Big Square Balers

LB 1270 - LB 1290
Big Square Balers
Specialists in the Art of Baling
2
Leader in baling technology
Profitable operation
Service
The ability to produce top quality bales in
Bale quality and density are fundamental to
Vicon LB balers are designed to keep service
all crop conditions sets Vicon LB balers
the profitable operation of a square baler.
requirements to an absolute minimum.
apart from all others. Perfect shaped bales,
Unique Vicon innovations such as Power
In the event of a breakdown, an extensive
combined with huge output and outstanding
Density and Integral Rotor Technology
network of professionally trained dealers is
long durability, ensure that an LB baler will
make a real difference in field performance.
fully qualified to provide expert support.
be a profitable investment. Vicon has many
Vicon LB balers have the ability to pack the
years of experience in square baler
absolute maximum into each bale,
technology and this knowledge has been
increasing the potential for profitable
put to good use, to ensure ease of
operation by reducing the cost per ton of
operation over long working days while
crop baled, whether operating in silage, hay,
achieving consistently high daily outputs.
straw or energy crop.
Flexibel Solutions
The LB 1270 makes bales from 120 cm
width, has a bale height of 70 cm and can
make bales up to 300 cm.
With or without a 23 knife cutting device.
The LB 1290 makes bales from 120 cm
width, has an adjustable bale height of 80
or 90 cm and can make bales up to 300 cm.
With or without a 23 knife cutting device.
3
Intake
Excellent Intake Performance
4
Integral Rotor – a constant flow
Smooth crop flow
of crop for optimum throughput
Large diameter, height adjustable guide wheels
Vicon’s Integral Rotor Technology raises
with pneumatic tyres carry the spring balanced
intake performance to a new level. Large
pickup over every ground contour, resulting
diameter, heavy duty auger flights are
in the cleanest raking job. A crop baffle plate
incorporated directly onto the outer sections
above the pickup helps to even out the flow
of the rotor. Crop is positively handled by
of material, pre-compressing the crop in front
feeding tines arranged in a helix pattern,
of the rotor regardless of conditions.
maintaining an even feed, regardless of
For the most awkward swaths, the baffle
variations in swath condition. This means
plate can be equipped with a roller press to
the heaviest of swaths are force-fed through
guide it over the swath for even smoother
the intake system, resulting in higher forward
material flow.
speeds for outstanding productivity.
Heavy duty driveline with
camclutch protectioin
Omnicut
The ultimate in crop cutting
Next to the standard integral rotor Vicon
offers the OmniCut Intake rotor. This large
diameter rotor takes the crop directly from
the pick-up en spreads this evenly to the
pre-chamber.
Where crop chopping is required, the operator
can choose to engage all 23 knives, with a
theoretical cutting length of 45mm, or select
alternate banks of 11 or 12 knives within
seconds. Every single knife is hydraulicly
protected against foreign objects.
Inspecting, sharpening and changing the
knives is a quick and easy job. The knives of
the OmniCut rotor are mounted on a frame
that slides out from the right hand side of
the baler.
Integral Rotor Technology
Vicon’s integration of a feed rotor into the
pickup raises intake performance to a new
level. Large diameter, heavy duty auger flights
are incorporated directly onto the outer
sections of the rotor, giving the crop nowhere
to go, but inside the baler.
5
Power Density
6
With the unique Vicon “Power Density”
Crop is fed from the intake rotor inro the
triggering the feederfork to take an extended
feeding system uniform bale formation is
pre-chamber. A single feeder fork (red)
stroke, sweeping the pre-compressed crop
assured. Power Density constantly adapts
works at twice the speed of the plunger,
up into the bale chamber where the plunger
to the size of crop entering the pre-chamber
continuously clearing the entrance to the
compresses the crop to form the bale.
regardless of wether the baler is working in
pre-chamber and pre-compressing the crop.
a small second cut silage crop or a large swath
As the pre-chamber is filled, pressure is
The ability of the Power Density system to
of dry brittle straw. The result; less bale-
exerted on wedges (white) at the top of the
always feed a consitent volume of crop to
handling, lower twine and wrap usage and
pre-chamber. At a certain point the pre-set
the bale chamber ensures consistent, well
lower haulage cost per ton of crop baled.
pressure on the wedges is overcome,
shaped bales in all conditions.
Suits your Demands
in Every Crop
High efficiency plunger
The plunger is driven directly from the main gearbox. The drive is
transmitted by two crank shafts and two conrods which ensure even
loading on the plunger. The Plunger is supported by extra large
guide rollers (150 mm in diameter) which run on hardened rails,
resulting in minimum friction and minimum wear. In addition the
guide rollers are placed at the easily accessible outside of the bale
chamber, greatly reducing thte risk of fouling and damage. Due to
the optimum shape of balechamber and plunger a very high density
is reached. All greasing points from the plunger are connected to
one central greasing point near the knotters.
Hydraulic system
The hydraulic bale density is controlled from your tractor seat, so
there is no need to leave your tractor. The oilflow is directly driven
from the main gearbox. By the use of a 3 meter long balechamber
this results in a denser bale. The bale is still completely in the
balechamber during tying. This prevents unwanted expansion.
7
Non Stop Baling
The Vicon LB series features a unique fully automatic protection
system for all vital parts in the event of an overload.
The main drive is protected by cam type torque limiters which are automatically activated in
case of an overload. They are located as close as possible to the components they protect,
including the feeder fork, rotor and pickup. No more time wasted replacing shear bolts, since
they have been completely eliminated from the main drivelines.
When a cam clutch is activated, the intake of crop is stopped. The clutch re-engages when the
operator reduces tractor PTO speed. The feeding system then works at low speed to clear
the blockage automatically before normal operation resumes. For maintenance and service
the pre-chamber inspection door easily can be opened for a clear entrance.
Increased reliability with reduced maintenance time
The automatic greasing system reduces maintenance time by taking care of all the greasing
points on the baler. This automatic greasing system is being monitored by the ISOBUS
software.
8
Easy access
With pivoting twine boxes the needle frame
and drivelines are very easily accessible for
monitoring and maintenance. The twine
boxes itself are closed to prevent pollution.
9
Binding without Stress
Less maintenance, more security
The knotters guarantee perfect bale density
by rapid and smooth tying. If the twine is not
running, this can directly be seen in the
tractor cab on the Terminal
Twine release during baling
During baling the twine release is in its normal
position and is holding tension on the twine
to ensure maximum density in the bale.
Twine release during binding
When the needles are coming upwards, the
twine release is becoming active and turns
backwards. The tension on the twine is
reduced and a tension free knot can be made.
Last bale ejector
After releasing the bale chamber pressure
the bale easliy can be moved out of the
balechamber. Standing next to the
balechamber the operator has excellent view
of the process. The bale is being moved out
of the balechamber by two rows of forced
steered tines.
10
11
Comfort in Control
12
ISOBUS
Focus
Tellus
The new LB 1270 and LB 1290 balers are
With the Focus terminal you have total control
The ISOBUS compatible Tellus terminal gives
ISOBUS compatible. That means when your
shown on a large, clear display.
increased clarity with a full-colour screen.
tractor is also ISOBUS compatible you, won’t
With large soft-touch buttons on the Focus
Machine adjustments can easily be made
need a separate control box for the baler.
terminal, baler adjustments can be easily
with the intuitive, large soft-touch keys.
Those who don’t have ISOBUS compatible
made from the comfort of the tractor cab.
The Tellus terminal can also be used with
tractors can use Vicon’s Focus or Tellus
The terminal provides all information needed
many other ISOBUS compatible machines.
control boxes.
and warns in case of errors.
Putting your Energy
into Good Use…
Vicon LB balers are putting the engery into good use
With an LB baler on the field you will have huge capacity against low fuel consumption. Next to that and even as important the baler works in
all crop conditions. Normal agricultural crops like silage and grain are no issue but also the though engery crops like tropical grass and hemp.
These crops can be baled without any adaption to the baler.
The balers are standard equiped with heavy duty bearings, special hardened plunger knives and rails.
The Vicon LB, a Solid baler which produces Solid bales in all conditions.
13
Features
1
10
3
2
7
5
4
9
8
6
1 Wide opening doors
6 Pivoting PU wheels
2 Full cam clutch protection on main drive
7 Power Denstity
3 Good access to flywheel
8 Knive cassete
4 Fits to every tractor
5 Integral rotor
9 Wheels
10 Rollershute
KVERNELAND GROUP
SPARE PARTS
Kverneland Group spare parts are designed to give reliable, safe and
optimal machinery performance - whilst ensuring a low cost life-cycle.
High quality standards are achieved by using innovative production
methods and patented processes in all our production sites.
The Kverneland Group has a very professional network of partners
to support you with service, technical knowledge and genuine parts.
To assist our partners, we provide high quality spare parts and
an efficient spare parts distribution worldwide.
14
Technical Specifications
LB 1270
LB 1270 OC
LB 1290
LB 1290 OC
Width
120
120
120
120
Height
70
70
80 or 90
80 or 90
Length
60 up to 300
60 up to 300
60 up to 300
60 up to 300
Intake width
230
230
230
230
Pickup diameter
34
34
34
34
5
5
5
5
4 Hydr. Cyl.
4 Hydr. Cyl.
Bale dimensions
Pickup
Number of tine bars
Tine spacing
61
Bale chamber
Number of plunjer strokes
46 / min
Plunjer stroke
Density control
69,5
4 Hydr. Cyl.
4 Hydr. Cyl.
Bale chamberlength
300
Control
Focus / Tellus
Tying system
Number of knotters
6
6
6
6
Twine capacity
24
24
24
24
Twine release
Opt.
Opt.
Standard
Standard
Integral rotor
OmniCut
Integral rotor
OmniCut
Knives / cutting length
-
23/4.5
-
23/4.5
Knife protection
-
Single hydr.
-
Single hydr.
Intake system
Intake system
Wheels and Axles
Single axle
500/60-22.5
500/60-22.5
-
-
Single axle (opt)
600/50-22.5
600/50-22.5
600/50-22.5
600/50-22.5
Single axle (opt)
700/40-22.5
700/40-22.5
700/40-22.5
700/40-22.5
Tandem axle steered
16.0/70-20
16.0/70-20
16.0/70-20
16.0/70-20
Tandem axle steered (opt)
500/55-20
500/55-20
500/55-20
500/55-20
Tandem axle steered (opt)
560/45-22.5
560/45-22.5
560/45-22.5
560/45-22.5
Air / hydr.
Air / hydr.
Air / hydr.
Air / hydr.
Length
780
780
800
800
Width
276
276
300
300
Brakes system
Dimensions
Height
270
270
275
275
Weight
8500/9000
8500/9000
8900/9400
8900/9400
75kW (100hp)
87kW (115hp)
98kW (130hp)
109kW (145hp)
Minimum power requirement
Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute
basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group
reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed
from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary,
e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant.
© Kverneland Group Geldrop BV
15
Kverneland Group
Kverneland Group is a leading international
company developing, producing and distributing
agricultural machinery and services.
Strong focus on innovation allows us to provide a unique and
broad product range with high quality. Kverneland Group offers an
extensive package of systems and solutions to the professional
farming community. The offering covers soil preparation, seeding,
forage- and bale equipment, spreading and spraying.
Extensive Product Range
Vicon offers an extensive range of farm
implements: mower conditioners, drum and disc
mowers, tedders, rakes, fixed and variable
chamber round balers, big square balers, bale
wrappers, fertiliser spreaders, maize choppers,
sprayers, soil cultivation and seeding systems.
F-1656-GB
Kverneland Group UK Ltd.
Walkers Lane, Lea Green, St. Helens
Merseyside WA9 4AF, UK
phone 017 448 532 00
[email protected]
www.vicon.eu