THE COLIBRI GROUP I GROUP

650-Ton Ferrara Mdl.
HY650T-S-US Hydraulic
Coining Press
AUCTION SALE
Machinery and Equipment of a Major Giftware/ Jewelry Manufacturer
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 13%
Buyer’s Premium. A minimum deposit of 25% on all lots purchased is required at the
time of sale in cash, certified or cashier’s check. Company or personal checks will
be accepted only if accompanied by a letter from the payor’s bank guaranteeing
unqualified payment to Koster Industries Inc. All checks must be made payable to
the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster
Industries Inc. on balances due will be accepted with prior arrangement. No lot may
be removed until complete settlement is made.
Machinery and Equipment
of a Major Giftware/
Jewelry Manufacturer
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
By Order of: Allan M Shine, Esq.
Receiver Winograd, Shine & Zacks, P.C.
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
sale Date: Thursday, April 16th, 2009 at 10:30 a.m.
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Assorted Stainless & Poly Tanks
PTI-Solco Walk Thru Metal Detector
Presorted
First-Class Mail
U.S. Postage
[3] Astle Stainless Steel Heated
Wash Units
PAID
Minneapolis, MN
Permit #3723
Inspection Dates: Wednesday, April 15th from 8:00 a.m. to 4:00 p.m. and morning of sale
1 of 10 s
as new a
2008
40HP Gardner Denver Mdl. EDE99M Air Compressor
2007
AXP/9030749
Contenti ASEG Galloni Mdl. VCM
Vacuum Casting Machine
AUCTION SALE
Waste Treatment Area
AIR COMPRESSORS
Gardner Denver Mdl. EDE99M 40HP Air
Compressor, 125-psig, S/N: S111337
[2] Torit Mdl. 20-5-FB-55 4-Bag Dust
Collectors
AAF Size 12 Type D Roto-Clone Dust
Collector
[5] Reach-In Type Shot Blast Cabinets
CMI Save Time 2000 Series Bio Scan II
Time Clock System
[2] AAF Arestall Dust Collectors
Electronic Bonding Inc. Mdl. 7000A Mini
Fusion Welder, S/N: 73C-2
Hankison Mdl. 80170 Air Dryer
SAFES
MISCELLANEOUS
Air Receiving Tank
Meilink 2-Door Safe, Class A TR/TL
SECURITY EQUIPMENT
[4] Mosler 2-Door Safes, [3] Class A,
[1] Class 350
2000# Clark Mdl. TM12 Electric Forklift
Truck, with battery charger,
S/N: TM127-007-5015FA
Branson Series 8000 Ultrasonic
Generators
Vulcatrol Heated Platen Press
[3] Bench Mounted Power-Hone Honing
Machines
Gardner Denver 30HP Tank Mounted Air
Compressors
PTI-Solco Walk-Thru Metal Detector, with
computer & software for control purposes
[Note: unit less than 1 year old]
Heimann Systems X-Ray Unit, Belt
Conveyor
Security System Consisting of:
– [32] cameras (indoor & outdoor), most color
– monitors, DVR drive, internet access
DUST COLLECTORS
Torit Downflo Mdl. DFT3-18 Dust
Collector, with 18-filter cartridges,
vibrating, S/N: IG482517-001
[2] Acme 2-Door Safes
LARGE QUANTITY OF DIGITAL
BENCH SCALES, Including: Mettler
PE360, Mettler PC1350, Mettler PE24,
Mettler PE16, Sartorius, Sauter, S300
Pennsylvania, Setra Super Count High
Resolution Counting Scales
MISCELLANEOUS MACHINERY
[9] Joyal Bench Welders
SRA Portable Soldering Units
[3] Fusion Automatic Paste Applicators
Bench Mounted 5" Wide Hand Roll
Ariens ST928 Snow Blower
Coleman Powermate 10HP Portable
Generator
12" x 16-gauge Bench Shear
12" Nikon V-12 Optical Comparator,
S/N: 257056
10" Micro-Vu Optical Comparator
Lassy Hand Tapper
Presented By:
MISCELLANEOUS SHOP SUPPORT
Jewelers Benches, Lights, Hand Presses,
Scales, Soldering Units, Vidmar Tool
Cabinets, Pallet Racking, Adjustable Steel
Shelving, 2-Door Steel Storage Cabinets,
Jewelers Balls, Jewelers Tools, Flame Proof
Storage Cabinets, High Speed Drills, Bench
Grinders, Shop Furniture, Dell Optiplex
Computers, Etc.
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
Machinery and Equipment
of a Major Giftware/
Jewelry Manufacturer
5
SM Engineering Belt Furnace
By Order of: Allan M Shine, Esq.
Receiver Winograd, Shine & Zacks, P.C.
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
sale Date: Thursday, April 16th, 2009 at 10:30 a.m.
Inspection Dates: Wednesday, April 15th from 8:00 a.m. to 4:00 p.m. and morning of sale
Heimann Systems
X-Ray Unit
1987
Directions:
From Providence Airport (Points North):
Take Route 95 North
From Providence (Points South):
Take Route 95 South
Take Exit#16 RI 10 North Toward RI-1/
Cranston Street
Take Exit#16 RI Towards Cranston
Take the NIANTIC Avenue Exit toward/
Industrial Park/Cranston Street
Colibri is at the Foot of Exit – Corner Dupont
Drive @ 100 Niantic Avenue
Bear Left on Exit and go Straight through
Light onto DuPont Drive — Plant parking
on your right.
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
Link-O-Matics
Merge Onto RI 10 North Towards RI-2/
Resevoir Ave.
Take NIANTIC Avenue Exit toward/Industrial
Park/Cranston St.
Colibri is at the Foot of Exit – Corner Dupont
Drive @ 100 Niantic Avenue
Bear Left on Exit and go Straight through Light
onto DuPont Drive — Plant parking on your right.
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
800-Ton Ferrara Mdl. 800T-A-US Hydraulic
Coining Press
35-Ton Komatsu Mdl. OBS35-3 OBI Press,
S/N: 12174
Agie Elox Mondo CNC Wire EDM
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Presented By:
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
1 OF 2
1 OF 3
[3] CI Hayes Belt Furnaces
SM Engineering Belt Furnace
Charmilles D10 EDMs
16" x 30" Leblond Regal
Geared Head Engine Lathe
650-Ton Ferrara Mdl. HY650T-S-US
Hydraulic Coining Press
250-Ton CMC Hi-Ton Hydraulic
Coining Presses
45-Ton Diemaster OBI Press
20-Ton Perkins Mdl. 20C OBI Press,
S/N: 47332
Link-O-Matics
Type 4DA Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Drop Hammer
Nilson Vertical 4-Slide Machine
COINING PRESSES
45-Ton Diemaster Open Back Inclinable
Press, air clutch, bed area: 18" x 30" LR,
S/N: 450BI-25-2
800-Ton Ferrara Ndk, 800T-S-US Hydraulic
Coining Press, S/N: 129/97/2HP
650-Ton Ferrara Mdl. HY650T-S-US
Hydraulic Coining Press, S/N: 178/99/6HP
[2] 250-Ton CMC Hi-Ton Hydraulic
Coining Presses, S/N: 48015-1/043;
48025-1/056 [As Is]
PRESSES
35-Ton Komtasu Mdl. OBS35-3 Open
Back Inclinable Press, S/N: 12174, stroke:
3.15", shut height: 8.27", slide adjustment:
2.17", bed area: 27.5" x 15.75", 60-120
SPM, with ISB light curtains, load monitor,
Arc-Trol-1 ISB digital tool protection system,
[1987]
With BIDSPOTTER.COM you can bid on items in auctions from
anywhere in the world! To register to bid in this Koster Industries Inc.
auction, please visit us at www.bidspotter.com
[2] 10-Ton Perkins Mdl. 10C Open Back
Inclinable Presses, stroke: 1-1/2", slide
adjustment: 1-1/2", shut height: 5-3/4",
bed area: 8" x 13-1/2", S/Ns: 47321; 47320
Approx. 50-Ton V&O Open Back
Inclinable Press, 90 SPM, air clutch, bed
area: 30" x 24", S/N: 50-S-133
LARGE QUANTITY OF ADDITIONAL OBI
PRESSES, Including: 7S & 5S Standard
Transfer Presses, 8-Ton Alva Allen,
55A Famco, 3-Ton Perkins, No. 3 Rouselle,
5A Famco, 20C Bliss, No. 2 Federal,
[2] 18-Ton Niagaras
28-Ton Perkins Mdl. 3758 Open Back
Inclinable Press, stroke: 2", slide
adjustment: 2-1/2", shut height: 10", air
clutch, S/N: 35953
Hobbing
Clifton Hydraulic Hobbing Press, Mdl.
500H, 500-Ton, 4-1/2" stroke, 7500 PSI,
S/N: 0203
20-Ton Perkins Mdl. 20C Open Back
Inclinable Press, stroke: 1-1/2", slide
adjustment: 2-1/2", shut height: 7-1/2",
bed area: 13-3/4" x 24", S/N: 47332
Press Related
Assorted Rapid-Air Air Feeds, Aero &
Durant Scrap Choppers, Rapid-Air Coil
Feeds, [4] Screw Type Presses
16-Ton Minster No. 2 Open Back
Inclinable Press, stroke: 1-1/2", slide
adjustment: 1-3/4", shut height: 8-1/4",
250 SPM, bed area: 17" x 10", air clutch,
S/N: 2-17278
Presented By:
150 ASSORTED KICK PRESSES –
Mfgrs. Include: Adams, Leach,
Ruesch, Bosworth, Reyersford,
Chapman, Joraco, Etc.
PNEUMATIC DROP HAMMERS
Type 4DA Pneumatic Drop Hammer Co.
Pneumatic Lift Double Action Gravity
Drop Hammer, with Z80 guard, S/N: 187R
Type 2DA Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Double Action
Drop Hammer
Type C Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Drop Hammer
Pneumatic Lift Gravity Drop Hammer
with Z80 safety guard
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
2
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
1 OF 2
Bridgeport Series I 2HP Vertical Milling
Machines
Bridgeport Discovery 318 CNC Vertical Machining Center
1 OF 10
1 OF 2
LINK-O-MATICS
[10] Crafford Link-O-Matic CCP Mdl.
535-12 & 534-10, [4] with welders!,
[1] with interchangeable head,
S/Ns: 0629325; 0404308; 737158; 417010
[As New As 2008]
Also: ABI Mini-Link Mdl. Link-It,
S/N: 203N-1 W/Welder
XP Gravograph IS600 Engravers
4-SLIDE MACHINE
Nilson Mdl. 1000 Vertical 4-Slide Machine,
1/32 capacity, S/N: 116993 [1986]
FURNACES AND OVENS
SM Engineering Belt Furnace,
S/N: 06-8-18-6-shecftl-c-03, 8" belt
width, 0-20 IPM, 18 kw, 50 amp, with
Ammonia Dissociator (200 CF/H), digital
readouts [New 2007]
SM Engineering Belt Furnace,
S/N: 99-6-17.6-SHECFTL-C-04, 6" belt
width, 0-14 IPM, 18.3 kw, 48 amp, with
ammonia dissociator (200 CF/H), digital
readouts
SM Engineering Belt Furnace,
S/N: 85-8-20.5-SHECFT—30, 7.5" belt
width, 0-20 IPM, 75 amp, with ammonia
dissociator (250CF/H)
Feeler Mdl. FTL-618E High Accuracy Toolroom Lathe
(3) CI Hayes Belt Furnaces, Type LAC,
S/Ns: 15918; 15264; 14794, 6" belt width,
28kw, 79 amps, with ammonia dissociator,
digital readouts
Bostomatic Mdl. 312 CNC Vertical
Machining Center, with 12" x 42" table
size, 12-position automatic tool changer,
Bostomatic CNC controls, S/N: MM-456
Sentry Size 2 Electric Furnace Mdl. AY,
2500 degrees Fahrenheit, 14.5 amps,
S/N: A62186
ENGRAVERS
XP Gravograph IS6000 Engraver, with 19"
x 28" table, 100-240W, 400W, 20000/min,
S/N: 208014/0500
Lab-Line Imperial II Radiant Bench Oven,
S/N: 01090, tub size: 24" x 16" x 12" deep
Grieve Mdl. PL-326 Oven, 2000 watts, ID
28" x 19" x 22" deep
[2] Gravograph IS400-Vega Engravers,
with 12" x 16" tables, 300W, 100-240W,
S/Ns: 146424/0904; 146100/0504
EDMs
Hermes IS400 Engraver, S/N: E00685/A9
Agie Elox Mondo I CNC Wire EDM, with
Agie Futura II CNC controls
[2] Hermes Bench Mounted Engravers
LATHES
[2] Hitachi H-Cut 203M CNC Wire EDMs,
S/Ns: 0310659010; D310488011; tub size:
27" x 27" x 20" deep, with Fanuc HF CNC
controls, System 3R tooling
[3] Charmilles D10 EDMs, [1] with
Charmilles Isopulse Type P25 controls,
[2] with Charmilles Isopulse 12 controls
16" x 30" Leblond Regal Geared Head
Engine Lathe, with 45-1800 rpm spindle
speeds, 3-jaw chuck, threading dial,
S/N: 6C-1563
VERTICAL MACHINING CENTERS
10" x 28" Emco Toolroom Lathe, with
55-2000 rpm spindle speeds, collet chuck
Southbend Mdl. A Toolroom Lathe
Hardinge Speed Lathe
16" x 36" Southbend Lathe
Presented By:
MILLING MACHINES
[2] Bridgeport Series I 2HP Vertical
Milling Machines, with 9" x 42" table,
60-4200 rpm spindle speeds, Acu-Rite
Millmate 2-axis digital readout, Acu-Rite III
digital readout, S/Ns: 253652; 229825
Sharp First Mdl. LMV Vertical Milling
Machine, with 60-4200 rpm spindle
speeds, 9" x 42" power feed table, 2-axis
digital readout, S/N: 75118384
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
3
[2] Alexander Mdl. 2CG Tool Grinders,
S/Ns: 2608N; 1169
Darex Drill Sharpener
[50] Assorted Double & Single End
Polishers
Bridgeport 1J Vertical Milling Machine,
with 9" x 42" power feed table, 60-2720
rpm spindle speeds, S/N: 26243
Assorted Double End Grinders & Belt
Sanders
[2] Harig 618 Power Feed Surface
Grinders, [1] with 6" x 18" permanent
magnetic chuck, [1] with 6" x 12"
permanent magnetic chuck,
S/Ns: 3547-W; N/A
Harig 612 Hand Feed Surface Grinder,
with 6" x 12" permanent magnetic chuck,
S/N: 17583
Boyar Schultz 6" x 12" Hand Feed
Surface Grinder
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
Dreher Type DT4-40/VT Tumbler
Emco Mdl. FB-2 Bench Mill, with 6" x 24"
table size
GRINDERS & POLISHERS
Feeler Mdl. FTL-618E High Accuracy
Toolroom Lathe, S/N: TL-84227
Bridgeport Discovery 308 CNC Vertical
Machining Center, with 14" x 32" table
size, 8-position automatic tool changer,
Bridgeport DX-32 CNC controls,
S/N: 308-137
Harig 618 Power Feed Surface Grinders
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
MISCELLANEOUS TOOLROOM
16" DoAll Mdl. 1612-1 Vertical Bandsaw,
with 24" x 24" table size, blade welding
attachment, S/N: 148-711499
Wilton Mdl. 3400 Horizontal Bandsaw,
S/N: 03497
[2] 18" Wilton Floor Type Drill Presses,
120-3600 rpm spindle speeds
[2] 15" Clausing Bench Type Drill
Presses, spindle speeds to 4000 rpm
OTEC Mdl. CG3X50 3-Station Finishing Mill
OTEC Mdl. CF2X18 2-Station Finishing Mill
FINISHING DEPARTMENT
PLATING AREA
CASTING & WAX DEPARTMENT
OTEC Mdl. CF3X50 3-Station Finishing
Mill, with 19" diameter bowls,
S/N: 350/00-0108 [2000]
Branson Series 8300 Ultrasonic
Generator
Contenti ASEG Galloni Mdl. VCM Vacuum
Casting Machine, S/N: 034.97 [1997]
[2] Branson Series 8000 Ultrasonic
Generators
Romanoff Mdl. 20 Vacuum Table, with
bell jar, S/N: 119
[2] Branson Series 7000 Ultrasonic
Generators
[3] Yasui Mark II Vacuum Wax Injectors,
with auto clamp, S/Ns: 8560; 4487; 3084
OTEC Mdl. CF2X18 2-Station Finishing
Mill, with 13" diameter bowls,
S/N: 218/00-0196 [2000]
OTEC Mdl. CF50 Element Finishing Mill,
with 19" diameter bowl,
S/N: 150E/04-0011 [2004]
Complete Plating Lines!
[40] Assorted Stainless & Poly Tanks
(many multi-compartments), sizes range
from 17" x 17" x 24" deep to 30" x 80" x
24" deep
36" Diameter Vibratory Finishing Mill
[10] Mirro-Brite Vibratory Finishing Mills,
with 14-1/2" diameter bowls
[10] Rectifiers
[5] MG12V Magnetic Polishing Machines
Bath Minder Digital Controls
Dreher Type FT4-40/VT Tumbler,
4-station, S/N: 3769
[3] Astle Stainless Steel Heated Wash
Units, ID: 40" x 26" x 36" high; [2] 36" x
30" x 26" high
Dreher Tumbler
12-Station Motorized Tumbler
[2] Reimers Electric Steam Inc. Mdl.
RH-10 & RH-8 Electric Boilers, 100-psi,
S/Ns: 0999-55624; 0299-55024
Presented By:
Eisinger Bench Mounted Heated Platen
Press
[2] Hobart Mixers
Quantity of Assorted Flasks
Complete Late Model Waste
Treatment System
– [12] Assorted Poly Tanks
– ph Neutralization & A/A Treatment Control
System (installed 6/6/06)
– All necessary pumps, motors, controls,
meters, valves, etc.
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
4
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
1 OF 2
1 OF 3
[3] CI Hayes Belt Furnaces
SM Engineering Belt Furnace
Charmilles D10 EDMs
16" x 30" Leblond Regal
Geared Head Engine Lathe
650-Ton Ferrara Mdl. HY650T-S-US
Hydraulic Coining Press
250-Ton CMC Hi-Ton Hydraulic
Coining Presses
45-Ton Diemaster OBI Press
20-Ton Perkins Mdl. 20C OBI Press,
S/N: 47332
Link-O-Matics
Type 4DA Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Drop Hammer
Nilson Vertical 4-Slide Machine
COINING PRESSES
45-Ton Diemaster Open Back Inclinable
Press, air clutch, bed area: 18" x 30" LR,
S/N: 450BI-25-2
800-Ton Ferrara Ndk, 800T-S-US Hydraulic
Coining Press, S/N: 129/97/2HP
650-Ton Ferrara Mdl. HY650T-S-US
Hydraulic Coining Press, S/N: 178/99/6HP
[2] 250-Ton CMC Hi-Ton Hydraulic
Coining Presses, S/N: 48015-1/043;
48025-1/056 [As Is]
PRESSES
35-Ton Komtasu Mdl. OBS35-3 Open
Back Inclinable Press, S/N: 12174, stroke:
3.15", shut height: 8.27", slide adjustment:
2.17", bed area: 27.5" x 15.75", 60-120
SPM, with ISB light curtains, load monitor,
Arc-Trol-1 ISB digital tool protection system,
[1987]
With BIDSPOTTER.COM you can bid on items in auctions from
anywhere in the world! To register to bid in this Koster Industries Inc.
auction, please visit us at www.bidspotter.com
[2] 10-Ton Perkins Mdl. 10C Open Back
Inclinable Presses, stroke: 1-1/2", slide
adjustment: 1-1/2", shut height: 5-3/4",
bed area: 8" x 13-1/2", S/Ns: 47321; 47320
Approx. 50-Ton V&O Open Back
Inclinable Press, 90 SPM, air clutch, bed
area: 30" x 24", S/N: 50-S-133
LARGE QUANTITY OF ADDITIONAL OBI
PRESSES, Including: 7S & 5S Standard
Transfer Presses, 8-Ton Alva Allen,
55A Famco, 3-Ton Perkins, No. 3 Rouselle,
5A Famco, 20C Bliss, No. 2 Federal,
[2] 18-Ton Niagaras
28-Ton Perkins Mdl. 3758 Open Back
Inclinable Press, stroke: 2", slide
adjustment: 2-1/2", shut height: 10", air
clutch, S/N: 35953
Hobbing
Clifton Hydraulic Hobbing Press, Mdl.
500H, 500-Ton, 4-1/2" stroke, 7500 PSI,
S/N: 0203
20-Ton Perkins Mdl. 20C Open Back
Inclinable Press, stroke: 1-1/2", slide
adjustment: 2-1/2", shut height: 7-1/2",
bed area: 13-3/4" x 24", S/N: 47332
Press Related
Assorted Rapid-Air Air Feeds, Aero &
Durant Scrap Choppers, Rapid-Air Coil
Feeds, [4] Screw Type Presses
16-Ton Minster No. 2 Open Back
Inclinable Press, stroke: 1-1/2", slide
adjustment: 1-3/4", shut height: 8-1/4",
250 SPM, bed area: 17" x 10", air clutch,
S/N: 2-17278
Presented By:
150 ASSORTED KICK PRESSES –
Mfgrs. Include: Adams, Leach,
Ruesch, Bosworth, Reyersford,
Chapman, Joraco, Etc.
PNEUMATIC DROP HAMMERS
Type 4DA Pneumatic Drop Hammer Co.
Pneumatic Lift Double Action Gravity
Drop Hammer, with Z80 guard, S/N: 187R
Type 2DA Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Double Action
Drop Hammer
Type C Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Drop Hammer
Pneumatic Lift Gravity Drop Hammer
with Z80 safety guard
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
2
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
1 OF 2
Bridgeport Series I 2HP Vertical Milling
Machines
Bridgeport Discovery 318 CNC Vertical Machining Center
1 OF 10
1 OF 2
LINK-O-MATICS
[10] Crafford Link-O-Matic CCP Mdl.
535-12 & 534-10, [4] with welders!,
[1] with interchangeable head,
S/Ns: 0629325; 0404308; 737158; 417010
[As New As 2008]
Also: ABI Mini-Link Mdl. Link-It,
S/N: 203N-1 W/Welder
XP Gravograph IS600 Engravers
4-SLIDE MACHINE
Nilson Mdl. 1000 Vertical 4-Slide Machine,
1/32 capacity, S/N: 116993 [1986]
FURNACES AND OVENS
SM Engineering Belt Furnace,
S/N: 06-8-18-6-shecftl-c-03, 8" belt
width, 0-20 IPM, 18 kw, 50 amp, with
Ammonia Dissociator (200 CF/H), digital
readouts [New 2007]
SM Engineering Belt Furnace,
S/N: 99-6-17.6-SHECFTL-C-04, 6" belt
width, 0-14 IPM, 18.3 kw, 48 amp, with
ammonia dissociator (200 CF/H), digital
readouts
SM Engineering Belt Furnace,
S/N: 85-8-20.5-SHECFT—30, 7.5" belt
width, 0-20 IPM, 75 amp, with ammonia
dissociator (250CF/H)
Feeler Mdl. FTL-618E High Accuracy Toolroom Lathe
(3) CI Hayes Belt Furnaces, Type LAC,
S/Ns: 15918; 15264; 14794, 6" belt width,
28kw, 79 amps, with ammonia dissociator,
digital readouts
Bostomatic Mdl. 312 CNC Vertical
Machining Center, with 12" x 42" table
size, 12-position automatic tool changer,
Bostomatic CNC controls, S/N: MM-456
Sentry Size 2 Electric Furnace Mdl. AY,
2500 degrees Fahrenheit, 14.5 amps,
S/N: A62186
ENGRAVERS
XP Gravograph IS6000 Engraver, with 19"
x 28" table, 100-240W, 400W, 20000/min,
S/N: 208014/0500
Lab-Line Imperial II Radiant Bench Oven,
S/N: 01090, tub size: 24" x 16" x 12" deep
Grieve Mdl. PL-326 Oven, 2000 watts, ID
28" x 19" x 22" deep
[2] Gravograph IS400-Vega Engravers,
with 12" x 16" tables, 300W, 100-240W,
S/Ns: 146424/0904; 146100/0504
EDMs
Hermes IS400 Engraver, S/N: E00685/A9
Agie Elox Mondo I CNC Wire EDM, with
Agie Futura II CNC controls
[2] Hermes Bench Mounted Engravers
LATHES
[2] Hitachi H-Cut 203M CNC Wire EDMs,
S/Ns: 0310659010; D310488011; tub size:
27" x 27" x 20" deep, with Fanuc HF CNC
controls, System 3R tooling
[3] Charmilles D10 EDMs, [1] with
Charmilles Isopulse Type P25 controls,
[2] with Charmilles Isopulse 12 controls
16" x 30" Leblond Regal Geared Head
Engine Lathe, with 45-1800 rpm spindle
speeds, 3-jaw chuck, threading dial,
S/N: 6C-1563
VERTICAL MACHINING CENTERS
10" x 28" Emco Toolroom Lathe, with
55-2000 rpm spindle speeds, collet chuck
Southbend Mdl. A Toolroom Lathe
Hardinge Speed Lathe
16" x 36" Southbend Lathe
Presented By:
MILLING MACHINES
[2] Bridgeport Series I 2HP Vertical
Milling Machines, with 9" x 42" table,
60-4200 rpm spindle speeds, Acu-Rite
Millmate 2-axis digital readout, Acu-Rite III
digital readout, S/Ns: 253652; 229825
Sharp First Mdl. LMV Vertical Milling
Machine, with 60-4200 rpm spindle
speeds, 9" x 42" power feed table, 2-axis
digital readout, S/N: 75118384
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
3
[2] Alexander Mdl. 2CG Tool Grinders,
S/Ns: 2608N; 1169
Darex Drill Sharpener
[50] Assorted Double & Single End
Polishers
Bridgeport 1J Vertical Milling Machine,
with 9" x 42" power feed table, 60-2720
rpm spindle speeds, S/N: 26243
Assorted Double End Grinders & Belt
Sanders
[2] Harig 618 Power Feed Surface
Grinders, [1] with 6" x 18" permanent
magnetic chuck, [1] with 6" x 12"
permanent magnetic chuck,
S/Ns: 3547-W; N/A
Harig 612 Hand Feed Surface Grinder,
with 6" x 12" permanent magnetic chuck,
S/N: 17583
Boyar Schultz 6" x 12" Hand Feed
Surface Grinder
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
Dreher Type DT4-40/VT Tumbler
Emco Mdl. FB-2 Bench Mill, with 6" x 24"
table size
GRINDERS & POLISHERS
Feeler Mdl. FTL-618E High Accuracy
Toolroom Lathe, S/N: TL-84227
Bridgeport Discovery 308 CNC Vertical
Machining Center, with 14" x 32" table
size, 8-position automatic tool changer,
Bridgeport DX-32 CNC controls,
S/N: 308-137
Harig 618 Power Feed Surface Grinders
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
MISCELLANEOUS TOOLROOM
16" DoAll Mdl. 1612-1 Vertical Bandsaw,
with 24" x 24" table size, blade welding
attachment, S/N: 148-711499
Wilton Mdl. 3400 Horizontal Bandsaw,
S/N: 03497
[2] 18" Wilton Floor Type Drill Presses,
120-3600 rpm spindle speeds
[2] 15" Clausing Bench Type Drill
Presses, spindle speeds to 4000 rpm
OTEC Mdl. CG3X50 3-Station Finishing Mill
OTEC Mdl. CF2X18 2-Station Finishing Mill
FINISHING DEPARTMENT
PLATING AREA
CASTING & WAX DEPARTMENT
OTEC Mdl. CF3X50 3-Station Finishing
Mill, with 19" diameter bowls,
S/N: 350/00-0108 [2000]
Branson Series 8300 Ultrasonic
Generator
Contenti ASEG Galloni Mdl. VCM Vacuum
Casting Machine, S/N: 034.97 [1997]
[2] Branson Series 8000 Ultrasonic
Generators
Romanoff Mdl. 20 Vacuum Table, with
bell jar, S/N: 119
[2] Branson Series 7000 Ultrasonic
Generators
[3] Yasui Mark II Vacuum Wax Injectors,
with auto clamp, S/Ns: 8560; 4487; 3084
OTEC Mdl. CF2X18 2-Station Finishing
Mill, with 13" diameter bowls,
S/N: 218/00-0196 [2000]
OTEC Mdl. CF50 Element Finishing Mill,
with 19" diameter bowl,
S/N: 150E/04-0011 [2004]
Complete Plating Lines!
[40] Assorted Stainless & Poly Tanks
(many multi-compartments), sizes range
from 17" x 17" x 24" deep to 30" x 80" x
24" deep
36" Diameter Vibratory Finishing Mill
[10] Mirro-Brite Vibratory Finishing Mills,
with 14-1/2" diameter bowls
[10] Rectifiers
[5] MG12V Magnetic Polishing Machines
Bath Minder Digital Controls
Dreher Type FT4-40/VT Tumbler,
4-station, S/N: 3769
[3] Astle Stainless Steel Heated Wash
Units, ID: 40" x 26" x 36" high; [2] 36" x
30" x 26" high
Dreher Tumbler
12-Station Motorized Tumbler
[2] Reimers Electric Steam Inc. Mdl.
RH-10 & RH-8 Electric Boilers, 100-psi,
S/Ns: 0999-55624; 0299-55024
Presented By:
Eisinger Bench Mounted Heated Platen
Press
[2] Hobart Mixers
Quantity of Assorted Flasks
Complete Late Model Waste
Treatment System
– [12] Assorted Poly Tanks
– ph Neutralization & A/A Treatment Control
System (installed 6/6/06)
– All necessary pumps, motors, controls,
meters, valves, etc.
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
4
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
1 OF 2
1 OF 3
[3] CI Hayes Belt Furnaces
SM Engineering Belt Furnace
Charmilles D10 EDMs
16" x 30" Leblond Regal
Geared Head Engine Lathe
650-Ton Ferrara Mdl. HY650T-S-US
Hydraulic Coining Press
250-Ton CMC Hi-Ton Hydraulic
Coining Presses
45-Ton Diemaster OBI Press
20-Ton Perkins Mdl. 20C OBI Press,
S/N: 47332
Link-O-Matics
Type 4DA Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Drop Hammer
Nilson Vertical 4-Slide Machine
COINING PRESSES
45-Ton Diemaster Open Back Inclinable
Press, air clutch, bed area: 18" x 30" LR,
S/N: 450BI-25-2
800-Ton Ferrara Ndk, 800T-S-US Hydraulic
Coining Press, S/N: 129/97/2HP
650-Ton Ferrara Mdl. HY650T-S-US
Hydraulic Coining Press, S/N: 178/99/6HP
[2] 250-Ton CMC Hi-Ton Hydraulic
Coining Presses, S/N: 48015-1/043;
48025-1/056 [As Is]
PRESSES
35-Ton Komtasu Mdl. OBS35-3 Open
Back Inclinable Press, S/N: 12174, stroke:
3.15", shut height: 8.27", slide adjustment:
2.17", bed area: 27.5" x 15.75", 60-120
SPM, with ISB light curtains, load monitor,
Arc-Trol-1 ISB digital tool protection system,
[1987]
With BIDSPOTTER.COM you can bid on items in auctions from
anywhere in the world! To register to bid in this Koster Industries Inc.
auction, please visit us at www.bidspotter.com
[2] 10-Ton Perkins Mdl. 10C Open Back
Inclinable Presses, stroke: 1-1/2", slide
adjustment: 1-1/2", shut height: 5-3/4",
bed area: 8" x 13-1/2", S/Ns: 47321; 47320
Approx. 50-Ton V&O Open Back
Inclinable Press, 90 SPM, air clutch, bed
area: 30" x 24", S/N: 50-S-133
LARGE QUANTITY OF ADDITIONAL OBI
PRESSES, Including: 7S & 5S Standard
Transfer Presses, 8-Ton Alva Allen,
55A Famco, 3-Ton Perkins, No. 3 Rouselle,
5A Famco, 20C Bliss, No. 2 Federal,
[2] 18-Ton Niagaras
28-Ton Perkins Mdl. 3758 Open Back
Inclinable Press, stroke: 2", slide
adjustment: 2-1/2", shut height: 10", air
clutch, S/N: 35953
Hobbing
Clifton Hydraulic Hobbing Press, Mdl.
500H, 500-Ton, 4-1/2" stroke, 7500 PSI,
S/N: 0203
20-Ton Perkins Mdl. 20C Open Back
Inclinable Press, stroke: 1-1/2", slide
adjustment: 2-1/2", shut height: 7-1/2",
bed area: 13-3/4" x 24", S/N: 47332
Press Related
Assorted Rapid-Air Air Feeds, Aero &
Durant Scrap Choppers, Rapid-Air Coil
Feeds, [4] Screw Type Presses
16-Ton Minster No. 2 Open Back
Inclinable Press, stroke: 1-1/2", slide
adjustment: 1-3/4", shut height: 8-1/4",
250 SPM, bed area: 17" x 10", air clutch,
S/N: 2-17278
Presented By:
150 ASSORTED KICK PRESSES –
Mfgrs. Include: Adams, Leach,
Ruesch, Bosworth, Reyersford,
Chapman, Joraco, Etc.
PNEUMATIC DROP HAMMERS
Type 4DA Pneumatic Drop Hammer Co.
Pneumatic Lift Double Action Gravity
Drop Hammer, with Z80 guard, S/N: 187R
Type 2DA Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Double Action
Drop Hammer
Type C Pneumatic Drop Hammer Co.
Pneumatic Lift Gravity Drop Hammer
Pneumatic Lift Gravity Drop Hammer
with Z80 safety guard
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
2
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
1 OF 2
Bridgeport Series I 2HP Vertical Milling
Machines
Bridgeport Discovery 318 CNC Vertical Machining Center
1 OF 10
1 OF 2
LINK-O-MATICS
[10] Crafford Link-O-Matic CCP Mdl.
535-12 & 534-10, [4] with welders!,
[1] with interchangeable head,
S/Ns: 0629325; 0404308; 737158; 417010
[As New As 2008]
Also: ABI Mini-Link Mdl. Link-It,
S/N: 203N-1 W/Welder
XP Gravograph IS600 Engravers
4-SLIDE MACHINE
Nilson Mdl. 1000 Vertical 4-Slide Machine,
1/32 capacity, S/N: 116993 [1986]
FURNACES AND OVENS
SM Engineering Belt Furnace,
S/N: 06-8-18-6-shecftl-c-03, 8" belt
width, 0-20 IPM, 18 kw, 50 amp, with
Ammonia Dissociator (200 CF/H), digital
readouts [New 2007]
SM Engineering Belt Furnace,
S/N: 99-6-17.6-SHECFTL-C-04, 6" belt
width, 0-14 IPM, 18.3 kw, 48 amp, with
ammonia dissociator (200 CF/H), digital
readouts
SM Engineering Belt Furnace,
S/N: 85-8-20.5-SHECFT—30, 7.5" belt
width, 0-20 IPM, 75 amp, with ammonia
dissociator (250CF/H)
Feeler Mdl. FTL-618E High Accuracy Toolroom Lathe
(3) CI Hayes Belt Furnaces, Type LAC,
S/Ns: 15918; 15264; 14794, 6" belt width,
28kw, 79 amps, with ammonia dissociator,
digital readouts
Bostomatic Mdl. 312 CNC Vertical
Machining Center, with 12" x 42" table
size, 12-position automatic tool changer,
Bostomatic CNC controls, S/N: MM-456
Sentry Size 2 Electric Furnace Mdl. AY,
2500 degrees Fahrenheit, 14.5 amps,
S/N: A62186
ENGRAVERS
XP Gravograph IS6000 Engraver, with 19"
x 28" table, 100-240W, 400W, 20000/min,
S/N: 208014/0500
Lab-Line Imperial II Radiant Bench Oven,
S/N: 01090, tub size: 24" x 16" x 12" deep
Grieve Mdl. PL-326 Oven, 2000 watts, ID
28" x 19" x 22" deep
[2] Gravograph IS400-Vega Engravers,
with 12" x 16" tables, 300W, 100-240W,
S/Ns: 146424/0904; 146100/0504
EDMs
Hermes IS400 Engraver, S/N: E00685/A9
Agie Elox Mondo I CNC Wire EDM, with
Agie Futura II CNC controls
[2] Hermes Bench Mounted Engravers
LATHES
[2] Hitachi H-Cut 203M CNC Wire EDMs,
S/Ns: 0310659010; D310488011; tub size:
27" x 27" x 20" deep, with Fanuc HF CNC
controls, System 3R tooling
[3] Charmilles D10 EDMs, [1] with
Charmilles Isopulse Type P25 controls,
[2] with Charmilles Isopulse 12 controls
16" x 30" Leblond Regal Geared Head
Engine Lathe, with 45-1800 rpm spindle
speeds, 3-jaw chuck, threading dial,
S/N: 6C-1563
VERTICAL MACHINING CENTERS
10" x 28" Emco Toolroom Lathe, with
55-2000 rpm spindle speeds, collet chuck
Southbend Mdl. A Toolroom Lathe
Hardinge Speed Lathe
16" x 36" Southbend Lathe
Presented By:
MILLING MACHINES
[2] Bridgeport Series I 2HP Vertical
Milling Machines, with 9" x 42" table,
60-4200 rpm spindle speeds, Acu-Rite
Millmate 2-axis digital readout, Acu-Rite III
digital readout, S/Ns: 253652; 229825
Sharp First Mdl. LMV Vertical Milling
Machine, with 60-4200 rpm spindle
speeds, 9" x 42" power feed table, 2-axis
digital readout, S/N: 75118384
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
3
[2] Alexander Mdl. 2CG Tool Grinders,
S/Ns: 2608N; 1169
Darex Drill Sharpener
[50] Assorted Double & Single End
Polishers
Bridgeport 1J Vertical Milling Machine,
with 9" x 42" power feed table, 60-2720
rpm spindle speeds, S/N: 26243
Assorted Double End Grinders & Belt
Sanders
[2] Harig 618 Power Feed Surface
Grinders, [1] with 6" x 18" permanent
magnetic chuck, [1] with 6" x 12"
permanent magnetic chuck,
S/Ns: 3547-W; N/A
Harig 612 Hand Feed Surface Grinder,
with 6" x 12" permanent magnetic chuck,
S/N: 17583
Boyar Schultz 6" x 12" Hand Feed
Surface Grinder
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
Dreher Type DT4-40/VT Tumbler
Emco Mdl. FB-2 Bench Mill, with 6" x 24"
table size
GRINDERS & POLISHERS
Feeler Mdl. FTL-618E High Accuracy
Toolroom Lathe, S/N: TL-84227
Bridgeport Discovery 308 CNC Vertical
Machining Center, with 14" x 32" table
size, 8-position automatic tool changer,
Bridgeport DX-32 CNC controls,
S/N: 308-137
Harig 618 Power Feed Surface Grinders
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
MISCELLANEOUS TOOLROOM
16" DoAll Mdl. 1612-1 Vertical Bandsaw,
with 24" x 24" table size, blade welding
attachment, S/N: 148-711499
Wilton Mdl. 3400 Horizontal Bandsaw,
S/N: 03497
[2] 18" Wilton Floor Type Drill Presses,
120-3600 rpm spindle speeds
[2] 15" Clausing Bench Type Drill
Presses, spindle speeds to 4000 rpm
OTEC Mdl. CG3X50 3-Station Finishing Mill
OTEC Mdl. CF2X18 2-Station Finishing Mill
FINISHING DEPARTMENT
PLATING AREA
CASTING & WAX DEPARTMENT
OTEC Mdl. CF3X50 3-Station Finishing
Mill, with 19" diameter bowls,
S/N: 350/00-0108 [2000]
Branson Series 8300 Ultrasonic
Generator
Contenti ASEG Galloni Mdl. VCM Vacuum
Casting Machine, S/N: 034.97 [1997]
[2] Branson Series 8000 Ultrasonic
Generators
Romanoff Mdl. 20 Vacuum Table, with
bell jar, S/N: 119
[2] Branson Series 7000 Ultrasonic
Generators
[3] Yasui Mark II Vacuum Wax Injectors,
with auto clamp, S/Ns: 8560; 4487; 3084
OTEC Mdl. CF2X18 2-Station Finishing
Mill, with 13" diameter bowls,
S/N: 218/00-0196 [2000]
OTEC Mdl. CF50 Element Finishing Mill,
with 19" diameter bowl,
S/N: 150E/04-0011 [2004]
Complete Plating Lines!
[40] Assorted Stainless & Poly Tanks
(many multi-compartments), sizes range
from 17" x 17" x 24" deep to 30" x 80" x
24" deep
36" Diameter Vibratory Finishing Mill
[10] Mirro-Brite Vibratory Finishing Mills,
with 14-1/2" diameter bowls
[10] Rectifiers
[5] MG12V Magnetic Polishing Machines
Bath Minder Digital Controls
Dreher Type FT4-40/VT Tumbler,
4-station, S/N: 3769
[3] Astle Stainless Steel Heated Wash
Units, ID: 40" x 26" x 36" high; [2] 36" x
30" x 26" high
Dreher Tumbler
12-Station Motorized Tumbler
[2] Reimers Electric Steam Inc. Mdl.
RH-10 & RH-8 Electric Boilers, 100-psi,
S/Ns: 0999-55624; 0299-55024
Presented By:
Eisinger Bench Mounted Heated Platen
Press
[2] Hobart Mixers
Quantity of Assorted Flasks
Complete Late Model Waste
Treatment System
– [12] Assorted Poly Tanks
– ph Neutralization & A/A Treatment Control
System (installed 6/6/06)
– All necessary pumps, motors, controls,
meters, valves, etc.
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
4
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
650-Ton Ferrara Mdl.
HY650T-S-US Hydraulic
Coining Press
AUCTION SALE
Machinery and Equipment of a Major Giftware/ Jewelry Manufacturer
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 13%
Buyer’s Premium. A minimum deposit of 25% on all lots purchased is required at the
time of sale in cash, certified or cashier’s check. Company or personal checks will
be accepted only if accompanied by a letter from the payor’s bank guaranteeing
unqualified payment to Koster Industries Inc. All checks must be made payable to
the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster
Industries Inc. on balances due will be accepted with prior arrangement. No lot may
be removed until complete settlement is made.
Machinery and Equipment
of a Major Giftware/
Jewelry Manufacturer
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
By Order of: Allan M Shine, Esq.
Receiver Winograd, Shine & Zacks, P.C.
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
sale Date: Thursday, April 16th, 2009 at 10:30 a.m.
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Assorted Stainless & Poly Tanks
PTI-Solco Walk Thru Metal Detector
Presorted
First-Class Mail
U.S. Postage
[3] Astle Stainless Steel Heated
Wash Units
PAID
Minneapolis, MN
Permit #3723
Inspection Dates: Wednesday, April 15th from 8:00 a.m. to 4:00 p.m. and morning of sale
1 of 10 s
as new a
2008
40HP Gardner Denver Mdl. EDE99M Air Compressor
2007
AXP/9030749
Contenti ASEG Galloni Mdl. VCM
Vacuum Casting Machine
AUCTION SALE
Waste Treatment Area
AIR COMPRESSORS
Gardner Denver Mdl. EDE99M 40HP Air
Compressor, 125-psig, S/N: S111337
[2] Torit Mdl. 20-5-FB-55 4-Bag Dust
Collectors
AAF Size 12 Type D Roto-Clone Dust
Collector
[5] Reach-In Type Shot Blast Cabinets
CMI Save Time 2000 Series Bio Scan II
Time Clock System
[2] AAF Arestall Dust Collectors
Electronic Bonding Inc. Mdl. 7000A Mini
Fusion Welder, S/N: 73C-2
Hankison Mdl. 80170 Air Dryer
SAFES
MISCELLANEOUS
Air Receiving Tank
Meilink 2-Door Safe, Class A TR/TL
SECURITY EQUIPMENT
[4] Mosler 2-Door Safes, [3] Class A,
[1] Class 350
2000# Clark Mdl. TM12 Electric Forklift
Truck, with battery charger,
S/N: TM127-007-5015FA
Branson Series 8000 Ultrasonic
Generators
Vulcatrol Heated Platen Press
[3] Bench Mounted Power-Hone Honing
Machines
Gardner Denver 30HP Tank Mounted Air
Compressors
PTI-Solco Walk-Thru Metal Detector, with
computer & software for control purposes
[Note: unit less than 1 year old]
Heimann Systems X-Ray Unit, Belt
Conveyor
Security System Consisting of:
– [32] cameras (indoor & outdoor), most color
– monitors, DVR drive, internet access
DUST COLLECTORS
Torit Downflo Mdl. DFT3-18 Dust
Collector, with 18-filter cartridges,
vibrating, S/N: IG482517-001
[2] Acme 2-Door Safes
LARGE QUANTITY OF DIGITAL
BENCH SCALES, Including: Mettler
PE360, Mettler PC1350, Mettler PE24,
Mettler PE16, Sartorius, Sauter, S300
Pennsylvania, Setra Super Count High
Resolution Counting Scales
MISCELLANEOUS MACHINERY
[9] Joyal Bench Welders
SRA Portable Soldering Units
[3] Fusion Automatic Paste Applicators
Bench Mounted 5" Wide Hand Roll
Ariens ST928 Snow Blower
Coleman Powermate 10HP Portable
Generator
12" x 16-gauge Bench Shear
12" Nikon V-12 Optical Comparator,
S/N: 257056
10" Micro-Vu Optical Comparator
Lassy Hand Tapper
Presented By:
MISCELLANEOUS SHOP SUPPORT
Jewelers Benches, Lights, Hand Presses,
Scales, Soldering Units, Vidmar Tool
Cabinets, Pallet Racking, Adjustable Steel
Shelving, 2-Door Steel Storage Cabinets,
Jewelers Balls, Jewelers Tools, Flame Proof
Storage Cabinets, High Speed Drills, Bench
Grinders, Shop Furniture, Dell Optiplex
Computers, Etc.
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
Machinery and Equipment
of a Major Giftware/
Jewelry Manufacturer
5
SM Engineering Belt Furnace
By Order of: Allan M Shine, Esq.
Receiver Winograd, Shine & Zacks, P.C.
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
sale Date: Thursday, April 16th, 2009 at 10:30 a.m.
Inspection Dates: Wednesday, April 15th from 8:00 a.m. to 4:00 p.m. and morning of sale
Heimann Systems
X-Ray Unit
1987
Directions:
From Providence Airport (Points North):
Take Route 95 North
From Providence (Points South):
Take Route 95 South
Take Exit#16 RI 10 North Toward RI-1/
Cranston Street
Take Exit#16 RI Towards Cranston
Take the NIANTIC Avenue Exit toward/
Industrial Park/Cranston Street
Colibri is at the Foot of Exit – Corner Dupont
Drive @ 100 Niantic Avenue
Bear Left on Exit and go Straight through
Light onto DuPont Drive — Plant parking
on your right.
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
Link-O-Matics
Merge Onto RI 10 North Towards RI-2/
Resevoir Ave.
Take NIANTIC Avenue Exit toward/Industrial
Park/Cranston St.
Colibri is at the Foot of Exit – Corner Dupont
Drive @ 100 Niantic Avenue
Bear Left on Exit and go Straight through Light
onto DuPont Drive — Plant parking on your right.
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
800-Ton Ferrara Mdl. 800T-A-US Hydraulic
Coining Press
35-Ton Komatsu Mdl. OBS35-3 OBI Press,
S/N: 12174
Agie Elox Mondo CNC Wire EDM
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Presented By:
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
650-Ton Ferrara Mdl.
HY650T-S-US Hydraulic
Coining Press
AUCTION SALE
Machinery and Equipment of a Major Giftware/ Jewelry Manufacturer
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 13%
Buyer’s Premium. A minimum deposit of 25% on all lots purchased is required at the
time of sale in cash, certified or cashier’s check. Company or personal checks will
be accepted only if accompanied by a letter from the payor’s bank guaranteeing
unqualified payment to Koster Industries Inc. All checks must be made payable to
the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster
Industries Inc. on balances due will be accepted with prior arrangement. No lot may
be removed until complete settlement is made.
Machinery and Equipment
of a Major Giftware/
Jewelry Manufacturer
IMPORTANT NOTICE: Although information has been obtained from sources deemed
reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as
to the accuracy of the information herein contained. It is for this reason that buyers
should avail themselves of the opportunity to make inspection prior to the sale.
By Order of: Allan M Shine, Esq.
Receiver Winograd, Shine & Zacks, P.C.
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
sale Date: Thursday, April 16th, 2009 at 10:30 a.m.
AUCTIONEERS • LIQUIDATORS • APPRAISERS
555 Broadhollow Road, Melville, New York 11747
(631) 454-1766 • Fax (631) 454-1779
Assorted Stainless & Poly Tanks
PTI-Solco Walk Thru Metal Detector
Presorted
First-Class Mail
U.S. Postage
[3] Astle Stainless Steel Heated
Wash Units
PAID
Minneapolis, MN
Permit #3723
Inspection Dates: Wednesday, April 15th from 8:00 a.m. to 4:00 p.m. and morning of sale
1 of 10 s
as new a
2008
40HP Gardner Denver Mdl. EDE99M Air Compressor
2007
AXP/9030749
Contenti ASEG Galloni Mdl. VCM
Vacuum Casting Machine
AUCTION SALE
Waste Treatment Area
AIR COMPRESSORS
Gardner Denver Mdl. EDE99M 40HP Air
Compressor, 125-psig, S/N: S111337
[2] Torit Mdl. 20-5-FB-55 4-Bag Dust
Collectors
AAF Size 12 Type D Roto-Clone Dust
Collector
[5] Reach-In Type Shot Blast Cabinets
CMI Save Time 2000 Series Bio Scan II
Time Clock System
[2] AAF Arestall Dust Collectors
Electronic Bonding Inc. Mdl. 7000A Mini
Fusion Welder, S/N: 73C-2
Hankison Mdl. 80170 Air Dryer
SAFES
MISCELLANEOUS
Air Receiving Tank
Meilink 2-Door Safe, Class A TR/TL
SECURITY EQUIPMENT
[4] Mosler 2-Door Safes, [3] Class A,
[1] Class 350
2000# Clark Mdl. TM12 Electric Forklift
Truck, with battery charger,
S/N: TM127-007-5015FA
Branson Series 8000 Ultrasonic
Generators
Vulcatrol Heated Platen Press
[3] Bench Mounted Power-Hone Honing
Machines
Gardner Denver 30HP Tank Mounted Air
Compressors
PTI-Solco Walk-Thru Metal Detector, with
computer & software for control purposes
[Note: unit less than 1 year old]
Heimann Systems X-Ray Unit, Belt
Conveyor
Security System Consisting of:
– [32] cameras (indoor & outdoor), most color
– monitors, DVR drive, internet access
DUST COLLECTORS
Torit Downflo Mdl. DFT3-18 Dust
Collector, with 18-filter cartridges,
vibrating, S/N: IG482517-001
[2] Acme 2-Door Safes
LARGE QUANTITY OF DIGITAL
BENCH SCALES, Including: Mettler
PE360, Mettler PC1350, Mettler PE24,
Mettler PE16, Sartorius, Sauter, S300
Pennsylvania, Setra Super Count High
Resolution Counting Scales
MISCELLANEOUS MACHINERY
[9] Joyal Bench Welders
SRA Portable Soldering Units
[3] Fusion Automatic Paste Applicators
Bench Mounted 5" Wide Hand Roll
Ariens ST928 Snow Blower
Coleman Powermate 10HP Portable
Generator
12" x 16-gauge Bench Shear
12" Nikon V-12 Optical Comparator,
S/N: 257056
10" Micro-Vu Optical Comparator
Lassy Hand Tapper
Presented By:
MISCELLANEOUS SHOP SUPPORT
Jewelers Benches, Lights, Hand Presses,
Scales, Soldering Units, Vidmar Tool
Cabinets, Pallet Racking, Adjustable Steel
Shelving, 2-Door Steel Storage Cabinets,
Jewelers Balls, Jewelers Tools, Flame Proof
Storage Cabinets, High Speed Drills, Bench
Grinders, Shop Furniture, Dell Optiplex
Computers, Etc.
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
Machinery and Equipment
of a Major Giftware/
Jewelry Manufacturer
5
SM Engineering Belt Furnace
By Order of: Allan M Shine, Esq.
Receiver Winograd, Shine & Zacks, P.C.
The Colibri Group
100 Niantic Avenue, Providence, Rhode Island 02907
sale Date: Thursday, April 16th, 2009 at 10:30 a.m.
Inspection Dates: Wednesday, April 15th from 8:00 a.m. to 4:00 p.m. and morning of sale
Heimann Systems
X-Ray Unit
1987
Directions:
From Providence Airport (Points North):
Take Route 95 North
From Providence (Points South):
Take Route 95 South
Take Exit#16 RI 10 North Toward RI-1/
Cranston Street
Take Exit#16 RI Towards Cranston
Take the NIANTIC Avenue Exit toward/
Industrial Park/Cranston Street
Colibri is at the Foot of Exit – Corner Dupont
Drive @ 100 Niantic Avenue
Bear Left on Exit and go Straight through
Light onto DuPont Drive — Plant parking
on your right.
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]
Link-O-Matics
Merge Onto RI 10 North Towards RI-2/
Resevoir Ave.
Take NIANTIC Avenue Exit toward/Industrial
Park/Cranston St.
Colibri is at the Foot of Exit – Corner Dupont
Drive @ 100 Niantic Avenue
Bear Left on Exit and go Straight through Light
onto DuPont Drive — Plant parking on your right.
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
800-Ton Ferrara Mdl. 800T-A-US Hydraulic
Coining Press
35-Ton Komatsu Mdl. OBS35-3 OBI Press,
S/N: 12174
Agie Elox Mondo CNC Wire EDM
With BIDSPOTTER.COM you can bid on items in auctions from anywhere in the world!
To register to bid in this Koster Industries Inc. auction, please visit us at www.bidspotter.com
Presented By:
In Conjunction with:
Corporate Office:
555 Broadhollow Road
Melville, NY 11747
Phone: (631) 454-1766
Fax: (631) 454-1779
AUCTIONEERS • LIQUIDATORS • APPRAISERS
http://www.kosterindustries.com • e-mail: [email protected]
136 Newell Avenue • Pawtucket, RI 02860
Tel: (401) 724-3200 • Fax: (401) 728-5770
www.goldmachinery.com • [email protected]