LUBE EQUIPMENT - Prime Automotive Warehouse

LUBE
EQUIPMENT
LUBRICATION EQUIPMENT
95
Return To Quick Reference Index
LUBRICATION EQUIPMENT
LUBE
EQUIPMENT
Grease/Oil Guns,
Systems, Pumps,
Dispensers,
Reels, Drains,
Fittings, & more
96
Return To Quick Reference Index
FUEL TRANSFER
PUMPS
ROTARY & PISTON
HAND PUMPS
97
Return To Quick Reference Index
LUBRICATION EQUIPMENT
Lever Action Bucket Pump,
Pump Oilers, Fittings
& More
LUBRICATION EQUIPMENT
740L
GREASE GUNS / AIR GREASING SYSTEMS
GEAR LUBE DISPENSERS
615
877
535
878
917
977
989
LUBRICATION EQUIPMENT
1142
535
615L
740L
877
878
917
977
989
1133
1134
1142
1147
1148
1163
1201L
1210
1215
1230
Manual gear lube dispenser for 120lb drum, cast iron pump outlet & handle,
comes with pint meter, roll around base, 5’ hose and nozzle
Suction gun that holds up to 18 ounces of fluid, flexible nozzle for
transmission, differential or oil filter service, follower fitted to barrel for
superior suction
Heavy duty high-pressure control valve for air greasing systems, 7,500psi
maximum operating pressure, trigger guard, reversible inlet check seat &
hydraulic jaws provide double life
Mechanical lube meter, 16 quart dial total in 1/4 quart graduations,
1,000psi, 4.0gpm, 10” flex extension with nozzle
Mechanical gear lube meter, 8 pint dial total in 1/16 gallon graduations,
1,000psi, 4.0gpm, 7” rigid extension with nozzle
Air greasing system for 120lb drum of grease, dispenses 45 ounces of
NLGI-02 grease per minute @ 150psi, includes pump, drum cover, base,
delivery kit, and follower plate, double action pump, 50:1 ratio
Electronic lube meter, totalizing liters or gallons, 1015psi, 5gpm, rigid 45°
swivel automatic nozzle
Air greasing system for 25-50lb drum of grease, dispenses 45 ounces of
NLGI-02 grease per minute @ 150psi, includes pump, drum cover, base,
delivery kit, and follower plate, double action pump, 50:1 ratio
Heavy duty pistol grip type grease gun with 18” whip hose & coupler
Extra heavy duty pistol grip type grease gun, cast head design, jam proof
handle return mechanism, develops up to 7,500psi, includes 18” whip
hose, 4” rigid tube & coupler
The most popular heavy duty lever type grease gun produced, two way
filling, suction & cartridge, variable stroke/variable pressure, short stroke
high pressure, long stroke-high volume, includes rigid tube & coupler
same as the 1142, but includes 18” whip hose & coupler, flip-over follower
set for cartridge use
Same as the 1142, with handle grip and vent valve for purging air from the
gun
Air operated fully automatic pistol grip grease gun, self-priming, cycles
continuously when trigger is pulled, CE certified, flip-over follower
eliminates grease bypassing, locking follower rod for easy reloading,
three-way loading, 40:1 air motor capable of 6,000psi, air operating range
from 40-150psi
12 volt replacement battery for 1242 / 1244 PowerLuber
110 volt 1 hour fast charger for use with 1201, automatic trickle charge
maintaining mode
12 volt to 12 volt DC field charger for use with 1201 battery
30” whip hose designed specifically for use with 1242 / 1244 PowerLuber,
working pressure 7,500psi, 7/16” UNEF inlet fitting, 1/8” NPT outlet
1133
1147
1163
1201L
1210
1134
1215
98
Return To Quick Reference Index
LUBRICATION EQUIPMENT
GREASE GUNS / AIR GREASING SYSTEMS
GEAR LUBE DISPENSERS
1244
1292
1244
1292
1401L
1410
1415A
1444
2435
4417
4481
4489
84829
PowerLuber, 12 volt rechargeable cordless grease gun, delivers consistent
grease flow at up to 6,000psi, CE approved, machined & hardened piston,
plated steel barrel with flip-over follower, locking follower rod, bleeder
valve, comes with two battery, 110 volt fast charger, 30” whip hose & case
Manual grease pump for 25-50lb refinery container, maximum pressure of
2,500psi, comes with coupler, 5’ hose, & follower
14.4 volt replacement battery for 1442 / 1444 PowerLuber
110 volt 1 hour fast charger for use with 1401, automatic trickle charge
maintaining mode
12 volt to 14 volt DC field charger for use with 1444 PowerLuber
PowerLuber, 14.4 volt rechargeable cordless grease gun, delivers consistent
grease flow at up to 10,000psi, CE approved, machined & hardened
piston, plated steel barrel with flip-over follower, locking follower rod,
bleeder valve, low /high pressure switch, built-in bypass in motor to
prevent overloads, comes with two batteries, 110 volt fast charger, 30”
whip hose & case
Air operated gear lube dispenser for 120lb drum, 3:1 ratio pump, air expeller
built in to pump tube, includes roll around base, 5’ hose & nozzle
120lb Value Series 40:1 Single-Acting Grease Pump includes four wheel dolly caster, high pressure grease control valve & coupler, universal swivel, 7’ connecting hose, and flexible follower, operates on shop air 40-150psi, maximum grease output of 6000psi with 5” of grease per minute
28gal Oil Rider portable pump, tank & meter package, service 20 cars or
more, dispenses motor oils, automatic transmission fluid, gear oil and
hydraulic oils, 4gpm delivery pump, electronic meter that measures in quart
or liters, 10’ hose, air line regulator, gauge, nipple & coupler, lightweight
polyethylene tank & large pneumatic wheels
35lb Value Series 40:1 Single-Acting Grease Pump includes high pressure grease control valve & coupler, universal swivel, 7’ connecting hose, and flexible follower, operates on shop air 40-150psi, maximum grease output of 6000psi with 5” of grease per minute
1:1 stub piston transfer pump, 14gpm free delivery, 150psi max inlet
pressure, for new oil transfer
1401
1410
1444
2435
84829
4489
4417
99
Return To Quick Reference Index
LUBRICATION EQUIPMENT
4481
LUBRICATION EQUIPMENT
W582DB
W54204
GREASE GUNS/AIR GREASING SYSTEMS
GEAR LUBE DISPENSERS
W54202
W54203
W54205
W54220
30-300
M582DB
W54202
W54203
W54204
W54205
W54220
Air Grease Gun operating pressure 30-150psi
Professional Grease Gun, comfort grip handle, short stroke lever action for
easy use in tight areas, air bleeder valve eliminates air lock
Economy Grease Gun for light duty applications, short stroke lever action for
easy use in tight areas
Pistol grip grease gun, comfort grip handle, air bleeder valve eliminates air
lock, 2-way filling
Mini Grease Gun with 3oz grease cartridge, pistol grip action, air bleeder
valve eliminates air lock
Suction gun that holds up to 18 ounces of fluid, 12” flex hose, needs no
priming, perfect for draining differentials, clutches, & transmissions
30-480
30-475
30-100
30-200
LUBRICATION EQUIPMENT
30-118GS
G100
30-100
30-118GS
30-192
30-200
30-300
30-475
30-480
Economy Pistol mini grease gun, grease gun allows for front or top pipe
attachment, takes 3oz cartridge or can be suction loaded, includes 5-1/2”
straight pipe & standard coupler
Suction gun, designed for draining & filling non-corrosive liquids, barrel
holds approximately one pint with 9” stroke, comes with 12” hose
Heavy duty pistol grip mini grease gun with tube of multi-purpose grease,
grease gun allows front or top pipe attachment, takes 3oz cartridge or
can be suction loaded, die cast T-handle that locks in place for loading,
includes 5-1/2” straight pipe & standard coupler
Standard duty lever grease gun, uses standard 14oz grease cartridge,
develops up to 6,000psi, delivers 1oz of grease/40 strokes
Standard duty lever grease gun, 2-way loading, 14oz grease cartridge
or bulk load, head cap port for adding air bleeder or bulk loader fitting,
develops up to 5,000psi, includes 3-1/2” tube and standard coupler
Professional grease gun, variable/short stroke for use in confined areas,
3-way loading, develops up to 10,000psi & delivers 1.8oz of grease/40
strokes, includes 5-3/8” pipe and standard coupler
Ultimate grease gun, equipped with 10” grease pipe, HD coupler, longer
lever, barrel & lever comfort grips, air bleeder valve, 3-way loading,
develops up to 10,000psi, delivers 3.33oz of grease/40 strokes
G100
G102‘
G110
G112
G120
G150
Lever action grease gun, steel block head and hardened steel plunger,
heavy duty steel barrel, posi-lock follower rod with T-handle provides
sure-handed grip & filling at any position
“The Bulldog” premium lever action grease gun, nipple valve for 3-way
loading, bleeder valve allows purging of air from gun head
Mini pistol grip grease gun, zinc die cast head, uses 3oz grease cartridges
Heavy duty pistol grip grease gun, heavy duty steel barrel, posi-lock follower
rod with T-handle provides sure-handed grip & filling at any position, rigid
extension with coupler
Air operated pistol grip grease gun, 3-way loading, develops up to 4,800psi
operating Pressure, input pressure of 40-120psi
Suction gun that holds up to 18 ounces of fluid, 12” flex hose, needs no
priming, perfect for draining differentials, clutches, & transmissions
30-192
G112
G110
G120
G150
G102
100
Return To Quick Reference Index
LUBRICATION EQUIPMENT
GREASE GUNS / AIR GREASING SYSTEMS / GEAR LUBE
DISPENSERS
DD16
DD5
Mega Power™ 12 volt Battery operated Grease gun, delivers up to 8,000psi,
holds 14oz grease cartridge, cartridge or bulk loading, comes with two
batteries, fast charger, 30” flexible hose & carrying case
Air greasing system for 35lb drum of grease, 55:1 ratio pump, dispenses 2lbs
of NLGI-02 grease per minute, operating pressure from 40-145psi, includes
pump, drum cover, drum dolly, booster gun, follower plate & 12’ grease
hose
Air greasing system for 120lb drum of grease, 55:1 ratio pump, dispenses
2lbs NLGI-02 grease per minute, operating pressure from 40-145psi,
includes pump, drum cover, drum dolly, booster gun, follower plate & 12’
grease hose
Drum dolly for 5 gal drums
Drum dolly for 16 gal drums
Booster gun for air greasing systems, 10,000psi working pressure, 360°
swivel
Air greasing system for 120lb drum of grease, 55:1 ratio pump, dispenses
2lbs NLGI-02 grease per minute, operating pressure from 40-145psi,
includes pump, drum cover, booster gun, follower plate, ¼” x 50’ grease
reel, & grease system installation kit.
Air greasing system for 400lb drum of grease, 55:1 ratio pump, dispenses
2lbs NLGI-02 grease per minute, operating pressure from 40-145psi,
includes pump drum cover, drum dolly, control gun, follower plate & 12’
grease hose, control gun delivers greasing pressure at pump outlet
pressure
New oil delivery system for 120lb drum of oil, 1.1 ratio pump, max viscosity
SAE 140, max free flow of 16.4gpm, operating pressure of 40-140psi,
includes pump, pick-up tube, non-metered control gun, ½” x 20’ delivery
hose & installation kit
New oil delivery system for tank or drum of oil with short to medium
pipelines, 3:1 ratio pump, max viscosity SAE 140, max free flow of 8.5gpm,
operating pressure of 40-140psi, includes pump, pick-up tube, metered
control gun, ½” x 5’ delivery hose, ½” x 50’ oil reel and installation kit
Gear oil delivery system for 16gal drum, 3:1 ratio pump, max viscosity SAE
140, max free flow of 8.5gpm, operating pressure of 40-140psi, includes
pump, pick-up tube, metered control gun, ½”x 10’ delivery hose, drum
dolly, drum cover & installation kit
1:1 stub piston transfer pump, 16.4gpm free delivery, max viscosity of
SAE140, 40-140psi operating pressure, for new oil transfer
Non-metered control gun, angle rigid extension with non-drip nozzle, ½”
FNPT inlet, rated at 2,000psi, trigger guard and safety lock, max flow rate
of 4.4gpm
In-line electronic metered control gun, 14” flexible extension with non-drip
nozzle, easy-to-read LCD display, meter can be converted to dispense in
pints, quarts, gallons, or liters & totalize in liters or gallons, meter display
powered by 3 volt lithium battery, operating pressure of 1,000psi, max flow
rate of 2.9gpm
L3510
L6100
L6000
LCG1-01
L6210
OS300
GS120
LCG90112
OS313
OS100
LCG90001
101
Return To Quick Reference Index
LUBRICATION EQUIPMENT
L1380
L6000
L6100
DD5
DD16
LCG1-01
GS120
L6210
OS100
OS300
OS313
L3510
LCG90001
LCG90112
L1380
OIL / GREASE / WATER REELS
87334
87354
L8515
L8525
815
87334
87354
87552
87754
½” x 30’ Metal oil reel includes reel, connecting hose, delivery hose and ball
stop
½” x 50’ Metal oil reel includes reel, connecting hose, delivery hose and ball
stop
¼” x 50’ Metal grease reel includes reel, connecting hose, delivery hose
and ball stop
½” x 50’ Metal water reel includes reel, connecting hose, delivery hose and
ball stop
L8515
L8520
L8525
L8535
¼” x 50’ Metal grease reel includes reel, connecting hose, delivery hose
and ball stop
½” x 30’ Metal oil reel includes reel, connecting hose, delivery hose and ball
stop
½” x 50’ Metal oil reel includes reel, connecting hose, delivery hose and ball
stop
½” x 50’ Metal water reel includes reel, connecting hose, delivery hose and
ball stop
GREASE GUN ACCESSORIES
5812
5803
5845
LUBRICATION EQUIPMENT
5852
5883
815
5803
5812
5818
5845
5852
5883
11659
58000LIN
81387
58000
Lincoln style ¼” air coupler
Needle nozzle for flush type or hard to reach grease fittings
12” grease hose for manual or air operated grease guns, 1/8” NPT, coil
spring to prevent kinking, 4,500psi max working pressure
18” grease hose for manual or air operated grease guns, 1/8” NPT, coil
spring to prevent kinking, 4,500psi max working pressure
Heavy duty hydraulic grease coupler end, 7,500psi max operating pressure,
1/8” OD
Standard hydraulic grease coupler end, 7,500psi max operating pressure,
small outside diameter permits easy contact with recessed fittings, built-in
ball check
90° grease coupler provides an efficient way to grease fittings in tight areas,
fits all standard 1/8”NPT grease hoses, 1,000 max operating pressure
Lincoln Style ¼” air nipple
7pc Heavy duty Lube accessory kit, includes 1ea of the following: press-on
90° angle adapter (5859), straight extension for recessed fittings (5855),
12” whip hose, coupler & locking sleeve (81795), 90° grease coupler
(5883), rubber tipped nozzle for u-joints & spindles (83278), needle
nozzle with extension & locking sleeve(82784), 360° coupler for full swivel
with extension tube & locking sleeve (5849) and a blow mold case for
storage
Universal high pressure swivel, ½”-27M x ¼”NPTM
11659
102
Return To Quick Reference Index
81387
GREASE GUN ACCESSORIES
W54213
W54212
W54216
W54212
W54213
W54216
W54219
W54221
W54222
W54223
W54224
W54225
W54226
W54227
Standard grease gun coupler
Grease injector needle that attaches to standard coupler
4” needle nose adapter
Needle nose adapter
Standard 12” grease hose for hand operated grease guns, 1/8”NPT,
3,000psi working pressure
Standard 18” grease hose for hand operated grease guns, 1/8”NPT,
3,500psi working pressure
Standard 12” grease hose with spring, 4,500psi working pressure
Heavy duty grease coupler
90° swivel coupler
360° swivel coupler
90° angle coupler
W54221
W54222
W54223
W54225
G300
G212
G218
G300
Standard 12” grease hose for hand operated grease guns, 1/8”NPT,
3,500psi working pressure, 14,000psi burst pressure
Standard 18” grease hose for hand operated grease guns, 1/8”NPT,
3,500psi working pressure, 14,000psi burst pressure
Standard grease coupler, 1/8”NPT
W54226
G212
G218
05-031
05-031
05-037
10-212GS
10-219GS
Standard grease gun coupler
Grease injector needle that attaches to standard coupler
Heavy duty 12” grease hose for hand operated grease guns, 3,000psi
working pressure, 12,000lb burst pressure, heavy duty brass end fittings,
1/8”NPT
Heavy duty 18” grease hose for hand operated grease guns, 3,000psi
working pressure, 12,000lb burst pressure, heavy duty brass end fittings,
1/8”NPT
7pc Heavy duty Lube accessory kit, includes 1ea of the following
needle adapter, whip hose with quick disconnect & heavy duty
coupler, recessed quick disconnect lube adapter, rubber tipped
quick disconnect seal-off dispenser, 1.5” narrow needle quick disconnect adapter, right angle quick-disconnect adapter, 90°
quick-disconnect adapter, & a cloth roll-up carrying case
8090
103
Return To Quick Reference Index
LUBRICATION EQUIPMENT
10-219GS
10-212GS
8090
05-037
OIL LIFT DRAINS
OIL EVACUTION DRAINS
11102
17432
2400-20
2400-45
LUBRICATION EQUIPMENT
2400-19
11102
17432
17442
8gal Polyethylene Oil Lift Drain, working range from 36-1/2”-74”, low
center of gravity to increase stability, four 2-/2” ball bearing swivel wheels,
heavy duty adjustment clamp, large handle and big pour spout with
threaded cap, large 15” funnel with built-in strainer to catch drain plugs,
translucent for oil level viewing
18gal Polyethylene Oil Lift Drain, working range from 36-1/2”-77”, four
heavy duty 2-1/2” wheels, drains from bottom with a brass drain valve,
large 15” funnel with built-in strainer to catch drain plugs, translucent for
oil level viewing
Oil Pump Kit for pumping out # 17432 18gal oil lift drain
2400-19
2400-20
2400-45
2400-68
2400-26
2400-79
932409IP
18gal Polyethylene Oil Lift Drain, working range from 48”-71”, four ball
bearing casters, spout for evacuation, ¾” evacuation valve, hand grips on
bottom & top, translucent for oil level viewing
8gal Polyethylene Oil Lift Drain, working range from 48”-71”, four ball
bearing casters, hand grips on bottom & top, spout for evacuation,
translucent for viewing oil level
6gal Polyethylene Oil Lift Drain, working range from 48”-67”, four ball
bearing casters, ¾” pour spout for oil evacuation, hand grips on bottom
& top, translucent for oil level viewing
30gal Polyethylene Oil Lift Drain, working range from 55”-78”, four heavy
duty casters, 2 fixed and 2 swivel, ¾” evacuation valve, 18” black
polyethylene funnel, oval shape for easy movement in shop, translucent
for oil level viewing
Oil Pump Kit for pumping out # 2400-19, # 2400-68 & # 2400-79
16gal Oil Buddy, polyethylene construction, working range from 50”-72”,
molded handle and 2 semi-pneumatic wheels to ensure proportioned
balance & ease in movement, 2” non-corrosive tube with 18” funnel,
drains through ¾” faucet drain or optional pump kit, translucent for oil
level viewing 28gal Oil Lift Caddy, molded in baffle for strength & durability, working
range 47”-72”, molded in handle, 2 pneumatic tires with nylon bearings,
18” diameter funnel, ¾” faucet drain, translucent for easy oil level viewing,
comes with industrial grade pump and 10’ extension hose with ¾” NPT
fittings
932409IP
2400-79
2400-68
104
Return To Quick Reference Index
OIL LIFT DRAINS
OIL EVACUTION DRAINS
75-838
75-837
75-838
8890
5gal Metal Oil Lift Drain, working range from 40-1/2”-60”, comes with a
13 1/2” diameter funnel
Cross frame style lift drain dolly with four casters for the # 75-837
75-837
8890
613
3605
3614
24 gallon Waste Oil drain with Pressurized Evacuation, 6’ drain hose,
tank-mounted pressure regulator, oil-level sight gauge and tool tray,
working range 54”-79”, 15-3/4” diameter drain funnel with 24” funnel
adapter, heavy duty wheels & casters
Standard oil drain used with 16gal drum(not included), float gauge shows
when drum is full, working range from 42-34”-70”, 17” square rolling base
with 2-1/2” ball bearing caster wheels, 14” drain bowl
Pedestal-style Oil drain, latch trigger automatically locks drain bowl at any
height, bowl cover lid hinged for splash guard extends to catch oil flowing
from hard to reach drain plugs, spring actuated valve in drain bowl to
prevent leakage, includes drain adapter bushing for draining bowl, 13-1/2”,
4-1/2gal bowl
20gal Oil drain with Pressurized Evacuation, working range from 44”-72”,
18” offset bowl easily catches fluid without repositioning tank, sight level
gauge for fluid monitoring, air regulator for use with shop air for
evacuation, tank pressure relief valve, 74” discharge hose
3605
105
Return To Quick Reference Index
LUBRICATION EQUIPMENT
613
3614
DRAIN PANS / LOW BOY OIL DRAINS
5077
17942
5077
17gal Transfer Tanker, only 9-1/2” tall, used for draining oil or antifreeze
from large displacement engines, pull along handle, electric pump with 8’
transfer hose that pumps 5gpm, has 4-5” free wheeling casters, 42” in
length & 24” wide
17922
17952
17922
17942
17952
19122
19852
19122
19852
30qt Multi-Drain tub, heavy duty, all purpose plastic drain tub for draining
radiators, transmissions, crankcases, or differentials on cars & trucks,
designed for easy pouring & disposal, apron facilitates washing & sorting
parts, 33” x 22” x 8”
4.5gal Black Oil drain pan, 1” diameter pour spout, anti-splash lip & baffles
help prevent spilling when carrying or pouring, large easy to grip handles
4.5gal Green Antifreeze drain pan, 1” diameter pour spout, anti-splash lip &
baffles help prevent spilling when carrying or pouring, large easy to grip
handles
Truck drain on wheels, holds 60qt, equipped with 4 rollers & handle for
transport & positioning under trucks, sides curve inward to prevent
spillage during movement, convenient handles & pour spout facilitate oil
evacuation, 43” x 24-1/2” x 10”
Truck & Trailer wheel pan, catches oil from wheel hubs after removing cap,
pan fits rims with 13-3/4”ID & larger, handle compartments hold hub nuts
out of the oil, made of polypropylene, will not wrap if oil is warm, holds 88
ounces
75-751
75-760
11845
75-751
75-760
11838
3.5 gal Galvanized steel utility drain pan, 16” x 4”
6qt Plastic drain pan with pouring lip, 13” x 4”, 10 per pack
5070
LUBRICATION EQUIPMENT
11837
2400-36
2400-34
5070
11837
11838
11845
7.5 qt Plastic Drain pan with pouring lip, 12 per pack
10qt Plastic Oil Drain pan, molded hand grips for carrying & pouring, screen
that helps drain plugs from getting lost in oil, screw on/off top cap, 6 per
pack
15qt Plastic Oil Drain pan, molded handle for convenient carrying, pouring
& storage, vent cap for pouring, top lid cover, 4 per pack
5gal Plastic Oil drain, molded handle for convenient carrying & pouring,
anti-splash lip to help contain liquid when pouring, pour spout with cap,
4 per pack
2400-34
2400-36
2400-37
17gal Low Boy Oil drain, made of heavy duty polyethylene & translucent
for easy viewing of fluid level, can be used with antifreeze also, 4
recessed casters to protect from damage while moving around shop,
gravity drain valve or add optional 115 volt evacuation kit, wire screen in
pan to prevent foreign matter from entering reservoir
115 Volt evacuation kit for # 2400-34
17gal Low Boy Oil Drain with 115 volt evacuation kit
2400-37
106
Return To Quick Reference Index
LIQUID / FLUID TRANSFER PUMPS
1335L
1335L
Lever action fluid pump, works with non-corrosive fluids such as motor oil,
transmission fluid, engine coolant, gear oil, diesel oil, fuel oils, mineral oil,
glycols, brake fluid, hydraulic oils, silicone oils & much more, internal
brass rings that won’t shrink or harden, telescoping tube for 16-55gal
drums with 2” bung opening, bung opening tool built into pump head,
internal check valves, delivers 8.5oz per full stroke
G400
G401
Lever action bucket pump fits 25-50lb buckets, comes with 18” drum cover,
4’ delivery hose, perfect for transferring transmission fluids & gear lube
Lever action barrel pump, fits 30-55gal drums, delivers 10oz per stroke,
includes standard bung bushing, curved metal spout threaded to fit all
garden hoses, for fluids such as edible oils, heating oil, lacquer thinner,
motor oils, soaps, solvent thinners & transmission fluids
17500
Pail pump fits 5 & 6 gallon pails, dispenses fluid with lift action, for use with
all non-corrosive liquids, seals designed for use with thinners.
G400
G401
17500
55-440
55-123
55-123
55-150
55-440
Lever action barrel pump, fits 30-55gal drums, delivers 10oz per stroke,
includes standard bung bushing, curved metal spout threaded to fit all
garden hoses, for fluids such as edible oils, heating oil, lacquer thinner,
motor oils, soaps, solvent thinners & transmission fluids
Rotary Barrel Pump fits 5-55gal drums, Ryton® construction with Teflon®
seals, delivers 7 gallons per 100 revolutions, for use with acids, alkalines,
gas, diesel, machine oil, water, alcohol, thinners & petroleum-based
products
Lever action bucket pump fits 25-50lb buckets, comes with 18” drum cover,
4’ delivery hose, perfect for transferring transmission fluids & gear lube
55-150
7201MV
7300MV
7400MV
Fluid Evacuator Plus, evacuates or dispenses at the push of a button,
manual pump operation, integrated 2.3gal (8.8 liter) capacity reservoir,
large base with foot stabilizer, automatic overflow prevention, quick-drain
pour spout, 0.23”OD x 5’ dipstick tube, 0.26”OD x 5’ dipstick tube,
0.41”OD x 5’ main evacuation tube & tube adapters
PneumatiVac, operates on compressed air to create a powerful venture
vacuum for draining fluids from tanks & reservoirs, includes accessories
for draining engine oil & transmission fluid through dipstick tubes,
integrated 2.3gal (8.8 liter) capacity reservoir, large base with foot
stabilizer, automatic overflow prevention, quick-drain pour spout, 0.23”OD
x 5’ dipstick tube, 0.26”OD x 5’ dipstick tube, 0.41”OD x 5’ main
evacuation tube, brake/clutch bleeding adapter kit & tube adapters
Fluid Evacuator, vacuum is created by manual pump operation, integrated
1.9gal (7.3 liter) capacity reservoir, large base with foot stabilizer,
automatic overflow prevention, quick-drain pour spout, 0.23”OD x 5’
dipstick tube, 0.26”OD x 5’ dipstick tube, 0.41”OD x 5’ main evacuation
tube & tube adapters
107
Return To Quick Reference Index
7201MV
7400MV
LUBRICATION EQUIPMENT
7300MV
W1145
W54232
SD62
FR112
FR152
FR610C
FR1210C
FR700
SD1202
LIQUID / FLUID TRANSFER PUMPS
W1145
W54232 Multi-Use Transfer Pump, will not corrode or rust
Lever action bucket pump fits 25-50lb buckets, comes with 18” drum cover,
4’ delivery hose, perfect for transferring transmission fluids & gear lube
FR112
FR152
FR610C
FR700
FR1210C
SD62
SD1202
6U075
807CMK
Heavy Duty Rotary Hand Pump with flow rate of 10 gallons per 100 revolutions, 1”NPT inlet, ¾”NPT outlet, can be used with gasoline, diesel fuel, light oils, & most non-corrosive petroleum based fluids
Heavy Duty Piston Hand Pump with flow rate of 20 gallons per 100 strokes, 1”NPT inlet, ¾”NPT outlet, can be used with gasoline, diesel fuel, hydraulic
oil, and non-corrosive petroleum based fluids
Heavy Duty 115 Volt AC Fuel Transfer Pump, flow rate of 15gpm, 1”NPT
inlet, ¾”NPT outlet, ¾” x 12’ hose, ¾” manual nozzle, can be used with
diesel fuel, gasoline, kerosene, mineral spirits, stoddard solvent & heptane
Heavy Duty 115 Volt AC Fuel Transfer Pump, flow rate of 20gpm, 1”NPT
inlet, ¾”NPT outlet, ¾” x 12’ hose, ¾” manual nozzle, can be used with
diesel fuel, gasoline, kerosene, mineral spirits, stoddard solvent & heptane
Heavy Duty 12 Volt DC Fuel Transfer Pump, flow rate of 15gpm, 1”NPT inlet,
¾”NPT outlet, ¾” x 12’ hose, ¾” manual nozzle, can be used with diesel
fuel, gasoline, kerosene, mineral spirits, stoddard solvent and heptane
Standard Duty Rotary Hand Pump with flow rate of 8.5 gallons per 100
revolutions, 1”NPT inlet, 1” O.D. spout outlet, can be used with light
viscosity oils, gasoline, diesel fuel, & non-corrosive fluids
Standard Duty 12 Volt DC Fuel Transfer Pump, flow rate of 13gpm, 1”NPT
inlet, ¾”NPT outlet, ¾” x 10’ hose, ¾” manual nozzle, can be used with
diesel fuel, gasoline, kerosene, and mineral spirits
¾” Manual Nozzle Replacement
Series 800 Meter Kit for AC & DC Pumps, mechanical meter with accuracy
of +/- 1%, flow rate of 5 to 20gpm, pressure rating of 50psi, resetable
cumulative totalizer of 99.9gal, master totalizer of 99,999.9gal, compatible
with diesel fuel, gasoline, kerosene, mineral; spirits, stoddard solvent &
heptane
OILERS
75-444
75-442
6U075
LUBRICATION EQUIPMENT
807CMK
75-665
75-668
75-441
75-442
75-444
75-665
75-668
1qt Galvanized measure, easy grip handle, calibrated fill line, flexible spout
with ½”OD tip
2qt Galvanized measure, easy grip handle, calibrated fill line, flexible spout
with ½”OD tip
4qt Galvanized measure, easy grip handle, calibrated fill line, flexible spout
with ½”OD tip
5qt Painted measure, easy grip handle, thumb operated valve controls flow,
flip action locks valve open, 14” flexible metal spout with ½”OD tip opening
8qt Painted measure, easy grip handle, thumb operated valve controls flow,
flip action locks valve open, 14” flexible metal spout with ½”OD tip opening
19732LS
19752LS
6qt Translucent polyethylene Oil Dispenser, marked in both quarts & liters,
8” flexible white spout
6qt Translucent polyethylene Oil Dispenser, marked in both quarts & liters,
8” flexible red spout
19732LS
19752LS
W241
W242
W241
W242
¼ Pint pump oiler with flexible spout & brass pump
3/4 Pint pump oiler with flexible spout & brass pump
108
Return To Quick Reference Index
FUNNELS
17892
17902
17902
Transmission Drain Funnel, heavy duty plastic funnel extends the area of
any lift drain, if run over it will return to original shape, funnel catches
loose parts, 22” x 23”
Super Transmission Drain Funnel, super funnel fits Ford E 40D & other
larger transmissions, heavy duty plastic funnel extends the area of any lift
drain, if run over it will return to original shape, funnel catches loose parts,
24” x 36”
75-008
75-008
75-074
17892
8qt Steel Galvanized lock-on Tractor funnel, 11-1/2” total height, 10” diameter,
1-1/4”OD tip with screen & tabs
Two piece funnel with flexible spout, 12” detachable funnel, 15” overall length,
6” diameter with ¾”OD tip
5007
75-074
5015B
5064
6064B
5007
5015B
5034
5064
5090B
6064B
11881
1/2pt Plastic funnel, 12per pack
1pt Plastic funnel, 12per pack
18” Long neck plastic funnel, 12per pack
1qt Plastic funnel, 12per pack
Long neck specialty plastic funnel, 12per pack
Plastic Transmission funnel, 12 per pack
Plastic flex funnel with flexible spout, 12per pack
5034
5090B
WHEEL BEARING PACKERS
11881
2775
Self contained wheel bearing packer, packs up to 50 to 60 bearings without
refilling, transparent, impact resistant cup allows grease level check, use
on all cage-type roller or ball bearings up to 2” bore
34550
65250
Handy Packer® Bearing Packer works on bearings up to 3-1/2”OD, to pack
bearing, place the bearing on the piston, press down on the cap until the
old grease is forced out of the bearing & the new grease shows on top of
the bearing
Universal Bearing Packer, place the bearing between the two plastic cones,
tighten and apply grease through the grease fitting on the end of the
threaded shaft, injects grease evenly, cone diameter of 4-1/2”
W1218
Universal Bearing Packer, place the bearing between the two plastic cones,
tighten & apply grease through the grease fitting on the end of the threaded
shaft, injects grease evenly, cone diameter of 4-1/2”
109
Return To Quick Reference Index
34550
65250
W1218
LUBRICATION EQUIPMENT
2775
OIL FILTER WRENCHES
OIL FILTER PLIERS
W177C
W176
W176
W177C
W181C
W182C
W186C
W187C
W54310
W54311
W187C
W181C
Swivel Oil Filter Wrench, vinyl grip handle, range 3-1/2”-3-7/8”
Swivel Oil Filter Wrench, vinyl grip handle, range 2-7/8”-3-1/4”
Heavy Duty Oil Filter Wrench, vinyl grip handle, automatic clamping action,
studded band for positive grip, range 2-7/8”-3-1/8”
Heavy Duty Oil Filter Wrench, vinyl grip handle, automatic clamping action,
studded band for positive grip, range 3-5/8”-3-15/16”
Adjustable Oil Filter Wrench, vinyl grip handle, automatic clamping action,
range 2-1/2”-3-7/8”
Swivel Oil Filter Wrench, vinyl grip handle, range 3-1/2”-3-7/8”
Oil Filter Wrench Pliers, comfort grip handles, safety button locks in place,
three positions, range 2-1/4”-3-1/2”
Oil Filter Wrench Pliers, comfort grip handles, safety button locks in place,
three positions, range 3-1/4”-4-1/2”
W54310
W182C
W186C
W54311
G700
G700
G701
G702
Swivel Grip Oil Filter wrench, working range 3-1/2”-3-7/8”
Swivel Grip Oil Filter wrench, working range 2-7/8”-3-3/16”
Universal Strap Oil Filter wrench will handle filters up to 6”, use with ½”dr
ratchet
LUBRICATION EQUIPMENT
G701
4560
4561
G702
4560
4561
6968
6969
7062A
Adjustable Oil Filter Pliers, plastic handgrips, slip joint & lock mechanism,
13-1/2” in length, working range 2-1/4”-5”
Adjustable Oil Filter Pliers, plastic handgrips, slip joint & lock mechanism,
18 in length, working range 3-3/4”-7”
12” Ratcheting Chain wrench, working range ½”-4-1/2”OD
24” Ratcheting Chain wrench, working range 3”-6-1/2”OD
Universal Strap Oil Filter wrench will handle filters up to 6”, use with 3/8”dr
ratchet
6969
6968
110
Return To Quick Reference Index
OIL FILTER WRENCHES / OIL FILTER PLIERS
54920
50750
14500
50950
14700
14500
14700
50750
50950
53000
53100
53200
53250
53400LS
53500
53700
53900
54200LS
54300
54400
54700
54740
54780
54800
54920
63250
63500
63600
53000
Oil / Fuel Filter Wrench for 6.0L Ford Diesel, low profile fits both the 35mm &
36mm fuel & oil filters, use with 3/8”dr ratchet, not for use with impact
wrench
Oil Filter Wrench for 2.2L GM engines, low profile 1-1/4” socket designed for
operating clearance, use with 3/8”dr ratchet, not for use with impact wrench
Slip Joint Oil Filter pliers, sure grip teeth, cushioned handles, 2-1/4”-4” range
Slip Joint Oil Filter pliers, sure grip teeth, cushioned handles, 3-5/8”-6” range
Oil Pan Plug wrench for GM removes the 3-1/4” drain plug on GM four
cylinder cars where the filter is in the pan, works where the original plug
has been rounded off, use with ½”dr ratchet
Adjustable Oil Filter Wrench for trucks & tractors, range from 4-3/8”-5-5/8”,
use with ½”dr ratchet
Swivel Grip Oil Filter Wrench for John Deere, working range 4-3/4”-5-3/16”
Large Swivel Grip Oil Filter Wrench, working range 4-1/8”-4-1/2”
Universal 3” Oil Filter wrench, works in the tightest spots, use with 3/8”dr
ratchet
Standard Swivel Grip Oil Filter wrench, working range 3-1/2”-3-7/8”
Small Swivel Grip Oil Filter wrench, working range 2-7/8”-3-1/4”
Straight Handle Oil Filter Wrench, 1” stainless steel band, working range
3-1/2”-3-7/8”
Swivel Grip Oil Filter wrench for Cummins & Detroit Diesel, working range
4-5/16”-4-3/4”
Swivel Grip Oil Filter wrench for Caterpillar, working range 5-1/4”-5-3/4”
Small swivel grip Oil Filter / Fuel Filter wrench, narrow band for tight spots,
working range 2-3/8”-2-5/8”
End Cap Oil Filter wrench, fits 65mm & 67mm filters with 14 flutes
End Cap Oil Filter wrench, fits 74mm & 76mm filters with 15 flutes
End Cap Oil Filter wrench, fits 93mm filters with 15 flutes
End Cap Oil Filter wrench, fits 93mm filters with 36 flutes
End Cap style Oil Filter wrench set, contains 10 3/8”dr cap wrenches, 1 ea of
the following: 65/67mm w/14 flutes, 68mm w/14 flutes, 74/76mm w/15
flutes, 76mm w/14 flutes, 76mm w/30 flutes, 80mm w/ 15 flutes, 86mm
w/16 flutes, 93mm w/15 flutes, 93mm w/36 flutes, 100mm w/15 flutes & a
plastic storage case
Steel Jaw Filter wrench, working range 3-1/8”-3-7/8”, use with 3/8”dr ratchet
Big Range Strap type Filter wrench for filters up to 6”, use with ½” or ¾”
ratchet
Steel Jaw Filter wrench, working range 2-1/2”-3-1/8”, use with 3/8”dr ratchet
53100
53200
63500
53250
53400LS
63250
53900
63600
54200LS
70-535
70-889
Standard Oil Filter wrench, fixed handle with vinyl grip,
working range 2-9/16”-3-1/8”
Large Oil Filter wrench, fixed handle, epoxy finish, working range 3-1/2”-3-7/8”
70-535
111
Return To Quick Reference Index
LUBRICATION EQUIPMENT
54700
54400
OIL FILTER WRENCHES / OIL FILTER PLIERS
190
192
2029
2010KD
2187
2320KD
2321KD
2322KD
2595
2790
2991
3082
3083
3253
3149
3288
3324
3368
LUBRICATION EQUIPMENT
3369
3508
3526
3527
190
192
2010KD
2029
2187
2320KD
2321KD
2322KD
2595
2790
2991
3082
3083
3149
3253
3288
3324
3368KD
3369KD
3508
3526
3527
3529
3860KD
3861
3862
3863
3864
3865
3932
3933
3934
3941
3942
3943
3944
41830
Universal Oil Filter wrench, band will not crush or bend filter, working range
3-7/16”-3-3/4”
Fuel & Oil Filter wrench, working range 2-1/4”-2-9/16”
Truck & Tractor Oil Filter wrench, working range 4”-4-3/8”
3/8” square drive Oil Filter wrench, working range 3-7/16”-3-3/4”
Adjustable Oil Filter wrench with notched link set to 1 to 3 positions, working
range 2-3/4”-3-3/4”
Heavy Duty Truck Oil Filter wrench, 3” wide band, fits Ford 6.9L diesel oil &
fuel filters & most Mack oil filters, working range 4-1/8”-4-21/32”, use with
½”dr ratchet
Heavy Duty Truck Oil Filter wrench, 3” wide band, working range 4-21/32”
5-5/32”, use with ½”dr ratchet
Heavy Duty Truck Oil Filter wrench, 3” wide band, working range 5-5/32”-5
21/32”, use with ½”dr ratchet
Chain Wrench used with ½”dr ratchet, chain length 16-1/4”, working range
5/8”-5”
3” End Cap Oil Filter wrench, fits 76mm with 15 flutes, use with 3/8”dr
ratchet
3-3/4” End Cap Oil Filter wrench, fits 95mm with 15 flutes, use with 3/8”dr
ratchet
Swivel Grip Oil Filter wrench, plastic handgrip, working range 3-1/2”-3-7/8”
Swivel Grip Oil Filter wrench, plastic handgrip, working range 2-7/8”-3-1/4”
Nylon Strap Oil Filter wrench, use on filters up to 6”, use with ½”dr ratchet
65mm End Cap Oil Filter wrench with 14 flutes
Universal 3-jaw Oil Filter wrench, working range 2-1/2”-3-3/4”, use with 3/8”
ratchet
Swivel Grip Oil Filter wrench, plastic handgrip, working range 2-1/2”-3”
Fixed Range Oil Filter Pliers, plastic handgrips, working range 2-15/16”-3
5/8”
Fixed Range Oil Filter Pliers, plastic handgrips, working range 2-3/4”-3-1/8”
Adjustable Oil Filter Pliers, plastic handgrips, ratchet & lock mechanism
allows for multiple settings, working range 2”-5”
Ford 7.3L Fuel Cap Wrench, improves ability to remove & install caps
where access is a problem
Swivel Grip Oil Filter wrench, plastic handgrip, working range 3-7/8”-4-3/8”
Heavy Duty Oil Filter strap wrench, handles up to 9” filters, works with 3/8”
or ½”dr ratchets
65 / 67mm, 14 Flute Oil filter Cap Wrench
74 / 76mm, 15 Flute Oil Filter Cap Wrench
76mm, 14 Flute Oil Filter Cap Wrench
93mm, 15 Flute Oil Filter Cap Wrench
76 / 80 / 93mm, 36 Flute Oil Filter Cap Wrench
5pc Oil Filter Cap Wrench Set
32mm Oil Filter Socket Wrench
27mm Oil Filter Socket Wrench
36mm Oil Filter Socket Wrench
Pro Swivoil™ Filter Wrench, 180° swivel action, cushion grip, small
(64-76mm) filter diameter range
Pro Swivoil™ Filter Wrench, 180° swivel action, cushion grip, medium (73-83mm) filter diameter range
Pro Swivoil™ Filter Wrench, 180° swivel action, cushion grip, large
(89-99mm) filter diameter range
Pro Swivoil™ Filter Wrench, 180° swivel action, cushion grip, extra large
(96-111mm) filter diameter range
3pc Oil Filter Socket Set
3941
3529
3865
3863
3864
3933
3932
112
Return To Quick Reference Index
3934
OIL DRAIN PLUG SOCKETS
OIL DRAIN PLUG REPAIR
FILTER CRUSHERS
76000
58850
58850
76000
Oil Pan Plug Rethreading Kit removes damaged thread & taps a new
oversize thread, kit includes a piloted drill, spring-loaded tapping tool,
& 5 magnetic drain plugs, works on soft steel & aluminum oil pans with
½”, 12mm & 14mm- threads.
Oil Filter Crusher, operates on 90-150psi of shop air, crusher cycles in
25-30 seconds depending on air pressure & filter size, crushes filters up
to 5” in diameter & 7-3/4” in height removing 95% of free flowing oil, an
automatic valve kit is available to convert from manual to automatic
operation
1821
3870
3870
3871
7pc Drain Plug Socket Set, works with any 3/8”dr GearRatchet™ or standard
ratchet, includes 6 color-coded, magnetized sockets made of anodized
aluminum in the following sizes: 13, 14, 15, 16, 17, & 19mm
6pc GearWrench® Magnetic Oil Drain Plug Socket Set contains 13mm,
14mm, 15mm, 16mm, 17mm & 19mm
1875
3871
10 Ton Air Operated Oil filter crusher, can crush up to 4 automotive filters at a time (3-7/8”diameter x 9” high) in approximately 20 seconds, includes
mounting stand
25 Ton press operated Oil Filter crusher, will crush most automotive & light
truck filters up to 6” in length & 4” in diameter
25 Ton Air / Hydraulic Oil Filter crusher, automatic cycle feature, will crush
most automotive & light truck filters up to 6” long including Ford 6.9L &
7.3L diesel filters
25 Ton Air / Hydraulic Oil Filter crusher, automatic cycle feature, will crush
most heavy duty oil filters up 6” in diameter & 12-1/2” in length, includes
built-in floor stand
25 Ton High speed Electric / Hydraulic Oil Filter crusher, crushes automotive & heavy duty filters up to 15-1/4” long & 6” in diameter in 8 to 16 seconds, built-in heavy duty floor stand with leveling pads is designed to accept 30gal drum for oil drainage
113
Return To Quick Reference Index
LUBRICATION EQUIPMENT
1821
1874
1875
1877
1896
1874
1896
1877
GREASE FITTINGS
W5215
W54217
W54218
W54240
W54241
W54242
W54243
W54244
W54245
W54246
W54247
W54248
W5215
5490
70pc SAE & Metric grease fitting assortment containing 9 popular sizes:
¼ in straight, 45°, 90°, 1/8 in straight, 45°, 90°, & 6, 8, 10mm in straight
8pc SAE Grease fitting assortment
W54217
8pc Metric Grease fitting assortment
10pk ¼-28 Short straight Grease fittings
W54218
10pk 1/8-27 Long straight Grease fittings
10pk 1/8-27 45° Short Grease fittings
10pk 1/8-27 90° Long Grease fittings
10pk ¼-28 90° Short Grease fittings
10pk ¼-28 45° Short Grease fittings
10pk 6mm x 1 Straight Grease fittings
10pk 6mm x 45° Grease fittings
10pk 6mm x 90° Grease fittings
5191
5190
5191
5290
5291
5490
5491
KTI00023
10pk 1/8-27 Straight Grease fittings
10pk ¼-28 Short straight Grease fittings
10pk 1/8-27 45° Short Grease fittings
10pk ¼-28 45° Short Grease fittings
10pk 1/8-27 90° Long Grease fittings
10pk ¼-28 90° Short Grease fittings
5291
KTI00023
KTI00024
KTI00024
60pc SAE Grease fitting assortment contains: 20 ¼-28 straight, 15 ¼-28
45°, 15 ¼-28 90° and 10 ¼-28 long straight grease fittings
90pc Metric Grease fitting assortment contains 10ea of the following: 6mm
straight, 6mm-45°, 6mm-90°, 8mm straight, 8mm-45°, 8mm-90°, 10mm
straight, 10mm-45°, and 10mm-90°
LUBRICATION EQUIPMENT
638
610
641
610
613
637
638
641
688
613
100pk 1/8-27 Straight Grease fittings
50pk 1/8-27 90° Grease fittings
100pk ¼-28 45° Grease fittings
100pk ¼-28 90° Grease fittings
100pk ¼-28 Straight Grease fittings
50pk 1/8-27 45° Grease fittings
637
688
114
Return To Quick Reference Index