Natural Gas and LP Line

Comments

Transcription

Natural Gas and LP Line
Natural Gas
and LP
Line
IUSA is present in Mexico, Europe, Asia, the US, Central and South America.
• Established in 1939.
• Workforce of over 12,000 employees.
• Manufacturing facilities established in Mexico and USA.
• More than 6,000 diversified products for construction, metering and industry.
• 90% of the companies have ISO-9001:200. UL, ANCE, NMX and ASTM
certification, and comply with international regulations applicable to export products.
• Proprietary infrastructure and logistics with 22 sales and distribution offices in
Mexico and the US.
CONTENTS
5
6
12
14
15
16
20
22
25
26
I. PIGTAIL
II. STANDARD SERIES BRASS FITTINGS
III. LIGHT SERIES BRASS FITTINGS
IV. ZAMAC FITTINGS
V. FLEXIBLE GAS HOSES
VI. LOW PRESSURE GAS REGULATORS
VII. HIGH PRESSURE GAS REGULATORS
VIII. BALL VALVES FOR GAS, OIL OR WATER
IX. BY-PASS VALVES FOR GAS OR AIR
X. NEEDLE VALVES FOR GAS OR AIR
XI. GAS STOVE AND OVEN VALVES
XII. GAS TANK VALVES
XIII. GLOBE VALVES AND GAS COUPLERS
XIV. STATIONARY GAS TANK VALVES
XV. GAS CARBURETION TANK VALVES
XVI. GAS LEVEL METERS
XVII. TEMPERATURE CONTROL
FOR WATER CONTROLS
XVIII. TEMPERATURE CONTROLS
(ACCESSORIES)
XIX. TORCH FOR DISPOSABLE GAS CANS
28
30
31
32
35
37
38
39
40
CERTIFICATIONS
PIGTAIL CERTIFICATION
FITTINGS CERTIFICATION
REGULATORS CERTIFICATION
VALVES CERTIFICATION
TEMPERATURE CONTROLS CERTIFICATION
TORCHES CERTIFICATION
IUSA | Natural Gas and LP
4
I. PIGTAIL
50 Cm Pigtail (POL To Inverted Flare)
General Description
Copper pigtail, POL to inverted flare nut. It is used to connect a regulator to a tank
or cylinder.
General Specifications
Pigtail made of 1/4” D.I. copper tube, with brass fittings, POL with left nut (hex. 7/8”) x
UNF 7/16” inverted flare.
R3 Code
Model
Measurement
Pieces per Pack
312064
PTI-1
CGA # 510X7/16” - 24 UNF
20
POL To Inverted Nut Flexible Pigtail
General Description
Flexible hose pigtail, POL to inverted nut, with weather-resistant plastic handle that
allows easy installation on cylinder.
General Specifications
Pigtail made of rubber hose with corrosion-resistant stainless steel mesh, POL CGA
510 (0.880.14 NGO LH) connector to cylinder, 7/16” -18 UNS inverted nut connector to
regulator. Operating pressure: 7 kg/cm2 (100 P.S.I. = 0.68 Mpa). Maximum operating
pressure: 14 kg/cm2 (200 P.S.I. = 1.36 Mpa). Maximum temperature: 60°C. Minimum
resistance to burst 75 kg/cm2 (75 Mpa). Resistance to stress: 90 kg (800N).
R3 Code
Model
Measurement
Pieces per Pack
362496
POL to Inverted Nut
Flexible Pigtail
POL CGA 510 / 7/16” -18
UNS Inverted Nut
50
Pigtail Adapter
General Description
/ male NPT pigtail adapter x female inverted pigtail nut.
1 4”
General Specifications
Made of 360-alloy machined brass, 1/4” MNPT x 7/16” -24 UMF.
R3 Code
Model
Measurement
Pieces per Pack
336617
APPT-14
1/4” MNPT x 7/16” -24 U≤MF
50
www.iusa.mx
5
IUSA | Natural Gas and LP
II. BRASS FITTINGS - STANDARD SERIES
Standard Flare Nut
General Description
Standard flare nut, made of 360-alloy machined brass, available in several
measurements.
General Specifications
Long flare nut, made of 360-alloy machined brass, available in several measurements.
R3 Code
Model
Measurement
Pieces per Pack
311956
311957
301050
311959
TC-3
TC-4
TC-5
TC-6
1/4” HFLARE
5/16” HFLARE
3/8” HFLARE
1/2” HFLARE
100
100
100
100
Reduced Flare Nut
General Description
Reduced flare nut, flared thread to copper tube.
General Specifications
Reduced flare nut, made of 360-alloy machined brass. The first measurement
corresponds to the flared thread; the second to the measurement of the tube.
Available in different measurements.
R3 Code
Model
Measurement
311971
311972
311973
TR-1
TR-2
TR-3
5/16” FLARE x 1/4” TUBE
3/8” FLARE x 5/16” TUBE
1/2” FLARE x 3/8” TUBE
Pieces per Pack
50
50
50
End Nipple
General Description
Male flare to MNPT male flare end nipple. Used for joining copper tube female flare
connector to NPT-thread female flare.
General Specifications
Made of 360-alloy machined brass, available in several measurements with a male
flare connection by another male NPT connection.
R3 Code
311984
311985
311986
311987
311988
311989
311990
311991
311992
311993
311994
311995
6
Model
NT - 2
NT - 3
NT - 4
NT - 8
NT - 9
NT - 10
NT - 11
NT - 12
NT - 13
NT - 14
NT - 16
NT - 17
Measurement
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
MFLARE x 1/8” NPT
MFLARE x 1/4” NPT
MFLARE x 3/8” NPT
MFLARE x 1/4” NPT
MFLARE x 3/8” NPT
MFLARE x 1/2” NPT
MFLARE x 1/8” NPT
MFLARE x 1/4” NPT
MFLARE x 3/8” NPT
MFLARE x 1/2” NPT
MFLARE x 3/8” NPT
MFLARE x 1/2” NPT
Pieces per Pack
100
100
100
100
100
100
100
100
100
100
100
100
II. BRASS FITTINGS - STANDARD SERIES
Flare Union Nipple
General Description
Male flare to male flare union nipple, for joining two copper tubes with female flare
connections.
General Specifications
Union nipple, made of 360-alloy machined brass, available in several measurements,
with male flare x male flare connections.
R3 Code
311998
312000
312002
312004
Model
NU-3
NU-5
NU-8
NU-10
Measurement
1/4” x 1/4” MFLARE
5/16” x 5/16” MFLARE
3/8” x 3/8” MFLARE
1/2” x 1/2” MFLARE
Pieces per Pack
50
50
100
50
Flare Female Connector
General Description
Flare female connector. Male flare to NPT female. Used to join a flare terminal copper
tube to an NPT-thread tube.
General Specifications
Flare female connector, made of 377-alloy brass; male flare to NPT female.
R3 Code
311976
311977
311978
311979
311980
311981
311982
311983
Model
CN - 7
CN - 8
CN - 10
CN - 11
CN - 12
CN - 13
CN - 17
CN - 18
Measurement
5/16” MFLARE x 3/8” HNPT
5/16” MFLARE x 1/2” HNPT
3/8” MFLARE x 1/8” HNPT
3/8” MFLARE x 1/4” HNPT
3/8” MFLARE x 3/8” HNPT
3/8” MFLARE x 1/2” HNPT
1/2” MFLARE x 3/8” HNPT
1/2” MFLARE x 1/2” HNPT
Pieces per Pack
50
50
50
50
50
50
50
50
www.iusa.mx
7
IUSA | Natural Gas and LP
II. BRASS FITTINGS - STANDARD SERIES
90-Degree Stove Elbow
General Description
Ninety-degree stove elbow with male flare to female NPT thread.
General Specifications
Stove elbow, made of 377-alloy cast brass, available in several measurements, male
flare x NPT female.
R3 Code
312012
312014
312016
312020
Model
CE - 3
CE - 4
CE - 5
CE - 8
Measurement
3/8” MFLARE x 1/8” HNPT
3/8” MFLARE x 3/8” HNPT
3/8” MFLARE x 1/2” HNPT
1/2” MFLARE x 1/2” HNPT
Pieces per Pack
50
50
50
50
End Elbow
General Description
End elbow with male flare thread to male NPT thread. Used for joining copper tube
with NPT thread flare connection.
R3 Code
312024
312032
312034
312036
312040
Model
CT - 3
CT - 7
CT - 8
CT - 9
CT - 11
Measurement
1/4” MFLARE x 1/4” NPT
3/8” MFLARE x 1/4” NPT
3/8” MFLARE x 3/8” NPT
3/8” MFLARE x 1/2” NPT
1/2 “ MFLARE x 3/8” NPT
Pieces per Pack
50
50
50
50
50
90-Degree Flare Union Elbow
General Description
Ninety-degree flare union elbow with two male flared threads.
General Specifications
Made of 377-alloy cast brass, available in several male flare measurements.
8
R3 Code
Model
Measurement
312046
312048
CU-2
CU-3
5/16” MFLARE x 5/16” MFLARE
3/8” MFLARE x 3/8” MFLARE
Pieces per Pack
50
50
II. BRASS FITTINGS - STANDARD SERIES
Female Plug
General Description
Female plug for male flared thread.
General Specifications
Female plug, made of 360-alloy machined brass, available in several measurements,
flared female thread.
R3 Code
Model
Measurement
312007
TH-3
3/8” HFLARE
Pieces per Pack
50
Flare Male Plug
General Description
Male plug for female flared thread.
General Specifications
Male plug, made of 360-alloy machined brass, available in several measurements,
male flared thread.
R3 Code
Model
Measurement
Pieces per Pack
312011
TM-3
3/8” MFLARE
50
www.iusa.mx
9
IUSA | Natural Gas and LP
II. BRASS FITTINGS - STANDARD SERIES
Male Branch Tee
General Description
Male branch tee with two male flared threads and a central male NPT thread.
General Specifications
Male branch tee, made of 377-alloy machined brass, available in a single
measurement, two 3/8” male flared threads and a central 3/8” male NPT thread.
R3 Code
Model
Measurement
Pieces per Pack
312056
TTC-2
3/8” MFLARE x 3/8” MFLARE x 3/8” MNPT
50
Flare Union Tee
General Description
Union tee with three male flared threads.
General Specifications
Union tee, made of 377-alloy cast brass, available in several measurements, three
flared threads.
R3 Code
Model
Measurement
Pieces per Pack
312052
312053
312054
TU-1
TU-2
TU-3
1/4” MFLARE x 1/4” MFLARE x 1/4” MFLARE
5/16” MFLARE x 5/16” MFLARE x 5/16” MFLARE
3/8” MFLARE x 3/8” MFLARE x 3/8” MFLARE
50
50
50
Threaded Pol Tailpiece
General Description
POL tailpiece for joining a cylinder valve to a 1/4” MNPT thread.
General Specifications
POL tailpiece, made in 360-alloy machined brass, POL x 1/4” MNPT thread, 6cm long.
R3 Code
Model
Measurement
312063
PPR-1
1/4” MNPT
10
Pieces per Pack
50
II. BRASS FITTINGS - STANDARD SERIES
Left-Hand Nut For Pigtail Or POL
General Description
Left-hand nut for pigtail or POL.
General Specifications
Left-hand nut for pigtail or POL, made of 360-alloy machined brass, 7/8” Hex left-hand
thread, 0.880 NGO.
R3 Code
Model
Measurement
Pieces per Pack
311970
TIP-1
0,880 - 14NGO - LH 7/8” Hex
100
Compression Sleeves
General Description
Brass compression sleeves.
General Specifications
Made of 360-alloy brass, available in 1/4” measurement.
R3 Code
Model
Measurement
312059
BA-3
1/4”
Pieces per Pack
500
Compression Nut
General Description
Brass compression nut.
General Specifications
Compression nut, made of 360-alloy machined brass, available in several
measurements.
R3 Code
Model
Measurement
Pieces per Pack
311951
TB-3
1/4” HUNF
100
www.iusa.mx
11
IUSA | Natural Gas and LP
III. BRASS FITTINGS - LIGHTWEIGHT SERIES
Lightweight Flare Nut
General Description
/ flare nut.
3 8”
General Specifications
Made of 360-alloy machined brass.
R3 Code
Model
Measurement
311958
TC-5
3/8” HFLARE
Pieces per Pack
100
Male Connector
General Description
Male connector, flare male to NPT male, used for joining a flared thread copper tube
to an NPT thread.
General Specifications
Made in 360-alloy brass, available in several measurements.
R3 Code
Model
Measurement
320430
320431
320432
320433
NTL-12L
NTL-13L
NTL-14L
NTL-17L
3/8” MFLARE x 1/4” MNPT
3/8” MFLARE x 3/8” MNPT
3/8” MFLARE x 1/2” MNPT
1/2” MFLARE x 1/2” MNPT
Pieces per Pack
100
100
100
50
Flare To Solder Tube Connector
General Description
Flared thread to solder copper tube connector.
General Specifications
Made of 360-alloy brass, available in several measurements.
R3 Code
Model
Measurement
313102
313120
CFS-1
CFS-2
3/8” MFLARE x 1/2” SOLDER
1/2” MFLARE x 1/2” SOLDER
12
Pieces per Pack
50
50
III. BRASS FITTINGS - LIGHTWEIGHT SERIES
Flare Female Connector
General Description
Male flare to NPT female connector.
General Specifications
Made of 360-alloy machined brass. Several measurements.
R3 Code
320428
320429
320423
320424
320425
320426
320427
Model
CNL - 2L
CNL - 7L
CNL - 10L
CNL - 11L
CNL - 12L
CNL - 13L
CNL - 18L
Measurement
1/4” FLARE x 1/4” HNPT
5/16” FLARE x 3/8” HNPT
3/8” FLARE x 1/8” HNPT
3/8” FLARE x 1/4” HNPT
3/8” FLARE x 3/8” HNPT
3/8” FLARE x 1/2” HNPT
1/2” FLARE x 1/2” HNPT
Pieces per Pack
50
50
50
50
50
50
50
Hose Barb Adapter
General Description
Hose barb to NPT male tube adapter.
General Specifications
Made of 360-alloy brass, available in several measurements.
R3 Code
Model
Measurement
Pieces per Pack
336597
336598
336604
CM-1414
CM-3838
CM-3814
1/4” MNPT x 1/4” HOSE BARB
3/8” MNPT x 3/8” HOSE BARB
3/8” MNPT x 1/4” HOSE BARB
50
50
50
Swivel Adapter
General Description
Female flare swivel nut to male hose barb.
General Specifications
Made of 360-alloy machined brass, from female flare to male hose barb.
R3 Code
336607
336608
339082
Model
CG1414
CG3838
TL3838
Measurement
1/4” HFLARE x 1/4” BARB
3/8” HFLARE x 3/8” BARB
3/8” HFLARE x 3/8” BARB
Pieces per Pack
50
50
50
www.iusa.mx
13
IUSA | Natural Gas and LP
IV. ZAMAC FITTINGS
90-Degree Barb To NPT Female Elbow
General Description
90-degree elbow, barb to NPT female.
General Specifications
90-degree elbow, made of Zamac, several measurements, female NTP to hose barb.
R3 Code
Model
Measurement
323977
CM-3838
3/8” HNPT x 3/8” hose barb
Pieces per Pack
50
Hose Barb Pivot To Male NPT Adapter
General Description
Hose barb pivot male NPT adapter.
General Specifications
Straight hose barb pivot, made of Zamac, MNPT x hose barb.
R3 Code
Model
Measurement
336618
PZ-3838
3/8” MNPT x 3/8” hose barb
14
Pieces per Pack
50
V. FLEXIBLE FITTINGS FOR GAS
Flexible Fittings For Gas
General Description
Flexible gas connector with stainless steel mesh, from 0.60m to 5.00 in length.
General Specifications
Nitrile rubber hose, stainless steel mesh jacket, heat-resistant up to 60°C. 3/8” x 3/8”
flare fittings, from 0.60m to 5.00 in length.
R3 Code
398065
398066
398067
398068
398069
398070
398071
Length
0.60 m
1.00 m
1.50 m
2.00 m
3.00 m
4.00 m
5.00 m
Fittings
3/8” x 3/8” FLARE
3/8” x 3/8” FLARE
3/8” x 3/8” FLARE
3/8” x 3/8” FLARE
3/8” x 3/8” FLARE
3/8” x 3/8” FLARE
3/8” x 3/8” FLARE
Pieces per Pack
10
10
10
10
5
5
5
www.iusa.mx
15
IUSA | Natural Gas and LP
VI. LOW-PRESSURE GAS REGULATORS
Two-Outlet Mod. 201 Regulator With Pigtails
General Description
Low-pressure gas regulator with two pigtails, for two gas cylinders.
General Specifications
Low-pressure gas regulator, 11” W.C. (28 gr/cm2), with 2 POL pigtails with left-hand
nut, 2 flare nuts and one tube connector, one-stage, for two cylinders, with manual
change valve.
R3 Code
Model
Inlet / Outlet
398087
201
2 POL PIGTAILS / 3/8” HNPT + 3/8” TUBE
CONNECTOR X 3/8” FLARE
Pieces per Pack
10
Two-Outlet Gas Regulator
General Description
Two-outlet low-pressure gas Mod. 2001 regulator with integrated manual change
valve for two gas cylinders of any capacity.
General Specifications
Low-pressure 11” W.C. (28 gr/cm2) gas regulator with integrated manual change
valve, 7/16” 24 UNF left-hand thread inlets for two pigtails, and one 3/8” HNPT outlet.
R3 Code
323986
323999
Model
R-2001-A00
R-2001-A2VB
Inlet / Outlet
Pieces per Pack
(2) 7/16” - 24 FOR PIGTAILS / 3/8” HNPT
40
2 PIGTAILS / 3/8” MNPT TUBE
20
CONNECTOR x 3/8” FLARE + 2 3/8”
FLARE NUTS
Single Mod. 102 Gas Regulator
General Description
Single Mod. 102 regulator for low-pressure gas.
General Specifications
One-stage low-pressure 11” W.C. (28 gr/cm2) regulator for gas cylinders or stationary
tanks.
R3 Code
311786
311788
16
Model
102 W/POL
102 W/O POL
Inlet / Outlet
POL / 3/8” HNPT
1/4” HNPT / 3/8” HNPT
Pieces per Pack
20
20
VI. LOW-PRESSURE GAS REGULATORS
Single Mod. 3001 Gas Regulator
General Description
One-stage gas regulator, used in low-pressure, stationary tank or cylinder installations
any capacity.
General Specifications
Low-pressure, one-stage 11” W.C. (28 gr/cm2) regulator. For home use, 200,000btu/
hr capacity. Handled with soft POL tailpiece and handle, with hard POL tailpiece, or
just with 1/4” HNPT inlet connector and 1/4” HNPT outlet.
R3 Code
Model
Inlet / Outlet
Pieces per Pack
324007
324005
324006
R-3001-A00
R-3001-AZ0
R-3001-AS0
1/4” HNPT / 3/8” HNPT
POL / 3/8” HNPT
POL AND HANDLE / 3/8” HNPT
40
40
40
Single Mod. 3100 Gas Regulator
General Description
Single model 3100 low-pressure gas regulator for home use.
General Specifications
Home use, low-pressure 11” W.C. (28 gr/cm2) gas regulator with one 1/4” HNPT inlet
connection and 3/8” HNPT outlet, 180,000 btu/hr capacity.
R3 Code
Model
Inlet / Outlet
Pieces per Pack
324011
R-3100-A00
1/4” HNPT / 3/8” HNPT
40
www.iusa.mx
17
IUSA | Natural Gas and LP
VI. LOW-PRESSURE GAS REGULATORS
Single Mod. 3101 Gas Regulator
General Description
Single Mod. 3101 low-pressure gas regulator for domestic use.
General Specifications
Single stage regulator. For low-pressure 11” W.C. (28 gr/cm2) domestic use, 180,000
btu/hr capacity. With sogt POL tailpiece and handle, or with hard POL tailpiece and
3/8” HNPT outlet.
R3 Code
Model
Inlet / Outlet
324012
324013
R-3101-AZ0
R-3101-AS0
POL / 3/8” HNPT
POL and HANDLE / 3/8” HNPT
Pieces per Pack
40
40
Single Mod. 5000 Gas Regulator For One Device
General Description
Single Mod. 5000 gas regulator for one consumption device.
General Specifications
One-stage regulator for one consumption device in low-pressure, 11” W.C. (28 gr/
cm2) gas installations, with soft POL tailpiece and handle, or hard POL tailpiece and
3/8” HNPT outlet.
R3 Code
Model
324029
324020
324024
R-5000-A00
R-5000-AZ0
R-5000-AS0
18
Inlet / Outlet
1/4” HNPT / 3/8” HNPT
POL / 3/8” HNPT
POL AND HANDLE / 3/8” HNPT
Pieces per Pack
20
20
20
VI. LOW-PRESSURE GAS REGULATORS
Single Mod. 5005 Gas Regulator
General Description
Single, Mod. 5005 low-pressure gas regulator with POL and plastic handle on the
inlet, multiple-length yellow hose, swivel connector on the outlet.
General Specifications
Single, Mod. 5005, 11” W.C. (28 gr/cm2) low-pressure gas regulator, with POL and
plastic handle on inlet and multiple-length yellow hose and 3/8” female flare swivel
connector on the outlet.
R3 Code
Model
Inlet / Outlet
Pieces per Pack
324114
R-5005-ASE16FF6
POL AND HANDLE / HOSE
20
Single Stage Mod. 2403-C2 Gas Regulator
General Description
Model 2403-C2 low-pressure gas regulator, used as a single stage regulator, with
POL.
General Specifications
Low-pressure 11” W.C. (28 gr/cm2) regulator used as a single stage, gray, POL inlet
and left-hand nut, and 1/2” HNPT capacity outlet.
R3 Code
Model
Inlet / Outlet
311789
2403-C2
POL / 1/2” HNPT
Pieces per Pack
16
Second Stage Mod. 2403-C4 Gas Regulator
General Description
Second-stage gas regulator, 10 PSI (0.7 kg/cm2) inlet and low-pressure 11” W.C. (28
gr/cm2) outlet, gray, 1/2” HNPT inlet, and 1/2” HNPT outlet.
General Specifications
Low-pressure 11” W.C. (28 gr/cm2) gas regulator, used as a second stage, gray, 1/2”
HNPT inlet, 1/2” HNPT outlet.
R3 Code
Model
Inlet / Outlet
311790
2403-C4
1/2” HNPT / 1/2” HNPT
Pieces per Pack
16
www.iusa.mx
19
IUSA | Natural Gas and LP
VII. HIGH-PRESSURE GAS REGULATORS
Mod. 7000 Gas Regulator
General Description
High-pressure, model 7000 gas regulator. May be used with portable or lightweight
industrial equipment, as well as first stage.
General Specifications
High-pressure gas regulator.1/4” HNPT inlet, 1/4” HNPT outlet. Factory calibrated to
20 PSI. Special calibrations from 1 to 30 PSI.
R3 Code
Model
324211
324208
324210
R-7000-A00
R-7000AZ0
R-7000AS0
Inlet / outlet
1/4” HNPT / 1/4” HNPT
POL / 1/4” HNPT
POL AND HANDLE / 1/4” HNPT
Pieces per Pack
20
20
20
Mod. 7003 Gas Regulator
General Description
Manual adjustment, model 7003 high-pressure gas regulator. May be used with
portable or lightweight industrial equipment.
General Specifications
Manual adjustment, high-pressure gas regulator, from 0 to 10 PSI. With soft POL
and handle connector, with POL, or only x 1/4” HNPT.I outlet.
R3 Code
Model
324407
R-7003-A00
20
Inlet / Outlet
Pieces per Pack
1/4” HNPT / 1/4” HNPT
20
VII. HIGH-PRESSURE GAS REGULATORS
Mod. 7008 Gas Regulator
General Description
Model 7008 high-capacity, manual adjustment, high-pressure gas regulator. May be
used as a first-stage regulator in remote installations or as a high-pressure regulator
with lightweight industrial equipment.
General Specifications
High-pressure, manual adjustment regulator, from 0 to 40 PSI and high capacity
(up to 2’800,000 BTU/hr). With 1/4” HNPT inlet x 1/4” HNPT outlet and 1/4” HNPT
manometer port (manometer not included).
R3 Code
Model
339313
R-7008-C00
Inlet / Outlet
Caliber
Pieces per Pack
1/4” HNPT / 1/4” HNPT
0-40 PSI
10
Mod. 2403 S4 And U4 Gas Regulator
General Description
Mod. 2403-S4 and U4 high-pressure gas regulator, may be used as a first stage
regulator or with high-pressure consumption equipment.
General Specifications
High-pressure regulator with 1-5 PSI outlets or 10 to 15 PSI, respectively, at an inlet
pressure of 100 PSI. Red. 1/2” HNPT inlet x 1/2” HNPT outlet.
R3 Code
Model
311791
311792
2403-S4
2403-U4
Inlet / Outlet
1/2” HNPT / 1/2” HNPT
1/2” HNPT / 1/2” HNPT
Caliber
Pieces per Pack
1-5 PSI
10-15 PSI
www.iusa.mx
16
16
21
IUSA | Natural Gas and LP
VIII. WATER, OIL OR GAS BALL VALVES
Standard Threaded Ball Valve, Lever Handle
General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball
valve, open and close with a quarter of a turn (90°), UL certified for flammable gas,
gas and natural, features a lever handle that enables easy operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball
valve made of nickel-plated cast brass, open and close with a quarter of a turn (90°),
high-durability Teflon® seat, steel lever, UL certified for flammable gas, like gas and
natural gas.
R3 Code
311830
311831
311826
311827
311828
311829
Model
1/2” HNPT
3/4” HNPT
1” HNPT
1 1/4” HNPT
1 1/2” HNPT
2” HNPT
Pieces per Pack
20
20
10
5
5
5
Solder Standard Ball Valve, Lever Handle
General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port solder ball
valve, open and close with one quarter of a turn (90°). UL certified for flammable gas,
gas and natural, features a lever handle that enables easy operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port ball valve made
of cast brass, high-durability Teflon® seat, steel lever, UL certified for flammable gas,
like gas and natural gas.
R3 Code
318644
311842
311741
22
Model
1/2” F SOLDER
3/4” F SOLDER
1” SOLDER
Pieces per Pack
20
20
10
VIII. WATER, OIL OR GAS BALL VALVES
Standard Threaded Ball Valve, Drop-Type Handle
General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball
valve, open and close with a quarter of a turn (90°), UL certified for flammable gas,
gas and natural, features a drop-type handle that allows easy grip and requires little
space for open-close operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball
valve made of nickel-plated cast brass, open and close with a quarter of a turn
(90°) with aluminum drop-type handle, high-durability Teflon® seat, steel lever, UL
certified.
R3 Code
362456
362458
Model
1/2” HNPT
3/4” HNPT
Pieces per Pack
10
8
Solder Standard Ball Valve, Drop-Type Handle
General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port solder ball
valve, open and close with one quarter of a turn (90°). UL certified for flammable gas,
gas and natural. Features a drop-type handle that allows easy grip and requires little
room for open-close operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port ball valve
made of nickel-plated cast brass, one quarter of a turn (90°) open and close with a
drop-type handle, high-durability Teflon® seat, steel lever, UL certified.
R3 Code
362457
362459
Model
1/2” F SOLDER
3/4” F SOLDER
Pieces per Pack
10
8
www.iusa.mx
23
IUSA | Natural Gas and LP
VIII. WATER, OIL OR GAS BALL VALVES
Compact Threaded Ball Valve
General Description
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port threaded ball
valve, open and close with a quarter of a turn (90°), because of its features, it may
be used for flammable gases, like gas and natural gas.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port threaded ball
valve made of nickel-plated cast brass, open and close with a quarter of a turn (90°),
high-durability Teflon® seat.
R3 Code
377185
377187
Model
1/2” HNPT
3/4” HNPT
Pieces per Pack
10
10
Solder Compact Ball Valve
General Description
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port solder ball
valve, open and close with one quarter of a turn (90°). Because of its features, it may
be used for flammable gases, like gas and natural gas.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port ball valve
made of cast brass, Teflon® seat. High-durability.
R3 Code
377186
362638
24
Model
1/2” F SOLDER
3/4” F SOLDER
Pieces per Pack
10
10
IX. BY- PASS VALVES FOR GAS AND AIR
By-Pass Valve
General Description
Low-pressure (28 gr/cm2) gas or air by-pass valve.
General Specifications
Low-pressure by-pass valve, made of 360-alloy brass, may be used with gas or
natural gas, opens and closes with 1/4 of a turn.
R3 Code
311871
311872
311873
311874
311875
311876
311877
Measurements
3/8” MFLARE x 3/8” MFLARE
1/2” MFLARE x 1/2” MFLARE
3/8” MFLARE x 1/2” SOLDER
1/2” MFLARE x 1/2” SOLDER
1/2” SOLDER x 1/2” SOLDER
1/2” MFLARE x 1/2” MNPT
3/8” MFLARE x 1/2” MNPT
Other
With 2 flare nuts
With 2 flare nuts
With 1 flare nut
With 1 flare nut
Without nuts
With 1 flare nut
With 1 flare nut
Pieces per Pack
10
10
10
10
10
10
10
www.iusa.mx
25
IUSA | Natural Gas and LP
X. NEEDLE VALVES FOR GAS OR AIR
Needle Valves
General Description
Series 200 needle valve for low or high pressure, fine thread, for gas or air.
General Specifications
Needle valve with fine thread connections for low or high pressure, fine thread for
gas or air. Several measurements available.
R3 Code
324272
324274
324275
324277
324279
324351
324326
324327
324328
324282
324284
324273
324325
324276
324278
324280
324281
324326
324327
324328
324282
324285
26
Model
V - 201 - A00
V - 202 - A00
V - 203 - A00
V - 204 - A00
V - 205 - A00
V - 206 - A00
V - 207 - A00
V - 208 - A00
V - 209 - A00
V - 210 - A00
V - 213 - A00
V - 201 - C00
V - 202 - C00
V - 203 - C00
V - 204 - C00
V -205 - C00
V - 206 - C00
V - 207 - C00
V - 208 - C00
V - 209 - C00
V - 210 - C00
V - 213 - C00
Measurement
1/4” HNPT x 1/4” HNPT
3/8” MFLARE x 3/8” MFLARE
3/8” MFLARE x 1/4” HNPT
1/4” MNPT x 1/4” HNPT
1/4” MNPT x 1/4” MNPT
1/4” HNPT x 1/4” MNPT
1/4” MNPT x 9/16” LEFT-HAND M
9/16” LEFT-HAND M x 1/4” MNPT
9/16” LEFT-HAND M x 1/8” MNPT
1/4” HNPT x 1/8” MNPT
1/4” MNPT x 3/8” FLARE
1/4” HNPT x 1/4” HNPT
3/8” MFLARE x 1/4” HNPT
1/4” MNPT x 3/8” FLARE
1/4” MNPT x 1/4” HNPT
1/4” MNPT x 1/4” MNPT
1/4” HNPT x 1/4” MNPT
1/4” MNPT x 9/16” LEFT-HAND M
9/16” LEFT-HAND M x 1/4” MNPT
9/16” LEFT-HAND M x 1/8” MNPT
1/4” HNPT x 1/8” MNPT
1/4” MNPT x 3/8” FLARE
Pieces per Pack
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
X. NEEDLE VALVES FOR GAS OR AIR
Needle Valves
www.iusa.mx
27
IUSA | Natural Gas and LP
XI. GAS STOVE AND OVEN VALVES
Simple Mod. E-305 Stove Valve
General Description
Simple stove valve with continuous flame increase, with optional safety mechanism,
operating pressure 28 gr/cm2. 1/8” MNPT inlet and #70 idle jet outlet.
General Specifications
For stoves, with optional safety mechanism, operating pressure 28 gr/cm2,
inlet, #70 idle jet outlet. Made of brass.
R3 Code
311843
311844
Extension
Inlet/Outlet
305 SIMPLE VALVE
1/8” MNPT / #70 idle jet
305 VALVE W/SAFETY LOCK 1/8” MNPT / #70 idle jet
/ NPT
1 8”
Pieces per Pack
100
100
Zamac Flanged Stove Valve
General Description
Simple Zanac stove valve with mounting flange, operating pressure 28 gr/cm2, 2
flame measurements, with safety mechanism.
General Specifications
Simple Zamac stove valve, operating pressure 28 gr/cm2, 2 flame measurements,
with safety mechanism, features threaded mounting flange and 1/8” MNPT inlet
connection, and #71 idle jet.
R3 Code
399342
Inlet/Outlet
1/8” MNPT / #71 idle jet
Pieces per Pack
100
Oven Valve
General Description
Oven valve with continuous flame increase,
sleeve and nut outlet.
/ MNPT inlet and 3/8” compression
1 8”
General Specifications
Inlet connection: 1/8”-27 NPT; 3/8” compression sleeve and nut outlet. Operating
pressure: 28 gr/cm2. Maximum operating temperature: 120°C. Safety mechanism
that prevents accidental opening. Made of brass.
R3 Code
311847
28
Inlet/Outlet
1/8” MNPT / COMPRESSION NUT FOR 3/8” TUBE
Pieces per Pack
50
XI. GAS STOVE AND OVEN VALVES
Upper Burner Valve (Grill)
General Description
Burner valve with continuous flame increase,
sleeve and nut outlet.
/ MNPT inlet and 1/4” compression
1 8”
General Specifications
/ NPT inlet and 1/4” outlet, operating pressure 28 gr/cm2, maximum operating
1 8”
temperature 120°C, safety mechanism that prevents accidental opening, made of
brass.
R3 Code
311852
Length Extension Inlet/Outlet
46
1/8” MNPT / COMPRESSION NUT FOR 3/8” TUBE
Pieces per Pack
50
www.iusa.mx
29
IUSA | Natural Gas and LP
XII. GAS CYLINDER VALVES
POL Valve For Portable Gas Cylinders
General Description
Gas cylinder valve, POL system, NOM and UL approved.
General Specifications
Valve for 2 to 45 kg portable canisters, POL system. This valve features a safety
valve that opens at 375 PSI and its relief capacity is 10m3/min 3/4” MNPT connection
to cylinder and (POL CGA 510) 0.885”-14 NGO L.H. service outlet.
R3 Code
395834
Model
848 IUSA
System
POL
Pieces per Pack
40
POL Valve For Portable Gas Cylinders (Export)
General Description
Gas cylinder valve, POL system, INCOTEC and UL approved.
General Specifications
Valve for 2 to 45 kg portable canisters, POL system (CGA 510, 0.885”-14 NGO L.H.).
This valve features a screw on top of the handle that allows changing it. 3/4” MNGT
connection to cylinder. It features a safety valve that opens at 375 PSI and its relief
capacity is 10m3/min.
R3 Code
306339
Model
858 IUSA
System
POL (EXPORT)
Pieces per Pack
40
Type 1 (ACME) Valve For Portable Gas Cylinders
General Description
Type-1 (ACME) system gas cylinder valve that connects by hand (no tools required)
by means of type-1 connection, like CRP-1B (F) connector, and closes the flow of
gas in case of fire or in the event of an excess in the demand of flow. U.L.-approved.
Can also be connected to a POL for filling or service (without the safety features). UL
approved and for use in Mexico.
General Specifications
Recommended for portable cylinders containing from 2 to 45 kg of gas. The safety
valve is calibrated to 375 PSI and has a relief capacity of 10m3/hr It is connected to
the cylinder by means of a 3/4” MNGT thread. Service connection is POL-compatible
type 1 (ACME).
R3 Code
363455
30
Model
868 IUSA
System
TYPE 1 (ACME/POL)
Pieces per Pack
40
XIII. GLOBE VALVES AND GAS COUPLERS
Globe Valve
General Description
High-pressure, 400 PSI (28 kg/cm2) globe valve. UL approved.
General Specifications
Nodular-iron-made globe valve, brass stem, operating pressure up to 400 PSI (28
kg/cm2), W.O.G. (Water, Oil, Gas), UL-certified.
R3 Code
311882
311883
395811
Model
1/2” HNPT
3/4” HNPT
1” HNPT
Pieces per Pack
10
10
10
Fill Coupler
General Description
Fill coupler for gas lines.
General Specifications
Fill coupler for gas, made of brass, for 1
MNPT line connection thread.
R3 Code
311893
/ ACME threaded fill valves, features 3/4”
3 4”
Measurement
1 3/4” ACME x 3/4” MNPT
Pieces per Pack
50
www.iusa.mx
31
IUSA | Natural Gas and LP
XIV. STATIONARY GAS TANK VALVES
Mod. 2028 Fill Valve
General Description
Fill valve for stationary gas tanks with 1
the tank. Mod. 2028.
/ ACME thread and 1 1/4” NPT thread to
3 4”
General Specifications
1 3/4” ACME coupling to gas hose and 1 1/4” NPT to tank. Combination of two check
valves (fill and counter-pressure), fill capacity of 265 liters per minute (approx.).
NOM and UL certified.
R3 Code
311809
Model
2028
Connection to Tank
1 1/4” MNPT
Service Connection
1 3/4” ACME
Pieces per Pack
20
Mod. 2043 Service Valve
General Description
Stationary tank service valve with POL service thread, 3/4” MNPT connection to
cylinder, and maximum fill valve with brass nut and deflector (flange) included.
General Specifications
/ MNPT thread coupling to tank and maximum fill deflector, manual operation hand
wheel to open and close, UL certified.
3 4”
R3 Code
Model
Length of deflector
338493
315543
2043-15
2043-26
15 cm
26 cm
Connection
to Tank
3/4” MNPT
3/4” MNPT
Service
Connection
POL
POL
Pieces per
Pack
20
20
Mod. 2007 External Spring Safety Valve
General Description
Safety valve with external spring for stationary tanks and gas lines.
General Specifications
Safety valve with 3/4” MNPT thread coupling to tank, relief capacity of 50 m3/min (air),
aperture pressure 250 PSI. Spring outside tank, NOM and UL certified. Used only in
the replacement market.
R3 Code
Model
311805
2007
32
Connection to
Tank or Line
3/4” MNPT
Relief Capacity
49.6 m3/min 17SUCFM
Pieces per
Pack
20
XIV. STATIONARY GAS TANK VALVES
Mod. 2017 Internal Spring Safety Valve
General Description
Coupling to tank with 3/4” MNPT thread, relief capacity of 51 m3/min (1,800 CFM),
aperture pressure 250 PSI, spring inside tank, NOM and UL certified.
General Specifications
Coupling to tank with 1” MNPT thread, relief capacity of 51 m3/min (1,800 CFM),
aperture pressure 250 PSI, spring inside tank, NOM and UL certified.
R3 Code
Model
399316
2017
Connection to
Tank or Line
3/4” MNPT
Relief
Capacity
51 m3/min /
1,800 CFM
Tank
Capacity
500 to 1,000
liters
Pieces per
Pack
20
Mod. 2022 Internal Spring Safety Valve
General Description
Safety valve with internal spring, 3/4” MNPT thread, for carburetion and/or stationary
gas tank. Ensures an adequate relief in the event of excess pressure, thus avoiding
the risk of accidents. Closes automatically when pressure returns to a safe level.
General Specifications
Coupling to tank with 1” MNPT thread, relief capacity of 22.24 m3/min (848 CFM),
aperture pressure 250 PSI, spring inside tank, NOM and UL certified.
R3 Code
311808
Model
2022
Connection to
Pieces per
Relief Capacity
Tank Capacity
Tank or Line
Pack
1” MNPT
22.24 m3/min / 848 CFM
300 liters
20
www.iusa.mx
33
IUSA | Natural Gas and LP
XIV. STATIONARY GAS TANK VALVES
2009 Vapor Return Valve
General Description
Vapor return valve for stationary gas tanks.
General Specifications
1 1/4” ACME vapor return coupling with no-return valve,
tank, NOM and UL certified.
R3 Code
Model
311806
2009
Connection
to Tank
3/4” MNPT
/ NPT thread coupling to
3 4”
Service Connection
Pieces per Pack
1 1/4” ACME
20
Mod. 2010 Drain Valve (Check Lock)
General Description
Mod. 2010 drain valve or check lock for stationary tanks.
General Specifications
/ MNPT thread coupling to tank, with built-in no-return valve, and 3/4” HNPT thread
3 4”
outlet.
R3 Code
311807
34
Connection to Tank
3/4” MNPT
Outlet Connection
3/4” HNPT
Pieces per Pack
20
XV. GAS CARBURETION TANK VALVES
Mod. 2018 Carburetion Fill Valve
General Description
Fill valve for carburetion tank. Features double check valve, 1 3/4” ACME thread and
3/4” MNPT thread.
General Specifications
Carburetion fill valve, with upper fill check valve and lower counter-pressure check
valve, with 1 3/4” ACME thread and coupling to tank with 3/4” NPT thread. NOM and
UL certified.
R3 Code Model
311813
2018
Connection to Tank
3/4” MNPT
Service Connection
1 3/4” ACME
Pieces per Pack
20
Mod. 2015 Carburetion Service Valve
General Description
Serve valve for gas tanks used in carburetion systems that allows control of gas flow
to combustion system or allows cutting off supply altogether with no risk of leaks.
Model 2015.
General Specifications
Service valve for gas tanks, coupling to tank with 3/4” NPT thread, 3/8” flare outlet,
integrated excess-flow valve hand wheel for manual operation. NOM and UL certified.
R3 Code
311812
Model
2015
Connection to Tank
3/4” MNPT
Service Connection Pieces per Pack
3/8” MFLARE
20
Mod. 2022 Internal Spring Safety Valve
General Description
Internal spring safety valve, 1 3/4” ACME x 1” MNPT threads, for carburetion and/or
300-liter capacity gas stationary tanks. It ensures an adequate relief in the event of
excess pressure, thus avoiding the risk of accidents. It closes automatically upon
returning to safe levels.
General Specifications
Internal spring valve, 1 3/4” ACME x 1” MNPT threads. Relief capacity: 22.24 m3/min
(848 CFM). Aperture pressure: 250 PSI. Spring inside tank. NOM and UL certified.
R3 Code
Model
311808
2022
Connection to
Relief Capacity
Tank or Line
1” MNPT
22.24 m3/min / 848 CFM
Tank
Capacity
300 liters
www.iusa.mx
Pieces per
Pack
20
35
IUSA | Natural Gas and LP
XV. GAS CARBURETION TANK VALVES
Mod. 2006 Maximum Fill Valve
General Description
Maximum fill valve for carburetion tanks that allows to safely determine the maximum
level of liquid gas. Model 2006.
General Specifications
Maximum fill valve for carburetion tanks, coupling to tank with 1/4” NPT thread.
R3 Code
Model
Connection to Tank
311811
2006
1/4” MNPT
36
Pieces per Pack
20
XVI. GAS LEVEL INDICATORS
Stationary Tank Level Indicator
General Description
Level indicator for stationary gas tanks.
General Specifications
Level indicator for stationary gas tanks. Unbreakable plastic, replaceable dial.
Movement of indicator needle is caused by magnetic flow. 24” length, vertical
installation, UL certified.
R3 Code
311820
Model
2011-24
Length
24”
Connection to Tank
BRIDLED
Pieces per Pack
20
www.iusa.mx
37
IUSA | Natural Gas and LP
XVII. TEMPERATURE CONTROLS FOR WATER CONTROLS
IUSATROL
General Description
Automatic IUSATROL thermostat, designed to control water temperature in storage
and direct-flow water heaters.
General Specifications
Made of aluminum, 1/2” HNPT gas inlet connection,
Temperature control from 30° to 70°C ± 5°C.
R3 Code Inlet
495066
399312
1/2” HNPT
1/2” HNPT
Outlet to
burner
3/8” HNPT
3/8” HNPT
/ HNPT outlet connection.
3 8”
Outlet to pilot
7/16” UNS thread for 1/4” tube
24” thermo coupler and 880 E pilot
Pieces per
Pack
20
20
Semiautomatic Control For Water Heaters
General Description
Semiautomatic thermostat designed to manually control turn on/off of main burner in
storage-type water heaters.
General Specifications
Made of aluminum, allows to manually control turn on/off of main burner and shuts off
gas if the pilot goes off. 1/2” HNPT gas inlet connection, 3/8” HNPT outlet connection.
R3 Code
Inlet
311908
1/2” HNPT
38
Outlet to
burner
3/8” HNPT
Outlet to pilot
24” thermo coupler and 880 E pilot
Pieces per
Pack
20
XVIII. TEMPERATURE CONTROLS (ACCESSORIES)
Indicator Button
General Description
Model U-40 indicator button for Iusatrol thermostat.
General Specifications
Indicator button made of fire-resistant plastic.
R3 Code
Model
Pieces per Pack
311943
U – 40
100
Gas Flow Handwheel
General Description
Mod. U-6 gas flow handwheel for Iusatrol thermostat.
General Specifications
Gas flow handwheel made of flame-resistant plastic.
R3 Code
Model
Pieces per Pack
311941
U-6
100
Mod. 880E Pilot
General Description
Nail-type pilot.
General Specifications
A nail pilot is needed to start combustion in the burners of different devices.
R3 Code
Model
Pieces per Pack
311937
880 - E
100
Thermo Coupler
General Description
The thermo coupler helps detect the presence or absence of flame in a pilot, it
signals the thermostat to allow the burner to ignite or not.
General Specifications
The thermo coupler is a sensitive element vital to all water-heater thermostats. It
features a safety device (magnet or power unit), it converts caloric energy into an
electric current capable of energizing the magnet and thus operates the safety valve.
R3 Code
Model
311932
U - 57 - 24
Length
Pieces per Pack
24”
100
www.iusa.mx
39
IUSA | Natural Gas and LP
XIX. TORCHES FOR DISPOSABLE GAS CANISTERS
European-Type Torch For Disposable Canisters
General Description
European-type torch for disposable gas canisters, standard flame, for plumbing,
handicrafts, refrigeration, bakery, etc.
General Specifications
Features a very resistant metal handle and a fine thread that allows a better gradation
of flame measurement with its nozzle with a pre-adjusted air inlet that allows a better
combustion and operation.
R3 Code
339294
339287
Model
Model 901
Model 902
Pieces per Pack
10
10
CGA #600 Connection Torch
General Description
Disposable-canister torch with CGA #600 connection, standard-measurement flame,
recommended for plumbing, handicrafts, refrigeration, baking, etc.
General Specifications
Features a metal handle and a fine thread that allows a better control of the flame.
It features a nozzle with a pre-adjusted air inlet that allows a better combustion and
operation.
R3 Code
339291
339287
40
Model
901
902
Inlet
CGA #600
Pieces per Pack
10
10
PASTEJÉ HEADQUARTERS
Km 109, Carretera Panamericana
México – Querétaro
Jocotitlán, Edo. Méx.
C.P. 50700, México
For further information:
EXPORTS Tel +52 5118 1400 ext. 2210
[email protected]