator of the Year for the State
of Mississippi. She serves on the Millsaps Principals’ Institute Advisory Board and numerous other
committees and boards both locally and nationally.
Jay C. Moon, CEcD, FM is the President and CEO of the Mississippi Manufacturers Association,
the largest and most influential voice for Mississippi manufacturers. The Association represents
more than 2,200 manufacturers and associated members. As President of the MMA, Jay worked
with Governor Barbour, the Mississippi legislature, and other business leaders to enact landmark
civil justice reform. Jay helped to develop and pass Momentum Mississippi, one of the most comprehensive improvements to Mississippi’s business incentive offerings, and other incentive packages
such as Viking, Baxter, Northrop Grumman and Howard Industries, were also made possible through
Jay’s leadership. Jay has over twenty-five years of professional economic development experience
in site development, business retention, strategic plan development, financial incentive creation and
marketing. Prior to joining the MMA, Jay served as the Deputy Director/Chief Operating Officer
and Director for International Development with the Mississippi Development Authority. Jay is well
known throughout the state and nation for his progressive approach to economic development and
his leadership capabilities. He is currently the Vice Chairman of the International Economic Development Council, the largest economic development organization in the world. Jay has also been
designated by the IEDC as a Fellow Member. Jay is a former President of the National Association
of State Development Agencies. He is a graduate of the Economic Development Institute where he
currently serves as an instructor on international trade, marketing, and ethics. Jay is also an instructor for the EDI/IEDC program in Mexico. Jay is a member of the Executive Board with the University of Oklahoma’s Economic Development Institute and is responsible for international programs
and special projects. Jay is the chairman of the Mississippi Manufacturing Extension Partnership and
a board member with the Mississippi Intermodal Council and the Mississippians for Economic Progress. He is the vice chairman and board member with the State of Mississippi Workforce Investment
Board and the Southern Global Strategies Council, a part of the Southern Growth Policies Board.
He is a board member with the Mississippi State University College of Business Advisory Board and
the Center for Manufacturing Excellence with the University of Mississippi. He was appointed by
Governor Haley Barbour to be a member of the Governor’s Comprehensive Tax Study Commission,
the National Governor’s Association Sector Strategy Policy Academy and the Mississippi Energy
Policy Institute. He is also a member of the Society of International Business Fellows. Jay has an
undergraduate degree in international relations and a master’s of public administration from the
University of Georgia.
John Poelma is an Electronics Technology and Instrumentation Electronics Instructor at Mississippi
Gulf Coast Community College (MGCCC), where he has taught since 1997. He was active duty Air
Force as a radar technician and electronics instructor for the Community College of the Air Force
(CCAF); he is now active reserve Air Force. John has an AS in Electronics Technology, CCAF, BS
in Computer Science, Park University, M.S. in Technical Occupational Education, University of
Southern Mississippi. He is currently working on his PhD in Adult Education, University of Southern
Mississippi. In 2010 John was named Instructor of the Year for MGCCC Jackson County campus.
Terry Pollard is the Director of Training and Professional Development for the Mississippi Community College Board. In this capacity, he coordinates training and professional development activity
for faculty and administrators in the Mississippi Virtual Community College. He holds various online
certifications, has spoken nationally on Mississippi’s burgeoning professional development program,
and has been closely studying the evolution of tablet devices and their implications for learning.
Rodney Richardson is the founder of RARE, purveyor of GRIT, and urban rehabilitator of The
Bakery Building. Rodney combines raw instincts with in-the-trenches experiences to illuminate the
shadowy, often misguided, and misunderstood process of building a great brand. As an acclaimed
branding consultant, he’s led the charge for some of the nation’s and region’s finest university and
athletic brands, including Florida State University, University of Michigan, University of Oregon,
University of Connecticut, Southern Miss, Tennessee-Chattanooga, and Belhaven, as well as the
brands of many NBA, NFL, MLS, and NHL teams including the San Francisco 49ers, the Houston
Texans, the Portland Timbers, and the Memphis Grizzlies.
How did he master his craft? Easy, he cut his teeth on one of the world’s biggest, most dynamic
brands – Nike. Rising from Design Assist to Global Design Leader for Nike Basketball, he served as
the brand architect for Nike’s global basketball presence, including some notable identities within
the NBA, such as the Toronto Raptors, the Los Angeles Lakers, the Portland Trailblazers, the Dallas
Mavericks, and the Miami Heat.
RARE is an independent brand-building consultancy founded by Rodney in 1999, and provides
a range of services, from brand auditing and assessment to brand development and expression to
corporate training and speaking. RedDirtGRIT is a leadership training and development platform,
focusing on both brand and individual character attributes. GRIT services include corporate training
and speaking.
Mitch Rosin is an Editorial Director with McGraw-Hill Education. He has earned a Master of Arts in
Special Education from New York University, a Master of Science in Curriculum Design and Development from Western Connecticut State University, and a Master of Science in International Public
Service from DePaul University. He taught public school for many years and now manages the Adult
Education and Workforce divisions of McGraw-Hill’s Applied, College and Career Readiness division.
Kimberly Sallis received a BA in Psychology, a Master of Education, and a PhD in Educational
Psychology from the University of Mississippi. She is a Licensed Professional Counselor in the state
of Mississippi. She is currently the Director of Psychology at the North Mississippi Regional Center
in Oxford, MS. She has been employed by the NMRC for 22 ½ years. Her duties there include
training, developing presentations and training modules, and supervising and managing the psychology department. In addition, she has served as an adjunct professor for the University of Mississippi
in the departments of Psychology and Counselor Education. Classes taught include Introduction
to Psychology, Abnormal Psychology, Social Psychology, Introduction to Intellectual and Developmental Disabilities, Assessment in Counseling, Community Counseling, and Supervision.
Stephen D. Sullivan is the Senior Safety Specialist for Entergy Mississippi. With 30 years of experience with Entergy, Mr. Sullivan is an expert in his field. His experience brings vast knowledge of the
electric lineman, company training, and safety specialist.
Vearl Turnpaugh is currently the Assistant Vice President for Career and Technical Programs with
Ivy Tech Community College. In this role, he acts as Statewide Administrator for the School of
Applied Science and Engineering Technology and also the School of Technology at Ivy Tech. Vearl is
responsible for coordinating the overall development of the College’s career and technical programs
in collaboration with employers, faculty, program chairs, deans, vice chancellors and other academic
administrators. He is responsible for identifying the existing and emerging market training needs
of Indiana Manufacturers and the development of educational programs resulting in a qualified
Indiana workforce focused and trained to meet the technical skill needs of high demand/high wage
jobs. Vearl also leads the NAM Endorsed Skills Certification grant effort at Ivy Tech which seeks
to embed critical national certifications into manufacturing programs. In addition to this current
position, Vearl has worked at Ivy Tech for 21 years as an Associate Professor, Division Chair, Department Head, and Industrial Training Instructor. Vearl holds a MS in Industrial Technology and BS in
Computer Integrated Manufacturing Technology from Purdue University. Ivy Tech Community
College is the state’s largest public postsecondary institution and the nation’s largest singly accredited statewide community college system serving nearly 200,000 students annually. Ivy Tech has
campuses throughout Indiana. It serves as the state’s engine of workforce development, offering
affordable degree programs and training that are aligned with the needs of its community along with
courses and programs that transfer to other colleges and universities in Indiana. It is accredited by
the Higher Learning Commission and a member of the North Central Association.
Debra West is the Deputy Executive Director for Programs and Accountability at the Mississippi
Mississippi Community College Board. Prior to accepting that position in December 2009, she
served the agency as Associate Executive Director for Workforce, Career and Technical Education.
Before moving to Mississippi in 2005, Debra spent a combined thirteen years in various administrative capacities at two community colleges in Arkansas and served as an adjunct faculty member at
the University of Memphis and Christian Brothers University (also in Memphis). Debra holds an
Associate of Arts degree from East Arkansas Community College, a Bachelor of Science in Physical
Science and a Master of Science in Physical Geography from the University of Memphis, and a PhD
in Community College Leadership from Mississippi State University. She is a member of Phi Kappa
Phi. Debra serves on various advisory boards and taskforces related to workforce and economic
development in Mississippi. She is also a founding member of the Mississippi Association on Higher
Education and Disability.
James Williams is the Vice President of Economic and Community Services at Itawamba Community College. The team James leads provides the non-credit training and community service programs for ICC. His team has over 70 training contracts annually with employers in Northeast MS.
James, along with others from ICC, EMCC, NECC, and NWCC, helped create the Mississippi
Corridor Consortium (MCC), a group dedicated to delivering enhanced and expanded workforce
services to their districts. James continues to be a strong leader of MCC. He has over 23 years
experience in the community college system. Prior to coming to Itawamba Community College in
September of 2002, he was the vice president of a regional construction and development company. James has a BA and MBA in Business from Southeastern Louisiana University.
Thanks!
Special Thanks to Hinds Community College for CoHosting the 2011 PS CTE Summer Conference on their
Rankin Campus
Special Thank You to the members of the 2011 Summer
Conference Planning Committee:
LaNell Kellum, Chairman, Mississippi Community College Board
Shawn Mackey, Mississippi Community College Board
Special Thanks to the Facilities Committee
Ed Roberson, Mississippi Community College Board
David Campbell, Hinds Community College
Casandra Ware, Mississippi Community College Board
Kelly Trahan, Hinds Community College
Jackie Martin, Copiah Lincoln Community College
Scott Cooper, Hinds Community College
Amanda Walton, East Central Community College
Joyce Jenkins, Hinds Community College
Cindy Johnson, East Mississippi Community College
Napoleon Jones, East Mississippi Community College
Special Thanks to the Rankin Chamber
David Campbell, Hinds Community College
of Commerce for their support of the conference.
Joyce Jenkins, Hinds Community College
Rankin Chamber of Commerce
Kelly Trahan, Hinds Community College
http://www.rankinchamber.com/home.aspx
Laura Bigbee, Holmes Community College
Mandy Arinder
Sherri Comfort, Holmes Community College
601.825.2268
Sherrie Cheek, Holmes Community College
[email protected]
Tony Tice, Itawamba Community College
Debbie Hinton, Jones County Junior College
Thank you to the Registration Committee:
Lucy Flowers, Jones County Junior College
Jackie Martin, Chairman Copiah Lincoln Community College
Nan Roberson, Meridian Community College
Casandra Ware, Mississippi Community College Board
Richie McAlister, Meridian Community College
Julie Jordan, Research and Curriculum Unit
Cheryl Bond, Mississippi Gulf Coast Community College
Lucy Flowers, Jones County Junior College
Dean Belton, Mississippi Gulf Coast Community College
Patsy Gardner, Northwest Mississippi Community College
John Shows, Mississippi Gulf Coast Community College
Christi Gregory, Mississippi Delta Community College
Very Special Thank You to the 2011
Patsy Gardner, Northwest Mississippi Community College
Summer Conference Program Planning Committee:
Rhonda Still, Northwest Mississippi Community College
Nan Robinson, Chairman, Meridian Community College
Gwen Smith, Pearl River Community College
Rhonda Still, Northwest Mississippi Community College
Aurelia Gayden, Southwest Mississippi Community College
Joyce Jenkins, Hinds Community College
Sherrie Comfort, Holmes Community College
Laura Bigbee, Holmes Community College
Cheryl Bond, Mississippi Gulf Coast Community College
SPONSORS
EXHIBITORS
PLATINUM SPONSOR
Arbonne International
Melanie Busby
713 E. Main Street
West Point, MS 39773
[email protected]
Phone: 662-275-3941
Ingalls Shipbuilding
Jim McIngvale
P.O. Box 149
Pascagoula, MS 3958
[email protected]
Phone: 228-935-0715
Mississippi Manufacturers Association
Jay C. Moon
P.O. Box 22607
Jackson, MS 39225-2607
[email protected]
Phone: 601-292-1113
FAX: 601-948-1475
GOLD SPONSORS
McGraw Hill Contemporary
Wendy Tyler
201 Sturbridge Drive
Lagrange, Georgia 30240
[email protected]
Phone: 706-333-5351
FAX: 706-884-384
SILVER SPONSORS
Eddie Hanebuth, Sales Manager, Technical Training Aids
252 Thomastown Lane, Suite F
Ridgeland, MS 39157
E-Mail: [email protected]
Phone: ( 601 )856-0006
Fax (601 )856-2576
Magee Enterprises, Inc.
105 Millcreek Corners
Brandon, Mississippi 39047
Contact: Mike Thomas
Email: [email protected]
Phone: 601-992-0741
Fax: 601-992-2162
Mississippi Construction Education Foundation
Mike Barkett, State Director
290 Commerce Park Drive Ste B
Ridgeland, Mississippi 39157
[email protected]
Phone: 601-941-9181
FAX: 601-605-2987
RARE Designs
Rodney Richardson
[email protected]
127 Buschman Street, Ste 10
Hattiesburg, MS 39401
Phone: 601-544-7273
SIVAD, Inc.
FAX: 601-584-9008
Chris Murphy
www.raredesign.com
5421 Superior Drive
SODEXO- A World Leader in Quality of
Baton Rouge, LA 70816
Daily Life Solutions:
[email protected]
Terry L. Woodard, District Manager
Phone: 601-613-0224
[email protected]
FAX: 225-291-1429
601-278-9422 - Office
601-898-2133 - Fax
www.SodexoUSA.com
Join the fight against hunger: www.helpstophunger.org
Our
doesn’t
just apply to ships.
At Ingalls Shipbuilding, we’re proud to support our local schools in helping every child reach
their fullest potential. To find out more visit huntingtoningalls.com/is today.