GX Microscopes Stereo Microscopes Range Datasheet

Transcription

GX Microscopes
Stereo Microscopes Range
How We Classify Stereo Microscopes
Stereo microscopes, also known as low magnification and dissecting microscopes
share a number of common, fundamental components. Examples of all these
components can be found in this range datasheet.
Pair of Angled Objectives, by definition all stereo microscopes have these, they are
typically hidden in the end/nose of the microscope, each objective connects to its
own eyepiece. Because they are angled they give a ‘3D’ or ‘Stereo’ view of the
subject.
Microscope Head, sometimes called the ‘body’ this accommodates all optical
components and any magnification changing mechanism. There are several types of
microscope head, this is the main way that different types of stereo microscopes are
classified, and priced, examples of all these types are included in this product range
datasheet.
The head types are:
o Single Magnification (to change magnification you have to
remove and insert different objectives and eyepieces) these are
the lowest priced microscope heads, the low price does not
necessarily mean that the image quality is less good. This type of
head typically has a rectangular objective holder.
o Dual Magnification sometimes called ‘Turret’ microscope
heads. In this type of microscope head there are 2 pairs of
objectives in the ‘nose’ of the microscope head. Each pair has
a different magnification eg 1x and 3X or 2x and 4X (total mags
10X/30X or 20X/40X with the std 10X eyepieces), to engage the
magnification required you rotate the nosepiece. Additional
magnifications can be obtained by also changing the
eyepieces. This class of microscope costs roughly 2X more than single
magnification microscopes.
o Zoom Magnification this is the most commonly purchased type of
stereo microscope. They are popular because you have a
continuous range of magnifications controlled by a zoom knob
eg 0.7X to 4.5X (total mags 7X to 45X with the std 10X eyepieces)
also, 1X to 10X (total mags 10X to 80X with the std 10X eyepieces)
and because you can also add auxiliary objectives eg 0.5X, 0.75X,
1.5X or 2X which change the zoom magnification range
proportionately and also alter the working distance. This type of
microscope can also have the largest range of illumination
accessories attached such as ring lights. You can also obtain
zoom microscopes with ‘trinocular heads’(T suffix) which gives the
user an additional vertical photoport onto which a camera can
be attached with the appropriate camera adapter. These
microscopes roughly cost 2X-4X more than dual magnification microscopes. In
summary zoom microscopes give the greatest range of magnifications,
working distances, photo options, accessories and are the most convenient to
use – no wonder they are popular!
Microscope Stand, the head attaches to the stand, some stands include builtin illumination, most include a focus mechanism. Sometimes the stand is
divided into 2 two further components:
1) the Focussing Ring – this holds the dual magnification and zoom
heads and has a rack & pinion focus mechanism, the focussing
ring attaches to the stand by either sliding onto a pole (or arbour)
or by fitting into an ‘E-Arm’ socket
2) The Microscope Stand onto which the focussing ring will connect,
there are numerous different types of stand such as long reach
stands, pillar stands, track stands, wall mounted stands and floor
stands.
Microscope Accessories such as:
Fibre Optics
Dual Gooseneck
Halogen/LED
Fibre Optics
Ring Light
Halogen/LED
Spot Lights
Halogen/LED
Ring Lights
LED
Ring Lights
Fluorescent
Light Panels
Fluorescent/LED
o
o
o
o
o
Illumination sources
Additional eyepieces & objectives
Attachable XY mechanical stages
Camera adapters
Cameras
GX Microscopes Stereo Microscope Range Overview
This table gives a brief overview of the product range with rankings for the key
parameters and a guide price range.
Type of
Microscope
Microscope
Model Range
XTX-1C
Single
Magnification
Dual
Magnification
Example
Microscope
from the Series
Summary of Key Parameters
Optical Quality
Field of View
Versatility
Working Distance
Typical Price Range GBP (excl VAT)
Optical Quality
Field of View
Image to Camera
Versatility
Working Distance

360-480
Optical Quality
Field of View
Image to Camera
Versatility
Working Distance

430-550
Optical Quality
Field of View
Image to Camera
Versatility
Working Distance

880-1000
Optical Quality
Field of View
Image to Camera
Versatility
Working Distance

1900-2500
C2-D
Optical Quality
Field of View
Versatility
Working Distance
ST50 series
Optical Quality
Field of View
Versatility
Working Distance
XTC Series
Ratiing

105-120

165-185

240-270

200-250
Optical Quality
Field of View
Versatility
Working Distance
Working
Distances
at standard
magnification
range (mm)
(with
Zoom
accessory
Ratio objectives)
not
zoom
not
zoom
Magnification(s)
Std
(with accessory
eyepieces &
objectives)
53
(53-22)
20X
(10X-120X)
230
(250-230)
10X
(2.5X-20X)
119
(124-165)
20X
(5X-70X)
88
Stands
Small Pillar Stand with Top
& Bottom Lights (on/off
only)
(No optional additional stands
available)
Boom Arm Stand with Top
Light (on/off only)
available)
Boom Arm Stand with Top
Light on articulated arm
(on/off only)
available)
Substantial Pillar Stand
10x/30X(XTCA) with Top & Bottom Lights
Adjustable Intensity
(10X-60X)
(Optional stands include, Arm
or
stands, Boom stands,
20x/40X(XTCB)
Articulated Arm Stands, Track
(20X-80X)
Stands & Wall Mount & Desk
Clamp Stands)
ZTX series
XTL Series
Continuous
Zoom
Magnification
MZS0745
Series
PS-T Series
4:1
6.4:1
85
(167-28)
88
(137-25)
10X-40X
(2.5X-160X)
7X-45X
(3.5X-220X)
6.4:1
118
(195-35)
7X-45X
(3.5X-270X)
10:1
91
(40-186)
8X-80X
(4X-360X)
Pillar Stand with Top &
Bottom Lights Adjustable
Intensity
(Optional stands include, arm
stands, boom stands,
articulated arm stands, track
stands & wall mount & desk
clamp stands)
with Optional Top &
Intensity
clamp stands)
with Optional Top &
Intensity
clamp stands)
(Optional stands include pillar
stand with lights, arm stands,
boom stands, articulated arm
stands, track stands & wall
mount & desk clamp stands)
Single Magnification
Microscopes
GX Microscopes SINGLE MAGNIFICATION
XTX, C2-D & ST50 MODELS
Specification Summary
This table gives a summary of the key features of each model in our range
GX Microscopes Single Magnification Microscopes
Type
Model
(all supplied as standard
with a pair of 10X
eyepieces)
(Product ID Code Shown in
Red)
Total Magnification
(with accessories)
Approx. Working
Distance (mm)
(with accessories)
Illumination
Direction
Lamp Type
Adjustability
Illumination options
Stand type
Stand options
Pillar
GXM XTX-1C (1276)
(Binocular Vertical
Head)
GXM C2-D (0842)
(Binocular 45deg Head)
10X
(10x-120X)
10X
(2.5X-20X)
53
(53-22)
Top & Bottom
Halogen
On/Off
230
(250-230)
Top
Incandescent
On/Off
- Fibre Optics
- Spot Lights
- Bottom Light
Panel
- Fibre Optics
- Spot Lights
- Bottom Light
Panel
- Fibre Optics
- Spot Lights
- Bottom Light
Panel
Single Mag
- Fibre Optics
- Spot Lights
Stereo
Microscopes
None
Boom Arm
None
Boom Arm
GXM ST50A (9036)
(Binocular Vertical
Head)
20X
(5X-70X)
119
(124-165)
Top
Incandescent on
gooseneck
On/Off
GXM ST50B (9037)
20X
(5X-70X)
119
(124-165)
Top
Incandescent on
gooseneck
On/Off
None
Boom Arm
None
G
Microscopes
product datasheet
XTX -1C
Stereo
Microscope
Specifications:
XTX-1C
Model:
Total Magnification
(ID 1276)
20X (expandable to 10X-120X with accessories)
Objective
2X (optional 1X, 3X, 4X, 6X)
Eyepieces
Pair WF10X (optional 15X, 20X)
Effective Working Distance
Illumination
Head & Stand
80mm
Transmitted light halogen lamp illuminated a frosted
glass insert in the stage. Halogen lamp top light.
Metal Stand with Vertical Pillar
Focus mechanism with rack and pinion gears
Interpupillary distance & diopter adjustment
•
Accessories
•
•
•
Eyepieces 15X and 20X (see accessories
table)
Objectives 3X, 4X, 6X (see accessories table)
Eyepiece microscope cameras
Additional illumination sources
Objectives
(pairs of angled
objectives mounted
in ‘slide-in’
cartridges)
Objectives increase
the magnification
and change the
working distance
Eyepieces
(pairs)
Eyepieces
increase the
magnification
but do not
change the
working distance
Optical Accessories Table for XTX-1C:
This table shows the working distances, magnifications & approximate
fields of view that can be achieved with the standard optics and with
the accessory eyepieces and objectives
Objectives
2X (Std)
Working Distance:
80mm
3X
4X
6X
(ID3546)
(ID3553)
(ID3560)
61mm
57mm
66mm
Total Magnifications & Field of View
Eyepieces
10X
(std)
20X (Std)
10.00mm
30X
6.7mm
40X
5.0mm
60X
3.3mm
15X
30X
7.5mm
45X
5.0mm
60X
3.7mm
90X
2.5mm
40X
6.5mm
60X
4.3mm
80X
3.2mm
120X
2.1mm
(ID3959)
20X
(ID5663)
Due to our policy of continuous
development specifications may
change without notice
The XTX-1C stereo microscope provides great
value for such high performance. These are
classed as single magnification microscopes
which can have a range of auxiliary objectives
and eyepieces inserted to achieve different
magnifications and working distances.
Each microscope is equipped with high quality
glass optics, a sturdy metal stand and built-in top
and bottom halogen lamp illumination.
The tough microscopes are designed for
observations
of
small
objects
such
as
entomological collections, pond dipping, plant
material, microfossils, rocks and industrial
inspection.
The simplicity of design and robustness of build
makes it particularly suitable for use by the young
enthusiast and in schools and colleges.
Every microscope is equipped with a pair of
objectives mounted in a removable, rectangular
objective cartridge and a pair of wide-field
eyepieces.
The binocular head is mounted on the focus
mechanism which, in turn is mounted on a
vertical pillar.
The head can be moved up the pillar to
accommodate larger specimens.
The head has interpupillary distance adjustment
and the left eyepiece has diopter adjustment.
This makes the microscope suitable for prolonged
use without undue eyestrain.
A highly popular choice for schools,
colleges & amateurs.
G
Microscopes
C-2D
product datasheet
Ultra-long
Working Distance
Stereo Microscope
2.5X-20X
45 deg Head
Specifications
Model:
The C-2D microscope is ideal for
those inspection tasks requiring
plenty of room between the
microscope and the object under
observation.
This microscope
includes a set of remarkable
objectives that give a 230mm
working distance expandable to
250mm.
C-2D
(ID 0842)
Head
45deg Angled Binocular Head with:
• adjustable interocular distance 55 - 75mm
• tiltable
• includes incident (top) built-in illumination
• long working distance objectives
• rack and pinion focus mechanism
Eyepieces
Two X10WF, left ocular has adjustable dioptre +/-5dp
Stand
• 257mm Horizontal Arm, 292mm High
• Heavy base for optimum stability
• High quality vertical and horizontal poles with
adjustable clamps
• Power supply in base with on/off switch
Eyepieces
5X
Objectives
(Working
Distance)
Mag
FOV
0.5X
(250mm)
2.5X
40mm
5X
40mm
10X
(Std)
(ID 3584)
Mag
15X
20X
(ID 3591)
(ID 3607)
FOV
Mag
FOV
Mag
FOV
5X
40mm
7.5X
30mm
10X
20mm
10X
20mm
15X
15mm
20X
10mm
(ID3577)
1X
(230mm)
(Std)
Options
Eyepieces
5X, 15X, 20X
Fibre Optics and LED Light sources (see separate GX
Extra Light
Microscopes Illuminators Datasheet)
sources
FOV = field of view diameter (max)
Mag = magnification to the observer
Objectives
(pairs of angled
objectives
mounted in ‘slidein’ cartridges)
Objectives
increase the
magnification and
change the
working distance
Eyepieces
(pairs)
Eyepieces
increase the
magnification
but do not
change the
working distance
The image presented to the observer is
clear, bright and sharp. For maximum
comfort the interocular distance is
adjustable and the left eyepiece allows
dioptre adjustment of up to +/-5dp.
In addition, the basic stand (included in
the price) allows you to adjust not only
the position but also the tilt angle of the
head. This means that the widest
number of people can use this
microscope
comfortably
over
prolonged viewing periods.
The
microscopes include a 12V 10W lamp
built into the head.
This microscope is compatible with GX
Microscopes’ illumination systems for
those requiring the greatest flexibility in
microscope positioning and object
illumination.
To record or display an image from this
microscope GX Microscopes’ digital
eyepiece cameras can be easily
attached.
This microscope has been specifically
designed for workplace environments
such as electronics assembly, jewellery
work,
component
checking
and
inspection
and
precious
stone
examination.
G
Microscopes
product datasheet
ST50 Series
Long Working Distance
Stereo Microscopes
5X-70X
ST50B 45deg Head
ST50A ‘Upright’ Head
45deg & ‘Upright’ Heads
Specifications
Model:
Head
Oblique Lamp
ST50A
ST50B
(ID9036)
(ID9037)
Upright ‘straight-through’ Head
45deg Angled Binocular Head
• adjustable interocular distance 55 - 75mm
• tiltable
• includes incident (top) built-in adjustable, articulated
illumination
• long working distance objectives
• rack and pinion focus mechanism
Eyepieces
Stand
Two X10WF, left ocular has adjustable dioptre +/-5dp
• 257mm Horizontal Arm, 292mm High
• Heavy base for optimum stability
• High quality vertical and horizontal poles with adjustable
clamps
• Power supply in base with on/off switch
Eyepieces
5X (fn18mm)
Objectives
(Working
Distance)
Mag
1X
(165mm)
5X
(ID 9175)
FOV
10X (fn20mm)
(Std)
Mag
FOV
40mm
10X
20mm
10X
20mm
20X
17.5X
11.4mm
35X
15X(fn13mm)
20X(fn10mm)
(ID 9176)
(ID 9177)
Mag
FOV
Mag
FOV
15X
15mm
20X
10mm
10mm
30X
7.5mm
40X
5mm
5.7mm
52.5X
3.8mm
70X
2.8mm
(ID9167)
2X (Std)
(119mm)
3.5X
(124mm)
(ID9168)
Options
Eyepieces
5X, 15X, 20X
Extra Light
sources
Fibre Optics and LED Light sources (see separate GX Microscopes
Illuminators Datasheet)
Cameras
Eyepiece tube cameras can be added for photography – see
our GXCAM Cameras range
FOV = field of view diameter (max)
Mag = magnification to the observer
fn= field number of the eyepieces
Objectives
1X & 3.5X
The ST50 series of single magnification
stereo microscopes are designed for
those
inspection
and
assembly/soldering tasks requiring plenty
of distance between the microscope
and the object under observation.
The fully coated, excellent optics give an
upright, non-inverted image over a wide
field of view which is sharp and clear.
These optics also reflect accurately the
original true colour of the view object.
Accurate alignment of the optics ensures the
observer can enjoy a fatigue-free viewing
experience over a long period of time.
The ST-50A model has an upright (straightthrough) binocular head with locked-in
eyepieces.
The ST-50B model has a 45º inclined binocular
head with locked-in eyepieces.
Both heads can be freely angled as required.
The left ocular-tube has a diopter adjustment
range of ± 5mm.
The
interpupillary
distance
adjustment
between the eyepieces is 55-75mm.
As standard a slide-in 2X objective with a
working distance of 119mm is supplied along
with a pair of 10X Widefield eyepieces which
combine to give a total magnification of 20X.
This magnification range can be expanded
to 5X to 70X using the range of optional
objectives and eyepieces shown in the table.
Objectives are easy to change using a
dovetail slide-in mechanism
Each stereo is supplied with a pair of rubber
eyeguards & a dust cover.
The stand has a well painted metal base with
steel vertical and horizontal arms
There is a precision, smooth focus system
using a rack & pinion mechanism.
The incident light is mounted on a ball-joint
and provides adjustable illumination.
The electrics are GS and CE approved.
This microscope is compatible with GX
Microscopes’ illumination systems for those
requiring the greatest flexibility in microscope
positioning and object illumination.
To record or display an image from this
microscope
GX
Microscopes’
digital
eyepiece cameras can be easily attached.
Dual Magnification
Microscopes
GX Microscopes DUAL MAGNIFICATION
XTC MODELS
Specification Summary
GX Microscopes Dual Magnification Microscopes
Type
Model
with a pair of 10X
eyepieces)
(Product ID Code Shown in Red)
Total Magnification
GXM XTC3A1(0774)
10X/30X
GXM XTC3B1(0798)
20X/40X
GXM XTC3A103A(0115)
10X/30X
GXM XTC3A103B(0116)
10X/30X
GXM XTC3A103C(0117)
Approx.
Working
Distance
(mm)
Illumination
Direction
Lamp Type
Adjustability
Illumination
options
Stand type
Stand options
Top & Bottom
Halogen/LED
Adjustable
Head will also fit into
boom arm & articulated
arm
Stands
10X/30X
None
GXM XTC3B103A(0119)
20X/40X
GXM XTC3B103B(0120)
20X/40X
GXM XTC3B103C(0121)
20X/40X
GXM XTCAH (7070)
Head & Eyepieces only
10X/30X
GXM XTCBH (4765)
Head & Eyepieces only
20X/40X
- Fibre Optics
- Spot Lights
88
Dual Mag
Stereo
Microscopes
None
Heads fit
84mm focussing rings on pillar,
arm, track, boom arm &
articulated arm stands
(necessary)
Boom Arm
GXM XTC3AV1(5540)
GXM XTC3BV1 (0122)
None
GXM XTC3AV6 (5557)
GXM XTC3BV6 (0123)
Dual Boom Arm
10X-30X (XTCA)
20X-40X (XTCB)
Head will also fit into Pillar
stands
Articulated Arm
GXM XTC3AV7(5564)
GXM XTC3AV7 (0124)
G
Microscopes
product datasheet
XTC Series
Dual Magnification
XTCAV1 & XTCBV1
XTCA103A
XTCB103A
Stereo
Microscopes
The XTC series of stereo microscopes are one of GX
Microscopes most popular ranges, they provide allround extremely high quality images at great value
prices.
XTCA103B
XTCB103B
XTCAV6 & XTCBV6
XTC3A1 & XTC3B1
XTCA103C
XTCB103C
XTCAV7 & XTCBV7
Specifications:
XTC3A1
(ID0774)
Model:
XTC3B1
(ID0798)
Total Mag
Objectives
10-30X XTC3A1
20-40X XTC3B1
1-3X XTC3A1
2-4X XTC3B1
XTCA103A
XTCB103A
XTCAV1
XTCBV1
(ID0115)
(ID0119)
(ID5540)
(ID0122)
XTCA103B
XTCB103B
XTCAV6
XTCBV6
(ID0116)
(ID0120)
(ID5557)
(ID0123)
XTCA103C
XTCB103C
XTCAV7
XTCBV7
(ID0117)
(ID0121)
(ID5564)
(ID0124)
10-30X
20-40X
10-30X
20-40X
1-3X
2-4X
1-3X
2-4X
WF10X (fn=20mm)
Eyepieces
Working
Distance
Illumination
88mm
Halogen lower
lamp, upper
halogen spot lamp
None – optional LED or halogen spot lamps and fibre optics – see GX
Microscopes Illuminators
XTCA103A
XTCB103A
103A Small Base Pillar Stand
Base Size (DxWxH) mm: 215x160x25
Focussing Ring ID: 84mm
Reversible black/white plate
Specimen Clips
Pillar Stand with
built-in illumination
Stand
Base Size (DxWxH) mm:
215x160x60
Opaque white insert
over transmitted light
Specimen Clips
XTCA103B
XTCB103B
103B Large Base Pillar Stand
XTCAV1
XTCBV1
V1 Boom Arm Stand
A substantial, stable long reach stand
Vertical Pole diameter: 38mm. Horizontal
Arm diameter: 38mm. Total height
450mm
Reach range: 276mm – 573mm
With rack & pinion fine extender at end
of horizontal arm
XTCAV6
XTCBV6
V6 Boom Dual Arm Stand
Arm diameters: 16mm each. Total height
410mm
Max. reach range: 370mm
XTCA103C
XTCB103C
XTCBV7
103C Small Base Pillar Stand with
X/Y mechanical Stage
V7 Articulated Arm Stand
Options
XTCAV7
XY Stage movement range: 42x42mm
Digital Eyepiece Cameras (See GXCAM Range)
There are two types of microscope head:
XTCA 1X/3X (giving 10X & 30X with the 10X Eyepieces)
XTCB 2X/4X (giving 20X & 40X with the 10X Eyepieces)
The binocular head is inclined at a comfortable 45º,
can be easily rotated through 360º, has
interpupillary distance adjustment and the left
eyepiece has diopter adjustment. This makes these
microscopes suitable for ergonomic use by the
greatest number of people.
The head of the microscope sits in a focussing ring,
this ring can be mounted on a very wide variety of
stands including pillar stands and long reach boom
arm & articulated arm stands.
In the XTC3A1 & XTC3B1 the illumination is built-in
with the stand providing both incident and
transmitted light.
Or with all other stands illumination can be provided
separately using LED or halogen spot or fibre optic
illuminators.
Each stereo is supplied with a pair of rubber
eyeguards, manual & a dust cover.
The stands have a well painted metal base with
steel poles. There is a precision, smooth focus system
using a rack & pinion mechanism.
The XTC Microscope range is highly versatile and is
an excellent low cost option for industry, hobbyists,
researchers and educational establishments.
Vertical Pole diameter: 38mm. 5
articulation points. Total height 450mm
Each microscope in the range is equipped with 2
pairs of angled objectives mounted in a revolving
nosepiece and a pair of wide-field eyepieces.
Each eyepiece links directly to one of the angled
objectives, this gives a stunning 3 dimensional
image of your specimen. The optical quality is very
high giving a very bright, crisp 3D image of the
specimen
XTC Head with
GXCAM Digital
Eyepiece Camera
attached
XTCAV6
Dual Arm
Microscope
Zoom Magnification
Microscopes
Including these ranges:
ZTX Economy Zoom
XTL Professional Zoom
MZS0745 Long Reach Professional Zoom
PS-T Professional Parallel Zoom
ZTX Economy Zoom Range
4:1 Zoom Ratio
Stereo Zoom Microscopes
GX Microscopes ZOOM MAGNIFICATION ZTX MODELS
Stereo Microscope Range Specification Summary
GX Microscopes
Zoom Magnification Microscopes
ZTX Series Models
Zoom Ratio:
Working Distance:
4:1
85mm (Std) with 10x eyepieces & no objective
(167-28mm with accessory objectives)
Zoom Magnification Range: 10x-40x (Std) with 10x eyepieces
(2.5x – 160x with accessory objectives & eyepieces)
Model
(all supplied as standard with a pair of 10X
eyepieces)
(Product ID Code Shown in Red)
Illumination
Direction
Lamp Type
Adjustability
Illumination
options
Stand type
Stand options
Dual Illuminated Pillar
(ZTX-T shown)
GXM ZTX (4680)
(Binocular)
Halogen Top - Fibre Optics
& LED Bottom - Spot Lights
Adjustable - Ring Lights
GXM ZTX-T (4567)
(Trinocular)
Small Base Pillar
GXM ZTX103A (9181)
(Binocular)
(Microscope head & eyepieces included but not
shown)
with reversible black/white insert and stage clips
GXM ZTX-T103A (9182)
Microscope Head, Eyepieces & Stand
(Trinocular)
Heads also fit
Large Base Pillar
GXM ZTX103B (9185)
(Binocular)
shown)
None
GXM ZTX-T103B (9186)
(Trinocular)
- Fibre Optics
- Spot Lights
- Ring Lights
(necessary)
GXM ZTX103C (9183)
(Binocular)
XY Stage Pillar
shown)
with mechanical XY stage
GXM ZTX-T103C (9184)
(Trinocular)
GXM ZTXH (4826)
(Binocular head & eyepieces only)
None
None
GXM ZTX-TH(5052)
(Trinocular head & eyepieces only)
Heads fit
(necessary)
G
Microscopes
product datasheet
ZTX Series
Zoom Stereo Microscopes
103A Stand used
in ZTX-103A &
ZTX-T103A
ZTX-V1
(shown with L1 Lamphouse and L3
fibre optic gooseneck illuminators)
103B Stand used
in ZTX-103B &
ZTX-T103B
V6 Stand used in ZTX-V6 & ZTX-TV6
ZTX-T
103C Stand used
in ZTX-103C &
ZTX-T103C
V7 Stand used in ZTX-V7 & ZTX-TV7
Specifications:
ZTX
(ID9187)
Model:
ZTX-T
(ID9188)
ZTX103A
ZTX-T103A
ZTXV1
ZTX-TV1
(ID9189)
(ID9190)
(ID0126)
(ID0129)
ZTX103B
ZTX-T103B
ZTXV6
ZTX-TV6
(ID9191)
(ID9192)
(ID0127)
(ID0130)
ZTX103C
ZTX-T103C
ZTXV7
ZTX-TV7
(ID9193)
(ID9193)
(ID0128)
(ID0131)
Total Mag
10X-40X (expandable to 2.5X-160X with optional accessories)
Objectives
Internal Zoom Objectives 1x-4X
Eyepieces
WF10X (fn=20mm)
Working
Distance
Illumination
85mm
Halogen lower
lamp, upper
halogen spot lamp
None – optional LED & fluorescent ringlights or halogen spot lamps or
fibre optics – see GX Microscopes Illuminators
ZTX103A
ZTX-T103A
Pillar Stand with
built-in dual
illumination
Specimen Clips
Approx Base Size
(DxWxH) mm:
215x160x60
Stand
95mm diameter frosted
glass insert over 12V
10W halogen
transmitted light
12V 10W Halogen spot
lamp
(some models may
have LED illumination)
Specimen Clips
ZTX103B
ZTXV1
ZTX-TV1
V1 Boom Arm Stand
450mm
of horizontal arm
ZTXV6
ZTX-TV6
ZTX-T103B
410mm
ZTX103C
ZTXV7
ZTX-T103C
ZTX-TV7
The ZTX series of stereo microscopes are GX
Microscopes’ best value zoom microscopes, they
provide all-round, high quality images at extremely
good value prices.
Each microscope in the range is equipped with a pair
of 1X-4X zoom objectives controlled by a zoom knob
and a pair of 10X wide-field eyepieces.
Each
eyepiece links directly to one of the angled zoom
objectives, this gives a stunning 3 dimensional image of
your specimen. The optical quality is very good giving
a bright, crisp 3D image of the specimen
ZTX with Binocular head
ZTX-T with Trinocular head for attaching a camera
Both models give 10X-40X zoom magnification range
with the 10X eyepieces, this magnification range can
be extended 2.5X -160X with the optional objectives
and eyepieces shown in the table.
The binocular eyepiece tubes are inclined at a
comfortable 45º.
The entire head can be easily
rotated through 360º, it has interpupillary distance
adjustment and both eyepiece tubes have diopter
adjustment. This makes these microscopes suitable for
ergonomic use by the greatest number of people and
assists in achieving parfocality when cameras are
attached.
The head of the microscope sits in a 76mm focussing
ring, this ring can be mounted on a very wide variety of
stands including pillar stands (eg 103A, 103B & 103C)
and long reach boom arm & articulated arm stands
(eg V1, V6 & V7).
Illumination is built-in with the stand providing both
incident and transmitted light. Alternatively, with all
other stands, illumination can be provided separately
using LED ringlights or LED & halogen spot or fibre optic
illuminators.
Each microscope is supplied with a pair of rubber
The stands have a well painted metal base with steel
poles. There is a precision, smooth focus system using a
rack & pinion mechanism.
The ZTX Microscope range is highly versatile and is an
excellent low cost option for industry, hobbyists,
researchers and educational establishments.
G
Microscopes
product datasheet
ZTX Accessories:
Magnification Table
ZTX Series
Eyepieces
Auxiliary
Objectives
Working
Distance
5X
10X
15X
20X
(ID9197)
(ID9198) (STD)
(ID9199)
(ID9200)
0.5X (ID9301)
167mm
2.5X-10X
5X-20X
7.5X-30X
10X-40X
0.75X (ID9302)
97mm
3.75X-15X
7.5X-30X
11.25X-45X
15X-60X
None (STD)
85mm
5X-20X
10X-40X (STD)
15X-60X
20X-80X
1.5X (ID9203)
42mm
7.5X-25X
15X-60X
22.5X-90X
30X-120X
2X (ID9204)
28mm
10X-40X
20x-80X
30X-120X
40X-160X
•
•
Camera Adapters
•
Digital & Video C-Mount Microscope Cameras for ZTX-T* models
Digital & Video Eyepiece Microscope Cameras for ZTX* models
Up to 21MP cameras available (See GXCAM Range)
Cameras
Illumination
Stands & Stand
Accessories
All GXCAM cameras are supplied with camera adapters for the ZTX-T*
trinocular headed microscopes
For all other c-mount cameras you will need:
o
(ID8732) ADCM0.5XEYEPGXCAM 23.2mm C-Mount Eyepiece
Adapter 0.5X GXCAM Kit Type
For cameras such as Digital SLRs that are equipped with a T2-Mount you
will need:
o
(MEIMA150/50) Digital Camera Adapter MEI
o
(MEIT2) T2 Ring (please specify camera)
o
(MEIMA512) 2.5X Photo Eyepiece
See the GXM Illuminators range of:
LED Ringlights, Fluorescent Ringlights, LED Gooseneck Spot lights, LED or Halogen
Fibre Optics with gooseneck light guides and ringlights
The ZTX Microscopes can be purchased as just heads so they can be mounted in
stands of your choice. We have a variety of additional stands available. Each
stand requires a 76mm focussing ring (ID7247). Stands available (in addition to
those already described above) include:
•
Pneumatic Arm Stand (ID2693)
•
Flexible Arm Stand (ID6929)
•
High Track LED Stand with XY Stage & Lights (ID6905)
•
Mirror Base Track Stand (ID9012)+(ID9108) (requires flexible light guide &
lamphouse)
Stand Accessories Include:
•
Mechanical Stage (ID8053)
STD = Standard i.e. included with every microscope
Accessories
The ZTX series of stereo zoom
microscopes have a large range of
important accessories for:
•
Changing the magnification
range using Objectives and
Eyepieces
•
Changing the working distance
using Objectives
•
Illumination
with
LED,
fluorescent
and
halogen
ringlights, fibre optics and spot
lights
•
Photography with a huge range
of
cameras and camera
adapters
•
Alternative viewing with flexible
arm, pneumatic & track stands
•
Sample holding & manipulation
with stand accessories
More about Auxiliary Objectives:
These attach to the bottom of the
head of the microscope and simply
screw into place. They increase or
decrease the magnification and
working distance
ZTX Eyepieces
ZTX Auxiliary Objectives
Mechanical Stage
(ID8053)
Pneumatic Arm Stand
(ID2693)
High Track LED
Stand with XY
Stage & Lights
(ID6905)
Flexible Arm Stand
(ID6929)
LED & Fibre Optic
Goosenecks &
Ringlights
Mirror Base
Track Stand
(ID9012)
& (ID9108)
LED & Fluorescent
Ring Lights
Digital SLR Camera Adapter
C-Mount Camera Adapter
GXCAM
Cameras with
Imaging
Software
XTL Professional Zoom Range
6.4:1 Zoom Ratio
GX Microscopes ZOOM MAGNIFICATION XTL MODELS
GX Microscopes
XTL Series Models
Zoom Ratio:
Working Distance:
6.4:1
Type
Model
with a pair of 10X
eyepieces)
(ID Code in red)
Total Magnification
(with accessories)
Approx. Working
Distance (mm)
(with accessories)
Illumination
Direction
Lamp Type
Adjustability
Illumination options
Stand type
Stand options
Dual
Illuminated
Pillar
GXM XTL3101(4680)
(Binocular)
Halogen/LED Top
& LED Bottom
Adjustable
- Fibre Optics
- Spot Lights
- Ring Lights
GXM XTL3T101(4567)
(Trinocular)
Small Base
Pillar
GXM XTL3103A(9181)
(Binocular)
GXM XTL3T103A(9182)
(Trinocular)
Large Base
Pillar
GXM XTL3103B(9185)
(Binocular)
Heads also fit
84mm focussing
rings on pillar,
arm, track, boom
arm & articulated
arm stands
None
Zoom Mag
Stereo
Microscopes
GXM XTL3T103B(9186)
(Trinocular)
7X-45X
(3.5X-220X)
88
(137-25)
- Fibre Optics
- Spot Lights
- Ring Lights
(necessary)
GXM XTL3103C(9183)
(Binocular)
XY Stage
Pillar
GXM XTL3T103C(9184)
(Trinocular)
None
(head and 10X
eyepieces only)
GXM XTL3H(4826)
(Binocular head only)
None
(head and 10X eyepieces
only)
Heads fit
84mm focussing
rings on pillar,
arm, track, boom
arm & articulated
arm stands
(necessary)
(necessary)
GX Microscopes Zoom Magnification Microscopes
XTL Series Long Reach Stand Models 6.4:1 Zoom Ratio
Type
Model
with a pair of 10X
eyepieces)
(ID Code in red)
Total Magnification
(+ accessories)
Approx.
Working
Distance (mm)
(+ accessories)
Illumination
Direction
Lamp Type
Adjustability
Illumination
options
GXM XTL3V1 (5571)
(Binocular)
Stand type
Stand options
Boom Arm
GXM XTL3TV1 (5588)
(Trinocular)
Zoom
Mag
Stereo
Microscopes
GXM XTL3V6 (5595)
(Binocular)
GXM XTL3TV6 (5601)
(Trinocular)
7X-45X
(3.5X-220X)
88
(137-25)
GXM XTL3V7 (5618)
(Binocular)
None
- Fibre Optics
- Spot Lights
- Ring Lights
(necessary)
Boom Dual
Arm
Articulated
Arm
GXM XTL3TV7 (5625)
(Trinocular)
XTL3V1
XTL3V6
XTL3V7
Head will
also fit to
Pillar and
Arm stands
G
Microscopes
product datasheet
XTL Series
Professional Stereo Zoom
103A Stand used
in XTL3-103A &
XTL3-T103A
XTL3-V1
(shown with LED Ringlight)
103B Stand used
in XTL3-103B &
XTL3-T103B
Microscopes
The XTL series of professional stereo microscopes are
GX Microscopes’ most popular zoom microscopes with
over 2,000 installations in the UK alone, they provide
high quality, wide field of view images, a wide zoom
range and are highly robust and extremely well built,
suitable for the most demanding uses.
V6 Stand used in XTL3-V6 & XTL3T-TV6
XTL 3T101
103C Stand used
in XTL3-103C &
XTL3-T103C
V7 Stand used inXTL3-V7 & XTL3T-TV7
Specifications:
XTL3103A
XTL3101
(ID4680)
Model:
XTL3T101
(ID4567)
Total Mag
Head
XTL3T103A
XTL3V1
XTL3TV1
(ID5588)
(ID9181)
(ID9182)
(ID5571)
XTL3103B
XTL3T103B
XTL3V6
XTL3TV6
(ID9185)
(ID9186)
(ID5595)
(ID5601)
XTL3103C
XTL3T103C
XTL3V7
XTL3TV7
(ID9183)
(ID9184)
(ID5618)
(ID5625)
XTL3101 – Binocular
XTL3T101 – Trinocular
Trinocular
Binocular
Simultaneous
image to camera
& eyepieces
Trinocular
Binocular
Objectives
Internal Zoom Objectives 0.7x-4.5X
Eyepieces
WF10X
Working
Distance
88mm
Illumination
LED lower lamp,
upper LED/halogen
spot lamp
XTL
XTL103A
XTL T103A
Pillar Stand with
built-in dual
illumination
Specimen Clips
Approx Base Size
(DxWxH) mm:
289x260x55
Stand
Opaque plastic insert
over LED transmitted
light
12V 10W Halogen spot
lamp
(some models may
Simultaneous image
to camera &
eyepieces
XTL
V1
XTL TV1
V1 Boom Arm Stand
450mm
of horizontal arm
V6
XTL TV6
XTL
103B
XTL T103B
410mm
Specimen Clips
XTL
103C
XTL
V7
XTL T103C
XTL TV7
Working Distance = distance from the end of the objective lens to the point on the subject under
observation that is in focus (ie mid-focus point when there is an observable depth of focus range). The working
distance values may change slightly between batches of microscopes as superior optics are developed.
Each microscope in the range is equipped with a pair
of 0.7X-4.5X zoom objectives controlled by a zoom
knob and a pair of 10X extra wide-field eyepieces.
Each eyepiece links directly to one of the angled zoom
objectives, this gives a stunning 3 dimensional image of
your specimen. The optical quality is very good giving
a bright, crisp 3D image of the specimen
XTL3 with Binocular head
XTL3T with Trinocular head for attaching a camera
Both models give 7X-45X zoom magnification range
with the 10X eyepieces, this magnification range can
be extended 3.5X -220X with the optional objectives
and eyepieces shown in the table.
The binocular eyepiece tubes are inclined at a
comfortable 45º. The entire head can be easily
rotated through 360º, it has interpupillary distance
adjustment and both eyepiece tubes have diopter
adjustment. This makes these microscopes suitable for
ergonomic use by the greatest number of people and
assists in achieving parfocality when cameras are
attached.
The head of the microscope sits in a 84mm focussing
ring, this ring can be mounted on a very wide variety of
stands including pillar stands (eg 103A, 103B & 103C)
and long reach boom arm & articulated arm stands
(eg V1, V6 & V7).
Illumination is built-in with the 101 stand providing both
incident and transmitted light. Alternatively, with all
other stands, illumination can be provided separately
using LED ringlights or LED & halogen spot or fibre optic
illuminators.
Each microscope is supplied with a pair of rubber
The stands have a well painted base with steel poles.
There is a precision, smooth focus system using a rack &
pinion mechanism.
The XTL Microscope range is our most versatile stereo
zoom microscope and is an excellent, professional
grade instrument for industry, hobbyists, researchers
and educational establishments.
G
Microscopes
product datasheet
XTL Accessories:
Magnification Table
XTL Series
Eyepieces
Auxiliary
Objectives
Working
Distance
10X
15X
20X
25X
(ID1000) (STD)
(ID3676)
(ID3683)
(ID4987)
0.5X (ID3638)
137mm
3.5X-22.5X
5.2X-33.7X
7X-45X
8.7X-56.2X
0.75X (ID3645)
103mm
5.2X-33.7X
7.8X-50.5X
10.5X-67.5X
13X-84.2X
None (STD)
88mm
7X-45X (STD)
10.5X-67.5X
14x-90X
17.5X-112.5X
1.5X (ID3652)
48mm
10.5X-67.5X
15.7X-101.2X
21X-135X
26.2X-168.7X
2X (ID3669)
25mm
14X-90X
21X-135X
28X-180X
35X-225X
(ID3690) Focussing Eyepiece with 100 division Scale and Crosshair
Reticle Eyepiece
•
•
•
Camera Adapters
•
Digital & Video C-Mount Microscope Cameras for XTL3T* models
Digital & Video Eyepiece Microscope Cameras for XTL* models
Cameras
Illumination
Stands & Stand
Accessories
(ID3706) 0.5X C-mount Adapter for all 0.33 & 0.5in Chip C-mount cameras
(ID3713) 1X C-mount Adapter for all >0.5in Chip C-mount cameras
(ID7322) 23.2mm Eyepiece Tube Adapter for all 23.2mm eyepiece tube
cameras and eyepiece tube camera adapters (converts the photoport
into an eyepiece tube)
will need:
o
(ID3713) 1X C-mount Adapter 1XCMXTL
o
(ID3744) Digital Camera Adapter DCA
o
(ID3782) T2 Filter Thread Adapter FTA-T2
Accessories
The XTL series of stereo zoom
•
Eyepieces
•
using Objectives
•
Illumination
with
LED,
fluorescent
and
halogen
ringlights, fibre optics and spot
lights
•
of
cameras and camera
adapters
•
•
working distance.
The XTL Microscopes can be purchased as just heads so they can be mounted in
stands of your choice. We have a variety of additional stands available. Each
stand requires a 84mm focussing ring (ID4673). Stands available (in addition to
those already described above) include:
•
•
•
•
Frosted Glass Insert for use with 101 Stands (ID5359)
Pneumatic Arm Stand
(ID2693)
XTL Auxiliary
Objectives
GXCAM Camera on
XTLTV6 & 0.5X Cmount Adapter
Mechanical Stage
(ID8053)
LED & Fibre Optic
Goosenecks &
Ringlights
Flexible Arm Stand
(ID6929)
XTL Eyepieces
GXCAM
Cameras with
Imaging
Software
0.5X C-Mount
Camera Adapter
LED & Fluorescent
Ring Lights
Digital SLR Camera
Adapter
C-mount Adapter
Attached to the
Photoport of a XTL3T
Trinocular Head
GX Microscopes ZOOM MAGNIFICATION XTL MODELS
Stereo Microscope Dimensions
XTL3101 & XTL3T101
XTL3103A, XTL3T103A, XTL3103C & XTL3T103C
XTL3103B, XTL3T103B, XTL3103B & XTL3T103B
MZS Series
Ultra-Long Working Distance
Trinocular Professional Zoom
Range
6.4:1 Zoom Ratio
GX Microscopes ZOOM MAGNIFICATION
Professional, Ultra-Long Working Distance
MZS Models
GX Microscopes
Zoom Ratio:
Working Distance:
Ultra-Long Working Distance Optics
MZS Series Models
6.4:1
Type
Model
trinocular head with a pair
of 10X eyepieces)
(ID codes in red)
Total
Magnification
(with
accessories)
Approx.
Working
Distance
(mm)
(with
accessories)
Illumination
Direction
Lamp Type
Adjustability
Illumination
options
Stand type
Stand options
Dual Illuminated Pillar
Top & Bottom,
Halogen &
Fluorescent
Adjustable
GXM MZS0745TL-R(0712)
(Trinocular)
Large Base Pillar
GXM MZST103B (0141)
(Trinocular)
Zoom Mag
7X-45x
(3.5X-270X)
Long Working
Distance
Stereo
Microscopes
- Fibre Optics
- Spot Lights
- Ring Lights
118
(195-35)
XY Stage Pillar
Head also fits
76mm focussing
rings on pillar,
arm, track, boom
arm & articulated
arm stands
None
GXM MZST103C (0142)
(Trinocular)
None
GXM MZS0745TH (8176)
(Trinocular head only)
MZS0745 Series Long Reach Stand Models
Type
Model
trinocular head with a
pair of 10X eyepieces)
(ID codes in red)
Total
Magnification
(+ accessories)
Approx.
Working
Distance
(mm)
(+
accessories)
Illumination
Direction
Lamp Type
Adjustability
Illumination
options
Stand type
Stand options
Boom Arm
GXM MZSTV1 (0136)
(Trinocular)
Boom Dual Arm
Zoom
Mag
Stereo
Microscopes
GXM MZSTV6 (0138)
(Trinocular)
7X-45x
(3.5X-270X)
118
(195-35)
None
Fibre Optics
Spot Lights
Ring Lights
Articulated Arm
GXM MZSTV7 (0140)
(Trinocular)
Head will
also fit to
Pillar and
Arm stands
G
Microscopes
product datasheet
MZS Series
Professional Trinocular
103B Stand used
in MZST-103B
V1 Stand used in MZST -V1
Ultra-Long Working Distance
103C Stand used
in MZST -103C
The MZS series of ultra-long working distance (of 118mm up to
195mm) professional stereo microscopes are GX Microscopes’
most popular zoom microscopes for applications where work
needs to be undertaken on the subject under observation.
This includes the electronics industry, jewellery manufacture,
engraving, component assembly work, soldering, dissections
and live sample work.
MZST -V6 with V76 stand
MZS0745TL-R
This microscope is also produces an unusually high quality
image to the camera and is often the microscope of choice
among customers requiring really good images of their
specimens.
(MZST Head with
7045L-R Stand)
V7 Stand used in
MZST-V7
Specifications:
MZSTV1
MZST103B
Model:
(ID0136)
MZS0745TL-R
(ID0141)
MZSTV6
(ID0712)
MZST103C
(ID0138)
(ID0142)
MZSTV7
(ID0140)
Total Mag
Trinocular
Head
Internal Zoom Objectives 0.7x-4.5X
Eyepieces
WF10X
Working
Distance
Illumination
This microscope gives 7X-45X zoom magnification range with
the 10X eyepieces, this magnification range can be extended
3.5X - 270X with the optional objectives and eyepieces shown in
the table.
118mm (expandable to 195mm with optional objectives)
LED/Tube lower
lamp, upper
LED/halogen spot
lamp
MZST
V1
V1 Boom Arm Stand
450mm
Pillar Stand with
built-in dual
illumination
of horizontal arm
Approx Base Size
(DxWxH) mm:
289x260x55
Stand
Frosted Glass insert over
transmitted light
Halogen spot lamp
(some models may
MZST
103B
MZST
V6
410mm
Specimen Clips
MZST
103C
MZST
V7
Working Distance = distance from the end of the objective lens to the point on
the subject under observation that is in focus (ie mid-focus point when there is an
observable depth of focus range). The working distance values may change slightly
between batches of microscopes as superior optics are developed.
Each microscope in the range is equipped with a pair of 0.7X4.5X zoom objectives controlled by a zoom knob and a pair of
10X extra wide-field eyepieces. Each eyepiece links directly to
one of the angled zoom objectives, this gives a stunning 3
dimensional image of your specimen. The optical quality is
exceptionally good giving a bright, crisp 3D image of the
specimen
All of the MZS microscopes are supplied with trinocular heads.
Lever to select image from one eyepiece to go to camera
Objectives
With over 1,000 installations in the UK alone, they provide the
highest quality, remarkably long working distance, wide field of
view images, a wide zoom range and are highly robust and
extremely well built, suitable for the most demanding uses.
The binocular eyepiece tubes are inclined at a comfortable 45º.
The entire head can be easily rotated through 360º, it has
interpupillary distance adjustment and both eyepiece tubes
have diopter adjustment.
This makes these microscopes
suitable for ergonomic use by the greatest number of people
and assists in achieving parfocality when cameras are
attached.
The head of the microscope sits in a 76mm focussing ring, this
ring can be mounted on a very wide variety of stands including
pillar stands (eg 0745, 103B & 103C) and long reach boom arm
& articulated arm stands (eg V1, V6 & V7).
Illumination is built-in with the 0745 stand providing both incident
and transmitted light. Alternatively, with all other stands,
illumination can be provided separately using LED ringlights or
LED & halogen spot or fibre optic illuminators.
Each microscope is supplied with a pair of rubber eyeguards,
manual & a dust cover.
The stands have a well painted base with steel poles. There is a
precision, smooth focus system using a rack & pinion
mechanism.
The MZS Microscope range is a highly versatile stereo zoom
microscope and is an excellent, professional grade instrument
for
industry,
hobbyists,
researchers
and
educational
establishments.
G
Microscopes
product datasheet
MZS0745 Series
Accessories
MZS Accessories:
Magnification Table
Eyepieces
Auxiliary
Objectives
Working
Distance
10X fn22mm
(STD)
(ID3867)
0.5X (ID3812)
195mm
3.5X-22.5X
0.7X (ID3829)
145mm
4.9X-31.5X
None (STD)
118mm
2X (ID3850)
35mm
•
•
•
Cameras
Illumination
Stands & Stand
Accessories
fn17mm
20X
fn14mm
30X
fn9mm
(ID3874)
(ID1001)
5.2X-33.7X
7X-45X
10.5X-67.5X
7.4X-47.2X
9.8X-63X
14.7X-94.5X
7X-45X (STD)
10.5X-67.5X
14x-90X
21X-135X
14X-90X
21X-135X
28X-180X
42X-270X
(ID3881)10X Focussing Eyepiece with 100 division Scale and Crosshair
Reticle Eyepiece
Camera Adapters
15X
will need:
o
(ID3904) 1X C-mount Adapter 1XCMXTL
o
o
Digital & Video C-Mount Microscope Cameras for all models
The MZS series of stereo zoom
•
Eyepieces
•
using Objectives
•
Illumination with LED, fluorescent
and halogen ringlights, fibre
optics and spot lights
•
of
cameras and camera
adapters
•
•
working distance.
The MZS Microscopes can be purchased as just trinocular heads MZSTH (8176) so
they can be mounted in stands of your choice. We have a variety of additional
stands available. Each stand requires a 76mm focussing ring (ID7247). Stands
available (in addition to those already described above) include:
•
•
•
MZS Eyepieces
MZS Auxiliary Objectives
fn= Field Number
MZS C-Mount Camera Adapters
Pneumatic Arm Stand
(ID2693)
Mechanical Stage
(ID8053)
LED & Fibre Optic
Goosenecks &
Ringlights
Flexible Arm Stand
(ID6929)
GXCAM
Cameras with
Imaging
Software
LED & Fluorescent
Ring Lights
SLR Camera + 1X C-Mount
Adapter + DCA Attached to
the Photoport of a MZS0745T
Trinocular Head
Camera + C-Mount Adapter
Attached to the Photoport of a
MZS0745T Trinocular Head
Ultra-Long Working Distance MZS0745 Models
PS Series
Parallel Optics
Trinocular
Research Grade
Zoom Range
10:1 Zoom Ratio
Research Grade, Parallel Optics
PS Models
GX Microscopes
Research Grade, Zoom Magnification Microscopes
Parallel Optics, Trinocular
PS Series Models
Zoom Ratio:
Working Distance:
10:1
91mm (Std) with 10x eyepieces & 1X objective
Zoom Magnification Range: 8x-80x (Std) with 10x eyepieces & 1X objective
(4x – 360x with accessory objectives & eyepieces)
Type
Model
trinocular head with a pair
of 10X eyepieces)
(ID codes in red)
Total
Magnification
(with
accessories)
Approx.
Working
Distance
(mm)
(with
accessories)
Illumination
Direction
Lamp Type
Adjustability
Illumination
options
Stand type
Stand options
Pillar
GXM PS-T(9206)
(Trinocular)
Top & Bottom, LED
Adjustable
Large Base Pillar
(Microscope head & eyepieces
incl but not shown)
GXM PST103B (9210)
(Trinocular)
Zoom Mag
8X-80X
(4X-360X)
Long Working
Distance
Stereo
Microscopes
- Fibre Optics
- Spot Lights
- Ring Lights
91
(186-40)
XY Stage Pillar
(Microscope head &
eyepieces incl but not shown)
with mechanical XY stage
Head also fits
76mm focussing
rings on pillar,
arm, track, boom
arm & articulated
arm stands
None
GXM PST103C (9212)
(Trinocular)
None
GXM PS-TH (9231)
(Trinocular head only)
PS Series Long Reach Stand Models
Type
Model
trinocular head with a
pair of 10X eyepieces)
(ID codes in red)
Total
Magnification
(+ accessories)
Approx.
Working
Distance
(mm)
(+
accessories)
Illumination
Direction
Lamp Type
Adjustability
Illumination
options
Stand type
Stand options
Boom Arm
GXM PSTV1 (0151)
(Trinocular)
Boom Dual Arm
Zoom
Mag
Stereo
Microscopes
GXM PSTV6 (0152)
(Trinocular)
8X-80X
(4X-360X)
91
(186-40)
None
Fibre Optics
Spot Lights
Ring Lights
Articulated Arm
GXM PSTV7 (0153)
(Trinocular)
Head will
also fit to
Pillar and
Arm stands
G
Microscopes
product datasheet
PS-T Series
Research Grade,
Dual LED Stand
used in PS-T
Trinocular, Parallel Optics
V1 Stand used in PST -V1
103B Stand used
in PST-103B
The PS-T series of parallel optics, research grade stereo
microscopes are GX Microscopes’ highest quality zoom
microscopes with superb optical performance for both
observation and imaging. Idea for applications where the
highest quality image is required.
This includes the electronics industry, jewellery manufacture,
engraving, component assembly work, soldering, dissections
and live sample work.
PST -V6 with V76 stand
103C Stand used
in PST -103C
V7 Stand used in PST-V7
This microscope benefits from an exception large zoom range
with a ratio of 10:1 making it particularly useful for observing
specimens that require a large change in magnification.
PS-TH head on a plain stand
Specifications:
PSTV1
PST103B
Model:
(ID0151)
PS-T
(ID9210)
PSTV6
(ID9206)
PST103C
(ID0152)
(ID9212)
PSTV7
The parallel optics provide the optimum optical configuration
hugely diminishing aberration and fringing errors. The standard
PS-T model is supplied on a versatile and highly robust stand
which is extremely well built and suitable for the most
demanding uses.
Lever to select image from one eyepiece to go to camera 0/100%
Each microscope in the range is equipped with a pair of 0.8X-8X
zoom objectives controlled by a zoom knob and a pair of 10X
super wide-field eyepieces. Each eyepiece links directly to one
of the angled zoom objectives, this gives a stunning 3
dimensional image of your specimen. The optical quality is
bright, pin-sharp and distortion free giving a bright, crisp 3D
image of the specimen
Objectives
Internal Zoom Objectives 0.8x-8X
1x Auxiliary Objective (ID9215)
All of the PS microscopes are supplied with trinocular heads
suitable for attaching a camera..
Eyepieces
WF10X
This microscope gives 8X-80X zoom magnification range with
the 10X eyepieces, this magnification range can be extended
4X - 360X with the optional objectives and eyepieces shown in
the table.
(ID0153)
Total Mag
Head
8X-80X (expandable to 4X-360X with optional accessories), 10:1 zoom ratio
Trinocular
Working
Distance
Illumination
91mm (expandable to 186mm with optional objectives)
None – optional LED & fluorescent ringlights or halogen spot lamps or fibre optics – see GX
Microscopes Illuminators
PST
Pillar Stand with
built-in dual
illumination
Stand
V1
V1 Boom Arm Stand
Approx Base Size
(DxWxH) mm:
289x260x55
450mm
Specimen Clips
·LED top & bottom
illumination,
independently
controllable
of horizontal arm
The input voltage
AC90V~260V 47~63Hz
Pillar diameter Φ25mm,
Pillar Height 240mm
(not suitable for use
with low power
objectives)
PST
Insert diameter
Φ95mm. black-white &
transparent glass
PST
V6
410mm
Focus range 50mm
Focussing ring diameter
Φ76mm.
103B
PST
103C
PST
V7
Working Distance = distance from the end of the objective lens to the point on
the subject under observation that is in focus (ie mid-focus point when there is an
observable depth of focus range). The working distance values may change slightly
between batches of microscopes as superior optics are developed.
The binocular eyepiece tubes are inclined at a comfortable 45º.
The entire head can be easily rotated through 360º, it has
interpupillary distance adjustment and both eyepiece tubes
have diopter adjustment.
This makes these microscopes
suitable for ergonomic use by the greatest number of people
and assists in achieving parfocality when cameras are
attached.
The head of the microscope sits in a 76mm focussing ring, this
ring can be mounted on a very wide variety of stands including
pillar stands (eg PS-T, 103B & 103C) and long reach boom arm &
articulated arm stands (eg V1, V6 & V7).
Illumination can be provided separately using LED ringlights or
LED & halogen spot or fibre optic illuminators.
Each microscope is supplied with a pair of rubber eyeguards,
manual & a dust cover.
The stands have a well painted base with steel poles. There is a
precision, smooth focus system using a rack & pinion
mechanism.
The PS Microscope range is a highly versatile stereo zoom
microscope and is an excellent, professional grade instrument
for industry, researchers and educational & medical
establishments.
G
Microscopes
product datasheet
PS-T Accessories:
Magnification Table
PS-T Series
Eyepieces
Auxiliary
Objectives
Working
Distance
0.5X (ID9213)
186mm
4X-40
6X-60X
8X-80X
12X-120X
0.7X (ID9214)
135mm
5.6X-56X
8.4X-84X
11.2X-112X
16.8X-168X
1X (STD) (ID9215)
91mm
8X-80X (STD)
12X-120X
16x-160X
24X-240X
40mm
12X-120X
18X-180X
24X-240X
36X-360X
10X fn22mm
(STD) (ID9219)
15X
fn17mm
(ID9220)
20X
fn14mm
(ID9221)
30X
1.5X (ID9216)
Must be used with
1x objective
attached)
Reticle Eyepieces
Camera Adapters
•
•
•
•
(ID9227) 0.3X C-mount Adapter for all 0.33 Chip C-mount cameras
will need:
o
(ID9229) 1X C-mount Adapter
o
o
Digital & Video C-Mount Microscope Cameras for PST* models
Cameras
Illumination
Stands & Stand
Accessories
Accessories
fn9mm
(ID9222)
The PS-T series of stereo zoom
•
Eyepieces
•
using Objectives
•
Illumination with LED, fluorescent
and halogen ringlights, fibre
optics and spot lights
•
of
cameras and camera
adapters
•
•
working distance.
The PS Microscopes can be purchased as just trinocular heads PS-TH (9231) so they
can be mounted in stands of your choice. We have a variety of additional stands
available. Each stand requires a 76mm focussing ring (ID7247). Stands available
(in addition to those already described above) include:
•
•
•
PS Eyepieces
PS Auxiliary Objectives
fn= Field Number
PS C-Mount Camera Adapters
Pneumatic Arm Stand
(ID2693)
Mechanical Stage
(ID8053)
LED & Fibre Optic
Goosenecks &
Ringlights
Flexible Arm Stand
(ID6929)
LED & Fluorescent
Ring Lights
GXCAM
Cameras with
Imaging
Software
SLR Camera + 1X C-Mount
Adapter + DCA Attached to
the Photoport of a PS-T
Trinocular Head
Camera + C-Mount Adapter
Attached to the Photoport of a
PS-T Trinocular Head
GX
Parallel Optics, Trinocular PS Models
G
Microscopes
product datasheet
Ultra-Long Reach
Microscope
Range
The GX Microscopes range of
ultra-long reach microscopes
provide outstanding versatility at
great value prices. This makes
them ideal for the inspection of
large specimens and those
specimens
that
cannot
be
mounted on a bench.
YSX-101
YSX-107
YSX-102
YSX-120
SOM-2000C
YZ-20P5
The microscopes are all supplied
with integral, high intensity,
coaxial illumination systems and
articulated microscope head
mounts with click-stop zoom
optics for comfortable, prolonged
viewing.
The stands are very
stable
with
integral
counterbalancing and locking
systems.
The range includes multiple
viewing
ports,
camera
attachments, motorisation with
foot pedal control and, of course
a range of optical magnifications.
Some models include motorised
zoom and motorised focusing
systems. The illumination systems
are cold light sources.
These microscopes are commonly
used in operating theatres, clinics,
dentists, veterinary practices and
research laboratories.
YSX-104
LZJ-11
Specifications and Descriptions:
YSX Series
The YSX range includes 12 models of high quality ultra-long reach, coaxially
illuminated microscopes, a selection of the most popular models are featured in this
datasheet. The models come with a variety of mounting, viewing and working
distance facilities to suit different applications.
All models are equipped with halogen-tungsten lamps and cold-light fibre-optic
coaxial illumination. They are ideally suited to meet the needs of scientists, inspection
teams and medical staff.
They are widely used in industry where ultimate image quality, illumination quality,
comfort and long reach are required.
Observation Unit for 101, 102, 120 models
Binocular straight observation unit
Binocular tilted observation unit
Focal length of objective assembly
Magnifications
Stand
Movable arm
Model
YSX-101
YSX-102
YSX-120
YSX-104
1. Straight binocular
observation unit(F=87mm)
F=200mm
F=250mm
F=300mm
F=400mm
3. Magnifications
4. Total magnification
5. Fine focusing range
f'=87mm
f'=87mm,f'=174mm
f'=200mm,f'=250mm,f'=300mm,f'=400mm
0.6X,1X,1.6X
both floor type and table type available
both long and short arms available
Description
Binocular straight observation, long arm
and floor type
Binocular titled observation, long arm
and floor type
and floor type. Camera or secondary
observation tube attachable.
and table type
YSX-107 (Multi-Function)
6x
200mm working distance
0.6x,1x,1.6x
2.4x-12X
10mm
SOM-2000C (advanced zoom microscope)
Magnification of eyepiece
Visual angle of eyepieces
Working Distance
Magnification
Diameter of Visual Field
Illumination
12.5X
60°-90°continuously adjustable
170mm
4.5X-25X ZOOM
Ø50- Ø9(mm)
6°+0°coaxial illumination, 26°oblique
illumination
Light source
12V 100W halogen lamp
Illumination control
continuously digital adjustable
Lux on objective plane
100,000LX
Focusing range and speed
40mm,speed continuously adjustable
X-Y range and speed
50mmx50mm,speed continuously
adjustable
YZ-20P5 (light weight 33Kgs)
This binocular operating microscope provides 3 levels of magnification, very high
definition images and a large field of view. The cold light source provides bright,
comfortable and even illumination of the subject.
The arm is finely balanced with tensioned springs allowing great freedom of
movement and comfortable positioning at any position.
This instrument provides control of position, magnification, focusing (can be
controlled with footswitch) and inclination.
Focus Length of Objective lens
f200, 250, 300, 350(mm)
Magnification of Eyepiece
12.5X/16B
Working Distance
190 – 240mm
Inclination of binocular eyepiece tubes
45°
Dioptre adjustment range of eyepiece
+/- 6D
Interpupillary distance of eyepieces
50 – 70mm
Height of eyepiece eyecups
18mm
Magnification(f200)
5.3X,8X,12X
Diameter of Visual Field(f200)
Ø38£¬Ø25,Ø17(mm)
Illumination
6°+0°coaxial illumination
Light source
12V/100W halogen lamp
Illumination control
continuously adjustable
Lux on objective plane
30,000 - 80,000Lx
Range and speed of focusing
30mm(2mm/s)
Maximum reach of arm
870mm
Vertical movement range (from floor to
700 – 1100mm
front of objective)
LZJ-11 (Multi-function, Advanced)
Features:
This advanced operating microscope is suitable for almost any operating procedure.
Tiltable binocular tube system with a continuous tilting range of 0-90 deg.
Parallel optical path for the additional binocular and monocular viewing ports
including full synchronisation of movement, focus, light path, magnification, field of
view and orientation.
Motorized focusing system with a zoom rate of 1:5
Coaxial internal illumination system
Six degrees of freedom of movement
Range of stand's vertical movement
500mm
Fine focusing range
50mm Aiming speed @ 2mm/s
Microscope's range of movement - up
180°
and down and from side to side
Motorised zoom speed
2r/m
Interpupillary distance of main and
55 – 72mm
assistant’ binocular heads
The head can be equipped with X-Y
40mm
coupling, movement range
Cold light source illumination
24V150W
Maximum reach of stand's horizontal arm 1030mm
Swing angle of the carrier arm
240°
Working Distance
Diameter of Visual Field
f'=200
5-25X, 42.5 – 8.5mm
f'=250
4-20X, 53 – 10.6mm
f'=300
3.3-16.7X, 64 – 12.6mm
f'=350
3-14.3X, 74 – 15mm
f'=400
2.5-125X, 85 – 17mm
Supplied to you by:
G
Microscopes
product datasheet
Within the GX Microscopes range there are many additional optional stand types such as G-clamp articulated
arms or floor standing boom arms and illumination sources such as fibre optics - please ask your local GX
Microscopes supplier or visit our website if you cannot find what you need in this range. Examples of items
available but not detailed in this datasheet are shown below:
Fibre optic light guides
Fibre optic lamphouses
XY Stages
G Clamp Boom
Arms
¼” tripod
mounts for
cameras
G Clamp
Articulated
Arms
Boom Arm
Stand
GX Microscopes is a division of GT Vision Ltd specialising in the design and manufacture of the
GX Microscopes brand of microscopes.
GT Vision Ltd is the largest independent supplier of microscopes and microscopy imaging and automation systems in
the UK.
If you wish to obtain more details of these products please call or e-mail us:
GT Vision Ltd
Hazel Stub Depot
Camps Rd
HAVERHILL
Suffolk, CB9 9AF
Telephone:
Fax:
E-mail:
Website:
01440 714737
01440 709421
[email protected]
www.gxoptical.com
Or contact you local GX Microscopes Dealer:
Supplied to you by: