hypro sprayer pumps

Transcription

hypro sprayer pumps

78
SALES / CUSTOMER SERVICE: 800-831-0027 • TEMPE, AZ OFFICE: 877-974-7166 • WWW.FIMCOINDUSTRIES.COM
HYPRO SPRAYER PUMPS
IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps
for liquid fertilizers, soil fumigants and insecticides containing phosphates.
Repair Kits Include Super Rollers, Viton Seals & O-Ring Gasket.
SERIES 6500 (6 ROLLER) SPRAYER PUMP
FITS (540 & 1000 RPM PTO SHAFTS)
Super Roller Equipped
Along with the 7560, the Series 6500 is one
of the most widely used pumps on farms
today. It’s an economical way to handle: water, herbicides, insecticides, emulsions,
aromatic solvents, fertilizer, and wettable
powder.
9.76 GPM at 540 RPM - 18.2 GPM at 1000
RPM - Max Pressure 300 PSI - Max Speed
1200 RPM - Max Output 21.8 GPM
XL Series also ideal for
pumping ™Round Up
Repair Kit......7771795.... 3430-0380...... $55.81
SERIES 7560 (8 ROLLER) SPRAYER PUMP
(540 & 1000 RPM PTO SPEEDS)
Super Roller Equipped The Series 7560
offers a variety of choices in materials for
rollers, shaft seals and pump housing. The choice reflects your pumping needs: water, herbicides, insecticides, emulsions,
aromatic solvents, fertilizer and wettable
powder. Heavy duty construction with
15/16” diameter steel shaft.
12 GPM at 540 RPM - 22.5 GPM at
1000 RPM. Max Pressure 300 PSI Max Speed 1200 RPM
pumping ™Round Up
Description
LIst
Price
5271706
5271712
5272446
6500C-A
Cast Iron Pump Less Coupler
$201.00
6500N-A
Ni-Resist Pump Less Coupler
$457.00
*6500C-AR Cast Iron Pump Reverse Rotation$210.00
5273024
6500XL-A
5168226 3420-0023
5005047 1320-0022
5057145 1321-0012
5057031 1321-0006
5005061 1320-0053
5057033 1321-0008
*For Use With Gasoline
Fimco
Mfg.
Code No. Part No.
Silver Series Pump Less Coupler $643.00
Base Kit (Fits All 6500 Pumps)
540 RPM Standard Coupler
540 or 1000 RPM Quick Coupler
540 RPM Quick Coupler
Engine
$30.75
$22.00
$43.00
$43.75
$33.25
$53.25
Description
LIst
Price
5271077 7560C-A
$264.00
5271081 7560N-A
$522.00
5271509 *7560C-AR-01 Cast Iron Pump Reverse Rotation$264.23
5273025 7560XL-A
5168050 3420-0003
5005054 1320-0033
5057146 1321-0013
5057032 1321-0007
5005058 1320-0038
5057034 1321-0009
*For Use With Gasoline
Base Kit (Fits All 7560 Pumps)
540 or 1000 RPM Quick Coupler
Engine
$48.75
$32.25
$45.50
$47.50
$42.50
$52.00
Repair Kit......7771794.... 3430-0381...... $79.72
SERIES 7700 (7 ROLLER) PUMP
(MAX. 800 RPM)
Plenty of pump for both spraying and
agitation — 13 G.P.M. at 50 P.S.I. at 540
rpm PTO speed. Designed for wettable
powder herbicides and
insecticides. Avoids clogging and
helps assure a proper and uniform mix.
Max. Output to 22.1 GPM - Pressure
to 200 PSI. Max. Speed 800 RPM Temperature to 140° F.
pumping ™Round Up
Fimco
Mfg.
Code No. Part No.
Fimco
Mfg.
Code No. Part No.
Description
List
Price
5271085
5271089
7700C-A
7700N-A
5273026
7700XL-A
5005054
5057032
1320-0033
1321-0007
$269.00
$522.00
$32.25
$47.50
Repair Kit......7771799.... 3430-0384...... $74.77
SPECIFICATIONS FOR ROLLER PUMPS
MAX
PSI
SHAFT MAX
DIAMETER
RPM HEIGHT
STYLE
1500
1700
4001
4101
6500
7560
7700
150
200
150
150
300
300
200
1000
1000
1800
2600
1200
1000
800
62
45
9
7
21.8
22
22.1
5”
3-3/8”
1-3/4”
1-3/4”
3-5/32”
3-3/8”
3-1/2”
PORTS
SIZE
15/16” Solid 1-1/2” (F)NPT
15/16” Solid 1” (F)NPT
5/8” Solid 3/4” (F)NPT
15/16” Solid 3/4” (F)NPT
15/16” Solid 3/4” (F)NPT
ROLLER STANDARD
MATERIAL
SEAL
LENGTH
Super
Super
Super
Super
Super
Super
Super
Roller
Roller
Roller
Roller
Roller
Roller
Roller
Buna-N
Viton
Viton
Viton
Viton
Viton
Viton
7-11/16”
7-23/32”
5-11/32”
5-11/32”
5-11/32”
6-13/16”
6-7/8”
WIDTH
HEIGHT
8-3/4”
8-1/4”
4-5/8”
4-5/8”
6”
6-5/8”
6-5/8”
8-1/8”
6-7/32”
3”
3”
5-1/2”
5-15/16”
6”
PUMPS ::
MAX
Series GPM
79
HYPRO SPRAYER PUMPS
SERIES 1700 (5 ROLLER) PUMPS
The 1700 Series handles a variety of
liquids: water, herbicides, insecticides,
emulsions, aromatic solvents, fertilizer and
wettable powder. Use where moderate
flow and pressure is desirable.
Output to 45 GPM - Pressure to
200 PSI - Speed to 1000 RPM Temperature to140° F
Repair Kit......5168816.... 3430-0383...... $75.50
SERIES 1500 (6 ROLLER) PUMPS
Series 1500 adapts to 1-3/8” or 1-3/4”
1000 RPM PTO shafts as well as 540
RPM. It can be used with a large
variety of chemicals.
Output to 62 GPM - Pressure to
150 PSI - Speed to 1000 RPM Temperature to 140° F
Repair Kit......5168817.... 3430-0386...... $74.00
SERIES 4001/4101 (4 ROLLER)
SMALL, DURABLE, LOW-COST PUMPS
WITH MANY INDUSTRIAL USES
Use Series 4001/4101 as a “pressure” pump
for spraying, atomizing or blending insecticides,
herbicides, fumigants, etc., or as a transfer pump
for water, brine, oils, solvents, and many chemicals,
or as a circulating pump for lubricants, coolants,
and rinsing solutions.
Series 4001, for electric motor drive: Output to 9 GPM - Pressure to 150
PSI- Speed to 1800 RPM - Temperature
to 140° F. Series 4101, for gas engine
drive: Output to 7 GPM - Pressure
to 150 PSI - Speed to 2600 RPM Temperature to 140° F
pumping ™Round Up
Repair Kit......7771796.... 3430-0390...... $36.30
POWER TAKE
OFF COUPLERS
1
:: PUMPS
2
3
Item Fimco Code No. Mfg’s Part No.
1
5057145
1321-0012
1321-0006
1
5057031
1
5057146
1321-0013
1
5057032
1321-0007
1
5057033
1321-0008
1
5057034
1321-0009
2
1323-0076
2
1323-0077
3
5005047
1320-0022
3
5005054
1320-0033
3
5005061
1320-0053
1320-0038
3
5005058
3
5005245
1320-0080
5005175
1320-0016
5005240
1320-0015
5026011
3250-0004
Fimco
Mfg.
Code No. Part No.
Description
5271710
5271709
1700C-A
1700N-A
$415.00
$860.00
5273027
1700XL-A Silver Series Pump Less Coupler
$1163.00
5005054
5057032
5005058
5057034
5005245
1320-0033
1321-0007
1320-0038
1321-0009
1320-0080
1000 RPM 1-3/4” Coupler
Fimco
Mfg.
Code No. Part No.
Description
5271539
5271451
1502C-A
1502N-A
5273028
5005054
5057032
5005058
5057034
5005245
1502XL-A Silver Series Pump Less Coupler
1320-0033
1321-0007
1320-0038
1321-0009
1320-0080
Fimco
Mfg.
Code No. Part No.
1000 RPM 1-3/4” Coupler
Description
List
Price
$35.25
$47.50
$42.50
$52.00
$70.50
List
Price
$639.00
$1057.00
$1458.00
$32.25
$47.50
$42.50
$52.00
$70.50
List
Price
(The Following Pumps Operate up to 1800 RPM)
Cast Iron Pump 5/8” Solid Shaft
5271759 4001C-A
Ni-Resis Pump 5/8” Solid Shaft
5271760 4001N-A
$199.00
$345.00
5273029 4001XL-A
$511.00
Silver Series Pump 5/8” Solid Shaft
(The Following Pumps Operate up to 2600 RPM)
Cast Iron Pump 5/8” Solid Shaft
5271757 4101C-A
5271758 4101N-A
Ni-Resist Pump 5/8” Solid Shaft
$186.00
$333.00
5273030 4101XL-A
$498.00
Silver Series Pump 5/8” Solid Shaft
$36.00
50051751320-00165/8” Sleeve Coupler Direct To Engine Mount
$36.25
51682583420-0024Base Kit For Electric - 3-1/2” Shaft Centerline
51682593420-0025Base Kit For Gas Engine - 4-3/16” Shaft Centerline $39.50
Description
List Price
Hypro Quick Coupler-Fits 5/8” Shaft (540 or 1000 RPM PTO)
$43.00
Hypro Quick Coupler-Fits 5/8” Shaft (540 RPM PTO)
$43.75
Hypro Quick Coupler-Fits 15/16” Shaft (540 or 1000 RPM PTO)
$45.50
$47.50
$53.25
$52.00
Forged Steel Coupler-Fits 15/16” Shaft (540/1000 RPM PTO)
$55.50
Forged Steel Coupler-Fits 5/8” Shaft (540/1000 RPM PTO)
$55.50
Standard Coupler-Fits 5/8” Shaft (540 RPM PTO) 6 Spline
$22.00
Standard Coupler-Fits 15/16” Shaft (540 RPM PTO)
$32.25
Standard Coupler-Fits 5/8” Shaft (1000 RPM PTO) 21 Spline
$33.25
Standard Coupler-Fits 15/16” Shaft (1000 RPM PTO)
$42.50
Standard Coupler-Fits 15/16” Shaft (1-3/4” 1000 RPM PTO)
$70.50
5/8” x 5/8” Adapter Kit
$36.00
3/4” x 5/8” Adapter Kit
$37.25
Quick Coupler. Balls Only
$1.05
80
CENTRIFUGAL PUMPS
PTOC
PTO DRIVEN
CENTRIFUGAL PUMPS
Fimco
Mfg.
Code No.
Model No.
FMC
FMC-HYD-204
Description
Wt.
List
Price
5271573PTOC-600-6SP
Cast iron 1-1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for direct mounting
on 1-3/8 600RPM PTO shaft, 0-70 PSI. Equipped with 6 spline PTO drive shaft. Viton mechanical
seal. Fully guarded for operator safety.
45
$1,125.00
5271574
Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for direct mounting
on 1-3/8” 600RPM PTO shaft 0-70 PSI. Equipped with 6 spline quick coupler PTO drive shaft. Viton mechanical seal. Fully guarded for operator safety.
46
$1,140.00
PTOC-600-QC
5271940PTOC-600-B
Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt. 1” Diameter stub shaft
and integral mounting base 600 RPM Tumblerod drive shaft. 0-70 PSI. Equipped with Viton
mechanical seal. Fully guarded for operator safety.
42
$1,145.00
5271543PTOC-1000-21SP
Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for direct
mounting on 1 3/8”1000 RPM PTO shaft. 0-70 PSI. Equipped with 21 spline split PTO drive shaft
and split ring locking collar. Viton mechanical seals. Fully guarded for operator safety.
43
$1,150.00
5271822PTOC-1000-20SP
Cast iron 1 1/4” x 1” straight centrifugal with pulleys and 10 groove belt arranged for mounting on
1 3/4” 1000 RPM PTO shaft. 0-70 PSI. Equipped with split PTO drive shaft and split ring locking
collar, Viton mechanical seals. Fully guarded for operator safety.
45
$1,190.00
5273035PTOC-150-600-6SP
0-100 PSI cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on
1-3/8”, 600 RPM PTO shaft. Viton mechanical seal. Fully guarded for operator safety.
51
$1,275.00
5273036
0-100 PSI cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting on
1-3/8”, 600 RPM PTO Shaft; equipped with Quick Coupler. Viton mechanical seal. Fully guarded for
operator safety
51
$1,290.00
0-100 PSI, cast iron straight centrifugal with pulleys and 10 groove belt assembled for direct
mounting on 1-3/8” 1000 RPM PTO Shaft. Equipped with 21 spline PTO shaft and locking collar.
Viton Mechanical seal. Fully guarded for operator safety.
48
$1,300.00
50
$1,340.00
PTOC-150-600-6SPQC
5273037PTOC-150-1000-21SP
0-100 PSI, cast iron straight centrifugal with pulleys and 10 groove belt assembled for mounting
5273038PTOC-150-1000-20SPon 1-3/4” 1000 RPM PTO shaft. Equipped with 20 spline PTO shaft and locking collar. Viton
mechanical seal. Fully guarded for operator safety.
CENTRIFUGAL PUMPS - TRACTOR HYDRAULIC SYSTEM DRIVEN
Cast iron 1 1/4” x 1” frame mounted straight centrifugal pump for tractor
hydraulic system applications. Assembled with hydraulic motor equipped with
internal check valve to prevent reverse rotation and resulting seal damage. Also equipped with integral needle valve to control input of fluid on open
center tractor hydraulic systems and a restrictor orifice to control input of fluid
on closed center systems is included with Model FMC-HYD-204. (Models
FMC-HYD-210 and FMC-HYD-310 are not equipped with restrictor orifice).To
match pump model with tractor hydraulic system capacity, refer to chart below. Models FMC-HYD-204 and FMC-HYD-210 produce 0-100 PSI at maximum
4600 RPM and 60 GPM at open discharge. Model FMC-HYD-310 produces
0-65 PSI at maximum 3950 RPM and 60 GPM at open discharge. For open
center systems which require sprayer pump pressures of from 60 to 100 PSI,
pump model FMC-HYD-210 should be selected where the tractor system has a
minimum of 8 GPM at 500 PSI available at the remote ports.
The New Model No. FMC-150-HYD-206 has 1-1/2” x 1-1/4” ports. Maximum
pressure 120 PSI at 5100 RPM at open discharge. 7 GPM hydraulic motor
can be used on pressure compensating Closed Center Systems (John Deere
Type), Load Sensing Closed Center Systems (Case-IH type), and Open Center
Systems Rated 7-16 GPM. Equipped with restrictor Orifice.
TRACTOR HYDRAULIC SYSTEM REMOTE OUTLET CAPACITY (GPM)
F
imco
Mfg.
Code No. Part No.
5271132
5271733
5271734
5273039
Pressure Compensating
Load Sensing
CLOSED CENTER CLOSED CENTER
(John Deere Type)
(Case-IH Type)
FMC HYD 204
FMC HYD 210
FMC HYD 310
FMC-150-HYD-206
++ Indicates which Pumps may be used with which Hydraulic Systems
OPEN CENTER
Wt.
List
Price
++
++ 4-13 GPM
++
++ 8-17 GPM
++ 18-24 GPM
++
++
++ 7-16 GPM
26
27
33
31
$1,025.00
$1,025.00
$1,085.00
$1,055.00
FRAME MOUNTED CENTRIFUGAL PUMPS - COUNTER-CLOCKWISE ROTATION
FMC-MIA
Cast iron 1 1/4” x 1” frame mounted straight centrifugal pump for belt drive application. 0-100
PSI at maximum 4600 RPM, 60 GPM at open discharge. Equipped with Viton mechanical seal. Mounting frame machined for idler arm.
18
$493.00
5168201
FMK
Mounting kit for John Deere 1000 RPM front PTO shaft. For use with Ace counterclockwise
rotation Models FMC and FMCH, when adapted to John Deere tractor Models 2510, 3010, 4010,
2520, 3020, 4020, and 4520. Includes mounting bracket, belts and splined pulley.
11
$401.50
5271819
FMC-MAG
Cast iron 1 1/4” x 1” frame mounted counterclockwise rotation straight centrifugal pump
assembled with 12 volt DC belt driven magnetic clutch. 0-100 PSI at max. 4600 RPM, 60 GPM
at open discharge. Equipped with Viton mechanical seal.
22
$1,005.00
PUMPS ::
5271128
81
PARTS LIST FOR ACE CENTRIFUGAL PUMPS
TRACTOR PTO DRIVEN
PUMP REPAIR KITS
Includes Belt, VITON Seal, Gaskets & “O” Ring
5168204 (RK-PTOC-600)
for Models PTOC-600-6SP, PTOC-600-QC and PTOC-600-B
5168205 (RK-PTOC-1000)
for Models PTOC-1000-21SP and PTOC-1000-175-20-SP
Fimco
Ref. Code No.
:: PUMPS
1
2
3
4
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
17
19
19
19
19
20
21
21
21
22
23
24
25
26
27
28
29
30
31
32
33
38
39
40
41
42
43
44
45
46
47
48
49
50
52
53
54
Mfg.
Part No.
5072114
BAC-4
5019087
BAC-5
5118118
BAC-6-SS
5072129
BAC-7B
5072115BAC-7V
5072130
40160
5118136
BAC-10-6-SP
5128001
BAC-10-6SP-QC
5118137
BAC-10-21SP
5118146
BAC-10-175-20SP
5118124
BAC-10-S
5055021
BAC-11
5055022
BAC-11-175
5117178
BAC-11-1
5084021
BAC-12
5023041
BAC-13
5070011
BAC-14-MIA
5271422
BAC-15
5271425
BAC15-B
5159048
BAC-26-Valox
5159029
BAC-26-CI
5032020
BAC-28-8
5032019
BAC-28-8-M
5032022
BAC-28-10
5032025
BAC-28-10-M
5105022
BAC-29-10-1.5
5105023
BAC-30-10
5105024
BAC-30-10-M
5105028
BAC-30-175
5031148
BAC-31-1
5110084
BAC-32
5127073
BAC-32-S
5110085
BAC-33
5110086
BAC-34
5110087
BAC-35
5110088
BAC-36
5031060
BAC-37
BAC-38-1
5127155
5034099
40950
5117099
BAC-40
5006099
40960
5006101
BAC-46
5034084
BAC-47
5110089
BAC-49
5089022BAC-50
5089023BAC-51
BAC-52
5049015
5102038
BAC-53
5108028BAC-54
5031066
BAC-55
5271428
BAC-55-A
BAC-57
5117100
5012009
BAC-58
5034192
41250
5006035
BAC-63
5117101
41300
5108032
BAC-81-QC
5019144
BAC-82-QC
5026022
BAC-83-QC
BGKB
5076003
$102.00
$102.00
Description
Gasket, 4 Hole
Idler Torsion Spring
5/8” Shaft, L. H. Thread, Stainless (Optional)
Buna N Seal (Optional)
VitonSeal
“O” Ring For BAC-6 Shaft
1 3/8” 6 Spline PTO (For PTOC-600-10-6SP)
1 3/8” 6 Spline PTO (For PTOC-10-QC)
1 3/8” 21 Spline PTO (For PTOC-1000-10-21SP)
1 3/4” 20 Spline PTO (For PTOC-1000-175-20SP
1” Stub Drive Shaft (For PTOC-600-10B)
Locking Collar (For BAC-10-21SP Shaft)
Locking Collar (For BAC-10-175 Shaft)
Set Screw (For BAC-11-175 Locking Collar)
1 1/4” x 1” Volute
Idler Arm
Mounting Frame, Mach. For Idler Arm
Bearing Housing (For PTO Models)
Bearing Housing w/base (For PTOC-600-10B)
Impeller Valox, L. H. Thread
Impeller Cast Iron, L. H. Thread (Optional)
Belt, 8 Groove (PTOC-600) (Obsolete)
Belt, 8 Groove (PTOC-1000) (Obsolete)
Belt, 10 Groove (PTOC-600-10, & 10B)
Belt, 10 Groove (PTOC-1000-10)
Pully, 10 Groove
Pully, 10 Groove (PTOC-600-10, & 10B)
Pully, 10 Groove (PTOC-1000-10)
Pully, 10 Groove (For PTOC-1000-175-20SP)
Ball Bearing, BAC-10 Drive Shaft (792 & up)
External Snap Ring
Spacer
Internal Snap Ring
Internal Snap Ring
External Snap Ring
External Snap Ring
Sealed Ball Bearing
Bearing Spacer, For BAC-10 Drive Shaft (792 & up)
Hex Head Cap Screw
Slotted Set Screw
Jam Nut
5/8” Spacer
Cap Screw
Retainer Ring
Key
Key
1/4” Cold Shut Chain Anchor
1/8” NPT Pipe Plug
Slinger
Idler Bearing And Roller Assembly
Idler Arm Assembly
Set Screw
Zerk Fitting
Cap Screw
Self Locking Nut
Set Screw
Ball Retainer
Spring For Quick Coupler
Ball For Quick Coupler
Belt Guard Kit (PTOC-Pumps)
Reg.
List
Price
1
$3.00
1
$20.00
1
$95.00
1
$46.00
1 $45.00
1
$1.00
1
$240.00
1
$245.00
1
$290.00
1
$330.00
1
$230.00
1
$105.00
1
$130.00
1
$1.00
1
$195.00
1
$72.00
1
$225.00
1
$175.00
1
$235.00
1
$65.00
1
$150.00
1
$55.00
1
$55.00
1
$50.00
1
$50.00
1
$70.00
1
$190.00
1
$185.00
1
$200.00
2
$46.00
2
$.50
1
$6.00
2
$2.00
2
$3.00
1
$1.00
1
$2.00
2
$19.00
1
$24.00
4
$.50
3
$.75
3
$.50
1
$15.00
1
$7.00
1
$.50
1 $1.25
1 $5.00
1
$4.00
3
$.50
1 $1.50
1
$50.00
1
$144.50
2
$.60
1
$2.50
1
$2.00
1
$.57
2
$.75
1
$29.00
1
$11.00
3
$1.50
1
$114.20
PUMP MODELS
•
•
•
•
•
PTOC-600-B
PTOC-600-SP
PTOC-600-6-SPQC
PTOC-1000-21-SP
PTOC-1000-175-20-SP
82
CENTRIFUGAL PUMPS
SERIES 9300 HYDRAULIC MOTOR DRIVEN CENTRIFUGAL PUMPS
Model
Number
Max.
GPM
9303C-HM1C
(5271842)
9303C-HM2C
(5271843)
9303C-HM3C
(5271969)
9303C-HM4C
(5271970)
9306C-HM1C
9306C-HM3C
9306C-HM5C
3430-0589
114
97
125
115
207
214
212
Max.
PSI
130
95
85
93
130
135
140
Description
List
Price
( 10 gpm) hydraulic motor/cast iron pump for open/closed
center systems, ports (NPT): 1-1/2” Inlet, 1-1/4” Outlet
(5 gpm) hydraulic motor/cast iron pump for closed
center systems, ports (NPT): 1-1/2” inlet, 1-1/4” outlet
(20 gpm) hydraulic motor/cast iron pump, Large open
center systems, ports (NPT): 1-1/2” inlet, 1-1/4” outlet.
(7 gpm) hydraulic motor/cast iron pump, closed/open
center systems, ports (NPT): 1-1/2” inlet, 1-1/4” outlet
(10 gpm) hydraulic motor/cast iron pump, closed/ open
center systems, ports, (NPT): 2” inlet, 1-1/2 outlet.
(20 gpm) hydraulic motor/cast iron pump, large open
center systems, ports (NPT): 2” inlet, 1-1/2” Outlet
(17 gpm) hydraulic motor/cast iron pump, closed/open
center systems, ports (NPT): 2” inlet, 1-1/2” outlet.
Silicon carbide seal is available by special order
Use suffix letter -B
Estimated
Shpg. Wt.
$1,066.00
26 lbs.
$1,066.00
26 lbs.
$1,133.00
26 lbs.
$1,066.00
26 lbs.
$1,248.00
33 lbs.
$1,316.00
33 lbs.
$1,248.00
33 lbs.
$192.00
SERIES 9000 GEAR DRIVEN CENTRIFUGAL PUMPS
A good pump for handling wettable
powder slurries, the 9000 is widely
used for high capacity field spraying
and liquid transfer. Exclusive, smooth
running planetary gear drive. Compact
in size—fits under the PTO shield.
Construction: Cast iron housing. Gears
safely enclosed in factory-lubricated
case (500 hour lubrication interval). Viton shaft seal standard; Use with 540
or 1000 rpm PTO speeds.
Output to 117 GPM - Pressure to 80 PSI. Speed to
1000 RPM - Temperature to 140° F. PORT SIZES:
1-1/2” INLET 1-1/4” OUTLET. WEIGHT: 45 LBS
Fimco
Mfg.
Code No. Part No.
Description
5271095
5271096
5271841
5272401
1-3/8” 540 RPM PTO
1-3/8” 1000 RPM PTO
1-3/4” 1000 RPM PTO
1” Solid Shaft 1000 RPM
9006C-O
9008C-O
9028C-O
9018C-O
List
Price
$1,157.00
$1,200.00
$1,392.00
$1,186.00
SERIES 9400 CAST IRON BELT DRIVEN MODELS WITH
12-GROOVE BELT & IDLER PULLEY
Model
Number
Max.
GPM
Max.
PSI
Max.
RPM
Shaft
List
Price
Estimated
Shpg. Wt.
1-1/4” Inlet, 1” Outlet
$1,133.00
45 lbs.
$1,151.00
45 lbs.
$1,149.00
42 lbs.
$1,199.00
42 lbs.
1-1/2” Inlet, 1”-1/4” Outlet
$1,279.00
45 lbs.
1-1/2” Inlet, 1-1/4” Outlet
$1,298.00
45 lbs.
1/2” Inlet, 1-1/4” Outlet
$1,298.00
$1,298.00
45 lbs.
42 lbs.
$1,347.00
42 lbs.
$1,298.00
42 lbs.
PUMPS ::
9402C-540
76
95
600
1-3/8” Hollow, (5273660)
6-Spline
9402C-540Q
76
95
600
1-3/8”, 6 Spline
(5273661)
Quick Coupler
9402C-1000
76
95
1000
1-3/8” Hollow,
(5273662)
21-Spline
9402C-1000L 76
95
1000
1-3/4” Hollow,
(5273663)
20-Spline
9403C-540
140
104
600
1-3/8” Hollow
6-Spline
9403C-540Q 140
104
600
1-3/8”, 6-Spline
Quick Coupler
9403C-540S
140
104
600
1” Solid
9403C-1000
140
104
1000
1-3/8” Hollow
21-Spline
9403C-1000L 140
104
1000
1-3/4” Hollow
20-Spline
9403C-1000S 140
104
1000
1” Solid
NPT Ports
83
CENTRIFUGAL PUMPS
9600C HYPRO TURBINE PUMP & PTO ADAPTERS
Model
Number
Max.
GPM
Max.
PSI
Max.
RPM
Description
List
Price
Shpg.
Wt.
5005245
5005247
1200
1-3/4” Forged Steel PTO Adapter
$70.50
1 lb.
1200
1-3/8” Forged Steel PTO Adapter
$46.75
1 lb.
5168754
Torque Arm Kit for 9600C
$34.25
2 lbs.
3430-0540
Torque Arm Kit for Roller Pumps
$54.00
2 lbs.
SERIES 9200 PEDESTAL MODELS
Model
Number
Max.
GPM
List
Price
Shpg.
Wt.
9202C
105
170
6000
Cast Iron - 5/8” Solid Shaft w/Viton Shaft Seal
(5271967)
Ports (NPT): 1-1/4” Inlet, 1” Outlet
170
6000
Cast-Iron - 5/8” Solid Shaft w/Viton Shaft Seal
9203C
140
Ports (NPT): 1-1/2” Inlet, 1-1/4” Outlet
(5271968)
9203C-R
140
170
6000
Cast Iron -with 5/8” solid shaft, counter clockwise (5272579)
rotation viton seal, and 1-1/2” x 1-1/4” Ports
$479.00
18 lbs.
$485.00
19 lbs
$497.00
17 lbs.
9206C
(5275540)
$636.00
23 lbs.
225
Max.
PSI
80
Max.
RPM
4200
Description
Cast iron - with 5/8” solid shaft and Viton Seal, Ports (NPT): 2” Inlet, 1-1/2 Outlet
POLYPROPYLENE CENTRIFUGAL PUMPS (GEAR DRIVEN PTO)
Model
Number
Max.
GPM
Max.
PSI
Max.
RPM
Description
List
Price
Shpg.
Wt.
9006P-O
97
83
540
(5272451)
Gears are safely enclosed in the factory lubricated case.
It is available in a gear drive for 540 RPM for coupling to
standard PTO.
$1,213.00
37 lbs.
86
67
1000
9008P-O
(5272452)
Gears are safely enclosed in the factory lubricated case.
It is available in a gear drive for 1000 RPM for coupling
to standard PTO.
$1,213.00
37 lbs.
POLYPROPYLENE CENTRIFUGAL PUMPS (PEDESTAL MOUNTED)
Model
Number
Max.
GPM
Max.
PSI
Max.
RPM
9203P-S
(5272453)
100
80
4200
Description
The pedestal mounted centrifugal pump is designed for
direct drive with an electric motor or belt and pulley drive
with an electric motor or gas engine. It has a 7/8” keyed
316 Stainless Steel Shaft.
List
Price
Shpg.
Wt.
$593.00
13 lbs.
POLYPROPYLENE CENTRIFUGAL PUMPS (HYDRAULIC MOTOR DRIVEN)
:: PUMPS
Model
Number
Max.
GPM
Max.
PSI
9303P-HM1C
110
130
(5273217)
9303P-HM3C
110
93
(5272454)
82
85
9303P-HM4C
(5272455)
Max.
RPM
Description
List
Price
Open /
The hydraulic motor features a fixed displacement interna $1,099.00
Closed
gear design for smooth operation. A double lip Teflon shaft
Open
seal provides excellent reliability even with hydraulic oil
$1,166.00
back pressure. The hardened stainless steel motor/ pump
shaft is supported by two needle bearings and a ball
Open /
bearing for dependable operation through years of use.
$1,099.00
Closed
Shpg.
Wt.
20 lbs.
21 lbs.
19 lbs.
84
HYPRO DIAPHRAGM PUMPS
PISTON-DIAPHRAGM PUMPS are ideal for spraying agricultural spray for pest
and weed control and liquid fertilizer application. The moving parts are stainless
steel hermetically sealed in 100% oil bath and never come in contact with
spray liquid. The only moving part of the pump in contact with the spray is the
diaphragm which is resistant to most chemicals pumped.
Diaphragms and valves can be replaced on the farm without special tools and
are easily accessible from the outside of the pumps. Pumps will run dry and
with abrasives, they are positive displacement type pumps and self priming. They are light, and have surge chamber attached. Hose connectors are built
on the pumps.
LOW PRESSURE DIAPHRAGM PUMPS
Model
Number
Max.
PSI
Max.
RPM
290
290
550
3600
9910-D115
30.1
9910-D115GR34 30.1
290
290
9910-D135
34.8
9910-D160
9910-D250
9910-D70
9910-D70GR
Max.
GPM
List
Price
Shpg.
Wt.
2 - Diaphragm Pump 9910-D70GR
$1,170.00
$1,947.00
22 lbs.
31 lbs.
550
3600
3 - Diaphragm Pump 9910-D115GR34
$1,756.00
$2,354.00
35 lbs.
44 lbs.
290
550
3 - Diaphragm Pump $1,894.00
38 lbs.
42.5
290
550
66 lbs.
66
290
550
92 lbs.
List
Price
Shpg.
Wt.
19
19
Description
MEDIUM PRESSURE DIAPHRAGM PUMPS
Model
Number
Max. Max.
GPM PSI
Max.
RPM
9910-D252
9910-D252GRGI
9910-D252GRGI58
9910-D252GRGIAP
6.0
6.0
6.0
-
650
3600
3600
-
Description
$843.00
$1,167.00
$1,167.00
$1,167.00
12
14
14
14
9910-D30
9.5
580
550
2 - Diaphragm Pump 9910-D30AP-A
$1,054.00
$1,125.00
23 lbs.
24 lbs.
9910-D30GRGI
9.5
580
3600
2 - Diaphragm Pump 9910-D30-B-GRGI
9910-D303
7.9
580
550
3-Diaphragm Pump
9910-D303GRGI
3600
3-Diaphragm Pump
$1,891.00
$1,891.00
$1,002.00
$1,908.00
33
32
23
23
9910-D403
9910-D403GRGI
$1,825.00
$1,985.00
23 lbs.
23 lbs.
$1,493.00
$1,564.00
$1,493.00
$2,533.00
$2,387.00
34
37
28
41
41
10.6
290
290
290
-
580
550
3600
2
2
2
2
-
Diaphragm
Diaphragm
Diaphragm
Diaphragm
Pump
(Semi-Hydraulic) Pump
(Semi-Hydraulic) Pump
(Seim-Hydraulic) Pump
3-Diaphragm Pump
3-Diaphragm Pump
9910-D50
14.0
580
550
2- Diaphragm Pump 9910-D50AP-A
15.0
580
550
3 - Diaphragm Pump
9910-D503
15.0
580
3600
3 - Diaphragm Pump 9910-D503GRGI
300
3600
3 - Diaphragm Pump
9910-D503GRGI34 15.0
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
HIGH PRESSURE DIAPHRAGM PUMPS
Model
Number
Max.
GPM
Max.
PSI
Max.
RPM
Description
List
Price
Shpg.
Wt.
$1,859.00
$3,183.00
48 lbs.
60 lbs.
$2,106.00
$3,429.00
54 lbs.
65 lbs.
9910-D1265
33.2
725
550
9910-D1516
39.8
725
550
5 - Diaphragm Pump
$3,193.00
66 lbs.
6 - Diaphragm Pump
$3,581.00
78 lbs.
9910-DBS160
4 - Diaphragm Pump
$5,200.00
143 lbs
41
725
550
PUMPS ::
9910-D813
21.4
725
550
21.4
725
3600
3- Diaphragm Pump
9910-D1064
28
725
550
28
725
3600
4 - DiaphragmPump 85
CONTROL UNITS & SHAFT KITS
CONTROL UNITS
Model
Number
Max. Max.
GPM PSI
Description
List
Price
9910-KIT1994
3.5
290
Control unit for Model 9910-D12GRGI. Includes relief valve
and two 3/8” hose barb outlets.
6
290
Control Unit For Mounting On 9910-D252 Model Pumps.
9910-KIT1990
Includes Relief Valve And Pressure/Bypass
Selector. 5/8” HB Bypass Port And 3/8” HB Outlet.
9910-GS40GI
21
580
Control Unit For Mounting On 9910-D30 & 9910-D50
Model Pumps. Includes High Pressure Relief Valve And
(3) 1/2” HB Outlets With Individual Shut-Offs.
15
550
Remote Mounting Kit For 9910-GS40GI or 9910-GR40 .
9910-KIT1741
Control Unit. Includes Mounting Bracket, Bolts & Hose Barb
11
580
Control Unit For 9910-D303 & D403 Model Pumps Include 9910-GR40
Adjustable High Pressure Relief Valves, Complete Bypass
Lever, 2 1/2” Gauge, Outlet Barbs & 5/8” Bypass Barb
9910-RM40
24
580
Control Unit For 9910-D503 Model Pumps. Includes High
Pressure Relief Valve, And Two 1/2” HB Outlets With
Individual Shut-Offs. Unit Can Be Either Direct or Remote Mounted.
9910-GS50GI
48
725
Remote Control Unit For Mounting On 9910-D813, D1064,
D1265, D1516 & D1554 Model Pumps. Includes High Pressure
Relief Valve & Three 1/2” HB Outlets With Individual Shut-Offs.
9910-KIT1742
48
725
Remote Mounting Kit For 9910-GS50GI Control Unit.
Includes mounting bracket, bolts & Hose Barb.
9910-BMH50
41
725
Control Unit For DBS110, 140 & 160. 51
725
Control Unit For 9910-DBS200.
9910-GH50
Shpg.
Wt.
$147.00
1 lb.
$135.00
1 lb.
$296.00
3.5 lbs.
$64.25
1 Lb.
$364.00
2 lbs.
$364.00
3.5 lbs.
$577.00
8.5 lbs.
$112.00 1.25 lbs.
$582.00 6.5 lbs.
$518.00 8.25 lbs.
GEAR REDUCTION KITS
Model No.
Description
List Price
Shpg Wt.
*9910-KIT1640
For Model 9910-D30, D303 & D403 Pumps
6:1 Gear Box for standard 5HP engine w/3/4” shaft
$689.00
6.5 lbs.
9910-KIT1642
FOR MODEL 9910-D50, D503, D813, D1064 & D1265 PUMPS
6:I Gear Box For Standard 8-18 HP Gas Engine w/1” Shaft
$861.00
8.5 lbs.
*This kit can also be used with 9910-D50, D503 & D813, providing that pumps are operated at lower pressures, that do not
exceed 5 HP gas engine capability.
1-3/8-6B FEMALE PTO SHAFT KITS
Model No.
9910-KIT1704
9910-KIT1708
9910-KIT2204
Description
For Model 9910-D50, D30, D303 & D403 Pumps
For Model 9910-D70 And Model 9910-D115 Pumps
For Model 9910-D503
List Price
$290.00
$264.00
$262.00
Shpg Wt.
7 lbs.
5.25 lbs.
7 lbs.
*Kits include female PTO coupler and retaining clamp, torque arm and mounting bracket, chains, and necessary hardware.
1-3/8-6B MALE PTO SHAFT KITS
Model No.
9910-KIT1702
9910-KIT1706
9910-KIT1710
9910-KIT2200
9910-KIT2201
Description
For
For
For
For
For
Model 9910-D30 Pumps
Model 9910-D50
Model 9910-D70 And Model 9910-D115 Pumps
Model 9910-D503, D303 & D403
Models 9910-D813, D1064, & D1265 Pumps
List Price
$174.00
$216.00
$306.00
$156.00
$156.00
Shpg Wt.
3
4.25
5.5
4.25
4.25
lbs.
lbs.
lbs.
lbs.
lbs.
*Kits include male PTO shaft adapter, mounting bracket, and necessary hardware
1” SOLID SHAFT KITS
:: PUMPS
Model No.
9910-KIT1703
9910-KIT1707
9910-KIT1711
9910-KIT2202
9910-KIT2203
Description
For
For
For
For
For
Model 9910-D30 Pumps
Model 9910-D50
Model 9910-D70 And Model 9910-D115 Pumps
Model 9910-D503, D303 & D403
Models 9910-D813, D1064, & D1265 Pumps
*Kits include solid shaft adapter, mounting bracket, and necessary hardware.
List Price
$174.00
$216.00
$305.00
$156.00
$156.00
Shpg Wt.
2.5
3.75
5
3.75
3.75
lbs.
lbs.
lbs.
lbs.
lbs.
86
BANJO SELF-PRIMING PUMPS
Mfg.
Fimco
Part#
Part#
Description
Gas Engine Driven Self-Priming Cast Iron Pumps
150PI3
200PI-3
200PI6PRO
200PIH-5
300PIH-8
300PIH-11
Centrifugal SelfPriming Pump
5274087
5274090
5274092
List
Price
1-1/2” Briggs 3 H.P., Rewind, 100 GPM
2” Briggs 3 H.P., Rewind, 160 GPM
2” Briggs 6.5 H.P.,Rewind, 160 GPM
2” Honda 5.5 H.P., 5.5 H.P., Rewind, 160 GPM
3” Honda 8 H.P., Rewind, 200 GPM
3” Honda 11 H.P., Electric, 250 GPM
Hydraulic
Driven Cast Iron Pumps w/Hydraulic Motor
150PIHY
200PIHY
300PIHY
Hydraulic Driven
Cast Iron Pump
5274094
$1,264.77
$1,264.77
$1,417.72
$2,305.25
$4,693.94
$5,075.56
$2,394.22
$2,394.22
$4,861.28
1-1/2” Hydraulic Driven Cast Pump
2” Hydraulic Driven Cast Pump
3” Hydraulic Driven Cast Pump
Cast Iron Pump Only (For use w/gas engines-includes bolt package & support Z rails)
150POI
5274098
1-1/2” Cast Pump Only
200POI
5274099
2” Cast Pump Only
5274100
3” Cast Pump Only
300POI
POI-Pump only is shipped complete and ready for attachment to a gasoline engine
Cast Iron Pump Pedestal Mounted (for use with electric motors)
150PBI
5274101
1-1/2” Cast Pump w/Pedestal
Cast Iron
200PBI
2” Cast Pump w/Pedestal
300PBI
5274103
3” Cast Pump w/Pedestal
444PBI
4” Cast Iron Pump/Bearing Pedestal With 1” Shaft
433PBI
4” Cast Iron Pump w/4” Inlet & 3” Outlet/Bearing Pedestal w/1” Shaft
333PBI
3” Cast Iron Pump/Bearing Pedestal With 1” Shaft
PBI-Pedestal pump is easily adaptable to electric power
Replacement Engines Only
E3
GX160K1QX2
Cast Iron Pump
Pedestal Mounted
5274104
5152058
$732.40
$732.40
$1,682.43
$1,000.07
$1,000.07
$1,960.40
$3,412.66
$3,412.66
$3,412.66
$707.17
Briggs 3 H.P. Engine Only
Honda 5.5 H.P. Engine Only
Call for Price
BANJO POLY SELF-PRIMING PUMPS
Mfg.
Fimco
Part#
Part#
Description
Poly Centrifugal Pumps (Gas Engine Pump w/EPDM Rubber Parts)
150P3
200P-3
200P6PRO
200PH-5
300PH-6
5274108
5274109
5274111
5274113
1-1/2” Briggs 3 H.P., 100 GPM
2” Briggs 3 H.P., 100 GPM
2” Briggs 6.5 H.P., 160 GPM
2” Honda 5.5 H.P., 160 GPM
3” Honda 6.5 H.P., 300 GPM
List
Price
$910.11
$910.11
$1,058.77
$1,846.02
$2,342.54
Poly Bearing Pedestal Pump (To Adapt To Electric Motor)
150PB
200PB
300PB
5274115
5272832
5274117
1-1/2” Pump w/Pedestal 3/4” Shaft
2” Pump w/Pedestal 3/4” Shaft
3” Pump w/Pedestal 3/4” Shaft
Poly Pumps w/Viton Rubber Parts
150P-3-V
5274118
1-1/2” Briggs 3 H.P., 100 GPM
200P-3-V
200P6-PROV
200PH5-V
5274119
5274121
150PB-V
200PB-V
5274122
5274123
2” Honda 5.5 H.P., 160 GPM
Poly
Bearing Pedestal Pump W/Viton Parts
1-1/2” w/Bearing Pedestal Shaft
2” w/Bearing Pedestal Shaft
$633.83
$633.83
$1,016.69
Poly Self-Priming Pump
$1,191.98
$1,191.98
$1,371.49
$2,165.20
$911.52
$911.52
150PO-V
200PO-V
5274124
5274125
1-1/2” Pump Only w/Viton Parts
2” Pump Only w/Viton Parts
$673.13
$673.13
Poly Pedestal Pump
PUMPS ::
Poly Pump Only w/Viton Parts
87
BANJO WET SEAL & STAINLESS STEEL PUMPS
The new Banjo Wet Seal Pump is equipped with a double seal arrangement where
the seal is contained in an ethylene glycol (antifreeze) reservoir. This enables the
pump to run dry for short periods of time without damaging the seal. Extended
services of the seal substantially adds lift to the pump and engine.
Mfg.
Fimco
Part#
Part#
Description
Wet Seal Self-Priming 316 Stainless Steel Centrifugal Pumps
200PH5-SSW
300PH-11SSW
5274127
5274128
List
Price
$5,878.78
$12,127.01
2” Honda 5.5 H.P., 160 GPM
3” Honda 11 H.P., 345 GPM
Wet Seal 316 Stainless Steel Pump Only
200PO-SSW
300PO-SSW
5274129
$3,724.46
$7,716.69
2” Stainless Steel Pump Only
3” Stainless Steel Pump Only
Wet Seal 316 Stainless Steel Pedestal Pump
200PB-SSW
300PB-SSW
5274131
5274132
$3,973.18
$7,753.60
2” SS Pump w/Pedestal
3” SS Pump w/Pedestal
WET SEAL PUMP
FEATURES:
• Viton double seal contained
in ethylene glycol reservoir
• Sight tube indicator
Wet Seal Self-Priming Cast Iron Centrifugal Pumps
200PI-6W
200PIH-5W
300PIH-11W
5274133
5274136
$2,020.68
$2,949.56
$5,981.72
2” Honda 5.5 H.P., 160 GPM
Wet Seal Cast Iron Pump Only (For Use w/Gas engine)
200POI-W
300POI-W
5274139
$1,341.76
$2,928.91
2” Cast Iron Pump Only
3” Cast Iron Pump Only
Wet Seal Cast Iron Pedestal Pump Only (For Use w/Electric Motor)
201PBI-W
5274141
$1,580.62
2” Cast Iron Pump w/Pedestal
• Dynamic balanced impeller
• All stainless steel hardware
• Available in 316 stainless
steel or cast iron with
bearing pedestal, gas
engine, or pump only
STAINLESS STEEL PUMPS
All 316 Stainless Steel Wettable Internal Components:
• Impeller
• Wear Plate
• Sleeve
• Fasteners
Mfg.
Fimco
Part#
Part#
Description
Self-Priming 316 Stainless Steel Centrifugal Pumps
200P6PROSS
300PH13SS
300PH11-SS
5274143
-
5274145
List
Price
$4,313.40
$11619.34
$11,013.80
Hydraulic Driven 316 Stainless Steel Pumps
200PHYSS
300PHYSS
5274146
5274147
2” Hydraulic Driven SS Pump
3” Hydraulic Driven SS Pump
$5,290.00
$8,809.21
316 Stainless Steel Pump Only (For Use w/Gas Engine)
200PO-SS
300PO-SS
5274148
5274149
2” 316 Stainless Steel Pump Only
3” 316 Stainless Steel Pump Only
$3,022.04
$5,805.97
:: PUMPS
316 Stainless Steel Pedestal Pumps (For Use w/Electric Motor)
200PB-SS
300PB-SS
5274151
2” 316 Stainless Steel w/Pedestal
3” 316 Stainless Steel w/Pedestal
$3,156.84
$5,925.97

hypro sprayer pumps

Transcription

Similar documents

HYPRO SPRAYER PUMPS

teejet vari-spacing nozzles

Sprayer Book