lowdown lowdown - Parts Unlimited

LOWDOWN
JULY 2015
S N O W M O B I L E
•
S T R E E T
•
O F F - R O A D
•
AT V
•
W AT E R C R A F T
1811-2798
1811-2808
LV ONE SLIP-ONS
• Oval-shaped muffler bodies with flat upper and lower zones
• Stainless steel mufflers are TIG-welded AISI 304 stainless steel
with a special sandblasted “titanium look” finishing treatment
1811-2826
• Tailpipe and fittings are TIG-welded AISI 304 stainless steel
• Muffler end cap is a high-performance Technopolymer design that
is lightweight with high resistance against mechanical and
thermal stress
• Carbon fiber muffler mount strap
• End cap supplied in versions for vertical terminal (engine side) or
horizontal terminal (under seat) assembly
• The geometrical development of the pipework and muffler is
specific for each engine model, aimed to enhance the torque and
maximum power, meeting the required parameters set by EU
standards
• R1200GS Adventure slip-on includes carbon fiber heat shield
FITS MODEL
TAILPIPE/MUFFLER/END CAP TYPE
PART #
SUG. RETAIL
Stainless/stainless/polymer
1811-2798
CBR500 13-15
Stainless/stainless/polymer
1811-2828
402.95
Integra 700 i.e. 12
Stainless/stainless/polymer
1811-2818
402.95
Stainless/stainless/polymer
1811-2826
402.95
Stainless/stainless/polymer
1811-2808
402.95
BMW
R1200GS Adventure 10-12 (can be used with side cases)
$
499.95
HONDA
KAWASAKI
ZX6R Ninja 13-15
TRIUMPH
Tiger 800/800 11-12
DISCLAIMER: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related part(s) that alter the performance of OEM emissionrelated devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information.
parts-unlimited.com
1810-2299
1810-2301
ALPHA SIGNATURE SERIES 3/4 EXHAUST SYSTEMS
FOR YAMAHA YZF R1/R-1M 15
• All-new muffler design from Yoshimura R&D
• 3/4 system; uses OEM headpipes
• Better use of internal volume to produce the famous deep, distinct
Yoshimura exhaust note
• The highest level of fit and finish due to improved
production tolerances
• Muffler features a large diameter carbon fiber end cap and
integrated, draw-formed slash-cut muffler outlet
• Iconic Tri-Oval muffler design heritage with a revised muffler shape
for improved ground clearance
• Muffler design is optimized for durability and ease of servicing
LINK PIPE/MUFFLER/END CAP TYPE
PART #
Stainless/stainless/carbon
1810-2299
SUG. RETAIL
Stainless/carbon/carbon
1810-2300
$
798.95
LINK PIPE/MUFFLER/END CAP TYPE
PART #
Titanium/carbon/carbon
1810-2301
SUG. RETAIL
$
1,398.95
898.95
DISCLAIMER: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related part(s) that alter the performance of OEM emissionrelated devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information.
TAIL KITS AND X-TAIL KITS
• Smooth out your tailpiece for a
great look
• Most kits include a black anodized
aluminum license/turn signal mount,
turn signals and an LED license light
2030-0894
2030-0891
2030-0897
2030-0896
• No cutting or drilling of
plastic required
NOTE: In turn signal column of chart,
black indicates housing color; clear
is lens color with amber bulbs.
X-TAIL KITS
• All-new design
• The same great style as our standard
kit, but without turn signals
• Aluminum license plate mount and
LED license plate light included
• For use on bikes with taillights with
integrated turn signals
X-TAIL KITS
TAIL KITS WITH TURN SIGNALS
FITS MODEL
TURN SIGNAL COLOR
TAIL KIT PART #
SUG. RETAIL
PART #
SUG. RETAIL
67.95
CB300F 15
2030-0898
2030-0893
99.95
CBR300R 14-15
2030-0897
120.95
Black/amber
2030-0892
67.95
CB650F 15
2030-0896
71.95
Black/amber
2030-0891
99.95
CBR650F 14-15
2030-0895
120.95
CB300F 15
Black/clear
2030-0894
CBR300R 14-15
Black/clear
CB650F 15
CBR650F 14-15
2
FITS MODEL
HONDA
HONDA
$
$
71.95
MATERIAL4X GLOVES
MULTICAM M-PACT® GLOVES
• Material4X offers superior abrasion
resistance and greater tear
resistance than standard
synthetic gloves
• Molded Thermal Plastic Rubber
(TPR) provides impact protection
to the fingers and knuckles
®
• Impact Guard™ integrated with
TPR knuckle and finger
protection for improved dexterity
• TPR (Thermal Plastic Rubber) on the
knuckles and fingers protects against
impact and abrasion injuries
• Form-fitting TrekDry® material helps
keep hands dry and comfortable
• A second layer of material in the
palms aids in durability with
PORON® XRD™ for impact absorption
• TPR hook-and-loop closure for a
secure fit to the wrist
• Form-fitting TrekDry® top material
helps keep hands dry and comfortable
• Armortex® material on the index and thumb provides durable
gripping power
• Rubberized grip material on the thumb and
index finger provides durable gripping power
• XRD® palm madding for impact and
vibration absorption
• TPR hook-and-loop closure for a
secure fit to the wrist
SUG. RETAIL
$
• Machine washable
39.95
SUG. RETAIL
$
• Machine washable
34.95
SIZE
PART #
SIZE
PART #
SIZE
PART #
SIZE
PART #
8 (S)
3350-0194
11 (XL)
3350-0197
8 (S)
3350-0209
11 (XL)
3350-0212
9 (M)
3350-0195
12 (2X)
3350-0198
9 (M)
3350-0210
12 (2X)
3350-0213
10 (L)
3350-0196
10 (L)
3350-0211
ORHD GLOVES
• 13-gauge knitted shell
delivers CE Level 5
cut resistance
HI-VIZ ORANGE
SAFETY FASTFIT
• Thermal Plastic Rubber
(TPR) knuckle and metacarpal
impact protection
EASY-ON/EASY-OFF CUFF
• High-visibility outer shell with
ANSI-107 compliant reflective
and fluorescent materials to
make you more conspicuous
in hazardous working
environments
• TPR impact-resistant finger
guards and pinch-point
fingertip protection
• Textured nitrile-coated palm
and fingers improve grip in
slick conditions
• High-visibility, moisture wicking
TrekDry® material wraps the top of
your hand, and 3M® reflective ink provides luminance
• 3mm internal palm padding absorbs shock and vibration
• Synthetic leather safeguards your palm for improved wear when
handling tools, and the elastic cuff offers a
SUG. RETAIL
secure, second-skin fit with
$
16.95
easy on/off flexibility
SIZE
PART #
SIZE
• Durable Armortex® reinforces the area between your thumb and
index finger
• Extended cuff with TPR hook-and-loop closure
• Machine washable
SUG. RETAIL
$
30.95
PART #
SIZE
PART #
SIZE
PART #
3350-0204
11 (XL)
3350-0207
12 (2X)
3350-0208
8 (S)
3350-0199
11 (XL)
3350-0202
8 (S)
9 (M)
3350-0200
12 (2X)
3350-0203
9 (M)
3350-0205
10 (L)
3350-0201
10 (L)
3350-0206
3920-0389
3920-0390
BAR-HARNESS
• A hassle-free way to secure motorcycles;
virtually eliminates the possibility of damage
to bodywork
• Simple, quick and very easy to use; mounts on the
grips and keeps tie-downs away from the body
• Nylon webbing has tensile strength of over 5,500 lb.
• Best solution when using tie-downs on sport bikes
• Can be used on wide variety of
motorcycles; fits bars up to 34" wide
SUG. RETAIL
$
29.95
COLOR
PART #
Red
3920-0389
Blue
3920-0390
3
VOLOLIGHTS ADJUSTABLE MOUNTING BRACKET
• Bracket facilitates fitment of Vololights away from fender eliminator
kits, taillight obstacles, etc.
• Slotted holes allow 0.25" - 0.75" of movement up or down
• Made from 1 ⁄8" powder-coated steel; weighs 3.7 oz
• Made in the U.S.A.
PART #
SUG. RETAIL
2030-0890
DECELERATION
INDICATION SYSTEMS
$
18.95
• Encourage increased following distances
and reduce the risk of rear end collisions
• Detect and indicate all methods of deceleration, whether engine
braking, downshifting or using brake levers
• Two different flash patterns alert drivers to normal deceleration and
emergency braking
• Three sensitivity settings (Sport, Touring and Default) allow user to
adjust for motorcycle type and riding style
• Provide an earlier deceleration indication to reduce risk of rear
end collisions
• Available in carbon fiber, but carbon fiber wrap does not contain
actual carbon fiber
• Easy installation with only 9-16V and no crimping required
SUG. RETAIL
2030-0889
FOR INDIAN
CHIEF/CHIEFTAIN
14-15
• Water resistant and
traps large
dirt particles
• Universal fit; designed to work with most 4" x 7" license
plate frames
PART #
PRE-FILTER
$
129.95
PART #
SUG. RETAIL
1011-3491
$
24.95
1014-0219
AIR CLEANER KIT
AND COVERS
FOR INDIAN CHIEF
CLASSIC, CHIEF
VINTAGE AND
CHIEFTAIN
MODELS 14-15
• Engineered to
boost performance
1010-1612
• High-flow air filter provides twice the
surface area of the stock filter for up to
37% more airflow and a five
horsepower gain
• Design maintains leg clearance
• Billet aluminum construction with a
high-quality, washable and re-usable
cotton gauze air filter element
• Covers are made from billet aluminum and
show-chrome plated
1014-0220
• Air cleaner covers sold separately; must order an air
cleaner kit and cover for a complete assembly
• Made in the U.S.A.
NOTE: Not legal for sale or use on CA pollutioncontrolled vehicles.
4
DESCRIPTION
PART #
Air cleaner kit
1010-1612
S&S® Nostalgic Script aircleaner cover
1014-0219
129.95
S&S logo air cleaner cover
1014-0220
129.95
®
SUG. RETAIL
$
299.95
HIGH-FLOW AIR FILTER
ATV AIR FILTERS
FOR HONDA CRF250L 14-15
1011-3501
• Unsurpassed in airflow, dirt stopping and overall performance
1011-3503
• Two-stage air filters come apart for maximum airflow and ultimate cleaning
• Designed to increase
horsepower and torque
• Most filters feature the Ultra Seal grease groove on the sealing surface
• Pleated design provides
increased airflow and high filtration
• Each fits in stock air box exactly like OEM filter
• Original K&N High-Flow Technology
• Clean easily with grease-cutting dishwashing detergent; just clean,
oil and reuse indefinitely
• Application-specific sealing bead ensures an
airtight fit
• Made in the U.S.A.
• Epoxy-coated aluminum backfire screen protects
filter element
FITS MODEL
SUG.
RETAIL
PART #
ARCTIC CAT
Wildcat 700 14-15
1011-3500
• Made in the U.S.A. for over 45 years
Wildcat 1000 14-15
PART #
SUG. RETAIL
1011-3499
$
73.95
PART #
SUG.
RETAIL
54.95
RZR 60 15
1011-3502
1011-3501
54.95
RZR 900/RZR 4 900 15
1011-3502
54.95
1011-3502
54.95
1011-3503
49.95
$
POLARIS
RZR 50 15
FITS MODEL
POLARIS (CONT)
• Cleans up easily with K&N filter cleaners
$
54.95
YAMAHA
Viking 700 14-15
0705-0156
FUEL VALVE KITS
• Direct OE replacement fuel valve
• Rubber fuel-resistant gaskets
• Direct OE replacement formed fuel line
• Include OE-style fuel line clamps
• Fuel lines meet C.A.R.B. and EPA fuel line
permeation standards for ATVs/UTVs
• Sold each
FITS MODEL
1011-3502
PART #
SUG.
RETAIL
HONDA
FITS MODEL
PART #
SUG.
RETAIL
KAWASAKI
ATC250ES 85-87
0705-0151
ATC250SX 85-87
FITS MODEL
PART #
SUG.
RETAIL
YAMAHA (CONT)
54.95
KLF220 Bayou 88-02
0705-0167
59.95
YFB250 Timberwolf 92-94
0705-0198
0705-0151
54.95
KLF300 Bayou 2x4 88-02
0705-0168
69.95
YFB250 Timberwolf 95-00
0705-0199
TRX250 97-01
0705-0154
69.95
34.95
KLF300 Bayou 4x4 89-02
0705-0169
79.95
YFM250 Bear Tracker 99-04
0705-0187
TRX250EX 01-05
0705-0155
29.95
69.95
KLF400 Bayou 4x4 93-99
0705-0169
79.95
YFM250 Big Bear 2x4 07-09
0705-0188
TRX250EX 06-07
29.95
0705-0156
69.95
SUZUKI
YFM250 Bruin 05-06
0705-0188
TRX250EX 08
29.95
0705-0157
69.95
LT80 87-88
0705-0178
89.95
YFM350 Big Bear 87-99
0705-0191
34.95
39.95
$
$
$
34.95
TRX250TE/TM Recon 02-04
0705-0154
69.95
LT-F250 02-06
0705-0171
89.95
YFM350 Bruin 04-06
0705-0192
TRX250TE/TM Recon 05-07
0705-0159
69.95
LT-A400 Eiger 02
0705-0175
99.95
YFM350 Grizzly 07
0705-0192
39.95
TRX250TE/TM Recon 08-14
0705-0158
69.95
LT-A400 Eiger 03
0705-0170
89.95
YFM350 Grizzly 08-14
0705-0182
49.95
TRX250X 09-14
0705-0157
69.95
LT-F400 Eiger 03
0705-0170
89.95
YFM350 Raptor 04-07
0705-0196
39.95
TRX300 93-00
0705-0151
54.95
LT-Z400 03-05
0705-0173
89.95
YFM350 Raptor 08-13
0705-0197
39.95
TRX300FW 93-00
0705-0151
54.95
LT-4WWD Quadrunner 95-98
0705-0174
89.95
YFM350 Warrior 87-04
0705-0180
39.95
TRX350FE/FM/TE/TM 00-03
0705-0160
69.95
LT-A500 Vinson 03-05
0705-0176
89.95
YFM350 Wolverine 95-05
0705-0180
39.95
TRX350TE/TM/TE/TM 00-03
0705-0160
69.95
LT-F500 Quadrunner 98-02
0705-0177
99.95
YFZ350 Banshee 88-06
0705-0179
34.95
TRX350FE/FM/TE/TM 04-05
0705-0161
69.95
LT-F500 Vinson 03-05
0705-0172
89.95
YFM400 Big Bear 00-07
0705-0189
29.95
TRX350TE/TM/TE/TM 04-05
0705-0161
69.95
YAMAHA
0705-0190
34.95
TRX350FE/FM/TE/TM 06
0705-0162
69.95
YFM50 Raptor 04-07
0705-0186
29.95
YFM400 Big Bear 4x4
IRS 08-12
TRX350TE/TM/TE/TM 06
0705-0162
69.95
YFM80 Badger 85-01
0705-0186
29.95
YFM400 Grizzly 07
0705-0194
39.95
YFM400 Grizzly 08
0705-0183
49.95
YFM400 Kodiak 93-99
0705-0191
34.95
YFM400 Kodiak 00-02
0705-0195
39.95
YFM400 Kodiak 03-06
0705-0194
39.95
YFM450 Grizzly 07-14
0705-0183
49.95
YFM450 Kodiak 03-06
0705-0194
39.95
YFM660 Grizzly 02-08
0705-0184
49.95
YFM660 Raptor 01-05
0705-0185
34.95
TRX400FA/FGA 04-06
0705-0163
69.95
YFM80 Grizzly 05-07
0705-0186
29.95
TRX400FA/FGA 07
0705-0164
69.95
YFM80 Raptor 02-07
0705-0186
29.95
TRX400FW 95-03
0705-0152
79.95
YFM100 Champ 89-91
0705-0186
29.95
TRX450ES 98-01
0705-0152
79.95
YFM125 Grizzly 04-07
0705-0181
29.95
TRX450FE/FM 02-04
0705-0152
79.95
YFM125 Grizzly 08-13
0705-0193
29.95
TRX450ER/R 06-07
0705-0165
59.95
YFA 1 Breeze 98-04
0705-0181
29.95
TRX450R 04-05
0705-0166
59.95
YFM200 Moto 4 85-89
0705-0180
39.95
TRX450S 98-01
0705-0152
79.95
YFS200 Blaster 88-04
0705-0181
29.95
TRX650FA 03-05
0705-0153
79.95
YTM225 83-86
0705-0180
39.95
DISCLAIMER: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related part(s) that alter the performance of OEM emissionrelated devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information.
5
OPTIMATE SOLAR
• A smarter solar solution with a
panel with separate smart
pulse charger
OPTIMATE
12V TO 12V
2A DC TO DC
• OptiMate Solar does
it differently, the 6W solar
panel where the sun is and
the charger where the battery is,
so that you have immediate
information on battery
condition at hand right
where it matters most
• Charge and maintain your battery
without AC power
• 14' of cable separates the charger from the panel, with SAE to SAE
interconnection providing the option of extending further
• 6W hi-efficiency solar panel with 12V controller
• Controllers with included
DC power supply for
nighttime charging;
sold separately
PART #
SUG. RETAIL
3807-0340
$
3807-0318
3807-0317
99.95
• First in the range to be powered from a DC
source or another 12V battery, to remotely save,
recharge and maintain your stored vehicle’s 12V
lead-acid battery
• Great option for emergency vehicle-to-vehicle charging
• Extended maintenance guaranteed
by the high-efficiency electronics
and processor control
PART #
• Built-in protection prevents deep
3807-0339
discharge of the source battery
3807-0319
SUG. RETAIL
$
3807-0320
89.95
3807-0321
3807-0328
3807-0327
3807-0326
3807-0322
3807-0323
3807-0324
3807-0325
3807-0335
3807-0332
3807-0329
3807-0330
3807-0334
3807-0331
CHARGER ACCESSORIES
3807-0333
• SAE eyelet connectors now available individually
or in 20- and 100-piece bulk packs
• For all TecMate chargers except the old-style
Optimate Pro 4-S
DESCRIPTION
3807-0336
PART #
SUG.
RETAIL
SAE (BLACK PLUG) CHARGER ACCESSORIES
3807-0337
3807-0338
DESCRIPTION
3807-0341
PART #
SUG.
RETAIL
SAE (BLACK PLUG) CHARGER ACCESSORIES (CONT)
12V Battery lead w/ integrated battery status
3807-0317
24.95
Y-splitter two DC 2.5mm sockets to SAE connector
3807-0329
12V Battery status monitor w/ opposite SAE connector
3807-0318
22.95
3807-0319
24.95
3807-0330
25.95
Lithium battery tester
Y-splitter Bike 90° plug in to dual cigarette lighter
socket adapters, 18" L
2100mA weatherproof USB charger w/ DC 2.5mm plug
3807-0320
33.95
DC 2.5mm to Bike 90° plug adapter for heated
apparel, 24" L
3807-0331
17.95
2100mA weatherproof USB charger w/ 90° low profile
Bike (DIN) plug
3807-0321
44.95
Y-splitter DC 2.5mm plug to dual DC 2.5mm sockets
3807-0332
11.95
USB Y-splitter w/ weatherproof connection system
3807-0322
9.95
3-Piece adapter kit w/ SAE plug to DC 2.5mm socket
3807-0333
17.95
12V Bike to DIN plug w/ SAE connector, 12" L
3807-0323
12.95
Plug, Auto
3807-0334
7.95
Battery clips, fused
3807-0335
9.95
$
Weatherproof SAE socket, front panel mount
3807-0324
16.95
Weatherproof battery lead for heated apparel
w/ 2.5mm plug
3807-0325
9.95
Y-splitter two cigarette lighter sockets to SAE
3807-0326
11.95
10 amp, waterproof charge cable extender, 15 ft.
3807-0336
14.95
5 amp, waterproof charge cable extender, 40"
3807-0337
8.95
12.95
Adapter, OBDII to SAE
3807-0338
17.95
SAE to USB cord (charger will turn off if battery is
lower than 12.4V, preventing accidental
battery discharge)
3807-0341
33.95
SAE to Bike 90° adapter, 20" L w/ low profile
DIN connector
3807-0327
19.95
Tank bag/hard case power entry w/ DC 2.5mm plug to
SAE adapter
3807-0328
19.95
6
$
2001-1092
2001-1091
RF3 3" LED CUBE LIGHTS
• A compact lighting option with low power consumption
and durability
2001-1090
• Unique Reflector Facing Technology allows for better beam control
and output than conventional LED lamps
• Feature two 8W LEDs that produce a white beam color at 6000K
temperature
• Kit available in driving light or flood light
• SAE/ECE compliant
$
• Each kit includes two lights, pre-assembled
wiring harness and installation instructions
SUG. RETAIL
349.95
2001-1089
LP270 2.75" LED LIGHT KITS
• Halogen lamp performance with low power consumption, durability
and compact size of an LED lamp
• Unique Reflector Facing Technology allows for better beam control
and output than conventional LED lamps
• Feature two LEDs that produce a white beam color at
6000K temperature
DESCRIPTION
PART #
DESCRIPTION
PART #
• Kit available in driving light or fog light
Driving light kit
2001-1092
Flood light kit
2001-1091
• SAE/ECE compliant
$
• Each kit includes two lamps, wiring harness,
relay and switch
PERFORMANCE LED FOG BULB
• H8/H11 bulb provides a premium look and more
performance compared to stock halogen bulb
• Designed with a sharp cut to minimize glare
and direct light output toward the road
DESCRIPTION
LEDS
TOTAL POWER DRAW
PART #
Driving light kit
Two 10W LEDs
8.5W
2001-1090
Fog light kit
Two 3W LEDs
7.5W
2001-1089
• Installs directly in place of stock bulbs with
no rewiring, splicing or soldering
LED WEDGE BULB
• Requires up to 75% less energy than OEM bulbs
• 168 (T10) wedge bulb with high diffusion
optical lens
• Features dual-alloy aluminum and copper
construction and an electronic fan to keep circuit
board cool and maximize life
• 2400 lumens with a 10-16V
operating range and
PART #
6000K color temperature
2060-0502
• Sold in pairs
SUG. RETAIL
349.95
• Low power draw of only 1 watt
SUG. RETAIL
$
299.95
• Features 30 lumen output for greater illumination
and 6000K white color temperature to
replicate daylight
PART #
• Polarity free: + 2060-0503
• Sold in pairs
SUG. RETAIL
$
29.95
2001-1099
2001-1093
2001-1096
UTV BAR LIGHT MOUNTING KITS
2001-1101
• Made from CNC-machined aluminum and black
anodized for durability
DESCRIPTION PART #
• Fit most Arctic Cat
Wildcat, Kawasaki Teryx,
PLATFORM
Polaris RZR and
For 1.5" bar
2001-1093
Yamaha Rhino
SUG.
RETAIL
$
69.95
LIGHTING LOWER FORK MOUNT KITS
• Allow for simple and easy
installation of lighting on
lower front fork bolt
DESCRIPTION
M5 bolt kit
2001-1099
M6 bolt kit
2001-1100
PART #
SUG.
RETAIL
FOR LP270 LIGHTS
For 1.75" bar
2001-1094
69.95
For 2" bar
2001-1095
69.95
• Available with M5 or M6
bolts for LP270, LP530 or
RF3 lights
For 1.5" bar
2001-1096
79.95
FOR LP530 AND RF3 LIGHTS
• Install easily
For 1.75" bar
2001-1097
79.95
• Mount kits for LP530 or RF3
lights include L bracket
M5 bolt kit
2001-1101
59.95
• Hardware included
For 2" bar
2001-1098
79.95
• Each kit includes bolts,
Loctite and spacers
M6 bolt kit
2001-1102
59.95
• Available in Platform and
Pillar styles for 1.5", 1.75"
and 2" diameter bars
• Each kit includes two
mounting brackets
PILLAR
$
19.95
19.95
7
SCORPION BILLET CLUTCHES
• Feature a 100% or more increase in
clutch surface area (compared to stock)
and include a CNC-machined billet
aluminum pressure plate, friction
plates, steel plates, a steel inner hub
and additional sets of coil springs to
allow for clutch tuning
1130-0229
• Can also be run wet or dry in an open or
enclosed primary
• Made in the U.S.A.
FITS MODEL
$
SUG. RETAIL
549.95
PART #
VICTORY
All models 08-10
1130-0229
All models 11-15
1130-0230
1131-2999
CLUTCH
PLATE KIT
• Carbon fiber
• Includes ten frictions,
nine steels and one
SUG. RETAIL
$
damper spring
207.95
FITS MODEL
PART #
VICTORY
Boardwalk 14-15
1131-3026
CA Kingpin 06
1131-3026
Cross Country/Cross Roads (w/ cruise
control) 10-12
1131-3026
Cross Country/Touring (w/ cruise control)
10-15
1131-3026
Cross Roads 11
1131-3026
COMPLETE KEVLAR® CLUTCH KIT
CARBON FIBER CLUTCH KIT
• Includes five Kevlar friction plates, four
tempered steel plates and six
heavy-duty springs
• Carbon fiber
®
FITS MODEL
KIT PART #
SPRINGS PART #
1131-2999
1131-3000
HONDA
GROM 125 14
Cross Roads (w/o cruise control) 10-14
1131-3026
PART #
Cross Roads (w/ cruise control) 10-15
1131-3026
1131-2999
Hammer 05-15
1131-3026
1131-3000
SUG. RETAIL
$
186.95
114.95
DIAPHRAGM CLUTCH SPRING
FOR KTM 450 SX-F/XCF/XC- W/EXC 12-15 AND
500 EXC/XC-W 12-15
FOR VICTORY MODELS 01-15 (ALL)
• Heavy-duty spring
• Includes billet aluminum
pressure plate and heavy-duty spring
• 20% stiffer
than stock
• Direct bolt-on replacement for
stock pressure plate and spring
parts-unlimited.com
1131-3025
22.95
HEAVY DUTY SPRING
AND BILLET
PRESSURE PLATE
• Ideal for high performance/heavy
load applications requiring
increased spring pressure
• Includes seven frictions, six
steels and a set of five
heavy-duty springs
PART #
SUG. RETAIL
$
FOR INDIAN CHIEF/
CHIEFTAIN 14-15
PART #
1131-3024
SUG. RETAIL
$
124.95
PART #
1131-3027
JULY 2015 • 9901-1685
SUG. RETAIL
$
29.95