Dolphin II - Nik Huber Guitars

Transcription

Dolphin II - Nik Huber Guitars
Do l p h i n
II
Finally a guitar that embodies the best
of all worlds: vintage and modern,
handcrafted and high-tech, appropriate
for any stage or showcase, and built
with only carefully selected materials
and close attention to the fine detail.
Nik Huber Guitars | Borsigstr. 13 | 63110 Rodgau /Germany | Fon +49 - (0) 61 06 - 77 21 66 | Fax +49 - (0) 61 06 - 77 21 67 | [email protected]
Do l p h i n
Top
Body Wood
Curly Maple
Mahogany
NECK
Neck Wood
Fretboard
Scale Length
Radius
Frets
Trussrod
Shape
Width at Nut Thickness: Mahogany, set neck
East Indian Rosewood
25,5“ (648mm)
Compound, 10“ - 14“ (255mm - 355mm)
22 Medium Jumbo, extra hard
(2,49mm wide - 1,19mm high), routed fretslots
Double Action (Single Rod, compressed)
Dolphin Std.
1,67“ (42,5mm)
0,88“ (22,5mm) at 1st Fret; 0,96“ (24,5mm) at 12th
FRET
Abalone Dots (7mm)
Ebony Veneer
Orca Logo (Black Pearl & Mother Of Pearl)
Black Tusq
Inlays
Headstock
Headstock Inlay
Nut
HARDWARE Bridge
Tuners
Hardware Colour
Trussrod Cover
Neck Pickup
Bridge Pickup
Electronics
Backplate
Setup
Adjustable Stoptail (Aluminum w/ Brass Studs)
Schaller M6 Mini w/ Ebony Buttons
Nickel
Ebony
Vin Humbucker w/ Nickel Cover (made by H. Häussel)
Vin+ Humbucker w/ Nickel Cover (made by H. Häussel)
1 Master Volume Control, 1 Master Tone Control
(Push/Push for Coil Tap), 3 Way Toggle Switch
Mahogany or Rosewood
010 - 046
COLOURS
Atlantic Blue, Hierbas Yellow, Tigereye, Charcoal, Ruby Red
CASE
Hardcase
OPTIONS Semihollow Body
Exceptional Curly Maple Top
Exceptional Quilted Maple Top
Custom Colour
Nitro Finish
Korina Body & Neck
Braz. Rosewood Neck
Curly Maple Neck
Braz. Rosewood Fingerboard
Maple Bound Fingerboard
Dolphin Inlays (not available in the USA)
Headstock Colour Match Body
Trem System/ Locking Tuner
Gold Hardware
5-Way Blade Switch
Middle Pickup
Woodbucker (wooden PU-Bobbins and -Rings)
Maple, Rosewood or Ebony PU-Rings
Ebony Fingerboard
Nik Huber Guitars | Borsigstr. 13 | 63110 Rodgau /Germany | Fon +49 - (0) 61 06 - 77 21 66 | Fax +49 - (0) 61 06 - 77 21 67 | [email protected]
Specifications and colours may vary.
BODY
II

Similar documents

Junior - Nik Huber Guitars

Junior - Nik Huber Guitars Junior Std. 1,67“ (42,5mm) 0,90“ (23mm) at 1st Fret, 0,998“ (25mm) at 12th Fret Abalone Dots (7mm) Ebony Veneer Polished Bone

More information

Krautster - Nik Huber Guitars

Krautster - Nik Huber Guitars 0,88“ (22,5mm) at 1st Fret; 0,96“ (24,5mm) at 12th Fret Abalone Dots (7mm) Painted black Bone Satin

More information