Onyx 1220i
Transcription
Onyx 1220i
Onyx 1220i PREMIUM PRODUCTION MIXER WITH FIREWIRE Onyx 1220i The Onyx 1220i features four full mono mic/line channels (each with 3-band Perkins EQ and mid-frequency sweep), four stereo channels (each with 3-band Perkins EQ), two aux sends on all channels with pre/post capability and a powerful master section. The Onyx 1220i is equipped with 16x2 FireWire capability, allowing all channels, aux sends and main L/R to be routed to any desired DAW, including Pro Tools® 9 and M-Powered™ 8. The FireWire output from the computer may be brought back straight into a channel strip for easy mix integration. FireWire aggregation allows multiple Onyx 1220i mixers to be connected. Each mono channel has an Onyx mic preamp, phantom power, an input Gain control with 60 dB of gain, a sharp 18 dB/octave, 75 Hz Low Cut filter, Pan, Mute, Solo, a 60mm fader and a Channel Insert jack for connecting an external processor. FEATURES: ■ 12-channel premium analog mixer with integrated 24-bit / 96 kHz FireWire I/O ■ Four Onyx boutique quality mic preamps There are built-in DIs on the first two channels for direct connection of guitars or bass and a dedicated talkback section for easy communication with band members on stage or during recording sessions. ■ 3-band Perkins EQ with sweepable mids on mic/line channels Other features include a stereo tape input and output, a 1/4-inch stereo headphone jack, stereo 12-segment LED meters and XLR and TRS stereo output jacks. ■ 16x2 FireWire routing for simultaneous streaming of aux sends, main L/R and pre/post EQ assignment for all channels The Control Room/Phones section has its own level control, outputs and input matrix for selecting any combination of Main Mix, Tape In and Alt 3-4. The Onyx 1220i is compact and rack-mountable. Plus, it’s a Mackie which means it is “Built-Like-A-Tank” and will survive years of abuse. ■ 3-band Perkins EQ on stereo line channels ■ Compatible with most major DAWs • Pro Tools® 9 / M-Powered™ 8 • Logic® • SONAR™ • Cubase® • Ableton® Live • Final Cut Pro® • ...and more ■ Stereo playback from DAW, returned to control room or into channel for integration into mix ■ Built-in DI on first two channels for direct connection of guitars, bass, etc. ■ Individual 48V phantom power switches on all mic inputs ■ Talkback section with built in mic and flexible routing APPLICATIONS Live sound mixing, houses of worship, clubs, gymnasiums, banquet halls, conference rooms, boardrooms, multitrack studio and field recording, video post-production, multimedia applications, broadcast, and many, many more. ■ “Planet-Earth” switching power supply for worldwide use ■ Optional rack kit available ■ Includes Tracktion 3™ Music Production Software for Mac or PC 1/7 PAGES Onyx 1220i PREMIUM PRODUCTION MIXER WITH FIREWIRE Onyx 1220i SPECIFICATIONS Noise Characteristics Attenuation and Crosstalk Equivalent Input Noise (EIN), mic input at insert, 150 impedance, 20 Hz to 20 kHz 60 dB (max) gain: 40 dB gain: Equivalent Input Noise (EIN), mic input at insert, 50 impedance, A-weighted 60 dB (max) gain: 40 dB gain: source –127 dBu –126.5 dBu source @1 kHz Main Mix knob down –85 dBu Channel Alt/Mute switch engaged –95 dBu Channel Level knob down –95 dBu –130.5 dBu –130 dBu Output Noise Figure (1/4" Main out, all channels assigned to main, Gain knobs at unity, 20 Hz to 30 kHz) Main Mix knob down, channel Level knobs down: –102 dBu (–106 dB SNR, ref +4 dBu) Main Mix knob unity, channel Level knobs down: –96 dBu (–100 dB SNR, ref +4 dBu) Main Mix knob unity, channel Level knobs unity: –93 dBu (–97 dB SNR, ref +4 dBu) Common Mode Rejection Ratio (CMRR) FireWire Through (Record + Playback) Dynamic Range: (0 dBu in, mic input to FireWire send, returned to Control Room, all gain stages at unity, 20 Hz to 20 kHz) 44.1 kHz sample rate: –104 dB 96 kHz sample rate: –106.5 dB Mic input, gain at max (60 dB) –38 dBu Line input, gain at –20 dB +22 dBu Instrument input, gain at –20 dB +22 dBu Tape input +12 dBu Aux return +22 dBu Mic input to insert, max gain, 1 kHz –70 dB Maximum Input Levels Mic input, gain at min (0 dB) +22 dBu Frequency Response Mic input to any output (all gain stages at unity, +0 / –0.5 dB) 20 Hz to 20 kHz Stereo channel line input to any output (all gain stages at unity, +0 / –0.5 dB) 20 Hz to 20 kHz FireWire in and out (mic input to FireWire send, returned to Control Room, all gain stages at unity): 44.1 kHz sample rate (+0 / –0.5 dB) 20 Hz to 20 kHz –3 dB at 21 kHz 96 kHz sample rate (+0 / –0.5 dB) 20 Hz to 20 kHz –3 dB at 45 kHz Distortion (THD+N) (20 Hz to 20 kHz bandwidth) Mic input at insert (+4 dBu in, 0 dB gain, +4 dBu out) Maximum Output Levels All outputs +22 dBu Equalization Mono Channels Low Mid frequency Mid gain High ±15 dB @ 80 Hz 100 Hz to 8 kHz ±15 dB ±15 dB @ 12 kHz Stereo Channels Low Mid High ±15 dB @ 80 Hz ±15 dB @ 2.5 kHz ±15 dB @ 12 kHz 0.0015% Mic input at insert (–36 dBu in, +40 dB gain, +4 dBu out) 0.017% Stereo channel line input to any output (+4 dBu in, all gain stages at unity, +4 dBu out) 0.005% FireWire in and out (+4 dBu in, mic input to FireWire send, returned to Control Room, all gain stages at unity) 44.1 kHz sample rate: 0.01%, 20 Hz to 2 kHz 0.02%, 2 kHz to 20 kHz 96 kHz sample rate: 0.01%, 10 Hz to 1 kHz 0.03%, 1 kHz to 47 kHz FireWire Sample Rates Available 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Buffer Size 32 (44.1 kHz and 48 kHz only), 64, 128, 256, 512, 1024, 2048 samples Resolution 24-bit 2/7 PAGES Onyx 1220i PREMIUM PRODUCTION MIXER WITH FIREWIRE Onyx 1220i SPECIFICATIONS continued... Meters 2-segment pre-fader channel meters 12-segment pre-fader Control Room meters Physical Properties (packaged product) OL (+18 dBu), –20 dBu OL (+20 dBu), +15, +10, +6, +3, 0, –2, –4, –7, –10, –20, –30 (0 dB = 0 dBu) Height 7.5 in / 191 mm Width 16.0 in / 406 mm Depth 19.0 in / 483 mm Shipping Weight 15.7 lb / 7.1 kg Input Impedance Mic input 2.8 k balanced Hi-Z input 1M Mono channel line input 30 k balanced 15 k unbalanced Stereo channel line input 20 k balanced 10 k unbalanced unbalanced Phones output All other outputs Height 3.85 in / 96 mm Width 12.25 in / 310 mm Depth 16.75 in / 420 mm Net Weight 13.5 lb / 6.1 kg Options Output Impedance Main XLR output Physical Properties (product) 100 balanced 75 Rackmount Kit Mixer Bag 0031910-00 0032344 300 Ordering Information AC Power Requirements Power Consumption Universal AC Power Supply Operating Temperature 30 watts 100 – 240 VAC, 50 – 60 Hz Onyx 1220i 12-Channel Premium Mixer with FireWire, US P/N 0030516-00 Onyx 1220i 12-Channel Premium Mixer with FireWire, EU P/N 0030516-01 0˚ – 40˚C 32˚ – 104˚F 3/7 PAGES Onyx 1220i PREMIUM PRODUCTION MIXER WITH FIREWIRE Onyx 1220i DIMENSIONS 1. WEIGHT APPROX. 13.5 lb [6.1 kg]. 2. SHIPPING WEIGHT APPROX. 15.7 lb [7.1 kg]. 3.85 [96] 3.85 [96] 48V 48V 48V 48V 16.75 [420] MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE OL OL OL OL OL OL OL OL 20 20 20 20 20 20 20 20 SOLO SOLO SOLO SOLO SOLO SOLO SOLO SOLO 12.25 [310] 48V 48V 48V 1.9 [47.7] 48V 16.1 [408.7] MUTE SOLO MUTE MUTE MUTE MUTE MUTE MUTE MUTE OL OL OL OL OL OL OL OL 20 20 20 20 20 20 20 20 SOLO SOLO SOLO SOLO SOLO SOLO SOLO 19.0 [482.6] 4/7 PAGES 48V Line FW Line Hi-Z 75Hz Bypass Low Cut HPF -20 ~ +20dB Gain (Ch.11-12 only) - + Mic: 0 ~ +60dB Line: -20 ~ +40dB Gain - + Insert 80 LO 80 LO HI Level To FW To FW 12K HI 12K FW Tap Pre Post 2.5K MID 2.5K MID Mod Pt Pre Post HI 12K Mod Pt Talkback Mod Pt PK -20 To FW 80 FW Tap 3-Band EQ Mod Pt MID 100~8K LO 3-Band EQ Mod Pt Level PK -20 to Main L/R to Aux1 to Aux1-2 Talkback Assign to Phones Level Level Solo Pan Solo Mod Pt Main L/R Alt 3/4 Main L/R Alt 3/4 Aux Sends Level Pan SoloLogic Solo(PFL) Aux 2 (post) Aux 2 (pre) Aux 1 (post) Aux 1 (pre) R/4 Alt L/3 R Main L NOTE: Switches are shown in the default (out) position. NOTE: Modifications (marked MOD above) must be undertaken by authorized LOUD service centers only Internal Talkback mic R Aux Return 2 Phantom pre post Aux 2 pre post Aux 1 Solo sum Aux 2 sum C/R Source Alt3/4 FW 1-2 to Ch 11-12 off Aux 2 level Aux 1 level C/R to Main Main CD/Tape Main level Aux 1 sum L CD/Tape in R Alt R/4 sum Alt L/3 sum R sum L sum C/R dim Meter Channel 1-12 direct outs off Firewire1-2 to C/R Solo logic C/R R C/R L RUDE SOLO LED +4dBu Mic level FW 13-14 FW 1-12 FW 15-16 Control Room level Firewire outputs Phones level Tape Aux 2 Out Aux 1 Out Firewire I/O Phones R L Control Room Out Left/3 Alt out Right/4 Tape Right Bal/Unbal Bal Main Out Bal/Unbal Left Bal Onyx 1220i BLOCK DIAGRAM L R Aux Return 1 L (Ch.11-12 only) Input from FW 2 ret Stereo Channels 5-12 R L (Ch.11-12 only) Input from FW 1 ret Ch 1-2 Line Hi-Z Mic Line Mic Mono Channels 1-4 Onyx 1220i PREMIUM PRODUCTION MIXER WITH FIREWIRE SoloLogic Solo(PFL) Aux 2 (post) Aux 2 (pre) Aux 1 (post) Aux 1 (pre) R/4 L/3 Alt R Main L 5/7 PAGES Onyx 1220i ( PRE-FADER / PRE EQ MAIN OUT FIREWIRE AUX SEND 1 BALANCED POWER R 2 1 ON ON 3 YX MIC PRE ON 4 YX MIC PRE ON AUX RETURN L BAL/UNBAL R 2 R 1 1 L + 4dB MAIN OUTPUT LEVEL 2 YX MIC PRE PREMIUM PRODUCTION MIXER WITH FIREWIRE L BAL/UNBAL Onyx 1220i FRONT PANEL TIP SEND / RING RETURN ) CHANNEL INSERT 2 3 4 MIC ALT 3-4 OUT MAIN OUT CTRL - RM OUT BAL/UNBAL BAL/UNBAL TAPE BAL/UNBAL L YX MIC PRE IN L R LINE IN 5-6 1 2 L L L/3 LINE LINE (MONO) (MONO) (MONO) (MONO) BAL/UNBAL BAL/UNBAL BAL/UNBAL BAL/UNBAL BAL/UNBAL BAL/UNBAL LINE HI-Z 30 40 75Hz 18dB/OCT 20 U 40 20 U 40 20 U 30 U R R U U PREMIUM FIREWIRE RECORDING MIXER CTRL ROOM/PHONES SOURCE U 40 GAIN 60 U -20dB +40dB R 48V 30 GAIN 60 U -20dB +40dB R 48V 30 GAIN 60 U -20dB +40dB 75Hz 18dB/OCT GAIN 60 U -20dB +40dB GAIN -20dB GAIN -20dB +20dB GAIN -20dB +20dB 0dB=0dBu L GAIN -20dB +20dB R L L LINE BAL/UNBAL 48V R/4 LINE IN 11-12 LINE LINE HI-Z U 4 R LINE IN 9-10 BAL/UNBAL 48V 20 3 L LINE IN 7-8 OUT SEND SEND PRE POST PRE POST EQ U -15 +15 1k 1k 8k 8k -15 -15 +15 U OO MAX OO MAX +15 -15 +15 -15 U MID +15 -15 U U 80Hz 80Hz +15 80Hz -15 +15 80Hz -15 +15 80Hz -15 +15 AUX 1 1 1 1 1 1 1 1 OO MAX PAN R OO MAX 2 PAN L R OO MAX 2 R MAX OO MAX 2 PAN L OO R MAX OO MAX 2 PAN L OO R MAX OO MAX 2 PAN L OO L R OO MAX OO MAX 2 PAN R RETURN SEND 1 PRE POST OO +15 PRE POST OO +15 2 PAN L AUX MASTER +15 AUX MAX RUDE SOLO PHONES 80Hz -15 AUX OO MAX OO LOW AUX MAX MAX CONTROL ROOM LOW AUX OO 30 +15 -15 U LOW 20 2.5kHz U LOW 10 ASSIGN TO MAIN MIX MID 2.5kHz OO LOW -15 U MID 2.5kHz AUX 2 L U MID U +15 LEVEL SET 4 AUX MAX 2 ALT 3-4 +15 -15 AUX OO FW 1-2 12kHz +15 LOW -15 U 2.5kHz MID U +15 +15 -15 3 0 HIGH 12kHz 7 8k -15 +15 80Hz -15 +15 -15 U LOW 80Hz +15 -15 FREQ 100 MID -15 +15 LOW +15 8k U MID U -15 FREQ 100 U MID +15 U HIGH 12kHz TAPE LINE FW 1-2 1k FREQ 100 U -15 +15 1k FREQ 100 -15 +15 10 6 EQ U HIGH 12kHz INPUT PRE POST EQ U HIGH 12kHz SEND PRE POST EQ U HIGH 12kHz SEND PRE POST EQ U HIGH 12kHz SEND PRE POST EQ U HIGH 12kHz SEND PRE POST EQ U HIGH -15 SEND CLIP 15 MAIN MIX SEND R 20 +20dB 1 RTN TO AUX1 OO +10 OO +10 2 2 PAN L POWER R MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE ALT 3/4 ALT 3/4 ALT 3/4 ALT 3/4 ALT 3/4 ALT 3/4 ALT 3/4 ALT 3/4 MIC dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 dB 10 5 5 5 5 5 5 5 5 5 U U U U U U U U U 5 OL - 20 5 OL - 20 5 OL - 20 5 OL - 20 OL 5 OL 5 - 20 - 20 5 OL - 20 5 10 10 10 10 10 10 10 10 20 20 20 20 20 20 20 20 30 30 30 30 30 30 30 30 40 50 60 40 50 60 40 50 60 40 50 60 40 50 60 40 50 60 40 50 60 40 50 60 OO OO OO OO OO OO OO OO dB 10 OL - 20 OO MAX 5 LEVEL 10 DESTINATION 20 30 PHONES AUX 1-2 40 50 60 OO TALKBACK SOLO SOLO 1 SOLO 2 SOLO 3 SOLO 4 SOLO 5-6 SOLO 7-8 SOLO 9-10 11-12 TALKBACK MAIN MIX 6/7 PAGES Onyx 1220i PREMIUM PRODUCTION MIXER WITH FIREWIRE Onyx 1220i REAR PANEL ( PRE-FADER / PRE EQ MAIN OUT FIREWIRE AUX SEND 1 BALANCED POWER R 2 1 2 ON 3 YX MIC PRE ON 4 YX MIC PRE ON AUX RETURN L BAL/UNBAL R 2 R 1 L + 4dB MAIN OUTPUT LEVEL YX MIC PRE 1 L BAL/UNBAL ON TIP SEND / RING RETURN ) CHANNEL INSERT 2 3 4 MIC ALT 3-4 OUT MAIN OUT CTRL - RM OUT BAL/UNBAL BAL/UNBAL TAPE BAL/UNBAL L YX MIC PRE IN L R LINE IN 5-6 1 2 L LINE IN 9-10 L L/3 LINE LINE (MONO) (MONO) (MONO) (MONO) BAL/UNBAL BAL/UNBAL BAL/UNBAL BAL/UNBAL BAL/UNBAL BAL/UNBAL 30 40 20 U 75Hz 18dB/OCT 40 20 U 40 20 U 30 R R PREMIUM FIREWIRE RECORDING MIXER U U U CTRL ROOM/PHONES SOURCE U 40 GAIN 60 U -20dB +40dB R 48V 30 GAIN 60 U -20dB +40dB R 48V 30 GAIN 60 U -20dB +40dB 75Hz 18dB/OCT 48V GAIN 60 U -20dB +40dB GAIN -20dB GAIN -20dB +20dB GAIN -20dB +20dB 0dB=0dBu L GAIN -20dB +20dB R L L LINE BAL/UNBAL LINE HI-Z OUT R/4 LINE IN 11-12 LINE 48V U 4 LINE IN 7-8 R BAL/UNBAL LINE HI-Z 20 3 L SEND SEND PRE POST PRE POST EQ U 1k 1k 1k FREQ 100 8k 8k U 2 OO MAX 2 OO MAX PAN L MAX R OO MAX R R MAX ALT 3/4 Part No. SW0885 Rev. A 06/11 ALT 3/4 MAX R MAX R MUTE dB 10 dB 10 dB 10 dB 10 5 5 5 5 5 5 10 OL - 20 U 5 10 OL - 20 U 5 10 OL - 20 U 5 10 OL - 20 U 5 10 +15 MAX OO RUDE SOLO PHONES LOW 80Hz -15 MAX CONTROL ROOM U 80Hz -15 AUX MASTER +15 Electronic files for this at: RETURN SEND are available AUX AUX AUX product www.mackie.com 1 1 1 1 1 Specification Sheet OO MAX OO MAX OO MAX PAN PRE POST MAX 2 2 Owner’s Manual OO +15 2 OO PRE POST MAX PAN RTN TO AUX1 OO OO +15 +10 Onyx1220i_SS.PDF 2 Onyx1220i_OM.PDF 2 OO +10 PAN Since we are always striving to make our products better by POWER incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice. “Mackie” and the “Running Man” figure are registered trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered MUTE MUTE MUTE trademarks of their respective holders, and are hereby acknowledged. L ALT 3/4 dB 10 U MAX OO PAN L ALT 3/4 OO 2 OO www.mackie.com 16220 Wood-Red Road NE Woodinville, WA 98072 USA MUTE MUTE MUTE MUTE 800-898-3211, Fax 425-487-4337, [email protected] ALT 3/4 30 +15 -15 LOW 80Hz +15 20 2.5kHz U -15 1 OO PAN L +15 -15 LOW AUX 2 PAN L +15 1 OO +15 -15 80Hz -15 MAX 2 PAN L +15 LEVEL SET 10 ASSIGN TO MAIN MIX MID 2.5kHz U AUX OO U MID 2.5kHz LOW 80Hz -15 U MID U 1 OO 2 ALT 3-4 4 OO LOW AUX 1 MAX FW 1-2 12kHz +15 -15 +15 80Hz +15 +15 -15 U AUX OO U MID 2.5kHz LOW -15 +15 1 MAX -15 +15 80Hz -15 +15 U 8k MID U LOW AUX OO -15 +15 80Hz -15 FREQ 100 MID U LOW 12kHz +15 -15 3 0 HIGH 7 U MID -15 +15 8k U MID -15 FREQ 100 U U HIGH 12kHz +15 -15 6 EQ U HIGH 12kHz +15 -15 10 TAPE LINE FW 1-2 1k FREQ 100 U +15 INPUT PRE POST EQ U HIGH 12kHz -15 +15 SEND PRE POST EQ U HIGH 12kHz -15 +15 SEND PRE POST EQ U HIGH 12kHz -15 SEND PRE POST EQ U HIGH 12kHz +15 SEND PRE POST EQ U HIGH -15 SEND CLIP 15 MAIN MIX SEND R 20 +20dB R L ALT 3/4 R L ALT 3/4 R ALT 3/4 ©2011 LOUD Technologies Inc. All MICRights Reserved. OL - 20 dB 10 dB 10 dB 10 5 5 5 U 5 10 OL - 20 U 5 10 OL - 20 U 5 dB 10 5 U OL - 20 OO MAX LEVEL 10 5 10 DESTINATION 7/7 PAGES
Similar documents
Onyx 820i
into channel for integration into mix ■ Built-in DI on first two channels for direct connection of guitars, bass, etc. ■ Individual 48V phantom power switches on all mic inputs ■ Tal...
More informationOnyx 1640i
main L/R and pre/post EQ assignment for all channels ■ 6 aux sends with pre/post assignment and solo ■ Smooth 60mm channel and master faders ■ Built-in DI on first two channels for direct conn...
More information