The Anchor Center - categories On The Hillman Group

Transcription

Innovative
Merchandising
The Complete Source
For All Your
Anchoring Needs!
Complete Anchor Source
Hillman offers the largest selection of hollow
and solid wall anchors available from a single
source in the hardware and lumber trade.
We offer our customers the range of products
necessary to handle the needs of the novice
to the serious contractor.
Walldog™
Tapper+®
Power-Stud+SD1™
Wedge-Bolt+®
High Quality, Building Code
Approved Anchors
•High Impact Header Signs
•Color-Coded Packaging
• "Anchor Guide" Pamphlet
• Information Point Display
Your key to Driving Anchor Sales!
Hillman distributes Powers® Professional
Anchors exclusively to the retail market.
Powers has provided innovative anchoring
solutions for more than
75 years and is the leading
anchor supplier to the
professional market. Powers takes pride in
manufacturing building code approved anchors
that exceed industry codes.
Code Approvals/ Listings
• InternationalCodeCouncil
• CityofLosAngeles
• Miami-DadeCounty,FL
• FactoryMutual
• UnderwritersLaboratory
Easy 1-2-3
How To Shop System
Product Index
Page
HOLLOW WALL ANCHORS
WalldogTM — Pan Head Phillips
WalldogTM — Oval Head Phillips
Blue Conical Plastic Anchor
Ribbed Plastic Anchor
Wallboard Anchor
Zip-All® Anchor
Wallhook
Hollow Wall Anchor
Drive Wall Anchor
Pop-ToggleTM
Zip-Toggle®
Strap-ToggleTM
Toggle Bolt
Toggle Wing
9
9
10
10
10
11
11
11
12
12
13
13
13
14
14
15
15-16
16
17
17
17-18
18
19
19-20
20
21
21
22
22
22
23
23
24
24
25
26
TECHNICAL INFORMATION
This catalog provides helpful installation and maximum allowable
load information. For complete load capacity and installation details
please call Hillman Customer Service at 1-800-800-4900 or visit
www.powers.com
MAXIMUM ALLOWABLE LOAD
The Maximum Allowable Load is calculated based on applying
a safety factor to the average ultimate shear and tension loads
obtained from laboratory testing. The Maximum Allowable Load can
be found on most Hillman Anchor packages to assist in locating the
proper anchor for your project.
•
Maximum Allowable Load for drywall (1/2”) and plaster is based
on 2:1 safety factor using an average of ultimate tension and
shear loads.
•
Maximum Allowable Load for concrete (4,000 PSI), block (C-90)
and brick is based on 4:1 safety factor using an average of
ultimate tension and shear loads.
The Maximum Allowable Load is a guide only and cannot
be guaranteed. Pound ratings are based on the anchor only.
Effectiveness can be diminished based on the material and
conditions of the base material.
BASE MATERIALS
The icons shown below represent the various base materials that
anchors are used in. Throughout this catalog you will see a mix of
these icons shown by each anchor type. These icons reflect the
different types of base materials that can be used with each anchor.
Drywall
Plaster
PRODUCT INDEX
SOLID WALL ANCHORS
Nylon Anchor
Hammer Drive Anchor
Drive® Anchor
Spike® Anchor — Steel/Zinc
Spike® Anchor — Black Perma-seal
Spike® Anchor — 316 Stainless Steel
Masonry Drive Pins
Lead Wood Screw Anchor
Machine Bolt Anchors
Wallplug
SharkieTM
T-Anchor
Lag Shield
Machine Screw Anchor
Drop-In Anchor
Tapper+® Drill Bits and Installation Tools
Tapper+® Concrete Screw Anchor — BLUE Perma-seal
Tapper+® Concrete Screw Anchor — WHITE Perma-seal
Tapper+® Concrete Screw Anchor — 410 Stainless Steel
Hurricane Tapper+® Concrete Screw Anchor —
Silver & White Perma-seal
Sleeve Anchor — Steel/Zinc
Sleeve Anchor — 304 Stainless Steel
Power-Bolt® Heavy Duty Sleeve Anchor
Power-Stud+® SD1 Anchor — Steel/Zinc
Power-Stud+® Wedge Anchor —
Mechanically Galvanized
Power-Stud® Wedge Anchor — 304 Stainless Steel
Wedge-Bolt®+ Anchor — Steel/Zinc
Wedge-Bolt®+ Anchor — Mechanically Galvanized
Wedge-Bolt® Anchor — 410 Stainless Steel
Wedge-Bit
Strike Anchor
Stud Bolt Anchor
Anchor Bolt — Plain Steel
Anchor Bolt — Hot Dipped Galvanized
Plastic ACQ Sleeve
Approvals and Listings
2
2
3
4
4
5
5
5
6
6
7
7
7-8
8
Tile
Concrete
Hollow Block
Brick
1
HOLLOW WALL ANCHORS
WalldogTM
Pan Head Phillips
Item #
DWO
• Nopredrillingindrywall
• Easilypenetrateswood&metalstuds
Size
Holds Up To (lbs.)**
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
4
4
4
4
10
10
10
10
008236780437
008236780444
008236780451
008236780468
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
50 lbs.
50 lbs.
50 lbs.
50 lbs.
175 lbs.
175 lbs.
175 lbs.
175 lbs.
75 lbs.
75 lbs.
75 lbs.
75 lbs.
95 lbs.
95 lbs.
95 lbs.
95 lbs.
20
20
20
20
10
10
10
10
008236780185
008236780192
008236780208
008236780215
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
50 lbs.
50 lbs.
50 lbs.
50 lbs.
175 lbs.
175 lbs.
175 lbs.
175 lbs.
75 lbs.
75 lbs.
75 lbs.
75 lbs.
95 lbs.
95 lbs.
95 lbs.
95 lbs.
75
75
75
75
3
3
3
3
008236780284
008236780307
008236780321
008236780345
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
50 lbs.
50 lbs.
50 lbs.
50 lbs.
175 lbs.
175 lbs.
175 lbs.
175 lbs.
75 lbs.
75 lbs.
75 lbs.
75 lbs.
95 lbs.
95 lbs.
95 lbs.
95 lbs.
52
3
008236802610
3/16"
1"
50 lbs.
175 lbs.
75 lbs.
95 lbs.
82
3
008236802726
3/16"
1"
50 lbs.
175 lbs.
75 lbs.
95 lbs.
82
3
008236802733
3/16"
1"
50 lbs.
175 lbs.
75 lbs.
95 lbs.
#2 Phillips Bit
Walldog Decorator
Contents per Pack: PHP Walldog
(20 pcs. each Chrome-White-Black-Brass), 3/16" Drill Bit,
#2 Phillips Bit
42072
Walldog Contractor
Contents per Pack: PHP & OHP Walldog
(20 pcs. each Chrome-White), 3/16" Drill Bit,
#2 Phillips Bit
42073
WalldogTM
Oval Head Phillips
• Nopredrillingindrywall
• Easilypenetrateswood&metalstuds
Item #
Fas-Pak
9520
9521
9522
9523
XL-Pak
42008
42009
42010
42011
DWO
HOLLOW WALL ANCHORS
Fas-Pak
9516
3/16 x 1-1/4" Brass Plated
9517
3/16 x 1-1/4" Chrome
9518
3/16 x 1-1/4" Black
9519
3/16 x 1-1/4" White
XL-Pak
42004
42005
3/16 x 1-1/4" Chrome
42006
3/16 x 1-1/4" Black
42007
3/16 x 1-1/4" White
XXL-Pak
385387
385388
3/16 x 1-1/4" Chrome
385389
3/16 x 1-1/4" Black
385390
3/16 x 1-1/4" White
Horizontal Kit
Walldog and Zip-Toggle® Combo
Contents per Pack: PHP Walldog
42071
(40pcs. Chrome), Zip-Toggle®(10pcs.), 3/16" Drill Bit,
Size
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
3/16 x 1-1/4"
3/16 x 1-1/4"
3/16 x 1-1/4"
3/16 x 1-1/4"
Brass Plated
Chrome
Black
White
4
4
4
4
10
10
10
10
008236780475
008236780482
008236780499
008236780505
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
50 lbs.
50 lbs.
50 lbs.
50 lbs.
175 lbs.
175 lbs.
175 lbs.
175 lbs.
75 lbs.
75 lbs.
75 lbs.
75 lbs.
95 lbs.
95 lbs.
95 lbs.
95 lbs.
3/16 x 1-1/4"
3/16 x 1-1/4"
3/16 x 1-1/4"
3/16 x 1-1/4"
Brass Plated
Chrome
Black
White
20
20
20
20
10
10
10
10
008236780222
008236780239
008236780246
008236780253
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
50 lbs.
50 lbs.
50 lbs.
50 lbs.
175 lbs.
175 lbs.
175 lbs.
175 lbs.
75 lbs.
75 lbs.
75 lbs.
75 lbs.
95 lbs.
95 lbs.
95 lbs.
95 lbs.
** The load values listed are the Maximum Allowable Load capacities for the specified materials. For ½" drywall the Maximum Allowable Load is based on a 2:1 safety factor using an average
of ultimate tension and shear loads. For concrete, block, and brick, the Maximum Allowable Load is based on a 4:1 safety factor using an average of ultimate tension and shear loads.
2
▲ = Discontinue when out
Item #
Fas-Pak
5033
5036
5039
5042
5043
370348
370350
370351
370353
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
6-8 x 3/4" Screws Not Included
10-12 x 1" Screws Not Included
14-16 x 1-3/8" Screws Not Included
Assortment Pack
16
14
10
5
10
10
10
10
008236032321
008236032338
008236032345
008236032352
3/16"
3/16"
1/4"
5/16"
3/4"
7/8"
1"
1-3/8"
5
5
10
10
30
50
50
50
-
Includes 2pcs. of each size, Screws Not Included
8
10
008236149623
-
-
-
-
6-8 x 3/4" with PHP SMS
10-12 x 1" with PHP SMS
14-16 x 1-3/8" with PHP SMS
10-12 x 1" with Brass Plated FHP SMS
10-12 x 1" with White FHP SMS
10-12 x 1" with Brown FHP SMS
10-12 x 1" with Black FHP SMS
6
6
4
2
4
4
4
4
10
10
10
10
10
10
10
10
008236149616
008236032420
008236032437
008236032444
008236427714
008236427738
008236427752
008236427776
3/16"
3/16"
1/4"
5/16"
1/4"
1/4"
1/4"
1/4"
3/4"
7/8"
1"
1-3/8"
1"
1"
1"
1"
5
5
10
10
10
10
10
10
30
50
50
50
50
50
50
50
-
-
10-12 x 1" with PHP SMS
14-16 x 1-3/8" with PHP SMS
80
50
25
25
75
50
25
20
5
5
5
5
5
5
5
5
008236047707
008236047714
008236047721
008236047738
008236047745
008236047752
008236047769
008236047776
3/16"
3/16"
1/4"
5/16"
3/16"
3/16"
1/4"
5/16"
3/4"
7/8"
1"
1-3/8"
3/4"
7/8"
1"
1-3/8"
5
5
10
10
5
5
10
10
30
50
50
50
30
50
50
50
-
-
100
100
100
50
-
008236107449
008236107456
008236107463
008236107470
3/16"
3/16"
1/4"
5/16"
3/4"
7/8"
1"
1-3/8"
5
5
10
10
30
50
50
50
-
-
1000
500
-
008236149715
008236149708
3/16"
1/4"
7/8"
1"
5
10
50
50
-
-
201
-
008236107487
3/16"
3/4"
5
30
-
-
201
-
008236107494
3/16"
7/8"
5
50
-
-
201
-
008236107500
1/4"
1"
10
50
-
-
101
-
008236107517
5/16"
1-3/8"
10
50
-
-
201
-
008236109337
3/16"
3/4"
5
30
-
-
201
-
008236109344
3/16"
7/8"
5
50
-
-
201
-
008236109351
1/4"
1"
10
50
-
-
201
-
008236109368
3/16"
3/4"
5
30
-
-
201
-
008236109375
3/16"
7/8"
5
50
-
-
201
-
008236109382
1/4"
1"
10
50
-
-
6-8 x 3/4" with Pan Head Slotted SMS
Contents per Pack: 6-8x3/4"(100pcs.), PHS
SMS(100pcs.), 3/16" Drill Bit
8-10 x 7/8" with Pan Head Slotted SMS
Contents per Pack: 8-10x7/8"(100pcs.), PHS
10-12 x 1" with Pan Head Slotted SMS
Contents per Pack: 10-12x1"(100pcs.), PHS
14-16 x 1-3/8" with Pan Head Slotted SMS
Contents per Pack: 14-16x1-3/8"(50pcs.), PHS
6-8 x 3/4" with Pan Head Phillips SMS
373500
Contents per Pack: 6-8x3/4"(100pcs.), PHP
373503
Contents per Pack: 8-10x7/8"(100pcs.), PHP
373506
Contents per Pack: 10-12x1"(100pcs.), PHP
373509
373512
373515
Pieces
per
Pak
Size
8-10 x 7/8" with Pan Head Phillips SMS
10-12 x 1" with Pan Head Phillips SMS
6-8 x 3/4" with Hex Washer Slotted SMS
Contents per Pack: 6-8x3/4"(100pcs.), HWH
8-10 x 7/8" with Hex Washer Slotted SMS
Contents per Pack: 8-10x7/8"(100pcs.), HWH
10-12 x 1" with Hex Washer Slotted SMS
Contents per Pack: 10-12x1"(100pcs.), HWH
Brick
-
HOLLOW WALL ANCHORS
5061
5063
5066
5069
5067
5068
5070
5071
XL-Pak
41390
41392
41394
41396
41400
41402
41404
41406
C-Pak
370336
370337
370342
370345
M-Pak
370334
370335
Kit
DWO
Blue Conical Plastic Anchor
3
Item #
DWO
Ribbed Plastic Anchor
Fas-Pak
5107
5108
5109
XL-Pak
41820
41821
41822
C-Pak
370326
370329
370332
Kit
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
4-6-8 x 7/8" with PHP SMS
8-10-12 x 1-1/4" with PHP SMS
12-14-16 x 1-1/2" with PHP SMS
6
6
4
6
6
6
008236427790
008236427820
008236427868
3/16"
1/4"
5/16"
7/8"
1-1/4"
1-1/2"
10
15
10
30
50
50
-
-
8-10-12 x 1-1/4" with PHP SMS
12-14-16 x 1-1/2" with PHP SMS
75
25
20
5
5
5
8236516395
008236516418
008236516432
3/16"
1/4"
5/16"
7/8"
1-1/4"
1-1/2"
10
15
10
30
50
50
-
-
4-6-8 x 7/8" Screws Not Included
8-10-12 x 1-1/4" Screws Not Included
12-14-16 x 1-1/2" Screws Not Included
100
100
50
-
008236107418
008236107425
008236107432
3/16"
1/4"
5/16"
7/8"
1-1/4"
1-1/2"
10
15
10
30
50
50
-
-
101
-
008236405309
3/16"
7/8"
10
30
-
-
101
-
008236405675
1/4"
1-1/4"
15
50
-
-
101
-
008236405316
5/16"
1-1/2"
10
50
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Screw Size
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Zinc #8 with PHP SMS
Nylon #8 with PHP SMS
Nylon #8 with Brass Plated FHP SMS
Nylon #8 with White FHP SMS
Nylon #8 with Brown FHP SMS
Nylon #8 with Black FHP SMS
2
2
4
2
2
2
2
6
6
6
6
6
6
6
008236149630
008236428988
008236429008
008236433159
008236429022
008236429046
008236429060
None
None
None
None
None
None
None
8
8
6
8
8
8
8
50
50
30
50
50
50
50
-
-
-
Nylon #8 with Brass Plated FHP SMS
Nylon #8 with White FHP SMS
Nylon #8 with Brown FHP SMS
Nylon #8 with Black FHP SMS
Zip Hanger - No Screw Needed!
10
10
20
10
10
10
10
10
5
5
5
5
5
5
5
5
008236047783
008236429084
008236429107
008236429121
008236429145
008236429169
008236429183
008236743494
None
None
None
None
None
None
None
None
8
8
6
8
8
8
8
-
50
50
30
50
50
50
50
50
-
-
-
Nylon #6 Screws Not Included
Nylon #8 Screws Not Included
Zinc #6 Screws Not Included
Zinc #8 Screws Not Included
100
100
100
100
-
075352644202
075352644271
075352644226
075352644240
None
None
None
None
6
8
6
8
30
50
30
50
-
-
-
1
1
008236109405
None
8
50
-
-
-
1
1
008236429428
None
8
50
-
-
-
373516
Pieces
per
Pak
Size
Contents per Pack: 4-6-8x7/8" (50pcs.), PHS
8-10-12 x 1-1/4" with PHP SMS
373517
Contents per Pack: 8-10-12x1-1/4"(50pcs.), PHS
373518
Contents per Pack: 12-14-16x1-1/2"(50pcs.), PHS
12-14-16 x 1-1/2" with PHP SMS
Brick
Wallboard Anchor
Item #
Fas-Pak
5089
9413
9414
9415
9416
9417
9418
XL-Pak
41408
41409
41410
41440
41441
41442
41443
41989
C-Pak
375316
375317
375318
375319
Kit
375203
375204
DWO
HOLLOW WALL ANCHORS
• Nopredrilling
Size
Contents per Pack: #8 Zinc (25pcs.), PHP SMS (25pcs.),
#2 Phillips Bit
Contents per Pack: #8 Nylon (25pcs.), PHP SMS (25pcs.),
#2 Phillips Bit
Brick
4
Zip-All® Anchor
Item #
NEW!
DWO
• Worksinallmaterials:Drywall,Wood,Plaster,Concrete&Block
• Mustpre-drillforPlaster,Concrete&Blockapplications
• Easilypenetrateswoodstuds
C-Pak
375627
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Screw Size
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
-
008236992489
None
6 or 8
50
-
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Screw Size
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
Utility Wall Hook
2
10
008236032246
Up to 1/4"
5
-
-
-
Utility Wall Hook
50
-
008236107326
Up to 1/4"
5
-
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
1/8 X-Short
1/8 Short
1/8 Long
3/16 Short
3/16 Long
1/4 Short
1/4 Long
2
2
2
2
2
2
2
10
10
10
6
6
6
6
008236032147
008236032154
008236032161
008236032178
008236032185
008236032192
008236032208
5/16"
5/16"
5/16"
3/8"
3/8"
7/16"
7/16"
1/8"-1/4"
3/8"-1/2"
5/8"-1"
3/8"-5/8"
3/4"-1-1/8"
3/8"-1/2"
5/8"-1-1/8"
60
60
60
70
70
80
80
-
-
-
1/8 X-Short
1/8 Short
1/8 Long
3/16 Short
3/16 Long
1/4 Long
20
20
20
15
10
5
5
5
5
5
5
5
008236047639
008236047646
008236047653
008236047660
008236047677
008236427394
5/16"
5/16"
5/16"
3/8"
3/8"
7/16"
1/8"-1/4"
3/8"-1/2"
5/8"-1"
3/8"-5/8"
3/4"-1-1/8"
5/8"-1-1/8"
60
60
60
70
70
80
-
-
-
1/8 X-Short
1/8 Short
1/8 Long
1/8 X-Long
3/16 Short
3/16 Long
3/16 X-Long
1/4 Short
1/4 Long
1/4 X-Long
50
50
50
40
25
25
25
25
25
25
-
008236561869
008236561883
008236561906
008236561920
008236561944
008236561968
008236561982
008236562002
008236562026
008236562040
5/16"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
7/16"
7/16"
7/16"
1/8"-1/4"
3/8"-1/2"
5/8"-1"
1-1/4"-1-1/2"
3/8"-5/8"
3/4"-1-1/8"
1-1/4"-1-3/4"
3/8"-1/2"
5/8"-1-1/8"
1-1/4"-1-3/4"
60
60
60
70
70
70
70
80
80
80
-
-
-
1/8 X-Short
1/8 Short
1/8 Long
1/8 LS (Multi-Grip Range)
1/8 X-Long
3/16 Short
3/16 Long
3/16 X-Long
1/4 Short
1/4 Long
1/4 X-Long
1/8 Short Hex Head
1/8 Long Hex Head
100
100
100
100
100
50
50
50
50
50
50
100
100
-
008236106503
008236106510
008236106527
008236106534
008236106541
008236106558
008236106565
008236106572
008236106589
008236106596
008236106602
008236106619
008236106626
5/16"
5/16"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
7/16"
7/16"
7/16"
5/16"
5/16"
1/8"-1/4"
3/8"-1/2"
5/8"-1"
1/8"-13/16"
1-1/4"-1-1/2"
3/8"-5/8"
3/4"-1-1/8"
1-1/4"-1-3/4"
3/8"-1/2"
5/8"-1-1/8"
1-1/4"-1-3/4"
3/8"-1/2"
5/8"-1"
60
60
60
60
60
70
70
70
80
80
80
60
60
-
-
-
Size
Zip-All Anchor Zinc
Item #
DWO
Wallhook
Fas-Pak
5020
C-Pak
370222
Size
Fas-Pak
5000
5003
5006
5009
5012
5013
5014
XL-Pak
41298
41300
41302
41304
41306
41307
Mini Box
372525
372526
372527
372528
372529
372530
372531
372532
372533
372534
C-Pak
370000
370003
370006
370007
370009
370012
370015
370018
370021
370024
370027
370028
370029
DWO
Item #
Size
Brick
HOLLOW WALL ANCHORS
Hollow Wall Anchor
5
Drive Wall Anchor
Item #
DWO
• Nopredrilling
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/8 X-Short
1/8 Short
1/8 Long
2
2
2
2
10
10
6
10
008236032239
008236032215
008236427417
008236032222
None
None
None
None
1/8"-1/4"
3/8"-1/2"
5/8"-1"
1/8"-13/16"
60
60
60
60
-
-
-
1/8 X-Short
1/8 Short
1/8 Long
20
20
20
20
5
5
5
5
008236427455
008236047684
008236427431
008236047691
None
None
None
None
1/8"-1/4"
3/8"-1/2"
5/8"-1"
1/8"-13/16"
60
60
60
60
-
-
-
1/8 X-Short
1/8 Short
1/8 Long
50
50
40
40
-
008236562101
008236562125
008236562149
008236562163
None
None
None
None
1/8"-1/4"
3/8"-1/2"
5/8"-1"
1/8"-13/16"
60
60
60
60
-
-
-
1/8 X-Short
1/8 Short
1/8 Long
100
100
100
100
-
008236106633
008236106640
008236106657
008236106664
None
None
None
None
1/8"-1/4"
3/8"-1/2"
5/8"-1"
1/8"-13/16"
60
60
60
60
-
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/8" Small with Pan Head Combo SMS & Pin
3/8" Medium with Pan Head Combo SMS & Pin
5/8" Large with Pan Head Combo SMS & Pin
2
2
2
10
6
6
008236032536
008236032543
008236032550
5/16"
5/16"
5/16"
1/8"-1/4"
3/8"-1/2"
5/8"-3/4"
40
60
80
-
-
-
1/8" Small - Screws Not Included
3/8" Medium - Screws Not Included
5/8" Large - Screws Not Included
1/8" Small with Pan Head Combo SMS & Pin
3/8" Medium with Pan Head Combo SMS & Pin
5/8" Large with Pan Head Combo SMS & Pin
13
13
13
10
10
10
5
5
5
5
5
5
008236743463
008236743470
008236743487
008236047790
008236047806
008236429329
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
1/8"-1/4"
3/8"-1/2"
5/8"-3/4"
1/8"-1/4"
3/8"-1/2"
5/8"-3/4"
40
60
80
40
60
80
-
-
-
1/8" Small with Pin, Screws Not Included
3/8" Medium with Pin, Screws Not Included
5/8" Large with Pin, Screws Not Included
100
100
100
-
008236580716
008236508758
008236508765
5/16"
5/16"
5/16"
1/8"-1/4"
3/8"-1/2"
5/8"-3/4"
40
60
80
-
-
-
Size
Pop-ToggleTM
Item #
Fas-Pak
5102
5104
5106
XL-Pak
41986
41987
41988
41412
41414
41415
C-Pak
375366
375370
375374
DWO
HOLLOW WALL ANCHORS
Fas-Pak
5019
5015
5017
5018
XL-Pak
41329
41330
41328
41332
Mini Box
372537
372538
372539
372540
C-Pak
370030
370033
370035
370036
Size
6
Zip-Toggle®
Item #
DWO
• Nopredrilling
Fas-Pak
9419
XL-Pak
41444
C-Pak
375320
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
Zinc with 6 x 2 PHP SMS
2
6
008236429268
None
3/8"-5/8"
70
-
-
-
10
5
008236429305
None
3/8"-5/8"
70
-
-
-
50
-
075352644264
None
3/8"-5/8"
70
-
-
-
Size
Strap-ToggleTM
Item #
DWO
• Self-drilling
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
3/16" with 3/16 x 2-1/2" RH Combo MS
1/4" with 1/4 x 2-1/2" RH Combo MS
2
2
3
3
008236743449
008236743456
1/2"
1/2"
3/8"-2-1/2"
3/8"-2-1/2"
70
80
-
185
330
-
3/16" Screws Not Included
1/4" Screws Not Included
20
20
008236743425
008236743401
1/2"
1/2"
3/8"-2-1/2"
3/8"-2-1/2"
70
80
-
185
330
-
Size
Toggle Bolt
Item #
Bag
370040
370043
370046
370052
370055
370058
370061
370064
370067
370070
370073
370076
370082
370091
370097
370103
Fas-Pak
5021
5024
5025
5027
5028
5030
5031
Size
HOLLOW WALL ANCHORS
XL-Pak
41984
41985
C-Pak
375357
375358
DWO
Newgn!
i
Des
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/8 x 2"
1/8 x 3"
1/8 x 4"
3/16 x 2"
3/16 x 3"
3/16 x 4"
3/16 x 5"
3/16 x 6"
1/4 x 3"
1/4 x 4"
1/4 x 5"
1/4 x 6"
5/16 x 4"
5/16 x 6"
3/8 x 4"
3/8 x 6"
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
50
50
50
25
25
25
25
25
25
25
25
25
20
20
20
20
008236430943
008236324402
008236430967
008236430981
008236431001
008236431025
008236431049
008236431063
008236431087
008236431100
008236431124
008236431148
008236431162
008236431186
008236431209
008236431223
7/16"
7/16"
7/16"
9/16"
9/16"
9/16"
9/16"
9/16"
3/4"
3/4"
3/4"
3/4"
7/8"
7/8"
1"
1"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 4-1/4"
3/8" - 5-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 4-1/4"
3/8" - 5-1/4"
3/8" - 3-1/4"
3/8" - 5-1/4"
3/8" - 3-1/4"
3/8" - 5-1/4"
50
50
50
70
70
70
70
70
90
90
90
90
90
90
90
90
-
45
45
45
85
85
85
85
85
85
85
85
85
100
100
175
175
-
1/8 x 2"
1/8 x 3"
1/8 x 4"
3/16 x 3"
3/16 x 4"
1/4 x 3"
1/4 x 4"
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
2
2
2
2
2
1
1
10
10
6
10
6
6
6
008236032253
008236032260
008236032277
008236032284
008236032291
008236032307
008236032314
7/16"
7/16"
7/16"
9/16"
9/16"
3/4"
3/4"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
50
50
50
70
70
90
90
-
45
45
45
85
85
85
85
continued
7
HOLLOW WALL ANCHORS
Item #
DWO
Toggle Bolt, continued
XL-Pak
41420
41422
41423
41426
41427
41428
41429
Mini Box
372500
372501
372502
372503
372504
372505
372509
372510
372513
372514
372517
372518
C-Pak
370039
370042
370045
370051
370054
370057
370060
370063
370066
370069
370072
370075
370078
370081
370084
370090
370093
370096
370099
370102
370105
370107
370108
370109
370110
370111
Size
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/8 x 2"
1/8 x 3"
1/8 x 4"
3/16 x 3"
3/16 x 4"
1/4 x 3"
1/4 x 4"
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
15
15
12
10
8
6
5
5
5
5
5
5
5
5
008236047813
008236047820
008236428902
008236047837
008236428926
008236428940
008236428964
7/16"
7/16"
7/16"
9/16"
9/16"
3/4"
3/4"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
50
50
50
70
70
90
90
-
45
45
45
85
85
85
85
-
1/8 x 2"
1/8 x 3"
1/8 x 4"
3/16 x 2"
3/16 x 3"
3/16 x 4"
1/4 x 3"
1/4 x 4"
5/16 x 3"
5/16 x 4"
3/8 x 3"
3/8 x 4"
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
25
25
25
25
25
25
15
15
10
10
10
8
-
008236561609
008236561623
008236561647
008236561661
008236561685
008236561708
008236561746
008236561760
008236561784
008236561807
008236561821
008236561845
7/16"
7/16"
7/16"
9/16"
9/16"
9/16"
3/4"
3/4"
7/8"
7/8"
1"
1"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
50
50
50
70
70
70
90
90
90
90
90
90
-
45
45
45
85
85
85
85
85
100
100
175
175
-
1/8 x 2"
1/8 x 3"
1/8 x 4"
3/16 x 2"
3/16 x 3"
3/16 x 4"
3/16 x 5"
3/16 x 6"
1/4 x 3"
1/4 x 4"
1/4 x 5"
1/4 x 6"
5/16 x 3"
5/16 x 4"
5/16 x 5"
5/16 x 6"
3/8 x 3"
3/8 x 4"
3/8 x 5"
3/8 x 6"
1/2 x 4"
1/2 x 5"
1/2 x 6"
1/8 x 2"
1/8 x 3"
1/8 x 4"
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Truss Head
Truss Head
Truss Head
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
10
10
10
50
50
50
-
008236106688
008236106695
008236106718
008236106725
008236106732
008236106749
008236106756
008236106763
008236106770
008236106787
008236106794
008236106800
008236106817
008236106824
008236106831
008236106848
008236106855
008236106862
008236106879
008236106886
008236106893
008236106909
008236106916
008236106923
008236106930
008236106947
7/16"
7/16"
7/16"
9/16"
9/16"
9/16"
9/16"
9/16"
3/4"
3/4"
3/4"
3/4"
7/8"
7/8"
7/8"
7/8"
1"
1"
1"
1"
1-1/4"
1-1/4"
1-1/4"
7/16"
7/16"
7/16"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 4-1/4"
3/8" - 5-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 4-1/4"
3/8" - 5-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 4-1/4"
3/8" - 5-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
3/8" - 4-1/4"
3/8" - 5-1/4"
3/8" - 3-1/4"
3/8" - 4-1/4"
3/8" - 5-1/4"
3/8" - 1-1/4"
3/8" - 2-1/4"
3/8" - 3-1/4"
50
50
50
70
70
70
70
70
90
90
90
90
90
90
90
90
90
90
90
90
120
120
120
50
50
50
-
45
45
45
85
85
85
85
85
85
85
85
85
100
100
100
100
175
175
175
175
200
200
200
45
45
45
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Wall Thickness
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
50
50
10
-
008236106954
008236106961
008236106978
008236106985
008236106992
008236107005
-
-
-
-
-
Item #
C-Pak
370114
370117
370120
370123
370126
370129
DWO
Toggle Wing Only
Size
1/8"
3/16"
1/4"
5/16"
3/8"
1/2"
8
SOLID WALL ANCHORS
Nylon Anchor
FOR
USE
WITH
PRESSURE
Item #
DWO
TREATED
LUMBER
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
3/16 x 1"
1/4 x 3/4"
1/4 x 1"
1/4 x 1-1/2"
1/4 x 2"
1/4 x 3"
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
4
4
4
4
2
2
6
6
6
6
6
6
008236428124
008236428148
008236428209
008236428223
008236428247
008236428261
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
3/4"
5/8"
3/4"
3/4"
3/4"
3/4"
-
45
35
60
60
70
70
35
20
35
35
40
-
30
30
40
45
50
-
3/16 x 1"
1/4 x 3/4"
1/4 x 1"
1/4 x 1-1/2"
1/4 x 2"
1/4 x 3"
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
20
20
20
15
10
8
5
5
5
5
5
5
008236428780
008236428803
008236428827
008236428841
008236428865
008236428889
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
3/4"
5/8"
3/4"
3/4"
3/4"
3/4"
-
45
35
60
60
70
70
35
20
35
35
40
-
30
30
40
45
50
-
1/4 x 1-1/2"
3/16 x 3/4"
3/16 x 1"
1/4 x 3/4"
1/4 x 1"
1/4 x 1-1/2"
1/4 x 2"
1/4 x 3"
1/4 x 4"
3/16 x 1"
3/16 x 1-1/2"
1/4 x 1"
1/4 x 1-1/2"
1/4 x 2"
Nylon Washer
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
Truss Head
Round Head
Round Head
Round Head
Round Head
Round Head
100
100
100
100
100
100
100
100
100
100
100
100
100
100
-
008236107869
008236107906
008236107920
008236107975
008236108002
008236108033
008236108064
008236108088
008236108095
008236107913
008236107944
008236107999
008236108026
008236108057
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/16"
3/16"
1/4"
1/4"
1/4"
5/8"
3/4"
5/8"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
-
20
45
35
60
60
70
70
70
45
50
60
60
70
20
35
20
35
35
40
35
35
35
35
40
15
30
30
40
45
50
30
30
40
45
50
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/4 x 1"
1/4 x 1-1/4"
1/4 x 1-1/2"
1/4 x 2"
2
2
2
2
6
6
6
6
008236427899
008236427936
008236427967
008236428001
1/4"
1/4"
1/4"
1/4"
3/4"
3/4"
3/4"
3/4"
-
260
260
285
325
145
215
-
160
190
-
1/4 x 1"
1/4 x 1-1/4"
1/4 x 1-1/2"
1/4 x 2"
16
12
12
10
5
5
5
5
008236428704
008236428728
008236428742
008236428766
1/4"
1/4"
1/4"
1/4"
3/4"
3/4"
3/4"
3/4"
-
260
260
285
325
145
215
-
160
190
-
3/16 x 7/8"
1/4 x 3/4"
1/4 x 1"
1/4 x 1-1/4"
1/4 x 1-1/2"
1/4 x 2"
1/4 x 3"
100
100
100
100
100
100
100
-
008236108996
008236109009
008236109016
008236109023
008236109030
008236109047
008236926163
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
3/4"
5/8"
3/4"
3/4"
3/4"
3/4"
3/4"
-
125
150
260
260
285
325
325
55
70
145
215
-
90
115
160
190
-
Item #
NEW!
Fas-Pak
9403
9404
9405
9406
XL-Pak
41430
41431
41432
41433
C-Pak
372051
372053
372054
372057
372060
372063
372064
DWO
Hammer Drive Anchor
Size
SOLID WALL ANCHORS
Fas-Pak
9407
9408
9409
9410
9411
9412
XL-Pak
41434
41435
41436
41437
41438
41439
C-Pak
370511
370516
370525
370540
370549
370558
370567
370573
370576
370522
370531
370546
370555
370564
Size
9
Fas-Pak
9422
9423
9424
C-Pak
371200
371202
371203
371204
371205
371206
371209
371210
371233
371211
371213
371214
371215
371217
371216
371218
371219
371220
371221
Size
1/4 x 2"
1/4 x 2-1/2"
1/4 x 3"
Flat Head
Flat Head
Flat Head
3/16 x 1"
3/16 x 1-1/2"
1/4 x 1-1/4"
1/4 x 1-1/2"
1/4 x 2"
1/4 x 2-1/2"
3/8 x 2-1/2"
3/8 x 3-1/2"
1/2 x 3"
3/16 x 1"
3/16 x 1-1/2"
3/16 x 2"
3/16 x 2-1/2"
1/4 x 1-1/2"
1/4 x 2"
1/4 x 2-1/2"
1/4 x 3"
1/4 x 3-1/2"
1/4 x 4"
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Round Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
2
2
2
10
10
10
008236429350
008236429367
008236429381
1/4"
1/4"
1/4"
1-1/8"
1-1/8"
1-1/8"
-
440
440
440
-
-
100
100
100
100
100
100
25
25
25
100
100
100
100
100
100
100
100
100
100
-
008236108767
008236108774
008236108781
008236108798
008236108804
008236108811
008236108835
008236108842
008236108958
008236108859
008236108866
008236108873
008236108880
008236108903
008236108897
008236108910
008236108927
008236108934
008236108941
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
1/2"
3/16"
3/16"
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
7/8"
7/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-7/8"
1-7/8"
2-5/8"
7/8"
7/8"
7/8"
7/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
-
270
270
440
440
440
440
1050
1050
1225
270
270
270
270
440
440
440
440
440
440
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
100
50
50
50
50
25
25
25
-
008236767551
008236767575
008236767599
008236767612
008236767476
008236767490
008236767513
008236767537
008236767636
008236767650
008236767674
3/16"
3/16"
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
7/8"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-3/4"
1-3/4"
1-3/4"
-
200
315
315
315
350
350
350
350
650
650
650
50
140
140
140
160
160
160
160
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
100
-
008236806069
008236806083
008236806106
008236806120
1/4"
1/4"
1/4"
1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
-
350
350
350
350
160
160
160
160
-
Spike® Anchor
Steel/Zinc
Item #
DWO
SOLID WALL ANCHORS
Item #
DWO
Drive® Anchor
C-Pak
371184
371185
371186
371187
371180
371181
371182
371183
371188
371189
371190
Size
3/16 x 1-1/4"
3/16 x 1-1/2"
3/16 x 2"
3/16 x 3"
1/4 x 1-1/2"
1/4 x 2"
1/4 x 2-1/2"
1/4 x 3"
3/8 x 2"
3/8 x 3"
3/8 x 4"
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
Spike® Anchor
Black Perma-Seal™ Coated
FOR
USE
WITH
PRESSURE
Item #
C-Pak
371168
371169
371170
371171
DWO
TREATED
LUMBER
Size
1/4 x 2"
1/4 x 2-1/2"
1/4 x 3"
1/4 x 3-1/2"
Mushroom Head
Mushroom Head
Mushroom Head
Mushroom Head
10
Spike® Anchor
316 Stainless Steel
FOR
USE
WITH
PRESSURE
Item #
DWO
TREATED
LUMBER
C-Pak
371172
371173
371174
Size
1/4 x 2"
1/4 x 2-1/2"
1/4 x 3"
Mushroom Head
Mushroom Head
Mushroom Head
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
-
075352066264
075352066288
075352066301
1/4"
1/4"
1/4"
1-1/4"
1-1/4"
1-1/4"
-
340
340
340
150
150
150
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
100
100
100
100
100
100
100
100
100
-
008236107623
008236107630
008236107647
008236107654
008236107661
008236107678
008236107685
008236107692
008236107708
3/16"
3/16"
3/16"
3/16"
1/4"
1/4"
1/4"
1/4"
1/4"
5/8"
3/4"
3/4"
3/4"
5/8"
3/4"
3/4"
3/4"
3/4"
Item #
DWO
Masonry Drive Pin
3/16 x 3/4"
3/16 x 1"
3/16 x 1-1/8"
3/16 x 1-1/4"
1/4 x 3/4"
1/4 x 1"
1/4 x 1-1/8"
1/4 x 1-1/4"
1/4 x 1-1/2"
C-90
Block
Brick
SOLID WALL ANCHORS
C-Pak
370408
370411
370414
370417
370420
370423
370426
370429
370432
Size
Lead Wood Screw Anchor
Screws Not Included
Item #
Fas-Pak
5072
5075
5078
5084
5087
C-Pak
370237
370240
370243
370245
370246
370249
370252
370255
DWO
Warning: This product is not sold in the state of California due to proposition 65.
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
6-8 x 3/4"
6-8 x 1"
6-8 x 1-1/2"
10-14 x 1"
10-14 x 1-1/2"
3
3
3
3
2
10
10
10
10
10
008236032451
008236032468
008236032475
008236032482
008236032499
1/4"
1/4"
1/4"
5/16"
5/16"
3/4"
1"
1-1/2"
1"
1-1/2"
-
50
50
50
140
140
15
15
15
80
80
15
15
15
65
65
6-8 x 3/4"
6-8 x 1"
6-8 x 1-1/2"
10-14 x 3/4"
10-14 x 1"
10-14 x 1-1/2"
16-18 x 1"
16-18 x 1-1/2"
100
100
100
100
100
100
100
50
-
008236107333
008236107340
008236107357
008236107364
008236107371
008236107388
008236107395
008236107401
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
3/8"
3/8"
3/4"
1"
1-1/2"
3/4"
1"
1-1/2"
1"
1-1/2"
-
50
50
50
125
140
140
225
300
15
15
15
80
80
80
150
150
15
15
15
65
65
65
175
175
Size
11
Item #
DWO
Single Machine Bolt Anchor
C-Pak
370354
370372
370375
370378
370381
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
50
50
50
25
25
-
008236107524
008236107586
008236107593
008236107609
008236107616
1/2"
5/8"
5/8"
7/8"
1"
1-3/8"
1-5/8"
1-5/8"
2-1/2"
2-3/4"
-
400
525
725
1225
2050
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
50
50
50
25
25
-
008236109153
008236109160
008236109177
008236109184
008236109191
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
1-3/4"
2-1/4"
2-1/2"
-
400
550
875
1525
1750
-
-
Size
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
Yellow 1-3 x 1"
White 4-6 x 3/4"
White 4-6 x 1"
White 4-6 x 1-1/2"
Red 7-9 x 3/4"
Red 7-9 x 1"
Red 7-9 x 1-1/2"
Green 10-12 x 1"
Green 10-12 x 1-1/4"
Green 10-12 x 1-1/2"
Green 10-12 x 2"
Blue 1/4 x 1"
Blue 1/4 x 1-1/2"
Blue 1/4 x 2"
Orange 5/16 x 1"
Orange 5/16 x 1-1/2"
Orange 5/16 x 2"
Orange 5/16 x 2-1/2"
Gray 3/8 x 1-1/2"
Gray 3/8 x 2"
Gray 3/8 x 2-1/2"
Gray 3/8 x 3"
Black 1/2 x 3-1/2"
500
1000
500
500
1000
500
500
500
500
500
250
500
500
250
200
100
100
100
200
100
100
100
48
-
011398103013
011398103020
011398103037
011398103044
011398103051
011398103068
011398103075
011398103082
011398103099
011398103105
011398103112
011398103129
011398103136
011398103143
011239103165
011398103174
011398103181
011398103198
011398103204
011398103211
011398103228
011398103235
011398103259
5/32"
13/64"
13/64"
13/64"
15/64"
15/64"
15/64"
9/32"
9/32"
9/32"
9/32"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
15/32"
15/32"
15/32"
15/32"
9/16"
1"
3/4"
1"
1-1/2"
3/4"
1"
1-1/2"
1"
1-1/4"
1-1/2"
2"
1"
1-1/2"
2"
1"
1-1/2"
2"
2-1/2"
1-1/2"
2"
2-1/2"
3"
3-1/2"
-
5
40
50
60
40
50
70
60
80
90
130
70
100
130
70
90
140
160
300
350
400
420
420
-
-
Size
1/4"
5/16"
3/8"
1/2"
5/8"
Item #
DWO
Double Machine Bolt Anchor
C-Pak
372100
372103
372106
372109
372112
Size
1/4"
5/16"
3/8"
1/2"
5/8"
Item #
C-Pak
370700
370703
370706
370709
370712
370715
370718
370721
370724
370727
370730
370733
370736
370739
370745
370748
370751
370754
370757
370760
370763
370766
370772
DWO
SOLID WALL ANCHORS
Wallplug Anchor
Screws Not Included
12
SharkieTM
Item #
NEW!
NEW!
NEW!
DWO
• Worksinsolidandhollowwalls
• Insolidwalls,anchorexpandswithinholegrippingtheentirescrewlength
• Inhollowwalls,theanchorjawsopenbehindmateriallockinganchorinplace
C-Pak
375628
375629
375630
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Screw Size
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
50
-
008236992502
008236992526
008236992540
3/16"
1/4"
5/16"
#4-#10
#6-#12
#8-#14
30
35
40
75
80
70
80
75
60
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
100
100
100
50
50
50
-
008236174922
008236174946
008236174960
008236174984
008236175004
008236175028
5/16"
5/16"
5/16"
7/16"
7/16"
7/16"
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/4" Long
5/16" Long
3/8" Long
1/2" Long
1/4" Short
5/16" Short
3/8" Short
1/2" Short
2
2
1
1
2
2
1
1
25
25
25
20
25
25
25
20
008236424362
008236424386
008236424409
008236396355
008236424423
008236424447
008236424461
008236396379
1/2"
1/2"
5/8"
3/4"
1/2"
1/2"
5/8"
3/4"
1-1/2"
1-3/4"
2-1/2"
3"
1"
1-1/4"
1-3/4"
2"
-
160
200
385
535
75
150
300
425
45
70
160
20
50
85
240
240
1/4" Long
5/16" Long
3/8" Long
1/4" Short
5/16" Short
3/8" Short
2
2
1
2
2
1
10
10
6
10
10
6
008236032376
008236032390
008236032413
008236032369
008236032383
008236032406
1/2"
1/2"
5/8"
1/2"
1/2"
5/8"
1-1/2"
1-3/4"
2-1/2"
1"
1-1/4"
1-3/4"
-
160
200
385
75
150
300
45
70
160
50
85
240
1/4" Long
5/16" Long
3/8" Long
1/2" Long
1/4" Short
5/16" Short
3/8" Short
1/2" Short
40
40
12
8
50
50
20
10
-
008236433586
008236433609
008236433623
008236433647
008236433500
008236433524
008236433548
008236433562
1/2"
1/2"
5/8"
3/4"
1/2"
1/2"
5/8"
3/4"
1-1/2"
1-3/4"
2-1/2"
3"
1"
1-1/4"
1-3/4"
2"
-
160
200
385
535
75
150
300
425
45
70
160
20
50
85
240
240
1/4" Long
5/16" Long
3/8" Long
1/2" Long
5/8" Long
3/4" Long
1/4" Short
5/16" Short
3/8" Short
1/2" Short
5/8" Short
3/4" Short
100
100
50
50
25
10
100
100
50
50
25
10
-
008236107203
008236107210
008236107227
008236107234
008236107241
008236107258
008236107265
008236107272
008236107289
008236107296
008236107302
008236107319
1/2"
1/2"
5/8"
3/4"
7/8"
1"
1/2"
1/2"
5/8"
3/4"
7/8"
1"
1-1/2"
1-3/4"
2-1/2"
3"
3-1/2"
3-1/2"
1"
1-1/4"
1-3/4"
2"
2"
2"
-
160
200
385
535
630
670
75
150
300
425
440
550
45
70
160
200
-
50
85
240
240
-
Size
#4-10
#6-12
#8-14
Item #
DWO
T-Anchor
C-Pak
370264
370265
370266
370270
370271
370272
Size
1/4 x 1-3/4"
1/4 x 2-1/2"
1/4 x 3-1/4"
3/8 x 3-1/4"
3/8 x 3-3/4"
3/8 x 4-1/2"
C-90
Block
Brick
Bag
370187
370190
370193
370196
370205
370208
370211
370214
Fas-Pak
5048
5054
5060
5045
5051
5057
Mini Box
370206
370209
370212
370215
370188
370191
370194
370197
C-Pak
370186
370189
370192
370195
370198
370201
370204
370207
370210
370213
370216
370219
DWO
Item #
Size
SOLID WALL ANCHORS
Lag Shield
13
Machine Screw Anchor
Item #
DWO
Warning: This product is not sold in the state of California due to proposition 65.
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
5
5
5
5
5
5
5
1
1
-
008236324815
008236324822
008236324839
008236324846
008236324853
008236324860
008236324877
008236107180
008236107197
-
-
-
-
-
-
10/24
1/4-20
5/16-18
2
2
1
10
10
6
008236032505
008236032512
008236032529
3/8"
1/2"
5/8"
5/8"
7/8"
1"
-
235
350
515
140
175
295
175
290
345
6-32
8-32
10-24
1/4-20
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
100
100
100
100
50
50
50
25
25
-
008236107012
008236107029
008236107036
008236107050
008236107067
008236107074
008236107081
008236107098
008236107104
5/16"
5/16"
3/8"
1/2"
5/8"
3/4"
7/8"
1-1/8"
1-1/4"
1/2"
1/2"
5/8"
7/8"
1"
1-1/4"
1-1/2"
1-3/4"
2-1/4"
-
70
160
235
350
515
775
1075
1075
1075
50
110
140
175
295
340
470
470
470
60
130
175
290
345
440
640
640
640
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
1/4" Setting Tool
3/8" Setting Tool
1/2" Setting Tool
1/4"
3/8"
1/2"
1
1
1
1
1
1
10
10
10
50
25
25
008236430608
008236430622
008236430646
008236430547
008236430561
008236430585
3/8"
1/2"
5/8"
1"
1-9/16"
2"
-
495
1045
1440
-
-
1/4" Setting Tool
3/8" Setting Tool
1/2" Setting Tool
5/8" Setting Tool
3/4" Setting Tool
1
1
1
1
1
-
008236109108
008236109115
008236109122
008236109139
008236109146
-
-
-
-
-
-
100
50
50
25
25
-
008236109054
008236109061
008236109078
008236109085
008236109092
3/8"
1/2"
5/8"
7/8"
1"
1"
1-9/16"
2"
2-1/2"
3-3/16"
-
495
1045
1440
1860
3600
-
-
Setting Tool
Setting Tool
Setting Tool
Setting Tool
Setting Tool
Setting Tool
Setting Tool
Setting Tool
Setting Tool
No. 6
No. 8
No.10
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
Drop-In Anchor
Item #
DWO
SOLID WALL ANCHORS
Setting Tools
370159
370162
370165
370168
370171
370174
370177
370180
370183
Fas-Pak
5090
5093
5096
C-Pak
370132
370135
370138
370141
370144
370147
370150
370153
370156
Pieces
per
Pak
Size
Bag
372096
372097
372098
372086
372087
372088
Setting Tools
372090
372092
372093
372094
372095
C-Pak
372080
372082
372083
372084
372085
Size
1/4"
3/8"
1/2"
5/8"
3/4"
Brick
14
Item #
DWO
Tapper+® Drill Bits and Installation Tools
Size
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1
-
075352643472
-
-
-
-
-
-
1
5
008236433180
-
-
-
-
-
-
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
075352643342
075352643366
075352643380
075352643403
075352643427
075352643441
008236767711
008236767735
-
-
-
-
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
Tools
Tapper 1000 Installation Tool
Contents per Pack: drill adapter, Phillips bit
adapter, drive sleeve, #2 & 3 Phillips bits,
1/4 & 5/16 hex drivers, hex key
XL-Pak Tapper Installation Tool
Contents per Pack: #2 & 3 Phillips bits,
1/4 & 5/16 hex drivers, Phillips socket, hex key
375000
375009
Drill Bits
375220
375221
375222
375223
375224
375225
375226
375227
5/32 x 3-1/2"
5/32 x 4-1/2"
5/32 x 5-1/2"
3/16 x 3-1/2"
3/16 x 4-1/2"
3/16 x 5-1/2"
3/16 x 6-1/2"
3/16 x 7-1/2"
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Tapper+® Concrete Screw Anchors
Use with Tapper Bits for Best Performance
BLUE Perma-Seal™ Coated
FOR
USE
WITH
PRESSURE
Fas-Pak
8961
8962
8963
8964
8965
8966
8967
8968
8969
8970
8971
8972
8973
8974
8975
8976
8977
8978
8979
8980
8981
8982
8983
8984
XL-Pak
41553
41554
41555
41556
41557
41558
41559
41560
41561
41562
41563
41564
41565
41566
41567
41568
41569
41570
41571
41572
Size
3/16 x 1-1/4"
3/16 x 1-3/4"
3/16 x 2-1/4"
3/16 x 2-3/4"
3/16 x 3-1/4"
3/16 x 3-3/4"
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
3/16 x 1-1/4"
3/16 x 1-3/4"
3/16 x 2-1/4"
3/16 x 2-3/4"
3/16 x 3-1/4"
3/16 x 3-3/4"
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
5
5
4
4
3
3
5
5
4
4
3
3
5
5
4
4
3
3
5
5
4
4
3
3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
008236185997
008236186000
008236186017
008236186024
008236186031
008236186048
008236186055
008236186062
008236186079
008236186086
008236186093
008236186109
008236186154
008236186161
008236186178
008236186185
008236186192
008236186208
008236186215
008236187168
008236187175
008236186246
008236186253
008236186260
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
-
90
230
235
235
235
235
205
355
370
370
370
370
90
230
235
235
235
235
205
355
370
370
370
370
70
95
95
95
95
95
90
190
190
190
190
190
70
95
95
95
95
95
90
190
190
190
190
190
100
195
210
210
210
210
150
210
225
225
225
225
100
195
210
210
210
210
150
210
225
225
225
225
3/16 x 1-1/4"
3/16 x 1-3/4"
3/16 x 2-1/4"
3/16 x 2-3/4"
3/16 x 3-1/4"
3/16 x 3-3/4"
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 2-3/4"
1/4 x 3-1/4"
1/4 x 3-3/4"
3/16 x 1-1/4"
3/16 x 1-3/4"
3/16 x 2-1/4"
3/16 x 2-3/4"
3/16 x 3-1/4"
3/16 x 3-3/4"
1/4 x 1-1/4"
1/4 x 1-3/4"
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
25
25
20
20
15
15
25
18
15
12
10
10
25
25
20
20
15
15
25
18
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
008236186390
008236186406
008236186413
008236186420
008236186437
008236186444
008236186451
008236186468
008236186475
008236186482
008236186499
008236186505
008236186277
008236186284
008236186291
008236186307
008236186314
008236186321
008236186338
008236186345
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
-
90
230
235
235
235
235
205
355
370
370
370
370
90
230
235
235
235
235
205
355
70
95
95
95
95
95
90
190
190
190
190
190
70
95
95
95
95
95
90
190
100
195
210
210
210
210
150
210
225
225
225
225
100
195
210
210
210
210
150
210
SOLID WALL ANCHORS
Item #
DWO
TREATED
LUMBER
continued
15
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Tapper+® Concrete Screw Anchors, continued
BLUE Perma-Seal™ Coated
FOR
USE
WITH
PRESSURE
SOLID WALL ANCHORS
Item #
DWO
TREATED
LUMBER
XL-Pak, continued
41573
1/4 x 2-1/4"
41574
1/4 x 2-3/4"
41575
1/4 x 3-1/4"
41576
1/4 x 3-3/4"
C-Pak - Tapper Bit Included
375286
3/16 x 1-1/4"
375287
3/16 x 1-3/4"
375288
3/16 x 2-1/4"
375289
3/16 x 2-3/4"
375290
3/16 x 3-1/4"
375291
3/16 x 3-3/4"
375292
3/16 x 4"
375293
1/4 x 1-1/4"
375294
1/4 x 1-3/4"
375295
1/4 x 2-1/4"
375296
1/4 x 2-3/4"
375297
1/4 x 3-1/4"
375298
1/4 x 3-3/4"
375299
1/4 x 4"
375315
1/4 x 5"
375300
3/16 x 1-1/4"
375301
3/16 x 1-3/4"
375302
3/16 x 2-1/4"
375303
3/16 x 2-3/4"
375304
3/16 x 3-1/4"
375305
3/16 x 3-3/4"
375306
3/16 x 4"
375307
1/4 x 1-1/4"
375308
1/4 x 1-3/4"
375309
1/4 x 2-1/4"
375310
1/4 x 2-3/4"
375311
1/4 x 3-1/4"
375312
1/4 x 3-3/4"
375313
1/4 x 4"
375314
1/4 x 5"
375285
1/4 x 6"
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
15
12
10
10
5
5
5
5
008236186352
008236186369
008236186376
008236186383
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
-
370
370
370
370
190
190
190
190
225
225
225
225
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
-
008236385502
008236385519
008236385526
008236385533
008236385540
008236385557
008236385564
008236385571
008236385588
008236385595
008236385601
008236385618
008236385625
008236385632
008236699791
008236385649
008236385656
008236385663
008236385670
008236385687
008236385694
008236385700
008236385717
008236385724
008236385731
008236385748
008236385755
008236385762
008236385779
008236680188
008236767698
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
-
90
230
235
235
235
235
235
205
355
370
370
370
370
370
370
90
230
235
235
235
235
235
205
355
370
370
370
370
370
370
370
70
95
95
95
95
95
95
90
190
190
190
190
190
190
190
70
95
95
95
95
95
95
90
190
190
190
190
190
190
190
190
100
195
210
210
210
210
210
150
210
225
225
225
225
225
225
100
195
210
210
210
210
210
150
210
210
210
210
210
210
210
210
Size
-
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Tapper+® Concrete Screw Anchors
WHITE Perma-Seal™ Coated
FOR
USE
WITH
PRESSURE
Item #
DWO
TREATED
LUMBER
Size
375321
3/16 x 1-3/4"
375322
3/16 x 2-1/4"
375323
3/16 x 2-3/4"
375324
3/16 x 3-1/4"
375354
1/4 x 1-1/4"
375325
1/4 x 1-3/4"
375326
1/4 x 2-1/4"
375327
1/4 x 2-3/4"
375328
1/4 x 3-1/4"
375329
3/16 x 1-1/4"
375330
3/16 x 1-3/4"
375331
3/16 x 2-1/4"
375332
3/16 x 2-3/4"
375333
3/16 x 3-1/4"
375334
1/4 x 1-3/4"
375335
1/4 x 2-1/4"
375336
1/4 x 2-3/4"
375337
1/4 x 3-1/4"
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
-
075352024028
075352024042
075352024066
075352024080
075352024202
075352024226
075352024240
075352024264
075352895062
075352024400
075352872339
075352024448
075352826035
075352024486
075352024622
075352024646
075352024660
075352887982
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
3/16"
5/32"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
-
230
235
235
235
205
355
370
370
370
90
230
235
235
235
355
370
370
370
95
95
95
95
90
190
190
190
190
70
95
95
95
95
190
190
190
190
195
210
210
210
150
210
225
225
225
100
195
210
210
210
210
225
225
225
16
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Tapper ® Concrete Screw Anchors
410 Stainless Steel
FOR
USE
WITH
PRESSURE
Item #
DWO
TREATED
LUMBER
Size
375338
3/16 x 1-1/4"
375339
3/16 x 1-3/4"
375340
3/16 x 2-1/4"
375341
3/16 x 2-3/4"
375342
1/4 x 1-1/4"
375343
1/4 x 1-3/4"
375344
1/4 x 2-1/4"
375345
1/4 x 2-3/4"
375346
3/16 x 1-1/4"
375347
3/16 x 1-3/4"
375348
3/16 x 2-1/4"
375349
3/16 x 2-3/4"
375350
1/4 x 1-1/4"
375351
1/4 x 1-3/4"
375352
1/4 x 2-1/4"
375353
1/4 x 2-3/4"
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
HWH Slotted
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Flat Head Phillips
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
-
008236805857
008236805871
008236805895
008236805918
075352041100
075352041124
075352041148
075352041162
008236805970
008236805994
008236806014
008236806038
075352041186
075352041209
075352041230
075352041247
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
5/32"
5/32"
5/32"
5/32"
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
-
90
230
235
235
205
355
370
370
90
230
235
235
205
355
370
370
70
95
95
95
90
190
190
190
70
95
95
95
90
190
190
190
100
195
210
210
150
210
225
225
100
195
210
210
150
210
225
225
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
100
-
075352087153
075352087160
075352087061
075352087078
3/16"
3/16"
3/16"
3/16"
1"
1"
1"
1"
-
355
370
355
370
190
190
190
190
210
225
210
225
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
50
50
50
50
25
25
25
25
25
10
10
10
50
25
50
008236429688
008236429701
008236429442
008236429466
008236429480
008236429503
008236429527
008236429541
008236429565
008236429589
008236429602
008236429626
008236325966
008236326024
008236429640
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
1/4"
3/8"
1/4"
1-1/8"
1-1/8"
1-3/8"
1-1/2"
1-5/8"
1-5/8"
2-1/8"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
1-1/8"
1-5/8"
1-1/8"
-
240
240
260
260
385
385
935
935
935
935
1690
1690
240
385
240
240
240
285
285
340
340
490
490
490
490
285
340
240
190
190
225
225
250
250
700
700
700
700
190
250
190
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Hurricane Tapper+® (Large Flange)
Silver and White Perma-Seal™ Coated
FOR
USE
WITH
PRESSURE
DWO
Item #
Size
375438
1/4 x 1-3/4"
375444
1/4 x 2-1/4"
375447
1/4 x 1-3/4"
375450
1/4 x 2-1/4"
Silver
Silver
White
White
SOLID WALL ANCHORS
TREATED
LUMBER
Sleeve Anchor
Item #
DWO
Steel/Zinc
Size
Bag
370789
370791
370797
370799
370801
370803
370805
370807
370809
370811
370815
370817
370860
370878
370865
1/4 x 1-3/8"
1/4 x 2-1/4"
5/16 x 1-1/2"
5/16 x 2-1/2"
3/8 x 1-7/8"
3/8 x 3"
1/2 x 2-1/4"
1/2 x 3"
1/2 x 4"
1/2 x 6"
5/8 x 4-1/4"
5/8 x 6"
1/4 x 1-3/8"
3/8 x 2-3/4"
1/4 x 2"
Acorn Head
Acorn Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Flat Head
Flat Head
Flat Head Threshold
continued
17
Sleeve Anchor, continued
SOLID WALL ANCHORS
Item #
DWO
Steel/Zinc
Mini Box
370823
370824
370825
370826
370827
370828
370829
370830
370831
370850
370851
370852
370853
370854
370855
370856
C-Pak
370788
370790
370796
370798
370800
370802
370804
370806
370808
370810
370812
370813
370814
370816
370818
370820
370821
370822
370860
370862
370864
370866
370868
370874
370878
370880
370882
370884
370898
370912
Size
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/4 x 1-3/8"
1/4 x 2-1/4"
5/16 x 1-1/2"
5/16 x 2-1/2"
3/8 x 1-7/8"
3/8 x 3"
1/2 x 2-1/4"
1/2 x 3"
1/2 x 4"
1/4 x 2"
1/4 x 3"
1/4 x 4"
3/8 x 4"
3/8 x 5"
3/8 x 6"
1/4 x 2"
Acorn Head
Acorn Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Round Head
50
40
35
35
25
20
15
12
10
20
20
20
10
10
10
20
-
008236561487
008236561500
008236561524
008236561548
008236433227
008236433241
008236433265
008236433289
008236433302
008236766196
008236766219
008236766233
008236766257
008236766271
008236766295
008236766318
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
1/2"
1/2"
1/2"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/4"
1-1/8"
1-1/8"
1-3/8"
1-1/2"
1-5/8"
1-5/8"
2-1/8"
2-1/4"
2-1/4"
1-1/8"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-1/2"
-
240
240
260
260
385
385
935
935
935
240
240
240
385
385
385
240
240
240
285
285
340
340
490
490
490
240
240
240
340
340
340
240
190
190
225
225
250
250
700
700
700
190
190
190
250
250
250
190
1/4 x 1-3/8"
1/4 x 2-1/4"
5/16 x 1-1/2"
5/16 x 2-1/2"
3/8 x 1-7/8"
3/8 x 3"
1/2 x 2-1/4"
1/2 x 3"
1/2 x 4"
1/2 x 6"
5/8 x 2-1/4"
5/8 x 3"
5/8 x 4-1/4"
5/8 x 6"
3/4 x 2-1/2"
3/4 x 4-1/4"
3/4 x 5-1/2"
3/4 x 6-1/4"
1/4 x 1-3/8"
1/4 x 2"
1/4 x 2"
1/4 x 3"
1/4 x 4"
5/16 x 3-1/2"
3/8 x 2-3/4"
3/8 x 4"
3/8 x 5"
3/8 x 6"
1/4 x 2"
3/8 x 3-3/4"
Acorn Head
Acorn Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Flat Head
Flat Head
Flat Head Threshold
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Flat Head
Round Head
Round Head
100
100
100
100
50
50
25
25
25
25
25
10
10
10
10
5
5
5
100
100
100
100
100
100
50
50
50
50
100
50
-
008236108262
008236108279
008236108286
008236108293
008236108309
008236108316
008236108323
008236108330
008236108347
008236108354
008236108361
008236108378
008236108385
008236108392
008236108408
008236108415
008236108422
008236108439
008236108507
008236108514
008236108521
008236108538
008236108545
008236108569
008236108583
008236108590
008236108606
008236108613
008236108651
008236108705
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
1/4"
1/4"
1/4"
1/4"
1/4"
5/16"
3/8"
3/8"
3/8"
3/8"
1/4"
3/8"
1-1/8"
1-1/8"
1-3/8"
1-1/2"
1-5/8"
1-5/8"
2-1/8"
2-1/4"
2-1/4"
2-1/4"
2-1/8"
2-3/4"
2-3/4"
2-3/4"
2-1/8"
3-3/8"
3-3/8"
3-3/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/8"
1-1/2"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-1/8"
2-1/4"
-
240
240
260
260
385
385
935
935
935
935
1690
1690
1690
1690
2160
2160
2160
2160
240
240
240
240
240
260
385
385
385
385
240
385
240
240
285
285
340
340
490
490
490
490
240
240
240
240
240
285
340
340
340
340
240
340
190
190
225
225
250
250
700
700
700
700
190
190
190
190
190
225
250
250
250
250
190
250
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
50
50
25
25
25
10
-
075352061528
075352061535
075352061566
075352061573
075352061603
075352061641
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"
1-5/8"
1-5/8"
2-1/8"
2-1/4"
2-1/4"
2-3/4"
-
385
385
935
935
935
1690
340
340
490
490
490
-
250
250
700
700
700
-
Sleeve Anchor
304 Stainless Steel
FOR
USE
WITH
PRESSURE
Item #
C-Pak
371909
371910
371911
371912
371913
371914
DWO
TREATED
LUMBER
Size
3/8 x 1-7/8"
3/8 x 3"
1/2 x 2-1/4"
1/2 x 3"
1/2" x 4"
5/8 x 4-1/4"
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
18
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Power-Bolt® Heavy Duty Sleeve Anchor
Item #
DWO
Steel/Zinc
Mini Box
370832
370833
370834
370835
370836
370837
370838
370839
370840
370841
370842
370843
370844
370845
370846
370847
370848
370849
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
20
20
20
20
20
20
10
10
10
10
5
5
5
5
5
5
5
5
-
008236767117
008236767131
008236767155
008236767179
008236767193
008236767216
008236767230
008236767254
008236767278
008236767292
008236767315
008236767339
008236767353
008236767377
008236767391
008236767414
008236767438
008236767452
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
1-1/4"
1-1/4"
2"
2"
2"
2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3"
3"
3"
3"
-
395
425
1145
1215
1215
1500
1630
2260
2260
2425
1925
1925
2490
2490
2375
2375
3085
3775
220
220
290
290
290
290
500
500
500
500
-
250
250
400
400
400
400
620
620
620
620
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1/4 x 2-1/4"
1/4 x 3-1/4"
3/8 x 2-1/4"
3/8 x 2-3/4"
3/8 x 3"
3/8 x 3-3/4"
3/8 x 5"
1/2 x 2-3/4"
1/2 x 3-3/4"
1/2 x 4-1/2"
1/2 x 5-1/2"
1/2 x 7"
5/8 x 5"
5/8 x 6"
3/4 x 5-1/2"
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
50
50
25
25
25
25
25
25
25
25
10
10
10
10
10
008236429725
008236429749
008236429763
008236429787
008236429800
008236429824
008236429848
008236429862
008236429886
008236429909
008236429923
008236429947
008236429961
008236429985
008236430004
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
3-3/8"
-
405
515
760
940
940
940
1295
1390
1700
1700
1700
1795
2705
2975
3655
-
-
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 3-1/4"
3/8 x 2-1/4"
3/8 x 2-3/4"
3/8 x 3"
3/8 x 3-3/4"
3/8 x 5"
1/2 x 2-3/4"
1/2 x 3-3/4"
1/2 x 4-1/2"
50
40
30
25
25
25
25
10
12
12
10
-
008236561562
008236433326
008236433340
008236433364
008236433388
008236433401
008236433425
008236561586
008236433449
008236433463
008236433487
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1-1/8"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
-
360
405
515
760
940
940
940
1295
1390
1700
1700
-
-
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 3-1/4"
3/8 x 2-1/4"
3/8 x 2-3/4"
3/8 x 3"
3/8 x 3-3/4"
3/8 x 5"
1/2 x 2-3/4"
100
100
100
50
50
50
50
50
25
-
008236680300
008236680324
008236680348
008236680362
008236680386
008236680409
008236680423
008236680447
008236680461
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1-1/8"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
-
360
405
515
760
940
940
940
1295
1390
-
continued
1/4 x 1-3/4"
1/4 x 3"
3/8 x 2-1/4"
3/8 x 3"
3/8 x 3-1/2"
3/8 x 4"
1/2 x 2-3/4"
1/2 x 3-3/4"
1/2 x 4-3/4"
1/2 x 5-3/4"
5/8 x 3"
5/8 x 4"
5/8 x 5"
5/8 x 6"
3/4 x 3-1/4"
3/4 x 4-1/4"
3/4 x 5-1/4"
3/4 x 7-1/4"
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
Hex Head
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Power-Stud+® SD1 Anchor
Item #
Bag
370923
370925
370927
370929
370931
370933
370935
370937
370939
370941
370943
370945
370949
370951
370957
Mini Box
370990
370980
370981
370982
370983
370984
370985
370986
370987
370988
370989
C-Pak
371920
371922
371924
371926
371928
371930
371932
371934
371936
DWO
Steel/Zinc
Size
SOLID WALL ANCHORS
Pieces
per
Pak
Size
19
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Power-Stud+® SD1 Anchor, continued
Size
C-Pak, continued
371938
1/2 x 3-3/4"
371940
1/2 x 4-1/2"
371942
1/2 x 5-1/2"
371944
1/2 x 7"
371945
1/2 x 8-1/2"
371946
5/8 x 3-1/2"
371947
5/8 x 4-1/2"
371948
5/8 x 5"
371950
5/8 x 6"
371952
5/8 x 7"
371954
5/8 x 8-1/2"
371955
3/4 x 4-1/4"
371956
3/4 x 4-3/4"
371958
3/4 x 5-1/2"
371959
3/4 x 6-1/4"
371960
3/4 x 7"
371962
3/4 x 8-1/2"
371964
3/4 x 10"
371965
3/4 x 12"
371966
7/8 x 6"
371968
7/8 x 8"
371970
7/8 x 10"
371972
1 x 6"
371974
1 x 9"
371976
1 x 12"
371978
1-1/4 x 9"
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
-
008236680485
008236680508
008236680522
008236680560
008236684353
008236680584
008236680812
008236680836
008236680850
008236680874
008236687330
008236680898
008236680911
008236680935
008236680959
008236680973
008236680997
008236681017
008236681031
008236681055
008236681079
008236681093
008236681116
008236681130
008236681154
008236681178
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
7/8"
7/8"
7/8"
1"
1"
1"
1"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-3/8"
3-7/8"
3-7/8"
3-7/8"
4-1/2"
4-1/2"
4-1/2"
5-1/2"
-
1700
1700
1700
1795
1795
2075
2705
2705
2975
2975
3040
2500
2500
3655
3765
3765
3765
4275
4275
3905
4970
5110
3455
6370
6760
8850
-
-
Power-Stud® Wedge Anchor
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Mechanical Galvanized (conforms to ASTM B695, Class 65)
FOR
USE
WITH
PRESSURE
TREATED
LUMBER
Item #
C-Pak
372425
372431
372434
372436
372440
372445
372452
372455
372460
DWO
SOLID WALL ANCHORS
Item #
DWO
Steel/Zinc
Size
1/2 x 2-3/4"
1/2 x 4-1/2"
1/2 x 5-1/2"
1/2 x 7"
5/8 x 3-1/2"
5/8 x 6"
3/4 x 4-3/4"
3/4 x 5-1/2"
3/4 x 8-1/2"
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
25
25
25
25
10
10
10
10
10
-
008236897470
008236897494
008236897517
075352644356
008236897531
008236897555
008236897579
008236897593
075352077482
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
3/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
3-3/8"
3-3/8"
2-3/8"
-
1390
1700
1700
1795
2075
2975
2500
3655
3765
-
-
20
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Power-Stud® Wedge Anchor
304 Stainless Steel
FOR
USE
WITH
PRESSURE
Item #
DWO
TREATED
LUMBER
C-Pak
372303
372305
372309
372312
372315
372321
372325
372328
372331
372334
372336
372340
372343
372346
372349
372355
372358
372361
Size
1/4 x 2-1/4"
1/4 x 3-1/4"
3/8 x 2-1/4"
3/8 x 2-3/4"
3/8 x 3"
3/8 x 5"
1/2 x 2-3/4"
1/2 x 3-3/4"
1/2 x 4-1/2"
1/2 x 5-1/2"
1/2 x 7"
5/8 x 3-1/2"
5/8 x 5"
5/8 x 6"
5/8 x 7"
3/4 x 4-3/4"
3/4 x 5-1/2"
3/4 x 7"
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
50
50
50
50
25
25
25
25
25
10
10
10
10
10
10
10
-
075352672014
075352672151
075352658520
075352671659
075352671734
075352671970
008236897258
008236897272
008236897296
008236897319
075352073262
008236897333
008236897357
008236897371
008236897395
008236897418
008236897432
008236897456
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
1-1/8"
1-1/8"
1-5/8"
1-5/8"
1-5/8"
1-5/8"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
2-3/4"
3-3/8"
3-3/8"
3-3/8"
-
405
515
760
940
940
1295
1390
1700
1700
1700
1795
2075
2705
2975
2975
2500
3655
3765
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
100
100
100
100
50
50
50
25
25
25
20
20
15
20
10
10
10
10
10
10
10
10
10
-
008236726213
008236726237
008236726251
008236726275
008236726299
008236726312
008236726336
008236726350
008236726374
008236726398
008236726411
008236726435
008236726459
008236726473
008236726497
008236726510
008236726534
008236726558
008236726572
008236726596
008236726619
008236726633
008236726657
1/4"WB
1/4"WB
1/4"WB
1/4"WB
3/8"WB
3/8"WB
3/8"WB
3/8"WB
1/2"WB
1/2"WB
1/2"WB
1/2"WB
1/2"WB
1/2"WB
5/8"WB
5/8"WB
5/8"WB
5/8"WB
3/4"WB
3/4"WB
3/4"WB
3/4"WB
3/4"WB
1"
1"
1"
1"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2"
2"
2"
2"
2"
2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3"
3"
-
335
335
535
550
630
980
1330
1480
875
985
1300
1950
2120
2270
1180
1845
3190
4270
1250
1620
3035
3755
4475
-
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Wedge-Bolt®+ Anchors
Use with Wedge-Bit for Best Performance
C-Pak
372150
372152
372154
372156
372158
372160
372162
372164
372166
372168
372170
372172
372174
372176
372178
372180
372182
372184
372186
372188
372190
372192
372194
Size
1/4 x 1-1/4"
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 3"
3/8 x 1-3/4"
3/8 x 2-1/2"
3/8 x 3"
3/8 x 4"
1/2 x 2"
1/2 x 2-1/2"
1/2 x 3"
1/2 x 4"
1/2 x 5"
1/2 x 6"
5/8 x 3"
5/8 x 4"
5/8 x 5"
5/8 x 6"
3/4 x 3"
3/4 x 4"
3/4 x 5"
3/4 x 6"
3/4 x 8"
Brick
-
SOLID WALL ANCHORS
Item #
DWO
Steel/Zinc
21
!
G
IN
D E D
IL D VE
U O
B C RO
PP
A
New
Wedge-Bolt®+ Anchors
Mechanical Galvanized (conforms to ASTM B695, class 55)
FOR
USE
WITH
PRESSURE
Item #
DWO
TREATED
LUMBER
C-Pak
372126
372128
372130
372132
372134
372136
372138
372140
Size
3/8 x 4"
1/2 x 4"
1/2 x 5"
1/2 x 6"
1/2 x 8"
5/8 x 5"
5/8 x 6"
5/8 x 8"
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
25
20
15
20
10
10
10
10
-
008236991116
008236991130
008236991154
008236991178
008236991093
008236991192
008236991215
008236991239
3/8"WB
1/2"WB
1/2"WB
1/2"WB
1/2"WB
5/8"WB
5/8"WB
5/8"WB
1-1/2"
2"
2"
2"
2"
2-1/2"
2-1/2"
2-1/2"
-
1480
1950
2120
2270
2270
3190
4270
4270
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
50
50
20
20
10
-
075352077055
075352077062
008236897197
008236897210
008236897234
3/8"WB
3/8"WB
1/2"WB
1/2"WB
5/8"WB
1-1/2"
1-1/2"
2"
2"
2-1/2"
-
980
1330
1300
1950
1845
-
-
G
IN
D E D
IL D VE
U O
B C RO
PP
A
Wedge-Bolt® Anchors
410 Stainless Steel
FOR
USE
WITH
PRESSURE
C-Pak
371915
371916
371906
371907
371908
Size
▲
▲
▲
▲
▲
3/8 x 2-1/2"
3/8 x 3"
1/2 x 3"
1/2 x 4"
5/8 x 4"
Wedge-Bit
Straight Shank
SDS-Plus
Item #
Pouch
372200
372201
372202
372203
372204
372205
372206
372207
372208
372209
372210
372211
372212
372213
DWO
SOLID WALL ANCHORS
Item #
DWO
TREATED
LUMBER
Size
Straight Shank 1/4 x 4" (2-3/4" usable)
Straight Shank 1/4 x 6" (4" usable)
SDS-Plus 1/4 x 4" (2" usable)
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
1
1
1
1
1
1
1
1
1
1
1
1
1
1
-
008236726671
008236726688
008236726695
008236726701
008236726718
008236726725
008236726732
075352013121
075352013145
075352013169
075352013206
075352013220
075352013268
075352013305
-
-
-
-
-
-
22
Item #
DWO
Strike Anchor
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
2000 psi
Concrete
C-90
Block
Brick
1/4 x 1-3/4"
1/4 x 2-3/8"
5/16 x 2-3/4"
3/8 x 2-3/8"
3/8 x 3-1/2"
1/2 x 3-1/2"
1/2 x 4-3/4"
5/8 x 4"
5/8 x 6"
3/4 x 5"
1
1
1
1
1
1
1
1
1
1
50
50
50
25
25
25
25
10
10
10
008236430745
008236430769
008236430783
008236430806
008236430820
008236430844
008236430868
008236430882
008236430905
008236430929
1/4"
1/4"
5/16"
3/8"
3/8"
1/2"
1/2"
5/8"
5/8"
3/4"
1-1/8"
1-1/8"
1-1/2"
1-3/4"
1-3/4"
2-1/2"
2-1/2"
3"
3"
3-1/2"
-
95
95
125
240
240
400
400
745
745
1015
-
-
1/4 x 1-3/4"
1/4 x 2-3/8"
5/16 x 2"
5/16 x 2-3/4"
3/8 x 2-3/8"
3/8 x 3-1/2"
3/8x4-3/4"
1/2x2-3/4"
1/2 x 3-1/2"
1/2 x 4-3/4"
1/2 x 6"
5/8 x 4"
5/8 x 4-3/4"
5/8 x 6"
3/4 x 5"
3/4 x 6"
3/4 x 7-1/2"
50
50
50
50
50
50
25
25
25
25
20
10
10
10
10
10
10
-
008236109412
008236109429
008236557817
008236109436
008236109443
008236109450
008236557831
008236557855
008236109467
008236109474
008236557879
008236109481
008236557893
008236109498
008236109504
008236557916
008236557930
1/4"
1/4"
5/16"
5/16"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
3/4"
3/4"
3/4"
1-1/8"
1-1/8"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
1-3/4"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3-1/2"
3-1/2"
3-1/2"
-
95
95
125
125
240
240
240
400
400
400
400
745
745
745
1015
1015
1015
-
-
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
100
100
100
50
50
50
50
50
25
-
075352071015
075352071039
075352071077
075352071237
072520024210
075352071299
075352071459
075352071510
075352071534
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1-3/8"
1-3/8"
1-3/8"
1-5/8"
1-5/8"
1-5/8"
1-7/8"
1-7/8"
1-7/8"
-
485
485
485
900
900
900
1250
1250
1250
-
-
Item #
C-Pak
370579
370582
370585
370588
370591
370594
370597
370600
370603
DWO
Stud Bolt Anchor
Size
1/4 x 1-3/4"
1/4 x 2-1/4"
1/4 x 3-1/4"
3/8 x 2-1/4"
3/8 x 3"
3/8 x 3-3/4"
1/2 x 2-3/4"
1/2 x 4-1/4"
1/2 x 5-1/4"
SOLID WALL ANCHORS
Bag
375651
375654
375657
375660
375663
375666
375669
375672
375675
375678
C-Pak
375650
375653
375681
375656
375659
375662
375682
375683
375665
375668
375684
375671
375685
375674
375677
375679
375680
Pieces
per
Pak
Size
23
Anchor Bolt
Item #
DWO
Plain
3/8 x 6"
3/8 x 8"
3/8 x 10"
3/8 x 12"
1/2 x 6"
1/2 x 8"
1/2 x 10"
1/2 x 12"
1/2 x 14"
1/2 x 16"
1/2 x 18"
1/2 x 20"
5/8 x 8"
5/8 x 10"
5/8 x 12"
5/8 x 14"
5/8 x 15"
5/8 x 16"
5/8 x 18"
5/8 x 20"
3/4 x 10"
3/4 x 12"
3/4 x 15"
3/4 x 16"
Pieces
per
Pak
Paks
per
Master
UPC
100
100
100
50
50
50
50
50
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
-
008236088700
008236088717
008236088724
008236088731
008236088748
008236088755
008236088762
008236088779
008236088786
008236088793
008236088809
008236088816
008236088823
008236088830
008236088847
008236088854
008236088861
008236088878
008236088885
008236088892
008236088908
008236088915
008236088922
008236088939
Pieces
per
Pak
Paks
per
Master
UPC
100
100
50
50
50
50
10
10
10
-
008236780062
008236780086
008236780109
008236780123
008236780147
008236780161
008236942798
008236942392
008236942415
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
Anchor Bolt
Hot Dipped Galvanized (Conforms to ASTM A153)
FOR
USE
WITH
PRESSURE
TREATED
LUMBER
Item #
C-Pak
260285
260286
260287
260288
260289
260290
260291
260292
260293
DWO
SOLID WALL ANCHORS
C-Pak
260305
260306
260309
260312
260324
260327
260330
260333
260336
260339
260342
260345
260375
260378
260381
260383
260384
260387
260390
260393
260394
260396
260397
260398
Size
Size
3/8 x 6"
3/8 x 8"
1/2 x 6"
1/2 x 8"
1/2 x 10"
1/2 x 12"
5/8 x 8"
5/8 x 10"
5/8 x 12"
C-90
Block
Brick
24
FOR
USE
WITH
PRESSURE
TREATED
LUMBER
Item #
DWO
Plastic ACQ Sleeve
Size
ACQ Plastic Sleeve
shown placed on the
Power-Stud™ Wedge Anchor
Pieces
per
Pak
Paks
per
Master
UPC
Drill
Size
Minimum
Embedment
1/2"
Drywall
4000 psi
Concrete
C-90
Block
Brick
40
-
008236851663
5/8"
1-1/2"
-
-
-
-
C-Pak
370460
1/2" - insert into treated sill plate
Plastic ACQ Sleeve
Protects Anchor Bolts and Mechanical
Anchors from Treated Lumber
Treated Wood
Foundation
SOLID WALL ANCHORS
25
Approvals and Listings
International Code Council, Evaluation Service (ICC-ES)
Mechanical & Adhesive Anchors
• ESR-2818
• ESR-2966
• ESR-2526
• ESR-1678
• ESR-2989
• ESR-3068
• ESR-3066
Power-Stud+SD1ExpansionAnchorsforCrackedandUncrackedConcrete
Power-Stud+SD1ExpansionAnchorsinMasonryUnits(CMU)
Wedge-Bolt+ScrewAnchorinCrackedandUncrackedConcrete
Wedge-Bolt+ScrewAnchorinConcreteMasonryUnits(CMU)
Vertigo+RodHangerScrewAnchorinCrackedandUncrackedConcrete
Tapper+ScrewAnchorinUncrackedConcrete
T308+EpoxyAdhesiveAnchorSysteminUncrackedConcrete
Powder Actuated Fasteners
• ESR-1995
8mmHeadSpiralCSIPin(.157StraightShank)and10mmHeadDrivePin(.177StraightShank)PowerDrivenFasteners
• ER-5330–ESR2024 PowersPower-DrivenFasteners
City of Los Angeles (COLA) Building Code Research Reports
Mechanical Anchors
• LARR-25787
• LARR-25864
• LARR-25808
Power-Stud+SD1AnchorinCrackedandUncrackedConcrete
Power-Stud+SD1AnchorinConcreteMasonryUnits(CMU)
Wedge-Bolt+AnchorinCrackedandUncrackedConcrete
Powder Actuated Fasteners
• LARR-25304
PowderActuatedFasteners
Miami-Dade Building Code Compliance
Product Control – Notices of Acceptance (NOA)
• NOA10-0505.05
• NOA09-0714.04
• NOA05-0701.10
Tapper+ScrewAnchorforConcrete&Masonry
TapperScrewAnchorforMasonry
Wedge-BoltScrewAnchor
Underwriters Laboratories (UL)
APPROVALS & LISTINGS
For use with Pipe Hanger Equipment and Fire Protection Systems – Product Listings
• FileNo.EX1289
• FileNo.SA32979
Power-Bolt,Power-Stud,Power-Stud+SD1,Lok-Bolt
PowderActuatedTools
FM Global (Factory Mutual) – FM Approvals Division
• FileNo.J.I.1K8A3.AH
• FileNo.J.I.OK4A9.AH
• FileNo.J.I.OH5A4.AH
• FileNo.J.I.3002070
• FileNo.J.I.3015153
• FileNo.3033795
Power-Bolt
Power-Stud,Set-Bolt
Power-Stud
PowderActuatedThreadedStuds
Vertigo
Power-Stud+SD1
Federal Product Descriptions
General Services Administration (GSA) – Commercial Item Descriptions (CID’s)
• CIDA-A-1923A,Type4 Power-Stud+SD1
• CIDA-A-55614,Type2 Set-Bolt
Walldog,™ Pop-Toggle,™ Strap-Toggle,™ Spike,® Tapper,® Drive,® Power-Bolt,® Power-Stud,® Wedge-Bolt,™
Set-Bolt,™ Lok-Bolt,™ and Vertigo® are trademarks of Powers Fasteners, Brewster, New York.
26
Terms and Conditions of Sale
GENERAL
The terms and conditions of this document shall constitute the entire
Agreement for the purchase and sale of the products to Purchaser.
Acceptance made expressly conditional upon Purchaser’s assent
to these terms, which may differ from, vary or be in addition to the
terms in Purchaser’s purchase order or request for quotation. Any
varying, differing or additional terms and conditions contained in
the Purchaser’s purchase order or request for quotation shall not be
binding upon Hillman.
DISCOUNT TERMS
A 1% cash discount is allowed for invoices paid within 10 days
of invoice date or net payment due within 30 days. Any new
orders or back-orders will be held without shipment if there are
unpaid invoices in excess of 45 days, or if authorized credit limit
is exceeded.
PRICES
Prices are subject to change without advance notice. All items will
be invoiced at the catalog price less the applicable discounts. Prices
apply for full box quantities only. Partial boxes will be invoiced at
full retail price. Only certain products will be available for partial box
sales.
QUOTATIONS
Written price quotations remain in effect for thirty days from time of
quotation unless otherwise stated in writing.
BACK ORDERS
All orders will be accepted on a ship and cancel basis, unless
otherwise requested. Displays, assortments and special items WILL
be back-ordered unless otherwise stated.
FREIGHT
The routing of ALL shipments shall be entirely within the discretion
ofHillman.Specialshippingrequests–airfreight–busshipments–
specialdispatch–dropshipments,etc.–willbesentfreightcollect
and will be F.O.B. shipping point. Long length rods, angles, flats,
etc. will be shipped F.O.B. shipping point on shipments of 300 lbs.
or less. Orders less than $250.00 will be charged freight. Handling
charges will be as follows: Orders less than $250.00 are subject
to a $1.00 handling charge. Orders over $250.00 are subject to a
$2.00 handling charge. As economic circumstances dictate, a fuel
surcharge may be assessed in addition to freight and handling on all
orders. Freight terms are subject to change without prior notice.
SPECIAL ORDERS AND ORDERS
FOR NON-STOCKING PRODUCT
Special orders are non-cancelable, non-returnable and must be
ordered via a purchase order from the Purchaser. All special orders
will be shipped in accordance with quoted lead times and at industry
standard ±10% of the order quantity. Purchaser is liable for the entire
order quantity.
CLAIMS AND DAMAGES
All damages and shortages must be reported to us within five
days after receipt of merchandise. If goods are damaged in transit
or shortages received, notification should be made directly with
carriers. Before reporting shortages, please check to make sure
packing slip indicates shorted items have been shown as being
shipped.
RETURNS
Materials returned for credit or exchange will be accepted only under
the following conditions:
1) Materials must be current, cataloged, and must have been
purchased within the 6 months immediately preceding the
return of such materials. Specials and discontinued products,
defined at the sole discretion of Hillman, cannot be returned.
2) Prior to returning any product to Hillman, approval and a return
authorization number must be obtained. Freight carrier and
routing must also be approved by Hillman.
3) Materials received by Hillman without prior approval and
authorization number will be returned, freight collect, to the
Purchaser. R.A. # must be printed on outer carton.
LIMITATIONS OF LIABILITY
All goods returned to and accepted by Hillman as defective or
incorrect shall be replaced or credited in full. No claim made
hereunder by the Purchaser, whether as to goods delivered or for
non-delivery, shall be greater than the purchase price of the goods
in respect of which such claim is made. PURCHASER WAIVES ANY
CLAIM AGAINST HILLMAN FOR DIRECT, INDIRECT, SPECIAL,
EXEMPLARY, PUNITIVE, COMPENSATORY, CONSEQUENTIAL, OR
INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST
PROFITS AND BUSINESS INTERRUPTION, WHICH MAY RESULT
FROM YOUR PURCHASE AND/OR USE OF THE PRODUCTS.
HILLMANMAKESNOWARRANTYOFFITNESSFORA
PARTICULAR PURPOSE OR MERCHANTABILITY AND NO OTHER
WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED,
EXCEPT AS SPECIFICALLY SET FORTH HEREIN. Purchaser agrees
to indemnify and hold Hillman harmless from all claims, demands,
and costs, including reasonable attorneys’ fees, made by third
parties against Hillman relating to Purchaser’s use of the products,
and to pay any costs and expenses incurred by Hillman to enforce
Purchaser’s obligations, including, without limitation, the costs of
collection for any unpaid amounts owed to Hillman by Purchaser.
COSTS
Any and all costs resulting from, or incurred in connection with the
collection of any monies due from the Purchaser, including court
costs, appellate court costs, and Hillman’s reasonable attorney’s
fees will be the responsibility of the Purchaser.
ELECTRONIC DATA INTERCHANGE
If Hillman and Purchaser have mutually agreed to use an Electronic
Data Interchange (EDI) system to facilitate purchase and sale
transactions, Purchaser agrees: that it will not contest (i) any contract
of sale resulting from an EDI transaction under the provisions of any
law relating to whether agreements must be in writing or signed by
the party to be bound thereby; or (ii) the admissibility of copies of
EDI records under the business records exception to the hearsay
rule, the best evidence rule or any other similar rule, on the basis
that such records were not originated or maintained in documentary
form. Hillman and Purchaser will negotiate and agree on technical
standards and methods to use in making EDI purchases, and will use
proper security procedures to protect EDI records from improper
access. The business records maintained by Hillman regarding EDI
purchases made by Purchaser shall be controlling.
TERMS & CONIDITIONS OF SALE
MINIMUM ORDER
Minimum order is $25, based on Hillman current Net Purchaser
Prices. Orders of less than $25 will be processed with a $25 Net
Invoice.
4) All returns should be shipped freight prepaid. If Hillman
determines the product to be defective, Purchaser’s account
will be credited, including the appropriate freight charges.
5) Returning materials for credit or exchange are subject to a
minimum restocking charge of 20%, plus any freight expenses
originally incurred by Hillman in the delivery of said materials.
The restock charge may be calculated at the sole discretion of
Hillman. All returns must be in saleable condition.
TAXES
All applicable federal, state or local sales, use, occupational or
excise taxes are the responsibility of the Purchaser and shall be in
addition to the price or prices stated. Hillman shall have the right to
invoice separately any such tax as may be imposed at a later time.
Applicable tax exemption certificates must accompany any order to
which the same applies.
CONFIDENTIALITY
Purchaser will hold any information concerning Hillman’s business,
or any other information about Hillman, in absolute and strict
confidence.
APPLICABLE LAW
This Agreement shall be governed by and construed in accordance
with the laws of the State of Ohio, without regard to its choice of
law provisions, and the sole jurisdiction and venue for any litigation
arising with regard to this Agreement shall be an appropriate federal
or state court located in Hamilton County, Ohio.
SEVERABILITY
If any provision of this Agreement is held to be invalid, illegal, or
unenforceable in any respect, the validity, legality, or enforceability
of the remaining provisions contained herein shall not in any way be
affected or impaired thereby.
27
28
NOTES
Flexible
Merchandising
g
n
i
s
i
d
n
a
h
c
r
e
MOPTIONS
Information Point Displays
"Anchor Guide"
Pamphlet
4' DIY “Reality” Information Point Display
•Includesallhollowwallanchorsandlightdutyanchorsforconcrete,brickandblock.
4' PRO “Reality” Information Point Display
•Worksinconjunctionwiththe4'DIYrealitydisplayfor8'programs.
•Includesmediumandheavydutystructuralanchorsforconcrete,brick and block.
4' Angled Information Point Sign
•This“nocharge”optioncanworkinanysizedisplay4'orlarger.
•ThisdisplayprovidesinformationonmostanchorsintheAnchorCenterprogram.
Bolt Bar™ Labels
Plastic Anchor
2
For Drywall, Plaster, Brick, Block, Concrete
Wallboard Anchor
Self Drilling Anchor
Two–Way Header Sign
3
For Drywall
#2
PHILLIPS
1
For Drywall, Plaster, Brick, Block, Concrete
#2
PHILLIPS
Professional Anchors
Professional Anchors
Southeast Distribution Center
Jacksonville, Florida
Southwest Distribution Center
Dallas, Texas
Western Distribution Center
Bakersfield, California 1-800-800-4906
Corporate Office &
Midwest/Northeast Distribution Center
Cincinnati, Ohio 1-800-800-4900
Distribution & Manufacturing
Tempe, Arizona 1-800-876-7766
Goodlettsville, Tennessee
The Hillman Group Canada, LTD
Toronto, Canada 1-866-631-5508
Mexico Distribution Center
Monterrey, Mexico
All Points Division
Pompano Beach, Florida 1-800-226-5555
10590 Hamilton Ave.
Cincinnati, OH 45231
Phone: 1 (800) 800-4900
Fax: (513) 851-4997
www.hillmangroup.com
04/13 Form#990014
0
08236 89481
3

The Anchor Center - categories On The Hillman Group

Transcription

Similar documents

Key Accessories - categories On The Hillman Group

elko junction - Meridian Pacific

powers fasteners branch information

Heavy-Duty Sleeve Anchor

NA GLE APAR TMENTS CORP