Stainless Steel Trough Urinal - to visit Washware Essentials website

Transcription

WASHWARE ESSENTIALS LTD
Stainless Steel Trough Urinal
Stainless Steel Urinals—UWHA
Product Code UWHA
Material
Manufactured from 1.6mm thick stainless steel with a satin finish.
Length
The urinal is available in five standard lengths: 1200 mm, 1500 mm,
1800 mm, 2100 mm and 2400 mm.
Waste Outlet
All urinals are supplied with a 50 mm (2”) BSP dome grated waste
fitting positioned centrally
Flushing System
All urinals are fitted with a sparge system concealed within the units’
construction. The sparge system connection to the flushpipe is top entry
for an exposed surface mounted cistern (see fig 1). By using an elbow
fitting the sparge system connection can be easily converted to back
entry for a concealed duct mounted cistern.
Flushpipe
Urinals are supplied with 22 mm diameter stainless steel flushpipes and
wall fixing clips. The length of each flushpipe allows for its cistern to
be mounted at the maximum recommended height.
Cistern
All urinals are supplied with plastic or optional stainless steel automatic
flushing cisterns. Each cistern is complete with lid, syphon and petcock.
The recommended mounting height is 1800 mm minimum and 2000mm
maximum from the underside of the cistern to finished floor level .
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
Web: www.washwareessentials.co.uk
E-mail: [email protected]
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
Stainless Steel Urinal Trough
Wall Hung Urinal—UWHC
Product Code UWHC
Material
Length
The urinal is available to order online in eight standard lengths: 1200
mm, 1500 mm, 1800 mm, 2100 mm, 2400 mm, 2700mm, 3000mm,
and 3300mm. The urinal is also available manufactured in one piece in
any size up to and including 3300mm
Waste Outlet
The urinals are supplied with a 38 mm (1 1/2”) BSP white plastic
dome grated waste fitting positioned left, right, or centrally.
Flushing System
All urinals are fitted with a vandal resistant sparge pipe. The sparge
pipe connection to the flushpipe is top entry for an exposed surface
mounted cistern, or can alternatively be supplied with a back entry
connection for a concealed duct mounted cistern.
Cistern & Flushpipe
The urinals are supplied with a stainless steel automatic flushing
cistern. Each cistern is complete with lid, syphon and petcock.
Specials
The urinals can be supplied as two or more separate units with their
own wastes and cisterns for lengths in excess of 3300mm, or for
corner installations. Cover trims and / or corner cappings are supplied
with these urinals.
Click here to visit Washware Essentials Website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
TIME
Floor Standing Trough Urinal
Stainless Steel Urinals
Product Code FSTU
Polished end panels suitable for wall fixing or exposed installation.
Raised trough with front removable access cover.
Length
The urinal is available to order online in five standard lengths: 1200
mm, 1500 mm, 1800 mm, 2100 mm, and 2400 mm. The urinal can
also be manufactured in one piece in any size up to and including
3300mm.
Waste Outlet
The trough urinals are supplied with a 38 mm (1 1/2”) BSP white
plastic dome grated waste fitting positioned left, right, or centrally
Flushing System
mounted cistern or can be supplied with a back entry connection for a
concealed duct mounted cistern.
Cistern & Flushpipe
cistern. Each cistern is complete with lid, syphon and petcock.
Specials
corner installations. Cover trims and / or corner cappings are supplied
with these urinals.
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
Phone: 01275 390603
Phone: 01275 338064
Web:[email protected]
www.washwareessentials.co.uk
E-mail:
TIME
Floor Standing Slab Urinal
Product Code FSS
Polished end panels suitable for wall fixing or exposed installation.
Raised trough with front removable access cover.
Length
mm, 1500 mm, 1800 mm, 2100 mm, and 2400 mm. The urinal is
also available manufactured in one piece in any size up to and
including 3300mm.
Waste Outlet
The urinals are supplied with a 38 mm (1 1/2”) BSP white plastic
dome grated waste fitting positioned left, right, or centrally
Flushing System
mounted cistern or can be supplied with a back entry connection for
a concealed duct mounted cistern.
Cistern & Flushpipe
cisterns. Each cistern is complete with lid, syphon and petcock.
Specials
corner installations. Cover trims and / or corner cappings are
supplied with these urinals.
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
TIME
Floor Recessed Slab Urinal
Product Code FRS
Polished flat end panels suitable for wall fixing or exposed
installation. The trough is designed to be recessed into the floor.
Length
mm, 1500 mm, 1800 mm, 2100 mm, and 2400 mm. The urinal can also
be manufactured in one piece in any size up to and including 3300mm.
Waste Outlet
The urinals are supplied with a 38 mm (1.5”) BSP dome grated waste
fitting positioned left, right, or centrally
Flushing System
mounted cistern or can be supplied with a back entry connection for a
Cistern & Flushpipe
The urinals are supplied with a stainless steel automatic flushing cistern.
Each cistern is complete with lid, syphon and petcock.
Specials
own wastes and cisterns for lengths in excess of 3300mm, or for corner
installations. Cover trims and / or corner cappings are supplied with
these urinals.
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
TIME
Stainless Steel Rounded
Bowl Urinal-RBU
Product Code: RBU
Design
The rounded bowl urinal is manufactured from 1.2mm thick stainless
steel with a satin finish. The rounded bowl urinal is available as a single
bowl or in range form of 1, 2, 3 or 4 bowls with cistern and pipe-work
to order online, and can be ordered in ranges of up to 6 urinals by
request.
Waste
The stainless steel rounded bowl urinals are supplied with a 38 mm
(1 1/2”) BSP plastic dome grated waste fitting.
Flushing System
The rounded bowl urinals are supplied with a water spreader with a
water inlet connection to suit 15 mm diameter pipework. The water
inlet connection to the flushpipe is top entry for an exposed surface
mounted cistern or back entry for a concealed duct mounted cistern.
Cistern & Flushpipe
In range form bowl urinals are supplied with stainless steel pipework,
fixing clips and pipe fittings.
In range form the bowl urinals are supplied as standard with a steel
automatic flushing cistern. Each cistern is complete with lid, syphon
and petcock.
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
TIME
Stainless Steel Shrouded
Bowl Urinals
Product Code SSBU
Design
The shrouded bowl urinal is manufactured from stainless steel with a satin finish. The
shrouded bowl urinal is available as a single bowl or in range form of 1, 2, 3 or 4
bowls with cistern and pipework.
Waste
The shrouded bowl urinals are supplied with a 32 mm (11/4”) BSP flush grated waste
fitting.
The waste is designed as standard to go out through the back wall.
If a surface mounted waste pipe is required a hole will need to be cut in the base of
the shroud on site by the installer.
Flushing System
The shrouded bowl urinals are supplied with a chrome plated spreader assembly and
water inlet fitting to suit 15 mm diameter pipework. The water inlet connection to the
flushpipe is top entry for an exposed surface mounted cistern or back entry for a
Cistern & Flushpipe
In range form bowl urinals are supplied with 22 mm diameter stainless steel pipework,
In range form the bowl urinals are supplied with a plastic automatic flushing cisterns.
Each cistern is complete with lid, syphon and petcock. The recommended mounting
height is 1800 mm minimum and 2000 mm maximum from the underside of the cistern
to finished floor level.
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
Phone: 01275 338064
Web:[email protected]
www.washwareessentials.co.uk
E-mail:
TIME
Stainless Steel Square Bowl
Urinal-SQBU
Product Code: SQBU
Design
The square bowl urinal is manufactured from 1.2mm thick stainless
steel with a satin finish. The square bowl urinal is available as a single
bowl or in range form of 1, 2, 3 or 4 bowls with cistern and pipework to
order online, and can be ordered in ranges of up to 6 urinals by request.
Waste
The square bowl urinals are supplied with a 38 mm (1 1/2”) BSP
plastic dome grated waste fitting.
Flushing System
The square bowl urinals are supplied with a water spreader with a water
inlet connection to suit 15 mm diameter pipework. The water inlet
connection to the flushpipe is top entry for an exposed surface mounted
cistern or back entry for a concealed duct mounted cistern.
Cistern & Flushpipe
In range form bowl urinals are supplied with stainless steel pipework,
In range form the bowl urinals are supplied with a stainless steel
automatic flushing cistern. Each cistern is complete with lid, syphon
and petcock.
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
TIME
THE INTELLIGENT FLUSH CONTROL
WATER CONSERVATION SYSTEM
Every urinal cistern can waste an incredible
amount of water. Water you pay for that is, in
every literal sense, money down the drain.
An intelligent solution to end this waste has been
developed by Marnic Technology. A sophisticated
automatic control system installed in minutes to
give years of trouble free service, the Marnic
Water Watch will significantly reduce your water
consumption and bills whilst maintaining the
necessary high level of hygiene at all times.
FEATURES
♦
Low cost. In only a few months you will
have recovered the cost of the system
and then continue to enjoy significant
savings on your bill year after year.
♦
Battery or mains power operation.
♦
Long battery life. Ultra low power
consumption means complete safety and
batteries that last for years.
♦
Small and unobtrusive, our vandal
resistant design is unlikely to attract any
unwanted attention.
♦
WRC approved valve.
♦
Microprocessor based design and quartz
crystal clock control provide reliability
and a full water audit facility to monitor
system performance.
♦
A simple reliable solenoid water valve, is
UK WRC approved.
♦
Water Audit facilities available both prior
and subsequent to installation to
establish water consumption savings.
HOW IT WORKS
Urinal cisterns flush each time the cistern fills, often more
than three times an hour, even when your building is
unoccupied at night or closed for holidays. Most of this
expensive water goes to waste.
The Marnic Water Watch system detects when the facility
has been used, allows the cistern to fill which then flushes
the urinal in the normal way.
An additional feature ensures that during long periods of
inactivity, weekends and holidays, the urinal is flushed at
least once every 12 or 24 hours as selected. In this way the
hygiene flush keeps the urinals clean and fresh even when
the building is unattended.
WATER AUDIT FEATURE
Water cost reductions of 90%
have been demonstrated to many
of our customers using a water
audit feature which
enables the volume of water used
to be monitored after
installation and compared with the
pre–installed usage.
90% Water
Savings !
Washware Essentials Ltd
Kestrel Court
Harbour Road
Portishead
Bristol, BS20 7AN
Tel: 01275 390603
email: [email protected]
web: www.washwareessentials.co.uk
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
General Stainless Steel Urinal
Installation Guidelines
General Urinal Installation Instructions
Stainless steel wall hung trough urinals should be installed at an appropriate
height to suit the age of the users. As a general guide juniors have a
recommended height of 510mm from the floor to the top edge of the trough
(channel) and adults 610mm.
All urinals should be installed with the top edge of the urinal level.
For wall hung trough urinals the wall mounting brackets should be screwed
to the wall, and then the urinal securely slid down on to them, the urinal can
then be secured to the wall with the fixing holes at the bottom.
For floor standing urinals the fixing holes on the flanges should be used to fix the urinal back to
the wall.
The urinal waste supplied needs to be fitted to the outlet hole in the urinal channel and can
be connected up to a suitably sized trap and your waste pipe work.
The stainless steel flush pipe supplied should be connected to the inlet stub pipe on the urinal with
the supplied chrome plated brass compression fitting. The flush pipe is sized to suit the optimum
mounting height of the auto flushing cistern.
The auto syphon should be installed into the hole in the bottom of the cistern casing with
the washers and nut supplied with the syphon.
The cistern supplied should be fitted to the wall level and with suitable wall fixings (not supplied).
The cistern should be installed at a height so that the stainless steel flush pipe enters the syphon
tail by a maximum of 25mm. The flush pipe is fixed to the syphon tail with the supplied cap nut
and rubber o ring. The flush pipe can be cut down slightly if required.
The flush pipe should be secured to the wall with the stainless steel down pipe clip supplied.
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
General Stainless Steel Urinal
Installation Guidelines
The petcock supplied should be connected to your water supply pipe with with a
proprietry tap connector (not supplied).
The petcock regulates the flow of water into the cistern which will determine how
often the cistern will flush. The water supply can be regulated by the screw fitting in
the end of the petcock.
For the first flush we recommend that you fill the cistern quickly with a bucket, rather than via the
petcock.
If the auto cistern doesn’t flush properly straight away there may be a couple of causes:


The down pipe has been installed too far into the syphon tail. Check the dimension, trim
as necessary and re-install. The maximum the down pipe should enter the syphon tail is
25mm.
An air lock in the syphon or pipework. Fill the cistern quickly with a bucket of water to
expel any trapped air out of the system.
Earthing Continuity
All urinals are provided with a number of fixing points on to which an earthing continuity
wire with an end terminal can be secured.
How An Auto Syphon Works
Auto syphons are a vertical outlet tube covered by a bell casing with a
small gap at the base.
When the water level in the cistern rises the water level in the bell
casing rises as well. Once the water level reaches the top of the vertical
outlet tube the water will pour down the outlet tube and down the flush
pipe (a). This starts a syphon action inside the bell casing which
empties the water in the cistern. Once the water level gets below the
gap in the bell housing base the syphon action is broken and the flush
stops. The whole process then starts again with the cistern filling up.
Washware Essentials continue to pursue a policy of constant product improvement and development. We reserve the right to alter and improve all products without
prior notice. Products may therefore differ slightly in specification or visual effect from those illustrated. The information provided is for general guidance only and
does not constitute professional advice and is subject to change. We recommend that all installations are undertaken by a professional qualified plumber /
electrician, and it is the installers responsibility to ensure the installation meets the relevant guidelines and regulations.
Care Maintenance & Cleaning
Looking After Your Stainless Steel Urinals
After Installation of the Stainless Steel Urinal
After installation of the stainless steel urinal the whole urinal should be thoroughly cleaned and
washed down with a mild soap / detergent solution and water. This will remove any debris that has
been left on the urinal during the installation process. Deposits can be left on the urinal which will
discolour from items such as: steel nails, screws, paint tins, tools, grinding deposits etc.
Routine Care and Maintenance of Stainless Steel Urinals
Stainless steel urinals like any other product require routine cleaning.
Stainless steel urinals should be cleaned with a mild soap or detergent solution and water. A regular
wipe down with a sponge or cloth with the mild soap / detergent solution will prevent the build up of
dirt and deposits and keep the urinal in good condition. Rinse with clean water afterwards.
Regular weekly cleaning should be sufficient.
Cleaning of Stubborn Stains on Stainless Steel Urinals
If stubborn stains and deposits have been allowed to build up then a cream cleanser that is suitable for
use on stainless steel can be used. A nylon kitchen pad or brush can also be used to remove built up
dirt and deposits, again use with the mild soap / detergent solution.
Bleach
Bleach or any bleach based product or products containing sodium hypochlorite should never be used
on stainless steel products. If this is used on or accidently spilt on the stainless steel it will need to be
quickly cleaned and rinsed off before irreparable damage is done to the stainless steel.
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
TIME

Stainless Steel Trough Urinal - to visit Washware Essentials website

Transcription

Similar documents

kik-step®

Guardian GLHL-SS GLHR-SS

Skate Deterrents

Printable PDF – KE300TH

Product sheet BBPE050.4A

Fiche semeca chaudronnerie Vang 1.1

Feature Sheet

Vetus Cowl Vent Sizes and Specifications

ISO 9001:2008