Lathe Parts Catalog - Logan Actuator Co.

Transcription

HOW TO ORDER REPAIR PARTS
Should you need repair parts for your lathe the following information is necessary to fill your order
promptly and correctly.
1.
Complete name and number of the part as listed in the parts list.
2.
Model and Serial Number of your lathe. Serial number is stamped on top of the front way
at the right end of the lathe.
Page - 2
Logan Actuator Co.
550 Chippewa Rd
Harvard, IL 60033
USA
Tel (815) 943-9500
Fax (815) 943-6755
http://www.lathe.com
[email protected]
Secure Online Ordering:
http://store.lathe.com
LP-95
LATHE PARTS CATALOG
The following catalog lists the parts available from this address for the servicing and repair of lathes
previously manufactured by LOGAN ENGINEERING CO. at Chicago, IL, and marketed under the
LOGAN Name and the MONTGOMERY WARDS POWER-KRAFT Line.
All orders should be accompanied by your Lathe Model Number and Serial Number, as well as a daytime
telephone number in case of questions. The Serial Number is a 4 or 5 digit number, possibly followed by
an "A", stamped on the right hand end of the bed, between the V and Flat Ways.
Reprints of the original Logan Lathe Instruction Manuals and Parts Lists with exploded or sectional views
of the various assemblies are also available. Call for specifics, or order online at http://store.lathe.com
Be sure to specify your Lathe Model Number.
The "Logan Lathe Numbers" or “Old Part Number” in the listings are the numbers shown in the Parts
Lists for the particular lathe model being considered.
The "Part Number" is the "LP-" or "Q-" number under which the corresponding part would be stocked
here at LOGAN ACTUATOR CO. Some dimensional data is also listed as a cross check when
determining the "LP-" number.
A few words about Part Numbers:
During the course of over 40 years of production of Logan Lathes, at least 4 different part numbering
schemes were employed. For many reasons, we at Logan Actuator Co. use different Part Numbers than
those used in the past. This Catalog references the original Part Numbers used by Logan Engineering. If
the part number you are looking for is formatted such as 18A-30216, look in this catalog for a reference to
LA-216. If you are still not sure of the cross reference, please write, fax or call us with the numbers you
have, and we will be glad to translate them for you.
This catalog lists only a small sample of the parts currently available. If there are other items needed,
call, write, email or fax and we will be happy to check availability and price.
Page - 3
LATHE PARTS LISTING INDEX
PARTS GROUP
PAGE:
GEAR BOX GEARS, SHAFTS, ETC.
MISCELLANEOUS HEADSTOCK PARTS
BULL GEARS
PULLEY GEARS
BACK GEARS
SHIFTER RACK (For Back Gear)
SPINDLE GEARS
DRIVE PARTS
DRIVE BELTS
REVERSE GEAR BRACKETS
CHANGE GEAR STUDS AND BRACKETS
CHANGE GEARS
HANDWHEELS AND HANDLES
CROSSFEED SCREWS AND NUTS
COMPOUND SCREWS AND NUTS
MITER GEARS
CROSSFEED GEARS
RACK PINION GEARS
RACKS
LEAD SCREWS
GEARS, APRON
APRON CLUTCH
MISCELLANEOUS APRON PARTS
HALF NUTS AND CAMS
MISCELLANEOUS SADDLE PARTS
GIBS
WAY WIPERS AND FELTS
TOOL POSTS
THREADING INDICATOR DIAL
TAILSTOCKS AND PARTS
FACE PLATES, DRIVE PLATES, CHUCK BACKS
FOLLOWER REST & CENTER (STEADY) REST
TURRET PARTS
CENTERS
ADAPTER SLEEVES
TAPER ATTACHMENT
COLLET ATTACHMENT
CARRIAGE STOPS
CHUCKS
METRIC THREADING INFORMATION
QUICK CHANGE TOOLPOSTS
TURNING TOOLS
PRECISION LEVELS
COLLET CHUCKS
Page - 4
6
8
9
10
10
11
11
11
12
13
13
14
15
16
16
17
17
17
17
17
18
18
19
19
20
21
21
22
22
23
24
24
24
25
25
25
26
26
27
28
30
31
31
32
QUICK CHANGE GEAR BOXES
General Diagram
Illustration Numbers refer to the following pages with lists for the
LB-210, LA-1240-2, 2200, 6200, and LA-24-1 Quick Change Gear Boxes
and the Miscellaneous Parts for Gear Boxes
Page - 5
9", 10" 11" & 2900 Series 12" Lathes (20 D.P.)
Logan Lathe Assembly LB-210 & LA-1240-2 Gear Boxes
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Part Number
LP-1002
LP-1076
LP-1004
LP-1005
LP-1006
LP-1007
LP-1008
LP-1009
LP-1010
LP-1011
LP-1012
LP-1013
LP-1014
LP-1016
LP-1100
LP-1147
LP-1146
Old Part No.
LA-1219A (L-1571)
LA-1220A (L-1572) (w/
Q14-00802)
LA-1223 (L-1506) (w/
Q14-00801)
LA-1225
LA-1226
LA-1227
LA-1228
LA-1229
LA-1230
LA-1231
LA-1232
LA-1233
LA-1213 (L-1438) (w/
Q14-03351)
LA-1214
LA-1217-1 (17A-31346)
LA-1222 (17A-31222)
LA-1215-1 (17A-31345)
32/16
32/16
1.7/0.9
1.7/0.9
0.765
0.765
Bore
(*=with
Bushing)
0.438
0.438*
16
0.900
0.382
0.438*
16
18
20
22
23
24
26
28
24
40
0.900
1.000
1.100
1.200
1.250
1.300
1.400
1.500
1.300
2.100
0.382
0.313
0.313
0.313
0.313
0.313
0.313
0.313
0.563
0.370
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.500
0.375*
No. of Teeth
O.D.
Width
22
1.200
0.370
Drive Shaft, 0.625 Dia. Drive End
Stack Shaft, 0.437 Dia.
Slider Shaft, 0.625 Dia.
0.625 w/Key
See Next Page for Illus. Number 18 through 35
2500 Series 12" & 14" Lathes (16 D.P.)
Logan Lathe Assembly 2200 & 6200 Gear Boxes
Illus. No.
Part Number
1
2
LP-1017
LP-1020
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
LP-1022
LP-1023
LP-1024
LP-1025
LP-1026
LP-1027
LP-1028
LP-1029
LP-1030
LP-1031
LP-1032
LP-1033
LP-1160
LP-1161
LP-1162
Old Part No.
2219-A (L-1391)
2220-A (L-1392) (w/
Q14-01101)
2223 (w Q14-01100)
2225
2226
2227
2228
2229
2230
2231
2232
2233
2213 (w/ Q14-03351)
2214
2217
2222
2215
No. of Teeth
32/16
32/16
O.D.
2.13/1.13
2.13/1.13
Width
0.982
0.982
16
1.125
0.483
16
1.125
0.437
18
1.250
0.437
20
1.375
0.437
22
1.500
0.437
23
1.562
0.437
24
1.625
0.437
26
1.750
0.437
28
1.875
0.437
24
1.625
0.592
38
2.500
0.370
22
1.500
0.370
Drive Shaft, 0.625 Dia Drive End
Slider Shaft, 0.750 Dia
See Next Page for Illus. Number 18 through 35
Page - 6
Bore
(*=with
Bushing)
0.563
0.563*
0.563*
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.563
0.375*
0.750 w/Key
10" & 11" Lathes (16 D.P.)
Logan Lathe Assembly LA-24-1 Gear Boxes
To Serial Number 46561
Illus. No.
1
2
3
4
5
6
7
8
9
9A
10
11
12
13
14
15
16
17
Part Number
LP-1137
LP-1134
LP-1148
LP-1158
LP-1149
LP-1150
LP-1151
LP-1152
LP-1153
LP-1156
LP-1154
LP-1155
LP-1157
LP-1130
LP-1131
LP-1301
LP-1300
LP-1129
Old Part No.
LA-500-A
LA-502-A (w/ Q14-00788)
LA-504 (w/ Q14-00789)
LA-499
LA-491
LA-492
LA-490
LA-494
LA-493
LA-505
LA-495
LA-496
LA-506
LA-497 (w/ Q14-00790)
LA-498
LA-474
LA-470
LA-472-1
No. of Teeth
O.D.
Width
32/16
2.13/1.13
0.592
32/16
2.13/1.13
0.530
16
1.125
0.327
16
1.125
1.200
18
1.250
0.281
20
1.375
0.281
22
1.500
0.281
23
1.562
0.281
24
1.625
0.281
24
1.625
0.312
26
1.750
0.281
28
1.875
0.281
24
1.625
0.640
40
2.625
0.495
22
1.500
0.495
Drive Shaft, 0.625 Dia Drive End
Slider Shaft, 0.750 Dia x 8-7/8" Long
Bore
(*=with
Bushing)
0.563
0.563*
0.688*
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.438*
0.750 w/Key
MISCELLANEOUS PARTS FOR GEAR BOXES
Illus.
No.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Description
Plunger
Oilless Brg.
Oilless Brg.
Oilless Brg.
Oilless Brg.
Oilless Brg.
Oilless Brg.
Spacer
Collar
Pin
Knob
Spring
Lever, L.H.
Lever, R.H.
Bushing
Key
Spacer
Spacer
Thread/Feed Chart
End Guard
Lever Assembly
Small Gear Box LB-210 &
LA-1240-2
LP-1187 (LA-1207)
Q14-02531
Q14-00790
------Q14-00617
Q14-00800
Q14-00621
LP-1302 (LA-239)
LP-1264 (LA-996)
Large Gear Box 2200 & 6200
LP-1187 (LA-1207)
Q14-00782
Q14-00794
Q14-00794
Q14-00617
Q14-00794
Q14-00804
LP-1302 (LA-239)
Washer LP-1395(2212)
Snap Ring Q15-00932
LP-1193 (LA-1212)
LP-1193 (LA-1212)
LP-1331 (LA-1210)
LP-1332 (2210)
LP-1229 (LA-1208)
LP-1229 (LA-1208)
LP-1340 (LA-1203)
LP-1344 (2202)
LP-1341 (LA-1204)
LP-1344 (2202)
LP-1343 (LA-1209)
LP-1343 (LA-1209)
LP-1393 (LA-1234)
LP-1307 (2234)
LP-1191 (LA-1224)
LP-1306 (2224)
LP-1079 (6145)
LP-1369 (2221)
LP-1785 (LA-1205)
-------LP-1981 (LA-1202)
-------LP-1415 (LA-1203 or LA-1204) Specify L.H. or R.H.
Page - 7
Early Gear Box LA-24-1
(To S/N 46561)
LP-1492 (LA-479)
------Q14-00787
------------Q14-00794
Q14-00617
LP-1302 (LA-239)
(LA-319)
(LA-483)
LP-1650 (LA-480)
(LA-481-1)
(LA-478-1)
(LA-477-1)
------(LA-471)
------------LP-1785 (LA-508)
--------
HEADSTOCK, MISCELLANEOUS See Also "Reverse Gears", "Brackets", "Back Gears", "Change Gears",
"Bull Gears", "Spindle Gears", & "Adapter Sleeves")
Part Number
LP-1191
LP-1219
LP-1223
LP-1238
LP-1243
LP-1256
LP-1257
LP-1258
LP-1259
LP-1276
LP-1280
LP-1283
LP-1294
LP-1295
LP-1296
LP-1303
LP-1304
LP-1310
LP-1337
LP-1347
LP-1355
LP-1356
LP-1358
LP-1359
LP-1360
LP-1361
LP-1405
LP-1406
LP-1407
LP-1409
LP-1418
LP-1449
LP-1453
LP-1454
LP-1459
LP-1483
LP-1582
LP-1583
LP-1584
LP-1586
LP-1638
LP-1717
LP-1795
LP-1796
LP-1827
LP-1843
LP-1844
LP-1864
LP-1933
LP-1934
Old Part No.
LA-1224
LA-1022
LA-331
LA-149
LA-230
LA-664-1
LA-666
LA-672
LA-686
LA-1011
LA-510
LA-663
LA-677
LA-678
LA-226
LA-660
LA-514
LB-9
6104
LA-330
LA-1007
LA-224
2040
2039
2038
2036
LA-259
LA-130-1
LA-132
LA-1019
LA-117
LA-109-1
LA-384
LA-379
LA-1023
LA-131
2611
2612
6009
2767
LB-16
LA-1017
8524
8525
LA-657
LB-12
LB-5
6090
6014, 7421
6813
Description
Spacer
Headstock Clamp (Rear)
Hinge Block (Used with LP-1243)
Stop Pin w/ Set Screw
Hinge Pin
Retaining Collar
Take-Up Nut
Grease Seal
Take-Up Nut
Grease Seal
Change Gear Bracket Stop
Bearing Cover
Spacer, 1-3/8" ID x 1-5/16
Headstock Clamp (Front)
Headstock Clamp (Rear)
Spindle, 1-1/2" - 8 Th'd 12-3/4" Lg (800 & 1800 Series 10" Lathes)
Knob for Gear Cover
Spindle, 1-1/2" - 8 Th'd 9-27/32" Lg (9" Lathe)
Cover Nut
Hinge Bracket
Lock (Reverse Gear Handle)
Hinge Pin for LP-1418
Spring Anchor Pin (12" Lathes)
Spring Anchor Pin (12" Lathes)
Spring (12" Lathes)
Shoulder Pin (12" Lathes)
Take-Up Nut
Retaining Collar
Retaining Nut
Take-Up Nut
Hinge Bracket for LP-1356 & Headstock Cover
Spindle (Model 200 Series)
Hinge Bracket (Snowshoe Cover)
Hinge Pin
Hinge Bracket (Drive Box, 11" Lathes)
Retaining Collar (Ward's Lathe)
Brake Lever
Brake Shoe (12" Lathes)
Handwheel (12" Lathes)
Pulley (12" Lathes)
Belleville Washer
Spindle Spacer
Belleville Washer (14" Lathe)
Bearing Spacer
Hinge Bracket (Drive Box, 10" Lathes)
Take Up Nut (9" Lathe)
Spindle Pulley (9" Lathe)
Stud for Guard
Lock Nut
Lock Nut
Page - 8
HEADSTOCK, MISCELLANEOUS
Part Number
LP-1935
LP-1936
LP-1937
LP-1938
LP-1943
LP-1947
LP-1952
LP-1954
LP-2047
LP-2071
LP-2076
Q22-00634
Continued
Old Part No.
6814
6824
6825
7417
LA-1012
LA-698
2027
LA-1015
LA-1144
2313-1
LA-1016
0634
Description
Lock Nut
Collar
Spacer
Driver
Fiber Washer
Belleville Washer
Fiber Washer
Spacer
Spindle Cone Pulley, 4-Step V, 11” Lathes
Draw Nut, L-00 Spindle
Belleville Washer
Rubber Bumper for Cover
BULL GEARS
Part Number
LP-1198
LP-1199
LP-1205
LP-1208
LP-1221
LP-1374
LP-1379
LP-1556
LP-1724
LP-1083
LP-1200
LP-1201
LP-1202
LP-1380
LP-1381
LP-1382
LP-1789
LP-1790
LP-1791
LP-1860
LP-1900
Notes:
LP-1198
LP-1199
LP-1205
LP-1208
LP-1221
LP-1374
LP-1379
Old Part No.
LA-120-1
LA-654-2
LA-120-2
LA-1003
LB-4
LA-654
LA-28
Complete
6004
2004
LB-13
LA-346
LA-345
LA-676
LA-675
LA-673
7851
7850
7849
6034
LA-248
No. of Teeth &
Pitch
72T., 14 D.P.
72T., 14 D.P.
72T., 14 D.P.
90T., 16 D.P.
78T., 16 D.P.
72T., 14 D.P.
72T., 14 D.P.
O. D.
5.286
5.286
5.286
5.750
5.000
5.286
5.286
89T., 12 D.P.
7.583
82T., 14 D.P.
6.000
Pull Pin for LP-1221 (LB-4)
"U" Type Spring for Pull Pin
3/8" Dia. Pull Pin
3/8" to 5/16" Dia. Pull Pin
Locking Lever for LP-1379
Locking Spring for LP-1379
Locking Pin for LP-1379
Pull Pin Bushing
Pull Pin Sleeve
Pull Pin
Spring Wire
Spring (Prior to S/N 37062)
Includes
Width
Bore
Pull Pin
LP-1202
1.188
1.250
LP-1201
1.188
1.492
LP-1201
1.188
1.250
LP-1201
1.250
1.875
LP-1083
1.063
1.492
------1.375
1.492
Incl. LP-1374, LP-1380, LP-1381,
LP-1382
------1.575
2.625
------1.250
2.375
Used on 200 Series Lathes prior to Serial No. 35721 and Wards Lathes prior to approx. 8000
Used on 800 & 1800 Series Lathes after Serial No. 37063
Used on 200 Series Lathes after Serial No. 35722 and Wards Lathes after approx. 8000
Used on 900 & 1900 Series Lathes
Used on 400, 1400, & 9B Series Lathes
Used on 800 Series Lathes prior to Serial No. 37063
Used on 800 Series Lathes prior to Serial No. 37063
Page - 9
PULLEY GEARS / CONE PINIONS
Part
Number
LP-1082
LP-1163
LP-1165
LP-1166
LP-1203
LP-1467
LP-1555
LP-1939
Old Part Number
LA-119 (To S/N 22055)
LA-656 (w/Q14-00781)
LA-119-1 (w/Q14-00793)
LA-1013 (w/Q14-00805)
LA-656-1 (w/Q14-00781)
LA-688 (w/Q14-00781)
7415
2026
Teeth
30T
30T
30T
40T
30T
30T
40T
40T
Width
Tooth
O. D.
Teeth
Total
14
2.286
0.625
1.375
14
2.286
0.625
1.375
14
2.286
0.625
1.375
16
2.625
0.625
1.813
14
2.286
0.625
1.375
(Same as LP-1203, but with Lugs)
12
3.500
1.000
1.625
14
3.000
.875
2.313
Pitch
Hub
Dia.
1.750
1.938
1.938
5.500
2.125
Bore (*=
w/Bush.)
1.250
1.492*
1.250*
1.875*
1.492*
4.625
2.625
2.563
2.000*
BACK GEARS AND MISCELLANEOUS PARTS
Part
Number
LP-1119
LP-1168
LP-1172
LP-1181
LP-1182
LP-1192
LP-1416
LP-1417
LP-1528
LP-1529
LP-1723
LP-1209
LP-1232
LP-1233
LP-1234
LP-1235
LP-1358
LP-1359
LP-1360
LP-1361
LP-1375
LP-1735
LP-1736
LP-1847
LP-1848
LP-1849
LP-1850
Old Part Number
LB-21
LA-123
2009 (To S/N 70503)
LA-129
LA-124
LA-1006/18C-39082
2322 (From S/N
70503)
2321 (From S/N
70503)
6037
6038
2030 (To S/N 70503)
LA-1020
LA-125
LA-126
LA-127 (w/Q1400614)
LA-128 (w/Q1400614)
2040
2039
2038
2036
LA-56
6036
6039
LB-22-1
LB-24-1
LB-23-1
LB-19
No.
Teeth
68/26
70
62
24
28
80/30
62
16 D.P.
14 D.P.
14 D.P.
16 D.P.
14 D.P.
16 D.P.
14 D.P.
4.375
5.143
4.571
1.625
2.143
5.125
4.571
3.660
0.563
0.750
0.438
0.563
5.218
1.165
0.750
1.188
0.625
0.500
1.188
0.875
0.875 (12")
20
14 D.P.
1.571
1.313
0.875 (12")
1.500
1.625
0.875
1.125 (14")
1.125 (14")
0.625 (12")
Pitch
O.D.
75
12 D.P.
6.417
26
12 D.P.
2.333
20
14 D.P.
1.571
Eccentric Shaft Bushing (11" Lathe)
Eccentric Shaft for Quill
Quill for Back Gear
Bushing, 0.625 Lg. (For LP-1232)
Bushing, 1.438 Lg. (For LP-1232)
Spring Anchor Pin (12" & 14" Lathes)
Spring Anchor Pin (12" & 14" Lathes)
Spring (12" Lathes)
Shoulder Pin (12" Lathes)
Shifter Rack Assembly (See also Page 12)
Back Gear Quill
Back Gear Shaft
Eccentric Handle w/ Pin
Back Gear Shaft
Bearing
Collar
Page - 10
Width
Bore
SHIFTER RACK ASSEMBLY
Part
Number
Old Part Number
Description
LP-1204
LP-1206
LP-1245
LP-1348
LP-1375
LP-1376
Q21-00922
LA-264
LA-238
LA-243
LA-275
LA-56
LA-241
0922
Latch Key
Latch Spring
Collar w/ Set Screw Q06-00310
Pin for Latch
Shifter Rack Assembly Complete as Shown
Rack
Ball Knob Handle
SPINDLE GEARS
Part
Number
Old Part Number
No. of
Teeth & Pitch
O. D.
Width
Bore
LP-1120
LP-1123
LP-1124
LP-1197
LP-1458
2025 (12" Lathe)
LA-215-1 / 8309
LA-1018
LA-665-1 (18A-31337)
7418
42T. 16 D.P.
30T. 16 D.P.
46T. 20 D.P.
30T. 16 D.P.
48T. 16 D.P.
2.750
2.000
2.400
2.000
3.125
0.688
0.656
0.699
0.656
1.250/
0.688
2.000
1.125
1.750
1.313
2.250
DRIVE PARTS
See Also Drive Belts, Page 10
Part
Number
Old Part No.
Description
LP-1101
LP-1169
LP-1269
LA-339
LA-317
LA-658
LP-1271
LP-1273
LP-1274
LP-1275
LP-1324
LP-1338
LP-1339
LP-1413
LP-1453
LP-1454
LP-1459
LP-1526
LP-1551
LP-1561
LP-1562
LP-1651
LA-364
LA-307L
LA-307R
2294
LA-318
6872
6871
LA-339
LA-384
LA-379
LA-1023
LA-366
LA-1037
LA-387
LA-936
2126
Counter Shaft, 3/4" Dia x 10-3/8" Lg.
Counter Shaft, 3/4" Dia x 11-1/8" Lg.
Rubber Bushing, 1-3/8" x 1" x 13/16" Lg.
(See also LP-1459 Hinge Bracket)
Cover Spring Catch
Head, L.H. For Center Shaft Adjusting Rod
Head, R.H. For Center Shaft Adjusting Rod
Adjusting Rod
Bearing w/ Q14-00804 & Q19-01147
Gear, 74T, 16 D.P., For Speed Indicator
Gear, 14T, 16 D.P., For Speed Indicator
Pin For Pivots
Cover Hinge Bracket (Snowshoe)
Cover Hinge Pin
Hinge Bracket (Drive Box) Used with LP-1269
Adjusting Screw, 3/8-16, w/Nut
Motor Pulley, 2 Step Specify Bore Size *Must be used with LP-1697*
Adjusting Screw (Drive Support)
Cam Stud
Rod Bracket
Page - 11
DRIVE PARTS
LP-1659
LP-1672
LP-1684
LP-1697
LP-1701
LP-1702
LP-1748
LP-1805
LP-1806
LP-1807
LP-1830
LP-1832
LP-1841
LP-1865
LP-1868
LP-1885
LP-1886
LP-1944
LP-1950
LP-1958
LP-1959
LP-1998
LP-2011
LP-2013
Continued
2171
Q22-00647
LA-1036
2444
2447
LB-102
LB-99
LB-100
LB-101
2453
LB-38
LA-603
6865
6271
LA-349
LA-912
2141
LA-382
LA-365
LA-367
6616
6602
6606
Countershaft Bracket Ass'y w/ Ball Bearings & Shaft
Motor Pulley **Specify Bore**
Rubber Foot for LP-1561
Countershaft Drive Pulley *Must be used with LP-1551*
Pulley Center (For LP-1830) *Recommend ordering LP-1830 Complete*
Shaft (For LP-1830) *Recommend ordering LP-1830 Complete*
Countershaft 3/4" Dia. x 8-3/4" Lg.
Countershaft Pulley (2 Step)
Countershaft Pulley (3 Step)
Motor Pulley (2 Step) **Specify Bore**
Variable Speed Pulley Ass'y, 6" Dia. (For 1" Wide Belt)
Hinge Pin for Cover
Countershaft Pulley (3 Step V, for 10" Lathe)
Motor Pulley (14" Lathe w/ 1-3/16" Wide Belt) **Specify Bore**
Motor Pulley (14" Lathe w/ 1" Wide Belt) **Specify Bore**
Motor Pulley (2 Step) **Specify Bore** *Must be used with LP-1886*
Countershaft Pulley (2 Step) *Must be used with LP-1885*
Drive Shaft (Cabinet Drive)
Stay Bar
Shoulder Pin
Shoulder Pin
Variable Speed Pulley Ass'y, 7-1/4" Dia. (For 1-3/16" Wide Belt)
Pulley Center (For LP-1998) * Recommend ordering LP-1998 Complete*
Shaft (For LP-1998) * Recommend ordering LP-1998 Complete*
DRIVE BELTS
FLAT BELTS
Part Number
Old Part No.
Size
Comments
LP-1183-?
LA-679
1” x 39”
Part No. ending with “-1”
LP-1184-?
LA-916
1” x 38”
indicates a flat belt with
LP-1185-?
LA-1038
1” x 40”
metal connecting clip; “-2”
LP-1186-1
LA-1086
1” x 53½”
indicates an endless belt
NOTE: Unless otherwise specified, Flat Belt with connecting clip will be furnished
For Lathe:
10” Bench & Floor Models
10” Cabinet Models
11” Bench/Floor Models
11" Cabinet Models
V-BELTS
Q25-03619
Q25-03618
Q25-03634
Q25-03464
Q25-03643
Q25-03484
Q25-03640
Q25-03642
Q25-03586
Q25-03528
Q25-03527
Q25-03585
Q25-03583
Q25-03584
Q25-02096
Q25-02097
LB-8
LB-105
LA-388
LA-390
LA-935
LA-1146
2129
2140
2150
2173
2174
6274
6862
6863
1/2" x 46"
1/2" x 31"
1/2" x 51"
1/2" x 40"
1/2" x 45"
5/8" x 42"
5/8" x 29"
5/8" x 40"
1/2" x 50"
1" x 61-1/4"
1" x 39-1/4"
1" x 70-3/4"
1-3/16" x 39-3/8"
1-3/16" x 72"
1-3/16" x 41-1/8"
1-3/16" x 69-3/8"
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Variable Speed
Page - 12
9" Lathes
9" Lathes
10" Floor Models
10" & 11" Lathes
10" Cabinet Lathes
11" Bench & Floor
10", 11", &12"
Cabinet Models
11" Cabinet Lathes
#2500-V
#2500-V, #6500
#6500
#6530/6565
#6530/6565
#7525
#7525
REVERSE GEAR BRACKETS, SHAFTS, ETC.
(For Gears, See "Idler, Reverse, Stud, and Change Gears")
Part Number
Old Part No.
Description
LP-1167
LA-144
Reverse Gear Stud
LP-1207
LA-138
Reverse Gear Shaft
LP-1216
LA-145
Plunger Lever Pivot Pin
LP-1231
LA-139
Reverse Gear Bracket Plunger Lever
LP-1236
LA-136
Reverse Gear Plunger Spring
LP-1237
LA-140
Plunger *Not Avail., Use LP-1581*
LP-1265
LA-135
Plunger Lever Spring
LP-1355
LA-1007
Bracket Retainer (Lock)
LP-1388
2054
Pinion Stud
LP-1389
LA-261
Spacer for Reverse Gear Shaft
LP-1390
2076
Reverse Gear Shaft
LP-1419
6068
Plunger Lever for LP-1491
LP-1422
LA-137-2
Reverse Gear Bracket (10" Lathe)
LP-1478
LA-1026
LP-1491
6841
Reverse Gear Bracket (6530, 6565 & 7500 14" Lathe)
LP-1527
6844
Position Plate (14" Lathe [For LP-1491])
LP-1531
6066
Reverse Gear Bracket (Light 14" Lathe)
LP-1532
6067
Position Plate (For LP-1531)
LP-1557
6069
Bracket Retainer (14" Lathe)
LP-1579
2077
Reverse Gear Bracket (2500 Series 12" Lathe)
LP-1580
2008
Plunger Lever (For LP-1579)
LP-1581
LA-140-2 (36A-31312)
Plunger
LP-1654
LB-33
Reverse Gear Shaft (9" Lathe)
LP-1655
LB-29
LP-1696
LA-4-2
Reverse Gear Assembly
LP-1714
LB-32
Pinion Stud (9" Lathe)
LP-1942
LB-28
Reverse Gear Assembly (9" Lathe)
LP-1953
6008
Stop Pin
LP-2028
2078
Square Key
CHANGE GEAR STUDS AND BRACKETS
Part
Number
LP-1122
LP-1195
LP-1196
LP-1247
LP-1305
LP-1349
LP-1386
LP-1387
LP-1392
LP-1397
LP-1403
LP-1404
LP-1411
LP-1530
LP-1546
LP-1547
LP-1548
LP-1549
LP-1550
LP-1835
Part Of Assembly
LP-1546
LP-1547
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Old Part No.
6054
LA-231
LA-249
LA-312
LA-786
LA-227
6057
6058
LA-787
6047
6048
6049
LA-232
6051
Description
Bushing
Bushing
Key
Nut
Stud
Change Gear Bracket (Hub 1-1/2" Thick)
Washer
Collar
Spacer
Spacer
Key
Washer, 1-3/8 x 1/2 x 1/8
Washer, 1-1/8 x 1/16
Change Gear Bracket (14" Lathes)
Stud Ass'y (9", 10", 11" & 2900 Series 12")
Stud Ass'y (2500 Series 12" & 14")
Change Gear Stud
Spacer
Nut
Washer
Page - 13
CHANGE GEAR STUDS AND BRACKETS Continued
LP-1554
LP-1587
LP-1588
LP-1589
LP-1590
LP-1591
LP-1766
LP-1797
LP-2027
LA-476
2244
LA-517
2264
2266
2265
LB-236
LB-27
6046
Change Gear Bracket (Hub 1-1/4" Tk.)
Change Gear Bracket (12" Lathes)
Adjusting Bracket w/Pin, Washer, & Spacer
Pin (For LP-1588)
Washer (For LP-1588)
Spacer (For LP-1588)
Change Gear Bracket (9" Lathe w/ Quick Change)
Change Gear Bracket (9" Lathe w/o Quick Change)
Hanger
IDLER, REVERSE, STUD AND CHANGE GEARS
Illus.
Number
Part
Number
Old Part Number
"LB", 9" LOGAN LATHES (20 D.P.)
1
LP-1080
LB-30
2
LP-1194
LB-31
10" LATHES (16 D.P.)
1
LP-1034
LA-216
(w/Q14-00616)
2
LP-1035
LA-217
10", 11" & 2900 SERIES 12" LATHES (16 D.P.)
3 or 4
LP-1036
LA-200
4
LP-1037
LA-201
3 or 4
LP-1038
LA-202
4
LP-1039
LA-203
3 or 4
LP-1040
LA-204
4
LP-1041
LA-205
4
LP-1042
LA-206
4
LP-1043
LA-207
3 or 4
LP-1044
LA-208
4
LP-1045
LA-209
4
LP-1046
LA-210
4
LP-1047
LA-211
4
LP-1048
LA-212
3 or 4
LP-1049
LA-213
3 or 4
LP-1050
LA-214
4
LP-1051
AC-135
4
LP-1052
AC-136
4
LP-1053
AC-137
4
LP-1054
AC-138
4
LP-1055
AC-139
4
LP-1056
AC-140
4
LP-1057
AC-141
4
LP-1058
AC-186
4
LP-1059
AC-187
4
LP-1060
AC-188
4
LP-1665
4
LP-1666
No.
of
Teeth
O. D.
Width
Bore (*=with
Bushing)
36
23
1.900
1.250
0.437
0.437
0.625*
0.625
30
2.000
0.563
0.625*
30
2.000
0.563
0.625
16
18
24
32
36
40
44
46
48
52
54
56
60
64
72
20
22
26
28
80
100
127
39
42
66
37
47
1.125
1.250
1.625
2.125
2.375
2.625
2.875
3.000
3.125
3.375
3.500
3.625
3.875
4.125
4.625
1.375
1.500
1.750
1.875
5.125
6.375
8.063
2.563
2.750
4.250
2.438
3.063
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.438
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
Page - 14
11" LATHE (20 D.P.)
Illus.
Number
Part
Number
1
2
3
LP-1061
LP-1062
LP-1040
Old Part Number
No. of
Teeth
O. D.
Width
Bore
(*=with
Bushing)
LA-1027 (w/Q14-00616) (M-1355)
LA-1028
LA-204 (16 D.P.)
34
46
36
1.800
2.400
2.375
0.563
0.563
0.438
0.625*
0.625
0.625
28
42
1.875
2.750
0.625
0.625
0.625*
0.625
36
48
2.375
3.125
0.625
0.625
0.625*
0.625
30
60
60
54
100
127
66
39
72
64
37
47
2.000
3.875
3.875
3.500
6.375
8.063
4.250
2.563
4.625
4.125
2.438
3.063
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.625
0.938
0.625
0.938
0.938
0.625
0.625
0.625
0.625
0.938
0.938
12" & 14" LATHES (16 D.P.) (Except 6530, 6565, & 7500 Series)
1
2
LP-1063
LP-1064
2051 (w/Q14-01357) (M-1238)
2052
6530, 6565, & 7500 SERIES 14" LATHES (16 D.P.)
1
2
LP-1065
LP-1066
6842 (w/Q14-00616) (M-1233)
6843
2500 SERIES 12" & 14" LATHES (16 D.P.)
3
3 or 4
4
3
4
4
3
3
3
3 or 4
4
4
LP-1067
LP-1068
LP-1069
LP-1070
LP-1071
LP-1072
LP-1073
LP-1074
LP-1075
LP-1414
LP-1667
LP-1668
2247
2248
6059
2252
2255
2256
2253
2251
2254
2249
HAND WHEELS AND HANDLES
Part
Number
LP-1510
LP-1511
LP-1512
LP-1513
LP-1539
LP-1542
LP-1685
LP-1739
LP-1945
Old Part No.
LA-335, LB-49
LA-299
LA-121
LA-122
LA-1096
8713
2281
2087
6168
Outside
Diameter
2-3/8"
3"
4"
5"
5"
6-3/8"
3-1/16"
2-5/16"
6-1/2"
Bore
0.313
0.375
0.375
0.500
0.375
0.500
7/16-40 Th'd
3/8-40 Th'd
0.500
HANDLES FOR ABOVE HANDWHEELS
Q21-03345
Q21-03614
1/4" Shank
5/16" Shank
Page - 15
CROSSFEED SCREWS AND NUTS
Crossfeed Screw
Crossfeed Nut
L.H.
Acme
Thread
7/16-10
7/16-10
7/16-10
7/16-10
7/16-10
7/16-10
7/16-10
5/8-10
7/16-10
7/16-10
7/16-10
5/8-10
3/4-10
ALL DIMENSIONS IN INCHES
L
LP-1099+ (LA-153)
LP-1094£ (LA-173)
12-7/8
LP-1099+ (LA-153)
LP-1095 (LA-173-1)
12-7/8
LP-1099+ (LA-153)
LP-1096 (LA-1062)
12-7/8
LP-1105@ (LA-798)
LP-1095 (LA-173-1)
14-1/4
LP-1105@ (LA-798)
LP-1096 (LA-1062)
14-1/4
LP-1106 (LA-1154)
LP-1097 (LA-1163)
13-15/16
LP-1107 (2283)
LP-1098 (2083)
13-15/16
LP-1178 (6137)
LP-1179 (6133)
17-19/32
LP-1329# (2368)
LP-1098 (2083)
18-3/8
LP-1451 (LB-142)
LP-1450 (LB-141)
12-3/16
LP-1534 (LB-63)
LP-1535 (LB-50)
12-3/16
LP-1540# (6334)
LP-1179 (6133)
20-13/16
LP-1608 (7598)
LP-1610 (7438)
20-5/8
LP-1541 - Sleeve for LP-1540
Notes: # For Telescopic Taper Attachment; + Prior to Serial #71060;
@ After Serial #71060; £ Prior To Serial #17151
S
4-1/16
4-1/16
4-1/16
4-1/4
4-1/4
5-7/16
5-7/16
4-1/32
8-7/16
3-11/16
4-1/4
8-1/2
3-3/8
T
8-3/16
8-3/16
8-3/16
E
3/8-24
3/8-24
3/8-24
3/8-24
3/8-24
Tapped 1/4-28
9-13/16
7/16-40
7/16-40
9-3/4
5/16-24
3/8-24
6-7/8
3/8-24
12-5/16
5/16-24
11-11/16
9/16-18
M
0.734
0.745
1.057
0.745
1.057
1.307
0.963
0.887
0.963
0.806
0.677
0.887
0.938
COMPOUND SCREWS AND NUTS
Compound Screw
Compound Nut
LP-1141 (LA-799)
LP-1140 (LA-152)
LP-1170 (2088)
LP-1188 (6215)
LP-1904 (LA-1171)
LP-1142 (LA-697)
LP-1142 (LA-697)
LP-1142 (LA-697)
LP-1189 (6216)
LP-1142 (LA-697)
LP-1412 (LA-178)†
R.H.
ALL DIMENSIONS IN INCHES
Acme
Thread
L
B
T
A
3/8-10
5-1/4
1-5/16
2-27/32
15/16
3/8-10
5-7/16
1-1/2
2-27/32
15/16
3/8-10
5-13/16
1-5/16
2-5/8
1-1/2
1/2-10
7-7/8
2-9/16
4-23/32
1/2
3/8-10
5-7/8
2-13/16
2-1/2
----Compound Rest Nut (Rectangular) 3/8-10 R.H. Acme 0.500 C.L. Height
(Prior to S/N 32073)
Page - 16
MITER GEARS
Part
Number
Old Part No.
Description
LP-1212
LP-1213
LA-188
Gear w/ Bushing & Spur Gear
LA-189
Gear w/ Key
RECOMMEND ABOVE 2 ITEMS BE ORDERED TOGETHER
LP-1230
LA-256
Collar w/ 2 of Q06-00309
LP-1312
LA-196
Bearing w/ Q14-00618
CROSSFEED GEARS
Part
Number
Old Part Number
No. of
Teeth & Pitch
O. D.
Width
Bore
LP-1115
LP-1116
LP-1125
LP-1180
LP-1477
LP-1609
LA-190
LA-796
LA-1160
6136
LB-143
6453
16T. 16 D.P.
16T. 16 D.P.
16T. 16 D.P.
18T. 16 D.P.
16T. 20 D.P.
18T. 16 D.P.
1.125
1.125
1.125
1.250
0.900
1.250
0.328
1.625
0.625
0.813
0.500
0.430
0.430
0.618
0.430
0.740
1.500
RACK PINION GEARS
Part
Number
LP-1118
LP-1164
LP-1214
LP-1268
LP-1286
LP-1309
LP-1509
LP-1732
LP-1907
Old Part Number
LB-68
LA-155-1, 18A-31363
LA-155
LA-548-1
LA-548
LB-161
7749 (From S/N 78979)
6182 (To S/N 78979)
No. of
Teeth & Pitch
O. D.
Part
Number
Old Part No.
Description
LP-1629
LP-1630
LP-1631
LB-92
LA-154
LA-1069
For "LB", 9" Lathes
For Model 825
For Model 922
18-13/16" Lg.
26-13/16" Lg.
38-15/16" Lg.
LEAD SCREWS
Old Part No.
LA-1235
Bore
12T. 16 D.P.
0.875
0.625
w/ 9/16 Shaft
33/16T. 16 D.P.
2.19/1.13
.438/.562
0.500
33/16T. 16 D.P.
1.875
.438/.562
0.500
16T. 16 D.P.
1.125
w/ 5/8 Shaft
16T. 16 D.P.
1.125
1.344
0.500
40/16T. 20/16 DP
2.10/1.13
2.063
0.625
Handle Gear Shaft (Can use w/ LP-1286 as Alternate to LP-1268)
15T. 12 D.P.
1.417
w/ 5/8 Shaft
15T. 12 D.P.
1.417
w/ 5/8 Shaft
RACKS
Part
Number
LP-1946
Width
Description
For 10" Short Bed Lathe w/QC Gear Box
Page - 17
GEARS, APRON
Part
Number
Old Part No.
Description
LP-1215
LP-1252
LP-1260
LP-1267
LP-1285
LP-1287
LP-1288
LP-1289
LP-1290
LP-1291
LP-1313
LP-1482
LP-1497
LP-1673
LP-1733
LA-191
LA-522-1A, L-1423
LA-763
LA-547-1
LA-547
LA-556
LA-556-1
LA-550
LA-550-1
LA-551-1
LB-69
LA-158
6185, L-1648
LB-70
7753
Idler Shift Gear, 35T. 16 D.P.
Double Gear, 46/20T. w/Q14-00784
Sleeve Gear, 35T. 20 D.P., Spline Shaft
Gear, 55T. x 5/8" Bore, w/Keyway
Gear, 44T. x 1/2" Bore, w/Keyway
Gear, 40T. 16 D.P. w/Q14-00783
Gear, 50T. 20 D.P. w/Q14-00783
Handle Gear, 20T. 16 D.P.
Handwheel Shaft Gear, 15T. 20 D.P. 5/8" Bore
Double Gear, 46/16T. 16 D.P. w/Q14-00784
Gear, 38T. 20 D.P. 9/16" Bore
Handwheel Pinion & Shaft, 16T. 16 D.P. 2-15/16 Lg.
Double Gear, 62/30T. 16/20 D.P. 3/8" Bore
Handwheel Pinion & Shaft, 14T. 20 D.P. (#400 & #1400 Lathe)
Handwheel Pinion, 16T. 20 D.P. (14" Lathe)
APRON CLUTCH
Part
Number
LP-1251
LP-1261
LP-1262
LP-1263
LP-1281
LP-1282
LP-1352
LP-1519
LP-1520
LP-1559
LP-1560
LP-1564
LP-1573
LP-1632
LP-1730
LP-1731
LP-1751
LP-1752
LP-1758
LP-1759
LP-1760
LP-1826
LP-1834
LP-1871
LP-1916
LP-1920
Q13-00679
Old Part No.
Description
LA-539
LA-766
LA-764
LA-765
LA-521
LA-522
LA-760
LA-562-1
LA-532
LA-534
LA-533
LA-767
2271
LA-536
6251
7751
LA-566
6192
Thrust Ring
Retainer
Shaft
Spring
Clutch Disc (Outside Lobes)
Clutch Disk (Inside Spline)
Friction Washer
Worm, for 10", 11" &12" Lathes (From S/N 27623 to 67012)
Worm Wheel (Straight Bore from S/N 27623)
Worm Wheel (Tapered Bore to S/N 27623)
Clutch Cone
Belleville Washer
Worm, 12" Lathes (From S/N 67012)
Worm Wheel Bearing
Worm Wheel (14" Lathe)
Worm (14" Lathe after S/N 78626)
Sleeve Gear (Prior to S/N 27623)
Worm (14" Lathe to S/N 78626)
Spacer (Use with LP-1519 in Lieu of LP-1759)
Worm (Prior to S/N 27623)
Worm Washer (Prior to S/N 27623)
Worm Bearing Oiler (14" Lathe to S/N 78626)
Lever & Hub Ass'y
Sleeve Gear (Prior to S/N 50843)
Clutch Knob, Tapped 3/8-24
Clutch Knob, 5/16 Hole
Ball Thrust Bearing (For Clutch)
LA-562
LA-561
6167
LA-761A
LA-520
LA-531-1
LA-531
0679
Page - 18
APRON, MISCELLANEOUS
(See Also "Clutch Parts", "Half Nuts", "Apron Gears",
"Miter Gears", "Rack Pinion Gears"
Part
Number
Old Part No.
Description
LP-1218
LP-1220
LP-1225
LP-1226
LP-1227
LP-1228
LP-1255
LP-1270
LP-1279
LP-1284
LP-1298
LP-1314
LP-1408
LP-1461
LP-1543
LP-1558
LP-1563
LP-1637
LP-1734
LP-1753
LP-1792
LP-1852
LP-1909
Q14-01281
LA-164
LA-530
LA-564
LA-560
LA-577
LA-558
LA-565
2137
LA-559
LA-546
LA-298
LA-220
LA-527-1
2273
LA-156-1
LA-549
LA-192-1
LA-544
LA-167
6193
6189
LA-156
6169
01281
Cam Shaft Lever w/ Handle
Shift Lever
Shift Lever Spring
Shift Lever Knob
Shift Lever Plunger
Lock
Worm Bushing (From S/N 27623)
Key, 3/16" Sq. x 1-1/4" Lg.
Lock Guide
Shaft, 1/2" x 3-3/16" Lg.
Key, 3/16" Sq. x 3/8" Lg.
Key, 5/32" Sq. x 1/2" Lg.
Half Nut Plate
Worm Bearing (From S/N 67012)
Rack Pinion Stud
Handwheel Shaft
Idler Shift Shaft
Eccentric w/ Stud
Lead Screw Bracket, RH
Worm Bearing (14" Lathe to S/N 78626)
Stud for Eccentric (14" Lathe)
Rack Pinion Stud (To S/N 41310)
Eccentric w/ Stud LP-1792 (14" Lathe)
Oilless Bearing 1/2" Lg.
HALF NUTS & CAMS
Part
Number
LP-1090
LP-1091
LP-1092
LP-1093
LP-1102
LP-1117
LP-1466
LP-1084
LP-1085
LP-1084
LP-1761
Uses
For
Center
Old Part No.
Pin Type
Lead Screw
Height
LA-352 (From S/N 20324) Round Pin
3/4-8
0.94” (10" & 11" w/ Plain Apron)
LA-529
LP-1103 w/ Hex
3/4-8
1.31” (10",11" & 2900 w/ Auto Apron)
2274
Base & 1/4-20
7/8-8
1.313 (2500 Series)
6178
Hole
1-1/8-8
1.313 (14" Lathes)
LA-159 (To S/N 20324) 10-32 Th'd Str. Pin
3/4-8
0.938
10-32 Th'd Str. Pin
3/4-8
0.938
LB-184
LP-1465
3/4-8
0.938 (9" Lathes)
LA-354
Half Nut Cam & Shaft, 1.063 Shoulder Length
LA-161A
LA-541
6177A
Half Nut Cam & Shaft, (14" Lathe)
Page - 19
SADDLE, MISCELLANEOUS
(See Also "Gibs for Cross Slides", "Felt Wipers", "Tool
Posts", "Crossfeed Screws", "Compound Screws", "Handwheels"
Part
Number
LP-1079
LP-1224
LP-1242
LP-1277
LP-1299
LP-1317
LP-1320
LP-1322
LP-1367
LP-1371
LP-1372
LP-1377
LP-1398
LP-1399
LP-1485
LP-1487
LP-1488
LP-1489
LP-1490
LP-1498
LP-1506
LP-1507
LP-1517
LP-1518
LP-1533
LP-1552
LP-1574
LP-1578
LP-1599
LP-1633
LP-1647
LP-1648
LP-1725
LP-1726
LP-1727
LP-1728
LP-1729
LP-1737
LP-1738
LP-1740
LP-1798
LP-1799
LP-1800
LP-1801
LP-1802
LP-1804
LP-1836
LP-1837
LP-1838
Old Part No.
6145
LA-174
LA-571
LA-175
LA-744
LA-1147
LA-1148
LB-136
LA-570
LA-181
LA-197
LA-1149
LA-687
LA-689
LA-745
LA-254
6143
6144
LB-46
LA-797
LA-172
LA-683
LA-1164
LA-463
LA-1383, LB-137
LA-748
LA-171
LA-746
LA-671
6146
LA-1166
2086
6222
6221
2089
LA-1170
LA-1169
2282
2082
LA-180
2361
6338
2374
2356
6337
7348
6211
6212
LA-747
Description
Washer
Saddle Lock Nut
Saddle Lock Screw, 2-3/8" Lg.
Saddle Lock Screw, 1-3/4" Lg.
Lock Plug
Dial Lock Screw
Dial Lock Slug (Nylon Ball)
Feed Dial, 1-3/4" Dia. (See also LP-1533)
Felt Washer
Swivel Lock Bolt w/ Nut (12" & 14" Lathes)
Stud
Dial Lock Slug
Feed Dial, 1-7/32" Dia. (Use with LP-1399 or LP-1552)
Crossfeed Bushing, 1-7/32" Dia. (7/8-14 Th'd) (Use with LP-LP-1398)
Compound Rest Top (10” & 11” after S/N 50843)
Compound Bushing, 15/16" Dia (Obsolete, Order LP-1398 & LP-1552)
Saddle Lock Screw (14" Lathe)
Saddle Lock (14" Lathe)
Compound Rest Top (9" Lathe)
Bracket for Crossfeed Screw
Crossfeed Bushing, 15/16" Dia. (Obsolete, Order LP-1398 & LP-1399)
Compound Rest Top (10” & 11” prior to S/N 50843)
Spring for Dial
Washer for LP-1488
Compound Bushing, 1-3/4" Dia. (11/16-16 Th'd)
Compound Bushing, 1-7/32" Dia. (11/16-16 Th'd) See LP-1533 & LP-1322
Feed Dial, 15/16" Dia. (Obs, Order LP-1398 & Bushing LP-1399 or LP-1552)
Compound Rest Swivel
Compound Rest Swivel
Thrust Bearing
Compound Rest Swivel (12" Lathe)
Thrust Bearing
Thrust Washer
Compound Bushing (12" Lathe)
Cross Feed Dial (12" Lathe)
Compound Bracket
Crossfeed Bushing
Cross Feed Dial Bracket
Swivel Pin
Stud
Stud
Knurled Nut
Binding Lever
Bed Bracket
Cross Slide Extension
Compound Rest Base (Cross Slide) (From S/N 50843)
Page - 20
SADDLE, MISCELLANEOUS
Continued
Part
Number
Old Part No.
Description
LP-1845
LP-1851
LP-1903
LP-1905
LP-1928
LP-1929
LP-1931
LP-1932
LP-2015
Q10-03322
LB-64
LB-47
LA-1167
7352
LA-693
LA-692
LA-684
2762
LA-691
LA-198
Saddle Lock (9" Lathe)
Compound Rest Swivel (2900 Series Lathes)
Compound Rest Base (Cross Slide) (14" Lathe)
Cross Slide for Lever Operated Slide
Cross Slide Base
Chip Guard
Compound Rest Base (Cross Slide) (2500 Series Lathes)
Compound Rest Base, T-Slotted (Cross Slide)
Hardened Washer for Saddle Lock Screw
GIBS FOR CROSS SLIDES, & COMPOUND SLIDES
Part
Number
Old Part No.
Description
LP-1318
LP-1319
LP-1362
LP-1363
LP-1365
LP-1366
LP-1368
LP-1373
LP-1410
LP-1634
LP-1927
LA-749
LA-183
LA-1159
LA-1176
LA-535
LA-1063
LA-1064
LA-182
7411
6217
LA-465
Compound Gib, Bottom, 5-11/16" Lg.
Compound Gib, Top, 4-3/4" Lg.
Compound Gib, Bottom, 10" Lg.
Compound Gib, Top, 5" Lg.
Front Saddle Gib (10" Lathe)
Rear Gib (Used with Gib Bar LP-1368)
Gib Bar (For LP-1366)
Cross Slide Gib, 5-1/2" Lg.
Cross Slide Gib, 12-1/4" Lg.
Top Gib (14" Lathe)
Gib for Double Tool Post Cross Slide
FELT WIPERS FOR SADDLES
Part
Number
LP-1692
LP-1693
LP-1694
LP-1695
LP-1746
LP-1747
Old Part No.
LA-293, 294
6138, 6140
LA-290, 291, 292
6139, 6141
7714
7715
Description
Felt Wiper Set for 10", 11", & 12" Lathes (4)
Felt Wiper Set for 14" Lathes (4)
Wiper Cover Set for 10", 11", & 12" Lathes (4)
Wiper Cover Set for 14" Lathes (4)
Front Felt Wiper for Chucker Saddle Slide
Rear Felt Wiper for Chucker Saddle Slide
Page - 21
TOOL POST AND PARTS
(See also QC Toolposts on page 28)
Part
Number
LP-1315
LP-1316
LP-1325
LP-1326
LP-1346
Q23-00635
LP-1545
LP-1869
LP-1870
LP-1872
LP-1873
LP-1874
Q23-03617
Old Part No.
LA-244
LA-235
LA-237
LA-236
LA-250
0635
LA-244A
7624
7626
6234
6235
6236
6239
Description
Tool Post
Tool Post Screw
Tool Post Ring
Tool Post Block
Tool Post Wedge
Tool Post Wrench
Tool Post Complete as Shown (9", 10", 11", & 12" Lathes)
Tool Post Wedge
Tool Post Ring
Tool Post
Tool Post Screw
Tool Post Block
Tool Post Wrench
(See also QC Toolposts on page 28)
TOOL HOLDER BLOCKS For Double Tool Post Cross Slide
Part
Number
LP-1504
LP-1505
LP-1508
LP-1906
LP-1923
LP-1924
Old Part No.
LA-596
LA-595
LA-461
LA-466
LA-596
LA-595
Description
Front Tool Block
Rear Tool Block
Wedges, Pair
T-Nut
Front Tool Block
Rear Tool Block
THREADING DIAL
Part
Number
LP-1241
LP-1248
LP-1249
LP-1250
LP-1351
LP-1767
Old Part No.
LA-332
LA-1125
LA-323
LA-324
LA-1124
LA-12-2
LP-1768
LP-1823
LP-1825
LP-2185
Q14-00797
LA-322
6196
6195
LA-1122
0797
Description
Mounting Screw
Dial Face, 1-1/4" Dia.
Shaft
Dial Gear, Straight Teeth
Dial Gear, Helical Teeth
Threading Dial Ass'y, Complete
(9”, 10” & 11” Lathes)
Dial Face, 7/8" Dia.
Threading Dial Housing (14" Lathes)
Threading Dial Ass'y, Complete (14” Lathes)
Threading Dial Ass’y Complete (12” Lathes)
Oilless Bearings
Page - 22
TAILSTOCK SCREWS
Part
Number
LP-1143
LP-1144
LP-1190
Old Part No.
LA-146
LA-1092
6112
A
1.0
1.0
1.1
B
1.19
1.19
1.31
Tailstock Screw
T
2-31/32
4-13/32
6-3/16
L
5-5/16
6-3/4
8-19/32
L.H. Acme
Thread
7/16-10
7/16-10
5/8-10
TAILSTOCK PARTS
Part
Number
LP-1217
LP-1222
LP-1239
LP-1240
LP-1244
LP-1246
LP-1272
LP-1278
LP-1297
LP-1311
LP-1321
LP-1323
LP-1336
LP-1357
LP-1468
LP-1469
LP-1470
LP-1486
LP-1488
LP-1635
LP-1636
LP-1769
LP-1770
LP-1771
LP-1772
LP-1951
LP-1955
LP-1956
Q19-00626
Q23-03308
Q23-03575
Old Part No.
LA-177
LA-148
LA-147
LA-151
LA-263
LA-274
LA-1068
LA-185
LA-1091
LA-225
LA-1095
LA-1093
LA-793
LA-1094
6111
6120
LA-792
6119
6143
6109
6122
6121
6115
6116
7117
6118
6106
6107
0626
LA-176
Description
Binding Lever
Screw Retainer
Tailstock Spindle, 1-1/8" Dia. x 5-5/16" Lg. (#2 MT) (9" & 10" Lathes)
Binding Plug
Dauber
Hex Nut
Retainer
Binding Stud, 5/16" Dia. x 2" Lg.
Tailstock Spindle, 1-3/8" Dia. x 6-13/16" Lg. (#2 MT) (11" & 12" Lathes)
Clamp
Spindle Key
Binding Stud, 5/16" Dia. x 2-3/8" Lg.
Rubber Washer
Binding Plug
Screw Retainer (14" Lathe)
Thrust Washer (14" Lathe)
Rubber Washer (14" Lathe)
Tailstock Wrench (14" Lathe)
Tailstock Adjusting Screw (14" Lathe)
Tailstock Clamp (14" Lathe)
Tailstock Nut (14" Lathe)
Tailstock Spindle (14" Lathe)
Binding Plug, Top (14" Lathe)
Binding Stud (14" Lathe)
Binding Plug, Bottom (14" Lathe)
Spindle Key
Tailstock Top (14" Lathe)
Tailstock Base (14" Lathe)
Ball Oiler
Tailstock Wrench (10", 11", & 12" Lathes)
Tailstock Wrench (9" Lathes w/ 3/4" Hex Nut)
Page - 23
ACCESSORIES
FACE PLATES, DRIVE PLATES, & CHUCK BACKS
Part
Number
LP-1378
LP-1383
LP-2218
LP-1385
LP-1866
LP-1867
LP-2345
LP-1463
LP-1464
Old Part No.
Type
Size
LA-170
Drive Plate
6” Dia. 1½ ”-8 Thread
LA-1009
Drive Plate
6” Dia. 2¼” -8 Thread
2307
Drive Plate
7” Dia., L-00 Spindle
LA-1008
Face Plate
LA-344
Face Plate
8” Dia. 1½”-8 Thread
2010
Face Plate
2310
Face Plate
10” Dia. L-00 Spindle
AC-104
Chuck Back
6-3/8” Dia. 1½”-8 Thread
AC-107
Chuck Back
6-3/8” Dia. 2¼” -8 Thread
(CHUCK BACKS FINISHED ON SPINDLE SIDE, SEMI-FINISHED ON FRONT)
WE RECOMMEND A TRUEING CUT BE TAKEN ON ALL PLATES AFTER INSTALLATION ON LATHE
FOLLOWER REST
LP-2414
LP-2415
LP-2416
AC-196
AC-2196
6320
For 10” or 11” Logan Lathes
For 12” Logan Lathes
LP-2417
AC-192
Replacement Jaw for LP-2414
CENTER (STEADY) REST
LP-2410
LP-2411
LP-2412
LP-2413
AC-189
AC-290
AC-2189
6315
LP-2417
LP-2418
LP-2427
AC-192
AC-193
6323
Replacement Jaw for LP-2410 or LP-2411
Bed Clamp for LP-2410, LP-2411, LP-2412
Replacement Jaw for LP-2413
TURRET PARTS
LP-1686
LP-1840
LP-1853
LP-1875
LP-1876
LP-1877
LP-1878
LP-1879
LP-1881
LP-1882
LP-1883
LP-1884
LP-1940
LP-1941
LP-1948
Q23-03639
LA-578
6686
LA-921
LA-412
LA-447
LA-413
LA-985
LA-984
LA-583
LA-990
LA-924
LA-922A
LA-580
LA-975
LA-581
Turret Base Gib (Front or Back)
Collar
Tool Clamp
Cam
Coil Spring
Cam
Pilot Wheel Shaft
Pinion Gear
Turret Slide Gib
Stop Arm
Cover
Locking Post & Handle
Plunger
Bushing
Shot Pin Bushing
Turret Sleeve, 1" Dia. to #2MT
Page - 24
ACCESSORIES
DEAD CENTER
Q23-03307 (LA-187) #2 Morse Taper (Carbide Tipped)
LIVE CENTER LP-1474 (No. 595) #2 Morse Taper Shank
ADAPTER SLEEVES - SPINDLE NOSE
Part
Number
LP-1266
LP-1330
LP-1350
LP-1764
LP-1765
Old Part No.
LA-1021
LA-223
LA-1021-1
AC-160
AC-162
Description
o
3 45' to #2 Morse Taper (To Serial #52576)
#3 M.T. to #2 M.T. (9" & 10" Lathes)
o
2 to #2 Morse Taper (From Serial #52576)
#3AT Collet Adapter (9" & 10" Lathe)
Nose Cap for 1-1/2" 8 Th'd Spindle Nose
LP-1839
LP-1842
LP-1854
LP-1855
LP-1930
6023
LA-1056
LA-1055
LA-1055-1
6832
2 to #3 Morse Taper
o
3 45' to 5-C Collet Adapter (To Serial #52576)
o
2 to 5-C Collet Adapter (From Serial #52576)
o
2 to #3 Morse Taper (For L-0 Spindles Only)
o
TAPER ATTACHMENT
LP-1502
LP-1803
LP-1896
LP-1897
LP-1898
LP-1910
LP-1911
LP-1912
LP-1913
LP-1914
LP-1915
LP-1917
LP-1918
LP-1968
LP-1969
LP-1970
LP-1971
LP-1972
LP-1973
LP-1974
LP-1975
LP-1986
LP-1987
LP-1988
LP-1989
LP-1990
LP-1991
LP-1992
LP-1994
LP-1995
LP-1996
LP-1997
LP-2001
2357
AC-260
AC-258
AC-257
AC-299
AC-298
AC-295
AC-2296
AC-2295
AC-270
AC-275
AC-296
AC-256
AC-267
AC-260
AC-262
AC-263
AC-265
AC-266
AC-264
AC-269
2352
2353
2363
2354
2360
2372
2769
2369
2373
2366
2365
AC-261
Gib for Taper Attachment, 7-1/2" Lg.
Clamp
Index Bracket
Left Bracket
Slide Block, 1-13/32" High
Plain Taper Attachment, 10" Lathes
Plain Taper Attachment, 11" Lathes
Plain Taper Attachment, 2500 Series Lathes
Plain Taper Attachment, 2900 Series Lathes
Plain Taper Attachment, 400 & 1400 Lathes
Plain Taper Attachment, 9B Series Lathes
Compound Slide (From S/N 50842)
Compound Slide (Up to S/N 50842)
Guide Bar
Clamp
Feed Nut
Swivel Nut
Index Screw
Index Knob
Spacer
Index Plate
Swivel Base
Swivel
Swivel Lock Screw
Slide
Slide Lock
Bed Bracket
Cross Slide Extension
Screw Housing
Stud
Crossfeed Sleeve Gear
Crossfeed Bracket
Gib for Slide Block
Page - 25
ACCESSORIES
TAPER ATTACHMENT (Continued)
LP-2004
LP-2005
LP-2006
LP-2007
LP-2008
LP-2009
LP-2010
LP-2042
2364
2359
6335
7348
6337
2350
6329
2370
Swivel Pin
Gib for Slide Block
Crossfeed Sleeve Gear (14" Lathe)
Cross Slide Extension (14" Lathe)
Bed Bracket
Telescopic Taper Attachment Complete - 2500 Series 12" Lathe
Telescopic Taper Attachment Complete - 6500 Series 14" Lathe
Thrust Washer
COLLET ATTACHMENT
LP-1670
LP-1671
LP-1675
LP-1676
LP-1677
LP-1678
LP-1681
LP-1764
LP-1765
LP-1842
AC-155
AC-152
AC-369-1
AC-370
AC-365-1
AC-373-1
AC-366-1
AC-160
AC-162
LA-1056
Handwheel Draw Tube (#3AT Collets)
Handwheel Collet Attachment (10" Lathes)
Finger Closer
Bearing Ring
Finger Housing
Lock Ring (2-7/16" Dia.)
Finger
#3AT Collet Adapter (9" & 10" Lathe)
LP-1854
LP-1855
LP-1894
LP-1899
LP-1900
LP-1919
LP-1925
LP-2000
LP-2017
LP-2019
LP-2020
LP-2021
LP-2022
LP-2023
LP-2024
LP-2025
LP-2032
LA-1055
LA-1055-1
AC-164
AC-368
LA-248
7953
7954
AC-174
LA-1052
2381
LA-1053
LA-1054
AC-252
2396
2636
2391
AC-163
3 45' to 5-C Collet Adapter (To Serial #52576)
o
2 to 5-C Collet Adapter (From Serial #52576)
Draw Bar Sleeve
Locking Screw
Spring
Finger Housing
Cover
Draw Tube (10" Lathes w/ Production Collet)
Draw Tube (11" Lathes w/ Handwheel Collet)
Draw Tube (12" Lathes w/ Handwheel Collet)
Tapered Bushing
Fiber Washer
Handwheel (9" & 10" Lathes)
Draw Tube (12" L-00 Lathes w/ Production Collet)
Draw Tube (14" Lathes w/ Production Collet)
Draw Tube (12" L-00 Lathes w/ Handwheel Collet)
Fiber Washer (9" & 10" Lathes w/ Handwheel Collet)
o
CARRIAGE STOPS
For 9”, 10” 11” and 12” Logan Lathes (Call for stops for 14” Lathes)
LP-1624
AC-225
Single
LP-1626
AC-234
Micrometer Stop
Page - 26
ACCESSORIES
CHUCKS
Part Number
Q23-03735
78050653
Q23-03736
Q23-03737
Q23-03738
Q23-03739
Q23-03740
Q23-03741
Q23-03742
Q23-03743
Q23-03744
Q23-03745
Q23-03746
Q23-03747
Q23-03748
Q23-03782
Chuck Size
6 ¼”
6 ¼”
6 ¼”
8”
6 ¼”
8”
6 ¼”
8”
6”
8”
10”
8”
10”
8”
10”
6”
Number of Jaws
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
3
Chuck Mount
1½ - 8
2¼ - 8
Plain Back
Plain Back
L-00
L-00
L-0
L-0
Plain Back
Plain Back
Plain Back
L-00
L-00
L-0
L-0
“SET-TRU” Style
Plain Back Chucks require Mounting Plate, which must be finish machined on your
Lathe. This insures the greatest accuracy.
LP-1463
Mounting Plate, 6-3/8” Dia, 1 ½-8 Thread
LP-1464
Mounting Plate, 6 3/8” Dia, 2 ¼-8 Thread
LP-2269
Mounting Plate for 6” “SET-TRU” style Chucks, 2¼-8 Thread
LP-2343
Mounting Plate for 6” “SET-TRU” style Chucks, 1½-8 Thread
7-876-064
Mounting Plate for 6” “SET-TRU” style Chucks, 2 3/16-10 Thread
7-879-9061 Mounting Plate for 6” “SET-TRU” style Chucks, L-00 Spindle
Many other Chucks and adapters also available – CALL/FAX/EMAIL
Page - 27
METRIC THREADING ON LOGAN LATHES
Must include 100 T. and 127 T. Transposing Gears (Accurate)
or may use 37 T. and 47 T. Transposing Gears (2/100 of 1% Inaccuracy)
Caution
When cutting metric threads, the Half-Nut cannot be disengaged.
Reverse the spindle direction after retracting the tool at the end of the cut
For 9”, 10”, 11” and 2900 Series 12”
Logan Lathes
For 2500 Series 12” and 14” Logan
Lathes
100 T
127 T
LP-1056
LP-1057
LP-1071
LP-1072
37 T
47 T
LP-1665
LP-1666
N/A
N/A
Lathes with Quick Change Gear Box:
MM Pitch=(40/Gearbox Setting) X (Stud Gear/Gear Box Gear)
Plain Change Lathes (without Gear Box):
MM Pitch=2.5 X (Stud Gear/Lead Screw Gear)
MM Pitch
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.60
0.65
0.70
0.75
0.80
0.90
1.00
1.20
1.25
1.30
1.40
1.50
1.75
2.00
2.25
2.50
2.75
3.00
3.50
4.00
4.50
5.00
5.50
6.00
QC Lathes
(60T Gearbox Gear)
Gear Box
Stud Gear
Setting
48
48
72
42
48
54
48
72
39
42
72
48
54
48
72
60
39
42
72
42
48
54
60
66
72
42
48
54
60
66
72
(Typical Diagrams
on Next Page)
Plain Change Lathes
Stud Gear
(Driver)
Driven
Driver
Driven
Screw Gear
32
40
48
56
16
18
20
24
26
28
24
30
36
40
48
40
52
56
48
56
32
36
32
44
48
28
32
36
40
44
48
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
127 (or 47)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
100 (or 37)
72
72
72
72
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
72
72
72
72
72
72
72
72
72
72
72
100
100
100
100
100
100
100
100
100
100
80
100
100
100
100
80
100
100
80
80
40
40
32
40
40
20
20
20
20
20
20
160
128
160
80
80
80
64
80
40
40
64
40
40
32
40
32
20
20
32
16
16
16
16
16
16
8
8
8
8
8
8
Note: * indicates ISO Standard Metric Pitches.
Page - 28
METRIC THREADING ON LOGAN LATHES
Page - 29
NEW PRODUCTS!
Quick Change Tool Posts and Sets
Your choice, piston or wedge style. Piston style for economy, Wedge style for maximum
rigidity and accuracy.
Both accept the industry standard toolholders, and interchange with Aloris™ and other
tooling.
Exclusive from LOGAN ACTUATOR CO.: Upon request,
we will machine the T-Nut to fit your LOGAN lathe at NO
ADDITIONAL CHARGE. For lathes OTHER than Logan,
a blank nut is provided which can be machined by the user to
fit your T-Slot.
Piston Style Tool Sets
Stock #
Q23-03786
Q23-03828
Swing
Used on:
9” to 12” For all Logan 9” to 12” Lathes
10” to 15” For Logan 12” or 14” Lathes
Wedge Style Tool Sets
Stock #
Q23-03827
Q23-03829
Swing
Used on:
9” to 12” For all Logan 9” to 12” Lathes
10” to 15” For Logan 12” or 14” Lathes
All sets include Toolpost and 5 holders: 1 turning/facing (250x01), 1 turning/facing/boring (250-x02), 1 heavy-duty boring bar
(250-x04), 1 cut-off blade holder (250-x07) and 1 knurling/facing
holder, including medium diamond knurls (250-x10). Replace the x
with the series of your toolpost (1=100 series, 2=200 series)
Q23-03786
Q23-03828
PH2-250-100
PH2-250-101
PH2-250-201
$199
$230
$128
$31
$33
Q23-03827
Q23-03829
PH2-250-111
PH2-250-102
PH2-250-202
$249
$299
$169
$32
$36
Page - 30
Master Precision Levels
The first, and perhaps most important step in setting up a lathe to cut accurately, is to insure there is no twist in
the bed. This is normally done by the use of a precision level, which must be accurate to much higher standards
than a common machinist’s or carpenter’s level.
We now have available Master Precision Levels, graduated to 0.0005” per 10”. Available in either 8” or 12”
lengths, these levels are supplied in a fitted wooden case for safe storage.
Q30-03799 (8”) $233.00
Q30-03800 (12”) $281.50
5 Piece Mini Toolholder and Boring Bar Set
Q23-03823
$229.50
Each Set Includes:
A Quality Storage Case
4 Toolholders as Listed Below
1 SI-SCLCR Boring Bar
1 Wrench
2 Spare Screws
10 TiN Inserts
o 4 pieces: 6-CCM-211LA CCMT
o 4 pieces: 6-DCM-211LA DCMT
o 2 pieces: 6-SCM-211LA SCMT
Page - 31
NEW PRODUCT AVAILABILITY
5C Collet Chucks
For Mounting With Adapter Plates
6000 R.P.M.
The 5C Collet Chucks are designed for use with all 5C Collets. They
can be used for turning, facing, boring, grinding and milling operations
on lathes and grinding machines. The simple key operated scroll
provides a uniform, distortion free clamping of workpieces and low
collet exchange times. Their simple design, rugged construction and
fine workmanship assure high quality and long service life.
BODY - made of high quality FORGED STEEL.
FORGED SCROLL - fully hardened and ground for longer life.
PINIONS - hardened and ground.
5-C adjustable collet stop for the 5C Collet Chuck are available.
Standard Accessories:
1 Chuck Wrench, 1 set of mounting bolts, 1 Hex Key.
Collets not included, available separately.
Prices
7-862-0501
LP-1463
LP-1464
5” Collet Chuck, Std
1½-8 Threaded Adapter
2¼-8 Threaded Adapter
$511.25
$126.75
$161.50
Page - 32
Super Precision 5C Collet Chucks
With Fine Adjustment
For Mounting With Adapter Plates
0.0004” T.I.R. and 6000 R.P.M.
The Super Precision 5C Collet Chucks are designed for use with all 5C
collets. They can be used for turning, facing, boring, grinding and
milling operations on center lathes and grinding machines. The simple
key operated scroll provides a uniform, distortion free clamping of the
workpiece and low collet exchange time.
Four fine adjustment screws are used to set up the chuck on its
mounting plate to get precision within .0004" T.I.R on duplicate parts.
Outstanding accuracy, low cost, versatility and long life make BISON 5"
5-C SET-TRU Chucks invaluable in the workshop and indispensable in
the toolroom.
BODY - made of high quality FORGED STEEL.
FORGED SCROLL - fully hardened & ground for longer life.
PINIONS - hardened and ground.
Standard Accessories:
1 Chuck Wrench, 1 set of mounting bolts, 1 Hex Key.
Collets not included, available separately.
Prices
7-862-0505
7-876-052
7-876-056
5” Collet Chuck, Adj
1½-8 Threaded Adapter
2¼-8 Threaded Adapter
$759.25
$178.00
$178.00
Page - 33
THE FOLLOWING BOOKS ARE STILL AVAILABLE FROM STOCK!
Great instruction on the proper use of lathes in general
Page - 34
T-SHIRTS
6.1 oz all cotton Navy T-Shirt, emblazoned with the Logan Logo on
the back and on the front, show off your love of Logan Lathes with a
picture of a classic Logan Lathe.
And keep our favorite reminder close to your heart,
Measure Twice, Cut Once!
$18.00 each
Sizes Large, X-Large, XXL and 3XL
Machine Wash Cold to preserve the screenprinting
LOGAN ACTUATOR CO.
550 Chippewa Rd
Harvard Illinois 60033
Tel (815) 943-9500
Fax (815) 943-6755
E-Mail: [email protected]
LOGAN ACTUATOR CO.
LATHE PARTS PRICE LIST
November 2012
LOGAN ACTUATOR CO.
550 Chippewa Rd
Harvard IL 60033
Tel (815) 943-9500 Fax (815) 943-6755
[email protected]
Page - 2
PRICES SUBJECT TO CHANGE WITHOUT NOTICE – FOB EX FACTORY
Nov 2012
HOW TO ORDER REPAIR PARTS
Should you need repair parts for your lathe the following information is necessary to fill your
order promptly and correctly.
1. Complete name and number of the part as listed in the parts list.
2. Model and Serial Number of your lathe.
Serial number is stamped on top of the front way at the right end of the lathe.
Logan Lathe Part Numbers beginning with Q, P, or 0 are also available from stock.
All returns may be subject to a 15% restocking fee – No refunds after 30 days.
Nov 2012
LP-1001
LP-1002
LP-1003
LP-1004
LP-1005
LP-1006
LP-1007
LP-1008
LP-1009
LP-1010
LP-1011
LP-1012
LP-1013
LP-1014
LP-1015
LP-1016
LP-1017
LP-1018
LP-1019
LP-1020
LP-1021
LP-1022
LP-1023
LP-1024
LP-1025
LP-1026
LP-1027
LP-1028
LP-1029
LP-1030
LP-1031
LP-1032
LP-1033
LP-1034
LP-1035
LP-1036
LP-1037
LP-1038
LP-1039
LP-1040
LP-1041
LP-1042
LP-1043
LP-1044
LP-1045
LP-1046
LP-1047
LP-1048
LP-1049
LP-1050
199.25
53.50
65.75
53.50
57.00
57.00
59.00
59.00
59.00
62.50
65.75
82.00
51.75
220.25
220.25
67.75
60.50
60.50
65.75
64.25
67.75
65.75
62.50
80.25
85.50
82.00
62.50
82.00
85.50
44.75
48.00
60.50
80.50
85.50
92.50
101.25
82.50
108.50
117.50
121.00
126.25
133.50
142.25
158.25
LP-1051
LP-1052
LP-1053
LP-1054
LP-1055
LP-1056
LP-1057
LP-1058
LP-1059
LP-1060
LP-1061
LP-1062
LP-1063
LP-1064
LP-1065
LP-1066
LP-1067
LP-1068
LP-1069
LP-1070
LP-1071
LP-1072
LP-1073
LP-1074
LP-1075
LP-1076
LP-1077
LP-1078
LP-1079
LP-1080
LP-1081
LP-1082
LP-1083
LP-1084
LP-1085
LP-1086
LP-1087
LP-1088
LP-1089
LP-1090
LP-1091
LP-1092
LP-1093
LP-1094
LP-1095
LP-1096
LP-1097
LP-1098
LP-1099
LP-1100
55.25
55.25
72.75
70.50
143.00
255.75
270.25
71.50
98.00
154.50
87.25
98.00
89.00
92.50
106.75
129.75
85.50
154.50
183.00
142.75
255.75
296.75
154.50
92.50
158.25
199.25
9.25
64.25
108.50
23.00
71.25
65.50
154.50
154.50
167.00
223.75
78.25
78.25
80.25
80.25
82.00
215.00
174.25
LP-1101
LP-1102
LP-1103
LP-1104
LP-1105
LP-1106
LP-1107
LP-1108
LP-1109
LP-1110
LP-1111
LP-1112
LP-1113
LP-1114
LP-1115
LP-1116
LP-1117
LP-1118
LP-1119
LP-1120
LP-1121
LP-1122
LP-1123
LP-1124
LP-1125
LP-1126
LP-1127
LP-1128
LP-1129
LP-1130
LP-1131
LP-1132
LP-1133
LP-1134
LP-1135
LP-1136
LP-1137
LP-1138
LP-1139
LP-1140
LP-1141
LP-1142
LP-1143
LP-1144
LP-1145
LP-1146
LP-1147
LP-1148
LP-1149
LP-1150
98.00
7.25
7.00
163.75
186.50
184.75
371.25
286.00
286.00
245.25
275.50
248.00
266.50
51.75
89.00
154.50
140.50
380.25
98.00
14.00
73.00
82.00
119.00
73.00
371.25
165.25
199.25
59.25
103.25
82.00
215.00
205.50
129.75
146.00
83.50
87.25
46.50
103.25
113.75
18.00
98.00
32.25
62.50
61.75
67.25
Page - 3
LP-1151
LP-1152
LP-1153
LP-1154
LP-1155
LP-1156
LP-1157
LP-1158
LP-1159
LP-1160
LP-1161
LP-1162
LP-1163
LP-1164
LP-1165
LP-1166
LP-1167
LP-1168
LP-1169
LP-1170
LP-1171
LP-1172
LP-1173
LP-1174
LP-1175
LP-1176
LP-1177
LP-1178
LP-1179
LP-1180
LP-1181
LP-1182
LP-1183
LP-1184
LP-1185
LP-1186-1
LP-1187
LP-1188
LP-1189
LP-1190
LP-1191
LP-1192
LP-1193
LP-1194
LP-1195
LP-1196
LP-1197
LP-1198
LP-1199
LP-1200
72.25
75.00
77.75
83.25
89.00
77.75
77.75
57.25
304.50
158.25
101.25
67.75
107.75
143.00
144.00
213.25
46.50
248.75
63.25
129.75
16.25
268.25
82.00
16.25
41.00
34.25
9.25
222.25
149.25
92.50
64.25
87.25
48.00/53.75
51.00/56.25
52.00/58.50
58.50
25.00
113.75
62.50
174.25
39.25
571.75
7.25
47.00
34.00
9.25
80.25
364.75
433.50
6.00
Page - 4
LP-1201
LP-1202
LP-1203
LP-1204
LP-1205
LP-1206
LP-1207
LP-1208
LP-1209
LP-1210
LP-1211
LP-1212
LP-1213
LP-1214
LP-1215
LP-1216
LP-1217
LP-1218
LP-1219
LP-1220
LP-1221
LP-1222
LP-1223
LP-1224
LP-1225
LP-1226
LP-1227
LP-1228
LP-1229
LP-1230
LP-1231
LP-1232
LP-1233
LP-1234
LP-1235
LP-1236
LP-1237
LP-1238
LP-1239
LP-1240
LP-1241
LP-1242
LP-1243
LP-1244
LP-1245
LP-1246
LP-1247
LP-1248
LP-1249
LP-1250
51.75
42.50
144.00
18.00
421.00
8.75
85.50
435.00
27.00
220.25
255.75
179.00
82.00
5.75
46.50
48.00
30.25
106.75
365.50
60.50
32.25
16.50
5.75
24.25
21.50
25.00
5.75
59.00
60.00
89.00
154.50
32.25
37.50
5.75
13.50
224.00
34.00
30.25
44.75
12.50
32.25
21.50
25.00
39.25
17.50
18.00
53.50
LP-1251
LP-1252
LP-1253
LP-1254
LP-1255
LP-1256
LP-1257
LP-1258
LP-1259
LP-1260
LP-1261
LP-1262
LP-1263
LP-1264
LP-1265
LP-1266
LP-1267
LP-1268
LP-1269
LP-1270
LP-1271
LP-1272
LP-1273
LP-1274
LP-1275
LP-1276
LP-1277
LP-1278
LP-1279
LP-1280
LP-1281
LP-1282
LP-1283
LP-1284
LP-1285
LP-1286
LP-1287
LP-1288
LP-1289
LP-1290
LP-1291
LP-1292
LP-1293
LP-1294
LP-1295
LP-1296
LP-1297
LP-1297-3
LP-1298
LP-1299
LP-1300
23.50
188.25
39.25
42.50
41.25
82.25
236.25
44.75
41.25
7.25
19.75
5.75
113.25
117.50
138.75
14.50
7.00
67.75
37.50
37.50
41.25
37.50
17.00
18.00
48.00
25.00
25.00
35.00
77.00
94.25
67.00
113.75
67.00
117.50
125.25
24.00
37.50
29.25
348.00
353.25
7.00
12.50
102.75
LP-1301
LP-1302
LP-1303
LP-1304
LP-1305
LP-1306
LP-1307
LP-1308
LP-1309
LP-1310
LP-1311
LP-1312
LP-1313
LP-1314
LP-1315
LP-1316
LP-1317
LP-1318
LP-1319
LP-1320
LP-1321
LP-1322
LP-1323
LP-1324
LP-1325
LP-1326
LP-1327
LP-1328
LP-1329
LP-1330
LP-1331
LP-1332
LP-1333
LP-1334
LP-1335
LP-1336
LP-1337
LP-1338
LP-1339
LP-1340
LP-1341
LP-1342
LP-1343
LP-1344
LP-1345
LP-1346
LP-1347
LP-1348
LP-1349
LP-1350
110.75
27.00
1,023.75
34.00
71.25
35.75
10.75
183.25
27.00
122.75
116.75
7.00
117.50
53.50
19.75
21.50
19.75
7.25
18.00
147.50
16.25
67.00
44.75
59.00
27.75
41.25
232.50
101.25
50.00
60.50
16.00
5.75
7.00
144.75
38.25
170.50
170.50
64.25
10.25
201.25
3.75
73.00
3.75
195.00
121.00
Nov 2012
LP-1351
LP-1352
LP-1353
LP-1354
LP-1355
LP-1356
LP-1357
LP-1358
LP-1359
LP-1360
LP-1361
LP-1362
LP-1363
LP-1364
LP-1365
LP-1366
LP-1367
LP-1368
LP-1369
LP-1370
LP-1371
LP-1372
LP-1373
LP-1374
LP-1375
LP-1376
LP-1377
LP-1378
LP-1379
LP-1380
LP-1381
LP-1382
LP-1383
LP-1384
LP-1385
LP-1386
LP-1387
LP-1388
LP-1389
LP-1390
LP-1391
LP-1392
LP-1393
LP-1394
LP-1395
LP-1396
LP-1397
LP-1398
LP-1399
LP-1400
59.00
78.75
3.75
3.75
30.25
37.50
27.00
18.00
18.00
5.75
32.25
39.25
23.50
27.00
78.75
96.00
7.00
51.75
21.50
25.00
19.50
21.50
506.00
174.25
160.00
11.00
227.50
563.00
42.50
53.50
51.50
223.75
223.75
223.75
11.00
25.00
46.50
19.75
117.50
73.50
25.00
10.75
85.00
7.00
6.00
10.75
92.50
101.50
21.50
Nov 2012
LP-1401
LP-1402
LP-1403
LP-1404
LP-1405
LP-1406
LP-1407
LP-1408
LP-1409
LP-1410
LP-1411
LP-1412
LP-1413
LP-1414
LP-1415
LP-1416
LP-1417
LP-1418
LP-1419
LP-1420
LP-1421
LP-1422
LP-1423
LP-1424
LP-1425
LP-1426
LP-1427
LP-1428
LP-1429
LP-1430
LP-1431
LP-1432
LP-1433
LP-1434
LP-1435
LP-1436
LP-1437
LP-1438
LP-1439
LP-1440
LP-1441
LP-1442
LP-1443
LP-1444
LP-1445
LP-1446
LP-1447
LP-1448
LP-1449
LP-1450
18.00
18.00
6.50
11.00
44.75
38.25
50.50
113.00
64.25
46.50
7.25
67.75
10.25
113.50
301.00
268.25
138.75
32.25
25.50
10.75
86.00
279.00
19.00
13.50
20.75
13.50
19.50
8.50
13.50
8.50
6.00
29.25
78.00
LP-1451
LP-1452
LP-1453
LP-1454
LP-1455
LP-1456
LP-1457
LP-1458
LP-1459
LP-1460
LP-1461
LP-1462
LP-1463
LP-1464
LP-1465
LP-1466
LP-1467
LP-1468
LP-1469
LP-1470
LP-1471
LP-1472
LP-1473
LP-1474
LP-1475
LP-1476
LP-1477
LP-1478
LP-1479
LP-1480
LP-1481
LP-1482
LP-1483
LP-1484
LP-1485
LP-1486
LP-1487
LP-1488
LP-1489
LP-1490
LP-1491
LP-1492
LP-1493
LP-1494
LP-1495
LP-1496
LP-1497
LP-1498
LP-1499
LP-1500
168.75
234.50
55.50
40.25
55.00
3.75
163.75
64.75
16.25
39.25
286.00
126.75
161.50
10.75
132.00
120.00
106.75
23.50
5.75
25.00
23.00
111.50
279.00
71.25
147.50
42.50
234.75
33.75
43.00
48.00
34.00
296.75
30.50
5.75
11.25
5.75
11.25
257.75
213.25
LP-1501
LP-1502
LP-1503
LP-1504
LP-1505
LP-1506
LP-1507
LP-1508
LP-1509
LP-1510
LP-1511
LP-1512
LP-1513
LP-1514
LP-1515
LP-1516
LP-1517
LP-1518
LP-1519
LP-1520
LP-1521
LP-1522
LP-1523
LP-1524
LP-1525
LP-1526
LP-1527
LP-1528
LP-1529
LP-1530
LP-1531
LP-1532
LP-1533
LP-1534
LP-1535
LP-1536
LP-1537
LP-1538
LP-1539
LP-1540
LP-1541
LP-1542
LP-1543
LP-1544
LP-1545
LP-1546
LP-1547
LP-1548
LP-1549
LP-1550
27.00
6.50
137.75
159.25
76.25
242.00
73.25
25.50
73.00
113.75
74.50
80.25
18.00
314.75
5.75
12.50
320.75
305.75
392.50
315.25
353.25
30.25
33.25
546.75
169.00
188.25
296.75
34.00
94.25
203.75
76.50
279.50
394.25
74.75
245.25
403.25
50.00
183.00
Page - 5
LP-1551
LP-1552
LP-1553
LP-1554
LP-1555
LP-1556
LP-1557
LP-1558
LP-1559
LP-1560
LP-1561
LP-1562
LP-1563
LP-1564
LP-1565
LP-1566
LP-1567
LP-1568
LP-1569
LP-1570
LP-1571
LP-1572
LP-1573
LP-1574
LP-1575
LP-1576
LP-1577
LP-1578
LP-1579
LP-1580
LP-1581
LP-1582
LP-1583
LP-1584
LP-1585
LP-1586
LP-1587
LP-1588
LP-1589
LP-1590
LP-1591
LP-1592
LP-1593
LP-1594
LP-1595
LP-1596
LP-1597
LP-1598
LP-1599
LP-1600
136.75
99.75
589.50
571.75
37.50
29.25
307.50
57.00
14.75
54.25
32.00
10.50
320.75
270.25
274.50
75.00
21.50
42.50
348.25
535.75
95.00
107.25
11.00
18.00
19.75
149.75
80.25
263.50
Page - 6
LP-1601
LP-1602
LP-1603
LP-1604
LP-1605
LP-1606
LP-1607
LP-1608
LP-1609
LP-1610
LP-1611
LP-1612
LP-1613
LP-1614
LP-1615
LP-1616
LP-1617
LP-1618
LP-1619
LP-1620
LP-1621
LP-1622
LP-1623
LP-1624
LP-1625
LP-1626
LP-1627
LP-1628
LP-1629
LP-1630
LP-1631
LP-1632
LP-1633
LP-1634
LP-1635
LP-1636
LP-1637
LP-1638
LP-1639
LP-1640
LP-1641
LP-1642
LP-1643
LP-1644
LP-1645
LP-1646
LP-1647
LP-1648
LP-1649
LP-1650
980.00
992.50
1,013.75
454.00
81.75
126.75
131.50
484.75
176.00
158.75
201.50
278.00
188.25
12.50
32.25
51.75
25.50
122.75
10.75
289.50
197.25
23.00
LP-1651
LP-1652
LP-1653
LP-1654
LP-1655
LP-1656
LP-1657
LP-1658
LP-1659
LP-1660
LP-1661
LP-1662
LP-1663
LP-1664
LP-1665
LP-1666
LP-1667
LP-1668
LP-1669
LP-1670
LP-1671
LP-1672
LP-1673
LP-1674
LP-1675
LP-1676
LP-1677
LP-1678
LP-1679
LP-1680
LP-1681
LP-1682
LP-1683
LP-1684
LP-1685
LP-1686
LP-1687
LP-1688
LP-1689
LP-1690
LP-1691
LP-1692
LP-1693
LP-1694
LP-1695
LP-1696
LP-1697
LP-1698
LP-1699
LP-1700
27.25
123.25
71.25
85.75
180.25
508.75
29.25
48.25
34.75
75.00
92.50
68.50
84.25
180.25
200.75
680.00
198.25
110.25
490.00
133.50
436.00
205.75
55.00
15.00
83.00
60.25
14.50
16.00
56.75
45.25
870.75
151.25
1,535.50
1,085.00
378.25
LP-1701
LP-1702
LP-1703
LP-1704
LP-1705
LP-1706
LP-1707
LP-1708
LP-1709
LP-1710
LP-1711
LP-1712
LP-1713
LP-1714
LP-1715
LP-1716
LP-1717
LP-1718
LP-1719
LP-1720
LP-1721
LP-1722
LP-1723
LP-1724
LP-1725
LP-1726
LP-1727
LP-1728
LP-1729
LP-1730
LP-1731
LP-1732
LP-1733
LP-1734
LP-1735
LP-1736
LP-1737
LP-1738
LP-1739
LP-1740
LP-1741
LP-1742
LP-1743
LP-1744
LP-1745
LP-1746
LP-1747
LP-1748
LP-1749
LP-1750
563.00
113.75
333.25
333.25
138.25
51.75
21.75
10.25
33.25
33.25
22.75
75.00
33.00
172.00
62.50
1,044.00
64.25
408.50
11.00
12.50
129.75
193.75
251.00
305.75
343.00
144.00
138.75
78.25
405.00
135.25
122.75
323.25
92.50
16.25
15.25
15.25
25.50
Nov 2012
LP-1751
LP-1752
LP-1753
LP-1754
LP-1755
LP-1756
LP-1757
LP-1758
LP-1759
LP-1760
LP-1761
LP-1762
LP-1763
LP-1764
LP-1765
LP-1766
LP-1767
LP-1768
LP-1769
LP-1770
LP-1771
LP-1772
LP-1773
LP-1774
LP-1775
LP-1776
LP-1777
LP-1778
LP-1779
LP-1780
LP-1781
LP-1782
LP-1783
LP-1784
LP-1785
LP-1786
LP-1787
LP-1788
LP-1789
LP-1790
LP-1791
LP-1792
LP-1793
LP-1794
LP-1795
LP-1796
LP-1797
LP-1798
LP-1799
LP-1800
186.50
343.00
122.75
19.50
70.50
16.00
305.75
89.00
125.25
195.50
30.25
387.25
30.25
23.50
30.25
27.75
23.00
101.25
59.00
16.25
27.00
58.75
104.00
18.00
50.00
57.00
Nov 2012
LP-1801
LP-1802
LP-1803
LP-1804
LP-1805
LP-1806
LP-1807
LP-1808
LP-1809
LP-1810
LP-1811
LP-1812
LP-1813
LP-1814
LP-1815
LP-1816
LP-1817
LP-1818
LP-1819
LP-1820
LP-1821
LP-1822
LP-1823
LP-1824
LP-1825
LP-1826
LP-1827
LP-1828
LP-1829
LP-1830
LP-1831
LP-1832
LP-1833
LP-1834
LP-1835
LP-1836
LP-1837
LP-1838
LP-1839
LP-1840
LP-1841
LP-1842
LP-1843
LP-1844
LP-1845
LP-1846
LP-1847
LP-1848
LP-1849
LP-1850
62.50
188.00
25.00
304.25
189.00
269.00
95.50
147.75
294.75
6.00
64.75
121.75
129.25
1,450.50
279.00
20.75
146.00
11.50
378.25
465.25
298.75
94.25
38.25
373.00
133.50
49.25
25.50
69.00
119.75
69.00
43.00
51.50
LP-1851
LP-1852
LP-1853
LP-1854
LP-1855
LP-1856
LP-1857
LP-1858
LP-1859
LP-1860
LP-1861
LP-1862
LP-1863
LP-1864
LP-1865
LP-1866
LP-1867
LP-1868
LP-1869
LP-1870
LP-1871
LP-1872
LP-1873
LP-1874
LP-1875
LP-1876
LP-1877
LP-1878
LP-1879
LP-1880
LP-1881
LP-1882
LP-1883
LP-1884
LP-1885
LP-1886
LP-1887
LP-1888
LP-1889
LP-1890
LP-1891
LP-1892
LP-1893
LP-1894
LP-1895
LP-1896
LP-1897
LP-1898
LP-1899
LP-1900
96.75
240.00
307.25
101.00
3.75
186.50
258.00
21.00
250.50
170.50
271.75
246.75
53.25
82.00
186.50
122.75
62.50
63.75
48.25
33.00
54.25
139.75
74.75
42.50
53.75
32.25
34.75
130.25
151.25
36.00
52.75
42.50
21.50
44.50
96.75
94.75
62.25
27.00
6.25
LP-1901
LP-1902
LP-1903
LP-1904
LP-1905
LP-1906
LP-1907
LP-1908
LP-1909
LP-1910
LP-1911
LP-1912
LP-1913
LP-1914
LP-1915
LP-1916
LP-1917
LP-1918
LP-1919
LP-1920
LP-1921
LP-1922
LP-1923
LP-1924
LP-1925
LP-1926
LP-1927
LP-1928
LP-1929
LP-1930
LP-1931
LP-1932
LP-1933
LP-1934
LP-1935
LP-1936
LP-1937
LP-1938
LP-1939
LP-1940
LP-1941
LP-1942
LP-1943
LP-1944
LP-1945
LP-1946
LP-1947
LP-1948
LP-1949
LP-1950
248.00
70.00
841.50
22.75
137.25
128.00
594.75
594.75
594.75
594.75
623.00
623.00
33.25
517.00
328.00
33.00
328.00
33.25
40.75
103.25
774.25
82.00
51.75
85.50
138.50
117.50
456.25
375.75
102.50
47.50
527.00
10.25
82.00
104.00
715.75
22.00
99.75
28.75
24.00
Page - 7
LP-1951
LP-1952
LP-1953
LP-1954
LP-1955
LP-1956
LP-1957
LP-1958
LP-1959
LP-1960
LP-1961
LP-1962
LP-1963
LP-1964
LP-1965
LP-1966
LP-1967
LP-1968
LP-1969
LP-1970
LP-1971
LP-1972
LP-1973
LP-1974
LP-1975
LP-1976
LP-1977
LP-1978
LP-1979
LP-1980
LP-1981
LP-1982
LP-1983
LP-1984
LP-1985
LP-1986
LP-1987
LP-1988
LP-1989
LP-1990
LP-1991
LP-1992
LP-1993
LP-1994
LP-1995
LP-1996
LP-1997
LP-1998
LP-1999
LP-2000
7.00
35.75
23.50
519.00
449.25
8.00
8.00
32.25
69.00
48.00
21.50
37.50
60.50
11.25
50.50
22.75
60.25
25.00
87.75
669.50
465.25
32.25
213.25
51.75
163.75
147.50
18.00
72.75
41.25
319.75
195.50
1,674.25
79.00
149.25
Page - 8
LP-2001
LP-2002
LP-2003
LP-2004
LP-2005
LP-2006
LP-2007
LP-2008
LP-2009
LP-2010
LP-2011
LP-2012
LP-2013
LP-2014
LP-2015
LP-2016
LP-2017
LP-2018
LP-2019
LP-2020
LP-2021
LP-2022
LP-2023
LP-2024
LP-2025
LP-2026
LP-2027
LP-2028
LP-2029
LP-2030
LP-2031
LP-2032
LP-2033
LP-2034
LP-2035
LP-2036
LP-2037
LP-2038
LP-2039
LP-2040
LP-2041
LP-2042
LP-2043
LP-2044
LP-2045
LP-2046
LP-2047
LP-2048
LP-2049
LP-2050
25.00
12.00
18.00
1,879.50
2,668.00
644.50
440.50
113.75
277.00
313.00
119.00
6.25
52.75
342.25
342.25
353.25
18.25
23.50
7.00
168.50
9.25
28.75
12.50
17.25
57.00
469.00
153.00
328.75
354.50
82.25
LP-2051
LP-2052
LP-2053
LP-2054
LP-2055
LP-2056
LP-2057
LP-2058
LP-2059
LP-2060
LP-2061
LP-2062
LP-2063
LP-2064
LP-2065
LP-2066
LP-2067
LP-2068
LP-2069
LP-2070
LP-2071
LP-2072
LP-2073
LP-2074
LP-2075
LP-2076
LP-2077
LP-2078
LP-2079
LP-2080
LP-2081
LP-2082
LP-2083
LP-2084
LP-2085
LP-2086
LP-2087
LP-2088
LP-2089
LP-2090
LP-2091
LP-2092
LP-2093
LP-2094
LP-2095
LP-2096
LP-2097
LP-2098
LP-2099
LP-2100
3,886.50
30.50
30.50
1,778.25
127.25
12.50
64.25
80.25
69.25
17.00
192.50
195.50
189.50
786.50
910.50
41.25
609.00
200.75
51.75
146.00
90.50
85.00
116.25
121.75
21.50
69.50
104.25
326.25
102.25
62.25
11.75
141.00
LP-2101
LP-2102
LP-2103
LP-2104
LP-2105
LP-2106
LP-2107
LP-2108
LP-2109
LP-2110
LP-2111
LP-2112
LP-2113
LP-2114
LP-2115
LP-2116
LP-2117
LP-2118
LP-2119
LP-2120
LP-2121
LP-2122
LP-2123
LP-2124
LP-2125
LP-2126
LP-2127
LP-2128
LP-2129
LP-2130
LP-2131
LP-2132
LP-2133
LP-2134
LP-2135
LP-2136
LP-2137
LP-2138
LP-2139
LP-2140
LP-2141
LP-2142
LP-2143
LP-2144
LP-2145
LP-2146
LP-2147
LP-2148
LP-2149
LP-2150
276.00
68.00
390.00
92.50
184.25
240.00
11.25
35.75
50.25
105.50
254.25
112.00
90.25
46.75
34.75
74.75
16.75
36.25
131.50
49.25
254.75
40.50
133.50
92.50
107.75
Nov 2012
LP-2151
LP-2152
LP-2153
LP-2154
LP-2155
LP-2156
LP-2157
LP-2158
LP-2159
LP-2160
LP-2161
LP-2162
LP-2163
LP-2164
LP-2165
LP-2166
LP-2167
LP-2168
LP-2169
LP-2170
LP-2171
LP-2172
LP-2173
LP-2174
LP-2175
LP-2176
LP-2177
LP-2178
LP-2179
LP-2180
LP-2181
LP-2182
LP-2183
LP-2184
LP-2185
LP-2186
LP-2187
LP-2188
LP-2189
LP-2190
LP-2191
LP-2192
LP-2193
LP-2194
LP-2195
LP-2196
LP-2197
LP-2198
LP-2199
LP-2200
95.00
14.75
25.00
7.50
10.75
21.75
112.25
95.00
180.25
63.75
220.50
57.00
137.25
90.25
119.00
151.25
162.25
117.75
21.25
102.50
19.50
195.50
91.50
574.00
94.50
34.25
132.00
132.25
158.25
39.25
82.50
Nov 2012
LP-2201
LP-2202
LP-2203
LP-2204
LP-2205
LP-2206
LP-2207
LP-2208
LP-2209
LP-2210
LP-2211
LP-2212
LP-2213
LP-2214
LP-2215
LP-2216
LP-2217
LP-2218
LP-2219
LP-2220
LP-2221
LP-2222
LP-2223
LP-2224
LP-2225
LP-2226
LP-2227
LP-2228
LP-2229
LP-2230
LP-2231
LP-2232
LP-2233
LP-2234
LP-2235
LP-2236
LP-2237
LP-2238
LP-2239
LP-2240
LP-2241
LP-2242
LP-2243
LP-2244
LP-2245
LP-2246
LP-2247
LP-2248
LP-2249
LP-2250
109.50
220.75
188.00
209.50
177.50
14.75
15.25
123.25
273.50
41.25
12.50
87.00
43.75
54.25
38.25
12.75
198.00
335.50
61.25
30.00
231.00
149.25
32.00
LP-2251
LP-2252
LP-2253
LP-2254
LP-2255
LP-2256
LP-2257
LP-2258
LP-2259
LP-2260
LP-2261
LP-2262
LP-2263
LP-2264
LP-2265
LP-2266
LP-2267
LP-2268
LP-2269
LP-2270
LP-2271
LP-2272
LP-2273
LP-2274
LP-2275
LP-2276
LP-2277
LP-2278
LP-2279
LP-2280
LP-2281
LP-2282
LP-2283
LP-2284
LP-2285
LP-2286
LP-2287
LP-2288
LP-2289
LP-2290
LP-2291
LP-2292
LP-2293
LP-2294
LP-2295
LP-2296
LP-2297
LP-2298
LP-2299
LP-2300
10.75
319.75
14.75
14.75
111.50
196.25
14.75
37.25
38.25
41.25
246.00
230.75
66.75
83.00
333.25
116.75
LP-2301
LP-2302
LP-2303
LP-2304
LP-2305
LP-2306
LP-2307
LP-2308
LP-2309
LP-2310
LP-2311
LP-2312
LP-2313
LP-2314
LP-2315
LP-2316
LP-2317
LP-2318
LP-2319
LP-2320
LP-2321
LP-2322
LP-2323
LP-2324
LP-2325
LP-2326
LP-2327
LP-2328
LP-2329
LP-2330
LP-2331
LP-2332
LP-2333
LP-2334
LP-2335
LP-2336
LP-2337
LP-2338
LP-2339
LP-2340
LP-2341
LP-2342
LP-2343
LP-2344
LP-2345
LP-2346
LP-2347
LP-2348
LP-2349
LP-2350
153.25
49.75
46.00
8.00
24.25
65.75
163.75
1,477.00
184.75
703.25
240.25
11.25
81.00
189.25
99.25
273.50
Page - 9
LP-2351
LP-2352
LP-2353
LP-2354
LP-2355
LP-2356
LP-2357
LP-2358
LP-2359
LP-2360
LP-2361
LP-2362
LP-2363
LP-2364
LP-2365
LP-2366
LP-2367
LP-2368
LP-2369
LP-2370
LP-2371
LP-2372
LP-2373
LP-2374
LP-2375
LP-2376
LP-2377
LP-2378
LP-2379
LP-2380
LP-2381
LP-2382
LP-2383
LP-2384
LP-2385
LP-2386
LP-2387
LP-2388
LP-2389
LP-2390
LP-2391
LP-2392
LP-2393
LP-2394
LP-2395
LP-2396
LP-2397
LP-2398
LP-2399
LP-2400
148.25
41.25
18.25
326.25
305.50
97.00
33.25
21.75
786.50
36.00
930.25
129.75
9.25
Page - 10
LP-2401
LP-2402
LP-2403
LP-2404
LP-2405
LP-2406
LP-2407
LP-2408
LP-2409
LP-2410
LP-2411
LP-2412
LP-2413
LP-2414
LP-2415
LP-2416
LP-2417
LP-2418
LP-2419
LP-2420
LP-2421
LP-2422
LP-2423
LP-2424
LP-2425
LP-2426
LP-2427
LP-2428
LP-2429
LP-2430
LP-2431
LP-2432
LP-2433
LP-2434
LP-2435
LP-2436
LP-2437
LP-2438
LP-2439
LP-2440
LP-2441
LP-2442
LP-2443
LP-2444
LP-2445
LP-2446
LP-2447
LP-2448
LP-2449
LP-2450
LP-2451
388.00
342.50
358.00
420.75
503.00
187.50
187.50
342.50
21.50
19.75
53.25
332.00
64.50
20.50
142.00
42.00
77.00
110.75
24.75
45.25
767.00
148.00
102.50
30.25
145.00
208.50
325.25
313.00
49.00
9.25
28.00
207.00
181.00
219.75
219.75
219.75
30.25
39.25
77.50
11.75
223.75
Q01-00001
Q01-00002
Q01-00003
Q01-00004
Q01-00005
Q01-00007
Q01-00008
Q01-00011
Q01-00015
Q01-00017
Q01-00018
Q01-00019
Q01-00020
Q01-00022
Q01-00026
Q01-00034
Q01-00035
Q01-00036
Q01-00037
Q01-00038
Q01-00039
Q01-00040
Q01-00041
Q01-00043
Q01-00052
Q01-00068
Q01-00070
Q01-00071
Q01-00072
Q01-00074
Q01-00082
Q08-00140
Q08-00143
Q08-00147
Q08-00148
Q08-00154
Q03-00160
Q03-00163
Q02-00242
Q02-00244
Q02-00249
Q02-00251
Q02-00253
Q02-00254
Q02-00255
Q02-00256
Q02-00259
Q02-00260
Q02-00262
Q02-00267
2.75
2.75
2.75
2.75
3.50
3.50
2.75
2.75
2.75
2.75
2.75
2.75
3.75
2.75
2.75
2.75
3.75
3.75
2.75
2.75
2.75
2.75
3.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
11.00
3.25
5.75
3.75
2.75
3.50
2.75
3.50
3.50
2.75
2.75
2.75
3.50
2.75
2.75
2.75
3.75
3.75
2.75
Nov 2012
Q02-00268
Q02-00269
Q02-00270
Q02-00271
Q02-00278
Q02-00283
Q06-00295
Q06-00305
Q06-00306
Q06-00308
Q06-00309
Q06-00310
Q06-00311
Q06-00313
Q06-00314
Q06-00315
Q06-00318
Q06-00320
Q06-00324
Q06-00350
Q06-00425
Q04-00464
Q04-00465
Q04-00466
Q04-00473
Q04-00478
Q04-00480
Q04-00483
Q04-00484
Q04-00489
Q04-00491
Q09-00507
Q09-00511
Q09-00515
Q09-00517
Q09-00518
Q09-00519
Q09-00520
Q09-00521
Q09-00522
Q09-00523
Q09-00524
Q09-00525
Q09-00526
Q09-00527
Q09-00529
Q09-00530
Q09-00531
Q09-00532
Q09-00533
2.75
2.75
2.75
2.75
3.75
2.75
2.75
3.75
3.50
3.75
2.75
3.75
3.75
2.75
2.75
2.75
2.75
3.75
2.75
8.50
3.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
3.50
2.75
3.50
3.50
3.75
2.75
2.75
2.75
3.50
2.75
3.50
2.75
2.75
2.75
2.75
3.75
2.75
3.75
Nov 2012
Q09-00538
Q10-00539
Q10-00540
Q10-00541
Q10-00542
Q10-00543
Q10-00549
Q10-00550
Q10-00552
Q10-00553
Q10-00558
Q09-00576
Q07-00584
Q07-00585
Q14-00612
Q14-00613
Q14-00614
Q14-00615
Q14-00616
Q14-00617
Q14-00618
Q14-00619
Q14-00621
Q14-00623
Q19-00624
Q19-00626
Q22-00634
Q23-00635
Q16-00636
Q23-00637
Q12-00640
Q12-00641
Q12-00642
Q12-00643
Q13-00650
Q13-00651
Q13-00658
Q13-00659
Q13-00662
Q13-00664
Q13-00665
Q13-00670
Q13-00671
Q13-00673
Q13-00674
Q13-00675
Q13-00676
Q13-00677
Q13-00678
Q13-00679
2.75
3.75
2.75
2.75
3.50
3.50
2.75
3.75
2.75
2.75
4.25
2.75
2.75
2.75
7.25
7.25
7.25
9.25
9.25
7.25
25.00
7.25
7.25
6.00
3.25
5.75
3.75
28.00
77.50
50.00
3.75
5.25
3.75
3.75
30.75
211.25
42.00
1,027.00
114.00
55.50
1,438.75
57.00
216.00
25.00
88.75
49.50
48.00
92.50
122.75
19.75
Q13-00683
Q13-00684
Q13-00686
Q11-00688
Q11-00689
Q11-00690
Q11-00691
Q13-00692
Q11-00702
Q11-00708
Q09-00726
Q14-00781
Q14-00782
Q14-00783
Q14-00784
Q14-00787
Q14-00788
Q14-00789
Q14-00790
Q14-00791
Q14-00793
Q14-00794
Q14-00795
Q14-00796
Q14-00797
Q14-00799
Q14-00800
Q14-00801
Q14-00802
Q14-00804
Q14-00805
Q14-00806
Q14-00808
Q11-00840
Q11-00845
Q11-00846
Q11-00848
Q11-00850
Q11-00853
Q11-00854
Q11-00859
Q11-00860
Q11-00866
Q20-00868
Q20-00869
Q20-00870
Q19-00875
Q19-00878
Q11-00883
Q12-00889
149.25
116.00
250.50
3.75
3.75
11.25
12.75
101.25
5.75
3.75
3.75
17.00
7.25
7.25
7.25
6.50
12.50
6.00
7.25
11.50
18.00
11.00
16.25
9.25
7.25
16.25
12.50
7.25
9.25
6.50
29.75
41.25
13.75
2.75
2.75
2.75
2.75
2.75
3.50
3.50
2.75
5.75
5.50
5.25
4.75
4.75
7.25
11.00
2.75
2.75
Q12-00891
Q03-00905
Q21-00922
Q15-00926
Q15-00932
Q15-00933
Q15-00934
Q15-00941
Q15-00942
Q15-00943
Q13-00945
Q13-00946
Q21-00949
Q23-00952
Q15-00960
Q15-00960
Q15-00964
Q15-00965
Q10-00968
Q10-00996
Q11-01000
Q11-01005
Q11-01006
Q11-01026
Q11-01035
Q11-01036
Q05-01041
Q05-01042
Q05-01049
Q14-01100
Q14-01101
Q06-01109
Q14-01111
Q14-01112
Q19-01113
Q02-01119
Q19-01120
Q09-01121
Q19-01122
Q14-01132
Q11-01139
Q14-01144
Q19-01147
Q14-01148
Q15-01149
Q16-01160
Q16-01167
Q15-01199
Q13-01202
Q06-01206
3.75
3.50
7.50
7.50
3.50
6.75
3.50
3.50
3.75
3.75
3.75
3.75
6.25
50.00
9.25
9.25
9.25
5.25
2.75
2.75
2.75
2.75
2.75
5.75
9.25
5.00
3.75
3.75
2.75
9.25
9.25
3.75
7.25
11.00
25.00
3.75
19.00
2.75
3.75
7.25
3.75
7.25
11.50
55.25
9.25
52.25
37.50
5.75
53.50
3.50
Page - 11
Q06-01207
Q06-01208
Q21-01260
Q13-01278
Q13-01278
Q13-01279
Q13-01280
Q14-01281
Q14-01281
Q04-01327
Q14-01357
Q25-01565
Q06-01636
Q13-01682
Q13-01721
Q13-01802
Q22-01803
Q22-01804
Q22-01806
Q25-01819
Q22-01977
Q21-01994
Q21-01994
Q25-02096
Q25-02097
Q06-02103
Q19-02343
Q10-02372
Q09-02392
Q09-02393
Q09-02393
Q15-02477
Q09-02493
Q09-02494
Q14-02526
Q14-02529
Q14-02530
Q14-02531
Q16-02545
Q14-02574
Q14-02726
Q06-02802
Q14-02865
Q11-02955
Q14-03261
Q23-03307
Q23-03308
Q10-03322
Q10-03322
Q21-03345
5.25
3.75
12.75
16.25
16.25
11.00
35.75
19.75
19.75
2.75
7.25
21.50
3.75
92.50
461.50
1,420.25
3.00
3.00
5.75
33.50
5.75
36.25
41.25
89.50
109.75
2.75
11.00
3.50
2.75
2.75
2.75
3.50
2.75
2.75
8.00
10.25
12.75
6.50
6.75
7.00
11.75
2.75
23.00
6.50
31.75
25.00
5.00
9.25
25.00
Page - 12
Q14-03351
Q14-03353
Q23-03419
Q09-03462
Q25-03464
Q25-03464
Q25-03484
Q21-03512
Q25-03527
Q25-03528
Q25-03583
Q25-03584
Q25-03585
Q25-03586
Q25-03595
Q25-03596
Q21-03614
Q21-03614
Q21-03614
Q23-03615
Q23-03617
Q25-03618
Q25-03619
Q25-03633
Q25-03634
Q23-03639
Q25-03640
Q25-03642
Q25-03643
Q23-03645
Q23-03646
Q30-03690
Q25-03699
Q23-03710
Q25-03711
Q30-03725
Q04-03752
Q26-03755
Q23-03759
Q23-03760
Q30-03764
Q30-03778
Q30-03781
Q30-03781
Q25-03785
Q23-03786
Q23-03791
Q23-03798
Q30-03825
Q23-03827
6.50
6.50
35.00
2.75
21.50
21.50
21.50
15.50
87.25
140.50
103.25
156.50
163.75
17.00
179.50
113.75
41.25
23.00
41.25
49.75
26.75
17.00
17.00
156.50
25.00
45.50
21.50
21.50
17.00
61.25
43.50
1,184.75
106.75
72.75
37.50
1,184.75
3.75
15.25
145.00
171.75
1,184.75
34.00
1,184.75
1,184.75
17.00
132.75
123.00
149.75
109.50
264.00
Q23-03828
Q23-03829
Q23-03830
Q23-03831
Q23-03832
Q23-03833
Q23-03834
Q10-03838
244.00
453.25
56.50
65.50
64.75
59.25
57.00
6.00
PL-01
PL-02
PL-03
PL-04
PL-05
PL-06
PL-07
PL-08
PL-09
PL-10
PL-11
PL-12
PL-13
PL-14
PL-15
PL-16
PL-17
PL-18
PL-19
PL-20
PL-21
PL-22
PL-23
PL-24
PL-25
PL-26
PL-27
PL-40
PL-41
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
25.00
Use PL-16
25.00
25.00
25.00
25.00
25.00
25.00
30.00
40.00
100.00
25.00
100.00
PL-50
PL-51
PL-91
PL-92
PL-93
7.00
N/A
30.00
30.00
30.00
Nov 2012

Lathe Parts Catalog - Logan Actuator Co.

Transcription

Similar documents

HOW TO ORDER REPAIR PARTS

COMMUNITY RESOURCE GUIDE