contime - Nutronics India
Transcription
contime - Nutronics India
PRESET COUNTER PROGRAMMABLE COUNTER PRESET COUNTER PRESET COUNTER RELAY RESET RELAY RELAY RESET RESET AL MODE PC -4S PMC - 3020 PC -3 PC -2 PMC-3043 PV SV RATE CAL RL1 RL2 ERR. HOLD RL1 PRESET COUNTER RL2 CAL RL2 AT RL1 RATE UP UP DOWN DOWN UP MODE MODE PMC - 3021 DOWN MODE FLAG FLAG PMC - 3041 NUTRONIC S RELAY RESET PC -4 PRESET COUNTER PRESET COUNTER RELAY RELAY RESET RESET Rl1 PC -2S SV PV Rl2 PC -3S CONTIME 14 15 13 CT - 3010 DIGITAL COUNTER PROCESS CONTROLLER ADD PV RESET TOT. CAL INT AT ERR PROG. HEAT COOL RAMP SOAK OVER HOLD PC - 3050 SC -406 UP DOWN MODE FLAG PPC- 3077 PROFILE CONTROLLER HUM RATE EVENT COUNTER EVENT COUNTER TOTAL VIEW COUNT MANUAL AUTO PRINT HOLD START DE-HUM HEAT COOL ALARM ST.BY HOLD PROG. ALM ACK STOP MODEL - LPC- 3099 UP DOWN MODE SC - 406 DEC - 10 NI - 3070 O NI - 3070 O C SET C SET 16 17 13 DIGITAL TIMERS PRESET TIMER PRESET TIMER RATE CAL RL1 RL2 ERR. HOLD RELAY MAINS RELAY MAINS 2 7 UP DOWN MODE FLAG DT -2 PMT - 3042 DT - 3 T I M E T O TA L I S E R PMT-3043 TIME TOTALISER PV PROGRAMMABLE TIMER SV CAL RL2 MAINS RESET AT RL1 UP DOWN MODE FLAG AL UP MODE PMT - 3070 DOWN TT - 3060 NUTRONIC S PMT - 3043 FUZZY CONTROLLER ON TIME = 999.0 Sec OFF TIME = 999.9 Sec UP DOWN MODE FLAG LTC - 009 P R E S E T T I ME R P R E S E T T I ME R P R E S E T T I ME R P R ETEMP S E.TCONTROLLER TIMER PROG. RELAY MAINS RELAY MAINS MAINS RELAY 2 7 HOLD RELAY MAINS 7 DTS-3 DTS-2 0 7 CT - 3000 0 DTS-4 PMTC-3040 - 30-40 PMTC CT 2 18 19 MODE TT - 3060 DIGITAL HOUR METER PROCESS MONITOR CYCLIC TIMER MAINS RESET RATE CAL RL1 RL2 ERR. HOLD RELAY CT-01 UP DOWN MODE FLAG PM - 3040 DH - 410 WT - 01 BT - 100U WATER LEVEL CONTROLLER MAINS RELAY WL - 01 WT - 30 20 21 PROG. TEMP. CONTROLLER UP DOWN MODE RL2 ERR. RL1 HOLD CAL AT FLAG PMTC-3040 LC - 3040 LOAD MONITOR KN. MAINS OFF MAX.CAP OVER LOAD HOLD ON RESET MEMORY PEAK/ HOLD TARE NI - 2070 Platform type Load Cell are high performance, low cost, low profile off-centre single point load cells with very good sensitivity, repeatability and accuracy. These load cells have been specially designed considering the Bench Scales and Platform sized of up to 600mmX600mm. It is designed for eccentric load and gives the same output when the load are put in the center or at the corner. Corner adjustment is also very easy in this design. These Load cells are protected with high grade silicon compound for IP66 grade protection so that the load cells give predictable performance in both, dry or humid environments. FEATURES *High Strength International Grade Aluminum construction / Special grade electro-less nickel plated tool steel construction * Economically priced, Low cost * Low profile and convenient to use * High Accuracy 0.03% * OUTPUT 2mV / V. * Wide capacity range 100Kg to 300Kg * Environmentally protected to protection class IP65 * Support pan size up to 500mmX500mm / 600mmX600mm * Easy corner adjustment for accurate corner loading APPLICATION Bench Scale, Platform Scale, Conveyor Scale, Personal Weighing Scale, Bag Weighing Scale, Hopper Scale etc. 22 23 S-Type Load Cell Features are of high performance & low cost. S-type load cells are of very good sensitivity, repeatability and accuracy. They have been specially designed considering the hanging type weighing applications which include Tank Weighing, Hopper Weighing etc. And are also very widely used for the conversion of the existing Mechanical Platform Scales and Weigh-bridges to Electronic. These load cells work equally well while being used in Tension or Compression. These load cells are protected with high grade silicon compound for IP66 grade protection so that the Load cells give predictable performance in both, dry or humid environments. HUMIDITY CUM TEMPERATURE CONTROLLER HUMIDITY CUM TEMPERATURE INDICATOR C COOL FEATURES * Special grade electro-less nickel plated tool steel construction * Economically priced, Low cost * High Accuracy 0.03% * OUTPUT 2mV / V. * Wide capacity range 100Kg to 300Kg * Environmentally protected to protection class IP65 * Same load cell can be used in Tension or Compression COARSE FINE SET HUM SET COARSE %RH C %RH DE-HUM HEAT FINE DTH - 401 DTH - 301 APPLICATION Very suitable for use in most types of hanging weighing application including Tank Weighing, Hopper Weighing etc. Also widely used for conversion of existing Mechanical Platform Scales and Weigh-bridges to Electronic. Can be used in industrial test equipment, like Load- Testers, Spring- Testers, Tensile-Testers etc. PROG. TEMP. CONTROLLER CUM HUMIDITY CONTROLLER C %RH AT C RL 1 UP DOWN HUM %RH DE-HUM RL 2 UP MODE DOWN MODE PTH -302 HUMIDITY CONTROLLER %RH %RH HUMIDITY SENSOR HUM DE-HUM HUM %RH DE-HUM RATED VOLTAGE DC 5.0V CURRENT CONSUMPTION 3.0mA OPERATING TEMPERATURE RANGE 0~60 C OPERATING HUMIDITY RANGE 30-90%RH STORABLE TEMPERATURE -30 C ~ 85 C STORABLE HUMIDITY RANGE Within 95% ACCURACY + 5% RH (at 25 C , 60%RH 24 FINE COARSE SET UP DOWN MODE FLAG DHC -401 PHC - 3080 25