1/2 - Pan American Tool Corporation

NOVA® COMPACT PISTOL GRIP DRILL
311
COUNTERSINK CAGES • REVERSE SPOTFACERS • CARBIDE TIPPED
STOP COUNTERSINKS •HOLLOW CUTTERS • RIVET SHAVERS
COUNTERBORES • PAINT CUTTERS • COUNTERSINKS
PAN AMERICAN TOOL CORPORATION
5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 •TOLL FREE 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
2011
©2011 Pan American Tool Corporation
HIGH SPEED STEEL STOP COUNTERSINKS
Three Flute, Integral Pilot, 1/4-28 Threaded Shank, 100°
Countersink cutters may be used in all popular adjustable or micro-stop countersinking units utilizing a threaded shank
drive. Made from the finest high speed tool steel. Precision ground to exacting tolerances and form relieved to insure
concentricity of countersink angle.
5/16
TERMS AND CONDITIONS
TERMS: Net 10th and 25th.
DELIVERY: F.O.B. our plant, Fort Lauderdale, Florida
CREDIT: On application by rated companies. Visa, MasterCard, American Express,
Discover and IMPAC Cards accepted.
MINIMUM ORDER: Minimum order $50.00. All prices quoted in U.S. dollars.
Overseas shipments available. C.O.D. shipments plus $9.00.
WARRANTY: Pan American Tool Corporation tools are warranted against all defects in material or workmanship, when
used for the purpose for which the tool was designed.
CLAIMS: All claims must be made no later than 10 days after receipt of merchandise.
RETURNS: Any defective tool must be returned freight prepaid to Pan American Tool Corporation, and will be repaired,
replaced, or credited, provided it has not been
misused or abused in any manner.
WARNING: Always wear proper eye protection when working with any cutting tools.
TABLE OF CONTENTS
High Speed Steel Stop Countersinks ....................................................................................................................................3
High Speed Steel Stop Countersinks ....................................................................................................................................4
High Speed Steel Stop Countersinks ....................................................................................................................................5
High Speed Steel Stop Countersinks 82º & 120º .................................................................................................................6
Pilot Bonding Brushes ...........................................................................................................................................................6
Carbide Tipped Stop Countersinks with Integral Pilot ...........................................................................................................7
Carbide Tipped Stop Countersinks with Integral Pilot ...........................................................................................................8
Carbide Tipped Stop Countersinks with Replaceable Pilots .................................................................................................8
Pilots for Carbide Tipped Stop Countersinks ........................................................................................................................8
Solid Carbide Stop Countersinks - 100º ...............................................................................................................................9
Threaded Shank Chatterless Countersinks ........................................................................................................................10
High Speed Steel 6 Flute Chatterless Countersinks ...........................................................................................................10
High Speed Steel Hollow Cutters ........................................................................................................................................10
Rivet Shavers ......................................................................................................................................................................10
High Speed Steel Counterbores with 1/4 Shank................................................................................................................. 11
High Speed Steel Counterbores - No Radius ..................................................................................................................... 11
Counterbore Pilots...............................................................................................................................................................12
Reverse Spotfacers / Counterbores ....................................................................................................................................13
Plain Arbors for Reverse Spotfacers / Counterbores ..........................................................................................................13
Paint Cutters........................................................................................................................................................................14
Paint Cutter Arbor and Drill Extensions...............................................................................................................................14
Micro-Stop Countersink Cages ...........................................................................................................................................15
Micro-Stop Countersink Cages ...........................................................................................................................................16
Micro-Stop Countersink Cages Needle Bearing .................................................................................................................17
Nova® Compact Pistol Grip Drill ..........................................................................................................................................18
Nova®® 700 RPM High Torque Pistol Grip Drill .....................................................................................................................18
Nova Complete Motor Mounted Micro-Stop Cage .............................................................................................................19
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
2
www.panamericantool.com
3/8
PART
NUMBER
PILOT
SIZE
18-570
18-560
18-505
18-506
18-509
40
30
21
13
10
PART
NUMBER
PILOT
SIZE
27-435
27-201
27-221
27-202
27-203
27-218
27-211
27-204
27-205
27-206
27-207
27-208
27-212
27-209
27-210
27-215
27-439
27-216
27-213
3/32
40
1/8
30
27
26
5/32
21
20
19
16
13
3/16
12
10
8
7/32
“D"
1/4
DECIMAL
EQUIVALENT
INCHES
.0980
.1285
.1590
.1850
.1935
BODY
DIAMETER
INCHES
5/16
5/16
5/16
5/16
5/16
SHANK
SIZE
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$6.00
6.00
6.00
6.00
6.00
DECIMAL
EQUIVALENT
INCHES
.0938
.0980
.1250
.1285
.1440
.1470
.1562
.1590
.1610
.1660
.1770
.1850
.1875
.1890
.1935
.1990
.2187
.2460
.2500
BODY
DIAMETER
INCHES
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
SHANK
SIZE
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$5.35
5.35
5.35
5.35
5.35
6.35
5.35
5.35
5.35
6.35
5.35
5.35
5.35
5.35
5.35
6.35
6.35
6.35
5.35
OTHER SIZES AVAILABLE, PRICE ON APPLICATION
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
3
HIGH SPEED STEEL STOP COUNTERSINKS
HIGH SPEED STEEL STOP COUNTERSINKS
Three Flute, Integral Pilot, 1/4-28 Threaded Shank, 100°
Three Flute, Integral Pilot, 1/4-28 Threaded Shank, 100°
Countersink cutters may be used in all popular adjustable or micro-stop countersinking units utilizing a threaded shank
drive. Made from the finest high speed tool steel. Precision ground to exacting tolerances and form relieved to insure
concentricity of countersink angle.
Countersink cutters may be used in all popular adjustable or micro-stop countersinking units utilizing a threaded shank
drive. Made from the finest high speed tool steel. Precision ground to exacting tolerances and form relieved to insure
concentricity of countersink angle.
7/16
1/2
PART
NUMBER
PILOT
SIZE
27-222
27-226
27-233
27-227
27-236
27-235
27-228
27-234
27-237
27-232
27-225
27-224
27-229
27-199
27-230
27-231
3/32
40
1/8
30
27
5/32
21
19
13
3/16
12
11
10
"D"
1/4
5/16
PART
NUMBER
PILOT
SIZE
27-260
27-251
27-261
27-252
27-253
27-262
27-254
27-269
27-298
27-255
27-256
27-263
27-268
27-243
27-257
27-258
27-245
27-242
27-259
27-241
27-244
27-264
27-240
27-273
27-270
27-265
27-238
27-246
27-247
27-239
27-271
27-272
27-266
27-248
27-249
27-267
3/32
40
1/8
30
27
5/32
21
20
19
16
13
3/16
12
11
10
8
7
6
5
4
3
7/32
"A"
"B"
"D"
1/4
"F"
"G"
"J"
9/32
"N"
-5/16
"P"
"R"
3/8
DECIMAL
EQUIVALENT
INCHES
.0938
.0980
.1250
.1285
.1440
.1562
.1590
.1660
.1850
.1875
.1890
.1910
.1935
.2460
.2500
.3125
BODY
DIAMETER
INCHES
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
SHANK
SIZE
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$5.40
5.40
5.40
5.40
6.40
5.40
5.40
6.40
5.40
5.40
6.40
6.40
5.40
6.40
5.40
5.40
DECIMAL
EQUIVALENT
INCHES
.0938
.0980
.1250
.1285
.1440
.1562
.1590
.1610
.1660
.1770
.1850
.1875
.1890
.1910
.1935
.1990
.2010
.2040
.2055
.2090
.2130
.2188
.2340
.2380
.2460
.2500
.2570
.2610
.2770
.2812
.3020
.3090
.3125
.3230
.3390
.3750
BODY
DIAMETER
INCHES
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
SHANK
SIZE
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
6.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
6.50
5.50
5.50
6.50
5.50
5.50
6.50
6.50
5.50
5.50
6.50
5.50
6.50
6.50
6.50
6.50
5.50
6.50
6.50
5.50
9/16
5/8
3/4
PART
NUMBER
PILOT
SIZE
27-333
27-331
27-332
1/4
.390
.405
PART
NUMBER
PILOT
SIZE
27-276
27-277
27-275
27-278
27-284
27-283
27-279
27-285
27-280
27-292
27-294
27-286
27-281
27-287
27-293
27-288
27-297
27-289
27-282
27-290
40
30
27
21
13
3/16
10
"D"
1/4
"G"
"J"
-5/16
-"R"
---3/8
"Y"
PART
NUMBER
PILOT
SIZE
27-313
27-309
27-301
27-310
27-311
27-312
27-314
3/16
10
"D"
1/4
5/16
3/8
7/16
DECIMAL
EQUIVALENT
INCHES
.2500
.3900
.4050
BODY
DIAMETER
INCHES
9/16
9/16
9/16
SHANK
SIZE
DECIMAL
EQUIVALENT
INCHES
.0980
.1285
.1440
.1590
.1850
.1875
.1935
.2460
.2500
.2610
.2770
.3090
.3125
.3250
.3390
.3450
.3610
.3710
.3750
.4040
BODY
DIAMETER
INCHES
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
SHANK
SIZE
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
8.50
8.50
9.50
8.50
9.50
8.50
8.50
8.50
8.50
8.50
9.50
8.50
8.50
9.50
9.50
9.50
9.50
9.50
8.50
9.50
DECIMAL
EQUIVALENT
INCHES
.1875
.1935
.2460
.2500
.3125
.3750
.4375
BODY
DIAMETER
INCHES
3/4
3/4
3/4
3/4
3/4
3/4
3/4
SHANK
SIZE
UNIT
PRICE
3/8-24
3/8-24
3/8-24
3/8-24
3/8-24
3/8-24
3/8-24
22.00
22.00
21.00
21.00
21.00
21.00
21.00
1/4-28
1/4-28
1/4-28
UNIT
PRICE
$11.00
11.00
11.00
OTHER SIZES AVAILABLE, PRICE ON APPLICATION
OTHER SIZES AVAILABLE, PRICE ON APPLICATION
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
4
www.panamericantool.com
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
5
HIGH SPEED STEEL STOP COUNTERSINKS 82º & 120°
CARBIDE TIPPED STOP COUNTERSINKS WITH INTEGRAL PILOT
Three Flute, Integral Pilot, 1/4-28 Threaded Shank, 82°
100° Countersink Angle, 2 Flute Integral Pilot, 1/4-28 Threaded Shank
Countersink cutters may be used in all popular adjustable or micro-stop countersinking units utilizing a threaded shank
drive. Made from the finest high speed tool steel. Precision ground to exacting tolerances and form relieved to insure
concentricity of countersink angle.
Carbide tipped countersinks are designed for cutting highly abrasive materials such as composites and difficult to machine
materials where longer tool life is desired. The tool body is made of high-speed steel.
3/8
82º
1/2
120º
1/2
PART
NUMBER
PILOT
SIZE
18-038
18-042
18-021
18-043
18-045
18-048
18-044
18-027
#40
#30
#27
#21
3/16
#13
#10
1/4
PART
NUMBER
PILOT
SIZE
18-049
18-050
18-051
18-052
18-053
#40
#30
#21
#10
1/4
DECIMAL
EQUIVALENT
INCHES
.0980
.1280
.1440
.1590
.1875
.1850
.1935
.2500
BODY
DIAMETER
INCHES
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
SHANK
SIZE
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
DECIMAL
EQUIVALENT
INCHES
.0980
.1280
.1590
.1935
.2500
BODY
DIAMETER
INCHES
1/2
1/2
1/2
1/2
1/2
SHANK
SIZE
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$7.95
7.95
7.95
7.95
7.95
PILOT BONDING BRUSHES
Pilot bonding brushes are used for removing paint, primer and rust from around bolt or rivet holes.
PART
NUMBER
BODY
SIZE
32-001
32-002
32-003
32-004
32-005
1/2
1/2
1/2
1/2
1/2
PILOT
SIZE
3/32 (#40)
1/8 (#30)
5/32 (#21)
3/16 (#10)
1/4
PILOT
DIAMETER
UNIT
PRICE
.0938
.1250
.1562
.1875
.2500
$14.95
14.95
14.95
14.95
14.95
.005 Stainless Wire Brush Material
MFS = 20,000 RPM
OTHER SIZES AVAILABLE ON REQUEST
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
6
www.panamericantool.com
1/2
PART
NUMBER
PILOT
SIZE
36-542
36-548
36-545
36-543
36-546
36-547
36-541
36-544
36-549
36-550
36-551
36-540
36-552
3/32
#40
1/8
#30
#27
5/32
#21
#20
#16
#13
3/16
#10
1/4
PART
NUMBER
PILOT
SIZE
36-909
36-453
36-556
36-452
36-503
36-553
36-557
36-451
36-502
36-554
36-539
36-789
36-450
36-449
36-448
36-558
36-555
36-501
36-447
36-559
36-560
36-561
36-562
3/32
#40
1/8
#30
#27
5/32
#21
#20
#16
#13
3/16
#12
#11
#10
#8
#7
#6
#5
7/32
"D"
1/4
"G"
5/16
DECIMAL
EQUIVALENT
INCHES
.0938
.0980
.1250
.1280
.1440
.1560
.1590
.1610
.1770
.1850
.1875
.1930
.2500
BODY
DIAMETER
INCHES
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
SHANK
SIZE
DECIMAL
EQUIVALENT
INCHES
.0938
.0980
.1250
.1280
.1440
.1560
.1590
.1610
.1770
.1850
.1875
.1890
.1910
.1930
.1990
.2010
.2040
.2050
.2180
.2460
.2500
.2610
.3125
BODY
DIAMETER
INCHES
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
SHANK
SIZE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
UNIT
PRICE
$25.50
25.50
25.50
25.50
25.50
25.50
25.50
25.50
25.50
25.50
25.50
25.50
25.50
UNIT
PRICE
$26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
26.00
OTHER SIZES AVAILABLE, PRICE ON APPLICATION
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
7
CARBIDE TIPPED STOP COUNTERSINKS WITH INTEGRAL PILOT
SOLID CARBIDE STOP COUNTERSINKS - 100º
100° Countersink Angle, 2 Flute Integral Pilot, 1/4-28 Threaded Shank
Solid Carbide Head Welded to a Steel 1/4-28 Threaded Shank
Carbide tipped countersinks are designed for cutting highly abrasive materials such as composites and
difficult to machine materials where longer tool life is desired. The tool body is made of high-speed steel.
Three flute design gives excellent wear resistance to highly abrasive materials and difficult
to machine materials. Precision ground for concentricity.
5/8
PART
NUMBER
PILOT
SIZE
36-563
36-564
36-565
36-567
36-568
36-569
36-570
36-566
#40
#30
#21
"D"
1/4
"G"
5/16
#10
DECIMAL
EQUIVALENT
INCHES
.0980
.1280
.1590
.2460
.2500
.2610
.3125
.1930
BODY
DIAMETER
INCHES
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
SHANK
SIZE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
UNIT
PRICE
$31.95
31.95
31.95
31.95
31.95
31.95
31.95
31.95
3/8
CARBIDE TIPPED STOP COUNTERSINKS WITH REPLACEABLE PILOTS
100° Countersink Angle, Replaceable Pilot, 1/4-28 Threaded Shank
Carbide tipped countersinks are designed for cutting highly abrasive materials such as composites and difficult to
machine materials where longer tool life is desired. Replaceable pilot construction allows for replacement of
damaged pilots and substitution of various pilot diameters with the same countersink.
BODY
DIAMETER
PILOT
HOLE
NUMBER
OF FLUTES
SHANK
SIZE
UNIT
PRICE
15-001
15-002
1/2
5/8
3/32
1/8
2
2
1/4-28
1/4-28
$35.95
36.95
These pilots are designed for use with the carbide tipped countersinks listed above. Made from the finest quality
tool steel, heat treated and precision ground to exacting size and concentricity.
PART
NUMBER
SHANK
DIAMETER
PILOT
SIZE
UNIT
PRICE
15-102
15-103
15-104
15-105
15-106
15-112
15-123
15-126
15-127
15-107
15-108
15-109
15-110
15-111
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
#30
#21
#10
#12
1/4
#13
“D"
“G"
#8
#30
#21
#12
#10
1/4
$8.00
8.00
8.00
8.00
8.00
8.00
12.50
12.50
8.00
5.00
8.00
8.00
8.00
8.00
PILOT
SIZE
36-700
36-701
36-702
36-703
36-704
#40
#30
#21
#20
#10
DECIMAL
EQUIVALENT
INCHES
.0900
.1285
.1850
.1610
.1935
BODY
DIAMETER
INCHES
3/8
3/8
3/8
3/8
3/8
SHANK
SIZE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
UNIT
PRICE
$44.50
44.50
44.50
44.50
44.50
OTHER SIZES AVAILABLE, PRICE ON APPLICATION
PART
NUMBER
PILOTS FOR CARBIDE TIPPED STOP COUNTERSINKS
PART
NUMBER
1/2
PART
NUMBER
PILOT
SIZE
36-710
36-711
36-712
36-713
36-714
36-715
36-716
36-717
36-718
36-719
#40
1/8
#30
#21
#20
#13
3/16
#10
"D"
1/4
DECIMAL
EQUIVALENT
INCHES
.0980
.1250
.1285
.1850
.1610
.1850
.1875
.1935
.2460
.2500
BODY
DIAMETER
INCHES
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
SHANK
SIZE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
UNIT
PRICE
$49.50
49.50
49.50
49.50
49.50
49.50
49.50
49.50
49.50
49.50
OTHER SIZES AVAILABLE, PRICE ON APPLICATION
OTHER SIZES AVAILABLE, PRICE ON APPLICATION
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
8
www.panamericantool.com
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
9
THREADED SHANK CHATTERLESS COUNTERSINKS
PART
NUMBER
SIZE
SHANK
UNIT
PRICE
43-653
43-652
5/16" X 100˚
3/8" X 100˚
1/4-28
1/4-28
$13.75
17.50
HIGH SPEED STEEL COUNTERBORES WITH 1/4 SHANK
HIGH SPEED STEEL 6 FLUTE CHATTERLESS COUNTERSINKS
PART
NUMBER
SIZE
SHANK
DIAMETER
SHANK
LENGTH
OVERALL
LENGTH
UNIT
PRICE
33-503
33-504
33-505
33-506
33-507
33-508
33-510
33-511
33-512
33-513
1/4" X 100˚
5/16" X 100˚
3/8" X 100˚
1/2" X 100˚
5/8" X 100˚
3/4" X 100˚
1/4" X 82˚
5/16" X 82˚
3/8" X 82˚
1/2" X 82˚
1/4
1/4
1/4
1/4
3/8
3/8
1/4
1/4
1/4
1/4
1
1
1
1-1/8
1-5/16
1
1
1
2
2
2
2
2-1/2
2-3/4
2
2
2
2
$6.75
7.00
7.50
9.20
14.95
19.55
7.50
8.75
8.25
9.95
HIGH SPEED STEEL HOLLOW CUTTERS
Designed to fit standard stop countersinking units so that their cutting depth can be controlled. These tools are used for
collar removal on Hi-Shear® fasteners. New improved stronger 4 flute design for longer tool life.
PART
NUMBER
"D"
"A"
29-908X
29-909X
29-910X
29-911X
29-912X
29-913X
.375
.375
.438
.500
.562
.625
.1230
.1540
.1855
.2460
.3085
.3730
FASTENER FASTENER
SIZE
TYPE
1/8
5/32
3/16
1/4
5/16
3/8
Hi-Shear®
Hi-Shear®
Hi-Shear®
Hi-Shear®
Hi-Shear®
Hi-Shear®
UNIT
PRICE
1/4 - 28
Thread
$6.50
7.00
7.00
7.00
7.60
8.00
A
D
RIVET SHAVERS
30-601
30-602
30-603
30-604
30-605
30-606
5/16
3/8
7/16
1/2
9/16
5/8
SHANK
UNIT
PRICE
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$21.75
21.20
22.45
24.35
22.90
26.65
1/4 - 28
Thread
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
10
www.panamericantool.com
SIZE
PILOT
HOLE
18-200
18-201
18-202
18-203
18-204
18-205
18-206
18-207
18-208
18-209
18-210
18-211
18-212
18-213
18-214
18-215
18-216
18-217
18-218
18-219
18-220
18-221
18-222
18-223
18-224
18-225
18-226
18-227
18-228
18-229
1/4
9/32
5/16
11/32
3/8
13/32
7/16
29/64
15/32
1/2
17/32
9/16
19/32
5/8
21/32
11/16
23/32
3/4
25/32
13/16
27/32
7/8
29/32
15/16
31/32
1
1-1/16
1-1/8
1-3/16
1-1/4
3/32
3/32
3/32
3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
SHANK OVERALL
DIAMETER LENGTH
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-13/16
2-13/16
2-13/16
2-13/16
2-13/16
2-13/16
2-13/16
2-13/16
2-13/16
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
2-3/4
2-3/4
2-3/4
2-3/4
FLUTE
LENGTH
UNIT
PRICE
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
3/4
3/4
3/4
3/4
$13.70
13.95
14.20
14.35
14.65
15.00
15.00
16.65
15.15
15.35
16.35
17.10
19.60
18.95
21.25
21.10
30.20
22.15
25.00
24.00
29.70
24.35
31.15
25.85
36.40
32.40
47.65
50.80
51.90
54.65
SUPPLIED WITH .032 RADIUS
2 Flute Carbide Tipped For Long Cutting Life
PART
BODY
NUMBER DIAMETER
PART
NUMBER
HIGH SPEED STEEL COUNTERBORES - NO RADIUS
PART
NUMBER
SIZE
PILOT
HOLE
OVERALL
LENGTH
FLUTE
LENGTH
UNIT
PRICE
18-207SQ
18-211SQ
29/64
9/16
1/8
1/8
2-13/16
2-13/16
5/8
5/8
$16.65
17.10
SUPPLIED WITH NO RADIUS
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
11
COUNTERBORE PILOTS
REVERSE SPOTFACERS / COUNTERBORES
Pilots for interchangeable Pilot Counterbores.
High Speed Reverse Spotfacers
Reverse spotfacers are designed for use in restricted areas where conventional spotfacers cannot be used.
All cutters furnished standard with 1/32" corner radius.
PART
NUMBER
PILOT
HEAD
DECIMAL
SHANK
UNIT
PRICE
18-419
18-701
18-708
18-418
18-420
18-404
18-403
18-714
18-740
18-739
18-406
36-160
18-703
18-703A
18-715
18-703B
18-702
18-702A
18-704
18-718
18-705
18-705A
18-716
18-719
18-744
18-414
18-720
18-706
18-707A
18-721
18-416
34-941
33-110
18-417
18-722
18-712
18-723
33-107
#40
1/8
1/8
#30
#30
5/32
5/32
5/32
#21
#20
#20
#13
3/16
3/16
3/16
3/16
#10
#10
7/32
7/32
1/4
1/4
1/4
1/4
"F"
9/32
9/32
5/16
5/16
5/16
5/16
3/8
3/8
3/8
7/16
7/16
1/2
1/2
.0980
.1250
.1250
.1285
.1285
.1562
.1562
.1562
.1590
.1610
.1610
.1850
.1875
.1875
.1875
.1875
.1935
.1935
.2188
.2188
.2500
.2500
.2500
.2500
.2570
.2812
.2812
.3125
.3125
.3125
.3125
.3750
.3750
.3750
.4375
.4375
.5000
.5000
3/32
3/32
1/8
3/32
1/8
3/32
1/8
5/32
1/8
3/32
1/8
1/8
3/32
1/8
5/32
3/16
3/32
1/8
3/32
3/16
3/32
1/8
5/32
3/16
1/8
1/8
5/32
3/32
1/8
5/32
3/16
1/8
5/32
3/16
1/8
3/16
1/8
3/16
$4.50
4.50
4.50
4.50
4.50
4.50
4.50
5.00
5.00
5.00
5.00
5.00
4.00
4.00
5.00
4.00
4.00
4.00
5.00
5.00
4.00
4.00
5.00
4.00
6.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
6.00
6.00
6.00
6.00
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
12
www.panamericantool.com
"D"
PART
CUTTER
NUMBER DIAMETER
26-101
1/4
26-102
1/4
26-103
5/16
26-104
5/16
26-105
5/16
26-106
3/8
18-603
3/8
26-107
3/8
26-108
7/16
26-133
7/16
26-109
7/16
26-110
1/2
26-111
1/2
26-112
9/16
26-113
9/16
18-605
5/8
26-114
5/8
26-115
5/8
26-116
5/8
26-117
11/16
26-118
11/16
26-119
3/4
26-120
3/4
26-131
3/4
18-756
13/16
18-113
7/8
26-121
7/8
26-122
1
26-123
1
"PH"
PILOT
HOLE
3/32
1/8
3/32
1/8
5/32
1/8
5/32
3/16
1/8
5/32
3/16
3/16
1/4
3/16
1/4
1/8
3/16
1/4
5/16
1/4
5/16
1/4
3/8
5/16
1/4
5/16
3/8
3/8
1/2
UNIT
PRICE
$16.25
16.25
10.00
16.25
16.25
16.30
16.30
16.30
17.15
17.15
17.15
17.85
17.85
18.30
18.30
10.00
20.85
20.85
20.85
22.10
22.10
28.00
28.00
28.00
10.00
40.15
40.15
46.00
46.00
PLAIN ARBORS FOR REVERSE SPOTFACERS / COUNTERBORES
Arbors For Use With Reverse Spotfacers / Countersinks
PART
PILOT
NUMBER DIAMETER
27-101
27-102
27-103
27-104
27-105
27-106
27-107
27-108
3/32
1/8
5/32
3/16
1/4
5/16
3/8
1/2
UNIT
PRICE
$6.00
6.25
6.50
7.00
7.25
8.25
13.35
20.25
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
13
PAINT CUTTERS
MICRO-STOP COUNTERSINK CAGES
Designed to help reduce paint from chipping during the screw removal process. The Paint Cutter is used to cut
a ring in the paint around the head of the screw, reducing the chance of excess paint chipping.
All Bronze Bearing Construction • .001 Increment Depth Adjustment • Positive Adjustment Lock
1 1/4 Capacity Countersink
Cage 3/8-24 Thread
Part #19-358
5 3/4"
Without Paint Cutter
With Paint Cutter
PART
NUMBER
"D"
"A"
SHANK
SIZE
UNIT
PRICE
36-511
36-512
36-513
36-514
36-517
#4 Paint Cutter
#6 Paint Cutter
#8 Paint Cutter
#10 Paint Cutter
1/4" Paint Cutter
.254
.280
.302
.360
.462
1/4-28
1/4-28
1/4-28
1/4-28
1/4-28
$14.00
14.00
14.00
14.00
14.00
PAINT CUTTER ARBOR AND DRILL EXTENSIONS
PART
NUMBER
LENGTH
INCHES
UNIT
PRICE
36-666
36-667
36-668
36-669
36-670
2-1/4
3
5
7
9
$4.00
4.50
5.00
5.50
6.00
• 1/4" Shaft Travel
• 1-1/4" Cutter Capacity
• 3/8" Diameter Chucking Shank
• 3/8-24 Threaded Shaft with
Polished Foot
• Rated at 3,000 RPM
• $55.00 Each
9/16 Capacity Countersink Cage
With Nylon Footpiece
Part #19-360
3.6"
Countersink Cage
Part #19-359
3.85"
9/16 Capacity Midget
Countersink Cage With Nylon
Footpiece
Part #19-370
3 1/8"
• 1/4" Diameter Chucking Shank
• 9/32" Shaft Travel
• 9/16" Cutter Capacity
• 1/4-28 Threaded Shaft
• Rated at 3,000 RPM
• $19.00 Each
Part #90-018 Replacement
Nylon Foot Piece
1.65"
Dual Threaded
PART
NUMBER
36-671
36-672
36-673
LENGTH
INCHES
1
2
4
3.8"
$6.00
6.50
7.00
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
14
Micro-Stop
Countersink Cage
Part #19-364
UNIT
PRICE
www.panamericantool.com
• Heavy Duty-rated up to
10,000 RPM
• Precision Twin Radial Ball
Bearing Construction
• Will fit any motor 3/8-24 spindle
• 9/32" Shaft Travel
• 5/8" Cutter Capacity
• 1/4-28 Threaded Shaft with
Polished Foot Piece
• $15.00 Each
• 1/4" Diameter Chucking Shank
• 9/32" Shaft Travel
• 7/16" Cutter Capacity
• 1/4-28 Threaded Shaft
• Nylon Threaded No-Mar Foot Piece
• Rated at 3,000 RPM
• $25.00 Each
Countersink Cage
Part #19-362
• $5.00 Each
These tools have a 1/4-28 threaded shank for insertion into a threaded shank pneumatic tool and
a 1/4-28 female thread to hold threaded shank tools.
• 1/4" Diameter Chucking Shank
• 9/32" Shaft Travel
• 5/8" Cutter Capacity
• 1/4-28 Threaded Shaft with
Polished Foot
• Rated at 3,000 RPM
• $15.00 Each
•
•
•
•
•
•
1/4-28 Threaded Shank
3/32" Shaft Travel
1/2" Cutter Capacity
1/4-28 Threaded Shaft
Rated at 3,000 RPM
$15.00 Each
1 3/8 Capacity Countersink
Cage 3/8-24 Thread
Part #19-368
6 1/8"
• 3/8" Diameter Chucking Shank
• 1/4" Shaft Travel
• 1-3/8" Cutter Capacity
• 3/8-24 Threaded Shaft with
Polished Foot
• Rated at 3,000 RPM
• $55.00 Each
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
15
MICRO-STOP COUNTERSINK CAGES
MICRO-STOP COUNTERSINK CAGES NEEDLE BEARING
All Bronze Bearing Construction • .001 Increment Depth Adjustment • Positive Adjustment Lock
4"
3.85"
5/8 Heavy Duty
Bearing Countersink
Cage
Part #19-363
4"
5/8 Heavy Duty
Bearing Countersink
Cage - Nylon Footpiece
Part #19-366
• 1/4" Diameter
Chucking Shank
• Precision Heavy
Duty Twin Radial Ball
Bearing Construction
• 9/32" Shaft Travel
• 5/8" Cutter Capacity
• 1/4-28 Threaded Shaft
with Polished Foot
• Rated at 10,000 RPM
• $25.00 Each
• 1/4" Diameter
Chucking Shank
• Precision Heavy
Duty Twin Radial Ball
Bearing Construction
• 9/32" Shaft Travel
• 5/8" Cutter Capacity
• 1/4-28 Threaded Shaft
• Rated at 10,000 RPM
• $30.00 Each
5/8 Capacity
Countersink Cage
Part #19-359
1/2 Capacity Midget
Countersink Cage
Part #19-361
• 1/4" Diameter
Chucking Shank
• 9/32" Shaft Travel
• 5/8" Cutter Capacity
• 1/4-28 Threaded Shaft
with Polished Foot
• Rated at 3,000 RPM
• $15.00 Each
3.32"
• 1/4" Diameter
Chucking Shank
• 9/32" Shaft Travel
• 1/2" Cutter Capacity
• 1/4-28 Threaded Shaft
with Polished Foot
• Rated at 3,000 RPM
• $20.00 Each
Needle Bearing Micro-Stop
Countersink Cage
Part #19-367
3-9/16"
• 1/4" Diameter
Chucking Shank
• 9/32" Shaft Travel
• 5/8" Cutter Capacity
• 1/4-28 Threaded Shaft
with Polished Foot
• Rated at 10,000 RPM
• $25.00 Each
Needle Bearing Micro-Stop
Countersink Cage
Part #19-365
3-5/8"
• 1/4" Diameter
Chucking Shank
• 9/32" Shaft Travel
• 9/16" Cutter Capacity
• 1/4-28 Threaded Shaft
• Rated at 10,000 RPM
• Nylon Threaded
No-Mar Foot Piece
• $31.00 Each
Part #19-370
With Nylon Foot Piece
• $25.00 Each
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
16
www.panamericantool.com
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
17
NOVA® COMPACT PISTOL GRIP DRILL
NOVA® COMPLETE MOTOR MOUNTED MICRO-STOP CAGE
2600, 3200, or 4000 RPM
5 1/2"
• Feathering Trigger Allows Operator
Complete Control of Drilling Speed
• 360° Rotatable Exhaust
• Smooth Quiet Operation
• Rubber Grip for Operator Comfort
• One Year Warranty
7 3/4"
1 1/4"
1 1/8"
4 3/4"
Part #60-300
2600 RPM with 1/4" Chuck and Key
1.5 Lbs.
$113.00 Each
Part #60-310B
4000 RPM with Keyless 1/4" Chuck
1.9 Lbs.
$135.00 Each
Part #60-300B
2600 RPM with Keyless 1/4" Chuck
1.9 Lbs.
$135.00 Each
Part #60-312
3200 RPM with 1/4" Chuck and Key
1.5 Lbs.
$113.00 Each
Part #60-310
4000 RPM with 1/4" Chuck and Key
1.5 Lbs.
$113.00 Each
Part #60-312B
3200 RPM with Keyless 1/4" Chuck
1.9 Lbs.
$135.00 Each
• 95 In.-Lbs. Torque at 700 RPM
• Feathering Trigger Allows Operator
Complete Control of Drilling Speed
• 360° Rotatable Exhaust
• Air Inlet 1/4-18 NPT
• Rubber Grip for Operator Comfort
• Smooth Quiet Operation
• One Year Warranty
3 7/8"
5 1/4"
Also Available With Nylon Foot Piece
• For Precision Depth Control
• Feathering Trigger Allows Operator Complete Control of Speed
• 360° Rotatable Exhaust
• Air Inlet 1/4-18 NPT
• Smooth Quiet Operation
• One Year Warranty
NOVA® 700 RPM HIGH TORQUE PISTOL GRIP DRILL
7"
1 3/8"
Part #19-369
2600 RPM Pistol Grip Drill
1.6 Lbs.
$153.00 Each
Part #19-369N - with Nylon Foot Piece
2600 RPM Pistol Grip Drill
1.6 Lbs.
$160.00 Each
Part #19-369A
3200 RPM Pistol Grip Drill
1.6 Lbs.
$153.00 Each
Part #19-369AN - with Nylon Foot Piece
3200 RPM Pistol Grip Drill
1.6 Lbs.
$160.00 Each
Part #19-369B
4000 RPM Pistol Grip Drill
1.6 Lbs.
$153.00 Each
Part #19-369BN - with Nylon Foot Piece
4000 RPM Pistol Grip Drill
1.6 Lbs.
$160.00 Each
5"
Part #60-008B
Standard with Compact 3/8 Chuck and Key
2.55 Lbs.
$185.00 Each
Part #60-008K
With Keyless 3/8" Capacity Chuck
2.9 Lbs.
$235.00 Each
Part #60-008H
With Keyless 1/4" Capacity Chuck
2.6 Lbs.
$215.00 Each
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
18
2600, 3200 or 4000 RPM
www.panamericantool.com
PA N A M E R I C A N T O O L C O R P O R AT I O N
5990 NW 31st Avenue • Ft. Lauderdale, Florida 33309-2208
PHONE (954)735-8665 or 1-800-423-2764 • FAX (954)735-8668
www.panamericantool.com
19