Plastic Industry-Temperature Sensor Catalog

Transcription

Serving you since 1948
Plastic Industry-Temperature Sensor Catalog
6260 Hawthornr Dr, Windsor, ON-N8t1J9. Canada. Ph : 1-888-4-ISOLAB, 1-519-948-8371
Fax : 5199483614 USA : 1-248-562-5720 Email : [email protected]. www.isolab.org
Corporate Profile:
Isolab Inc. has offered comprehensive calibration and repair
services since 1948. In 2001 in response to the growing demands for ISO certification Isolab was established.
Calibration Services:
Isolab Inc. specializes in the calibration of instruments to
ISO 9000 and QS 9000 standards. ISOLAB ISO/IEC 17025:
2005 accredited by Bureau Veritas. All calibrations are traceable to NIST. We provide calibration services and consultation
services for your calibration needs, as well as process control
and instrument repair & troubleshooting requests.
Manufacturing Capabilities:
Isolab Inc. is proud to announce it’s recent expansion into
thermocouple temperature sensor manufacturing. The name you
have trusted for quality and affordable calibration services is
now offering the same value and experience in thermocouples!
Recently certified to manufacture thermocouples under our ISO
banner, Isolab Inc. has invested in the most recent manufacturing equipment and materials to ensure that all of our sensors
meet the most rigid demands of today’s industry.
Calibration Services + Temperature Sensor Manufacturing + Troubleshooting/Design
WWW.ISOLAB.ORG
Ph:1-888-4-ISOLAB
Fax: 519-948-3614
Calibration Services:
Using both a fully mobile and an in-house calibration laboratory,
Isolab is capable of maintaining calibration standards and providing
your company with the necessary documentation. All Isolab
calibrations are traceable to the highest NIST standards in today’s
industry.
Isolab is capable of calibrating and maintaining the following types of
instruments:
CONTROLLERS / RECORDER
Flow (Differential Pressure)
Level
pH
Conductivity
Pressure
Temperature
Micrometers
Callipers
Indicators
Height Gauges
AC/DC Volts
AC/DC Amps
Multimeters
Decade Boxes
Hi Pot (Dielectric Strength) Tester Hygrometer
Humidity Chart Recorders
RTD & Thermocouples
Thermometers
Dry Block Calibrators
Heat Stress Monitors
Ovens
Temperature Recorders
Environmental Chambers
Manometers
Pressure Gauges / Indicators
Vacuum Gauges
Pressure Switches
Pressure Chart Recorders
Torque Wrenches
Weights
Electronic Balances (Scales)
WWW.ISOLAB.ORG
Ph:1-888-4-ISOLAB
Fax: 519-948-3614
Thermocouples & RTD’s
Mineral Insulated Thermocouples:
Thermocouples & sensors are best suited for all range of temperatures, from freezers to extreme environments or applications
requiring versatile and long lasting sensors. These fiberglass &
MgO insulated thermocouples capable of temperatures ranging
from –250 degress C to 1100 Deg C for continuous operation.
Isolab provides of the self and custom built thermocouple sensors
for any industrial application. Contact Isolab for more
information.
Resistance Temperature Detectors
RTD’s & Thermistors:
Resistance temperature sensors are designed to provide accuracy
and stability and are essential for precise and exacting control in
applications that operate at a maximum of 650 Deg C. RTDs, &
Thermistors are available in a variety of styles and constructions,
are specially designed to ensure precise and repeatable temperature
measurement for a wide variety of industrial applications. Contact
Isolab for more information.
WWW.ISOLAB.ORG
Ph:1-888-4-ISOLAB
Fax: 519-948-3614
Our Temperature Sensors & Services are valued across varied
industries, some of the most common industries we have provided solutions for include:
Health Sciences
Food Service
Process Industries
Plastics
Packaging
Environmental Monitoring
WWW.ISOLAB.ORG
Ph:1-888-4-ISOLAB
Fax: 519-948-3614
Whether your needs range from Calibration and Certification of you process
control equipment, to repair, maintenance, troubleshooting or replacement of
industrial certified temperature control sensors and related equipment, Isolab
can provide you with professional, experienced and efficient service to
support your business. We work closely with our valued customers to
provide unique solutions that are affordable and provide value and long term
solutions to your individual processes. Feel free to contact Isolab today to
learn more about how we can help you calibrate, monitor and maintain
consistency in your specific industry. Our dedicated owner and staff are
ready to work with you!
Contact us today!
WWW.ISOLAB.ORG
Ph:1-888-4-ISOLAB
Fax: 519-948-3614
Our Certifications:
WWW.ISOLAB.ORG
Ph:1-888-4-ISOLAB
Fax: 519-948-3614
Plastics Industry Thermocouples and RTDs
Table of Contents
Fixed Bayonet Thermocouples and RTDs
................................................................
................................................................................................................................
...................................... 3
Fixed Compression Thermocouples and RTDs
................................................................
................................................................................................................................
...................................... 4
Nozzle Style Thermocouples and RTDs
................................................................
................................................................................................................................
...................................... 5
Plastic Melt Thermocouples and RTDs
................................................................
................................................................................................................................
...................................... 6
Adjustable Bayonet Thermocouples and RTDs
................................................................
................................................................................................................................
...................................... 7
Probe Style Tube and Wire Thermocouples and RTDs
................................................................
................................................................................................................................
...................................... 8
Gasket Style Thermocouples and RTDs
................................................................
................................................................................................................................
...................................... 9
Ring Style Thermocouples and RTDs
................................................................
................................................................................................................................
.................................... 10
Under the Band Style Thermocouples and RTDs
................................................................
................................................................................................................................
.................................... 11
................................................................
................................................................................................................................
.................................... 13
Pipe Clamp Thermocouple/Adaptors
Adaptors
................................................................
................................................................................................................................
.................................... 14
1
2
Fixed Bayonet thermocouples and RTD’s are most commonly used in the Plastic Processing Industry.
They can be used in many general applications where a bayonet adaptor is preferred. As a standard,
they are provided with a 316SS sheath with SS square lock armoured leads.
FB00
FB90
FB45
ORDER CODES
FB
-
-
1
2
-
-
3
4
-
5
-
6
1. Thermocouple Style
00
Straight Fixed Bayonet Style
45
45° Fixed Bayonet Style
90
90° Fixed Bayonet Style
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
RTD2 100 Ohm, 2 Wire
JJ
KK
TT
RTD/RTD2
RTD/RTD3
RTD/RTD4
Dual Iron/Constantan
Dual Chromel/Alumel
Dual Copper/Constantan
Dual 100 Ohm, 2 Wire
3. Length of B
Specify in Inches
4. Length of A
Specify in Inches
5. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
Standard Female Jack
3
BX Connector & 4” Stripped Leads with Spade Lugs
4
4” Stripped Leads with Spade Lugs
5
6
7
8
4” stripped leads
Mini Male Plug
Mini Female Jack
Special, describe pl.
6. Options
U
Ungrounded (3/16” OD Standard)
W
Welded Construction
29
1/8” Diameter Probe
49
09
Fiberglass Wire with Stainless Steel Overbraid
99
Fiberglass Wire without Stainless Steel Overbraid
AA
Special Construction. Pl describe.
3
Fixed Compression Thermocouples and RTDs
Fixed Compression thermocouples and RTD’s are commonly used in the Plastics Processing Industry
much like the fixed bayonet styles are. The difference being is they are mounted using a 1/8” NPT
compression fitting. Other thread sizes are available upon rrequest.
FC90
FC00
FC45
ORDER CODES
FC00/45/9
-
-
1
2
-
-
3
4
-
5
-
6
FC00 Straight Fixed Bayonet Style
FC45 45° Fixed Bayonet Style
FC90 90° Fixed Bayonet Style
J
K
T
RTD2
RTD3
RTD4
Iron/Constantan
Chromel /Alumel
Copper/Constantan
100 Ohm, 2 Wire
100 Ohm, 3 Wire
100 Ohm, 4 Wire
JJ
KK
TT
RTD/RTD2
RTD/RTD3
RTD/RTD4
2. Calibration Type
Dual Chromel/Alumel
Dual
Copper/Constantan
4. Length of A
Specify in Inches
3. Length of B
Specify in Inches
5. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
3
BX Connector & 4” Stripped Leads
with Spade Lugs
4
5
6
7
8
4 “ stripped leads
Mini Male Plug
Mini Female Jack
Specials, pl describe
6. Options
U
W
Welded Construction
00
No Compression Fitting Required
29
49
09
99
AA
Special Construction. Describe
4
Nozzle Style Thermocouples and RTDs
Threaded nozzle thermocouples and RTD’s are commonly used to measure the temperature of the
nozzle on an injection moulding machine. The PL300 and PL310 style is a versatile design and may be
used in a wide variety of applications where space is a factor. As a standard, this style is offered either
with or without stainless steel armour and with a ¼”
¼”-28N.F.
28N.F. threaded swivelling bolt. Other thread styles,
imperial or metric, are available.
NZA
NZS
ORDER CODES
NZ
-
-
1
2
-
3
-
4
-
5
A
Armored Nozzle Style
S
Spring Relief Nozzle Style
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
RTD2
RTD3
RTD4
100 Ohm, 2 Wire
100 Ohm, 3 Wire
100 Ohm, 4 Wire
JJ
KK
TT
RTD/RTD2
RTD/RTD3
RTD/RTD4
Dual Chromel/Alumel
Dual
Copper/Constantan
3. Length of A
Specify in Inches
4. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
3
with Spade Lugs
4
5
6
7
8
Mini Male Plug
Mini Female Jack
5. Termination Type
U
Ungrounded
99
AA
Special Construction, Describe
B1
6 x 1.0 x 10mm bolt
B2
8 x 1.25x 16mm bolt
SS
Stainless Steel Bolt
5
Plastic Melt Thermocouples and RTDs
The melt bolt style thermocouples and RTD’s are designed to directly measure the melt temperature of
plastic as it moves down the extruder barrel. They are commonplace in the extrusion and plastic injection
moulding industries.
s. They are offered in a variety of bolt lengths, as well as many other lead wire and
termination options.
Special constructions available
Typical
dimensions :
ORDER CODES
PMF/PMA
-
-
1
2
-
3
-
4
-
5
-
6
PMF Fixed Melt Style
PMA Adjustable Melt Style
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
RTD2
RTD3
RTD4
100 Ohm, 2 Wire
100 Ohm, 3 Wire
100 Ohm, 4 Wire
JJ
KK
TT
RTD/RTD2
RTD/RTD3
RTD/RTD4
Dual Chromel/Alumel
Dual
Copper/Constantan
3. Length of B
Specify in Inches
4. Length of A
3
3” SS Melt Bolt
4
4” SS Melt Bolt
6
6” SS Melt Bolt
8
8” SS Melt Bolt
10
10” SS Melt Bolt
12
12” SS Melt Bolt
5. Termination Type
1
Standard Male Plug
2
6. Options
U
AA
6
Adjustable Bayonet Thermocouples and RTDs
The adjustable bayonet style thermocouples and RTD’s are designed for applications where quick
installation and disconnect is required with the use of a bayonet adaptor. They are offered with SS
armour, allowing the sensor to be fully adjustable along itits
s entire length, or with a 12” long spring. Metric
dual slot caps are available upon request.
ABA
ABS
ORDER CODES
ABA/ABS
-
1
-
2
-
-
3
4
-
5
ABA Adjustable Bayonet Style Armored
ABS Adjustable Bayonet Style Spring
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
JJ
KK
TT
RTD/RTD2
RTD/RTD3
RTD/RTD4
Dual Chromel/Alumel
3. Length of A
Specify in Inches
4. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
3
with Spade Lugs
4
5
6
7
8
Mini Male Plug
Mini Female Jack
5. Options
U
AA
Special Construction. Please describe.
29
39
99
Fiberglass Wire Without Stainless Steel Overbraid
7
Probe Style Tube and Wire Thermocouples and RTDs
The A520 style Thermocouple’s and RTD’s are a low cost tube and wire alternative to Magnesium Oxide
(MgO) styles. They are always available in the common calibrations for Thermocouples, as well as 2, 3,
or 4 wire for RTD’s.
PSTW
ORDER CODES
PS
-
-
1
2
-
-
3
4
-
5
-
6
TW
Probe Style Tube and Wire
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
RTD2
RTD3
RTD4
100 Ohm, 2 Wire
100 Ohm, 3 Wire
100 Ohm, 4 Wire
JJ
KK
TT
RTD/RTD2
RTD/RTD3
RTD/RTD4
Dual Chromel/Alumel
Dual
Copper/Constantan
3. Length of B
Specify in Inches
4. Length of A
Specify in Inches
5. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
3
BX Connector & 4” Stripped Leads with Spade Lugs
4
6. Options
U
W
Welded Construction
29
39
49
AA
8
Gasket Style Thermocouples and RTDs
The gasket style thermocouples and RTD’s are a more heavy duty version of the PL
PL-700
700 and PL-710 ring
style. The heavy duty brass washer is reinforced with a strain relief fork crimped to the lead wire. They
are ideal for surface temperature measurement as are the ring style sensors.
GS
ORDER CODES
GSA/GSS
-
1
-
2
-
-
3
4
-
5
GSA Straight Fixed Style with armor
GSS Straight Fixed Style with SS Overbraid
2. Calibration Type
J
K
T
RTD2
RTD3
RTD4
Iron/Constantan
Chromel /Alumel
Copper/Constantan
100 Ohm, 2 Wire
100 Ohm, 3 Wire
100 Ohm, 4 Wire
JJ
KK
TT
RTD/RTD2
RTD/RTD3
RTD/RTD4
Dual Chromel/Alumel
3. Length of A
Specify in Inches
4. Termination Type
0
1
2
3
Leads Not Stripped
Standard Male Plug
with Spade Lugs.
4
5
6
7
8
Mini Male Plug
Mini Female Jack
5. Options
U
9D
99
AA
Forks Exiting 90° from Gasket
9
Ring Style Thermocouples and RTDs
The ring style thermocouples and RTD’s are designed for any surface measurement application. They
are attached to a surface simply with a screw or bolt. They are available with SS Armoured leads or
SSOB leads. Many washer styless and lead types are available upon request.
RSA
RSS
ORDER CODES
RSA/RSS
-
1
-
-
2
-
3
4
-
5
RSA Armoured Ring style
RSS SSOB Ring style
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
RTD2
100 Ohm, 2 Wire
RTD3
100 Ohm, 3 Wire
RTD4
100 Ohm, 4 Wire
JJ
KK
Dual Chromel/Alumel
TT
RTD/RTD2 Dual 100 Ohm, 2 Wire
3. Length of A
Specify in Inches
4. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
3
BX Connector & 4” Stripped Leads with
Spade Lugs
4
5
6
7
8
Mini Male Plug
Mini Female Jack
5. Options
U
M
Forks Exiting 90° from Gasket
6
#6 Copper Washer
99
AA
10
Under the Band Style Thermocouples and RTDs
Under the brand style thermocouples and RTD’s are a variety of surface measurement sensors. They are
commonly used in pipes and held in place with the use of a pipe clamp, or on barrels and nozzles under a
band heater. These are offered with a brass shim as a standard, but are available with SS upon request.
.
UB-800
UB-810
ORDER CODES
UBA/UBS
-
1
-
2
UBA Under the Band Style with SS Armour
UBS Under the Band Style with SS Braid
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
RTD2
100 Ohm, 2 Wire
RTD3
100 Ohm, 3 Wire
RTD4
100 Ohm, 4 Wire
JJ
KK
Dual Chromel/Alumel
TT
-
3
-
3. Length of C
Specify in Inches
4
-
5
-
6
-
7
5. Length of A
Specify in Inches
4. B Length
Specify in Inches
4. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
3
Spade Lugs
4
5
6
7
8
Mini Male Plug
Mini Female Jack
7. Options
U
Ungrounded
SS
Stainless Steel Shim
99
Fiber glass Wire without Stainless Steel Over braid
AA
12
Thermocouple
rmocouple and RTD Extension Cables
Thermocouple and RTD extension cables are available with a variety of lead wires and protection such as
SS armour and over braid, as well as many termination options and lengths. They are used to provide
connections between sensors, jack panels or various instrumentation.
EXTA-type
ORDER CODES
EXTA/EXTS
-
1
-
2
-
3
-
4
-
5
-
6
EXTA Armored Extension Cable
EXTS Stainless Steel Over Braid Extension Cable
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
3. Length of A
Specify in Inches
4. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
1M
Miniature Male Plug
2
2M
Miniature Female Jack
3
with Spade Lugs
4
5. Y Termination Type
0
Leads Not Stripped
1
Standard Male Plug
1M
Miniature Male Plug
2
2M
Miniature Female Jack
3
with Spade Lugs
4
6. Options
09
99
Fiberglass Wire without Stainless Steel
Overbraid (no Armor)
AA
13
Pipe Clamp Thermocouple/Adaptors
Adaptors
Pipe clamps are used in conjunction with the PL
PL-100, PL-145, PL-190, PL-500 and PL-510
510 series
bayonet style thermocouples. They are designed got temperature measurement on the outside of a pipe.
Pipe clamps are an economical and efficient design that re
resembles
sembles no machining or tapping to mount
them. Custom diameters and bayonet adaptors are also available.
Part
Number
PC-20
PC-21
PC-22
ORDER CODE
Fits Outside
Part
Diameter
Number
1/2” TO 7/8”
PC-24
7/8” TO 1 1/4” PC-25
1 1/4” TO 2”
PC-26
Fits Outside
Diameter
2 1/4” TO 3 1/4”
3 1/4” TO 4 1/4”
4 1/4” TO 5”
Thermocouple with pipe clamp
ORDER CODES
TPC
-
-
1
2
-
3
-
4
2. Min Diameter A in
Inches.
Specify in Inches
2. Calibration Type
J
Iron/Constantan
K
Chromel /Alumel
T
Copper/Constantan
AA
AA-Special
Special requirement.
pl ease describe.
3. Length of B
Specify in Inches
4. Termination Type
0
Leads Not Stripped
1
Standard Male Plug
2
3
Spade Lugs
4
-
5
6
7
8
Mini Male Plug
Mini Female Jack
14
Accessories for Thermocouple /RTD Se
Sensors
Standard Connector :Temperature
Temperature rating 425º F Max
s
STANDARD CONNECTOR
MALE 2 PIN
PART #
STD2PM-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
STD2PF-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
FEMALE 3 PIN
MALE 3 PIN
PART #
STD3PM-
FEMALE 2 PIN
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
STD3PF-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
HIGH TEMPERATURE CONNECTORS Continuous -800
800 F ,Intermittent 1000 F.
FEMALE 2 PIN
MALE 2 PIN
PART #
STDHT2PMMALE 3 PIN
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
STDHTF2PF-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
FEMALE 3 PIN
SUPERHIGH
TEMP(CERAMIC)
CONNECTORS(
CONNECTORS(-29
650 Deg C)
PART # 29 C toCALIBRATIONS
CALIBRATIONS
PART
#
STDHT3PFJ,K,R,S,T,E,N,RTD
STDHT3PMJ,K,R,S,T,E,N,RTD
15
FEMALE 2 PIN
PART #
STDSHT2PM-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
MALE 2 PIN
MINI CONNECTORS
PART #
STDSHT2PM-
Mini 2 Pin Female
Mini 2 Pin male
PART #
MINI2PM-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Mini 3 Pin Male
PART #
MINI3PM-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
MINI2PF-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Mini 3 Pin Female
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
MINI3PF-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
High Temp Mini Connectors : (350 Deg c).
16
Mini 2 Pin Male
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
MINIHT2PM-
Mini 2 Pin Female
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
MINIHT2PF-
Super high Temp (Ceramic) Mini connectors ((-29
29 C to 650 Deg C).
Mini 2 Pin Male
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PART #
MINISHT2PMMini 2 Pin Female
PART #
MINISHT2PF-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
PANEL Ther mocouple Jacks
Standards Jacks
Standard Panel jack : 2 PIN
PART #
STD2PANJ-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Standard Panel jack 3 PIN
PART #
STD3PANJ
STD3PANJ-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Std Panel jack with bracket 2 PIN
PART #
STD2PANWBJ-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
17
Std Panel jack Round 2 PIN
PART #
STD2PANRJ-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Miniature Panel Jack :
Miniature Panel jack : 2 PIN
PART #
MIN2PANJ-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Miniature Panel jack : 3 PIN
PART #
MIN3PANJ-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Miniature Panel jack Round : 2 PIN
PART #
MIN2PANRJ-
CALIBRATIONS
J,K,R,S,T,E,N,RTD
Jack Panel Standard Connector Conduit Boxes.
Moulded of Glasss reinforced Nylon ::Model H500 which is Suitable for :
(a) 5 Nos. of Jack with Bracket (STD2PANWBJ
(STD2PANWBJ-) and Std 3 Pin Jacks (STD3PANJ-)
(b) 6 Nos. of Std jack (STD2PANJ-)) and Mini jacks(MIN2PANJ- and MIN3PANJ- )
Aluminum Standard Electrical FS Box: Model H501 which is suitable for:
(STD2PANWBJ-) and Std 3 Pin Jacks (STD3PANJ-)
(b) 5/66 Nos. of Std jack (STD2PANJ
(STD2PANJ-) and Mini jacks(MIN2PANJ- and MIN3PANJ- )
Heavy duty Cast aluminum Box : Model H502 Which is suitable for :
(STD2PANWBJ-) or Std 3 Pin Jacks (STD3PANJ-)
(b) 6 nos. Std 2 Pin Jacks (STD2PANJ
PANJ-) or 2 PIN or 3 PIN Mini jacks (MIN2PANJ- and MIN3PANJ-)
MIN3PANJ
18
STANDARD PANELS FOR OUTLET BOXES
PART#
# OF JACKS
SIZE
H510
0
2 3/4" x 4 1/2"
H515
5
2 3/4" x 4 1/2"
H516
6
2 3/4" x 4 1/2"
H550
5
3 1/4" x 5 3/4"
H551
6
3 1/4" x 5 3/4"
H551-3 (3 PIN)
6
2 5/8" x 5 3/4"
H552
8
3 1/4" x 7 1/4"
H552-3 (3 PIN)
8
3 1/4" x 7 1/4"
H553
10
3 1/4" x 8 3/4"
H553-3 (3 PIN)
10
3 1/4" x 8 3/4"
H554
12
3 1/4" x 10 1/4"
H554-3 (3PIN)
12
3 1/4" x 10 1/4"
H555
20
3 1/2" x 19"
H555-3 (3 PIN)
20
3 1/2" x 19"
H555-16
16
3 1/2" x 19"
H555-18
18
3 1/2" x 19"
H556 (2 Rows of 20)
40
5 1/4" x 19"
H555-S
20
5 1/2" x 19"
20
5 1/2" x 19"
(with Switch cut out)
H555-S-M
19
BAYONET ADAPTORS
No
PART #
MATERIAL
LENGTH
THREADS
Steel, Nickel PI.
Steel, Zinc PI.
7/8"
7/8"
1/8 NPT
3/8 x 24
Steel, Nickel PI.
Steel, Blk. Ox
7/8"
7/8"
3/8 x 24
1"
1/8 x 28 British
3/8 x 16
1/8 NPT
1/8 NPT
1
H440-7-1-NI
2
H440-7-3
3
H440-7-3-NI
4
H440-7-BPT
5
H441-0-3-16
6
H441-2-1-NI
Steel, Zinc PI.
Steel, Nickel PI.
7
H441-3-1-NI
Steel, Nickel PI.
1 1/4"
1 3/8"
8
H441-3-3
9
H441-3-3-16
Steel, Zinc PI.
Steel, Zinc PI.
1 3/8"
1 3/8"
3/8 x 24
3/8 x 16
10
H441-4-1-NI
11
H441-6-1
Steel, Nickel PI.
Steel, Zinc PI.
1 1/2"
1 3/4"
1/8 NPT
1/8 NPT
12
H442-0-1-NI
2"
13
H442-2-1-NI
Steel, Nickel PI.
Steel, Nickel PI.
14
H442-4-1-NI
Steel, Nickel PI.
2 1/4"
2 1/2"
1/8 NPT
1/8 NPT
15
H443-0-1-NI
16
H443-0-3
Steel, Nickel PI.
Steel, Zinc PI.
3"
3"
1/8 NPT
3/8 x 24
17
H443-4-1-NI
18
H443-4-3-NI
Steel, Nickel PI.
Steel, Nickel PI.
3 1/2"
3 1/2"
1/8 NPT
3/8 x 24
19
H444-0-1-NI
Steel, Nickel PI.
4"
20
H444-4-1
21
H445-0-1
Steel, Zinc PI.
Steel, Zinc PI.
4 1/2"
5"
1/8 NPT
1/8 NPT
22
H445-4-1
Steel, Zinc PI.
5 1/2"
1/8 NPT
1/8 NPT
1/8 NPT
20
STOCK METRIC ADAPTORS
PART #
SIZE & THREAD
LENGTH
EA121
M12 x 1
25 mm
EA1215
M12 x 1.5
25 mm
EA1275
M12 x 1.75
25 mm
EA141
M14 x 1
30 mm
EA1415
M14 x 1.5
38 mm
EA142
M14 x 2
30 MM
EA1615
M16 x 1.5
30 MM
Note :For additional models please contact us.
21
COMPRESSION FITTINGS
Lava and Neoprene Ferrules Available Inquire.
Re-Adjustable
Adjustable Fittings use a Teflon ®
ferrule
"Drilled-Thru"
Thru" for Thermocouples
PART#
NCB 12
NCB 14
NCB 18
NCB 22
NCB 24
NCB 28
NCB 32
NCB 32-4.5mm
NCB 34
NCB 38
NCB 38-4.5mm
NCB 42
NCB 44
NCB 48
NCB 88
NCS 11
NCS 12
NCS 12T
NCS 21
NCS 22
NCS 22T
NCS 22-3mm
NCS 24
NCS 24T
NCS 32
NCS 32T
NCS 34
NCS 34T
NCS 42
NCS 42T
NCS 42-6mm
NCS 44
NCS 44T
NCS 48
NCS 48T
NCS 64
NCS 64T
NCS 68
NCS 68T
BORE
1/16"
1/16"
1/16"
1/8"
1/8"
1/8"
3/16"
4.5mm
3/16"
3/16"
4.5mm
1/4"
1/4"
1/4"
1/2"
1/16"
1/16"
1/16"
1/8"
1/8"
1/8"
3mm
1/8"
1/8"
3/16"
3/16"
3/16"
3/16"
1/4"
1/4"
6mm
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
MATERIAL
Brass Compression Fitting
S/S Compression Fitting
S/S Re-Adjustable Fitting
NPT
1/8
1/4
1/2
1/8
1/4
1/2
1/8
1/8
1/4
1/2
1/2
1/8
1/4
1/2
1/2
1/16
1/8
1/8
1/16
1/8
1/8
1/8
1/4
1/4
1/8
1/8
1/4
1/4
1/8
1/8
1/8
1/4
1/4
1/2
1/2
1/4
1/4
1/2
1/2
22
Thermocouple wire.
ORDER CODE
-
1
-
2
-
3
-
4
5
-
6
2. B & S Gauge (Two digit)
XX
12-36 Gauge)
5.Metallic Over braid
1. Thermocouple type-ANSI Calibration
K
Type K
R
Type R
Type J
J
S
Type S
T
N
Type T
Type N
R2 2 wire RTD
R4 4 Wire RTD
B
E
S
N
9
Type B
Type E
R3 3 wire RTD
4. Insulations
BRAIDED
Code Primary
301
Vitreous Silica
304
Glass
305
Double Glass
Secondary
Vitreous Silica
Glass
Double Glass
Wrap
Glass
Glass
Ceramic Fiber
Ceramic Fiber
Vitreous Silica
Wrap
Twisted
Glass
Ceramic Fiber
Ceramic Fiber
Vitreous Silica
314
321
350
355
365
3. Thermocouple type-ANSI Calibration
1
TC Solid wire, Standard tolerance
TC Solid wire, Special tolerance
2
5
3
7
4
TC Stranded wire, Standard
tolernce.
TC Stranded wire, Standard
tolerance
6
8
SS Over braid
INC 600
No over braid
6. Color code
Blank
ANSI/ASTM E230
BSC
BS1830
DIN
DIN 43710
JIS
JIS C1610-1981
IEC
IEC 584-3
Tape and Extruded
code
Single
502
PVC
505
PVC
506
FEP
Jacket
PVC
Ripcord
FEP
507
508
509
510
511
512
516
FP
TFE Tape
FEP
PVC
Twisted
Polyimide Tape
PFA
FEP
TFE Tape
FEP + Shiled
PVC+Shield
Polyimide Tape
Polyimide Tape
PFA
Ext. Grade Solid tolerance
Ext. Grade Special tolerance
Ext. Grade Stranded Standard
tolerance
Ext. Grade Stranded Special
tolerance
23
THERMOCOUPLE COLOR CODES
24
NOTE : CRN (TSSA) APPROVAL UNDER PROGRESS.
PROGRESS
25

Plastic Industry-Temperature Sensor Catalog

Transcription

Similar documents