LINC Catalog - Linc Systems

Transcription

LINC Systems-Who We Are
Established in 1995 and headquartered in Westfield, IN we
have been incorporated as LINC Systems for over 15 years.
Prior to LINC Systems, we were Duo-Fast Great Lakes since
1978 with over 32 years of fastening expertise.
With over 100,000 square feet of inventory serving 22 states
we have three distribution centers to serve you in IN, NC and
RI. The average tenure for our 92 employees is 18 years in the
fastening industry.
We are the largest Stanley Bostitch distributor in the US. We
are the largest Stanley Bostitch distributor in the US. According
to Stanley Bostitch Vice President of Sales Chris Dutra, “LINC
Systems is simply one of the strongest and most ethical
companies we do business with.ˮ
Maine
Vermont
Wisconsin
Michigan
Illinois Indiana
New York
Pennsylvania New Jersey
Delaware
Ohio
Maryland
W. Virginia
Virginia
Kentucky
Tennessee
New Hampshire
Massachusetts
Rhode Island
Connecticut
N. Carolina
S. Carolina
TABLE OF CONTENTS
Private Label Advantage.........................................................................2-5
General Information................................................................................6-9
Private Label | Penny | Terminology | Coatings & Finishes
Screws | Tempered Finish
Pro Drive General Construction Fasteners.....................................11-14
Common | Sinker | Box | Ring Pole Barn | Fluted Masonry
Hard Cut Masonry | Ring Underlayment | Duplex | Finish
Outdoor Construction Fasteners-Hot Dipped Galvanized..........15-18
Common | Box | Joist Hanger | Spiral Deck | Spikes
Ring Pole Barn | Finish | Casing | Gutter Spike
Fence Staple | Poultry Staple | Hard Cut Masonry
Roofing and Siding Fasteners............................................................19-20
EG Roofing | HDG Roofing | Plastic Cap | Siding
Neoprene | Vinyl Siding
Drywall Fasteners................................................................................21-22
Ring Drywall Nail | Coated Cupped Nail
Fine Screw | Coarse Screw | Self Drill
Specialty Fasteners...............................................................................23-27
Yellow Zinc-Not ACQ
304 Stainless Steel Deck Screw
Ceramic Screws Star Head
Ceramic Screws Combo Head
304 Stainless Trim Screws
Maze Galvanized Decking
Maze Split-less Wood
Structural
Finish & Trim
Post Frame
Trim Nail-ALM & SS
Composite
Air Drive-Collated Fasteners.............................................................28-37
Bostitch | Hitachi | Paslode | Senco
Advertisers
Bostitch...................................................................................................38-40
Duo-Fast......................................................................................................41
Grabber...................................................................................................42-43
Hitachi....................................................................................................44-45
Iron-Clad.....................................................................................................46
Iron-Dog......................................................................................................47
PAM.........................................................................................................48-49
Rolair............................................................................................................ 50
Quik Drive...................................................................................................51
SpotNails..................................................................................................... 52
www.lincsystems.com | Your Complete Fastener Headquarters
1
PRIVATE
PRIVATE
LABEL
LABEL
ADVANTAGE
ADVANTAGE
» Pro Drive products are packaged in
clear plastic tubs, not weak cardboard
boxes
» Complete buy/back program offered
» Merchandising and Marketing for your
entire packaged nail section
» Inventory control-Let LINC Systems
manage your inventory
2
800.513.9918 | 317.399.3100 | www.lincsystems.com
PRIVATE LABEL ADVANTAGE
• Custom private label program
• Free advertising on the job site
• Adds value to your business
• Pro Drive is not found in the Big Box
Pro Drive Branded
Fasteners are NEVER sold
at any Big Box retailers!
3
4
• Custom private label program
• Free advertising on the job site
• Adds value to your business
• Air Drive is not found in the Big Box
Air Drive Branded
Fasteners are NEVER sold
at any Big Box retailers!
5
NAILS & SCREWS:
PENNY SIZE, TERMINOLOGY, COATINGS & FINISHES
PENNY SIZE
Nails are usually sold by weight (either in bulk or in
boxes). In the US, the length of a nail is designated by its
penny size. It is commonly believed that the origin of the
term “penny” in relation to nail size is based on the old
custom in England of selling nails by the hundred.
A hundred nails that sold for six pence were “six penny”
nails. The larger the nail, the more a hundred nails
would cost. Thus the larger nails have a larger number
for its penny size. This classification system was still
used in England in the 18th century, but is obsolete there
today.
The penny size is written with a number and the
abbreviation d for penny (e.g. -10d). D is an abbreviation
for denarius, a Roman coin similar to a penny; this was
the abbreviation for a penny in the UK prior to the 18th
Century. A smaller number indicates a shorter nail and
a larger number indicates a longer nail. Nails under 1¼
in., often called brads, are sold mostly in small packages
with only a length designation (e.g. 1/2" (12 mm),
11⁄8" (28 mm), etc.). Penny size is not always directly
correlated to length because nails with larger shanks and
shorter lengths will be the same weight as the standard
penny designation. For example boxes of nails that are
packaged for pneumatics nails are called 8 penny nails
but have a length of 2-3/8". Also some 16d nails are
called 16d short and measure 3-1/4".
6
PENNY
LENGTH
2d
1
3d
1-1/4
4d
1-1/2
6d
2
7d
2-1/4
8d
2-1/2
9d
2-3/4
10d
3
12d
3-1/4
16d
3-1/2
20d
4
30d
4-1/2
40d
5
50d
5-1/2
60d
6
NAILS & SCREWS:
TERMINOLOGY
Box Nail - a wire nail with a head; box nails have a smaller shank than common nails of the same
size
Bright Finish - no surface coating; not recommended for weather exposure or acidic or treated
lumber
Casing Nail - a wire nail with a slightly larger head than finish nails; often used for flooring
CC or Coated - a cement coated, nail coated with adhesive (cement) or vinyl for greater holding
power (greater withdrawal)
Common Nail - a construction wire nail with a disk-shaped head that is typically 3-4 times the
diameter of the shank: common nails have larger shanks than box nails of the same size
Duplex Nail - a common nail with a second head, allowing for easy extraction
Finish Nail - a wire nail that does not have a head; can be easily concealed
Galvanized - treated for resistance to corrosion and/or weather exposure
Electro Galvanized - provides a smooth finish with corrosion resistance.
Hot Dipped Galvanized (HDG) - offers greater corrosion resistance as a thicker layer of
zinc is applied to the nail. All galvanized coatings melt some from friction when driven to
help lubricate and then hardens when cool; color varies by manufacturer (tan, silver or pink
coloring is common)
Head - round flat metal piece affixed to the top of the nail; for increased holding power
Helix - the nail has a square shank that has been twisted this makes the nail very difficult to pull
out; often used in decking
Length - distance from the head to the point of a nail
Phosphate Coated - a dark grey to black finish providing a surface that binds well with paint and
joint compound with minimal corrosion resistance
Point - sharpened end opposite the head for greater ease in driving
Ring Shank - small rings on the shank to prevent the nail from being worked back out, often used
in flooring
Shank - the body length of the nail between the head and the point; may be smooth or may have
rings or spirals for greater holding power
Sinker - same thin diameter as a box nail, coated (see above), the funnel shaped head is easier to
nail flat and the head has a grid on the strike surface to keep the hammer strike from slipping;
these are the most common nails used in framing today
Spike - a large nail (usually over 4" - 100 mm)
7
NAILS & SCREWS:
COATINGS & FINISHES
Most nails are uncoated. The finish is called bright, though it’s more often a dull gray.
Galvanized nails are available for exterior uses. They are sometimes used because the coating is
rough, making them harder to pull out. Galvanizing a nail also increases its diameter slightly,
meaning more compression of the wood and thus more resistance to pull-out. A galvanized nail is
more corrosion resistant than an uncoated one, but not as resistant as a stainless steel nail.
Cement coated nails, or sinkers, have an adhesive on the shank. Driving them creates friction,
and therefore heat, which melts the adhesive. Once the nail is in place the adhesive sets up again,
creating a bond between the nail and the wood. You’ll find other coatings, but these are the ones
that you’ll use most often.
8
SCREWS:
SCREWS
A screw is a type of fastener characterized by a helical ridge, known as an external thread or just
thread, wrapped around a cylinder. Screw threads are designed to cut grooves in softer material
as it inserts. Oftentimes screws have a head, which is a specially formed section on one end of the
screw that allows it to be turned, or driven. The head is usually larger than the body of the screw,
which keeps the screw from being driven deeper than the length of the screw. Some exceptions
include trim screws. Trim screws have a smaller head and are designed to sink below surfaces
so the marking can be covered with a filler or paint. The cylindrical portion of the screw from
the underside of the head to the tip is known as the shank; it may be fully threaded or partially
threaded. The majority of screws are tightened by clockwise rotation. Screws with left-hand
threads are used in exceptional cases. Sharp points cut into the material directly. Drill points cut
into the material while displacing some of the wood pitch.
Phillips
(Crosshead)
Robertson
(Square)
Slotted
(Flat or
Straight)
Hex Socket
(Allen)
Hex Socket
(Allen)
Torx T, Star
TS, TX
Pozidrive
(SupaDriv)
Combo
Drive
(Square or
Phillips)
Course Thread
Fine Thread
Drill Point
Sharp Point
Designed for superior holding power when
fastening materials to light gauge steel.
Designed for superior holding power when
fastening wood to wood or other material
to wood.
9
Your Complete Packaged Nail Headquarters
GENERAL CONSTRUCTION
OUTDOOR CONSTRUCTION
ROOFING & SIDING
DRYWALL
SPECIALTY FASTENERS
10
GENERAL CONSTRUCTION
BRIGHT COMMON
Approx. Box
Count Per
Head
Pound
Diameter
Size
COMMON NAIL
General Construction
for carpentry & framing.
Thicker shank to
reduce bend.
Gauge
1 Lbs
5 Lbs
30 Lbs
50 Lbs
6D
2"
170
17/64"
11 -1/2
PD6DBC1
PD6DBC5
PD6DBC50
8D
2-1/2"
103
10/32"
10 -1/4
PD8DBC1
PD8DBC5
10D
3"
67
6/16"
9
PD10DBC1
PD10DBC5
PD10DBC50
12D
3-1/4"
62
6/16"
9
PD12DBC1
PD12DBC5
PD12DBC50
16D
3-1/2"
47
11/33"
8
PD16DBC1
PD16DBC5
20D
4"
32
13/32"
6
PD20DBC1
PD20DBC5
Gauge
1 Lbs
5 Lbs
PD8DBC30
PD16DBC30
PD8DBC50
PD16DBC50
PD20DBC50
COATED SINKER
Approx Box
Count Per
Head
Pound
Diameter
Size
COATED SINKER
for carpentry & framing.
Head designed to sink
flush with surface.
30 Lbs
50 Lbs
4D
1-1/2"
524
13/64"
14
PD4DCS1
PD4DCS5
6D
2"
290
15/64"
13
PD6DCS1
PD6DCS5
PD6DCS50
7D
2-1/4"
221
1/4"
12-1/2
PD7DCS1 PD7DCS5
PD7DCS50
8D
2-1/2"
150
17/64"
11-1/2
PD8DCS1
PD8DCS5
PD8DCS30
PD8DCS50
10D
3"
109
9/32"
11
PD10DCS1
PD10DCS5
PD10DCS30
PD10DCS50
12D
3-1/4"
80
5/16"
10
PD12DCS1
PD12DCS5
PD12DCS30
PD12DCS50
16D
3-1/2"
42
11/32"
9
PD16DCS1
PD16DCS5
PD16DCS30
PD16DCS50
20D
4"
34
13/32"
7
PD20DCS1
PD20DCS5
PD20DCS50
BOX NAIL
BOX NAIL
for framing, carpentry,
and box making.
Thin shank to reduce
wood splitting.
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
4D
1-1/2"
472
7/32"
14
PD4DBB1
PD4DBB5
6D
2"
232
17/64"
12-1/2
PD6DBB1
PD6DBB5
8D
2-1/2"
140
19/64"
11-1/2
PD8DBB1
PD8DBB5
10D
3"
92
5/16"
10-1/2
PD10DBB1
PD10DBB5
16D
3-1/2"
70
11/32"
10
PD16DBB1
PD16DBB5
50 Lbs
PD8DBB50
PD16DBB50
11
RING POLE BARN
POLE BARN
For load bearing
wooden structures
where greater holding
power is required.
Ring shank for an even
stronger hold.
POLE BARN
For load bearing
wooden structures
where greater holding
power is required.
Ring shank for an even
stronger hold.
SIZE
Approx Box
Count Per Pound
Head Diameter
Gauge
5 Lbs
50 Lbs
3-1/2"
57
5/16"
9
PD16DBRPB5
PD16DBRPB50
4"
35
3/8"
7
PD20DBRPB5
PD20DBRPB50
5"
28
3/8"
7
PD40DBRPB5
PD40DBRPB50
6"
17
15/34"
5
PD60DBRPB5
PD60DBRPB50
8"
13
15/34"
5
PD80DBRPB5
PD80DBRPB50
RING POLE BARN-TEMPERED HARDENED STEEL
SIZE
Approx Box
Count Per Pound
Head Diameter
Gauge
5 Lbs
50 Lbs
3-1/2"
57
5/16"
9
PD16DHTBRPB5
PD16DHTBRPB50
4"
35
3/8"
7
PD20DHTBRPB5
PD20DHTBRPB50
5"
28
3/8"
7
PD40DHTBRPB5
PD40DHTBRPB50
6"
17
15/34"
5
PD60DHTBRPB5
PD60DHTBRPB50
FLUTED MASONRY
FLUTED MASONRY
For fastening furring
strips and other
materials to masonry or
concrete. Fluted shank
for stronger hold.
12
SIZE
Approx Box
Count Per Pound
Head Diameter
Gauge
1 Lbs
5 Lbs
1"
188
5/16"
9
PD1FM1
PD1FM5
1-1/2"
130
5/16"
9
PD112FM1
PD112FM5
PD112FM50
2"
98
5/16"
9
PD2FM1
PD2FM5
PD2FM50
2-1/2"
79
5/16"
9
PD212FM1
PD212FM5
PD212FM50
3"
77
5/16"
9
PD3FM1
PD3FM5
50 Lbs
HARD CUT MASONRY
HARD CUT
MASONRY
Approx Box
Count Per Pound Head Diameter Gauge
SIZE
For fastening wood to
cinder block, brick,
or fresh concrete.
Cut shank to reduce
wood splitting.
1 Lbs
5 Lbs
50 Lbs
4D
1-1/2"
122
N/A
N/A
PD4DHCM1
PD4DHCM5
6D
2"
84
N/A
N/A
PD6DHCM1
PD6DHCM5
8D
2-1/2"
64
N/A
N/A
PD8DHCM1
PD8DHCM5
PD8DHCM50
10D
3"
47
N/A
N/A
PD10DHCM1
PD10DHCM5
PD10DHCM50
16D
3-1/2"
32
N/A
N/A
PD16DHCM1
PD16DHCM5
RING UNDERLAYMENT
RING
UNDERLAYMENT
For fastening
underlayment or
plywood to floor joists.
Ring shank for
stronger hold.
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
50 Lbs
1-1/4"
3D
345
1/4"
12-1/2"
PD114RU1
PD114RU5
PD114RU50
1-1/2"
4D
294
1/4"
12-1/2"
PD112RU1
PD112RU5
PD112RU50
2"
6D
205
1/4"
12-1/2"
PD2RU1
PD2RU5
PD2RU50
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
30 Lbs
50 Lbs
PD8DDX50
DUPLEX NAIL
DUPLEX
Double head plain
shank fastener designed
for easy removal where
required.
SIZE
8D
2-1/4"
92
15/62"-9/33
10
PD8DDX1
PD8DDX5
PD8DDX30
16D
3"
48
9/33"-11/32
8
PD16DDX1
PD16DDX5
PD16DDX30 PD16DDX50
13
FINISH NAIL
FINISH NAIL
For finish & trim work.
Head designed to
countersink the material
for easy fill and smooth
finish.
FINISH NAIL
TEMPERED
HARDENED
For attaching hardwood
mouldings. Brad style
head for ease of
concealment.
14
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
50 Lbs
3D
1-1/4"
890
0.099"
15-1/2
PD3DBF1
PD3DBF5
PD3DBF50
4D
1-1/2"
635
0.1055"
15
PD4DBF1
PD4DBF5
PD4DBF50
6D
2"
290
0.135"
13
PD6DBF1
PD6DBF5
PD6DBF50
8D
2-1/2"
197
0.142"
12-1/2
PD8DBF1
PD8DBF5
PD8DBF50
10D
3"
127
0.155"
11-1/2
PD10DBF1
PD10DBF5
PD10DBF50
16D
3-1/2"
90
0.162"
11
PD16DBF1
PD16DBF5
PD16DBF50
FINISH NAIL-Tempered Hardened
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
50 Lbs
PD4DHTBF5
4D
1-1/2"
690
7/64"
15
PD4DHTBF1
PD4DHTBF5
6D
2"
430
7/64"
15
PD6DHTBF1
PD6DHTBF5 PD6DHTBF50
8D
2-1/2"
350
7/64"
13-1/2"
PD8DHTBF1
PD8DHTBF5 PD8DHTBF50
OUTDOOR CONSTRUCTION
GALVANIZED COMMON
Framing and general
construction. Hot-dipped
galvanized coating
provides greater protection
against the elements.
HDG COMMON-Hot Dipped Galvanized
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
50 Lbs
8D
2-1/2"
103
9/32"
10-1/4
PD8DHDGC1 PD8DHDGC5
PD8DHDGC50
10D
3"
67
6/16"
9
PD10DHDGC1 PD10DHDGC5
16D
3-1/2"
47
11/33"
8
PD16DHDGC1 PD16DHDGC5 PD16DHDGC50
HDG BOX NAIL-Hot Dipped Galvanized
GALVANIZED BOX
Framing & general
construction. Smaller
shank to reduce wood
splitting. Hot-dipped
galvanized coating
provides greater protection
against the elements.
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
50 Lbs
4D
1-1/2"
475
7/32"
14
PD4DHDGB1
PD4DHDGB5 PD4DHDGB50
6D
2"
239
17/64"
12-1/2
PD6DHDGB1
7D
2-1/4"
210
17/64"
12-1/2
PD7DHDGB1
8D
2-1/2"
148
19/64"
11-1/2
PD8DHDGB1
10D
3"
95
5/16"
10-1/2
PD10DHDGB1 PD10DHDGB5 PD10DDGB50
16D
3-1/2"
73
11/32"
10
PD16DHDGB1 PD16DHDGB5 PD16DDGB50
HDG JOIST HANGER NAIL-Hot Dipped Galvanized
GALVANIZED
JOIST NAIL
For attaching joist
hangers to wood studs.
Galvanized to reduce
weather corrosion.
SIZE
Approx Box
Count Per
Pound
Gauge
1 Lbs
5 Lbs
1-1/4"
240
11
PD114HDGJH1
PD114HDGJH5
PD114HDGJH30 PD114HDGJH50
1-1/2"
122
11
PD112HDGJH1
PD112HDGJH5
PD112HDGJH30 PD112HDGJH50
30 Lbs
50 Lbs
15
GALVANIZED DECK
Spiral shank for stronger
hold which reduces nail
popping. Used for deck
construction. Galvanized
to reduce weather
corrosion.
GALVANIZED SPIKES
SINGLE
Used for landscape
timbers, log home
construction, and railroad
ties. Galvanized to reduce
weather corrosion.
HDG SPIRAL DECK-Hot Dipped Galvanized
Approx Box
Count Per
Head
Pound
Diameter Gauge
SIZE
1 Lbs
5 Lbs
30 Lbs
50 Lbs
6D
2"
135
9/32"
11
PD6DHDGSD1 PD6DHDGSD5 PD6DHDGSD30 PD6DHDGSD50
8D
2-1/2"
108
9/32"
11
10D
3"
78
9/32"
10
16D
3-1/2"
55
5/16"
9
HDG SPIKES SINGLE-Hot Dipped Galvanized
SIZE
Approx Box
Count Per Pound
Head
Size
Diameter
5 Lbs
50 Lbs
8"
3.2
3/4"
3/8"
PD8HDGSPK5
PD8HDGSPK50
10"
3
3/4"
3/8"
PD10HDGSPK5
PD10HDGSPK50
12"
2.5
3/4"
3/8"
PD12HDGSPK5
PD12HDGSPK50
HDG RING POLE BARN NAIL-Hot Dipped Galvanized
SIZE
GALVANIZED
POLEBARN NAIL
Approx Box
Count Per Pound Head Diameter
Gauge
5 Lbs
50 Lbs
16D
59
5/16"
9
PD16DHDGRPB50
PD16DHDGRPB50
20D
35
3/8"
7
PD20DHDGRPB50
PD20DHDGRPB50
40D
29
3/8"
7
PD40DHDGRPB50
PD40DHDGRPB50
16D
59
5/16"
9
PD16DHDGHTRPB5
PD16DHDGHTRPB50
20D
35
3/8"
7
PD20DHDGHTRPB5
PD20DHDGHTRPB50
40D
29
3/8"
7
PD40DHDGHTRPB5
PD40DHDGHTRPB50
60D
17
15/32"
5
PD60DHDGHTRPB5
PD60DHDGHTRPB50
For load bearing wooden
60D
17
15/32"
5
PD60DHDGRPB50 PD60DHDGRPB50
structures where greater
holding power is required.
Ring shank for an even HDG RING POLE BARN NAIL-Hot Dipped Galvanized-Tempered Hardened
stronger hold. Galvanized
Approx Box
to reduce weather
SIZE
Gauge
5 Lbs
50 Lbs
corrosion.
16
HDG FINISH NAIL-Hot Dipped Galvanized
GALVANIZED
FINISH NAIL
SIZE
For trim and finish
work. Head designed to
countersink below surface.
weather corrosion.
Box Count
Per Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
50 Lbs
4D
1-1/2"
625
0.1055"
15
PD4DHDGF1
PD4DHDGF5 PD4DHDGF50
6D
2"
285
0.135"
13
PD6DHDGF1
8D
2-1/2"
195
0.142"
12-1/2
PD8DHDGF1
10D
3"
120
0.155"
11-1/2
PD10DHDGF1 PD10DHDGF5 PD10DHDGF50
16D
3-1/2"
90
0.162"
11
PD16DHDGF1 PD16DHDGF5 PD16DHDGF50
HDG CASING NAIL-Hot Dipped Galvanized
GALVANIZED CASING
For trim, window frames,
door frames and decks.
weather corrosion.
GALVANIZED
GUTTER SPIKE
SIZE
Approx Box Count
Per Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
4D
1-1/2"
480
0.1205"
14
PD4DHDGCA1
PD4DHDGCA5
6D
2"
241
0.142"
12-1/2
PD6DHDGCA1
PD6DHDGCA5
8D
2-1/2"
148
0.155"
12-1/2
PD8DHDGCA1
PD8DHDGCA5
10D
3"
95
0.17"
10-1/2
PD10DHDGCA1 PD10DHDGCA5
12D
3-1/4"
88
0.17"
10-1/2
16D
3-1/2"
73
0.177"
10
HDG RING GUTTER SPIKE-Hot Dipped Galvanized
Long galvanized spikes
that drive in easily. Used
to hold galvanized steel
and aluminum gutters.
weather corrosion.
SIZE
Approx Box
Diameter
5 Lbs
50 Lbs
7"
16
7/16"
3/16"
PD7HDGRGS5
PD7HDGRGS50
8"
14
7/16"
3/16"
PD8HDGRGS5
PD8HDGRGS50
17
HDG FENCE STAPLES-Hot Dipped Galvanized
GALVANIZED
FENCE STAPLE
For attaching fencing to
wood posts. Galvanized
to reduce weather
corrosion.
GALVANIZED
POULTRY STAPLE
For attaching poultry net
to wood posts. Galvanized
to reduce weather
corrosion.
HARD CUT MASONRY
For fastening wood to
cinder block, brick, or fresh
concrete. Cut shank to
reduce wood splitting.
18
SIZE
Approx Box
Count Per
Pound
Crown
Gauge
1 Lbs
5 Lbs
1"
106
1/4"
9
PD1HDGFS1
PD1HDGFS5
1-1/4"
87
1/4"
9
PD114HDGFS1
PD114HDGFS5
1-1/2"
70
1/4"
9
PD112HDGFS1
PD112HDGFS5
1-3/4"
61
1/4"
9
PD134HDGFS1
PD134HDGFS5
PD134HDGFS50
2-1/2"
28
1/2"
9
PD212HDGFS1
PD212HDGFS5
PD212HDGFS50
50 Lbs
PD114HDGFS50
HDG POULTRY STAPLES-Hot Dipped Galvanized
SIZE
Approx Box
Count Per Pound
Crown
Gauge
1 Lbs
5 Lbs
50 Lbs
3/4"
498
3/16"
14
PD34HDGPS1
PD34HDGPS5
PD34HDGPS50
HARD CUT MASONRY-Hot Dipped Galvanized
Approx Box
Head
Count Per Pound Diameter Gauge
SIZE
1 Lbs
5 Lbs
50 Lbs
8D
2-1/2"
64
N/A
N/A
PD8DHDGHCM1 PD8DHDGHCM5
10D
3"
47
N/A
N/A
PD10DHDGHCM1 PD10DHDGHCM5 PD10DHDGHCM50
16D
3-1/2"
32
N/A
N/A
PD16DHDGHCM1 PD16DHDGHCM5 PD16DHDGHCM50
PD8DHDGHCM50
ROOFING AND SIDING
EG ROOFING NAIL-Electro Galvanized
Size
Approx Box
Count Per Lb
Head
Diameter
Gauge
1 Lbs
5 Lbs
EG ROOFING NAIL
3/4"
348
7/16"
11
PD34EGR1
PD34EGR5
For attaching shingles
and felt to wood. Wide
head for firm holding
power. Galvanized
to reduce weather
corrosion.
7/8"
305
7/16"
11
PD78EGR1
PD78EGR5
PD78EGR30
PD78EGR50
1"
275
7/16"
11
PD1EGR1
PD1EGR5
PD1EGR30
PD1EGR50
1-1/4"
220
7/16"
11
PD114EGR1
PD114EGR5 PD114EGR30 PD114EGR50
1-1/2"
189
7/16"
11
PD112EGR1
1-3/4"
155
7/16"
11
PD134EGR1
PD134EGR5
2"
145
7/16"
11
PD2EGR1
PD2EGR5
2-1/2"
118
7/16"
11
PD212EGR1
3"
95
7/16"
11
PD2EGR1
30 Lbs
50 Lbs
PD34EGR50
PD134EGR50
PD2EGR30
PD2EGR50
PD3EGR5
PD3EGR30
PD3EGR50
HDG ROOFING NAIL-Hot Dipped Galvanized
Size
Approx Box
Count Per Lb
Head
Diameter
Gauge
1 Lbs
5 Lbs
HDG ROOFING NAIL
3/4"
312
7/16"
11
PD34HDGR1
PD34HDGR5
For attaching shingles
and felt to wood. Wide
head for firm holding
power. Hot dipped
galvanized to provide
greater resistance to
weather corrosion.
7/8"
278
7/16"
11
PD78HDGR1
PD78HDGR5
PD78HDGR30
PD78HDGR50
1"
250
7/16"
11
PD1HDGR1
PD1HDGR5
PD1HDGR30
PD1HDGR50
1-1/4"
208
7/16"
11
PD114HDGR1
PD114HDGR5 PD114HDGR30 PD114HDGR50
1-1/2"
178
7/16"
11
PD112HDGR1
1-3/4"
150
7/16"
11
PD134HDGR1
PD134HDGR5
2"
136
7/16"
11
PD2HDGR1
PD2HDGR5
2-1/2"
105
7/16"
11
PD212HDGR1
3"
92
7/16"
11
PD3HDGR1
VINYL SIDING NAIL
For attaching vinyl siding.
Larger head for increase
holding power. Aluminum
for greater resistance to
weather corrosion.
30 Lbs
50 Lbs
PD34HDGR50
PD134HDGR50
PD2HDGR30
PD2HDGR50
PD3HDGR5
PD3HDGR30
PD3HDGR50
VINYL SIDING NAIL-Aluminum Ring Shank
SIZE
Approx Box Count
Per Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
30 Lbs
1-1/2"
575
3/8"
12
PD112ALVS1
PD112ALVS5
PD112ALVS30
2"
410
3/8"
12
PD2ALVS1
PD2ALVS5
PD2ALVS30
19
ROOFING AND SIDING
NEOPRENE ROOFING
For fastening steel
roofing/siding and
fiberglass. Neoprene
washer provides an
effective waterproof
seal. Ring shank offers
greater holding power.
Hot dipped galvanized
offers greater resistance
to weather corrosion.
HDG ROOFING NAIL-HDG-Neoprene Washer
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1 Lbs
1-1/2"
118
3/8"
10
PD112HDGNPR1
PD112HDGNPR5 PD112HDGNPR50
1-3/4"
108
3/8"
10
PD134HDGNPR1
2"
194
3/8"
10
PD2HDGNPR1
2-1/2"
80
3/8"
10
PD212HDGNPR1
3"
65
3/8"
10
PD3HDGNPR1
3 1/2"
48
3/8"
9
PD312HDGNPR1
5 Lbs
PD2HDGNPR5
50 Lbs
PD2HDGNPR50
PD3HDGNPR5
PD3HDGNPR50
PLASTIC CAP ROOFING NAIL-Electro Galvanized
PLASTIC CAP ROOFING
For fastening exterior
house wrap and felt paper
in place. Ring shank for
greater holding power.
weather corrosion.
SIZE
Approx Box Count
Per Pound
Head
Diameter
Gauge
1 Lbs
2M
1"
255
1"
12
PD1PC1
PD1PC2M
1-1/4"
214
1"
12
PD114PC1
PD114PC2M
1-1/2"
189
1"
12
PD112PC1
PD112PC2M
2"
155
1"
12
PD2PC1
PD2PC2M
3"
119
1"
12
PD3PC1
PD3PC2M
GALVANIZED SIDING
Thin shank and blunt tip
to reduce wood splitting. HDG SIDING-Hot Dipped Galvanized
Screw shank for stronger
Approx Box
Count Per
Head
holding power. Hot dipped
SIZE
Pound
Diameter
Gauge
galvanized to provide
8D
2-1/2"
190
7/32"
13
greater weather corrosion.
20
1 Lbs
5 Lbs
30 Lbs
PD8DHDGSS1
PD8DHDGSS5
PD8DHDGSS30
DRYWALL FASTENERS
RING DRYWALL NAIL
For attaching drywall to
wood studs. Long point
reduces cracking
in drywall.
RING DRYWALL
SIZE
Approx Box
Count Per Pound
Head
Diameter
Gauge
1 Lbs
5 Lbs
50 Lbs
1-3/8"
316
19/64"
12-1/2
PD138RDW1
PD138RDW5
PD138RDW50
1-3/4"
308
19/64"
12-1/2
PD134RDW1
PD134RDW5
PD134RDW50
1-5/8"
299
19/64"
12-1/2
PD158RDW1
PD158RDW5
PD158RDW50
COATED CUPPED DRYWALL
COATED CUPPED
DRYWALL NAIL
For attaching drywall
to wood. Cupped head
designed to countersink
into drywall for easy fill.
Smooth shank.
SIZE
Approx Box
Count Per
Pound
Head
Diameter
Gauge
1-1/4"
390
9/32"
13-1/2
PD114CCDW1 PD114CCDW5 PD114CCDW30 PD114CCDW50
1-3/8"
360
9/32"
13-1/2
1-5/8"
270
19/64"
13
2"
240
19/64"
13
1 Lbs
PD2CCDW1
5 Lbs
PD2CCDW5
30 Lbs
PD2CCDW30
50 Lbs
PD2CCDW50
21
DRYWALL FASTENERS
FINE SCREWS DRYWALL
SIZE
Approx Box Bulk
Count Per Carton
Pound
QTY
DRIVE
Point
1 Lbs
5 Lbs
30 Lbs
PD1FSDW1
PD1FSDW5
PD1FSDW30
50 Lbs
DRYWALL SCREW
1"
310
10M
#2Phillps Sharp
Fine thread provides
superior holding power
when attaching drywall
to light gauge steel
studs.
1-1/4"
260
8M
#2Phillps Sharp PD114FSDW1 PD114FSDW5 PD114FSDW30 PD114FSDW50
1-5/8"
201
5M
#2Phillps Sharp PD158FSDW1 PD158FSDW5 PD158FSDW30 PD158FSDW50
2"
176
3.5M
2-1/4"
136
3M
#2Phillps Sharp PD214FSDW1 PD214FSDW5
2-1/2"
119
2.5
#2Phillps Sharp PD212FSDW1 PD212FSDW5
3"
85
2M
#2Phillps Sharp
PD3FSDW1
PD3FSDW5
4"
44
1M
#2Phillps Sharp
PD4FSDW1
PD4FSDW5
#2Phillps Sharp
PD2FSDW1
PD2FSDW5
COARSE SCREWS DRYWALL
SIZE
DRYWALL SCREW
Coarse thread provides
superior holding power
when attaching drywall
to wood studs.
SELF-DRILL
DRYWALL SCREW
Fine thread self-drill for
attaching drywall to 20
ga. to 14 ga. steel studs.
22
Approx Box
Count Per Bulk Carton
Pound
QTY
DRIVE
Point
1 Lbs
5 Lbs
30 Lbs
PD1CSDW5
PD1CSDW30
1"
260
10M
#2Phillps
Sharp
PD1CSDW1
1-1/4"
201
8M
#2Phillps
Sharp
PD114CSDW1
PD114CSDW5 PD114CSDW30
1-5/8"
176
5M
#2Phillps
Sharp
PD158CSDW1
2"
136
3.5M
#2Phillps
Sharp
PD2CSDW1
2-1/2"
119
2.5M
#2Phillps
Sharp
PD212CSDW1
3"
85
2M
#2Phillps
Sharp
PD3CSDW1
3-1/2"
67
1M
#2Phillps
Sharp
PD312CSDW1
4"
45
1M
#2Phillps
Sharp
PD4CSDW1
PD4CSDW5
PD4CSDW30
DRIVE
Point
1 Lbs
5 Lbs
30 Lbs
PD2CSDW5
PD2CSDW30
PD3CSDW5
PD3CSDW30
SELF-DRILL SCREWS DRYWALL
SIZE
Approx Box
Count Per Bulk Carton
Pound
QTY
1-1/4"
255
8M
#2Phillps
Self-Drill
PD114SDDW1 PD114SDDW5 PD114SDDW30
1-5/8"
200
5M
#2Phillps
Self-Drill
PD158SDDW1 PD158SDDW5 PD158SDDW30
SPECIALTY FASTENERS
STRUCTURAL SCREW STRUCTURAL SCREW
Use for exterior projects in
Box Count Per
place of lag bolts without
SIZE
Pound
pre-drilling. Large washer
4"
22
head, coated for superior
6"
22
corrosion resistance.
DRIVE
POINT
1 Lbs
5 Lbs
Star
Sharp
PD4SHSS1
PD4SHSS5
Star
Sharp
PD6SHSS1
PD6SHSS5
YELLOW ZINC SCREW-GENERAL PURPOSE (NOT ACQ APPROVED)
YELLOW ZINC
SCREWS
For exterior projects
where corrosion is not
a factor. #2 Phillips
head, coarse thread
and sharp point.
FINISH & TRIM SCREW
For attaching wood
trim and base to wood
substrate.
STAINLESS STEEL
TRIM SCREW
SIZE
Approx Box Count
Per Pound
DRIVE
POINT
1 Lbs
5 Lbs
1-1/4"
260
#2Phillips
Sharp
PD114YZS1
PD114YZS5
1-5/8"
210
#2Phillips
Sharp
PD158YZS1
PD158YZS5
2"
176
#2Phillips
Sharp
PD2YZS1
PD2YZS5
2-1/2"
136
#2Phillips
Sharp
PD212YZS1
PD212YZS5
3"
119
#2Phillips
Sharp
PD3YZS1
PD3YZS5
3-1/2"
85
#2Phillips
Sharp
PD312YZS1
PD312YZS5
4"
45
#2Phillips
Sharp
PD4YZS1
PD4YZS5
FINISH & TRIM SCREWS-Phosphate Coated
SIZE
Box Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
1-5/8" x 6
205
#1Square
Drill
PD158SQHTS1
PD158SQHTS5
2-1/4" x 6
140
#1Square
Drill
PD214SQHTS1
PD214SQHTS5
304 STAINLESS STEEL TRIM SCREWS- #1 SQUARE DRIVE - Drill Point
For trim and railings
where ultimate corrosion
resistance is required.
Head is easily hidden for
smooth finish.
SIZE
Box Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
1-5/8"
211
#1 Square
Drill
PD158SSSQHTS1
PD158SSSQHTS5
2-1/4"
128
#1 Square
Drill
PD214SSSQHTS1
PD214SSSQHTS5
23
SPECIALTY FASTENERS
POST FRAME SCREW SELF PIERCE-PLAIN
SIZE
Approx Box
Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
30 Lbs
1"
155
1/4" HEX
Self Pierce
PD1HXPFS1
PD1HXPFS5
PD1HXPFS30
1-1/2"
118
1/4" HEX
Self Pierce
PD112HXPFS1
PD112HXPFS5
PD112HXPFS30
2"
86
1/4" HEX
Self Pierce
PD2HXPFS1
PD2HXPFS5
PD2HXPFS30
2-1/2"
72
1/4" HEX
Self Pierce
PD212HXPFS1
PD212HXPFS5
PD212HHXPFS30
POST FRAME SCREW SELF PIERCE-WHITE
POST FRAME
SCREW SELF
PIERCE
For attaching metal
roofing and siding
to wood framing.
Neoprene washer
provides an effective
waterproof seal.
Available in four
colors: plain, white,
green, red
SIZE
Approx Box
Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
30 Lbs
1"
155
1/4" HEX
Self Pierce
PD1WHXPFS1
PD1WHXPFS5
PD1WHXPFS30
1-1/2"
118
1/4" HEX
Self Pierce
PD112WHXPFS1
PD112WHXPFS5
PD112WHXPFS30
2"
86
1/4" HEX
Self Pierce
PD2WHXPFS1
PD2WHXPFS5
PD2WHXPFS30
2-1/2"
72
1/4" HEX
Self Pierce
PD212WHXPFS1
PD212WHXPFS5
PD212WHXPFS30
POST FRAME SCREW SELF PIERCE-GREEN
SIZE
Approx Box
Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
30 Lbs
1"
155
1/4" HEX
Self Pierce
PD1GHXFS1
PD1GHXPFS5
PD1GHXPFS30
1-1/2"
118
1/4" HEX
Self Pierce
PD112GHXFS1
PD112GHXPFS5
PD112GHXPFS30
2"
86
1/4" HEX
Self Pierce
PD2GHXFS1
PD2GHXPFS5
PD2GHXPFS30
2-1/2"
72
1/4" HEX
Self Pierce
PD212GHXFS1
PD212GHXPFS5
PD212GHXPFS30
POST FRAME SCREW SELF PIERCE-RED
24
SIZE
Approx Box
Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
30 Lbs
1"
155
1/4" HEX
Self Pierce
PD1RHXFS1
PD1RHXPFS5
PD1RHXPFS30
1-1/2"
118
1/4" HEX
Self Pierce
PD112RHXFS1
PD112RHXPFS5
PD112RHXPFS30
2"
86
1/4" HEX
Self Pierce
PD2RHXFS1
PD2RHXPFS5
PD2RHXPFS30
2-1/2"
72
1/4" HEX
Self Pierce
PD212RHXFS1
PD212RHXPFS5
PD212RHXPFS30
SPECIALTY FASTENERS
TRIM NAILS-ALUMINUM-5 Colors
TRIM NAIL
ALUMINUM
1 1/4" Aluminum Trim Colored nails to match
soffit and trim. DO NOT
USE WITH ACQ OR CA.
SIZE
Approx Box Count
Per Pound
Head
Diameter
Gauge
COLOR
1 Lbs
1-1/4"
1020
3/16"
0.099
WHITE
PD114WALTN1
1-1/4"
1020
3/16"
0.099
BROWN
PD114BALTN1
1-1/4"
1020
3/16"
0.099
CLAY
PD114CALTN1
1-1/4"
1020
3/16"
0.099
ALMOND
PD114AALTN1
1-1/4"
1020
3/16"
0.099
GREY
PD114GALTN1
TRIM NAILS-STAINLESS STEEL-5 Colors
TRIM NAIL
STAINLESS
1 1/4" Stainless Trim Colored nails to match
soffit and trim. ACCEPTED
WITH ACQ OR CA.
MAZE PTL GALV. DECK
For attaching composite
decking. Manufacturers
of composite decking
recommend and specify,
hot-dipped galvanized or
stainless steel fasteners.
MAZE SPLIT-LESS
SIZE
Approx Box Count
Per Pound
Head
Diameter
Gauge
COLOR
1 Lbs
1-1/4"
690
3/16"
15
WHITE
PD114WSSTN1
1-1/4"
690
3/16"
15
BROWN
PD114BSSTN1
1-1/4"
690
3/16"
15
CLAY
PD114CSSTN1
1-1/4"
690
3/16"
15
ALMOND
PD114ASSTN1
1-1/4"
690
3/16"
15
GREY
PD114GSSTN1
MAZE PTL GALVANIZED DECKING-Hot Dipped Galvanized
SIZE
Approx Box Count
Per Pound
Head Diameter
Gauge
5 Lbs
8D
2-1/2"
189
7/32"
11
MAZET447A5
10D
3"
155
7/32"
11
MAZET449A5
16D
3-1/4"
113
7/32"
11
MAZET4491A5
MAZE SPLIT-LESS WOOD SIDING
Designed for split-prone
woods such as cedar
and redwood. Slim,
sturdy shank and special
blunt point virtually
eliminate splits.
SIZE
Approx Box Count
Per Pound
Head
Diameter
Gauge
5 Lbs
50 Lbs
6D
1-1/2"
577
3/8"
12
MAZES225A5
MAZES225A50
8D
2"
434
3/8"
12
MAZES227A5
MAZES227A50
10D
3"
428
3/8"
13
MAZES229A5
MAZES229A50
25
SPECIALTY FASTENERS
CERAMIC SCREWS (STAR HEAD-ACQ APPROVED) GREEN
CERAMIC SCREWS
STAR HEAD
For exterior deck and
railing projects where
corrosion resistance is
important. Star Head
(Torx), coarse thread,
drill point and ACQ
approved.
CERAMIC SCREWS
COMBO DRIVE
For exterior deck and
railing projects where
corrosion resistance is
important. Combo Head
(Square or Phillips drive),
coarse thread, drill point
and ACQ approved.
304 STAINLESS
STEEL DECK
For decks, siding, and a
variety of structures that
use treated wood. #2
Square head, drill point,
and 304 Stainless Steel.
Best corrosion resistant
fastener.
26
SIZE
Approx Box
Count Per Pound
DRIVE
POINT
1 Lbs
5 Lbs
30 Lbs
1-1/4’’
260
Star
Drill
PD114GSHCS1
PD114GSHCS5
PD114GSHCS30
1-5/8"
210
Star
Drill
PD158GSHCS1
PD158GSHCS5
PD158GSHCS30
2"
176
Star
Drill
PD2GSHCS1
PD2GSHCS5
PD2GSHCS30
2-1/2"
136
Star
Drill
PD212GSHCS1
PD212GSHCS5
PD212GSHCS30
3"
119
Star
Drill
PD3GSHCS1
PD3GSHCS5
PD3GSHCS30
3-1/2"
85
Star
Drill
PD312GSHCS1
PD312GSHCS5
PD312GSHCS30
4"
77
Star
Drill
PD4GSHCS1
PD4GSHCS5
PD4GSHCS30
CERAMIC SCREWS (COMBO HEAD-ACQ APPROVED) GREEN
SIZE
Approx Box
Count Per Pound
DRIVE
POINT
1 Lbs
5 Lbs
30 Lbs
1-1/4"
260
Combo
Drill
PD114GCHCS1
PD114GCHCS5
PD114GCHCS30
1-5/8"
210
Combo
Drill
PD158GCHCS1
PD158GCHCS5
PD158GCHCS30
2"
176
Combo
Drill
PD2GCHCS1
PD2GCHCS5
PD2GCHCS30
2-1/2"
136
Combo
Drill
PD212GCHCS1
3"
119
Combo
Drill
PD3GCHCS1
PD3GCHCS5
PD3GCHCS30
3-1/2"
85
Combo
Drill
PD312GCHCS1
PD312GCHCS5
PD312GCHCS30
PD212GCHCS5 PD212GCHCS30
304 STAINLESS DECK SCREW #2 SQUARE DRIVE - DRILL POINT
SIZE
Approx Box Count
Per Pound
DRIVE
POINT
1 Lbs
5 Lbs
1-1/4"
260
#2 Square
Drill
PD114SSSQHDS1
PD114SSSQHDS5
1-5/8"
210
#2 Square
Drill
PD158SSSQHDS1
PD158SSSQHDS5
2"
176
#2 Square
Drill
PD2SSSQHDS1
PD2SSSQHDS5
2-1/2"
136
#2 Square
Drill
PD212SSSQHDS1
PD212SSSQHDS5
3"
119
#2 Square
Drill
PD3SSSQHDS1
PD3SSSQHDS5
SPECIALTY FASTENERS
COMPOSITE DECK SCREWS (SQUARE HEAD-ACQ)
GREEN
COMPOSITE
DECK SCREWS
SQUARE HEAD
COLORS: BROWN,
GREEN, GREY
Ideal for applications
using poly or composite
lumber. Square drive
recess is deep and
provides a clean formed
look as well as reduces
spinouts. Pancake head
reduces overdriving,
mushrooming, and
leaves a clean smooth
surface. Type 17 point
reduces the need to
pre-dill boards.
SIZE
Approx Box
Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
CARTON
1-5/8"
146
Square
Type 17
PD158GSQCPDS1
PD158GSQCPDS5
PD158GSQCPDSCTN
2"
120
Square
Type 17
PD2GSQCPDS1
PD2GSQCPDS5
PD2GSQCPDSCTN
2-1/2"
72
Square
Type 17
PD212GSQCPDS1
PD212GSQCPDS5
PD212GSQCPDSCTN
3"
52
Square
Type 17
PD3GSQCPDS1
PD3GSQCPDS5
PD3GSQCPDSCTN
3-1/2"
46
Square
Type 17
PD312GSQCPDS1
PD312GSQCPDS5
PD312GSQCPDSCTN
BROWN
SIZE
Approx Box
Count Per
Pound
DRIVE
POINT
1 Lbs
5 Lbs
CARTON
1-5/8"
146
Square
Type 17
PD158BSQCPDS1
PD158BSQCPDS5
PD158BSQCPDSCTN
2"
120
Square
Type 17
PD2BSQCPDS1
PD2BSQCPDS5
PD2BSQCPDSCTN
2-1/2"
72
Square
Type 17
PD212BSQCPDS1
PD212BSQCPDS5
PD212BSQCPDSCTN
3"
52
Square
Type 17
PD3BSQCPDS1
PD3BSQCPDS5
PD3BSQCPDSCTN
3-1/2"
46
Square
Type 17
PD312BSQCPDS1
PD312BSQCPDS5
PD312BSQCPDSCTN
GREY
SIZE
Approx Box
Count Per
Pound
DRIVE
POINT
1-5/8"
146
Square
Type 17
2"
120
Square
Type 17
2-1/2"
72
Square
Type 17
3"
52
Square
Type 17
3-1/2"
46
Square
Type 17
1 Lbs
5 Lbs
CARTON
PD158GYSQCPDS1 PD158GYSQCPDS5 PD158GYSQCPDSCTN
PD2GYSQCPDS1
PD2GYSQCPDS5
PD2GYSQCPDSCTN
PD3GYSQCPDS1
PD3GYSQCPDS5
PD3GYSQCPDSCTN
27
Your Complete Collated Nail Headquarters
BOSTITCH
PASLODE
HITACHI
SENCO
28
COLLATED FASTENERS
HITACHI ROUND-HEAD SERIES NAILS
INTERCHANGES WITH: BOSTITCH RH, DUO-FAST RH, HITACHI RH, GRIP RITE RH, PORTER-CABLE RH, SENCO RH SERIES
Item Code
Description Finish / Type Shank / Type M’s / Carton BX’s/ Carton
Cartons /
Pallet
Appx Ctn Wt
Lbs
21 DEGREE / FRAMING / PLASTIC STRIP / BRIGHT
21 Degree
Plastic- Strip
Framing Nails
AD10102
2-3/8" X .113
Bright
Smooth
2.5
1
84
34.24
AD10103
2-3/8" X .113
Bright
Ring
2.5
1
84
34.24
AD10105
3" X .120
Bright
Smooth
2.5
1
84
38.67
AD10110
3" X .131
Bright
Smooth
2.5
1
84
45.7
AD10111
3-1/4" X .131
Bright
Smooth
2.5
1
84
49.54
21 DEGREE / FRAMING / PLASTIC STRIP / HOT DIPPED GALVANIZED
AD10161
2-3/8" X .113
HDG
Ring
2.5
1
84
39.57
AD10302
3" X 120
HDG
Ring
2.5
1
84
43.96
AD10163
3-1/4" X .131
HDG
Smooth
2.5
1
84
53.79
Cartons /
Pallet
Appx Ctn Wt
Lbs
BOSTITCH S-SERIES NAILS
INTERCHANGES WITH: ATRO 679-5600, ISM, BOSTITCH CH
Item Code
BX’s/
Description Finish / Type Shank / Type M’s / Carton Carton
28 DEGREE / CLIPPED HEAD / BRIGHT
28 Degree
Framing Nails
ADS8D
2-3/8" X 113
Bright
Smooth
2.5
1
84
34.24
ADS8DR
2-3/8" X 113
Bright
Ring
2.5
1
84
34.24
ADS10D
3" X 120
Bright
Smooth
2.5
1
84
38.67
ADS10D131
3" X 131
Bright
Smooth
2.5
1
84
45.7
ADS12D131
3-1/4" X 131
Bright
Smooth
2.5
1
84
49.54
28 DEGREE / CLIPPED HEAD / HOT DIPPED GALVANIZED
ADS8DRGAL
2-3/8" X 113
HDG
Ring
2.5
1
84
34.24
ADS10DRGAL
3" X 120
HDG
Ring
2.5
1
84
38.67
ADS12D131GAL
3-1/4" X 131
HDG
Smooth
2.5
1
84
49.54
29
COLLATED FASTENERS
SENCO CLIPPED-HEAD PAPER-TAPE SERIES NAILS
INTERCHANGES WITH: DEWALT CH, HITACHI 15100, PORTER CABLE FC, SENCO CH, BOSTITCH PT
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
33 DEGREE PAPER TAPE / CLIPPED HEAD / BRIGHT
33 Degree
Paper-Tape
Framing Nails
ADGC24APBN 2-3/8" x .113
Bright
Smooth
2.5
1
84
34.24
ADGE24APAN 2-3/8" x .113
Bright
Ring
2.5
1
84
34.24
ADHC27APB
3" X .120
Bright
Smooth
2.5
1
84
38.67
ADKC27APBN
3" X .131
Bright
Smooth
2.5
1
84
45.7
Bright
Smooth
2.5
1
84
49.54
ADKC28APBN 3-1/4" X .131
33 DEGREE PAPER TAPE / CLIPPED HEAD / HOT DIPPED GALVANIZED
ADGE24ASBK 2-3/8" x .113
HDG
Ring
2.5
1
84
39.57
ADHE27ASBK
HDG
Ring
2.5
1
84
43.96
HDG
Smooth
2.5
1
84
53.79
3" X .120
ADKC28ASBK 3-1/4" X .131
PASLODE PAPER-TAPE CLIPPED-HEAD SERIES NAILS
INTERCHANGES WITH: DEWALT CH, HITACHI 15100, PORTER CABLE FC, SENCO CH, BOSTITCH PT
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
33 DEGREE PAPER TAPE / CLIPPED HEAD / BRIGHT
33 Degree
Paper-Tape
Clipped Head
AD097394
2-3/8" X 113
Bright
Smooth
2.5
1
80
32.56
AD097397
2-3/8" X 113
Bright
Ring
2.5
1
80
32.36
AD097971
3" X 120
Bright
Smooth
2.5
1
84
23.85
AD401838
3" X 131
Bright
Smooth
2.5
1
84
27.98
AD097975
3-1/4" X 131
Bright
Smooth
2.5
1
84
31.13
33 DEGREE PAPER TAPE/ CLIPPED HEAD / HOT DIPPED GALVANIZED
30
AD097398
2-3/8" X 113
HDG
Ring
2.5
1
80
32.36
AD403470
3" x 120
HDG
Ring
2.5
1
84
23.85
AD403469
3-1/4" x 131
HDG
Smooth
2.5
1
84
28.70
COLLATED FASTENERS
PASLODE PAPER-TAPE ROUND-DRIVE SERIES NAILS
33 Degree
Paper-Tape Round
Drive
INTERCHANGES WITH: PASLODE, HITACHI
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
33 DEGREE PAPER TAPE / OFFSET HEAD / BRIGHT
AD650237
2-3/8" X 113
Bright
Smooth
2.5
1
84
32.56
AD650238
2-3/8" X 113
Bright
Ring
2.5
1
84
32.36
AD650236
3" X 120
Bright
Smooth
2.5
1
84
23.85
AD650210
3" X 131
Bright
Smooth
2.5
1
84
27.98
AD650239
3-1/4" X 131
Bright
Smooth
2.5
1
84
31.13
33 DEGREE PAPER TAPE/ OFFSET HEAD / HOT DIPPED GALVANIZED
AD650383
2-3/8" X 113
HDG
Ring
2.5
1
84
32.36
AD650385
3" x 120
HDG
Ring
2.5
1
84
23.85
AD650388
3-1/4" x 131
HDG
Smooth
2.5
1
84
28.7
AD650474
3-1/4" X .131
HDG
Ring
2.5
1
84
BOSTITCH COIL SERIES NAILS
15 Degree Coil
Framing Nails
INTERCHANGES WITH: ATRO 126-570, HITACHI 12200, MAX, PASLODE, SENCO, PORTER CABLE
Item Code
Description Finish / Type Shank / Type M’s / Carton
BX’s/
Carton
Cartons /
Pallet
Appx Ctn
Wt Lbs
15 DEGREE / FRAMING / WIRE COIL / BRIGHT
ADC8P113D
2-3/8" X .113
Bright
Smooth
3.6
1
60
34.24
ADC8R113D
2-3/8" X .113
Bright
Ring
3.6
1
60
34.24
ADC10P120D
3" X .120
Bright
Screw
2.7
1
60
38.67
ADC10P131D
3" X .131
Bright
Smooth
2.7
1
60
45.7
ADC12P120D
3-1/4" X .120
Bright
Smooth
2.7
1
60
42.81
ADC12P131D
3-1/4" X .131
Bright
Smooth
2.7
1
60
49.54
15 DEGREE / FRAMING / WIRE COIL / HOT DIPPED GALVANIZED
ADC8R99DG
2-3/8" x 99
HDG
Ring
3.6
1
60
29.52
ADC10P120DG
3" X .120
HDG
Smooth
2.7
1
60
44
15 DEGREE / SIDING / WIRE COIL / ELECTRO GALVANIZED
ADC6R90BDG
2" X .090
EG
Ring
3.6
1
60
14.4
ADC7R90BDG
2-1/4" X .090
EG
Ring
3.6
1
60
16.2
31
COLLATED FASTENERS
METAL CONNECTOR NAIL
INTERCHANGES WITH: BOSTITCH MCN, PASLODE MCN, HITACHI MCN
Metal Connector Nail
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
33 DEGREE STRAP TITE / PAPER TAPE / HOT DIPPED GALVANIZED
AD17134
1-1/2" x .148
HDG
Smooth
3
1
96
22.8
ROOFING NAIL
INTERCHANGES WITH: DUO-FAST CRW, HITACHI 12100, MAX, PORTER CABLE RN, SENCO HJ, BOSTITCH, DEWALT
Item Code
ROOFING NAIL
Cartons /
Pallet
Appx Ctn
Wt Lbs
15 DEGREE COIL ROOFING NAIL / ELECTRO GALVANIZED
ADCR3DGAL 1-1/4" x .120
EG
Smooth
7.2
1
48
32.4
ADCR4DGAL 1-1/2" x .120
EG
Smooth
7.2
1
40
38.79
ADCR5DGAL 1-3/4" x .120
EG
Smooth
7.2
1
32
44.9
SENCO N-WIRE SERIES STAPLES
INTERCHANGES WITH: ATRO 110, BEA 14, HITACHI 11200, JK 783, PORTER-CABLE MS
7/16" Crown
“N” Wire Staple
32
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
MEDIUM CROWN STAPLES: 7/16” CROWN, 16 GAUGE, ELECTRO GALVANIZED
ADN17BAB
1-1/2”
EG
Smooth
10
1
60
20
ADN19BAB
1-3/4”
EG
Smooth
10
1
60
20
ADN21BAB
2”
EG
Smooth
10
1
60
21
COLLATED FASTENERS
PASLODE GS16 SERIES STAPLES
INTERCHANGES WITH: PASLODE GS16
1/2" Crown
“GS” Staple
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
MEDIUM CROWN STAPLES: 1/2" CROWN, 16 GAUGE, ELECTRO GALVANIZED
ADGS16112
1-1/2"
EG
Smooth
10
1
60
20
ADGS16134
1-3/4"
EG
Smooth
10
1
60
20
ADGS162
2"
EG
Smooth
10
1
60
21
Cartons /
Pallet
Appx Ctn
Wt Lbs
BOSTITCH 16S4 SERIES STAPLES
INTERCHANGES WITH: ATRO 116, ISM 16NC, SPOTNAILS 7600
1/2" Crown 16 Gauge
Bostitch Staple
Item Code
MEDIUM CROWN STAPLES: 1/2" CROWN, 16 GAUGE, ELECTRO GALVANIZED
AD16S438G
1-1/2"
EG
Smooth
10
1
60
34.94
AD16S450G
2"
EG
Smooth
10
1
60
45.36
SENCO P-SERIES STAPLES
INTERCHANGES WITH: DUO-FAST 1700, HITACHI 11300, JK 784, PORTER-CABLE WS
1" Wide-Crown
Senco Staple
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
WIDE CROWN STAPLES: 1" CROWN, 16 GAUGE, ELECTRO GALVANIZED
ADP13BAB
1"
EG
Smooth
10
1
60
20
ADP15BAB
1-1/4"
EG
Smooth
10
1
60
20
ADP17BAB
1-1/2"
EG
Smooth
10
1
60
20
33
COLLATED FASTENERS
BOSTITCH 16S2 SERIES STAPLES
INTERCHANGES WITH: ATRO 119, BEA 140 ISM 38, SPOTNAILS 1600
1" Wide-Crown
Bostitch Staple
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
WIDE CROWN STAPLES: 1" CROWN, 16 GAUGE, ELECTRO GALVANIZED
AD16S225G
1"
EG
Smooth
10
1
60
32.31
AD16S231G
1-1/4"
EG
Smooth
10
1
60
37.18
AD16S238G
1-1/2"
EG
Smooth
10
1
60
41.35
Cartons /
Pallet
Appx Ctn
Wt Lbs
PASLODE GSW SERIES STAPLES
INTERCHANGES WITH: HAUBOLD 3200
15/16" Wide-Crown
GSW Staple
Item Code
WIDE CROWN STAPLES: 15/16" CROWN, 16 GAUGE ELECTRO GALVANIZED
ADGSW161
1"
EG
Smooth
10
1
60
20
ADGSW16114
1-1/4"
EG
Smooth
10
1
60
21
ADGSW16112
1-1/2"
EG
Smooth
10
1
60
21
BOSTITCH SB-SERIES FINISH NAILS
INTERCHANGES WITH: DUO-FAST CRW, HITACHI 12100, MAX, PORTER CABLE RN, SENCO HJ, BOSTITCH, DEWALT
Item Code
16 Gauge
Straight Finish Nails
34
Cartons /
Pallet
Appx Ctn
Wt Lbs
16 GAUGE STRAIGHT FINISH NAILS
ADSB16125
1-1/4"
Bright
Smooth
2.5
10
60
30
ADSB16150
1-1/2"
Bright
Smooth
2.5
10
50
30
ADSB16175
1-3/4"
Bright
Smooth
2.5
10
42
30
ADSB162
2"
Bright
Smooth
2.5
10
38
30
COLLATED FASTENERS
SENCO DA-SERIES FINISH NAILS
INTERCHANGES WITH: DUO-FAST DAFN, PORTER CABLE DA, DEWALT, HITACHI
Item Code
15 Gauge
DA Series
Finish Nails
Cartons /
Pallet
Appx Ctn
Wt Lbs
15 GAUGE ANGLE FINISH NAILS
ADDA15EPB
1-1/4"
Bright
Smooth
4
4
32
25
ADDA17EPB
1-1/2"
Bright
Smooth
4
4
26
25
ADDA19EPB
1-3/4"
Bright
Smooth
4
4
34
25
ADDA21EPB
2"
Bright
Smooth
4
4
31
26
ADDA25EPB
2-1/2"
Bright
Smooth
4
2
36
12
Cartons /
Pallet
Appx Ctn
Wt Lbs
BOSTITCH BT-SERIES BRADS NAILS
INTERCHANGES WITH: PASLODE 650, HITACHI 14100, SENCO AX
Item Code
18 Gauge
Brad Nails
18 GAUGE BRAD
ADBT1303
3/4"
Bright
Smooth
10
10
30
35
ADBT1309
1"
Bright
Smooth
5
10
30
35
ADBT1332
1-1/4"
Bright
Smooth
5
10
32
30
ADBT1345
1-3/4"
Bright
Smooth
5
10
34
30
ADBT1350
2"
Bright
Smooth
5
10
32
30
35
COLLATED FASTENERS
PASLODE 16 GA STRAIGHT FINISH NAILS
16 Gauge
Straight Finish Nail
INTERCHANGES WITH: DF700, HITACHI 14200, PASLODE 095, BOSTITCH SB
Item Code
Description
Finish / Type Shank / Type
M’s /
Carton
BX’s /
Carton
Cartons /
Pallet
Appx Ctn
Wt Lbs
16 GAUGE STRAIGHT FINISH NAILS
AD650282
1-1/4”
Bright
Smooth
2.5
10
60
30.00
AD650283
1-1/2”
Bright
Smooth
2.5
10
50
30.00
AD650284
1-3/4”
Bright
Smooth
2.5
10
42
30.00
AD650285
2”
Bright
Smooth
2.5
10
38
30.00
AD650287
2-1/2”
Bright
Smooth
2.5
10
32
30.00
Cartons /
Pallet
Appx Ctn
Wt Lbs
PASLODE 16 GA ANGLE FINISH NAILS
16 Gauge
Angle Finish Nail
INTERCHANGES WITH: PASLODE
Item Code
Description
M’s /
Carton
BX’s /
Carton
AD650230
1-1/4”
Bright
Smooth
2
10
60
30.00
AD650231
1-1/2”
Bright
Smooth
2
10
50
30.00
AD650046
1-3/4”
Bright
Smooth
2
10
42
30.00
AD650047
2”
Bright
Smooth
2
10
38
30.00
AD650232
2-1/2”
Bright
Smooth
2
10
32
30.00
Cartons /
Pallet
Appx Ctn
Wt Lbs
BOSTITCH FN-SERIES FINISH NAILS
15 Gauge
Angle Finish Nail
INTERCHANGES WITH:GRTFN250, FN59, N60FN, N62FN, AF63
Item Code
Description
M’s /
Carton
BX’s /
Carton
36
ADFN1520
1-1/4”
Bright
Smooth
4
4
32
25.00
ADFN1524
1-1/2”
Bright
Smooth
4
4
26
25.00
ADFN1528
1-3/4”
Bright
Smooth
4
4
34
25.00
ADFN1532
2”
Bright
Smooth
4
4
31
26.00
ADFN1540
2-1/2”
Bright
Smooth
4
2
36
12.00
COLLATED FASTENERS
SENCO L-SERIES STAPLES
INTERCHANGES WITH: ATRO 90, BEA 90, HAUBOLD 6000, HITACHI 11100, JK 781, PORTER CABEL NS
Item Code
Cartons /
Pallet
Appx Ctn
Wt Lbs
NARROW CROWN STAPLES: 1/4 CROWN, 18 GAUGE, GALVANIZED
18 Gauge
1/4" Crown
”L” Series Staple
ADL11BAB
3/4"
EG
Smooth
5
10
48
30
ADL12BAB
7/8"
EG
Smooth
5
10
48
30
ADL13BAB
1"
EG
Smooth
5
10
48
31
ADL14BAB
1-1/8"
EG
Smooth
5
6
60
31
ADL15BAB
1-1/4"
EG
Smooth
5
6
48
30
ADL17BAB
1-1/2"
EG
Smooth
5
6
48
30
Cartons /
Pallet
Appx Ctn
Wt Lbs
BOSTITCH SX-SERIES STAPLES
Item Code
18 Gauge
1/4" Crown
“SX” Series Staple
NARROW CROWN STAPLES: 1/4" CROWN 18 GAUGE STAPLES, GALVANIZED
ADSX503534
3/4"
EG
Smooth
5
10
68
34
ADSX50351
1"
EG
Smooth
5
10
52
46
ADSX5035118
1-1/8"
EG
Smooth
3
10
80
30
ADSX5035114
1-1/4"
EG
Smooth
3
10
68
35
ADSX5035112
1-1/2"
EG
Smooth
3
10
48
43.5
37
BIGGER SWEET SPOT, BETTER PERFORMANCE
* 75% LARGER STRIKE FACE
Introducing the Bostitch® AntiVibe® Hammer… its breakthrough design features a *75%
larger strike face for improved accuracy. By applying the same oversized technology that
revolutionized the way golf and tennis are played, we have completely changed the game
for professional contractors on the jobsite.
Find your sweet spot … drive the next nail with a Bostitch® AntiVibe® Hammer.
www.bostitch.com
© 2011 Stanley Black & Decker, Inc.
THE AUTHENTIC BLUE
1
2
3
4
5
HEAVY-DUTY 4 GAL STACKED TANK
CONTRACTOR AIR COMPRESSOR
83 dB(A)*
NOISE RATING
1.1
RUNNING HP
1 Oil lubricated pump with cast iron cylinders
4.0
GALLONS
2 Dual soft start valves assist in cold weather start up
4.0
SCFM@90PSI
3 Site glass & dip stick for easy check of oil level
4 Ball drain valve for quick and thorough tank draining
125
provides over 1500 hours running life
MAX PSI
*Tested Per ISO3744
5 High flow regulator for maximum performance and
Universal push-to-connect coupler
MANUFACTURING QUALITY AIR COMPRESSORS SINCE 1957
MODEL #: E810-4V
FRAMING
SIDING
STAPLING SYSTEMS
LIGHTWEIGHT, WELL BALANCED
CONSISTENT DEPTH OF DRIVE
HIGH LOAD COIL CAPACITY
300 NAILS/ COIL
NO FLAG PLASTIC
COLLATION
DF225C COIL SIDING NAILER
DF150S-TC TICO NAILER
HT-550 CLASSIC HAMMER TACKER
DF350S 20º ROUND HEAD FRAMING NAILER
CS-5000 COMPRESSION STAPLER
20º CORDLESS FRAMING NAILER
3X FASTER
DURABLE
PROBING TIP
COMPACT 1-STRIP
MAGAZINE
CONVENIENT 1,000 COUNT BOX
Contact your local sales representative to obtain a discount on your first order.
For additional information on our products visit: www.duo-fastconstruction.com
HB220 stair/sign ad.indd 1
4/12/11 7:26 AM
Drive
P13.indd 1
Subflooring
Decking & Docks
Fiber Cement
Drywall
Steel Framing
Roofing Tile
4/12/11 7:28 AM
BATTLE-TESTED
Contractor tough? There’s only
one way to find out. Get it dirty,
run it hot, and don’t let up—just
like a contractor. That’s how
they’re used, so that’s how they’re
tested. Engines, pumps, motors,
switches—every component of
every Rolair compressor—is battletested both in the field and
at our Wisconsin factory.
You have the guarantee
that your Rolair
compressor is ready
to roll on day one,
no excuses.
SINCE 1959 OUR SOLE
FOCUS IS COMPRESSORS
There’s only one reason Rolair compressors
are as tough as the men who use them. Our
entire focus is on manufacturing best-of-breed
professional grade compressors. Nothing else.
It began with that simple philosophy in 1959,
and a half century later, it remains the same.
STAINLESS
STRUCTURAL
S
P
O
T
N
A
I
L
S
FLOORING
WS4840W2
FS7550
CAPPING
TCS6832
TACKING
85000
BS5016AF
PINNING
SP2340
S
P
O
T
N
A
I
L
S
Why LINC Systems?
• We distribute all major brands of pneumatic fasteners, tools and
compressors
• We distribute our own brand of collated pneumatic fasteners -Air Drive
• We distribute a complete line of color-coded packaged nails and screws
in plastic tubs -Pro Drive
• We offer a fully private label program for our Air Drive and Pro Drive
product lines
• We support all your merchandising and marketing needs to obtain the
highest turns
• Top 100 items will ship same day when order is received by 2 pm EST
• World class service program to support your customers
• Unparalleled sales and service support in the field to manage your
fastening business
• We are a character driven culture-“How we get there is as important as
where we goˮ
“At LINC Systems, it is our mission
to dream big and deliver beyond all
of our customer's expectations.ˮ
Industrial Fastening Solutions

LINC Catalog - Linc Systems

Transcription

Similar documents

Catálogo - COLOR CUBE

Delran Twp. New Jersey - Rose Colored Graphics Home

HighEnd Workshop - Lautsprecher