SABICInnovative Plastics Pittsfield, Massachusetts, USA

Comments

Transcription

SABICInnovative Plastics Pittsfield, Massachusetts, USA
@
CERTIFICATE OF APPROVAL
This is to certifythat the EnvironmentalManagement System of:
SABICInnovative Plastics
Pittsfield, Massachusetts, USA
has been approved by Lloyd's RegisterQuality Assurance
to the following EnvironmentalManagement SystemStandard:
ISO 14001:2004
The Environmental Management Systemis applicable to:
Worldwide Manufacturing, Compounding and Extrusion of:
Engineered Thermoplastic Resins, Compounded Plastics Products ([email protected],
[email protected],[email protected], Noryl [email protected],Noryl [email protected],[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],CEP@,[email protected],[email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], and [email protected]); and Specialty Film and Sheet
Products ([email protected], [email protected], [email protected], [email protected], [email protected], LTC
[email protected], [email protected], Lexan [email protected] Sheet, [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected] and [email protected]).
This certificate is valid only in association with the certificate schedule bearing the same
number on which the locations applicable to this approval are listed.
Approval
Certificate No: UQA 0113313
Original Approval:
Current Certificate:
Certificate Expiry:
April 1, 2001
August 31, 2007
April 30, 2010
document is subject to the provision on the reverse
1401 Enclave Parkway, Suite 200, Houston Texas 77077 USA
This
This approval
is canied out in accordance
with the lRQA assessment and certification
M_ftevhion1J
procedures
and monitored by LRQA.
@
CERTIFICATESCHEDULE
SABIC Innovative Plastics
Locations
Activities
Pittsfield, Massachussetts, USA
Manufacturing, Compounding and Extrusion
of Engineered Thermoplastic Resins,
Compounded Plastics Products ([email protected],
[email protected],[email protected], Naryl [email protected],Naryl
[email protected],[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected],[email protected], [email protected],[email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], and [email protected]);and Specialty Film and
Sheet Products ([email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected], [email protected],
Lexan [email protected] Sheet, [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected] and [email protected]).
Wiener Neustadt, Austria
Extrusion of Thermoplastic Sheet and Film
([email protected] Sheet, [email protected], [email protected],
[email protected], Lexan [email protected] Sheet and
[email protected]).
Dandenong, Australia
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], [email protected],
[email protected], [email protected], [email protected], [email protected] and
[email protected]).
Page 1 of 6
ApprovalCertificateNo: UQA0113313
This document is subject to the provision on the reverse
1401 EnclaveParkway,Suite 200, Houston Texas 77077 USA
This approval is carried out in accordance with the lRQA assessment and certification procedures and monitored by LRQA.
MKro
R8Yision 11
@
CERTIFICATE SCHEDULE
SABIC Innovative
Plastics
Locations
Activities
Cobourg, Canada
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], [email protected],
[email protected], [email protected], [email protected], [email protected] and
[email protected]) Sheet ([email protected], [email protected] and
[email protected]), and Film ([email protected]).
Nansha, China
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], Noryl [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected], [email protected]); Extrusion of
Thermoplastic Sheet and Film ([email protected],
[email protected], and [email protected] ).
(Waigaoqiao FreeTradeZone) Shanghai,
China
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected] and [email protected]).
Beauvais, France
Manufacture, Compounding, and Extrusion
of ESREngineered Thermoplastic Resins and
Compounds ([email protected], [email protected] and
[email protected]).
Fosses, France
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected],
[email protected], [email protected], [email protected],
Thermocom [email protected]).
Page2 of 6
ApprovalCertificate
No: UQA0113313
Thisdocumentissubjectto the provisionon the reverse
1401 EnclaveParkway,Suite 200, Houston Texas77077 USA
This approval is carried out in accordance with the LRQAassessment and certification procedures and monitored by LRQA.
MKtoR8vislon1J
@
CERTIFICATE SCHEDULE
SABIC Innovative
Plastics
Locations
Activities
Baroda, India
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], [email protected],
[email protected], [email protected] [email protected] and [email protected]).
(Olgiate Olona)
Milan, Italy
Extrusion of Thermoplastic Solid Sheet and
Multiwall Sheet ([email protected], [email protected],
[email protected] and [email protected]).
pontirolo, Italy
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], [email protected],
[email protected], [email protected], [email protected],[email protected], [email protected], [email protected] and [email protected]).
Chung-ju, Republic of Korea
Compounding and Extrusion of Engineered
Thermoplastic Resins and Compounds
([email protected], [email protected], [email protected], [email protected] [email protected]
and [email protected]).
Altamira, Tampico, Mexico
Manufacture, Compounding and Extrusion of
Engineered Thermoplastic Resins and
Compounds ([email protected] and [email protected],
[email protected] and [email protected]).
Bergen op Zoom,
The Netherlands
Manufacture, Compounding and Extrusion of
Engineered Thermoplastic Resins and
Compounds including [email protected], [email protected],
[email protected],[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], Naryl [email protected],
[email protected] and [email protected] and Extrusion of
Thermoplastic Sheet and Film ([email protected] Sheet,
[email protected], [email protected], [email protected], and
[email protected]).
Page 3 of 6
ApprovalCertificate
No: UQA0113313
This document is subject to the provision on the reverse
1401 Enclave Parkway, Suite 200, Houston Texas77077 USA
This approval is carried out in accordance with the lRQA assessment and certification procedures and monitored by LRQA.
MKfOReomion
1)
@
CERTIFICATE SCHEDULE
SABIC Innovative
Plastics
Locations
Activities
Raamsdonksveer, The Netherlands
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected],
[email protected], [email protected], [email protected], [email protected], [email protected], [email protected]).
Grangemouth, Scotland
Manufacture, Compounding and Extrusion of
ESREngineered Thermoplastic Resins and
Compounds ([email protected], [email protected], [email protected],
[email protected] and [email protected]).
Jurong, Singapore
Compounding and Extrusionof Engineered
Thermoplastic Resins ([email protected], [email protected],
[email protected], [email protected]@ and [email protected]).
La Aljorra Murcia, Cartagena, Spain
Manufacture, Compounding and Extrusion of
Polycarbonate Engineered Thermoplastics
Resins and Compounds ([email protected], [email protected],
[email protected] [email protected]).
Rayong, Thailand
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], Noryl [email protected],
[email protected], [email protected], [email protected], [email protected]
[email protected]).
Seremban, Malaysia
Compounding and Extrusion of Engineered
Thermoplastics Resins ([email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected],[email protected], [email protected],
[email protected], [email protected] and [email protected]).
Page 4 of 6
[email protected]@
No: UQA 0113313
This document is subject to the provisionon the reverse
1401EnclaveParkway,Suite200, HoustonTexas77077USA
This approval is carried out in accordance with the lRQA assessment and certification procedures and monitored by LRQA.
Maaollnlsion1)
@
CERTIFICATE SCHEDULE
SABIC Innovative
Plastics
Locations
Activities
Thornaby, United Kingdom
Compounding and Extrusion of Engineered
Thermoplastic Resins([email protected]).
Bay St. Louis, Mississippi, USA
Manufacture, Compounding and Extrusion of
ESREngineered Thermoplastics Resins and
Compounds ([email protected], [email protected], [email protected]
and [email protected]).
Burkville, Alabama, USA
Manufacture, Compounding, and Extrusion
of PolycarbonateEngineeredThermoplastic
Resinsand Compounds ([email protected]).
Mt. Vernon, Indiana, USA
Manufacture, Compounding and Extrusion of
Engineered Thermoplastics Resins and
Compounds including [email protected], [email protected],
Lexan [email protected],[email protected], [email protected], [email protected],
[email protected]), [email protected], [email protected] , and Extrusion of
Thermoplastic Sheet and Film ([email protected] Sheet,
[email protected], [email protected] [email protected],
[email protected], [email protected], [email protected], and
[email protected]).
Ottawa, Illinois, USA
Manufacture, Compounding and Extrusionof
ESREngineeredThermoplastics Resinsand
Compounds ([email protected],[email protected],[email protected]).
Selkirk, New York, USA
Manufacture, Compounding, and Extrusion
of PolyphenyleneOxide Engineered
Thermoplastic Resinsand Compounds
([email protected],Noryl [email protected],Noryl [email protected],
[email protected],[email protected],[email protected],[email protected]
[email protected])and High Impact Polystyrene(HIPS).
Page 5 of 6
ApprovalCertificate
No: UQA 0113313
document is subject to the provision on the reverse
1401 Enclave Parkway, Suite 200, Houston Texas 77077 USA
This
This approval is carried out in accordance with the lRQA assessment and certification procedures and monitored by lRQA.
MKroflftision
13
@
CERTIFICATE SCHEDULE
SABIC Innovative
Plastics
Locations
Activities
Washington, West Virginia,USA
Manufacture, Compounding and Extrusion of
ESREngineered Thermoplastics Resins and
Compounds ([email protected], [email protected], [email protected],
[email protected]).
Campinas, Brazil
Compounding and Extrusion of Engineered
Thermoplastics Resins ([email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected], [email protected],[email protected], [email protected],
[email protected], [email protected] and [email protected]).
Extrusion of High Performance Thermoplastic
Sheets ([email protected], [email protected]).
Tortuguitas - Pcia. De Buenos AiresArgentina
Compounding and Extrusion of Engineered
Thermoplastic Resins ([email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected] and [email protected]).
Approval
Certificate No: UQA0113313
OriginalApproval: April 1, 2001
Current Certificate: August 31, 2007
Certificate Expiry: April30, 2010
Page 6 of 6
ApprovalCenificate
No:UQA0113313
Thisdocumentissubjectto theprovision
onthereverse
1401 Enclave Parkway, Suite 200, Houston Texas 77077 USA
This approval is carried out in accordance with the LRQAassessment and certification procedures and monitored by LRQA.
~RiIYisk>n'3