highperformanceseries

Transcription

2006
index
15
12
6
12
11
2
60
amplifiers
woofers
enclosures
component kits
coaxials
source units
accessories
Amplifiers: DAA series
page 4
Amplifiers: DAA series
page 6
Amplifiers: DAB series
page 8
DVC woofers: DWC series
page 10
DVC woofers: DWH series
page 12
SVC woofers: DWE series
page 13
SVC woofers: DWB series
page 14
Tweeters & Midrange
page 15
Woofers Enclosures
page 16
Component Systems: DCC series
page 18
Component Systems: DSK series
page 20
Component Systems: DSX series
page 21
Component Systems: DS series
page 22
Component Systems: DSE series
page 23
Coaxials: DC series
page 24
Coaxials: DCM series
page 24
Coaxials: DCE series
page 25
Head Units
page 26
Accessories “the power inside”
2006
• distribution blocks
page 27
• power capacitors
page 27
• power & ground wires page 28
• speaker wires page 28
• signal cables
page 28
• install kits page 29
• battery terminals page 29
• terminals & connectors, fuses
page 29
“the Dragster Crew”
page 30
Technical data
page 30
D
ragster was created for those who have a genuine passion for music in the car. Music than can be listened to at realistic levels and
with a quality of reproduction that does full justice to the concert stage. From crystal clear highs to the deepest lows, at any volume level and with no distortion. Accurate and realistic performance of all
types of music. From the beginning, Dragster was engineered as high
end car audio components that will be considered
“future products” from many decades to come. Using both established and revolutionary technologies
to deliver an exceptional combination of performance
and value. Dragster circuit designs and topology were
specifically created for maximum flexibility, giving owners the option to expand and re-configure their
systems should they decide to change automobiles or
upgrade their car audio system.
In developing the line we worked with engineers, installers and auto manufacturers, testing and refining
our products in the most rigorous and demanding environmental conditions. From the development of
improved production techniques, every effort was
made to achieve the ultimate combination of
unparalleled reliability and relentless performance.
We combined Italian inspiration and flair with
advanced technology and the magical result was
Dragster. Already we are exporting our car audio
line to four continents and today Dragster is
distributed over the world.
We have won justly deserved and accolades from
specialists in many European countries. In car audio
shows and fairs all over Europe, in the installation
bays of the best dealers, Dragster has quickly won
universal recognition.
The European press have tested Dragster amps and
speakers with successful results, acknowledging their
superior class and fantastic performances.
Now we can say that Dragster has won the
recognition and success that it deserves.
Dragster chooses only specialized technical dealers
who are professionals in their field and recognize
quality and performance when they test and evaluate
product. They will happy to demonstrate the advanced
and unique features offered by Dragster and let you
experience the thrill and excitement of truly
exceptional car audio.
amplifiers
Like the legendary marques
of Italian motosport,
Dragster amplifiers are born
of a consuming passion for
performance. Stunning sound
quality, dramatic good looks,
efficient and easy installation
and rugged reliability, long after
the warranty has expired.
These are the Total Quality
Performance standards Dragster engineers set out to achieve
with every amplifier. The new DAA series is set to lead the scene on 2006/07 world
market. Stunning sound quality, dramatic good looks, efficient
and easy installation and rugged reliability, long after the warranty
has expired. These are the total quality performance standards
Dragster engineers set out to achieve with every amplifier.
And what about the huge digital power indicator and the remote sub
level control on all the models? Step ahead!
DAA
h i g h
l i g h t s
- Mosfet power supply
- Full electronic x-over, phase
adjustment
- Sub level remote control
- Double layer PCB,
SMD components
- High efficiency Class D
output stage
- High End insulated RCA
connectors
- 100% aluminium frame
- Real time power display
1
DAA 1501 - 1 channel 1500W total RMS power
650 Watt RMS x 1-ch@4 Ohm, 950W RMS x 1-ch@2 Ohm,
1500 Watt RMS x 1-ch@4 Ohm, variable crossover 30~300 Hz LP.
D class with a great efficiency and lower power consumption.
A good choice for your SPL goal, as well as for a great bass
system. Bridgeable by 2, remote sub level control, power display.
compe tition
series
950 Watt RMS x 1-ch@4 Ohm, 1450W RMS x 1-ch@2 Ohm,
2200 Watt RMS x 1-ch@1 Ohm, variable crossover 30~300 Hz LP.
Dragster masterpiece in D class delivers ton of power ready to compete
in SPL at highest class. You only need the DWC woofers to match at the top.
Of course bridgeable x 2, remote sub level control, phase shift control. Here
also the digital power display on the top.
channel
amplifiers
h i g h
l i g h t s
- Mosfet power supply
- Full electronic x-over, bandpass
function
- Sub level remote control
- Double layer PCB,
SMD components
- High current Mosfet output stage
- High End insulated RCA
connectors
- 100% aluminium frame
- Real time power display
DAA
c o m p e t i t i o n
s e r i e s
140W RMS x 2-ch@4 Ohm, 200W RMS x 2-ch@2 Ohm,
400W RMS x 1-ch@4 Ohm bridged,
variable crossover 50~5000 Hz LP, 10~5000 HP.
Do you crave power and mind-blowing sensation?
The new DAA1402 punches out 200 Watt on each of its 2 channels
effortlessly driving almost every system of speaker at a cost which is
easy on your pocket. The active crossover can be used in high-pass
to protect small drivers from excessive overheating.
2
channel
variable crossover 50~5000 Hz LP, 10~5000 HP.
Here’s how to top into heady levels of distortion free power!
This amplifier blasts out enough to satisfy even the most exacting of
speakers and can shake the greatest of subwoofers around. With 400 Watt
available at each of its two channels dizzy SPL’s (Sound Pressure Level)
and earth-shattering crescendos and easily reached.
4
240 Watt RMS x-2 ch@4 Ohm bridged,
double variable crossover 50~5000 Hz LP, 10~5000 HP.
The DAA804 get four channels pumping out not less than
1200 Watt RMS on each channel! Think on the savings you’ll make
in terms of space, money and connections not to mention how
much easier it becomes to create a great sound system.
And it includes a perfect system of double crossover you can
regulate by just twisting the button.
c h a n n e l
DAA 1604 - 4 channel 960W total RMS
160W RMS x 4-ch@4 Ohm, 240 Watt RMS x 4-ch@2 Ohm,
double variable crossover 50~5000 Hz LP, 10~5000 HP.
A superb four channel at the incredible power of 200 Watt at each channel.
Here’s your chance to create a sound system of a class which is rarely seen
around. When you catch your first glimpse of this amplifier, 50cm long, dressed
up in silver and RedRubin aluminium, you will be dump-struck with admiration.
But it’s striking appearance is nothing compared to the outstanding features
it embodies and high level of performance it will bring you.
amplifiers
2
channel
DAB
The heatsink and the outer shell of these amplifiers are in two-tone
grey brushed aluminium. They are built to a high quality standard
and these high power amplifiers are surprising for the musical
precision and the power emitted. They are ideal for creating high
emotional impact systems, and also best choice for the demanding
person who wants top performance.
Thanks to the use of materials and technologies that are
normallyreserved for much more expensive products, such as
SMD circuiting, stabilised power supply, total absence of loose
cabling and forced ventilation, the DAB series offers high
performance with an unbeatable quality/price ratio.
The high power models are ideal for driving large subwoofers
and for guaranteeing excellent results in fierce SPL fights.
DAB 2050
1
2 channel 180W total
RMS power
50W RMS x 2-ch@4 Ohm,
variable 50~500 Hz HP/LP crossover,
compact and powerful,
great Dragster entry level.
high performance series
2
h i g h
DAB 2075
RMS power
it powers a full system in tri-channel
mode (stereo plus subwoofer).
3
1
2
3
4
5
6
l i g h t s
- Discrete built-in electronic
crossover
- Finely brushed Aluminium
frame
- Non-soldering low ESR
connections
- MosFET power supply with
big energy storage
- High current bipolar transistors
with indipendent carbon
resistors
- SMD circuit board technology
DAB 2110
RMS power
the right answer for virtually every use.
4
c h a n n e l
DAB 4160
RMS power
double variable 50~500 Hz HP/LP crossover,
for Dragster the logical solution for huge power
and current in a first class sound system.
2/06
DAB 4110
RMS power
no less than 120 watts in each channel,
for a great sound system.
4
DAB 4075
DAB 2160
RMS power
it blasts volume out of any speakers
system at the top level.
RMS power
it punches out enough power to make
any system high on dynamism.
6
5
DAB 4050
DAB 2200
RMS power
340W RMS x 2ch@2 Ohm
new from 2006, the most powerful
of the series in 2-ch.
5
RMS power
compact and powerful, the first choice in
Dragster 4 channels.
speakers
woofers
The most advanced and complete
speaker line for Car Audio.
Our products are engineered
for pure musical pleasure.
Dragster loudspeakers offer
great performances in any type
of installation.
These are super woofers that generate very high sound pressure levels and guarantee the best performance
for SPL competitions. They are a perfect choice also for lovers of the extreme reproduction of low
frequencies. The combination of a powerful magnetic motor and a limited weight mobile mass makes to
the cone an exceptional acceleration, over 80g.
The brass voice coil former with high thermal dissipation and anti-shock device guarantee maximum
reliability in the most severe conditions. The electro-mechanical parameters are ideal for working in limited
volume box reflex and help to reach record SPL.
DWC
DWC 228
ex t re m e
300mm or 12”, 2+2 Ohm
1000W RMS, 2000W peak.
SPL 4 sec. peak power 3500W
s e r i e s
1
DWC 258
380mm or 15”, 2+2 Ohm
SPL 4 sec. peak power 4000 W
5
6
4
10
2
3
2
h i g h
1
2
3
4
5
6
l i g h t s
- V-Styrofoam extreme excursion
surround
- Huge cone excursion due to
high spacers
- Heat cooling voice coil vents
- 9 inch diameter triple magnet
- Heavy duty double spider
- 25mm thick steel front plate
11
woofers
h i g h
1
2
3
4
5
DWE 126
DWE 106
These High End subwoofers are ideal for those people who want faithful
reproduction of low frequencies together with a high sound pressure
level. The new design of the magnetic unit and the use of new, lighter
materials for mobile masses (honeycomb cones) and surrounds provide
for the high level performance that can be obtained.
The new voice coil that comes from the DWC models allows
the subwoofers to be used safely in the most extreme situations.
The new parameters make these loudspeakers suitable for all types
of loading and also for SPL use.
- Chrome professional connectors
- Low noise heat cooling
voice coil vents
- Honeycomb high damped cone
- Aluminium die cast basket
- Anti-shock brass 3 inch
double voice coil.
Huge magnet with chrome
plates
3
competition
series
5
4
4
3
h i g h
250 mm or 10”, 2+2 Ohm,
400W RMS, 800W peak
12
DWE
5
2
DWH 209
380mm or 15”, 4 Ohm
l i g h t s
1
DWH
DWE 156
300mm or 12”, 4 Ohm
250mm or 10”, 4 Ohm
te c h
2
s e r i e s
DWH 229
300 mm or 12”, 2+2 Ohm,
600W RMS, 1200W peak
h i g h
DWH 259
380 mm or 15”, 2+2 Ohm,
800W RMS, 1600W peak
1
2
3
4
5
l i g h t s
1
- Double layer foam laminated
surround
- Frame venting for voice coil heating
- Long life voice coil leads
- Deep back plate for high
escursion cone
- High quality push connectors
This well-known series of Dragster loudspeakers comes from a winning
idea, that of joining powerful magnetic motors with heavy, damped cones,
in order to permit the reproduction of deep, non-distorted low frequencies
in small loads. These special parameters make it possible to use them in
sealed boxes, obtaining a fast, damped reproduction and also in vented
boxes for maximum SPL performance.
The polypropylene cone, the double layer high excursion, Styrofoam
surround, the voice coil former in Kapton and the die-cast aluminium,
scratchproof, aerodynamic basket make these subwoofers, ideal for most
applications. In particular, the DWE have won the praise of the specialised
press for their excellent performance in their category.
13
woofers
DWB
The subwoofers in the DWB series guarantee high quality performance and
sound pressure, setting new price/quality levels.
The special solutions used, such as powerful magnets, thin air gap and light
polypropylene cones provide for an increase in sensitivity, precious dB, that
allow higher volumes using the same amount of power.
The components used also belong to other, higher classes: large Styrofoam
surrounds, back plates shaped for high excursions, super-damped enamel
baskets, Kapton voice coil formers and Nomex spiders. The electro-mechanical
parameters allow the subwoofers to be used in the most varied configurations.
AluMylar dome with Trivent rear chamber, Neodymium magnet,
aluminium former, ferrofluid, non-loading baffle, phase ring,
Dragster competition high-end tweeter.
h i g h
DTH 121
DWB 85
200mm or 8”, 4 Ohm,
100W RMS, 200W peak
1
2
3
4
5
l i g h t s
- Polypropylene cone
- Styrofoam big escursion
surround
- Progressive flat nomex spider
- Highly damped steel chassis
- Huge vented magnetic motor
1
DWB 105
250mm or 10”, 4 Ohm,
125W RMS, 250W peak
2
DWB 125
300mm or 12”, 4 Ohm,
150W RMS, 300W peak
4
tweeters & midrange
h i g h
19mm or 3/4”, 80W RMS, 160W peak with
proper crossover, frequency range from 1.8 to
25 kHz, sensitivity 91dB. Included in the series
DCC 582, DS, DSE, DC.
1
2
3
4
5
-
l i g h t s
AluMylar dome
High frequency phase ring
Trivent rear chamber
50mm silk dome
Non-loading baffle
2
1
DTH 125
25mm or 1”, 120W RMS, 240W peak with proper
crossover, frequency range from 1.2 to 24 kHz,
sensitivity 91dB. Included in the series DCC682, DSK
and DSX.
5
3
5
DMD 100
A dome midrange to complete a 3-way speaker
system 50mm or 2” voice coil, silk dome
impregnated with epoxy resin, Neodymium magnet
with ferrofluid injected in-depth, KaptonTM former,
“Star” profile multiple magnet, resonant back
chamber, power 120W RMS and 300W peak with
proper crossover, frequency range 450/6500 Hz,
sensitivity 90dB.
3
2
5
4
DWB 155
380mm or 15”, 4 Ohm,
250W RMS, 500W peak
14
15
DER
enclosures
The woofer enclosures are today the modern
solution to get bass sounds immediately without
complicated and expensive structures.
The ones offered by Dragster produce distortion-free
sound pressure level with deep, damped
reproduction of low frequencies, ideal for
completing any in-car audio system.
Available in three common configurations,
sealed (DEE series), vented (DER series)
and bandpass (DEH series) enclosures, they use
the characteristics of the loudspeakers used
to the best advantage, providing a valid,
fast alternative to the use of loose woofers.
5
h i g h
1
2
3
4
5
-
DEH
l i g h t s
300W dedicated driver
High excursion design surround
High flows triangular ports
Heavy duty carpet
3/4" thick MDF wood cabinet
4
DEH 221
6th order vented subwoofer system,
single 300mm or 12” woofer with 300W RMS,
600W peak, finished in Dragster style with
high flow Triangular ports.
Dimensions (WxHxD): 480mm (19”) x 380mm (15”)
x 440mm (17-1/2”)
1
h i g h
1
2
3
4
5
l i g h t s
-
Heavy cone for sealed box
Protection steel bars
3/4 inch thick MDF wood
cabinet
- High power subwoofer driver
2
DEE
3
6
3
2
DEE 101
5
2
1
Sealed subwoofer system, single
250mm or 10” woofer with 150W RMS,
300W peak, finished in Dragster style
with red front face.
Dimensions (WxHxD) : 400mm (15-3/4”)
x 320mm (12-3/4”) x 270mm (10-3/4”)
h i g h
1
1
2
3
4
5
6
4
3
4
DEE 121
Sealed subwoofer system, single 300mm
or 12” woofer with 250W RMS,
500W peak, finished in Dragster style
with red front face.
Dimensions (WxHxD) : 450mm (17-3/4”)
x 370mm (14-3/4”) x 315mm (12-5/8”)
16
4th order bandpass subwoofer system,
600W peak, finished in Dragster style with red
upper face, transparent window and high flow
TriAngular ports. Dimensions (WxHxD) :
480mm (19”) x 380mm (15”) x 440mm (17-1/2”)
DER 321
-
DEH 251
545mm (21-1/2”) x 450mm (17-3/4”) x 480mm (19”)
l i g h t s
Shiny plexiglass wall
DEH dedicated drivers
4th order bandpass loading
High flow vents = huge SPL
3/4" thick MDF wood cabinet
DEH 222
5
double 300mm or 12” woofer with 600W RMS,
873mm (34-3/8”) x 410mm (16-1/8”) x 490mm (19-1/2”)
17
systems
These two-way kits are the top Dragster technological
expression in multi-way systems for the medium-high
frequencies.
They have been largely renewed compared to the previous DSC
versions, and are made up of midbasses with fiberglass cone
and a particular high-dispersion, cone-shaped phase-plug
and the Extreme Series tweeter DTH125 in AluMylar.
The kit is completed by a new passive filter with metallized
polypropylene capacitors and air wound inductances that
equalises and directs the two drivers for the reproduction
of dynamic, transparent sound. This is the perfect choice for
the modern user and for quality sound competitions.
In this new version you can install the tweeter as coaxial
mode, saving space and time of installation, having a
great result.
The kits also include grilles
and components for installation.
5
4
3
h i g h
1
2
3
4
5
6
1
l i g h t s
- Chrome back plate
- DiamondCut aluminium basket
- Separate component mode
with phase plug
- Light exponential fiberglass
cone
- Santoprene low distorsion
surround
- Coaxial mode with tweeter
6
2
DCC
h i g h
te c h
s e r i e s
c o a x i a l
o r
s e p a r a te
c o mponent
DCC 682
2-way 165mm or 6.5”,
90W RMS, 180W peak.
18
mode
DCC 582
2-way 130mm or 5.25”,
70W RMS, 140W peak.
19
systems
h i g h
1
2
3
4
l i g h t s
- Graphite charged PP cone
- Santoprene™ low distorsion
surround
- 2" Aluminium voice coil
- Nomex red spider
The two-way DSK systems are the expression of a project where power and quality
are in pole position.
The mobile aluminium 50mm (2”) voice coil, the large, ultra-straight
magnetic circuit and the hard polypropylene cone loaded with graphite make musical
reproduction extremely accurate and also provide a maximum SPL that is typical of
much larger loudspeakers. The unusual ability to reproduce low frequencies allows
the musical signal to be reproduced in an exceptionally realistic way, with high emotional
impact. The best choice for car hi-fi competitions and for anyone who wants sound at
high volume while maintaining excellent quality.
The kit includes the Extreme Series tweeter DTH 125, a High End linear phase passive filter,
grilles and assembly components.
DSK
1
competition series
6
5
4
h i g h
1
2
3
4
5
6
-
l i g h t s
Kevlar™ midbass cone
Fiberglass composite basket
Low profile neodimium magnet
Low tolerance ceramic resistors
Air wound inductances
Metallized polypropylene
capacitors
2
1
Due to the reduced installation depth and
minimum weight, these high quality two-way
kits solve all installation problems without
having to give up on any sound quality.
The woofer’s special magnetic circuit made
entirely in neodymium ensures the same
general performance as the traditional ones
made in ferrite and greater linearity in
the magnetic field.
The new AluMylar tweeter DTH125 from the
Extreme Series and a passive filter with high
quality components especially for this series
increase the systems’ value, which is already
well-known and appreciated.
Grilles and installation components
are included.
3
2
DSK 572
2-way 130mm or 5.25”,
DSX
x-neo
3
series
4
DSK 672
2-way 165mm or 6.5”,
20
DSX 452 2-way 100mm or 4”, 50W RMS, 100W peak.
DSX 552
2-way 130mm or 5.25”, 50W RMS, 100W peak.
DSX 652
21
systems
These two-way loudspeaker systems use Dragster technological expertise from
the High End lines, offering extremely high sound quality at reasonable prices,
therefore providing an ideal choice for anyone who wants to build a high performance
system without the commitment and cost of higher level products.
The graphite-fibre injected polypropylene cones and the new DTH 121 AluMylar tweeter
dome provide for a medium-high faithful, transparent range.
The midwoofer’s special parameters guarantee a fast, dynamic mid-bass range.
The kit includes 12 dB/oct crossovers filter with level adjustment for
the tweeters, grilles and installation components.
h i g h
1
2
3
4
3
l i g h t s
- New carbon injected cone with
a smart new white/red logo
- Conical shape phase plug
- Santoprene™ surround
- Linear Nomex red spider
1
h i g h
1
2
3
DSE
3
2
DS
high
p e r fo r m a n c e
l i g h t s
- AluMylar exponential cone
with new white/red logo
- New dust cap for better
mid frequencies response
- New custom grilles on
all the series
classic
4
s e r i e s
2-way 100mm or 4”, 40W RMS, 80W peak.
22
DS 532
2
series
DSE 562
DS 432
1
DS 632
DSE 662
The two-way DSE systems provide the possibility of fitting
loudspeakers into a car that does not have any or of replacing
the standard ones. For a small cost, the user manages to obtain
a sound that is typical of Dragster.
The component materials used, similar to the higher level series,
such as the AluMylar cone and the new tweeter DTH 121 make sound
reproduction accurate and enjoyable, that can involve even the most
distracted listener. The high efficiency allows full use even
with just an amplified car radio.
The kit includes passive filters, new custom grilles and installation
components.
23
coaxials
DC
1
2
DC 402
Full range 100mm or 4”, 35W RMS, 100W peak.
DCE 612
Full range 165mm or 6.5”, 40W RMS, 90W peak.
h i g h
4
1
2
3
4
3
DC 502
DC 602
This series of coaxials, which
improves year by year, is one of
the most popular on the market, and
is close to perfection. The optimal choice
for those who want top performance
from two-way loud speakers in coaxial
configuration. Each item, made up of
two precious drivers designed to be used
separately and then mounted coaxially,
(or tri-axially for the three-way DC 903),
accurately reproduces the musical sounds.
Although they are suitable for working with
amplified car radios, the speakers reach maximum
performance when connected to separate amplifiers.
The kit includes metal grilles and installation
components.
DCM
marine series
DCE 914
Full range four way 150x230mm or 6”x9”,
50W RMS, 120W peak.
Much appreciated for their sound
quality and reliability, the DCE series
coaxials are the right choice for
anyone who wants to install an
integrated system without foregoing
Dragster sound quality, while not
spending too much.
The mylar tweeters and the
polypropylene cones come directly
from the high quality multi-way
systems on which Dragster has
built its own reputation.
Except for DCE462 and 572,
all the kits include the new
custom grilles and
installation accessories.
1
2
3
4
24
DCE 412 Full range 100mm or 4”, 20W RMS, 60W peak.
- New AluMylar diaphgrams
- Santoprene™ surround
- New DTH 121/125 AluMylar
tweeters
- Nomex red spider
h i g h
Full range three way 150x230mm or 6”x9”, 60W RMS, 180W peak.
l i g h t s
Dragster offers a coaxial speaker for outdoor environments
such as boats, porches and all the locations with a high
moisture level. DCM 600 is a 150mm or 6” full range
coaxial speaker built with material capable of withstanding
and reproducing sound in very damp environments, built
without parts that will deteriorate in the above conditions.
DC 903
DCE 512
-
DCE 572
Full range 130x180mm or 5”x7”,
40W RMS, 90W peak.
DCE 462
DCE
Full range 100x150mm or 4”x6”,
30W RMS, 75W peak
classic
series
1
2
l i g h t s
Polypropylene cones
High excursion foam surround
Mylar dome pair of tweeters
New custom grille
4
3
DCM 600
full range 150 mm or 6”, 50W RMS, 125W peak.
25
h i g h
1
2
3
4
5
accessories
head units
l i g h t s
-
Digital encoder volume control
High power outputs (50Wx4)
RDS EON function
Fully detachable 3 color
LCD panel
- DSP sound processing
DHU 055.R
AM/FM/CD/MP3 RECEIVER
Playback Section
CD-R/RW compatible, MP3 encoded CD-R/CD-RW, playback, supports constant bit rate 8~320kbps,
supports variable bit rate MP3 files management, 16bit 8x DA converters, anti-shock mechanism,
high-speed audible track search, direct track access, random/scan/repeat/intro/pause, power-off CD eject.
2
Tuner Section
RDS-EON functions, 18 FM preset stations, 12 AM preset stations, preset scan, one-touch memory, last
position memory, auto stereo/mono, auto local/distance, manual tuning, seek, scan.
Audio Section
200W, 4-ch x 50W, 2 pr RCA 4V pre-out, subwoofer RCA LP 60Hz 4V pre-out, 1 pr RCA AUX input, DSP
sound processing with 4 sound fields, digital rotary encoder volume, bass, treble, balance, fader control,
loudness function, muting function, phone mute.
1
3
General
1.0 DIN, ISO-DIN connector, LCD 3-color display Black Masking, flipdown detachable front faceplate with
hard carry case, Infrared Remote control. Graphite faceplate.
distribution blocks
DP 732
AGU DIGITAL DISPLAY Distribution
Block Platinum Plated,
input 3x35/20mmq or 2/4 AWG,
output 4x8mmq or 8 AWG
DP 733
AGU Positive & Negative
Distribution Block Platinum Plated,
input 2+2x20mmq or 4 AWG,
output 4+4x8mmq or 8 AWG.
4
DHU 051.R
AM/FM/CD RECEIVER
Playback Section
capacitors
DP 738
ANL Fuse Block Platinum Plated,
DIGITAL DISPLAY, input and output
1x48/20mmq or 0/4 AWG.
CD-R/RW compatible, 16bit 8x DA converters, CD changer control, anti-shock mechanism, high-speed
audible track search, direct track access, random/scan/repeat/intro/pause power-off CD eject.
Tuner Section
RDS-EON functions, 18 FM preset stations, 12 AM preset stations, preset scan, one-touch memory, last
position memory, auto stereo/mono, auto local/distance, manual tuning, seek, scan.
Audio Section
200W, 4-ch x 50W, 2 pr RCA 4V pre-out, subwoofer RCA LP 60Hz 4V pre-out, 1 pr RCA AUX input, DSP
sound processing with 4 sound fields, digital rotary encoder volume, bass, treble, balance, fader control,
loudness function, muting function, phone mute.
General
5
26
1.0 DIN, ISO-DIN connector, LCD 3-color display Black Masking, flipdown detachable front faceplate with
hard carry case, Silver faceplate.
DP 735
Distribution Block Platinum Plated,
input 1x20mmq or 4 AWG,
output 4x8mmq or 8 AWG.
DP 740
AGU Fuseholder Platinum Plated,
input and output 20/8mmq or
4/8 AWG.
DP 703
The attractive
transparent cover of
this power capacitor
shelters a digital
voltmeter and four ring
terminals which are
supplied with the
product.
20-24 Volt surge.
DP 702
Performance at 1 Farad
and safety at the top
level in Dragster’s entry
level with voltage digital
control too.
16-20 Volt surge.
27
accessories
power & ground wires
install kits
All Dragster wires are encased in virgin dielectric jackets resistant to gasoline and
chemical. These power and ground wires are made in specially twisted bundles
that ensure huge current delivery to your audio system.
DP KIT.4
Competition install kit with 20mmq or
4 AWG power & ground wire including:
DP 404.R 6 meter with ring terminal
DP 404.C 1.5 meter with ring terminal
DP 465.R 1 pr
DP 425.R 12 meter
DP 753 1 pr
DP 751 1 pr
DP 740 AGU fuseholder + fuse
power & ground wire 35mmq or 2 AWG,
tinned copper, spool 20m or 67 feet
DP 402.B Flexible wire in Blue Jacket
DP 402.C Flexible wire in Clear Jacket
DP 402.R Flexible wire in Red Jacket
connectors and cable ties
DP KIT.8
High Performace install kit with 8mmq or
8 AWG spower & ground wire including:
DP 408.R 6 meter with ring terminal
DP 408.C 1.5 meter with ring terminal
DP 455.B 1 pr
DP 415.B 12 meter
DP 752 1 pr
DP 749 1 pr
DP 740 AGU fuseholder + fuse
speakers wires
Top grade speaker cable that is available in the three most common sizes.
Suitable for every speaker application.
connectors and cable ties
speaker wire 4mmq or 12 AWG, spool 75m or 250 feet
speaker wire 2.5mmq or 14 AWG, spool 100m or 330 feet
Speaker wire 1.5mmq or 16 AWG, spool 150m or 500 feet
battery terminals
signal cables
The importance of using top quality interconnections in any audio or video system
cannot be underlined enough. The purity of a signal must be retained along its
path to ensure extraneous and other noises are not amplified along with the
original signal. This requires that the material and manufacturing be of the highest
standard. Dragster follows this concept for the best in sound quality.
Competition Series
Double shield, platinum plug DP 711, RED jacket, remote wire included.
DP 461.R
1m or 3 feet
DP 463.R 3m or 10 feet
DP 468.R Y adapter 1 male to 2 female
DP 469.R Y adapter 1 female to 2 male
DP 722
Battery Positive Terminal with Negative adaptor,
platinum plated, 1x35mmq or 2 AWG and
2x8mmq or 8 AWG outputs, includes plastic cover.
DP 724
Battery Positive Terminal with Negative
adaptor, platinum plated, 1x35 mmq or
2 AWG, and 1x4mmq or 4 AWG outputs and
2x8mmq or 8 AWG, includes plastic cover.
DP 726
Pair of Positive and Negative Battery Terminals,
platinum plated, DIGITAL DISPLAY showing the battery
voltage, 1x35mmq or 2 AWG and 2x8mmq or
8 AWG outputs, includes plastic cover.
connectors & fuses
High Performance Series
Double shield, ABS plug, CLEAR jacket, remote wire included.
DP 471.C
1m or 3 feet
DP 473.C
3m or 10 feet
DP 475.C
5m or 16 feet
DP 476.C
6m or 20 feet
DP 478.C
Y adapter 1 male to 2 female
DP 479.C
Y adapter 1 female to 2 male
Classic Series
28
Twisted pair, ABS plug, BLUE jacket, remote wire included.
DP 451.B
1m or 3 feet
DP 453.B 3m or 10 feet
DP 455.BK 5m or 16 feet, 25 pairs
DP 458.B Y adapter 1 male to 2 female
DP 459.B Y adapter 1 female to 2 male
DP 711
(4) RCA Platinum
Plated Plug
DP 749
(4) Gold Plated Ring
Terminal 8mmq or 8 AWG
– 2 pairs
DP 750
Terminal 8mmq or 8 AWG
– 25 pairs in bulk
DP 751
Terminal 20mmq
or 4 AWG – 2 pairs
DP 752
(50) Gold Plated Spades
8mmq or 8 AWG
– 25 pairs in bulk
DP 753
(4) Gold Plated Spades
4mmq or 4 AWG – 2 pairs
DP 773-774-775-776
777-778
AGU Fuses rated at
30, 40, 50, 60, 70, 80
Amps value.
5 pcs in one blister.
DP 781.0-781.5
782.0
ANL Fuse rated at 100,
150, 200 Amps value.
1 pc each blister.
29
d rag ster
crew
specs
DAA1402
140x2
200x2
-
400x1
0.04
5-100k
>103
0.12-12
28
30
10-5000
30-5000
12
0-18dB 10Hz- HP filter
YES
280x60x300
11x2-1/3x12
3.5
DAB 2050
50x2
90x2
160x1
0.07
20-50k
>100
0.2-6
12
15
10-400
40-400
12
232x56x259
9x2-1/5x10-1/5
1.8
DWB 85
200 (8”)
106 (4-1/6)
100
200
4
38 (1-1/2”)
92
42
3.5
7.6
0.4
0.38
24 (170)
±4.5 (1/6”)
20 (0.7)
12 (4-3/4)
5.2 (2”)
11 (0.4)
DEE 101
1x25 (10”)
DWE 106
150
300
4
38
400x320x270
15-2/4x12x10-3/4
DAA2802
280x2
400x2
-
800x1
0.04
5-100k
>103
0.12-12
48
50
10-5000
30-5000
12
YES
320x60x300
12-2/3x2-1/3x12
5.3
DAB 2075
75x2
130x2
250x1
0.07
20-50k
>100
0.2-6
16
20
10-400
40-400
12
266x56x259
10-1/5x2-1/5x10
2
DWB 105
250 (10”)
125 (4-8/9)
125
250
4
38 (1-1/2”)
92
37
3.8
9.2
0.58
0.55
55 (213)
±6 (1/4”)
35 (1.2)
21 (8)
7.6 (3”)
29 (1)
DEE 121
1x30 (12”)
DWE 126
250
500
4
32
450x370x315
18x15x12
DAA804
80x4
120x4
-
240x2
0.04
5-100k
>100
0.12-12
30
35
10-5000 double
30-5000 double
12
0-18dB double
10Hz- HP filter
rear channels
330x60x300
13x2-1/3x12
4
DAB 2110
120x2
180x2
350x1
0.07
20-50k
>100
0.2-6
20
25
1 fan
10-400
40-400
12
0-18dB
10Hz- HP filter
295x56x259
11-5/9x2-1/5x10
2.2
DWB 125
300 (12”)
151 (6)
150
300
4
38 (1-1/2”)
93.1
31
3.3
11
0.59
0.56
108 (264)
±7 (2/7”)
50 (1.7)
34 (13-2/5)
10 (4”)
43 (1.5)
DAA1604
160x4
240x4
-
480x2
0.04
5-100k
>100
0.12-12
50
60
10-5000 double
30-5000 double
12
0-18dB double
10Hz- HP filter
rear channels
540x60x300
19x2-1/3x12
6
DAB 2160
160x2
300x2
550x1
0.07
20-50k
>100
0.2-6
35
40
2 fans
10-400
40-400
12
0-18dB
10Hz- HP filter
500x56x259
20x2-1/5x10
5.1
DAA1501
DAA2201
650x1
950x1
950x1
1450x1
1500x1
2200x1
Two amplifiers bridgeable
0.1
0.1
5-300
5-300
>106
>108
0.12-12
0.12-12
62
94
70
100
none
none
30-300
30-300
12
12
0-18dB 0-18dB 10-50Hz
10-50Hz
YES
YES
320x60x300
480x60x300
12-2/3x2-1/3x12
19x2-1/3x12
6.5
8
DAB 2200
DAB 4050
200x2
50x4
340x2
90x4
690x1
160x2
0.07
0.08
20-50k
20-50k
>100
>100
0.2-6
0.2-6
38
20
45
25
2 fans
1 fan
10-400
10-400 double
40-400
40-400 double
12
12
0-18dB 0-18dB double
10Hz- HP filter
10Hz- HP filter
500x56x259
332x56x259
20x2-1/5x10
10-1/3x2-1/5x10.2
5.3
2.5
DAB 4075
75x4
135x4
220x2
0.08
20-50k
>100
0.2-6
30
30
1 fan
10-400 double
40-400 double
12
0-18dB double
10Hz- HP filter
373x56x259
14-3/5x2-1/5x10
3
DAB 4110
120x4
200x4
280x2
0:08
20-50k
>100
0.2-6
36
40
2 fans
10-400 double
40-400 double
12
0-18dB double
10Hz- HP filter
402x56x259
15-2/3x2-1/5x10
3.7
DAB 4160
160x4
300x4
500x2
0.08
20-50k
>100
0.2-6
60
80
2 fans
10-400 double
40-400 double
12
0-18dB double
10Hz- HP filter
650x56x259
25-2/3x2-1/5x10
6.2
DWB 155
380 (15”)
188 (7-2/5)
250
500
4
50 (2”)
94.3
26
3.9
10.6
0.47
0.45
221 (325)
±7 (2/7”)
65 (2.3)
37 (14-3/5)
2x7.6 (2x3”)
55 (1.9)
DWE 106
250 (10”)
115 (4-1/2)
200
450
4
50 (2”)
89.8
29
3.7
10.7
0.39
0.38
46 (212)
±8.5 (1/3”)
24 (0.8)
31 (12)
7.6 (3”)
15 (0.5)
DWE 126
300 (12”)
126 (5)
300
600
4
50 (2”)
93
22
3.1
8.7
0.3
0.29
143 (250)
±8.5 (1/3”)
38 (1.3)
38 (15)
10 (4”)
24 (0.8)
DWE 156
380 (15”)
166 (6-1/2)
400
1000
4
65 (2-1/2”)
93.2
21
4
16.3
0.32
0.31
211 (311)
±8.5 (1/3”)
56 (2)
2 x 35 (13-1/2)
2x7.6 (2x3”)
41 (1.4)
DWH 209
250 (10”)
147 (5-4/5”)
200+200
400+400
2+2
75 (3)
88
35.7
3.4
10.2
0.62
0.58
22 (210)
±7 (2/7”)
30 (1.1)
32 (12-1/4”)
7.6 (3”)
13(5”)/11(4-1/3”)
25 (0.9)
DWH 229
300 (12”)
163 (6-2/5”)
300+300
600+600
2+2
75 (3)
90.5
30
3.4
3.8
0.41
0.37
50 (256)
±8.5 (4/13”)
37 (1.3)
38 (15”)
10 (4”)
15(6”)/13(5”)
29 (1)
DER 321
1x30 (12”)
specific
300
600
4
34
480x380x440
19x15x17-1/2
DEH 221
1x30 (12”)
specific
300
600
4
35
480x380x440
19x15x17-1/2
DEH 251
1x38 (15”)
specific
400
800
4
29
545x450x480
21-1/2x18x19
DEH 222
2x30 (12”)
specific
600
1200
4+4
33
873x410x490
35x16x19-1/2
voice coil mounting depth power RMS max power impedance frequency response sensitivity rec. crossover COMPONENT SYSTEMS
DCC582
130 (5.25”)
61 (2-2/5”)
19 (3/4”)
70
140
4
65-25k
91
12/12
0/-3
DCC682
165 (6.5”)
73 (2-8/9”)
25 (1”)
90
180
4
60-24k
91.5
12/12
0/-3
DSK572
130 (5.25”)
71 (2-4/8”)
25 (1”)
140
280
4
55-24k
87.9
0/12
0/-3
DSK672
165 (6.5”)
71 (2-4/8”)
25 (1”)
160
320
4
55-24k
92.2
12/12
0/-3
DSX452
100 (4”)
30 (1-1/6”)
25 (1”)
50
100
4
90-24k
88
12/12
0/-3
DSX552
130 (5.25”)
46 (1-4/5”)
25 (1”)
50
100
4
75~24k
90
12/12
0/-3
COAXIALS
DC402
100 (4”)
46 (1-4/5”)
35
100
4
80-23k
90
DC502
130 (5.25”)
50 (2”)
40
120
4
70-23k
90
DC602
165 (6.5”)
66 (2-3/5”)
50
150
4
50-23k
91
DC903
150x230 (6”x9”)
74 (3”)
60
180
4
50-23k
93
DCE412
100 (4”)
43 (1-3/4)
20
60
4
85-20k
88
DCE512
130 (5.25”)
56 (2-1/3)
30
75
4
70-20k
90
Amps DAA Series
Power @ 4 Ohm (0.05 THD) W RMS
Power @ 4 Ohm bridge (0.08 THD) W RMS
THD @ max power %
Frequency response -3 dB Hz
Signal/noise Weight A dB
Input sensitivity V
Max current drawn (4 Ohm) A
Suggested fuse A
HP crossover frequency Hz
LP crossover frequency Hz
Crossover slope dB/oct.
Bass Boost @45 Hz
Subsonic filter Sub level remote control
Dimensions mm
Dimensions inch
Weight kg
Amps DAB Series
Power @ 4 Ohm bridge (0.05 THD) W RMS
THD @ max power %
Frequency response -3 dB Hz
Signal/noise Weight A dB
Input sensitivity V
Max current drawn (4 Ohm) A
Suggested fuse A
FACT (Forced Air Cooling Technology)
HP crossover frequency Hz
LP/BP crossover frequency Hz
Bass Boost @45 Hz
Subsonic filter Dimensions mm
Dimensions inch
Weight kg
SHIRT.WH
WOOFERS
diameter mm (inch)
mounting depth mm (inch)
RMS power W
max power W
impedance Ohm
voice coil diameter mm (inch)
sensitivity dB 2.83 V@1m
Fs Hz
Re Ohm
Qms Qes Qts Vas (D) Lt(mm)
Xmax mm. (inch)
ported enclosure Internal volume Lt. (cu. feet)
tube lenght cm. (inch)
tube inner diameter cm. (inch)
75 Hz SPL port diameter/lenght cm (inch)
sealed enclosure
Internal volume Lt.(cu. feet)
SHIRT.BK
Woofer Enclosures
Woofer dimension cm (inch)
Woofer model
Continuous Power W
Max Power W
Impedance Ohm
In-trunk low end response Hz @ -3dB
dimensions WxHxD (mm)
dimensions WxHxD (inch)
CAP.R
CAP.X
30
diameter mid-bass mm (inch)
mounting depth midbass mm (inch)
voice coil of tweeter mm (inch)
power RMS W
max power W
impedance Ohm
frequency response Hz
sensitivity dB
tweeter attenuation dB
diameter mm (inch)
mounting depth mm (inch)
power RMS W
max power W
impedance Ohm
frequency response Hz
sensitivity dB
DWH 259
380 (15”)
172 (6-3/4”)
400+400
800+800
2+2
75 (3)
92.6
26
3.6
6.9
0.38
0.36
108 (315)
±8.5 (1/3”)
57 (2)
35 (13-1/2”)
2x7.6 (2x3”)
19 (7-1/2”)/10 (4”)
37 (1.3)
DWC 228
300 (12”)
220 (8-1/2”)
500+500
1000+1000
2+2
75 (3)
91
37
3.6
8
0.41
0.39
26 (255)
±20 (4/5”)
38 (1.4)
37 (14-1/2”)
2x7.6 (2x3”)
17.5 (7”)/16 (6”)
27 (1)
DWC 258
380 (15”)
272 (9”)
600+600
1200+1200
2+2
75 (3)
91.4
30
3.5
6.5
0.53
0.49
75 (320)
±20 (4/5”)
TWEETERS/MIDS
DTH 121
19 (3/4”)
10 (2/5”)
80
150
4
1.8k-25k
91
3.5k
DTH 125
25 (1”)
17 (2/3”)
120
240
4
1.2k-24k
91
2.8k
DMD 100
50 (2”)
35 (1-3/8”)
160
300
4
500-9.5k
92
900 / 6k
DSX652
165 (6.5”)
53 (1-1/10”)
25 (1”)
60
120
4
65-24k
92
0/12
0/-3
DS432
100 (4”)
46 (1-4/5”)
19 (3/4”)
50
100
4
80~21k
90
12/12
0/-3
DS532
130 (5.25”)
46 (1-4/5”)
19 (3/4”)
60
120
4
70-21k
90
12/12
0/-3
DS632
165 (6.5”)
66 (2-3/5”)
19 (3/4”)
75
150
4
50-21k
90
12/12
0/-3
DSE562
130 (5.25”)
56 (2”)
19 (3/4”)
50
100
4
75-21k
90
6
0/-3
DSE662
165 (6.5”)
66 (2-5/8”)
19 (3/4”)
60
120
4
60-21k
90.7
6
0/-3
DCE612
165 (6.5”)
56 (2-1/3)
40
90
4
60-20k
90
DCE462
100 x150 (4”x6”)
48 (1-7/8)
30
75
4
70-20k
90
DCE572
130X180 (5”x7”)
64 (2-1/2)
40
90
4
50-20k
90
DCE914
150x230 (6”x9”)
75 (3)
50
120
4
50-20k
90
DCM600
160 (6-1/3”)
60 (2-3/8)
50
100
4
60-20k
90
mm (inch)
mm (inch)
W
W
Ohm
Hz
dB
Hz
75 (2.8)
42 (17”)
2x10 (2x4”)
23 (9”)/9 (3-1/2”)
45 (1.7)
31
Dragster srl - Milano - Italy
i n f o @ d r a g s t e r a u d i o a r t . c o m w w w. d r a g s t e r a u d i o a r t . c o m

highperformanceseries

Transcription

Similar documents

GO GREEN - CrafTech.com

LAV21 RMS (-T), LAV3 RMS (-T)

ClifDesign manual -CD4800,2800,5CH.cdr

2 x 360 Watts RMS at 4 ohms , 230 V 1`000 VA power supp

WinLink 2

INTEGRATED AMPLIFIER MIMETISM 15.2 2 x 180 Watts RMS at 8

ELITE-15 PF

Paradex brochure