1931-71 Willys Catalog Pre-Cut Ready to Install Kits Year • Make

Comments

Transcription

1931-71 Willys Catalog Pre-Cut Ready to Install Kits Year • Make
1931-71
Willys Catalog
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
•Reduce Road Noise
•Reduce Exhaust Harmonics
•Eliminate Mechanical Noise
•Stop Body Panel Vibration
•Reduce Radiated & Reflected Heat
•Stop Audio System Vibration
Pre-Cut Ready to Install Kits
Year • Make • Model Specific
TheCoolestCarsHaveQuietRIDEInside!™
Firewall Insulator
Fits under dash against the
firewall bulkhead. (Sold
Separately)
Floor Kit
Front Floor, Rear Floor,
Transmission Hump/
Driveline
Door Kit
All Doors
Cowl Kit
Panels between the
firewall and front door of
the vehicle.
MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT, CHRYSLER and related logos,
vehicle model names and trade dress are trademarks of Chrysler Group LLC used under
license by QuietRide Solutions LLC. © 2014 Chrysler Group LLC.
For more information, contact us at: [email protected]
©2003-2015 *prices subject to change without notice
9-1-2014
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
6507 Pacific Avenue Ste. 334 Stockton, CA 95207
Place your order: 888-777-3410
Willys
Jeepster, Truck,
Station Wagon and Panel Truck
Automotive Thermal Acoustic Insulation
Pre Cut Kits Ready to Install
Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat
Introducing a multi-stage, automotive insulation
and sound damping system to give Willys
the “quiet riding comfort” found in today’s new
cars. AcoustiSHIELD kits are designed on current “state-of-the-art” auto acoustic technology,
to insulate and control the noise, vibration and
heat in the passen-ger cabin. Kits are pre-cut and
come with easy-to-follow installation instructions----everything you need to do the job right.
Turn Your Willys into “Quiet Riding Comfort”
Stage 1
Sound Damper Pads
Stage 2
Heat Absorber/Barrier Panels
The first stage consists of pre-trimmed, self-adhesive, Sound
Damper Pads, bonded to strategically located trouble spots on
the floor pan and roof of the vehicle to control body panel vibration and noise. These spots are mapped and labeled in detailed
instructions which are included in the kit.
The second stage uses a high-tech absorber/barrier material,
bonded to the body panels, to both sound deaden and insulate
the vehicle from radiant heat penetration from the engine and
road. Each absorber panel is cut to the correct shape and contour and is mapped and labeled in the detailed instructions.
Kits Include:
• Stage 1 Pre-Sized Sound Damper Pads
• Stage 2 Pre-Trimmed Heat Absorber / Barrier
Panels, Spray Adhesive and Sealing Tape
• Complete Illustrated Installation Instruction
Dealer program available. For more information
contact us at [email protected]
©2003-15 Quiet Ride Solutions Prices Subject to Change Without Notice
9-1-2014
Order Line: 888-777-3410
Tech Line:
209-942-4777
Fax: 209-942-4476
6507 Pacific Avenue Ste. 334 Stockton, CA 95207
Willys Truck--Station Wagon--Panel Delivery--Jeepster
Pre Cut Kits Ready to Install
Product Application Codes and Price Sheet
Inventory #
Description
Price
Inventory #
Description
Price
Willys Truck Products
1937-1941 Willys Truck AcoustiShield
1952-1964 Willys Truck
AcoustiShield
WILL 3741-TAK
1937-1941 Willys Truck Complete Kit
490
WILL 3741-TFK
1937-1941 Willys Truck Floor Kit
200
WILL 5264-TAK
1952-1964 Willys Truck Complete Kit
548
WILL 3741-TRCK
1937-1941 Willys Truck Rear Cab Kit
101
WILL 5264-TCK
1952-1964 Willys Truck Cowl Kit
86
WILL 3741-TRK
1937-1941 Willys Truck Roof Kit
114
WILL 5264-TFK
1952-1964 Willys Truck Floor Kit
200
WILL 3741-TDDBIK-2
1937-1941 Willys Truck Door Damper/Barrier Kit
65
WILL 5264-TRCK
1952-1964 Willys Truck Rear Cab Kit
114
WILL 5264-TRK
1952-1964 Willys Truck Roof Kit
114
WILL 5264-TDDBIK-2
1952-1964 Willys Truck Door Damper/Barrier Kit
65
Other 1937-41 Willys Truck Products (Sold Separately)
WILL 3738-CT
1937-1938 Willys Firewall Insulator
244
WILL 3941-CT
1939-1941 Willys Firewall Insulator
244
WILL 4142-CT
1941-1942 Willys Firewall Insulator
244
WILL 3741-THK
1937-41 Willys Truck ABS Headliner Kit
202
WILL 3741-TRCC
1937-41 Willys Truck ABS Rear Cab Cover
146
1947- 1953 Willys Truck AcoustiShield
Other 1952-64 Willys Truck
Products (Sold Separately)
WILL 5053-TWP4
1950-53 Willys Truck/Wagon/Panel 4WD Firewall
244
WILL 5055-WSD2
1950 1/2-55 Willys Wagon/Delivery 2WD Firewall
195
WILL 5456-TWD4
1954-57 WIllys Truck/Wagon 4/6 Cyl Firewall
244
WILL 5759-TWD4
1957-59 WIllys Wagon/Truck 4WD Firewall
244
WILL 4753-TAK
1947-1953 Willys Truck Complete Kit
548
WILL 6062-TWD
1960-62 Willys T/W/D Firewall
217
WILL 4753-TCK
1947-1953 Willys Truck Cowl Kit
86
WILL 6264-TWD/OH
1962 1/2-64 Willys 6-2300 OHC Firewall
202
WILL 4753-TFK
1947-1953 Willys Truck Floor Kit
200
WILL 4664-TSP
1946-1964 Willys Truck Cowl Panel Set
81
1952-1964 Willys Truck Door Panel Set
118
WILL 4753-TRCK
1947-1953 Willys Truck Rear Cab Kit
114
WILL 5264-TDP
WILL 4753-TRK
1947-1953 Willys Truck Roof Kit
114
WILL 4864-THKO
1948-1964 Willys Truck Original Headliner Panel Set
162
65
WILL 4864-THKM
1948-1964 Willys Truck Molded Headliner
342
WILL 4651-TDDBIK-2
1946-1951 Willys Truck Door Damper/Barrier Kit
Other 1947-51 Willys Truck Products (Sold Separately)
WILL 4751-TIK
1947-1951 Willys Truck Interior Upholstery Panel Kit
206
WILL 4664-TSP
1946-1964 Willys Truck Cowl Panel Set
86
WILL 4651-TDP
1946-1951 Willys Truck Door Panel Set
127
WILL 4864-THKO
1948-1964 Willys Truck Original Headliner Panel Set
162
WILL 4864-THKM
1948-1964 Willys Truck Molded Headliner
342
WILL 4750-T4WD
1947-1950 Willys Truck 4WD Firewall
195
WILL 3336-77-C
1933-1936 Willys Series 77 Firewall
244
244
WILL 3336-77-BBC
1933-1936 Willys Series 77 Battery Box Cover
87
195
WILL 3942-CTIK
1939-1942 Willys Coupe Interior Upholstery Panel Kit
262
WILL 4248-JMB
1942-1948 Willys Jeep-MB Firewall
212
WILL 5053-TWP4
WILL 5055-WSD2
1950-53 Willys Truck/Wagon/Panel 4WD Firewall
1950 1/2-55 Willys Wagon/Delivery 2WD Firewall
Early Willys Products
Early Willys Cars 1933-1948
Direct Sheetmetal
Big Block Firewall
Insulator
for 1937-42
Cars and Trucks
DS 3742BBW-CT4
©2003-15 Quiet Ride Solutions Prices
Subject to Change Without Notice
1937-1942 Direct Shtmetal Willys Big Block Firewall 4” Setbk
202
For more information visit: www.quietride.com or contact us at [email protected]
1937-41 Willys Truck
Complete AcoustiShield Insulation Kit
WILL 3741-TAK
Automotive Thermal Acoustic Insulation
Cowl Kit
Floor Kit
Roof Kit
In Production
Photo Coming Soon
Rear Cab Kit
Door Insulation
Included with Complete Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Firewall Insulator for this Vehicle
(Sold Separately)
1937-41 Willys Truck
Other Products Available for this Vehicle
Willys 3741-THK
ABS Headliner Kit
(Sold Separately)
Willys 3741-TRCC
ABS Truck Rear Cab Cover
(Sold Separately)
Willys 3741-TDP
ABS Door Panel Kit
(Sold Separately)
Willys 3741-TSP
ABS Cowl Panels Set
(Sold Separately)
1947-51 Willys Truck
Complete AcoustiShield Insulation Kit
WILL 4751-TAK
Automotive Thermal Acoustic Insulation
Cowl Kit
Front Floor Kit
Roof Kit
Rear Cab Kit
Rear Cab Floor
Door Insulation
Included with Complete Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Firewall Insulator for this Vehicle
(Sold Separately)
1947-51 Willys Truck
Other Products for this Vehicle
Cowl Upholstery Panel Set
Door Upholstery Panel Set
Finally
The Willys Headliner the Factory left out.
Molded to fit the compound curves of the rear cab
quarter panels. Includes specially modified windshield header panel and the side strips. These are a
slightly different shaped than the stock “headliner
parts pictures to the right.
WILL 4751-THKM
1948-64 Willys Headliner Kit
Willys 4751-THK
(Sold Separately)
1952-64 Willys Truck
Complete AcoustiShield Insulation Kit
WILL 5264-TAK
Automotive Thermal Acoustic Insulation
Cowl Kit
Front Floor Kit
Roof Kit
Rear Cab Kit
Rear Cab Floor
Door Insulation
Included with Complete Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Firewall Insulator for this Vehicle
(Sold Separately)
Willys made firewall insulators that
fit multiple years and body styles.
Please see last page
for photos and descriptions.
1952-64 Willys Truck
Other Products for this Vehicle
Finally
The Willys Headliner the Factory left out.
Molded to fit the compound curves of the
rear cab quarter panels. Includes specially
modified windshield header panel Quarter panels and the side strips. These are
a slightly different shaped than the stock
“headliner parts pictures to the right.
1947-64 Willys Headliner Kit
Willys 5264-THK
(Factory Stock Style)
WILL 5264-THKM
Willys 1952-64 Leather Grained
Door Panel Set
Large Door Handle Hole
WILL 5259-TDP
Willys 1947-64 Leather Grained
Cowl Panel Set
WILL 4764-TSP
Willys Station Wagon and Panel Delivery and 150-FC Truck
Pre Cut Kits Ready to Install
Product Application Codes and Price Sheet
Willys Panel Delivery & Station Wagon Products
Inventory #
Description
1946-1951 Willys Panel Truck AcoustiShield
Price
Inventory #
WILL 4651-TDP
Description
1946-1951 Willys Truck Door Panel Set
Price
113
WILL 4651-PDAK
1946-1951 Willys Panel Truck Complete Kit
705
WILL 4651-PDBPK
1946-1951 Willys Panel Truck Body Panel Kit
140
WILL 4651-PDCK
1946-1951 Willys Panel Truck Cowl Kit
76
WILL 5264-SWAK
1952-1964 Willys Stat Wagon Complete Kit
673
WILL 4651-PDFFK
1946-1951 Willys Panel Truck Front Floor Kit
178
WILL 5264-SWBPK
1952-1964 Willys Stat Wagon Body Panel Kit
107
WILL 4651-PDRDK
1946-1951 Willys Panel Truck Rear Door Kit
97
WILL 5264-SWCK
1952-1964 Willys Stat Wagon Cowl Kit
76
WILL 4651-PDRFK
1946-1951 Willys Panel Truck Rear Floor Kit
50
WILL 5264-SWFFK
1952-1964 Willys Stat Wagon Floor Kit
178
WILL 4651-PDRK
1946-1951 Willys Panel Truck Roof Kit
140
WILL 5264-SWRFK
1952-1964 Willys Stat Wagon Rear Floor Kit
50
WILL 4651-TDDBIK-2
1946-1951 Willys Truck Door Damper/Barrier Kit
57
WILL 5264-SWRDK
1952-1964 Willys Stat Wagon Rear Door Kit
97
WILL 5264-SWRK
1952-1964 Willys Stat Wagon Roof Kit
140
WILL 5264-TDDBIK-2
1952-1964 Willys Truck Door Damper/Barrier Kit
57
WILL 5053-TWP4
1950-53 Willys Truck/Wagon/Panel 4WD Firewall
217
WILL 5055-WSD2
1950 1/2-55 Willys Wagon/Delivery 2WD Firewall
173
WILL 5456-TWD4
1954-57 WIllys Truck/Wagon 4/6 Cyl Firewall
217
WILL 5759-TWD4
1957-59 WIllys Wagon/Truck 4WD Firewall
217
WILL 6062-TWD
1960-62 Willys T/W/D Firewall
217
WILL 6264-TWD/OH
1962 1/2-64 Willys 6-2300 OHC Firewall
202
WILL 4664-TSP
1946-1964 Willys Truck Cowl Panel Set
71
WILL 4651-TDP
1946-1951 Willys Truck Door Panel Set
113
WILL 4664-SWHKS
1946-1964 Willys Wagon 6-Piece Headliner Panel Set
57
WILL 5259-SWHK
1952-1959 Willys Wagon Molded Headliner Panel
XXX
WILL 6064-SWHK
1952-1959 Willys Wagon Molded Headliner Panel
XXX
Other 1946-51 Willys Panel Truck Parts (Sold Separately)
WILL 4647-WSD2
1946-1947 Willys Wagon/Delivery 2WD Firewall
173
WILL 4750-T4WD
1947-1950 Willys Truck 4WD Firewall
173
WILL 5053-TWP4
1950-53 Willys Truck/Wagon/Panel 4WD Firewall
217
WILL 5055-WSD2
1950 1/2-55 Willys Wagon/Delivery 2WD Firewall
173
WILL 4664-TSP
1946-1964 Willys Truck Cowl Panel Set
71
WILL 4651-TDP
1946-1951 Willys Truck Door Panel Set
113
WILL 4651-SWFK
1946-1951 Willys Station Wagon Floor Kit
228
1952-1964 Willys Panel Truck AcoustiShield
WILL 5264-PDAK
1952-1964 Willys Panel Truck Complete Kit
705
WILL 5264-PDBPK
1952-1964 Willys Panel Truck Body Panel Kit
140
WILL 5264-PDCK
1952-1964 Willys Panel Truck Cowl Kit
76
WILL 5264-PDFFK
1952-1951 Willys Panel Truck Front Floor Kit
178
WILL 5264-PDRFK
1952-1951 Willys Panel Truck Rear Floor Kit
50
WILL 5264-PDRDK
1952-1964 Willys Panel Truck Rear Door Kit
97
WILL 5264-PDRK
1952-1964 Willys Panel Truck Roof Kit
140
WILL 5264-TDDBIK-2
1952-1964 Willys Truck Door Damper/Barrier Kit
57
Other Willys Panel Truck Parts (Sold Separately)
WILL 5053-TWP4
1950-53 Willys Truck/Wagon/Panel 4WD Firewall
217
WILL 5055-WSD2
1950 1/2-55 Willys Wagon/Delivery 2WD Firewall
173
WILL 5456-TWD4
1954-57 WIllys Truck/Wagon 4/6 Cyl Firewall
217
WILL 5759-TWD4
1957-59 WIllys Wagon/Truck 4WD Firewall
217
WILL 6062-TWD
1960-62 Willys T/W/D Firewall
217
WILL 6264-TWD/OH
1962 1/2-64 Willys 6-2300 OHC Firewall
202
WILL 4664-TSP
1946-1964 Willys Truck Cowl Panel Set
71
1952-1964 Willys Station Wagon AcoustiShield
Other 1952-64 Willys Station Wagon Truck Parts
(Sold Separately)
Other Willys AcoustiSHIELD Insulation Kits
are available upon request.
Please Call for Availability.
Willys 150 FC
1956-1965 Willys 150 FC
Will 5665FC150-THK
©2003-15 Quiet Ride Solutions
Prices Subject to Change Without Notice
1956-65 Willys FCorward Control 150 Headliner Kit
218
For more information visit: www.quietride.com or contact us at [email protected]
1946-51 Willys Station Wagon
Complete AcoustiShield Insulation Kit
WILL 8086-SWAK
Automotive Thermal Acoustic Insulation
Cowl Kit
Floor Kit
Roof Kit
Station Wagon Body Panel Kit
Rear Floor Kit
Door Insulation
Included with Complete Kit
Firewall Insulator for this Vehicle
(Sold Separately)
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Willys made firewall insulators that
fit multiple years and body styles.
Please see last page
for photos and descriptions.
1946-51 Willys Station Wagon
Other Products for this Vehicle
Willys 1947-64 Leather Grained
Cowl Panel Set
WILL 4651-TSP
Willys 1952-64
Station Wagon
Leather Grained Interior 6-Piece Headliner
Trim Panel Set
WILL 5264-SWHK
Willys 1947-51 Leather Grained
Door Panel Set
Small Door Handle Hole
WILL 4651-TDP
Willys 1947-51 Leather Grained
Door Panel Set
Small Door Handle Hole
WILL 4651-TDP
Willys 1952-64
Station Wagon
Leather Grained Interior Body Panel Set
WILL 5264-SWK
1952-64 Willys Panel Delivery Truck
Complete AcoustiShield Insulation Kit
WILL 5264-PDAK
Automotive Thermal Acoustic Insulation
Cowl Kit
Front Floor Kit
Roof Kit
Panel Delivery Body Panel Kit
Rear Floor Kit
Door Insulation
Included with Complete Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Firewall Insulator for this Vehicle
(Sold Separately)
Willys made firewall insulators that
fit multiple years and body styles.
Please see last page
for photos and descriptions.
1952-64 Wilys Panel DeliveryTruck
Other Products for this Vehicle
Willys 1952-59 Panel Delivery Truck
Molded Headliner
WILL 5259-PDHK
Willys 1952-64 Leather Grained
Door Panel Set
Large Door Handle Hole
WILL 5259-TDP
Willys 1960-64 Panel Delivery Truck
Molded Headliner
WILL 6064-PDHK
Willys 1947-64 Leather Grained
Cowl Panel Set
WILL 4651-TSP
1956-65 Willys FC-150
Forward Cab Headliner
WILL 5665FC150-THK
This product requires additional production work prior to installation .
Please place your order through our
partner:
www.wIllysamerica.com
707-632-5258
“Fits Like a Glove”
Willys Jeepster 1948-73
Product Application Codes and Price Sheet
Willys Jeepster Products
Inventory #
Description
Price
1948-1951 Willys Jeepster AcoustiShield
Inventory #
Description
Price
1966-1973 Jeepster Station Wagon
WILL 4851-JPSTRAK
1948-51 Willys Jeepster Complete Kit
549
WILL 4851-JPSTRBPK
1948-51 Willys Jeepster Body Panel Kit
171
WILL 4851-JPSTRCK
1948-51 Willys Jeepster Cowl Kit
86
WILL 4851-JPSTRFK
1948-51 Willys Jeepster Floor Kit
256
WILL 4651-TDDBIK-2
1946-1951 Willys Truck Door Damper/Barrier Kit
65
1952-1964 Willys Jeepster AcoustiShield
WILL 5264-JPSTRAK
1952-1964 Willys Jeepster Complete Kit
549
WILL 5264-JPSTRBPK
1952-1964 Willys Jeepster Body Panel Kit
171
WILL 5264-JPSTRCK
1952-1964 Willys Jeepster Cowl Kit
86
WILL 5264-JPSTRFK
1952-1964 Willys Jeepster Floor Kit
256
WILL 5264-TDDBIK-2
1952-1964 Willys Truck Door Damper/Barrier Kit
65
Other Willys Jeepster Products (Sold Separately)
WILL 4849-J
1948-49 Willys Jeepster Firewall
195
WILL 4851-JIK
1948-1951 Willys Jeepster Interior Upholstery Panel Kit
229
WILL 5051-J
1950-51 Willys Jeepster Firewall
195
WILL 5053-TWP4
1950-53 Willys Truck/Wagon/Panel 4WD Firewall
244
WILL 5055-WSD2
1950 1/2-55 Willys Wagon/Delivery 2WD Firewall
173
WILL 5456-TWD4
1954-57 WIllys Truck/Wagon 4/6 Cyl Firewall
244
WILL 5759-TWD4
1957-59 WIllys Wagon/Truck 4WD Firewall
244
WILL 6062-TWD
1960-62 Willys T/W/D Firewall
244
WILL 6264-TWD/OH
1962 1/2-64 Willys 6-2300 OHC Firewall
227
WILL 4664-TSP
1946-1964 Willys Truck Cowl Panel Set
81
Other Willys Jeepster Products (Sold Separately)
JEEP 6673-SWAK
1966-73 Jeepster Station Wagon
Complete Acoustic Insulation Kit
690
JEEP 6673-SWFK
1966-73 Jeepster Station Wagon
Floor Insulation Insulation
256
JEEP 6673-SWCK
1966-73 Jeepster Station Wagon
Cowl Insulation Kit
86
JEEP 6673-SWRFK
1966-73 Jeepster Station Wagon
Rear Floor Insulation Kit
158
JEEP 6673-SWBPK
1966-73 Jeepster Station Wagon
Body Panel Insulation Kit
158
JEEP 6673-DDBIK-2
1966-73 Jeepster Door Kit
65
1966-1973 Jeepster Convertible/Roadster
JEEP 6673-CVRAK
1966-73 Jeepster Convertibler/Roadster
Complete Acoustic Insulation Kit
690
JEEP 6673-CVRFK
1966-73 Jeepster Convertibler/Roadster
Floor Insulation Insulation
256
JEEP 6673-CVRCK
1966-73 Jeepster Convertibler/Roadster
Cowl Insulation Kit
86
JEEP 6673-SRFK
1966-73 Jeepster Convertibler/Roadster
Rear Floor Insulation Kit
158
JEEP 6673-CVRBPK
1966-73 Jeepster Convertibler/Roadster
Body Panel Insulation Kit
158
JEEP 6673-DDBIK-2
1966-73 Jeepster Commando Door Kit
65
1966-1973 Jeepster Commando Pickup Truck SC-1
JEEP 6673SC1-TAK
1966-71 Jeepster Commando Pickup Truck SC-1
Complete Acoustic Insulation Kit
690
JEEP 6673SC1-TFK
1966-71 Jeepster Commando Pickup Truck SC-1
Floor Insulation Insulation
256
JEEP 6673SC1-TCK
1966-71 Jeepster Commando Pickup Truck SC-1 Cowl
Insulation Kit
86
JEEP 6673SC1-TFRK
1966-71 Jeepster Commando Pickup Truck SC-1 Roof
Insulation Kit
114
WILL 5053-TWP4
1950-53 Willys Truck/Wagon/Panel 4WD Firewall
244
WILL 5055-WSD2
1950 1/2-55 Willys Wagon/Delivery 2WD Firewall
173
WILL 5456-TWD4
1954-57 WIllys Truck/Wagon 4/6 Cyl Firewall
244
WILL 5759-TWD4
1957-59 WIllys Wagon/Truck 4WD Firewall
244
WILL 6062-TWD
1960-62 Willys T/W/D Firewall
244
JEEP 6673-DDBIK-2
1966-73 Jeepster Commando Door Kit
65
WILL 6264-TWD/OH
1962 1/2-64 Willys 6-2300 OHC Firewall
227
65
1946-1964 Willys Truck Cowl Panel Set
81
JEEP 6673SC1TDDBIK-2
1966-13 Jeepster Pickup Truck SC-1 Door Kit
WILL 4664-TSP
WILL 5264-TDP
1952-1964 Willys Truck Door Panel Set
127
WILL 5264-TIK
1952-1964 Willys Truck Interior Upholstery Panel Kit
184
©2003-15 Quiet Ride Solutions
Prices Subject to Change Without Notice
Other Jeepster Parts (Sold Separately)
JEEP 6673-CVT-DP
1966-1971 Jeepster Commando Convert Door Panel Set
146
JEEP 6671-J
1966-1971 Jeepster Commando Firewall
212
For more information visit: www.quietride.com or contact us at [email protected]
1948-51 Willys Jeepster
Complete AcoustiShield Insulation Kit
Automotive Thermal Acoustic Insulation
Cowl Kit
WILL 4851-JPSTRAK
Front Floor Kit
Body Panel Kit
Rear Floor Kit
Door Insulation
Included with Complete Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Firewall Insulator for this Vehicle
(Sold Separately)
Willys made firewall insulators that
fit multiple years and body styles.
Please see last page
for photos and descriptions.
1948-51 Willys Jeepster
Other Products for this Vehicle
Willys 4851-JIK
ABS Interior Panel Kit
(Sold Separately)
Willys 1947-51 Leather Grained
Door Panel Set
Small Door Handle Hole
WILL 4651-TDP
1952-64 Willys Jeepster
Complete AcoustiShield Insulation Kit
Automotive Thermal Acoustic Insulation
Cowl Kit
WILL 8086-JPSTRAK
Front Floor Kit
Body Panel Kit
Rear Floor Kit
Door Insulation
Included with Complete Kit
Firewall Insulator for this Vehicle
(Sold Separately)
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Willys made firewall insulators that
fit multiple years and body styles.
Please see last page
for photos and descriptions.
1952-64 Willys Jeepster
Other Products for this Vehicle
Willys 5264-JIK
ABS Interior Panel Kit
Willys 1952-64 Leather Grained
Door Panel Set
Large Door Handle Hole
WILL 5259-TDP
Automotive Thermal Acoustic Insulation
Cowl Kit
Body Panel Kit
1966-73 Willys Jeepster Commando
Station Wagon
Complete AcoustiShield Insulation Kit
JEEP 6673-SWAK
Front Floor Kit
Roof Kit
n n
o
i
t
c Soo
u
d ng
o
r
P omi
n
I
C
s
o
ot Rear Cab Floor
h
P
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Door Insulation
Included with Complete Kit
Firewall Insulator and Headliner for this Vehicle
(Sold Separately)
1966-73 Commando
Station Wagon Headlner
Coming Soon
JEEP 6773-J
Automotive Thermal Acoustic Insulation
Cowl Kit
1966-73 Willys Jeepster Commando
Convertible/Roadster
Complete AcoustiShield Insulation Kit
JEEP 6673-CVAK
Front Floor Kit
Roof Kit
n n
o
i
t
c Soo
u
d ng
o
r
P omi
n
I
C
s
o
t
o
Ph Rear Cab Floor
Body Panel Kit
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Door Insulation
Included with Complete Kit
Firewall Insulator for this Vehicle
(Sold Separately)
WILL 6773-J
Automotive Thermal Acoustic Insulation
1966-73 Willys Jeepster Commando
Pickup Truck
Complete AcoustiShield Insulation Kit
JEEP 6673SC1-T
Cowl Kit
Body Panel Kit
Front Floor Kit
Roof Kit
n n
o
i
t
c Soo
u
d ng
o
r
i
P
m
In Co
s
o
t
o
Ph Rear Cab Floor
Products are available separately
or as complete kits.
See Catalog
for other products available for
this vehicle.
Door Insulation
Included with Complete Kit
Firewall Insulator and Headliner for this Vehicle
(Sold Separately)
1966-73 Commando
SC-1 Truck Headlner
Coming Soon
JEEP 6773-J
Willys
i
om
C
o
t
Pho
WILL 3336-C
1933-36 Willys Model 77
Firewall Insulator
om
C
hoto
P
on
So
g
n
i
n
oo
ng S
WILL 3941-CT
1939-1941 Willys Firewall Insulator
Fits both Car and Truck
WILL 4142-CT
1941-1942 Willys Firewall Insulator
Fits both Car and Truck
WILL 3336-77-BBC
1933-1936 Willys Series 77
Battery Box Cover ABS Plastic
DS 3742BBW-CT4
1939-1942 Willys Street Rod
Fits Direct Sheetmetal after market steel
Firewall
WILL 3738-CT
1937-1938 Willys Firewall Insulator
Fits both Car and Truck
WILL 4248-JMB
1942-1948 Willys Jeep-MB (Military)
Firewall Insulator
Willys
WILL 4647-WSD2
1946-1947 Willys
Station Wagon & Panel Delivery
2-WD Firewall Insulator
WILL 5051-J
1950-51 Willys Jeepster
Firewall Insulator
WILL 4750-T4WD
1947-1950 Willys Truck
4-WD Firewall Insulator
WILL 5055-WSD2
1950 1/2-55 Willys Station Wagon & Delivery
2WD Firewall Insulator
WILL 4849-J
1948-49 Willys Jeepster
Firewall Insulator
WILL 5053-TWP4
1950-53 Willys
Truck- Station Wagon & Panel Delivery
4-WD Firewall Insulator
Willys
WILL 5456-TWD4
1954-56 WIllys Truck & Station Wagon
4 or 6 Cylinder Firewall Insulator
WILL 6264-TWD/OH
1962 1/2-64 Willys 6-2300 OHC
Firewall Insulator
WILL 5759-TWD4
1957-59 WIllys Station Wagon & Truck
4-WD Firewall Insulator
WILL 6771-J
1966-71 WIllys Jeepster Firewall Insulator
WILL 6062-TWD
1960-62 Willys
Truck-Station Wagon & Panel Delivery
Firewall Insulator
WILL 6771-JDP
1966-71 WIllys Jeepster Door Panel Set
Automotive Thermal Acoustic Insulation
A Roof to Road Solution to Control
Passenger Cabin Noise, Vibration and Heat
TM
AcoustiSHIELD Product Description
AcoustiShield is a two-stage thermal acoustic automotive insulation
product designed to control Noise, Vibration and Heat—the three
major issues that affect passenger cabin comfort. Kits include pre-cut,
ready-to-install Dynamat Xtreme® damper pads and HeatShield
Barrier Insulation panels which are packaged separately for easy
installation. Kits come with uniquely illustrated installation sheets,
spray adhesive and seam tape.
Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor,
Doors and Body Panels, which includes the seat divider, package tray and
rear wheel wells. The installation of a complete AcoustiShield kit
typically will reduce passenger cabin noise by 12 to 17 decibels. To put
this in perspective, a 10-decibel reduction is a 50 percent reduction
in noise that the human ear can easily detect. Barrier insulation will
reduce radiant heat by as much as 25 degrees.
AcoustiShield is a Two-Stage Process
Stage-One of the AcoustiShield process is the application of
small pre-cut Dynamat Xtreme® damper pads and strips to auto
body sheet metal to greatly reduce the vibration and noise
produced by these panels from entering the passenger cabin.
Quick Link
Stage-Two of the AcoustiShield process is the application of
pre-cut HeatShield Barrier Insulation panels to the auto body sheet
metal to encapsulate any remaining vibration/noise and to
thermally insulate the vehicle.
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD”, AcoustiHOOD and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Expanded NVH Reference Information:
Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple
directions--including internal and external air-borne noise, structure-borne noise as well as
radiant heat. NVH factors to consider:
•Engine NVH travels back from the front of the vehicle through the firewall and cowl.
•Wheel well trunk and rear body panel NVH travels forward through the seat divider and
package tray panels.
•Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans.
•Rumbling performance exhaust systems and transmission/drive line harmonics also rise
through vehicle floor pans.
•Direct heat from the sun penetrates the roof of the vehicle.
All of these influences “Apex” in the middle of the passenger cabin at ear level.
Add the noise produced by the sound system; the air rushing through the vents from the
HVAC system; and a normal conversation builds into a “shouting match” between the driver
and passenger to overcome the “harmonic drone” of vehicle mechanics.
AcoustiShield Photo Gallery
Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.
Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation.
Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.
Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.
Typical Body Panel Sound Dampening and Thermal Barrier Insulation.
Made Right---Fit Right---Look Right
OEM Original Products
Firewall Insulator products are
pre-cut and ready to install with
standard OEM accessory and
mounting holes punched for
restoration applications. Each unit
has period correct insulation.
ABS Leather Grain Material
“Ultra High Definition”
Vinyl Rubber
Firewall Insulators are also
available without holes for
aftermarket HVAC systems and
Street Rod and Custom installs.
Street Rod Firewall Insulator
Direct Sheetmetal
Absolute Sheetmetal
Quick Link
ABS “Chicken Track” Material
Product Description—
ABS “Chicken Track Grain”
Early Ford Original Equipment Firewall Insulators
Production Period—FOMOCO: 1928 through 1948
Production Period--Some Early Mopar Vehicles
FOMOCO cars and trucks used a
unique “chicken track” texture on
their firewall insulator covers and
related products from 1928 through
1948. Quiet Ride has faithfully
reproduced this famous texture
and offers it exclusively on its ABS
molded firewall insulators and truck
headliners, cowl and door panels.
Each insulator product is molded
with an ABS material and readyto-install with Heat Shield Thermal
Barrier insulation, factory stock
accessory holes and mounting pin
locations punched.
Ford style steel mounting pins are
not included but are available for
separate purchase as needed.
ABS Firewall Cover
Chicken Track Grain Material
Each insulator product is
molded from an “out of the car”
original firewall for contour and
accuracy.
Year-Make-Model Specific.
MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT,
CHRYSLER and related logos, vehicle model names and trade
dress are trademarks of Chrysler Group LLC used under licenseby QuietRide Solutions LLC. © 2014 Chrysler Group LLC.
Firewall Insulators can be ordered without holes for
custom applications.
Product Description—
ABS “Leather Grain”
Original Equipment Firewall Insulators
Production Period—GM and MOPAR: 1926 through 1976
Production Period—FOMOCO: 1949 through 1979
ABS Firewall Cover
Most OEMs used a leather grained
firewall cover on their cars and
trucks from 1926 through 1965.
Each insulator product is molded
with ABS material and ready-toinstall with factory stock accessory
holes and mounting pin locations
punched.
Kits does not include mounting
pins. Quiet Ride has an assortment
of “universal” mounting pin styles
available as needed.
Mounting pins are not included but
are available for separate purchase as
needed.
Leather Grain Material
Each insulator product is
molded from an “out of the car”
original firewall for contour and
accuracy.
Year-Make-Model Specific.
MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT,
CHRYSLER and related logos, vehicle model names and trade
dress are trademarks of Chrysler Group LLC used under licenseby QuietRide Solutions LLC. © 2014 Chrysler Group LLC.
Firewall Insulators can be ordered without holes for
custom applications.
Product Description—
“Ultra High Definition Vinyl Rubber“
Original Equipment Firewall Insulators
for General Motors Cars and Ford Cars and Trucks
Production Period—GM: 1964 to present
Production Period—FOMOCO: 1964 to present
FOMOCO and General Motors
began using a rubber based firewall
material in 1964 with the
introduction of the Mustang,
Chevelle family and Camaro Cars.
Quiet Ride molds these products using a “Ultra High Definition” vinyl
rubber. It comes ready to install
with a Heat Shield Thermal Barrier
insulation pad. Factory stock accessory holes and mounting pin locations are punched.
Kits include appropriate period
mounting pins.
Each insulator product is
molded from an “out of the car”
original firewall for contour and
accuracy.
Year-Make-Model Specific.
Firewall Insulators can be ordered without holes for
custom applications.
Product Description—Street Rod Firewall Insulators
Direct Sheetmetal
Absolute Sheetmetal (formerly Bitchin Products)
Production Period—FOMOCO: 1928 through 1956
Production Period--GM: 1936 through 1972
Street Rod Firewall Insulators are
based on the steel after-market
firewalls that are manufactured by
Direct Sheetmetal and Absolute
Sheetmetal (formerly Bitchin Products) to stop the heat and noise generated by large engine installed in
smaller, older vehicles. Each
insulator product is molded with
ABS Leather grain material to fit the Each Street Rod Firewall Insulator
product is molded from a steel
steel engine and transmission recess
“like a glove.” All street rod products mold provided by the manufacturer
to achieve contour and accuracy.
are year, make and model specific,
Year-Make-Model Specific.
and come ready to install with a
double layer of Heat Shield Thermal
Barrier insulation pad.
There are no mounting holes or
accessory cut-outs so customers can
achieve that “smooth” look in the
engine bay and passenger
compartment.
Customer must decide method of
installation. Quiet Ride makes a
Street Rod mounting pin kit,
available separately.
Thermal Insulation Types
Original Equipment Firewall Insulators
•General Motors Cars and Trucks
•Ford Cars and Trucks
•MOPAR Cars and Trucks
Black Fiberglass Insulation
Typically used in vehicles 1949 through 1977
•ABS Firewall Insulators
Heat Shield Barrier Insulation
Typically used in vehicles 1928-48 and
Vinyl Rubber Firewalls 1964-present
•Street Rods
•Custom Firewalls
Concours Show Quality
Authentically Correct---“Fit like a Glove”---Easy to Install
All QRS Products, Materials and Craftsmanship
Meet or Exceed OEM Quality Standards
No customer has ever reported losing judged points on our firewall products.
Firewall Insulators--A Historical Perspective
The Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat
that is generated in the engine bay of the vehicle.
QRS manufactures more than 600 firewall products for antique, classic, custom and street rod
cars and trucks. The company has developed these products based on “out of car” original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact
reproductions of OEM products.
Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil
impregnated cardboard cover in combination with a number of insulation materials. In 1964
General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to
a thin layer of “shody” insulation.
All of the company’s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System
for accurate fitting. Each firewall cover is backed with period correct insulation which could
include a black fiberglass or HeatShield barrier insulation.
Firewall Colors and “Sheen”
Just a word about the “look” of your old firewall in comparison to a new one--you may may note
that the new firewall does not look the same as your original--because of the “sheen.” The
firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and
dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean
and sparkling fresh.
With few exceptions, firewall insulators were black when they came from the factory. There were
some exceptions in the General Motors product line from 1933 through 1941 in which the
firewall insulators were a “mocha brown” color. The firewall color would typically match the
color of your clutch, brake and accelerator pedal rubber pads.
6507 Pacific Avenue--Ste 334 Stockton, CA 95207
Order Line: 888-777-3410
Tech Line (209) 942-4777
Fax (209) 942-4476
www.quietride.com
©2003-15 Quiet Ride Solutions LLC.
“AcoustiSHIELD” and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.
Fasteners
and Screws
Firewall Mounting Pin Options
For Older Cars and Trucks
American Cars and Trucks used a wide variety of mounting pins, clips, buttons and
screws to attach the firewall insulator to the interior of the steel firewall bulkhead.
Clean up and reuse your original mounting pins if you have them. We offer the
fol-lowing mounting pins and information based on what we have been able to find
avail-able.
Early Ford Firewall Mounting Pins
These all steel firewall mounting pins are a reproduction of the originals. They are
available in a 3/4 inch length (Long) and in a 1/2 inch length (Short). The long pins
work best for the early production cars and trucks. The Short pin works best for the
1942-48 cars and 1940-47 Trucks. The long pins may have been used in Ford cars as
late as 1954. The short pins may have been used in Ford Trucks through the mid 1950s.
Ford 3541-MPL 1935-41 Ford Firewall Mounting Pin-Long ........................... $3
Ford 4147-MPS 1941-47 Ford Firewall Mounting Pin-Short ........................... $3
GM Firewall Mounting Plugs
General Motors started using a plastic firewall mounting plug to attach the insulator
in the mid 1950s--1955 for Trucks and 1957 for Cars. These plugs are still used in
GM vehicles today.
GM 5500-MP 1955 to Present General Motors Mounting Plug ........................ $3
Street Rod Mounting Pins
With this new mounting pin kit, you can weld up your firewall mounting holes and
install any of our insulators for that “smoothie look.” Kit includes nine pin-sets and
installation instructions.
SRMP Street Rod Firewall Mounting Pin Kit ................................................. $34
Universal Mounting Pins
If your original firewall mounting pins are missing or damaged beyond repair, these
universal pins may be a solution. They are a plastic “Christmas tree” type pin that
will fit most 5/16 inch holes. Kit includes 10 pins.
UMPS-10 Universal Mounting Pin Set .............................................................. $20
Universal Wire Cap
A variety of car and truck manufacturers in the 1930s used a wire cap retainer to
mount the firewall insulator. These are still available in a Long (1/2 inch) and Short
(1/4 inch) variety and have a 1/2 inch button head that can be painted. To match the
firewall color.
UWC-MPL Universal Wire Cap Mounting Pin Long ....................................... $1
UWC-MPS Universal Wire Cap Mounting Pin Short ........................................ $1
©2003-15 Quiet Ride Solutions
Prices Subject to Change Without Notice
For more information visit: www.quietride.com or contact us at [email protected]

Similar documents