CHEVROLET PARTS AND ACCESSORIES CATALOG

Transcription

CHEVROLET PARTS AND ACCESSORIES CATALOG
YEAR
MODEL
5.000
USED
LIST
BRAKE CONVERSION UNIT-SHOE UNIT-DRUM, H.D. Brake/Suspension
57-62 CORVETTE .................... ....................................
*NOTE: Consists of Drums, Fans and self-adjusting brake kits.
57-62 CORVETTE .................... SHOE UNIT, left, front................
57-62 CORVETTE .................... SHOE UNIT, right, front...............
57-62 CORVETTE .................... SHOE UNIT, left, rear ................
57-62 CORVETTE .................... SHOE UNIT, right, rear ...............
ANOTE: Includes automatic adjusting parts.
57-62 CORVETTE .................... DRUM, front .........................
57-62 CORVETTE .................... DRUM, rear..........................
tNOTE: Used with Heavy Duty Brake Conversion Unit 3823053.
5.001
PART
DESCRIPTION
3823053*
1
316.25
5462250At 1
546225lAt 1
5462252At 1
5462253At 1
50.45
50.45
53.45
50.45
3824056t
3824057t
2
2
220
.
22.00
2
4.05
2
2
2.25
3.39
2
4.30
2
2
2
2
2
3.39
3.60
5.65
5.30
8.35
2
1
1
9.75
4.55
4.55
2
2
2
1
1
1
1
4.30
5.80
8.70
28.30
28.30
4.24
4.24
1
5.15
1
1
1
1
1
2
1
1
1
5.15
4.60
4.60
6.50
6.50
8.55
5.65
5.95
3.60
1
28.30
1
1
1
1
28.30
3.60
5.95
5.00
PLATE ASSEMBL Y-SUPPO R T- P LATE-BRACKET, Brake Flange Front
Front
39
COE,
40-46 W, Y, M, 0 w/H.D. front axle
(see note Group 6.008),
46-49 SBC, 2 TON (1st design) .........
front (2314 dia, hole) ................ 3650720*
*NOTE: On 1946-49 models enlarge 4 holes to 9/ 6 I. D.
3
46-52 /4 TON (exc. D-D) ...............
front.............................. 3691418
49-50 PASS . .........................
front.............................. 3687700
49-50 SBC, 2 TON (2nd design),
51-52 UTILITY .......................
front(23/e dia. hole) ................. 3691427
51-54 PASS.,
53-62 CORVETTE (exc. H.D. Brake/Susp.)
front ............................. 3694865
51-55 '/2 TON (1st Ser.) ................
front.............................. 3694867
53-59 '/4 , 1 TON (exc. D-D) .............
front (four attaching holes Viz) ........ 3698327
53-63 D-D (exc. 2 TON, Ser. 10) ........
front (four attaching holes'/,6)........ 3698345
53-55 1'4 TON (1st Ser.) (exc. H.D.,SBC)
front . ............................. 3698979
53-55 1'4 TON w/H.D. (1st Ser.),
53-55 2 TON (1st Ser.),
55
SBC (1st Ser.) ..................
front .............................. 3698988
55-57 PASS . .........................
front,left......................... 3707945t
55-57 PASS . .........................
front, right ........................ 3849355
tNOTE: Upper knuckle attaching holes purposely omitted on late assemblies, interchangeability not affected.
55-59 '/ TON (2nd Ser.) ................
front.............................. 3714707
57-59 Ser. 3A w/4/WD .................
front (NAPCO 38-395)..............
3749124
57-59 Ser. 3E, 3G w/4/WD .............
front (Bendix 307832) ............... 3750738
57-62 CORVETTE w/H.D. Brake/Susp ..
front, left ......................... 3745559
57-62 CORVETTE w/H.D. Brake/Susp...
front, right ........................ 3745560
58
PASS ..........................
front,left......................... 3741831
58
PASS ..........................
front,right........................ 3741832
59-64 PASS.,
63-65 CORVETTE ....................
front, right ........................ 3858826
59-62 PASS.,
65
CORVETTE .............. . .....
front, left
3858825
60-61 Ser. 10 (exc .4/WD) ..............
front,left......................... 3766693
60-61 Ser. 10 (exc. 4/WD) ..............
front, right ........................ 3766694
60-63 Ser. 10 (4/WD) ..................
front, right (Bendix 310398) .......... 2408306
60-63 Ser. 10 (4/WD) ..................
front, left (Bendix 310397)........... 2408307
60-63 Ser. 20 (4-WD) .................
front (2 x 12%q) (Bendix 311035) ...... 2415061
60-62 Ser. 20 thru 30 (exc. 4/WD, D-D) ..
front, left ......................... 3761007
60-65 Ser. 20-30 (exc. D-D, 4-WD) .......
front, right ........................ 3817978
62-63 Ser. 10 (exc. 4/WD) ..............
front, left ......................... 3818707
63
SPT. CPE., (409) (RPO Z11),
63-64 CORVETTE w/Sp. Per...........
front, left ......................... 3841827
63
SPT. CPE. (409) (RPO Z11),
63-64 CORVETTE w/Sp. Per...........
front, right ........................ 3841828
62-63 Ser. 10 (exc, 4-. WD) ..............
front,right......................... 3902998
63-65 Ser. 20-30 (exc. D-D, 4-WD).......
front, left ......................... 3817977
63-64 PASS., CORVETTE (exc. Sp. Per.)
front, left ......................... 3820273
©-1967
Chevrolet Motor Division
General Motors Corporation
823
5.000-5.001
64-68
64-68
64-68
64-67
66-68
68
66-68
68
64-65
64-67
66-67
64-68
64-68
65-68
65-68
67-68
67
68
68
65-67
..................
..............
Ser. 10 (4-WD)
Ser. 10 (exc. 4/WD)
Ser. 10 (exc. 4/WD).....
.......
Ser. 20-30 (D-D) (exc. 11,000 lb.
axle)
Ser. 20-30 (exc. D-D, 4/WD),
Ser. 20-30 (D-D)
Ser. 20-30 (exc. D-D, 4/WD),
Ser. 20-30 (D-D)
G-10
G-10
G-10
Ser. 20 (4/WD)
Ser. 20 4/WD
PASS. (exc. Disc Brakes) ........
PASS. (exc. Disc Brakes) ........
G-20 ...........................
Ser. 30 w/11,000 lb. axle.........
G-10
G-10
CORVETTE w/H.D. Brakes ......
........................
.................
.................
...........................
...........................
...........................
..................
...................
...........................
...........................
65-67 CORVETTE w/H.D. Brakes ......
68
CORVETTE w/H.D. Brake .......
68
..............................
.........................
........................
front ..............................
front. left .........................
front, right ........................
front,left.........................
front, right ........................
front, left .........................
front, left (Bendix 314765) ...........
front, right (Bendix 314766) ..........
front, right ........................
front, left .........................
front ..............................
front ..............................
front
front, left
front, right
front L.H..........................
front R.H..........................
SUPPORT, front, left, brake caliper
adapter bracket
SUPPORT, front, right, brake caliper
adapter bracket
SUPPORT, fornt L.H. brk. caliper
adapter bracket
SUPPORT, front R.H. brk. caliper
adapterbracket
....................
....................
....................
....................
3851799
3849353
3849354
2
1
1
9.30
3.25
3.25
3843196
2
5.30
3882781
1
5.65
3882782
3833433
3882728
3882727
2461046
2461047
3898022
3898021
3889557
3873500
3931131
3931132
1
1
1
1
1
1
1
1
2
2
1
1
5.65
5.40
5.60
5.60
15.75
15.75
4.75
4.75
5.65
15.95
5.75
5.75
3882783
1
6.30
3882784
1
6.30
3925397
1
10.25
3925398
1
10.25
Rear
38-50 UTILITY
.......................
38-50 UTILITY
.........................
.........................
46-52 '/4 TON
46-52 3/4 TON
51-54 PASS.,
53-55 CORVETTE,
51-55 Y TON (1st Ser.) ................
51-55 UTILITY (1st Ser.) ..............
15-55 UTILITY (1st Ser.) ..............
53-59 '/4 TON (exc. Prop. Brake,
7 x 17.5 tires),
60-67 Ser. 2 0 (D-D) w/3-SPD.,
60-67 Ser. 20 (4/WD) ........... . ..... .
53-59 '/4 TON (exc. Prop. Brake
7 x 17.5 tires),
60-67 Ser. 20 (D-D) w/3-SPD.,
60-67 Ser. 20 (4/WD) ............... .
53-55 1 TON (1st Ser.) (exc. Prop.
Brake),
54-55 1 TON w/Prop. Brake (1st Ser.),
55-59 1 TON (2nd Ser.),
55-57 D-D w/7.50-17, 7.00-18 tires
(2nd Ser.),
56-59 D-D w/8-19.5 tires,
56-59 D-D w/14" Brake or Duals ........
53-59 1 TON,
55-57 D-D w/7.50-17, 7.00-18 tires
(2nd Ser.),
56-59 D-D w/8-19.5 tires,
56-59 D-D w/14 brake or duals .........
55-58 PASS.,
55-62 CORVETTE (exc. H.D.,
Brake/Susp.),
1
55-58 / TON (2nd Ser.) (exc. P/Trac.) ..
55-58 PASS.,
55-62 CORVETTE (exc. H.D.
Brake/Susp.),
55-58 V2 TON (2nd Ser.) (exc. P/Trac.) ..
rear, left (w/wheel cyl. adj. shaft,
pinion and spring) ...............
rear, right (w/wheel cyl. adj. shaft,
pinion and spring) ................
rear, left ..........................
rear, right .........................
592169
1
6.80
592170
3680947
3680948
1
1
1
6.80
2.80
2.80
rear, left ..........................
rear, left (w/hold down bolt nut) ......
rear, right (w/hold down bolt nut).....
3693451
3698357
3698358
1
1
1
4.38
15.95
15.95
rear, left ..........................
3843627
1
5.30
rear, right .........................
3843628
1
5.30
rear, left ..........................
3717669
1
8.35
rear, right .........................
3717670
1
8.35
rear, left ..........................
3708841
1
4.10
rear, right .........................
3708842
1
4.10
5.001
©_1967
824
55-59 '/, TON w/Prop. Brake (2nd Ser.)
(exc. D-D w/7.50-17 tires, duals,
14" brake),
60-62 Ser. 20 (D-D) (exc. 3-SPD.),
63
Ser. 20 (D-D) w/3-SPD., 4-SPD.,
64
Ser. 20 (D-D) w/3-SPD. H.D.,
4-SPD
rear
3843629
2
rear, left .
3745613
1
57-62 CORVETTE w/H.D. Brake/Susp. • .
rear, right
3745614
1
58-59 '/ TON w/P/Trac
rear,left.......................... 2346817
1
58-59 Y TON w/P/Trac
rear,right......................... 2346816
1
59
PASS., '/ TON (exc. '/z TON
w/P/Trac.),
60-62 PASS., Ser. 10,
63
PASS.,
63
Ser. 10 (4-WD) (1st Ser.)
rear, left
3896883
1
59
PASS., Y TON (exc. '/2 TON
w/P/Trac.),
60-62 PASS., Ser. 10,
63
Ser. 10 (4/WD) (1st Ser.),
63
PASS . .........................
rear, right
3896884
1
60-64 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D, 4/WD)
rear, left.......................... 3760201
1
60-64 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D 4/WD)
rear,right......................... 3760202
1
60-64 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD)
rear,left.......................... 3760213
1
60-64 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD)
rear,right......................... 3760214
1
60-66 Ser. 30 .........................
rear .............................. 3856828** 2
*NOTE: On models prior to 1965, 3856834 anchor pin must also be used.
63-65 CORVETTE (exc. Sp. Per.).......
rear, left
3847719
1
63-65 CORVETTE (exc. Sp. Per.) .......
rear, right
3847720
1
63-64 CORVETTE w/Sp. Per.
rear, left
3847721
1
63-64 CORVETTE w/Sp. Per .........
rear, right
3847722
1
63
Ser. 10 (exc. 4/WD),
63
Ser. 10 (4/WD) (2nd Ser.) .........
rear, left (fused center)
3838241
1
63
63
Ser. 10 (4/WD) (2nd Ser.) .........
rear, right (fused center)
3838242
1
Ser. 10
63
rear, left (bolted center)............. 3859655® 1
63
Ser. 10
rear, right (bolted center)............ 3859656® 1
®NOTE: Use with differential carriers 3847754 on ser. 10 (exc. 4/WD), and 3847755
on ser. 10 (D-D) for 1963 models only.
64-68 PASS . .........................
rear,left.......................... 3847723
1
64-68 PASS . .........................
rear, right......................... 3847724
1
64-66 (4/WD),
64-66 Ser. 10 (exc. leaf type springs),
67-68 Ser. 10, G-20
rear, left
. .. . .. . . . .. 3840929
1
64-66 (4/WD),
67-68 Ser. 10, G-20
rear,right......................... 3840930
1
64-68 G-10 w/3.36-4.11 ratio...........
rear,]eft
3839421
1
64-68 G-10 w/3.36-4.11 ratio...........
rear, right
3839422
1
64
G-10 (exc. 3.36 ratio)............
rear, left ..........................
3853837
1
64
G-10 (exc. 3.36 ratio)............
rear, right ......................... 3853838
1
65-67 Ser. 20 (exc. D-D, 4/WD, leaf type
springs) ......................
rear,left.......................... 3857067
1
65-67 Ser. 20 (exc. D-D, 4/WD, leaf type
springs) ......................
rear,right......................... 3857068
1
65-66 Ser. 10 w/leaf type springs (exc.
4/WD) .......................
rear,left.......................... 5465066• 1
4/WD) .......................
rear, right ......................... 54650670 1
4/WD) .......................
rear, left.......................... 5465068• 1
4/WD) ......................
rear, right......................... 5465069• 1
67
Ser. 30 (exc. 11,000 lb. axle) .....
rear, left .......................... 3898049
1
67
Ser. 30 (exc. 11000 lb. axle) ......
rear, right ......................... 3898050
1
67
Ser. 30 w/11000 lb. axle).........
rear, left .......................... 3901219
1
67
Ser. 30 w/11000 lb. axle).........
rear, right ......................... 3901220
1
........................
........... ....
............ ...
..........
..............................
.........................
.........................
5.30
20.15
20.15
7.00
7.00
..........................
.........................
..................
...................
.............
.............
..........
.........................
.........................
...................
...................
©-1967
..........................
.........................
..........................
.........................
.............
............
...............
..........................
.........................
5.40
5.40
5.40
5.40
8.30
4.25
4.25
20.15
20.15
5.20
5.20
5.95
5.95
4.25
4.25
4.95
4.95
4.01
4.01
4.95
4.95
5.40
5.40
7.85
7.85
13.50
13.50
7.75
7.75
15.00
15.00
5.001
825
................... .
....................
....................
....................
....................
....................
65-67 CORVETTE
65-67 CORVETTE
65-67 CORVETTE
65-67 CORVETTE
65-67 CORVETTE
65-67 CORVETTE
67
PASS. w/Disc. Brake adapter .....
67
PASS. w/Disc. Brake adapter .....
CORVETTE
68
68
CORVETTE
....................
....................
5 .00 2
.................
................
PLATE, parking, left
PLATE, parking, right
BRACKET, left rear caliper adapter ....
BRACKET, right rear caliper adapter ...
BRACKET, left front caliper adapter ....
BRACKET, right front caliper adapter ...
BRACKET, left front caliper
BRACKET, right front caliper..........
BRACKET, front L.H. caliper adapter...
BRACKET, front R.H. caliper adaoter...
...........
5465982
5465983
3864113
3864114
3864115
3864116
3898013
3898014
39284649
3928650
1
1
1
1
1
1
1
1
1
1
4.25
4.25
9.95
9.95
3.25
3.25
2.65
2.65
3.25
3.25
3708832
4
.20
596565
4
1.50
599843
4
.25
3693612
4
.15
BOLT-SHIELD-COVER-SPACER-GASKET-NUT, Flange Plate
38-39 ALL (exc. HA, JA, COE),
40-42 WB, WC, YR, YS, YT, MR, MS
(exc. H.D.),
40-52 COMM., WA (exc. D-D),
46-50 1'/2 TON (exc. SBC, H.D.) ........
53-59 '/ TON
38-42 UTILITY (exc. COE, H.D.),
46-50 1''z TON (exc. SBC)
46-52 'M 1 TON (exc. D-D)
39-48 PASS. (exc. JB, KB)
........................
..............
.............
............
KB,
40
51-54 PASS.,
Brake/Susp.)
46-52 3/4 1 TON,
53-62 3/4 TON (exc. 14 1 ' brake)
46-50 D-D, SBC, 2 TON
51-52 D-D, UTILITY
46-50 SBC, 2 TON
51-52 UTILITY
51-54 PASS
53-62 CORVETTE
51-53 '/2 TON
.................
..........
...............
..................
....................
.......................
..........................
....................
.........................
51-55 UTILITY (1st Ser.) .............
53-59 ?4, 1 TON (exc. D-D) ............
53-55 ?a, 1 TON (1st Ser.) (exc. D-D) ...
53-63 D-D (exc. Ser. 10) ...............
53-64 D-D (exc. Ser. 10) ...............
53-56 1 TON,
58-59 1 TON,
55-62 D-D w/14" brake (2nd Ser.) .......
53-55 1 1/2 TON (1st Ser.) (exc. SBC, H.D.)
53-55 1'h TON (1st Ser.) (exc. SBC, H.D.)
53-55 1'2 TON w/H.D. (1st Ser.),
53-55 Ser. 4 (SBC) (1st Ser.) ...........
53-55 Ser. 5-6 (lst Ser.),
53-55 1'2 TON w/H.D. (1st Ser.),
67
Ser. 30 (D-D) w/11,000 lb. axle...
53-55 Ser. 4 (SBC) (1st Ser.),
53-55 Ser. 5-6 (lst Ser.),
67 Ser. 30 (D-D) w/11,000 lb. axle ...
54-55 ' Z TON (1st Ser.) ................
55-62 PASS.,
63-64 PASS., CORVETTE,
CORVETTE (exc. disc. brakes).
65
55-62 PASS.,
65-67 CORVETTE (exc. disc. brakes) ...
55-64 PASS.,
56-62 CORVETTE ....................
55-62 PASS . .........................
55-59 1/z TON (2nd Ser.) ...............
55 'i TON (2nd Ser.) ................
55-59 3/4 , 1 TON (2nd Ser.) (exc. D-D) .. .
58-59 'i TON w/P/Trac,
65
Ser. 10 w/leaf type springs .......
frt. flange, short ('/ 6 -20 x 2°/32 hex.
head) ...........................
plate to strg. knuckle (418 O.L.,
w/ 14-20 thds. on both ends) .......
plate and strg. arm to strg. knuckle
( r/ b -20 x 2 47/64 hex. head) .........
frt. flange, short ('/ 6 -20 x 2 hex. hd.)
1
rear flange to hsg. ( 4-20 x 1-300M) . .
flange (4Y long w/ 94 6 -18 thds. one
end-'4-20
other end) .............
1
flange (3 4 long w/ g4 6 -18 thds, one end
'/ -20 other end) ................
frt. flange, long ('/ 6 -20 x 2146
hex. hd) .........................
frt. flange, long ('/-20 x 3B144
hex, hd,) ........................
rear flange (°/ 6 -18 x 1'% hex, hd.) ....
frt. flang, short ( 1/2-20 x 1 1/2) .........
frt. flange, long ( 1/2-20 x 2 3/4 ) ........
frt. flange, short (°/16 -18 x 1 3/4) .......
frt. flange, long (°/16 -18 x 2 15/,) ......
1
rear flange to hsg. ( 4-20 x 1'/) ......
frt. flange, short ( 1/2-20 x 1 3/4 hex. hd.)
frt. flange, long ( 1/z-20 x 3 1/3 , hex. hd.)
217208
8 (8.900)
3678198
4
1.50
3678199
4
1.50
3693621
4
.15
3694247
4
3750740 12
3697429
4
3697430
4
4
3697447
3697448
4
.40
.50
.20
.20
.35
.40
453125 A.R.(8.900)
3698982
4
.20
3698983
4
.20
frt. flange, short ( 9/,,,-18 x 2 1/, hex.
hd.) ..............................
3698992
4
.40
3698993
3708833
4
4
.50
.40
3748370
2
.20
3748401
2
.20
7
frt. flange, long (°/ 6 -18 x 3 /„ hex. hd.)
frt. flange, long ('/,-20 x 4344 hex. hd.)
front flange, short ('4,,-20 x
31
1 /„) , , , ,
front flange, long ('/ 6 -20 x 2 15/64 )
rear flange plate ( ;/8 -24 x 13/6)....... 3788231
8
.15
plate to steering knuckle ('/-16 x 1 1/2)
454906 A.R.(8.900)
1
s
frt. flange, long ( /z-20 x 4 /,,) ....... 3712916
4
.40
rear flange ('4-24 x "4,) ......... _ ..
3697704
8 (5.531)
frt. flange, long ( 1/2-20 x 2'/,) ........ 3713022
4
.20
rear flange ('/-20 x 1'/4 ) .............
5.001-5.002
2346841
8
.28
4-1967
826
64
CORVETTE w/Sp. Per...........
64-67 Ser. 20-30 (D-D) (exc. 11,000 lb
axle) ........................
64-68 G-10 ...........................
plate to steering knuckle
1
( /4
-20
5
X /6) .
3770308
6
front flange (long) ('/ 6 -18 x 3!i,) ..... 3843236
4
frt.flange plate to brake assy.
('/ 6 -20 x 2'/,) .................... 3882722
4
1
65-68 PASS . .........................
front flange plate ( 4-20 x 24 hex. hd.) 3871512 A.R.
1
65-67 PASS . ............... .
frt. flange plate ( /- 20 x 25/32 hex. hd.) 3871554* A.R.
*NOTE: Do not use std. part in place of 3871554
63-64 CORVETTE,
65
CORVETTE (exc. disc, brakes). ..
rear flange elate ('G-24 x 2'/, r a k4
(0.206)
.40
.15
.20
.20
5.004 BRACKET, Front Broke Flange Radius Rod
38
HA ............................
left (forged 475545) .................
475545
1
2.26
©-1 967
827
5.002-5.004
5.017 SHOE,
Brake, with Facing
38-50 PASS., 'i TON (exc. FC),
38-42 '/4 TON (exc. JE, KE, AM, BM) ....
front and rear,
38-42 HE, JE, KE, KF, AM, AN, BM, BN,
46-52 % TON (exc. D-D) ...............
front (bonded type) .................
38-50 PASS., '/, TON,
38-42 '44 TON (exc. JE, KE, AM, BM)....
front and rear,
38-42 HE, JE, KE, KF, AM, AN, BM, BN
rear,
39
COE,
40-52 UTILITY .......................
front (riveted type) ................
39
COE,
40-50 UTILITY .......................
rear .............................
®NOTE: Also used on V, W equipped w/cast iron brake drums.
46-52 3 TON .........................
rear,
46-52 1 TON, D-D ....................
front (bonded type) .................
46-52 1 TON .........................
rear (bonded t y pe)..................
46-52 1 TON .........................
rear (bonded type) (.030 O.S. facing)..
51-55 UTILITY (1st Ser.) ..............
rear (color ident.) ..................
3681129
A.R.
2.52
369459Q®
4
4.25
3660048
4
5.90
3681116 A.R.
3681166
4
3697830
4
3720010
4
4.25
5.50
4.80
8.15
SHOE UNIT, Broke, with Facing, Non-Metallic
51-58 PASS.,
/2
51-59
TON (exc. 3A w/4/WD),
60-62 Ser. 10 (exc. 4/WD),
53-62 CORVETTE (exc. H.D. Brake/
Susp.) ...
front,
...........
58-59 1/2 TON (exc. P/Trac.),
59-62 PASS. (exc. H.D.),
60-62 Ser. 10,
63
PASS., CORVETTE (exc. Sp./Per.,
H.D.),
64-67 PASS. (exc. Police, H.D.),
64-65 CORVETTE (exc. Disc. Brake) ...
rear (primary and secondary) ......... 3849026
51-58 PASS., '- TON .................
rear (bonded type),
53-62 CORVETTE (exc. H.D. Brake/Susp.)
(primary and secondary) ............. 3752313
51-58 PASS.,
51-64 Ser. 10,
53-60 CORVETTE (exc. H.D. Brake/
Susp.) .......................
front,
59
z TON (exc. P/Trac.),
59-67 PASS.,
60-64 Ser. 10 .........................
rear (bonded type) (primary and second64
CORVETTE ....................
ary) (.030 O.S. facings—grooved) ... 3849062
51-58 PASS., !2 TON,
rear (bonded type) (primary and
Brake/Susp.) .................
secondary (.030 O.S. facing)....... 3754070
53-59 '4 TON (exc. 7.50 x 17, 8 x 19.5
tires, duals, 14" brake),
60-67 Ser. 20 (4/WD, D-D) .............
rear (primary and secondary),
3
53-59 /,, 1 TON,
60-63 Ser. 20-30 (D-D),
64-67 Ser. 30 (D-D),
64-67 Ser. 20 (4/WD, D-D) .............
front (primary and secondary) ........ 3848106
53-59 1 TON,
55-59 D-D w/7.50 x 17 tires, duals, 14"
rear (riveted type) (primary and
brake........................
secondary) ...................... 3742396
57-59 Ser. 3A w/4WD ..................
front (primary and secondary) ........ 3750757T
57-59 Ser. 3E, 3G w/4WD ..............
front (primary and secondary) ........ 3751486t
TNOTE: Facings must not be mixed on any one axle.
53-55 UTIL (1st. Ser.) .................
front (riveted type) (primary and
secondary) (no color ident.) ........ 3877022
58-59 'Z TON w/P/Trac ................
rear (primary and secondary).........
2405962
59-68 TAXI, H.D ......................
front (primary and secondar y ) ........ 3851790
59-68 TAXI, H.D ................. ....
rear (primary and secondary) .........
3852220
59-62 PASS.,
63-68 PASS. (exc. TAXI, H.D. Chassis
Disc Brakes, Metallic Linings)..
front (primary and secondary) (I1 x
63-65 CORVETTE (exc. Sp./H/Per.) ....
2% lining) ...................... 3849027
3849027
59-67 PASS . .........................
front (primary and secondary)
64
CORVETTE ....................
(.030 O.S.) ...................... 3849056
60-63 Ser. 10 (4-WD) ..................
front (Bendix 310621) ............... 2405958
5.017
828
1
10.75
1
10.05
1
11.35
1
12.50
1
17.60
1
1
1
21.00
12.65
15.50
1
1
1
1
19.50
12.50
13.30
11.40
1
12.35
1
1
13.00
14.00
©_1967
60-63 Ser. 20 (4-WD) ..................
60-66 Ser. 30,
67
Ser. 30 (exc, 11,000 lb. axle)
P/Trac.) .....................
63
Ser. 10 .........................
63
Ser. 10 (exc. 4/WD) ..............
64-68 Ser. 10 .........................
67-68 G-20 ...........................
60-63 Ser. 20 (exc. 4/WD, D-D) .........
64-67 Ser. 20 (exc. D-D, 4/WD leaf type
springs) ......................
60-63 Ser. 20-30 (exc. 4/WD, D-D) ......
64-67 Ser. 30 (exc. D-D),
68
Ser. 20-30 (exc. 4/WD)...........
64-65 G-10 ..........................
65-68 G-10 ...........................
64
G-10,
65-68 G-10 w/3.36, 4.11 ratio, 2400 lb.
axle .........................
65-67 CORVETTE w/H.D. Brakes ......
65
CORVETTE w/Disc Brake (exc.
front (primary and secondary) (Bendix
310639) .........................
2405960
1
21.00
3898921
1
22.50
3840163
1
11.15
3907118
1
10.95
front ..............................
front ..............................
front ..............................
3846298
3846099
3886395
1
1
1
17.75
12.95
14.00
rear (bonded) ......................
3846098
5452515
1
1
13.15
N.L.
5452513*
1
18.25
5467285
5468092•
54658141
1
2
2
10.90
5463160
5463191
3881471
3881550
3907117
5468768
2
1
2
1
2
1
75.00
18.20
18.50
28.85
16.75
1
16.75
1
1
21.35
25.25
1
N.L.
1
19.25
1
1
2
2
33.50
31.90
15.60
15.60
rear,
front (primary and secondary) ........
front and rear,
rear,
front and rear,
front (primary and secondary),
66-68 CORVETTE (exc. H.D.)..........
frt. and rear (riveted) ...............
*NOTE: In order to service all four wheels, two units must be acquired.
65-67 CORVETTE ....................
parking brake ......................
65-66 Ser. 10 w/leaf type springs .......
rear (primary and secondary) .........
rear (primary and secondary) ........
65-68 CORVETTE H,D. Brakes w/Disc
Brakes.
............
front..........
67
PASS. w/Disc Brakes.
.....
front .............................
67
Ser. 30 (D-D) w/11,000 lb. axle ...
67
Ser. 30 (D-D) w/11,000 lb. axle ...
rear
67-68 G-20 ...................
68
PASS. w/Disc Brakes............
front ..............................
18.00
SHOE UNIT —SHOE ASSY., Brake, with Facing, Metallic
53-59 CORVETTE,
Brake/Susp.),
57-58 PASS ..........................
front (primary and secondary).
59-68 PASS . .........................
rear (primary and secondary) (11 x 2)
63-64 CORVETTE ....................
(welded) ........................ 3794194
53-62 CORVETTE,
57-58 PASS . .........................
rear (primary and secondary) (11 x 1i)
3798312
57-62 CORVETTE w/H.D. Brake/Susp .
front (primary and secondary) (11 x 2Y2) 3798310
57-60 CORVETTE w/H.D. Brake/Susp.. ,
rear (cerametalix type) (primary and
secondary) .............
.... 3745523
59-67 PASS . .........................
front (primary and secondary) (welded)
63-64 CORVETTE ....................
(11 x 2'/,)........................ 3794191
63-64 CORVETTE w/Sp./Per...........
front (primary and secondary)
(11/64x 2 3/,) ..................... 3846286
63-64 CORVETTE w/Sp,/Per...........
rear (primary and secondary)(11"/, x 2) 3846287
63
SPT. CPE. (RPO Zll)...........
SHOE ASSY., rear, primary
5464197
63
SPT. CPE. (RPO Z11), , , , , , , , , , ,
SHOE ASSY., rear, secondary
5464198
NOTE: Metallic linings are double sintered as compared to the single and much larger
sintered cerametalix linings.
5.018 FACING UNIT, Brake Shoe
38-48 PASS., COMM...................
38-42 HE, JE, KE, KF, AM, AN, BM, BN
39-40 COE,
40
WB, WC w/H.D.,
41-50 UTILITY ,,,,,,,,,,,,,
39-40 COE,
40
WB, WC w/H.D.,
41-50 UTILITY,,,,,,,,,,,,,,
frt. and rear (front only on jobs w/14"
rear brakes) (8 facings)...........
rear,
603872 A.R.
8.00
front.............................
605379
1
8.50
rear brake .........................
605380
1
12.55
©-1967
829
5.017-5.018
.............. .
..............
................. .
.............
53-55 1 z TON (1st Ser.)
67
Ser. 30 (D-D) w/11000 lb. axle ... .
51-55 UTILITY (1st Ser.)
57-59 Ser. 3A w/4WD
57-59 Ser. 3E, 3G w/4/WD
58-59 Ser. 3 (exc. /2 TON),
60-64 D-D (exc. Ser. 10) ...............
58-59 Ser. 3 (D-D) (exc. 14" brake duals),
58-59 Ser. 3E,
60-67 Ser, 20 (D-D) ...................
60-63 Ser. 20 (4/WD),
65-67 Ser. 20 (4/WD)
60-66 Ser. 30 (D-D) ...................
64
Ser. 20 (4/WD) ..................
..................
...............
..................
58-59 '/2 TON w/P/Trac
60-63 Ser. 10 (4/WD)
60-63 Ser. 20 (4/WD) ..................
............
..........
.......................
38-50 UTILITY, SD, ES, FS
38-48 GE, HE, JE, KE, KF, AM, AN,
BM, BN, DR, ER, FR
51-52 UTILITY
front brake (primary and secondary)
(no color ident.)
rear brake (no color ident.)
front, primary and secondary.........
front, primary and secondary .........
....................
..........
3877033T 1
3877034t 1
3750754f 1
3750750t 1
9.30
19.45
7.10
7.10
front brake (rivited type),
front and rear (primary and secondary),
rear (primary and secondary),
front (primary and secondary),
front and rear (primary and
secondary)
rear brake (primary and secondary)....
front (Bendix 310624)
front (primary and secondary) (Bendix
310642) .........................
......................
...............
3703507
2405961
2405957
1
1
1
9.10
6.20
6.20
2405959
1
8.45
front and rear,
rear only,
front only ( 94 4 O.D. x 23/64 O.L.
w/% hd.) ........................
51-55 UTILITY (1st Ser.),
60-67 Ser. 30 .........................
DR, ER, FR,
38-48 PASS.,
38-39 COMM. (exc. HE, JE),
40-42 KC, KD, AK, AL, BK, BL ........
57-59 Ser. 3 w/Prop. Brake,
60-62 Ser. 20
60-62 Ser. 20-30 (exc. 4/WD),
63
Ser. 20-30,
64
Ser. 20-30 (exc. 4/WD)
..............
.........................
...........
3
3
rear only ( /6 x 4) ..................
354111 A.R.100/1.00
3694529 A.R.100/1.00
front only,
front and rear,
rear,
9
frt. ( /64 O.D.- 2 144 O.L. w/ 3/e hd.)......
3698904 44 100/1.00
rear..............................
3694528
4
15
475511
A.R.
.30
rear,
front ..............................
477474
front,
rear ............................... 3680890
A.R.
.40
A.R.
.50
5.020 PIVOT, Brake Shoe
..............
5.026 SPRING—PIN—KIT, Brake Shoe
38-42 PASS., COMM. (exc. H.D., 1 TON),
46-50 PASS., Y TON
DR, ER, FR, GR, HR, JR, KR..
38-50 UTILITY
39-42 JE, KE, AM, BM,
38-52 1 TON .........................
51-52 UTILITY
46-52 1 TON, D-D
46-52 '/, TON
..................
.......................
.......................
....................
.........................
front and rear,
front ..............................
front and rear,
5.018-5.026 830
©-1967
51-55 PASS., CORVETTE, Y TON......
56-57 PASS., CORVETTE, Y TON (exc.
H.D. Brake/Susp. Ser. 3A
w/4/WD),
58-59 PASS., CORVETTE, '/ TON (exc,
metallic linings, H.D. Brake/Susp.
TON w/P/Trac.),
60-67 PASS., CORVETTE (exc. H.D.
Brake/Susp.),
60v68 Ser. 10 thru 30 (exc. 4/WD. D-D),
61-68 Ser. 10 (D-D),
64-68 Ser. 10 (4-WD),
67-68 PASS., (exc. TAXI, POLICE,
metallic linings, Disc brakes),
67-68 G -20,
68
Ser. 20-30 (D-D)
57-59 PASS., CORVETTE, '/ TON (exc.
H.D. Brake/Susp., metallic
linings, '/ TON w/P/Trac.),
60-67 PASS., CORVETTE (exc. H.D.
Brake/Susp., Disc Brake),
60-66 Ser. 10,
60-67 Ser. 20 (exc. 4/WD, D-D, leaf
type springs),
65-68 Ser. 10, G -20,
67-68 PASS. (exc. TAXI, POLICE,
metallic linings, Disc brakes),
68
Ser. 30 w/11000 lb. axle (exc. D-D)
56-62 PASS.,
56-62 CORVETTE (exc. metallic linings,
H.D. Brake/Susp.),
56-59 '/2 TON,
61-63 Ser. 10 (D-D),
60-63 Ser. 10 thru 30 (exc. D-D, 4/WD),
64
Ser. 30 (exc. D-D)
51-59 PASS., CORVETTE, 1/ TON (exc
Y2 TON w/P/Trac.),
60-62 PASS., CORVETTE
60-63 Ser. 10 (4/WD, D-D)
60-63 Ser. 10-20 (exc. 4/WD, D-D) ......
60-63 Ser. 30 (exc. D-D)
57-59 Ser. 3E-3G w/4/WD,
60-63 Ser. 20 (4/WD)
65-66 Ser. 20 w/leaf type springs...... .
51-55 ALL w/Prop. Brake (1st Ser.),
67
Ser. 30 w/11000 lb. axle .........
53-59 '/4 TON (exc. 14" brake, duals on
D-D),
53-59 1 TON
60-68 Ser. 20-30 (D-D, 4/WD).......... ,
60-68 Ser. 20 (D-D, 4/WD)
65-66 Ser. 30 (D-D)
53-59 1 TON,
55
D-D w/7.50-17, 7.00-18 (2nd Ser.)
56-59 D-D w/14" brake, duals (exc.
3-SPD.),
67
Ser. 30 (D-D) w/11,000 lb. axle ...
53-59 3/4 , 1 TON,
60-63 D-D (exc. Ser. 10)
60-63 Ser. 30 (exc. D-D),
60-63 Ser. 20 (4/WD),
64
Ser. 30
57-62 PASS. w/metallic linings (exc.
H.D. Brake/susp., P.G.).......
57-62 PASS. w/metallic linings,
59-62 CORVETTE w/metallic linings
(exc. H.D. Brake /Susp. P.G.)...
.................
...............
.............
.............
...............
..................
..............
..............
.........................
..............
...................
..............
...............
..............
.........................
C-1967
pull back, front and rear, primary and
secondary,
pull back, front, primary,
trans. park brk. shoe
................
3694822 A.R.
27
pull back front secondary............
3739278
15
adjusting screw, front and rear,
rear,
front and rear,
front(blue)
3707417 A.R.
30
pull back, front,
pullback, rear
497834 A.R.
frontand rear
3740932 A.R.
short, rear shoe (3'/ 6 O.L.—green) .... 3694516 A.R.
long, rear shoe (3 7/8 O.L.—black)...... 3694799 A.R.
.35
.50
.30
.30
........................
2
.....................
......................
parking, outer shoe
.................
pull back, front and rear,
front,
rear
rear (4 34 O.L.—maroon)
front brake,
..............
rear brake
.........................
3695836
1
.10
3697428 A.R.
.25
1416653
.30
4
front,
rear (3 23/32 O.L.—maroon)
.............
1416760 A.R.
front brake, secondary (yellow)....... 5456714
rear brake, primary and secondary,
front brake, primary (pink).........
2
5456715 A.R.
.30
.40
.40
5.026
831
Ser. 3Aw/4/WD,,,,
,
pull back, front
TON w/P/Trac ...............
pull back, rear (Bendix 31629) (blue),,
231586 A.R.
Ser. 3A w,/4/WD,
'z TON w P/Trac ................
shoe adj. screw....................
514277
1
Ser. 3E, 3G w/4/WD,
Ser. 10-20 (4/WD) ...............
adjusting screw front (Bendix 29716)..
497832
2
Ser. 10 (/WD) ...................
adjusting screw (Bendix 305546) .....
2408323
2
Ser. 10 (4/WD) ..................
pull back, front (Bendix 305545)...... 2408324 2
Ser. 30 .........................
front and rear,
2
3767138
4
Ser. 30 (exc. 11,000 lb. axle) .....
rear (5 %2 O.L.—orange) ............
PASS., CORVETTE (exc. metallic
linings, Disc Brakes, TAXI, H.D.),
64-66 Ser. 10 .........................
pull back, front secondary,
65-67 Ser. 20-30 (exc. D-D, 4/WD),
67-68 Ser. 10, G-10 ...................
(32'/32 O.L.—black)................... 3820277
2
63-68 PASS. (exc. metallic lings TAXI,
H.D.),
64-67 Ser. 10, G-20,
CORVETTE (exc. Disc. Brakes) ..
65
pull back, rear secondary (3 25/,, O.L.—
65-67 Ser. 20 (exc. D-D, 4/WD) .........
gray) ........................... 3820163
2
63-64 PASS., CORVETTE w/metallic
linings,
65-68 TAXI,
65-68 PASS. w/metallic brakes,
63-68 POLICE .......................
pull back, front and rear primary (red).. 3820179 A.R.
linings,
63-67 POLICE,
65-67 TAXI ..........................
pull back, rear secondary (red) ....... 3820180 2
linings,
65-68 TAXI (exc. H.D. Brake),
65-68 PASS. w/metallic linings.........
pull back, front secondary
65-68 POLICE (exc. H.D. brakes).......
(325/32 O.L.—green) .................. 3820284
2
63-64 PASS., CORVETTE (exc. Sp./Per.)
adjusting screw, front and rear
64-68 Ser. 10 ........................
(2 31/32O.L.—green),
64-67 Ser. 20 (exc. D-D, 4/WD),
67-68 G-20,
67-68 Ser. 10 (4/WD),
Ser. 20-30 (exc. 4/WD) ...........
68
front,
65-68 PASS.,
65-66 CORVETTE (exc. Disc. Brakes) ..
front and rear ...................... 3887347 A.R.
63
SPT. CPE. (RPO Zil)...........
adjusting screw, rear ............... 5464063
2
pull back, front and rear primary......
5462106 A.R.
pull back, front and rear secondary ...
5462107 A.R.
adjusting screw, front and rear.......
5462023 A.R.
64-68 Ser. 20 (D-D, 4/WD) ..............
65-68 Ser. 30 (D-D) ...................
adjusting screw, rear ............... 3843194 A.R.
64-68 Ser. 20 (D-D, 4/WD, leaf type
springs) ......................
pull back, front and rear secondary,
65-68 Ser. 30 (D-D) ...................
pull back, rear .................... 3843201 A.R.
64-68 G-10 ...........................
adjusting screw, front and rear ...... 5462500
4
64-68 G-10 ...........................
pull back, front and rear primary ...... 5462970 A.R.
64-68 G-10 (exc. metallic linings).......
pull back, front and rear secondary ... 5462958
2
65-67 Ser. 30 (exc. 11,000 lb. axle) .....
pull back, rear secondary ............ 3856843 2
65-67 S er. 30 ........................
rear brake shoe adjusting screw ...... 3856850
2
65-67 CORVETTE ....................
parking brake, pull back............. 5465943
4
65-67 CORVETTE ....................
parking brake adjusting screw ........ 5465944
2
67
Ser. 30 w/11000 lb. axle,
68
Ser. 30 w/11,000 lb. axle (exc. D-D)
adjusting screw friction rear ......... 3887372
2
67
Ser. 30 w/11,000 lb. axle.........
rear, pull back ..................... 3873449
4
67
Ser. 30 w/ 11,000 lb. axle .........
front, pull back secondary ........... 3873508
2
51-55 UTILITY (1st Ser.) ..............
PIN, rear shoe pull back spring ........ 3694545 A.R.
51-58 PASS., '/ TON (exc. metallic
linings),
53-62 CORVETTE (exc. H.D. Brake/Susp.
metallic linings) .............. KIT, front and rear,
59
PASS., '/2 TON ..................
front..............................
3740014 ® 1
®NOTE: Consists of 4 each Pull Back Spring, Hold Down Pin and Spring; 8 Spring Cups and
2 Adj. Hole Covers.
57-59
58-59
57-59
58-59
57-59
60-63
60-63
60-63
60-63
64-67
63-68
.30
.20
.41
.30
.35
.30
.30
.30
.60
.60
.60
.20
1.20
.50
.35
.50
.30
.30
.29
.31
.32
.30
.30
.38
.23
.15
.50
.25
.20
1.41
%-1967
5.026
832
Corporation
General Motors
57-58 PASS. w/metallic linings (exc.
cerametallix),
(exc. cerametallix, H.D. Brake/
Susp.) ...............
KIT, front and rear brake spring........ 3767670* A.R.
59
PASS., /TON (exc. '/2 TON
w/P/Trac.) ................... KIT, rear repair parts
60-62 PASS., '/TON,
62-63 Ser. 30,
63
63
Ser. 20 (exc. 4/WD, D-D),
64
Ser. 30 (exc. D-D) ...............
front repair parts ................... 3767668* 1
*NOTE: Consists of 4 each: Pull Back Springs, Hold Down Springs; 8 Hold Down Spring Cups;
12 Hold Down Pins and 2 Shoe Guide Plates.
3.16
1.50
5.028 SPRING, Brake Shoe Lever
38-50 UTILITY
46-52 1 TON, D-D ....................
38-52 HE, JE, KE, KF, AM, AN, BM,
51-52 UTILITY,
,,
46-50 PASS., ' TON ..................
DR, ER, FR, GR, HR, JR, KR ..
5.030
front and rear,
rear,
front ( 13/ 2 I.D. x
5
long) .............
477440 A.R.
.10
long) ....................
592417 A.R.
.10
477443 A.R.
.15
592418 A.R.
.15
475508 A.R.
.05
front ..............................
front and rear,
592419 A.R.
.25
rear,
front ..............................
front,
rear ..............................
477444
A.R.
.35
3680887
4
.30
front and rear retaining ..............
front brake shoe retainer............
5467815
187319
front brake shoe retainer ...........
5456841
/
front and rear,
front
i
(
'2
PIN —LOCK, Brake Shoe Friction Spring
38-50
39-42
38-52
51-52
38-42
46-50
38-52
UTILITY .......................
JE, KE, AM, BM,
1 TON .........................
UTILITY .......................
PASS., COMM. (exc. H.D., 1 TON),
PASS., Y TON ..................
HE, JE, KE, KF, AM, AN, BM, BN,
DR, ER, FR, GR, HR, JR, KR „
38-50 ALL... ,
51-52 COMM., UTIL (exc. '/ TON) , , , , , ,
51-52 3/4 , 1 TON .....................
front and rear,
rear,
front ( 3/8 x 1y,6).....................
front and rear,
front ( 3/8 x 1/64) .....................
LOCK, front and rear,
front,
rear ( / 6O.D.) .....................
5.034 PIN, Brake Shoe Link
46-50 PASS., '/ TON ..................
38-50 UTILITY,,,,,,,,,,,,,, ,
39-42 JE, KE, AM, BM,
38-52 1 TON .........................
51-52 UTILITY,,,,,,,,,,,,,
46-52 1 TON, D-D ....... ,
46-52 3/4 TON.........................
front and rear,
5.041 PIN, Brake Shoe
65-67 CORVETTE (exc. H.D.)..........
65-68 CORVETTE w/H.D. Brakes .......
67-68 PASS. w/Disc Brakes,
68
POLICE .......................
C-1967
A.R.
.61
2
(8.938)
1
.45
5.026-5.041
833
5.043
38-42
46-48
53-59
53-55
65
67
PIN UNIT — WASHER—NUT—BOLT UNIT — SPRING—RETAINER—LOCK,
Brake Shoe Hold Down
PASS., COMM ...................
PASS., '/z , '/4 TON ..............
1 TON .........................
UTILITY (1st Ser.),
G-10,
Ser. 30 (D-D) w/SGL. SPD. rear
axle.........................
55-59 D-D w/7.50 x 17 tires, duals, 14"
brake (2nd Ser.) (exc. 3-SPD.),
60-64 Ser. 30 .........................
55-59 3i„ 1 TON (2nd Ser.) (exc. 4/WD),
60-65 D-D (exc. Ser. 10) ...............
55-59 '/4 TON (2nd Ser.) (exc. D-D),
55-59 D-D (2nd Ser.) (exc. 7.50 x 17
tires, duals, 14" brake),
60-64 Ser. 20 (4/WD, D-D) ............
56-58 PASS., CORVETTE, '/Z TON
(exc. '/ TON w/P/Trac.),
59-62 CORVETTE (exc. metallic lining,
H.D. Brake/Susp.) .............
60-62 Ser. 10-20,
Ser. 20-30 (D-D) .................
62
53-60 CORVETTE w/metallic linings,
61-62 CORVETTE w/H.D. Brake Susp.,
metalliclinings ...............
57-59 Ser. 3A w/4/WD .................
57-59 Ser. 3E-3G w/4/WD,
60-62 Ser. 20 (4/WD) ..................
62-64 Ser. 30,
65-66 Ser. 30 (w/P/Trac., H.D. r.r.
Shocks),
65-66 Ser. 30 (D-D) ...................
60
CORVETTE w/H.D. Brake /Susp.
59
'/ TON w/P/Trac ................
53-55 % TON (1st Ser.) ................
53-55 1 TON (1st Ser.) ................
59
12 TON (exc. P/Trac.),
60-62 Ser. 20 (exc. D-D, 4/WD),
60-62 Ser. 10 .........................
',z TON (exc. 4/WD),
59
60-63 Ser. 20-30 (exc. D-D, 4/WD) ......
Ser. 10 (exc. D-D, 4 /WD) .........
63
Ser. 10,
64
65
Ser. 10-20 w/leaf type springs....
CORVETTE w/metallic brakes
64
(exc. SPT. CPE. w/Sp./Per.),
65-66 CORVETTE w/metallic brakes ....
51-58 PASS., CORVETTE, r/ TON
(exc. iz TON w/P/Trac.),
59-64 PASS., CORVETTE (exc.
metallic brakes),
65
CORVETTE (exc. Metallic
Brakes) ......................
64-65 Ser. 10,
64-65 Ser. 20-30 (D-D, 4/WD),
67-68 (4/WD) .........................
63-64 CORVETTE w/Sp./Per. .........
Ser. 20 (exc. D-D, 4/WD) .........
65
65-67 Ser. 20 (4/WD, D-D) .............
66-67 Ser. 20-30 (D-D) (exc. 11,000 lb.
axle) ........................
65-68 PASS. (exc. Disc Brakes,
Metallic Lining, TAXI,
POLICE.....................
65-67 CORVETTE ....................
65
Ser. 20-30 (exc. leaf type springs) .
front and rear (front only on jobs
w/14" rear brakes) ...............
rear,
3696830 A.R.
.10
3702978
8
.30
3718045
8
.20
front ..............................
3719280
8
.20
front and rear......................
front, w/spring.....................
3759941
3750342
8
4
.47
.30
rear, w/spring .....................
3750341
4
.30
front and rear ......................
rear ..............................
front and rear,
front,
3767678 A.R.
419973
2
.47
.65
rear ..............................
3845711
A.R.
.80
front and rear ......................
3794197
1
.42
3794200
8
.37
3794199
A.R.
.47
front..............................
3917941
A.R.
.60
front and rear ......................
parking brake ......................
front and rear pin spring .............
3917936
3865804
3865848
A.R.
1
A.R.
.60
.35
.15
front,
rear ..............................
front,
rear ..............................
front and rear,
front,
rear,
front,
front and rear,
front and rear,
front ..............................
front and rear,
rear ..............................
rear,
5.043
834
©_1967
w
......................... .
67
Ser. 30 w/11,000 lb. axle .........
/spring
3881496 A.R.
28
66-67 G-10-20
front..........................
3917940 A.R.
60
66-67 Ser. 10 (exc. 4/WD),
66
(4/WD),
67
Ser. 20-30 (exc. D-D, 4/WD) ......
front,
66
Ser. 20-30 (exc. D-D, 4/WD),
67
G-10-20,
67
Ser. 10,
67
Ser. 30 (exc. D-D, 11,000 lb. axle),
rear
3917938 A.R.
.60
67-68 PASS. w/Metallic Brakes,
67-68 POLICE, TAXI w/H.D. Chassis,
3.31 axle
front and rear...................... 3917937 A.R.
.60
67
Ser. 30 (D-D) w/11000 lb, axle ....
front and rear,
67
Ser. 30 157 w.B. w/11000 lb. axle .
rear
3917939 A.R.
,60
WASHER, bolt, rear................... 3694533 A.R.
.12
NUT, bolt, rear ('/-24 slotted hex.) .... 3694546 A.R.
.05
66-68 G-10
NUT, front and rear anchor pin (°4-18) . 9434987
2
(8.915)
BOLT UNIT, rear
3698458* A.R.
.65
*NOTE: Consists of: 1 Bolt ( 1/- 20 and 3/e -24 x 24 6 O.L.), 1 Nut ( 1/- 20), and 1 L/Washer.
60-63 Ser. 10 (4/WD)
SPRING (Bendix 47958)
2408322
4
.30
65
Ser. 10 w/leaf type springs ....... SPRING, rear
5464152
2
.23
67
Ser. 30 w/11,000 lb. axle ......... RETAINER, hold down pin
3882712
8
.15
67
Ser. 30 w/11,000 lb. axle......... LOCK, rear
3884948 A.R.
.05
........................
..............................
.....................
..............................
..............
..............
...........................
..............
..................
....................
...............
........................
............
..........................
5.045 PLATE, Brake Shoe Guide
51-66 ALL (exc. G-10),
67
PASS., Ser. 10
67
G-20,
67
Ser. 20 (exc. 327),
67
Ser. 30 (exc. 11,000 lb. axle) .....
67
Ser. 20-30 (exc. D-D),
68
Ser. 20 (4/WD)
linings (exc. H.D. Brake/Susp.),
63
PASS., CORVETTE
64-68 G-10
65-67 CORVETTE
..................
..................
.............
...........................
....................
front and rear,
rear,
front (21( O.L. x
1
16 4
thick)
..........
497812
A.R.
28
front and rear (2 / O.L. x'/ 4 thick).... 3764978 A.R.
front and rear (2 154 4 O.L. x 4 thick).... 5460399
2
parking brake shoe guide (1'/ O.L. x
3/
64 thick) ........................
5465949
2
30
.19
1
15
5.055 PIN—PIN UNIT, Brake Shoe Anchor
38-52
39-42
38-52
46-52
46-52
53-59
60-63
53-59
.......................
UTILITY
front,
JE, KE, AM, BM,
1 TON .........................
rear .............................
1 TON, D-D
front,
3
/4 TON
rear ('/4 x 1 '/64)
3
/4 , 1 TON,
Ser. 20-30 (D-D) .................
front,
'/4 TON (exc. 14 11 brake, duals on
D-D),
60-63 Ser. 20 (4/WD) ..................
rear (3 1/4 O.L.) .....................
tNOTE: Not used on 1955 D-D w/7.50-17, 7.00-18 tires, or 1956 D-D w/duals.
53-55 UTILITY (1st Ser.) ..............
front,
53-59 1 TON,
56-59 D-D w/14" brake or duals ........
rear ,,,,,,,,,,,,,,,,,,,,,
55-62 PASS.,
60-63 Ser. 10 (exc. 4/WD),
65
CORVETTE (exc. Disc Brake)...
front ..............................
55-62 PASS.,
56-61 CORVETTE,
60-63 Ser. 10,
62
CORVETTE (exc. H.D.
Brake/Susp.) .................
rear,
55-59 % TON (2nd Ser.) (exc. P/Trac.) ,
front and rear (2'/e O.L.) .............
57-59 CORVETTE w/H.D. Brake,
P/Trac.,
60-61 CORVETTE w/H.D. Brake,
(exc. PG.),
62
front and rear........
C-1967
....................
.........................
.....................
477448
2
40
3680889 2
35
37022211 A.R.
1.25
3699372
2
2.10
3820272
2
1.30
3705732 A.R.
1.35
5454791
2.10
4
5.043 -5.055
835
60-68 Ser. 20 (exc. 4/WD, D-D),
68
Ser. 20 (D-D) ...................
60-68 Ser. 30 (exc. D-D),
68 Ser. 30 (D-D) ...................
60-64 Ser. 30 .........................
63-67 PASS., CORVETTE (exc. Disc
Brake) .......................
64-68 Ser. 10, G-20 ...................
68
64-68 Ser. 10 (exc. 4/WD) .............
64-67 Ser. 20 (D-D, 4/WD) .............
64-67 Ser. 20-30 (D-D),
67-68 G-20 ..........................
64-67 G- 10 ...........................
front and rear,
front .............................
rear..............................
3841719
3767135
2
2
1.25
2.15
rear..............................
rear,
trans. park brk. shoe anchor rear .....
front..............................
rear,
3820146
2
1.30
3840650
3840699
2
2
1.30
1.30
front.............................
front and rear ( 2 23/64 O.L. w / 9/ 6 -18 x
3/
,thds.) .........................
front..............................
rear ..............................
front..............................
3843200 A.R.
1.35
3841173
3855003
3856834
3873504
1.30
1.30
2.95
1.85
65-68 PASS ..........................
65-67 Ser. 30 (exc. 11,000 lb. axle) .....
67
Ser. 30 (D-D) w/11,000 lb. axle .. .
51-54 PASS., '/Z TON,
53-56 CORVETTE,
55
'2 TON (1st Ser.),
57-59 Ser. 3A w/4/WD ................. PIN UNIT, front and rear,
57-62 CORVETTE (exc. H.D. brake) ....
front ..............................
*NOTE: Consists of 1 each: Anchor Pin, Washer, L/Washer, and Nut.
2
2
2
2
3696705* A.R.
1.65
3694704* A.R.
.10
3846589
2
.05
3840689
3767136
3867279
2
2
2
.05
.12
.05
358829
A.R.
.10
359380 A.R.
.10
3680888 A.R.
.10
3760300
5465995
5467056
.35
.15
.48
5.056 WASHER—LOCK—NUT—CLIP—BOLT, Brake Shoe Anchor Pin
51-54
53-55
55
57-59
56-62
PASS., '/, TON,
CORVETTE,
'/ TON (1st Ser.) ................
Ser. 3A w/4/WD,
CORVETTE ....................
*NOTE: Not used on rear axle on 195
55-64 PASS.,
60-65 Ser. 10 (exc. 4/WD),
64-65 CORVETTE (exc. Disc. Brake) ...
60-63 Ser. 20 (exc. 4/WD, D-D),
64-68 Ser. 20 (exc. 4/WD) ..............
60-63 Ser. 30 (exc. D-D),
64
Ser. 20-30 (exc. D-D, 4/WD),
64-68 Ser. 10 (exc. 4/WD),
64-68 Ser. 30 (exc. 11000 lb. axle) ......
64-68 Scr. 10, G-20,
64-67 Ser. 20 (4/WD) .................
60-64 Ser. 30 .........................
65-68 PASS . .........................
38-42 HD, JD, KD, AL, BL,
38-50 PASS., ',/ZTON ..................
40-42 KE, KF, AM, AN, BM, BN,
46-52 '/, TON (exc. D-D) ...............
38-54 UTILITY,
38-42 GE, HE, JE, KE, KF, AM, AN,
BM, BN,
46-55 1 TON, D-D (exc. FU, GU)
(1st Ser.) .....................
38-54 COMM., UTIL.,
67
Ser. 30 w/11,000 lb. axle .........
46-52 1 TON, D-D ....................
46-52 3/4 TON .........................
60-63 Ser. 20 (exc. 4/WD, D-D) .........
64-66 Ser. 20 (D-D),
67-68 G-20 ...........................
64-66 Ser. 30 (D-D),
67
Ser. 20-30 (D-D), (exc. 11000 lb.
axle) ........................
65-68 Ser. 10-20 ......................
68
65-67 CORVETTE ....................
65-68 CORVETTE ...................
front and rear,
front ..............................
-59 CORVETTE.
front ..............................
front and rear,
front,
rear ..............................
rear ..............................
front .............................
LOCK, front and rear,
front
(
i9
/ 2 O.D.)
....................
LOCK, rear,
front and rear (1 34 6O.D.) ............
LOCK, front,
rear (1 14 6O.D.).....................
NUT, rear,
front and rear,
front(%-16),
rear,
trans. park brk . ................... .
CLIP, parking lever pivot pin
BOLT, parking ( 14-20 x 2) ........... .
5.055-5.056
836
2
2
2
G -1967
5.075 PLATE, Brake Shoe Anchor
39-52
38-39
40-42
46-50
38-50
UTILITY w/H.D. frt. axle........
F, G, H, J (exc. GE, HE, JE),
PASS., KC, KD, AK, AL, BK, BL,
PASS.,
TON ..................
UTILITY .......................
5.100
57-62
57-62
63-64
63-64
58-62
front ..............................
3650718
2
1.80
rear ..............................
rear, left ..........................
475474
592411
2
1
.84
3.85
3764493
3764494
3821849
3821850
3767960
1
1
1
1
1
N.L.
N.L.
11.60
11.60
23.55
5462098 A.R
45
rear
5462099 A.R.
earrear
.. " ..................
"""""".
left, front and
5462740
1
right, front and rear ................. 5462741
1
left, rear,
left, front and rear,
.45
1.26
1.26
SCOOP—SCOOP UNIT, Brake Air
CORVETTE w/H.D. Brake/Susp. , ,
CORVETTE w/H.D. Brake/Susp. , ,
CORVETTE w/H.D. Brake/Susp...
left, rear .....................
right, rear ................... .
left, front ........................
ri ht, front
SCOOP UNIT, front ...................
5.103 LEVER—LEVER ASSY._PIVOT—CUP, Brake Shoe Automatic Adjusting
Sp. /Per.),
64-65 Ser. 10 (exc. 4/WD, leaf type sprgs. ),
64-65 Ser. 20 (exc. D-D, 4/WD),
65-66 PASS.,
65
CORVETTE (exc. Disc. Brake),
67-68 G-20 ...........................
65
Ser. 30 (exc. D-D, 4/WD),
67-68 Ser. 10, (exc. 4/WD)
67
PASS., (exc. 6 cyl. sta. wagon),
68
PASS (exc. Disc Brakes) .........
65-68 PASS.,
67
Ser. 10,
67
Ser. 20 (exc. D-D, 4/WD) ..... , ...
Sp. /Per.),
64-65 Ser. 10 (exc. 4/WD, leaf type
springs),
64
65-66 PASS., CORVETTE (exc. Disc.
Brake),
65-66 Ser. 20 (exc. D-D, 4/WD),
67-68 G-20 ...........................
65-66 Ser. 30 (exc. D-D, 4/WD),
67-68 PASS., (exc. Disc Brakes),
67
Ser. 10 (exc. 4/WD) ..............
65-68 PASS.,
67
Ser. 10,
, 4 /WD).........
67
Ser 20 (
DD
63-64 CORVETTE w /Sp./Per...........
64-68 Ser. 20 (D-D) ....................
64-68 Ser. 20 (4/WD) ..................
65-68 Ser. 20-30 (D-D) (exc. 11000 lb.
axle) .........................
64-68 Ser. 20 (D-D) ...................
64-68 Ser. 20 (4/WD) ..................
65-68 Ser. 20-30 (D-D) (exc. 11000 lb.
axle) .........................
64-68 G-10 ...........................
64-68 G-10 ...........................
65
Ser. 10 (exc. leaf type springs),
65
65
65-66 Ser. 30,
67
Ser. 30 (D-D) w/11000 lb. axle ....
67
Ser. 30 (exc. 11000 lb. axle),
68
Ser. 30 (exc. D-D),
68
Ser. 30 (D-D)(exc. P./Trac.)......
—1967
left, front,
rear ,,,,,
right, front and rear
right, front,
left, front. . . . .....................
right, rear,
right, front and rear,
5464009
1
38
right,front........................
left, front and rear ..................
right, front and rear.................
5464010
3823363
3823364
1
A.R.
A.R.
38
45
45
left, rear .........
5464917
right, rear ........................
.
5464918
" "" "" 5464918
1
1
38
38
1
55
left rear,
left, front ........................
837
3856853
5.075-5.103
65-66
67
67
68
68
66-68
68
66-68
68
67
67
65-67
65-67
65-67
65-67
67
67
68
68
63-64
Ser. 30,
Ser. 30 (D-D) w/11000 lb. axle....
Ser. 30 (exc. 11,000 lb. axle),
Ser. 30 (exc. D-D),
Ser. 30 (D-D) (exc. P./Trac.)......
Ser. 20-30 (exc. D-D, 4/WD),
Ser. 20-30 (D-D)
Ser. 20-30 (exc. D-D, 4/WD),
Ser. 20-30 (D D)
Ser. 30 w/11,000 lb. axle .........
Ser. 30w/11,000lb. axle .........
Ser. 30 (exc. 11,000 lb. axle) .....
Ser. 30 (exc. 11,000 lb. axle) .....
.................
................
right rear,
.........................
3856854
1
55
left,front..........................
3883393
1
45
3883394
3873455
3873456
3856851
3856852
5465936
5465937
3873453
3873454
5468679
5468678
1
2
2
1
1
1
1
2
2
1
1
.45
.45
.45
1.10
1.10
.50
.50
.95
.95
PIVOT, left, front and rear,
left, front
3856855
1
10
PIVOT, right, front and rear,
right, front
PIVOT, left, front and rear
PIVOT, right, front and rear...........
3856856
5462256
5462257
1
1
1
10
23
.23
right front
LEVER
LEVER
CORVETTE .................... LEVER
CORVETTE .................... LEVER
Ser. 30 w/11,000 lb. axle ......... LEVER
Ser. 30w/11,000 lb. axle ......... LEVER
CORVETTE ...................
LEVER
CORVETTE ..................... LEVER
PASS., CORVETTE (exc.
Sp. /Per.),
64-65 Ser. 10,
64
PASS., CORVETTE (exc. IMPALA,
65
Sp. /Per.),
Ser. 20,
65
Ser. 30 (exc. D-D),
65
66-68 ALL,
66
CORVETTE (exc. Disc. Brakes) ..
65-66 Ser. 30 (D-D)
63-64 PASS., CORVETTE (exc. Sp./Per.),
64-65 Ser. 10,
64
PASS., CORVETTE (exc. IMPALA,
65
Sp. /Per.),
Ser. 20,
65
Ser. 30 (exc. D-D),
65
66-68 ALL,
66
CORVETTE (exc. Disc. Brake) ...
65-66 Ser. 30 (D-D)
64-68 G-10
64-68 G-10
Not required in this group. See
group 4.651
...................
...................
...........................
............................
...................
........................
..........................
.........................
ASSY., left, rear ..............
ASSY., right, rear .............
right, front
left, rear
right, rear
ASSY.,
ASSY.,
ASSY.,
ASSY.,
ASSY.,
ASSY.,
left, parking brake ......
right, parking brake.....
left, rear
right, rear
right parking brake .....
left parking brake.......
..............
.............
.........................
........................
............
CUP.
...............................
5460577
14
5.105 LINK—PAWL, Brake Shoe Automatic Adjusting Lever
63-64 PASS., CORVETTE (exc. Sp./Per.)
64-68 Ser. 10, G-20,
64-67 Ser. 20 (exc. D-D, 4/WD),
CORVETTE (exc. Disc. Brake),
65
65-68 PASS
65-66 Ser. 20-30 (exc. D-D, 4/WD),
68
Ser. 10 (exc. D-D),
68
Ser. 20 (exc. 4 /WD),
68
Ser. 30
Sp./Per.)
63-64 CORVETTE w/Sp./Per..........
64-68 Ser. 10, G-20,
64
CORVETTE (exc. Disc Brake),
65
65-68 PASS
65-67 Ser. 20-30 (exc. D-D, 4/WD),
Ser. 10 (exc. D-D),
68
68
68
Ser. 30
..........................
.........................
.....................
..........................
........................
left, front and rear
left, front (5 15/ 6 O.L.) ...............
5461156
1
64
5461157
5459679
5459680
1
1
1
64
55
55
right, front (515/b O, L.) ..............
left, rear ..........................
right, rear .........................
©-1967
5.103-5.105
838
64-67 Ser. 20 (D-D, 4/WD) .............
65-67 Ser. 30 (D-D) (exc. 11000 lb.
axle),
68
Ser. 20 (4/WD) ..................
64-67 Ser. 20 (D-D, 4/WD) .............
65-67 Ser. 30 (D-D) (Exc. 11000 lb. axle),
68
Ser. 20 (4/WD) ..................
G-10 ..........................
64-68 G-10 .........................
65-67 Ser. 30 (exc. 11, 000 lb. axle) .... ,
65-67 Ser. 30 (exc. 11,000 lb. axle) .....
67
Ser. 30 (D-D) w/11,000 lb. axle ...
67
Ser. 30 (D-D) w/11,000 lb. axle ...
67
Ser. 30 w/11,000 lb. axle.........
5.107
left, front .........................
3843209
1
.65
right, fron
front.............. .........
right, front and rear....... ..........
left, front and rear .................
left, rear ..........................
right, rear .........................
left, front .........................
right, front ........................
rear ..............................
PAWL, left ................ .
PAWL, right .........................
3843210
5462527
5462526
3856857
3856858
3873517
3873518
3873459
5459682
5459683
1
1
1
1
.65
.55
.55
.90
.90
.25
.25
.10
.23
.23
5461984
5461141
A.R.
2
.15
.26
front,
front and rear......................
5461145
A.R.
.36
front and rear return (1 3/64 O.L.—blue)..
5462097
A.R.
.15
front and rear override (2 2 / 2 O.L.green)............
"""""""'
front and rear retur
...............
front and rear override (24 1/2 coils-3
freelength) ......................
5462096
5462742
A.R.
1
.55
.30
5462264
2
.36
front, override......................
3883392
2
.15
1
1
1
1
4
1
SPRING, Brake Shoe Automatic Adjusting Lever
63-68 PASS. (exc. Disc Brake, metallic
linings, TAXI POLICE),
63-65 CORVETTE (exc. metallic linings,
Disc Brake),
64-68 G-10-20,
64
Ser. 10 (4/WD),
64
Ser. 20 (D-D),
65-68 Ser. 20-30 ......................
64
Ser. 20 (4/WD) ..................
64
Ser. 10exc.
4/WD)
(
) ....... .......
65
Ser. 10 w/leaf type springs ........
metallic linings),
64
Ser. 10-20,
65-68 PASS. (exc. metallic linings, Disc
Brake, TAXI, H.D. chassis),
65-66 CORVETTE (exc. metallic linings),
65-66 Ser. 10-20 (4/WD) ...............
65-66 Ser. 20-30 (exc. 4/WD) ...........
64
Ser. 20 (exc. D-D),
67-68 Ser. 10 thru 30 ..................
67-68 Ser. 20-30 (D-D 4/WD),
67-68 Ser. 10 .........................
67-68 G-20 .............
...
linings,
65-68 PASS, w/metallic brakes,
65-68 TAXI, POLICE (exc. metallic
brakes) ......................
linings,
65-68 TAXI, POLICE (exc. metallic
brakes)
...
.
63-64 CORVETTE w / S p./Per.,,,,,,,,,,
64-68 G-10 (exc. metallic linings) .......
66-68 Ser. 20-30 (exc. D-D, 4/WD),
68
Ser. 20-30 (D-D) .................
front and rear,
front,
rear ................... ...........
rear, lever retaine
" """'
front and rear override (18 coils_2%
free length),
rear,
C-1967
839
5,105-5.107
5.110 SCREW—SCREW ASSY.—CAMSHAFT — WASHER—SPRING, Broke Shoe Adiustin
51-62 PASS., '/ TON,
53-62 CORVETTE,
53-63 3/4 TON (exc. D-D w/7.50-17 tires,
duals, 14" brake) ..............
53-55 COMM. (1st Ser.),
55-59 Ser. 3 (2nd Ser.),
60-62 Ser. 30,
63
Ser. 10 (4/WD),
63
Ser. 20-30 (exc. 4/WD),
64
Ser. 30 (D-D) ...................
63
Ser. 20 .........................
51-55 UTILITY (1st Ser.) ..............
51-55 UTILITY (1st Ser.) ..............
53-55 UTILITY (1st Ser.) ..............
53-59 1 TON,
55
D-D w/7.50-17, 7.00-18 tires
(2nd Ser.),
56-59 D-D w/14" brake or duals,
60-64 Ser. 30 .........................
64-66 Ser. 10,
64-68 Ser. 20 (exc. D-D, 4/WD),
65-68 PASS.,
67-68 G-20 ............................
65-68 Ser. 20-30 (exc. D-D, 4/WD),
67-68 Ser. 10,
67-68 PASS. (exc. 6 cyl. sta. wagon,
65
Sp. /Per.),
64-66 Ser. 10,
64-68 Ser. 20 (exc. D-D, 4/WD),
65-68 PASS.,
67-68 G-20 ...........................
65-68 Ser. 20-30 (exc. D-D, 4/WD),
67-68 Ser. 10,
67-68 PASS. (exc. 6 cyl. sta. wagon,
discbrakes) ..................
65
64-67 Ser. 20 (D-D, 4/WD) ..............
64-67 Ser. 20 (D-D, 4/WD) .............
64-68 G-10 ...........................
64-68 G-10 ...........................
65-66 Ser. 30 (exc. D-D),
65-66 Ser. 30 (D-D) (exc. SGL. SPD.
axle) ........................
67
Ser. 30 (D-D) w/11,000 lb. axle ...
65-67 Ser. 30 w/11,000 lb. axle.........
Ser. 30 (D-D) w/11,000 lb. axle..,
67
65-67 Ser. 30 exc. 11,000 lb. axle,
68
Ser. 30 (exc. D-D),
68
Ser. 30 (D-D) (exc. P Trac.) ......
67
Ser. 30 (D-D) w/11,000 lb. axle ...
65-67 Ser. 30 (exc. 11,000 lb. axle),
68
Ser. 30 (exc. D-D),
68
Ser. 30 (D-D) (exc. P/Trac.) ......
67
Ser. 30 (D-D) w/11,000 lb. axle ...
Ser. 30 w/11,000 lb. axle.........
67
67
Ser. 30 w/11,000 lb. axle.........
62
62
63
PASS., CORVETTE,
Ser. 10 .........................
Ser. 10 (exc. 4/WD) ..............
front and rear,
front,
rear(Bendix 29491) .................
rear,left..........................
rear,right......................
front,
496351 A.R.
3694517
2
3694518
2
64
40
40
rear(2'/4 O.L.) .....................
1416753
2
80
3820157
9
.35
3820158
5462847
5462848
5467203
5467202
5459669
5459670
2
1
1
.35
.59
.59
1
1
.77
.77
3856845
1
1.10
3856846
1
1.10
3856847
1
.90
3856848
1
.90
3873451
2
.40
3873452
2
.40
left, rear ..........................
right, front,
right, rear .........................
left, front and rear..................
right, front and rear................
left, front and rear ..................
right, front and rear.................
left, rear ..........................
right, rear .........................
w/nut, left rear adjusting pivot,
left, front .........................
w/nut, right rear adjusting pivot,
right, front ........................
left rear adjusting,
left, front .........................
right rear adjusting,
right, front ........................
left, rear ('/ a -12 x 1 5/) (stamped L)
(R.H.thd.) ......................
right, rear (°/ 6 -12 x 1 5/8 ) (stamped R)
(L.H. thd.) ......................
SCREW ASSY., w/nut, front and rear
(13/33
I.D.) .........................
5.110
3820200 A.R.
1.18
1)-1967
840
64-67 Ser. 20 (exc. D-D, 4/WD) .........
65-67 Ser. 20-30 (exc. D-D, 4/WD),
67-68 PASS. (exc. disc brakes),
67-68 G-20
Sp. /Per.),
64-67 Ser. 20 (exc. D-D, 4/WD) .........
65-67 Ser. 20-30 (exc. D-D, 4/WD),
67-68 PASS. (exc. disc brakes),
67-68 G-20
63-64 CORVETTE w/Sp./Per.......... .
64-67 Ser. 10 (exc. 4/WD)
65-68 Ser. 10,
67-68 G-20
64-67 Ser. 10 (exc. 4/WD)
65-68 Ser. 10,
67-68 G-20 ..........................
64-65 G-10
67
G-10
64-65 G-10 ...........................
67
G-10
65-67 CORVETTE w/disc brakes .......
.............
...........................
.............
...........................
..............
...........................
..............
...........................
...........................
...........................
65-68 G-10 ..........................
65-68 G-10 ..........................
60-63 Ser. 10 (4/WD)
67
Ser. 30 w/11,000 lb. axle .........
63-64 PASS., CO RVETTE(exc. Sp./Per.),
64
Ser. 10 . .......................
64 Ser. 20 (exc. D-D, 4/WD) .........
64-68 G-10-20,
65-68 PASS., Ser. 10,
65-68 Ser. 20 (exc. D-D,4/WD)..........
65-68 Ser. 30 (exc. D-D) ...............
65
CORVETTE (exc. Disc Brake)...
64-67 Ser. 20 (D-D, 4/WD),
65-67 Ser. 30 (D-D) (exc. 11,000 lb. axle)
68
Ser. 20 (4/WD) ..................
65-67 Ser. 30 (exc. 11,000 lb. axle),
68
Ser. 30 (exc. D-D),
68
Ser. 30 (D-D) (exc. P. /Trac.) .....
67
Ser. 30 w/11,000 lb. axle .........
67
Ser. 30 w/11,000 lb. axle .........
..................
5.111
SO
SCREW ASSY., w/nut, left front and rear,
left, rear,
left, front
.........................
3820155
2
95
right, front
SCREW ASSY., w/nut, left front and rear
SCREW ASSY., w/nut, right front and rr.
SCREW ASSY., w/nut, front left,
3820156
5462743
5462744
2
2
2
.95
2.78
2.78
.....................
3842987
1
.90
....................
3842988
1
.90
5462961
2
.95
5462962
2
.95
5467297
3882741
3 882 74 2
2408333
3873458
2
1
1
2
2
.95
.95
.95
.55
.20
WASHER, front and rear adj. screw
( Y4 I.D. x '/ O.D.) .................. 3820201
WASHER, rear adjusting screw socket... 5456106
4
2
.05
.20
WASHER, frt. and rear adj. screw,
front adjusting screw,
rear ..............................
5462496
2
.15
WASHER, front and rear adj. screw,
front adjusting screw
5459672
2
.16
WASHER, rear adjusting screw socket,
front .............................. 3856849
SPRING, adjusting screw friction rear... 3887372
2
.05
(5.026)
SCREW ASSY., w/nut, right frt. and rr.,
right, rear,
........................
rear left w/nut
SCREW ASSY., w/nut, front right,
rearright w/nut
SCREW ASSY., w/nut, left front and rear,
left, rear ..........................
SCREW ASSY., w/nut, right front and rr.,
right, rear
SCREW ASSY., w/nut, park brake
adjusting pivot
SCREW ASSY., w/nut and pivot, left ...
SCREW ASSY., w/nut and pivot, right ..
CAMSHAFT, front (Bendix 49348) ......
CAMSHAFT, rear
.........................
.....................
.....................
...............
C K ET— NUT—SPRING, Broke Shoo Adjusting Screw
51-62 PASS. (1st design),
51-52 '/ TON,
53-62 CORVETTE ....................
53-55 COMM. (1st Ser.),
55-59 '/, '/a TON (2nd Ser.) (exc. 14',
brake, P/Trac.),
60
Ser. 10-20 (exc. D-D),
61-62 Ser. 10-20-30 (1st design),
63
Ser. 20 .........................
54-55 COMM. (1st Ser.),
55-59 Ser. 3 (2nd Ser.),
60-62 Ser. 10 (1st design),
60-62 Ser. 20-30 (exc. 4/WD),
63
Ser. 20-30 (exc. 4/WD, D-D),
64
Ser. 30 (exc. D-D) ...............
53-59 1 TON,
60-67 Ser. 30 (w/11000 lb. axle),
68
Ser. 30 .........................
67
Ser. 30 (D-D) w/11,000 lb. axle
©-1967
front and rear,
rear,
front ( 15/ 2 I.D. x 1 O. L.).............
3768027* A.R.
.24
3697400 A.R.
.30
rear,
front,
rear ( 14 I.D. x 1''/31
O.L.
) ............
5.110-5.111
841
57-63
63
63-64
62
62-63
63
63
64
64
64-66
65
65-68
64-67
65-66
67-68
68
64
65-68
Ser. 20 (4/WD),
PASS. (409) (RPO Z11) ..........
CORVETTE w/Sp./Per...........
....................
.....................
509209
2
5462015 A.R.
.42
1.27
..............................
3828808 A.R.
.25
......................
..............................
..............................
3842985
5462140
5459693•
1
2
2
.25
.52
.43
..............................
3844097
2
.25
5462946
3882740
2
2
.47
.40
front ( 1 3/32 O.L.)
front and rear
Ser. 10 (2nd design),
PASS., CORVETTE (exc. Sp./Per.),
.............
..................
Ser. 10 (exc. 4/WD)
Ser. 10 (4/WD)
front and rear,
rear,
PASS., CORVETTE (exc. Sp./Per.),
Ser. 10,
CORVETTE (exc. Disc Brake),
PASS .
.........................
Ser. 30 (exc. D-D),
G-2 0,
Ser. 20-30 (exc. 4/WD)...........
Ser. 10
Ser. 10, G-20 (exc. leaf type
springs)
Ser. 10 w/leaf type springs.......
Ser. 20 (D-D, 4/WD)
Ser. 20-30 (D-D, 4/WD),
Ser. 20 (4/WD)
G-10
Ser. 20-30 (exc. 4/WD, D-D),
Ser. 10 (exc D-D, 4/WD),
Ser. 20-30 (D-D)
G-10.
Ser. 10,
G-20 ...........................
G-10 .. .......................
65-66
65-66
64-66
64-67
68
64-66
67
67
68
68
67-68
67-68
67
65-68
51-52
53-62
53-55
55-62
.........................
......................
.............
..................
...........................
.................
PASS., Y TON,
PASS., CORVETTE (1st design) ..
front and rear,
front
front,
front and rear
rear
rear
rear,
front
front and rear,
front,
rear ..............................
front ..............................
63
63
54-55
55-59
60-62
60-63
64
NUT, pivot, front and rear,
COMM. (1st Ser.),
'.%2 , '/, TON (2nd Ser.) (1st design)
(exc. 14" brake)
pivot rear,
Ser. 20,
Ser. 30 (exc. D-D)
rear shoe adjusting,
COMM. (1st Ser.),
Ser. 3 (2nd Ser.),
Ser. 10 (1st design),
Ser. 20-30,
Ser. 30 (exc. D-D)
pivot front
(NOTE: Use 3820200 SCREW ASSY. for 2nd design.
1 TON,
D-D, w/14" brake or duals,
Ser. 30,
Ser. 30 (exc. 11,000 lb. axle),
Ser. 30 (D-D) w/11,000 lb. axle,
Ser. 30 (exc. D-D),
Ser. 30 (D-D) (exc. P/Trac.) ...... NUT, pivot, rear,
UTILITY (1st Ser.)
pivot, front
Ser. 10 (4/WD)
NUT, front camshaft ( 3/- 24) (Bendix
49349) ............................
53-59
56-59
65
67
67
68
68
53-55
60-63
...............
...............
...............
.........................
..............
..................
........................
63
PASS.,
63-64 CORVETTE (exc. Sp./Per.),
64-68 PASS.,
65
CORVETTE (exc. Disc Brake) .... NUT, right, front and rear
64-67 Ser. 20 (exc. D-D, 4/WD) .........
right, rear,
65-68 Ser. 20-30 (exc. D-D, 4/WD),
67-68 G-20,
68
Ser. 20-30 (D-D)
right, front ........................
63-68 PASS . ......................... NUT, left, front and rear,
63-64 CORVETTE (exc. Sp/H/Per.),
65
CORVETTE (exc. Disc Brake)..
front and rear,
64-67 Ser. 20 (exc. D-D, 4/WD) .........
left, rear,
64-67 Ser. 30 (exc. D-D),
65-68 Ser. 20 (exc. D-D, 4/WD),
67-68 G-20,
68
Ser. 20-30 (D-D) .................
left, front .........................
................
5.111
842
3694702 *tA.R..35
3698655
2
.40
2408334
2
.15
3820166
3817346
A.R.
A.R.
.35
35
c_ 1967
64-68 Ser. 10, G-20 (exc. leaf type
springs) ......................
64-68 Ser. 10, G-20 (exc. leaf type
springs) ......................
65-67 Ser. 30 (exc. 11,000 lb. axle),
68
Ser. 30 (exc. D-D),
68
Ser. 30 (D-D) (exc. P./Trac,) .....
67
Ser. 30 w/11,000 lb. axle .........
65
64-68 Ser. 20 (D-D, 4/WD) .............
Ser. 30 (D-D) ...................
64
65-67 Ser. 30 (D-D) (exc. 11,000 lb. axle)
64-68 Ser. 20 (D-D, 4/WD) .............
65-67 Ser. 30 (D-D) (exc. 11000 lb. axle),
NUT, left, front and rear ..............
3842983
1
.35
NUT, right, front and rear .............
3842984
1
.35
3856844
5459322
509235
5459691•
5459692•
1
1
1
1
1
.40
.67
.70
.71
.71
3844095
1
.35
3844096
1
.35
NUT, pivot, left front and rear .........
5462947
1
1.20
.35
NUT, right rear screw pivot,
right, front ........................
NUT, pivot, rear .....................
NUT, rear ...... ....................
NUT, pivot, left rear ..................
NUT, pivot, right rear ................
NUT, left, front and rear.
left and right, front,
left, front .........................
NUT, right, front and rear,
right, front ........................
64-65
G-10,
67
G-10 ...........................
64-65
G-10,
67
G-10 ...........................
NUT, pivot, right front and rear ........
65 -68
65-68
65-67
51-55
5462948
1
G-10 ...........................
NUT, pivot, left front .................
3882743
1
.40
1
2
4
.40
.48
.10
G-10 ........................... NUT, pivot, right front ................
3882744
CORVETTE .................... NUT, parking brake ................... 5465948
UTILITY (1st Ser.) .............. SPRING, lock, rear ................... 3694524
*NOTE: Not used on 1955-57 D-D w/7.50-17 or 7.00-18 tires, or 1956-58 D-D w/duals.
5.117
COVER, Brake Adjusting Hole
38 -63 ALL, CORVETTE ..............
38 -50 UTILITY .......................
x 9 / 6 —rubber) ..................
1455658
A.R.
rear flange plate ...................
.10
477464
2
.20
right (8 O.L.) ......................
left (9 3/4O.L.) ......................
475478
596973
1
1
.89
.65
left(775/6O.L.).....................
3693603
1
.56
right(715/b O.L.) ...................
3693604
1
.56
left(8','i O.L.) ......................
3697449
1
.95
4-SPD.) ......................
53-55 1 TON (1st Ser.),
58 -59 Ser. 3G w/4/WD .................
53-55 1 TON (1st Ser.),
right(8', O.L.) ......................
3697450
1
.95
left (10'/4O.L.).....................
3697391
1
1.10
58 -59
right (10'a O.L.) ....................
left (stamped 307653) ...............
right (stamped 307654) ..............
3697392
1
1.10
2367014
1
1.60
2367013
1
1.60
5.149
(11/4
LEVER—LEVER ASSY., Pa rking Brak e Sh oe
38-39
40-42
46-50
38-52
51-58
H, J (exc. HE, JE),
PASS., '/ TON ..................
1 TON, JE, KE, AM, BM .........
1/2
PASS., CORVETTE,
TON (exc.
^z TON w/P/Trac.),
59
CORVETTE,
60-62 Ser. 20 w/3-SPD. (exc. 4/WD, D-D),
63
Ser. 20 (exc. 3-SPD, H.D.-4-SPD.,
4/WD, D-D) ...................
51-58 PASS., CORVETTE, z TON (exc,
'/2 TON w/P/Trac.),
59
CORVETTE,
60-62 Ser. 20 w/3-SPD. (exc. 4/WD, D-D),
63
Ser. 20 (exc. 3-SPD. H.D,-4-SPD.,
4/WD, D-D) ...................
53-59 '/4 TON w/sgl. whl. (exc. Prop. Brk.),
60-63 Ser. 20 (4/WD),
60-62 Ser. 20 (D-D) w/3-SPD.,
63
Ser. 20 D-D (exc. 3-SPD. H.D.,
4-SPD.) ......................
53-59 '/a TON w/sgl. wheel (exc. Prop.
Brake),
60-62 Ser. 20 (4/WD),
60-62 Ser. 20 (D-D) w/3-SPD.,
63
Ser. 20 D-D (exc. 3-SPD. H,D.,
Ser. 3G w/4/WD .................
58-59 'Z TON w/P/Trac ................
58-59 '2 TON w/P/Trac ................
C-1967
5.111-5.149
843
57-68 PASS.,
58-67 Ser. 10,
58-65 CORVETTE,
64-67 Ser. 20 (exc. D-D, 4/WD),
67
G-20 ...........................
PASS., 'zz TON (exc.
59
TON
w /P /Trac.),
12
60-63 PASS., CORVETTE, TON,
65
CORVETTE (exc. Disc Brake) ....
64-66 G-10 ...........................
64-67 G-10 ...........................
65
CORVETTE,
64-67 Ser. 10, G-20,
63-68 PASS.,
65-67 Ser. 20 (exc. D-D, 4/WD).........
64
Ser. 20 (4/WD),
64
Ser. 20 (D-D) (exc. 3-SPD. H.D.,
4-SPD.)
64
Ser. 20 (4/WD),
64
Ser. 20 (D-D) (exc. 3-SPD. H.D.,
4-SPD.)
65
Ser. 10 w % leaf type springs .......
65
Ser. 10 ;-/leaf type springs .......
65-66 Ser. 20 w/leaf type springs.......
67
Ser. 30 (exc, 11000 lb. axle) ......
67
Ser. 30 (exc. 11000 lb, axle) ......
......................
......................
left
...............................
3886371
1
.70
right
left ..............................
right .............................
3855038
5462942
5464761
1
1
1
.70
.60
.60
..............................
3886372
1
.70
LEVER ASSY., left
...................
3843613
1
.95
LEVER
LEVER
LEVER
LEVER
LEVER
LEVER
LEVER
right..................
left
right
left
right
left
right
...................
..................
...................
..................
...................
..................
3843614
5462674
5462675
5464007
5464008
3898057
3898058
1
1
1
1
1
1
1
.95
1.30
1.30
1.05
1.03
.60
.60
475481
597239
597240
3680957
3680958
1
1
1
1
1
1.26
1.50
1.50
1.50
1.50
3697394
2
1.00
..............................
right
ASSY.,
ASSY.,
ASSY.,
ASSY.,
ASSY.,
ASSY.,
ASSY.,
5.150 EXTE NSION-STRUT, Parking Brake Shoe Lever
38-39 PASS., COMM. (exc. HE, JE),
40-42 PASS., KC, KD, AK, AL, BK, BL,
46-50 PASS., 'Z TON
left (7 14 6O.L.)
38-52 1 TON, JE, KE, AM, BM .........
left (7"4 O,L.)
38-52 1 TON, JE, KE, AM, BM .........
right (7"%1,, O.L.)
46-52 3/4 TON
left (7 4, O.L.)
46-52 3/4 TON
right (7"/, O.L.)
53-55 '/4 , 1 TON (1st Ser.),
3
55-57 /, TON w/sgl. wheel (2nd Ser.) (exc.
Prop. Brake),
60-62 Ser. 20 (D-D) w/3-SPD. (exc. H.D.),
60-66 Ser. 20 (4/WD),
63-65 Ser. 20 D-D (exc. 3-SPD. H.D.,
(73/4 O.L.) .........................
4-SPD.) .....................
51-62 PASS., CORVETTE, ';4 TON (exc.
TON w/P. Trac.),
63
Ser. 10 (4/WD) (1st Ser.),
65-68 PASS. (exc. H.D. chassis, taxi),
65
CORVETTE (exc. Disc Brake).... STRUT .............................
58-59 '2 TON w/P/Trac ................ STRUT (stamped 303397)..............
60-67 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D, 4/WD, leaf type springs)... STRUT, left .........................
60-67 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
D-D, 4/WD, leaf type springs). STRUT, right ........................
63
63
Ser. 10 (4/WD) (2nd Ser.) ......... STRUT .............................
64
Ser. 10 (4/WD) (2nd Ser.),
65-67 Ser. 10, G-20 (exc. leaf
ty e springs)
p
................. STRUT .............................
65
Ser. 10 w/leaf type springs ....... STRUT .............................
65-66 Ser. 20 w!leaf type springs ....... STRUT, left .........................
65-66 Ser. 20 w'leaf type springs ....... STRUT, left .........................
64-67 TAXI, POLICE ................. STRUT .............................
64-65 G-10 w/3.73, 4.11 ratio, 2900 lb.
axle.........................
STRUT,left.........................
64-65 G-10 w/3.73, 4.11 ratio, 2900 lb.
axle.........................
STRUT,right........................
64-66 G-10 ........................... STRUT
65-67 CORVETTE .................... STRUT, left .........................
..................
.........................
.........................
.....................
....................
...................
....................
...................
5.149-5.150
844
3825500 A.R.
2346854
2
.50
.87
3760209
1
.55
3760210
1
.55
3814219
2
.50
3842980
545697S
5453802
5453803
3849768
2
2
1
1
2
.50
.91
1.80
1.80
.47
3853851
1
.55
3853852
5462944
5465940
1
2
1
.55
.21
.20
x_1967
65-67
6
7
67
68
CORVETTE ,
,, , ,
Ser. 30 (exc. 11000 lb. axle),
Ser. 20 (D-D, 4/WD) .............
Ser. 30 w /11,00 lb. axle
(exc. D-D) ....................
5.151
STRUT, left .
5465941
1
.20
STRUT, lever ...... .
3898059
2
1.00
STRUT, trans........................
3920778
1
.55
476104
597241
3680956
2
2
2
.10
.15
.200
SPRING, Parking Brake Shoe Lever
38-39
40-42
46-50
38-52
PASS., COMM. (exc. HE, JE),
PASS., '2 TON ..................
1 TON, JE, KE, AM, BM .........
',â TON .........................
51-52 PASS., '/ TON,
53-55 COMM. w/sgl. wheel (1st Ser.)
extension ( 15/ 2 I.D. x l/ O.L.).......
extension ( 19/ 2 I.D. x 1'/ 6 O.L,) , • , • , ,
extension ( 17 /32 I. D. x 1"/z O.L.) .....
(exc. Prop. Brake),
53-66 CORVETTE (exc. Disc Brakes),
53-68 PASS.,
55-59 Ser. 3 w/sgl. wheel (2nd Ser.) (exc.
Prop. Brake, '/ TON w /P/Trac.),
58-59 Ser. 3G w/4/WD,
60-63 Ser. 10,
60-62 Ser. 20 w/3-SPD. (exc. H.D., 4/WD),
60-62
65-66
67
67
68
Ser. 20 (4/WD),
Ser. 10-20,
Ser. 10, G-20,
Ser. 30 (exc. 11,000 lb. axle),
Ser.
30 w/11,000 lb. axle (exc.
D D
- ) ........................
58-59 z TON w/P/Trac.,
65
Ser. 10 w/leaf type springs ......
64
G-10 ...........................
65-67 G-10,,,,,,,,,,,
5.158
BOLT—WASH
(27/
max. I. D. x 1'/4 O.L.) ...........
(oblong-19/3 O. L.) ..................
—
2
.28
.06
502327
2
5459885
2
5464520
2
.14
475492
2
65
15
( %-24 x / 6 ) (w/o eccentric))
3693605
2
.11
(1Y O.L.) (w/o eccentric)
) '' '
3697393
2
11
WASHER, spring steel ('?; z hole) .......
1300540
2
.12
WASHER, spring .....................
5454797
2
.12
(2132 max. I.D. x s '/ 4 free length)....,,
ER
1312281
RETAINER—RING, Parking Brake Lever Anchor
38-39
40-42
46-50
51-58
H, J (exc. HE, JE),
PASS., ' TON........ ,
PASS., CORVETTE, 1/ TON (exc.
1958 ';z TON w/P/Trac.),
59-60 CORVETTE ...................
'/a TON (1st Ser.),
55-57 '/, TON w/sgl. wheel (2nd Ser.)
(exc. Prop. Brake),
60-63 Ser. 20 w/3-SPD., PG (exc.
4/WD, H.D.),
60-63 Ser. 20 (4/WD) .................
PASS., t '2 TON,
53-55 COMM. w/sgl. wheel (1st Ser.)
(exc. Prop. Brake),
55-59 Ser. 3 w/sgl. wheel (2nd Ser.) (exc.
Prop. Brake, 12 TON w/P/Trac.),
60
Ser. 20 (D-D, 4 /WD),
60-63 Ser. 20 (exc. D-D, 4/WD, 3-SPD.
H.D., 4-SPD.),
61-62 Ser. 20 (D-D) w/3-SPD. (exc. H.D.),
(/8_24 x 15/, 6 ) (w/eccentric)......... ,
61-63 Ser. 20 (4/WD),
63
Ser. 20 (exc. 3-SPD. H.D., 4-SPD.,
4 /WD, D-D) ...................
58-59 Ser. 3G w/4WD,
58-59 PASS., 1 2 TON (exc. lZ TON
w/P'Trac. ),
60-62 Ser. 10,
60-62 Ser. 20 (4/WD, D-D),
60-62 Ser. 20 (exc. D-D, 3-SPD. H.D.,
4-SPD.) ......................
C-1967
84 5
5.150-5.158
65-67 CORVETTE ....................
58-59 "2 TON w/P/Trac ................
67
68
CORVETTE ....................
CORVETTE ....................
57-58
58-59
59
60-62
PASS. w/metallic linings,
'/i TON (exc. P/Trac.),
PASS.,
PASS., CORVETTE, ' TON ......
5.380
58
58
58
59-64
63
60-62
64
63-64
63-68
63-68
65-66
65-66
65-66
65-68
65-68
65-68
58
58
59-62
59-63
64
63-64
63-67
65-66
65-66
65-66
A
WASHER, pivot pin ...................
RETAINER, parking brake shoe lever
anchorpin ........................
RETAINER, seal.....................
RETAINER, underbody tunnel rear
console park brk. lever seal .........
RING, retainer
( /,
R
shaft dia.)..........
5465996
2
.20
3693520
3897383
2
1
.10
.75
3918666
1
.45
274560
1
(8.934)
SY
BRACKET-BRACKET S .-SUPPORT- REINFORCEMENT-MEMBERMEMBER ASSY.-CUSHION ASSY.-SHIM, Rear Axle C ontrol Arm
PASS . .........................
PASS . .........................
PASS . .........................
PASS. (exc. STA. WAG.),
STA. WAG ......................
Ser. 10-20 (exc. D-D) ............
STA. WAG ......................
CORVETTE ....................
Ser. 10 (D-D),
Ser. 10-20 (exc. D-D, 4/WD) ......
PASS . .........................
PASS . .........................
PASS . .........................
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
PASS . .........................
PASS . .........................
PASS . .........................
PASS ..........................
PASS. .........................
PASS . .........................
left, upper.........................
right, upper........................
lower,front........................
3747871
3747872
3755830
1
1
2
.70
.70
.70
upper .............................
rear axle control arm frame ..........
upper .............................
rear suspension control arm bumper ...
3774856
3797969
3841256
3832776
1
2
1
2
.89
1.94
.89
1.86
2
1
1
1
1
1
1
1
1
1
2.00
1.79
1.79
1.55
4R
4R
3.16
3.16
2.64
1
2.82
1
2.64
1
1
1
1
4.20
3.06
3.06
1.84
1
4.95
1
1
1
4.95
10.7;
10.75
1
1 . R.S
2
1
1.85
3.10
frame .............................
19992
left, lower inner (Budd frame) ........ 3858735
right, lower inner (Budd frame) ....... 3858736
right, lower outer (Budd frame) ....... 3858738
left, rr, susp, control arm bumper ..... 6)61)1)045
right, rr. susp. control arm bumper .... 6)666046
rear suspension torque bumper ....... 6564277
BRACKET ASSY., left, lover .......... 3755833
BRACKET ASSY., right, lower ......... 3755834
BRACKET ASSY., left, lover frame .....
3754695
BRACKET ASSY., right lower frame (2
pivot bolt holes) ................... 3832256*
BRACKET ASSY., left lower frame
(2 pivot bolt holes) ................ 3832255*
*NOTE: When using on STA. WAG. models which have brackets with (2) pivot bolt holes, use
lower hole. On STA. WAG. models which have brackets with (1) hole, and all other
models with (1) or (2) holes, use upper hole.
CORVETTE .................... BRACKET ASSY., rear wheel spindle
support strut ....................... 38 17827
PASS. w/Parallel edges.......... BRACKET ASSY., left, lower frame.....
3858795
PASS. w/Parallel edges..........
BRACKET ASSY., right, lower frame....
3858796
PASS . ........................
BRACKET ASSY.. upper control arm .... 3856392
5.158-5.380
• 6.6
1
3.10
1
1 075
1
1 0.75
1
..6.5n
1
3.50
1
1
1
4.65
1.36
1.36
1
.84
1
.84
6 -1967
846
58
PASS. w/1 piece channel frame
(exc. CONV.) .................
58
PASS. w/l piece channel frame
(exc. CONV.) .................
59
PASS. (w/2 pc. welded channel
frame) ......................
59
PASS. (w/1 pc. tube frame) .......
59
PASS. (w/l pc. welded channel
frame) .......................
63-68 CORVETTE ....................
63-68 CORVETTE ....................
58
PASS . .........................
63-64 CONV ..........................
64
64
64
65-66
66-68
60-64
60-64
60-64
65-66
63-68
PASS. w/1 piece tube rail frame
(327, 409) (exc. CONY.)........
PASS. w/l piece welded channel
rail frame (327, 409) (exc.
CONY.) ......................
PASS. w/2 piece welded channel
rail frame (327, 409) ...........
PASS . .........................
PASS. w/H.D. Susp, (8 cyl,) ......
PASS . .........................
PASS. w/1 piece tube rail frame
(exc. CONY.) .......... . ......
PASS. (2 pc. tunnel floor w/welded
channel rails) (exc. TAXI)......
PASS. w/1 pc. welded channel rail
frame (exc. CONY.)............
PASS. w/Parallel edges..........
CORVETTE ....................
65-66 PASS. w/angled edges ...........
67-68 PASS. w/angled edges ...........
PASS. w/parallel edges ..........
63-68 CORVETTE ....................
63-68 CORVETTE ....................
63-68 CORVETTE ................. ..
63-68 CORVETTE ....................
63-68 CORVETTE ....................
5.381
58
59-64
59-64
63-68
63-68
63-68
63-68
58
58
63-68
58
SHAFT-BUSHING
A
3748927
1
1.22
SUPPORT, right upper bracket .........
3748928
1
1.22
SUPPORT, upper bracket..............
SUPPORT, upper bracket ..............
3758096
3758092
1
1
4.38
3.87
SUPPORT, upper bracket..............
SUPPORT, left, control arm to spindle ..
SUPPORT, right, control arm to spindle .
REINFORCEMENT, upper bracket ......
REINFORCEMENT, upper control arm
crossmember.......................
crossmember (stamped #17) ..........
3758094
382064.3
3820644
3751601
1
1
1
2
4.05
14.0.5
14.05
.07
3839871
1
1.21
3845817
1
1.08
3845818
1
1.08
crossmember.......................
crossmember (stamped "S") .........
REINFORCEMENT, frame bracket ......
REINFORCEMENT, lowe
lower.............
REINFORCEMENT, upper control arm.
3845819
1
3863923
1
388,9725
.3S 725
2
3900576 A.R.
1.08
.18
30
.20
MEMBER, upper cross ..... , ..........
3841081
1
6.30
MEMBER, upper cross. . . . . . . . . . ......
3841083
1
6.30
MEMBER, upper cross .................
MEMBER, upper cross ................
MEMBER ASSY., rear suspension
mountingcross .....................
MEMBER ASSY., upper cross , ...... , , ,
MEMBER ASSY., upper cros
cross..........
MEMBER ASSY., upper ......... .......
CUSHION ASSY., rear suspension rear
mounting cross member ..............
SHIM, rear susp. torq. control arm (4 3/4 x
/4 w/2 holes-"/,, dia.) ..............
% w/2 holes-" 2 dia.) ..............
'/ 2 w/2 holes-"/32 dia,) .............
/ w/2 holes-"/32 dia.) ..............
3841082
3881660
1
1
6.30
8.65
3876576
3881662
3901650
.3901650
1901660
1
1
1
1
27.90
9.25
9.9
9.25
9743971
2
3.16
3846595
A.R.
.40
3846596
A.R.
35
3846597
A,R.
.30
3846598 A.R.
.30
SS Y , - P LATE- RETAINER, Rear Axle Control Arm
PASS . .........................
PASS . .........................
PASS . ..... ............
CORVETTE (exc. Sp./Susp.) .....
CORVETTE (exc. Sp./Susp.) .....
CORVETTE w/Sp./Susp..........
CORVETTE w/Sp./Susp..........
PASS . .........................
PASS ..........................
CORVETTE ...................
PASS. (exc. Air/S) ..............
C-1967
SUPPORT, left upper bracket ..........
lower... ..................
......
left,lower.........................
right, lower...,,.,,.,,,,,..,,.,,,,,
left, rear wheel spindle support strut..
right, rear wheel spindle support strut .
left, rear wheel spindle support strut..
right, rear wheel spindle support strut.
BUSHING ASSY., upper, front ..........
BUSHING ASSY., upper, rear,
rear suspension torque control arm. . .
BUSHING ASSY., lower control arm .....
847
3741808
3758363
3758364
3820929
3520930
352925.5
3829266
3748462
2
1
1
1
1
1
1
4
3.69
3.69
3.69
570
5.70
6.75
6.75
.65
3743857
3738526
2
4
.95
.96
5.380-5.381
59-61 PASS. (exc. STA. WAG., SDL.,
PDL., TAXI, H.D. spring),
62-63 PASS. (exc. STA. WAG., TAXI) ...
P DL.),
62-63 PASS. (exc. STA. WAG., TAXI,
H.D. spring) ..................
59-61 TAXI,
59-61 PASS. w/H.D. spring (exc.
STA. WAG.) ..................
59-63 STA. WAG., SDL., PDL.,
STA. WAG.) ..................
62-63 TAXI ..........................
PDL., TAXI, H.D. spring) ......
59-64 TAXI,
STA. WAG.) ..................
59-64 STA. WAG......................
59-64 PASS . .........................
65-68 PASS . .........................
60-68 Ser. 10-20 (exc. D-D, 4/WD),
63-68 Ser. 10 (D-D) ...................
64
STA. WAG., SDL., PDL.,
64
PASS. w/ H.D. spring (exc.
STA. WAG.) ..................
64
TAXI ..........................
65-68 PASS . .........................
65
PASS.,
66
PASS. w/H.D. Suspension,
66
STA. WAG......................
66-67 PASS. (exc. STA. WAG., H.D.
Susp.) .......................
63-68 CORVETTE ....................
63-68 CORVETTE ....................
BUSHING ASSY., lower front, L.H.,
lower front, R.H.,
lower front, L.H.,
lower front, R.H. and L.H. (3 notches
on outer flange) ..................
3758675 A.R.
1.00
BUSHING ASSY., lower rear, R.H. and L.H.,
lower rear, L.H.,
lower rear, R.H. and L,H.,
upper (3 notches on outer flange).
lowerfront ........................
3864586 A.R.
BUSHING ASSY. (2'./, O.D.) .............1762012
2
1_n;
1.10
BUSHING ASSY., lower front, R.H. and L.H., 3
notches on outer flange ............. 3764034 A.R.
BUSHING ASSY., lower rear ............1856381 A.R.
1.10
1.45
BUSHING ASSY., upper rear ........... 3878372 A.R.
1.45
BUSHING ASSY., upper rear ........... 3888738
PLATE, rear suspension torque control
RETAINER, rear suspension torque
armbushing ....................... 3819806
4
1.45
2
.38
5.382 ARM ASSY., Rear Axle Control
58
58
58
59-64
59-64
60-62
63-68
63-65
63-65
PASS . .........................
upper (w/bushings)................. 3738516
1
14.10
PASS. w/Air/S .................
lower(w/bushings)................. 3755785
2
11.45
PASS. (exc. Air/S) ..............
lower ............................. 3755832
2
8.80
PASS . .........................
upper (w/bushings) (2 yellow stripes) . 3824235
6.00
1
PASS. (exc. Air/S) ..............
lower, left and right ................ 3774123
2
7.10
Ser. 10-20 (exc. 4/WD),
Ser. 10-20 (exc. 4/WD)...........
complete .......................... 3881314
2
33.90
CORVETTE (exc. Disc Brake)....
left, torque control (less bolts)....... 3881537* 1
34.90
CORVETTE (exc. Disc Brake) ....
right, torque control (less bolts)...... 3881538* 1
34.90
*NOTE: See BOLT 3818741 in group 5.002.
65-68 CORVETTE w/Disc Brake .......
right, torque control (less bolts) ...... 3874770
1
44.90
65-68 CORVETTE w/Disc Brake .......
left, torque control (less bolts) ....... 3874769t I
14.90
tNOTE: See BOLT 3864037 in group 5.002.
65
PASS.,
66
PASS. w/4 arm Suspension (exc.
STA. WAG., H.D. Susp.),
66
PASS. w/H.D. Suspension,
66
STA. WAG ......................
upper ............................. 3856386 A.R.
5.80
66
PASS. w/3 arm Suspension .......
upper ............................. 3878398
1
5.80
65-68 PASS . .........................
lower ............................ 5856379A 7
S.1 0
67-68 PASS. w/H.D. Susp ..............
upper ............................. 3900541
1
S.R0
ANOTE: When using for Special Performance Suspension. drill 3 holes for stabilizer bar attachment.
5.383 B O LT—NUT—WASHER—SPACER—CLAMP, Rear Axle Control A rm
58
PASS . .........................
58
PASS . .........................
59-64 PASS . .........................
58
PASS . .........................
upper, front ( 1/- 20 x 3Ye) ............
lower, front,
upper and lower frt.
upper, rear ( %-18 x 3) ............
5.381
848
3750056
2
3758077 A.R.
3739833
1
.40
.45
.45
©- 1967
60-62 Ser. 10-20,
64-68 Ser. 10 (exc. 4/WD),
64-68 Ser. 20 (exc. 4/WD, D-D) .........
60-62 Ser. 10-20 ......................
right and left (" "U" bolt-7! throat)
bushing attaching ( 3/4 -10 x 4) (260
3762198
A.R.
..........................
428792
2
left ("U" bolt) ....................
3824709
1
1.80
right ("U" bolt) ....................
rr. wheel spindle support arm and
brake assy. ('/ a -20 x 4°4a).........
upper and lower (S-a-18 x 4) .........
upper and lower ( siq -18 x 4) ..........
diff. carrier mounting bracket (/ 6 -20 x
3824710
1
1.80
steel)
63
63
Ser. 20 (exc. 4/WD, D-D) .........
63
Ser. 10 (exc. 4/ WD),
63
Ser. 20 (exc. 4/WD, D-D).........
63-66 CORVETTE ....................
65-67 PASS ...........................
67-68 PASS . .........................
68
CORVETTE w/T.H . .............
3921658
( 4-11 x 4 1/2 ) .......................
NUT, upper, rear (/,-18) ..............
NUT, upper bracket attach. (,-20) ....
NUT ( -24) .........................
PASS . .........................
3866766
NUT,(9/6-18)........................
PASS . .........................
PASS . .........................
9422304
2
WASHER, upper arm bracket ( 1 3 3 ,) ......
WASHER, (upper arm cross member
reinforcement attaching) ( 15/,,) .......
SPACER, upper bracket ..............
_
1
SPACER, upper bracket (43 x 3 4 x
3754153
6
2270887
3739834
3722853
'/,thk.) ...........................
63-64 PASS. (2nd design) ..............
65-66
65-66
66-68
65-68
PASS ........................ ..
PASS ..........................
PASS. w/H.D. Suspension ........
PASS . .........................
5.387
SPACER, upper bracket (45 0 x 3'/a x
thk. .
1/
) .........................
32
SPACER, upper (.062-.076 thick).......
SPACER, upper (.036-.046 thick)........
SPACER, lower ......................
CLAMP, rr. axle lower control arm sorine
41-50 2/SPD . ............. .
41 -48 PASS . .........................
41-42 UTILITY (exc. H.D.) ............
46-50 1'/2 TON .......................
(8.917)
.05
3818180
3747866
A.R.(0.002)
A.R.
.14
3758116
A.R.
.14
3847954 A.R.
3841443 A.R.
3841444 A.R.
3888727
2
3888774
2
.15
.14
.05
.45
.2S
(75.800-75.760 O.L.) (2 half moon
indentations on rear face to left of
centerline-6 half moon indentations
on front face seats welded
to housing) ......................
605443
1
151.65
....................................
605336
1
40.90
(73.416-73.396 O.L.) (2 half moon
indentations rear face to right of
centerline-2 half moon indentations front face-spring seats
welded to top of housing)
47 -50 'Z TON ........................
50 -52 3/,, 1 TON (exc. 1 TON D-D) ......
51-54
PASS .
51-53
',= TON
.........................
............. . ..........
51-55 1'.2 TON (1st Ser.) (exc. 2-SPD.) ..
51-53 2 TON (exc. 2-SPD.) ............
51 -53 2-SPD . ........................
.........
605339
1
118.75
3847141
1
52.50
....................................
3694914
1
91.35
....................................
3703104
1
51.80
....................................
3696164
1
52.45
....................................
3705371
1
125.85
....................................
3702797
1
148.80
....................................
3702798
1
156.20
....................................
3700016
1
91.35
................................
3707512
1
....................................
3707514
1
55.60
151.65
....................................
3730168
1
52.50
....................................
3751890t
1
63.15
....................................
3774766
1
98.90
...............................
53-55 '/4 , 1 TON (1st Ser.) (exc. 1 TON
D-D)
A.R.(n.676)
HOUSING-BOLT-NUT ASSY.- VENTILATOR-CONNECTOR-WASHER,
Rear Axle
39-40 VF, WD w/2-SPD ................
........................
54
12 TON ........................
54 -55 2-SPD. (1st Ser.) ................
55 -56 PASS . .........................
55-59 ';i TON (2nd Ser.) (exc. P/Trac.),
60
1. 95
4 (5.506)
1
.10
3 (6.172)
2
Ser. 10 (exc. D-D, 4/WD) ........
PASS . .........................
PASS . .........................
Ser. 10 thru 30,
PASS., CORVETTE .............
58
PASS . .........................
59-63 PASS. (1st design) ..............
(8.900)
3846867
2
.30
868
A.R.(7 5?q^
3904269 A.R.(7.529)
413;6) ...........................
67
58
59-62
60-64
63-68
66
58
60-64
1.80
Ser. 10 (4/WD) ..................
tNOTE: When installing on 1955-56 jobs it will be necessary to use rear spring
anchor Plate 3737372 (group 7.518).
55-59 ',a TON (2nd Ser.) (exc. D-D),
60
Ser. 20 (4/WD) ..................
55-59 D-D, 1 TON (2nd Ser.),
60-62
57
Ser. 20 (D-D) ...................
PASS . .........................
..............................
....................................
57
CORVETTE (exc. P/Trac.) ......
3752663
3739443
1
1
108.90
52.50
....................................
3739688
1
52.50
4-1967
5.383 - 5.387
849
57-58 CORVETTE w/P/Trac. (exc. P.G.),
S9
CORVETTE w/H.D. Brake/Susp ...
PASS . .........................
CORVETTE (exc. P/Trac.) ......
....................................
....................................
....................................
3755503
3750932
3752100
1
1
1
52.70
59.60
52.10
58-59
TON w/P/Trac ................
59-62 CORVETTE (exc. P/Trac.) ......
(w/o flange plates) .................
....................................
2381001
3773007
1
1
85.00
53.15
59-62 CORVETTE w /P/Trac ...........
60-62 Ser. 10 (exc. 4/WD) ..............
....................................
....................................
3773006
3768179
1
1
53.15
64.50
60-62 Ser. 20 (exc. 4/WD, D-D) ........
.................................... 3768188
60-62 Ser. 30 .........................
....................................
3821017®
®NOTE: When using on C30 models, it will be necessary to remove left hand tee connector
bracket. On P30, remove right hand tee connector bracket.
1
105.00
1
105.75
59-64
61-62
63
61 -62
PASS . .........................
Ser. 10 (4/WD),
Ser. 10 (4/WD) (1st Ser.) .........
Ser. 20 (4/WD) (1st design) .......
62
Ser. 20 (4/WD) (2nd design),
58
58
63
Ser. 20 (4/WD) (1st Ser.) .........
63-64 Ser. 10 (exc. 4/WD) ..............
....................................
3777029
1
63.50
....................................
....................................
3786278
3786259
1
1
57.50
96.50
....................................
....................................
3820445
1
3847754tt 1
96.50
83.45
NOTE: Flange plates 3859655 left and 3859656 right must be used for 1963 models only.
63-66 Ser. 10 (4/WD) (2nd Ser.)
(1st design) ..................
....................................
3866164
1
88.75
63-66 Ser. 20 (4/WD) (2nd Ser.) .........
....................................
3824202
1
105.75
63-66 Ser. 20 (D-D) ...................
....................................
....................................
3794400
3819769
1
1
105.75
105.75
....................................
3909797
1
98.90
....................................
....................................
....................................
....................................
....................................
....................................
....................................
....................................
....................................
....................................
....................................
3909798
3857228
3867734
3857229
3866163
3866165
3917879
24480760
24570750
3886376
3917860
1
1
1
1
1
1
128.15
88.75
83.00
88.75
88.75
83.45
78.70
109.00
182.00
....................................
3916069
1
78.35
....................................
3896847
1
105.75
....................................
....................................
3902453
3902454
1
1
137.15
137.15
....................................
3898043
1
98.90
....................................
....................................
....................................
....................................
....................................
....................................
....................................
3898044
3902445
3917864
3917869
3917868
3917867
3917863
1
1
1
1
1
1
1
98.90
105.75
88.75
88.75
88.75
105.75
83.00
BOLT, hsg. to carrier ('/e-24 x 1 3/32 ) ....
BOLT, hsg. to carrier ( 5/8 -11 x 1'/4 ) .....
348402
370457
A.R.
6
BOLT, hsg. to carrier (/8 -24 x 1'/) .....
BOLT, hsg. to carrier ( r/ 6 -20 x l') ....
3652348
3707480
4
6
.20
(6.172)
BOLT, hsg. to carrier ( 3/-24 x 1 254 4 ) ...
3786363
10
.25
BOLT, hsg, to carrier short, hag. cover
( 4-24 x 1'/a) ......................
3735727
A.R.
.10
63 -67 Ser. 20 (exc. 4/WD, D-D) .........
63-66 Ser. 30 (exc. dual wheels),
67
Ser. 30 (exc. dual wheels shock
abs., D-D),
67
Ser. 30 (D-D) ...................
63-66 Ser. 30 w/dual wheels,
Ser. 30 w/dual wheels (exc. shock
67
abs., D-D),
67
Ser. 30 (D-D) (exc. dual wheels) ...
64 -66 G-10 w '3.36 ratio ...............
64
G-10 (exc. 3.36 ratio) ............
65-66 G-10 (exc. 336 ratio) .............
65-66 Ser. 10 (exc. 4/WD) .............
65
65-68
65-66
65 -66
66
PASS. w/10 bolt ring gear
.......
PASS. w/12 bolt ring gear .......
Ser. 10 w/leaf type spring ........
PASS. w ' 10 bolt ring gear ........
Ser. 10 (4/WD) (2nd design) .......
66
67-68 PASS. w/10 bolt ring gear ........
67-68 Ser. 20 (4/WD) ..................
67
Ser. 30 w/157 W.B. (11,000 lb.
axle),
68
Ser. 30 w/11,000 lb. axle (exc. D-D)
67
Ser. 30 (D-D) w/1 1,000 lb. axle ...
67-68 Ser. 30w/shock abs. (exc. D-D,
dual wheels),
68
Ser. 20-30 (D-D) (exc. dual wheels)
67-68 Ser. 30 (dual wheels w/shock
abs.) (exc. D-D),
68
Ser. 20-30 (D-D) w/dual wheels ...
67
67-68
67 -68
67-68
67-68
67-68
Ser. 20 (D-D) ...................
Ser. 10 (exc. 4/WD) ..............
G-10 w3.36 ratio ...............
G-10 (exc. 3.36 ratio) ............
G-20 ...........................
Ser. 10 (4/WD) ..................
38-54
53-55
55-56
38-40
40-42
46-56
40-55
55-62
63-64
57-59
60-62
63
PASS., TON,
CORVETTE,
'^Z TON ........................
UTILITY ......................
COMM.,
TON ........................
UTILITY (1st Ser.) ..............
PASS., CORVETTE,
PASS . .........................
'2 TON (exc. P/Trac.),
Ser. 10 ........................
Ser. 10 (4/WD) (1st Ser.) ........
1
1
1
1
1
83.00
.20
.30
c_1967
5.387
85 G
eneral Motors Corporation
0
57-59 '-i TON (exc. P/Trac.)
60-62 Ser. 10,
63
63
Ser. 10 (4/WD) (1st Ser.) .........
CORVETTE ....................
group 9.008 ...................
58-61 PASS., CORVETTE .............
BOLT, hsg. to carrier long (4-24 x 1 7,^y)
BOLT, diff. carrier frt. mtg. ( 7/ 6 -14x24)
( w/sealing washer) .................
ALL, CORVETTE,
ALL,
CORVETTE w/3-SPD.,
CORVETTE,
PASS.,
Ser. 10-20, G-10-20 (1st design) ... VENTILATOR ... ....................
§NOTE: For 2nd design see Connector 3889981.
65
Ser. 10, G-10 ................... VENTILATOR .......................
g rou p6.008 .................. VENTILATOR .......................
66
Ser. 10, G-10 (2nd design),
67
Ser. 10, G-10-20 ................. CONNECTOR, axle ventilator..........
*NOTE: For 1st design see Ventilator 3820840.
67
Ser. 10, G-10-20 ................. CONNECTOR, rear axle ventilator ......
55-57 PASS.,
56-57 CORVETTE .................... WASHER, carrier bolt ("/ I.D. x''z O.D.)
2
A
4
2
BOLT, ( 7/ 6 -14 x 5'.42) #2 body ........... 6257777
NUT ASSY., carrier attaching (3/8-24)
38-62
63-64
63
64-68
65-68
66-68
5.390 STR
3735728
6256398
.10
.25
.35
3750570
10
.35
18208463
1
.24
3766380
1
.40
2140049
.30
3889981*
1
.1.5
3889578
1
.15
1456254
10 (4.317)
P—PLATE—BRACKET, Rear Axle Rebound
53 -62 CORVETTE ....................
(2914 dev. length) ..................
53-62 CORVETTE .................... PLATE, strap ( 3/, x 14) ...............
53-62 CORVETTE .................... BRACKET, strap, (2 used on each side
3774449
3706115
2
8
1.89
.05
member) ..........................
3706077
4
.19
(3 I.D. x 3'2 O.D.) ..................
377706
2
.15
(1% I.D. x 3/32 O.D.) ................
3694711
2
.18
(3'/b I.D. x 5'/2 O.D.) ................
594314
2
.50
5.392 DEFLECTOR, Axle Housing Oil
38-42 COMM.,
46-59 Y TON (exc. P/Trac.),
60-62 Ser. 10,
63
38-54
53-55
38-53
54-55
67
67
Ser. 10 (4/WD) (1st Ser.) .........
PASS.,
CORVETTE ....................
UTILITY,
1!/2 TON (1st Ser.) (exc. 2-SPD.),
Ser. 30 (D-D) w/11,000 lb. axle,
Ser. 30 w/157 W.B. (11,000 lb.
axle) .........................
46-55 COMM. (1st Ser.) (exc. '/2 TON),
55-59 Ser. 3 (2nd Ser.) (exc. '2 TON),
60
4/WD,
60-62 Ser. 20-30 (exc. 4/WD),
63-66 Ser. 20-30 (exc. 4/WD),
66
Ser. 20 (4/WD),
67
Ser. 20-30 (exc. 11,000 lb. axle).
54-55 l'/ TON w/2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.) ................
2
(2 732
4 2 I D. x 425
O.D.) ..............
3819772
2
.35
(35/a I.D. x 5'Yb O.D. ) ...............
3703701
2
.50
3711561
2
.42
3820983
2
.85
3754036
1 (7.526)
mounting hole) .....................
33
3754033
1 (7.526)
1 (7.526)
2
3.2.5
5.394 RETAINER—BRACKET ASSY.. BRACKET—PLAT E, Rear Axle Bumper
55-57 PASS . .........................
63
Ser. 10,
64-67 Ser. 10 (D-D),
64-68 Ser. 10-20 (exc. D-D, 4/WD),
67
CORVETTE ....................
58
PASS. w/2 piece channel rail
frame (exc. CONY.) ...........
58
CONV . ........................
(43/,
0.L.). . . . . . .
..................
............................
BRACKET ASSY., right (1°3 2 dia.
mountin hole)) ......
BRACKET ASSY., left (/64 dia.
58
CONV . ........................
BRACKET ASSY., right ( /64 dia.
67
Ser. 10-20 (4/WD) ...............
mounting hole) .....................
3754034
BRACKET ASSY., rear axle bumper .....
3889249
X1967
5.387-5.394
851
68
60-61
62
62
64-66
64-66
67-68
67-68
60-61
...............
Ser. 10-20 (4/WD)
Ser. 10 w/115 W.B. (exc. 4/WD),
Ser. 20 (exc. D-D)
G-10
G-10
G-10-20
G-10-20
Ser. 10-20 w/127 W.B. (exc. 4/WD)
...............
...........................
...........................
........................
........................
5.395
55-57
55-57
58-63
63-64
60-61
62
60-61
63
64-68
64-68
67-68
63-64
65-68
64-66
65-66
65-68
67
67-68
63-68
67-68
63-68
67-68
.............
391.r,2R2
2
1.9S
BRACKET (1 13/16 x 546)
BRACKET,left......................
BRACKET,right.....................
BRACKET, left
BRACKET,right.....................
PLATE, anchor (1 3/4 x 6%)
...............
......................
............
3762197
3852635
3852636
3884295
3984296
3761934
2
1
1
1
1
2
.85
.85
.85
(2% x 2/16 ) ........................
axle differential case (1 high) ......
(/-l6 attaching bolt)
(no attaching bolt)..................
3719960
3738663
3764438
3832094
2
1
2
2
.48
.29
.67
.56
....................................
3762195
3765209
2
2
.75
.81
....................................
384.3849
3850161
38642R0
3852039
9770780
3869845
3908008
535757
2
2
2
2
1
2
1
1
.75
1.06
.R2
(7.535)
.39
.55
.30
.68
3829537
1
.50
3829538
1
.50
....................................
3795433
1
3.35
....................................
(late axle identified by horizontal ribs)
3859336
3667226
1
1
3.35
3.75
....................................
3680956
1
335
front (Dana 23384) ..................
3849237
1
3.00
....................................
diff. carrier........................
3844177
3871374
1
1
2.05
21.00
....................................
(Dana 24531X) ....................
....................................
....................................
3832419
2494735
3852998
2457054•
1
1
1
1
1.84
3.35
1.84
3.05
....................................
3887261
1
1.84
BRACKET ASSY., bumper
9C
95
.60
BUMPER-STOP, Rear Axle
PASS . .........................
PASS .
PASS. (1st design)
PASS. (2nd design),,,,,,,,,,,,,,
Ser. 10 w/102, 115W.B. (exc. 4/WD),
Ser. 10-20 w/102, 115, 127 W.B.)
(exc. 4/WD) ..................
Ser. 10-20 w/127 W.B. (exc. 4/WD)
Ser. 10,
Ser. 10-20 (4/WD) ...............
CORVETTE
CORVETTE
G-10 ...........................
PASS . .........................
PASS . .........................
PASS. (1st design)
PASS. (2nd design)
Ser. 10 (SGL. UNIT) (exc. 4/WD) ..
Ser. 10 (SGL. UNIT) (exc. 4/WD) ..
.........................
.............
....................
....................
..............
..............
..............
....................................
rear suspension torque control arm....
rear suspension torque control arm....
....................................
pinion nose........................
....................................
.............
.............
STOP, left .........................
STOP, right .........................
pinion nose (2i" O.L.)
pinion nose (3''-" O.L.)
5.398 COVER, Axle Housing with Filler Plug
38-42 COMM.,
46-59 ' TON (exc. P/Trac.),
60-62 Ser. 10,
63
Ser. 10(4 WD) 1,1st Ser.) .........
40-55 UTILITY (1st Ser.) (exc. 2-SPD.,
H.D.) ........................
42-55 2-SPD. (1st Ser.)
46-55 COMM. (1st Ser.) (exc. 12 TON),
55-59 Ser. 3 (2nd Ser.) (exc. 2 TON),
60-66 Ser. 20-30,
67-68 Ser. 20-30 (exc. 11,000 lb. axle) ...
58-59 '2 TON w/P/Trac.,
60-64 4,'WD,
65
Ser. 20 (4/WD),
66
4/WD ..........................
63
63
Ser. 10 (4/WD) (2nd Ser.),
64-68 Ser. 10,
64-68 G-10-20 (exc. 3.36 ratio) .........
63-68 CORVETTE ....................
64-66 G-10 w'3.36 ratio (1st design),
65
PASS. w/10 bolt ring gear (1st
design) ......................
65-66 Ser. 20 w 'leaf type spring ........
65-67 PASS. w'12 bolt ring gear ........
65-68 Ser. 10 ,, ,leaf type spring ........
65-68 G-10 w/3.36 ratio (2nd design),
65-68 PASS. w/10 bolt ring gear (2nd
design) (exc. STA. WAG.) ......
................
5.394-5.398 852
x_1967
5.399
38-42
GASKET, Axle Housing Cover (Cork)
COMM.,
46-58 2 TON (1st design),
58-59 'Z TON (2nd design) (exc. P/Trac.),
1
60-62 Ser. 10,
63
Ser. 10 (4/WD) (1st Ser.) .........
38-55 UTILITY (1st Ser.) (exc. 2-SPD.
H.D.) .......................
38-54 PASS.,
53-55 CORVETTE ...................
39-55 2-SPD. (1st Ser.) ................
46-55 COMM. (1st Ser.) (exc. % TON),
55-59 Ser. 3 (2nd Ser.) (exc. ') TON),
(fibre comp.). . . . . .. . . . . ...........
3752660
1
1.25
(11% I.D. x 13'4 O.D.) ...............
370448
1
.60
I. D. x 10% O.D.)
(13 I.D. x 14% O.D.) ................
593017
3651369
1
1
.43
.70
(l042 I.D. x 12%4
............
3665606
1
.50
front (Dana 32640) ..................
3849238
1
.60
3844178
1
.92
3832420
1
3852999
1
.58
.58
2494737.
1
.73
3931151
1
3931152
1
(1-20 sq. hd.-1'% dia. flange)........
(1( hex. head) .....................
344829
3704497
1
1
.20
.75
w/instr. tag (1'/ 4 O.L.) ..............
3866433
1
.33
.......................... ..........
SCREW, drain/-20
i ) • • • .........
'2 ^ x "ê
SCREW, drain ('4-20 x ", 6 ) ............
3931171
1
(95%
60-66 Ser. 20-30,
67-68 Ser. 20-30 (exc. 11,000 lb. axle) , .
58-59 z TON w/P/Trac.,
60-68 4/WD,
65
Ser. 20 (4/WD),
66-68 Ser. 10-20 w/leaf type springs ....
63
63
Ser. 10 (4/WD) (2nd Set.),
64-68
64-68
67
64-68
65-67
Ser. 10,
G-10 (exc. 3.36 ratio),
65-67
65-67
68
68
O.D.
G-20 ...........................
G-10 w/3.36 ratio,
......................
PASS. (w/10 bolt ring gear) .......
....
PASS. (w/12 bolt ring gear).......
Set. 20 w/leaf type spring ........
PASS. (w /10 bolt ring gear) .......
PASS. (w/12 bolt ring gear) .......
...............................
....................................
....................................
5.400 PL UG—SCREW, Axle Filler and Drain
38-62
56-64
63-64
63
63
64-67
53-55
65-67
65-67
65-67
65-67
68
68
57-67
68
ALL (exc. 1958 '4 TON w/P/Trac. ),
CORVETTE,
PASS.,
Ser. 10 thru 30 (exc. 4/WD),
Ser. 10 (4 WD) (1st Ser.),
Ser, 20 thru 30 ..................
CORVETTE ....................
PASS. w/P/Trac.,
Ser. 10 w/P/Trac. (exc. 4/WD),
G-10 w/P/Trac.,
CORVETTE w/P/Trac. ..........
Ser. 10-20, G-10-20 w/P/Trac.,
PASS. w/P/Trac. .......
PASS., CORVETTE, 'i TON ......
ALL ...........................
(
3779764
1
(1.453)
3923420
1
(1.453)
3714775
513975
1
1
.05
(1.456)
5.401 GASKET—PLUG , Axle Plug and Screw
38-63 ALL (exc. ',2 TON w/P/Trac.),
53-66 CORVETTE,
64-67
Ser. 20-30,
68
Ser. 30 w /11000 lb. axle .........
57-61 PASS., CORVETTE, '4 TON ......
68
ALL ...........................
AL ...............
5.403
filler plug, leather (1 I.D. x 1 32 O.D,).
drain screw, nylon ( / I.D. x % O.D.)
GASKET, drain screw ( 2 I.D. x 75' s O.D.)
PLUG, rear axle drain (magnetic) ('/_20)
9
1
'
3921989
A.R.(1.4-6)
3866776
A.R.(1.453)
SEAT—PLATE, Rear Spring (Se e group 7.518)
40-47 PASS.,
48-54 PASS., '2 TON ..................
41-42 UTILITY,
46-55 1 2 TON .......................
—1967
(cast 3652 183) .....................
""""""'
3652182
2
3.88
PLATE, "U" bolt anchor (cast 3686985)
3686985
2
3.70
5.399-5.403
853
46-53 2 TON,
67
Ser. 30 w/11,000 lb. rear axle
(exc. 133 W.B.),
68
Ser. 30 (157 W.B. w/11,000 lb.
axle) (exc. D-D) ...............
54-55 l/ TON w/2-SPD. (1st Ser.) ......
54-55 2 TON (1st Ser.) ................
5.404
3763717
2
4.10
3707396
2
3.85
597267
4
.15
597268
2
.25
3760512
3772145
2
1
6.05
5.45
3770952
1
7.60
3821233
3854906
1
1
7.25
6.25
3856396
1
5.25
3901733*
be used.
1
6.85
3930289
3819205
1
2
6.15
tie rod,
radius rod .........................
3764839
2
1.00
tie rod,
rr. wheel spindle supt. strut .........
tie rod ............................
3775762
3829519
1
2
1.50
1.50
tie rod ............................
3866557
1
1.34
tie rod............................
CAM, rear wheel spindle supt.
strut adj. ........ ..................
CAM ASSY., rear wheel spindle supt.
strut adj. (w /bolt) ..................
CAP, rear wheel spindle supt. strut
bushing...........................
1374270
1
2.50
3790331
2
3820253
2
3791519
4
SEAL—BOLT, Rear Spring Seat
38-54 PASS.,
47-54 '44 TON ........................
38-54 PASS . .........................
47-54 l2 TON .......................
5.415
(use w/round type housing) ..........
(rubber 1 I.D. x 1 7/8 O.D. x 3/ 6 thick)...
BOLT, rear spring seat to axle hag.
1
( '4-18 x 4 4 6 ) ......................
ROD ASSY.—STRUT ASSY., Rear Axle
59-62
59-64
60-62
60-62
63-64
63-68
67-67
65
65
66-68
65
66-68
CORVETTE ....................
radius ............................
PASS . .........................
tie, w/bushings ....................
Ser. 20 (exc. 4/WD, D-D) .........
tie, w/bushings ....................
Ser. 20 (exc. 4,AVD, D-D, 396).....
tie ...............................
Ser. 10 (exc. 4/WD) ..............
tie w/bushings.....................
PASS. (exc. CAPRICE),
CAPRICE w/H.D. Susp.),
PASS . .........................
tie ...............................
CAPRICE (exc. H.D. Susp.),
PASS. (exc. STA. WAG., H.D. Susp.)
tie ...............................
' NOTE: When using 3901733 in place of 3879404, stud number 3901736 must also
68
Ser. 10 w, H.D. 4-SPD. (396),
68
Ser. 20 (396) ....................
tie ...............................
63-68 CORVETTE .................... STRUT ASSY., rear wheel spindle support
5.417
BUSHING ASSY.—CAM—CAM ASSY.—CAP, Rear Axle
PASS . .........................
CORVETTE ....................
Ser. 20 (exc. 4/WD, D-D) .........
CORVETTE ....................
Ser. 20 (exc. 4/WD, D-D) .........
CAPRICE (exc. H.D. Susp.),
PASS. (exc. STA. WAG., H.D.
Susp.),
68
PASS. w/H.D. Susp ..............
65
CAPRICE w/H.D. Susp.),
66-67 PASS. w/H.D. Susp ..............
63-67 CORVETTE ....................
59-64
60-62
60-66
60-62
63-68
63-68
65
66
63-68 CORVETTE ....................
63-68 CORVETTE ....................
5.418
(6.172)
.67
(6.170)
BRACKET — SUPPORT ASSY.—STUD—WASHER—CAP—BOLT, Rear Axle Tie Rod
59-64
59-64
59-64
59-62
PASS. w/1 pc. tube frame ........
PASS. w/1 pc. channel frame .....
PASS. w/2 pc. channel frame , , . , .
CORVETTE ....................
59-62
60-62
61-62
63-64
63-68
65-68
65-68
CORVETTE ....................
Ser. 10-20 (exc. D-D, 4/WD),
Ser. 10 (D-D) ...................
Ser. 20 (exc. 4/WD, D-D) .........
Ser. 10 (exc. 4/WD) ..............
PASS . .........................
frame (3 °/ b and 1' /2 holes) ...........
frame (2 °/ 6 and 1 42 holes) ...........
frame (2 °'1 b holes) ........ . . . . ... . . .
radius rod to frame (1 oblong 19 32 x
29/32
hole) .......................
radius rod to axle ..................
3755572
3755747
3755749
1
1
1
1.22
1.22
1.22
3760508
3760603
2
2
2.92
.23
frame (5 holes).....................
3761872
1
1.75
frame .............................
frame .............................
frame ( Budd ).......................
3819993
3854910
3858718
1
1
1
.90
1.30
1.22
5.403-5.418
854
_1967
65
66
66
67-68
67-68
63-68
PASS.,
PASS., (exc. SPT. MDLS.),
CONY. w/Parallel edges.........
PASS. (exc. SPT. MDLS.),
CONY. w/Parallel edges .........
CORVETTE
.............................
frame ............................
................... SUPPORT
ASSY., rear suspension
outer mounting (5 .s O.D.) ............
63-64 PASS. ........................
STUD, attaching (/ -18 x 3 "/ )
65-68 Ser. 10 (exc. 4/WD) ............. STUD, tie rod to axle w/bushing (563
frame
1
6
6
3858804
1
1.26
3895856
1
1.30
3775513
2
4.75
3758081
A.R.
.45
3854909
1
1.00
3856401
1
.50
/b4
O.L.)
.............................
65-66 PASS. (H.D. Suspension w/Sp.
H/Per.) (396, 427) (exc.
STA. WAG.),
65-66 STA. WAG . .......................STUD, tie rod to axle ( 94
4 -18 x 4) ......
65
CAPRICE (exc. Sp./H/Per. 396,
H.D. Suspension,
66
PASS. (exc. Sp./H/Per., 396, 427,
STUD, tie rod atl ax e (% b -18 x
H.D. Suspension, STA. WAG.).
438) .........
67-68 PASS .
STUD, tie rod at axle (°/ 6 -18 x 4'/6) ....
Ser. 20 (396)
68
STUD, tie rod to axle (81 O.L.) ........
58-62 CORVETTE
WASHER, attaching, radius rod stop ....
59-68 PASS .
WASHER, attaching (°/ b ), tie rod ........
65
CAPRICE (exc. Sp./H/Per. 396),
66-67 PASS. (exc. Sp./H/Per. 396, 427,
H.D. Suspension, STA. WAG.) ... WASHER, at axle (°1b)
65-67 PASS .
BOLT, tie rod to frame (i; M1 -18 x 3) ....
5.420
................
....................
....................
.........................
..........
.........................
................
.82
.50
8.75
.25
.10
3879406
3917528
1
1
.10
.25
left (28/4 O.L.) (stmp'd 3652341) .....
right (29 3/4 O.L.) (stmp'd 3652342) ....
3652341
3652342
1
1
15.95
15.95
left (10 splines-34'4 O.L.-splined
hub end) (stamped 3685191) ........
3685191
1
21.70
3685192
1
21.70
3661899
3657314
2
1
22.95
16.50
3702227
1
24.10
3702228
1
24.10
3702230
1
24.10
3762917
1
21.65
3762918
1
21.65
3683161
1
20.65
3683162
1
20.65
3687767
1
18.50
3687768
1
18.50
3694755
1
18.50
3694756
1
18.50
3832641#
1
21.65
SHAFT, Axle
............
............
...................
40-46 COMM. (exc. DR, DS)
40-46 COMM. (exc. DR, DS)
40-42 UTILITY (Reg. Prod.)
(exc. 2-SPD
46-55 1'Z TON (1st Ser.) (exc. 2-SPD ) ...
40-42 UTILITY (Reg. Prod.) (exc,
2-SPD.) ......................
46-55 1'62 TON (1st Ser.) (exc. 2-SPD.)...
41-46 2-SPD. w/Mech. Shift ............
41-48
42-46
46-51
4:'-46
46-51
42-46
46-51
46-59
60-61
62-67
62
PASS . ............. .
M, Ow/H.D. (exc. 2-SPD.) ...... , ,
2 TON .........................
M,O w/H.D. (exc. 2-SPD.)........
2 TON (exc. 2-SPD.) ......... . ...
M,O w/H.D . ....................
2-SPD. w/Vac. Shift .............
'/„ 1 TON,
Ser. 20 (D-D, 4/WD),
Ser. 20 (D-D),
Ser. 20 (4/WD) (1st design) .......
46-59
60-61
62
62-67
'/a , 1 TON
Ser. 20 (D-D, 4/WD),
Ser. 20 (4/WD) (1st design),
Ser. 20 (D-D) ...................
47-50 '/ TON ........................
47-50 '/ TON,, , , , , , , , , ,,,, , , ,,
49-50 PASS . .........................
49-50 PASS . .........................
51-54
53-55
51-54
53-55
51-59
60-61
3879405
1
3901736
1
3930292
1
3764526
2
3758854 A.R.
PASS . .........................
CORVETTE . .
PASS.
...................
CORVETTE .......
',2 TON (exc. P/Trac.) ... , , , , ....
Ser. 10 .........................
IC-1967
right (10 splines_40% O.L.-splined
hub end) (stamped 3685192) ........
w/out tapered stud holes (38'/ O.L.)
(stmp'd 3661899) .................
right (305/,O.L.) (stmp'd 3657314) .....
left (16 splines-36'4 O.L.) (stamped
3702227)(splined hub end)........
right (16 splines-41 O.L.) (stamped
3702228) (splines hub end) ........
right (16 splines-40 O.L,) (stamped
3702230) (splined hub end) ........
left (17 splines-31 5/, 2 O.L.) (stamped
T-17) ...........................
right (17 splines-37',2 O.L.) (stamped
T18) ............................
left (17 splines-29% O.L.) (stmp'd
3683161) ........................
right (17 splines-3038O.L.) (stmp'd
3683162) ........................
left (28 1/2 O.L.-3 1/% dia. pilot) (stmp'd
3687767) ............
....
right (29 1/2 O.L.-3 1/e dia. pilot) (stmp'd
3687768) .................... ...
left (28'/3 O.L.-2 34 dia. pilot) (stamped
3694755) ,
right (29' 4 O.L..-2 3/4 dia. pilot) (stamped
3694756) .
left (17 splines-29 54 O.L.) (stmp'd
GM641).........................
855
5.418-5.420
...........
.........................
.........................
.............
..........................
right (17 splines-30 5/ O.L.) (stmp'd
51-59 ./Z TON (exc. P/Trac.)
GM642)
60-61 Ser. 10
NOTE: It will be necessar y to use (6) 3851677 bolt.
left (27 splines-36'/ O.L.) (stamped
52-53 2 TON
3702219) ........................
right (27 splines_41 O.L.) (stamped
52-53 2 TON (exc. 2-SPD.)
3702220) ........................
right (27 splines-40 O.L.) (stamped
52-53 2-SPD
3702222) ........................
left (29 splines-36 3/4 O.L.) (stmp'd
54-55 1'/z TON w/2 -SPD. (1st Ser.) ......
3702295) ........................
54-55 2 TON (1st Ser.) ................
right (29 splines-41'4 O.L.) (stmp'd
54-55 2 TON (1st Ser.) (exc. 2 -SPD.) ....
3702296) ........................
right (29 splines-40 O.L.) (stmp'd
54-55 2 -SPD. (1st Ser.)
3702298) ........................
left (17 splines-28"/ 6 O.L.) (cast DEE
55-56 PASS .
3714781) ........................
5
55-56 PASS .
right (17 splines-30 / 6 O.L.) (cast
56
CORVETTE
AAC-3714782)
57
PASS.,
57-62 CORVETTE,
PASS .
left (17 splines-28½ 6 O.L.) .........
58
57-58 PASS.,
right (17 splines-30 6 O.L.)
57-62 CORVETTE
&NOTE: Use 3851677 rear hub bolt.
(20 splines-30?/ O.L.)
58-59 ',z TON w/P!Trac
left (17 splines-29'z O.L.)
59-64 PASS .
right (17 splines-3014 O.L.) .........
59-64 PASS .
60-68 Ser. 20 (exc. D-D, 11,000 lb. axle),
60-68 Ser. 30 (exc. 11,000 lb. axle) .....
left (stamped T49)
60-68 Ser. 20 (exc. D-D, 11,000 lb. axle),
60-68 Ser. 30 (exc. 11,000 lb. axle) .....
right (stamped T50) .................
62
Ser. 10,
left (17 splines-30 5/8 O.L.) ..........
Ser. 10 (4/WD) (1st Ser.) .........
63
Ser.
10,
62
Ser. 10 (4;'WD) (1st Ser.) .........
right (17 splines-31 54 O.L.) .........
63
63-64 Ser. 10 (exc. 4/WD),
(17 splines-30 354 4 O.L.) .............
63-64 Ser. 10 (4/WD) (2nd Ser.) .........
63-68 CORVETTE ....................
....................................
G-10 w/3.36 ratio ...............
(3119/64 O.L.) .......................
64
G-10 (exc. 3.36 ratio) ............
(17 splines-31 5/ 6 O.L.) .............
64
(30 splines-31 17/64 ) (stamped 997)
(5 hole flange) ....................
65-68 Ser. 10 .........................
(30 splines-30 35/64 O.L.) (6 hole flange)
65-67 G-10 (exc. 3.36 ratio)............
(30 splines) .......................
PASS. w/10 bolt ring gear,
65
65-67 G-10 w/3.36 ratio (w/10 bolt
ringgear) ....................
(28 splines-31 19/64 O.L.).............
65-66 Ser. 10 w/leaf type spring ........
right (3159 O.L.) ....................
left (29 54O.L.) .....................
(30 splines-3514 O.L.) ..............
(28 splines) .......................
66-67 PASS. (w/10 bolt ring gear).......
67-68 G-20 ...........................
(30 splines-31 31/,., O.L.) ............
67-68 Ser. 30 w/11,000 lb. axle .........
(27 splines-37!2 O.L.) (stamped T16).
........................
3832642#
1
21.65
3702219
1
24.10
3702220
1
24.10
3702222
1
24.10
3702295
1
24.90
3702296
1
24.90
3702298
1
24.90
3714781
1
17.55
3714782
1
17.55
3775689 ®
1
20.05
37756904
1
20.05
2346810
3798183
3798184
2
1
1
26.75
20.50
20.50
3759849
1
21.20
3759850
1
21.20
3832643
1
21.65
3796840
1
21.65
3819048
3872908
3833457
3849266
2
2
2
2
22.75
17.15
21.65
21.65
3852997
3893605
3859321
2
2
2
20.50
22.75
17.00
3863728
2494738•
2494739•
24036940
3877830
3894442
3762916
2
1
1
1
2
2
2
19.75
33.25
32.50
25.50
18.75
21.70
21.65
370217
1
1.28
wide (ground 4 sides) (1.575 and 1.1675) 372515
wide (ground 4 sides)(1.9095 and 1.0295) 473603
wide (identified by blue paint on rough
side) (1.0345) ....................
597254
1
1
1.28
1.23
1
1.23
narrow (1.012) .....................
1
1.23
................
.........................
.........................
....................
...................
.........................
....................
................
.........................
.........................
........
..............
..........
..................
5.422
SPACER-LOCK-BOLT-STUD-SLEEVE, Axle Shaft
38-42 COMM.,
46-59 '/s TON (exc. P;'Trac.),
60-61 Ser. 10 .........................
38-42 COMM.,
46-59 '2' TON (exc. P/Trac.),
60-61 Ser. 10 .........................
38-54 PASS . .........................
38-54 PASS . .........................
53-55 CORVETTE ....................
38-54 PASS.,
53-55 CORVETTE ....................
narrow (1.1485) ....................
5.420-5.422
856
597251
J-1967
47-53
54-55
67
67
UTILITY w/splined hub,
11,/ TON (1st Ser.) (exc. 2-SPD.),
Ser. 30 (D-D) w/11,000 lb. axle,
Ser. 30 w/157 W.B. (11,000 lb.
axle),
68
Ser. 30 w/11,000 lb. axle (exc.
D-D)
thrust (3' 3/ 6 O.D., 1?i6 wide) .........
54-55 1' 2 TON w/2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.)
thrust (4'/32O.D.)
38-54 PASS.,
53-55 CORVETTE
LOCK (horse shoe) ...................
38-42 COMM.,
38-59 Y TON (exc. P/Trac.),
60-68 Ser. 10, G-10-20,
65-68 PASS .
LOCK (horse shoe) ...................
40-47 UTILITY . . . . . . . . . . . . . . .........
LOCK, bolt (tangs on face—for '/2 bolt) , .
40-47 UTILITY
BOLT (Y-13 x 1 1 Yz) ......... •.......
*NOTE: Not used w/splined type shaft and hub.
46-55 COMM. (1st Ser.) (exc. '.z TON),
55-59 Ser. 3 (2nd Ser.) (exc. Y TON) .. • . BOLT (hex. hd. 1
/-13 x 1 Y) . • • , • • , . , . ,
39-40 2-SPD. w/taper hole flange .......
STUD, shaft to hub ('/a-14 x 2 Y4 ) ......
39-46 2-SPD, w /taper hole flange .......
SLEEVE, shaft stud lock
.........................
................
....................
..................
"""""""""
.........................
.......................
..............
5.425
YOKE ASSY . — FLANGE— DEFLECTOR,
63-68 CORVETTE (exc. 396, 427
w/P/Trac.)
65-68 CORVETTE w/P/Trac. .........
63-68 CORVETTE
63-68 CORVETTE
63-68 CORVETTE
....................
....................
....................
5.428
63-68
63-68
63-64
65
66-68
63
6 -68
....................
65-68 CORVETTE ....................
3703705 A.R.
472613
.75
.75
2
.23
3833322
2
3653926* 2
3653927* 16
.23
.35
.25
427566
3651377
3651372
16
16
16
(8.900)
.40
.35
3832031
3872922
3843018
3819195
2
2
2
2
9.40
13.05
8.55
.14
3820241
2
.24
Rear Axle Universal Joint
................
.................
diff. carrier 7-joint
diff. carrier 7-joint
FLANGE, rear wheel U-joint yoke ......
DEFLECTOR, diff. carrier U-joint yoke .
DEFLECTOR, rear wheel spindle
flangedust
........................
diff. carrier U-joint yoke retaining ....
LOCK, yoke flange bolt (round bridge) ..
BOLT, yoke flange ('/ 6 -20 x 1
e) ..... ,
3819196
2
.10
3860543
4
.10
454972 A. R. (8.900)
CAP, rear drive shaft 7-joint bearing....
ROLLER, rear wheel drive shaft U-joint.
REPAIR KIT, rear wheel driveshaft
U-joint ............................
BEARING ASSY., U-joint yoke trunnion .
3872909
4
7450409 A.R.
3.75
.02
3889696
3847933
4
16
8.00
.95
3820419
2
.85
3847932
16
.10
front, bearing supt., w/o bolts .......
3688455
1
2>15
inter., bearing supt., w/o bolts.......
inter., bearing supt., w/o bolts......
3688494
3703584
1
1
0
1.755
front bearing support (stamped "AD").
3718838
1
1.65
SEAL ASSY., Rear Axle "U" Joint
63-68 CORVETTE ....................
64-68 CORVETTE ....................
5.432
2
RING—LOCK—BOLT—CA —ROLLER—REPAIR KIT—BEARING ASSY.,
Rear Axle "U" Joint
CORVETTE
CORVETTE ....................
CORVETTE ...........
CORVETTE Sp. /H/Per. (396),
CORVETTE (427) ...............
CORVETTE ....................
CORVETTE ....................
5.430
3685197
diff. carrier U-joint yoke brg. oil .....
rr. wheel drive shaft U-joint yoke
trunnionbrg ........................
HANGER—SUPPORT—BOLT STRAP—WASHER, Propeller Shaft
47-55 COMM., UTIL. (1st Ser.) (exc. Y
TON, QP, RP, SP, TP, UP,
VP, S) .......................
47-55 2 TON, SBC, TY, UY, VY
(1st Ser.) ...............
...
53-55 X ((1st Ser. )• • • • • • • • • . • ..........
55
G, K w/3-SPD. (2nd Ser.) (exc.
H.D.),
56-59 Ser. 3D-3F w/3-SPD. (exc. H.D.),
60-62 Ser. 20 (D-D) w/3 SPD. (exc. 104
W.B., H.D.),
63-67 Ser. 20 (D-D) (exc. 3-SPD. H.D.,
4-SPD., 104 W.B.) .............
4'-1967
857
5.422-5.432
55
60-64
65-67
60-62
60-63
64-68
63
64-67
64-66
64-66
64-66
67-68
68
66
67
67
67
67-68
68
68
68
68
68
41-47
41-47
48-55
54-55
48-55
55-59
55
56-59
60-62
63-68
55-57
55
55-59
56-59
60-62
60-67
63
63-67
64-67
67
67
58-64
64-67
62
67-68
68
Ser. 3 (2nd Ser.) (exc. G, K w/reg.
prod. 3-SPD.),
Ser. 20-30 (D-D) w/3-SPD. H.D.,
4-SPD., H.T. (exc. 104 W.B.),
Ser. 20-30 (D-D) (exc. 104 W.B.) ...
front bearing support
3714143
Ser. 10-20 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD, 115 W.B.).....
front, support
3763335
Ser. 30 (exc. D-D),
Ser. 30 w/133 W.B. (exc. T.H.) ...
front, support
3763369
Ser. 10 w/127 W.B. (exc. 4/WD),
Ser. 10-20 (127 W.B. w/3-SPD.
H.D., 4-SPD.) (exc. 4/WD)......
front, support
3820364
Ser. 10 (SGL. UNIT) w/3-SPD.
(exc. 4/WD),
Ser. 10-20 (127 W.B. w/3-SPD.)
(exc. 4/WD),
Ser. 10 (115 W. B. w/4.11 ratio) (283),
Ser. 10 w/115 W.B. (T.H. w/6 cyl.)
Ser. 10-20 (exc. 4-SPD., D-D, 4-WD)
front support
3843848
Ser. 30 w /T.H. (exc. D-D) ........
front, support
3882315
Ser. 10-20 (CONY.) w/4-SPD.
trans. (exc. 115 W.B.),
Ser. 10 (CONV.) (115 W.B.
w/4-SPD. trans. (exc. 8 cyl.) ...
front support
3893081
Ser. 30 (D-D) w/125, 137 W.B.
(11,000 lb. axle)
front bearing support (stamped JY).... 3904720
4/WD w/127 W.B . ...............
front bearing support................ 3914421
Ser. 10-20 w/115 W.B. (4-SPD. w/8
cyl.)
front bearing support................ 3920494
Ser. 10-20 w/127 W.B. (4-SPD.
Trans.)
bearing support
3920495
Ser. 10 w/115 W.B. (396 w/New
Process 4-SPD.)
front support
3933252
Ser. 10 w/HD. 3-SPD,
Ser. 10 w/T.H.(396)
bearing support
3933264
UTIL., AN, BN, DS, ES (exc. WD,
YU, MU, OH, PP, QP) ......... SUPPORT, frt. brg. (use w/dbl. row brg.),
YT, MT, OY, OG, PX, QX ........
inter. brg. (use w/dbl. row brg.) ...... 3678780
1 TON, UTIL. (1st Ser.) (exc. RP,
SP, TP, UP, S),
'/, TON (1st Ser.)
SUPPORT, frt. brg. (use w/dbl. row brg.),
2 TON (SEC), TY, UY, VY, X (1st
Ser.)
inter. brg. (use w/dbl. row brg.)...... 3710019
3
/, TON (COWL) w/H.D., 4-SPD.
(2nd Ser.)
SUPPORT, frt. brg. (use w/dbl. row brg.) 3714145
G, Kw /3-SPD. (2nd Ser.) (exc. H.D.),
Ser. 3D-3F w/3-SPD. (exc. H.D.),
Ser. 20 (D-D) w/3-SPD. (exc. 104
W.B., H.D.),
Ser. 20 (D-D) (exc. H.D. 3-SPD,
T.H., 4-SPD., 104 W/B) ........ SUPPORT, frt. brg. (use w/dbl. row brg.) 3718835
M, Ser. 3B, 3/, TON w/H.D.,
4-SPD. (2nd Ser.) (exc. D-D),
G, K w/Prop. Brake (2nd Ser.),
1 TON (2nd Ser.),
Ser. 3D-3F w/Prop. Brake,
Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
A.T. (exc. 102, 104, 115 W.B.),
Ser. 30 (exc. 104 W.B. T.H.),
Ser. 10 w/3-SPD. H.D., 4-SPD.
(exc. D-D, 4/WD),
Ser. 20 w/3-SPD. H.D., 4-SPD.
"
(exc. 104 W.B., 4/WD),
Ser. 10-20 (127 W.B. w/3-SPD.
H.D., 4-SPD.) (exc. 4/WD),
Ser. 10 (4/WD) w/127 W.B. (8 cyl.),
Ser. 10 (4/WD) (8 cyl.)
SUPPORT, frt. brg
3735361
PASS.,
Ser. 10-20 (exc. D-D, 4/WD) ...... SUPPORT, w/cushion
3860801
4/WD w/3-SPD
SUPPORT, frt. brg. (2 wide .-7 3/4 wide) , , 3723616
Ser. 30, w/T.H.
Ser. 20 (D-D) w/T.H . ............
support bearing
3902590
................
......................
......................
1
1.65
1
2.00
1
1.85
......................
1
.96
.......................
......................
1
1
1.25
2.25
.......................
1
.90
1
1
4.50
3.75
1
.90
1
.90
1
2.50
..............
.........................
......................
..............
.............
....................
......................
....................
................
.........................
....................
...........
....................
................
..................
....................
5.432
858
1
1
5.05
1
5.10
2
.50
2
4.65
1
1.55
1
1
4.12
1.15
2
12.95
i- 1967
47-55 COMM., UTIL. (1st Ser.) (exc. 12
TON, RP, SP, TP, UP, VP, S)....
55-61 ALL w/drilled support
67
ALL w/Prop. Brake
60-61 Ser.
...........
.............
10 thru 30 .................
5.433
BOLT, brg. support hanger (front and inter.)
( /2 -20 x 14)
3688475 A.R.
.10
BOLT, brg. support hanger ('/ 6 -20 x 1 3/ 6 )
453719 A.R.(8.900)
STRAP, front ('/ wide x 6/8 long x
.
/64thk ) ........................... 2343148 A.R.
.10
WASHER, prop. shaft and bearing support
21
(1'/8 x 1 / 2 w/'2 sq. hole)
3767286
1 (1.270)
......................
...........
SEAL-RETAINER, Propeller Shaft
........................
..............
41-53 'ia TON
frt. prop, shaft bearing
3689176t 1
iNOTE: Used w/prop. shafts machined part length and w/Brg. Seal Sleeve pressed on.
48-55 1 TON, UTIL. (exc. RP, SP, TP,
UP, VP, S) (1st Ser.),
54-55 % TON (1st Ser.),
55
G, Kw /3-SPD. (2nd Ser.) (exc. H.D.),
56-59 Ser. 3D-3F w/3-SPD. (exc. H.D.),
63-68 Ser. 20-30 (D-D) (exc. 104 W.B.
3-SPD. H.D., 4-SPD.),
67-68 Ser. 30 w/T.H. (exc. D-D) ........ RETAINER, front, grease retainer,
48-55 2 TON SBC, TY, UY, VY, X
(1st Ser.)
inter prop. shaft brg. grease ......... 3685957 A.R.
55-59 1 TON (2nd Ser.),
55
i, 'q TON w/H.D., 4-SPD.
(2nd Ser.) (exc. H),
56-59 ',z, '/4 TON w/H.D., 4-SPD.
(exc. Ser. 3A),
55
G, K w/H.T. (2nd Ser.),
56-59 Ser. 3-D-3F w/H.T.,
60-62 Ser. 10-20 (127 W.B. w/3-SPD.
H.D. 4-SPD., PG.),
60-62 Ser. 20-30 (D-D) (125, 136 W.B.
w/3-SPD. H.D., 4-SPD., H.T.),
60-67 Ser. 30 (exc. 104 W.B.),
63-67 Ser. 10 (127 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. D-D, 4/WD),
63-67 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. 104 W.B., 4/WD),
67
Ser. 10 (4-WD) w/127 W.B. (8 cyl.) , RETAINER, front prop, shaft brg. grease
67
Ser. 20 (4/WD) (8 cyl.)
(14 I.D. x 2's O.D.)
3714169
2
.....................
..........
.................
1.65
.40
.50
5.435 HOUSING ASSEMBLY, Front Propeller Shaft
48-53 '4 TON
.........................
(length 31 "/3z)...................
..
3685993
1
14.60
Part
No.
3907980
3907982
3907987
3907991
3907992
3910172
3910196
3910197
3910198
3914171
3914177
3921199
3921460
3921461
3921462
3929576
3929578
3929579
3929595
List
Price
19,00
47.75
30.00
35.25
47.25
46.75
31.75
28.00
29.25
35.50
43.50
35.50
36.25
39.75
40.50
5.436 SHAFT-BEARING-BEARING UNIT-KIT-SUPPORT UNIT, Front Propeller
Shaft, Front Propeller (Shaft does not attach to rear axle)
Part
No.
609025
3689205
3689206
3689207
3689208
3690190
3707196
3707197
3707198
3707201
3707202
3707203
3707204
3707205
3707206
3717093
3717096
3718004
3718005
3721460
List
Price
29.80
27.25
36.15
22.30
30.95
11.10
25.70
28.10
30.00
24.75
28.10
31.10
39.75
29.35
33.90
36.80
39.50
36.80
29.75
42.50
-1967
Part
No.
3750746
3750747
3750748
3758579
3758580
3758581
3768972
3768976
3771377
3830039
3847095
3847096
3852316
3852318
3852338
3852486
3852556
3852557
3865264
3865265
List
Price
15.00
15.00
15.00
15.00
15.00
15.00
38.80
41.15
33.00
38.80
21.75
30.40
15.00
15.00
33.85
37.50
37.30
34.00
28.50
31.95
Part
No.
3877071
3877072
3890120
3890121
3890155
3890160
3907917
3907918
3907919
3907966
3907968
3907969
3907970
3907971
3907972
3907973
3907974
3907975
3907979
58.25
48.50
5.432-5.436
List
Price
34.50
36.25
38.45
31.70
31.80
37.30
47.00
52.50
52.75
46.00
45.25
46.50
45.75
45.50
45.25
46.25
45.25
45.75
18.00
859
Support
O.L.
Type
Splines
Unit
3443/64
10
A (w/nut)
47
', TON .........................
47
ES, QJ, QV .....................
D (w/nut)
35
10
tNOTE: Also found in intermediate section of this group.
D (w/nut)
47
QK, QL, QW, QX ................
58/0
10
''NOTE: Includes brg. seal sleeve. (See group 5.433 for correct seal).
48-53 ALL w/137, 179 W.B .............
D (w/nut)
10
32'4
48-53 UTILITY (exc. 137, 179 W.B.,
COE) ........................
D (w/nut)
56'3/6
10
48-53 COE w/134 W.B .................
D (w/nut)
294
10
D (w/nut)
48-53 COE w/158 W. B .................
10
537/0
54-55 3/4 TON (1st Ser.),
54-55 1 TON w/3-SPD. H.D. (1st Ser.)...
E
33"/6
16
54-55 3/4 , 1 TON, N w/4-SPD. (1st Ser.) ..
E
16
36
54-55 1 14 TON (1st Ser.) (exc. N) .......
E
60
16
54-55 T (1st Ser.) .....................
16
E
343/8
16
54-55 U (1st Ser.) .....................
E
57
54-55 V (1st Ser.),
E
54-55 N w/2-SPD. (1st Ser.)............
36'/8
16
54-55 W (1st Ser.),
601i
54-55 P, R w/2-SPD. (1st Ser.).........
E
54-55 X (1st Ser.) .....................
D
3254
10
54-55 2 TON (SBC) (1st Ser.)...........
D
5611/6
10
55
G, K w/3-SPD. (2nd Ser.)
(exc. H.D.),
56-59 Ser. 3D-3F w/3-SPD. (exc. H.D.),
60-62 Ser. 20 (D-D) w/3-SPD. (exc. 104
W.B., H.D.),
63
Ser. 20 (D-D) w/3-SPD., P.G.
(exc. 104 W.B., H.D.)..........
E
2716
16
55-59 D-D, 1 TON, (2nd Ser.),
60-62 D-D w/H.T. (exc. 104 W.B.) ......
E
271/2
16
3765513
55-59 1 TON (2nd Ser.) (exc. H.T.),
3
M, /4 TON w/H.D., 4-SPD.
55
(2nd Ser.) (exc. F),
56-59 Ser. 3B-3D-3E-3F w/H.D., 4-SPD.,
60-66 Ser. 20-30 (D-D) w/3-SPD. H.D.,
4-SPD. (exc. 104 W.B.),
67
Ser. 20-30 (D-D) w/125, 137 W.B...
36 V32
16
E
3765513
55
Ser. W (1st Ser.) (exc. 2-SPD.,
H.D., H.T.) ...................
E
16
5929/2
3765513
Ser. N w/2-SPD. (1st Ser.)........
55
E
35'5/6
16
PASS. (exc. O/D, 4-SPD., P.O.)
58
(white paint) ..................
D
10
28%64
58
PASS. w/O/D, 4-SPD. (blue paint),
64-66 Ser. 10 (115 W.B. w/4.11 ratio)
(exc. 4/WD, P.G., 283, SGL.
UNIT),
64-66 Ser. 10 (SGL. UNIT) (115 W.B.
w/P.G.) (exc. 4/WD)...........
D
10
2314
58
PASS. w/P/G (orange paint)......
D
10
252'/64
59-64 PASS. w/3-SPD . ................
D
10
29g9/44
59-64 PASS. w/P.G . ..................
D
2653/64
10
ANOTE: The above part is used as a replacement with T.G. Conversion Unit 3832566.
59-64 PASS. w/O.D., 4-SPD., P/Trac....
245/9
D
10
60-62 Ser. 10-20 (127 W.B. w/P.G.) .....
E
473/8
16
60-62 Ser. 10-20 (127 W.B.) w/3-SPD.
H.D., 4-SPD . .................
E
16
537/
3765513
60-66 Ser. 30 w/133 W.B ...............
E
381
16
3765513
63-67 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
4-SPD.),
63-67 Ser. 20 w/4-SPD. Trans. .........
43!2
16
E
63-66 Ser. 30 w/157 W.B. (exc. T.H.),
67
Ser. 30 w/157 W.B. (6 cyl.) (SGL.
SPD. 11,000 lb. Axle)..........
E
61/4
16
3765513
64-66 Ser. 10 (SGL. UNIT) (115 W.B.
w/O/D) ......................
21"/R,
E
10
64-68 Ser. 10-20 (127 W.B. w/6 cyl.
(exc. 3, 4-SPD., T.H.) ..........
E
3344
16
64-66 Ser. 10-20 (127 W.B. w/P.G.)
(exc. 4/WD) ..................
E
331/
16
Shaft
3690190tt
3847095t
1
1
3847096
1
3689205
1
3689206
3689207
3689208
1
1
1
3707196
3707197
3707198
3707201
3707202
1
1
1
1
1
3707203
1
3707204
3707205
3707206
1
1
1
3721460
1
3718005
1
3717093
1
3717096
3718004
1
1
3750747
1
3750746
3750748
3758579
3758580
1
1
1
1
3758581
3771377
1
1
3768972
3768975
1
1
3830039
1
3768976
1
3865264
1
3865265
1
3852318
1
4-1967
5.436
860
T
64-66 Ser. 10 (115 W.B. w/P.G.) (exc.
SGL. UNIT, 4/WD, 4.11 ratio) ...
64-67 Ser. 10 w/115 W.B., 3-SPD. (exc.
4/WD., SGL. UNIT, H.D., 4.11
ratio),,,,,,,,,,,,,,,
64-66 Ser. 10 (SGL. UNIT) w/115 W.B.,
3-SPD. (exc. H.D., 4/WD),
64-66 Ser, 10 (115 W.B.) (4.11 ratio
w/3-SPD.) (283), (exc. SGL.
UNIT, 4/WD, H.D.) ............
64-66 Ser. 10-20 (127 W.B., w/3-SPD.)
(exc. H.D., 4/WD, Warner 3-SPD,),
67-68 Ser. 10 (127 W.B. w/3-SPD.)
(250) (exc. H.D., 4/WD) .......
64-66 Ser. 20 (D-D) (125, 137 W.B.
w/P. G.) ......................
64-67 Ser. 20 (D-D) (125, 137 W.B.
w /3-SPD.) (6 cyl.) .............
65-66 Ser. 10- 20 w/leaf type springs
(OD) ...
........
.....
65-66 Ser. 10-20 w/leaf type springs
(P.G.) .......................
66-68 Ser. 20-30 (D-D) (125, 137 W.B.
w/T.H.) .....................
66-68 Ser. 20 w/T.H. (6 cyl.) (exc. D-D) .
67-68 Ser. 30 (157 W.B. w/New Process
4-SPD.) (6 cyl.) ...............
4-SPD.) (8 cyl.) ..............
67
Ser. 30 w/157 W.B. (8 cyl.) (exc.
New Process 4-SPD.)..........
67-68 Ser. 10-10 (127 W.B. w/New
Process 4-SPD.) (6 cyl.) .......
67
Ser. 10 (115 W.B. w/Muncie
4-SPD.) (8 cyl.) ...............
67
Ser. 10 (127 W.B. w/Muncie
4-SPD.) (8 cyl.),
67
Ser. 20 (Muncie 4-SPD. w/8 cyl.) , ,
67
Ser. 30 w/133 W.B. (8 cyl.) (exc.
New Process 4-SPD.) ..........
67
Ser. 30 w/133 W.B. (6 cyl.) (exc.
4-SPD.) (8 cyl . ) ..
67-68 Ser. 10-20 (127 W.B. w/New
67-68 Ser. 30(133 W.B. w/New Process
4-SPD.) (6 cyl.) ..
..
4-SPD.) (8 cyl.),
68
Ser. 10-20 w/127 W.B. (4-SPD.
w/6 cyl.) ....................
67-68 Ser. 10 w/115 W.B. (8 cyl.) (exc.
4-SPD., T.H.) ................
67-68 Ser. 10-20 w/127 W.B. (8 cyl.)
(exc. 4-SPD., T.H.) ..
.....
67
Ser. 20 (D-D w/127, 139 W.B.)
(PG.) .......................
67-68 Ser. 10-20 (127 W.B. w/T.H.)
(8 cyl.) ......................
67
Ser. 30 w/157 W.B. (6 cyl.) (exc.
67
Ser. 20-30 (D-D) w/125, 137 W.B.
(New Process 4-SPD, w/6 cyl.),
68
Ser. 30 w/133 W.B. (6 cyl.) (exc.
D.D., H.D. 4-SPD., T.H.,
11000 lb. axle) ..............
67-68 Ser. 10 w'115 W.B. (T.H. w/6 cyl.)
67-68 Ser. 10 w/115 W.B. (T.H. w/8 cyl.)
-1967
Support
Unit
ype
0. L.
Splines
F
5931/44
—
3852338
F
62s'/64
—
3852486
E
241/8
16
3852438
E
37 4344
16
3852316
E
2831/32
16
3852556
E
32si
8
16
3852557
E
393'/4
16
3877071
E
3616
16
3877072
1
E
E
32
32
16
16
3890155
3890160
1
1
E
6021/2
16
3907917
1
E
6414
16
3907918
1
E
6529%ba
16
3907919
1
E
4223/4
16
3907966
1
E
3511/
16
3907968
1
E
3723,64
16
3907969
1
E
415/8
16
3907970
1
E
374944
16
3907971
1
341/8,
16
3907972
1
E
46'/6
16
3907973
1
E
362'/2
16
3907974
1
E
4023/
D
233964
10
3907979
D
3521/4
10
3907980
E
26"/,5
16
3907982
D
36
10
3907987
E
61/32
16
3907992
E
D
D
3461//3
20/
23 s%,
16
3910172
3910196
3910197
E
861
Shaft
3907975
10
10
5.436
67-68
67
68
67
68
67-68
Ser. 20 (127 W.B. w/T.H.) (6 cyl.)
Ser. 10 (4/WD) w/127 W.B.,
Ser. 10 (4/WD) w/127 W.B. (8 cyl.)
Ser. 20 (4/WD),
Ser. 20 (4/WD) (8 cyl.) ..........
Ser. 30 w/133 W.B. (6 cyl.) (T.H.)
(exc. D-D) ....................
67-68 Ser. 30 w/133 W.B. (8 cyl.) (T.H.)
(exc. D-D) ....................
67-68 Ser. 30 w/157 W.B. (6 cyl.) (T.H.)
(exc. D-D) ....................
67-68 Ser. 30 w/157 W.B. (8 cyl.) (T.H.)
(exc. D-D),
68
Ser. 30 (D-D) w/157 W.B. (T.H.)...
68
Ser. 10 w/115 W.B. (4-SPD. trans.
w/8 cyl.) .....................
Ser. 20 (4/WD) (6 cyl.) ...........
68
68
Ser. 10 (4/WD) v.127 W.B. (6 cyl.)
68
Ser. 30 w/133 W.B. (Muncie 4-SPD.)
(8 cyl.) (exc. 11,000 lb. axle,
D-D) .........................
68
(6 cyl.) (exc. 11,000 lb. axle
D-D) .........................
68
(8 cyl.) (exc. 11,000 lb. axle,
D-D),
68
Ser. 10-20 w/127 W.B. (Muncie
4-SPD.) (8 cyl.) ...............
68
Ser. 30 (D-D) w/157 W.B. (Muncie
4-SPD.) ......................
68
Ser. 30 w/157 W.B. (11,000 lb. axle
w/8 cyl.) .....................
68
Ser. 30 w,'157 W.B. (11,000 lb.
axle w/6 cyl.) ................
68
Ser. 20-30 (D-D) w/125, 133 W.B.
(T.H.) .......................
68
Ser. 20 (D-D) (exc. 4-SPD. T.H.) ..
68
Ser. 20-30 (D-D) w/125, 133 W.B.
(H.D. 4-SPD.) .................
Support
Unit
Type
D
0. L.
32/64
E
4544
16
3914171
E
253/4
16
3914177
D
171/
16
3921199
D
215/e
16
3921460
1
D
4115/2
16
3921461
1
D
45/32
16
3921462
E
E
E
32'/e
6323/32
6415/32
16
16
16
3907903
3921073
3921074
E
281/6
16
3927901
1
E
48"/32
16
3927902
1
E
33/32
16
3927912
52(44
16
3927903
E
505',
16
3927904
E
481%
16
3927998
D
D
159/32
16
16
16
3929578
3929579
D
2316
16
3929595
E
Splines
10
Shaft
3910198
1
SHAFT, Utility, Intermediate Propeller
NOTE: (front) shown in column at right indicates part is also used as front propeller shaft.
41-46
48-53
50-53
52-53
54-55
54-55
54-55
68
SBC w/195 W.B . ................
SBC w/199 W.B .................
UTILITY w/179 W.B .............
SBC w/212 W.B .................
X (1st Ser.) .....................
Y (1st Ser.) .....................
Z (1st Ser.) .....................
Ser. 20-30 (D-D) .................
Type
D (w/nut)
D (w/nut)
D (w/nut)
D (w/nut)
E
E
E
D
O.L.
35
37',8
4336
507'
45Y
4112
54'4
335.6
Splines
10
10
10
10
16
16
16
16
Shaft
3847095
3689209
3696326
3701355
3707207
3707208
3707209
3771392
1
1
1
1
1
1
1
1
(front)
22.30
23.15
27.25
35.50
33.50
32.25
28.25
SHAFT, Front and Front Auxilliary (4 Wheel Drive)
57-59 Ser. 3A (transmission to transfer
case) ........................
57-59 Ser. 3A (transfer case to frt. axle),
57-59 Ser. 3E-3G (transmission to
transfer case) .................
57-59 Ser. 3E-3G (transfer case to frt.
axle) ........................
Type
O.L.
Splines
Shaft
E
E
1019/2
391/
16
—
2352089
3748907
1
1
23.75
38.70
E
1332
16
3748902
1
37.40
E
4711/
16
3748904
1
41.75
5.436
Y-1967
862
60-66 ALL w/4-SPD. (transmission to
transfer case)
60-66 ALL (transfer case to frt. axle) ...
61-63 4/WD (transmission to transfer
case) (exc. 4-SPD.)
64
4/WD (exc. 4/SPD.),
65-66 4/WD (transmission to transfer
case) (exc. 4-SPD.)............
67-68 Ser.
Ser 10-20 4/WD
(
) (aux, shaft).....
................
............
Type
O.L.
Splines
Shaft
E
E
19'/
4527/3 2
16
16
3890136
3890148
1
1
26.15
41.75
F
13'/
—
3784785
1
20.15
F
E
1815/,,,
19'/6
16
3907991
1
1
29.80
35.25
BEARING—BEARING UN IT—KIT—SUPPORT UNIT, Propeller
Shaft
38-40 COMM., UTIL. (exc. '/ TON, VE,
VF, WD)
„
(ND 3207) .... ,
903207
1
41-42 COMM., UTIL. (exc. AK, BK, YU,
MU),
46-59 3/4 , 1 TON (exc. DS, ES),
48-55 UTILITY (exc. RP, SP, TP, UP,
VP) (1st Ser.),
59
Ser. 3B-3E, w/H.D. 3-SPD.,
4-SPD.,
60-62 Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
P.G. (exc. D-D, 115 W.B.),
60-62 D-D (exc. 104 W.B.),
60-65 Ser. 30 (exc. D-D),
front,
67
Ser. 10 thru 30,
63-65 D-D w/3-SPD. H.D., 4-SPD. (exc.
104 W.B.),
64-65 Ser. 10 (127 W.B. w/3-SPD. H.D.,
48-55 TY, UY, VY, X, Ser. 6C (1st Ser.) .
inter. (single row) (1'/ x 2 2 „) ........
907907
1
41-47 UTIL., AN, BN, DS, ES (exc. YU,
MU, OH, PP, QP) . • .. ,
. • . , ..
front,
42-47 MT, OG, PX, QX
inter. (dbl. row) (ND 5207)) ......... ,
905207
1
58-64 PASS.,
64
Ser. 10-20 (exc. D-D, 4/WD),
65-68 Ser. 10-20 w/127 W.B. (2nd
design) (exc. 3-SPD. H.D.,
4-SPD. Trans D-D, 4/WD),
65-68 Ser. 10 (sgl. unit) w/115 W.B.
(2nd design) (exc. 3-SPD. H.D.,
4-SPD. Trans. D-D,4/WD),
65-68 Ser. 10 (dbl. unit) (115 W.B.
w/4.11 ratio) (2nd design)
(283) (exc. 3-SPD. H.D., P.G.,
4-SPD. Trans. D-D, 4/WD),
67-68 Ser. 10 w/1 15, 127 W.B. (exc.
4-SPD.),
67-68 Ser. 20 (exc. 4-SPD.)
single prop. shaft
907794
64-65 Ser. 10-20 (1st design) (exc.
1
4/WD, D-D)
w
h
BEARING UNIT, /s ield..... .
38761311 1
(NOTE: Unit consists of 1-907794 Bearing Assy., and 2-3868194 shields.
41-47 AN, BN, DS, ES,
41-47 UTIL. (exc. YU, MU, PH, PP, OP)
KIT, support repair
609037 * 1
*NOTE: Used to convert single row bearingg su pport to double
row type.
For Model usage see Prop. Shaft
Chart on preceeding pages ...... SUPPORT UNIT
3765513
1
................
............
...................
3.76
7.30
14.08
6.84
7.20
.................
35.50
.....................
12.00
5.437 RING, Front Propeller Shaft Bearing Lock
41-53 '/,TON....... , . . . . . . . . . . . . . . . .
42-47 BN, DS, ES .....
• • • • • • • .......
42-47 UTIL (exc. MU, OH, PP, QP)
5.438
snap, front , , , ,
row
.
snap, front (used w/double row br
brg.))
(inter, on MT, OG, OY, PX, QX )....
3657611
1
.20
3675399
2
.20
3657529
2
.45
3678784
1
.75
SEAL—DEFLECT
OR—SPACER—SHIELD, Propeller Shaft Bearing
41-42 AN, Y, BN, M (exc. YU, MU) . , , ,
41 7 AN, Y, BN, M, 0, DS, P, ES, Z
(, Y, N, MU, OH, PP, QP)
Q)
x1967
brg. dust (jobs w/sgl. row brg.)
x 2% O.D.)
.D.
flange
(jobs w/dbl. row brg.)
g
( 1'/4 I. D. x 51/ O.D.)
...............
..............
863
5.436-5.438
.........................
41-53 3/4TON
41-47 AN, Y, BN, M, DS, 0, P, ES, Q
(exc. YU, MU, OH, PP, QP) ....
ALLALL
46
46-47
58-64
64-65
64-65
67-68
...........................
PX ............................
DS, P, ES, Q (exc. PP, QP) ..... ,
PASS.,
Ser. 10 w/115, 127 W.B. (exc. 4/WD),
Ser. 20 (exc. 4/WD, D-D) .........
Ser. 10-20 (4/WD) w/127 W.B.
(8 cyl.)
67-68 Ser. 10 (4/WD) w/115 W.B. (8 cyl.),
67-68 Ser. 10-20 (4/WD) (6 cyl.) ........
54-55 COMM., UTILITY (1st Ser.) w/frt.,
inter, prop shaft
55-67 /z,'/,, 1 TON (2nd Ser.)...........
ALLALL
......................
...............
...........................
64
Ser. 10-20 (exc. 4/WD, D-D),
65-68 Ser. 10 (115 W.B. w/4.11 ratio),
(exc. 4/WD, sgl. unit, H.D.
3-SPD., 4-SPD., P.O.),
65-68 Ser. 10 (sgl. unit) w/115 W.B.
(exc. H.D. 3-SPD., 4-SPD.,
4/WD),
65-68 Ser. 10-20 w/127 W.B. (exc. H.D.
3-SPD., 4-SPD., 4/WD) .........
67-68 Ser. 10-20 (4/WD)
...............
5.439
brg. dust (1% I.D. x 3 1 9/3 2 O.D.) .......
brg. dust (jobs w/dbl. row brg.) (1 '/4
I. D. x 2 3/4 O.D.)
DEFLECTOR, brg. grease
(1'„ I.D. x 2'4 O.D. x '/ thk.) .........
SPACER, dust seal (intermediate),
dust seal (front)
3657612
1
.40
3675395
2
1.30
3686710
1
.45
....................
3684310
1
.45
SPACER, (1'/32 I.D. x 1 3 3 2 O.D.) ........
3740096
2
.10
SPACER, prop, shaft shield support
3931202
2
3931201
2
3705198
1
.40
3714168
1
.53
3868194
3931200
2
1
.35
3682372
1
6.35
3714195
1
.35
3682374*
1
.35
3657610
1
.85
3657524
1
.85
..................
...
SPACER, prop. shaft shield support ....
1
SHIELD, brg, rear dust (2 /4 I.D. x 2%
O.D. -3/4 thk.)
SHIELD, brg. dust
(1% I.D. x 4 O.D. x 2 % 2 thk.) .........
......................
1
SHIELD, brg dust (1',i b I.D. x 3 93 2 O.D. x
1 thk.)
SHIELD, prop. shaft
............................
..................
RETAINER—INSULATOR—CUSHION—SLINGER—FITTING, Propeller Shaft Brg.
41-47 1 TON UTIL. (exc. YU, MU, OH,
PP, QP)
frt. and int. (used w/dbl. row brg.)....
55
M, J w/cowl, H.D., 4-SPD. (2nd Ser.),
55
G, K w/prop. brake (2nd Ser.),
55-59 1 TON (2nd Ser.),
56-59 Ser. 3B-3E w/cowl, H.D., 4-SPD.,
56-59 Ser. 3D-3F w/prop. brake,
60-63 Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
A.T. (exc. 104, 115 W.B.),
60-63 Ser. 30 (exc. 104 W.B.) ...........
frt. prop. shaft and brg. supt. (73/4 O.L.)
64
ALL,
65-67 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
4-SPD.) (exc. D-D, 4/WD),
65-67 Ser. 20 w/H.D. 3-SPD.,
4-SPD. (exc. 104 W.B., 4/WD),
65-67 Ser. 30 (exc. 104 W.B.),
67
Ser. 10 (4/WD) w/127 W.B. (8 cyl.),
1
67
Ser. 20 (4/WD) (8 cyl.) ...........
all locations (2 4 I.D.) ..............
41-47 1 TON, UTIL. (exc. YU, MU, OH,
PP, QP) ..................... INSULATOR (3'/ 6 I.D. x 3 1 5/ O.D.) ....
32
*NOTE: Use w/3682372 Retainer.
1
41-53 % TON ........................
CUSHION, front (rubber-3 '/ 6 O.D.) , , ...
41-42 UTIL., AN, BN (exc. YU, MU),
48-55 1 TON, UTIL. (1st Ser.) (exc.
RP, SP, TP, UP, VP, S),
54-55 % TON (1st Ser.),
G, K (prod.) (2nd Ser.),
55
56-59 Ser. 3D-3F (prod.) (exc. prop. brake),
60-62 Ser. 20 (D-D) w/3-SPD. (exc.
104 W.B.),
63-68 Ser. 20-30 (D-D) (exc. H.D.
3-SPD., 4-SPD. 104 W.B.),
67-68 Ser. 30 w/T.H. (exc. D-D) ........ CUSHION, front
41-42 YT, MT,
48-55 2 TON SBC, TY, UY, VY, X (1st Ser.)
inter. (rubber-3'( 6 O.D.) .............
.....................
5.438-5.439
©-1967
864
55
55
55-59
56-59
60-63
60-63
60-63
64-67
48-55
55-59
55-59
55-59
55
56-59
48-55
41-47
41-47
M, J w/H.D., 4-SPD. (2nd Ser.),
G, K w/prop. brake (2nd Ser.),
1 TON (2nd Ser.),
Ser. 3B-3E w/H.D., 4-SPD.,
Ser. 10-20 w/3-SPD. H.D., 4-SPD.,
P.G. A.T. (exc. D-D, 115 W.B.,
4/WD),
Ser. 20 (D-D) w/3-SPD, H.D.,
4-SPD., A.T. (exc. 104 W.B.),
Ser. 30 (exc. 104 W.B.)
ALL
1 TON, UTIL, (exc. RP, SP, TP,
UP, VP, S) (1st Ser.),
1 TON (2nd Ser.),
M, Ser. 3B (2nd Ser.),
J, Ser. 3Ew/H.D., 4-SPD, (2nd Ser.),
G, K, (Prod.) (2nd Ser.),
Ser. 3D-3F,
2 TON SBC, TY, UY, VY, X
(1st Ser.)
AN, BN, DS, ES
UTIL. (exc. YU, MU, OH, PP, QP),
...........
...........................
.....................
.................
CUSHION, front,
all locations (2 1/2 I.D.)
SLINGER, front grease,
inter. (1 2 % 4 x 23/x).................
FITTING, front lubricating (special 4)
(used with dbl. row brg.)
............
3730827
A.R.
2.50
2019793
A.R.
.12
3678785
1
.35
5.441 SHAFT, Rear Propeller (Shaft attaches to rear axle) (Also see Group 5.436)
TYPE C
TYPE E
TYPE F
.........................
.........................
........................
38-39 PASS.
41-54 PASS . .........................
41-46 Y TON
41-53 DR, 1 TON, UTILITY (exc. short
COE)
41-53 SHORT COE (exc. QP).......... .
46-53 SHORT COE (2-SPD. w/Vac. Shift)
(exc. Q P ) ....................
47-53 '/, TON
47
QP (exc. 2-SPD.)
47-53 2-SPD. w/Vac. Shift (exc. short
COE)
tNOTE: Use with 11 leaf spring only.
48-54 '/z TON (exc. H.T.)
53-55 CORVETTE (6 cyl.)
54
'/4 TON,
55
'/4 TON w/H.D., H.T., 4-SPD.
(1st Ser.),
55-59 J, Ser. 3E w/H.D., 4-SPD.
(2nd Ser.)
54-59 1 TON (exc. 4/WD),
54-55 114 TON (1st Ser.) (exc. 2-SPD.)
54-55 S (1st Ser.) (exc. 2-SPD.).........
54-55 S w/2-SPD. (1st Ser.)
54-55 2 TON (1st Ser.) (exc. S, 2-SPD.). .
54-55 2-SPD. (1st Ser.) (exc. S) .... , , , , ,
54
Yz TONw/H.T,,,,,,,,,,,,,,
Type
C
C
C
O.L.
591/
E
E
E
63
61Y2
Splines
10
17
17
593036
3704406
3657323
1
1
1
14.35
22.80
18.95
482342
5434
16
16
3657548
605409
1
1
29.65
20.60
.........................
...............
........................
..............
.............
E
E
475/6
371/,
564
16
16
16
609999
3847344
3847097
1
1
1
25.75
25.00
27.00
E
41'4
16
3690259t
1
24.80
C
F
634
37 7/ 6
17
—
3694764
3707878
1
1
24.15
23.50
....................
F
36'/4
—
3707210
1
28.45
F
477/8
551/
48
471/
401/
575%
—
16
16
—
—
17
3707211
3707199
3707200
3707212
3707213
3707346
1
1
1
1
1
1
32.90
27.95
27.35
29.30
31.50
19.50
............
E
E
F
F
C
x1967
5.439-5.441
865
Type
55
57
55-59
55-56
57
55-62
55
55
PASS. (1st design),
TAXI,
H, Ser. 3A (exc. H.D., 4-SPD.) ....
PASS. (2nd design),
PASS. (exc. TAXI) ..............
CORVETTE (8 cyl.) .............
H w/H.D., 4-SPD. (1st Ser.) . , ... ,
3/a TON w/3-SPD. (1st Ser.)
(exc. H.D.),
55-59 J, Ser. 3E w/3-SPD. (2nd Ser.)
O.L.
F
547/s
F
F
E
55%
3435/,,
61 °/.
Splines
3719428
1
22.25
—
—
16
3722117
3712381
3711310
1
1
1
22.25
23.45
30.40
(exc. H.D.) ...................
F
64'9/2
—
3711311
1
35.75
55-59 H, Ser. 3A w/H.D., 4-S PD.
(2nd Ser.) ....................
55-59 M, Ser. 3B (2nd Ser.) (exc. H.D.,
E
61
16
3719043
1
36.75
4-SPD.) ......................
F
64'/6
—
3719042
1
36.75
F
36 1/32
—
3719044
1
34.60
F
51',
—
3717023
1
29.15
E
58'/6
16
3718008
1
29.45
F
E
44 1 3/Z
62'/32
—
16
3721462
3718007
1
1
28.75
30.40
F
56'/e
—
3725032
1
33.15
F
F
36 1/
6014
—
—
3750749
3771388
1
1
15.00
23.05
E
634
16
3768971
1
44.05
F
55%
—
3799145
1
26.50
F
22
—
3768974
1
30.50
F
68%
—
3799146
1
40.65
F
234
—
3768973
1
29.00
F
68%
—
3799649
1
37.75
F
242'/32
—
3782386
1
30.00
F
521743
—
3782380
1
29.00
E
E
5829/2
501/4
16
16
3782376
3782382
1
1
34.50
34.50
55-59 M, Ser. 3B w/H.D., 4-SPD.
(2nd Ser.) ....................
55-59 F, Ser. 3C w/3-SPD. (2nd Ser.)
(exc. H.D.),
60
Ser. 20 (D-D) (104 W.B. w/3-SPD.)
(exc. H.D.),
66
Ser. 20 (D-D) (104 W.B. w/T.H.),
67
Ser. 20-30 (D-D) w/104 W.B. (T.H.)
55-59 F, Ser. 3C w/H.D., 4SPD.
(2nd Ser.),
60
Ser. 20 (D-D) w/3-SPD. H.D.,
4-SPD. (exc. 104 W.B.),
60
Ser. 30 (exc. 104 W.B., H.T.) .....
55-59 G, Ser. 3D (2nd Ser.),
60
D-D w/125 W.B.,
55-59 Ser. 30 (exc. D-D),
68
Ser. 30 w/133 W.B. (11,000 lb.
axle) (exc. D-D) ...............
55-59 J, Ser. 3E w/H.T. (2nd Ser.) ......
55-59 K, Ser. 3F (2nd Ser.) (3" dia. tube),
60
D-D w/137 W.B ..................
58-64 PASS.,
64-66 Ser. 10 (SGL. UNIT) (exc. H.D.,
3-SPD., 4-SPD., 4/WD),
64-65 Ser. 10 (3-SPD. w/4.11 ratio) (283)
(exc. SGL. UNIT, 4/WD. H.D.),
64-66 Ser. 10 w/127 W.B. (exc. H.D.
3-SPD., 4-SPD., 4/WD),
^7-b x
Ser. 10 w/115, 127 W.B. (8 cyl.)
(exc. T.H., 4-SPD. trans.) ..... ,
60-62 Ser. 10 (115 W.B. w/P.G.)
60-66 Ser. 10 (115 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. 4/WD),
65-67 Ser. 10 (115 W.B. w/Muncie
4-SPD.) (6 cyl.) (exc. 4/WD) ....
60-62 Ser. 10 (115 W.B. w/3-SPD.)
(exc. H.D.) (paper lined)
60-62 Ser. 10 (127 W.B. w/3-SPD. H.D.,
4-SPD., PG) ..................
60-62 Ser. 10 (127 W.B. w/3-SPD.) (exc.
H.D.) (paper lined) ............
60
Ser. 20 (127 W.B. w/3-SPD., H.D.,
4-SPD., PG) ..................
60
Ser. 20 (127 W.B. w/3-SPD.)
(exc. H.D.) ...................
61-62 Ser. 20 (127 W.B. w/P.G., 3-SPD.
H.D., 4-SPD.) .................
61-62 D-D (104 W.B. w/3-SPD.) (exc.
H.D.),
63
Ser. 20 (D-D) (104 W.B. w/3-SPD.,
P.G.) (exc. H.D.) ..............
61-67 D-D (104 W.B. w/3-SPD. H.D.,
4-SPD.) (exc. 11,000 lb. axle)...
61-62 D-D (104 W.B. w/H.T.)..........
5.441
©-1967
86 6
61-66 Ser. 30 (exc. D-D),
61-67 D-D w/125 W.B. (exc. SGL. SPD.
11,000 lb. axle),
67-68 Ser. 30 (exc. D-D, SGL. SPD.
11,000 lb. axle) ...............
61-67 D-D w /137 W.B. (exc. SGL. SPD.
11,000 lb. axle) ...............
61-62 D-D (102 W.B. w/3-SPD.)
(exc. H.D.) ...................
61-62 D-D (102 W.B. w/P.G.)...........
61-64 D-D (102 W.B. w/3-SPD. H.D.,
4-S PD.),
65-67 Ser. 10 (D-D w/3-SPD. H.D.,
Muncie 4-SPD.) ...............
61-62 Ser. 20 (127 W.B. w/3-SPD.) (exc.
H.D., 4-SPD.) (paper lined),
63
Ser. 20 (127 W.B. w/3-SPD., P.G.)
(exc. H.D., 4-SPD.) (paper lined)
63-68 CORVETTE (exc. T.H.)....... ..
63
Ser. 10 (115 W.B. w/3-S PD., P.O.)
(exc. H.D.) ...............
63
Ser. 10 (127 W.B. w/3-SPD., P.G.)
(exc. H.D.) ...................
63-68 Ser. 10 (127 W.B. w/3-SPD.
H.D., 4-SPD.),
67-68 Ser. 10 (8 cyl.) w/115 W.B.
(4-SPD. trans.) (exc. 4-WD) .....
63
Ser. 10 (D-D) (exc. 3-SPD., H.D.,
4-SPD.) ......................
63-68 Ser. 20 (127 W.B. w/H.D. 3-SPD.)
64-65 Ser. 20 w/127 W.B. (1st design)
(exc. H.D. 3-SPD., 4-SPD., 4/WD)
64-67 Ser. 20 (D-D) (104 W.B. w/3-SPD.)
(exc. H.D.) ..................
64-66 Ser. 10 (D-D) (102 W.B. w/P.G.)...
64-68 Ser. 10 w/115 W.B. (exc. SGL.
UNIT, 4/WD 4-SPD., T.H.)
64
Ser. 10 (D-D) (102 W.B. w/3-SPD.)
(exc. H.D.),
64-66 Ser. 10 w/115 W.B., 3-SPD. (exc.
PANEL, SUB, 4/WD, H.D. trans.,
4.11 ratio),
67-68 Ser. 10 w/115 W.B. (6 cyl.) (exc.
4/WD) .......................
64-66 G-10 ...............
.......
65
Serl 10 w/leaf type springs .......
65-67 Ser. 20 w/127 W.B. (2nd design)
(exc. H.D. 3-SPD., 4-SPD., 4/WD)
65-67 Ser. 10 (D-D) (exc. 3-SPD. H.D.,
4-SPD., P.G.) .................
65-68 POLICE (exc. T.H.) .............
65-68 Ser. 10 w/127 W.B. (6 cyl.) (2nd
design) (exc. 4-SPD., T.H., 4/WD)
65-66 PASS. (8 cyl.) (exc. T.H.),
67-68 PASS. (exc. CAPRICE, T.H.),
67-68 CAPRICE (exc. A.T.) ............
65-66 PASS. (6 cyl.) (exc. T.H.) , , , , , , , ,
65
PASS. w/T.H . ............. . ...
66
PASS. w/T.H . ..................
67-68 CAPRICE w /P.G..
.......
67-68 Ser. 10 w/115 W.B. (New Process
4-SPD. w/6 cyl.) ..............
67-68 Ser. 10 (D-D) (New Process
4-SPD.) ......................
67-68 G-10 wi90 W.B ..................
67-68 G-10-20 w/108 W.B ..............
Type
0.L,
F
45
-
3782374
1
28.75
F
56(
-
3782372
1
33.15
F
F
44
465/2
-
3795472
3795473
1
1
21.50
21.50
E
50/32
16
3795474
1
40.50
F
F
69Y
3125%2
-
3799147
3830618
1
1
39.50
20.55
F
571/
-
3830486
1
25.60
F
693/8
-
3830485
1
39.25
F
34u/16
-
3830189
1
31.00
F
F
355%4
34%
-
3830504
383006
1
1
22.25
31.00
F
3743/44
-
3852317
1
20.85
F
F
571366
464144
-
3852454
3852498
1
1
31.15
40.50
F
57%
-
3865231
1
24.25
F
F
F
F
62 4
246
30(4
321/2
-
3852486
3857616
3877050
3877054
1
1
1
35.05
21.15
37.50
40.50
F
36'1/6
-
3890159
1
18.90
F
F
4937/44
62%j33
-
3852499
3879720
1
1
40.50
52.15
F
3133/64
-
3904698
1
18.00
F
F
F
F
F
625/32
62536
61'/a
601%4
67'32
-
-
38783404
3881405
3871141
5697871*
3895832
1
1
1
1
1
42.80
53.15
45.15
44.05
45.00
E
621)6
16
3907190
E
F
F
484%4
2127/32
3927/32
16
-
3907191
3907953
3907954
1 -1967
Splines
867
-
1
1
36.50
1
1
1
33.75
15.50
17.25
5.441
Type
O.L.
Splines
67
Ser. 30 w/125, 157 W.B., 11,000 lb.
axle,
68
Ser. 30 w/157 W.B. (11,000 lb.
axle)
67
Ser. 30 (D-D) w/104 W.B. (11,000
lb. axle
67
Ser. 30 (D-D) w/137 W.B. (SGL.
SPD. 11,000 lb. axle)
67
Ser. 10 (D-D) (P.G.),
68
Ser. 10 (D-D) (exc. 4-SPD.) .......
67
Ser. 20 (D-D) w/104 W.B. (6 cyl.)
(P.G.)
Ser. 20-30 (D-D) (104 W.B. w/New
67
67-68 CAPRICE w/T.H
67-68 PASS w/T.H. (exc. CAPRICE). . .
68
CORVETTE w/T.H
68
Ser. 10 w/115 W.B. (6 cyl.
w/4-SPD.)
68
Ser. 10 (D-D) w/4-SPD.
68
Ser. 20-30 (D-D) w/133 W.B.
(3-SPD.)
68
Ser. 20-30 (D-D) w/125 W.B.
(3-SPD,)
68
Ser. 30 (D-D) w/157 W.B. (3-SPD.),
........................
......................
..........
.......................
................
.......... ...
....................
..........
.....................
.....................
F
44
—
3907955
1
36.00
E
5711/2
16
3907956
1
47.50
F
5525/64
—
3907976
1
40.00
F
442'/64
—
3907981
1
39.75
F
525/2
—
3907986
1
32.75
E
F
F
F
6751/64
6751/64
26'/, ti t
16
—
—
—
3910171
5699400
7801540
3924148
1
1
1
1
51.50
52.75
44.05
69.50
—
—
D
387/32t
16
3927999
3927900
1
1
43.75
40.50
466t
—
3929580
1
38?4t
397/8t
—
—
3929544
3929546
1
1
44.50
'5.00
tNOTE: Tube length.
*NOTE: For U-joint repair kits use 1-5677659 (frt.) and 1-5698221 (rear).
3aNOTE: All steel shaft assy. including front and rear U-joints, and trans. sleeve yoke 3868649.
SHAFT, Transfer Case to Rear Axle (4/WD)
57-59
57-59
57-59
60
61-63
60
61-63
61-66
63-66
63-66
67-68
67
68
67
68
68
68
........................
........................
........................
Ser. 3A
Ser. 3E
Ser. 3G
Ser. 10,
Ser. 10 (4/WD) w/115 W.B. (1st Ser.)
Ser. 20
Ser. 10 (4/WD) w/127 W.B.
(1st Ser.),,,,,,,,,,,,,,,,,,,,,
Ser. 20
Ser. 10 (4/WD) w/115 W.B.
(2nd Ser.)
Ser. 10 (4/WD) w/127 W.B.
(2nd Ser.)
Ser. 10 (4/WD) w/115 W.B. .......
Ser. 10 (4/WD) (w/127 W.B.),
Ser. 10 (4/WD) w/127 W.B. (8 cyl.)
Ser. 20 (4/WD),
Ser. 20 (4/WD) (8 cyl.)
Ser. 20 (4/WD) (6 cyl.)
Ser. 10 (4/WD) w/127 W.B. (6 cyl.)
.........................
.........................
....................
....................
...........
...........
5.444
Type
E
E
E
O.L.
3213/4
32 11/
432'/2
Splines
16
E
E
2617/32
40 19/1 2
E
E
16
3748906
3748903
3748905
1
1
1
36.65
45.35
49.70
16
16
3777161
3777160
1
1
29.30
36.40
4047/64
16
3781771
3785334
1
1
29.30
37.85
E
2933/64
16
3890146
1
28.20
E
E
4133/64
513/2
16
16
3890147
3907988
1
1
29.90
31.25
F
393/
—
3914178
1
30.50
F
E
E
40
5435/64
5435/6,
—
16
16
3914179
3921073
3921074
1
1
1
40.00
95.00
90.50
3929
GUARD, Propeller Shaft
41-48 OS, ES, FS, UTILITY,
49-55 1, 2 TON, SEC (1st Ser.),
55-59 1 TON (2nd Ser.)
................
.......................
all locations
3798612* 1
*NOTE: On some models it will be necessary to relocate and drill new attaching holes in support,
1.85
5.446 NUT, Pinion Shaft Bearing
38-42 PASS., COMM.,
46-54 PASS., '2 TON,
55
' TON (1st Ser.)
................
(15/32-20 thd.-1 thick)
5,441-5.446
868
...............
3703782
1
.80
1 -1967
5.447 BEARING ASSY.-CONE-CUP, Drive Pinion-Front
38-54 PASS.,
40-42 COMM.,
46-54 '/2 TON,
53-55 CORVETTE ....................
(ND 5306W X1730A) ...............
tNOTE: Must be assembled with loading slot toward pinion gear shoulder,
40-42 UTILITY,
46-55 UTILITY (lst design),
61-68 Ser. 20-30 ......................
(ND 5310 WA) (dbl. row).............
46-60 '/a, 1 TON ..... ,
(HY A-305396) (305396ZD) (w/spacer)
*NOTE: Spacer with 442093 cannot be used with any other Bearing.
55-59 Y TON (exc. P/Trac.)
55-64 PASS.,
56-62 CORVETTE,
60-62 '/, TON,
63
Ser. 10 (4/WD) (1st Ser.) .........
(HY A-200267-Z) ...................
63-68 CORVETTE,
63-68 Ser. 10,
64-68 G-10 (exc. 3.36 ratio),
65-68 PASS. w/12 bolt ring gear),
67-68 G- 20 ...........................
(HY A-200248-Z) ...................
64-68 G-10 w/3.36 ratio,
65-68 PASS. w/10 bolt ring gear) .......
w/roller ...........................
39-53 2-SPD ......................
CONE, brg. inner, w/roller (TIM. 3875)..
1
39-40 1 4TON ........................
CONE, brg. inner w/roller .............
54-55 2-SPD. (1st Ser.) ................
CONE, brg. inner, w/roller (TIM.
HM801346) ........................
58-59 / TON w/P/Trac.,
60-68 4/WD,
CONE, brg. inner, w/roller (TIM 02872)
64-66 G-10 w/3.36 ratio,
65-66 PASS. (w/10 bolt ring gear)....... CONE
..............................
39-53 2-SPD ..........................
CUP, brg. outer (TIM. 3820) ...........
54-55 2-SPD. (1st Ser.) ........... . ....
CUP, brg. outer (TIM. HM 801310) ......
58-59 Y TON w/P/Trac.,
60-68 4/WD,
65-66 Ser. 10 w/leaf type springs ....... CUP, pinion brg. outer (TIM 02820) .....
64-65 G-10 w/3.36 ratio,
65
PASS. (w/10 bolt ring gear ....... CUP ............... .................
954780t
1
17.56
907398
442093*
1
1
30.64
40.53
7450373
1
6.49
7450984
1
5.22
7451202 A.R.
4.75
147905
1
6.34
128257
1 (5.484)
455271
1
6.40
9412260
1
3.62
7451205
128248
455272
1
1
1
3.42
2.68
2.86
9412261
1
1.94
7451206
1
1.31
5.451 KIT-BUSHING, Propeller Shaft Bushing and Seal
38-40 ALL (exc. VE, VF, WD),
41-50 PASS.,'/ TON ..................
(5/6 dia.)......................
40-50 PASS. (1st design) (exc. P.G.).
(Slip Fit Bushings) .................
40
COMM.,
41-50 '/ TON (exc. EP) (1st design), , , , ,
(Slip Fit Bushings) .................
47
'/2 TON ....... ...........
(Press Fit Bushings)...............
50
PASS, (2nd design) ..............
50
'/z TON (2nd design) .............
tNOTE: Consists of 2 bushings, 2 dowel pins, and 1 seal.
*NOTE: Consists of 2 bushings and 1 seal.
347813 A.R.
609930t 1
.03
3.90
609933t
3847423t
3695678*
3695031*
1
1
1
1
3.90
3.90
3.55
2.90
torque tube (1 54 6 I.D. x 1'/z long)......
1
rear ( 1 /32 I.D. x 1' x/32 O.D.)...........
front (1°/ 4 I.D.-no inside grooves)., ,
370416
595005
596907
1
1
1
1.35
1.35
1.35
front (1"/ 2 I.D. x 1 long) (slip fit) , , , ,
595007
1
1.55
3652328
3652601
3686064
1
1
1
1.55
1.55
1.35
3691484
1
1.35
3691475
1
1.35
BUSHING, Propeller Shaft Housing (torque tube)
38-39 UTILITY (exc. VE, VF)..........
38-39 PASS., COMM .............. .
38-53 3/a TON, HE, KF.... ,
38-40 PASS., COMM. (exc. KA, KB, KH),
41-50 '/ TON (1st design) ..............
40
PASS., COMM.,
41-50 PASS., '/ TON (exc. EP)
(1st design) ..................
40-50 PASS. (1st design) ..............
47
',z TON......... ,
50
PASS. (2nd design) ..............
50
PASS.,
'/2
TON (2nd design).......
©-1967
rear (1 14 6 I.D. x 1 17/ 2 long) (slip fit) , .
front (14 I.D. x 1 34 6 long) (slip fit).. ,
rear (1"/32 I.D. x 1"/ 6 O.D.)..........
front (1 5/ 6 I.D. x 1 23/ 2 O.D. x 1 3 4 6 long)
(press fit) .......................
rear (1'1 6 I. D. x 1"/ 6 O.D. x 1'4 long)
2
(press fit) ..................
5.447-5.451
869
50
'/ TON (2nd design) , , , , , , , , , , , , ,
51-54 PASS., '4 TON
51-54 PASS., '/ TON
..................
..................
11
front ( 1 /32 I. D. x 1 23/32 O.D.
(press fit) ...... ,
......
front ( 1 11/32 I. D. x 1 514 4 O.D.
(press fit)
rear (1'/ 6 I. D. x 1 1 % 4 O.D. x
(press fit)
x 1 long)
,
.....
x 1 3/1 6 long)
3691490
1
1.35
.......................
1 / long)
.......................
3694732
1
1.95
3694733
1
1.90
............
358073
3
,15
374633
1
.75
3685189
1
.99
7
2
5.452 SCREW, Pinion Shaft Bearing Lock
38-42 PASS., COMM.,
46-54 PASS., ',2 TON,
53-55 CORVETTE
....................
(1/
20 x 1/,, cone point)
5.453 SLEEVE—CAGE—SPACER—WASH ER, Pinion Shaft Bearing
38-39
38-46
40-46
47-54
53-55
46-53
..........................
COMM
PASS.,
COMM. (exc. DR, DS),
PASS., '/2 TON,
CORVETTE
2 -SPD. w/Vac. Shift
54-55 2 -SPD.
....................
.............
(1st Ser.) ................
lock (1 3/14 I.D. x 258 O.D.)
............
............
("A" on raised ledge) ...............
CAGE, w/brg. cups (cast 3826-T-202)
("XA" on raised ledge) .............
3682494
1
28.25
3703732
1
28.25
...........
3705722
1
.48
...................
3817864
1
.29
3849414
A.R.
.25
3852983
A.R.
.63
3880038
A.R.
58
3884938
3885939
1
1
.60
.63
lock (2'4 I. D. x 2'4 O.D.)
CAGE, w/brg. cups (cast 3826-T-202)
55-59 PASS., z TON (exc. '/Z TON w/P/
Tra c. ),
56-62 CORVETTE,
60-62 PASS., ';z TON,
63-64 PASS.,
63
Ser. 10 ( 4 /WD) (1st Ser.) .........
SPACER (tapered-2'4 O.L.)
63-66 CORVETTE,
63-64 Ser. 10 ( 4 /WD) (2nd Ser.),
63-64 Ser. 10 (exc. 4 /WD),
64-65 G-10 (exc. 3.36 ratio),
65-66 Ser. 10
SPACER ( 1 5/ 6 I. D.)
64-65 G-10 w/3.36 ratio,
65
PASS. (3 arm suspension, w/10
bolt ring gear)
SPACER ( 1 15/64 I. D. x 1 348 O.D.) .........
65-68 PASS. (4 arm suspension w/12
(22144
bolt ring gear)
SPACER
O.L.)
66-68 G-10 w/10 bolt ring gear (3.36
ratio),
66-68 PASS. w/10 bolt ring gear ........ SPACER (1 2 Y O.D.-1 1 4 O.D.) , , , , , , , ,
32
66-68 Ser. 10,
66-68 G-10 ( P/Trac. w/3.73, 4.11 ratio),
67-68 G-20 ........................... SPACER ............................
66-68 CORVETTE .................... SPACER ............................
66-68 PASS., CORVETTE w/12 bolt
ring gear ..................... WASHER, pinion brg. spacer ...........
66-68 PASS., G-10 w/10 bolt ring gear .. WASHER, pinion brg. spacer ...........
66
Ser. 10, G-10 w/12 bolt ring gear ..
WASHER, pinion brg. spacer ...........
.........................
................
................
5.457
3886318 A.R.
3886319 A.R.
3888846 A.R.
.20
.25
.20
( 244 long x s/ b dia.).................
3657332
1
.15
SPRING (1% free length) (41/ coils) .....
RIVET (2'/e x'/4 dia.) ..................
3703792
370460
1
2
.15
.03
PIN—SPRING—RIVET, Pinion to Propeller Shaft Coupling
41-54 PASS., '/2 TON ..................
50-52 PASS. w/P.G.,
53-54 PASS ..........................
38-40 UTILITY (exc. VE, VF, WD)......
5.458 SHIM, Pinion Shaft Bearing Cage
46-55 2-SPD. w/Vac. Shift (1st Ser.) ....
(.003) .............................
5.451-5.458
870
3682516 A.R.
.35
4-967
5.460
SHIM-SHIM UNIT - WASHER, Pinion Shaft Bearing
38-42 PASS., COMM.,
46-54 PASS., ',z TON,
53-55 CORVETTE ....................
(.012).............................
38-42 PASS., COMM.,
46-54 PASS., '/ TON,
53-55 CORVETTE ....................
(,015).............................
38-42 PASS., COMM.,
46-54 PASS., '/ TON,
53-55 CORVETTE ....................
(.018).............................
39-42 PASS., COMM.,
46-54 PASS., ', i, TON,
53-55 CORVETTE ....................
(.021).............................
46-60 %, 1 TON,
61-68 Ser. 20-30 ......................
(.012) ............................
46-60 '/,, 1 TON,
61-68 Ser. 20-30 .....................
(.015) .............................
46-68 '4, 1 TON ......................
(.018) .............................
46-68 34 1 TON .....................
(.021)............ .................
46-53 2 -SPD. w/Vac. Shift .............
(.157).............................
46-53 2 -SPD. w/Vac. Shift .............
(. 159).............................
46-53 2 -SPD. w/Vac. Shift .............
(.163).............................
46-53 2 -SPD. w/Vac. Shift .............
(.167).............................
46-53 2 -SPD. w/Vac. Shift .............
(. 171).............................
54-55 2 -SPD. w/Vac. Shift (1st Ser.) ....
(. 188) .............................
( . 190) .............................
54-55 2 -SPD. w/Vac. Shift (1st Ser.) ...
(, 194) .............................
( . 202) .............................
(.206)......... ,
...........
55-56 PASS., '/ TON,
56
CORVETTE ....................
(.021).............................
55-56 PASS., '4 TON,
56
CORVETTE ....................
(.024).............................
55-56 PASS., '/, TON,
56
CORVETTE .. ..................
(.030).............................
55-56 PASS., 14 TON,
56
CORVETTE ....................
(. 033).............................
55-56 PASS., '/ TON,
56
CORVETTE ....................
(.036)
58-59 'z TON w/P/Trac.,
60-68 4 /WD ..........................
front axle brg. adj. (.003-14 O.D.)
pin brg. adj ................. . ......
58-59 !-2 TON w 'P/Trac ................
front,
60-68 4/WD ..........................
frt. axle brg. adj. (.005-1 3/ O.D.),
pin brg. adj ........................
58-59
TON w/P/Trac ................
drive pinion adj. (.003)..............
58-59 ' / TON w/P/Trac ................
drive pinion adj. (.005)..............
58-59 'z TON w/P/Trac . .............
drive pinion adj. (.010). .. . . . . . . . ...
60-68 Ser. 20-30 ......................
(.024) .............................
60-68 4/WD ..........................
frt. axle, brg. adj. (.003-2 63/ O.D.),
pinion brg. adj . ....................
60-68 4/WD ..........................
pinion brg. adj . ....................
60-68 4/WD ..........................
pinion brg. adj . ............ . .......
65-66 Ser. 20 w/leaf type spring........
(.003) .............................
65-66 Ser. 20 w /leaf type spring........
(.005) .............................
(.010) .............................
(.030) .............................
(.003) .............................
(.005) .............................
(,010) .............................
57-59 PASS., CORVETTE, Ser. 3A
(exc. !2 TON w/P/Trac.),
60-62 PASS., CORVETTE, '/ TON,
63-64 PASS., ',Z TON,
65-68 PASS. (w/10 bolt ring gear),
65-68 Ser. 10, G-10-20 ................. SHIM UNIT (.021-.026) (2 g
4
O.D. x
1 2944 I. D.) .........................
3657740 A.R.
.10
3657741
A.R.
.10
3657742
A.R.
.10
3657743
A.R.
.10
3785588
A.R.
.15
3785589
3785590
3785591
3847424
3847425
3847426
3847427
3847428
3707323
3707324
3707325
3707327
3707328
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
.15
.15
.15
1.65
1.65
1.65
1.65
1.65
1.70
1.70
1.70
1.70
1.70
3708823
A.R.
.10
3708824
A.R.
.10
3708826
A.R.
.10
3708827
A.R.
.10
3708828
A.R.
.10
2346830
A.R.
.10
2346831 A.R.
1784576 A.R.
1784577 A.R.
1784578 A.R.
3785592 A.R.
.10
.12
.12
.12
.15
2402522
A.R.
.10
2402523
A.R.
.10
2402524
2353010
2353011•
23530120
2353013/0
2358870*
23588710
2358872•
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
A.R.
.10
.10
.10
.10
.10
.10
.10
.10
3893584
A.R.
.60
2
i
2
2
4
4
' /2
2
64
4
4
4
1967
5.460
871
57-59 PASS., CORVETTE, Ser. 3A
(exc. 4 TON w/P/Trac.),
60-62 PASS., CORVETTE, YZ TON,
63-64 PASS., '/Z TON,
65-68 Ser. 10, G-10-20
.................
57-59 PASS., CORVETTE, Ser 3A
(exc. 14 TON w/P/Trac.),
60-62 PASS., CORVETTE, '/ TON,
63-64 PASS., 4 TON,
65-68 Ser. 10, G-10-20
.................
63-68 CORVETTE,
63-68 CORVETTE,
63-68 CORVETTE,
46-55 2-SPD. w/Vac. Shift (1st Ser.) , , ,
5.461
SHIM UNIT (.027-.032) (2°% 4 O.D. x
129/64 I. D.)
3893585
A.R.
.60
SHIM UNIT (.033-.037) (2% 4 O.D. x
124. I. D.)
3893583
A.R.
.50
SHIM UNIT (.021-.026) (2 /64 O.D. x
1 4 164 I.D.)
3893582
A.R.
.60
SHIM UNIT (.027-.032) (2' 44, O.D. x
14144 I. D.)
3893587
A.R.
.60
SHIM UNIT (.033-.037) (2 24/64 O.D. x
1 ^4 4I.D.)
WASHER, brg. (2'/4 O.D.-54 thick) ......
3893586
690555
A.R.
2
.50
.60
high spd. (15T stamped 3891-L-636)..
low spd. (11T stamped 3891-K-635)...
3777487
3682539
1
1
.........................
.........................
24
.........................
.........................
.........................
PINION, Double Reduction
46-55 2-SPD. w/Vac. Shift (1st Ser.) ... ,
39.45
37.00
5.462 RACE—COVER—COVER ASSY.—BOLT, Double Reduction Pinion
39-55
39-55
46-55
46-55
46-55
39-55
................
................
2-SPD. (1st Ser.)
2-SPD. (1st Ser.)
2-SPD. w/Vac. Shift (1st Ser.) ....
2-SPD. (1st Ser.)
................
..................
outer (TIM. 59412)
inner w/roller, right (TIM. 59200) .....
inner w/roller, left (TIM. 59162)......
COVER, right (6- 35/64 holes)
COVER ASSY. w/Cup (cast 3838-J-114).
1
BOLT, cover to diff. carrier ( 1/- 13 x 1 4)
...........
173105
2
5.30
173106
1
10.95
436041
1
11.10
3686574
1
4.75
3682496
1
16.75
427566 A.R.(8.900)
5.464 SHIM, Double Reduction Pinion Bearing Cov e r
left (.003) (4"/ 6 I.D.) ...............
right (.003) (4 13/ 6 I. B.) ..............
3682499 A.R.
3682500 A.R.
brg. retainer (felt 2°/ 6 I.D. x 3'/2 O.D.).
3653617
1
55
SEAL, torque tube oil (1'/32 I.D. x 111/6
O.D.) .............................
3691457
1
1.20
SEAL, pinion flange oil (2 /4 I.D.).......
3651493
1
3.70
SEAL, pinion flange oil ...............
SEAL, pinion flange oil (1 37/64 I. D. x
2"42 O.D.) ..........
.............
SEAL, torque tube oil (1'/ 6 I.D. x 123/2
O.D.) .............................
3879527
1
2.50
3705796
1 (5.822)
3694736
1
.30
.30
5.469 PACKING—SEAL, Drive Pinion
40-42 WD, Y, M (exc. 2-SPD.),
46-55 COMM., UTIL. (1st Ser.) (exc.
'/z TON 2-SPD.),
55-65 34, 1 TON (2nd Ser.) .............
38-50 PASS.,
40
COMM.,
41-50 ',Z TON (exc. EP) ................
39-40
41-55
40-42
46-55
VF, WD w%2-SPD.,
2-SPD. (1st Ser.) ................
WD, Y, M (exc. 2-SPD.),
COMM., UTIL. (1st Ser.) (exc. YZ
TON, 2-SPD.),
55-66 34, 1 TON (2 Ser.),
.
66-68 Ser. 2030
......................
41-42 COMM. (exc. YZ TON) ............
51-54 PASS., '/ TON ..................
1
5.460-5.469
872
1.20
i/-1967
53-55 CORVETTE , , , , , , , , , , , , , , , , , , , ,
SEAL, pinion flange oil (1'/ I.D. x 3'/6
O.D.) .............................
3707355
55-59 PASS., '/z TON (exc. '/ TON
w/P/Trac.,),
56-59 CORVETTE,
60-62 PASS., CORVETTE, '/2 TON,
63-64 PASS.,
63
Ser. 10 (4/WD) (1st Ser.) ......... SEAL, pinion flange oil (3 5/„ O.D.) ..... 3865358
58-59 12 TON w/P/Trac ................ SEAL, pinion flange, oil,
60-68 4/WD ..........................
frt. axle pinion flange oil,
pinion flange oil, rear (1'4 I. D. x
O.D.) (Dana 14223-3) ...............
409235
63-68 CORVETTE,
67-68 Ser. 10,
64-68 G-10 (exc. 3.36 ratio),
65-68 PASS. w/12 bolt ring gear,
67-68 G-20 ........................... SEAL, pinion flange oil ............... 3852984
63-66 Ser. 10 ......................... SEAL, pinion flange oil ............... 3817883
64-68 G-10 w/3.36 ratio ............... SEAL, pinion flange oil
65-68 PASS. w/10 bolt ring gear .......
(1 /94 I. D. x 2 21/,,, O.D.) .............. 3832368
65-66 Ser. 20 w/leaf type spring ........ SEAL, pinion flange oil (1'B I.D. x 31164
O.D.) (Dana 32955-1) ...............
2469341•
1
2.05
1
1.90
1
1.55
1
1
1.60
1
1.55
1
1.70
5.476 RETAINER—B OLT—GASKET, Pinion Bearing and Oil Seal
40
41-55
46-60
61-65
66-68
67-68
46-55
39-55
46-60
40-55
46-60
58-59
60-68
65-67
61-68
67-68
WD (exc. 2-SPD),
UTILITY (prod) (1st Ser.)........
(cast 3653616) .....................
3653616
1
2.45
3
/4 , 1 TON ......................
(cast 3682199) .....................
3682199
1
2.45
Ser. 20-30 ......................
....................................
3766680
1
2.35
Ser. 20-30 (exc. 11,000 lb. axle) ...
.................................... 3883354
1
2.65
Ser. 30w/11,000 lb. axle ......... .................................... 3880666
1
4.75
UTILITY (1st Ser.) .............. BOLT, retainer (%-11 x 1/a)...........
370457
6 (5.387)
2-SPD. (1st Ser.) . . . . . . . . . . . . . . . . BOLT, brg. case to diff. carr. (/ 6 -12 x
1'/a) ...............................
444470
6 (8.900)
3
/4 , 1 TON ......................
BOLT, attaching ('/-13 x 1 154 6 )
3758226 A.R.
.20
UTILITY (prod.) (1st Ser.)........
GASKET, retainer (paper) ............. 3652257
1
.06
3
3
4, 1 TON ......................
GASKET, retainer (4 4 I.D. w/5—"/ 2
holes) ............................
3682147
1
.25
'2 TON w/P/Trac ................
GASKET, retainer (paper-2 34 I.D. x 39464
O.D.)
4/WD,
Ser. 10-20 w/leaf type springs ....
(used on front on 4/WD) (Dana 30188) ,
2346835
1
.10
Ser. 20-30 (exc. 11,000 lb. axle) ... GASKET, retainer .................... 3883369
1
.25
Ser. 30 11,000 lb. axle ........... GASKET, pinion oil seal and bearing
retainer ........................... 3880672
1
.50
5.478
GEAR UNIT, Double Reduction, w/Pinion
39-46 2-SPD. w/Mech. Shift............
39-46 2-SPD. w/Mech. Shift............
46-55 2-SPD. w/Vac. Shift (1st Ser.) . , ..
46-55 2-SPD. w/Vac. Shift (1st Ser.) , .. ,
low speed double reduction (37T-11T)
(stamped 3891-J-608 and 3892-H788) ............................
high spd. dbl. reduction (33T-13T)
(stamped 3892-Y-831 and 3891-F604) ............................
low speed double reduction (31T-11T)
(stamped 3891-K-635 and 3892-B886) ............................
high speed double reduction (32T-15T)
(stamped 3892-C-887 and 3891-L636) ............................
3847024
1
62.85
3847040
1
59.10
3847053
1
90.10
3847052
1
90.10
3682519
8
.45
3682536
690555
1
39.55
2 (5.460)
5.479 BOLT, Double Reduction Pinion Gear
46-55 2-SPD. w/Vac. Shift (1st Ser.) . , ..
(spec. hex. hd. 9/,o-18x2'% drilled).. , ,
5.481 SHAFT—WASHER, Double Reduction Pin i on
46-55 2-SPD. w/Vac. Shift (1st Ser.) ... ,
C -1967
(14T -103/, long) ....................
WASHER, pinion bearing ..............
5.469-5.481
873
5.484 BEARING ASSY.-CONE-CUP-RACE-SLING ER, Drive Pinion Rear
38-42 PASS., COMM.,
46-54 PASS., '/ TON,
53-55 CORVETTE ....................
(Hyatt OR 1506) ....................
40-55 UTILITY (prodl) (1st Ser.) (exc.
2-SPD.),
67-68 Ser. 30 w/11,000 lb. axle .........
(Hyatt U 1306) (HT 1306 TA) ........
46-60 314, 1 TON ......................
(Hyatt UC-5205-TM) ................
TON (exc. P/Trac.),
55-59
55-64 PASS.,
56-62 CORVETTE,
60-68 Ser. 10,
64-68 G-10-20,
(Hyatt HM89449-HM89410) ...........
63-68 CORVETTE,
65-68 PASS. w/12 bolt ring gear ........ ....................................
Ser. 20-30 (exc. 4/WD),
63
63
Ser. 20 (4/WD) (2nd Ser.) .........
.................................. .
4.
....................................
g rou p 355 ...................
39-46 2-SPD. w,'Mech. Shift ............ CONE, roller bearing (TIM. 455) ........
46-53 2-SPD. w/Vac. Shift ............. CONE, w/roller, brg. inner (TIM. 49585) .
54-55 2-SPD. w/Vac. Shift (1st Ser.) .... CONE, w/roller, brg. inner (TIM. HM
807046) ...........................
58-59 '/2 TON w/P/Trac ................
CONE, brg. inner w/roller.............
63-66 CORVETTE,
65-66 PASS . ......................... CONE, rear brg. inner w/roller .........
46-53 2-SPD. w/Vac. Shift .............
CUP, bearing outer (TIM. M 49520) , , , , ,
54-55 2-SPD. w/Vac. Shift (1st Ser.) .... CUP, brg. outer (TIM. HM 807010) ......
58-59 '/, TON w/P/Trac ................ CUP, rear brg. outer (TIM. 3820) .......
60-68 Ser. 20-30 ...................... CUP, w/outer race and roller ..........
63-66 CORVETTE,
65-66 PASS . ......................... CUP, rear brg. outer ..................
60-68 4/WD,
65-67 Ser. 10 w/leaf type springs . , , .... RACE, forward brg. cup (timken 31520)..
60-68 4/WD .......................... RACE, forward brg., inner w/roller
( Timken 31594) ....................
60-68 4/WD .......................... SLINGER, rr. pinion brg. oil (14 6 I. D. x
4% O.D.) ..........................
125630
1
10.86
144553
189436
1
1
12.31
9.71
7450371
1
6.56
7451155
1
9.14
7451118
1
12.83
7451203
115267
189638
1
1
1
5.94
7.52
9.02
454020
128257
1
1
12.35
6.00
7451157
457346
457342
128248
7451686
1
1
1
1
1
5.61.
4.74
5.72
(5.447)
6.51
7451156
1
3.53
187232
1
2.36
9415227
1
4.12
2403666
1
.15
wire diameter)..........
370464
1
.05
(1' 1/ 6 I.D. x'/ wire diameter).........
377722
1
.06
front and rear (1 54 4 I.D. x '/8 wire dia.) , 3652256
1
.05
2212947
1
12.50
3651442
3682528
2212950
2169421
2169420
1
1
1
3
3
12.70
15.75
.30
.06
.21
5 .489 RING, Pinion Shaft Rear Bearing Lock
38-39 UTILITY,
46-60 '/„ 1 TON ......................
38-42 PASS., COMM.,
46-54 PASS., '/ TON,
53-55 CORVETTE ....................
40-55 UTILITY (prod.) (1st Ser.),
67-68 Ser. 30 w/11,000 lb. axle .........
('/s I.D. x
5
/4
5.490 YOKE, Double Reduction Shifter
(6164
dia. hole) .....................
5.492 SLEEVE-SCREW-SPRING-PIN, Double Reduction Shifter
39-46
46-55
46-55
39-55
42-55
2-SPD. w/Mech. Shift ............
2-SPD. w/Vac. Shift1st
Ser.)
(
) ...
2-SPD. (1st Ser.) ................
2-SPD. (1st Ser.) ...............
(28 teeth) .........................
teeth) ..........
(14 teeth
...........
SCREW, yoke (/ 6 -20 x 1"4 2 ) , , , , , , , , , ,
SPRING, sleeve lock .................
PIN, sleeve lock .....................
5.500 BRACKET _ CUSHION-WAS HER, Differential Carrier Mounting
63-68 CORVETTE (exc. T.H.) .......... .................................... 3868799
68
CORVETTE w/T.H . ............
.................................... 3921657
63-68 CORVETTE .................... CUSHION, front lower ................. 3795333
5.484-5.500 874
1
2.59
1
3.25
1 (9.023)
O-I967
63-68 CORVETTE
63-68 CORVETTE
....................
....................
.................
CUSHION, front upper
WASHER, front ( 15/32 I.D. x 1'/4 O.D. x
thk.) ............................
3788637
1 (9.023)
3790768
1
(8.154)
5.504 CARRIER ASSEMBLY, Differential w/Propeller Shaft Tube
48-55 '/ TON (1st Ser.) (exc. H.T.).. , .. ,
w/adjusting nuts (cast 3698954)
(tube 60'/8 long to carrier).......... 37104031
tNOTE: On models prior to 1951 it is necessary to use 3694732 front, 3694733 rear
bushings and 3694736 seal assy.
5.505
40-42
46-55
41-42
46-53
46-60
46-55
54-55
55-64
56-62
55-57
58-59
60-62
63
1
50.30
604472
1
40.15
605925
3699534
3682531
3702284
1
1
1
1
61.90
36.25
82.80
60.30
3789870
1
27.30
.....................
3718011*
1
34.95
.................... ....................................
3766685
3876475t
1
1
36.25
32.25
3917861
3883378
3880668
1
1
1
32.25
36.25
85.10
(3.70 Ratio).......................
3743966
1
127.40
(4.56 Ratio).......................
3743970
1
127.40
(4.11 Ratio).......................
3748977
1
127.40
(3.70 ratio) ........................
(4.11 ratio)
(4.11 ratio)
(4.56 ratio)
(4.56 ratio)
(3.70 ratio)
(4.56 ratio) ........................
(4.11 ratio) ........................
3880129
3876471
3880131
3876473
3894565
3899137
3899141
3899139
1
1
1
1
1
1
1
1
188.35
199.50
188.35
187.85
188.35
199.50
199.50
199.50
3758046
3880664•
3880663•
1
1
1
90.15
265.00
265.00
3652346
4
.20
CARRIER ASSEMBLY, Differential, w/Cap
UTILITY
(exc. H.D.),
1 1TON (1st Ser.)
(cast 3652280) .....................
UTILITY w/H.D.,
2 TON .........................
(cast 3661871) .....................
%, 1 TON ......................
(cast 3699535) .....................
(5800-M-429 or 3 8 00-N-430)..........
2 TON (1st Ser.) (prod.)..........
(cast 3702281) (6-37 teeth)
PASS.,
CORVETTE
'/2 TON,
'/z TON (exc. P/Trac.),
Ser. 10,
Ser. 10 (4/WD) (1st Ser.) .........
(cast 3707340)
*NOTE: Also used on front axle on 1957 thru 1959.
61-65 Ser. 20-30 ......................
....................................
63-66 CORVETTE
¶NOTE: When using 3876475 in place of 3822962, the carrier mounting bracket
nuts and bolts should be discarded and replaced by 2 of 3846867 bolt
and 3774712 nut, and 1 of 103374 cotter pin.
67-68 CORVETTE
66-68 Ser. 20-30 (exc. 11,000 lb. axle) ...
67-68 Ser. 30w/11,000 lb. axle ......... ....................................
...............
..........
.................... ....................................
.................... ....................................
....................................
C ARRIER A SS Y., Differential (Positraction) (Co mplete w/Ring Gear and Pinion)
57-62 CORVETTE,
59-64 PASS
57-62 CORVETTE,
62-64 PASS . .........................
58-59 PASS.,
58-62 CORVETTE,
62-64 PASS
63-66 CORVETTE (exc. Sp. H/Per,
396, 427) .....................
63-65 CORVETTE
65-66 CORVETTE (exc. 427) ...........
65
CORVETTE (exc. Sp. H/Per., 396)
66
CORVETTE
67-68 CORVETTE
67-68 CORVETTE
67-68 CORVETTE ....................
..........................
..........................
....................
....................
....................
...................
........................
........................
........................
........................
........................
CARRIER ASSY., Differential (exc. Positraction) (Complete w/Ring and Pinion)
59-64 PASS.,
62
CORVETTE ....................
67
Ser. 30 (D-D) ...................
67-68 Ser. 30 w/11,000 lb. axle .........
(3.08 ratio) ........................
(5.43:1 ratio) ......................
(6.17:1 ratio) ......................
5.506 SCREW-BOLT-DOWEL, Differential Carrier Cap
40-42 COMM.,
46-59 '/z TON (exc. P/Trac.),
57-59 Ser. 3A w/4/WD,
60-62 Ser. 10,
63
Ser. 10 (4/WD) (1st. Ser.) ........
r 1967
(°( -12 x 2'/)
...
...................
5.500-5.506
875
46-66 3/4 , 1 TON,
57-59 Ser. 3G (PANEL) w/4/WD
65-68 Ser. 20-30 (exc. 11,000 lb. axle) ...
55-64 PASS.,
56-62 CORVETTE ...................
63-68 CORVETTE, Ser. 10 (exc. 4/WD),
63
64-68 G-10-20,
65-68 PASS .
.........................
67-68 Ser. 30 w/11,000 lb. axle .........
group 5.383 ...................
40-55
67-68
46-66
67-68
UTILITY (1st Ser.),
Ser. 30 w/11,000 lb. axle ........
'i4, 1 TON,
Ser. 20-30 (exc. 11,000 lb. axle) ...
(46-12 x 3'/e) ......................
( /e -11 x 33/e) • • • • • • • • • • .. • • • .......
(1/2
3682128
3691473
4
4
.30
.35
3705721
4
.15
..............................
3818764
4
.15
-11 x 3 3,) .........
3705826
4
.55
-13 x 2^/4 ) (280-M) ...............
BOLT
BOLT, bearing (
BOLT ..............................
2270887
DOWEL .............................
3652274
4
.20
DOWEL .............................
3682129
4
.20
(9% x 10%) ........................
593012
1
24
(141/4
(10% O.D. x 9'/ I.D.) (10 holes)......
O.D. x 12%2I.D.)..............
370246
3651365
1
1
.25
.25
(1329/33 O.D. x 11% I.D.) .............
3652258
1
.25
(12Y4O.D. x 10% 2
) ...............
3665607
1
.25
x 11%) .......................
x 10) .........................
3769870
3818793
1
1
.43
.24
.71
5.508 GASKET, Axle Housing to Differential Carrier (pa p er)
38-54 PASS.,
53-55 CORVETTE ....................
38-42 COMM.,
46-59 '/ TON (exc. P/Trac.),
60-62 Ser, 10,
63
Ser. 10 (4/WD) (1st Series) .......
39-55 2-SPD. (1st Ser.) ...............
67-68 Ser. 30 w/11,000 lb. axle
.......
46-66 3/4 , 1 TON,
67-68 Ser. 20-30 (exc. 11,000 lb. axle) ...
55-64 PASS.,
56-62 CORVETTE ...................
63-68 CORVETTE ...................
(913/1
(9%4
I. D.
5.510 CASE - CASE UNIT - BOLT, Differential and Planet
NOTE: Differential case halves are not sold separately.
♦ ANOTE: Indicates repeated number; see first listing for price.
D i ff er ent i a l Assy. (C a s e w / int e rnal gears)
CORVETTE w/P/Trac.
57-62 ...............................
61-62 ...............................
63-68 ...............................
63-68 ...............................
w/4.11, 4.56 ratio..................
w/3.36, 3.55, 3.70 ratio.............
w/2.73,3.08,3.36,3.55, 3.70 ratio ...
w/4.11, 4.56 ratio (Eaton 12363-2)....
3853552
3853550
3863415
3863417
80.50
80.50
75.55
77.75
PA SSENGER w/P / Trac.
57-64 ...............................
57-64 ...............................
65-68 ....
------
(exc. 4.11, 4.56 ratio) ...............
w/4.11, 4.56 ratio ..................
w/3.08, 3.36, 3.55, 3.70 ratio (Eaton
65-68
w/3.07, 3.31, 3.55, 3.73 ratio (Eaton
11171-2)
12666-4)
65-68
66-68
68
.....................
(NOTE: Use with 10 bolt ring gear.
rNOTE: Use with 12 bolt ring gear.
.
........................
.......................
w/4.10, 4.56, 4.88 ratio (Eaton
ED12666-5) ....................
w/2.73 ratio (Eaton 12666-6) ........
w/2.56, 2.73 (Eaton 11171-3) ........
3853550
3853552
1
1
80.50
1
67.75
3887369 T 1
65.70
3887370
3887371
3910824(
1
69.75
1
1
69.75
3825863
3826398
3858916
1
1
1
102.50
83.00
77.75
3887368(
1
80.50
67.75
TRUCK w/P/Trac.
60-62 Ser. 10 .........................
63
Ser. 10 w/3.73 ..................
64
G-10 w/3.36 ....................
....................................
....................................
(Dana 23619X) .....................
5.506-5.510
-1967
876
.............
64
G-10, Ser. 10 w/3.73
65-66 Ser. 10 (D-D) w/3.73,
65-66 Ser. 10, G-10 w/3.73, 4.11........
65-68 G-10 w/3.36 ratio
67-68 Ser. 10 w/3.73, 4.11,
67-68 G-10-20 w/3.73, 4.11
...............
............
(Dana 23 6 50X).....................
.................
..................
(Eaton EO 11172-2) .................
(Eaton ED 11172-1)
(Eaton 11171-2). .
3857945
1
83.00
3866106
3887368
1
1
69.75
67.75
3894428
1
69.75
1
15.60
1
16.20
1
35.35
1
23.30
1
48.75
1
1
1
14.90
50.10
52.50
1
14.90
1
13.90
1
15.25
1
1
59.75
52.50
1
59.75
1
17.50
1
1
15.60
15.60
Differential Case (Case less internal gears )
38-52
53
40-42
46-53
55-57
60-62
PASS. (exc. P.G.),
SDL . ..........................
(cast 593009)
593009
COMM.,
' TON,
'/ TON w/O/D,
Ser. 10 w/4.11 ratio (exc. max.
econ. equip.)
(cast'3652336)(daub of orange paint) . 3867833
40-42 UTILITY (exc. H.D., 2-SPD.),
42-53 UTILITY,
54-55 1'/2 TON (1st Ser.) (exc. 2-SPD.),
67-68 Ser. 30 w/11,000 lb. axle .........
w/cover (cast 3 661 872-73). . . . . . .. . . .
605922*
46-66 ;, 1 TON,
67-68 Ser. 20-30 (exc. 11,000 lb. axle) ...
(cast 3664592-93))
609803*
*NOTE: Bolts holding case together to be discarded when installing.
46-53 2-SPD. w/Vac. Shift
(stamped 3835-C-263)
(A20-3835-D-264) .................
610000t
tNOTE: Ream holes after gear assembly. See Truck Shop Manual, Section 4.
50-52 PASS. w/P.G.,
53
PASS. (exc. SDL.),
54
PASS.,
53-55 CORVETTE
(cast 593009) (identified by blue paint) 3691463
54-55 2 TON (1st Ser.) (exc. H.D., 2 spd.)
(cast 3702226)
3707515
(cast 3703727)
3707538
55-56 PASS. (exc. O/D),
56
CORVETTE (exc. 4.11 ratio) .....
(cast 3707311)
3707311
55-59 PASS. w/O.D. (exc. P/Trac.),
56
CORVETTE w/4.11 ratio (exc.
P/Trac.)
w/thrust washer.................... 3885292
57-62 CORVETTE (exc. P/Trac.),
57-59 PASS. (1st design) (exc.
O/D, P/Trac.),
59-64 PASS. (2nd design) (exc. P/Trac.) .
3867386
57
PASS. w/P/Trac. (O.D.),
57-62 CORVETTE w/P/Trac. (4.11,
4.56 ratio),
58-59 PASS. w/P/Trac. (O/D w/4.11),
63-64 PASS. w/4.11, 4.56 ratio .........
(Dana 22212X)
3777724
58-59 '2 TON w/P/Trac. (3.92 ratio) ....
w/cover...........
238806623
®NOTE: Includes 2 extra 534935 Plates for replacing early design cases which had 4 plates
and now utilize 6.
57-64 PASS. w/P/Trac. (exc. 4.11,
4.56 ratio),
57-62 CORVETTE w/P/Trac. (3.36, 3.55,
3.70 ratio)
w/cover (Dana 22211X)
3777659
60-62 4/WD,
63
Ser. 20 (4/WD),
63
Ser. 10 (4/WD) (1st Ser.) .........
front axle (Dana 31441)
2402528
54-62 'z TON (exc. O/D, P/Trac.),
63
Ser, 10 (4/WD) (1st Ser.) .........
w/side gear thrust washer. . . . . . . . . .
3867832
3-665 CORVETTE (exc. P/Trac.) ,,, , , ,
, , , , , , , , , , , , ,,,
3845299
63-64 CORVETTE w/P/Trac. (4.11,
4.56 ratio)
(Dana 32976) (cast C 32459) ......... 3865297
63-64 CORVETTE w/P.Trac. (exc.
4.11, 4.56 ratio)
(Dana 32975)
3865296
63-68 Ser. 10 (3.07 ratio) (exc. D-D)
3865968
**NOTE: When using 3846423 on 1963 models it will be
necessary to use two
3846425 differential side gear washers.
63
Ser. 10 w/P/Trac., (3.73 ratio)....
(Eaton 30060)
3830668
63
Ser. 10 (4/WD) (2nd Ser.) .. ,
..
2402526
63-68 Ser. 10 (exc. P/Trac., 3.07 ratio),
64-68 G-10 (exc. P/Trac., 3.07 ratio),
67-68 G-20 (exc. P/Trac.) .............
rear axle w/washers ................ 3863182
......................
.................
..................
.............
....................
.....................
.....................
.....................
.....................
....................................
.....................
....................
.............
....................
...............
.... , .............. ......................
.......
1
31.50
1
1
30.10
16.50
.............
1
1
38.85
17.50
1
17.25
©-1967
877
5.510
64
Ser. 10, G-10 w/P/Trac.,
65-66 Ser. 10 w/P/Trac. (exc. 4/ WD,
leaf type springs),
65-66 G-10 w/P/ Trac. (3.73, 4.11 ratio),
67
Ser. 10 (4/WD) w/P/Trac. ........
*NOTE: When using 2475248 in place
be used.
64-68 Ser. 20 (4/WD),
65-67 Ser. 20 w, / leaf type springs .......
64-68 CORVETTE w/P/Trac., (4.11,
4.56 ratio)
64-68 CORVETTE w/P/Trac., (3.08,
3.36, 3.55, 3.70) ..............
65-68 G-10 w/3.36 ratio (exc. P/Trac.),
65-68 PASS. (3.08, 3.36, 3.55, 3.70
ratio) (exc. P/Trac.) , , , , , , , , , , ,
Ser. 10 (4/WD) (3.73 ratio),
64
65-68 Ser. 10 (4/WD),
65-67 Ser. 10 w/leaf type springs , , , , , , ,
64
G-10 w/P/Trac. (3.36 ratio)......
65-67 PASS. w/T.H. (2.73 ratio) (exc.
P/Trac.)
65-68 PASS. (3.07, 3.31, 3.55, 3.73
ratio) (exc. P/Trac.),
65-66 STA. WAG. (exc, P/Trac.) ........
65-68 PASS. w/P/Trac. (4.10, 4.56, 4.88
ratio) (8 cyl.)
65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio),
65-68 G-10 w/P/Trac. (3.36 ratio) ..,,.,
65-68 Ser. 10 w/P/Trac. (3.73, 4.11
ratio) (exc. 4/WD),
65-68 G-10 w/P/Trac. (3.73, 4.11 ratio),
67-68 G-20 w/P/Trac
65
PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio) (1st design),
65
G-10 w/P /Trac. (3.36 ratio) (1st
design)
65
PASS. w/P/Trac. (4.10, 4.56, 4.88
ratio) (8 cyl.)
65-68 PASS. w/P/Trac. (3.07, 3.31,
3.55, 3.73 ratio)
65
PASS. w/P/Trac. (3.07, 3.31, 3.55,
3.73 ratio)
65-66 Ser. 20 (leaf type springs) (4.56
ratio) (exc. P/Trac.)...........
65-66 Ser. 20 (leaf type springs) (4.10
ratio) (exc. P/Trac.)...........
65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio) (2nd design),
65-68 G-10 w/P/Trac. (3.36 ratio (2nd
design)
66-68 CORVETTE (exc. P/Trac.) .......
66-68 PASS. w/P/Trac. (2.73 ratio) .....
68
PASS. (P/Trac. w/2.56, 2.73 ratio)
60-62 Ser. 10 w/P/Trac
46-55 2-SPD. w/Vac. Shift (1st Ser.) , , ,
46-55 2-SPD. w/Vac. Shift (1st Ser.) . , ,
57-59 '2 TON w/P/Trac . ..............
57-62 PASS., CORVETTE w/P/Trac. ...
60-62 PASS., CORVETTE w/P/Trac.,
63-64 PASS. w/P/Trac ................
65-66 Ser. 20 w/P/Trac. (leaf type
springs) ......................
....................
....................
.................
..................
......................
.................
...............
....................
......................
................
..................... .
(Dana 33284)
2475248*
of 3849914 pinion shaft 3869308 must also
.............
......................
1
40.45
2457067
1
18.50
(Eaton 30175)
3869343
1
36.15
(Eaton 30117).,....................
3869314
1
35.15
.................
3878439
1
15.00
front axle (Dana 32681) . . . . . ....... .
(Dana 32974). . . . . . . . . . . . . . . . .....
2457066
2466839
1
1
18.50
37.95
w/12 bolt ring gear..........,......
3869789
1
14.85
w/12 bolt ring gear ..... .
3852989
1
13.70
(Eaton ED 30174)
...........
..................
3869316
1
36.15
(Eaton ED 30116)
..................
3869342
1
36.15
(Eaton ED 32063)
..................
3869286
1
36.25
3869321
1
39.25
3869313
1
58.10
3869315
1
34.75
3869312
1
39.25
2358880
1
26.00
23762700
1
26.00
3888074
3878454
3890129
3918830
3794013
3682519
3682520
1
39.25
1
15.60
1
34.20
1
45.00
1
43.35
8 (5.479)
8 (5.531)
w/10 bolt ring gear
......................
(Dana 33278) ......................
(Eaton ED 30140) ..................
(Dana 33276) ......................
(Dana 30258) ......................
(Dana 33259)
(Dana 30357)
......................
(Dana 33289) ......................
....................................
w/12 bolt ring gear (Eaton 32088) ....
w/10 bolt ring gear (Eaton 32118) ....
CASE UNIT, w/clutch plate guides ... , ,
BOLT, case assy. (°/ b -18 x 2/ drld.). ,
BOLT, case assy. (91 6 -18 x 5 3/8 drld.), ,
BOLT, case assy. (z-16 x 2y,)
(R.H. thread) ......................
BOLT, case assy. ( 3/8 -24 x 2/4)
(L.H.thread)......................
454908
8
3777003
8
.25
BOLT, diff. case (Dana 30836-1) .......
2392357
8
.35
5.510
87
8
(8,900)
x_1967
5.511
PLATE-PLATE UNIT-CLUTCH UNIT-CLUTCH ASSY. -CUP-PIN UNITCAGE-SPRING-RETAINER-RING-SHIM-SPACER-GUIDE, Differential
Clutch (Positraction)
57-62
58-59
60-61
63-64
57-62
58-59
63-64
63-64
64-65
64
65
PASS., CORVETTE,
'? TON,
4/WD (front axle),
PASS ..........................
PASS., CORVETTE,
'/z TON,
PASS ..........................
CORVETTE,
Ser. 10 w/3.73 ratio,
G-10 w/3.36 ratio,
PASS. w/3.08, 3.36, 3.55, 3.70
ratio (1st design),
65
G-10 w/3.36, 3.73, 4.11 ratio
(lst design) ..................
64-68 CORVETTE,
65-68 PASS.,
65-68 G-10 w/3.36 ratio,
67
Ser. 10 (exc. 4/WD) ..............
(Belleville type) (ink stamped-. 095). .
3777268
2
1.55
(.095 thick)........................
534935
A.R.
1.26
(Dana 32328) (spring seat plate)
(No tangs on plates)..............
3830747
2
1.74
pressure (Eaton ED 94153) (Spring seat
plate) ........................... 3869320
2
1.55
PASS. w/3.07, 3.31, 3.55, 3.73
ratio,
65
PASS. w/4.10, 4.56, 4.88 ratio
clutch friction plate (Spring seat plate)
(8 cyl.) ......................
(Dana 33274) .................... 3869310
1
1.79
65-68 G-10 w/3.36 ratio,
65-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio (10 bolt gear) (2nd design) .
(Dana 34001) (4 tangs on each plate) .. 2494749 A.R.
.62
57-59 PASS., CORVETTE, ' %2 TON,
60
PASS., CORVETTE (1st design) .. PLATE UNIT, w/discs ...............
3777611* , 1
11.25
*NOTE: When using on 58-59 1/2 TON w/P/Trac. 2 extra 534935 Plates are required.
tNOTE: Consists of 4 plates and 4 discs. (R.H. thread bolt assy.).
63-64 PASS . ......................... PLATE UNIT, w/discs (Dana 22719X) .. 3865208A 1
13.35
ANOTE: Consists of 6 plates and 4 discs.
60-62 Ser. 10 ......................... PLATE UNIT, w/discs ..............
1
3797838
16.15
®NOTE: Consists of 8 plates and 6 discs.
63
Ser. 10 w/3.73 ratio ............. PLATE UNIT, w/discs (EDS 22065) .... 383067611 1
17.80
tNOTE: Consists of 10 plates and 8 discs.
63-64 CORVETTE,
64
Ser. 10 w/3.73 ratio,
64
G-10 w/3.36,
65-66 Ser. 10 (exc. 4/WD),
65-66 G-10 w/3.73, 4.11 ratio,
67
Ser. 10 (4/WD) w/P/ Trac. ........ PLATE UNIT, w/discs (Dana 23230X) .. 3830740§ 1
14.55
§NOTE: Consists of 8 discs and 8 plates.
64-68 CORVETTE,
65-68 G-10-20,
65-68 Ser. 10 w/3.73 ratio (exc. 4/WD),
65-68 PASS . ......................... PLATE UNIT, w/discs (Eaton) ........ 9781862AA 1
17.25
AANOTE: Consists of 10 eared discs and 8 splined discs.
65-68 PASS. w/3.08, 3.36, 3.55, 3.70
(2nd design),
65-68 G-10 w/3.36 ratio (2nd design) .... PLATE UNIT (Dana 24652X) (4 tangs
on plates) ......................... 3888070
1
16.45
65
PASS. w/3.08, 3.36, 3.55, 3.70
ratio (1st design) .............. PLATE UNIT, w/discs (No tangs on plates)
65
G-10 w/3.36 ratio (1st design) ....
(Dana 246629X) .................... 3879850
1
17.25
65-66 Ser. 20 w/leaf type springs ....... PLATE UNIT, w/discs (Dana 22938X) .. 2434741• 1
17.80
4/WD) ....................... PLATE UNIT, w/discs (Dana 22937X) ..
2434740
1
10.90
61-68 Ser. 20-30 ...................... CLUTCH UNIT (No Spin) .............. 3795966** 1
125.00
*NOTE: No Spin differential complete less case.
61-68 Ser. 20-30 ...................... CLUTCH ASSY., w/cam (No Spin) .....
2426036
2
24.65
eeNOTE: Part of Clutch Unit 3795966.
65
8-1967
5.511
879
64
65
CORVETTE (2nd des.),
PASS. w/3.08, 3.36, 3.55, 3.70
ratio,
65-66 Ser. 10 (exc. 4/WD),
65-66 G-10 w/3.73, 4.11 ratio,
67
Ser. 10 (4/WD) w/P/Trac. ........ CUP, press. plate spring (Dana 33230) . . 3867896
8
61-67 Ser. 20-30 ...................... PIN UNIT, cl. ctr. cam, w/snap ring .... 2428675
1
63-64 CORVETTE,
64-66 Set. 10 w/3.73 ratio,
64
G-10 w/3.36 ratio,
65-66 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,
65-66 G-10 w/3.36, 3.73, 4.11 ratio,
67
Ser. 10 (4/WD) w/P /Trac. ....... . CAGE, clutch friction plate (Dana 32327) 3830746
2
65
PASS. w/3.07, 3.31, 3.55, 3,73
ratio,
65
PASS. w/4.10, 4.56, 4.88 ratio
CAGE, clutch friction plate (w/12 bolt
(8 cyl.) ......................
ring gear) (Dana 33273)
3869309
1
61-68 Ser. 20-30 ...................... SPRING, clutch (No Spin)
2426042
2
63-64 CORVETTE,
64-66 Ser. 10,
64-66 G-10 w/3.73, 4.11 ratio,
65-66 Ser. 20 w/4.11 ratio (exc. 4/WD,
D-D),
65-66 Ser. 10 w /3.73 ratio (exc. 4/WD),
67
Ser. 10 (4/WD) w/P/Trac. ........ SPRING, clutch (Dana 32823)
3854101
4
65
PASS. w/3.07, 3.31, 3.55, 3.70
ratio ......................... SPRING, clutch press plate
65
PASS. w/4.10, 4.56, 4.88, (8 cyl.)
w/12 bolt ring gear (Dana 33275) ..... 3869311
4
65
PASS. w/3.08, 3.36, 3.55, 3.70
ratio (1st design),
65
G-10 w/3.36 ratio (1st design) .... SPRING, clutch pressure plate (2"44
free length) (Dana 33802) (free length
of2'(4") .......................... 3879833
2
65-68 G-10 (P/Trac w/3.36 ratio) (2nd
design),
65-68 PASS. w/3.08, 3.36, 3.55, 3.70
SPRING, clutch pressure plate (Dana
ratio (2nd design)
33824) (free length of 1 ' 1/32")
3888078
2
65-68 PASS .
SPRING, pressure plate (Eaton ED
65-68 G-10 w/3.36 ratio
72043)
3890860
4
64-68 CORVETTE,
66
PASS.,
66-68 G-10 w/3.36 ratio,
67-68 Ser. 10 (exc. 4/WD)
SPRING, pressure plate (Eaton ED-7976) 3890899
2
66-67 PASS. w/P/Trac. (2.731) (8 cyl.).
SPRING, diff. clutch pressure plate.....
3888059
4
61-68 Ser. 20-30
RETAINER, clutch (No Spin)
2426043
2
63-64 PASS
RING, side gear......................
3745318
2
58-59 /z TON
RING, side gear...................... 2370716
2
61-68 Ser. 20-30
RING, clutch hold out (No Spin) ........ 2426040
2
60-66 Ser. 10 w/leaf type spring (exc.
4/WD
RING, side gear (Dana .14Yb)
2409731• 2
65-66 Ser. 20 w/leaf type spring ........ RING, side gear (Dana 31496)
2410508• 2
60-63 Ser. 10 w/3.73 ratio
SHIM (.005 thick) (Eaton ED 92314-5) • .. 3772608 A.R.
60-63 Ser. 10 w/3.73 ratio
SHIM (.007 thick) (Eaton ED 92314-7) ... 3781256 A.R.
60-63 Ser. 10 w/3.73 ratio
SHIM (.010 thick) (Eaton ED 92314-10) .. 3772609 A.R.
64-68 CORVETTE,
65-68 PASS.,
65-68 Ser. 10 w/3.73, 4.11 ratio (exc
4/WD),
65-68 G-10,
67-68 G-20
SHIM (.005) (Eaton 94128-5)
977347
A.R.
64-68 CORVETTE,
65-68 PASS.,
65-68 Ser. 10 w/3.73, 4.11 ratio (exc.
4/WD),
65-68 G-10,
67-68 G-20
SHIM (.007) (Eaton 94128-7)
9778348 A.R.
.............
.........................
...............
..............
......................
..........................
.........................
......................
.......................
.............
.............
.............
.33
52.75
1.55
.............
............
1.69
.85
..........
.75
.75
.75
.75
............................
.40
..........
.35
.75
5.00
..........
..........
12.30
11.45
8.75
10.40
13.35
.60
.60
.60
...........................
............
.60
...........................
...........
.60
5.511
880Chevrolet
G-1967
Motor Division
64-68 CORVETTE,
65-68 PASS.,
65-68 Ser. 10 w/3.73, 4.11 ratio (exc.
4 /WD),
65-68 G-10,
67-68 G-20
65
65-68 Ser. 10 w/3.73, 4.11 ratio (exc.
4/WD),
65-68 G-10 w/3.36, 3.73, 4.11 ratio,
66-68 PASS.,
67-68 G-20
65
65-68 Ser. 10 w/3.73, 4.11 ratio,
65-68 G-10 w/3.36, 3.73, 4.11 ratio,
66-68 PASS.,
67-68 G-20
65-68 PASS.,
66-68 G-10 w/3.36 ratio,
67-68 Ser. 10, G-20 (exc. 4/WD) ........
65-68 PASS.,
66-68 G-10 w/3.36 ratio,
67-68 Ser. 10, G-20 (exc. 4/WD) ........
65-68 PAS6.,
66-68 G-10 w/3.36 ratio,
67-68 Ser. 10, G-20 (exc. 4/WD) ........
65-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,
65-68 G-10 w/3.36 ratio
65-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,
65-68 G-10 w/3.36 ratio
65-68 PASS. w/3.08, 3.36, 3.55, 3.70
ratio,
65-68 G-10 w/3.36 ratio
65-68 PASS. 2/3.08, 3.36, 3.55, 3.70
ratio,
65-68 G-10 w/3.36 ratio
65-67 PASS. w/P/Trac. (2.73 ratio).....
60-61 Ser. 10 (1st design)
SNOTE: Used only w/3768516, Case.
61-62 Ser. 10 (2nd design)
63
Ser. 10 w/3.73 ratio
64-68 CORVETTE,
64
G-10 w/3.36 ratio,
65-68 PASS.,
65-68 Ser. 10 w/3.73 ratio (exc. 4/WD),
65-68 G-10,
67-68 Ser. 10, G-20 (exc. 4/WD) ........
65-68 PASS . .........................
67-68 G-10
...........................
SHIM (.010) (Eaton ED 94128-10) .......
9778349
A.R.
.60
...........................
SHIM (.012 thick) (Eaton ED 94128-12) ..
2472358 A.R.
.60
...........................
SHIM (.015) (Eaton ED 94128-15) .......
2472359
A.R.
.60
SHIM (.020) (Eaton ED 94128-20) .......
9777600 A.R.
.95
SHIM (.025) (Eaton ED 94128-25) . .....
9777601
A.R.
.95
SHIM (.030) (Eaton ED 94128-30) .......
9777602
A.R.
.95
...............
SPACER, (.016)
......................
2489183
1
.35
...............
SPACER (.020)
......................
2489184
1
.35
...............
SPACER (.024)
......................
2489185
1
.35
SPACER (.028)
SPACER, (.016)
SPACER, (.020)
SPACER, (.024)
SPACER, (.026)
SPACER (.028)
GUIDE, plate (Eaton ED 92502)
Not interchangeable w/3779939.
GUIDE, plate (Eaton ED 92743) (stamped 2)
GUIDE, plate (Eaton ED 94044) ........
......................
......................
......................
......................
......................
......................
.......
2489186
3888054
3888055
3888056
3888058
3888057
3776936B
1
A.R.
A.R.
A.R.
A.R.
A.R.
4
.35
1.60
1.60
1.60
1.60
1.60
.20
3789939
3830675
4
4
.20
.20
GUIDE, plate (Eaton ED 94228) ........
GUIDE, w/3871310, 3883763,
w/3883763 (Dana 33295)
9778355
4
.39
............
3872495
4
.38
(47/64 dia. x 4' 5/32 O.L.) ...............
3714784
1
1.30
( 51/.O. D. x 5 214 4 O.L.) ..............
3843667
1
1.30
3745314
2
7.80
...............
..............
.............
.............
...........................
5.517 SHAFT, Differential Pinion
38-64 PASS., CORVETTE, G-10 (exc.
P/Trac.) .....................
38-42 COMM.,
46-63 'z TON (exc. P/Trac.),
60-63 Ser. 10 w/P/Trac.,
64-67 Ser. 10, G-10 (exc. P /Trac. 3.36),
64-67 PASS. w/12 bolt ring gear (exc.
P/Trac.),
67
G-20 ...........................
57-60 PASS., CORVETTE w/P/Trac.
(1st design) ..................
(3/4 dia. x 4
25
; O.L.) ................
-1967
5.511-5.517
881
58-59 '/2 TON w/P/Trac.,
60-62 PASS., CORVETTE w/P/Trac.
(2nd design),
60-61 4/WD w/P/Trac. (front axle)......
(3/4 dia. x 4 25/ 2 O.L.-"V" cut)
63-64 PASS. w /P/Trac .
(Dana 30931)
60-68 4/WD,
65-67 Ser. 1 0 w/leaf type springs
(exc. P/Trac.)
frt. axle ( 3/4 dia. x 5 O.L.) (Dana 17878)
61-62 Ser. 20 (2nd design) (exc. D-D,
4/WD),
62
(13/u
63-68 Ser. 20 (exc. D-D)
dia. x 6/,, O.L.)
®NOTE: For 1st design use 3663696, SPIDER.
63-64 CORVETTE w/P/Trac.,
64-68 G-10 w/P/Trac. (3.36 ratio),
65-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio)
(Dana 32266)
64
Ser. 10 w/3.73 ratio (1st design)
(exc. 4/WD)
(Dana 32289)
*NOTE: Use with rough differential case.
65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio),
65-68 G-10 w/P/Trac. (3.36 ratio) ......
(3/ O.D. x 4 5 Y„ O.L.) (Eaton ED 6960)
64-66 Ser. 10 w/P/Trac. (3.73 ratio)
(2nd design) (exc. 4/WD),
64
G-10 (3.73 ratio),
65-66 G-10 w/P/Trac. (3.73, 4.11 ratio),
65
PASS., w/P/Trac. (3.07, 3.31,
3.55, 3.73 ratio),
65
PASS. w/P/Trac. (4.11, 4.56, 4.88
ratio) (8 cyl.),
67
PASS. (8 cyl.) (2.73 ratio),
67
Ser. 10 (4/WD) w/P/Trac. ........
(5164 O.D. x 5/ 6 ) (Dana 33270) .......
65-68 PASS. w/10 bolt ring gear (exc. P/
Trac.),
65-68 G-10 w/3.36 ratio (exc. P/Trac.) ..
P/Trac.)
(5'/ O.L. x'/e O.D.) (Dana 30263)..,.
65-66 Ser. 20 (leaf type springs
w/P/Trac.)
(5/o4 O.L.) (Dana 31041)
68
G-10 w/3.31, 3.73, 4.11 ratio
(exc. P/Trac.),
68
PASS. w/12 bolt ring gear
(exc. P/Trac.),
Ser. 10, G-20(exc. P/Trac.) ......
68
...............
....................
531312
2
6.95
2346846
1
2.05
3843668
1
1.85
3830742
1
2.18
3849913*
1
2.25
9776894
1
2.66
3869308
A.R.
2.27
3931174
1
1.75
2358883•
1
2.25
23923540
2
9.00
3931175
1
1,75
(S4 -18)...........................
(1/, dia. x 2'/ O.L.) (Eaton ED 92317) .
472546
3772612
1
1
.20
.25
......................
3830743
1
.95
(Eaton ED 92994)
3830672
1
.25
(Dana 32845)
2462906
1
.35
................
..............
...............
..............
..................
......................
......................
....................................
....................
..................
............
....................................
5.518 SCREW-PIN, Pinion Shaft Lock
38-42 PASS., COMM.,
46-64 PASS., CORVETTE, '/Z TON (exc.
P/Trac.),
65-67 PASS. (exc. P /Trac.),
65-67 CORVETTE, 1/2 TON (exc.
P/Trac.),
67
G-20
60-62 Ser. 10 w/P/Trac
64
G-10 w /P/Trac. (3.36 ratio)
(1st design)
63-68 Ser. 10 w/P/Trac., (3.73 ratio),
65-68 PASS. w/P/Trac. (12 bolt ring
gear),
65-68 G-10 w/P/Trac. (3.73, 4.11 ratio),
67-68 G-20
64-68 G-10 w/P/Trac. (2nd design),
65-68 PASS. w/P/Trac . ...............
...........................
................
..................
...........................
(Dana 32267)
5.517-5.518
..................
......................
c -1967
882
65-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio),
65-68 G-10 w/P/Trac. (3.36 ratio) , , , . , ,
(Eaton 93465) ......................
64-66 Ser. 10 w/P/Trac. (3.73 ratio)
(exc. 4/WD),
64-66 G-10w/P/Trac. (3.37, 4.11 ratio),
66-67 PASS. w/P/Trac. (2.73 ratio)
(8 cyl.),
67
Ser. 10 (4/WD) w/P/Trac. ........
(Dana 32283) ......................
60-68 4/WD,
65-67 Ser. 10 w/leaf type springs
PIN, front axle (17/6
(exc. P/Trac.) ................
13449) ............................
4/WD),
62
63-68 Ser. 20 (exc. D-D) ............... PIN (/ dia. x
®NOTE: For 1st design use 3663696, SPIDER.
15
/^ O.L.)
..............
3869319
1
.25
3849912
1
.95
2402527
1
.10
3813397e
1
.10
370429
1
5.520 SPIDER, Differential Pinion
38-55 UTILITY (Prod.) (1st Ser.),
67-68 Ser. 30 w/11000 lb. axle
.........
39-46
46-59
57-59
60-61
(forged 3656895)
...................
2-SPD. w/Mech. Shift ...........
(646 0. L.) ......................... 3651425
1
i , 1 TON (exc. 4/WD),
Ser. 3E-3G w/4WD,
Ser. 20 (1st design) (exc.
D-D, 4/WD),
60-68 Ser. 20 (D-D),
60-62 Ser. 20 (4/WD) (1st design),
60-68 Ser. 30 (exc. 11,000 lb. axle),
65-68 Ser. 20 w/4.11 ratio (327),
67-68 Ser. 20 (4/WD) ..................
(forged 3663696) . .................
3663696w 1
®NOTE: For 2nd design use 3843668 SHAFT, Group 5.517 and 3813397 PIN, Group 5.518.
46-52 2-SPD. w/Vac. Shift (1st design) ,
(1"/6 hub hole) (stmp'd. 3278-M-91) ... 3682505
1
52-55 2-SPD. w/Vac. Shift (2nd design)
(1st Ser.)......................
(15/6 hub hole).....................
2295617*
1
*NOTE: Can be used in place of 3682505 but requires proper short length R.H. axle shaft.
55-59 2-SPD. (2nd Ser.) ................
diff. pinion........................
3873573
1
8.25
9.15
8.25
11.85
11.85
10.75
5.526 GEAR, Differential Pinion
38-42
46-63
38-51
52-55
39-42
46-68
COMM.,
'z TON (exc. P/Trac.) ...........
UTIL. (exc. 2-SPD.),
1'z TON (1st Ser.) (exc. 2-SPD.) ..
2-SPD ..........................
PASS., CORVETTE (w/10 bolt
ring gear) (exc. P/Trac.),
64-68 G-10 (w/3.36 ratio) (exc. P/Trac.) .
46-59 'a, 1 TON (exc. 4/WD),
60-67 Ser. 20-30 (exc. P/Trac., 11,000
lb.
axle) .....................
(10 teeth—shaft hole"/6) .............
370225
2
4.05
(11 teeth—shaft hole'/8 ) .............
(9 teeth) (stmp'd. 2234 -K-63)........
370446
3651424
4
4
4.95
5.15
3880142
2
3.85
.............................
....
rear,
57-59 Ser. 3E-3G w/4WD ...............
frt. axle (10 teeth).................. 3681055 A.R.
(9 teeth) (stamped 3683815) .......... 3683815
4
52-55 2 TON (1st Ser.) (exc. 2-SPD.),
67-68 Ser. 30w/11,000 lb. axle .........
(10 teeth—shaft hole 7/)
3697745
4
58-59 `2 TON w/P/Trac.,
63-64 PASS, w/P/Trac.,
P/Trac., 4/WD) ...............
(10 teeth) (dab of orange paint) ....... 2370715' 4
tNOTE: When using 2370715 in place of 3745313, 3744618 side gear must also be used.
60-62 Ser. 10 w/P/Trac ................
(10 teeth_ 13/ 6 shaft hole) (Eaton
ED 40250) ....................... 3772617 2
60-68 4/WD,
(exc. P/Trac.) ................
(10 teeth) front axle (Dana 17717) .... 2346845
2
©-1967
883
4.05
7.05
4.75
3.20
6.45
3.30
5.518-5.526
63-68 Ser. 10 w /P/Trac. (3.73 ratio),
64-68 G-10-20 w/P/Trac. (3.73, 4.11
ratio),
65-68 PASS. w/P/Trac. (12 bolt ring
gear) ........................
64
Ser. 10 (exc. D-D, 4/WD, P/Trac.),
64
Ser. 10 (D-D, 4/WD),
64
G-10 w/4.11 ratio (2900 lb. axle),
64
G-10 w/3.73 ratio (exc. P/Trac.),
65-68 G-10 (exc. 3.36 ratio, P/Trac.),
65-68 Ser. 10 (exc. P/Trac., leaf type
springs),
65-68 Ser. 10 (4/WD) (exc. P/Trac.),
P % Trac. ),
67-68 G-20 ...........................
66
Ser. 10 (exc. P/Trac.),
64-66 Ser. 10 w"P/Trac. (3.73 ratio),
65-66 G-10 w/P/Trac. (3.73, 4.11 ratio),
67
Ser. 10 (4/WD) w/P/Trac. .......
64-68 G-10 w/P/Trac. (3.36 ratio),
64
CORVETTE w/P/Trac.,
65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio) ....................
65-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio),
65-68 G-10 w/P/Trac. (3.36 ratio) ......
65
PASS. w/P/Trac. (2.73, 4.10, 4.56,
4.88 ratio) (8 cyl.),
P'Trac.) .....................
65-67 Ser. 20 w/P/Trac. (leaf type sprgs.)
67-68 Ser. 20-30 (exc. P/Trac. 11,000
lb. axle)
.....................
5.52 7
CORVETTE w/P/Trac...........
Ser. 10 w'P/Trac. (exc. 4/WD),
G-10 w/P /Trac. (3.73, 4.11 ratio)
G-10 w/3.36 ratio (1st design) ....
PASS. w/P/Trac. (3.08, 3.36,
3.55 ratio),
65-66 G-10 w / P/Trac. (3.36 ratio) ......
38-42
46-55
42-46
46-51
40-42
46-63
57-59
46-54
53-55
46-66
67
46-51
52-53
67-68
52-53
54-55
54-55
55-64
56-68
3830670
2
6.25
.........................
3880140
2
3.85
(Dana 32264)
......................
3849909
2
3.35
(Dana 32808)
......................
3854260
2
3.35
..................
9778343
2
6.55
3869306
2
3.10
(10 teeth-shaft hole '/ ") (Dana 30261) 2358882• 2
(10 teeth-1° shaft hole) (Dana 31040). 2392353• 4
3.30
3.60
(10 teeth)
(Eaton ED 40335)
(10 teeth) (2 37/64 O.D. x 1 3/ b I.D.)
(Dana 33268)
....................
(10 teeth)
.........................
3867816
1
3.90
GEAR UNIT, Differential Side w/Pinion
63-64
64-66
64-66
64
65-66
5.528
......................
(Eaton 40343)
......................
(Dana 23488X) .....................
....................................
3867746
1
24.25
2462907
2462908
1
1
19.20
19.20
.....................
2472349
1
21.20
teeth))(4,3 O-D. ).......
((10 spline-18
P
370445
2
8.50
.................
3661874
2
10.25
3652344
2
7.50
3682122
2
6.75
3681056
3682526
2
2
8.35
18.85
(Dana 2375X)
(Dana 23819X)
GEAR, Differential Side
UTILITY,
1'.z TON (1st Ser.) (exc. 2-SPD.)...
M, OR, OS, OW, OY w/H.D.,
2 TON
COMM.,
'/ TON (exc. P/Trac.)
Ser. 3A w/4/WD
PASS.,
CORVETTE
'/_., 1 TON
Ser. 20-30 (1st design) (exc.
P/Trac., 11,000 lb. axle)......
2-SPD. w/Vac. Shift
2 TON (exc. 2-SPD.),
Ser. 30 w/11,000 lb. axle ........
2-SPD. w/Vac. Shift
2 TON (prod.) (1st Ser.)
PASS. (exc. P/Trac.),
CORVETTE (exc. P/Trac.) .......
.........................
...........
.................
....................
......................
(16 spline-18 teeth
rear axle,
front axle (16 teeth)
................
(16 teeth) (stamped GM-R) ...........
rear axle,
................
.............
front axle (18 teeth)
(16 teeth)(stmp'd. 2234-T-202).......
.............
..........
(27 spline-18 teeth)
(27 spline-16 teeth)................
(29 spline) (forged 3602292) .........
(29 spline) (stamped 3703724)........
3697746
3698942
3702292
3703724
2
2
2
2
9.95
19.55
9.95
19.55
...........................
3820638
2
6.90
................
(16 teeth)
5.526-5.528
-1967
884
................
...............
..............
..........................
.............
...........
..............
58-59 '2 TON w/P/Trac
right and left (20 splines)
2370717
2
63-64 PASS. w/P/Trac .
(daub. of orange paint)
3744618- 2
NOTE: When using 3744618 in place 3745317 it may be necessary to use 2370715 pinion gear.
60-62 Ser. 10 w/P/Trac .
(16 teeth-17 splines) (Eaton 40251) , ,
3772616
2
60-68 4 /WD
front axle (16 teeth) (Dana 31487) .... 3779581
2
61-67 Ser. 20-30 w/P/Trac
(17 splines-2 27/32 O.D.) (No Spin) ..... 2426038
2
63-64 Ser. 10 w/P/Trac. (3.73 ratio) ....
(Eaton 40334-1)
3830669
2
64
G-10 w/P/Trac. (3.36 ratio)
(2nd design)
(Dana 32630 )...................... 3848014
2
64
Ser. 10 (exc. D-D, 4/WD, P/Trac.),
64
Ser. 10 (D-D, 4/WD),
64
G-10 w/3.73, 4.11 ratio (exc,
P/Trac.)
(17 splines-16 teeth)
3846424
2
64
Ser. 10 w/P/Trac. (3.73 ratio) ....
(Dana 32282)
3849911
2
64
CORVETTE w/P/Trac...........
(Dana 33205)
3867897
2
G-10 ...........................
64
.................................... 3832415
2
64-68 CORVETTE w/P/Trac. .........
(Eaton ED 40334-6)
3869317
2
65-66 STA. WAG. (exc. P/Trac.),
65-68 PASS. w /12 bolt ring gear
(exc. P/Trac.),
65-68 Ser. 10, G-10-20 (exc. P/Trac.) ...
(30 splines-16 teeth)
3846078
2
65-68 PASS. w/P/Trac. (3.08, 3.36,
3.55, 3.70 ratio),
65-68 G-10 W/P/Trac. (3.36 ratio) ......
(Dana 33243) (28 splines-16 teeth) ... 2472350
2
65-68 G-10,
65-68 PASS. w/10 bolt ring gear
(exc. P/Trac.)
(28 splines-16 teeth)............... 3863725
1
65-68 PASS. w/3.07, 3.31, 3.55,
3.73 ratio,
65-68 PASS. (8 cyl.) w/4.10, 4.56, 4.88
ratio,
....................
..................
.....................
......................
4.00
10.30
7.30
16.65
8.75
7.50
...............
......................
......................
.................
7.25
7.50
7.25
6.40
8.15
...............
6.90
...............
65-68 G-10-20 w/P/Trac. (3/73 ratio),
(interior spline 30 exterior spline)
65-68 Ser. 10 w'P%Trac. (3.73 ratio) ....
65-67 Ser. 10 w/P/Trac. (3.73 ratio)
(exc. 4;'WD),
65-67 G-10 w%PiTrac. (3.73, 4.11 ratio)
65
PASS. w/P/Trac., (3.07, 3.31,
3.55, 3.73, 4.10, 4.56, 4.88 ratio)
(1st design),
66-67 PASS. w/P/Trac. (2.73 ratio)
(8 cyl.)
65-68 PASS. w/P/Trac. (3.08, 3.36, 3.55,
3.70 ratio) (10 bolt ring gear) ...
65-68 G-10 P/Trac. (3.36 ratio) ........
65-66 Ser. 20 (leaf type springs w/4.10,
4.56 ratio) (exc. P/Trac.) , , , , , ,
67-68
Ser. 20-30 (2nd design) (exc.
PTrac., 11,000 lb. axle).......
4.00
8.50
6.50
(23-18 teeth) (Eaton ED 40334-7) .....
2472352
2
8.40
(30'splines-16 teeth) (Dana 33228) ...
2472355
2
8.50
(30 splines-16 teeth) (Dana 33267) ...
3869305
2
13.80
(interior spline 28-exterior spline 2318 teeth) (ED 40334-5)
3869344
2
8.15
(30 splines-15 teeth) (Dana 31493) ,
2402600•
2
7.80
3867815
2
6.95
..............
(18 teeth)
.........................
5.529 GEAR ASSEMBLY, Ring and Pinion (not sold separately)
NOTE: Part numbers in parentheses are stamped on ring gear and pinion respectively.
PASSENGER CAR
40-52 (exc. P.G.) .....................
40-52 (exc. P.O.),
53
SDL ...........................
50-54 w P.G . ........................
53-54 (exc. P.G.) .....................
55-56 (exc. P.G., O.D.) ................
55-56 w/P.G . ........................
55-59 w/O. D.,
62-64 v!4.11 ratio ....................
( 41 - 1 1 T )(595022-3652285)...........
604397
1
38.65
(37-9T) (3652178-3704417)...........
(3 9 -11T)(3691464-3704411)..........
(37-10 T )(3697720-3703799)..........
(3 7 -10 T ) (3725864-3733910)..........
( 32 - 9T )(3731604-3731617)...........
3705430
3705262
3705261
3748433
3748430
1
1
1
1
1
49.95
44.00
44.00
49.25
46.95
( 37 -9 T )(3733908-3733912)...........
3748434§
1
49.25
-1967
885
5.528 -5.529
57-58 w/A.T.,
59
A.T. (exc. 348),
59
3-SPD. (348) (exc. H.L.
Cam, H/Per.),
60-61 3-SPD., P.G., (6 cyl.),
60-61 (P.G. w/C.A.C., Cool Pack (283),
60.61 3-SPD., T.G. (283),
62-64 w/3.36 ratio
(37-11T)(3735390-3736508)............ 3748437
59-61 w/O.D.,
60 . 61 w,'4 .8PD. (348),
60-61 3-SPD. w/H/Per. (348),
62-64 3.70 ratio
(37-10T)(3737957-3733910).......... 3748438 ®
eNOTE: When used with P/Trac., required P/Trac. differential unit 3853550 (group 5.510),
62-64 4.56 Ratio ......................
(41-9T)(3720089-90)................ 3748447(
57-58 exc. O.D., A.T.,
59
4-SPD. (348) (exc. H.L. Cam),
59-60 w/3-SPD.,
59-61 P.G. w/H.L. Cam, H/Per. (348),
61
STA. WAG. (3-SPD. w/P/Trac.)
(6 cyl.),
61
STA. WAG. (P/Trac. w/H/Per.)
(348),
STA. WAG. w!355,
62
63-64 w/3.55 Ratio
(32-9T)(3783188-3783189)........... 3795479
59-61 w/A.T. (348) (exc. H.L. Cam),
60-61 P.G. (exc. C.A.C.),
w/4-SPD.,
61
62-64 3.08 Ratio ......................
(37-12)(3756448-3756446)........... 3758549
62-63 4.88 Ratio
(39-8T) (Used to convert from 3.08,
3.36, 3.70 ratios) ................. 3830261
62-63 4.88 Ratio
4.56 ratios) ...................... 3830264
62-63 5.13 Ratio
3.36 and 3.70 ratios)
3830269
62-63 5.13 Ratio
(41-8T) (Used to convert from 4.11
and 4.56 ratios)
3830266
62-63 5.38 Ratio
3.35, 3.70 ratios) ................. 38302 71
62-63 5.38 Ratio
(43-8T) (Used to convert from 4.11
and 4.56 ratios) .................. 3830274
65
3.36 ratio (1st design)
(37-11T)(3790628-3830428)......... 3846193
65-68 4.88 Ratio w/12 bolt ring gear ....
(39-8T) (3862528-3862516)
3865967
(43-13T) (3862689-3862693) ......... 3865994
(39-11T) (3853010-3853008) ......... 3865995
(39-11T) (3880046-3790627) ......... 3886356
(43-14T) (3862691-3853003) ......... 3865996
(41-11T) (3862525-3862513) ........ 3865997
....................
1
49.25
......................
1
49.25
1
49.25
1
49.25
1
49.25
1
70.30
1
70.30
1
70.30
1
70.30
1
70.30
1
1
1
1
1
1
1
1
70.30
46.15
49.25
52.75
44.85
46.95
52.75
...................
.....................
.....................
......................
......................
......................
......................
...........
65-68 4.10 Ratio w/12 bolt ring gear ...
65
3.70 Ratio w/1 0 bolt ring gear
(1st design)
65
2.73 Ratio w/12 bolt ring gear ...
65-68 3.36 Ratio w/10 bolt ring gear
(2nd design)
65-67 3.70 Ratio w/10 bolt ring gear
(2nd design)
68
2.29 Ratio w/12 bolt ring gear ... .
..................
..................
..................
..............
..................
..........
(41-10T)(3862526-3862514).........
(41-9T)(3862527-3862515)..........
(37-12T) (3880042-3790629) .........
3865998
3865999
3886358
1
1
1
55.45
49.25
44.85
(37-10T)(3849722-3849719).........
(41-15T) ..........................
3852337
3875267
1
1
44.85
48.40
(37-11T)(3880044-3790628).........
3886357
1
44.85
(37-10T)(3880048-3849722).........
...........................I......
3886359
3933963
1
1
44.85
3748436
3748433
3748430
3748434(
3748438®
1
1
1
1
1
46.95
49.25
49.75
49.25
k*
3748447(
1
3795479
1
CORVETTE
53-55
56
56
57-62
57-62
3.55 Ratio ......................
(39-11T)(3691464-3704479).........
w/3-SP D . ......................
(37-10T)(3735864-3733910) .........
W/P,G . ........................
(32-9T)(3731604-3731617)..........
4.11 Ratio ......................
(37-9T)(3733908-3733912)...........
3.70 Ratio ......................
(37-10T)(3737957-3733910).........
®NOTE: When use w/P/Trac., requires P/Trac. differential unit 3853550
(group 5.510).
57-62 4.56 Ratio ......................
(41-9T) (3720089-90)...............
57-61 w/P.G.,
62
3.55 Ratio......................
(32-9T) (3783188-3783189).........
5.529
886
**
-1967
62
62
63-64
63-64
63-64
63-64
63-64
63-64
65-68
65-68
65-68
65-68
65-68
65-68
68
......................
......................
......................
......................
......................
......................
......................
......................
......................
......................
......................
......................
............
3.36 Ratio
(37-11T)(3735390-3736508)..........
3.08 Ratio
(37-12T)(3756448-3756446).........
4.11 Ratio
(37-9T)(3733908-3820896)...........
3.36 Ratio
(37-1 IT)(3735390-3819186),........
3.55 Ratio
(32-9T)(3783188-3820899)..........
3.08 Ratio ......................
(37-12T)(3756448-3819184).....,.,.
4.55 Ratio
(41-9T)(3720089-3820897)..........
3.70 Ratio
(37-10T)(3737957-3819081)..........
3.36 Ratio
(37-11T)(3735390-3885942).........
4.56 Ratio
(41-9T)(3894568-3894566)..........
4.11 Ratio
(37-9T)(3733908-3885945)..........
3.70 Ratio
(37-10T)(3737957-3885944).........
3.55 Ratio
(32-9T)(3783188-3885943)...........
3.08 Ratio ......................
(37-12T)(3772134-3885951).........
2.73 Ratio (P/Trac.)
(41-15T)(3924344-3924343).........
§ NOTE: When used with P/Trac. requires P/Trac. differential unit 3853552
(group 5.510).
3748437
3758549
3822988
3822989
3822990
3822991
3822992
3822993
3887839
3896576
3887837
3887835
3887836
3887834
3933096
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
49.25
**
49.25
46.95
46.95
46.95
46.95
49.25
53.50
46.15
53.70
44.85
48.90
46.15
48.50
TRUCK
39-42
40-53
40
41-55
67
40
41-55
67-68
46-60
57-59
46-59
60
60
57-59
46-55
54
54-55
55-59
60-62
63
57-59
55-59
55-57
60-62
58-59
58-59
58-62
60-63
VF, WD, Y, M w/2-SPD...........
i 2 TON
WD,
1'/2 TON (1st Ser.),
Ser. 30 (D-D) (DIESEL) w/11000
lb. axle
WD,
UTILITY (1st Ser.),
Ser. 30 w /11,000 lb. axle .........
3
-, TON (exc. D-D)
Ser. 3E w4/WD
D-D, 1 TON,
Ser. 20 (D-D),
Ser. 30
Ser. 3G w, 1 4!WD
2-SPD. w/Vac. Shift (lo ratio)
(1st Ser.) .....................
lz TON
2-SPD. w/Vac. Shift (hi ratio)
(1st Ser.) .....................
'./2 TON (exc. O/D, P/Trac),
Ser. 10,
Ser. 10 (4WD) (1st Ser.) .........
Ser. 3A w/4/WD
2-SPD. (2nd Ser.)
'/Z TON w/O/D (2nd Ser.),
Ser. 10 w/4.11 ratio .............
!? TON .........................
'2 TON w/P/Trac,, , , , , , , , , ,,, , , ,
12
TON (exc. 4/WD) ..............
Ser. 10 (4/WD) (1st Ser.) , , , , , . , , .
.........................
(19-8T) (3889M117-3890L-222)......
(37-9T_hypoid)(3652510-3704661)....
603771
3705439
1
1
67.30
53.75
......................
(38-7T-hypoid)(3652282-3652547)...
2352908
1
74.00
...............
.................
(37-6T-hypoid) (3652522-3552549) ...
rear axle,
front axle (32-7T hypoid) (3682104-03)
604427
1
74.00
609797
1
56.50
.........................
.................
rear axle,
front axle (36-7T-hypoid) (3682146-45)
609798
1
59.50
.........................
(23-8T) (3889M221-3890C-289).......
(39-10T-hypoid)(3697702-03)........
2440755•
3707516
1
1
87.00
52.50
(22-7T)(3889R252-38905-331)........
3707547
1
95.25
(3.90 ratio) (39-10T-hypoid)
(3697702-3740897), front axle ......
(32-5T-hypoid) (3702244-3711483)...
3747808
3717213
1
1
59.75
99.00
3747809
3749020
2354371
3764960
1
1
1
1
57.75
57.75
49.75
54.75
2402513
1
49.75
2403655
1
49.75
(32-7T-hypoid)(3768612-3766683) ....
3785597
1
61.50
(36-7T-hypoid)(3768613-3766684)....
(35.-6T) (3820880-382 0882) ..........
3785598
3825110
1
1
61.50
56.60
(41-11T-hypoid) (3817778-3817775) ..
3824445
1
49.75
(43-14T-hypoid) (3817779-3817776) ..
3824446
1
49.75
(37-9T-hypoid)(3819037-3819038)....
3824447
1
49.75
front axle (41-11T).................
3831912
1
53.00
(37-9T-_.ypoid)(3838365-3838369)....
(37-11T-hypoid) (3790628-3832408)
3844318
3846193
1
1
69.00
**
.................
................
60-68 Ser. 20 (4/WD) w/4.56 ratio.......
61-64
65-68
61-64
61-68
62-63
63-64
63-64
63-64
63-64
63-68
63-68
64-65
Ser. 20 w/4.57 ratio (exc. D-D),
Ser. 20-30 w/4.57 ratio ..........
Ser. 20 (D-D),
Ser. 30 w/5.14 ratio .............
Ser. 30 (D-D) ..................
Ser. 10, G-10 w/3.73 ratio
(exc. 4 /WD),
Ser. 10 (4/WD) w/3.73 ratio
(2nd Ser.) ....................
Ser. 10 w/3.07 ratio
(exc. D-D, w/WD) .............
Ser. 10, G10 w/4.11 ratio (exc.
4/WD) .......................
Ser. 10 (4WD) (2nd Ser.)
(3.73 ratio) ..................
Ser. 20-30 w/4.11 ratio (exc.
4 WD, D-D) ...................
G-10 w/3.36 ratio (1st design).....
,c -1967
(37-9T-hypoid) (3652510-3740875) ...
(37-10T-hypoid) (3711420-3744091) ..
(47-12T-hypoid) (2354373-2354374) ..
(13-44T-hypoid) (3763461-3763466) ..
frt. axle (47-12T-hypoid) (Spicer
18445-31488) ....................
frt. axle (50-11T-hypoid) (Spicer
18679-31491) ............... ......
5.529
887
65-67 Ser. 10 w/3.07 ratio (exc
D-D R %WD )
(43-14T—hypoid) (3817779-3864624) , .
65-66 Ser. 10w -'leaf type springs .......
(3.54:1 ratio)
65-66 Ser. 20 ;/leaf type springs .......
(4.10:1 ratio)
65-66 Ser. 20w leaf type springs .......
(41-9T) (4.56:1 ratio)
65-67 G-10 w % 3.36ratio (2nd design)....
(37-11T)(3880044-3790628).........
65-68 Ser. 10, G-10-20 w/4-11 ratio
(exc. 4 WD)
(37-9T—hypoid)(3819037-3884937),,,,
65-68 Ser. 10, G-10-20 w/3.73 ratio .....
(41-11T—hypoid)(3817778-3884935)...
NOTE: Axle Ratio = Ring gear . Pinion; 37 . 10 = 3.70 to 1.
""NOTE: Indicates repeated number, see first listing for price.
................ . ..
.....................
......................
..............
..................
3887832
2428707s
2376269•
23588460
3886357
1
1
1
1
1
48.90
49.75
59.75
59.75
**
3887833
3887831
1
1
49.25
53.30
5.531 SCREW—BOLT—KEY, Ring Gear
38-52
53
55-64
56-68
63-68
63-68
64-68
65-68
50-52
53
53-55
54
40-42
46-62
63
40-55
46-50
60-68
46-55
PASS. (exc. P.G.),
SDL.,
PASS.,
CORVETTE,
Ser. 10 (4WD) (2nd Ser.),
G-10-20,
PASS .
PASS. w/ P.G.,
PASS. (exc. SDL.),
CORVETTE,
PASS
COMM.,
',z TON (exc. 1958 '/2 TON
w/P/Trac.),
Ser. 10 (4/WD) (1st Ser.) .........
UTILITY (1st Ser.),
',, 1 TON,
Ser. 20-30
2-SPD. w 'Vac. Shift (1st Ser.) ....
.........................
('8-24 x 25 /32 ) (used with lockwasher) ..
3884942
A.R.
.10
..........................
( %-24 x "/ 6 ) (stmp'd 55 T" on head) ...
3691466
10
.10
..................
3697704
12
.10
....................
3884943
12
.15
......................
58-59 'i TON w/P/Trac
...............
60-68 4, WD,
(P / Trac.) ...................
65-66 Ser, 20 w/leaf type springs ......
5.533
BOLT ('/z-20 x 2)
BOLT, gears to case attach.
(9,16 -18 x 5) ......................
BOLT, gears to case attach.
x 27/
('/,6 -20
3x) ......................
3682520
8
.95
2346842
10
.15
BOLT, frt. axle, gear to case
( /-24 x "// a) ......................
BOLT (Dana 30266)
KEY
2402525 10
2358877• 12
3682541
1
.15
.18
1.10
..................
................................
PAD—SCREW—NUT, Ring Gear
46-60 3 ;, 1 TON,
Ser. 3A w 4/WD,
59
67-68 Ser. 30 w/11,000 lb. axle.........
46-60 -,, 1 TON,
67-68 Ser. 30 w'l1,000 lb. axle .........
46-60 ';, 1 TON ......................
5.535
BOLT ('/e-24 x 31, )
thrust
.............................
370463
1
.50
x 3'/4 ) ........
3652255
1
.70
NUT, thrust pad screw (/e-14) .........
124954
SCREW, thrust pad (
7
/8 - 14
1 (8.916)
LUBRICANT, Hypoid Gear
ALL
PASS., CORVETTE, ?i TON
w'P,'Trac . ...................
specialhypoid (1 quart container) ....
ALL PASS., CORVETTE, 12 TON
w/P/Trac . ...................
special hypoid (15 gal.).............
TON
w/P/Trac . ...................
specialhypoid (1 quart).............
65-67 PASS., CORVETTE, ? TON
w 'P /Trac . ...................
special hypoid (15 gal.) .............
"NOTE; To be used on models thru 1964.
5.529-5.535
888
1050015* A.R.(8.800)
1050016* A.R.(8.800)
1050081
1
(8.800)
1050527
1
(8.800)
4-1967
5.536
BEARING-RACE, Differential Side
38-54 PASS. (exc. FA, FD),
53-55 CORVETTE ...................
(Hyatt A 11360) (Hy 11360 Z) ...... , ,
*NOTE: Must be installed in sets of two on 1939-40 models.
38-53 UTILITY,
54-55 1'.? TON (exc. 2-SPD.) (1st Ser.),
67-68 Ser. 30 w/11000 lb. axle .........
(Hyatt A 11820) (Hy 11820 Z)........
NOTE: Must be installed as an assembly and in sets of two on 1938-39 models.
40-42 COMM.,
46-56 'z TON,
55-56 PASS.,
56
CORVETTE ....................
(Hyatt CK 11445 X) ............... .
57-59 Ser. 3Aw'4/WD ................
front axle,
57-59 PASS., CORVETTE, '/ TON (exc,
', TON w/P/Trac.),
60-62 PASS., CORVETTE, '/z TON,
63-64 PASS.,
Ser. 10 (4/WD) (1st Ser.) , , , . , , , , ,
63
(Hyatt A 159286 Z) .................
46-68 '-a, 1 TON (exc. 11,000 lb. axle) ...
(Hyatt D 11786) (Hy 11786 Y),
57-59 Ser. 3E-3G w/4/WD.. ............
front axle .........................
54-55 2 TON (prod.) (1st Ser.)..........
(Hyatt KC 11948Y) .................
63-68 CORVETTE, Ser. 10,
63-68 G-10-20 w/3.73, 4.11 ratio,
....................................
58
'2 TON w /P/Trac
rear,
64-68 4/WD ..........................
front (Bower 25590-25523) ...........
60-63 4/WD ..........................
w/roller (1"/ 6 I.D. x 3"/64 O.D.)
(Timken 25577-25523) .............
63-68 CORVETTE ....................
"U" joint yoke ....................
65-66 Ser. 20 w/leaf type springs......
w/roller (Timken 387A-382S).........
64-67 G-10 w/3.36 ratio,
65-67 PASS. w/ 10 bolt ring gear .......
(1/, x 2 57/64 O.D.) ....................
groups 6.311, 6.313............
x 25/32 thk.) ......
(25/32 I.D. x 314
group 6.313 ................... ....................................
39-55 2-SPD. (1st Ser.) ................ RACE, outer (Timken M 3920) .........
46-55 2-SPD. w/Vac. Shift (1st Ser.) .... RACE, inner, w/roller (Timken X 3994)
58-59 'ii TON w/P/Trac.,
60-64 4/WD .......................... RACE, outer (Timken 25523) ..........
58
%i TON w /P/Trac.,
4/WD ..........................
64
RACE, inner w/roller (Timken 25590) ..
60-63 4/WD .......................... RACE, inner w/roller (Timken 25577) ...
63-64 CORVETTE,
63-64 Ser. 10,
64
G-10 w/3.73, 4.11 ratio .......... RACE, outer .........................
64
G-10 w/3.36 ratio ............... RACE, outer.........................
5.537
38-42
46-59
55-59
56-59
60-62
63-64
63
38-53
54-55
67-68
38-54
53-55
39-55
46-59
60-68
54.55
58-59
60-63
NUT -SHIM-SHIM
127861*
2
8.65
1483997
2
14.35
7450385
2
9.85
7450745
2
5.95
188930
7450326
2
2
10.66
20.57
7451140
2
5.95
9412262
2
6.50
9415224
4551-24
9412411
2
2
2
6.40
1.50
8.37
7451281
2
5.24
7451090
5.74
7451226
457319
435973
2
2
5.10
4.30
7.98
9412267
2
2.46
9412266
9415225
2
2
3.94
3.96
7451141
7451282
2
1
2.13
1.98
3707303
2
80
...............
357665
2
1.30
(3344 O.D. x /4 thick-12 slots) ........
(3'/B I.D.) ..........................
3707301
678416
2
2
80
2.30
(361/64 O.D.) 13........................
(2Y, I.D. x 4 /32 O.D._14 slots) .......
3664527
3702289
2
2
1.35
1.95
SHIM (.003) ..........................
1784579
A.R.
.12
UNIT-SPACER, Differential Bearing Adjusting
COMM.,
',i TON (exc. P/Trac.),
PASS.,
CORVETTE,
PASS., CORVETTE, Y= TON
PASS.,
Ser. 10 (4/WD) (1st Ser.) .........
UTILITY,
1'/ TON (1st Ser.) (exc. 2-SPD.),
Ser. 30 w/11000 lb. axle ........
PASS.,
CORVETTE ...................
2-SPD. (1st Ser.) . . . . . . . . . . . . . . . .
',', 1 TON,
Ser. 20-30 (exc. 11000 lb. axle) ...
2 TON (prod.) (1st Ser.) .........
'z TON w/P/Trac.,
4/WD ..........................
(315,6 O.D. x 25/32 thick-12 slots) .....
(41/
O.D.) (20/
3
i-1967
5.536-5.537
889
58-59 1 2 TON w/P/Trac.,
60-63 4 'WD ..........................
64-68 4/ WD.
65-67 Ser. 10 w/leaf type sp ri ngs,,,,,,,
64-68 4 -" WD,
SHIM (.005) ..........................
1784580
A.R.
.12
SHIM (.003) ..........................
2457068
A.R.
.10
64-68 4WD,
65-67 Ser. 16 w 'leaf type springs.......
64-68 4 \VD,
65-67 Ser. 10 w ,leaf type springs.......
65
CORVETTE,
SHIM (.005) ..........................
2457069 A.R.
.10
SHIM (.010) ..........................
2457070
A.R.
.10
SHIM (.030) ..........................
2457071
A.R.
.10
65
SHIM (.078) ..........................
3820423
A.R.
.15
2358873S A.R.
.10
SHIM (.003) (2 1 51 6 O.D. x 2 11/ 2 I.D.)
( Dana 30276-1) ....................
SHIM (.005) (2 15 / 6 O.D. x 2 11/32 I. D.)
23588740 A.R.
.10
65-66 Ser, 20 w/leaf type springs .......
SHIM (.010) (2 15/ 6 O.D. x 2 M/32 I.D.)
23588750 AR.
.10
65-66 Ser. 20 w"leaf type springs .......
SHIM (.030) (2 1 /, 6 O.D. x 2 1 1/ 2 I.D.)
(Dana 30276-4) ....................
2358876• A.R.
.10
SHIM UNIT (.064, .066, .068) ..........
3851480
A.R.
.85
SHIM UNIT (.070, .072, .074) ..........
3851481
A.R.
.75
SHIM UNIT (.076, .078, .080) ..........
3851482
A.R.
.85
SHIM UNIT, .082, .084, .086) ..........
3851483
A.R.
.75
SHIM UNIT (.088, .090, .092, .094) .....
3851484
A.R.
.85
SHIM UNIT (.064, .066, .068, .070) .....
3853759
A.R.
.75
SHIM UNIT (.072, .074, .076, .078) .....
3853760
A.R.
.75
SHIM UNIT (.080, .082, .084, .086) ....
3853761
A.R.
.75
SHIM UNIT (.088, .090, .092, .094) .....
3853762
A.R.
.80
65-68 PASS. (w '10 bolt ring gear) .......
65-68 PASS., CORVETTE (w/12 bolt
ring gear),
65-68 Ser. 10, G-10, G-20 (w12 bolt
SHIM UNIT (.096, .098, .100) ..........
3853912
A.R.
.75
gear) ....................
SHIM UNIT (.096, .100) ...............
3876174
A.R.
.75
SHIM UNIT (.052, .056) ...............
3907088
A.R.
.85
SHIM UNIT (.058, .062) ...............
3907089
A.R.
.85
SPACER, diff. bearing
...............
3902522
A.R.
.75
SPACER, diff. bearing ................
9775809
A.R.
.47
472539
2
.10
345672
3702249
2
2
.10
.10
3705726
2
. 10
3652345
4
.10
PASS. w/4 arm suspension .......
65-66 Ser, 20 w/leaf type springs .......
( Dana 30276-2) .....................
(Dana 30276-3) .....................
63-68
65-68
63-68
65-68
63-68
65-68
63-68
65-68
63-68
65-68
CORVETTE, Ser. 10,
PASS., G-10-20 w/12 bolt ring gear
CORVETTE, Ser. 10,
CORVETTE, Ser. 10,
CORVETTE, Ser. 10,
CORVETTE, Ser. 10,
PASS., G-10-20 w'12 bolt ring gear
64-68 G-10 w 3.36 ratio,
65-68 PASS. (w '10 bolt ring gear) .......
64-68
G-10 w 3.36 ratio,
65-68 PASS. (w '10 bolt ring) ...........
64-68 G-10 w ' 3.36 ratio,
65-68 PASS. (w/10 bolt ring gear) ......
64-68
G-10 w 3.36 ratio,
65-68 PASS. (w/10 bolt ring gear) ......
64-68
ring
67-68
67-68
67-68
67-68
67-68
67-68
67-68
67-68
%
G-10 w
G-10 w 3.36 ratio,
PASS. w /10 bolt ring gear ........
G-10 w'3.36 ratio,
PASS. w,/ 10 bolt ring gear ........
PASS., CORVETTE, Ser, 10,
G-10-20 w/12 bolt ring gear.......
PASS.,
G-10 w 3.36 ratio (10 bolt ring gear)
5.539
38-54
53-55
38-53
46-68
46-55
54-55
55-62
55-62
63
63-64
39-55
3.36 ratio,
LOCK-BOLT, Differential Bearing Adjusting Nut
PASS.,
CORVETTE ....................
UTILITY,
' 1 TON (exc. 2-SPD.),
1'; TON (let Ser.) (exc. 2-SPD.)...
2 TON (prod.) (1st Ser.) .........
PASS., '/z TON,
CORVETTE,
Ser. 10 (4/WD) (1st Ser.),
PASS..........................
2-SPD. (1st Ser.) ................
( 2 %6 4dia. hole) .....................
(214
dia. hole) .....................
(1/8 wide x 4°/ b long-curved).........
dia. hole)
(
BOLT, adjusting nut lock ( 5 ; 6 -18 x'/ 6 ) ,
^3x
).....................
5.537-5.539 A-1967
890
5.542
WASHER, Differential Pinion Thrust
2-SPD. (1st Ser.) ...............
2 TON (1st Ser.) (exc. 2-SPD.),
Ser. 30 w ' 11000 lb, axle .........
4 WD,
CORVETTE w/P/Trac.,
G-10 w/P/Trac., 3.55 ratio,
PASS. w/P/Trac., 3.08, 3.36,
3.55, 3.70 ratio,
65-68 G-10 w/P/Trac., 3.36 ratio,
(exc. P/Trac.) ................
Ser. 10 w/P/Trac ................
62
63-64 Ser. 10, G-10 w/P/Trac., 3.73
ratio,
65-68 PASS. w/3.07, 3.31, 3.55, 3.73,
4.10, 4.56, 4.88,
65-68 Ser. 10 w/P/Trac., 3.73 ratio,
65-68 G-10-20 w/PjTrac., 3.73, 4.11 ratio
64-66 Ser. 10, G-10 w/P,/rrac., 3.73 ratio,
67
Ser. 10 (4/WD) w/P%Trac. ........
64
CORVETTE, G-10 (exc. P/Trac.),
65
CORVETTE (exc. P/Trac.),
65
G-10 w/3.36 ratio (exc. P/Trac),
65
PASS. w/10 bolt ring gear (exc.
P'Trac.) ....................
64-65 Ser. 10 (D-D, 4/WD) (2nd design),
4/WD, P/Trac.),
64-65 G-10 w/373, 4.11 ratio (2nd
design) (exc. P/Trac.),
65
PASS. w/12 bolt ring gear (exc.
P/Trac.) .....................
65-66 PASS. w/P/Trac., 3.07, 3.31,
3.55, 3.73 ratio,
65-67 PASS. (P/Trac., w/2.73, 4.10,
4.56, 4.88 ratio) (8 cyl.)........
65-68 PASS. w,'P!Trac., 3.08, 3.36,
3.55, 3.70 ratio,
65-68 G-10 w/P/Trac., 3.36 ratio .......
65-66 Ser. 20 (leaf type springs w/4.10,
4.56 ratio) (exc. P/Trac.) .....
66-68 Ser. 10 (exc. P/Trac.),
66-68 G-10-20 w/3.73, 4.11 ratio
(exc. P!Trac. ),
66-68 PASS. w '12 bolt ring gear
(exc. P/Trac.) ................
66-68 G-10-20 w/3.36 ratio (exc.
P /Trac. ),
P'Trac.) .....................
39-55
52-55
67-68
60-68
63-64
64
65-68
(7/9 I.D. x 1 /32O
.D.) ................
3682522
4
.45
(7/9 I. D. x 1 3hi3 O.D.) ................
2
3697743
4
.40
x 1 '/ 2 O.D.) (front axle on
4/WD) (Dana 1 3338-3).............
13
( "/6 I. D. x 1 / 6 O.D.) (dished) .......
2346848
3828789
2
2
.15
.95
(1"/,, O.D. x 1 3
(Eaton 92995) ..
3830673
2
.95
I.D.) (Dana 32265) ...
3849910
2
.51
................
3843266
2
.35
I.D. x 1 5 4 4 O.D.) ...............
3852991
2
.25
(12732 O.D. x 53/64 I.D.) (Dana 33269) ...
3869307
2
.35
(Eaton ED 92888) ..................
9778352
2
95
(127/2 O.D. x 57/64 I.D.) (Dana 30265) ...
2358884• 2
15
....................................
3880141
2
25
....................................
3880143
2
25
(2/32 I.D. x 49 O.D.) .................
(24 I. D. x 3 /,9 O.D.) ................
078988
3682527
2
2
.56
.70
....................................
(2Yz I.D. x 3 9/ 6 O . D .) ................
3697744
2099520
2
2
.75
.50
....................................
3748258
2
.20
front axle (2 / 6 O.D. x 1 4944 I. D.)
(Dana 17877) ....................
2346849
2
.30
....................................
3846425
2
.25
2
(g944 I.D.
(123/32 O.D. x'
(1 %4 O.D.
( "/a4
x
3
6
/44
3
I.D.)
/4 I. D.)
5.543 WASHER, Differential Side Gear Thrust
39-46
46-53
52-55
67-68
54-55
57-68
60-67
65-67
64-68
65-68
2-SPD. w/Mech. Shift ........... ,
2-SPD. w/Vac. Shift ............
2 TON (1st Ser.) (exc. 2-SPD.),
Ser. 30 w'11000lb. axle .........
PASS., CORVETTE, G-10 w/10
boltring gear, (exc. P;Trac.) ...
4/WD,
Ser. 10 w/leaf type springs
(exc. P/Trac.) ................
G-10-20, Ser. 10 (exc. P/Trac.),
PASS. w/12 bolt ring gear ........
-1967
13
5.5.42-5.543
891
65-66 Ser. (leaf type springs w/4.10,
4.56 ratio) (exc. P/Trac. ......
68
4 ED
..........................
5.545 FL
41-53
41-53
41-65
46-55
57-69
54-55
54-55
55-59
A
(3'/a O.D. x 2% I.D.) (Dana 30264) ....
front axle ( 2 13/ 6 x 1 /e4 I.D.)
(Dana 32132)
2358885• 2
.30
2236254
2
.45
1
15.45
1
1
1
10.95
10.95
16.70
........................
1
5.95
........................
1
8.90
1
10.35
1
1
5.40
11.75
1
1
1
5.95
10.95
5.85
1
.40
1
.42
0
15
1
22
1
.25
2
.63
1
.40
1
.37
1
.40
1
.30
1
.40
1
1
30
20
1
40
....................
NGE— DEFLECTOR—SPACER—WASHER—SLINGER, Propeller Shaft Pinion
..........................
2-SPD
w/deflector (stamped 3897-X-336)....
3657342
UTILITY (exc. 2-SPD.),
',, 1 TON , , , , , , , , , , , , , , , , , , , , , ,
w/deflector (forged 3657003) (2nd
UTILITY (prod.) (1st Ser.). , , , , , , ,
type on DR, DS),
Ser. 3E-3G w'4,WD
front axle
3663176
2 TON (1st Ser.) (exc. 2-SPD.) ....
w/deflector (forged 3703715) ......... 3703716
2-SPD. (1st Ser.)
w/deflector (forged 3703733)......... 3703734
PASS., '2 TON (exc. % TON
w'P'Trac.),
57-59 CORVETTE,
60-64 PASS., CORVETTE, ',2 TON, G-10
w/deflector
3741822*
*NOTE: On all models from 1954-1962, and 1963-1964 pass. it is necessary to replace
3714788 Deflector with 3819415 Deflector.
58-59 '2 TON w,'P%Trac
w/deflector
3817647
60-65 4 'WD,
65-66 Ser. 10 w 'leaf type springs .......
w/deflector (Dana 2-4-2281) .. , ...... 2403641
64-68 G-10 w 3.36 ratio,
65-68 PASS. w 10 bolt ring gear ........
w/deflector
3878968
65-66 Ser. 20 w 'leaf type springs......
w/deflector (Dana 3-4-4181X)........ 2436467•
65-68 Ser. 10, CORVETTE w'12 bolt ring
gear,
65-68 G-10-20 w'12 bolt ring gear,
65-68 PASS. w 12 bolt ring gear , , , , , , , ,
w /deflector (3 2 7/ 2dia.) , , , , , , , , , , , , , , 3878972
66-68 Ser. 20-30 w : 11,000lb. axle ......
w/deflector
3880670
66-68 PASS. w!T.H . ..................
w/deflector (4 5 -; 4dia.)............... 3879208
41-55 UTILITY (1st Ser.) (exc. 2-SPD.),
46-63 'a, 1 TON
DEFLECTOR (2/a I.D. x4 2 1/ 4 O.D.).,,,,
3663162
55-59 PASS., ' 4 TON (exc. 1/2 TON
w!P/Trac. ),
56-59 CORVETTE,
60-62 PASS., CORVETTE, 4 TON,
63-64 PASS.,
63
Ser. 10 (4,/WD) (1st Ser.) , , , , , , , , ,
DEFLECTOR (1'/8 I.D. x 3'/2 0.D.). , , , , , , 3714788
58-59 '2 TON w/ P; Trac,,
DEFLECTOR, pinion flange (front on
60-63 4/ED ..........................
4/WD) ............................
409225
60-68 4i WD
DEFLECTOR, transfer case mainshaft
oil seal (1 i, I.D. x 2') O.D.) ......... 2410240
63-68 CORVETTE,
63-68 Ser. 10 (exc. 4/WD),
63-68 Ser. 10 (4 /WD) (2nd Ser.),
64-68 G-10-20 (exc. 3.36 ratio),
65-68 PASS. w 12 bolt ring gear ........ DEFLECTOR, pinion flange
3918415
ALL ALL w/2% splined end prop.
DEFLECTOR, shaft pillow block yoke
shaft,,,,,,,,,,,,,,,,,,,,,,,,
(2% I.D.x3%O.D.x'/boffset),,,,,,,
3819016
64-68 Ser. 20-30 w'sgl, spd. axle ....... DEFLECTOR, pinion flange (2 3/4 I.D. x
3 1/
' %a O.D.) ......................... 3826135
64-68 G-10 w 3.36 ratio ............... DEFLECTOR, prop. shaft pinion flange
4
65-68 PASS. w/10 bolt ring gear , , , , , , , ,
(3342 O.D. x 1 '4 4 LD.) ............... 3832398
65-66 Ser. 20 w/leaf type springs....... DEFLECTOR, prop, shaft pinion flange
(3' s/, 6 O.D. x 234 6I.D.) ............... 24364680
46-60 '_, 1 TON ......................
SPACER, flange,
57-59 Ser. 3E-3G w,/4,/WD, , , , , , , , , , , , , ,
frt. axle flange (2 I.D. x 2% O.D. x'/ 6 )
3682152
39-40 VF, WD w/2-SPD.,
41-55 2-SPD. (1st Ser.) , , , , , , , , , , , , , , , ,
WASHER, flange (1'/32 x 1'/ex'/q thick) , , , , ,
2277315
40
ED.
41-55 UTILITY (1st Ser.) (exc. 2-SPD.),
46-65 ',, 1 TON,
67-68 Ser. 20-30 ...................... WASHER, flange (2 1 / 6 x 1 563 3 x "/6 , thk.) .. 3725866
53-55 CORVETTE .................... WASHER, dr. ( 1 5 4 6 0.D. x 3/a I.D. x'/3z thk.)
513716
PASS., '/z TON (1st design),
55
WASHER, flange ( 29/3 2 I.D. x 1% O.D. x%2
57-59 Ser. 3Aw/4/WD,,,,,,,,,,,,,,,,,
thick) .............................
3705782
..............
................
................
.........................
........................
........................
.....................
..........................
3/_ 1967
5.543 -5.545
892
65-66 Ser. 20 w leaf type springs ....... WASHER, drive pinion slinger nut (l'
O.D. x 39/ 4 I. D. x !) thk.) (Dana 30275)
65-66 Ser. 20 w 'leaf type springs ....... WASHER, pinion brg, spacer (Dana 30982)
58-59 ' 2 TON w Trac.,
60-68 4 WD,
65-67 Ser. 10 wjleaf type springs ....... SLINGER, drive pinion oil (Dana 30180).
65-66 Ser. 20 w/leaf type springs ....... SLINGER, drive pinion oil ( 1/8 I. D. x93,
O.D. x 6 4 thk.) (Dana 30273) .........
5.548
40-47
40-47
41-53
48-54
49-54
48-54
50-54
38-39
40
41-53
40-54
41-59
41-55
55-59
60-63
64-68
64-68
64-68
64-68
67-68
54-55
55-65
55-59
55-63
55-66
60-62
23530150
2442778•
1
1
.10
.15
2346834
1
.20
2353014*
1
.20
U-JOINT ASSEMBLY-REPAIR KIT, Universal
NOTE: Nos. following model usages are forged on the frt. and rear yokes respectively. Also
see groups 4.404 and 4.405 for Universal Joint attaching parts.
' TON w/3-SPD .
(3653057 Frt,-3665768 Rr.) ...... , ...
1
606779
?z TON w 4-SPD
(3658724
Frt.-3665768
Red
Stripe
Rr.)
1
609531
3
4 TON w/3-SPD
front (591648 Frt.-596911 Rr.).......
1
591646
'z TON w 3-SPD.,
PASS. (exc. P.G.)
front (591644 Frt.-3665768 Rr.)......
1
591642
=. TON w 4-SPD
front (3686323 Frt.-3665768 Rr.) ..... 3689266
1
PASS. w.P.G . ..................
(3703214 Frt.-3665768 Rr.).......... 3704232
1
COMM., UTIL. w/4-SPD. (exc.
VE, VF)
REPAIR KIT, front and rear,
COMM., UTIL. (exc. KC, WD) • ....
front (consists of 1 trunnion, 4 brgs.,
'i TON (exc. D-D)
4 brg. ring s )
609948 A.R.
PASS., -- TON
REPAIR KIT (consists of 1 trunnion,
4 brgs., 2 snap rings, 4 hex. hd.
bolts and 2 lock plates)
609944
1
'), 1 TON,
UTILITY,
' 1 TON w 'H.D., 4-SPD„
Ser. 10 thru 30,
Ser. 20-30,
Ser. 10 (4 WD) w - 3-SPD. (exc.
H.D. i,
Ser. 10-20 w/H.D. 3-SPD. (exc.
4 'WD),
Ser. 10-20 w'4-SPD., T.H......... REPAIR KIT, rear, all joints (finger dia.,
Ser. 20 (4 WD)
.773) (Spicer 5-143X) ( 3 °/3 2 O.L.)
3708961
1
2 TON (1st Ser.)
REPAIR KIT, front, rear and inter.
(finger dia. .775)
3707830' A.R.
'z TON (exc. SUB, 4/W.D.),
Ser. 10 (SUB) w/114 W.B. (exc.
4'W.D.),
PASS., TAXI, CORVETTE,
'; TON,
Ser. 10 (SUB) w/115 W.B. (exc.
4 /W.D.),
...............
.................
.................
...............
.................
.....................
...............
..................
............
..................
................
....
............... ...
1
Chevrolet
13.25
16.00
13.75
12.85
16,00
13.15
6.15
5.20
8.70
8.75
5.545-5.548
893
64-68 CORVETTE,
64-68 PASS.,
64-66 Ser. 10 (SGL. UNIT) w/115 W.B.
(exc. 4,'WD, 4-SPD. H.D.),
65-66 Ser. 10 (D-D) w/H.D. 3-SPD.,
4-SPD.,
65-66 Ser. 10 (115 W.B. w4.11 ratio)
(283) (exc. 4/WD, 3-SPD. H.D.,
4 -SPD., SGL. UNIT) ...........
66-68 Ser. 20 (D-D) (104 W.B. w /3-SPD.)
(exc. H.D.),
66
Ser. 20 (D-D) (104 W.B. w/3-SPD.)
exc. H.D.),
67-68 Ser. 10 w'4-SPD. (exc. 4/WD),
67-68 Ser. 20 (D-D) w/104 W.B. (Muncie
3-SPD., P.G.) .................
PASS. (exc. T.H.),
66
66
Ser. 20 (4/WD) (exc. 4-SPD.),
66
Ser. 20 w/3-SPD. (exc. H.D.,
4 'WD, 104 W.B.),
67-68 Ser. 10-20 (exc. D-D, 4/WD,
4-SPD., T.H.),
67-68 Ser. 10-20 (D-D) (3-SPD., P.O.)
(exc. 104 W.B.),
REPAIR KIT, U-joint (w/o grease fitting),
rear U-joint,
67-68 G-10-20 ........................
66-68 PASS. w'T.H . ..................
66-68 PASS. w T.H . ..................
frt. and intermediate. . . . . . . . . . . . . . . .
REPAIR KIT, front U-joint ............
REPAIR KIT, rear U-joint.............
67-68 Ser. 10-20 (4; WD) ...............
REPAIR KIT, (incl. yoke and seal) (aux.
frontprop.) ........................
68
3889690- A.R.
5677659A 1
5698221♦ 1
3912106
1
CCRVETTE w T.H . ............ REPAIR KIT, U-joint .................
1
390133
ANOTE: Use only with prop shaft assy. 5697871 for 1966.
-NOTE: Consists of 1 trunnion, 4 brgs., 4 snap rings, 2 "U" bolts, 4 washer and 4 nuts.
*NOTE: Consists of 1 trunnion, 4 brgs., 2 snap rings, 2 "U" bolts, 4 washers, 4 seals and 4 nuts.
5.95
10.40
9.70
19.50
9.20
5.555 YORK—YOKE ASSY.—FLANGE—NUT ASSY., Universal Joint and Transfer Case
39 -40 VE, VF, WD ...................
51-53 ALL w/Prop. Brake,
54-55 ALL w/Prop. Brake (1st Ser.) (exc.
2-TON),
55-59 '/, TON w/Prop. Brake (2nd Ser.),
55-56 1 TON, (2nd Ser.)'(exc. H.D.),
57-59 1 TON,
57-59 Ser. 3A w/4WD,
60-65 Ser. 20 w/3-SPD. H.D., 4-SPD.
(exc. 4/WD, D-D),
60-62 Ser. 20 (D-D),
60-66 Ser. 30,
63-66 Ser. 20 (D-D) (125, 137 W.B.
w 3-SPD. H.D., 4-S PD.),
67
Ser. 30 w, 11,000 lb. axle (exc.
4 WD) .......................
57-59 Ser. 3E-3G w/4/WD ..............
front and rear, flange,
front,
frt. and aux. (drum flange) (forged
131) (4" bolt circle) ..............
40-47 PASS., '2 TON w/3-SPD.,
48
PASS . .........................
front (forged 3653057 or 3657543) ...
*NOTE: Yoke identified by No. 3653057 has 1) dia. shoulder.
40-54 PASS., '2 TON w/3-SPD.,
54
PASS. w/P.G.,
54
TON w' H.T.,
54-55
TON w. H.D. (1st Ser.) .........
rear (forged 3665768) ...............
TON w 4-SPD .................
40 -47
front (forged 3658724)..............
41 -53 ': TON w/3-SPD . ...............
front (forged 3652866) ..............
40-54 ' 2 TON w/4-SPD . ...............
rear (red paint stripe) ...............
48-54 , TON w'3-SPD. H.D.,
49 -54 PASS. (exc. P.G.) ..............
front (forged 591644)................
48-54 =_ TON w 4-SPD .................
front (forged 3686323)...............
50-54
PASS. w'P.G ...................
front (forged 3703214) ..............
5.548-5.555
894
080384 A.R.
8.50
3653057* 1
3.49
3665768
591648
3681934
1
1
1
1
4.75
4,25
4.65
5.15
591644
3686323
3703214
1
1
1
4.20
5.40
3.49
3658724
^-1967
54-55 '/, TON w/3-SPD. (1st Ser.)
(exc. H.D.),
54-55 1'/ TON w/2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.)
54-55 %, 1 TON w/3-SPD., H.D. (1st
Ser.)
41-53 3/4 , 1 TON, UTILITY
55
Yz TON w/H.D., 4-SPD. (1st Ser.),
57-59 Ser. 3A w/4/WD
57-59 Ser. 3E-3G w/4/WD
60-62 4/WD
65-66 Ser. 10-20 (4/WD) w/4-SPD. ......
54-55 3/,, 1, 1'4 TON (1st. Ser.) (exc.
2-SPD. ),
55
55
D-D, 1 TON (2nd Ser.) (exc. F),
56-59 Ser. 3B-3E w/H.D., 4-SPD.,
56-59 D-D, 1 TON (exc. Ser. 3C),
60-66 Ser. 20 (exc. 3-SPD., D-D, 4/WD),
60-64 D-D (exc. 104 WB),
60-64 Ser. 30 (exc. D-D),
65-68 Ser. 30 (exc. 4/WD),
65-68 Ser. 20 (D-D) (exc. 104 W.B.),
65-68 Ser. 20 w/H.D. 3-SPD.
4-SPD. (exc. 4/WD, D-D) ,
67-68 Ser. 20 (4/WD) (8 cyl.)
54-55 S (1st Ser.)
54-55 2 TON (1st Ser.) (exc. S),
54-55 1'4 TON w/2-SPD. (1st Ser.)......
55-63 PASS. (exc. Muncie trans.),
55-59 z TON (exc. H.D., 4-SPD.),
55-59 ?i4 TON (exc. prop. brake).........
60-64 Ser. 10-20 w/3-SPD. (exc. D-D,
H.D., 4/WD),
60-62 Ser. 20 (D-D) (3-SPD. w/104 W.B.)
(exc. H.D.)
60-64 Ser. (D-D) w/3-SPD. (exc. H.D.),
61-62 Ser. 10-20 w/P.G. (exc. 115 W.B.),
64
PASS. w/P.G.,
65-66 Ser. 10-20 w/3-SPD. (exc.
H.D., O.D.),
67-68 Ser. 10-20 w/Muncie 3-SPD. (exc.
4/WD)
65
Ser. 10 w/leaf type springs (exc.
P/Trac., O.D.)
55-59 H, Ser. 3A w/HD., 4-SPD.,
55-59 F, Ser 3C w/prop. brake,
55-59 J, Ser. 3E w/H.T
60-64 Ser. 10 (115 W.B. w/3-SPD. H.D.,
60-64 Ser. 20 (D-D) w/104 W.B. (exc.
3-SPD.),
60-67 Ser. 30 (D-D) w/104 W.B.,
65-68 Ser. 10 w/3-SPD. H.D., 4-SPD.
(exc. 4/WD, 127 W.B.),
65-67 Ser. 20 (D-D) (104 W.B. w/3-SPD,
H.D., 4-SPD .
55-62 CORVETTE (8 cyl.)
58-64 PASS.,
64
64-66 Ser. 10 (3-SPD. w/115, 127 W.B.)
(exc. 4/WD, H.D.),
65-66 Ser. 20 w/3-SPD. (exc. H.D.,
4/WD, D-D),
67-68 Ser. 10-20 w/115, 127 W.B. (exc.
4-SPD., 4/WD)
57-59 Ser. 3A w/4WD
57-59 Ser. 3A w/4/WD
57-59 Ser. 3A w/4/WD
57-59 Ser. 3E-3G w/4/WD
57-59 Ser. 3 w/4/WD
60-67 Ser. 20 (4/WD) . . . . . . . . . . ........
................
.........................
.............
.................
..............
..........................
...........
.....................
...................
.......................
................
................
.................
.............
................
.................
................
................
.............
..................
©-1967
front (drum flange) (4 1/2 " bolt circle)...
3707776
1
7.00
...............
3845092
1
7.50
trans. to transfer case,
transfer case to trans. and frt. axle,
front (stamped 3657106),
assy. w/sleeve, front prop. shaft .....
3882330
1
9.95
3707214
3707215
1
1
12.00
15.65
3707216
1
10.50
3707059
A.R.
6.70
3718646
3712379
11
1
14.50
9.00
3740097
3750692
2384943
2352366
2352389
1
1
1
1
2
4.60
14.40
14.95
13,85
16.75
2067521
A.R,
17.25
front (forged 3845022)
assy. w/sleeve, rear prop. shaft.
assy. w/sleeve, rear
..............
...............
assy. w/sleeve, rear ................
(16 splines-6"/ 6 O.L.)
assy. w/sleeve, front
assy. w/sleeve front,
prop. shaft and U-joint,
frt. prop. shaft front yoke (15/6
dia. bore (16 splines-5' 9/64 O.L.) .....
assy. w/sleeve, front,
frt. pump, shaft and U-joint
(16 splines-7% O.L.)
front
............
..............................
front shaft rear yoke (cast 3740097)...
aux.front
transfer case drive shaft frt.........
transfer case drive shaft rear .......
transfer case drive shaft frt. and rear .
U-joint sleeve, all locations,
rear prop, shaft and U-joint
.........................
..........
5.555
895
60-63 Ser, 10 w/3-SPD. H.D., 4-SPD.,
P,G. (127 W.B.),
63-68 Ser, 10 (127 W.B. w/3-SPD.,
H,D., 4-SPD.) (exc. 4/WD),
67
Ser. 10 (8 cyl.) w!3-SPD.,
4-SPD. (exc. D-D, 4/WD),
67-68 Ser. 10 (4 WD) w'127 W,B. (8 cyl.)
67
Ser. 20 (4/WD)
67-68 Ser, 10-20 (4/WD)
68
Ser. 30 w 11,000 lb. axle ... , .... .
57-59 Ser. 3A w/4/WD
..................
...............
.................
64-66
60-66
60-66
66
60-66
67-68
60-68
Ser. 10 (4/WD) w/127 W.B. ...... .
Ser. 10 (4 WD)
Ser. 20 (4 (WD),
Ser. 10 (4WD)
4/WD YOKE ASSY .
Ser. 10 (4/WD)
Ser. 20 (4/WD)
..................
..................
............. .
.................
..................
61-63 4/WD w/3-SPD .................
63
CORVETTE (exc. Muncie 4-SPD.),
64
CORVETTE w,'P.G ..............
63
64
65-68
63-64
64-65
65-67
65-68
67-68
67-68
65-66
66-68
67-68
65
65-66
67-68
66
67-68
67-68
67-68
67
67-68
67-68
CORVETTE w/Muncie 4-SPD.,
CORVETTE (exc. P.G.),
CORVETTE (exc. T.H.)..........
PASS., w,/Muncie trans.,
G-10 (1st design),
Ser. 10 w O.D.,
PASS. (exc, T.H.),
Ser. 20 (D-D) (P.G. w/6 cyl.),
Ser. 10-20 w/115, 127 W.B. (exc,
4-SPD., T.H., 4/WD)...........
PASS. w'T.H.,
Ser. 20-30 w/T.H .
Ser. 10 w 115, 127 W.B. (T.H.) ....
G-10 (1st design)
G-10 (2nd design),
G-10-20
PASS. w 'T.H .
CAPRICE w,/P.G .
Ser. 10 (4 /WD)
Ser, 10-20 (4/WD)
CAPRICE wT.H . .... . ........ . .
PASS. w/T.H. (exc. CAPRICE) ...
4 /WD ..........................
........... . . . .
................
........................
.............. . . . .
...............
..................
...............
68
CORVETTE w/T.H . .............
41-47 AN, Y, BN, M, 0, DS, P, ES, Q .. ,
41-42 1 TON, UTIL. (exc. YU, MU)
41-53 '; TON ..................... . ...
41-47 AN, BN, DS, ES .................
41-47 UTIL. (exc. YU, MU, OH, PP, QP ..
42
MT ............................
48-50 UTILITY,
48-55 1 TON w!4-SPD, (1st Ser.),
54-55 '/a TON w/4-SPD. (1st Ser.),
55-64 '4 TON w/3-SPD. H,D., 4-SPD.
(2nd Ser.),
60-64 Ser. 20-30 w/3-SPD. H.D..,
4-SPD.,
65-66 Ser. 10-20 w/4-SPD.,
66
Ser. 10-20 w,'3-SPD. H.D.,
65
Ser. 20-30 (exc. D-D, 4/WD),
67
Ser. 10 thru 30 (exc. 4/WD, 11,000
lb. axle) .....................
48-50 ALL w/tru-stop brake............
48-53 1 TON, UTILITY (exc. short COE) .
48-53 2 TON (SBC) ..................
rear prop shaft and U-joint...........
U-joint ............................
U-joint, centering, aux. front .........
U-joint
YOKE ASSY., aux. frt. and rear prop.
shaft,
rear,
aux. frt. and rear prop. shaft U-joint,
3763340
1
2334834
1
3903711
1
3914967 A.R.
11.90
5.75
15.00
U-joint ............................
u/deflector(Timken)
A1-3897-A-1431
YOKE ASSY., w/deflector (Timken
A-3897-Q-1655) ....................
YOKE ASSY., frt. prop, shaft and U-joint
3882328
1
10.30
2410237
A.R.
13.85
2410238
3798170
1
1
18,35
6.20
............................
................
...................
YOKE ASSY., front U-joint
............
3818916
1
8.45
YOKE ASSY., front U-joint
.............
3868728
1
8.40
YOKE ASSY., U-joint sleeve yoke
(27 splines)
.......................
3868649
1
9.25
YOKE ASSY., U-joint 22.75 sleeve yoke
(splines)
YOKE ASSY., U-joint sleeve (16 splines)
3871115
3868095
1
1
22.05
9.75
3885530
5697874
3895833
1
1
1
9,75
10,50
8.90
3903706
5699832
7801551
1
1
1
15.50
28.50
22,00
3912176
3930827
1
1
25.50
591172
1
6.25
3657394
1
500
3680420
1
5.25
591700
591718
1
1
7.05
11.05
3686940
1
8.40
..........................
YOKE ASSY., U-joint.................
YOKE ASSY., prop, shaft..............
YOKE ASSY., w/dampener front U-joint .
YOKE ASSY., front U-joint sleeve,
aux,front
YOKE ASSY., front U-joint sleeve ... , ..
YOKE ASSY., front U-joint sleeve ......
YOKE ASSY., w/deflector (Timken
A-3897-C-2811) ....................
YOKE ASSY., U-joint sleeve front ......
FLANGE, front (at trans.) (ident. daub
oran e pa int )
......................
g
.........................
FLANGE (at hanger) (stamped 3657394)
FLANGE, frt. prop. w/dust shield (use
w/dbl, row brg.),
inter, prop. (forged 3657394).........
FLANGE, front U-joint ................
FLANGE, front ......................
FLANGE, frt. prop. w/deflector,
inter,, w/deflector ..................
5.555
896Chevrolet
Y_1967
Motor Division
55
COMM., UTIL. w/4-SPD. (1st Ser.)
(exc. '2 TON),
55-59 Ser. 3 w/4-SPD. (2nd Ser.) (exc.
TON),
55-59 ',a, 1 TON w/H.D. 3-SPD.,
60-64 Ser. 20-30 w/3-SPD. H.D.,
4-SPD. (exc. 4/WD),
60-64 Ser. 20-30 w/3-SPD. H.D.,
4-SPD. (exc. 4/WD)
65-66 Ser. 30 (exc. A.T.)
54-55 X, 2 TON (SBC) (1st Ser.) ........
54-55 "a, 1 TON w/H.T. (1st Ser.).......
55-62 ALLw/H.T. (2nd Ser.) (exc.'/Z TON)
57-59 ALL w/4/WD
............
..............
...................
65-67 Ser. 20 w/4-SPD. (exc. 4/WD),
67
Ser. 30 (exc. close ratio 4-SPD.,
11000 lb. axle)
67
Ser. 30 w/11,000 lb. axle .........
68
Ser. 30 w/11000 lb. axle .........
68
Ser. 20-30 (exc. H.D. 4-SPD., T.H.,
11,000 lb. axle)
Ser. 30 w/11,000 lb. axle .........
67
................
FLANGE, front (retains speedo.,
drive gear, front of drum
FLANGE, front (forged 3705183) .......
FLANGE, front
FLANGE, front
FLANGE, transfer case input mainshaft
yoke and front axle drive
591607
3705182
3707632
3716756
FLANGE, front U-joint................
FLANGE, front U-joint
FLANGE, frontU-joint
2450325
3830567
3866674
1
1
1
8.05
7.90
10.50
NUT ASSY., U-joint front flange lock ...
3915056
3830575
1
1
8.50
1.25
3723361
A.R.
.06
087008
1
.10
080390
1
.06
.............
......................
......................
............
................
................
............... FLANGE, front U-joint ................
5.556
1
1
1
1
8.15
11.00
5.50
6.55
2384944 A.R. 14.95
PLUG—WASHER—SEAL — CAP—NUT, Universal Joint Sleeve Yoke
...........
ALL ALL w/1"/ 6 " dia. hole
60-66 Ser. 10 (102, 115 W.B. w/H.D.
3-SPD., 4-SPD.) (exc. 4/WD),
60-66 Ser, 20 (D-D) (104 W.B. w/H.D.
3-SPD,, 4-SPD.),
60-66 Ser. 30 (D-D) w/104 W.B
60-66 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
60-66 Ser. 20 w/H.D. 3-SPD., 4-SPD,
(exc. D-D, 4/WD),
60-66 Ser. 20-30 (D-D) w/125 W.B.,
60-66 Ser. 30 (exc. D-D),
65-66 Ser. 10-20 (4/WD),
P/Trac.),
67-68 Ser. 10 (115 W.B. w/4-SPD. trans.)
(exc. 4%WD),
67-68 Ser. 10 (D-D) w/4-SPD. trans.,
67-68 Ser. 20-30 (D-D) (104 W.B.
w/4-SPD. trans.),
67-68 Ser. 20 (4/WD),
67-68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.)
66
Ser. 10 (4/WD),
67-68 Ser. 10 (4/WD) w/115 W.B.,
67-68 Ser. 10 (4/WD) (127 W.B. w/6 cyl.)
66-68 Ser. 10-20 (4/WD)
..........
...............
©-1967
dust
..............................
yoke front,
rear
..............................
rear,
aux. frt
............................
5.555-5.556
897
39-40 VE, VF, WD,
41-53 3/4 , 1 TON, UTILITY,
54-55 S (1st Ser.),
55
H, F w/H.D., 4-SPD.,
55
F, J w/H.T. (2nd Ser.),
56-59 Ser. 3A-3C w/H.D., 4-SPD.,
56-59 Ser. 3C-3E w/H.T.,
57-60 4/WD,
60-66 Ser. 10 (w/3-SPD. H.D., 4-SPD.)
(exc. 4/WD, 127 W.B.),
60-66 Ser. 20 (D-D) (104 W.B. w/3-SPD.
H.D., 4-SPD., H.T.),
60-66 Ser. 30 (D-D) w/104 W.B.,
65
Ser. 20 w/leaf type springs (exc.
P,'Trac. ),
65-66 Ser. 10-20 (4/WD),
67-68 Ser. 10 (115 W.B. w/4-SPD. trans.)
(exc. 4/WD),
67-68 Ser. 10 (D-D) w/4-SPD. trans.,
67-68 Ser. 20-30 (D-D) (104 W.B. w/4SPD. trans.),
67-68 Ser. 20 (4/WD)
67-68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.)
39-40 VE, VF, WD,
41-53 '/a, 1 TON, UTILITY,
54-55 S (1st Ser.),
55
H, F w/H.D., 4-SPD.,
55
F, J w/H.T. (2nd Ser.),
56-59 Ser. 3A-3C w/H.D., 4-SPD.,
56-59 Ser. 3C-3E w/H.T.,
60-66 Ser. 10 w/3-SPD. H.D., 4-SPD.
(exc. 4/WD, 127 W.B.),
60-66 Ser. 20 (D-D) (104 W.B. w/3-SPD.
H.D., 4-SPD., H.T.),
60
Ser. 20 (4/WD),
60-66 Ser. 30 (D-D) w/104 W.B.,
65-66 Ser. 10-20 (4/W/D) w/4-SPD.,
67-68 Ser. 10 (115 W.B. w/4-SPD. trans.)
(exc. 4/WD),
67-68 Ser. 10 (D-D) w/4-SPD. trans.,
67-68 Ser. 20-30 (D-D) (104 W.B. w/4SPD. trans.),
67-68 Ser. 20 (4/WD),
67-68 Ser. 10 (4/WD) w/127 W.B. (8 cyl.)
54-55 '/,, 1 TON, UTILITY (1st Ser.)
(exc. S),
55
55-59 D-D, 1 TON (exc. F, Ser, 3C),
56-59 Ser. 38-3E w/H.D., 4-SPD.,
60-62 Ser. 20 w/3 SPD. H.D., 4 SPD.,
P.G. (exc. 4/WD, D-D),
60-67 Ser. 20-30 (D-D) (exc. 104 W.B.),
60-66 Ser. 30 (exc. D-D),
63-66 Ser. 20 w/3-SPD., H.D., 4-SPD.,
(exc. D-D, 4/WD)
65-68 Ser. 20 w/H.D., 4-SPD. (exc. D-D).
54-55 %, 1 TON, UTILITY (1st Ser.)
(exc. S),
55
D-D, 1 TON (2nd Ser.) (exc. F),
55
56-59 D-D, 1, 1'/ TON (exc. Ser. 3C),
56-59 Ser. 3B-3E w/H.D , 4/SPD.,
60-64 Ser. 20 w/3 SPD. HD., 4-SPD.,
P.G. (exc. 4/WD, D-D),
60-68 Ser. 20-30 (D-D) (exc. 104 W.B.),
60-68 Ser. 30 (exc. D-D),
65-68 Ser. 20 w /H.D., 4-SPD, (exc. D-D).
..................
..............
WASHER, split (steel) (1 9/ b I.D. x 1/)
O.D.
O.D. x Y3 , thk.)
.....................
279335
2
.10
WASHER (cork) (1Y4 x 1% x 5/ 6 ) .........
084415
1
.15
WASHER (steel) (1 1 / 6 O.D.-16)
(teeth)
.............................3705196
1
.10
WASHER (cork) (1 3/4 O.D.-16 teeth) ..... 3705197
1
.10
5.556
898
©-1967
58-64 PASS.,
64
Ser. 10 w/115, 127 W.B. (exc.
4/ WD),
64-66 Ser. 10-20 w!3-SPD. (exc. H.D.,
D-D, 4'WD),
67-68 Ser. 10-20 w'115, 127 W.B. (exc,
4-SPD, trans., 4/WD)
57-59 Ser. 3A w/4/ WD.,
60-61 4 'WD,
63-68 4'WD
57-59 Ser. 3A •,v/4/WD.,
60-61 4/WD
63
4'WD
64-68 Ser. 10-20 (4 WD)
64
Ser. 10 (4/WD),
65-66 Ser. 10 (4 /WD) w / 127 W.B.,
67-68 Ser. 10 (4 WO) w 115 W.B.,
67-68 Ser. 10 (4 WD) (127 W.B. w/6 cyl.)
60-66 Ser. 10 (127 W.B. w/3-SPD. H.D.,
67-68 Ser. 10 w/4-SPD. trans. (exc.
4'WD)
67-68 Ser. 10 (4,'WD) (8 cyl.)
60-66 Ser. 10 (127 W.B. w/3-SPD. H.D.,
67-68 Ser. 10 w/4-SPD. trans. (exc.
4/WD)
67-68 Ser. 10 (4'WD) (8 cyl.)
57-59 Ser. 3A w /4 /WD
57-59 Ser. 3E-3G w/4/WD
60-61 4/WD,
64-66 Ser. 20 (4 'WD)
39-40 VE, VF, WD,
41-55 COMM., UTILITY (1st Ser.) (exc.
TON),
55-59 ' z TON v:/H.D. , 4-SPD.,
55
F, J w Prop. Brake (2nd Ser.),
55
'., 1 TON (2nd Ser.) (exc. F, J),
56-59 Ser. 3C-3E w,'prop. brake,
56-59 'a, 1 TON (exc. Ser. 3C-3E),
60-67 Ser. 10 thru 30 (exc. 127 W.B.,
4 'WD),
65-66 Ser. 10 w 'leaf type springs
(exc. P/Trac.),
67
Ser. 10 (4/WD) (127 W.B. w/6 cyl.),
67
Ser. 20 (4/WD)
65-66 4 'WD
57-59 Ser. 3A w; 4/WD„
60
4;'WD.,
60-62 Ser. 10 w/127 W.B. (exc. 3-SPD.,
4'1VD)
63-68 Ser. 10 (115, 127 W.B. w/3-SPD.
H.D., 4-SPD.) (exc. 4/WD),
63-66 4 'WD,
67-68 Ser. 10 (4 'WD) w/127 W.B. ...... .
67-68 Ser. 10-20 (4 'WD) w/aux. shaft...
57-59 4 'WD
57-59 Ser. 3E-3G w/4/WD
..........
..........................
..........................
..........................
...............
.......................
...........
.......................
...........
.................
..............
..................
WASHER, inter yoke (1'/e O.D.-10 teeth) . 3743255
1
10
WASHER, aux. front and rr. prop, shaft . .
240803
2
07
080386
A.R.
13
1
m
WASHER, rubber, aux, front,
rear prop, shaft and U-joint assy,,
aux. front,
rearshaft
.........................
WASHER (steel) rear prop. shaft and
U-joint assy. (1 5/32 I.D. x 1°; 6 O.D.) ... 5238167
WASHER, (cork) rear prop. shaft and
U-joint assy. (P / 6 I.D. x 1 41/6 , O.D.)...
SEAL, rubber—front prop, shaft,
all positions,
aux. frt., rear prop. shaft
............
5238166
1
2296505 A.R
.35
..................
..........................
CAP (steel) ('q x 1 15/ 6 O.D.),
front prop. shaft
....................
3663239
1
55
.........................
..............
CAP, aux. frt. and rr. prop, shaft and
U-joint, dust rear
NUT, attach. frt. prop, shaft,
attach. aux, frt. prop, shaft (7'6-20)...
240804
1
.75
...................
3722853 A,R.(6.172)
5.560 GASKET—RETAINER—SEAL, Propeller Shaft Universal
Joint Trunnion
.............
.............
(?(
.................
41-53 'a, 1 TON, UTILITY
I.D. x 1/64 O.D.)
41-53 3 4 , 1 TON, UTILITY
RETAINER, gasket...................
NOTE: These parts used with trunnion having finger diameter of .7385 on all
1941 models with 235 in. engine. Also used on late 1941 models with
216 in. engine.
—1967
3660968 . A.R.
3660969 r A,R.
.07
.10
5.556-5.560
899
54-55 ', 1 TON, UTILITY (1st Ser.),
55-59 '2 TON w/H.D., 4-SPD.,
60-67 Ser. 10 thru 30 (1st design) , ......
63-64 CORVETTE ...................
55-62 PASS., CORVETTE, '4, '/4 TON , , ,
SEAL, yoke brg. ( 25/ 2 I.D. x 1'/a O.D.)
(finger dia. 775) ....................
SEAL, yoke brg. (21/32 I. D. x 1 1/32 O.D.)
2296509
A.R.
.15
(finger dia .596) ....................
3774326
A.R.
.40
57-59
60-66
60-66
66-68
SEAL, transfer case to frt. and rr. axle,
front and aux. prop. shaft,
frt., rr. and aux. prop. shaft,
frt. andinter.,
1178279
A.R.
.16
3821777
A.R.
.40
3841923
A.R.
.15
353896
1
4.35
602688
1
6.70
front ball ..........................
348131
1
1.84
(6 bolt holes)......................
3692835
1
1.84
1.85
Ser. 3A w '4 'WD .................
Ser. 20 (4 WD) ..................
Ser. 10 (4 'WD) ....... ..........
Ser. 10 thru 30 w T.H. (exc. D-D)
66-68
Ser. 20 (D-D) w/T.H . ............
63-64
63-65
63-65
63-65
PASS.,
Ser. 10 (exc. 4 /WD),
Ser. 10 (4 WD) (exc. 4-SPD.),
Ser, 20 (exc. 3-SPD.,H.D., 4-SPD.),
64-65
G-10,
64
TAXI,
65-66 CORVETTE ....................
65
Ser. 10 w /leaf type springs (exc.
P 'Trac,) .....................
64-68 PASS., CORVETTE .............
65
Ser. 10 (D-D) w/H.D. 3-SPD.,
4-SPD.,
66-68 Ser. 10 (127 W.B. w/H.D. 3-SPD.,
4-SPD.) ......................
66-68 Ser. 10 (exc. H.D. 3-SPD.,
4-SPD„ P.O.) .................
66-68 Ser. 20 w /3-SPD. (exc. H.D.,
D-D, 4/WD),
67-68 Ser. 20 (D-D) (6 cyl. w/3-SPD.,
P. G.) .......................
5.564
SEAL, yoke brg. (1'/3 , O.D. x
thk.)
(w /oblong identification mark) .......
SEAL, yoke brg.,
rear,
all locations,
1
frt. andintermediate (1 /32 O.D. x
2 /32 I. D.)
........................
BALL, Universal Joint
38-40 UTIL. (exc. VE, VF, WD) , , , , , , , ,
38 -40
' 1 TON ,,,,,,,,,,,,,,,,,,,,,,
37-54 PASS.,
TON ..................
5.565
frt.(Spicer2-86-89).................
front (used on intermediate joint on
WC) ............................
(usedw/rearjoint),
(used w/front joint).................
COLLAR—SEAT—SEAL, Universal Joint Ball
38-39
41-54
50-54
54
50-54
ALL (VE, VF),
PASS., '2, '-_ TON (exc. P.O., H.T.)
PASS. w/P.G.,
'2 TON w /H.T,,,,,,, , , , , , , , , , , , ,
PASS. w; P.G.,
54
'z TON w 'H.T ...................
SEAT...............................
50-54 PASS. w/P.G.,
54
'i TON w'H.T ...................
3692838
1
SEAL, seat "0" ring (4/ I.D.).........
3689826
1
2
.75
A.R.
.60
.50
5.566
(4.203)
BEARING—ROLLER—SPACER, Universal Joint Yoke Trunnion
38-39
38-39
40-54
40
34, 1 TON, UTILITY (exc.VE, VF),
':2 TON w/4/SPD ................
PASS., 'Z TON ..................
COMM., UTILITY (exc. KC, WD) . ,
41 -53 /3 TON ........................
front and rear,
front yoke .........................
front ('Y, O.D. x 2 3, LD.) ..........
4/4 wide .........................
3665770(
40-54
rear yoke..........................
3665771#
2
2296504
A.R.
2.00
2362290 A.R.
1.25
53-55
55-59
60-68
63
57-59
60-66
60-66
67
PASS., '2 TON ..................
=NOTE: 3665770 and 3665771 for use w/"U" Joint 606779 on 1940-41 models.
COMM., UTILITY (1st Ser.),
Ser. 3 (2nd Ser.),
Ser. 10 thru 30 (exc. T.H.) ........
frt., inter., rear, (1 3/ 6 O.D. x 25/32 thk.)
CORVETTE ....................
(use w/finger dia. over 3/4 )
Ser. 3A w/4/WD .................
inter. and rr.,
Ser. 10 (4%WD) ..................
frt., inter, and rr.,
Ser. 20 (4 /WD),
Ser. 10 thru 30 w/T.H............
frt. and inter. (Spicer 2-6-208X) ......
5.560-5.566
373344
—^ 967
900
53-59 CORVETTE,
55-59 PASS., '2, % TON
front and rear,
60-61 Ser. 10-20 (exc. 4/WD),
62
Ser. 10-20 ......................
all locations (1O O.D. x °/ 6 thk.)..... 3709838 A.R.
63
PASS.,
63-66 Ser. 10 (exc. 4;'WD),
63-66 Ser. 10 (4 /WD) (exc. 4-SPD.),
63-67 Ser. 20 (exc. 3-SPD. H.D., 4-SPD.),
64
PASS. w,O/D.,
04-66 G-10
all locations (16) 6 O.D. x °/a thk.)
TAXI .........................
64
(black oxide on rollers) , , , , ....... 3828467 A.R.
65-68 PASS.. CORVETTE (exc. T.H.),
65-68 Ser. 10-20 (exc. 4-SPD., T.H., D-D),
65-68 Ser, 10-20 (D-D) w/Muncie
3-SPD., P.G.,
65-68 G-10-20 ........................
front,
65-68 Ser. 10 w %4-SPD. ,
65-68 (D-D) w/104 W.B. (3-SPD„
P.0.),
65-68 G-10-20 ........................
rear .............................. 3841935 A.R.
67-68 Ser. 10 thru 30 w;'T.H.,
67-68 Ser. 10-20 (4 'WD)
aux. shaft,
67-68 Ser. 10 (4/WD) w/127 W.B. ...... .
U-joint yoke trunnion
3903723 A.R.
68
CORVETTE w 'T.H . ............ .
U-joint yoke trunnion
386448 A.R.
53-55 COMM., UTILITY (1st. Ser.),
55-59 Ser. 3 (2nd Ser.),
60-62 Ser. 10 thru 30 (exc. 4/WD)
63-67 Ser. 10 thru 30 (exc. D-D),
67
Ser. 20-30 (D-D) (exc. Muncie
ROLLER, brg. frt., inter., rear, (use w/finger
3-SPD., A.T.)
dia. over '/a),
63-67 CORVETTE
rear wheel drive shaft U-joint ........ 7450409 A.R.
53-59 CORVETTE,
55-59 PASS., ,
TON
ROLLER, brg., front and rear,
60-62 Ser. 10-20
all locations ( 3/33 dia. x "/ 2 O.L.), , , . ,
606868 A.R.
62
4 WD w /3-SPD
ROLLER, frt., prop. shaft and bearing
support (w/finger dia. .894)
3729088 A.R.
63
PASS., CORVETTE w/4-SPD.,
P Trac.,
63-64 4 'WD, w/3-SPD.,
PASS., w/O/D,
64
64
TAXI,
64
64
Ser. 20 (D-D) w/3-SPD.
(exc. 3-SPD. H.D., 104 W.B.) ... ROLLER, frt. prop, shaft and bearing
(13/
64-66 G-10
support
x '/3 2 dia.) (black
65-66 Ser. 10-20
oxide coated)......................
9418456* A.R.
*NOTE: Also used with leaf type springs on 65 Ser. 10-20 exc. P/Trac,
64-68 PASS., CORVETTE (exc. T.H.),
65-68 Ser. 10-20 (exc. 4/WD)
ROLLER, U-joint yoke trunnion brg. .... 9419578 A.R.
60-68 (4 WD)
ROLLER, front trunnion br g............ 2084579 A.R.
68
CORVETTE w,'T.H .
ROLLER, bearing
3924169 A.R.
68
CORVETTE w/T.H .
SPACER, trunnion brg................. 3882335 A.R.
...............
1.45
...........................
...............
...............
..............
.................
...................
...............
......................
................. .
..........
...........................
......................
...........
.........................
.............
.............
....................
1.45
.50
1.50
.02
.05
.02
05
50
03
5.567 SHIM, Ball Retainer
38-39 ALL (exc. VE, VF),
41-53 PASS., 'z, '-, TON (exc. P.G.),
54
PASS., 'z TON (exc. P.G., H.T.),
54-55 ';, 1 TON w 'H.D. 3-SPD. (1st Ser.)
40
COMM., UTIL. (exc. WD), , , , , , , , ,
50-54 PASS. w P.O.,
54
'z TON w'H.T . .................
o _1967
1
(4 / I.D.) (4 holes),,,,,,,,,,,,,,,,,,
front joint .........................
3699727 A.R.
3653962 A.R.
.10
.08
(46) 1.D.)(6 holes),,,,,,,,,,,,,,,,,
3692836 A.R.
.11
5.566-5.567
901
5.572 SEAL KIT—SEAL, Universal Joint Ball
38-40 ALL (exc. VE, VF, WD),
41-53 PASS., '2, 3/4 TON (exc. AL, AM,
BL, BM),
54
PASS., ' TON ..................
38-40 ALL,
41-53 PASS., , ',-; TON (exc. AL, AM,
BL, BM),
54
PASS., '2 TON ..................
38-40 ALL,
41-54 PASS., '/2, '/4 TON (exc. AL, AM,
BL, BM) .....................
consists of 4 shims, 2 seals .........
3723490
1
1.15
SEAL, collar (cork—rubber)............
3707194
1
.45
SEAL (cork-rubber) ...................
3707193
1
.30
595013
2
06
5.576 WASHER, Universal Joint Ball Pa cking
38-40 PASS., COMM.,
41-54 PASS., i'2 TON ..................
oil seal (2 11/32 O.D. x 11 6 ) ............
5.578 TRUNNION, Universal Joint (For Pass., %Z Ton. See 5.548 Repair Kit)
55-63 Ser. 10,
64
TAXI,
64
PASS. w/O/D,
64-65 G-10
64-65 Ser. 10-20 ......................
frt., inter., rear (finger dia. 596)......
3830580 A.R.(5.548)
5.579 SPACER, Universal Joint
38-40 COMM., UTIL. (exc. VE, VF, WD),
41-47 COMM. (exc. AN, BN, DS, ES) ....
41-48 PASS., COMM. w/3-SPD..........
48-54 ''z, a TON w/3-SPD ..............
49-54
PASS. (exc. P.G.) ...............
54-62 ALL w/H.T. (exc. 12 TON) .......
5.586
(use w/4 speed transmission) ........
(13/8 O.D. x 1 I.D. x 2 O. L. )........
(1 I.D. x 3"/ 2O.L.) ................
(1 I. D. x 4 3/ 6 O.L.) .................
(1% I.D. x 1 5/ O.D. x 1' 9/32 O.L. steeltubing) .....................
1
1
1
.06
.89
.75
591758
1
.72
3707631
1
1.50
LOCK RING—BOLT—BOLT UNIT—STRAP—U-BOLT, "U" Joint Trunnion
and Yoke
39-55
55-59
60-68
63-67
40-54
53-62
55-59
60-68
COMM., UTILITY (1st Ser. ),
Ser. 3-4 (2nd Ser.),
Ser. 10 thru 30 ..................
CORVETTE ....................
PASS., 1 i TON .................
CORVETTE ....................
PASS., tie, 4 TON ...............
PASS. Ser. 10 thru 30,
64-68
G-10,
frt. inter., rear (use w/finger
diameters .773 and .775) ...........
( u/6 I.D. —snap)....................
front,
frt. and rear,
3721973
3652927
A.R.
2
.03
3721887
A.R.
,10
1456507
A.R.
14
3723367 A.R.
12
/16) ............................
3740382
4
20
BOLT, shaft and U-joint assy. strap
(s49-24x 1 ) .....................
3887348
4
15
1
95
65-68
66
67
67
CORVETTE ....................
all locations (finger dia. 596) ........
PASS. (8 cyl.) w/T.H.,
STA. WAG. (8 cyl.) w/T.H.,
IMPALA, CAPRICE (8 cyl.
w T.H.) (exc. STA. WAG.).....
U-joint yoke trunnion bearing, snap . ,
63
CORVETTE,
64-65 Ser. 10 thru 30 ..................
all locations (finger dia. 894) ........
60-64 Ser. 20 w/ 3-SPD. H.D., 4-SPD.
(exc. 4/WD., D-D),
60-64 Ser. 20-30 (D-D) (exc. 3 SPD.)..... BOLT, joint fig. to park brk. drum(3/-24
60 -67
590485
591202
591791
Ser. 30 w/4-SPD .................
66-68 PASS., CORVETTE w/T.H. (8 cyl.),
68
Ser. 10 thru 30 w/4-SPD.
(exc. 4'WD) ..................
x
19
66
Ser. 20 w/ T.H. (exc. D-D),
67-68 Ser. 10-20 wr T.H. (exc. D-D) ..... BOLT, inter, prop, shaft front yoke ..... 3885538
5.572-5.586
9^2
07
©—J 967
67
68
40-54
66-68
68
41-55
55-59
60-68
63-67
ALL
Ser. 10 thru 30 w/New Process
4-SPD. (exc. 4/WD)............
Ser. 30 w/11000 lb. axle .........
BOLT, U-joint flange to park brake drum
BOLT, front flange ('/s-24 x 1'/a)
(serrated shoulder)
PASS., '2 TON
BOLT UNIT, trunnion.................
`NOTE Consists of 4 bolts and 2 plates.
PASS. w'T.H .
STRAP, prop shaft
Ser. 10 thru 30 w/4-SPD.
(exc. 4/WD)
STRAP, frt. prop. shaft and brg. supt....
1
4,
TON, UTILITY (1st Ser.),
';, 1 TON (2nd Ser.) .
U-BOLT (frt., inter., rear),
Ser. 10 thru 30
rr. wheel drive shaft U-joint (%-24)
CORVETTE
use w/finger dia. .773 and .775 ......
ALL, CORVETTE
U-BOLT, U-joint trunnion brg. (i6-18)
w/finger dia. .596
.................
..................
..................
..................
.............
..................
....................
...............
...................
..................
3910378
4
.35
3866676
3723489
4
1
.15
.47
3882979
2
.10
3920486
2
.20
2066840
A.R.
.30
1358938
A.R.
.30
3650631
A.R.
.55
5.595 NUT—WASHER, Propeller Shaft Pinion Flange
39-40 VE, VF, WD,
41-42 UTILITY,
46-55 %, 1 TON, UTIL. (exc. 2-SPD.)
(1st Ser.),
55-59 ',, 1 TON (2nd Ser.),
60-67 Ser. 20-30
57-59 Ser. 3E-3G w.'4/WD
39-55 2-SPD. (1st Ser.)
41-53 '' , 1 TON, UTIL, (exc. short COE)
46-53 2 TON (SBC), TY, UY, VY .......
53-55 CORVETTE
55-59 ALL (exc. 'i TON w/P/Trac.),
60-63 ALL, CORVETTE,
64-68 PASS., CORVETTE, Ser. 10,
64-68 G-10-20
58-59 '2 TON w/P/Trac.,
60-68 4/WD,
(P /Trac.)
......................
..............
................
...................
at pinion,
1
front axle (1 4-18)..................
pinion flange to dr. pinion,
front prop. shaft,
inter, prop. shaft (1 11 -20)............
( /4 -16)
...........................
3651486
513715
A.R.
1
.55
.55
.......................
((-16) (used on front axle on 4/WD )„
3887866
A.R.
.65
2346852
1
.50
2353021•
513716
1
1
.73
(5.545)
2130764
2
8.90
3866666
1
3.95
DRUM ..............................
DRUM ..............................
591614
3866677
1
1
7.80
10.95
SHOE,inner ........................
3694570
1
3.45
SHOE, outer .........................
FACING UNIT, brake shoe (inner
and outer) .........................
3694574
1
4, 85
3696497
1
2.95
DEFLECTOR, drum oil ...............
591609
1
1.85
LEVER, brake shoe ..................
3695829
1
8.00
LEVER, operating (offset w/shaft) .....
LEVER, operating (straight w/shaft)....
3695826
3695838
1
1
1.70
1.55
...................
54-55 CORVETTE
5.596
....................
( 4-16) (used on front on 4/WD) ......
shaft pinion brg. ('/s-14 x 5/8 thk.)
(Dana 30271) ....................
WASHER (1 5/ 6 O.D. x 494 4 I. D. x '/32) • • • • •
BRAKE PARTS, Propeller Shaft (Tru Stop)
41-50 ALL ...........................
SHOE and LINING ASSY. (stamped
C-704) ............................
5.605 PLATE ASSY., Trans. Parking Brake
68
Ser. 30 w '11,000 lb. axle .........
....................................
5.610 B RAKE PARTS, Propeller Shaft (Dual Shoe)
51-59
67
68
51-59
67
51-59
67
51-59
67
51-59
67
51-59
67
51-59
67
51-55
ALL,
Ser. 30 w/11000 lb. axle .........
Ser. 30 w /11,000 lb. axle.........
ALL,
Ser. 30 w/11000 lb. axle .........
ALL.
Ser. 30 w , 11000 lb. axle .........
ALL ...........................
Ser. 30 w/11000 lb. axle .........
ALL,
Ser. 30 w- 11000 lb. axle .........
ALL,
Ser. 30 w/ 11000 lb. axle .........
ALL (exc. COE),
Ser. 30 w/11000 lb. axle .........
COE ...........................
' -1967
Division
5.586-5.610
Chevrolet Motor
903
67
Ser. 30 w/11000 lb. axle ......... LINK UNIT, operating
3696895*
*NOTE: Consists of 1 Link, 1 Adjusting Nut, 1 Lever Spring, 1 Special Washer, and
1 Hex. Nut.
51-55 1 TON, UTILITY (1st Ser.) (exc,
LINK, lever outer connecting (angle on
COE)
one end)
3695834
51-55 1 TON, UTILITY (1st Ser.)(exc.
COE)
LINK, lever inner connecting
3695828
51-59 ALL,
67
Ser. 30 w/11000 lb. axle ......... SUPPORT, adjusting bolt
591678
51-58 ALL,
Ser. 30 w/11,000 lb. axle......... SPRING, outer shoe to adj. bolt support . 3695836
67
51-58 ALL,
67
Ser. 30 w/11000 lb. axle ......... SPRING, shoe lever
3695830
51-55 1 TON, UTILITY (1st Ser.) (exc.
SPRING, lever return (6 23/ 2 free lengthCOE) ........................
20 coils) .......................... 3695835
68
Ser. 30 W/11,000 lb. axle ........ SPRING, shoe adi. screw
3707417
51-58 ALL,
67
Ser. 30 w/11000 lb. axle ......... LOCK, shoe lever
2084234
51-58 ALL
LOCK, brg. ret, to outer shoe
359380
................
........................
........................
..........................
..........
.............
1.00
1
.40
1
.40
1
1.20
1
..................
1
(5.026)
.15
1 (4.827)
1
(.5.02U1
..............
....................
..........
...........................
1
1
1
.08
(5.056)
5.615 BRAKE PARTS, Pro peller Shaft (Band Type)
55-59 %, 1 TON (2nd Ser.)
60-66 Ser. 20-30 w/3-SPD., 4-SPD.......
55-59 3/, 1 TON (2nd Ser.),
60-64 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T.,
65-66 Ser. 30 w/H.D. 3-SPD., 4-SPD.....
3
55-59 /q, 1 TON (2nd Ser.),
60-64 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T.,
63
Sec, 10 w/ 3=SID, H.D.
65
Ser. 30 w/H.b. 3-SPD.,
66
Ser. 30 w/4-SPD
3
55-59 /„ 1 TON (2nd Ser.),
60-62 Ser. 20-30 (exc. 3-SPD. H.D.,
4-S PD., H. T.),
63
Ser. 10 w /3-SPD. H.D.,
63
Ser. 20 w /3SPD. H.D. (exc. D-D),
63-65 Ser. 20-30 w/4-SPD .
64-65 Ser. 20-30 w3-SPD. H.D.........
55-59 '/a, 1 TON w/4-SPD. (2nd Ser.),
60-64 Ser. 20-30 w/4-SPD
65-66 Ser. 30 w '4-SPD
55-57 D-D w/4-SPD. (2nd Ser.)..........
55-59 %/<, 1 TON (2nd Ser.),
60-66 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
63
Ser. 10 w/3-SPD. H.D.,
65-66 Ser. 30 w/4-SPD
55 . 59
1 TON w/3-SPD. H.D. (2nd Ser.),
60-62 D-D w /3-SPD, H.D.,
63-64 Ser. 20-30 (D-D) w/3-SPD. H. D. ...
55-59 3<, 1 TON w/4-SPD. (2nd Ser.),
60-66 Ser. 20-30 w/4-SPD.,
65-66 Ser. 30 w/4-SPD .................
55-62 ' , 1 TON w ' H.T. (2nd Ser.) ......
57-59 '/,, 1 TON w/4-SPD„
60-64 Ser. 20-30 w/4-SPD.,
65-66 Ser. 30 w/4-SPD .................
58-62 D-D w/H. T .....................
60-64 Ser. 20-30 w/3-SPD. H.D.,
65-66 Ser. 30 w/4-SPD .................
.................
.............
..............
.................
.................
.......................
3713788
1
6.70
.....................
3713790
1
7,50
3713777
2
.20
3713780
1
.05
SPRING, upper adj. bolt (3 coils1'/, O.D.)
ROD (lever) 9 °4 b
..........................
......................
3713779
3715866
1
1
.30
(4.8261
CAM, operating (1 5/ b ctr, to ctr. holes) , ,
3713775
2
.20
LINK, spacer (2 5/16 ctr. to ctr. holes) ....
3721041
1
.30
LINK, spacer (3 13/ 6 O.L.)..............
LINK, spacer (2 3/q O.L. ) ............. . .
3713773
8615651
1
1
.07
.30
LINK, spacer (2 75/ 6 ctr. to ctr.).........
LINK, spacer (32144 O.L.)..............
3735174
8617051
1
1
.15
.75
LINK, spacer (3 s/6 ctr. to ctr.) ........
3774919
1
.30
DRUM (8 x 2 1/)
BAND, w/facing
SPRING, band return (9 coils—'/a O.D.) ,
SPRING, band center return (7 coils2 O.D.)
...........................
5.610-5,615
904
C-1967
............... .
8617004
1
27.90
...........
3713772
1
.45
BOLT, center adj. (5( 6 -18 x 1 5/e) .......
3713766
1
.20
..........................
BOLT, lower
3718081
1
.15
..........................
SPACER, upper adj. bolt spring .
......
3713778
1
.35
...........
3713776
1
.70
PIN, upr. adj. bolt clevis ( Y dia.) ......
PIN, lever pull rod end eye clevis
( 3/8 x 1343) ......... • .... • • ..... •
3713743
1
.15
9421090
1
PIN, upr. adj, bolt clevis ( 34 die.) ......
PIN UNIT, brake shoe hold down .......
SCREW w/nut, brake shoe adi. pivot ....
3735176
3924177
3915010
1
1
1
.15
.25
.50
FACING UNIT, w/83 x 234 lining.......
3731573
1
5.25
3
/4 , 1 TON w/H.T. (2nd Ser.) .... .
1 TON w/H. D., H.T. (2nd Ser.),
Ser. 20-30 w/3-SPD. H.D., H.T.,
Ser. 30 w/4-SPD.,
Ser. 30 w/11000 lb. axle .........
3, 1 TON (2nd Ser.),
Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T.,
65-66 Ser. 30 w/4-SPD
55-59 '/a, 1 TON (2nd Ser.),
60-68 Ser. 20-30 w/3-SPD., H.D. 4-SPD.
H.T
3
5S-59 4, 1 TON (2nd Ser.),
60-65 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
H.T
55-59 '/4 , 1 TON (2nd Ser.),
60-63 Ser. 20-30 w/3-SPD. H.D., 4-SPD.,
65-66 Ser. 30
55-57 34, 1 TON (2nd Ser.),
58-59 'i,, 1 TON (exc. 4-SPD.),
60-64 Ser. 20-30 w/3-SPD. H.D., H.T.,
65-66 Ser. 30 w/H.D. 3-SPD.
ALLALL
55-62
55-59
60-64
65-66
67
55-59
60-64
.................
.........................
...........
...........................
57-59
60-64
65-66
68
68
55-59
55-59
60
BRACKET, w/link .. .
34,
34 , 1 TON w/4-SPD.,
Ser. 20-30 w/4-SPD.,
Ser. 30 w /4-SPD
Ser. 30 w/11,000 lb. axle.........
Ser. 30 w/ 11,000 lb. axle.........
34 TON w/H.D., H.T. (2nd Ser.),
1 TON (2nd Ser.),
Ser. 20-30 (exc. H.T.)............
.................
BOLT, upper adj. (734 O.L.)
adj.
(Y4 -28 x 24)........
EYE, adj. rod end (1 3/4 O.L.)
(8.942)
5.623 BELLOWS, 2 -Speed Axle, Gear Shift
39-46 2-SPD. w/Mech. Shift............
cable, 5% overall
...................
592055
2 (4.834)
5.635 DIAPHRAGM ASSY. and PARTS, 2-Speed Axle, Vacuum Shift
46-55
46-59
46-55
46-55
46-59
47-59
46-59
46
47-59
46-55
46-55
46-59
46-59
46-59
46-55
46-55
46-55
46-55
..................
ALL (1st Ser.)
ALL ........................ • .
ALL (1st Ser.) ..................
ALL (1st Ser.) ..................
ALL ...........................
ALL ...........................
ALL ...........................
ALL ...........................
ALL ...........................
ALL (1st Ser.) ..................
ALL (1st Ser.) ..................
ALL ...........................
ALL ...........................
ALL ...........................
ALL (1st Ser.) ..................
ALL (1st Ser.) ..................
ALL (1st Ser.) ..................
ALL (1st Ser.) ..................
5.636
46-47
48-55
49-55
48-53
48-55
49-55
complete ..........................
CYL. and BOSS. ASSY. ...............
SHELL and SEAL ASSY...... ........
ROD ASSY., piston ...................
DIAPHRAGM ........................
SPACER, small ................... ..
SPACER, push rod ...................
RING, snap (round section) ............
RING, snap (square section) ...........
SEAL, mounting......................
SEAL, piston rod.....................
SPRING, push rod....................
WASHER, stop .......................
BOLT (hex. hd. 5/ 6 -24 x 534)...........
SLEEVE, mounting ...................
SHIM, sleeve (.003) ...................
SHIM, sleeve (.030) ...................
GASKET, rubber (oil resistant).........
3682150
1
3847055
1
1
3847056
3847057
1
1
3847058
3847060
1
1
2212963
3847061
1
1
2270867
3682608
1
2212953
1
2212962
1
3847062
2
3847063
1
3682607
1
2212968 A.R.
3685176 A.R.
1
3704432
23.75
3.30
7.50
5.95
3.05
.20
.35
.10
.10
.35
1.50
.65
.12
.75
5.95
.05
.15
.05
LEVER-COVER-ROD-SPRING, 2 -Speed Axle, Vacuum Shift Selector
ALL ...........................
ALL (1st Ser.) ..................
ALL (1st Ser.) ..................
ALL (exc. COE, FFC) ...........
ALL (1st Ser.) ..................
ALL (1st Ser.) ..................
valve (painted black) ...............
valve rod..........................
COVER, valve lever indicator..........
ROD, valve upr. (19% long) ............
SPRING, valve upr. rod (4% coils) ......
SPRING, valve lwr. rod (27 coils) ......
3682970
1
1.15
3687084 A.R.
.40
3710861
1
1.15
3687077
1
.75
3690299
1
.06
3658835
1 (8.081)
7
hevro
Chevrolet
let
Division
5.615-5.636
905
5.638 HOS E—ELBOW—CLAMP, 2-Speed Axle, Vacuum Shift
46-55 ALL (1st Ser.) ..................
46-53 ALL,
54-55 UTILITY(lst Ser.) (exc. COE) ....
ALL ALL ...........................
ALLALL ..........................
5.640
46-55
67
46-55
54-55
54-55
67
67
A.R.
ELBOW, sel. valve to shifter cyl. ( ?/e) • • •
CLAMP,1 control selector valve hose (°.4 6 )
CLAMP, 4- 5/, diameters...............
3686414
187011
2494772
A.R.
.45
A.R.(1.166)
A.R.(1.166)
1.40
(329/32 O, L,) ........................
3687054
1
11.50
VALVE ASSY. and PARTS, 2-Speed Axle, Vacuum Shift Check
ALL (1st Ser.) ..................
Ser. 30 w/11,000 lb. axle .........
2 TON (1st Ser.),
1'2 TON w/Brake Booster (1st Ser.)
1' 4 TON (6 cyl.) (1st Ser.) (exc.
BrakeBooster) ................
group 4.955 ...................
grou
p4.955 ...................
group4.955........._.........
Ser. 30 (D-D) ...................
Ser. 30 (D-D) ...................
5.803
3682980
VALVE ASSY., Vacuum Shift Selector
48-55 ALL (1st Ser.) ,,,,,,,,,,,,,,,,,,
5.645
sel. valve 1 to shifter cyl. pipes
3
( /e x 16 /)........................
.......... ....... .................
.......................... ...
2377963 A.R.
88691460 1
2.75
7.25
TEE ASSY ...........................
3847069
1
3.55
TEE ASSY...........................
3847412
1
SEAL, valve (Bendix 378907) ..........
3764290
.15
KIT,repair ..........................
2381777
.75
KIT, valve repair .....................
SLEEVE, control valve ...............
FITTING, check valve ................
3764293
3752703
3752704
1
1
(4.931)
.75
.40
.85
WHEEL—AD APTER—PIN—HAMMER ASSY., Front or Rear
This section contains Model Usage and Prices for Passenger, Corvette and Truck wheels.
For Wheel size, Tire size and other added description, see the following charts. These two
sections should be used in conjunction with one another to determine the correct wheel.
PASSENGER, CORVETTE AND Y2 TON
39-48
49-55
46-55
60-65
46-48
47-50
55-56
60
49-53
54-62
54-62
63-67
57-60
61-68
57-64
62-66
54-62
63
56-59
57-59
59-60
59-60
61-62
63-68
60-68
61-68
63-64
63-65
63-68
PASS., '/z TON,
'z TON (1st Ser.) ................
'i TON,
Ser. 10 .........................
PASS.,
' 2 TON,
'2 TON (2nd Ser.),
Ser. 10 .........................
PASS., CORVETTE (exc.
POLICE),
POLICE (1st design),
PASS. (exc. POLICE)............
PASS. (exc. KINGSWOOD),
PASS. (exc. STA. WAG.) .........
CORVETTE (exc. knock off whls.),
POLICE (2nd design) ............
'2 TON,
Ser. 10 (4/WD) (1st Ser.) .........
12
TON .........................
'i TON .........................
SDL., PDL.,
KINGSWOOD,
STA. WAG.,
PASS. (exc. disc brakes) ........
Ser. 10 .........................
Ser. 10, G-20 ...................
PASS (exc. STA. WAG.)..........
CORVETTE w/knock off wheels ..
Ser. 10 ........................
....................................
3693214
15.50
...............:....................
2407805.
15.59
....................................
....................................
2251385
3687980
13.75
13.90
(15 x 5K) ..........................
3834956
10.95
3870769
11.25
......................
3838080
16.40
....................................
.......................... . . . . . . ....
....................................
2324150
3724684
2354750
16.90
20.25
15.95
(14 x 6JK) ........................
...
.......
(15 x 5.5K) ........................
(chrome) (14 x 5J) ..................
(vaned aluminum) ...................
(16 x 5JK) ........................
3870768
2394627•
2470547
3844373
3868768
2440830
12.65
(14 x
5
J) .........................
5.638-5.803
906
11.30
25.25
75.00
18.15
©_1967
63
64
64-68
64-66
68
65-66
65-66
67
65-68
66
67
67-68
67
PASS. (exc. STA. WAG.),
PASS . ...................... ..
G-10 ..........................
G-10,
G-10
CORVETTE (exc. knock off wheels)
G-10 (2nd design),
......
G-10.
Ser. 10 (2nd design)
CORVETTE w/knock off wheel ...
Ser. 10 .........................
G-20 ...........................
PASS., CORVETTE w/disc brakes
(exc. Alum, wheel),
PASS. w/disc brakes
PASS. (exc. STA. WAG.Jw/disc
brakes,
CORVETTE
CORVETTE
CORVETTE w/knock off wheels , ,
CORVETTE w/knock off wheels , ,
CORVETTE w/knock off wheels
CORVETTE
..........................
.............
.......... .
68
67
68
67
68
68
68
63-66
63-66
63-66
63-66
....................
....................
....................
(chrome) (14 x 6JK)................
(14 x 5J K) ........................
3844379
3872276
36.40
10.95
(painted) (13")
(15 x 5.50K)
....................
.......................
3860957
3869156
10.50
16.75
(14 x 6.00JK) ......................
(15 x 5.5F)
(15 x 6L)
(16.5 x 8.25)
(16.5 x 6.00).......................
.......................
..........................
.......................
3871919
2472988
3877236
3851350
3887746
11.25
15.90
82.45
55.50
........................
3901698
18.50
(15 x 6JK)
........................
.................
.........................
........................
......................
.....................
(15 x 5JJ)
aluminum (15 x 6L)
(15 x 5JJ)
(15 x 7JK).........................
(15 x 6JK)
ADAPTER, left
ADAPTER, right
PIN, wheel adapter wheel pilot.........
HAMMER ASSY., knock off wheels......
TRUCK
39-46 YB, YD, WA, WB, YR, YS, MR, MS,
MT, OE, OF, PV, PW, COE .....
', 1 TON,
46
60-67 Ser. 20-30 (exc. 4/WD, D-D),
62-67 Ser. 20 (4/ WD) (2nd design) .......
46-53 2 TON,
53-54 1'4 TON (1st Ser.) (exc. SBC) .....
46-55 1 TON,
D-D,
55
63-67 Ser. 30
46-55 1'i TON (1st Ser.)
47-55 '4', 1 TON,
60-67 Ser. 20 (D-D),
60-63 Ser. 20 (4/WD) (1st design),
60-63 Ser. 30 (D-D) (1st design) ........
47-55 ', TON (1st Ser.),
J (2nd Ser.),
55
60-65 Ser. 20(4!WD) ................
48-53 2 TON .........................
51-53 2 TON,
1 TON w/H.D ..................
53
55-62 3, TON .........................
54-55 UTILITY (1st Ser.) ..............
54-55 UTILITY (1st Ser.) ..............
54-55 2 TON (1st Ser.) ................
56-67 D-D, 1 TON w/dual wheels .......
56-59
, 1 TON w/single wheels,
60-61 Ser. 20 (4/WD, D-D),
60-67 Ser, 30 (D-D) ...................
56-59
TON w/duals (exc. D-D) .......
56-57 ' 4 , 1 TON (exc. duals, D-D),
58-59 '-a, 1 TON (exc. duals),
60-67 Ser. 20 (D-D),
60-62 Ser. 20 (4 `WD) (1st design) .......
60-67 Ser. 20-30 (D-D) ................
60-64 Ser. 20 (exc. D-D, 4/W D) .........
60-67 Ser. 20-30 (exc. 4/WD, D-D),
63-67 Ser. 20 (4/WD) ..................
60-67 Ser. 20-30 (exc. 4/WD, D-D, dual
wheels,
62-67 Ser. 20 (4/WD) (2nd design) .......
60-68 Ser. 30 w,'dual wheels (exc. D-D) .
(exc. Y2
16.40
3901696
3910730
82.45
3928262 A.R.
3910799 A.R.
3928267 A.R.
2
23.50
3847763
3847764
2
23.50
.38
3847767 10
1 (8.821)
3859067
TON)
....................................
3651623
29.75
2394629•
23.25
3682082
37.30
......................... (painted) ..........................
............... ....................................
2227827•
3682076
24.90
29.75
....................................
2227828•
23.25
....................................
....................................
2495740
3696712
22.50
40.15
....................................
....................................
....................................
....................................
....................................
....................................
3696012
2307808•
2305317•
3703874#
37052264
23396130
37.30
26.50
38.75
38.25
41.25
31.00
....................................
....................................
2339612
3724683
27.25
24.50
....................................
....................................
....................................
3724682
2471588•
2413571
20.50
25.00
15.95
....................................
2394677
27.25
....................................
....................................
2394628
23946260
20.50
24.50
....................................
....................................
-1967
5.803
907
61-64
63-64
62
63-65
63-67
64-67
64-66
64-68
64-67
65
66-68
66-67
68
67
68
Ser. 30,
Ser. 20 (exc. 4/WD, D-D) .........
....................................
Ser. 20 (exc. D-D),
Ser. 10 .........................
....................................
Ser. 30 (exc. D-D),
Ser. 20 (exc. 4/WD, D-D) .........
(painted) ..........................
Ser. 20-30 (exc. D-D) ............
....................................
Ser. 20 (exc. D-D) ...............
(16 x 6G) ..........................
Ser. 20 (exc. D-D) ...............
....................................
Ser. 20 (exc. D-D, 4/WD) .........
....................................
Ser. 20-3 0 (CONY.),
Ser. 20 (D-D, 4/WD),
Ser. 20 (4/WD) ..................
....................................
Ser. 30 (exc. 133 W/B),
Ser. 30 (CONY.) w/11,000 lb.
axle (exc. 157 W.B.) ...........
....................................
67
Ser. 30 w/11000 lb. rr. axle,
68
Ser. 30 (CONY.) w/11,000 lb.
rr. axle ......................
....................................
67-68 Ser. 20-30 (exc. D-D),
68
Ser. 20 (D-D) ...................
....................................
67-68 Ser. 20-30 ......................
....................................
#NOTE: Also used on 1956-1962 models equipped with tube tires.
2428262•
24078050
2458670
2395844•
3907297
3860964
2495738
•
26.50
15.95
27.25
26.50
29.75
29.75
22.50
3851350
55.50
3729813
30.75
3815680
3913147
3913151
24.75
22.50
29.75
NOT SERVICED WHEELS
48-51
51-52
2 TON (exc. SBC) ...............
2 TON .........................
....................................
....................................
5.803
908
3695970
3693380
©-1967
SPOKE
HOLES
HUB
HOLE
HUB
HAND HOLES
ILE
8 STUD VENTILATED
DISC WHEEL
6 STUD
STAMPED DISC WHEEL
WHEEL RIMS
Following illustrations are examples of types of rims which are part of assemblies. The rims are not
SIDE RING
serviced separately and are either welded or riveted to the wheel disc.
RIM WIDTH
(SERVICED SEPARATELY)
AMP R NG
5°
P P
+
5°
Y)
5°
sERVI
SIDE RING
1 5°
1 5°
-
RIM WIDTH
RIM WIDTH
5°
(SERVICED SEPARATELY)
ONE PIECE
TWO PIECE
0
Two-piece rims: Have a 5 taper bead seat and are
used only for tube tires. RPO wheels of 6.0" or 6.5"
ri m widths are of 2-piece design.
One-piece rims: 5.25" or larger rims have a 15"
taper bead seat, and are used for tubeless tires,
Smaller rims have a 5° taper bead seat, and are
used for both tubeless and tube tires.
THREE PIECE
Three-piece rims: Have a 5° taper bead seat and are
used only for tube tires. RPO wheels of 7.0" or 7.5"
ri m widths are of 3-piece design.
^ ^ RIM WIDTH
^V
RIM
NOTE: Wheel part numbers do
not include clamp or
side ring.
NOTE: Offset is determined by
measuring the distance
from the centerline of
the rim to the inner
side of the wheel disc.
WHEEL DISC
R OF RIM
-
OFFSET
I
PASSENGER, CORVETTE AND Y2 TON
No.
No.
Hub Cap
Construction
Wheel
Size
Offset
1 Piece (welded)
1 Piece 0Welded)
1 Piece (Welded)
1 Piece (Welded)
1 Piece (8 elded)
13 x 5.55
14 x 5J
14 x 5 5
14 x 5J
14 x 55
1
1
1 Piece (Welded)
14 x 6.00 5 K
1
1 Piece (Welded)
I Piece (Welded)
1 Piece (Welded
1 Piece (Riveted)
14 x 6JK
14 x 6JK
14 x 6J
15 x 5K
3'l6
1/6
!16
°/6
1 Piece (Riveted)
15 x 5K
9/a
°/a
°/16
9/16
Spoke
or
Tire Size
Attach.
Clips
Tire
Type
6.50 x 13, 7.00 x 13 ...........
7.35 x 14 .....................
7.00 x 14, 7.50 x 14, 8.00 x 14 ..
7.00 x 14, 7.50 x 14, 8.00 x 14 ..
7.35 x 14 .....................
0
0
0
0
0
Both
Tubeless
Both
Both
Both
5
5
5
5
5
386095'
3872276
3844373
3849574
3870769
7.00 x 14 .....................
0
Tubeless
5
3871919
8.00 x 14 .....................
7.50 x 14, 8.00 x 14, 8.50 x 14 ..
8.25 x 14, 8.55 x 14 ...........
5.50 x 15, 6.00 x 15, 6.40 x 15,
6.50 x 15, 6.70 x 15, 7.10 x 15
5.50 x 15, 6.00 x 15, 6.40 x 15,
0
0
9
Both
Both
Both
5
5
5
5
Tube
6.50 x 15, 6.70 x 15, 7.10 x 15,
7.50 x 15 ..................
Lug
Holes Wheel
Clamp
Side Hand
Ring
Ring Holes
.......
.......
.......
.......
.......
.......
.....
.......
... - - ..
4
3844379
3849573
3870768
.......
.......
... . ...
.......
4
4
5
368 7 980'
.......
.......
4
4
4
4
3
Tube
6
.......
4
15 x 5K
v/a
6.70 x 15, 7.10 x 15 ...........
0
Both
5
3689039A
3834956
.......
1 Piece (Riveted)
1 Piece (Welded)
15 x 5K
%6
7.75 x 15 .....................
0
Both
5
3869156
.......
.......
4
1 Piece (8eldec)
1 Piece (Riveted)
15 x 555
15 x 5.5F
1/a
None
15 x 7.75, 15 x 8.15 ...........
7.00 x 15, 7.50 x 15 ...........
0
6
Both
Tube
5
6
3901696
2407805
.......
3778058
.......
2406653
5
4
-1967
4
5.803
909
Construction
1 Piece (Riveted)
Wheel
Size
1 Piece (Riveted)
1 Piece (Welded )
15 x 5.5 K
15 x 5.5K
15 x 5.5K
Piece (Riveted)
1 Piece (Cast)
1 Piece (Welded)
1 Piece (Welded)
1 Piece (Welded)
1 Piece (welded)
1 Piece (Riveted)
1 Piece (Riveted)
1 Piece (Riveted)
1 Piece (Riveted)
1 Piece (Riveted)
1 Piece (Riveted)
15 x 5.5F
15 x 6L
15 x 6L
15 x 6JK
15 x 6JK
15 x 7JK
16 x 4.50K
16 x 5K
16 x 5K
16.5 x 8.25
17.5 x 5.25
17.5 x 5.25
Offset
°/y
'/6
9/6
None
'/6
0
9/32
9/a
7/6
'.'1'6
27/32
None
t'/6
No.
Hub Cap
Attach.
Tire
Clips
Type
Tire Size
6.70 x 15, 7.60 x 15 ...........
6.70 x 15, 7.10 x 15 ...........
6.70 x 15, 7.10 x 15, 7.75 x 15,
8.15 x 15 ...................
7.00 x 15 ....................
7.75 x 15 .....................
7.75 x 15 .....................
15 x 7.75, 15 x 8.15 ...........
8.15 x 15 ...................
.............................
5.50 x 16, 6.00 x 16, 6.50 x 16 ..
6.00 x 16, 6.50 x 16 ...........
6.00-x 16, 6.50 x 16 ...........
7.00 x 15 .....................
7 x 17.5, 8 x 17.5 .............
7 x 17.5, 8 x 17.5 ...........
No.
Lug
Holes
Wheel
Clamp
Ring
Side
Ring
No.
Spoke
or
Hand
Holes
3
0
Both
Tube
6
5
2354750
3838080
.......
.......
.......
.......
4
4
0
9
0
0
0
0
0
3
3
0
4
6
6
Tubeless
Tube
Both
Both
Both
Tubless
Tubeless
Tube
Both
Both
Tube
Tubeless
Tubeless
6
6
0
5
5
6
5
6
6
6
8
6
6
2470547
2472988
3877236
3868768
3901698
3928267
3910799
3693214
2324150
2440830
3851350
3724684
2394627
.......
3778058
.......
.......
.......
.......
.......
.......
.......
.......
.......
.......
.......
.......
2406653
.......
.......
.......
.......
.......
.......
.......
.......
.......
.......
.......
4
3
4
0
0
4
6
0
0
0
0
4
4
0
0
0
4
4
4
4
4
0
0
0
0
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tubeless
Tubeless
Tubeless
Tube
Tube
Tube
Tubeless
Tubeless
Tubeless
Tubeless
Tube
Tube
Tube
Tube
Tubeless
Tubeless
Tubeless
Tubeless
Tube
Tube
Tube
Tube
Tube
Tube
Tube
Tube
8
8
8
8
6
8
8
8
8
8
8
6
8
8
8
8
8
8
8
8
8
8
8
10
8
8
8
8
10
10
10
10
10
10
10
10
10
2413571
2495738
2495740
2407804
2407805
2307808
2428262
3848648
2458670
3860964
3907297
3887746
3913147
3913151
3851350
2227828
2394629
3724682
2394628
3724683
2394626
2395844
2471588
3815680
2227827
2339612
23946'7
2339613
3729813
36820765
3651623
36820825
2305317
36960125
37038741
36967125
37052261
3778058
.......
.......
3778058
3778058
.......
.......
.......
.......
.......
.......
.......
.......
.......
.......
3681788
3681788
.......
.......
.......
.......
3681788
3681'88
3682062
3682062
.......
.......
.......
.......
3696716
.......
3696716
3696716
.......
.......
3696716
3696716
2406653
2495743
2495743
''406653
2406653
2059902
2059902
2059902
2059902
3906582
2219056
.......
.......
.......
.......
2306846
2306846
.......
.......
.......
.......
2284287
2284287
2306847
2306847
.......
.......
.......
.......
3707075
2039648
3697364
3697364
2274258
2274258
3704948
3704948
5
4
4
4
4
4
4
4
TRUCK (exc. % TON)
3 Piece (Riveted) 15 x 5.50F
2 Piece (Riveted) 15 x 5.50
2 Piece (Welded)
15 x 5.5
2 Piece (Weld)
16 x 5.50F
2 Piece (Weld)
16 x 5.50OF
1 Piece (Riveted) 16.5 x 6.00
1 Piece (\t elded)
17.5 x 5.25
1 Piece (Ri v eted) 19.5 x 5.25
3 Piece (Ri v eted) 20 x 5.0
2 Piece (Riveted) 20 x SOS
2 Piece (Riveted) 20 x 6,0
*NOTE: 2 29132 dia. hub hole.
5NOTE: 4%
dia. hub hole.
32/
ANOTE:
dia. hub hole.
t
5
\OTE: 5 5) dia. hub hole.
1
1
7.00 x 15, 7.50 x 15 ...........
7.00 x 15, 7.50 x 15 ...........
8
7.00 x 15 ...................
%
7.00 x 15, 7.50 x 15 ...........
None 7.00 x 15, 7.50 x 15...........
4%
6.50 x 16 .....................
16 x 6.50 ....................
3 15/6
5
7.00 x 16, 7.50 x 16, 6.50 x 16 ..
5
7.00 x 16, 7.50 x 16, 6.50 x 16 ..
1'/8
7.00 x 16, 7.50 x 16 .........
7.00x 16, 7.50 x 16 ...........
l/ 7.00
5/
8.00 x 16.5 .................
1%
8.00 x 16.5 .................
1%
8.75 x 16.5, 9.50 x 16.5......
21/32
7.00 x 15, 10.16.5 .............
'/6
7.00 x 17, 7.50 x 17 ...........
13/
7.00 x 17, 7.50 x 17 ...........
None 7 x 17.5, 8 x 17.5 .............
1 518
7 x 17.5, 8 x 17.5 .............
4 3/ 6
7 x 17.5, 8 x 17.5 .............
4 1/
7 x 17.5, 8 x 17.5 ...........
1'/b
7.50 x 17, 7.00 x 17 ...........
'/6
17 x 7.00, 17 x 7.50 ...........
43/a
7.
x 18 .....................
4%
7.00 x 18, 7.50 x 18 ...........
'16
8 x 19.5 ......................
1%
8 x 19.5 ......................
4 1& (6
8 x 19.5 ......................
4 13/y
8 x 19,5 .....................
43/4
6.50 x 20, 7.00 x 20 ...........
5'/
7.50 x 20, 8.25 x 20 ...........
5%
7.00 x 20, 7.50 x 20, 8.25 x 20 ..
5%
7.00 x 20, 7.50 x 20, 8.25 x 20 ..
53/,
7.00 x 20, 7.50 x 20, 8.25 x 20.
53%a
7.00 x 20, 7.50 x 20, 8.25 x 20 , ,
558
8.25 x 20, 9.00 x 20 ...........
8.25 x 20, 9.00 x 20 ...........
5%
5.803
0
4
4
0
0
0
0
0
0
0
0
0
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
4
4
4
5
5
8
5
5
5
5
5
5
©-1967
910
NOT SERVICED WHEELS
NOTE: The Following Wheel Assemblies are not serviced and are shown only for Clamp and Side Ring usage. When replacing obsolete Wheel by current Wheel corresponding Clamp and Side Ring must be used.
Construction
2 Piece (Riveted)
1 Piece (Riveted)
3 Piece (Riveted)
Wheel
Size
20 x 6.0
20 x 6.OT
20 x 6.5
No.
Hub Cap
Attach. Tire
Offset
Tire Size
Clips
Type
7.50 x 20, 8.25 x 20 ...........
0
Tube
5%
51/2
8.25 x 20, 9.00 x 20 ...........
0
Tube
8.25 x 20, 9.00 x 20 ...........
0
Tube
5%
Lug
Holes Wheel
10
3693380
10
3686852
10
3695970
Clamp
Ring
.......
.......
3695975
No.
Spoke
or
Side Hand
Ring Holes
3693385 5
....... 5
3695974 5
5.805 WEIGHT, Wheel Balance
TYPE B
60-68 Ser. 10, G-10, 20 ................
60-68 Ser. 10, G-10, 20 ................
60-68 Ser. 10, G-10, 20 ...............
60-68 Ser. 10, G-10 ...................
60-68 Set. 10, G-10 ...................
58-59 PASS., CORVETTE .............
60-61 Ser. 10 (exc. D-D),
60-68 Ser. 10 thru 30 ................ .
60-68 Ser. 10 thru 30 ..................
60-68 Ser. 10 thru 30 ..................
60-65 Set. 20-30,
66-68 Ser. 30,
67-68 Ser. 20 (exc. D-D) ..............
60-66 Ser. 20-30,
67
Ser. 30,
67-68 Ser. 20 (exc. D-D),
68 Ser. 30 (exc. D-D) ..............
63-67 CORVETTE ....................
63-67 CORVETTE ....................
63-67 CORVETTE ....................
5.806
TYPE D
(1 1/2oz.) (size cast on weight) .......
9421502
A.R.
.15
(1 oz.) (size cast on weight) .........
9421504
A.R.
.15
('5 oz.) (size cast on weight).........
9421506 A.R.
.15
(2 oz.) (size cast on weight) .........
9421508
A.R.
.20
(215 oz.) (size cast on weight)........
(3 oz.) ............................
9421510 A.R.
3758709 A.R.
.19
.24
(1 oz.) type B ......................
(2 oz.) type B .....................
(4 oz.) type B ......................
3771620 A.R.
3771621 A.R.
3771622 A.R.
.20
.25
.35
(2 oz.) type D .....................
3771629 A.R.
25
(4 oz.) type D ...................... 3771630 A.R.
quick take-off ('/ oz.) ............... 3830798 A.R.
quick take-off (1 oz.) ............... 3830799 A.R.
quick take-off (2 oz.) ............... 3830801 A.R.
35
15
15
20
HUB—SPINDLE—FLANGE ASSY., Rear Wheel
40-50 UTILITY .......................
splined type (forged hub) (use
3682389 Bolt) ....................
*NOTE: Use only w/Hypoid Gear Type 2 -SPD. AXLE in 1946. When replacing
one bolted type hub w/one spline type hub 3685195 replace axle
shaft together with 1-3689081 Conversion Kit.
41-42 2-SPD ..........................
(use 5238559 Hub Bolt),
46
2-SPD ..........................
(use 3682153 Hub Bolt) (cast 3668100)
TNOTE: 3668100 to be used only w/Spur Gear Type 2-SPD. Axle.
46-59 3/4 1 TON ......................
(cast iron hub—'/s flange) (axle shaft
1
60-67 Set. 20 (D-D) ...................
bolt holes 4-13 threads) (cast
60-62 Ser. 20 (4/WD) (1st design)
........................
§NOTE: 3697045 Bolt ( 1/2 -20 x 2) must be used with 3697044 Hub.
51-53 UTILITY .......................
splined type (cast hub- 594 4 flange)
54-55 1'/2 TON (1st Ser.) (exc. 2-SPD.) ...
(three 5/ 6 .18 tapped holes) (cast
3697042) .......................
ONOTE: 3697043 Bolt ( 5/s -18 x 3'/ 6 ) must be used with 3697042 Hub.
v-1967
3685195*
2
2 5.2 5
3668100T
2
22.60
3697044§
2
22.50
36970420
2
27.25
5.803-5.806
911
54-55 1'/2 TON w/2-SPD. (1st Ser.) ......
splined type (cast iron hub- 59/64 flange)
54-55 2 TON (1st Ser.)
(stmp'd. 3702299)
3702299
$NOTE: 3705785 Bolt (5/8 -18 x 2 27/32 ) must be used w/3702299 Hub.
60-62 Ser. 20-30 (exc. 4/WD, dual
wheels),
60-62 Ser. 20 (4/WD) (2nd design),
63-68 Ser. 20 (exc. D-D),
63-66 Ser. 30 (exc. dual wheels),
67-68 Ser. 30 (exc. 11,000 lb. axle) .....
8 bolts (6',;,, O.L.)
3760190
60-62 Ser. 30 w'dual wheels
8 bolts (5 31/37 O.L.)
3759854
63-68 Ser. 20 w'dual wheels (exc. D-D),
63-68 Ser. 30 w % dual wheels
3819779
2403660
67
Ser. 30 (exc. 133 W.B.) (w/11000
lb. axle)
59/ fig. thk.
3714727
63-65 CORVETTE wdisc. brakes ...... SPINDLE, w/bolts
3820239
65-68 CORVETTE w/disc brakes ....... SPINDLE, w/bolts
3872476
63-68 CORVETTE
FLANGE ASSY., rear wheel spindle
3839830*
*NOTE: When using 3839830 on 1963 1st design models it will be necessary to use
washer 3830252.
................
...............
2
26.75
2
2
22.75
22.75
2
1
22.75
29.50
2
2
2
26.25
23.95
23.95
13.45
2
3.35
A.R
12.20
2
14.75
2
2
2
2
2
2
2
4
31.75
22.75
20.95
24.75
17.95
20.75
20.75
11.25
2
12.15
..................
.................
..................................
....................................
.....................
.......................
...................
...................
....................
....
...........
...........
K IT, Rear Wheel Hub Conversion
40-47 UTILITY(exc. 2-SPD.),
46-47 2-SPD. w/hypoid gears...........
(splined) .........................
3689081:
;NOTE: Consists of: 1 Spacer, 1 Cap, 1 Gasket, 1 Seal, 5 Bolts, and 5 Washers.
5.809 DRUM ASSY.—DISC, Front and Rear Wheel Brake
........................
38-39 HA, JA
38-39 PASS. , '-, TON,
38-42 HD, JD, KD, AL, BL,
40-50 '2 TON
40-48 PASS . .........................
38-40 HB, JB, KB,
38-42 COMM.,
46-50 ' 2 TON ........................
39-40 COE ..........................
41-50 UTILITY,,,,,,,,,,,,,,
40-52 UTIL.wiH.D. on WB, WC (exc. WA)
46-52 ', TON ........................
46-52 1 TON,,,,,,,,,,
47-52 3.4 TON (exc. D-D) ... •... ... ... .
47-52 D-D, 1 TON w/sgl. rear wheels
47-52 1 TON w/dual rear wheels ........
49-50 PASS . .........................
51-58 PASS.,CORVETTE(exc, H.D. BRK./
Susp., metallic linings, TAXI),
Brake/Susp., metallic linings)
58
TAXI,
59-62 PASS. (exc. metallic linings),
63-64 PASS., CORVETTE (exc,
metallic linings, Sp./Per.),
65-68 PASS. (exc. metallic brakes),
65
CORVETTE ,,,,,,,,
51-59 'z TON (exc. P/Trac.),
60-63 52 TON .........................
64-67 Ser. 10 (exc. 4/WD) ..............
64-68 Ser. 10 ........................
51-53 UTILITY,
54-55 1'z TON (1st Ser.) (exc. 2-SPD.)
51-55 ALL w/Prop. Brake (1st Ser.).... .
53-59
TON (exc. 14" brake),
60-67 Ser. 20 (4,'WD, D-D),
68
Ser. 20 (4/ WD) ..................
.........................
front,
rear,
frontand rear ......................
601985
front ..............................
602432
rear (also used on V, W, with cast iron
drums) ..........................
603688
front ..............................
604718
rear ..............................
609807
rear ..............................
609808
front.............................. 3847128
front ............................. 3847129
front (daub of white paint on web) .... 3847698
front and rear ...................... 3690338
front and rear,
rear ..............................
3868801
front and rear,
front and rear,
rear.............................
3846271 A.R.
rear ........................ .....
parking...........................
3696522
591614
2
1
31.65
(5.610)
rear...............................3754300
2
20.95
5.806-5.809
13.50
c-1967
912
53-59
, 1 TON,
60-67 Ser. 20 (D-D),
60-66 Ser. 30 (D-D) w/7.50 x 17, 8.19 x
5 tires,
67
Ser. 30 (D-D) (exc. 11000 lb.
axle SGL. SPD.)
53-55 ' TON (exc. D-D)
53-59 1 TON,
55-62 D-D (2 nd Ser. ),
63-67 Ser. 30 (D-D)
..............
...............
..............................
front
front w/6.50 x 16-6 ply tires,
3754332
2
18.75
...................
front, w/7.00 x 18; 8 x 14.5-6-8 ply;
6.50 x 16-6 ply, 7.00 x 16-6 ply;
7.50 x 16-8 ply tires,
58-59 Ser. 3E w/duals
7.00 x 17.5 tires
3754314* 2
*NOTE: Pilots on knurler shoulder of bolt cannot be interchanged with 3754332 which pilots on
threaded shank section.
53-59 1 TON,
D-D (2nd Ser.)
55
rear, w/7.00 x 18; 7.50 x 17,
8 x 19.5 tires
3754313
2
67
Ser. 30 (D-D) w/ 11000 lb. rr. axle
front
3754299
2
54-55 1'2 TON w/2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.),
67
Ser. 30 w/11000 lb. axle .........
rear
3754317
2
(exc. H.D. Brake/Susp., P.G.),
67
PASS. w/metallic linings.........
front and rear,
linings (exc. Sp./H/Per.),
67-68 PASS. w/metallic linings.........
rear
3869537 A.R.
57-62 CORVETTE w/H. D. Brake/Susp. .
front
3784117® 2
®NOTE: 3776926 Brake Drum Fan must be used.
57-62 CORVETTE w/H.D. Brake/Susp. .
rear
3776932t 2
1 NOTE: 3776935 Brake Drum Fan must be used.
58-59 '2 TON w/P/Trac
rear
2346809
2
59-62 PASS. w/metallic linings ........
front
3782993
2
59-62 PASS. (exc. metallic linings),
63-64 PASS., CORVETTE (exc. metallic
linings)
front
3830166
2
60-67 Ser. 20 (exc. 4/ WD, D-D,
6.50 x 16-6 ply tire)...........
rear
3857752# 2
#NOTE: Use as single rear wheel drum assy.
60-63 Ser. 20 (4/WD)
front (Budd 82517)
2408346
2
60-68 Ser. 20-30 (exc. 4/WD, D-D) ......
front,
63-67 Ser. 20 w/6.50 x 16-6 ply (exc.
D-D, 4/WD),
68
Ser. 20-30 (D-D),
64-66 Ser. 20 w/dual wheels (exc. D-D,
4/WD) ..... ..................
rear .............................. 3846354
2
60-62 Ser. 30,
63-68 Ser. 30 wdual wheels
rear
3814943
2
63-68 Ser. 30 (exc. duals)
rear
3831784
2
linings (exc. Sp./Per.).........
front
3830167
2
63-64 CORVETTE w/Sp./Per., Metallic
Brakes, Fan Cooled
front
3843900
2
63-64 CORVETTE w/Sp./Per., Metallic
Brakes, Fan Cooled
rear
3841831
2
64-68 Ser. 10 (4/WD)
front (Budd 89388)
2459604
2
64-68 Ser. 20 (4/WD)
front (Budd 89401)
2459622
2
64-67 G-10 w3,36 ratio
rear
3853712
2
64-66 G-10 w/4.11 ratio,
64-66 G-10 w/P/Trac., 3.73 ratio .......
rear,
64-68 G-10 ...........................
front .............................
3853799
2
rear
2457051• 2
65-66 Ser. 20 w/leaf type spring........
rear
2458493• 1
65
CORVETTE (exc. metallic brakes),
65-68 PASS. (exc. metallic brakes) .....
front .............................. 3872326
2
65-68 PASS. w/metallic brakes.........
front .............................. 3872384
2
67-68 G-20 ...........................
rear .............................. 3894453
2
67-68 G-20 ...........................
front .............................. 3905830
2
.................
..................
...................
....................
..............................
..............................
................
......................
..................
...........
..............
...........
...........
..................
..................
...............
.............................
..............................
..............................
..............................
..............................
..............................
..............................
.................
..............................
..............................
..............................
...................... ........
..............................
..................
..................
..............................
..............................
..............................
3-1967
18.75
24.75
22.75
31.75
14.85
20.75
20.80
13.25
16.00
16.25
20.50
18.50
20.75
25.25
24.25
16.75
21.50
22.30
16.50
19.75
12.20
13.25
14.15
22.15
14.75
12.05
15.50
17.50
5.809
913
65-68
65-68
67
67
...................
....................
.............
..............
CORVETTE
CORVETTE
PASS. w/disc. brake
PASS wi disc brake
DISC,
DISC,
DISC,
DISC,
front w/hub....................
rear...........................
front w/hub
front w/hub
....................
....................
3867311
3865905
3901099
3933936
2
29.75
2
28.10
2 (6.307)
2
front, cooling
......................
3776926
2
3.54
front, cooling
rear, cooling
......................
......................
3821105
3776935
2
2
3.39
3.54
.............
3694290
A.R.
.95
2332713
2332714
2
A.R.
1.75
1.60
3697154
2
.75
476518
604360
3653928*
2
2
2
.12
.15
.50
3680995
23588690
2
2
.20
.05
....................................
.............. ....................................
370465t 12
3683850 10
.40
.40
('/6_20 x 1'/e) ......................
3829376t 12
.40
drum to hub .......................
3650739
12
.40
(w/duals).........................
3680865
16
.40
(w/sgl. rear wheels) ................
3849110t 16
.40
drum to hub (w/duals)...............
....................................
3681333
3682387
16
10
.40
.45
(s/e x 18, 4 6 lgth.) ..................
3705783
10
.45
5.810 FAN—SPRING, Brake Drum
60-62
60-62
62
63-64
63-64
38-62
63-67
67
68
53-57
55-57
53-57
CORVETTE w/H.D. Brake/Susp.
CORVETTE w/H.D. Brake/Susp.,
CORVETTE w/H.D.,
CORVETTE w/Sp./Per. .........
CORVETTE w/Sp./Per. .........
PASS., CORVETTE (exc. H.D.
Brake /Susp.),
PASS., CORVETTE (exc. Sp./Per),
Ser. 10
1 TON w/dual wheels,
D-D (2nd Ser.) w/dual wheels.....
3
/4 , 1 TON w/single wheels .......
.........................
SPRING (32'/4 free length)
SPRING, rear brake (45 O.L.)..........
SPRING, front and rear brake (38/2 O.L.)
5.811 SP ACER—GASKET, Front and Rear Wheel Hub or Drum
51-53 2 TON
38-48
51-59
60-68
65
38-40
40-47
.........................
front wheel (4 15/, 6 I.D. x 8% O.D. x /
thk.-5 holes) ....................
PASS. (exc. HB, JB),
!2 TON,
Ser. 10 (exc. 4/WD)
GASKET, front brake drum,
Ser. 10
rear brake drum (41,
x 6 °4, O.D.) .
T, V, W (w/2 speed axle only on W) GASKET, rear hub with '4 axle bolts
UTILITY ..... .......
...... GASKET, rear hub with Y axle bolts. ..
*NOTE: Not used w/splined type shaft and hub.
46-66 ?;, 1 TON,
67-68 Ser. 20
GASKET, rear hub / axle bolts (2% I,D.
67-68 Ser. 30 (exc. 11,000 lb. axle).....
x 4''l 6O.D.)
GASKET, rear axle shaft
.............
........................
.........................
.......................
..............
5.812 BOLT—STUD, Hub or Drum (Front and Rear Wheel)
BOLT, Front Hub
38-40 H, J, K (exc. FA, GA, HA, JA, KA,
KH),
41-42 COMM.,
46-50 'z TON .........................
38-42 UTILITY (exc. LR)
38-60 PASS. (1st design) (exc. HB, JB),
51-61 ' 2 TON (exc. P/Trac.),
53-60 CORVETTE (1st design),
Ser. 10,
62
63-65 Ser. 10 (4/WD) ..................
39
COE,
40-55 UTILITY w/H.D. WB, WC (1st Ser.)
(exc. WA),
67
Ser. 30 (D-D) w/11000 lb. rr. axle
46-55 1 TON,
53-55 3 TON (exc, D-D),
55
D-D (2nd Ser.) ..................
46-59 3;, 1 TON,
60-66 Ser. 20-30 (exc. 4/WD) ...........
46-55 1 TON,
53-55 '; TON (exc. D-D),
D-D (2nd Ser.) ..................
55
46-53 UTILITY (exc. 0) ...............
67
Ser. 30 w/11000 lb. rr. axle.......
5.809-5.812
&_1967
914
56-59
60-62
63-66
67
68
68
60
61
60-65
62-67
63-67
60
61-68
63-68
63-67
63.67
65-66
66-67
68
67
67
57-59
57-59
66-68
60-68
65-66
'4, 1 TON,
Ser. 30 w /dual wheels,
Ser. 20-30 w/dual wheels,
Ser. 20-30 (exc. D-D, 4/WD),
Ser. 20 (D-D),
Ser. 30 (exc. 4/WD) ..............
drum to hub ........................
PASS. (2nd design),
PASS., '2 TON,
CORVETTE (2nd design),
PASS.,
Ser. 10, G-10-20 (exc. 4/WD)......
('/6-20 x 1 3/8 ) ......................
Ser. 30 (D-D) w/H.D. frt. spring,
Ser. 30 (exc. STEPSIDE),
Ser. 20 w/127 W.B. (exc. Pickup,
Panel 4/WD),
Ser. 30 w/133 W.B. (exc. Pickup,
Panel),
3
Ser. 30 (D-D) ..................
( /64 dia. serrated shldr.- 4 head dia.).
CORVETTE w/disc. brakes ......
('/6_20 x 1 3/4 ) ......................
Ser. 20-30 (exc. D-D, 4/WD),
Ser. 20-30 (exc. 4/W.D.) ..........
....................................
CORVETTE ...................
(/-2O x 1 '/4) ......................
PASS. w/disc brakes ............
front ..............................
Ser. 3A w/4/WD ................. STUD, front ( 5/ 6 -24 x S/ 6 -18 x 1'/) .....
Ser. 3E-3G w/4/WD (exc.
locking hub) .................. STUD, front .........................
Ser. 20 (4/WD) .................. STUD, front ( 3/8 -16 x 1"/ 6 ) ............
Ser. 20 (4/WD) .................. STUD, front ( 1 2-20 x 1'.;)..............
Ser. 20 w/leaf type springs ....... STUD, rear ..........................
NOTE: Also listed in rear hub section of this group.
3757999
16
.20
38516771 A.R.
.40
3778368 A.R.
3864028 A.R.
.25
.10
3883323
16
.35
3910340 A.R.
3898007 A.R.
.15
.15
3747236
.65
28
3749873 A.R
.60
2403692 12
2401959 16
2361098 • 8
.30
.25
.35
BOLT, Rear Hub
NOTE: (front) shown in column at right indicates part is also used as Front Hub Bolt.
UTILITY (exc. COE) ............
....................................
367017 20
CA, CB, DA, DB, EA, EB, ED ....
....................................
370465 12
PASS., COMM. (exc. FB),
PASS.,
', Z TON (exc. P/Trac.),
Ser. 10,
CORVETTE,
Ser. 10 (4/WD) (1st Ser.) ........
(7^6-2o x 1'/) ...................... 3829376 A.R.
UTILITY ......................
(use w/hubs having f1g. thickness of
29/3, on reg. prod. axles and fig.
thickness of 2 /
2-SPD. and
hvy, duty axles) .................
5238559 20
39-42 VF, Vi4, VN, WD, WE, WF, Y, M...
(use w/hubs having fig. thickness of
2B
/ 2 on 2-SPD. and hvy. duty axles) . 3668105 20
38-40
33-35
38-42
46-59
46-59
60-62
53-59
63-64
38-46
©-1967
40
40
40
40
35
5.812
915
HUB BOLT CHART
3
PartNo.
A
B
367017
370465
2351583
3650739
3668105
3680865
3680991
3681333
3682153
3682387
3682389
3683850
3694508
3697043
3705783
3705784
3705785
3726228
3757999
3778368
3819780
3829376
3849110
3849118
3851677
3864028
3883323
3898007
3910340
221/32
117/2
1°/16
13'/64
9/q
6a
,
s64
3 1 I,,
9/3,
1564
15164
237/4
j31/
4
321/64
279/64
3332
2'/32
3'32
315/2
131/32
2e
3Y8
2°i6
1 9/32
14/64
2'R
158
16364
215;,
1664
15/64
32
932
932
°/2
°/2
X32
9/2
9/12
32
a
/4
5/64
5
Y,
5/6,
75/61
15
5238559
C
31/32
37/ 4
's/2
1'/a
7/6
43/64
1532
916
2932
'/6
3,4
1
°/16
916
E
F
23 32
91 _18
"6-20
23 8
179 a
32
'16-20
1516
. -20
9, —18
I
—20
2
12 —20
/2 —20
s/8 —18
SIB —18
—
18
8
9
p
^1, -10
—
18
SIB
sB —18
s/a —18
5 —18
8 —18
2 —20
2 —20
1!.
225„
19i,
214
11/
33Rd
13
3)
1 2* ,,
1',B
1 64
4
1 57/64
1 2 964
129
32
5
1 X '16
23/
'16
u
18
2
4
1
516
11
T'2
15,
21 64
41
/6,
29/32
1 '3
1 314
1
'8
1
15 64
21",
73z
1/4
1932
273 2
V,
2136.
9,,
2,
1 2'1/32
64
2,
213,
11 3q
215'1,
11116
219 1 ,
227/,,
2 46
ls;6
—
^ê
1 27
1 33/6
i
1 ;6
1164
1 5/6d
1 79 ;.
163/6,
115/16
2
2
29
1
2
20
—20
113/,,,
2'-,
?16-20
138
';-20
2 —20
6 -20
'12-20
1
2 —20
îlfi -20
13/
2
136
1' 4
123
„ ,
13”
—20
p
46-59 ,, 1 TON w'sgl. wheels
60-67 Ser. 20-30 (D-D),
60-62 Ser. 20 (4 /WD) (1st design) .......
(use w/forged hub having 5 5 flange)
46-59 3. 4, 1 TON w; sgl. wheels,
60-67 Ser. 20 (D-D),
60-62 Ser. 20 (4/WD) (1st design) .......
(use w/cast hub having '/e flange)....
*NOTE: Not used on 1955 1 TON models w/18 x 5.0 wheel equipment.
46-55 1 TON,
53-55 '.; TON (exc. D-D),
55
D-D (2nd Ser.) w; dual wheels .....
(use w,'forged hub having 5/ flange)...
46-50 UTILITY (exc. 0) ...............
(use w/cast hub) .......... .
46-50 UTILITY (exc. 0) ............. . .
(use w/forged hub) .................
46-55 1 TON,
3
53-55 , TON (exc. D-D),
55
D-D w dual wheels (2nd Ser.),
56-59 ' 4 , 1 TON w/dual wheels,
60-62 Ser. 20 (exc. D-D, 4/WD),
60-62 Ser. 30 (exc. 4;1WD),
62
Ser. 20 (4 /WD) (2nd design),
63-67 Ser. 20 (exc. D-D, dual wheels),
63-67 Ser. 30 (exc. dual wheels) (exc.
5
11000 lb. axle) ...............
( 2 -20 x 2 / 6 ) . . . . . . . ...............
51-53 UTILITY ................
.....
(use w/forged hub having 11, flange).
51-53 UTILITY ................ . ......
(use w/cast hub having 15 1 6 flange)
67
Ser. 30 (w 11000 lb. axle) ........
(use w/forged hub having "/,, flange)..
5
67
Ser. 30 (w/11000 lb. axle) ........
(use \v
hub having ' / 6 flange) .. .
58-59 2 TON wiP/Trac ................
rear ('/ 6 -20 X 25/ 2 thd. lgth.) .........
60-65 CORVETTE,
60-68 PASS.,
63-67 Ser. 10 (exc. 4!WD),
63-64 Ser. 10 (4, WD) (2nd Ser.),
64-68 G-10-20,
65 -67 Ser. 10 (4 WD) .................
(' -20 x 1 '6) ............
63-66 Ser. 30 w /dual wheels,
65-67 Ser. 20-30 w / P/Trac ............ .
65-66 CORVETTE w 'disc. brakes ......
(?16-20 x 1 314 ) ,,,,,,, , , , , , , , , , , , ,
67
CORVETTE ...................
(' -20 x 1 4) ..................
5.812
D
9/6-18
13
2"72
3849110* 16
.40
3849118* 16
.40
3680991 16
3682153 20
3682389 20
.40
.50
.50
3726228 16
3694508 20
3697043 20
.35
.50
.50
3705784 20
.45
3705785 20
2351583 12
.50
.35
3851677 A.R.
(front)
3819780 16
.30
3864028 A.R.
3910340 A.R.
(front)
(front)
0-1967
5.813 NUT—NUT ASSY., Hub—Front and Rear
38-42 PASS., COMM.,
14
46-66 PASS., CORVETTE, TON (exc
' 2 TON w/P/Trac.),
67-68 ALL ...........................
38-46 UTILITY (exc. LR) .............
46-55 ' „ 1 TON w/sgl. wheels (1st Ser.)
46-49 COMM. w,'dual wheels ..........
46-53 UTILITY .......................
67-68 Ser. 30 w '11000 SGL. SPD. axle ..
55-68 ',, 1 TON w 'sgl. wheels (2nd Ser.)
56-62 'a, 1 TON w'dual wheels,
63-68 Ser. 10 thru 30 w/dual wheels .....
63-66 CORVETTE w/knock off wheels ..
CORVETTE ....................
63
CORVETTE ....................
63
64-66 CORVETTE ....................
64-66 CORVETTE ....................
65-66 (D-D) ..........................
wheel hub bolt (" —20) .............
hub, front (°,1 6 -18 thick) ............
('4-20 wrench size 3/,) ..............
(' -20) ...........................
wheel hub bolt ( s 4-18—'( thk.) .......
.15
358501 A.R.
3742251 A.R.(6.172)
.20
3680920 32
9417614 32 (8.915)
.20
373912 A.R.
lock (' —l8) .......................
(' 2 -20 wrench size "ib) .............
3724246
3719845
30
32
('2-20) ....... ....................
( -20) ...........................
NUT ASSY., left (w/knock-off wheels) ..
NUT ASSY., right (w;'knock-off wheels)
NUT ASSY., right (w/knock-off wheels)
NUT ASSY.. wheel hub bolt (,-20) ....
3726212
3852554
3819543
3819544
3853795
3853796
2346840
32
A.R.
2
2
2
2
4
.45
.25
.25
.4C
14.5.5
14.55
15.25
15.25
.04
5.815 DEFLECTOR, Rear Wheel Hub and Drum
38-42
46-59
60-62
63
38-50
38-48
COMM.,
'2 TON (exc. P;'Trac.),
Ser. 10,
Ser. 10 (4/WD) (1st Ser.) .........
UTILITY ......................
PASS. .........................
46-59 ';, 1 TON,
60-67 Ser. 20 (D-D),
60-62 Ser. 20 (4/WD) (1st design) .......
49-54 PASS.,
53-55 CORVETTE ....................
51-53 UTILITY,
54-55 1, TON (1st Ser.) (exc. 2-SPD.),
67
Ser. 30 (w/ 11000 lb. axle) ........
54-55 1', TON w/2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.) ................
60-67 Ser. 20 (exc. D-D, dual wheels),
60-61 Ser. 30 w single wheels,
61
Ser. 30 w dual wheels (2nd design),
62-67 Ser. 20 (4 'WD) (2nd design),
Ser. 30 (exc. P,Trac.),
62
63-67 Ser. 30 (exc. 11000 lb. axle) ......
60-61 Ser. 30 w 'dual wheels (1st design),
62 Ser. 30 w'P/Trac . ..............
63-65 Ser. 10 (exc. 4 /WD),
63-65 Ser. 10 (4/WD) (2nd Ser.) .........
63-67 Ser. 20-30 w /dual wheels........ .
rear brake drum oil .................
rear wheel ........................
rear brake drum oil (3 l / 6 I.D. x
6 58O.D.) ........................
378548
473632
2
2
.70
1.45
593253
2
.66
rearhub ..........................
3680992
2
1.35
rear brake drum oil (4'/, I.D. x 5'-x O.D.)
3687775
2
.56
rear hub oil (5',4 I.D. x 8 2 94, O.D.) ....
3697705
2
1.45
rear hub oil (5"/,, I.D. x 8 294, O.D.) ...
3702291
2
1.45
rearhub oil ........................
3760191
2
1.40
rearhub oil .......................
3759855
2
1.40
rear brake drum oil .................
rear hub oil ........................
3814218
3819781
2
2
.70
1.40
inner, axle shaft bearing ............
370251
2
.15
inner, axle shaft bearing ............
472521
2
.14
wheel bearing (hub dia. 2%) .........
3708829
2
.56
axle shaft and bearing ..............
wheel bearing .....................
3739104
2346837
2
2
.56
.95
5.816 RETAINER — RING—BOLT—SPACER, Rear Axle Shaft Bearing
38-42 COMM.,
46-59 '2 TON (exc. P'Trac.),
60-62 Ser. 10,
Ser. 10 (4/WD) (1st Ser.) .........
63
38-54 PASS.,
53-55 CORVETTE ....................
55-56 PASS.,
56
CORVETTE ................... .
57-58 PASS..
59-60 TAXI,
57-61 CORVETTE,
62-63 PASS. w/4.11, 4.56 axle,
62
CORVETTE (exc. metallic linings,
3.55 axle) ....................
58-59 '; TON w / P/Trac . ..............
?-1967
5.813-5.816
917
59-61 PASS. (exc. TAXI),
62-63 PASS. (exc. 4.11, 4.56 axle),
62
CORVETTE w/metallic linings,
3.55 axle,
64
PASS .
axle shaft and bearing
`NOTE: Held in place by rear flange plate and brake assy. attaching parts.
63-65 Ser. 10 (exc. 4/WD),
63-65 Ser. 10 (4WD) (2nd Ser.) .........
inner axle shaft and bearing .........
38-53 UTILITY,
54-55 1'z TON (1st Ser.) (exc. 2-SPD.),
67-68 Ser. 30w '11000 lb. axle ......... RING, rear hub bearing retaining .......
46-6 ' , 1 TON (exc. 11000 lb. axle).... RING, rear hub bearing retaining .......
54-55 1' 2 TON w'2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.)
RING, rear hub bearing retaining .......
55-57 PASS..
57
CORVETTE,
58-63 TAXI (1st design),
58-62 CORVETTE w P'Trac.,
63
POLICE (1st design)
RING, retainer (Hy .11542-22)
55-62 PASS. (exc. 1958 TAXI),
63-64 PASS. (exc. 1st design TAXI,
POLICE),
63
TAXI, POLICE (2nd design) ...... RING, retainer (1'/ I.D. x 1"), O.D.) ...
58-59 'z TON w P Trac . .............. RING, retainer.......................
55-59 PASS .
BOLT, shaft and wheel brg. retainer
56-59 CORVETTE
( / 24 x 1 3 'i b ).....................
57
PASS.. CORVETTE,
58-64 TAXI,
58-61 CORVETTE (exc. P.O.),
62-64 POLICE
SPACER, bearing
63-68 CORVETTE
SPACER, rear wheel bearing...........
.........................
..............
................
............
..........
.........................
...................
.......................
....................
....................
3755959t
2
.56
3819585
2
.1.5
594324
3663672
2
2
.40
.40
3703709
2
.50
7451110
2
2.60
3851557
2409730
2
2
.55
.45
3788231
8
3750617
3820224
2
1
(5.002)
.29
1.00
5.819 GASKET, Whe el Hub and Drum Oil Deflector, Front and Rear
............
38-40 UTILITY (exc. COE)
38-42 COMM.,
38-48 PASS.,
46-59 1 2 TON (exc. P/Trac.),
60-62 Ser. 10,
63
Ser. 10 (4 WD) (1st Ser.) .........
38-50 UTILITY (exc. LR)
..............
38-40 HB, JB, KB
38-42 COMM.,
46-50 ' 2 TON.....
38-39 HA, J A
40-48 PASS
51-61 ' 2 TON (exc. 4 'WD)
39-40 WB, WC, COE w/H.D. on WB, WC,
67
Ser. 30 (D-D) w 1100 lb. rear axle
46-59 3 a , 1 TON (exc. DR),
60-64 Ser. 20-30 (exc. 4'WD) ...........
65
Ser. 20-30 (exc. 4/WD),
67
Ser. 20-30 (D-D) (exc. 11000 lb.
axle)
66-67 Ser. 20 (exc. D-D),
66-67 Ser. 30 ........................
49-54 PASS ..........................
53-62 CORVETTE,,,,,,,,,,,,,,,
58-59 ', TON w P'Trac ................
55-64 PASS..........................
56-62 CORVETTE,,,,,,,,,,,,,,,,,
60-64 PASS..........................
63-64 Ser. 10 (exc. P Trac. 4 /WD),
63-64 Ser. 10 (4 WD) (2nd Ser.)........ .
........................
..........................
............. .
........................
front,
rear brake drum (412 I.D. x 6'91 6 O.D.).,
rear, disc and dual wheel hub oil outer
deflector (6'.e I.D. x 8 1, O.D.) .. , ...
365673 A.R.
.15
359428
2
15
front, oil deflector (4 / I.D. x 4 1=;,1 6 O.D.) 370959
front brake drum oil deflector
(4',z I.D. x 6°/ 6 O.D.)(has 3 holes 3/A
diameter and 7 holes) (15/e diameter) .
476124
2
06
2
15
front brake drum ....................
3650740
2
20
3681204
2
15
3779684
2346839
2
4
15
05
3772374
3775360
2
2
19
15
3819586
2
15
1
front and rear, brk. drum oil deflector
front,
rear (5 1,/ I.D.-8 holes) ..............
frt. and rear, brake drum oil deflector
front (33 ID. x5"/aO.D.)(five 6 holes)
axle shaft and wheel brg. retainer ....
wheel bearing retainer, rear (4 holes
'a I.D.) ( 4 's x 4 ' 1/32 ) ...............
rear axle housing flange inner........
rear brake drum (43B I.D. x 6'/ 6 O.D.)
(6 holes— 15 3 dia. ) ................
5.816-5.819
x_1967
918
5.820 RING, Rear Wheel Hub Clamp
38 -46 UTILITY.......................
(8'/e O.D. x 19/ 2 dia, bolt holes; use
dia. hub bolts) ..............
475068 A.R.
2.00
(29/
D. x 8/8 O.D.) ................
21
( /3 2 dia. holes, use w/ 5 /e dia.
3680931 A.R.
2.25
3682391
A.R.
2.1C
3814280
3681195*
2
2
2.35
2.90
3705796
2
1.85
3883386
2
2.45
2360331
2
1.55
3708819
2
1.05
3750294
3794006
3794002
2
2
2
1.05
.75
.75
3819584
2
1.45
.80
w/
46-55 1 TON,
53-55 '/4 TON,
55
D-D (2nd Ser.) w/dual wheels ....
46-53 UTILITY.......................
h ub
6
bolts) .......................
5.822 SEAL—SEAL UNIT—"O" RING—SHIELD, Rear Axle Shaft Bearing or Hub
38-42 COMM.,
46-59 ' 2 TON (exc. P/Trac.),
60-62 Ser. 10,
axle shaft oil—two leathers..........
63
Ser. 10 (4/WD) (1st Ser.) .........
38-47 UTILITY .......................
rear wheel hub oil ..................
*NOTE: 3681195 not used w/splined type shaft and hub.
38-54 PASS.,
axle shaft oil ......................
53-55 CORVETTE ....................
46-65 3/„ 1 TON,
rear wheel inner bearing oil ..........
66-68 Ser. 20-30 (exc. 11000 lb. sgl. spd.)
58-59 12 TON w/P/Trac.,
axle shaft oil (Dana 18516-6J ........
rear hsg. inner brg. race (rubber 2/B
54-55 1';2' TON (1st Ser.) w/2-SPD.......
54-55 2 TON (1st Ser.) ................
I.D. x 3'/, 6O. D.)..................
56-57 CORVETTE w/H.D.,
58-62 TAXI,
63-64 TAXI, POLICE .................
(stamped 3750294) (roller bearing) ....
63-68 CORVETTE ....................
rear wheel outer bearing.............
63-68 CORVETTE ...................
rear wheel inner bearing .............
63-64 Ser. 10 (exc. 4/WD),
63-64 Ser. 10 (4/WD) (2nd Ser.).........
axle shaft oil ......................
64-68
G-10,
65
PASS. w /10 bolt ................
PASS., w/12 bolt,
65
65-68 Ser. 10, G-20,
rear wheel.........................
3832418
2
66 -68
rear wheel (8% ring gear)............
3843648
2
.95
2366119•
2
1.75
3880674
2
3.15
3717672
3717671
3730317
3739435§
2
2
2
2
1.65
1.65
1.70
3749981§
2
1.70
3772999§
2
1.70
3707389
2
.35
3739112
2
.35
3772034
3820238
2
2
.35
.33
PASS . .........................
65-66
47-53
52-55
67-68
54-55
54-55
55
56
57
58-59
58-59
60-62
60-62
63-64
oil (Dana 30662-2) ..................
UTILITY,
1 2 TON (exc. 2-speed),
rear wheel bearing oil ...............
Ser. 30w/11000 lb. sgl. spd. axle ..
1', TON w/2-SPD. (1st Ser.),
2 TON (1st Ser.) ................ SEAL UNIT, rear wheel ball bearing ....
SEAL UNIT, rear wheel ball bearing....
PASS ..........................
SEAL UNIT, rear wheel ball bearing....
PASS ..........................
SEAL UNIT, rear wheel ball bearing, , , ,
PASS. (exc. TAXI),
CORVETTE (exc. P/Trac.).......
SEAL UNIT, rear wheel ball bearing.. , ,
PASS.,
CORVETTE (exc. P/Trac.),
PASS. (exc. TAXI, POLICE)...... SEAL UNIT, rear wheel ball bearing....
§NOTE: Consists of: "0" ring and seal assy., w/retainer.
55-56 PASS ..........................
"O" RING, rear wheel brg.
56
(2% I.D. x .103) ....................
CORVETTE ....................
61-62 CORVETTE w/metallic linings,
61-64 TAXI .........................
"0" RING, rear wheel brg.
63-64 POLICE ......................
(2% I.D. x .103) ....................
60-64 PASS. (exc. TAXI),
60-62 CORVETTE (exc. P/Trac.).......
"O" RING, (2^/9 I.D. x .070) ............
63-68 CORVETTE .................... SHIELD, rear wheel inner bearing dust ..
-1967
5.820-5.822
919
5.829 NUT, Rear Axle
38-53 UTILITY,
54-55 1';z TON (exc. 2-SPD.) (1st Ser.)
67-68 Ser. 30 w/11000 lb. axle .........
46-66 %, 1 TON,
67-68 Ser. 20-30 (exc. 11000 lb. axle) ...
54-55 1'2 TON w,/ 2-SPD. (1st Ser.) .....
54-55 2 TON (1st Ser.) ................
63-67 CORVETTE ....................
63-64 CORVETTE,
64
PASS., G10 .....................
65-66 Ser. 20 w'leaf type spring ........
hub adjusting, inner and outer ........
473636
4
1.20
hub adjusting, inner and outer........
hub adjusting, (2/, I.D. x 3% O.D.)...
w/6 slots).........................
rear wheel spindle flange (%-20), , . , ,
3663657
4
1.20
3703711
378137
4
2
1.50
(6.022)
rr. wheel spindle supt. strut adj. cam
('/-20) ................:........
rear wheel hub adjuster .............
3691530
2
23588660
4
1.10
hub adjusting ......................
473629
2
.30
hub adjusting, (2/33 I.D. w/11 lugs) ...
3663659
2
.30
hub adjusting (2'/33 I.D. w/11 lugs). . .
hub adjuster (Dana 30637) ...........
3703703
2358867•
2
2
.30
.12
WASHER, hub adjusting ...............
473628
2
.30
WASHER, hub adjusting ...............
3663658
2
.30
WASHER, hub adjusting, (2"/ 2 I.D. x
3"/ 6 O.D.-steel) ...................
WASHER, rear wheel spindle flange
3703704
2
.30
3830252
2
.15
3839832
2
.30
(7.395)
5.830 LOCK-WASHER, Rear Axle
38-53 UTILITY,
54-55 1':2 TON (exc. 2-SPD.) (1st Ser.),
67-68 Ser. 30 w /l1000lb. axle .........
46-66 ';, 1 TON,
67-68 Ser. 20-30 (exc. 11000 lb. axle) ...
54-55 112 TON w/2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.) , , , , , , , , , , , , , , , ,
65-66 Ser. 20w/leaf type spring , , , , , , , ,
38-53 UTILITY,
54-55 1'iz TON (exc. 2-SPD.) (1st Ser.),
67-68 Ser, 30 w/11000 lb. axle .........
46-66 34, 1 TON,
67
Ser. 20-30 (exc. 11000 lb. axle) ...
54-55 1'; 2 TON w/2-SPD. (1st Ser.),
54-55 2 TON (1st Ser.) , , , , , , , , , , , , , , , ,
63
CORVETTE (1st design) .........
(9
63-68 CORVETTE (2nd design) .........
thk.) ..........................
WASHER, rear wheel spindle flange
7/
( 33thk.) ..........................
5.839 RIN G, Tire Rim Locking
39-46
46-52
46-55
46-66
67-68
46-63
65-66
67
67
46-55
55
60-67
68
46-55
55
60-67
68
46-55
UTILITY (exc. P) ....... . .... . . .
1'2 TON (exc. SBC) ..............
TON ............. . . . ......
3„ 1 TON ......................
Ser. 20-30 (exc. D-D) ............
%, 1 TON (1st design),
Ser. 20-30,
Ser. 20 .........................
Ser. 30 (exc. D-D) ...............
1 TON,
D-D (2nd Ser.),
Ser. 30 .........................
Ser. 30 (CONY.) (exc. STEPSIDE) .
1 TON,
D-D (2nd Ser.),
Ser. 30 .........................
Ser. 30 (exc. D-D) ...............
UTILITY (1st Ser.) (exc. 0) ......
rim clamp (20 x 5.00S) (use w/wheel
asst'. 3651623, 3652176) • .........
rim clamp (15 x 5.50F) ..............
rim clamp (17 x 5.0, 6.0) (use w/wheel
assy. 3681786, 3684454) ............
2039648 A.R.
3680918 A.R.
8.50
4.95
3681788
A.R.
4.20
rim side (17 x 5.0) (use w/wheel assy.
3681786, 3684454) ................
23068460 A.R.
7.30
rim clamp (18 x 5.0) (use w/wheel assy.
3682064) ........................
3682062
A.R.
4.35
2306847• A.R.
7.30
3696716
A.R.
4.20
3707075
A.R.
8.85
2279741
A.R.
8.95
3695975
A.R.
6.60
3695974
A.R.
6.60
rim side (18x 5.0)(use w/wheel assy.
3682064) ........................
rim clamp (use w/wheel assy. 3682076,
3682082, 3696712, 3715496)•••••..
46-55 1^/2 TON (1st Ser.) ...............
46-55 2 TON (1st Ser.) ................
53-55 1';z TON w,/H.D. (1st Ser.) ........
48-51 2 TON (exc. SBC) ...............
rim side (20 x 5.0)(use w/wheel assy.
..............
3682076, 3715496
.
3682082, 3696012, 3703878 . , ......
rim clamp (20 x 6.5) (use w/wheel
48-51 2 TON (exc. SBC) ...............
assy. 3695970)••• ................
1
3695970) ......•.•.• .............
49-55 1 ,2, 2 TON (1st Ser.) .............
rim side (20 x 6.0)(use w/wheel assy.
53
'Z TON w/H.D ...................
3693380,3696012, 3703874, 3726167) 2274258* A.R.
"NOTE: Also used on 1956-1958 models equipped with tube tires.
5.829-5.839
920
9.50
C-1967
................
TON .........................
TON .........................
51-55 2 TON (1st Ser.)
53-68
61-68
60-68
60-66
63-66
60-66
60-66
63-66
60-62
63-67
65
3
,q
1
Ser. 10,
Ser. 20 (exc. D-D, 4/WD) .........
Ser. 20 (4/WD) ..................
Ser. 10,
Ser. 20 (exc. D-D, 4/WD) .........
Ser. 20 (4/WD)
Ser. 30 (D-D)
Ser. 20-30 (2nd design)
Ser. 20 (exc. D-D)
65-67 Ser. 20 (exc.
67-68 Ser. 20 (exc.
5.855
38-53
54-55
67-68
38-53
54-55
67-68
46-67
46-68
54-55
54-55
54-55
54-55
38-39
40-59
60-62
63
38-54
53-55
58-59
63-67
63-68
63-68
63-68
65
66-68
67-68
64-67
65-67
65
64-68
64-68
65-68
55-56
56
55-56
56
57
57-58
58-62
59
60-62
63-64
58-62
58-62
63-64
63-64
63
63-64
63
63-67
63-67
63-67
..................
...................
...........
...............
D-D) ...............
D-D) ...............
3696712, 3705226) ................
rim clamp (16 x 5.50F) (use w/wheel
assy. 3812711, 2428262)
..........
rim clamp (15 x 5.50F) (use w/wheel
assy. 3778052-3778055-3785013)...
rim side (15 x 5.50F) (use w/wheel
assy. 3778052-3778055-3785013) ...
3 681 7 86-3 6 844 5 4-3 778924-3 82 961 6 ..
rim side (15 x 5.50) (use w/wheel
assy. 2495738-40)
rim side (16 x 6) (use w/3860964) ....
rim side (16 x 6)
................
...................
3704948 A.R.
9.95
A.R.
3.25
3778058 A.R.
2.55
2406653
A.R.
4.90
2284287! A.R.
7.30
2495743 A.R.
3906582 A.R.
22190560 A.R.
3.30
2059902
5.50
BEARING ASSY.-BEARING UNIT-CONE-CUP-SHIM, Rear Wheel
.......................
outer (inner race stamped Hy KB11786,
.......................
out race Hy 11786 Y)
inner (inner race stamped Hy KD 12051,
UTILITY
1/2 TON (exc. 2-SPD.) (1st Ser.),
Ser. 30 w/11000 lb. axle .........
UTILITY
1!Z TON (exc. 2-SPD.) (1st Ser.),
Ser. 30 w /11000 lb. axle .........
',a, 1 TON
'q, 1 TON
1 TON w/2-SPD. (1st Ser.),
2 TON (1st Ser.)
1 TON w/2-SPD. (1st Ser.),
2 TON (1st Ser.)
COMM.,
1
:2 TON (exc. P/Trac.),
Ser. 10,
Ser. 10 (4/WD) (1st Ser.) .........
PASS.,
CORVETTE
'Z TON w/P/Trac ................
CORVETTE ....................
CORVETTE ....................
Ser. 10 (4/WD) (2nd Ser.),
PASS. w/12 bolt,
PASS. w/10, 12 bolt,
G-20 ...........................
G-10 w/3.36 ratio,
G-10, 4.11 ratio (w/P/Trac.),
PASS. w/10 bolt ................
G-10 w'3.73 ratio,
G-10 w/P/Trac., 4.11 ratio,
G-10 w/4.11 ratio (exc. P/Trac.) ..
PASS.,
CORVETTE ....................
PASS.,
CORVETTE ....................
PASS., CORVETTE,
TAXI,
CORVETTE,
CORVETTE w%P/Trac...........
TAXI, POLICE .................
PASS. (exc. TAXI),
CORVETTE (exc. P/Trac.).......
PASS. (exc. TAXI, POLICE)......
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
......................
......................
................
................
....................
©-1967
...............
144525
2
10.42
144527
188930
188932
2
2
2
13.69
(5.536)
10.78
inner (stamped Hy B 12235YK) .......
7450320
2
28.95
outer (stamped Hy KA 11950Z) .......
7450323
2
15.77
outer, w/roller (Hy OR 1502) .........
111121
2
9.54
outer, w/roller(Hy OR 1500) .........
(ND 88128 35/32 O.D. x 1/ I.D.)......
I D.)
inner (Hyatt A-200233-Z) ............
outer ...........................:.
111119
954848
7451202
7450700
2
8.25
2
9.96
2 (5.447)
2 (6.311)
(Hy 1559 TS) ......................
7451275
2
4.14
....................................
7451405
2
3.66
w/roller ...........................
7451459
2
6.06
BEARING UNIT, roller bearing.........
7451414
2
18.97
BEARING UNIT, w/retaining ring ......
BEARING UNIT, w/retaining ring ......
3799122
3799123
2
2
11.28
11.62
BEARING UNIT, w/retaining ring
(Hy JRN 1542 WAB-27)..............
7451415
2
20.57
BEARING UNIT, w/retaining ring
(NDRW 607BRSYIZ) ................
CONE, w/roller, outer (Hy A-141236Z) ..
CONE, inner.........................
CUP, outer bearing outer (Hy A-1412362)
CUP, inner ..........................
SHIM, rear wheel bearing (.097) ........
SHIM, rear wheel bearing (.103) ...... _ .
SHIM, rear wheel bearing (.109) ........
907294
7450699
7451205
7450698
7451206
3820233
3820232
3820231
2
2
2
2
1
1
1
1
13.50
(6.314)
(5.447)
(6.316)
(5.447)
.25
.25
.25
..............
outer race Hy 12051 Z)
inner (Hy D11786) (Hy 11786Y) .......
outer (Hy B 11630) (Hy 11630 Z) .....
5.839-5.855
921
63-67
63-67
63-67
63-67
63-67
63-68
....................
....................
....................
....................
....................
CORVETTE ....................
CORVETTE
CORVETTE
CORVETTE
CORVETTE
CORVETTE
SHIM, rear wheel bearing
(.115)
(.121)
(.127)
(.133)
(.139)
(.145)
........
, , ,, , , , ,
........
........
, , , , , , ,,
........
3820230
3820229
3820228
3820227
3820226
3820225
1
1
1
1
1
1
.25
.25
.25
.25
.25
.25
front (2 3 e-16thd.) ................
365120
2
.80
.) ....................
3744926
2
61
front (4'/2 O.D.) .....................
3650731
2
1.25
front(2 5/ 6O.D.) ....................
3768604
2
.65
rear hub and grease (plain 4 23/„ O.D.)
rear (plain-5'/ 2 O.D. w/5 holes 23/,) ..
front(2"/, O.D.) ...................
front(23,,, O.D.) ....................
front (3532 O.D.) (Dana 32001) ........
3779771
3874373
3707121
3747221
2405965
2
2
2
2
2
.75
1.13
.61
1 20
.98
front (1',,a deep x 2 1/ O.D.) ...........
3820832
2
.60
front (1 1/4 x 2'/32 )
...................
3775190
2
.63
chrome (1111 6O.D.) .................
chrome(9 7O.D.) ...................
chrome (99j6 O • D •).• ................
st. steel (less spinner) ..............
!
st. steel (10 Y O.D.) ...............
thistle gray (901 O.D.) ...............
thistle gray (11 1, 6 O.D.) .............
chrome
O.D.) ...................
chrome (10 11 6 O.D.) ................
ivory(9 3/, O.D.) ....................
chrome (white-9 3/4 O.D.) .............
ivory (10 15/ 6O.D.) ..................
chrome (white_10 15/ 6 O.D.) ..........
chrome w/black trim (10 1 1 6 O.D.). , , , .
3680919
3683021
3696493
3716754
3707030
3702898
3702899
3699748
3716713
3717766
3715992
3717767
3716785
3721966
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.40
4.95
4.70
20.30
5.35
4.95
4.95
4.95
4.80
4.75
4.95
4.75
6.00
4.75
5.858 GREASE CAP-HUB CAP-COVER-COVER UNIT, Wheel
GREASE CAP
38-42 UTILITY (exc. COE),
43-59 '/, TON w,'dual wheels, (exc. D-D),
46-59 1 TON (exc. SBC, UJ, UK, VJ,
VK, H.D.),
55-59 D-D w'dual wheels (2nd Ser.),
60-66 Ser. 30,
65-66 Ser. 20 w/6.50 x 16-6 ply,
67
67
Ser. 30 (exc. 133 W.B.,
11000 lb. axle)
38-42 PASS., COMM. (exc. HA),
46-54 PASS.,
46-59 1 2 TON (exc. 4/WD),
53-62 CORVETTE,
56-60 PASS.,
60-61 Ser. 10 (exc. 4/WD),
63-66 Ser. 20-30 (exc. 4 /W'D, D-D),
67-68 Ser. 20-30 (exc, D-D,
4 WD, 11000 lb. axle),
67-68 G-20 ...........................
39-40 COE,
41-42 UTILITY w/H.D.,
46-55 2 TON (1st Ser.),
46-55 1'i TON (1st Ser.),
46-59 SBC (exc. 1'i TON),
48-0. 5 1'2 TON w'H.D. (1st Ser.),
6 7Ser. 30 (D-D) (w/11000 lb. axle)...
46-62 ',, 1 TON (exc. 4/WD),
63-66 Ser. 20-30 (D-D),
67
Ser. 20-30 (D-D) (exc. 11000 lb.
axle) ........................
47-53 UTILITY,
54-55 1!z TON (exc. 2-SPD.) (1st Ser.),
67
Ser. 30 w'11000 lb. axle .........
54-55 1', TON «,'/2-SPD. (1st Ser.) ......
PASS . .........................
55
57-59 4 WD ..........................
60-68 Ser. 10 (4 'WD)
60-61 Ser. 20 (4; WD) (exc. H.D. axle),
62-68 Ser. 20 (4 ! WD)
61-68 PASS.,
62-68 Ser. 10, G-10 (exc. 4/WD),
63-68 CORVETTE
...............
..................
..................
....................
front (25/64
O.D
HUB CAP
46-53 'a, 1 TON ......................
47-53 ' TON .........................
51-53 PASS. (exc. C)
53-55 CORVETTE
54
PASS. (exc. C) ..................
54-55 2 TON (lst Ser.) ................
54-55 'y, 1 TON (1st Ser.) ..............
54-55 'z TON (1st Ser.) ................
55
PASS. (exc. C)
55
l,2 TON (2nd Ser.)
55-56 ' z TON (2nd Ser.) ................
55 „ 1 TON (2nd Ser.) .............
55-56 ';, 1 TON (2nd Ser.) (exc. D-D)....
56
PASS. (exc. C) ..................
..................
....................
..................
................
5.855-5.858
922
©-1967
56-58 CORVETTE
56
.
2 TON .........................
34,
56
1 TON (exc. duals, D-D) .......
57 PASS. (exc. C) .................
57-60 '2 TON (exc. 4/WD) ..............
57 -60 '; TON (exc. 4/WD) ..............
57-60
, 1 TON (exc. duals, D-D).......
57-60 ',, 1 TON (exc. duals, D-D).......
58
DELRAY, YEOMAN, BISCAYNE,
BROOKWOOD, CORVETTE.....
58-59 Ser. 3A w/4WD (exc. locking hub
equip.) .......................
59-60 ' 2 TON (4 'WD w/locking hub) .....
59
Ser. 3E-3G (4WD w/locking hub),
60 Ser. 20 (4 'WD w /locking hub) .....
59-62 CORVETTE (exc. 15 x 5'/2 K wheel)
59-62 CORVETTE w/15 x 5 1/2 K wheel,
59-60 PASS . .........................
61-62 PASS . .........................
61-62 Ser. 10 (4/WD) (exc. 16x 5K wheel) .
61-62 Ser. 10 (4 WD) (exc. 16 x 5K wheel)
61-62 Ser. 10 (exc. 16 x 5K wheel) ......
61-63 Ser. 10 (exc. chrome bumper, 4/WD,
6.50 x 16, 7-17.5, 7.00 x 15-6
ply tires) .....................
61-63 Ser. 10 w/chrome bumper (exc.
4 'WD, 16 x 5 wheels) ..........
st. steel ..........................
black and white (9'i; O.D.) ...........
black and white (10 5 ,' fi O.D.) .........
9.75
4.75
4.95
3731847
4
4.65
black on white (9 34 O.D.) ............
3734031
4
4.75
chrome (9(O.D.)
..................
3734032
4
7.50
black on white (10'5-^ 6 O.D.)..........
chrome (10 15/ 6 O.D.) ................
3743591
3743592
4
4
4.75
7.50
crossed flags-3 fins ................
3744075
4
4.90
black emblem on beige ............ .
frt. wheels ........................
3752954
3765832
2
2
4.75
4.75
frt. wheels ........................
10 slots ...........................
3765837
3759120
2
4
4,75
10.95
crossed flags-6 fins (chrome)........
chrome-4 fins (10'1 6 O.D.) ..........
front-white (10 234 2 O.D.) ............
rear wheels,
wheel carrier hub,
3772740
3783206
3781648
4
4
2
4.67
4.60
3.75
3780114
A.R.
3.85
3780115
A.R.
6.75
3781650- A.R.
4.85
3781649
2
4.75
3781675
A.R.
7.50
A.R.
8.25
A.R.
2
4.95
4.95
front and rear wheels (red on white)
23
(10 /32 O.D.) .....................
wheel carrier hub,
front and rear wheels (chrome-1016
O.
wheel(exc. 4 'WD) .............
4
4
4
....................................
D.) ...........................
61-63 Ser. 10 w;'6.00x 16, 6.50x 16, 7.00
x 15, 7-17.5-6 ply tires .......
front and rear,
61-63 Ser. 10 (STEPSIDE) w/16 x 5K
wheel carrier hub (red on white)
wheel (exc. chrome bumper).....
(1023/32 O.D.) .....................
tNOTE: It may be necessary to paint in order to match.
61-62 Ser. 10 (4%WD) w/6.50 x 16, 7-17.56 ply tires ....................
front wheels (white-10 2 2 O.D.)......
61-62 Ser. 10 (STEPSIDE) w/chrome
bumper ......................
61-63 Ser. 10 w/chrome bumper, 16 x 5K
3725238
3725574
3725576
wheel carrier hub,
front and rear (chrome w/red center)
(10232 O.D.) .....................
61-63 Ser. 20-30 w/chrome bumper (exc,
4 W D) .......................
61-63 Ser. 20-30 (exc. 4/WD w/locking
hub) .........................
61-62 Ser. 20 (4 /WD) w/locking hub .....
wheel carrier hub, front and rear
(chrome w/red center) (10 2 3/37 O.D.) . 3781676
wheel carrier hub, front and rear wheels
(red on white) (10/32 O.D.) ........ 3781651
front (red on white) (10 2 3/3 , O.D.) ...... 3781652
63
front and rear (10"/ 6 O.D.)...........
3821120
4
4.48
front and rear ......................
3840978
4
4.75
front and rear, wheel carrier.........
3875624
A.R.
5.50
front and rear, wheel carrier .........
3875621A A.R.
4.10
front and rear, wheel carrier .........
3875622
A.R.
7.25
front and rear, wheel carrier wiclips ..
3875623A A.R.
7.25
wheel carrier......................
3875625A A.R.
4.10
front and rear
(923/32
3875629 A.R.
3.30
front and rear
.....................
3875630A
4
4.75
3875631
4
3.10
PASS ..........................
64
PASS.,
64
SUPER SPORT w/chrome wheel.
64-66 Ser. 10, G-10 w/chrome bumper
(axe. 16 x 5K wheel, 4/WD).....
64-66 Ser. 20-30 (exc. chrome bumper,
4 WD, 18 x 5 wheel) ...........
64-65 Ser. 20-30 w;'chrome bumper
(exc. 4/WD) ..................
64-66 Ser. 10 w 'chrome bumper, 14 or 15
inch clipless wheel (exc. 4/WD).
64-65 Ser. 10 w/7.00 x 15-6 ply, 7-17,
5-6 ply (axe. 4/WD)............
64-66 Ser. 10 (STEPSIDE) w/16 x 5K
wheel (1st design) (axe. chrome
bumper) ......................
64-66 G-10 (7.00 x 13-8 Ply) (axe.
chrome bumper, custom equip.) .
64-66 G-10 w/chrome bumper, custom
equip., 13" wheels ............
64-66 G-10 (1st design) (axe. chrome
bumper, custom equip. 14" wheel)
front and rear,
front and rear (white) (9 2 Y,, O.L.) .....
-1 967
5.858
O.L.)............
923
64-65 Ser. 10, 010 (exc. chrome bumper,
4/ WD)
front and rear, wheel carrier,
66
Ser. 10 w/700 x 15, 700 x 17.5
(exc. 4/WD)
front and rear,
66
Ser. 10 (STEPSIDE) w/16 x 5K
wheel(2nd design)
wheel carrier
65
PASS .
front and rear, w/painted emblem .....
66
PASS
front and rear......................
67
PASS. (exc. S.S., CAPRICE,
discbrakes)
67
Ser. 10, G-10-20 w/chrome bumper
(exc. D-D,4/WD)
67
Ser. 10 (w/chrome bumper 7 x 17.5)
wheel carrier
67
(exc. aluminum, POLICE) ......
(2-piece)
67
POLICE w'15" wheel
67
Ser. 20-30 (exc. 4/WD, chrome
bumpe
front and rear,
67
Ser. 20-30 (CONY.) (STEPSIDE)
(exc. chrome bumper)
wheel carrier (16 x 5)
67
Ser. 20-30 (CONY.) (STEPSIDE)
(w/chrome bumper)............
wheel carrier,
67
Ser. 20-30 (CONY.) (w/chrome
bumper)
front and rear......................
67
Ser. 10, G-10-20 (exc. 4/WD) ......
front and rear,
67
Ser. 10 (STEPSIDE) (exc. D-D,
4 /WD, 7 x 17.5)
wheel carrier
67
Ser. 10 (exc. 4/WD, chrome
bumper)
front and rear
67
Ser. 10 (STEPSIDE) w/7 x 17.5
4/WD, chrome bumper) .........
wheel carrier
68
PASS. (exc. CAPRICE, disc brake)
68
CORVETTE,
68
PASS. «'/disc brake, spec. wheel ..
68
Ser. 10 (CONY.) w/chrome (exc.
7.00 x 17.5) ..................
....................................
68
Ser. 10 (CONY.) (exc. chrome, 7.00
x17.5) .......................
....................................
68
Ser. 10 (CONY.) w/chrome, 7.00
x17.5 .......................
....................................
68
Ser. 10 (CONY.) w/7.00 x 17.5
(exc. chrome)
68
Ser. 20-30 (CONY.) (exc. chrome) ..
68
Ser. 20-30 (CONY.) w/chrome .....
A.NOTE: Embolished circle and lower center section around emblem.
.......................
..................
............
......................
.........................
..........................
.................. ....................................
.............. ....................................
......................
..........................
............ ....................................
r) ......................
..........
...............
......................
...............
......................
......................
......................
....................................
....................................
................. ....................................
....................................
....................................
3875620A A.R.
3871108 A.R.
3875027
4
3.10
4.25
4.48
3893336
4.65
4
3894203 A.R.
3894207 A.R.
6.95
7.50
3901712
3908672
4
A.R.
3.75
4.95
3894209
A.R.
4.50
3894210
A.R.
7.50
3894201
A.R.
3.50
3894206
3916402
A.R.
4
4.50
4.95
3925802
4
3930245
A.R.
3930244
A.R.
3930248
A.R.
3930247
3930250
3930251
A.R.
A.R.
A.R.
3698231
3708308
4
4
9.25
9.95
3715378
4
9.95
3722302
3728997
3732696
3744076
3760050
3769530
3783336
3803938
3826516
3816540
3819934
4
4
4
4
4
4
4
4
4
4
4
9.50
15.10
9.25
9.15
9.25
9.00
9.15
10.25
14.30
10.25
9.40
3827419*
4
12.45
3821121
4
9.15
3830638k
4
15.25
COVER-COVER UNIT (Full Wheel)
53
54
55
55
56
60-61
56
57
58
59
60
61
61
62-63
62
62
63
63
63
.........................
.........................
...............
...............
PASS .
(st. steel) (15 1/8 O.D.)
PASS .
(st. steel) (15'/8 O.D.)
PASS.,
Ser. 3 (2nd Ser.) ................. ....................................
PASS., '/z TON,
Ser. 10 (exc. 4/WD) ..............
(st. steel-15'/32O.D.) ...............
PASS. w/wire wheel .............
....................................
PASS . .........................
(st. steel) .........................
PASS . .........................
....................................
PASS . .........................
(st. steel).........................
PASS . .........................
(crossed flags-8 fins) (chrome) ......
PASS. (exc. SUPER SPORT) ......
....................................
IMPALA (SUPER SPORT) ........
....................................
PASS. w/wire wheels ............
....................................
IMPALA (S.S.) (exc. wire wheels) .
....................................
PASS. (exc. S.S., wire wheels) ....
....................................
IMPALA (S.S.) (exc. wire, chrome
wheels) ...................... ....................................
*NOTE: Cover is a complete assembly.
PASS. (exc. S.S., wire, chrome
wheels) ......................
....................................
CORVETTE (1st design) (exc.
Sp. Per.) .....................
(aluminum) .......................
+NOTE: Includes 6 ribs, ornament, reinforcement and 15 screws.
5.858
©-1967
924
63
CORVETTE (2nd design) (exc.
Sp./Per.)
64
PASS. (S.S.) (exc. wire, chrome
wheels) ......................
64
CORVETTE (1st design) .........
64
CORVETTE (2nd design).........
64
PASS. (exc. S.S., wire, chrome
wheels) ......................
64-66 PASS., G-10 w/wire wheels.......
65
PASS., G-10 (exc. S.S., CAPRICE,
wire, mag. wheels)
65
CORVETTE
65-66 PASS. w;mag. wheels
65
S.S., CAPRICE (exc. wire, mag.
wheels),
66
S.S. (exc. wire, mag. wheels) .....
66
PASS., G-10 (exc. S.S., CAPRICE,
wire, mag. wheels)
66
CAPRICE (exc. wire, mag.
wheels) ......................
66
CORVETTE
67
S.S. (exc. wire, mag. wheels,
discbrakes)
67-68 Ser. 10, G-20 w/wheel carrier
(exc. 4/WD) ..................
67-68 PASS. w/14" wire wheels ........
67
PASS. w/14" wheels (exc. S.S.,
CAPRICE)
67-68 PASS. w/14" mag. wheels ........
67-68 G-10 ...........................
67
CORVETTE w/15 x 6L aluminum
wheel ........................
67
CAPRICE (exc. disc brakes, mag.
wirewheels)
67-68 PASS. w/disc brakes
68
PASS. (exc. CAPRICE, S.S.) w/14"
wheel ........................
68
CAPRICE (exc. sim. wire, mag.
discbrake)
68
PASS. w/sim. mag. wheels .......
68
PASS. w/14" sim. wheels ........
68
CORVETTE
Ser. 10 w/chrome
68
68
CAPRICE, S.S. (exc. 427) ........
65-66 PASS. w/mag. wheels............
65-66 G-10 w/13" wheels
67
Ser. 10, G-20 w/15" wheels
(exc. 4/WD),
68
Ser. 10 (D-D), G-20
67
PASS. w/14" wheels (exc. S.S.,
CAPRICE)
67-68 PASS. w/14" mag. wheels ........
67-68 PASS. w/14" wire wheels ........
67-68 G-10 w/14" wheels ..............
68
PASS. (exc. CAPRICE) w/14"
wheel........................
68
PASS. w/14" mag. wheel .........
68
Ser. 10 (CONV.) .................
=NOTE: Consists of four covers (full
.....................
(chrome)
..........................
3843538
4
16.25
3849435
3849557
3862137
4
4
4
12.85
15.25
13.80
3840980
3834904
4
4
6.05
25.35
3860204
3865938
3872861
4
4
4
9.30
13.80
21.80
3893599
4
14.65
3875029
4
9.30
3875033
3888813
4
4
11.10
13.80
3893358
4
8.75
3893006
3903059
4
4
7.95
25.35
....................................
3893361
3903086
3895218
4
4
4
8.50
21.80
7.95
....................................
3910731
4
17.25
.................. ....................................
............ wheel trim (15 x 5J) ................
3893350
3901704
4
4
8.75
....................................
3916408
4
8.95
....................................
..........................
...........................
(chrome)
(silver)
....................................
........................
............ ....................................
.................... ....................................
............ ....................................
w/ornament
....................................
............ ....................................
....................................
.................... w/ornament ........................
.................. ....................................
....................................
....................................
................... ....................................
....................................
................... ....................................
....................................
outer .............................
.................... ....................................
................ ....................................
....................................
COVER UNIT ........................
.............. COVER UNIT........................
..............
...................
5.864
3916415
4
3918080
4
3924476
4
3923630
4
3933254 A.R.
3930774
4
986417# 1
986123# 1
9.25
22.25
N.L.
N.L.
COVER UNIT........................
987095#
1
N.L.
COVER UNIT .......................
COVER UNIT ........................
COVER UNIT ........................
COVER UNIT........................
986829
987067#
987042#
9868414
1
1
1
1
N.L.
N.L.
N.L.
N.L.
COVER UNIT........................
COVER UNIT ........................
COVER UNIT........................
wheel).
987199
987245
987478
1
1
1
594129
30
.05
595648
A.R.
.05
3704844
3728998
A.R.
30
.05
.29
SPRING—CL IP—CLIP ASSY.—BUMPER, Wheel Hub Cap Lock
38-42 COMM. (exc. KE, KF, AM, AN,
BM, BN),
46-65 ' L2 TON,
62
% TON ........................
38-39 PASS., COMM. (exc. JA, JB, JC, JD)
41-68
, 1 TON (exc. AL, BL) .........
39-53 PASS. (exc. C) .................
39-63 '2 TON ........................
PASS ..........................
56
c-196
(15-17.5 in. wheel) .................
(with 16 in. wheel),
(with 17, 17.5, 18 and 19.5 in wheel).
(w/15 in. wheels),
(w/16 in. wheels )..................
CLIP, wire wheel trim ring ............
5.858-5.864
925
67
wheel
55-56 PASS., '.z TON,
57-60 ' 2 TON
PASS
56
........................
........................
..........................
.....................
CLIP ASSY., wheel trim ring ..........
CLIP, wheel trim
3910733
A.R.
25
BUMPER, wire wheel trim ring .........
3741878 A.R.
3720623 30
33
05
front wheel (3 /e I.D. x 4Yz O.D.) ......
3650732
2
05
rear wheel (3 "/3 z I.D. x 311/
3685199
2
.25
5.866 GASKET, Wheel Hub Cap
39-40 COE,
41-42 UTILITY w/H.D.,
46-55 SBC, 2 TON (1st Ser.),
48-55 1'2 TON w/H.D. (1st Ser.) ........
47-53 UTILITY,
54-55 1 TON (1st Ser.) (exc. 2-SPD.),
67
Ser. 30 w /11000 lb. axle .........
1
....
5.871 RING-EMBLEM-INSERT-ORNAMENT-ORNAMENT ASSY.-HUB ASSY.RETAINER-WASHER-REINFORCEMENT-RIB-SCREW-NUT ASSY.SPOKE ASSY.-INSULATOR-SPACER-RING ASSY., Wheel Cover Appearance
56
PASS.,
56-59 ' 2 TON,
60
Ser. 10-20 (exc. D-D, 4/WD) , , , , , ,
wheel trim (w/15 x 5 wheels) ........
3723556
4
6.20
54
PASS.,
57-60 PASS . ......................... EMBLEM, hub cap (part of 3750384) ....
3708310
4
1.13
61
PASS. (exc. S.S.)
EMBLEM (crossed flags-black plastic) . 3783339
4
.92
62
PASS. (exc. S.S.)
EMBLEM (blue plastic)
3789926
4
.92
63
PASS. (exc. S.S.)
EMBLEM
3821123
4
.89
64
PASS. (exc. S.S.)
EMBLEM
3843120
1.21
4
64-66 CORVETTE w/knock off wheels .. EMBLEM, wheel lock nut
3853825
1
8.95
65-66 S.S . ........................... EMBLEM
3860217
4
.58
1
65
G-10 w 13" wheels
EMBLEM
3840306
4
1.69
65
PASS.w/14
(exc. S.S.),
65
G-10
wheels
EMBLEM
3860206
4
1.90
66
PASS., G-10 (exc. S.S., CAPRICE)
EMBLEM
3875031 A.R.
1.90
65
CAPRICE (exc. simulated wire whl.) INSERT
3876968
4
.58
67
PASS. (exc. S.S., CAPRICE) ...... INSERT, trim cover
3893362
4
1.75
67
S.S. (exc. wire, mag. disc brakes).. INSERT, wheel cover
3893359
4
1.75
67
CAPRICE (exc. disc brakes, mag.
wire wheels)
INSERT
3893355
1
1.75
56-62 CORVETTE
ORNAMENT (knock-off)
3725239
4
5.80
61
S.S . ..........................
ORNAMENT (knock-off)
3787679
4
3.34
62
S.S . ........................... ORNAMENT (knock-off) ...............
3815101
4
3.34
62-63 PASS. w wire wheel covers ....... ORNAMENT ......................... 3814757
4
2.35
63
S.S . ........................... ORNAMENT ......................... 3827394
4
2.00
63
CORVETTE (exc. knock-off wheels) ORNAMENT ......................... 3825469
4
3.34
64
S.S. (exc. wire wheel cover) ...... ORNAMENT ......................... 3840974
4
3.54
64
4
3.40
64-66 PASS . ......................... ORNAMENT, wire wheel cover spinner , ,
3859647
4
2.27
65-66 CAPRICE, S.S. (exc. wire wheel
cover) ....................... ORNAMENT ......................... 3860215
4
3.70
65
4
4.35
66
4
4.27
67
(exc. aluminum),
68
PASS . ......................... ORNAMENT, hub cap ................. 3901715
4
1.75
67
wheel........................ ORNAMENT ......................... 3908161
4
3.25
67
PASS. w/wire wheels ............ ORNAMENT ......................... 3908762
4
59-60 PASS. w/deluxe equip............ ORNAMENT ASSY., hub cap
(2 lug knock-off) ................... 3756545
4
4.60
58-60 PASS. (production) .............. ORNAMENT ASSY., hub cap
(3 lug knock-off) ................... 3750384
4
3.50
63
S.S............................
ORNAMENT ASSY., wheel cover, w/hub. 3827393
4
6.80
67-68 Ser. 10 (CONV.) (exc. PICK-UP),
67-68 Ser. 10 (STEPSIDE) w/wheel
carrier....................... ORNAMENTASSY . .................. . 3913125 A.R.
1.75
68
CORVETTE (exc. wheel trim cover),
68
PASS., w 'disc brake, spec. wheel . ORNAMENTASSY ................... . 3925805
4
64
S.S. (exc. wire wheel)............ HUB ASSY., wheel cover .............. 3841192
4
3.30
5.864-5.871
C-1967
926
................
................
................
................
..............
..............
..................
....................
...............
............................
............................
..............
............................
............................
............................
............................
.............................
...................
.................
.............................
...............
...............
....................
..........................
..........................
PASS ..........................
CORVETTE
68
57
PASS
59-60 PASS
58-60
wheel
56-62 CORVETTE
67
61
62-63
63
64
64
65-66
........................
....................
S.S . ...........................
S.S . ...........................
CORVETTE (exc. knock-off wheels)
S.S . ...........................
CORVETTE ....................
CAPRICE, S.S. (exc. wire wheel
cover) .......................
PASS.,
PASS.,
(exc, aluminum),
68
PASS. w/mag. wheel
64
S.S. (exc. wire wheel cover) ......
65-67 PASS. w/simulated wire wheel. , ..
66
63
62-63
65-66
67
.............
68
63
63
64-66
64-66
65-67
65-66
67-68
65-66
66-67
67-68
67
67-68
67
68
68
....................
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
CORVETTE ....................
CORVETTE
PASS. w/14" wire wheels........
PASS. w/14' 1 wire wheels ........
PASS. w/14" wire wheels ........
PASS. w/simulated wire wheels...
CORVETTE (exc. knock-off whls.)
PASS. (w /disc brakes, 15 x 5J) . ..
PASS. (STA. WAG.) w/disc brakes,
PASS., w(15 x 6J wheel (exc. STA.
WAG., CAPRICE),
CORVETTE w/15 x 6JK wheel....
PASS . .........................
CORVETTE ....................
....................
HUB, wheel cover
RETAINER, hub cap ornament .........
RETAINER, hub cap ornament
(use w/3756545) ...................
RETAINER, hub cap ornament
(use w/3750384) ...................
3923631
3736339
4
4
.58
3756544
4
.42
3750386
4
.24
..........................
...................
..................
...................
...................
...................
...................
REINFORCEMENT ...................
REINFORCEMENT ...................
RETAINER
WASHER, wheel cover reinforcement
(stainless steel)
REINFORCEMENT
REINFORCEMENT
REINFORCEMENT
REINFORCEMENT
REINFORCEMENT
3910734
5
2.25
3726529
3796671
3820017
3825470
3840976
3843391
4
4
8
4
4
4
.75
.37
.18
.18
.18
.15
RIB ................................
3860216
3876547
3825471
4
4
24
.19
.20
.97
SCREW, wire wheel cover ornament
(8-18 x °/ 6 ) (hex. hd.-spherical face). .
SCREW, wheel trim cover hub ( 5/, x 18)..
8
x
SCREW, trim spinner ornament (8-1
3824195
9420686
16
.05
12 (8.977)
'/s) ................................
385958
16
.04
SCREW, wheel cover ornament, wheel
coverhub
NUT ASSY., right (w/knock-off wheels) ,
NUT ASSY., left (w/knock-off wheels) ,,
NUT ASSY., right (w/knock-off wheels) .
SPOKE ASSY., inner
SPOKE ASSY., outer ..................
SPOKE ASSY., outer
..................
3
9
INSULATOR (1 3/4 x 3 /- /3 , thk.) ........
SPACER, wheel cover ornament ........
RING ASSY., wheel trim ...............
9416704 48
.09
3819543
2 (5.813)
3819544
2 (5.813)
2 (5.813)
3853795
3853796
2 (5.813)
3874683 A.R.
.44
3874686 A.R.
.49
3905786 A.R.
.45
3782302 A.R.(3.704)
.95
3876548 A.R.
3901704
4
8.75
RING ASSY., wheel trim...............
3901708
3918081
3923626
4
4
4
8.75
tubeless tire, snap in type (1'/8 O.L.)..
tubeless tire, snap in type (2 27/64 O.L.)
tubeless tire, snap in type (2 5 % 4 O.L.)
tubeless tire, snap in type (1'/4 O.L.), ,
273232
274119
274561
274083
5
5
5
5
.77
.92
1.06
.77
EXTENSION, tubeless tire valve stem ..
9417466
A.R.
.50
EXTENSION, tubeless tire valve stem
(142 O.L.) .........................
9417730
4
.50
EXTENSION, tubeless tire valve stem
('/8 O.L.) ..........................
9417745
4
.50
9422212
4
.44
.........................
..................
5.875 STEM ASSY.-EXTENSION-WASHER-NUT-CAP, Tire Valve
55-56 PASS., CORVETTE, /2 TON,
57-62 CORVETTE, '4 TON .............
57
PASS ..........................
58-59 BEL AIR, IMPALA, NORMAD. , , . ,
ALL ALL ...........................
57-61 PASS.,
62-63 PASS. w/14" wheel ..............
PASS.,
62
64-67 PASS., (exc. S.S.) ...............
67
Ser. 10 (exc. 4/WD) .............
63-68 PASS. (exc. wire wheel covers),
65
S.S . ...........................
66-67 G-10 ...........................
67-68 PASS.,
67-68 G-20, Ser. 10 (exc. 4/WD) ........
56-59 Ser. 3 ..........................
56-59 Ser. 3 ..........................
ALL ALL, CORVETTE ...............
-1967
EXTENSION, valve stem ..............
WASHER, tubeless tire stem (brass)
3
( 13/32 I.D. x /a O.D. X'6 6 thk.
w/rolled edges) ....................
NUT, tubeless tire stem (brass) ("/32 -28)
CAP (type "F"- 3/8 O.D. x 37/64 long) .....
273608 A.R.
273609 A.R.
3171598
5
.15
.15
.15
5.871-5.875
927
5.880 INFLATER ASSY.
ALLALL ...........................
....................................
5.880
928
3891441
4.95
©- 1 967

CHEVROLET PARTS AND ACCESSORIES CATALOG

Transcription

Similar documents

kona australia - Groupe Sportif

professional floor sanding products

GM RPO list Nov02 - Norton Community